[UTC 2018-12-13 17:38:16] 17:38:17 Received message from Master: op=Log open serial=124029 17:38:17 Log file open: Observatory C:\PKZPrograms\Logs\20181212 \ PKZ20181213173817_Observatory.txt 17:38:17 Previous log file: 17:38:21 Received message from Master: op=Log directory change serial=124031 17:38:21 Log file directory changed from C:\PKZPrograms\Logs\20181212 to C:\PKZPrograms\Logs\20181213 17:38:21 Log file name is PKZ20181213173821_Observatory.txt 17:45:27 Received message from Master: op=Identify serial=124039 17:55:27 No messages received for 10 min. 6394 sent since last one of these. 17:55:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 17:55:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 17:55:27 MsgArea S: [UTC 2018-12-13 17:55:52] 18:05:27 No messages received for 10 min. 0 sent since last one of these. 18:05:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 18:05:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:05:27 MsgArea S: 18:15:27 No messages received for 10 min. 0 sent since last one of these. 18:15:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 18:15:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:15:27 MsgArea S: [UTC 2018-12-13 18:15:52] 18:25:27 No messages received for 10 min. 0 sent since last one of these. 18:25:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 18:25:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:25:27 MsgArea S: 18:35:27 No messages received for 10 min. 0 sent since last one of these. 18:35:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 18:35:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:35:27 MsgArea S: [UTC 2018-12-13 18:35:52] 18:45:27 No messages received for 10 min. 0 sent since last one of these. 18:45:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 18:45:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:45:27 MsgArea S: 18:55:27 No messages received for 10 min. 0 sent since last one of these. 18:55:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 18:55:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:55:27 MsgArea S: [UTC 2018-12-13 18:55:52] 19:05:27 No messages received for 10 min. 0 sent since last one of these. 19:05:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 19:05:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:05:27 MsgArea S: 19:15:27 No messages received for 10 min. 0 sent since last one of these. 19:15:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 19:15:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:15:27 MsgArea S: [UTC 2018-12-13 19:15:52] 19:25:27 No messages received for 10 min. 0 sent since last one of these. 19:25:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 19:25:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:25:27 MsgArea S: 19:35:27 No messages received for 10 min. 0 sent since last one of these. 19:35:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 19:35:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:35:27 MsgArea S: [UTC 2018-12-13 19:35:52] 19:45:27 No messages received for 10 min. 0 sent since last one of these. 19:45:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 19:45:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:45:27 MsgArea S: 19:55:27 No messages received for 10 min. 0 sent since last one of these. 19:55:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 19:55:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:55:27 MsgArea S: [UTC 2018-12-13 19:55:52] 20:05:27 No messages received for 10 min. 0 sent since last one of these. 20:05:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 20:05:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:05:27 MsgArea S: 20:15:27 No messages received for 10 min. 0 sent since last one of these. 20:15:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 20:15:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:15:27 MsgArea S: [UTC 2018-12-13 20:15:52] 20:25:27 No messages received for 10 min. 0 sent since last one of these. 20:25:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 20:25:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:25:27 MsgArea S: 20:35:27 No messages received for 10 min. 0 sent since last one of these. 20:35:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 20:35:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:35:27 MsgArea S: [UTC 2018-12-13 20:35:52] 20:45:27 No messages received for 10 min. 0 sent since last one of these. 20:45:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 20:45:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:45:27 MsgArea S: 20:55:27 No messages received for 10 min. 0 sent since last one of these. 20:55:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 20:55:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:55:27 MsgArea S: [UTC 2018-12-13 20:55:52] 21:05:27 No messages received for 10 min. 0 sent since last one of these. 21:05:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 21:05:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:05:27 MsgArea S: 21:15:27 No messages received for 10 min. 0 sent since last one of these. 21:15:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 21:15:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:15:27 MsgArea S: [UTC 2018-12-13 21:15:52] 21:25:27 No messages received for 10 min. 0 sent since last one of these. 21:25:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 21:25:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:25:27 MsgArea S: 21:35:27 No messages received for 10 min. 0 sent since last one of these. 21:35:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 21:35:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:35:27 MsgArea S: [UTC 2018-12-13 21:35:52] 21:45:27 No messages received for 10 min. 0 sent since last one of these. 21:45:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 21:45:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:45:27 MsgArea S: 21:55:27 No messages received for 10 min. 0 sent since last one of these. 21:55:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 21:55:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:55:27 MsgArea S: [UTC 2018-12-13 21:55:52] 22:05:27 No messages received for 10 min. 0 sent since last one of these. 22:05:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 22:05:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:05:27 MsgArea S: 22:15:27 No messages received for 10 min. 0 sent since last one of these. 22:15:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 22:15:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:15:27 MsgArea S: [UTC 2018-12-13 22:15:52] 22:25:27 No messages received for 10 min. 0 sent since last one of these. 22:25:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 22:25:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:25:27 MsgArea S: 22:35:27 No messages received for 10 min. 0 sent since last one of these. 22:35:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 22:35:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:35:27 MsgArea S: [UTC 2018-12-13 22:35:52] 22:45:27 No messages received for 10 min. 0 sent since last one of these. 22:45:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 22:45:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:45:27 MsgArea S: 22:55:27 No messages received for 10 min. 0 sent since last one of these. 22:55:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 22:55:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:55:27 MsgArea S: [UTC 2018-12-13 22:55:52] 23:05:27 No messages received for 10 min. 0 sent since last one of these. 23:05:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 23:05:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:05:27 MsgArea S: 23:15:27 No messages received for 10 min. 0 sent since last one of these. 23:15:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 23:15:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:15:27 MsgArea S: [UTC 2018-12-13 23:15:52] 23:25:27 No messages received for 10 min. 0 sent since last one of these. 23:25:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 23:25:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:25:27 MsgArea S: 23:35:27 No messages received for 10 min. 0 sent since last one of these. 23:35:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 23:35:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:35:27 MsgArea S: [UTC 2018-12-13 23:35:52] 23:45:27 No messages received for 10 min. 0 sent since last one of these. 23:45:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 23:45:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:45:27 MsgArea S: 23:55:27 No messages received for 10 min. 0 sent since last one of these. 23:55:27 MsgArea H: nextMessageSerial=124042 startMsgs=68 nextFree=13872 maxMsg=65468 23:55:27 MsgArea Q: Master=13260:13668 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:55:27 MsgArea S: [UTC 2018-12-13 23:55:52] 23:57:08 Received message from Master: op=PointingHead serial=124043 23:57:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:57:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:57:08 Point started: ret=0 23:57:08 point_skyscan result=0 23:57:09 Check angles 23:57:09 SkyScan query 23:57:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:57:10 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:57:10 Message to Master queued w/err=0: serial=124043 error=0 23:57:15 Received message from Master: op=Filter serial=124044 23:57:15 Color wheel filter change from 2 to 2 23:57:15 FLIGetFilterPos err=0 currentPosition=2 23:57:15 FLIGetStepsRemaining err=0 RemainingSteps=0 23:57:15 Filter is already there-color wheel unchanged 23:57:15 Received message from Master: op=Shutter serial=124045 23:57:15 Shutter LASER close 23:57:16 Received message from Camera: op=State serial=124047 23:57:16 GetSingleValue result=40 Value=cccccccc 23:57:16 SkyScan query 23:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:57:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:57:17 Parameters OK 23:57:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:57:17 Set A/D data flow result=40 23:57:17 Set A/D channel type result=40 23:57:17 Set A/D encoding result=40 23:57:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:57:17 Set channel filter=0.000000e+000 result=40 23:57:17 Config A/D Result=40 23:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:57:17 Get A/D filter: -9.255963e+061 result=40 23:57:17 Get A/D value=-858993460 result=40 23:57:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:57:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:57:17 Parameters OK 23:57:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:57:17 Set A/D data flow result=40 23:57:17 Set A/D channel type result=40 23:57:17 Set A/D encoding result=40 23:57:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:57:17 Set channel filter=0.000000e+000 result=40 23:57:17 Config A/D Result=40 23:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:57:17 Get A/D filter: -9.255963e+061 result=40 23:57:17 Get A/D value=-858993460 result=40 23:57:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:57:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:57:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:57:17 Aux= 23:57:17 Message to Camera, serial 124047 queued 23:57:23 Received message from Master: op=PointingHead serial=124058 23:57:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:57:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:57:23 Point started: ret=0 23:57:23 point_skyscan result=0 23:57:24 Check angles 23:57:24 SkyScan query 23:57:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:57:24 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:57:24 Message to Master queued w/err=0: serial=124058 error=0 23:57:29 Received message from Master: op=Filter serial=124059 23:57:29 Color wheel filter change from 2 to 2 23:57:29 FLIGetFilterPos err=0 currentPosition=2 23:57:29 FLIGetStepsRemaining err=0 RemainingSteps=0 23:57:29 Filter is already there-color wheel unchanged 23:57:29 Received message from Master: op=Shutter serial=124060 23:57:29 Shutter LASER close 23:57:30 Received message from Camera: op=State serial=124062 23:57:30 GetSingleValue result=40 Value=cccccccc 23:57:30 SkyScan query 23:57:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:57:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:57:30 Parameters OK 23:57:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:57:30 Set A/D data flow result=40 23:57:30 Set A/D channel type result=40 23:57:30 Set A/D encoding result=40 23:57:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:57:30 Set channel filter=0.000000e+000 result=40 23:57:30 Config A/D Result=40 23:57:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:57:30 Get A/D filter: -9.255963e+061 result=40 23:57:30 Get A/D value=-858993460 result=40 23:57:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:57:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:57:30 Parameters OK 23:57:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:57:30 Set A/D data flow result=40 23:57:30 Set A/D channel type result=40 23:57:30 Set A/D encoding result=40 23:57:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:57:30 Set channel filter=0.000000e+000 result=40 23:57:30 Config A/D Result=40 23:57:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:57:30 Get A/D filter: -9.255963e+061 result=40 23:57:30 Get A/D value=-858993460 result=40 23:57:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:57:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:57:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:57:30 Aux= 23:57:30 Message to Camera, serial 124062 queued 23:58:06 Received message from Master: op=PointingHead serial=124074 23:58:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:58:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:58:06 Point started: ret=0 23:58:06 point_skyscan result=0 23:58:07 Check angles 23:58:07 SkyScan query 23:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:58:08 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:58:08 Message to Master queued w/err=0: serial=124074 error=0 23:58:13 Received message from Master: op=Filter serial=124075 23:58:13 Color wheel filter change from 2 to 2 23:58:13 FLIGetFilterPos err=0 currentPosition=2 23:58:13 FLIGetStepsRemaining err=0 RemainingSteps=0 23:58:13 Filter is already there-color wheel unchanged 23:58:13 Received message from Master: op=Shutter serial=124076 23:58:13 Shutter LASER open 23:58:13 Received message from Camera: op=State serial=124078 23:58:13 GetSingleValue result=40 Value=cccccccc 23:58:13 SkyScan query 23:58:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:58:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:14 Parameters OK 23:58:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:14 Set A/D data flow result=40 23:58:14 Set A/D channel type result=40 23:58:14 Set A/D encoding result=40 23:58:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:14 Set channel filter=0.000000e+000 result=40 23:58:14 Config A/D Result=40 23:58:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:14 Get A/D filter: -9.255963e+061 result=40 23:58:14 Get A/D value=-858993460 result=40 23:58:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:14 Parameters OK 23:58:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:14 Set A/D data flow result=40 23:58:14 Set A/D channel type result=40 23:58:14 Set A/D encoding result=40 23:58:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:14 Set channel filter=0.000000e+000 result=40 23:58:14 Config A/D Result=40 23:58:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:14 Get A/D filter: -9.255963e+061 result=40 23:58:14 Get A/D value=-858993460 result=40 23:58:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:58:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:58:14 Aux= 23:58:14 Message to Camera, serial 124078 queued 23:58:22 Received message from Master: op=Shutter serial=124088 23:58:22 Shutter LASER close 23:58:22 Received message from Master: op=PointingHead serial=124092 23:58:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:58:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:58:23 Point started: ret=0 23:58:23 point_skyscan result=0 23:58:24 Check angles 23:58:24 SkyScan query 23:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:58:24 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:58:24 Message to Master queued w/err=0: serial=124092 error=0 23:58:29 Received message from Master: op=Filter serial=124093 23:58:29 Color wheel filter change from 2 to 2 23:58:29 FLIGetFilterPos err=0 currentPosition=2 23:58:29 FLIGetStepsRemaining err=0 RemainingSteps=0 23:58:29 Filter is already there-color wheel unchanged 23:58:29 Received message from Master: op=Shutter serial=124094 23:58:29 Shutter LASER close 23:58:30 Received message from Camera: op=State serial=124096 23:58:30 GetSingleValue result=40 Value=cccccccc 23:58:30 SkyScan query 23:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:58:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:30 Parameters OK 23:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:30 Set A/D data flow result=40 23:58:30 Set A/D channel type result=40 23:58:30 Set A/D encoding result=40 23:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:30 Set channel filter=0.000000e+000 result=40 23:58:30 Config A/D Result=40 23:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:30 Get A/D filter: -9.255963e+061 result=40 23:58:30 Get A/D value=-858993460 result=40 23:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:30 Parameters OK 23:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:30 Set A/D data flow result=40 23:58:30 Set A/D channel type result=40 23:58:30 Set A/D encoding result=40 23:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:30 Set channel filter=0.000000e+000 result=40 23:58:30 Config A/D Result=40 23:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:30 Get A/D filter: -9.255963e+061 result=40 23:58:30 Get A/D value=-858993460 result=40 23:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:58:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:58:30 Aux= 23:58:30 Message to Camera, serial 124096 queued 23:58:38 Received message from Master: op=PointingHead serial=124108 23:58:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 23:58:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 23:58:38 Point started: ret=0 23:58:38 point_skyscan result=0 23:58:39 Check angles 23:58:39 SkyScan query 23:58:40 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.695<-21513 Statuses=0009 0009 23:58:40 Msec=0 True Az=136.38 Ze=-142.695 Az status=0009 Ze status=0009 23:58:40 Check angles 23:58:40 SkyScan query 23:58:40 SkyScan query done: ret=0 az=154.485<-10299 ze=-121.32<-20088 Statuses=0009 0009 23:58:40 Msec=750 True Az=154.485 Ze=-121.32 Az status=0009 Ze status=0009 23:58:41 Check angles 23:58:41 SkyScan query 23:58:41 SkyScan query done: ret=0 az=171.765<-11451 ze=-100.35<-18690 Statuses=0009 0009 23:58:41 Msec=1500 True Az=171.765 Ze=-100.35 Az status=0009 Ze status=0009 23:58:41 Check angles 23:58:41 SkyScan query 23:58:42 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.365<-17291 Statuses=0008 0009 23:58:42 Msec=2250 True Az=176.025 Ze=-79.365 Az status=0008 Ze status=0009 23:58:42 Check angles 23:58:42 SkyScan query 23:58:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.395<-15893 Statuses=0008 0009 23:58:43 Msec=3000 True Az=175.995 Ze=-58.395 Az status=0008 Ze status=0009 23:58:43 Check angles 23:58:43 SkyScan query 23:58:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 23:58:43 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 23:58:43 Message to Master queued w/err=0: serial=124108 error=0 23:58:48 Received message from Master: op=Filter serial=124109 23:58:48 Color wheel filter change from 2 to 0 23:58:48 FLIGetFilterPos err=0 currentPosition=2 23:58:48 FLIGetStepsRemaining err=0 RemainingSteps=0 23:58:55 FLISetFilterPos err=0 rqPosition=0 23:58:55 FLIGetStepsRemaining err=0 RemainingSteps=0 23:58:55 Check after 0.00 sec for filter wheel DIn/CWh=0 23:58:55 FLIGetFilterPos err=0 currentPosition=0 23:58:55 FLIGetStepsRemaining err=0 RemainingSteps=0 23:58:55 Received message from Master: op=Shutter serial=124110 23:58:55 Shutter LASER close 23:58:55 Received message from Camera: op=State serial=124112 23:58:55 GetSingleValue result=40 Value=cccccccc 23:58:55 SkyScan query 23:58:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.51<-15434 Statuses=0008 0008 23:58:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:56 Parameters OK 23:58:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:56 Set A/D data flow result=40 23:58:56 Set A/D channel type result=40 23:58:56 Set A/D encoding result=40 23:58:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:56 Set channel filter=0.000000e+000 result=40 23:58:56 Config A/D Result=40 23:58:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:56 Get A/D filter: -9.255963e+061 result=40 23:58:56 Get A/D value=-858993460 result=40 23:58:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:56 Parameters OK 23:58:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:56 Set A/D data flow result=40 23:58:56 Set A/D channel type result=40 23:58:56 Set A/D encoding result=40 23:58:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:56 Set channel filter=0.000000e+000 result=40 23:58:56 Config A/D Result=40 23:58:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:56 Get A/D filter: -9.255963e+061 result=40 23:58:56 Get A/D value=-858993460 result=40 23:58:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.509998 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:58:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:58:56 Aux= 23:58:56 Message to Camera, serial 124112 queued 23:59:32 Received message from Master: op=PointingHead serial=124125 23:59:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 23:59:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 23:59:33 Point started: ret=0 23:59:33 point_skyscan result=0 23:59:33 Check angles 23:59:33 SkyScan query 23:59:34 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.96<-13464 Statuses=0009 0009 23:59:34 Msec=0 True Az=153.18 Ze=-21.96 Az status=0009 Ze status=0009 23:59:34 Check angles 23:59:34 SkyScan query 23:59:35 SkyScan query done: ret=0 az=135.765<-9051 ze=-0.99<-12066 Statuses=0009 0009 23:59:35 Msec=750 True Az=135.765 Ze=-0.99 Az status=0009 Ze status=0009 23:59:35 Check angles 23:59:35 SkyScan query 23:59:36 SkyScan query done: ret=0 az=118.185<-7879 ze=19.95<-10670 Statuses=0009 0009 23:59:36 Msec=1500 True Az=118.185 Ze=19.95 Az status=0009 Ze status=0009 23:59:36 Check angles 23:59:36 SkyScan query 23:59:36 SkyScan query done: ret=0 az=100.8<-6720 ze=40.92<-9272 Statuses=0009 0009 23:59:36 Msec=2250 True Az=100.8 Ze=40.92 Az status=0009 Ze status=0009 23:59:36 Check angles 23:59:36 SkyScan query 23:59:37 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 23:59:37 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 23:59:37 Check angles 23:59:37 SkyScan query 23:59:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 23:59:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 23:59:38 Message to Master queued w/err=0: serial=124125 error=0 23:59:43 Received message from Master: op=Filter serial=124126 23:59:43 Color wheel filter change from 0 to 0 23:59:43 FLIGetFilterPos err=0 currentPosition=0 23:59:43 FLIGetStepsRemaining err=0 RemainingSteps=0 23:59:43 Filter is already there-color wheel unchanged 23:59:43 Received message from Master: op=Shutter serial=124127 23:59:43 Shutter LASER close 23:59:43 Received message from Camera: op=State serial=124129 23:59:43 GetSingleValue result=40 Value=cccccccc 23:59:43 SkyScan query 23:59:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 23:59:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:59:44 Parameters OK 23:59:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:59:44 Set A/D data flow result=40 23:59:44 Set A/D channel type result=40 23:59:44 Set A/D encoding result=40 23:59:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:59:44 Set channel filter=0.000000e+000 result=40 23:59:44 Config A/D Result=40 23:59:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:59:44 Get A/D filter: -9.255963e+061 result=40 23:59:44 Get A/D value=-858993460 result=40 23:59:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:59:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:59:44 Parameters OK 23:59:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:59:44 Set A/D data flow result=40 23:59:44 Set A/D channel type result=40 23:59:44 Set A/D encoding result=40 23:59:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:59:44 Set channel filter=0.000000e+000 result=40 23:59:44 Config A/D Result=40 23:59:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:59:44 Get A/D filter: -9.255963e+061 result=40 23:59:44 Get A/D value=-858993460 result=40 23:59:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:59:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:59:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:59:44 Aux= 23:59:44 Message to Camera, serial 124129 queued 00:00:20 Received message from Master: op=PointingHead serial=124142 00:00:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:00:20 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:00:21 Point started: ret=0 00:00:21 point_skyscan result=0 00:00:22 Check angles 00:00:22 SkyScan query 00:00:22 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 00:00:22 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 00:00:22 Check angles 00:00:22 SkyScan query 00:00:23 SkyScan query done: ret=0 az=126.285<-8419 ze=38.505<-9433 Statuses=0009 0008 00:00:23 Msec=750 True Az=126.285 Ze=38.505 Az status=0009 Ze status=0008 00:00:23 Check angles 00:00:23 SkyScan query 00:00:24 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 00:00:24 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 00:00:24 Check angles 00:00:24 SkyScan query 00:00:24 SkyScan query done: ret=0 az=161.085<-10739 ze=38.505<-9433 Statuses=0009 0008 00:00:24 Msec=2250 True Az=161.085 Ze=38.505 Az status=0009 Ze status=0008 00:00:25 Check angles 00:00:25 SkyScan query 00:00:25 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:00:25 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:00:25 Check angles 00:00:25 SkyScan query 00:00:26 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:00:26 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:00:26 Message to Master queued w/err=0: serial=124142 error=0 00:00:31 Received message from Master: op=Filter serial=124143 00:00:31 Color wheel filter change from 0 to 0 00:00:31 FLIGetFilterPos err=0 currentPosition=0 00:00:31 FLIGetStepsRemaining err=0 RemainingSteps=0 00:00:31 Filter is already there-color wheel unchanged 00:00:31 Received message from Master: op=Shutter serial=124144 00:00:31 Shutter LASER close 00:00:31 Received message from Camera: op=State serial=124146 00:00:31 GetSingleValue result=40 Value=cccccccc 00:00:31 SkyScan query 00:00:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:00:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:32 Parameters OK 00:00:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:32 Set A/D data flow result=40 00:00:32 Set A/D channel type result=40 00:00:32 Set A/D encoding result=40 00:00:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:32 Set channel filter=0.000000e+000 result=40 00:00:32 Config A/D Result=40 00:00:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:32 Get A/D filter: -9.255963e+061 result=40 00:00:32 Get A/D value=-858993460 result=40 00:00:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:32 Parameters OK 00:00:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:32 Set A/D data flow result=40 00:00:32 Set A/D channel type result=40 00:00:32 Set A/D encoding result=40 00:00:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:32 Set channel filter=0.000000e+000 result=40 00:00:32 Config A/D Result=40 00:00:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:32 Get A/D filter: -9.255963e+061 result=40 00:00:32 Get A/D value=-858993460 result=40 00:00:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:00:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:00:32 Aux= 00:00:32 Message to Camera, serial 124146 queued 00:01:08 Received message from Master: op=PointingHead serial=124159 00:01:08 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:01:08 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:01:09 Point started: ret=0 00:01:09 point_skyscan result=0 00:01:10 Check angles 00:01:10 SkyScan query 00:01:10 SkyScan query done: ret=0 az=152.895<-10193 ze=8.55<-11430 Statuses=0009 0009 00:01:10 Msec=0 True Az=152.895 Ze=8.55 Az status=0009 Ze status=0009 00:01:10 Check angles 00:01:10 SkyScan query 00:01:11 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.405<-12827 Statuses=0009 0009 00:01:11 Msec=750 True Az=135.39 Ze=-12.405 Az status=0009 Ze status=0009 00:01:11 Check angles 00:01:11 SkyScan query 00:01:12 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.78<-14252 Statuses=0009 0009 00:01:12 Msec=1500 True Az=117.54 Ze=-33.78 Az status=0009 Ze status=0009 00:01:12 Check angles 00:01:12 SkyScan query 00:01:12 SkyScan query done: ret=0 az=100.14<-6676 ze=-51.555<-15437 Statuses=0009 0009 00:01:12 Msec=2250 True Az=100.14 Ze=-51.555 Az status=0009 Ze status=0009 00:01:13 Check angles 00:01:13 SkyScan query 00:01:13 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:01:13 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:01:13 Check angles 00:01:13 SkyScan query 00:01:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:01:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:01:14 Message to Master queued w/err=0: serial=124159 error=0 00:01:19 Received message from Master: op=Filter serial=124160 00:01:19 Color wheel filter change from 0 to 0 00:01:19 FLIGetFilterPos err=0 currentPosition=0 00:01:19 FLIGetStepsRemaining err=0 RemainingSteps=0 00:01:19 Filter is already there-color wheel unchanged 00:01:19 Received message from Master: op=Shutter serial=124161 00:01:19 Shutter LASER close 00:01:19 Received message from Camera: op=State serial=124163 00:01:19 GetSingleValue result=40 Value=cccccccc 00:01:19 SkyScan query 00:01:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:01:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:20 Parameters OK 00:01:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:20 Set A/D data flow result=40 00:01:20 Set A/D channel type result=40 00:01:20 Set A/D encoding result=40 00:01:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:20 Set channel filter=0.000000e+000 result=40 00:01:20 Config A/D Result=40 00:01:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:20 Get A/D filter: -9.255963e+061 result=40 00:01:20 Get A/D value=-858993460 result=40 00:01:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:20 Parameters OK 00:01:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:20 Set A/D data flow result=40 00:01:20 Set A/D channel type result=40 00:01:20 Set A/D encoding result=40 00:01:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:20 Set channel filter=0.000000e+000 result=40 00:01:20 Config A/D Result=40 00:01:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:20 Get A/D filter: -9.255963e+061 result=40 00:01:20 Get A/D value=-858993460 result=40 00:01:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:01:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:01:20 Aux= 00:01:20 Message to Camera, serial 124163 queued 00:01:57 Received message from Master: op=PointingHead serial=124176 00:01:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:01:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:01:57 Point started: ret=0 00:01:57 point_skyscan result=0 00:01:58 Check angles 00:01:58 SkyScan query 00:01:58 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.375<-17425 Statuses=0009 0009 00:01:58 Msec=0 True Az=109.14 Ze=-81.375 Az status=0009 Ze status=0009 00:01:58 Check angles 00:01:58 SkyScan query 00:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.345<-18823 Statuses=0008 0009 00:01:59 Msec=750 True Az=112.995 Ze=-102.345 Az status=0008 Ze status=0009 00:01:59 Check angles 00:01:59 SkyScan query 00:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.27<-20218 Statuses=0008 0009 00:02:00 Msec=1500 True Az=112.995 Ze=-123.27 Az status=0008 Ze status=0009 00:02:00 Check angles 00:02:00 SkyScan query 00:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.255<-21617 Statuses=0008 0009 00:02:00 Msec=2250 True Az=112.995 Ze=-144.255 Az status=0008 Ze status=0009 00:02:01 Check angles 00:02:01 SkyScan query 00:02:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.195<-23013 Statuses=0008 0009 00:02:01 Msec=3000 True Az=112.995 Ze=-165.195 Az status=0008 Ze status=0009 00:02:01 Check angles 00:02:01 SkyScan query 00:02:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:02:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:02:02 Message to Master queued w/err=0: serial=124176 error=0 00:02:07 Received message from Master: op=Filter serial=124177 00:02:07 Color wheel filter change from 0 to 0 00:02:07 FLIGetFilterPos err=0 currentPosition=0 00:02:07 FLIGetStepsRemaining err=0 RemainingSteps=0 00:02:07 Filter is already there-color wheel unchanged 00:02:07 Received message from Master: op=Shutter serial=124178 00:02:07 Shutter LASER open 00:02:07 Received message from Camera: op=State serial=124180 00:02:07 GetSingleValue result=40 Value=cccccccc 00:02:07 SkyScan query 00:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:02:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:08 Parameters OK 00:02:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:08 Set A/D data flow result=40 00:02:08 Set A/D channel type result=40 00:02:08 Set A/D encoding result=40 00:02:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:08 Set channel filter=0.000000e+000 result=40 00:02:08 Config A/D Result=40 00:02:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:08 Get A/D filter: -9.255963e+061 result=40 00:02:08 Get A/D value=-858993460 result=40 00:02:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:08 Parameters OK 00:02:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:08 Set A/D data flow result=40 00:02:08 Set A/D channel type result=40 00:02:08 Set A/D encoding result=40 00:02:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:08 Set channel filter=0.000000e+000 result=40 00:02:08 Config A/D Result=40 00:02:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:08 Get A/D filter: -9.255963e+061 result=40 00:02:08 Get A/D value=-858993460 result=40 00:02:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:02:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:02:08 Aux= 00:02:08 Message to Camera, serial 124180 queued 00:02:16 Received message from Master: op=Shutter serial=124190 00:02:16 Shutter LASER close 00:02:17 Received message from Master: op=PointingHead serial=124194 00:02:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:02:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:02:17 Point started: ret=0 00:02:17 point_skyscan result=0 00:02:18 Check angles 00:02:18 SkyScan query 00:02:18 SkyScan query done: ret=0 az=89.505<-5967 ze=156.78<-1548 Statuses=0009 0009 00:02:18 Msec=0 True Az=89.505 Ze=156.78 Az status=0009 Ze status=0009 00:02:19 Check angles 00:02:19 SkyScan query 00:02:19 SkyScan query done: ret=0 az=72<-4800 ze=135.78<-2948 Statuses=0009 0009 00:02:19 Msec=750 True Az=72 Ze=135.78 Az status=0009 Ze status=0009 00:02:19 Check angles 00:02:19 SkyScan query 00:02:20 SkyScan query done: ret=0 az=54.705<-3647 ze=114.855<-4343 Statuses=0009 0009 00:02:20 Msec=1500 True Az=54.705 Ze=114.855 Az status=0009 Ze status=0009 00:02:20 Check angles 00:02:20 SkyScan query 00:02:21 SkyScan query done: ret=0 az=41.01<-2734 ze=93.435<-5771 Statuses=0009 0009 00:02:21 Msec=2250 True Az=41.01 Ze=93.435 Az status=0009 Ze status=0009 00:02:21 Check angles 00:02:21 SkyScan query 00:02:21 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 00:02:21 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 00:02:22 Check angles 00:02:22 SkyScan query 00:02:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 00:02:22 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 00:02:22 Check angles 00:02:22 SkyScan query 00:02:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:02:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:02:23 Message to Master queued w/err=0: serial=124194 error=0 00:02:28 Received message from Master: op=Filter serial=124195 00:02:28 Color wheel filter change from 0 to 0 00:02:28 FLIGetFilterPos err=0 currentPosition=0 00:02:28 FLIGetStepsRemaining err=0 RemainingSteps=0 00:02:28 Filter is already there-color wheel unchanged 00:02:28 Received message from Master: op=Shutter serial=124196 00:02:28 Shutter LASER close 00:02:28 Received message from Camera: op=State serial=124198 00:02:28 GetSingleValue result=40 Value=cccccccc 00:02:28 SkyScan query 00:02:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:02:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:29 Parameters OK 00:02:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:29 Set A/D data flow result=40 00:02:29 Set A/D channel type result=40 00:02:29 Set A/D encoding result=40 00:02:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:29 Set channel filter=0.000000e+000 result=40 00:02:29 Config A/D Result=40 00:02:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:29 Get A/D filter: -9.255963e+061 result=40 00:02:29 Get A/D value=-858993460 result=40 00:02:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:29 Parameters OK 00:02:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:29 Set A/D data flow result=40 00:02:29 Set A/D channel type result=40 00:02:29 Set A/D encoding result=40 00:02:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:29 Set channel filter=0.000000e+000 result=40 00:02:29 Config A/D Result=40 00:02:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:29 Get A/D filter: -9.255963e+061 result=40 00:02:29 Get A/D value=-858993460 result=40 00:02:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:02:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:02:29 Aux= 00:02:29 Message to Camera, serial 124198 queued 00:03:05 Received message from Master: op=PointingHead serial=124210 00:03:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:03:05 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:03:05 Point started: ret=0 00:03:05 point_skyscan result=0 00:03:06 Check angles 00:03:06 SkyScan query 00:03:07 SkyScan query done: ret=0 az=40.995<-2733 ze=21.705<-10553 Statuses=0008 0009 00:03:07 Msec=0 True Az=40.995 Ze=21.705 Az status=0008 Ze status=0009 00:03:07 Check angles 00:03:07 SkyScan query 00:03:07 SkyScan query done: ret=0 az=40.995<-2733 ze=0.66<-11956 Statuses=0008 0009 00:03:07 Msec=750 True Az=40.995 Ze=0.66 Az status=0008 Ze status=0009 00:03:08 Check angles 00:03:08 SkyScan query 00:03:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.655<-13377 Statuses=0008 0009 00:03:08 Msec=1500 True Az=40.995 Ze=-20.655 Az status=0008 Ze status=0009 00:03:08 Check angles 00:03:08 SkyScan query 00:03:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:03:09 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:03:09 Check angles 00:03:09 SkyScan query 00:03:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:03:10 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:03:10 Message to Master queued w/err=0: serial=124210 error=0 00:03:15 Received message from Master: op=Filter serial=124211 00:03:15 Color wheel filter change from 0 to 0 00:03:15 FLIGetFilterPos err=0 currentPosition=0 00:03:15 FLIGetStepsRemaining err=0 RemainingSteps=0 00:03:15 Filter is already there-color wheel unchanged 00:03:15 Received message from Master: op=Shutter serial=124212 00:03:15 Shutter LASER close 00:03:15 Received message from Camera: op=State serial=124214 00:03:15 GetSingleValue result=40 Value=cccccccc 00:03:15 SkyScan query 00:03:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:03:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:15 Parameters OK 00:03:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:15 Set A/D data flow result=40 00:03:15 Set A/D channel type result=40 00:03:15 Set A/D encoding result=40 00:03:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:15 Set channel filter=0.000000e+000 result=40 00:03:15 Config A/D Result=40 00:03:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:15 Get A/D filter: -9.255963e+061 result=40 00:03:15 Get A/D value=-858993460 result=40 00:03:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:15 Parameters OK 00:03:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:15 Set A/D data flow result=40 00:03:15 Set A/D channel type result=40 00:03:15 Set A/D encoding result=40 00:03:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:15 Set channel filter=0.000000e+000 result=40 00:03:15 Config A/D Result=40 00:03:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:15 Get A/D filter: -9.255963e+061 result=40 00:03:15 Get A/D value=-858993460 result=40 00:03:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:03:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:03:15 Aux= 00:03:15 Message to Camera, serial 124214 queued 00:03:52 Received message from Master: op=PointingHead serial=124227 00:03:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:03:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:03:53 Point started: ret=0 00:03:53 point_skyscan result=0 00:03:53 Check angles 00:03:53 SkyScan query 00:03:54 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.43<-16562 Statuses=0009 0009 00:03:54 Msec=0 True Az=64.23 Ze=-68.43 Az status=0009 Ze status=0009 00:03:54 Check angles 00:03:54 SkyScan query 00:03:55 SkyScan query done: ret=0 az=82.05<-5470 ze=-89.85<-17990 Statuses=0009 0009 00:03:55 Msec=750 True Az=82.05 Ze=-89.85 Az status=0009 Ze status=0009 00:03:55 Check angles 00:03:55 SkyScan query 00:03:55 SkyScan query done: ret=0 az=99.6<-6640 ze=-110.805<-19387 Statuses=0009 0009 00:03:55 Msec=1500 True Az=99.6 Ze=-110.805 Az status=0009 Ze status=0009 00:03:56 Check angles 00:03:56 SkyScan query 00:03:56 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.745<-20783 Statuses=0009 0009 00:03:56 Msec=2250 True Az=116.985 Ze=-131.745 Az status=0009 Ze status=0009 00:03:56 Check angles 00:03:56 SkyScan query 00:03:57 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 00:03:57 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 00:03:57 Check angles 00:03:57 SkyScan query 00:03:58 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:03:58 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:03:58 Message to Master queued w/err=0: serial=124227 error=0 00:04:03 Received message from Master: op=Filter serial=124228 00:04:03 Color wheel filter change from 0 to 0 00:04:03 FLIGetFilterPos err=0 currentPosition=0 00:04:03 FLIGetStepsRemaining err=0 RemainingSteps=0 00:04:03 Filter is already there-color wheel unchanged 00:04:03 Received message from Master: op=Shutter serial=124229 00:04:03 Shutter LASER close 00:04:03 Received message from Camera: op=State serial=124231 00:04:03 GetSingleValue result=40 Value=cccccccc 00:04:03 SkyScan query 00:04:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:04:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:04 Parameters OK 00:04:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:04 Set A/D data flow result=40 00:04:04 Set A/D channel type result=40 00:04:04 Set A/D encoding result=40 00:04:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:04 Set channel filter=0.000000e+000 result=40 00:04:04 Config A/D Result=40 00:04:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:04 Get A/D filter: -9.255963e+061 result=40 00:04:04 Get A/D value=-858993460 result=40 00:04:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:04 Parameters OK 00:04:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:04 Set A/D data flow result=40 00:04:04 Set A/D channel type result=40 00:04:04 Set A/D encoding result=40 00:04:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:04 Set channel filter=0.000000e+000 result=40 00:04:04 Config A/D Result=40 00:04:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:04 Get A/D filter: -9.255963e+061 result=40 00:04:04 Get A/D value=-858993460 result=40 00:04:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:04:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:04:04 Aux= 00:04:04 Message to Camera, serial 124231 queued 00:04:40 Received message from Master: op=PointingHead serial=124244 00:04:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:04:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:04:41 Point started: ret=0 00:04:41 point_skyscan result=0 00:04:41 Check angles 00:04:41 SkyScan query 00:04:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 00:04:42 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 00:04:42 Check angles 00:04:42 SkyScan query 00:04:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:04:43 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:04:43 Message to Master queued w/err=0: serial=124244 error=0 00:04:48 Received message from Master: op=Filter serial=124245 00:04:48 Color wheel filter change from 0 to 0 00:04:48 FLIGetFilterPos err=0 currentPosition=0 00:04:48 FLIGetStepsRemaining err=0 RemainingSteps=0 00:04:48 Filter is already there-color wheel unchanged 00:04:48 Received message from Master: op=Shutter serial=124246 00:04:48 Shutter LASER open 00:04:48 Received message from Camera: op=State serial=124248 00:04:48 GetSingleValue result=40 Value=cccccccc 00:04:48 SkyScan query 00:04:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:04:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:49 Parameters OK 00:04:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:49 Set A/D data flow result=40 00:04:49 Set A/D channel type result=40 00:04:49 Set A/D encoding result=40 00:04:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:49 Set channel filter=0.000000e+000 result=40 00:04:49 Config A/D Result=40 00:04:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:49 Get A/D filter: -9.255963e+061 result=40 00:04:49 Get A/D value=-858993460 result=40 00:04:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:49 Parameters OK 00:04:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:49 Set A/D data flow result=40 00:04:49 Set A/D channel type result=40 00:04:49 Set A/D encoding result=40 00:04:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:49 Set channel filter=0.000000e+000 result=40 00:04:49 Config A/D Result=40 00:04:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:49 Get A/D filter: -9.255963e+061 result=40 00:04:49 Get A/D value=-858993460 result=40 00:04:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:04:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:04:49 Aux= 00:04:49 Message to Camera, serial 124248 queued 00:04:57 Received message from Master: op=Shutter serial=124258 00:04:57 Shutter LASER close 00:04:58 Received message from Master: op=PointingHead serial=124262 00:04:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:04:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:04:58 Point started: ret=0 00:04:58 point_skyscan result=0 00:04:59 Check angles 00:04:59 SkyScan query 00:04:59 SkyScan query done: ret=0 az=136.44<-9096 ze=-142.71<-21514 Statuses=0009 0009 00:04:59 Msec=0 True Az=136.44 Ze=-142.71 Az status=0009 Ze status=0009 00:05:00 Check angles 00:05:00 SkyScan query 00:05:00 SkyScan query done: ret=0 az=154.35<-10290 ze=-121.365<-20091 Statuses=0009 0009 00:05:00 Msec=750 True Az=154.35 Ze=-121.365 Az status=0009 Ze status=0009 00:05:00 Check angles 00:05:00 SkyScan query 00:05:01 SkyScan query done: ret=0 az=171.75<-11450 ze=-100.32<-18688 Statuses=0009 0009 00:05:01 Msec=1500 True Az=171.75 Ze=-100.32 Az status=0009 Ze status=0009 00:05:01 Check angles 00:05:01 SkyScan query 00:05:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.425<-17295 Statuses=0008 0009 00:05:02 Msec=2250 True Az=176.01 Ze=-79.425 Az status=0008 Ze status=0009 00:05:02 Check angles 00:05:02 SkyScan query 00:05:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-57.975<-15865 Statuses=0008 0009 00:05:02 Msec=3000 True Az=176.01 Ze=-57.975 Az status=0008 Ze status=0009 00:05:03 Check angles 00:05:03 SkyScan query 00:05:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 00:05:03 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 00:05:03 Message to Master queued w/err=0: serial=124262 error=0 00:05:08 Received message from Master: op=Filter serial=124263 00:05:08 Color wheel filter change from 0 to 0 00:05:08 FLIGetFilterPos err=0 currentPosition=0 00:05:08 FLIGetStepsRemaining err=0 RemainingSteps=0 00:05:08 Filter is already there-color wheel unchanged 00:05:08 Received message from Master: op=Shutter serial=124264 00:05:08 Shutter LASER close 00:05:09 Received message from Camera: op=State serial=124266 00:05:09 GetSingleValue result=40 Value=cccccccc 00:05:09 SkyScan query 00:05:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:05:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:09 Parameters OK 00:05:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:09 Set A/D data flow result=40 00:05:09 Set A/D channel type result=40 00:05:09 Set A/D encoding result=40 00:05:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:09 Set channel filter=0.000000e+000 result=40 00:05:09 Config A/D Result=40 00:05:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:09 Get A/D filter: -9.255963e+061 result=40 00:05:09 Get A/D value=-858993460 result=40 00:05:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:09 Parameters OK 00:05:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:09 Set A/D data flow result=40 00:05:09 Set A/D channel type result=40 00:05:09 Set A/D encoding result=40 00:05:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:09 Set channel filter=0.000000e+000 result=40 00:05:09 Config A/D Result=40 00:05:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:09 Get A/D filter: -9.255963e+061 result=40 00:05:09 Get A/D value=-858993460 result=40 00:05:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:05:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:05:09 Aux= 00:05:09 Message to Camera, serial 124266 queued 00:05:46 Received message from Master: op=PointingHead serial=124279 00:05:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:05:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:05:46 Point started: ret=0 00:05:46 point_skyscan result=0 00:05:47 Check angles 00:05:47 SkyScan query 00:05:48 SkyScan query done: ret=0 az=152.895<-10193 ze=-21.81<-13454 Statuses=0009 0009 00:05:48 Msec=0 True Az=152.895 Ze=-21.81 Az status=0009 Ze status=0009 00:05:48 Check angles 00:05:48 SkyScan query 00:05:48 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.78<-12052 Statuses=0009 0009 00:05:48 Msec=750 True Az=135.405 Ze=-0.78 Az status=0009 Ze status=0009 00:05:49 Check angles 00:05:49 SkyScan query 00:05:49 SkyScan query done: ret=0 az=117.96<-7864 ze=20.145<-10657 Statuses=0009 0009 00:05:49 Msec=1500 True Az=117.96 Ze=20.145 Az status=0009 Ze status=0009 00:05:49 Check angles 00:05:49 SkyScan query 00:05:50 SkyScan query done: ret=0 az=100.44<-6696 ze=41.13<-9258 Statuses=0009 0009 00:05:50 Msec=2250 True Az=100.44 Ze=41.13 Az status=0009 Ze status=0009 00:05:50 Check angles 00:05:50 SkyScan query 00:05:51 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 00:05:51 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 00:05:51 Check angles 00:05:51 SkyScan query 00:05:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:05:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:05:51 Message to Master queued w/err=0: serial=124279 error=0 00:05:56 Received message from Master: op=Filter serial=124280 00:05:56 Color wheel filter change from 0 to 0 00:05:56 FLIGetFilterPos err=0 currentPosition=0 00:05:56 FLIGetStepsRemaining err=0 RemainingSteps=0 00:05:56 Filter is already there-color wheel unchanged 00:05:57 Received message from Master: op=Shutter serial=124281 00:05:57 Shutter LASER close 00:05:57 Received message from Camera: op=State serial=124283 00:05:57 GetSingleValue result=40 Value=cccccccc 00:05:57 SkyScan query 00:05:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:05:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:57 Parameters OK 00:05:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:57 Set A/D data flow result=40 00:05:57 Set A/D channel type result=40 00:05:57 Set A/D encoding result=40 00:05:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:57 Set channel filter=0.000000e+000 result=40 00:05:57 Config A/D Result=40 00:05:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:57 Get A/D filter: -9.255963e+061 result=40 00:05:57 Get A/D value=-858993460 result=40 00:05:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:57 Parameters OK 00:05:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:57 Set A/D data flow result=40 00:05:57 Set A/D channel type result=40 00:05:57 Set A/D encoding result=40 00:05:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:57 Set channel filter=0.000000e+000 result=40 00:05:57 Config A/D Result=40 00:05:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:57 Get A/D filter: -9.255963e+061 result=40 00:05:57 Get A/D value=-858993460 result=40 00:05:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:05:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:05:57 Aux= 00:05:57 Message to Camera, serial 124283 queued 00:06:34 Received message from Master: op=PointingHead serial=124296 00:06:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:06:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:06:34 Point started: ret=0 00:06:34 point_skyscan result=0 00:06:35 Check angles 00:06:35 SkyScan query 00:06:36 SkyScan query done: ret=0 az=109.35<-7290 ze=38.49<-9434 Statuses=0009 0008 00:06:36 Msec=0 True Az=109.35 Ze=38.49 Az status=0009 Ze status=0008 00:06:36 Check angles 00:06:36 SkyScan query 00:06:36 SkyScan query done: ret=0 az=127.02<-8468 ze=38.505<-9433 Statuses=0009 0008 00:06:36 Msec=750 True Az=127.02 Ze=38.505 Az status=0009 Ze status=0008 00:06:37 Check angles 00:06:37 SkyScan query 00:06:37 SkyScan query done: ret=0 az=144.54<-9636 ze=38.505<-9433 Statuses=0009 0008 00:06:37 Msec=1500 True Az=144.54 Ze=38.505 Az status=0009 Ze status=0008 00:06:37 Check angles 00:06:37 SkyScan query 00:06:38 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 [UTC 2018-12-14 00:06:38] 00:06:38 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 00:06:38 Check angles 00:06:38 SkyScan query 00:06:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 00:06:39 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 00:06:39 Check angles 00:06:39 SkyScan query 00:06:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:06:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:06:39 Message to Master queued w/err=0: serial=124296 error=0 00:06:44 Received message from Master: op=Filter serial=124297 00:06:44 Color wheel filter change from 0 to 0 00:06:44 FLIGetFilterPos err=0 currentPosition=0 00:06:44 FLIGetStepsRemaining err=0 RemainingSteps=0 00:06:44 Filter is already there-color wheel unchanged 00:06:45 Received message from Master: op=Shutter serial=124298 00:06:45 Shutter LASER close 00:06:45 Received message from Camera: op=State serial=124300 00:06:45 GetSingleValue result=40 Value=cccccccc 00:06:45 SkyScan query 00:06:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:06:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:06:45 Parameters OK 00:06:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:06:45 Set A/D data flow result=40 00:06:45 Set A/D channel type result=40 00:06:45 Set A/D encoding result=40 00:06:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:06:45 Set channel filter=0.000000e+000 result=40 00:06:45 Config A/D Result=40 00:06:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:06:45 Get A/D filter: -9.255963e+061 result=40 00:06:45 Get A/D value=-858993460 result=40 00:06:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:06:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:06:45 Parameters OK 00:06:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:06:45 Set A/D data flow result=40 00:06:45 Set A/D channel type result=40 00:06:45 Set A/D encoding result=40 00:06:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:06:45 Set channel filter=0.000000e+000 result=40 00:06:45 Config A/D Result=40 00:06:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:06:45 Get A/D filter: -9.255963e+061 result=40 00:06:45 Get A/D value=-858993460 result=40 00:06:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:06:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:06:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:06:45 Aux= 00:06:45 Message to Camera, serial 124300 queued 00:07:22 Received message from Master: op=PointingHead serial=124313 00:07:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:07:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:07:23 Point started: ret=0 00:07:23 point_skyscan result=0 00:07:23 Check angles 00:07:23 SkyScan query 00:07:24 SkyScan query done: ret=0 az=152.955<-10197 ze=8.565<-11429 Statuses=0009 0009 00:07:24 Msec=0 True Az=152.955 Ze=8.565 Az status=0009 Ze status=0009 00:07:24 Check angles 00:07:24 SkyScan query 00:07:25 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.36<-12824 Statuses=0009 0009 00:07:25 Msec=750 True Az=135.375 Ze=-12.36 Az status=0009 Ze status=0009 00:07:25 Check angles 00:07:25 SkyScan query 00:07:25 SkyScan query done: ret=0 az=117.915<-7861 ze=-33.3<-14220 Statuses=0009 0009 00:07:25 Msec=1500 True Az=117.915 Ze=-33.3 Az status=0009 Ze status=0009 00:07:26 Check angles 00:07:26 SkyScan query 00:07:26 SkyScan query done: ret=0 az=100.59<-6706 ze=-51.54<-15436 Statuses=0009 0009 00:07:26 Msec=2250 True Az=100.59 Ze=-51.54 Az status=0009 Ze status=0009 00:07:26 Check angles 00:07:26 SkyScan query 00:07:27 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:07:27 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:07:27 Check angles 00:07:27 SkyScan query 00:07:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:07:28 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:07:28 Message to Master queued w/err=0: serial=124313 error=0 00:07:33 Received message from Master: op=Filter serial=124314 00:07:33 Color wheel filter change from 0 to 0 00:07:33 FLIGetFilterPos err=0 currentPosition=0 00:07:33 FLIGetStepsRemaining err=0 RemainingSteps=0 00:07:33 Filter is already there-color wheel unchanged 00:07:33 Received message from Master: op=Shutter serial=124315 00:07:33 Shutter LASER close 00:07:33 Received message from Camera: op=State serial=124317 00:07:33 GetSingleValue result=40 Value=cccccccc 00:07:33 SkyScan query 00:07:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:07:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:33 Parameters OK 00:07:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:33 Set A/D data flow result=40 00:07:33 Set A/D channel type result=40 00:07:33 Set A/D encoding result=40 00:07:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:33 Set channel filter=0.000000e+000 result=40 00:07:33 Config A/D Result=40 00:07:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:33 Get A/D filter: -9.255963e+061 result=40 00:07:33 Get A/D value=-858993460 result=40 00:07:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:33 Parameters OK 00:07:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:33 Set A/D data flow result=40 00:07:33 Set A/D channel type result=40 00:07:33 Set A/D encoding result=40 00:07:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:33 Set channel filter=0.000000e+000 result=40 00:07:33 Config A/D Result=40 00:07:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:33 Get A/D filter: -9.255963e+061 result=40 00:07:33 Get A/D value=-858993460 result=40 00:07:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:07:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:07:33 Aux= 00:07:33 Message to Camera, serial 124317 queued 00:08:10 Received message from Master: op=PointingHead serial=124330 00:08:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:08:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:08:11 Point started: ret=0 00:08:11 point_skyscan result=0 00:08:11 Check angles 00:08:11 SkyScan query 00:08:12 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.06<-17404 Statuses=0009 0009 00:08:12 Msec=0 True Az=108.81 Ze=-81.06 Az status=0009 Ze status=0009 00:08:12 Check angles 00:08:12 SkyScan query 00:08:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 00:08:13 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 00:08:13 Check angles 00:08:13 SkyScan query 00:08:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 00:08:13 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 00:08:14 Check angles 00:08:14 SkyScan query 00:08:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 00:08:14 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 00:08:14 Check angles 00:08:14 SkyScan query 00:08:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.72<-23048 Statuses=0008 0009 00:08:15 Msec=3000 True Az=112.995 Ze=-165.72 Az status=0008 Ze status=0009 00:08:15 Check angles 00:08:15 SkyScan query 00:08:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:08:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:08:16 Message to Master queued w/err=0: serial=124330 error=0 00:08:21 Received message from Master: op=Filter serial=124331 00:08:21 Color wheel filter change from 0 to 0 00:08:21 FLIGetFilterPos err=0 currentPosition=0 00:08:21 FLIGetStepsRemaining err=0 RemainingSteps=0 00:08:21 Filter is already there-color wheel unchanged 00:08:21 Received message from Master: op=Shutter serial=124332 00:08:21 Shutter LASER open 00:08:21 Received message from Camera: op=State serial=124334 00:08:21 GetSingleValue result=40 Value=cccccccc 00:08:21 SkyScan query 00:08:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:08:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:22 Parameters OK 00:08:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:22 Set A/D data flow result=40 00:08:22 Set A/D channel type result=40 00:08:22 Set A/D encoding result=40 00:08:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:22 Set channel filter=0.000000e+000 result=40 00:08:22 Config A/D Result=40 00:08:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:22 Get A/D filter: -9.255963e+061 result=40 00:08:22 Get A/D value=-858993460 result=40 00:08:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:22 Parameters OK 00:08:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:22 Set A/D data flow result=40 00:08:22 Set A/D channel type result=40 00:08:22 Set A/D encoding result=40 00:08:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:22 Set channel filter=0.000000e+000 result=40 00:08:22 Config A/D Result=40 00:08:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:22 Get A/D filter: -9.255963e+061 result=40 00:08:22 Get A/D value=-858993460 result=40 00:08:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:08:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:08:22 Aux= 00:08:22 Message to Camera, serial 124334 queued 00:08:30 Received message from Master: op=Shutter serial=124344 00:08:30 Shutter LASER close 00:08:31 Received message from Master: op=PointingHead serial=124348 00:08:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:08:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:08:31 Point started: ret=0 00:08:31 point_skyscan result=0 00:08:32 Check angles 00:08:32 SkyScan query 00:08:32 SkyScan query done: ret=0 az=90.165<-6011 ze=157.56<-1496 Statuses=0009 0009 00:08:32 Msec=0 True Az=90.165 Ze=157.56 Az status=0009 Ze status=0009 00:08:32 Check angles 00:08:32 SkyScan query 00:08:33 SkyScan query done: ret=0 az=72.69<-4846 ze=136.545<-2897 Statuses=0009 0009 00:08:33 Msec=750 True Az=72.69 Ze=136.545 Az status=0009 Ze status=0009 00:08:33 Check angles 00:08:33 SkyScan query 00:08:34 SkyScan query done: ret=0 az=55.35<-3690 ze=115.65<-4290 Statuses=0009 0009 00:08:34 Msec=1500 True Az=55.35 Ze=115.65 Az status=0009 Ze status=0009 00:08:34 Check angles 00:08:34 SkyScan query 00:08:34 SkyScan query done: ret=0 az=40.995<-2733 ze=94.665<-5689 Statuses=0009 0009 00:08:34 Msec=2250 True Az=40.995 Ze=94.665 Az status=0009 Ze status=0009 00:08:35 Check angles 00:08:35 SkyScan query 00:08:35 SkyScan query done: ret=0 az=40.995<-2733 ze=73.335<-7111 Statuses=0008 0009 00:08:35 Msec=3000 True Az=40.995 Ze=73.335 Az status=0008 Ze status=0009 00:08:35 Check angles 00:08:35 SkyScan query 00:08:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 00:08:36 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 00:08:36 Check angles 00:08:36 SkyScan query 00:08:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:08:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:08:37 Message to Master queued w/err=0: serial=124348 error=0 00:08:42 Received message from Master: op=Filter serial=124349 00:08:42 Color wheel filter change from 0 to 0 00:08:42 FLIGetFilterPos err=0 currentPosition=0 00:08:42 FLIGetStepsRemaining err=0 RemainingSteps=0 00:08:42 Filter is already there-color wheel unchanged 00:08:42 Received message from Master: op=Shutter serial=124350 00:08:42 Shutter LASER close 00:08:42 Received message from Camera: op=State serial=124352 00:08:42 GetSingleValue result=40 Value=cccccccc 00:08:42 SkyScan query 00:08:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:08:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:43 Parameters OK 00:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:43 Set A/D data flow result=40 00:08:43 Set A/D channel type result=40 00:08:43 Set A/D encoding result=40 00:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:43 Set channel filter=0.000000e+000 result=40 00:08:43 Config A/D Result=40 00:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:43 Get A/D filter: -9.255963e+061 result=40 00:08:43 Get A/D value=-858993460 result=40 00:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:43 Parameters OK 00:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:43 Set A/D data flow result=40 00:08:43 Set A/D channel type result=40 00:08:43 Set A/D encoding result=40 00:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:43 Set channel filter=0.000000e+000 result=40 00:08:43 Config A/D Result=40 00:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:43 Get A/D filter: -9.255963e+061 result=40 00:08:43 Get A/D value=-858993460 result=40 00:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:08:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:08:43 Aux= 00:08:43 Message to Camera, serial 124352 queued 00:09:20 Received message from Master: op=PointingHead serial=124365 00:09:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:09:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:09:20 Point started: ret=0 00:09:20 point_skyscan result=0 00:09:21 Check angles 00:09:21 SkyScan query 00:09:21 SkyScan query done: ret=0 az=40.995<-2733 ze=21.315<-10579 Statuses=0008 0009 00:09:21 Msec=0 True Az=40.995 Ze=21.315 Az status=0008 Ze status=0009 00:09:21 Check angles 00:09:21 SkyScan query 00:09:22 SkyScan query done: ret=0 az=40.995<-2733 ze=0.375<-11975 Statuses=0008 0009 00:09:22 Msec=750 True Az=40.995 Ze=0.375 Az status=0008 Ze status=0009 00:09:22 Check angles 00:09:22 SkyScan query 00:09:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.595<-13373 Statuses=0008 0009 00:09:23 Msec=1500 True Az=40.995 Ze=-20.595 Az status=0008 Ze status=0009 00:09:23 Check angles 00:09:23 SkyScan query 00:09:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:09:24 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:09:24 Check angles 00:09:24 SkyScan query 00:09:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:09:24 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:09:24 Message to Master queued w/err=0: serial=124365 error=0 00:09:29 Received message from Master: op=Filter serial=124366 00:09:29 Color wheel filter change from 0 to 0 00:09:29 FLIGetFilterPos err=0 currentPosition=0 00:09:29 FLIGetStepsRemaining err=0 RemainingSteps=0 00:09:29 Filter is already there-color wheel unchanged 00:09:29 Received message from Master: op=Shutter serial=124367 00:09:29 Shutter LASER close 00:09:29 Received message from Camera: op=State serial=124369 00:09:29 GetSingleValue result=40 Value=cccccccc 00:09:29 SkyScan query 00:09:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:09:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:30 Parameters OK 00:09:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:30 Set A/D data flow result=40 00:09:30 Set A/D channel type result=40 00:09:30 Set A/D encoding result=40 00:09:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:30 Set channel filter=0.000000e+000 result=40 00:09:30 Config A/D Result=40 00:09:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:30 Get A/D filter: -9.255963e+061 result=40 00:09:30 Get A/D value=-858993460 result=40 00:09:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:30 Parameters OK 00:09:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:30 Set A/D data flow result=40 00:09:30 Set A/D channel type result=40 00:09:30 Set A/D encoding result=40 00:09:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:30 Set channel filter=0.000000e+000 result=40 00:09:30 Config A/D Result=40 00:09:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:30 Get A/D filter: -9.255963e+061 result=40 00:09:30 Get A/D value=-858993460 result=40 00:09:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:09:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:09:30 Aux= 00:09:30 Message to Camera, serial 124369 queued 00:10:07 Received message from Master: op=PointingHead serial=124382 00:10:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:10:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:10:07 Point started: ret=0 00:10:07 point_skyscan result=0 00:10:08 Check angles 00:10:08 SkyScan query 00:10:09 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.115<-16541 Statuses=0009 0009 00:10:09 Msec=0 True Az=63.945 Ze=-68.115 Az status=0009 Ze status=0009 00:10:09 Check angles 00:10:09 SkyScan query 00:10:09 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.625<-17975 Statuses=0009 0009 00:10:09 Msec=750 True Az=81.78 Ze=-89.625 Az status=0009 Ze status=0009 00:10:10 Check angles 00:10:10 SkyScan query 00:10:10 SkyScan query done: ret=0 az=99.66<-6644 ze=-110.925<-19395 Statuses=0009 0009 00:10:10 Msec=1500 True Az=99.66 Ze=-110.925 Az status=0009 Ze status=0009 00:10:10 Check angles 00:10:10 SkyScan query 00:10:11 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.85<-20790 Statuses=0009 0009 00:10:11 Msec=2250 True Az=117.105 Ze=-131.85 Az status=0009 Ze status=0009 00:10:11 Check angles 00:10:11 SkyScan query 00:10:12 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 00:10:12 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 00:10:12 Check angles 00:10:12 SkyScan query 00:10:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 00:10:12 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 00:10:12 Message to Master queued w/err=0: serial=124382 error=0 00:10:17 Received message from Master: op=Filter serial=124383 00:10:17 Color wheel filter change from 0 to 0 00:10:17 FLIGetFilterPos err=0 currentPosition=0 00:10:17 FLIGetStepsRemaining err=0 RemainingSteps=0 00:10:17 Filter is already there-color wheel unchanged 00:10:18 Received message from Master: op=Shutter serial=124384 00:10:18 Shutter LASER close 00:10:18 Received message from Camera: op=State serial=124386 00:10:18 GetSingleValue result=40 Value=cccccccc 00:10:18 SkyScan query 00:10:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:10:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:18 Parameters OK 00:10:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:18 Set A/D data flow result=40 00:10:18 Set A/D channel type result=40 00:10:18 Set A/D encoding result=40 00:10:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:18 Set channel filter=0.000000e+000 result=40 00:10:18 Config A/D Result=40 00:10:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:18 Get A/D filter: -9.255963e+061 result=40 00:10:18 Get A/D value=-858993460 result=40 00:10:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:18 Parameters OK 00:10:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:18 Set A/D data flow result=40 00:10:18 Set A/D channel type result=40 00:10:18 Set A/D encoding result=40 00:10:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:18 Set channel filter=0.000000e+000 result=40 00:10:18 Config A/D Result=40 00:10:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:18 Get A/D filter: -9.255963e+061 result=40 00:10:18 Get A/D value=-858993460 result=40 00:10:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:10:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:10:18 Aux= 00:10:18 Message to Camera, serial 124386 queued 00:10:55 Received message from Master: op=PointingHead serial=124399 00:10:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:10:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:10:55 Point started: ret=0 00:10:55 point_skyscan result=0 00:10:56 Check angles 00:10:56 SkyScan query 00:10:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 00:10:57 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 00:10:57 Check angles 00:10:57 SkyScan query 00:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:10:57 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:10:57 Message to Master queued w/err=0: serial=124399 error=0 00:11:02 Received message from Master: op=Filter serial=124400 00:11:02 Color wheel filter change from 0 to 0 00:11:02 FLIGetFilterPos err=0 currentPosition=0 00:11:02 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:02 Filter is already there-color wheel unchanged 00:11:03 Received message from Master: op=Shutter serial=124401 00:11:03 Shutter LASER open 00:11:03 Received message from Camera: op=State serial=124403 00:11:03 GetSingleValue result=40 Value=cccccccc 00:11:03 SkyScan query 00:11:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:11:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:03 Parameters OK 00:11:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:03 Set A/D data flow result=40 00:11:03 Set A/D channel type result=40 00:11:03 Set A/D encoding result=40 00:11:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:03 Set channel filter=0.000000e+000 result=40 00:11:03 Config A/D Result=40 00:11:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:03 Get A/D filter: -9.255963e+061 result=40 00:11:03 Get A/D value=-858993460 result=40 00:11:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:03 Parameters OK 00:11:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:03 Set A/D data flow result=40 00:11:03 Set A/D channel type result=40 00:11:03 Set A/D encoding result=40 00:11:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:03 Set channel filter=0.000000e+000 result=40 00:11:03 Config A/D Result=40 00:11:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:03 Get A/D filter: -9.255963e+061 result=40 00:11:03 Get A/D value=-858993460 result=40 00:11:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:03 Aux= 00:11:03 Message to Camera, serial 124403 queued 00:11:11 Received message from Master: op=Shutter serial=124412 00:11:11 Shutter LASER close 00:11:11 Received message from Master: op=PointingHead serial=124416 00:11:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:11:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:11:12 Point started: ret=0 00:11:12 point_skyscan result=0 00:11:12 Check angles 00:11:12 SkyScan query 00:11:13 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.235<-21549 Statuses=0009 0009 00:11:13 Msec=0 True Az=135.96 Ze=-143.235 Az status=0009 Ze status=0009 00:11:13 Check angles 00:11:13 SkyScan query 00:11:14 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.815<-20121 Statuses=0009 0009 00:11:14 Msec=750 True Az=153.825 Ze=-121.815 Az status=0009 Ze status=0009 00:11:14 Check angles 00:11:14 SkyScan query 00:11:15 SkyScan query done: ret=0 az=171.3<-11420 ze=-100.89<-18726 Statuses=0009 0009 00:11:15 Msec=1500 True Az=171.3 Ze=-100.89 Az status=0009 Ze status=0009 00:11:15 Check angles 00:11:15 SkyScan query 00:11:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.5<-17300 Statuses=0008 0009 00:11:15 Msec=2250 True Az=176.01 Ze=-79.5 Az status=0008 Ze status=0009 00:11:16 Check angles 00:11:16 SkyScan query 00:11:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.485<-15899 Statuses=0008 0009 00:11:16 Msec=3000 True Az=176.01 Ze=-58.485 Az status=0008 Ze status=0009 00:11:16 Check angles 00:11:16 SkyScan query 00:11:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:11:17 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:11:17 Message to Master queued w/err=0: serial=124416 error=0 00:11:22 Received message from Master: op=Filter serial=124417 00:11:22 Color wheel filter change from 0 to 0 00:11:22 FLIGetFilterPos err=0 currentPosition=0 00:11:22 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:22 Filter is already there-color wheel unchanged 00:11:22 Received message from Master: op=Shutter serial=124418 00:11:22 Shutter LASER close 00:11:22 Received message from Camera: op=State serial=124420 00:11:22 GetSingleValue result=40 Value=cccccccc 00:11:22 SkyScan query 00:11:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:11:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:23 Parameters OK 00:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:23 Set A/D data flow result=40 00:11:23 Set A/D channel type result=40 00:11:23 Set A/D encoding result=40 00:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:23 Set channel filter=0.000000e+000 result=40 00:11:23 Config A/D Result=40 00:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:23 Get A/D filter: -9.255963e+061 result=40 00:11:23 Get A/D value=-858993460 result=40 00:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:23 Parameters OK 00:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:23 Set A/D data flow result=40 00:11:23 Set A/D channel type result=40 00:11:23 Set A/D encoding result=40 00:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:23 Set channel filter=0.000000e+000 result=40 00:11:23 Config A/D Result=40 00:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:23 Get A/D filter: -9.255963e+061 result=40 00:11:23 Get A/D value=-858993460 result=40 00:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:23 Aux= 00:11:23 Message to Camera, serial 124420 queued 00:11:59 Received message from Master: op=PointingHead serial=124432 00:11:59 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:11:59 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:11:59 Point started: ret=0 00:11:59 point_skyscan result=0 00:12:00 Check angles 00:12:00 SkyScan query 00:12:00 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.69<-13446 Statuses=0009 0009 00:12:00 Msec=0 True Az=152.91 Ze=-21.69 Az status=0009 Ze status=0009 00:12:01 Check angles 00:12:01 SkyScan query 00:12:01 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.675<-12045 Statuses=0009 0009 00:12:01 Msec=750 True Az=135.39 Ze=-0.675 Az status=0009 Ze status=0009 00:12:01 Check angles 00:12:01 SkyScan query 00:12:02 SkyScan query done: ret=0 az=117.96<-7864 ze=20.22<-10652 Statuses=0009 0009 00:12:02 Msec=1500 True Az=117.96 Ze=20.22 Az status=0009 Ze status=0009 00:12:02 Check angles 00:12:02 SkyScan query 00:12:03 SkyScan query done: ret=0 az=100.44<-6696 ze=41.22<-9252 Statuses=0009 0009 00:12:03 Msec=2250 True Az=100.44 Ze=41.22 Az status=0009 Ze status=0009 00:12:03 Check angles 00:12:03 SkyScan query 00:12:03 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 00:12:03 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 00:12:04 Check angles 00:12:04 SkyScan query 00:12:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 00:12:04 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 00:12:04 Message to Master queued w/err=0: serial=124432 error=0 00:12:09 Received message from Master: op=Filter serial=124433 00:12:09 Color wheel filter change from 0 to 0 00:12:09 FLIGetFilterPos err=0 currentPosition=0 00:12:09 FLIGetStepsRemaining err=0 RemainingSteps=0 00:12:09 Filter is already there-color wheel unchanged 00:12:09 Received message from Master: op=Shutter serial=124434 00:12:09 Shutter LASER close 00:12:09 Received message from Camera: op=State serial=124436 00:12:09 GetSingleValue result=40 Value=cccccccc 00:12:09 SkyScan query 00:12:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:12:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:10 Parameters OK 00:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:10 Set A/D data flow result=40 00:12:10 Set A/D channel type result=40 00:12:10 Set A/D encoding result=40 00:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:10 Set channel filter=0.000000e+000 result=40 00:12:10 Config A/D Result=40 00:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:10 Get A/D filter: -9.255963e+061 result=40 00:12:10 Get A/D value=-858993460 result=40 00:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:10 Parameters OK 00:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:10 Set A/D data flow result=40 00:12:10 Set A/D channel type result=40 00:12:10 Set A/D encoding result=40 00:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:10 Set channel filter=0.000000e+000 result=40 00:12:10 Config A/D Result=40 00:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:10 Get A/D filter: -9.255963e+061 result=40 00:12:10 Get A/D value=-858993460 result=40 00:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:12:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:12:10 Aux= 00:12:10 Message to Camera, serial 124436 queued 00:12:47 Received message from Master: op=PointingHead serial=124449 00:12:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:12:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:12:47 Point started: ret=0 00:12:47 point_skyscan result=0 00:12:48 Check angles 00:12:48 SkyScan query 00:12:48 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 00:12:48 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 00:12:49 Check angles 00:12:49 SkyScan query 00:12:49 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 00:12:49 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 00:12:49 Check angles 00:12:49 SkyScan query 00:12:50 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 00:12:50 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 00:12:50 Check angles 00:12:50 SkyScan query 00:12:51 SkyScan query done: ret=0 az=162.36<-10824 ze=38.505<-9433 Statuses=0009 0008 00:12:51 Msec=2250 True Az=162.36 Ze=38.505 Az status=0009 Ze status=0008 00:12:51 Check angles 00:12:51 SkyScan query 00:12:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 00:12:51 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 00:12:52 Check angles 00:12:52 SkyScan query 00:12:52 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:12:52 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:12:52 Message to Master queued w/err=0: serial=124449 error=0 00:12:57 Received message from Master: op=Filter serial=124450 00:12:57 Color wheel filter change from 0 to 0 00:12:57 FLIGetFilterPos err=0 currentPosition=0 00:12:57 FLIGetStepsRemaining err=0 RemainingSteps=0 00:12:57 Filter is already there-color wheel unchanged 00:12:57 Received message from Master: op=Shutter serial=124451 00:12:57 Shutter LASER close 00:12:57 Received message from Camera: op=State serial=124453 00:12:57 GetSingleValue result=40 Value=cccccccc 00:12:57 SkyScan query 00:12:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:12:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:58 Parameters OK 00:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:58 Set A/D data flow result=40 00:12:58 Set A/D channel type result=40 00:12:58 Set A/D encoding result=40 00:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:58 Set channel filter=0.000000e+000 result=40 00:12:58 Config A/D Result=40 00:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:58 Get A/D filter: -9.255963e+061 result=40 00:12:58 Get A/D value=-858993460 result=40 00:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:58 Parameters OK 00:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:58 Set A/D data flow result=40 00:12:58 Set A/D channel type result=40 00:12:58 Set A/D encoding result=40 00:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:58 Set channel filter=0.000000e+000 result=40 00:12:58 Config A/D Result=40 00:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:58 Get A/D filter: -9.255963e+061 result=40 00:12:58 Get A/D value=-858993460 result=40 00:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:12:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:12:58 Aux= 00:12:58 Message to Camera, serial 124453 queued 00:13:35 Received message from Master: op=PointingHead serial=124466 00:13:35 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:13:35 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:13:35 Point started: ret=0 00:13:35 point_skyscan result=0 00:13:36 Check angles 00:13:36 SkyScan query 00:13:37 SkyScan query done: ret=0 az=153.09<-10206 ze=8.775<-11415 Statuses=0009 0009 00:13:37 Msec=0 True Az=153.09 Ze=8.775 Az status=0009 Ze status=0009 00:13:37 Check angles 00:13:37 SkyScan query 00:13:37 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.15<-12810 Statuses=0009 0009 00:13:37 Msec=750 True Az=135.705 Ze=-12.15 Az status=0009 Ze status=0009 00:13:37 Check angles 00:13:37 SkyScan query 00:13:38 SkyScan query done: ret=0 az=118.125<-7875 ze=-33.09<-14206 Statuses=0009 0009 00:13:38 Msec=1500 True Az=118.125 Ze=-33.09 Az status=0009 Ze status=0009 00:13:38 Check angles 00:13:38 SkyScan query 00:13:39 SkyScan query done: ret=0 az=100.725<-6715 ze=-51.51<-15434 Statuses=0009 0009 00:13:39 Msec=2250 True Az=100.725 Ze=-51.51 Az status=0009 Ze status=0009 00:13:39 Check angles 00:13:39 SkyScan query 00:13:40 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 00:13:40 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 00:13:40 Check angles 00:13:40 SkyScan query 00:13:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:13:40 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:13:40 Message to Master queued w/err=0: serial=124466 error=0 00:13:45 Received message from Master: op=Filter serial=124467 00:13:45 Color wheel filter change from 0 to 0 00:13:45 FLIGetFilterPos err=0 currentPosition=0 00:13:45 FLIGetStepsRemaining err=0 RemainingSteps=0 00:13:45 Filter is already there-color wheel unchanged 00:13:45 Received message from Master: op=Shutter serial=124468 00:13:45 Shutter LASER close 00:13:45 Received message from Camera: op=State serial=124470 00:13:45 GetSingleValue result=40 Value=cccccccc 00:13:45 SkyScan query 00:13:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:13:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:46 Parameters OK 00:13:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:46 Set A/D data flow result=40 00:13:46 Set A/D channel type result=40 00:13:46 Set A/D encoding result=40 00:13:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:46 Set channel filter=0.000000e+000 result=40 00:13:46 Config A/D Result=40 00:13:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:46 Get A/D filter: -9.255963e+061 result=40 00:13:46 Get A/D value=-858993460 result=40 00:13:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:46 Parameters OK 00:13:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:46 Set A/D data flow result=40 00:13:46 Set A/D channel type result=40 00:13:46 Set A/D encoding result=40 00:13:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:46 Set channel filter=0.000000e+000 result=40 00:13:46 Config A/D Result=40 00:13:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:46 Get A/D filter: -9.255963e+061 result=40 00:13:46 Get A/D value=-858993460 result=40 00:13:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:13:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:13:46 Aux= 00:13:46 Message to Camera, serial 124470 queued 00:14:23 Received message from Master: op=PointingHead serial=124483 00:14:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:14:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:14:23 Point started: ret=0 00:14:23 point_skyscan result=0 00:14:24 Check angles 00:14:24 SkyScan query 00:14:25 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.48<-17432 Statuses=0009 0009 00:14:25 Msec=0 True Az=109.335 Ze=-81.48 Az status=0009 Ze status=0009 00:14:25 Check angles 00:14:25 SkyScan query 00:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 00:14:25 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 00:14:25 Check angles 00:14:25 SkyScan query 00:14:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 00:14:26 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 00:14:26 Check angles 00:14:26 SkyScan query 00:14:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.215<-21681 Statuses=0008 0009 00:14:27 Msec=2250 True Az=112.995 Ze=-145.215 Az status=0008 Ze status=0009 00:14:27 Check angles 00:14:27 SkyScan query 00:14:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.62<-23108 Statuses=0008 0009 00:14:28 Msec=3000 True Az=112.995 Ze=-166.62 Az status=0008 Ze status=0009 00:14:28 Check angles 00:14:28 SkyScan query 00:14:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:14:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:14:28 Message to Master queued w/err=0: serial=124483 error=0 00:14:33 Received message from Master: op=Filter serial=124484 00:14:33 Color wheel filter change from 0 to 0 00:14:33 FLIGetFilterPos err=0 currentPosition=0 00:14:33 FLIGetStepsRemaining err=0 RemainingSteps=0 00:14:33 Filter is already there-color wheel unchanged 00:14:34 Received message from Master: op=Shutter serial=124485 00:14:34 Shutter LASER open 00:14:34 Received message from Camera: op=State serial=124487 00:14:34 GetSingleValue result=40 Value=cccccccc 00:14:34 SkyScan query 00:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:14:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:34 Parameters OK 00:14:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:34 Set A/D data flow result=40 00:14:34 Set A/D channel type result=40 00:14:34 Set A/D encoding result=40 00:14:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:34 Set channel filter=0.000000e+000 result=40 00:14:34 Config A/D Result=40 00:14:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:34 Get A/D filter: -9.255963e+061 result=40 00:14:34 Get A/D value=-858993460 result=40 00:14:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:34 Parameters OK 00:14:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:34 Set A/D data flow result=40 00:14:34 Set A/D channel type result=40 00:14:34 Set A/D encoding result=40 00:14:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:34 Set channel filter=0.000000e+000 result=40 00:14:34 Config A/D Result=40 00:14:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:34 Get A/D filter: -9.255963e+061 result=40 00:14:34 Get A/D value=-858993460 result=40 00:14:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:14:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:14:34 Aux= 00:14:34 Message to Camera, serial 124487 queued 00:14:43 Received message from Master: op=Shutter serial=124497 00:14:43 Shutter LASER close 00:14:43 Received message from Master: op=PointingHead serial=124501 00:14:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:14:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:14:43 Point started: ret=0 00:14:43 point_skyscan result=0 00:14:44 Check angles 00:14:44 SkyScan query 00:14:45 SkyScan query done: ret=0 az=89.85<-5990 ze=157.32<-1512 Statuses=0009 0009 00:14:45 Msec=0 True Az=89.85 Ze=157.32 Az status=0009 Ze status=0009 00:14:45 Check angles 00:14:45 SkyScan query 00:14:46 SkyScan query done: ret=0 az=72.495<-4833 ze=136.32<-2912 Statuses=0009 0009 00:14:46 Msec=750 True Az=72.495 Ze=136.32 Az status=0009 Ze status=0009 00:14:46 Check angles 00:14:46 SkyScan query 00:14:46 SkyScan query done: ret=0 az=55.095<-3673 ze=115.395<-4307 Statuses=0009 0009 00:14:46 Msec=1500 True Az=55.095 Ze=115.395 Az status=0009 Ze status=0009 00:14:46 Check angles 00:14:46 SkyScan query 00:14:47 SkyScan query done: ret=0 az=41.01<-2734 ze=93.96<-5736 Statuses=0009 0009 00:14:47 Msec=2250 True Az=41.01 Ze=93.96 Az status=0009 Ze status=0009 00:14:47 Check angles 00:14:47 SkyScan query 00:14:48 SkyScan query done: ret=0 az=40.995<-2733 ze=73.02<-7132 Statuses=0008 0009 00:14:48 Msec=3000 True Az=40.995 Ze=73.02 Az status=0008 Ze status=0009 00:14:48 Check angles 00:14:48 SkyScan query 00:14:49 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 00:14:49 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 00:14:49 Check angles 00:14:49 SkyScan query 00:14:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:14:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:14:49 Message to Master queued w/err=0: serial=124501 error=0 00:14:54 Received message from Master: op=Filter serial=124502 00:14:54 Color wheel filter change from 0 to 0 00:14:54 FLIGetFilterPos err=0 currentPosition=0 00:14:54 FLIGetStepsRemaining err=0 RemainingSteps=0 00:14:54 Filter is already there-color wheel unchanged 00:14:55 Received message from Master: op=Shutter serial=124503 00:14:55 Shutter LASER close 00:14:55 Received message from Camera: op=State serial=124505 00:14:55 GetSingleValue result=40 Value=cccccccc 00:14:55 SkyScan query 00:14:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:14:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:55 Parameters OK 00:14:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:55 Set A/D data flow result=40 00:14:55 Set A/D channel type result=40 00:14:55 Set A/D encoding result=40 00:14:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:55 Set channel filter=0.000000e+000 result=40 00:14:55 Config A/D Result=40 00:14:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:55 Get A/D filter: -9.255963e+061 result=40 00:14:55 Get A/D value=-858993460 result=40 00:14:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:55 Parameters OK 00:14:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:55 Set A/D data flow result=40 00:14:55 Set A/D channel type result=40 00:14:55 Set A/D encoding result=40 00:14:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:55 Set channel filter=0.000000e+000 result=40 00:14:55 Config A/D Result=40 00:14:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:55 Get A/D filter: -9.255963e+061 result=40 00:14:55 Get A/D value=-858993460 result=40 00:14:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:14:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:14:55 Aux= 00:14:55 Message to Camera, serial 124505 queued 00:15:27 Received message from Master: op=Identify serial=124510 00:15:32 Received message from Master: op=PointingHead serial=124521 00:15:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:15:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:15:33 Point started: ret=0 00:15:33 point_skyscan result=0 00:15:33 Check angles 00:15:33 SkyScan query 00:15:34 SkyScan query done: ret=0 az=40.98<-2732 ze=21.345<-10577 Statuses=0008 0009 00:15:34 Msec=0 True Az=40.98 Ze=21.345 Az status=0008 Ze status=0009 00:15:34 Check angles 00:15:34 SkyScan query 00:15:35 SkyScan query done: ret=0 az=40.995<-2733 ze=0.405<-11973 Statuses=0008 0009 00:15:35 Msec=750 True Az=40.995 Ze=0.405 Az status=0008 Ze status=0009 00:15:35 Check angles 00:15:35 SkyScan query 00:15:35 SkyScan query done: ret=0 az=40.98<-2732 ze=-20.55<-13370 Statuses=0008 0009 00:15:35 Msec=1500 True Az=40.98 Ze=-20.55 Az status=0008 Ze status=0009 00:15:36 Check angles 00:15:36 SkyScan query 00:15:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 00:15:36 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 00:15:36 Check angles 00:15:36 SkyScan query 00:15:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:15:37 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:15:37 Message to Master queued w/err=0: serial=124521 error=0 00:15:42 Received message from Master: op=Filter serial=124522 00:15:42 Color wheel filter change from 0 to 0 00:15:42 FLIGetFilterPos err=0 currentPosition=0 00:15:42 FLIGetStepsRemaining err=0 RemainingSteps=0 00:15:42 Filter is already there-color wheel unchanged 00:15:42 Received message from Master: op=Shutter serial=124523 00:15:42 Shutter LASER close 00:15:42 Received message from Camera: op=State serial=124525 00:15:42 GetSingleValue result=40 Value=cccccccc 00:15:42 SkyScan query 00:15:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:15:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:43 Parameters OK 00:15:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:43 Set A/D data flow result=40 00:15:43 Set A/D channel type result=40 00:15:43 Set A/D encoding result=40 00:15:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:43 Set channel filter=0.000000e+000 result=40 00:15:43 Config A/D Result=40 00:15:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:43 Get A/D filter: -9.255963e+061 result=40 00:15:43 Get A/D value=-858993460 result=40 00:15:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:43 Parameters OK 00:15:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:43 Set A/D data flow result=40 00:15:43 Set A/D channel type result=40 00:15:43 Set A/D encoding result=40 00:15:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:43 Set channel filter=0.000000e+000 result=40 00:15:43 Config A/D Result=40 00:15:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:43 Get A/D filter: -9.255963e+061 result=40 00:15:43 Get A/D value=-858993460 result=40 00:15:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:15:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:15:43 Aux= 00:15:43 Message to Camera, serial 124525 queued [UTC 2018-12-14 00:15:52] 00:16:20 Received message from Master: op=PointingHead serial=124538 00:16:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:16:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:16:20 Point started: ret=0 00:16:20 point_skyscan result=0 00:16:21 Check angles 00:16:21 SkyScan query 00:16:21 SkyScan query done: ret=0 az=63.705<-4247 ze=-68.04<-16536 Statuses=0009 0009 00:16:21 Msec=0 True Az=63.705 Ze=-68.04 Az status=0009 Ze status=0009 00:16:21 Check angles 00:16:21 SkyScan query 00:16:22 SkyScan query done: ret=0 az=81.195<-5413 ze=-88.98<-17932 Statuses=0009 0009 00:16:22 Msec=750 True Az=81.195 Ze=-88.98 Az status=0009 Ze status=0009 00:16:22 Check angles 00:16:22 SkyScan query 00:16:23 SkyScan query done: ret=0 az=98.64<-6576 ze=-109.905<-19327 Statuses=0009 0009 00:16:23 Msec=1500 True Az=98.64 Ze=-109.905 Az status=0009 Ze status=0009 00:16:23 Check angles 00:16:23 SkyScan query 00:16:24 SkyScan query done: ret=0 az=116.13<-7742 ze=-130.875<-20725 Statuses=0009 0009 00:16:24 Msec=2250 True Az=116.13 Ze=-130.875 Az status=0009 Ze status=0009 00:16:24 Check angles 00:16:24 SkyScan query 00:16:24 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 00:16:24 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 00:16:24 Check angles 00:16:24 SkyScan query 00:16:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:16:25 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:16:25 Message to Master queued w/err=0: serial=124538 error=0 00:16:30 Received message from Master: op=Filter serial=124539 00:16:30 Color wheel filter change from 0 to 0 00:16:30 FLIGetFilterPos err=0 currentPosition=0 00:16:30 FLIGetStepsRemaining err=0 RemainingSteps=0 00:16:30 Filter is already there-color wheel unchanged 00:16:30 Received message from Master: op=Shutter serial=124540 00:16:30 Shutter LASER close 00:16:30 Received message from Camera: op=State serial=124542 00:16:30 GetSingleValue result=40 Value=cccccccc 00:16:30 SkyScan query 00:16:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:16:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:16:31 Parameters OK 00:16:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:16:31 Set A/D data flow result=40 00:16:31 Set A/D channel type result=40 00:16:31 Set A/D encoding result=40 00:16:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:16:31 Set channel filter=0.000000e+000 result=40 00:16:31 Config A/D Result=40 00:16:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:16:31 Get A/D filter: -9.255963e+061 result=40 00:16:31 Get A/D value=-858993460 result=40 00:16:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:16:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:16:31 Parameters OK 00:16:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:16:31 Set A/D data flow result=40 00:16:31 Set A/D channel type result=40 00:16:31 Set A/D encoding result=40 00:16:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:16:31 Set channel filter=0.000000e+000 result=40 00:16:31 Config A/D Result=40 00:16:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:16:31 Get A/D filter: -9.255963e+061 result=40 00:16:31 Get A/D value=-858993460 result=40 00:16:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:16:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:16:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:16:31 Aux= 00:16:31 Message to Camera, serial 124542 queued 00:17:08 Received message from Master: op=PointingHead serial=124555 00:17:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:17:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:17:08 Point started: ret=0 00:17:08 point_skyscan result=0 00:17:09 Check angles 00:17:09 SkyScan query 00:17:09 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 00:17:09 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 00:17:09 Check angles 00:17:09 SkyScan query 00:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:17:10 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:17:10 Message to Master queued w/err=0: serial=124555 error=0 00:17:15 Received message from Master: op=Filter serial=124556 00:17:15 Color wheel filter change from 0 to 0 00:17:15 FLIGetFilterPos err=0 currentPosition=0 00:17:15 FLIGetStepsRemaining err=0 RemainingSteps=0 00:17:15 Filter is already there-color wheel unchanged 00:17:15 Received message from Master: op=Shutter serial=124557 00:17:15 Shutter LASER open 00:17:15 Received message from Camera: op=State serial=124559 00:17:15 GetSingleValue result=40 Value=cccccccc 00:17:15 SkyScan query 00:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:17:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:16 Parameters OK 00:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:16 Set A/D data flow result=40 00:17:16 Set A/D channel type result=40 00:17:16 Set A/D encoding result=40 00:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:16 Set channel filter=0.000000e+000 result=40 00:17:16 Config A/D Result=40 00:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:16 Get A/D filter: -9.255963e+061 result=40 00:17:16 Get A/D value=-858993460 result=40 00:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:16 Parameters OK 00:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:16 Set A/D data flow result=40 00:17:16 Set A/D channel type result=40 00:17:16 Set A/D encoding result=40 00:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:16 Set channel filter=0.000000e+000 result=40 00:17:16 Config A/D Result=40 00:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:16 Get A/D filter: -9.255963e+061 result=40 00:17:16 Get A/D value=-858993460 result=40 00:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:17:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:17:16 Aux= 00:17:16 Message to Camera, serial 124559 queued 00:17:24 Received message from Master: op=Shutter serial=124569 00:17:24 Shutter LASER close 00:17:25 Received message from Master: op=PointingHead serial=124573 00:17:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:17:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:17:25 Point started: ret=0 00:17:25 point_skyscan result=0 00:17:26 Check angles 00:17:26 SkyScan query 00:17:27 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.965<-21531 Statuses=0009 0009 00:17:27 Msec=0 True Az=136.38 Ze=-142.965 Az status=0009 Ze status=0009 00:17:27 Check angles 00:17:27 SkyScan query 00:17:27 SkyScan query done: ret=0 az=154.215<-10281 ze=-121.62<-20108 Statuses=0009 0009 00:17:27 Msec=750 True Az=154.215 Ze=-121.62 Az status=0009 Ze status=0009 00:17:28 Check angles 00:17:28 SkyScan query 00:17:28 SkyScan query done: ret=0 az=171.66<-11444 ze=-100.59<-18706 Statuses=0009 0009 00:17:28 Msec=1500 True Az=171.66 Ze=-100.59 Az status=0009 Ze status=0009 00:17:28 Check angles 00:17:28 SkyScan query 00:17:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.245<-17283 Statuses=0008 0009 00:17:29 Msec=2250 True Az=176.01 Ze=-79.245 Az status=0008 Ze status=0009 00:17:29 Check angles 00:17:29 SkyScan query 00:17:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.26<-15884 Statuses=0008 0009 00:17:30 Msec=3000 True Az=176.01 Ze=-58.26 Az status=0008 Ze status=0009 00:17:30 Check angles 00:17:30 SkyScan query 00:17:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:17:30 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:17:30 Message to Master queued w/err=0: serial=124573 error=0 00:17:35 Received message from Master: op=Filter serial=124574 00:17:35 Color wheel filter change from 0 to 0 00:17:35 FLIGetFilterPos err=0 currentPosition=0 00:17:35 FLIGetStepsRemaining err=0 RemainingSteps=0 00:17:35 Filter is already there-color wheel unchanged 00:17:36 Received message from Master: op=Shutter serial=124575 00:17:36 Shutter LASER close 00:17:36 Received message from Camera: op=State serial=124577 00:17:36 GetSingleValue result=40 Value=cccccccc 00:17:36 SkyScan query 00:17:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:17:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:36 Parameters OK 00:17:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:36 Set A/D data flow result=40 00:17:36 Set A/D channel type result=40 00:17:36 Set A/D encoding result=40 00:17:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:36 Set channel filter=0.000000e+000 result=40 00:17:36 Config A/D Result=40 00:17:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:36 Get A/D filter: -9.255963e+061 result=40 00:17:36 Get A/D value=-858993460 result=40 00:17:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:36 Parameters OK 00:17:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:36 Set A/D data flow result=40 00:17:36 Set A/D channel type result=40 00:17:36 Set A/D encoding result=40 00:17:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:36 Set channel filter=0.000000e+000 result=40 00:17:36 Config A/D Result=40 00:17:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:36 Get A/D filter: -9.255963e+061 result=40 00:17:36 Get A/D value=-858993460 result=40 00:17:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:17:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:17:36 Aux= 00:17:36 Message to Camera, serial 124577 queued 00:18:13 Received message from Master: op=PointingHead serial=124590 00:18:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:18:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:18:14 Point started: ret=0 00:18:14 point_skyscan result=0 00:18:14 Check angles 00:18:14 SkyScan query 00:18:15 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.84<-13456 Statuses=0009 0009 00:18:15 Msec=0 True Az=153.09 Ze=-21.84 Az status=0009 Ze status=0009 00:18:15 Check angles 00:18:15 SkyScan query 00:18:16 SkyScan query done: ret=0 az=135.69<-9046 ze=-0.795<-12053 Statuses=0009 0009 00:18:16 Msec=750 True Az=135.69 Ze=-0.795 Az status=0009 Ze status=0009 00:18:16 Check angles 00:18:16 SkyScan query 00:18:16 SkyScan query done: ret=0 az=118.14<-7876 ze=20.205<-10653 Statuses=0009 0009 00:18:16 Msec=1500 True Az=118.14 Ze=20.205 Az status=0009 Ze status=0009 00:18:17 Check angles 00:18:17 SkyScan query 00:18:17 SkyScan query done: ret=0 az=100.68<-6712 ze=41.07<-9262 Statuses=0009 0009 00:18:17 Msec=2250 True Az=100.68 Ze=41.07 Az status=0009 Ze status=0009 00:18:17 Check angles 00:18:17 SkyScan query 00:18:18 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 00:18:18 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 00:18:18 Check angles 00:18:18 SkyScan query 00:18:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:18:19 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:18:19 Message to Master queued w/err=0: serial=124590 error=0 00:18:24 Received message from Master: op=Filter serial=124591 00:18:24 Color wheel filter change from 0 to 0 00:18:24 FLIGetFilterPos err=0 currentPosition=0 00:18:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:18:24 Filter is already there-color wheel unchanged 00:18:24 Received message from Master: op=Shutter serial=124592 00:18:24 Shutter LASER close 00:18:24 Received message from Camera: op=State serial=124594 00:18:24 GetSingleValue result=40 Value=cccccccc 00:18:24 SkyScan query 00:18:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:18:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:24 Parameters OK 00:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:24 Set A/D data flow result=40 00:18:24 Set A/D channel type result=40 00:18:24 Set A/D encoding result=40 00:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:24 Set channel filter=0.000000e+000 result=40 00:18:24 Config A/D Result=40 00:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:24 Get A/D filter: -9.255963e+061 result=40 00:18:24 Get A/D value=-858993460 result=40 00:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:24 Parameters OK 00:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:24 Set A/D data flow result=40 00:18:24 Set A/D channel type result=40 00:18:24 Set A/D encoding result=40 00:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:24 Set channel filter=0.000000e+000 result=40 00:18:24 Config A/D Result=40 00:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:24 Get A/D filter: -9.255963e+061 result=40 00:18:24 Get A/D value=-858993460 result=40 00:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:18:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:18:24 Aux= 00:18:24 Message to Camera, serial 124594 queued 00:19:01 Received message from Master: op=PointingHead serial=124607 00:19:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:19:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:19:02 Point started: ret=0 00:19:02 point_skyscan result=0 00:19:02 Check angles 00:19:02 SkyScan query 00:19:03 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 00:19:03 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 00:19:03 Check angles 00:19:03 SkyScan query 00:19:04 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 00:19:04 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 00:19:04 Check angles 00:19:04 SkyScan query 00:19:04 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 00:19:04 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 00:19:05 Check angles 00:19:05 SkyScan query 00:19:05 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 00:19:05 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 00:19:05 Check angles 00:19:05 SkyScan query 00:19:06 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:19:06 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:19:06 Check angles 00:19:06 SkyScan query 00:19:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:19:07 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:19:07 Message to Master queued w/err=0: serial=124607 error=0 00:19:12 Received message from Master: op=Filter serial=124608 00:19:12 Color wheel filter change from 0 to 0 00:19:12 FLIGetFilterPos err=0 currentPosition=0 00:19:12 FLIGetStepsRemaining err=0 RemainingSteps=0 00:19:12 Filter is already there-color wheel unchanged 00:19:12 Received message from Master: op=Shutter serial=124609 00:19:12 Shutter LASER close 00:19:12 Received message from Camera: op=State serial=124611 00:19:12 GetSingleValue result=40 Value=cccccccc 00:19:12 SkyScan query 00:19:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:19:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:12 Parameters OK 00:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:12 Set A/D data flow result=40 00:19:12 Set A/D channel type result=40 00:19:12 Set A/D encoding result=40 00:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:12 Set channel filter=0.000000e+000 result=40 00:19:12 Config A/D Result=40 00:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:12 Get A/D filter: -9.255963e+061 result=40 00:19:12 Get A/D value=-858993460 result=40 00:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:12 Parameters OK 00:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:12 Set A/D data flow result=40 00:19:12 Set A/D channel type result=40 00:19:12 Set A/D encoding result=40 00:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:12 Set channel filter=0.000000e+000 result=40 00:19:12 Config A/D Result=40 00:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:12 Get A/D filter: -9.255963e+061 result=40 00:19:12 Get A/D value=-858993460 result=40 00:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:19:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:19:12 Aux= 00:19:12 Message to Camera, serial 124611 queued 00:19:49 Received message from Master: op=PointingHead serial=124624 00:19:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:19:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:19:50 Point started: ret=0 00:19:50 point_skyscan result=0 00:19:50 Check angles 00:19:50 SkyScan query 00:19:51 SkyScan query done: ret=0 az=153.195<-10213 ze=8.91<-11406 Statuses=0009 0009 00:19:51 Msec=0 True Az=153.195 Ze=8.91 Az status=0009 Ze status=0009 00:19:51 Check angles 00:19:51 SkyScan query 00:19:52 SkyScan query done: ret=0 az=135.78<-9052 ze=-12.045<-12803 Statuses=0009 0009 00:19:52 Msec=750 True Az=135.78 Ze=-12.045 Az status=0009 Ze status=0009 00:19:52 Check angles 00:19:52 SkyScan query 00:19:52 SkyScan query done: ret=0 az=118.26<-7884 ze=-32.985<-14199 Statuses=0009 0009 00:19:52 Msec=1500 True Az=118.26 Ze=-32.985 Az status=0009 Ze status=0009 00:19:53 Check angles 00:19:53 SkyScan query 00:19:53 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.555<-15437 Statuses=0009 0009 00:19:53 Msec=2250 True Az=100.38 Ze=-51.555 Az status=0009 Ze status=0009 00:19:53 Check angles 00:19:53 SkyScan query 00:19:54 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:19:54 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:19:54 Check angles 00:19:54 SkyScan query 00:19:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:19:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:19:55 Message to Master queued w/err=0: serial=124624 error=0 00:20:00 Received message from Master: op=Filter serial=124625 00:20:00 Color wheel filter change from 0 to 0 00:20:00 FLIGetFilterPos err=0 currentPosition=0 00:20:00 FLIGetStepsRemaining err=0 RemainingSteps=0 00:20:00 Filter is already there-color wheel unchanged 00:20:00 Received message from Master: op=Shutter serial=124626 00:20:00 Shutter LASER close 00:20:00 Received message from Camera: op=State serial=124628 00:20:00 GetSingleValue result=40 Value=cccccccc 00:20:00 SkyScan query 00:20:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:20:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:01 Parameters OK 00:20:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:01 Set A/D data flow result=40 00:20:01 Set A/D channel type result=40 00:20:01 Set A/D encoding result=40 00:20:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:01 Set channel filter=0.000000e+000 result=40 00:20:01 Config A/D Result=40 00:20:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:01 Get A/D filter: -9.255963e+061 result=40 00:20:01 Get A/D value=-858993460 result=40 00:20:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:01 Parameters OK 00:20:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:01 Set A/D data flow result=40 00:20:01 Set A/D channel type result=40 00:20:01 Set A/D encoding result=40 00:20:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:01 Set channel filter=0.000000e+000 result=40 00:20:01 Config A/D Result=40 00:20:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:01 Get A/D filter: -9.255963e+061 result=40 00:20:01 Get A/D value=-858993460 result=40 00:20:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:20:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:20:01 Aux= 00:20:01 Message to Camera, serial 124628 queued 00:20:37 Received message from Master: op=PointingHead serial=124641 00:20:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:20:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:20:38 Point started: ret=0 00:20:38 point_skyscan result=0 00:20:38 Check angles 00:20:38 SkyScan query 00:20:39 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.39<-17426 Statuses=0009 0009 00:20:39 Msec=0 True Az=109.125 Ze=-81.39 Az status=0009 Ze status=0009 00:20:39 Check angles 00:20:39 SkyScan query 00:20:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.345<-18823 Statuses=0008 0009 00:20:40 Msec=750 True Az=112.995 Ze=-102.345 Az status=0008 Ze status=0009 00:20:40 Check angles 00:20:40 SkyScan query 00:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.3<-20220 Statuses=0008 0009 00:20:41 Msec=1500 True Az=112.995 Ze=-123.3 Az status=0008 Ze status=0009 00:20:41 Check angles 00:20:41 SkyScan query 00:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.3<-21620 Statuses=0008 0009 00:20:41 Msec=2250 True Az=112.995 Ze=-144.3 Az status=0008 Ze status=0009 00:20:41 Check angles 00:20:41 SkyScan query 00:20:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.21<-23014 Statuses=0008 0009 00:20:42 Msec=3000 True Az=112.995 Ze=-165.21 Az status=0008 Ze status=0009 00:20:42 Check angles 00:20:42 SkyScan query 00:20:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 00:20:43 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 00:20:43 Message to Master queued w/err=0: serial=124641 error=0 00:20:48 Received message from Master: op=Filter serial=124642 00:20:48 Color wheel filter change from 0 to 0 00:20:48 FLIGetFilterPos err=0 currentPosition=0 00:20:48 FLIGetStepsRemaining err=0 RemainingSteps=0 00:20:48 Filter is already there-color wheel unchanged 00:20:48 Received message from Master: op=Shutter serial=124643 00:20:48 Shutter LASER open 00:20:48 Received message from Camera: op=State serial=124645 00:20:48 GetSingleValue result=40 Value=cccccccc 00:20:48 SkyScan query 00:20:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:20:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:49 Parameters OK 00:20:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:49 Set A/D data flow result=40 00:20:49 Set A/D channel type result=40 00:20:49 Set A/D encoding result=40 00:20:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:49 Set channel filter=0.000000e+000 result=40 00:20:49 Config A/D Result=40 00:20:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:49 Get A/D filter: -9.255963e+061 result=40 00:20:49 Get A/D value=-858993460 result=40 00:20:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:49 Parameters OK 00:20:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:49 Set A/D data flow result=40 00:20:49 Set A/D channel type result=40 00:20:49 Set A/D encoding result=40 00:20:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:49 Set channel filter=0.000000e+000 result=40 00:20:49 Config A/D Result=40 00:20:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:49 Get A/D filter: -9.255963e+061 result=40 00:20:49 Get A/D value=-858993460 result=40 00:20:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:20:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:20:49 Aux= 00:20:49 Message to Camera, serial 124645 queued 00:20:56 Received message from Master: op=Shutter serial=124654 00:20:56 Shutter LASER close 00:20:57 Received message from Master: op=PointingHead serial=124658 00:20:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:20:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:20:57 Point started: ret=0 00:20:57 point_skyscan result=0 00:20:58 Check angles 00:20:58 SkyScan query 00:20:58 SkyScan query done: ret=0 az=89.865<-5991 ze=157.215<-1519 Statuses=0009 0009 00:20:58 Msec=0 True Az=89.865 Ze=157.215 Az status=0009 Ze status=0009 00:20:59 Check angles 00:20:59 SkyScan query 00:20:59 SkyScan query done: ret=0 az=72.465<-4831 ze=136.275<-2915 Statuses=0009 0009 00:20:59 Msec=750 True Az=72.465 Ze=136.275 Az status=0009 Ze status=0009 00:20:59 Check angles 00:20:59 SkyScan query 00:21:00 SkyScan query done: ret=0 az=55.095<-3673 ze=115.365<-4309 Statuses=0009 0009 00:21:00 Msec=1500 True Az=55.095 Ze=115.365 Az status=0009 Ze status=0009 00:21:00 Check angles 00:21:00 SkyScan query 00:21:01 SkyScan query done: ret=0 az=41.025<-2735 ze=93.93<-5738 Statuses=0009 0009 00:21:01 Msec=2250 True Az=41.025 Ze=93.93 Az status=0009 Ze status=0009 00:21:01 Check angles 00:21:01 SkyScan query 00:21:01 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 00:21:01 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 00:21:02 Check angles 00:21:02 SkyScan query 00:21:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 00:21:02 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 00:21:02 Check angles 00:21:02 SkyScan query 00:21:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:21:03 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:21:03 Message to Master queued w/err=0: serial=124658 error=0 00:21:08 Received message from Master: op=Filter serial=124659 00:21:08 Color wheel filter change from 0 to 0 00:21:08 FLIGetFilterPos err=0 currentPosition=0 00:21:08 FLIGetStepsRemaining err=0 RemainingSteps=0 00:21:08 Filter is already there-color wheel unchanged 00:21:08 Received message from Master: op=Shutter serial=124660 00:21:08 Shutter LASER close 00:21:08 Received message from Camera: op=State serial=124662 00:21:08 GetSingleValue result=40 Value=cccccccc 00:21:08 SkyScan query 00:21:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:21:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:09 Parameters OK 00:21:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:09 Set A/D data flow result=40 00:21:09 Set A/D channel type result=40 00:21:09 Set A/D encoding result=40 00:21:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:09 Set channel filter=0.000000e+000 result=40 00:21:09 Config A/D Result=40 00:21:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:09 Get A/D filter: -9.255963e+061 result=40 00:21:09 Get A/D value=-858993460 result=40 00:21:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:09 Parameters OK 00:21:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:09 Set A/D data flow result=40 00:21:09 Set A/D channel type result=40 00:21:09 Set A/D encoding result=40 00:21:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:09 Set channel filter=0.000000e+000 result=40 00:21:09 Config A/D Result=40 00:21:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:09 Get A/D filter: -9.255963e+061 result=40 00:21:09 Get A/D value=-858993460 result=40 00:21:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:21:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:21:09 Aux= 00:21:09 Message to Camera, serial 124662 queued 00:21:46 Received message from Master: op=PointingHead serial=124675 00:21:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:21:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:21:46 Point started: ret=0 00:21:46 point_skyscan result=0 00:21:47 Check angles 00:21:47 SkyScan query 00:21:47 SkyScan query done: ret=0 az=40.995<-2733 ze=21.24<-10584 Statuses=0008 0009 00:21:47 Msec=0 True Az=40.995 Ze=21.24 Az status=0008 Ze status=0009 00:21:48 Check angles 00:21:48 SkyScan query 00:21:48 SkyScan query done: ret=0 az=40.995<-2733 ze=0.285<-11981 Statuses=0008 0009 00:21:48 Msec=750 True Az=40.995 Ze=0.285 Az status=0008 Ze status=0009 00:21:48 Check angles 00:21:48 SkyScan query 00:21:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.105<-13407 Statuses=0008 0009 00:21:49 Msec=1500 True Az=40.995 Ze=-21.105 Az status=0008 Ze status=0009 00:21:49 Check angles 00:21:49 SkyScan query 00:21:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:21:50 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:21:50 Check angles 00:21:50 SkyScan query 00:21:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:21:50 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:21:50 Message to Master queued w/err=0: serial=124675 error=0 00:21:55 Received message from Master: op=Filter serial=124676 00:21:55 Color wheel filter change from 0 to 0 00:21:55 FLIGetFilterPos err=0 currentPosition=0 00:21:55 FLIGetStepsRemaining err=0 RemainingSteps=0 00:21:55 Filter is already there-color wheel unchanged 00:21:56 Received message from Master: op=Shutter serial=124677 00:21:56 Shutter LASER close 00:21:56 Received message from Camera: op=State serial=124679 00:21:56 GetSingleValue result=40 Value=cccccccc 00:21:56 SkyScan query 00:21:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:21:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:56 Parameters OK 00:21:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:56 Set A/D data flow result=40 00:21:56 Set A/D channel type result=40 00:21:56 Set A/D encoding result=40 00:21:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:56 Set channel filter=0.000000e+000 result=40 00:21:56 Config A/D Result=40 00:21:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:56 Get A/D filter: -9.255963e+061 result=40 00:21:56 Get A/D value=-858993460 result=40 00:21:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:56 Parameters OK 00:21:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:56 Set A/D data flow result=40 00:21:56 Set A/D channel type result=40 00:21:56 Set A/D encoding result=40 00:21:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:56 Set channel filter=0.000000e+000 result=40 00:21:56 Config A/D Result=40 00:21:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:56 Get A/D filter: -9.255963e+061 result=40 00:21:56 Get A/D value=-858993460 result=40 00:21:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:21:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:21:56 Aux= 00:21:56 Message to Camera, serial 124679 queued 00:22:33 Received message from Master: op=PointingHead serial=124692 00:22:33 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:22:33 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:22:33 Point started: ret=0 00:22:33 point_skyscan result=0 00:22:34 Check angles 00:22:34 SkyScan query 00:22:35 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.265<-16551 Statuses=0009 0009 00:22:35 Msec=0 True Az=63.9 Ze=-68.265 Az status=0009 Ze status=0009 00:22:35 Check angles 00:22:35 SkyScan query 00:22:35 SkyScan query done: ret=0 az=81.495<-5433 ze=-89.25<-17950 Statuses=0009 0009 00:22:35 Msec=750 True Az=81.495 Ze=-89.25 Az status=0009 Ze status=0009 00:22:36 Check angles 00:22:36 SkyScan query 00:22:36 SkyScan query done: ret=0 az=99.3<-6620 ze=-110.67<-19378 Statuses=0009 0009 00:22:36 Msec=1500 True Az=99.3 Ze=-110.67 Az status=0009 Ze status=0009 00:22:36 Check angles 00:22:36 SkyScan query 00:22:37 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.61<-20774 Statuses=0009 0009 00:22:37 Msec=2250 True Az=116.775 Ze=-131.61 Az status=0009 Ze status=0009 00:22:37 Check angles 00:22:37 SkyScan query 00:22:38 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 00:22:38 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 00:22:38 Check angles 00:22:38 SkyScan query 00:22:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 00:22:39 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 00:22:39 Message to Master queued w/err=0: serial=124692 error=0 00:22:44 Received message from Master: op=Filter serial=124693 00:22:44 Color wheel filter change from 0 to 0 00:22:44 FLIGetFilterPos err=0 currentPosition=0 00:22:44 FLIGetStepsRemaining err=0 RemainingSteps=0 00:22:44 Filter is already there-color wheel unchanged 00:22:44 Received message from Master: op=Shutter serial=124694 00:22:44 Shutter LASER close 00:22:44 Received message from Camera: op=State serial=124696 00:22:44 GetSingleValue result=40 Value=cccccccc 00:22:44 SkyScan query 00:22:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:22:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:44 Parameters OK 00:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:44 Set A/D data flow result=40 00:22:44 Set A/D channel type result=40 00:22:44 Set A/D encoding result=40 00:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:44 Set channel filter=0.000000e+000 result=40 00:22:44 Config A/D Result=40 00:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:44 Get A/D filter: -9.255963e+061 result=40 00:22:44 Get A/D value=-858993460 result=40 00:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:44 Parameters OK 00:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:44 Set A/D data flow result=40 00:22:44 Set A/D channel type result=40 00:22:44 Set A/D encoding result=40 00:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:44 Set channel filter=0.000000e+000 result=40 00:22:44 Config A/D Result=40 00:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:44 Get A/D filter: -9.255963e+061 result=40 00:22:44 Get A/D value=-858993460 result=40 00:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:22:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:22:44 Aux= 00:22:44 Message to Camera, serial 124696 queued 00:23:21 Received message from Master: op=PointingHead serial=124709 00:23:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:23:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:23:21 Point started: ret=0 00:23:21 point_skyscan result=0 00:23:22 Check angles 00:23:22 SkyScan query 00:23:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 00:23:23 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 00:23:23 Check angles 00:23:23 SkyScan query 00:23:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:23:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:23:24 Message to Master queued w/err=0: serial=124709 error=0 00:23:29 Received message from Master: op=Filter serial=124710 00:23:29 Color wheel filter change from 0 to 0 00:23:29 FLIGetFilterPos err=0 currentPosition=0 00:23:29 FLIGetStepsRemaining err=0 RemainingSteps=0 00:23:29 Filter is already there-color wheel unchanged 00:23:29 Received message from Master: op=Shutter serial=124711 00:23:29 Shutter LASER open 00:23:29 Received message from Camera: op=State serial=124713 00:23:29 GetSingleValue result=40 Value=cccccccc 00:23:29 SkyScan query 00:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:23:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:29 Parameters OK 00:23:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:29 Set A/D data flow result=40 00:23:29 Set A/D channel type result=40 00:23:29 Set A/D encoding result=40 00:23:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:29 Set channel filter=0.000000e+000 result=40 00:23:29 Config A/D Result=40 00:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:29 Get A/D filter: -9.255963e+061 result=40 00:23:29 Get A/D value=-858993460 result=40 00:23:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:29 Parameters OK 00:23:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:29 Set A/D data flow result=40 00:23:29 Set A/D channel type result=40 00:23:29 Set A/D encoding result=40 00:23:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:29 Set channel filter=0.000000e+000 result=40 00:23:29 Config A/D Result=40 00:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:29 Get A/D filter: -9.255963e+061 result=40 00:23:29 Get A/D value=-858993460 result=40 00:23:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:23:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:23:29 Aux= 00:23:29 Message to Camera, serial 124713 queued 00:23:38 Received message from Master: op=Shutter serial=124723 00:23:38 Shutter LASER close 00:23:39 Received message from Master: op=PointingHead serial=124727 00:23:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:23:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:23:39 Point started: ret=0 00:23:39 point_skyscan result=0 00:23:40 Check angles 00:23:40 SkyScan query 00:23:40 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.92<-21528 Statuses=0009 0009 00:23:40 Msec=0 True Az=136.155 Ze=-142.92 Az status=0009 Ze status=0009 00:23:40 Check angles 00:23:40 SkyScan query 00:23:41 SkyScan query done: ret=0 az=153.675<-10245 ze=-121.935<-20129 Statuses=0009 0009 00:23:41 Msec=750 True Az=153.675 Ze=-121.935 Az status=0009 Ze status=0009 00:23:41 Check angles 00:23:41 SkyScan query 00:23:42 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.055<-18737 Statuses=0009 0009 00:23:42 Msec=1500 True Az=171.225 Ze=-101.055 Az status=0009 Ze status=0009 00:23:42 Check angles 00:23:42 SkyScan query 00:23:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.65<-17310 Statuses=0008 0009 00:23:42 Msec=2250 True Az=176.01 Ze=-79.65 Az status=0008 Ze status=0009 00:23:43 Check angles 00:23:43 SkyScan query 00:23:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.17<-15878 Statuses=0008 0009 00:23:43 Msec=3000 True Az=176.01 Ze=-58.17 Az status=0008 Ze status=0009 00:23:43 Check angles 00:23:43 SkyScan query 00:23:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 00:23:44 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 00:23:44 Message to Master queued w/err=0: serial=124727 error=0 00:23:49 Received message from Master: op=Filter serial=124728 00:23:49 Color wheel filter change from 0 to 0 00:23:49 FLIGetFilterPos err=0 currentPosition=0 00:23:49 FLIGetStepsRemaining err=0 RemainingSteps=0 00:23:49 Filter is already there-color wheel unchanged 00:23:49 Received message from Master: op=Shutter serial=124729 00:23:49 Shutter LASER close 00:23:49 Received message from Camera: op=State serial=124731 00:23:49 GetSingleValue result=40 Value=cccccccc 00:23:49 SkyScan query 00:23:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:23:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:50 Parameters OK 00:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:50 Set A/D data flow result=40 00:23:50 Set A/D channel type result=40 00:23:50 Set A/D encoding result=40 00:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:50 Set channel filter=0.000000e+000 result=40 00:23:50 Config A/D Result=40 00:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:50 Get A/D filter: -9.255963e+061 result=40 00:23:50 Get A/D value=-858993460 result=40 00:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:50 Parameters OK 00:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:50 Set A/D data flow result=40 00:23:50 Set A/D channel type result=40 00:23:50 Set A/D encoding result=40 00:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:50 Set channel filter=0.000000e+000 result=40 00:23:50 Config A/D Result=40 00:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:50 Get A/D filter: -9.255963e+061 result=40 00:23:50 Get A/D value=-858993460 result=40 00:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:23:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:23:50 Aux= 00:23:50 Message to Camera, serial 124731 queued 00:24:27 Received message from Master: op=PointingHead serial=124744 00:24:27 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:24:27 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:24:27 Point started: ret=0 00:24:27 point_skyscan result=0 00:24:28 Check angles 00:24:28 SkyScan query 00:24:28 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.72<-13448 Statuses=0009 0009 00:24:28 Msec=0 True Az=152.97 Ze=-21.72 Az status=0009 Ze status=0009 00:24:29 Check angles 00:24:29 SkyScan query 00:24:29 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.69<-12046 Statuses=0009 0009 00:24:29 Msec=750 True Az=135.405 Ze=-0.69 Az status=0009 Ze status=0009 00:24:29 Check angles 00:24:29 SkyScan query 00:24:30 SkyScan query done: ret=0 az=117.945<-7863 ze=20.22<-10652 Statuses=0009 0009 00:24:30 Msec=1500 True Az=117.945 Ze=20.22 Az status=0009 Ze status=0009 00:24:30 Check angles 00:24:30 SkyScan query 00:24:31 SkyScan query done: ret=0 az=100.575<-6705 ze=41.22<-9252 Statuses=0009 0009 00:24:31 Msec=2250 True Az=100.575 Ze=41.22 Az status=0009 Ze status=0009 00:24:31 Check angles 00:24:31 SkyScan query 00:24:31 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 00:24:31 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 00:24:32 Check angles 00:24:32 SkyScan query 00:24:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:24:32 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:24:32 Message to Master queued w/err=0: serial=124744 error=0 00:24:37 Received message from Master: op=Filter serial=124745 00:24:37 Color wheel filter change from 0 to 0 00:24:37 FLIGetFilterPos err=0 currentPosition=0 00:24:37 FLIGetStepsRemaining err=0 RemainingSteps=0 00:24:37 Filter is already there-color wheel unchanged 00:24:37 Received message from Master: op=Shutter serial=124746 00:24:37 Shutter LASER close 00:24:37 Received message from Camera: op=State serial=124748 00:24:37 GetSingleValue result=40 Value=cccccccc 00:24:37 SkyScan query 00:24:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:24:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:38 Parameters OK 00:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:38 Set A/D data flow result=40 00:24:38 Set A/D channel type result=40 00:24:38 Set A/D encoding result=40 00:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:38 Set channel filter=0.000000e+000 result=40 00:24:38 Config A/D Result=40 00:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:38 Get A/D filter: -9.255963e+061 result=40 00:24:38 Get A/D value=-858993460 result=40 00:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:38 Parameters OK 00:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:38 Set A/D data flow result=40 00:24:38 Set A/D channel type result=40 00:24:38 Set A/D encoding result=40 00:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:38 Set channel filter=0.000000e+000 result=40 00:24:38 Config A/D Result=40 00:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:38 Get A/D filter: -9.255963e+061 result=40 00:24:38 Get A/D value=-858993460 result=40 00:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:24:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:24:38 Aux= 00:24:38 Message to Camera, serial 124748 queued 00:25:15 Received message from Master: op=PointingHead serial=124761 00:25:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:25:15 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:25:15 Point started: ret=0 00:25:15 point_skyscan result=0 00:25:16 Check angles 00:25:16 SkyScan query 00:25:16 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 00:25:16 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 00:25:17 Check angles 00:25:17 SkyScan query 00:25:17 SkyScan query done: ret=0 az=126.405<-8427 ze=38.49<-9434 Statuses=0009 0008 00:25:17 Msec=750 True Az=126.405 Ze=38.49 Az status=0009 Ze status=0008 00:25:17 Check angles 00:25:17 SkyScan query 00:25:18 SkyScan query done: ret=0 az=143.82<-9588 ze=38.505<-9433 Statuses=0009 0008 00:25:18 Msec=1500 True Az=143.82 Ze=38.505 Az status=0009 Ze status=0008 00:25:18 Check angles 00:25:18 SkyScan query 00:25:19 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 00:25:19 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 00:25:19 Check angles 00:25:19 SkyScan query 00:25:20 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:25:20 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:25:20 Check angles 00:25:20 SkyScan query 00:25:20 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:25:20 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:25:20 Message to Master queued w/err=0: serial=124761 error=0 00:25:25 Received message from Master: op=Filter serial=124762 00:25:25 Color wheel filter change from 0 to 0 00:25:25 FLIGetFilterPos err=0 currentPosition=0 00:25:25 FLIGetStepsRemaining err=0 RemainingSteps=0 00:25:25 Filter is already there-color wheel unchanged 00:25:25 Received message from Master: op=Shutter serial=124763 00:25:25 Shutter LASER close 00:25:25 Received message from Camera: op=State serial=124765 00:25:25 GetSingleValue result=40 Value=cccccccc 00:25:25 SkyScan query 00:25:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:25:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:26 Parameters OK 00:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:26 Set A/D data flow result=40 00:25:26 Set A/D channel type result=40 00:25:26 Set A/D encoding result=40 00:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:26 Set channel filter=0.000000e+000 result=40 00:25:26 Config A/D Result=40 00:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:26 Get A/D filter: -9.255963e+061 result=40 00:25:26 Get A/D value=-858993460 result=40 00:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:26 Parameters OK 00:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:26 Set A/D data flow result=40 00:25:26 Set A/D channel type result=40 00:25:26 Set A/D encoding result=40 00:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:26 Set channel filter=0.000000e+000 result=40 00:25:26 Config A/D Result=40 00:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:26 Get A/D filter: -9.255963e+061 result=40 00:25:26 Get A/D value=-858993460 result=40 00:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:25:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:25:26 Aux= 00:25:26 Message to Camera, serial 124765 queued 00:26:03 Received message from Master: op=PointingHead serial=124778 00:26:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:26:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:26:03 Point started: ret=0 00:26:03 point_skyscan result=0 00:26:04 Check angles 00:26:04 SkyScan query 00:26:05 SkyScan query done: ret=0 az=152.625<-10175 ze=8.34<-11444 Statuses=0009 0009 00:26:05 Msec=0 True Az=152.625 Ze=8.34 Az status=0009 Ze status=0009 00:26:05 Check angles 00:26:05 SkyScan query 00:26:05 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.585<-12839 Statuses=0009 0009 00:26:05 Msec=750 True Az=135.135 Ze=-12.585 Az status=0009 Ze status=0009 00:26:05 Check angles 00:26:05 SkyScan query 00:26:06 SkyScan query done: ret=0 az=117.285<-7819 ze=-34.005<-14267 Statuses=0009 0009 00:26:06 Msec=1500 True Az=117.285 Ze=-34.005 Az status=0009 Ze status=0009 00:26:06 Check angles 00:26:06 SkyScan query 00:26:07 SkyScan query done: ret=0 az=99.495<-6633 ze=-51.555<-15437 Statuses=0009 0009 00:26:07 Msec=2250 True Az=99.495 Ze=-51.555 Az status=0009 Ze status=0009 00:26:07 Check angles 00:26:07 SkyScan query 00:26:08 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 00:26:08 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 00:26:08 Check angles 00:26:08 SkyScan query 00:26:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:26:08 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:26:08 Message to Master queued w/err=0: serial=124778 error=0 00:26:13 Received message from Master: op=Filter serial=124779 [UTC 2018-12-14 00:26:13] 00:26:13 Color wheel filter change from 0 to 0 00:26:13 FLIGetFilterPos err=0 currentPosition=0 00:26:13 FLIGetStepsRemaining err=0 RemainingSteps=0 00:26:13 Filter is already there-color wheel unchanged 00:26:14 Received message from Master: op=Shutter serial=124780 00:26:14 Shutter LASER close 00:26:14 Received message from Camera: op=State serial=124782 00:26:14 GetSingleValue result=40 Value=cccccccc 00:26:14 SkyScan query 00:26:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:26:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:14 Parameters OK 00:26:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:14 Set A/D data flow result=40 00:26:14 Set A/D channel type result=40 00:26:14 Set A/D encoding result=40 00:26:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:14 Set channel filter=0.000000e+000 result=40 00:26:14 Config A/D Result=40 00:26:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:14 Get A/D filter: -9.255963e+061 result=40 00:26:14 Get A/D value=-858993460 result=40 00:26:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:14 Parameters OK 00:26:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:14 Set A/D data flow result=40 00:26:14 Set A/D channel type result=40 00:26:14 Set A/D encoding result=40 00:26:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:14 Set channel filter=0.000000e+000 result=40 00:26:14 Config A/D Result=40 00:26:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:14 Get A/D filter: -9.255963e+061 result=40 00:26:14 Get A/D value=-858993460 result=40 00:26:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:26:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:26:14 Aux= 00:26:14 Message to Camera, serial 124782 queued 00:26:51 Received message from Master: op=PointingHead serial=124795 00:26:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:26:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:26:51 Point started: ret=0 00:26:51 point_skyscan result=0 00:26:52 Check angles 00:26:52 SkyScan query 00:26:53 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.015<-17401 Statuses=0009 0009 00:26:53 Msec=0 True Az=108.795 Ze=-81.015 Az status=0009 Ze status=0009 00:26:53 Check angles 00:26:53 SkyScan query 00:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 00:26:53 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 00:26:54 Check angles 00:26:54 SkyScan query 00:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 00:26:54 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 00:26:54 Check angles 00:26:54 SkyScan query 00:26:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 00:26:55 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 00:26:55 Check angles 00:26:55 SkyScan query 00:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.705<-23047 Statuses=0008 0009 00:26:56 Msec=3000 True Az=112.995 Ze=-165.705 Az status=0008 Ze status=0009 00:26:56 Check angles 00:26:56 SkyScan query 00:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:26:56 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:26:56 Message to Master queued w/err=0: serial=124795 error=0 00:27:01 Received message from Master: op=Filter serial=124796 00:27:01 Color wheel filter change from 0 to 0 00:27:01 FLIGetFilterPos err=0 currentPosition=0 00:27:01 FLIGetStepsRemaining err=0 RemainingSteps=0 00:27:01 Filter is already there-color wheel unchanged 00:27:02 Received message from Master: op=Shutter serial=124797 00:27:02 Shutter LASER open 00:27:02 Received message from Camera: op=State serial=124799 00:27:02 GetSingleValue result=40 Value=cccccccc 00:27:02 SkyScan query 00:27:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:27:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:02 Parameters OK 00:27:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:02 Set A/D data flow result=40 00:27:02 Set A/D channel type result=40 00:27:02 Set A/D encoding result=40 00:27:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:02 Set channel filter=0.000000e+000 result=40 00:27:02 Config A/D Result=40 00:27:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:02 Get A/D filter: -9.255963e+061 result=40 00:27:02 Get A/D value=-858993460 result=40 00:27:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:02 Parameters OK 00:27:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:02 Set A/D data flow result=40 00:27:02 Set A/D channel type result=40 00:27:02 Set A/D encoding result=40 00:27:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:02 Set channel filter=0.000000e+000 result=40 00:27:02 Config A/D Result=40 00:27:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:02 Get A/D filter: -9.255963e+061 result=40 00:27:02 Get A/D value=-858993460 result=40 00:27:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:27:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:27:02 Aux= 00:27:02 Message to Camera, serial 124799 queued 00:27:10 Received message from Master: op=Shutter serial=124808 00:27:10 Shutter LASER close 00:27:10 Received message from Master: op=PointingHead serial=124812 00:27:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:27:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:27:11 Point started: ret=0 00:27:11 point_skyscan result=0 00:27:11 Check angles 00:27:11 SkyScan query 00:27:12 SkyScan query done: ret=0 az=89.58<-5972 ze=156.765<-1549 Statuses=0009 0009 00:27:12 Msec=0 True Az=89.58 Ze=156.765 Az status=0009 Ze status=0009 00:27:12 Check angles 00:27:12 SkyScan query 00:27:13 SkyScan query done: ret=0 az=72.03<-4802 ze=135.825<-2945 Statuses=0009 0009 00:27:13 Msec=750 True Az=72.03 Ze=135.825 Az status=0009 Ze status=0009 00:27:13 Check angles 00:27:13 SkyScan query 00:27:14 SkyScan query done: ret=0 az=54.705<-3647 ze=114.87<-4342 Statuses=0009 0009 00:27:14 Msec=1500 True Az=54.705 Ze=114.87 Az status=0009 Ze status=0009 00:27:14 Check angles 00:27:14 SkyScan query 00:27:14 SkyScan query done: ret=0 az=41.025<-2735 ze=93.9<-5740 Statuses=0009 0009 00:27:14 Msec=2250 True Az=41.025 Ze=93.9 Az status=0009 Ze status=0009 00:27:14 Check angles 00:27:14 SkyScan query 00:27:15 SkyScan query done: ret=0 az=40.995<-2733 ze=72.93<-7138 Statuses=0008 0009 00:27:15 Msec=3000 True Az=40.995 Ze=72.93 Az status=0008 Ze status=0009 00:27:15 Check angles 00:27:15 SkyScan query 00:27:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 00:27:16 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 00:27:16 Check angles 00:27:16 SkyScan query 00:27:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:27:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:27:17 Message to Master queued w/err=0: serial=124812 error=0 00:27:22 Received message from Master: op=Filter serial=124813 00:27:22 Color wheel filter change from 0 to 0 00:27:22 FLIGetFilterPos err=0 currentPosition=0 00:27:22 FLIGetStepsRemaining err=0 RemainingSteps=0 00:27:22 Filter is already there-color wheel unchanged 00:27:22 Received message from Master: op=Shutter serial=124814 00:27:22 Shutter LASER close 00:27:22 Received message from Camera: op=State serial=124816 00:27:22 GetSingleValue result=40 Value=cccccccc 00:27:22 SkyScan query 00:27:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:27:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:22 Parameters OK 00:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:22 Set A/D data flow result=40 00:27:22 Set A/D channel type result=40 00:27:22 Set A/D encoding result=40 00:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:22 Set channel filter=0.000000e+000 result=40 00:27:22 Config A/D Result=40 00:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:22 Get A/D filter: -9.255963e+061 result=40 00:27:22 Get A/D value=-858993460 result=40 00:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:22 Parameters OK 00:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:22 Set A/D data flow result=40 00:27:22 Set A/D channel type result=40 00:27:22 Set A/D encoding result=40 00:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:22 Set channel filter=0.000000e+000 result=40 00:27:22 Config A/D Result=40 00:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:22 Get A/D filter: -9.255963e+061 result=40 00:27:22 Get A/D value=-858993460 result=40 00:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:27:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:27:22 Aux= 00:27:22 Message to Camera, serial 124816 queued 00:27:59 Received message from Master: op=PointingHead serial=124829 00:27:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:27:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:28:00 Point started: ret=0 00:28:00 point_skyscan result=0 00:28:01 Check angles 00:28:01 SkyScan query 00:28:01 SkyScan query done: ret=0 az=40.995<-2733 ze=21.255<-10583 Statuses=0008 0009 00:28:01 Msec=0 True Az=40.995 Ze=21.255 Az status=0008 Ze status=0009 00:28:01 Check angles 00:28:01 SkyScan query 00:28:02 SkyScan query done: ret=0 az=40.995<-2733 ze=0.27<-11982 Statuses=0008 0009 00:28:02 Msec=750 True Az=40.995 Ze=0.27 Az status=0008 Ze status=0009 00:28:02 Check angles 00:28:02 SkyScan query 00:28:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.105<-13407 Statuses=0008 0009 00:28:03 Msec=1500 True Az=40.995 Ze=-21.105 Az status=0008 Ze status=0009 00:28:03 Check angles 00:28:03 SkyScan query 00:28:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:28:03 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:28:04 Check angles 00:28:04 SkyScan query 00:28:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:28:04 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:28:04 Message to Master queued w/err=0: serial=124829 error=0 00:28:09 Received message from Master: op=Filter serial=124830 00:28:09 Color wheel filter change from 0 to 0 00:28:09 FLIGetFilterPos err=0 currentPosition=0 00:28:09 FLIGetStepsRemaining err=0 RemainingSteps=0 00:28:09 Filter is already there-color wheel unchanged 00:28:09 Received message from Master: op=Shutter serial=124831 00:28:09 Shutter LASER close 00:28:09 Received message from Camera: op=State serial=124833 00:28:09 GetSingleValue result=40 Value=cccccccc 00:28:09 SkyScan query 00:28:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:28:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:10 Parameters OK 00:28:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:10 Set A/D data flow result=40 00:28:10 Set A/D channel type result=40 00:28:10 Set A/D encoding result=40 00:28:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:10 Set channel filter=0.000000e+000 result=40 00:28:10 Config A/D Result=40 00:28:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:10 Get A/D filter: -9.255963e+061 result=40 00:28:10 Get A/D value=-858993460 result=40 00:28:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:10 Parameters OK 00:28:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:10 Set A/D data flow result=40 00:28:10 Set A/D channel type result=40 00:28:10 Set A/D encoding result=40 00:28:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:10 Set channel filter=0.000000e+000 result=40 00:28:10 Config A/D Result=40 00:28:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:10 Get A/D filter: -9.255963e+061 result=40 00:28:10 Get A/D value=-858993460 result=40 00:28:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:28:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:28:10 Aux= 00:28:10 Message to Camera, serial 124833 queued 00:28:47 Received message from Master: op=PointingHead serial=124846 00:28:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:28:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:28:47 Point started: ret=0 00:28:47 point_skyscan result=0 00:28:48 Check angles 00:28:48 SkyScan query 00:28:48 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.625<-16575 Statuses=0009 0009 00:28:48 Msec=0 True Az=64.17 Ze=-68.625 Az status=0009 Ze status=0009 00:28:49 Check angles 00:28:49 SkyScan query 00:28:49 SkyScan query done: ret=0 az=82.14<-5476 ze=-90.03<-18002 Statuses=0009 0009 00:28:49 Msec=750 True Az=82.14 Ze=-90.03 Az status=0009 Ze status=0009 00:28:49 Check angles 00:28:49 SkyScan query 00:28:50 SkyScan query done: ret=0 az=99.51<-6634 ze=-111<-19400 Statuses=0009 0009 00:28:50 Msec=1500 True Az=99.51 Ze=-111 Az status=0009 Ze status=0009 00:28:50 Check angles 00:28:50 SkyScan query 00:28:51 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.925<-20795 Statuses=0009 0009 00:28:51 Msec=2250 True Az=117.045 Ze=-131.925 Az status=0009 Ze status=0009 00:28:51 Check angles 00:28:51 SkyScan query 00:28:52 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 00:28:52 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 00:28:52 Check angles 00:28:52 SkyScan query 00:28:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 00:28:52 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 00:28:52 Message to Master queued w/err=0: serial=124846 error=0 00:28:57 Received message from Master: op=Filter serial=124847 00:28:57 Color wheel filter change from 0 to 0 00:28:57 FLIGetFilterPos err=0 currentPosition=0 00:28:57 FLIGetStepsRemaining err=0 RemainingSteps=0 00:28:57 Filter is already there-color wheel unchanged 00:28:57 Received message from Master: op=Shutter serial=124848 00:28:57 Shutter LASER close 00:28:57 Received message from Camera: op=State serial=124850 00:28:57 GetSingleValue result=40 Value=cccccccc 00:28:57 SkyScan query 00:28:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:28:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:58 Parameters OK 00:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:58 Set A/D data flow result=40 00:28:58 Set A/D channel type result=40 00:28:58 Set A/D encoding result=40 00:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:58 Set channel filter=0.000000e+000 result=40 00:28:58 Config A/D Result=40 00:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:58 Get A/D filter: -9.255963e+061 result=40 00:28:58 Get A/D value=-858993460 result=40 00:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:58 Parameters OK 00:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:58 Set A/D data flow result=40 00:28:58 Set A/D channel type result=40 00:28:58 Set A/D encoding result=40 00:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:58 Set channel filter=0.000000e+000 result=40 00:28:58 Config A/D Result=40 00:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:58 Get A/D filter: -9.255963e+061 result=40 00:28:58 Get A/D value=-858993460 result=40 00:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:28:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:28:58 Aux= 00:28:58 Message to Camera, serial 124850 queued 00:29:35 Received message from Master: op=PointingHead serial=124863 00:29:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:29:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:29:35 Point started: ret=0 00:29:35 point_skyscan result=0 00:29:36 Check angles 00:29:36 SkyScan query 00:29:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 00:29:37 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 00:29:37 Check angles 00:29:37 SkyScan query 00:29:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:29:37 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:29:37 Message to Master queued w/err=0: serial=124863 error=0 00:29:42 Received message from Master: op=Filter serial=124864 00:29:42 Color wheel filter change from 0 to 0 00:29:42 FLIGetFilterPos err=0 currentPosition=0 00:29:42 FLIGetStepsRemaining err=0 RemainingSteps=0 00:29:42 Filter is already there-color wheel unchanged 00:29:42 Received message from Master: op=Shutter serial=124865 00:29:42 Shutter LASER open 00:29:43 Received message from Camera: op=State serial=124867 00:29:43 GetSingleValue result=40 Value=cccccccc 00:29:43 SkyScan query 00:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:29:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:43 Parameters OK 00:29:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:43 Set A/D data flow result=40 00:29:43 Set A/D channel type result=40 00:29:43 Set A/D encoding result=40 00:29:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:43 Set channel filter=0.000000e+000 result=40 00:29:43 Config A/D Result=40 00:29:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:43 Get A/D filter: -9.255963e+061 result=40 00:29:43 Get A/D value=-858993460 result=40 00:29:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:43 Parameters OK 00:29:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:43 Set A/D data flow result=40 00:29:43 Set A/D channel type result=40 00:29:43 Set A/D encoding result=40 00:29:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:43 Set channel filter=0.000000e+000 result=40 00:29:43 Config A/D Result=40 00:29:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:43 Get A/D filter: -9.255963e+061 result=40 00:29:43 Get A/D value=-858993460 result=40 00:29:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:29:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:29:43 Aux= 00:29:43 Message to Camera, serial 124867 queued 00:29:51 Received message from Master: op=Shutter serial=124876 00:29:51 Shutter LASER close 00:29:51 Received message from Master: op=PointingHead serial=124880 00:29:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:29:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:29:52 Point started: ret=0 00:29:52 point_skyscan result=0 00:29:52 Check angles 00:29:52 SkyScan query 00:29:53 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.1<-21540 Statuses=0009 0009 00:29:53 Msec=0 True Az=136.02 Ze=-143.1 Az status=0009 Ze status=0009 00:29:53 Check angles 00:29:53 SkyScan query 00:29:54 SkyScan query done: ret=0 az=153.84<-10256 ze=-121.695<-20113 Statuses=0009 0009 00:29:54 Msec=750 True Az=153.84 Ze=-121.695 Az status=0009 Ze status=0009 00:29:54 Check angles 00:29:54 SkyScan query 00:29:55 SkyScan query done: ret=0 az=171.375<-11425 ze=-100.74<-18716 Statuses=0009 0009 00:29:55 Msec=1500 True Az=171.375 Ze=-100.74 Az status=0009 Ze status=0009 00:29:55 Check angles 00:29:55 SkyScan query 00:29:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.845<-17323 Statuses=0008 0009 00:29:55 Msec=2250 True Az=176.01 Ze=-79.845 Az status=0008 Ze status=0009 00:29:55 Check angles 00:29:55 SkyScan query 00:29:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.845<-15923 Statuses=0008 0009 00:29:56 Msec=3000 True Az=176.01 Ze=-58.845 Az status=0008 Ze status=0009 00:29:56 Check angles 00:29:56 SkyScan query 00:29:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:29:57 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:29:57 Message to Master queued w/err=0: serial=124880 error=0 00:30:02 Received message from Master: op=Filter serial=124881 00:30:02 Color wheel filter change from 0 to 0 00:30:02 FLIGetFilterPos err=0 currentPosition=0 00:30:02 FLIGetStepsRemaining err=0 RemainingSteps=0 00:30:02 Filter is already there-color wheel unchanged 00:30:02 Received message from Master: op=Shutter serial=124882 00:30:02 Shutter LASER close 00:30:02 Received message from Camera: op=State serial=124884 00:30:02 GetSingleValue result=40 Value=cccccccc 00:30:02 SkyScan query 00:30:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:30:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:03 Parameters OK 00:30:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:03 Set A/D data flow result=40 00:30:03 Set A/D channel type result=40 00:30:03 Set A/D encoding result=40 00:30:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:03 Set channel filter=0.000000e+000 result=40 00:30:03 Config A/D Result=40 00:30:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:03 Get A/D filter: -9.255963e+061 result=40 00:30:03 Get A/D value=-858993460 result=40 00:30:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:03 Parameters OK 00:30:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:03 Set A/D data flow result=40 00:30:03 Set A/D channel type result=40 00:30:03 Set A/D encoding result=40 00:30:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:03 Set channel filter=0.000000e+000 result=40 00:30:03 Config A/D Result=40 00:30:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:03 Get A/D filter: -9.255963e+061 result=40 00:30:03 Get A/D value=-858993460 result=40 00:30:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:30:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:30:03 Aux= 00:30:03 Message to Camera, serial 124884 queued 00:30:40 Received message from Master: op=PointingHead serial=124897 00:30:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:30:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:30:40 Point started: ret=0 00:30:40 point_skyscan result=0 00:30:41 Check angles 00:30:41 SkyScan query 00:30:41 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.915<-13461 Statuses=0009 0009 00:30:41 Msec=0 True Az=153.165 Ze=-21.915 Az status=0009 Ze status=0009 00:30:41 Check angles 00:30:41 SkyScan query 00:30:42 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.465<-12031 Statuses=0009 0009 00:30:42 Msec=750 True Az=135.315 Ze=-0.465 Az status=0009 Ze status=0009 00:30:42 Check angles 00:30:42 SkyScan query 00:30:43 SkyScan query done: ret=0 az=117.795<-7853 ze=20.445<-10637 Statuses=0009 0009 00:30:43 Msec=1500 True Az=117.795 Ze=20.445 Az status=0009 Ze status=0009 00:30:43 Check angles 00:30:43 SkyScan query 00:30:43 SkyScan query done: ret=0 az=100.035<-6669 ze=41.895<-9207 Statuses=0009 0009 00:30:43 Msec=2250 True Az=100.035 Ze=41.895 Az status=0009 Ze status=0009 00:30:44 Check angles 00:30:44 SkyScan query 00:30:44 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 00:30:44 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 00:30:44 Check angles 00:30:44 SkyScan query 00:30:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:30:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:30:45 Message to Master queued w/err=0: serial=124897 error=0 00:30:50 Received message from Master: op=Filter serial=124898 00:30:50 Color wheel filter change from 0 to 0 00:30:50 FLIGetFilterPos err=0 currentPosition=0 00:30:50 FLIGetStepsRemaining err=0 RemainingSteps=0 00:30:50 Filter is already there-color wheel unchanged 00:30:50 Received message from Master: op=Shutter serial=124899 00:30:50 Shutter LASER close 00:30:50 Received message from Camera: op=State serial=124901 00:30:50 GetSingleValue result=40 Value=cccccccc 00:30:50 SkyScan query 00:30:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:30:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:51 Parameters OK 00:30:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:51 Set A/D data flow result=40 00:30:51 Set A/D channel type result=40 00:30:51 Set A/D encoding result=40 00:30:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:51 Set channel filter=0.000000e+000 result=40 00:30:51 Config A/D Result=40 00:30:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:51 Get A/D filter: -9.255963e+061 result=40 00:30:51 Get A/D value=-858993460 result=40 00:30:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:51 Parameters OK 00:30:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:51 Set A/D data flow result=40 00:30:51 Set A/D channel type result=40 00:30:51 Set A/D encoding result=40 00:30:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:51 Set channel filter=0.000000e+000 result=40 00:30:51 Config A/D Result=40 00:30:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:51 Get A/D filter: -9.255963e+061 result=40 00:30:51 Get A/D value=-858993460 result=40 00:30:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:30:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:30:51 Aux= 00:30:51 Message to Camera, serial 124901 queued 00:31:28 Received message from Master: op=PointingHead serial=124914 00:31:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:31:28 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:31:28 Point started: ret=0 00:31:28 point_skyscan result=0 00:31:29 Check angles 00:31:29 SkyScan query 00:31:29 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 00:31:29 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 00:31:29 Check angles 00:31:29 SkyScan query 00:31:30 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 00:31:30 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 00:31:30 Check angles 00:31:30 SkyScan query 00:31:31 SkyScan query done: ret=0 az=143.79<-9586 ze=38.505<-9433 Statuses=0009 0008 00:31:31 Msec=1500 True Az=143.79 Ze=38.505 Az status=0009 Ze status=0008 00:31:31 Check angles 00:31:31 SkyScan query 00:31:32 SkyScan query done: ret=0 az=161.115<-10741 ze=38.505<-9433 Statuses=0009 0008 00:31:32 Msec=2250 True Az=161.115 Ze=38.505 Az status=0009 Ze status=0008 00:31:32 Check angles 00:31:32 SkyScan query 00:31:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 00:31:32 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 00:31:32 Check angles 00:31:32 SkyScan query 00:31:33 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:31:33 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:31:33 Message to Master queued w/err=0: serial=124914 error=0 00:31:38 Received message from Master: op=Filter serial=124915 00:31:38 Color wheel filter change from 0 to 0 00:31:38 FLIGetFilterPos err=0 currentPosition=0 00:31:38 FLIGetStepsRemaining err=0 RemainingSteps=0 00:31:38 Filter is already there-color wheel unchanged 00:31:38 Received message from Master: op=Shutter serial=124916 00:31:38 Shutter LASER close 00:31:38 Received message from Camera: op=State serial=124918 00:31:38 GetSingleValue result=40 Value=cccccccc 00:31:38 SkyScan query 00:31:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:31:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:39 Parameters OK 00:31:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:39 Set A/D data flow result=40 00:31:39 Set A/D channel type result=40 00:31:39 Set A/D encoding result=40 00:31:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:39 Set channel filter=0.000000e+000 result=40 00:31:39 Config A/D Result=40 00:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:39 Get A/D filter: -9.255963e+061 result=40 00:31:39 Get A/D value=-858993460 result=40 00:31:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:39 Parameters OK 00:31:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:39 Set A/D data flow result=40 00:31:39 Set A/D channel type result=40 00:31:39 Set A/D encoding result=40 00:31:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:39 Set channel filter=0.000000e+000 result=40 00:31:39 Config A/D Result=40 00:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:39 Get A/D filter: -9.255963e+061 result=40 00:31:39 Get A/D value=-858993460 result=40 00:31:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:31:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:31:39 Aux= 00:31:39 Message to Camera, serial 124918 queued 00:32:16 Received message from Master: op=PointingHead serial=124931 00:32:16 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:32:16 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:32:16 Point started: ret=0 00:32:16 point_skyscan result=0 00:32:17 Check angles 00:32:17 SkyScan query 00:32:17 SkyScan query done: ret=0 az=153.165<-10211 ze=8.88<-11408 Statuses=0009 0009 00:32:17 Msec=0 True Az=153.165 Ze=8.88 Az status=0009 Ze status=0009 00:32:17 Check angles 00:32:17 SkyScan query 00:32:18 SkyScan query done: ret=0 az=135.72<-9048 ze=-12.12<-12808 Statuses=0009 0009 00:32:18 Msec=750 True Az=135.72 Ze=-12.12 Az status=0009 Ze status=0009 00:32:18 Check angles 00:32:18 SkyScan query 00:32:19 SkyScan query done: ret=0 az=118.17<-7878 ze=-33.045<-14203 Statuses=0009 0009 00:32:19 Msec=1500 True Az=118.17 Ze=-33.045 Az status=0009 Ze status=0009 00:32:19 Check angles 00:32:19 SkyScan query 00:32:20 SkyScan query done: ret=0 az=100.77<-6718 ze=-51.525<-15435 Statuses=0009 0009 00:32:20 Msec=2250 True Az=100.77 Ze=-51.525 Az status=0009 Ze status=0009 00:32:20 Check angles 00:32:20 SkyScan query 00:32:20 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:32:20 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:32:20 Check angles 00:32:20 SkyScan query 00:32:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:32:21 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:32:21 Message to Master queued w/err=0: serial=124931 error=0 00:32:26 Received message from Master: op=Filter serial=124932 00:32:26 Color wheel filter change from 0 to 0 00:32:26 FLIGetFilterPos err=0 currentPosition=0 00:32:26 FLIGetStepsRemaining err=0 RemainingSteps=0 00:32:26 Filter is already there-color wheel unchanged 00:32:26 Received message from Master: op=Shutter serial=124933 00:32:26 Shutter LASER close 00:32:26 Received message from Camera: op=State serial=124935 00:32:26 GetSingleValue result=40 Value=cccccccc 00:32:26 SkyScan query 00:32:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:32:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:27 Parameters OK 00:32:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:27 Set A/D data flow result=40 00:32:27 Set A/D channel type result=40 00:32:27 Set A/D encoding result=40 00:32:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:27 Set channel filter=0.000000e+000 result=40 00:32:27 Config A/D Result=40 00:32:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:27 Get A/D filter: -9.255963e+061 result=40 00:32:27 Get A/D value=-858993460 result=40 00:32:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:27 Parameters OK 00:32:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:27 Set A/D data flow result=40 00:32:27 Set A/D channel type result=40 00:32:27 Set A/D encoding result=40 00:32:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:27 Set channel filter=0.000000e+000 result=40 00:32:27 Config A/D Result=40 00:32:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:27 Get A/D filter: -9.255963e+061 result=40 00:32:27 Get A/D value=-858993460 result=40 00:32:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:32:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:32:27 Aux= 00:32:27 Message to Camera, serial 124935 queued 00:33:04 Received message from Master: op=PointingHead serial=124948 00:33:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:33:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:33:04 Point started: ret=0 00:33:04 point_skyscan result=0 00:33:05 Check angles 00:33:05 SkyScan query 00:33:05 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.645<-17443 Statuses=0009 0009 00:33:05 Msec=0 True Az=109.335 Ze=-81.645 Az status=0009 Ze status=0009 00:33:06 Check angles 00:33:06 SkyScan query 00:33:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 00:33:06 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 00:33:06 Check angles 00:33:06 SkyScan query 00:33:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.51<-20234 Statuses=0008 0009 00:33:07 Msec=1500 True Az=112.995 Ze=-123.51 Az status=0008 Ze status=0009 00:33:07 Check angles 00:33:07 SkyScan query 00:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.885<-21659 Statuses=0008 0009 00:33:08 Msec=2250 True Az=112.995 Ze=-144.885 Az status=0008 Ze status=0009 00:33:08 Check angles 00:33:08 SkyScan query 00:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.84<-23056 Statuses=0008 0009 00:33:08 Msec=3000 True Az=112.995 Ze=-165.84 Az status=0008 Ze status=0009 00:33:09 Check angles 00:33:09 SkyScan query 00:33:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:33:09 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:33:09 Message to Master queued w/err=0: serial=124948 error=0 00:33:14 Received message from Master: op=Filter serial=124949 00:33:14 Color wheel filter change from 0 to 0 00:33:14 FLIGetFilterPos err=0 currentPosition=0 00:33:14 FLIGetStepsRemaining err=0 RemainingSteps=0 00:33:14 Filter is already there-color wheel unchanged 00:33:14 Received message from Master: op=Shutter serial=124950 00:33:14 Shutter LASER open 00:33:14 Received message from Camera: op=State serial=124952 00:33:14 GetSingleValue result=40 Value=cccccccc 00:33:14 SkyScan query 00:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:33:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:15 Parameters OK 00:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:15 Set A/D data flow result=40 00:33:15 Set A/D channel type result=40 00:33:15 Set A/D encoding result=40 00:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:15 Set channel filter=0.000000e+000 result=40 00:33:15 Config A/D Result=40 00:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:15 Get A/D filter: -9.255963e+061 result=40 00:33:15 Get A/D value=-858993460 result=40 00:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:15 Parameters OK 00:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:15 Set A/D data flow result=40 00:33:15 Set A/D channel type result=40 00:33:15 Set A/D encoding result=40 00:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:15 Set channel filter=0.000000e+000 result=40 00:33:15 Config A/D Result=40 00:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:15 Get A/D filter: -9.255963e+061 result=40 00:33:15 Get A/D value=-858993460 result=40 00:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:33:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:33:15 Aux= 00:33:15 Message to Camera, serial 124952 queued 00:33:23 Received message from Master: op=Shutter serial=124962 00:33:23 Shutter LASER close 00:33:24 Received message from Master: op=PointingHead serial=124966 00:33:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:33:24 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:33:24 Point started: ret=0 00:33:24 point_skyscan result=0 00:33:25 Check angles 00:33:25 SkyScan query 00:33:26 SkyScan query done: ret=0 az=89.625<-5975 ze=157.02<-1532 Statuses=0009 0009 00:33:26 Msec=0 True Az=89.625 Ze=157.02 Az status=0009 Ze status=0009 00:33:26 Check angles 00:33:26 SkyScan query 00:33:26 SkyScan query done: ret=0 az=71.895<-4793 ze=135.54<-2964 Statuses=0009 0009 00:33:26 Msec=750 True Az=71.895 Ze=135.54 Az status=0009 Ze status=0009 00:33:27 Check angles 00:33:27 SkyScan query 00:33:27 SkyScan query done: ret=0 az=54.615<-3641 ze=114.645<-4357 Statuses=0009 0009 00:33:27 Msec=1500 True Az=54.615 Ze=114.645 Az status=0009 Ze status=0009 00:33:27 Check angles 00:33:27 SkyScan query 00:33:28 SkyScan query done: ret=0 az=40.935<-2729 ze=93.72<-5752 Statuses=0009 0009 00:33:28 Msec=2250 True Az=40.935 Ze=93.72 Az status=0009 Ze status=0009 00:33:28 Check angles 00:33:28 SkyScan query 00:33:29 SkyScan query done: ret=0 az=40.995<-2733 ze=72.75<-7150 Statuses=0008 0009 00:33:29 Msec=3000 True Az=40.995 Ze=72.75 Az status=0008 Ze status=0009 00:33:29 Check angles 00:33:29 SkyScan query 00:33:29 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 00:33:29 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 00:33:30 Check angles 00:33:30 SkyScan query 00:33:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:33:30 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:33:30 Message to Master queued w/err=0: serial=124966 error=0 00:33:35 Received message from Master: op=Filter serial=124967 00:33:35 Color wheel filter change from 0 to 0 00:33:35 FLIGetFilterPos err=0 currentPosition=0 00:33:35 FLIGetStepsRemaining err=0 RemainingSteps=0 00:33:35 Filter is already there-color wheel unchanged 00:33:35 Received message from Master: op=Shutter serial=124968 00:33:35 Shutter LASER close 00:33:35 Received message from Camera: op=State serial=124970 00:33:35 GetSingleValue result=40 Value=cccccccc 00:33:35 SkyScan query 00:33:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:33:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:36 Parameters OK 00:33:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:36 Set A/D data flow result=40 00:33:36 Set A/D channel type result=40 00:33:36 Set A/D encoding result=40 00:33:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:36 Set channel filter=0.000000e+000 result=40 00:33:36 Config A/D Result=40 00:33:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:36 Get A/D filter: -9.255963e+061 result=40 00:33:36 Get A/D value=-858993460 result=40 00:33:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:36 Parameters OK 00:33:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:36 Set A/D data flow result=40 00:33:36 Set A/D channel type result=40 00:33:36 Set A/D encoding result=40 00:33:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:36 Set channel filter=0.000000e+000 result=40 00:33:36 Config A/D Result=40 00:33:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:36 Get A/D filter: -9.255963e+061 result=40 00:33:36 Get A/D value=-858993460 result=40 00:33:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:33:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:33:36 Aux= 00:33:36 Message to Camera, serial 124970 queued 00:34:13 Received message from Master: op=PointingHead serial=124983 00:34:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:34:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:34:13 Point started: ret=0 00:34:13 point_skyscan result=0 00:34:14 Check angles 00:34:14 SkyScan query 00:34:15 SkyScan query done: ret=0 az=40.98<-2732 ze=21.93<-10538 Statuses=0008 0009 00:34:15 Msec=0 True Az=40.98 Ze=21.93 Az status=0008 Ze status=0009 00:34:15 Check angles 00:34:15 SkyScan query 00:34:15 SkyScan query done: ret=0 az=40.98<-2732 ze=1.005<-11933 Statuses=0008 0009 00:34:15 Msec=750 True Az=40.98 Ze=1.005 Az status=0008 Ze status=0009 00:34:16 Check angles 00:34:16 SkyScan query 00:34:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-19.98<-13332 Statuses=0008 0009 00:34:16 Msec=1500 True Az=40.995 Ze=-19.98 Az status=0008 Ze status=0009 00:34:16 Check angles 00:34:16 SkyScan query 00:34:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 00:34:17 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 00:34:17 Check angles 00:34:17 SkyScan query 00:34:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:34:18 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:34:18 Message to Master queued w/err=0: serial=124983 error=0 00:34:23 Received message from Master: op=Filter serial=124984 00:34:23 Color wheel filter change from 0 to 0 00:34:23 FLIGetFilterPos err=0 currentPosition=0 00:34:23 FLIGetStepsRemaining err=0 RemainingSteps=0 00:34:23 Filter is already there-color wheel unchanged 00:34:23 Received message from Master: op=Shutter serial=124985 00:34:23 Shutter LASER close 00:34:23 Received message from Camera: op=State serial=124987 00:34:23 GetSingleValue result=40 Value=cccccccc 00:34:23 SkyScan query 00:34:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:34:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:24 Parameters OK 00:34:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:24 Set A/D data flow result=40 00:34:24 Set A/D channel type result=40 00:34:24 Set A/D encoding result=40 00:34:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:24 Set channel filter=0.000000e+000 result=40 00:34:24 Config A/D Result=40 00:34:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:24 Get A/D filter: -9.255963e+061 result=40 00:34:24 Get A/D value=-858993460 result=40 00:34:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:24 Parameters OK 00:34:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:24 Set A/D data flow result=40 00:34:24 Set A/D channel type result=40 00:34:24 Set A/D encoding result=40 00:34:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:24 Set channel filter=0.000000e+000 result=40 00:34:24 Config A/D Result=40 00:34:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:24 Get A/D filter: -9.255963e+061 result=40 00:34:24 Get A/D value=-858993460 result=40 00:34:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:34:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:34:24 Aux= 00:34:24 Message to Camera, serial 124987 queued 00:35:00 Received message from Master: op=PointingHead serial=125000 00:35:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:35:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:35:01 Point started: ret=0 00:35:01 point_skyscan result=0 00:35:01 Check angles 00:35:01 SkyScan query 00:35:02 SkyScan query done: ret=0 az=64.305<-4287 ze=-68.64<-16576 Statuses=0009 0009 00:35:02 Msec=0 True Az=64.305 Ze=-68.64 Az status=0009 Ze status=0009 00:35:02 Check angles 00:35:02 SkyScan query 00:35:03 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.595<-17973 Statuses=0009 0009 00:35:03 Msec=750 True Az=81.645 Ze=-89.595 Az status=0009 Ze status=0009 00:35:03 Check angles 00:35:03 SkyScan query 00:35:04 SkyScan query done: ret=0 az=99.24<-6616 ze=-110.595<-19373 Statuses=0009 0009 00:35:04 Msec=1500 True Az=99.24 Ze=-110.595 Az status=0009 Ze status=0009 00:35:04 Check angles 00:35:04 SkyScan query 00:35:04 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.52<-20768 Statuses=0009 0009 00:35:04 Msec=2250 True Az=116.91 Ze=-131.52 Az status=0009 Ze status=0009 00:35:04 Check angles 00:35:04 SkyScan query 00:35:05 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 00:35:05 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 00:35:05 Check angles 00:35:05 SkyScan query 00:35:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:35:06 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:35:06 Message to Master queued w/err=0: serial=125000 error=0 00:35:11 Received message from Master: op=Filter serial=125001 00:35:11 Color wheel filter change from 0 to 0 00:35:11 FLIGetFilterPos err=0 currentPosition=0 00:35:11 FLIGetStepsRemaining err=0 RemainingSteps=0 00:35:11 Filter is already there-color wheel unchanged 00:35:11 Received message from Master: op=Shutter serial=125002 00:35:11 Shutter LASER close 00:35:11 Received message from Camera: op=State serial=125004 00:35:11 GetSingleValue result=40 Value=cccccccc 00:35:11 SkyScan query 00:35:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:35:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:12 Parameters OK 00:35:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:12 Set A/D data flow result=40 00:35:12 Set A/D channel type result=40 00:35:12 Set A/D encoding result=40 00:35:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:12 Set channel filter=0.000000e+000 result=40 00:35:12 Config A/D Result=40 00:35:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:12 Get A/D filter: -9.255963e+061 result=40 00:35:12 Get A/D value=-858993460 result=40 00:35:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:12 Parameters OK 00:35:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:12 Set A/D data flow result=40 00:35:12 Set A/D channel type result=40 00:35:12 Set A/D encoding result=40 00:35:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:12 Set channel filter=0.000000e+000 result=40 00:35:12 Config A/D Result=40 00:35:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:12 Get A/D filter: -9.255963e+061 result=40 00:35:12 Get A/D value=-858993460 result=40 00:35:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:12 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:35:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:35:12 Aux= 00:35:12 Message to Camera, serial 125004 queued 00:35:48 Received message from Master: op=PointingHead serial=125017 00:35:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:35:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:35:49 Point started: ret=0 00:35:49 point_skyscan result=0 00:35:50 Check angles 00:35:50 SkyScan query 00:35:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 00:35:50 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 00:35:50 Check angles 00:35:50 SkyScan query 00:35:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:35:51 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:35:51 Message to Master queued w/err=0: serial=125017 error=0 [UTC 2018-12-14 00:35:52] 00:35:56 Received message from Master: op=Filter serial=125018 00:35:56 Color wheel filter change from 0 to 0 00:35:56 FLIGetFilterPos err=0 currentPosition=0 00:35:56 FLIGetStepsRemaining err=0 RemainingSteps=0 00:35:56 Filter is already there-color wheel unchanged 00:35:56 Received message from Master: op=Shutter serial=125019 00:35:56 Shutter LASER open 00:35:56 Received message from Camera: op=State serial=125021 00:35:56 GetSingleValue result=40 Value=cccccccc 00:35:56 SkyScan query 00:35:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:35:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:57 Parameters OK 00:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:57 Set A/D data flow result=40 00:35:57 Set A/D channel type result=40 00:35:57 Set A/D encoding result=40 00:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:57 Set channel filter=0.000000e+000 result=40 00:35:57 Config A/D Result=40 00:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:57 Get A/D filter: -9.255963e+061 result=40 00:35:57 Get A/D value=-858993460 result=40 00:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:57 Parameters OK 00:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:57 Set A/D data flow result=40 00:35:57 Set A/D channel type result=40 00:35:57 Set A/D encoding result=40 00:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:57 Set channel filter=0.000000e+000 result=40 00:35:57 Config A/D Result=40 00:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:57 Get A/D filter: -9.255963e+061 result=40 00:35:57 Get A/D value=-858993460 result=40 00:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:35:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:35:57 Aux= 00:35:57 Message to Camera, serial 125021 queued 00:36:05 Received message from Master: op=Shutter serial=125031 00:36:05 Shutter LASER close 00:36:06 Received message from Master: op=PointingHead serial=125035 00:36:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:36:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:36:06 Point started: ret=0 00:36:06 point_skyscan result=0 00:36:07 Check angles 00:36:07 SkyScan query 00:36:07 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.98<-21532 Statuses=0009 0009 00:36:07 Msec=0 True Az=136.38 Ze=-142.98 Az status=0009 Ze status=0009 00:36:08 Check angles 00:36:08 SkyScan query 00:36:08 SkyScan query done: ret=0 az=154.245<-10283 ze=-121.59<-20106 Statuses=0009 0009 00:36:08 Msec=750 True Az=154.245 Ze=-121.59 Az status=0009 Ze status=0009 00:36:08 Check angles 00:36:08 SkyScan query 00:36:09 SkyScan query done: ret=0 az=171.645<-11443 ze=-100.56<-18704 Statuses=0009 0009 00:36:09 Msec=1500 True Az=171.645 Ze=-100.56 Az status=0009 Ze status=0009 00:36:09 Check angles 00:36:09 SkyScan query 00:36:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.695<-17313 Statuses=0008 0009 00:36:10 Msec=2250 True Az=176.01 Ze=-79.695 Az status=0008 Ze status=0009 00:36:10 Check angles 00:36:10 SkyScan query 00:36:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 00:36:10 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 00:36:11 Check angles 00:36:11 SkyScan query 00:36:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 00:36:11 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 00:36:11 Message to Master queued w/err=0: serial=125035 error=0 00:36:16 Received message from Master: op=Filter serial=125036 00:36:16 Color wheel filter change from 0 to 0 00:36:16 FLIGetFilterPos err=0 currentPosition=0 00:36:16 FLIGetStepsRemaining err=0 RemainingSteps=0 00:36:16 Filter is already there-color wheel unchanged 00:36:16 Received message from Master: op=Shutter serial=125037 00:36:16 Shutter LASER close 00:36:17 Received message from Camera: op=State serial=125039 00:36:17 GetSingleValue result=40 Value=cccccccc 00:36:17 SkyScan query 00:36:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:36:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:17 Parameters OK 00:36:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:17 Set A/D data flow result=40 00:36:17 Set A/D channel type result=40 00:36:17 Set A/D encoding result=40 00:36:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:17 Set channel filter=0.000000e+000 result=40 00:36:17 Config A/D Result=40 00:36:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:17 Get A/D filter: -9.255963e+061 result=40 00:36:17 Get A/D value=-858993460 result=40 00:36:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:17 Parameters OK 00:36:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:17 Set A/D data flow result=40 00:36:17 Set A/D channel type result=40 00:36:17 Set A/D encoding result=40 00:36:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:17 Set channel filter=0.000000e+000 result=40 00:36:17 Config A/D Result=40 00:36:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:17 Get A/D filter: -9.255963e+061 result=40 00:36:17 Get A/D value=-858993460 result=40 00:36:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:36:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:36:17 Aux= 00:36:17 Message to Camera, serial 125039 queued 00:36:54 Received message from Master: op=PointingHead serial=125052 00:36:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:36:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:36:54 Point started: ret=0 00:36:54 point_skyscan result=0 00:36:55 Check angles 00:36:55 SkyScan query 00:36:56 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.495<-13433 Statuses=0009 0009 00:36:56 Msec=0 True Az=152.76 Ze=-21.495 Az status=0009 Ze status=0009 00:36:56 Check angles 00:36:56 SkyScan query 00:36:56 SkyScan query done: ret=0 az=134.91<-8994 ze=-0.06<-12004 Statuses=0009 0009 00:36:56 Msec=750 True Az=134.91 Ze=-0.06 Az status=0009 Ze status=0009 00:36:57 Check angles 00:36:57 SkyScan query 00:36:57 SkyScan query done: ret=0 az=117.405<-7827 ze=20.865<-10609 Statuses=0009 0009 00:36:57 Msec=1500 True Az=117.405 Ze=20.865 Az status=0009 Ze status=0009 00:36:57 Check angles 00:36:57 SkyScan query 00:36:58 SkyScan query done: ret=0 az=99.66<-6644 ze=42.24<-9184 Statuses=0009 0009 00:36:58 Msec=2250 True Az=99.66 Ze=42.24 Az status=0009 Ze status=0009 00:36:58 Check angles 00:36:58 SkyScan query 00:36:59 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 00:36:59 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 00:36:59 Check angles 00:36:59 SkyScan query 00:36:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:36:59 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:36:59 Message to Master queued w/err=0: serial=125052 error=0 00:37:04 Received message from Master: op=Filter serial=125053 00:37:04 Color wheel filter change from 0 to 0 00:37:04 FLIGetFilterPos err=0 currentPosition=0 00:37:04 FLIGetStepsRemaining err=0 RemainingSteps=0 00:37:04 Filter is already there-color wheel unchanged 00:37:05 Received message from Master: op=Shutter serial=125054 00:37:05 Shutter LASER close 00:37:05 Received message from Camera: op=State serial=125056 00:37:05 GetSingleValue result=40 Value=cccccccc 00:37:05 SkyScan query 00:37:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:37:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:05 Parameters OK 00:37:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:05 Set A/D data flow result=40 00:37:05 Set A/D channel type result=40 00:37:05 Set A/D encoding result=40 00:37:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:05 Set channel filter=0.000000e+000 result=40 00:37:05 Config A/D Result=40 00:37:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:05 Get A/D filter: -9.255963e+061 result=40 00:37:05 Get A/D value=-858993460 result=40 00:37:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:05 Parameters OK 00:37:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:05 Set A/D data flow result=40 00:37:05 Set A/D channel type result=40 00:37:05 Set A/D encoding result=40 00:37:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:05 Set channel filter=0.000000e+000 result=40 00:37:05 Config A/D Result=40 00:37:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:05 Get A/D filter: -9.255963e+061 result=40 00:37:05 Get A/D value=-858993460 result=40 00:37:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:37:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:37:05 Aux= 00:37:05 Message to Camera, serial 125056 queued 00:37:42 Received message from Master: op=PointingHead serial=125069 00:37:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:37:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:37:42 Point started: ret=0 00:37:42 point_skyscan result=0 00:37:43 Check angles 00:37:43 SkyScan query 00:37:44 SkyScan query done: ret=0 az=108.675<-7245 ze=38.49<-9434 Statuses=0009 0008 00:37:44 Msec=0 True Az=108.675 Ze=38.49 Az status=0009 Ze status=0008 00:37:44 Check angles 00:37:44 SkyScan query 00:37:45 SkyScan query done: ret=0 az=126.21<-8414 ze=38.505<-9433 Statuses=0009 0008 00:37:45 Msec=750 True Az=126.21 Ze=38.505 Az status=0009 Ze status=0008 00:37:45 Check angles 00:37:45 SkyScan query 00:37:45 SkyScan query done: ret=0 az=143.655<-9577 ze=38.505<-9433 Statuses=0009 0008 00:37:45 Msec=1500 True Az=143.655 Ze=38.505 Az status=0009 Ze status=0008 00:37:45 Check angles 00:37:45 SkyScan query 00:37:46 SkyScan query done: ret=0 az=161.04<-10736 ze=38.505<-9433 Statuses=0009 0008 00:37:46 Msec=2250 True Az=161.04 Ze=38.505 Az status=0009 Ze status=0008 00:37:46 Check angles 00:37:46 SkyScan query 00:37:47 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:37:47 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:37:47 Check angles 00:37:47 SkyScan query 00:37:48 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:37:48 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:37:48 Message to Master queued w/err=0: serial=125069 error=0 00:37:53 Received message from Master: op=Filter serial=125070 00:37:53 Color wheel filter change from 0 to 0 00:37:53 FLIGetFilterPos err=0 currentPosition=0 00:37:53 FLIGetStepsRemaining err=0 RemainingSteps=0 00:37:53 Filter is already there-color wheel unchanged 00:37:53 Received message from Master: op=Shutter serial=125071 00:37:53 Shutter LASER close 00:37:53 Received message from Camera: op=State serial=125073 00:37:53 GetSingleValue result=40 Value=cccccccc 00:37:53 SkyScan query 00:37:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:37:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:53 Parameters OK 00:37:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:53 Set A/D data flow result=40 00:37:53 Set A/D channel type result=40 00:37:53 Set A/D encoding result=40 00:37:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:53 Set channel filter=0.000000e+000 result=40 00:37:53 Config A/D Result=40 00:37:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:53 Get A/D filter: -9.255963e+061 result=40 00:37:53 Get A/D value=-858993460 result=40 00:37:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:53 Parameters OK 00:37:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:53 Set A/D data flow result=40 00:37:53 Set A/D channel type result=40 00:37:53 Set A/D encoding result=40 00:37:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:53 Set channel filter=0.000000e+000 result=40 00:37:53 Config A/D Result=40 00:37:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:53 Get A/D filter: -9.255963e+061 result=40 00:37:53 Get A/D value=-858993460 result=40 00:37:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:37:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:37:53 Aux= 00:37:53 Message to Camera, serial 125073 queued 00:38:30 Received message from Master: op=PointingHead serial=125086 00:38:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:38:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:38:30 Point started: ret=0 00:38:30 point_skyscan result=0 00:38:31 Check angles 00:38:31 SkyScan query 00:38:32 SkyScan query done: ret=0 az=152.97<-10198 ze=8.67<-11422 Statuses=0009 0009 00:38:32 Msec=0 True Az=152.97 Ze=8.67 Az status=0009 Ze status=0009 00:38:32 Check angles 00:38:32 SkyScan query 00:38:33 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.27<-12818 Statuses=0009 0009 00:38:33 Msec=750 True Az=135.42 Ze=-12.27 Az status=0009 Ze status=0009 00:38:33 Check angles 00:38:33 SkyScan query 00:38:33 SkyScan query done: ret=0 az=117.63<-7842 ze=-33.645<-14243 Statuses=0009 0009 00:38:33 Msec=1500 True Az=117.63 Ze=-33.645 Az status=0009 Ze status=0009 00:38:33 Check angles 00:38:33 SkyScan query 00:38:34 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.555<-15437 Statuses=0009 0009 00:38:34 Msec=2250 True Az=100.245 Ze=-51.555 Az status=0009 Ze status=0009 00:38:34 Check angles 00:38:34 SkyScan query 00:38:35 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:38:35 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:38:35 Check angles 00:38:35 SkyScan query 00:38:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:38:36 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:38:36 Message to Master queued w/err=0: serial=125086 error=0 00:38:41 Received message from Master: op=Filter serial=125087 00:38:41 Color wheel filter change from 0 to 0 00:38:41 FLIGetFilterPos err=0 currentPosition=0 00:38:41 FLIGetStepsRemaining err=0 RemainingSteps=0 00:38:41 Filter is already there-color wheel unchanged 00:38:41 Received message from Master: op=Shutter serial=125088 00:38:41 Shutter LASER close 00:38:41 Received message from Camera: op=State serial=125090 00:38:41 GetSingleValue result=40 Value=cccccccc 00:38:41 SkyScan query 00:38:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:38:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:41 Parameters OK 00:38:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:41 Set A/D data flow result=40 00:38:41 Set A/D channel type result=40 00:38:41 Set A/D encoding result=40 00:38:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:41 Set channel filter=0.000000e+000 result=40 00:38:41 Config A/D Result=40 00:38:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:41 Get A/D filter: -9.255963e+061 result=40 00:38:41 Get A/D value=-858993460 result=40 00:38:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:41 Parameters OK 00:38:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:41 Set A/D data flow result=40 00:38:41 Set A/D channel type result=40 00:38:41 Set A/D encoding result=40 00:38:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:41 Set channel filter=0.000000e+000 result=40 00:38:41 Config A/D Result=40 00:38:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:41 Get A/D filter: -9.255963e+061 result=40 00:38:41 Get A/D value=-858993460 result=40 00:38:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:38:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:38:41 Aux= 00:38:41 Message to Camera, serial 125090 queued 00:39:17 Received message from Master: op=PointingHead serial=125102 00:39:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:39:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:39:18 Point started: ret=0 00:39:18 point_skyscan result=0 00:39:18 Check angles 00:39:18 SkyScan query 00:39:19 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.195<-17413 Statuses=0009 0009 00:39:19 Msec=0 True Az=108.93 Ze=-81.195 Az status=0009 Ze status=0009 00:39:19 Check angles 00:39:19 SkyScan query 00:39:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.6<-18840 Statuses=0008 0009 00:39:20 Msec=750 True Az=112.995 Ze=-102.6 Az status=0008 Ze status=0009 00:39:20 Check angles 00:39:20 SkyScan query 00:39:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.555<-20237 Statuses=0008 0009 00:39:20 Msec=1500 True Az=112.995 Ze=-123.555 Az status=0008 Ze status=0009 00:39:21 Check angles 00:39:21 SkyScan query 00:39:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 00:39:21 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 00:39:21 Check angles 00:39:21 SkyScan query 00:39:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.9<-23060 Statuses=0008 0009 00:39:22 Msec=3000 True Az=112.995 Ze=-165.9 Az status=0008 Ze status=0009 00:39:22 Check angles 00:39:22 SkyScan query 00:39:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:39:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:39:23 Message to Master queued w/err=0: serial=125102 error=0 00:39:28 Received message from Master: op=Filter serial=125103 00:39:28 Color wheel filter change from 0 to 0 00:39:28 FLIGetFilterPos err=0 currentPosition=0 00:39:28 FLIGetStepsRemaining err=0 RemainingSteps=0 00:39:28 Filter is already there-color wheel unchanged 00:39:28 Received message from Master: op=Shutter serial=125104 00:39:28 Shutter LASER open 00:39:28 Received message from Camera: op=State serial=125106 00:39:28 GetSingleValue result=40 Value=cccccccc 00:39:28 SkyScan query 00:39:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:39:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:29 Parameters OK 00:39:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:29 Set A/D data flow result=40 00:39:29 Set A/D channel type result=40 00:39:29 Set A/D encoding result=40 00:39:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:29 Set channel filter=0.000000e+000 result=40 00:39:29 Config A/D Result=40 00:39:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:29 Get A/D filter: -9.255963e+061 result=40 00:39:29 Get A/D value=-858993460 result=40 00:39:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:29 Parameters OK 00:39:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:29 Set A/D data flow result=40 00:39:29 Set A/D channel type result=40 00:39:29 Set A/D encoding result=40 00:39:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:29 Set channel filter=0.000000e+000 result=40 00:39:29 Config A/D Result=40 00:39:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:29 Get A/D filter: -9.255963e+061 result=40 00:39:29 Get A/D value=-858993460 result=40 00:39:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:39:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:39:29 Aux= 00:39:29 Message to Camera, serial 125106 queued 00:39:37 Received message from Master: op=Shutter serial=125116 00:39:37 Shutter LASER close 00:39:38 Received message from Master: op=PointingHead serial=125120 00:39:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:39:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:39:38 Point started: ret=0 00:39:38 point_skyscan result=0 00:39:39 Check angles 00:39:39 SkyScan query 00:39:39 SkyScan query done: ret=0 az=90.15<-6010 ze=157.5<-1500 Statuses=0009 0009 00:39:39 Msec=0 True Az=90.15 Ze=157.5 Az status=0009 Ze status=0009 00:39:39 Check angles 00:39:39 SkyScan query 00:39:40 SkyScan query done: ret=0 az=72.285<-4819 ze=136.095<-2927 Statuses=0009 0009 00:39:40 Msec=750 True Az=72.285 Ze=136.095 Az status=0009 Ze status=0009 00:39:40 Check angles 00:39:40 SkyScan query 00:39:41 SkyScan query done: ret=0 az=54.585<-3639 ze=114.675<-4355 Statuses=0009 0009 00:39:41 Msec=1500 True Az=54.585 Ze=114.675 Az status=0009 Ze status=0009 00:39:41 Check angles 00:39:41 SkyScan query 00:39:41 SkyScan query done: ret=0 az=41.01<-2734 ze=93.75<-5750 Statuses=0009 0009 00:39:41 Msec=2250 True Az=41.01 Ze=93.75 Az status=0009 Ze status=0009 00:39:42 Check angles 00:39:42 SkyScan query 00:39:42 SkyScan query done: ret=0 az=40.995<-2733 ze=72.765<-7149 Statuses=0008 0009 00:39:42 Msec=3000 True Az=40.995 Ze=72.765 Az status=0008 Ze status=0009 00:39:42 Check angles 00:39:42 SkyScan query 00:39:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 00:39:43 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 00:39:43 Check angles 00:39:43 SkyScan query 00:39:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:39:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:39:44 Message to Master queued w/err=0: serial=125120 error=0 00:39:49 Received message from Master: op=Filter serial=125121 00:39:49 Color wheel filter change from 0 to 0 00:39:49 FLIGetFilterPos err=0 currentPosition=0 00:39:49 FLIGetStepsRemaining err=0 RemainingSteps=0 00:39:49 Filter is already there-color wheel unchanged 00:39:49 Received message from Master: op=Shutter serial=125122 00:39:49 Shutter LASER close 00:39:49 Received message from Camera: op=State serial=125124 00:39:49 GetSingleValue result=40 Value=cccccccc 00:39:49 SkyScan query 00:39:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:39:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:50 Parameters OK 00:39:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:50 Set A/D data flow result=40 00:39:50 Set A/D channel type result=40 00:39:50 Set A/D encoding result=40 00:39:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:50 Set channel filter=0.000000e+000 result=40 00:39:50 Config A/D Result=40 00:39:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:50 Get A/D filter: -9.255963e+061 result=40 00:39:50 Get A/D value=-858993460 result=40 00:39:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:50 Parameters OK 00:39:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:50 Set A/D data flow result=40 00:39:50 Set A/D channel type result=40 00:39:50 Set A/D encoding result=40 00:39:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:50 Set channel filter=0.000000e+000 result=40 00:39:50 Config A/D Result=40 00:39:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:50 Get A/D filter: -9.255963e+061 result=40 00:39:50 Get A/D value=-858993460 result=40 00:39:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:39:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:39:50 Aux= 00:39:50 Message to Camera, serial 125124 queued 00:40:27 Received message from Master: op=PointingHead serial=125137 00:40:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:40:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:40:27 Point started: ret=0 00:40:27 point_skyscan result=0 00:40:28 Check angles 00:40:28 SkyScan query 00:40:28 SkyScan query done: ret=0 az=40.995<-2733 ze=21.585<-10561 Statuses=0008 0009 00:40:28 Msec=0 True Az=40.995 Ze=21.585 Az status=0008 Ze status=0009 00:40:28 Check angles 00:40:28 SkyScan query 00:40:29 SkyScan query done: ret=0 az=40.995<-2733 ze=0.63<-11958 Statuses=0008 0009 00:40:29 Msec=750 True Az=40.995 Ze=0.63 Az status=0008 Ze status=0009 00:40:29 Check angles 00:40:29 SkyScan query 00:40:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.34<-13356 Statuses=0008 0009 00:40:30 Msec=1500 True Az=40.995 Ze=-20.34 Az status=0008 Ze status=0009 00:40:30 Check angles 00:40:30 SkyScan query 00:40:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 00:40:31 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 00:40:31 Check angles 00:40:31 SkyScan query 00:40:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:40:31 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:40:31 Message to Master queued w/err=0: serial=125137 error=0 00:40:36 Received message from Master: op=Filter serial=125138 00:40:36 Color wheel filter change from 0 to 0 00:40:36 FLIGetFilterPos err=0 currentPosition=0 00:40:36 FLIGetStepsRemaining err=0 RemainingSteps=0 00:40:36 Filter is already there-color wheel unchanged 00:40:36 Received message from Master: op=Shutter serial=125139 00:40:36 Shutter LASER close 00:40:36 Received message from Camera: op=State serial=125141 00:40:36 GetSingleValue result=40 Value=cccccccc 00:40:36 SkyScan query 00:40:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:40:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:37 Parameters OK 00:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:37 Set A/D data flow result=40 00:40:37 Set A/D channel type result=40 00:40:37 Set A/D encoding result=40 00:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:37 Set channel filter=0.000000e+000 result=40 00:40:37 Config A/D Result=40 00:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:37 Get A/D filter: -9.255963e+061 result=40 00:40:37 Get A/D value=-858993460 result=40 00:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:37 Parameters OK 00:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:37 Set A/D data flow result=40 00:40:37 Set A/D channel type result=40 00:40:37 Set A/D encoding result=40 00:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:37 Set channel filter=0.000000e+000 result=40 00:40:37 Config A/D Result=40 00:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:37 Get A/D filter: -9.255963e+061 result=40 00:40:37 Get A/D value=-858993460 result=40 00:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:40:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:40:37 Aux= 00:40:37 Message to Camera, serial 125141 queued 00:41:14 Received message from Master: op=PointingHead serial=125154 00:41:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:41:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:41:14 Point started: ret=0 00:41:14 point_skyscan result=0 00:41:15 Check angles 00:41:15 SkyScan query 00:41:16 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.295<-16553 Statuses=0009 0009 00:41:16 Msec=0 True Az=64.23 Ze=-68.295 Az status=0009 Ze status=0009 00:41:16 Check angles 00:41:16 SkyScan query 00:41:16 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.265<-17951 Statuses=0009 0009 00:41:16 Msec=750 True Az=81.66 Ze=-89.265 Az status=0009 Ze status=0009 00:41:16 Check angles 00:41:16 SkyScan query 00:41:17 SkyScan query done: ret=0 az=99.51<-6634 ze=-110.67<-19378 Statuses=0009 0009 00:41:17 Msec=1500 True Az=99.51 Ze=-110.67 Az status=0009 Ze status=0009 00:41:17 Check angles 00:41:17 SkyScan query 00:41:18 SkyScan query done: ret=0 az=117.015<-7801 ze=-131.625<-20775 Statuses=0009 0009 00:41:18 Msec=2250 True Az=117.015 Ze=-131.625 Az status=0009 Ze status=0009 00:41:18 Check angles 00:41:18 SkyScan query 00:41:19 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.555<-21437 Statuses=0009 0008 00:41:19 Msec=3000 True Az=130.98 Ze=-141.555 Az status=0009 Ze status=0008 00:41:19 Check angles 00:41:19 SkyScan query 00:41:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 00:41:19 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 00:41:19 Message to Master queued w/err=0: serial=125154 error=0 00:41:24 Received message from Master: op=Filter serial=125155 00:41:24 Color wheel filter change from 0 to 0 00:41:24 FLIGetFilterPos err=0 currentPosition=0 00:41:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:41:24 Filter is already there-color wheel unchanged 00:41:24 Received message from Master: op=Shutter serial=125156 00:41:24 Shutter LASER close 00:41:25 Received message from Camera: op=State serial=125158 00:41:25 GetSingleValue result=40 Value=cccccccc 00:41:25 SkyScan query 00:41:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:41:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:25 Parameters OK 00:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:25 Set A/D data flow result=40 00:41:25 Set A/D channel type result=40 00:41:25 Set A/D encoding result=40 00:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:25 Set channel filter=0.000000e+000 result=40 00:41:25 Config A/D Result=40 00:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:25 Get A/D filter: -9.255963e+061 result=40 00:41:25 Get A/D value=-858993460 result=40 00:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:25 Parameters OK 00:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:25 Set A/D data flow result=40 00:41:25 Set A/D channel type result=40 00:41:25 Set A/D encoding result=40 00:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:25 Set channel filter=0.000000e+000 result=40 00:41:25 Config A/D Result=40 00:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:25 Get A/D filter: -9.255963e+061 result=40 00:41:25 Get A/D value=-858993460 result=40 00:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:41:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:41:25 Aux= 00:41:25 Message to Camera, serial 125158 queued 00:42:02 Received message from Master: op=PointingHead serial=125171 00:42:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:42:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:42:02 Point started: ret=0 00:42:02 point_skyscan result=0 00:42:03 Check angles 00:42:03 SkyScan query 00:42:04 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 00:42:04 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 00:42:04 Check angles 00:42:04 SkyScan query 00:42:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:42:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:42:04 Message to Master queued w/err=0: serial=125171 error=0 00:42:09 Received message from Master: op=Filter serial=125172 00:42:09 Color wheel filter change from 0 to 0 00:42:09 FLIGetFilterPos err=0 currentPosition=0 00:42:09 FLIGetStepsRemaining err=0 RemainingSteps=0 00:42:09 Filter is already there-color wheel unchanged 00:42:10 Received message from Master: op=Shutter serial=125173 00:42:10 Shutter LASER open 00:42:10 Received message from Camera: op=State serial=125175 00:42:10 GetSingleValue result=40 Value=cccccccc 00:42:10 SkyScan query 00:42:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:42:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:10 Parameters OK 00:42:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:10 Set A/D data flow result=40 00:42:10 Set A/D channel type result=40 00:42:10 Set A/D encoding result=40 00:42:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:10 Set channel filter=0.000000e+000 result=40 00:42:10 Config A/D Result=40 00:42:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:10 Get A/D filter: -9.255963e+061 result=40 00:42:10 Get A/D value=-858993460 result=40 00:42:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:10 Parameters OK 00:42:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:10 Set A/D data flow result=40 00:42:10 Set A/D channel type result=40 00:42:10 Set A/D encoding result=40 00:42:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:10 Set channel filter=0.000000e+000 result=40 00:42:10 Config A/D Result=40 00:42:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:10 Get A/D filter: -9.255963e+061 result=40 00:42:10 Get A/D value=-858993460 result=40 00:42:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:42:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:42:10 Aux= 00:42:10 Message to Camera, serial 125175 queued 00:42:19 Received message from Master: op=Shutter serial=125185 00:42:19 Shutter LASER close 00:42:19 Received message from Master: op=PointingHead serial=125189 00:42:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:42:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:42:20 Point started: ret=0 00:42:20 point_skyscan result=0 00:42:20 Check angles 00:42:20 SkyScan query 00:42:21 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.49<-21566 Statuses=0009 0009 00:42:21 Msec=0 True Az=135.75 Ze=-143.49 Az status=0009 Ze status=0009 00:42:21 Check angles 00:42:21 SkyScan query 00:42:22 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.535<-20169 Statuses=0009 0009 00:42:22 Msec=750 True Az=153.225 Ze=-122.535 Az status=0009 Ze status=0009 00:42:22 Check angles 00:42:22 SkyScan query 00:42:23 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.16<-18744 Statuses=0009 0009 00:42:23 Msec=1500 True Az=171.105 Ze=-101.16 Az status=0009 Ze status=0009 00:42:23 Check angles 00:42:23 SkyScan query 00:42:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.19<-17346 Statuses=0008 0009 00:42:23 Msec=2250 True Az=176.01 Ze=-80.19 Az status=0008 Ze status=0009 00:42:23 Check angles 00:42:23 SkyScan query 00:42:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.235<-15949 Statuses=0008 0009 00:42:24 Msec=3000 True Az=176.01 Ze=-59.235 Az status=0008 Ze status=0009 00:42:24 Check angles 00:42:24 SkyScan query 00:42:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:42:25 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:42:25 Message to Master queued w/err=0: serial=125189 error=0 00:42:30 Received message from Master: op=Filter serial=125190 00:42:30 Color wheel filter change from 0 to 0 00:42:30 FLIGetFilterPos err=0 currentPosition=0 00:42:30 FLIGetStepsRemaining err=0 RemainingSteps=0 00:42:30 Filter is already there-color wheel unchanged 00:42:30 Received message from Master: op=Shutter serial=125191 00:42:30 Shutter LASER close 00:42:30 Received message from Camera: op=State serial=125193 00:42:30 GetSingleValue result=40 Value=cccccccc 00:42:30 SkyScan query 00:42:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:42:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:31 Parameters OK 00:42:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:31 Set A/D data flow result=40 00:42:31 Set A/D channel type result=40 00:42:31 Set A/D encoding result=40 00:42:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:31 Set channel filter=0.000000e+000 result=40 00:42:31 Config A/D Result=40 00:42:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:31 Get A/D filter: -9.255963e+061 result=40 00:42:31 Get A/D value=-858993460 result=40 00:42:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:31 Parameters OK 00:42:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:31 Set A/D data flow result=40 00:42:31 Set A/D channel type result=40 00:42:31 Set A/D encoding result=40 00:42:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:31 Set channel filter=0.000000e+000 result=40 00:42:31 Config A/D Result=40 00:42:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:31 Get A/D filter: -9.255963e+061 result=40 00:42:31 Get A/D value=-858993460 result=40 00:42:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:42:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:42:31 Aux= 00:42:31 Message to Camera, serial 125193 queued 00:43:08 Received message from Master: op=PointingHead serial=125206 00:43:08 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:43:08 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:43:08 Point started: ret=0 00:43:08 point_skyscan result=0 00:43:09 Check angles 00:43:09 SkyScan query 00:43:09 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.24<-13416 Statuses=0009 0009 00:43:09 Msec=0 True Az=152.655 Ze=-21.24 Az status=0009 Ze status=0009 00:43:10 Check angles 00:43:10 SkyScan query 00:43:10 SkyScan query done: ret=0 az=134.745<-8983 ze=0.075<-11995 Statuses=0009 0009 00:43:10 Msec=750 True Az=134.745 Ze=0.075 Az status=0009 Ze status=0009 00:43:10 Check angles 00:43:10 SkyScan query 00:43:11 SkyScan query done: ret=0 az=117.285<-7819 ze=21.075<-10595 Statuses=0009 0009 00:43:11 Msec=1500 True Az=117.285 Ze=21.075 Az status=0009 Ze status=0009 00:43:11 Check angles 00:43:11 SkyScan query 00:43:12 SkyScan query done: ret=0 az=99.9<-6660 ze=42.03<-9198 Statuses=0009 0009 00:43:12 Msec=2250 True Az=99.9 Ze=42.03 Az status=0009 Ze status=0009 00:43:12 Check angles 00:43:12 SkyScan query 00:43:12 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 00:43:12 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 00:43:13 Check angles 00:43:13 SkyScan query 00:43:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:43:13 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:43:13 Message to Master queued w/err=0: serial=125206 error=0 00:43:18 Received message from Master: op=Filter serial=125207 00:43:18 Color wheel filter change from 0 to 0 00:43:18 FLIGetFilterPos err=0 currentPosition=0 00:43:18 FLIGetStepsRemaining err=0 RemainingSteps=0 00:43:18 Filter is already there-color wheel unchanged 00:43:18 Received message from Master: op=Shutter serial=125208 00:43:18 Shutter LASER close 00:43:18 Received message from Camera: op=State serial=125210 00:43:18 GetSingleValue result=40 Value=cccccccc 00:43:18 SkyScan query 00:43:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:43:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:19 Parameters OK 00:43:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:19 Set A/D data flow result=40 00:43:19 Set A/D channel type result=40 00:43:19 Set A/D encoding result=40 00:43:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:19 Set channel filter=0.000000e+000 result=40 00:43:19 Config A/D Result=40 00:43:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:19 Get A/D filter: -9.255963e+061 result=40 00:43:19 Get A/D value=-858993460 result=40 00:43:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:19 Parameters OK 00:43:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:19 Set A/D data flow result=40 00:43:19 Set A/D channel type result=40 00:43:19 Set A/D encoding result=40 00:43:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:19 Set channel filter=0.000000e+000 result=40 00:43:19 Config A/D Result=40 00:43:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:19 Get A/D filter: -9.255963e+061 result=40 00:43:19 Get A/D value=-858993460 result=40 00:43:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:43:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:43:19 Aux= 00:43:19 Message to Camera, serial 125210 queued 00:43:56 Received message from Master: op=PointingHead serial=125223 00:43:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:43:56 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:43:56 Point started: ret=0 00:43:56 point_skyscan result=0 00:43:57 Check angles 00:43:57 SkyScan query 00:43:57 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 00:43:57 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 00:43:58 Check angles 00:43:58 SkyScan query 00:43:58 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 00:43:58 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 00:43:58 Check angles 00:43:58 SkyScan query 00:43:59 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 00:43:59 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 00:43:59 Check angles 00:43:59 SkyScan query 00:44:00 SkyScan query done: ret=0 az=161.295<-10753 ze=38.505<-9433 Statuses=0009 0008 00:44:00 Msec=2250 True Az=161.295 Ze=38.505 Az status=0009 Ze status=0008 00:44:00 Check angles 00:44:00 SkyScan query 00:44:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 00:44:00 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 00:44:01 Check angles 00:44:01 SkyScan query 00:44:01 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:44:01 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:44:01 Message to Master queued w/err=0: serial=125223 error=0 00:44:06 Received message from Master: op=Filter serial=125224 00:44:06 Color wheel filter change from 0 to 0 00:44:06 FLIGetFilterPos err=0 currentPosition=0 00:44:06 FLIGetStepsRemaining err=0 RemainingSteps=0 00:44:06 Filter is already there-color wheel unchanged 00:44:06 Received message from Master: op=Shutter serial=125225 00:44:06 Shutter LASER close 00:44:06 Received message from Camera: op=State serial=125227 00:44:06 GetSingleValue result=40 Value=cccccccc 00:44:06 SkyScan query 00:44:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:44:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:07 Parameters OK 00:44:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:07 Set A/D data flow result=40 00:44:07 Set A/D channel type result=40 00:44:07 Set A/D encoding result=40 00:44:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:07 Set channel filter=0.000000e+000 result=40 00:44:07 Config A/D Result=40 00:44:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:07 Get A/D filter: -9.255963e+061 result=40 00:44:07 Get A/D value=-858993460 result=40 00:44:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:07 Parameters OK 00:44:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:07 Set A/D data flow result=40 00:44:07 Set A/D channel type result=40 00:44:07 Set A/D encoding result=40 00:44:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:07 Set channel filter=0.000000e+000 result=40 00:44:07 Config A/D Result=40 00:44:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:07 Get A/D filter: -9.255963e+061 result=40 00:44:07 Get A/D value=-858993460 result=40 00:44:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:44:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:44:07 Aux= 00:44:07 Message to Camera, serial 125227 queued 00:44:44 Received message from Master: op=PointingHead serial=125240 00:44:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:44:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:44:44 Point started: ret=0 00:44:44 point_skyscan result=0 00:44:45 Check angles 00:44:45 SkyScan query 00:44:45 SkyScan query done: ret=0 az=152.91<-10194 ze=8.52<-11432 Statuses=0009 0009 00:44:45 Msec=0 True Az=152.91 Ze=8.52 Az status=0009 Ze status=0009 00:44:46 Check angles 00:44:46 SkyScan query 00:44:46 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.42<-12828 Statuses=0009 0009 00:44:46 Msec=750 True Az=135.405 Ze=-12.42 Az status=0009 Ze status=0009 00:44:46 Check angles 00:44:46 SkyScan query 00:44:47 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.36<-14224 Statuses=0009 0009 00:44:47 Msec=1500 True Az=117.825 Ze=-33.36 Az status=0009 Ze status=0009 00:44:47 Check angles 00:44:47 SkyScan query 00:44:48 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.54<-15436 Statuses=0009 0009 00:44:48 Msec=2250 True Az=100.44 Ze=-51.54 Az status=0009 Ze status=0009 00:44:48 Check angles 00:44:48 SkyScan query 00:44:48 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:44:48 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:44:49 Check angles 00:44:49 SkyScan query 00:44:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:44:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:44:49 Message to Master queued w/err=0: serial=125240 error=0 00:44:54 Received message from Master: op=Filter serial=125241 00:44:54 Color wheel filter change from 0 to 0 00:44:54 FLIGetFilterPos err=0 currentPosition=0 00:44:54 FLIGetStepsRemaining err=0 RemainingSteps=0 00:44:54 Filter is already there-color wheel unchanged 00:44:54 Received message from Master: op=Shutter serial=125242 00:44:54 Shutter LASER close 00:44:54 Received message from Camera: op=State serial=125244 00:44:54 GetSingleValue result=40 Value=cccccccc 00:44:54 SkyScan query 00:44:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:44:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:55 Parameters OK 00:44:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:55 Set A/D data flow result=40 00:44:55 Set A/D channel type result=40 00:44:55 Set A/D encoding result=40 00:44:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:55 Set channel filter=0.000000e+000 result=40 00:44:55 Config A/D Result=40 00:44:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:55 Get A/D filter: -9.255963e+061 result=40 00:44:55 Get A/D value=-858993460 result=40 00:44:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:55 Parameters OK 00:44:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:55 Set A/D data flow result=40 00:44:55 Set A/D channel type result=40 00:44:55 Set A/D encoding result=40 00:44:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:55 Set channel filter=0.000000e+000 result=40 00:44:55 Config A/D Result=40 00:44:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:55 Get A/D filter: -9.255963e+061 result=40 00:44:55 Get A/D value=-858993460 result=40 00:44:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:44:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:44:55 Aux= 00:44:55 Message to Camera, serial 125244 queued 00:45:27 Received message from Master: op=Identify serial=125249 00:45:32 Received message from Master: op=PointingHead serial=125260 00:45:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:45:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:45:32 Point started: ret=0 00:45:32 point_skyscan result=0 00:45:33 Check angles 00:45:33 SkyScan query 00:45:33 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.03<-17402 Statuses=0009 0009 00:45:33 Msec=0 True Az=108.81 Ze=-81.03 Az status=0009 Ze status=0009 00:45:34 Check angles 00:45:34 SkyScan query 00:45:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 00:45:34 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 00:45:34 Check angles 00:45:34 SkyScan query 00:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.94<-20196 Statuses=0008 0009 00:45:35 Msec=1500 True Az=112.995 Ze=-122.94 Az status=0008 Ze status=0009 00:45:35 Check angles 00:45:35 SkyScan query 00:45:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 00:45:36 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 00:45:36 Check angles 00:45:36 SkyScan query 00:45:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 00:45:36 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 00:45:37 Check angles 00:45:37 SkyScan query 00:45:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:45:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:45:37 Message to Master queued w/err=0: serial=125260 error=0 00:45:42 Received message from Master: op=Filter serial=125261 00:45:42 Color wheel filter change from 0 to 0 00:45:42 FLIGetFilterPos err=0 currentPosition=0 00:45:42 FLIGetStepsRemaining err=0 RemainingSteps=0 00:45:42 Filter is already there-color wheel unchanged 00:45:42 Received message from Master: op=Shutter serial=125262 00:45:42 Shutter LASER open 00:45:43 Received message from Camera: op=State serial=125264 00:45:43 GetSingleValue result=40 Value=cccccccc 00:45:43 SkyScan query 00:45:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:45:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:43 Parameters OK 00:45:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 [UTC 2018-12-14 00:45:43] 00:45:43 Set A/D data flow result=40 00:45:43 Set A/D channel type result=40 00:45:43 Set A/D encoding result=40 00:45:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:43 Set channel filter=0.000000e+000 result=40 00:45:43 Config A/D Result=40 00:45:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:43 Get A/D filter: -9.255963e+061 result=40 00:45:43 Get A/D value=-858993460 result=40 00:45:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:43 Parameters OK 00:45:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:43 Set A/D data flow result=40 00:45:43 Set A/D channel type result=40 00:45:43 Set A/D encoding result=40 00:45:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:43 Set channel filter=0.000000e+000 result=40 00:45:43 Config A/D Result=40 00:45:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:43 Get A/D filter: -9.255963e+061 result=40 00:45:43 Get A/D value=-858993460 result=40 00:45:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:45:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:45:43 Aux= 00:45:43 Message to Camera, serial 125264 queued 00:45:52 Received message from Master: op=Shutter serial=125274 00:45:52 Shutter LASER close 00:45:52 Received message from Master: op=PointingHead serial=125278 00:45:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:45:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:45:52 Point started: ret=0 00:45:52 point_skyscan result=0 00:45:53 Check angles 00:45:53 SkyScan query 00:45:54 SkyScan query done: ret=0 az=89.415<-5961 ze=156.81<-1546 Statuses=0009 0009 00:45:54 Msec=0 True Az=89.415 Ze=156.81 Az status=0009 Ze status=0009 00:45:54 Check angles 00:45:54 SkyScan query 00:45:54 SkyScan query done: ret=0 az=71.565<-4771 ze=135.39<-2974 Statuses=0009 0009 00:45:54 Msec=750 True Az=71.565 Ze=135.39 Az status=0009 Ze status=0009 00:45:55 Check angles 00:45:55 SkyScan query 00:45:55 SkyScan query done: ret=0 az=54.225<-3615 ze=114.435<-4371 Statuses=0009 0009 00:45:55 Msec=1500 True Az=54.225 Ze=114.435 Az status=0009 Ze status=0009 00:45:55 Check angles 00:45:55 SkyScan query 00:45:56 SkyScan query done: ret=0 az=40.98<-2732 ze=93.495<-5767 Statuses=0009 0009 00:45:56 Msec=2250 True Az=40.98 Ze=93.495 Az status=0009 Ze status=0009 00:45:56 Check angles 00:45:56 SkyScan query 00:45:57 SkyScan query done: ret=0 az=40.995<-2733 ze=72.105<-7193 Statuses=0008 0009 00:45:57 Msec=3000 True Az=40.995 Ze=72.105 Az status=0008 Ze status=0009 00:45:57 Check angles 00:45:57 SkyScan query 00:45:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.08<-8528 Statuses=0008 0009 00:45:58 Msec=3750 True Az=40.995 Ze=52.08 Az status=0008 Ze status=0009 00:45:58 Check angles 00:45:58 SkyScan query 00:45:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:45:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:45:58 Message to Master queued w/err=0: serial=125278 error=0 00:46:03 Received message from Master: op=Filter serial=125279 00:46:03 Color wheel filter change from 0 to 0 00:46:03 FLIGetFilterPos err=0 currentPosition=0 00:46:03 FLIGetStepsRemaining err=0 RemainingSteps=0 00:46:03 Filter is already there-color wheel unchanged 00:46:03 Received message from Master: op=Shutter serial=125280 00:46:03 Shutter LASER close 00:46:04 Received message from Camera: op=State serial=125282 00:46:04 GetSingleValue result=40 Value=cccccccc 00:46:04 SkyScan query 00:46:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:46:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:04 Parameters OK 00:46:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:04 Set A/D data flow result=40 00:46:04 Set A/D channel type result=40 00:46:04 Set A/D encoding result=40 00:46:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:04 Set channel filter=0.000000e+000 result=40 00:46:04 Config A/D Result=40 00:46:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:04 Get A/D filter: -9.255963e+061 result=40 00:46:04 Get A/D value=-858993460 result=40 00:46:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:04 Parameters OK 00:46:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:04 Set A/D data flow result=40 00:46:04 Set A/D channel type result=40 00:46:04 Set A/D encoding result=40 00:46:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:04 Set channel filter=0.000000e+000 result=40 00:46:04 Config A/D Result=40 00:46:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:04 Get A/D filter: -9.255963e+061 result=40 00:46:04 Get A/D value=-858993460 result=40 00:46:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:46:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:46:04 Aux= 00:46:04 Message to Camera, serial 125282 queued 00:46:41 Received message from Master: op=PointingHead serial=125295 00:46:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:46:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:46:41 Point started: ret=0 00:46:41 point_skyscan result=0 00:46:42 Check angles 00:46:42 SkyScan query 00:46:43 SkyScan query done: ret=0 az=40.995<-2733 ze=21.885<-10541 Statuses=0008 0009 00:46:43 Msec=0 True Az=40.995 Ze=21.885 Az status=0008 Ze status=0009 00:46:43 Check angles 00:46:43 SkyScan query 00:46:44 SkyScan query done: ret=0 az=40.98<-2732 ze=0.915<-11939 Statuses=0008 0009 00:46:44 Msec=750 True Az=40.98 Ze=0.915 Az status=0008 Ze status=0009 00:46:44 Check angles 00:46:44 SkyScan query 00:46:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.04<-13336 Statuses=0008 0009 00:46:44 Msec=1500 True Az=40.995 Ze=-20.04 Az status=0008 Ze status=0009 00:46:44 Check angles 00:46:44 SkyScan query 00:46:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.52<-14568 Statuses=0008 0009 00:46:45 Msec=2250 True Az=40.995 Ze=-38.52 Az status=0008 Ze status=0009 00:46:45 Check angles 00:46:45 SkyScan query 00:46:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:46:46 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:46:46 Message to Master queued w/err=0: serial=125295 error=0 00:46:51 Received message from Master: op=Filter serial=125296 00:46:51 Color wheel filter change from 0 to 0 00:46:51 FLIGetFilterPos err=0 currentPosition=0 00:46:51 FLIGetStepsRemaining err=0 RemainingSteps=0 00:46:51 Filter is already there-color wheel unchanged 00:46:51 Received message from Master: op=Shutter serial=125297 00:46:51 Shutter LASER close 00:46:51 Received message from Camera: op=State serial=125299 00:46:51 GetSingleValue result=40 Value=cccccccc 00:46:51 SkyScan query 00:46:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:46:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:52 Parameters OK 00:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:52 Set A/D data flow result=40 00:46:52 Set A/D channel type result=40 00:46:52 Set A/D encoding result=40 00:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:52 Set channel filter=0.000000e+000 result=40 00:46:52 Config A/D Result=40 00:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:52 Get A/D filter: -9.255963e+061 result=40 00:46:52 Get A/D value=-858993460 result=40 00:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:52 Parameters OK 00:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:52 Set A/D data flow result=40 00:46:52 Set A/D channel type result=40 00:46:52 Set A/D encoding result=40 00:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:52 Set channel filter=0.000000e+000 result=40 00:46:52 Config A/D Result=40 00:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:52 Get A/D filter: -9.255963e+061 result=40 00:46:52 Get A/D value=-858993460 result=40 00:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:46:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:46:52 Aux= 00:46:52 Message to Camera, serial 125299 queued 00:47:28 Received message from Master: op=PointingHead serial=125312 00:47:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:47:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:47:29 Point started: ret=0 00:47:29 point_skyscan result=0 00:47:30 Check angles 00:47:30 SkyScan query 00:47:30 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.235<-16549 Statuses=0009 0009 00:47:30 Msec=0 True Az=64.005 Ze=-68.235 Az status=0009 Ze status=0009 00:47:30 Check angles 00:47:30 SkyScan query 00:47:31 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.64<-17976 Statuses=0009 0009 00:47:31 Msec=750 True Az=81.795 Ze=-89.64 Az status=0009 Ze status=0009 00:47:31 Check angles 00:47:31 SkyScan query 00:47:32 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.61<-19374 Statuses=0009 0009 00:47:32 Msec=1500 True Az=99.405 Ze=-110.61 Az status=0009 Ze status=0009 00:47:32 Check angles 00:47:32 SkyScan query 00:47:32 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.55<-20770 Statuses=0009 0009 00:47:32 Msec=2250 True Az=116.895 Ze=-131.55 Az status=0009 Ze status=0009 00:47:33 Check angles 00:47:33 SkyScan query 00:47:33 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.555<-21437 Statuses=0009 0008 00:47:33 Msec=3000 True Az=131.13 Ze=-141.555 Az status=0009 Ze status=0008 00:47:33 Check angles 00:47:33 SkyScan query 00:47:34 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 00:47:34 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 00:47:34 Message to Master queued w/err=0: serial=125312 error=0 00:47:39 Received message from Master: op=Filter serial=125313 00:47:39 Color wheel filter change from 0 to 0 00:47:39 FLIGetFilterPos err=0 currentPosition=0 00:47:39 FLIGetStepsRemaining err=0 RemainingSteps=0 00:47:39 Filter is already there-color wheel unchanged 00:47:39 Received message from Master: op=Shutter serial=125314 00:47:39 Shutter LASER close 00:47:39 Received message from Camera: op=State serial=125316 00:47:39 GetSingleValue result=40 Value=cccccccc 00:47:39 SkyScan query 00:47:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:47:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:40 Parameters OK 00:47:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:40 Set A/D data flow result=40 00:47:40 Set A/D channel type result=40 00:47:40 Set A/D encoding result=40 00:47:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:40 Set channel filter=0.000000e+000 result=40 00:47:40 Config A/D Result=40 00:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:40 Get A/D filter: -9.255963e+061 result=40 00:47:40 Get A/D value=-858993460 result=40 00:47:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:40 Parameters OK 00:47:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:40 Set A/D data flow result=40 00:47:40 Set A/D channel type result=40 00:47:40 Set A/D encoding result=40 00:47:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:40 Set channel filter=0.000000e+000 result=40 00:47:40 Config A/D Result=40 00:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:40 Get A/D filter: -9.255963e+061 result=40 00:47:40 Get A/D value=-858993460 result=40 00:47:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:47:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:47:40 Aux= 00:47:40 Message to Camera, serial 125316 queued 00:48:16 Received message from Master: op=PointingHead serial=125328 00:48:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:48:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:48:16 Point started: ret=0 00:48:16 point_skyscan result=0 00:48:17 Check angles 00:48:17 SkyScan query 00:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0009 0009 00:48:17 Msec=0 True Az=112.995 Ze=-170.895 Az status=0009 Ze status=0009 00:48:17 Check angles 00:48:17 SkyScan query 00:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:48:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:48:18 Message to Master queued w/err=0: serial=125328 error=0 00:48:23 Received message from Master: op=Filter serial=125329 00:48:23 Color wheel filter change from 0 to 0 00:48:23 FLIGetFilterPos err=0 currentPosition=0 00:48:23 FLIGetStepsRemaining err=0 RemainingSteps=0 00:48:23 Filter is already there-color wheel unchanged 00:48:23 Received message from Master: op=Shutter serial=125330 00:48:23 Shutter LASER open 00:48:23 Received message from Camera: op=State serial=125332 00:48:23 GetSingleValue result=40 Value=cccccccc 00:48:23 SkyScan query 00:48:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:48:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:24 Parameters OK 00:48:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:24 Set A/D data flow result=40 00:48:24 Set A/D channel type result=40 00:48:24 Set A/D encoding result=40 00:48:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:24 Set channel filter=0.000000e+000 result=40 00:48:24 Config A/D Result=40 00:48:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:24 Get A/D filter: -9.255963e+061 result=40 00:48:24 Get A/D value=-858993460 result=40 00:48:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:24 Parameters OK 00:48:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:24 Set A/D data flow result=40 00:48:24 Set A/D channel type result=40 00:48:24 Set A/D encoding result=40 00:48:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:24 Set channel filter=0.000000e+000 result=40 00:48:24 Config A/D Result=40 00:48:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:24 Get A/D filter: -9.255963e+061 result=40 00:48:24 Get A/D value=-858993460 result=40 00:48:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:48:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:48:24 Aux= 00:48:24 Message to Camera, serial 125332 queued 00:48:32 Received message from Master: op=Shutter serial=125342 00:48:32 Shutter LASER close 00:48:33 Received message from Master: op=PointingHead serial=125346 00:48:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:48:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:48:33 Point started: ret=0 00:48:33 point_skyscan result=0 00:48:34 Check angles 00:48:34 SkyScan query 00:48:35 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.145<-21543 Statuses=0009 0009 00:48:35 Msec=0 True Az=136.17 Ze=-143.145 Az status=0009 Ze status=0009 00:48:35 Check angles 00:48:35 SkyScan query 00:48:35 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.055<-20137 Statuses=0009 0009 00:48:35 Msec=750 True Az=153.555 Ze=-122.055 Az status=0009 Ze status=0009 00:48:36 Check angles 00:48:36 SkyScan query 00:48:36 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.28<-18752 Statuses=0009 0009 00:48:36 Msec=1500 True Az=171.075 Ze=-101.28 Az status=0009 Ze status=0009 00:48:36 Check angles 00:48:36 SkyScan query 00:48:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.295<-17353 Statuses=0008 0009 00:48:37 Msec=2250 True Az=176.01 Ze=-80.295 Az status=0008 Ze status=0009 00:48:37 Check angles 00:48:37 SkyScan query 00:48:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.355<-15957 Statuses=0008 0009 00:48:38 Msec=3000 True Az=176.01 Ze=-59.355 Az status=0008 Ze status=0009 00:48:38 Check angles 00:48:38 SkyScan query 00:48:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:48:38 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:48:38 Message to Master queued w/err=0: serial=125346 error=0 00:48:43 Received message from Master: op=Filter serial=125347 00:48:43 Color wheel filter change from 0 to 0 00:48:43 FLIGetFilterPos err=0 currentPosition=0 00:48:43 FLIGetStepsRemaining err=0 RemainingSteps=0 00:48:43 Filter is already there-color wheel unchanged 00:48:44 Received message from Master: op=Shutter serial=125348 00:48:44 Shutter LASER close 00:48:44 Received message from Camera: op=State serial=125350 00:48:44 GetSingleValue result=40 Value=cccccccc 00:48:44 SkyScan query 00:48:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:48:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:44 Parameters OK 00:48:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:44 Set A/D data flow result=40 00:48:44 Set A/D channel type result=40 00:48:44 Set A/D encoding result=40 00:48:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:44 Set channel filter=0.000000e+000 result=40 00:48:44 Config A/D Result=40 00:48:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:44 Get A/D filter: -9.255963e+061 result=40 00:48:44 Get A/D value=-858993460 result=40 00:48:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:44 Parameters OK 00:48:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:44 Set A/D data flow result=40 00:48:44 Set A/D channel type result=40 00:48:44 Set A/D encoding result=40 00:48:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:44 Set channel filter=0.000000e+000 result=40 00:48:44 Config A/D Result=40 00:48:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:44 Get A/D filter: -9.255963e+061 result=40 00:48:44 Get A/D value=-858993460 result=40 00:48:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:48:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:48:44 Aux= 00:48:44 Message to Camera, serial 125350 queued 00:49:21 Received message from Master: op=PointingHead serial=125363 00:49:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:49:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:49:21 Point started: ret=0 00:49:21 point_skyscan result=0 00:49:22 Check angles 00:49:22 SkyScan query 00:49:23 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.915<-13461 Statuses=0009 0009 00:49:23 Msec=0 True Az=153.12 Ze=-21.915 Az status=0009 Ze status=0009 00:49:23 Check angles 00:49:23 SkyScan query 00:49:24 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.9<-12060 Statuses=0009 0009 00:49:24 Msec=750 True Az=135.675 Ze=-0.9 Az status=0009 Ze status=0009 00:49:24 Check angles 00:49:24 SkyScan query 00:49:24 SkyScan query done: ret=0 az=118.095<-7873 ze=20.025<-10665 Statuses=0009 0009 00:49:24 Msec=1500 True Az=118.095 Ze=20.025 Az status=0009 Ze status=0009 00:49:24 Check angles 00:49:24 SkyScan query 00:49:25 SkyScan query done: ret=0 az=100.725<-6715 ze=41.01<-9266 Statuses=0009 0009 00:49:25 Msec=2250 True Az=100.725 Ze=41.01 Az status=0009 Ze status=0009 00:49:25 Check angles 00:49:25 SkyScan query 00:49:26 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 00:49:26 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 00:49:26 Check angles 00:49:26 SkyScan query 00:49:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:49:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:49:27 Message to Master queued w/err=0: serial=125363 error=0 00:49:32 Received message from Master: op=Filter serial=125364 00:49:32 Color wheel filter change from 0 to 0 00:49:32 FLIGetFilterPos err=0 currentPosition=0 00:49:32 FLIGetStepsRemaining err=0 RemainingSteps=0 00:49:32 Filter is already there-color wheel unchanged 00:49:32 Received message from Master: op=Shutter serial=125365 00:49:32 Shutter LASER close 00:49:32 Received message from Camera: op=State serial=125367 00:49:32 GetSingleValue result=40 Value=cccccccc 00:49:32 SkyScan query 00:49:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:49:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:32 Parameters OK 00:49:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:32 Set A/D data flow result=40 00:49:32 Set A/D channel type result=40 00:49:32 Set A/D encoding result=40 00:49:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:32 Set channel filter=0.000000e+000 result=40 00:49:32 Config A/D Result=40 00:49:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:32 Get A/D filter: -9.255963e+061 result=40 00:49:32 Get A/D value=-858993460 result=40 00:49:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:32 Parameters OK 00:49:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:32 Set A/D data flow result=40 00:49:32 Set A/D channel type result=40 00:49:32 Set A/D encoding result=40 00:49:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:32 Set channel filter=0.000000e+000 result=40 00:49:32 Config A/D Result=40 00:49:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:32 Get A/D filter: -9.255963e+061 result=40 00:49:32 Get A/D value=-858993460 result=40 00:49:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:49:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:49:32 Aux= 00:49:32 Message to Camera, serial 125367 queued 00:50:09 Received message from Master: op=PointingHead serial=125380 00:50:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:50:09 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:50:09 Point started: ret=0 00:50:09 point_skyscan result=0 00:50:10 Check angles 00:50:10 SkyScan query 00:50:11 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 00:50:11 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 00:50:11 Check angles 00:50:11 SkyScan query 00:50:12 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 00:50:12 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 00:50:12 Check angles 00:50:12 SkyScan query 00:50:12 SkyScan query done: ret=0 az=144.09<-9606 ze=38.505<-9433 Statuses=0009 0008 00:50:12 Msec=1500 True Az=144.09 Ze=38.505 Az status=0009 Ze status=0008 00:50:12 Check angles 00:50:12 SkyScan query 00:50:13 SkyScan query done: ret=0 az=161.49<-10766 ze=38.505<-9433 Statuses=0009 0008 00:50:13 Msec=2250 True Az=161.49 Ze=38.505 Az status=0009 Ze status=0008 00:50:13 Check angles 00:50:13 SkyScan query 00:50:14 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:50:14 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:50:14 Check angles 00:50:14 SkyScan query 00:50:15 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0008 0008 00:50:15 Msec=3750 True Az=176.025 Ze=38.505 Az status=0008 Ze status=0008 00:50:15 Message to Master queued w/err=0: serial=125380 error=0 00:50:20 Received message from Master: op=Filter serial=125381 00:50:20 Color wheel filter change from 0 to 0 00:50:20 FLIGetFilterPos err=0 currentPosition=0 00:50:20 FLIGetStepsRemaining err=0 RemainingSteps=0 00:50:20 Filter is already there-color wheel unchanged 00:50:20 Received message from Master: op=Shutter serial=125382 00:50:20 Shutter LASER close 00:50:20 Received message from Camera: op=State serial=125384 00:50:20 GetSingleValue result=40 Value=cccccccc 00:50:20 SkyScan query 00:50:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:50:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:20 Parameters OK 00:50:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:20 Set A/D data flow result=40 00:50:20 Set A/D channel type result=40 00:50:20 Set A/D encoding result=40 00:50:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:20 Set channel filter=0.000000e+000 result=40 00:50:20 Config A/D Result=40 00:50:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:20 Get A/D filter: -9.255963e+061 result=40 00:50:20 Get A/D value=-858993460 result=40 00:50:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:20 Parameters OK 00:50:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:20 Set A/D data flow result=40 00:50:20 Set A/D channel type result=40 00:50:20 Set A/D encoding result=40 00:50:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:20 Set channel filter=0.000000e+000 result=40 00:50:20 Config A/D Result=40 00:50:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:20 Get A/D filter: -9.255963e+061 result=40 00:50:20 Get A/D value=-858993460 result=40 00:50:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:50:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:50:20 Aux= 00:50:20 Message to Camera, serial 125384 queued 00:50:57 Received message from Master: op=PointingHead serial=125397 00:50:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:50:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:50:58 Point started: ret=0 00:50:58 point_skyscan result=0 00:50:58 Check angles 00:50:58 SkyScan query 00:50:59 SkyScan query done: ret=0 az=152.655<-10177 ze=8.235<-11451 Statuses=0009 0009 00:50:59 Msec=0 True Az=152.655 Ze=8.235 Az status=0009 Ze status=0009 00:50:59 Check angles 00:50:59 SkyScan query 00:51:00 SkyScan query done: ret=0 az=135.09<-9006 ze=-12.69<-12846 Statuses=0009 0009 00:51:00 Msec=750 True Az=135.09 Ze=-12.69 Az status=0009 Ze status=0009 00:51:00 Check angles 00:51:00 SkyScan query 00:51:00 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.645<-14243 Statuses=0009 0009 00:51:00 Msec=1500 True Az=117.585 Ze=-33.645 Az status=0009 Ze status=0009 00:51:01 Check angles 00:51:01 SkyScan query 00:51:01 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.555<-15437 Statuses=0009 0009 00:51:01 Msec=2250 True Az=100.29 Ze=-51.555 Az status=0009 Ze status=0009 00:51:01 Check angles 00:51:01 SkyScan query 00:51:02 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:51:02 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:51:02 Check angles 00:51:02 SkyScan query 00:51:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:51:03 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:51:03 Message to Master queued w/err=0: serial=125397 error=0 00:51:08 Received message from Master: op=Filter serial=125398 00:51:08 Color wheel filter change from 0 to 0 00:51:08 FLIGetFilterPos err=0 currentPosition=0 00:51:08 FLIGetStepsRemaining err=0 RemainingSteps=0 00:51:08 Filter is already there-color wheel unchanged 00:51:08 Received message from Master: op=Shutter serial=125399 00:51:08 Shutter LASER close 00:51:08 Received message from Camera: op=State serial=125401 00:51:08 GetSingleValue result=40 Value=cccccccc 00:51:08 SkyScan query 00:51:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:51:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:08 Parameters OK 00:51:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:08 Set A/D data flow result=40 00:51:08 Set A/D channel type result=40 00:51:08 Set A/D encoding result=40 00:51:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:08 Set channel filter=0.000000e+000 result=40 00:51:08 Config A/D Result=40 00:51:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:08 Get A/D filter: -9.255963e+061 result=40 00:51:08 Get A/D value=-858993460 result=40 00:51:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:08 Parameters OK 00:51:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:08 Set A/D data flow result=40 00:51:08 Set A/D channel type result=40 00:51:08 Set A/D encoding result=40 00:51:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:08 Set channel filter=0.000000e+000 result=40 00:51:08 Config A/D Result=40 00:51:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:08 Get A/D filter: -9.255963e+061 result=40 00:51:08 Get A/D value=-858993460 result=40 00:51:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:51:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:51:08 Aux= 00:51:08 Message to Camera, serial 125401 queued 00:51:45 Received message from Master: op=PointingHead serial=125414 00:51:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:51:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:51:46 Point started: ret=0 00:51:46 point_skyscan result=0 00:51:46 Check angles 00:51:46 SkyScan query 00:51:47 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.6<-17440 Statuses=0009 0009 00:51:47 Msec=0 True Az=109.335 Ze=-81.6 Az status=0009 Ze status=0009 00:51:47 Check angles 00:51:47 SkyScan query 00:51:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.57<-18838 Statuses=0008 0009 00:51:48 Msec=750 True Az=112.995 Ze=-102.57 Az status=0008 Ze status=0009 00:51:48 Check angles 00:51:48 SkyScan query 00:51:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.96<-20264 Statuses=0008 0009 00:51:48 Msec=1500 True Az=112.995 Ze=-123.96 Az status=0008 Ze status=0009 00:51:49 Check angles 00:51:49 SkyScan query 00:51:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.335<-21689 Statuses=0008 0009 00:51:49 Msec=2250 True Az=112.995 Ze=-145.335 Az status=0008 Ze status=0009 00:51:49 Check angles 00:51:49 SkyScan query 00:51:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.29<-23086 Statuses=0008 0009 00:51:50 Msec=3000 True Az=112.995 Ze=-166.29 Az status=0008 Ze status=0009 00:51:50 Check angles 00:51:50 SkyScan query 00:51:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:51:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:51:51 Message to Master queued w/err=0: serial=125414 error=0 00:51:56 Received message from Master: op=Filter serial=125415 00:51:56 Color wheel filter change from 0 to 0 00:51:56 FLIGetFilterPos err=0 currentPosition=0 00:51:56 FLIGetStepsRemaining err=0 RemainingSteps=0 00:51:56 Filter is already there-color wheel unchanged 00:51:56 Received message from Master: op=Shutter serial=125416 00:51:56 Shutter LASER open 00:51:56 Received message from Camera: op=State serial=125418 00:51:56 GetSingleValue result=40 Value=cccccccc 00:51:56 SkyScan query 00:51:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:51:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:57 Parameters OK 00:51:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:57 Set A/D data flow result=40 00:51:57 Set A/D channel type result=40 00:51:57 Set A/D encoding result=40 00:51:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:57 Set channel filter=0.000000e+000 result=40 00:51:57 Config A/D Result=40 00:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:57 Get A/D filter: -9.255963e+061 result=40 00:51:57 Get A/D value=-858993460 result=40 00:51:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:57 Parameters OK 00:51:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:57 Set A/D data flow result=40 00:51:57 Set A/D channel type result=40 00:51:57 Set A/D encoding result=40 00:51:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:57 Set channel filter=0.000000e+000 result=40 00:51:57 Config A/D Result=40 00:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:57 Get A/D filter: -9.255963e+061 result=40 00:51:57 Get A/D value=-858993460 result=40 00:51:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:51:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:51:57 Aux= 00:51:57 Message to Camera, serial 125418 queued 00:52:05 Received message from Master: op=Shutter serial=125428 00:52:05 Shutter LASER close 00:52:06 Received message from Master: op=PointingHead serial=125432 00:52:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:52:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:52:06 Point started: ret=0 00:52:06 point_skyscan result=0 00:52:07 Check angles 00:52:07 SkyScan query 00:52:07 SkyScan query done: ret=0 az=89.835<-5989 ze=157.305<-1513 Statuses=0009 0009 00:52:07 Msec=0 True Az=89.835 Ze=157.305 Az status=0009 Ze status=0009 00:52:07 Check angles 00:52:07 SkyScan query 00:52:08 SkyScan query done: ret=0 az=72.435<-4829 ze=136.35<-2910 Statuses=0009 0009 00:52:08 Msec=750 True Az=72.435 Ze=136.35 Az status=0009 Ze status=0009 00:52:08 Check angles 00:52:08 SkyScan query 00:52:09 SkyScan query done: ret=0 az=54.93<-3662 ze=115.425<-4305 Statuses=0009 0009 00:52:09 Msec=1500 True Az=54.93 Ze=115.425 Az status=0009 Ze status=0009 00:52:09 Check angles 00:52:09 SkyScan query 00:52:10 SkyScan query done: ret=0 az=40.98<-2732 ze=94.41<-5706 Statuses=0009 0009 00:52:10 Msec=2250 True Az=40.98 Ze=94.41 Az status=0009 Ze status=0009 00:52:10 Check angles 00:52:10 SkyScan query 00:52:10 SkyScan query done: ret=0 az=40.995<-2733 ze=73.485<-7101 Statuses=0008 0009 00:52:10 Msec=3000 True Az=40.995 Ze=73.485 Az status=0008 Ze status=0009 00:52:10 Check angles 00:52:10 SkyScan query 00:52:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.875<-8475 Statuses=0008 0009 00:52:11 Msec=3750 True Az=40.995 Ze=52.875 Az status=0008 Ze status=0009 00:52:11 Check angles 00:52:11 SkyScan query 00:52:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:52:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:52:12 Message to Master queued w/err=0: serial=125432 error=0 00:52:17 Received message from Master: op=Filter serial=125433 00:52:17 Color wheel filter change from 0 to 0 00:52:17 FLIGetFilterPos err=0 currentPosition=0 00:52:17 FLIGetStepsRemaining err=0 RemainingSteps=0 00:52:17 Filter is already there-color wheel unchanged 00:52:17 Received message from Master: op=Shutter serial=125434 00:52:17 Shutter LASER close 00:52:17 Received message from Camera: op=State serial=125436 00:52:17 GetSingleValue result=40 Value=cccccccc 00:52:17 SkyScan query 00:52:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:52:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:18 Parameters OK 00:52:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:18 Set A/D data flow result=40 00:52:18 Set A/D channel type result=40 00:52:18 Set A/D encoding result=40 00:52:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:18 Set channel filter=0.000000e+000 result=40 00:52:18 Config A/D Result=40 00:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:18 Get A/D filter: -9.255963e+061 result=40 00:52:18 Get A/D value=-858993460 result=40 00:52:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:18 Parameters OK 00:52:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:18 Set A/D data flow result=40 00:52:18 Set A/D channel type result=40 00:52:18 Set A/D encoding result=40 00:52:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:18 Set channel filter=0.000000e+000 result=40 00:52:18 Config A/D Result=40 00:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:18 Get A/D filter: -9.255963e+061 result=40 00:52:18 Get A/D value=-858993460 result=40 00:52:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:52:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:52:18 Aux= 00:52:18 Message to Camera, serial 125436 queued 00:52:55 Received message from Master: op=PointingHead serial=125449 00:52:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:52:55 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:52:55 Point started: ret=0 00:52:55 point_skyscan result=0 00:52:56 Check angles 00:52:56 SkyScan query 00:52:56 SkyScan query done: ret=0 az=40.995<-2733 ze=21.36<-10576 Statuses=0008 0009 00:52:56 Msec=0 True Az=40.995 Ze=21.36 Az status=0008 Ze status=0009 00:52:57 Check angles 00:52:57 SkyScan query 00:52:57 SkyScan query done: ret=0 az=40.995<-2733 ze=0.465<-11969 Statuses=0008 0009 00:52:57 Msec=750 True Az=40.995 Ze=0.465 Az status=0008 Ze status=0009 00:52:57 Check angles 00:52:57 SkyScan query 00:52:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.475<-13365 Statuses=0008 0009 00:52:58 Msec=1500 True Az=40.995 Ze=-20.475 Az status=0008 Ze status=0009 00:52:58 Check angles 00:52:58 SkyScan query 00:52:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 00:52:59 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 00:52:59 Check angles 00:52:59 SkyScan query 00:52:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 00:52:59 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 00:52:59 Message to Master queued w/err=0: serial=125449 error=0 00:53:04 Received message from Master: op=Filter serial=125450 00:53:04 Color wheel filter change from 0 to 0 00:53:04 FLIGetFilterPos err=0 currentPosition=0 00:53:04 FLIGetStepsRemaining err=0 RemainingSteps=0 00:53:04 Filter is already there-color wheel unchanged 00:53:05 Received message from Master: op=Shutter serial=125451 00:53:05 Shutter LASER close 00:53:05 Received message from Camera: op=State serial=125453 00:53:05 GetSingleValue result=40 Value=cccccccc 00:53:05 SkyScan query 00:53:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:53:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:05 Parameters OK 00:53:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:05 Set A/D data flow result=40 00:53:05 Set A/D channel type result=40 00:53:05 Set A/D encoding result=40 00:53:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:05 Set channel filter=0.000000e+000 result=40 00:53:05 Config A/D Result=40 00:53:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:05 Get A/D filter: -9.255963e+061 result=40 00:53:05 Get A/D value=-858993460 result=40 00:53:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:05 Parameters OK 00:53:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:05 Set A/D data flow result=40 00:53:05 Set A/D channel type result=40 00:53:05 Set A/D encoding result=40 00:53:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:05 Set channel filter=0.000000e+000 result=40 00:53:05 Config A/D Result=40 00:53:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:05 Get A/D filter: -9.255963e+061 result=40 00:53:05 Get A/D value=-858993460 result=40 00:53:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:53:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:53:05 Aux= 00:53:05 Message to Camera, serial 125453 queued 00:53:42 Received message from Master: op=PointingHead serial=125466 00:53:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:53:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:53:42 Point started: ret=0 00:53:42 point_skyscan result=0 00:53:43 Check angles 00:53:43 SkyScan query 00:53:44 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.085<-16539 Statuses=0009 0009 00:53:44 Msec=0 True Az=63.9 Ze=-68.085 Az status=0009 Ze status=0009 00:53:44 Check angles 00:53:44 SkyScan query 00:53:44 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.055<-17937 Statuses=0009 0009 00:53:44 Msec=750 True Az=81.33 Ze=-89.055 Az status=0009 Ze status=0009 00:53:45 Check angles 00:53:45 SkyScan query 00:53:45 SkyScan query done: ret=0 az=98.85<-6590 ze=-110.01<-19334 Statuses=0009 0009 00:53:45 Msec=1500 True Az=98.85 Ze=-110.01 Az status=0009 Ze status=0009 00:53:45 Check angles 00:53:45 SkyScan query 00:53:46 SkyScan query done: ret=0 az=116.235<-7749 ze=-130.965<-20731 Statuses=0009 0009 00:53:46 Msec=2250 True Az=116.235 Ze=-130.965 Az status=0009 Ze status=0009 00:53:46 Check angles 00:53:46 SkyScan query 00:53:47 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 00:53:47 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 00:53:47 Check angles 00:53:47 SkyScan query 00:53:47 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:53:47 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:53:47 Message to Master queued w/err=0: serial=125466 error=0 00:53:52 Received message from Master: op=Filter serial=125467 00:53:52 Color wheel filter change from 0 to 0 00:53:52 FLIGetFilterPos err=0 currentPosition=0 00:53:52 FLIGetStepsRemaining err=0 RemainingSteps=0 00:53:52 Filter is already there-color wheel unchanged 00:53:53 Received message from Master: op=Shutter serial=125468 00:53:53 Shutter LASER close 00:53:53 Received message from Camera: op=State serial=125470 00:53:53 GetSingleValue result=40 Value=cccccccc 00:53:53 SkyScan query 00:53:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:53:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:53 Parameters OK 00:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:53 Set A/D data flow result=40 00:53:53 Set A/D channel type result=40 00:53:53 Set A/D encoding result=40 00:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:53 Set channel filter=0.000000e+000 result=40 00:53:53 Config A/D Result=40 00:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:53 Get A/D filter: -9.255963e+061 result=40 00:53:53 Get A/D value=-858993460 result=40 00:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:53 Parameters OK 00:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:53 Set A/D data flow result=40 00:53:53 Set A/D channel type result=40 00:53:53 Set A/D encoding result=40 00:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:53 Set channel filter=0.000000e+000 result=40 00:53:53 Config A/D Result=40 00:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:53 Get A/D filter: -9.255963e+061 result=40 00:53:53 Get A/D value=-858993460 result=40 00:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:53:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:53:53 Aux= 00:53:53 Message to Camera, serial 125470 queued 00:54:30 Received message from Master: op=PointingHead serial=125483 00:54:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:54:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:54:30 Point started: ret=0 00:54:30 point_skyscan result=0 00:54:31 Check angles 00:54:31 SkyScan query 00:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0009 0009 00:54:32 Msec=0 True Az=112.995 Ze=-171.45 Az status=0009 Ze status=0009 00:54:32 Check angles 00:54:32 SkyScan query 00:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:54:32 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:54:32 Message to Master queued w/err=0: serial=125483 error=0 00:54:37 Received message from Master: op=Filter serial=125484 00:54:37 Color wheel filter change from 0 to 0 00:54:37 FLIGetFilterPos err=0 currentPosition=0 00:54:37 FLIGetStepsRemaining err=0 RemainingSteps=0 00:54:37 Filter is already there-color wheel unchanged 00:54:38 Received message from Master: op=Shutter serial=125485 00:54:38 Shutter LASER open 00:54:38 Received message from Camera: op=State serial=125487 00:54:38 GetSingleValue result=40 Value=cccccccc 00:54:38 SkyScan query 00:54:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:54:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:38 Parameters OK 00:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:38 Set A/D data flow result=40 00:54:38 Set A/D channel type result=40 00:54:38 Set A/D encoding result=40 00:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:38 Set channel filter=0.000000e+000 result=40 00:54:38 Config A/D Result=40 00:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:38 Get A/D filter: -9.255963e+061 result=40 00:54:38 Get A/D value=-858993460 result=40 00:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:38 Parameters OK 00:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:38 Set A/D data flow result=40 00:54:38 Set A/D channel type result=40 00:54:38 Set A/D encoding result=40 00:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:38 Set channel filter=0.000000e+000 result=40 00:54:38 Config A/D Result=40 00:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:38 Get A/D filter: -9.255963e+061 result=40 00:54:38 Get A/D value=-858993460 result=40 00:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:54:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:54:38 Aux= 00:54:38 Message to Camera, serial 125487 queued 00:54:47 Received message from Master: op=Shutter serial=125497 00:54:47 Shutter LASER close 00:54:47 Received message from Master: op=PointingHead serial=125501 00:54:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:54:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:54:48 Point started: ret=0 00:54:48 point_skyscan result=0 00:54:49 Check angles 00:54:49 SkyScan query 00:54:49 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.19<-21546 Statuses=0009 0009 00:54:49 Msec=0 True Az=135.975 Ze=-143.19 Az status=0009 Ze status=0009 00:54:49 Check angles 00:54:49 SkyScan query 00:54:50 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.19<-20146 Statuses=0009 0009 00:54:50 Msec=750 True Az=153.585 Ze=-122.19 Az status=0009 Ze status=0009 00:54:50 Check angles 00:54:50 SkyScan query 00:54:51 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.31<-18754 Statuses=0009 0009 00:54:51 Msec=1500 True Az=171.045 Ze=-101.31 Az status=0009 Ze status=0009 00:54:51 Check angles 00:54:51 SkyScan query 00:54:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.325<-17355 Statuses=0008 0009 00:54:51 Msec=2250 True Az=176.01 Ze=-80.325 Az status=0008 Ze status=0009 00:54:52 Check angles 00:54:52 SkyScan query 00:54:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.385<-15959 Statuses=0008 0009 00:54:52 Msec=3000 True Az=176.01 Ze=-59.385 Az status=0008 Ze status=0009 00:54:52 Check angles 00:54:52 SkyScan query 00:54:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 00:54:53 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 00:54:53 Message to Master queued w/err=0: serial=125501 error=0 00:54:58 Received message from Master: op=Filter serial=125502 00:54:58 Color wheel filter change from 0 to 0 00:54:58 FLIGetFilterPos err=0 currentPosition=0 00:54:58 FLIGetStepsRemaining err=0 RemainingSteps=0 00:54:58 Filter is already there-color wheel unchanged 00:54:58 Received message from Master: op=Shutter serial=125503 00:54:58 Shutter LASER close 00:54:58 Received message from Camera: op=State serial=125505 00:54:58 GetSingleValue result=40 Value=cccccccc 00:54:58 SkyScan query 00:54:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:54:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:59 Parameters OK 00:54:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:59 Set A/D data flow result=40 00:54:59 Set A/D channel type result=40 00:54:59 Set A/D encoding result=40 00:54:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:59 Set channel filter=0.000000e+000 result=40 00:54:59 Config A/D Result=40 00:54:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:59 Get A/D filter: -9.255963e+061 result=40 00:54:59 Get A/D value=-858993460 result=40 00:54:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:59 Parameters OK 00:54:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:59 Set A/D data flow result=40 00:54:59 Set A/D channel type result=40 00:54:59 Set A/D encoding result=40 00:54:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:59 Set channel filter=0.000000e+000 result=40 00:54:59 Config A/D Result=40 00:54:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:59 Get A/D filter: -9.255963e+061 result=40 00:54:59 Get A/D value=-858993460 result=40 00:54:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:54:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:54:59 Aux= 00:54:59 Message to Camera, serial 125505 queued 00:55:36 Received message from Master: op=PointingHead serial=125518 00:55:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) [UTC 2018-12-14 00:55:36] 00:55:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:55:36 Point started: ret=0 00:55:36 point_skyscan result=0 00:55:37 Check angles 00:55:37 SkyScan query 00:55:37 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.6<-13440 Statuses=0009 0009 00:55:37 Msec=0 True Az=152.925 Ze=-21.6 Az status=0009 Ze status=0009 00:55:38 Check angles 00:55:38 SkyScan query 00:55:38 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.6<-12040 Statuses=0009 0009 00:55:38 Msec=750 True Az=135.42 Ze=-0.6 Az status=0009 Ze status=0009 00:55:38 Check angles 00:55:38 SkyScan query 00:55:39 SkyScan query done: ret=0 az=117.825<-7855 ze=20.325<-10645 Statuses=0009 0009 00:55:39 Msec=1500 True Az=117.825 Ze=20.325 Az status=0009 Ze status=0009 00:55:39 Check angles 00:55:39 SkyScan query 00:55:40 SkyScan query done: ret=0 az=100.44<-6696 ze=41.31<-9246 Statuses=0009 0009 00:55:40 Msec=2250 True Az=100.44 Ze=41.31 Az status=0009 Ze status=0009 00:55:40 Check angles 00:55:40 SkyScan query 00:55:40 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 00:55:40 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 00:55:41 Check angles 00:55:41 SkyScan query 00:55:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:55:41 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:55:41 Message to Master queued w/err=0: serial=125518 error=0 00:55:46 Received message from Master: op=Filter serial=125519 00:55:46 Color wheel filter change from 0 to 0 00:55:46 FLIGetFilterPos err=0 currentPosition=0 00:55:46 FLIGetStepsRemaining err=0 RemainingSteps=0 00:55:46 Filter is already there-color wheel unchanged 00:55:46 Received message from Master: op=Shutter serial=125520 00:55:46 Shutter LASER close 00:55:46 Received message from Camera: op=State serial=125522 00:55:46 GetSingleValue result=40 Value=cccccccc 00:55:46 SkyScan query 00:55:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:55:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:47 Parameters OK 00:55:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:47 Set A/D data flow result=40 00:55:47 Set A/D channel type result=40 00:55:47 Set A/D encoding result=40 00:55:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:47 Set channel filter=0.000000e+000 result=40 00:55:47 Config A/D Result=40 00:55:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:47 Get A/D filter: -9.255963e+061 result=40 00:55:47 Get A/D value=-858993460 result=40 00:55:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:47 Parameters OK 00:55:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:47 Set A/D data flow result=40 00:55:47 Set A/D channel type result=40 00:55:47 Set A/D encoding result=40 00:55:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:47 Set channel filter=0.000000e+000 result=40 00:55:47 Config A/D Result=40 00:55:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:47 Get A/D filter: -9.255963e+061 result=40 00:55:47 Get A/D value=-858993460 result=40 00:55:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:55:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:55:47 Aux= 00:55:47 Message to Camera, serial 125522 queued [UTC 2018-12-14 00:55:52] 00:56:24 Received message from Master: op=PointingHead serial=125535 00:56:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:56:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:56:24 Point started: ret=0 00:56:24 point_skyscan result=0 00:56:25 Check angles 00:56:25 SkyScan query 00:56:25 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 00:56:25 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 00:56:26 Check angles 00:56:26 SkyScan query 00:56:26 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 00:56:26 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 00:56:26 Check angles 00:56:26 SkyScan query 00:56:27 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 00:56:27 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 00:56:27 Check angles 00:56:27 SkyScan query 00:56:28 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 00:56:28 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 00:56:28 Check angles 00:56:28 SkyScan query 00:56:28 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:56:28 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:56:29 Check angles 00:56:29 SkyScan query 00:56:29 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:56:29 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:56:29 Message to Master queued w/err=0: serial=125535 error=0 00:56:34 Received message from Master: op=Filter serial=125536 00:56:34 Color wheel filter change from 0 to 0 00:56:34 FLIGetFilterPos err=0 currentPosition=0 00:56:34 FLIGetStepsRemaining err=0 RemainingSteps=0 00:56:34 Filter is already there-color wheel unchanged 00:56:34 Received message from Master: op=Shutter serial=125537 00:56:34 Shutter LASER close 00:56:34 Received message from Camera: op=State serial=125539 00:56:34 GetSingleValue result=40 Value=cccccccc 00:56:34 SkyScan query 00:56:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:56:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:35 Parameters OK 00:56:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:35 Set A/D data flow result=40 00:56:35 Set A/D channel type result=40 00:56:35 Set A/D encoding result=40 00:56:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:35 Set channel filter=0.000000e+000 result=40 00:56:35 Config A/D Result=40 00:56:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:35 Get A/D filter: -9.255963e+061 result=40 00:56:35 Get A/D value=-858993460 result=40 00:56:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:35 Parameters OK 00:56:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:35 Set A/D data flow result=40 00:56:35 Set A/D channel type result=40 00:56:35 Set A/D encoding result=40 00:56:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:35 Set channel filter=0.000000e+000 result=40 00:56:35 Config A/D Result=40 00:56:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:35 Get A/D filter: -9.255963e+061 result=40 00:56:35 Get A/D value=-858993460 result=40 00:56:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:56:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:56:35 Aux= 00:56:35 Message to Camera, serial 125539 queued 00:57:11 Received message from Master: op=PointingHead serial=125551 00:57:11 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:57:11 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:57:11 Point started: ret=0 00:57:11 point_skyscan result=0 00:57:12 Check angles 00:57:12 SkyScan query 00:57:13 SkyScan query done: ret=0 az=152.58<-10172 ze=8.265<-11449 Statuses=0009 0009 00:57:13 Msec=0 True Az=152.58 Ze=8.265 Az status=0009 Ze status=0009 00:57:13 Check angles 00:57:13 SkyScan query 00:57:13 SkyScan query done: ret=0 az=135.015<-9001 ze=-12.705<-12847 Statuses=0009 0009 00:57:13 Msec=750 True Az=135.015 Ze=-12.705 Az status=0009 Ze status=0009 00:57:14 Check angles 00:57:14 SkyScan query 00:57:14 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.615<-14241 Statuses=0009 0009 00:57:14 Msec=1500 True Az=117.54 Ze=-33.615 Az status=0009 Ze status=0009 00:57:14 Check angles 00:57:14 SkyScan query 00:57:15 SkyScan query done: ret=0 az=99.705<-6647 ze=-51.57<-15438 Statuses=0009 0009 00:57:15 Msec=2250 True Az=99.705 Ze=-51.57 Az status=0009 Ze status=0009 00:57:15 Check angles 00:57:15 SkyScan query 00:57:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 00:57:16 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 00:57:16 Check angles 00:57:16 SkyScan query 00:57:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:57:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:57:16 Message to Master queued w/err=0: serial=125551 error=0 00:57:21 Received message from Master: op=Filter serial=125552 00:57:21 Color wheel filter change from 0 to 0 00:57:21 FLIGetFilterPos err=0 currentPosition=0 00:57:21 FLIGetStepsRemaining err=0 RemainingSteps=0 00:57:21 Filter is already there-color wheel unchanged 00:57:22 Received message from Master: op=Shutter serial=125553 00:57:22 Shutter LASER close 00:57:22 Received message from Camera: op=State serial=125555 00:57:22 GetSingleValue result=40 Value=cccccccc 00:57:22 SkyScan query 00:57:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:57:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:22 Parameters OK 00:57:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:22 Set A/D data flow result=40 00:57:22 Set A/D channel type result=40 00:57:22 Set A/D encoding result=40 00:57:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:22 Set channel filter=0.000000e+000 result=40 00:57:22 Config A/D Result=40 00:57:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:22 Get A/D filter: -9.255963e+061 result=40 00:57:22 Get A/D value=-858993460 result=40 00:57:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:22 Parameters OK 00:57:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:22 Set A/D data flow result=40 00:57:22 Set A/D channel type result=40 00:57:22 Set A/D encoding result=40 00:57:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:22 Set channel filter=0.000000e+000 result=40 00:57:22 Config A/D Result=40 00:57:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:22 Get A/D filter: -9.255963e+061 result=40 00:57:22 Get A/D value=-858993460 result=40 00:57:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:57:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:57:22 Aux= 00:57:22 Message to Camera, serial 125555 queued 00:57:59 Received message from Master: op=PointingHead serial=125568 00:57:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:57:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:57:59 Point started: ret=0 00:57:59 point_skyscan result=0 00:58:00 Check angles 00:58:00 SkyScan query 00:58:01 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.3<-17420 Statuses=0009 0009 00:58:01 Msec=0 True Az=109.125 Ze=-81.3 Az status=0009 Ze status=0009 00:58:01 Check angles 00:58:01 SkyScan query 00:58:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 00:58:01 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 00:58:02 Check angles 00:58:02 SkyScan query 00:58:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.225<-20215 Statuses=0008 0009 00:58:02 Msec=1500 True Az=112.995 Ze=-123.225 Az status=0008 Ze status=0009 00:58:02 Check angles 00:58:02 SkyScan query 00:58:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.18<-21612 Statuses=0008 0009 00:58:03 Msec=2250 True Az=112.995 Ze=-144.18 Az status=0008 Ze status=0009 00:58:03 Check angles 00:58:03 SkyScan query 00:58:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.135<-23009 Statuses=0008 0009 00:58:04 Msec=3000 True Az=112.995 Ze=-165.135 Az status=0008 Ze status=0009 00:58:04 Check angles 00:58:04 SkyScan query 00:58:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:58:04 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:58:04 Message to Master queued w/err=0: serial=125568 error=0 00:58:09 Received message from Master: op=Filter serial=125569 00:58:09 Color wheel filter change from 0 to 0 00:58:09 FLIGetFilterPos err=0 currentPosition=0 00:58:09 FLIGetStepsRemaining err=0 RemainingSteps=0 00:58:09 Filter is already there-color wheel unchanged 00:58:10 Received message from Master: op=Shutter serial=125570 00:58:10 Shutter LASER open 00:58:10 Received message from Camera: op=State serial=125572 00:58:10 GetSingleValue result=40 Value=cccccccc 00:58:10 SkyScan query 00:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:58:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:10 Parameters OK 00:58:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:10 Set A/D data flow result=40 00:58:10 Set A/D channel type result=40 00:58:10 Set A/D encoding result=40 00:58:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:10 Set channel filter=0.000000e+000 result=40 00:58:10 Config A/D Result=40 00:58:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:10 Get A/D filter: -9.255963e+061 result=40 00:58:10 Get A/D value=-858993460 result=40 00:58:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:10 Parameters OK 00:58:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:10 Set A/D data flow result=40 00:58:10 Set A/D channel type result=40 00:58:10 Set A/D encoding result=40 00:58:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:10 Set channel filter=0.000000e+000 result=40 00:58:10 Config A/D Result=40 00:58:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:10 Get A/D filter: -9.255963e+061 result=40 00:58:10 Get A/D value=-858993460 result=40 00:58:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:58:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:58:10 Aux= 00:58:10 Message to Camera, serial 125572 queued 00:58:19 Received message from Master: op=Shutter serial=125582 00:58:19 Shutter LASER close 00:58:19 Received message from Master: op=PointingHead serial=125586 00:58:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:58:19 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:58:20 Point started: ret=0 00:58:20 point_skyscan result=0 00:58:20 Check angles 00:58:20 SkyScan query 00:58:21 SkyScan query done: ret=0 az=89.58<-5972 ze=156.885<-1541 Statuses=0009 0009 00:58:21 Msec=0 True Az=89.58 Ze=156.885 Az status=0009 Ze status=0009 00:58:21 Check angles 00:58:21 SkyScan query 00:58:22 SkyScan query done: ret=0 az=72.045<-4803 ze=135.945<-2937 Statuses=0009 0009 00:58:22 Msec=750 True Az=72.045 Ze=135.945 Az status=0009 Ze status=0009 00:58:22 Check angles 00:58:22 SkyScan query 00:58:22 SkyScan query done: ret=0 az=54.75<-3650 ze=114.975<-4335 Statuses=0009 0009 00:58:22 Msec=1500 True Az=54.75 Ze=114.975 Az status=0009 Ze status=0009 00:58:23 Check angles 00:58:23 SkyScan query 00:58:23 SkyScan query done: ret=0 az=40.965<-2731 ze=93.585<-5761 Statuses=0009 0009 00:58:23 Msec=2250 True Az=40.965 Ze=93.585 Az status=0009 Ze status=0009 00:58:23 Check angles 00:58:23 SkyScan query 00:58:24 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 00:58:24 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 00:58:24 Check angles 00:58:24 SkyScan query 00:58:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 00:58:25 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 00:58:25 Check angles 00:58:25 SkyScan query 00:58:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:58:25 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:58:25 Message to Master queued w/err=0: serial=125586 error=0 00:58:30 Received message from Master: op=Filter serial=125587 00:58:30 Color wheel filter change from 0 to 0 00:58:30 FLIGetFilterPos err=0 currentPosition=0 00:58:30 FLIGetStepsRemaining err=0 RemainingSteps=0 00:58:30 Filter is already there-color wheel unchanged 00:58:31 Received message from Master: op=Shutter serial=125588 00:58:31 Shutter LASER close 00:58:31 Received message from Camera: op=State serial=125590 00:58:31 GetSingleValue result=40 Value=cccccccc 00:58:31 SkyScan query 00:58:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:58:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:31 Parameters OK 00:58:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:31 Set A/D data flow result=40 00:58:31 Set A/D channel type result=40 00:58:31 Set A/D encoding result=40 00:58:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:31 Set channel filter=0.000000e+000 result=40 00:58:31 Config A/D Result=40 00:58:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:31 Get A/D filter: -9.255963e+061 result=40 00:58:31 Get A/D value=-858993460 result=40 00:58:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:31 Parameters OK 00:58:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:31 Set A/D data flow result=40 00:58:31 Set A/D channel type result=40 00:58:31 Set A/D encoding result=40 00:58:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:31 Set channel filter=0.000000e+000 result=40 00:58:31 Config A/D Result=40 00:58:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:31 Get A/D filter: -9.255963e+061 result=40 00:58:31 Get A/D value=-858993460 result=40 00:58:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:58:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:58:31 Aux= 00:58:31 Message to Camera, serial 125590 queued 00:59:08 Received message from Master: op=PointingHead serial=125603 00:59:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:59:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:59:09 Point started: ret=0 00:59:09 point_skyscan result=0 00:59:09 Check angles 00:59:09 SkyScan query 00:59:10 SkyScan query done: ret=0 az=40.995<-2733 ze=21.33<-10578 Statuses=0008 0009 00:59:10 Msec=0 True Az=40.995 Ze=21.33 Az status=0008 Ze status=0009 00:59:10 Check angles 00:59:10 SkyScan query 00:59:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.09<-12006 Statuses=0008 0009 00:59:11 Msec=750 True Az=40.995 Ze=-0.09 Az status=0008 Ze status=0009 00:59:11 Check angles 00:59:11 SkyScan query 00:59:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.03<-13402 Statuses=0008 0009 00:59:12 Msec=1500 True Az=40.995 Ze=-21.03 Az status=0008 Ze status=0009 00:59:12 Check angles 00:59:12 SkyScan query 00:59:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 00:59:12 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 00:59:12 Check angles 00:59:12 SkyScan query 00:59:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 00:59:13 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 00:59:13 Message to Master queued w/err=0: serial=125603 error=0 00:59:18 Received message from Master: op=Filter serial=125604 00:59:18 Color wheel filter change from 0 to 0 00:59:18 FLIGetFilterPos err=0 currentPosition=0 00:59:18 FLIGetStepsRemaining err=0 RemainingSteps=0 00:59:18 Filter is already there-color wheel unchanged 00:59:18 Received message from Master: op=Shutter serial=125605 00:59:18 Shutter LASER close 00:59:18 Received message from Camera: op=State serial=125607 00:59:18 GetSingleValue result=40 Value=cccccccc 00:59:18 SkyScan query 00:59:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:59:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:59:19 Parameters OK 00:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:59:19 Set A/D data flow result=40 00:59:19 Set A/D channel type result=40 00:59:19 Set A/D encoding result=40 00:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:59:19 Set channel filter=0.000000e+000 result=40 00:59:19 Config A/D Result=40 00:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:59:19 Get A/D filter: -9.255963e+061 result=40 00:59:19 Get A/D value=-858993460 result=40 00:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:59:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:59:19 Parameters OK 00:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:59:19 Set A/D data flow result=40 00:59:19 Set A/D channel type result=40 00:59:19 Set A/D encoding result=40 00:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:59:19 Set channel filter=0.000000e+000 result=40 00:59:19 Config A/D Result=40 00:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:59:19 Get A/D filter: -9.255963e+061 result=40 00:59:19 Get A/D value=-858993460 result=40 00:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:59:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:59:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:59:19 Aux= 00:59:19 Message to Camera, serial 125607 queued 00:59:56 Received message from Master: op=PointingHead serial=125620 00:59:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:59:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:59:56 Point started: ret=0 00:59:56 point_skyscan result=0 00:59:57 Check angles 00:59:57 SkyScan query 00:59:57 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.205<-16547 Statuses=0009 0009 00:59:57 Msec=0 True Az=63.81 Ze=-68.205 Az status=0009 Ze status=0009 00:59:58 Check angles 00:59:58 SkyScan query 00:59:58 SkyScan query done: ret=0 az=81.195<-5413 ze=-89.1<-17940 Statuses=0009 0009 00:59:58 Msec=750 True Az=81.195 Ze=-89.1 Az status=0009 Ze status=0009 00:59:58 Check angles 00:59:58 SkyScan query 00:59:59 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.475<-19365 Statuses=0009 0009 00:59:59 Msec=1500 True Az=99.18 Ze=-110.475 Az status=0009 Ze status=0009 00:59:59 Check angles 00:59:59 SkyScan query 01:00:00 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.43<-20762 Statuses=0009 0009 01:00:00 Msec=2250 True Az=116.82 Ze=-131.43 Az status=0009 Ze status=0009 01:00:00 Check angles 01:00:00 SkyScan query 01:00:00 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 01:00:00 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 01:00:01 Check angles 01:00:01 SkyScan query 01:00:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:00:01 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:00:01 Message to Master queued w/err=0: serial=125620 error=0 01:00:06 Received message from Master: op=Filter serial=125621 01:00:06 Color wheel filter change from 0 to 0 01:00:06 FLIGetFilterPos err=0 currentPosition=0 01:00:06 FLIGetStepsRemaining err=0 RemainingSteps=0 01:00:06 Filter is already there-color wheel unchanged 01:00:06 Received message from Master: op=Shutter serial=125622 01:00:06 Shutter LASER close 01:00:06 Received message from Camera: op=State serial=125624 01:00:06 GetSingleValue result=40 Value=cccccccc 01:00:06 SkyScan query 01:00:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:00:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:07 Parameters OK 01:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:07 Set A/D data flow result=40 01:00:07 Set A/D channel type result=40 01:00:07 Set A/D encoding result=40 01:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:07 Set channel filter=0.000000e+000 result=40 01:00:07 Config A/D Result=40 01:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:07 Get A/D filter: -9.255963e+061 result=40 01:00:07 Get A/D value=-858993460 result=40 01:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:07 Parameters OK 01:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:07 Set A/D data flow result=40 01:00:07 Set A/D channel type result=40 01:00:07 Set A/D encoding result=40 01:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:07 Set channel filter=0.000000e+000 result=40 01:00:07 Config A/D Result=40 01:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:07 Get A/D filter: -9.255963e+061 result=40 01:00:07 Get A/D value=-858993460 result=40 01:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:00:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:00:07 Aux= 01:00:07 Message to Camera, serial 125624 queued 01:00:44 Received message from Master: op=PointingHead serial=125637 01:00:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:00:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:00:44 Point started: ret=0 01:00:44 point_skyscan result=0 01:00:45 Check angles 01:00:45 SkyScan query 01:00:45 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.315<-23421 Statuses=0009 0009 01:00:45 Msec=0 True Az=113.01 Ze=-171.315 Az status=0009 Ze status=0009 01:00:46 Check angles 01:00:46 SkyScan query 01:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:00:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:00:46 Message to Master queued w/err=0: serial=125637 error=0 01:00:51 Received message from Master: op=Filter serial=125638 01:00:51 Color wheel filter change from 0 to 0 01:00:51 FLIGetFilterPos err=0 currentPosition=0 01:00:51 FLIGetStepsRemaining err=0 RemainingSteps=0 01:00:51 Filter is already there-color wheel unchanged 01:00:51 Received message from Master: op=Shutter serial=125639 01:00:51 Shutter LASER open 01:00:52 Received message from Camera: op=State serial=125641 01:00:52 GetSingleValue result=40 Value=cccccccc 01:00:52 SkyScan query 01:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:00:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:52 Parameters OK 01:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:52 Set A/D data flow result=40 01:00:52 Set A/D channel type result=40 01:00:52 Set A/D encoding result=40 01:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:52 Set channel filter=0.000000e+000 result=40 01:00:52 Config A/D Result=40 01:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:52 Get A/D filter: -9.255963e+061 result=40 01:00:52 Get A/D value=-858993460 result=40 01:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:52 Parameters OK 01:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:52 Set A/D data flow result=40 01:00:52 Set A/D channel type result=40 01:00:52 Set A/D encoding result=40 01:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:52 Set channel filter=0.000000e+000 result=40 01:00:52 Config A/D Result=40 01:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:52 Get A/D filter: -9.255963e+061 result=40 01:00:52 Get A/D value=-858993460 result=40 01:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:00:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:00:52 Aux= 01:00:52 Message to Camera, serial 125641 queued 01:01:01 Received message from Master: op=Shutter serial=125651 01:01:01 Shutter LASER close 01:01:01 Received message from Master: op=PointingHead serial=125655 01:01:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:01:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:01:02 Point started: ret=0 01:01:02 point_skyscan result=0 01:01:02 Check angles 01:01:02 SkyScan query 01:01:03 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.19<-21546 Statuses=0009 0009 01:01:03 Msec=0 True Az=135.93 Ze=-143.19 Az status=0009 Ze status=0009 01:01:03 Check angles 01:01:03 SkyScan query 01:01:04 SkyScan query done: ret=0 az=153.66<-10244 ze=-121.785<-20119 Statuses=0009 0009 01:01:04 Msec=750 True Az=153.66 Ze=-121.785 Az status=0009 Ze status=0009 01:01:04 Check angles 01:01:04 SkyScan query 01:01:04 SkyScan query done: ret=0 az=170.925<-11395 ze=-101.34<-18756 Statuses=0009 0009 01:01:04 Msec=1500 True Az=170.925 Ze=-101.34 Az status=0009 Ze status=0009 01:01:05 Check angles 01:01:05 SkyScan query 01:01:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.34<-17356 Statuses=0008 0009 01:01:05 Msec=2250 True Az=176.01 Ze=-80.34 Az status=0008 Ze status=0009 01:01:05 Check angles 01:01:05 SkyScan query 01:01:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.385<-15959 Statuses=0008 0009 01:01:06 Msec=3000 True Az=176.01 Ze=-59.385 Az status=0008 Ze status=0009 01:01:06 Check angles 01:01:06 SkyScan query 01:01:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:01:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:01:07 Message to Master queued w/err=0: serial=125655 error=0 01:01:12 Received message from Master: op=Filter serial=125656 01:01:12 Color wheel filter change from 0 to 0 01:01:12 FLIGetFilterPos err=0 currentPosition=0 01:01:12 FLIGetStepsRemaining err=0 RemainingSteps=0 01:01:12 Filter is already there-color wheel unchanged 01:01:12 Received message from Master: op=Shutter serial=125657 01:01:12 Shutter LASER close 01:01:12 Received message from Camera: op=State serial=125659 01:01:12 GetSingleValue result=40 Value=cccccccc 01:01:12 SkyScan query 01:01:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:01:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:13 Parameters OK 01:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:13 Set A/D data flow result=40 01:01:13 Set A/D channel type result=40 01:01:13 Set A/D encoding result=40 01:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:13 Set channel filter=0.000000e+000 result=40 01:01:13 Config A/D Result=40 01:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:13 Get A/D filter: -9.255963e+061 result=40 01:01:13 Get A/D value=-858993460 result=40 01:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:13 Parameters OK 01:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:13 Set A/D data flow result=40 01:01:13 Set A/D channel type result=40 01:01:13 Set A/D encoding result=40 01:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:13 Set channel filter=0.000000e+000 result=40 01:01:13 Config A/D Result=40 01:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:13 Get A/D filter: -9.255963e+061 result=40 01:01:13 Get A/D value=-858993460 result=40 01:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:01:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:01:13 Aux= 01:01:13 Message to Camera, serial 125659 queued 01:01:49 Received message from Master: op=PointingHead serial=125672 01:01:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:01:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:01:50 Point started: ret=0 01:01:50 point_skyscan result=0 01:01:50 Check angles 01:01:50 SkyScan query 01:01:51 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.975<-13465 Statuses=0009 0009 01:01:51 Msec=0 True Az=153.165 Ze=-21.975 Az status=0009 Ze status=0009 01:01:51 Check angles 01:01:51 SkyScan query 01:01:52 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.99<-12066 Statuses=0009 0009 01:01:52 Msec=750 True Az=135.735 Ze=-0.99 Az status=0009 Ze status=0009 01:01:52 Check angles 01:01:52 SkyScan query 01:01:53 SkyScan query done: ret=0 az=118.17<-7878 ze=19.965<-10669 Statuses=0009 0009 01:01:53 Msec=1500 True Az=118.17 Ze=19.965 Az status=0009 Ze status=0009 01:01:53 Check angles 01:01:53 SkyScan query 01:01:53 SkyScan query done: ret=0 az=100.785<-6719 ze=40.92<-9272 Statuses=0009 0009 01:01:53 Msec=2250 True Az=100.785 Ze=40.92 Az status=0009 Ze status=0009 01:01:53 Check angles 01:01:53 SkyScan query 01:01:54 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 01:01:54 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 01:01:54 Check angles 01:01:54 SkyScan query 01:01:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:01:55 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 01:01:55 Message to Master queued w/err=0: serial=125672 error=0 01:02:00 Received message from Master: op=Filter serial=125673 01:02:00 Color wheel filter change from 0 to 0 01:02:00 FLIGetFilterPos err=0 currentPosition=0 01:02:00 FLIGetStepsRemaining err=0 RemainingSteps=0 01:02:00 Filter is already there-color wheel unchanged 01:02:00 Received message from Master: op=Shutter serial=125674 01:02:00 Shutter LASER close 01:02:00 Received message from Camera: op=State serial=125676 01:02:00 GetSingleValue result=40 Value=cccccccc 01:02:00 SkyScan query 01:02:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:02:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:01 Parameters OK 01:02:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:01 Set A/D data flow result=40 01:02:01 Set A/D channel type result=40 01:02:01 Set A/D encoding result=40 01:02:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:01 Set channel filter=0.000000e+000 result=40 01:02:01 Config A/D Result=40 01:02:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:01 Get A/D filter: -9.255963e+061 result=40 01:02:01 Get A/D value=-858993460 result=40 01:02:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:01 Parameters OK 01:02:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:01 Set A/D data flow result=40 01:02:01 Set A/D channel type result=40 01:02:01 Set A/D encoding result=40 01:02:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:01 Set channel filter=0.000000e+000 result=40 01:02:01 Config A/D Result=40 01:02:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:01 Get A/D filter: -9.255963e+061 result=40 01:02:01 Get A/D value=-858993460 result=40 01:02:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:02:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:02:01 Aux= 01:02:01 Message to Camera, serial 125676 queued 01:02:37 Received message from Master: op=PointingHead serial=125689 01:02:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:02:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:02:38 Point started: ret=0 01:02:38 point_skyscan result=0 01:02:39 Check angles 01:02:39 SkyScan query 01:02:39 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 01:02:39 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 01:02:39 Check angles 01:02:39 SkyScan query 01:02:40 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 01:02:40 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 01:02:40 Check angles 01:02:40 SkyScan query 01:02:41 SkyScan query done: ret=0 az=144<-9600 ze=38.505<-9433 Statuses=0009 0008 01:02:41 Msec=1500 True Az=144 Ze=38.505 Az status=0009 Ze status=0008 01:02:41 Check angles 01:02:41 SkyScan query 01:02:41 SkyScan query done: ret=0 az=161.685<-10779 ze=38.505<-9433 Statuses=0009 0008 01:02:41 Msec=2250 True Az=161.685 Ze=38.505 Az status=0009 Ze status=0008 01:02:42 Check angles 01:02:42 SkyScan query 01:02:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:02:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:02:42 Check angles 01:02:42 SkyScan query 01:02:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:02:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:02:43 Message to Master queued w/err=0: serial=125689 error=0 01:02:48 Received message from Master: op=Filter serial=125690 01:02:48 Color wheel filter change from 0 to 0 01:02:48 FLIGetFilterPos err=0 currentPosition=0 01:02:48 FLIGetStepsRemaining err=0 RemainingSteps=0 01:02:48 Filter is already there-color wheel unchanged 01:02:48 Received message from Master: op=Shutter serial=125691 01:02:48 Shutter LASER close 01:02:48 Received message from Camera: op=State serial=125693 01:02:48 GetSingleValue result=40 Value=cccccccc 01:02:48 SkyScan query 01:02:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:02:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:49 Parameters OK 01:02:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:49 Set A/D data flow result=40 01:02:49 Set A/D channel type result=40 01:02:49 Set A/D encoding result=40 01:02:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:49 Set channel filter=0.000000e+000 result=40 01:02:49 Config A/D Result=40 01:02:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:49 Get A/D filter: -9.255963e+061 result=40 01:02:49 Get A/D value=-858993460 result=40 01:02:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:49 Parameters OK 01:02:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:49 Set A/D data flow result=40 01:02:49 Set A/D channel type result=40 01:02:49 Set A/D encoding result=40 01:02:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:49 Set channel filter=0.000000e+000 result=40 01:02:49 Config A/D Result=40 01:02:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:49 Get A/D filter: -9.255963e+061 result=40 01:02:49 Get A/D value=-858993460 result=40 01:02:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:02:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:02:49 Aux= 01:02:49 Message to Camera, serial 125693 queued 01:03:26 Received message from Master: op=PointingHead serial=125706 01:03:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:03:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:03:26 Point started: ret=0 01:03:26 point_skyscan result=0 01:03:27 Check angles 01:03:27 SkyScan query 01:03:27 SkyScan query done: ret=0 az=153.105<-10207 ze=8.91<-11406 Statuses=0009 0009 01:03:27 Msec=0 True Az=153.105 Ze=8.91 Az status=0009 Ze status=0009 01:03:27 Check angles 01:03:27 SkyScan query 01:03:28 SkyScan query done: ret=0 az=135.72<-9048 ze=-12.075<-12805 Statuses=0009 0009 01:03:28 Msec=750 True Az=135.72 Ze=-12.075 Az status=0009 Ze status=0009 01:03:28 Check angles 01:03:28 SkyScan query 01:03:29 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.405<-14227 Statuses=0009 0009 01:03:29 Msec=1500 True Az=117.78 Ze=-33.405 Az status=0009 Ze status=0009 01:03:29 Check angles 01:03:29 SkyScan query 01:03:29 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.555<-15437 Statuses=0009 0009 01:03:29 Msec=2250 True Az=100.035 Ze=-51.555 Az status=0009 Ze status=0009 01:03:30 Check angles 01:03:30 SkyScan query 01:03:30 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:03:30 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:03:30 Check angles 01:03:30 SkyScan query 01:03:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:03:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:03:31 Message to Master queued w/err=0: serial=125706 error=0 01:03:36 Received message from Master: op=Filter serial=125707 01:03:36 Color wheel filter change from 0 to 0 01:03:36 FLIGetFilterPos err=0 currentPosition=0 01:03:36 FLIGetStepsRemaining err=0 RemainingSteps=0 01:03:36 Filter is already there-color wheel unchanged 01:03:36 Received message from Master: op=Shutter serial=125708 01:03:36 Shutter LASER close 01:03:36 Received message from Camera: op=State serial=125710 01:03:36 GetSingleValue result=40 Value=cccccccc 01:03:36 SkyScan query 01:03:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:03:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:37 Parameters OK 01:03:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:37 Set A/D data flow result=40 01:03:37 Set A/D channel type result=40 01:03:37 Set A/D encoding result=40 01:03:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:37 Set channel filter=0.000000e+000 result=40 01:03:37 Config A/D Result=40 01:03:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:37 Get A/D filter: -9.255963e+061 result=40 01:03:37 Get A/D value=-858993460 result=40 01:03:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:37 Parameters OK 01:03:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:37 Set A/D data flow result=40 01:03:37 Set A/D channel type result=40 01:03:37 Set A/D encoding result=40 01:03:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:37 Set channel filter=0.000000e+000 result=40 01:03:37 Config A/D Result=40 01:03:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:37 Get A/D filter: -9.255963e+061 result=40 01:03:37 Get A/D value=-858993460 result=40 01:03:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:03:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:03:37 Aux= 01:03:37 Message to Camera, serial 125710 queued 01:04:14 Received message from Master: op=PointingHead serial=125723 01:04:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:04:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:04:14 Point started: ret=0 01:04:14 point_skyscan result=0 01:04:15 Check angles 01:04:15 SkyScan query 01:04:15 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.03<-17402 Statuses=0009 0009 01:04:15 Msec=0 True Az=108.87 Ze=-81.03 Az status=0009 Ze status=0009 01:04:15 Check angles 01:04:15 SkyScan query 01:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102<-18800 Statuses=0008 0009 01:04:16 Msec=750 True Az=112.995 Ze=-102 Az status=0008 Ze status=0009 01:04:16 Check angles 01:04:16 SkyScan query 01:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.97<-20198 Statuses=0008 0009 01:04:17 Msec=1500 True Az=112.995 Ze=-122.97 Az status=0008 Ze status=0009 01:04:17 Check angles 01:04:17 SkyScan query 01:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 01:04:18 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 01:04:18 Check angles 01:04:18 SkyScan query 01:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.88<-22992 Statuses=0008 0009 01:04:18 Msec=3000 True Az=112.995 Ze=-164.88 Az status=0008 Ze status=0009 01:04:18 Check angles 01:04:18 SkyScan query 01:04:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:04:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:04:19 Message to Master queued w/err=0: serial=125723 error=0 01:04:24 Received message from Master: op=Filter serial=125724 01:04:24 Color wheel filter change from 0 to 0 01:04:24 FLIGetFilterPos err=0 currentPosition=0 01:04:24 FLIGetStepsRemaining err=0 RemainingSteps=0 01:04:24 Filter is already there-color wheel unchanged 01:04:24 Received message from Master: op=Shutter serial=125725 01:04:24 Shutter LASER open 01:04:24 Received message from Camera: op=State serial=125727 01:04:24 GetSingleValue result=40 Value=cccccccc 01:04:24 SkyScan query 01:04:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:04:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:25 Parameters OK 01:04:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:25 Set A/D data flow result=40 01:04:25 Set A/D channel type result=40 01:04:25 Set A/D encoding result=40 01:04:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:25 Set channel filter=0.000000e+000 result=40 01:04:25 Config A/D Result=40 01:04:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:25 Get A/D filter: -9.255963e+061 result=40 01:04:25 Get A/D value=-858993460 result=40 01:04:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:25 Parameters OK 01:04:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:25 Set A/D data flow result=40 01:04:25 Set A/D channel type result=40 01:04:25 Set A/D encoding result=40 01:04:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:25 Set channel filter=0.000000e+000 result=40 01:04:25 Config A/D Result=40 01:04:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:25 Get A/D filter: -9.255963e+061 result=40 01:04:25 Get A/D value=-858993460 result=40 01:04:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:04:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:04:25 Aux= 01:04:25 Message to Camera, serial 125727 queued 01:04:33 Received message from Master: op=Shutter serial=125737 01:04:33 Shutter LASER close 01:04:34 Received message from Master: op=PointingHead serial=125741 01:04:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:04:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:04:34 Point started: ret=0 01:04:34 point_skyscan result=0 01:04:35 Check angles 01:04:35 SkyScan query 01:04:35 SkyScan query done: ret=0 az=90.15<-6010 ze=157.5<-1500 Statuses=0009 0009 01:04:35 Msec=0 True Az=90.15 Ze=157.5 Az status=0009 Ze status=0009 01:04:36 Check angles 01:04:36 SkyScan query 01:04:36 SkyScan query done: ret=0 az=72.3<-4820 ze=136.095<-2927 Statuses=0009 0009 01:04:36 Msec=750 True Az=72.3 Ze=136.095 Az status=0009 Ze status=0009 01:04:36 Check angles 01:04:36 SkyScan query 01:04:37 SkyScan query done: ret=0 az=54.615<-3641 ze=114.69<-4354 Statuses=0009 0009 01:04:37 Msec=1500 True Az=54.615 Ze=114.69 Az status=0009 Ze status=0009 01:04:37 Check angles 01:04:37 SkyScan query 01:04:38 SkyScan query done: ret=0 az=41.01<-2734 ze=93.75<-5750 Statuses=0009 0009 01:04:38 Msec=2250 True Az=41.01 Ze=93.75 Az status=0009 Ze status=0009 01:04:38 Check angles 01:04:38 SkyScan query 01:04:38 SkyScan query done: ret=0 az=40.995<-2733 ze=72.36<-7176 Statuses=0008 0009 01:04:38 Msec=3000 True Az=40.995 Ze=72.36 Az status=0008 Ze status=0009 01:04:39 Check angles 01:04:39 SkyScan query 01:04:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.05<-8530 Statuses=0008 0009 01:04:39 Msec=3750 True Az=40.995 Ze=52.05 Az status=0008 Ze status=0009 01:04:39 Check angles 01:04:39 SkyScan query 01:04:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:04:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:04:40 Message to Master queued w/err=0: serial=125741 error=0 01:04:45 Received message from Master: op=Filter serial=125742 01:04:45 Color wheel filter change from 0 to 0 01:04:45 FLIGetFilterPos err=0 currentPosition=0 01:04:45 FLIGetStepsRemaining err=0 RemainingSteps=0 01:04:45 Filter is already there-color wheel unchanged 01:04:45 Received message from Master: op=Shutter serial=125743 01:04:45 Shutter LASER close 01:04:45 Received message from Camera: op=State serial=125745 01:04:45 GetSingleValue result=40 Value=cccccccc 01:04:45 SkyScan query 01:04:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:04:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:46 Parameters OK 01:04:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:46 Set A/D data flow result=40 01:04:46 Set A/D channel type result=40 01:04:46 Set A/D encoding result=40 01:04:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:46 Set channel filter=0.000000e+000 result=40 01:04:46 Config A/D Result=40 01:04:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:46 Get A/D filter: -9.255963e+061 result=40 01:04:46 Get A/D value=-858993460 result=40 01:04:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:46 Parameters OK 01:04:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:46 Set A/D data flow result=40 01:04:46 Set A/D channel type result=40 01:04:46 Set A/D encoding result=40 01:04:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:46 Set channel filter=0.000000e+000 result=40 01:04:46 Config A/D Result=40 01:04:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:46 Get A/D filter: -9.255963e+061 result=40 01:04:46 Get A/D value=-858993460 result=40 01:04:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:04:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:04:46 Aux= 01:04:46 Message to Camera, serial 125745 queued 01:05:23 Received message from Master: op=PointingHead serial=125758 01:05:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:05:23 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:05:23 Point started: ret=0 01:05:23 point_skyscan result=0 01:05:24 Check angles 01:05:24 SkyScan query 01:05:25 SkyScan query done: ret=0 az=40.995<-2733 ze=21.3<-10580 Statuses=0008 0009 01:05:25 Msec=0 True Az=40.995 Ze=21.3 Az status=0008 Ze status=0009 01:05:25 Check angles 01:05:25 SkyScan query 01:05:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.195<-12013 Statuses=0008 0009 01:05:25 Msec=750 True Az=40.995 Ze=-0.195 Az status=0008 Ze status=0009 01:05:26 Check angles 01:05:26 SkyScan query 01:05:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.045<-13403 Statuses=0008 0009 01:05:26 Msec=1500 True Az=40.995 Ze=-21.045 Az status=0008 Ze status=0009 01:05:26 Check angles 01:05:26 SkyScan query 01:05:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 01:05:27 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 01:05:27 Check angles 01:05:27 SkyScan query 01:05:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:05:28 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:05:28 Message to Master queued w/err=0: serial=125758 error=0 01:05:33 Received message from Master: op=Filter serial=125759 01:05:33 Color wheel filter change from 0 to 0 01:05:33 FLIGetFilterPos err=0 currentPosition=0 01:05:33 FLIGetStepsRemaining err=0 RemainingSteps=0 01:05:33 Filter is already there-color wheel unchanged 01:05:33 Received message from Master: op=Shutter serial=125760 01:05:33 Shutter LASER close 01:05:33 Received message from Camera: op=State serial=125762 01:05:33 GetSingleValue result=40 Value=cccccccc 01:05:33 SkyScan query 01:05:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:05:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:33 Parameters OK 01:05:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:33 Set A/D data flow result=40 01:05:33 Set A/D channel type result=40 01:05:33 Set A/D encoding result=40 01:05:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:33 Set channel filter=0.000000e+000 result=40 01:05:33 Config A/D Result=40 01:05:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:33 Get A/D filter: -9.255963e+061 result=40 01:05:33 Get A/D value=-858993460 result=40 01:05:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:33 Parameters OK 01:05:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:33 Set A/D data flow result=40 01:05:33 Set A/D channel type result=40 01:05:33 Set A/D encoding result=40 01:05:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:33 Set channel filter=0.000000e+000 result=40 01:05:33 Config A/D Result=40 01:05:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:33 Get A/D filter: -9.255963e+061 result=40 01:05:33 Get A/D value=-858993460 result=40 01:05:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:05:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:05:33 Aux= 01:05:33 Message to Camera, serial 125762 queued 01:06:09 Received message from Master: op=PointingHead serial=125774 01:06:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:06:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:06:10 Point started: ret=0 01:06:10 point_skyscan result=0 01:06:10 Check angles 01:06:10 SkyScan query 01:06:11 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.265<-16551 Statuses=0009 0009 01:06:11 Msec=0 True Az=63.84 Ze=-68.265 Az status=0009 Ze status=0009 01:06:11 Check angles 01:06:11 SkyScan query 01:06:12 SkyScan query done: ret=0 az=81.765<-5451 ze=-89.7<-17980 Statuses=0009 0009 01:06:12 Msec=750 True Az=81.765 Ze=-89.7 Az status=0009 Ze status=0009 01:06:12 Check angles 01:06:12 SkyScan query [UTC 2018-12-14 01:06:13] 01:06:13 SkyScan query done: ret=0 az=99.27<-6618 ze=-110.67<-19378 Statuses=0009 0009 01:06:13 Msec=1500 True Az=99.27 Ze=-110.67 Az status=0009 Ze status=0009 01:06:13 Check angles 01:06:13 SkyScan query 01:06:13 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.595<-20773 Statuses=0009 0009 01:06:13 Msec=2250 True Az=116.775 Ze=-131.595 Az status=0009 Ze status=0009 01:06:13 Check angles 01:06:13 SkyScan query 01:06:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 01:06:14 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 01:06:14 Check angles 01:06:14 SkyScan query 01:06:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 01:06:15 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 01:06:15 Message to Master queued w/err=0: serial=125774 error=0 01:06:20 Received message from Master: op=Filter serial=125775 01:06:20 Color wheel filter change from 0 to 0 01:06:20 FLIGetFilterPos err=0 currentPosition=0 01:06:20 FLIGetStepsRemaining err=0 RemainingSteps=0 01:06:20 Filter is already there-color wheel unchanged 01:06:20 Received message from Master: op=Shutter serial=125776 01:06:20 Shutter LASER close 01:06:20 Received message from Camera: op=State serial=125778 01:06:20 GetSingleValue result=40 Value=cccccccc 01:06:20 SkyScan query 01:06:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:06:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:06:21 Parameters OK 01:06:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:06:21 Set A/D data flow result=40 01:06:21 Set A/D channel type result=40 01:06:21 Set A/D encoding result=40 01:06:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:06:21 Set channel filter=0.000000e+000 result=40 01:06:21 Config A/D Result=40 01:06:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:06:21 Get A/D filter: -9.255963e+061 result=40 01:06:21 Get A/D value=-858993460 result=40 01:06:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:06:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:06:21 Parameters OK 01:06:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:06:21 Set A/D data flow result=40 01:06:21 Set A/D channel type result=40 01:06:21 Set A/D encoding result=40 01:06:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:06:21 Set channel filter=0.000000e+000 result=40 01:06:21 Config A/D Result=40 01:06:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:06:21 Get A/D filter: -9.255963e+061 result=40 01:06:21 Get A/D value=-858993460 result=40 01:06:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:06:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:06:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:06:21 Aux= 01:06:21 Message to Camera, serial 125778 queued 01:06:57 Received message from Master: op=PointingHead serial=125791 01:06:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:06:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:06:58 Point started: ret=0 01:06:58 point_skyscan result=0 01:06:58 Check angles 01:06:58 SkyScan query 01:06:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 01:06:59 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 01:06:59 Check angles 01:06:59 SkyScan query 01:07:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:07:00 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:07:00 Message to Master queued w/err=0: serial=125791 error=0 01:07:05 Received message from Master: op=Filter serial=125792 01:07:05 Color wheel filter change from 0 to 0 01:07:05 FLIGetFilterPos err=0 currentPosition=0 01:07:05 FLIGetStepsRemaining err=0 RemainingSteps=0 01:07:05 Filter is already there-color wheel unchanged 01:07:05 Received message from Master: op=Shutter serial=125793 01:07:05 Shutter LASER open 01:07:05 Received message from Camera: op=State serial=125795 01:07:05 GetSingleValue result=40 Value=cccccccc 01:07:05 SkyScan query 01:07:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:07:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:06 Parameters OK 01:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:06 Set A/D data flow result=40 01:07:06 Set A/D channel type result=40 01:07:06 Set A/D encoding result=40 01:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:06 Set channel filter=0.000000e+000 result=40 01:07:06 Config A/D Result=40 01:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:06 Get A/D filter: -9.255963e+061 result=40 01:07:06 Get A/D value=-858993460 result=40 01:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:06 Parameters OK 01:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:06 Set A/D data flow result=40 01:07:06 Set A/D channel type result=40 01:07:06 Set A/D encoding result=40 01:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:06 Set channel filter=0.000000e+000 result=40 01:07:06 Config A/D Result=40 01:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:06 Get A/D filter: -9.255963e+061 result=40 01:07:06 Get A/D value=-858993460 result=40 01:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:07:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:07:06 Aux= 01:07:06 Message to Camera, serial 125795 queued 01:07:14 Received message from Master: op=Shutter serial=125805 01:07:14 Shutter LASER close 01:07:15 Received message from Master: op=PointingHead serial=125809 01:07:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:07:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:07:15 Point started: ret=0 01:07:15 point_skyscan result=0 01:07:16 Check angles 01:07:16 SkyScan query 01:07:16 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.74<-21516 Statuses=0009 0009 01:07:16 Msec=0 True Az=136.38 Ze=-142.74 Az status=0009 Ze status=0009 01:07:17 Check angles 01:07:17 SkyScan query 01:07:17 SkyScan query done: ret=0 az=154.26<-10284 ze=-121.425<-20095 Statuses=0009 0009 01:07:17 Msec=750 True Az=154.26 Ze=-121.425 Az status=0009 Ze status=0009 01:07:17 Check angles 01:07:17 SkyScan query 01:07:18 SkyScan query done: ret=0 az=171.78<-11452 ze=-100.35<-18690 Statuses=0009 0009 01:07:18 Msec=1500 True Az=171.78 Ze=-100.35 Az status=0009 Ze status=0009 01:07:18 Check angles 01:07:18 SkyScan query 01:07:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.455<-17297 Statuses=0008 0009 01:07:19 Msec=2250 True Az=176.01 Ze=-79.455 Az status=0008 Ze status=0009 01:07:19 Check angles 01:07:19 SkyScan query 01:07:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.05<-15870 Statuses=0008 0009 01:07:19 Msec=3000 True Az=176.01 Ze=-58.05 Az status=0008 Ze status=0009 01:07:20 Check angles 01:07:20 SkyScan query 01:07:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 01:07:20 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 01:07:20 Message to Master queued w/err=0: serial=125809 error=0 01:07:25 Received message from Master: op=Filter serial=125810 01:07:25 Color wheel filter change from 0 to 0 01:07:25 FLIGetFilterPos err=0 currentPosition=0 01:07:25 FLIGetStepsRemaining err=0 RemainingSteps=0 01:07:25 Filter is already there-color wheel unchanged 01:07:25 Received message from Master: op=Shutter serial=125811 01:07:25 Shutter LASER close 01:07:26 Received message from Camera: op=State serial=125813 01:07:26 GetSingleValue result=40 Value=cccccccc 01:07:26 SkyScan query 01:07:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:07:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:26 Parameters OK 01:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:26 Set A/D data flow result=40 01:07:26 Set A/D channel type result=40 01:07:26 Set A/D encoding result=40 01:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:26 Set channel filter=0.000000e+000 result=40 01:07:26 Config A/D Result=40 01:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:26 Get A/D filter: -9.255963e+061 result=40 01:07:26 Get A/D value=-858993460 result=40 01:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:26 Parameters OK 01:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:26 Set A/D data flow result=40 01:07:26 Set A/D channel type result=40 01:07:26 Set A/D encoding result=40 01:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:26 Set channel filter=0.000000e+000 result=40 01:07:26 Config A/D Result=40 01:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:26 Get A/D filter: -9.255963e+061 result=40 01:07:26 Get A/D value=-858993460 result=40 01:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:07:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:07:26 Aux= 01:07:26 Message to Camera, serial 125813 queued 01:08:03 Received message from Master: op=PointingHead serial=125826 01:08:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:08:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:08:03 Point started: ret=0 01:08:03 point_skyscan result=0 01:08:04 Check angles 01:08:04 SkyScan query 01:08:05 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.495<-13433 Statuses=0009 0009 01:08:05 Msec=0 True Az=152.655 Ze=-21.495 Az status=0009 Ze status=0009 01:08:05 Check angles 01:08:05 SkyScan query 01:08:05 SkyScan query done: ret=0 az=134.76<-8984 ze=-0.105<-12007 Statuses=0009 0009 01:08:05 Msec=750 True Az=134.76 Ze=-0.105 Az status=0009 Ze status=0009 01:08:06 Check angles 01:08:06 SkyScan query 01:08:06 SkyScan query done: ret=0 az=117.345<-7823 ze=20.865<-10609 Statuses=0009 0009 01:08:06 Msec=1500 True Az=117.345 Ze=20.865 Az status=0009 Ze status=0009 01:08:06 Check angles 01:08:06 SkyScan query 01:08:07 SkyScan query done: ret=0 az=99.945<-6663 ze=41.82<-9212 Statuses=0009 0009 01:08:07 Msec=2250 True Az=99.945 Ze=41.82 Az status=0009 Ze status=0009 01:08:07 Check angles 01:08:07 SkyScan query 01:08:08 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 01:08:08 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 01:08:08 Check angles 01:08:08 SkyScan query 01:08:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:08:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:08:08 Message to Master queued w/err=0: serial=125826 error=0 01:08:13 Received message from Master: op=Filter serial=125827 01:08:13 Color wheel filter change from 0 to 0 01:08:13 FLIGetFilterPos err=0 currentPosition=0 01:08:13 FLIGetStepsRemaining err=0 RemainingSteps=0 01:08:13 Filter is already there-color wheel unchanged 01:08:14 Received message from Master: op=Shutter serial=125828 01:08:14 Shutter LASER close 01:08:14 Received message from Camera: op=State serial=125830 01:08:14 GetSingleValue result=40 Value=cccccccc 01:08:14 SkyScan query 01:08:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:08:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:14 Parameters OK 01:08:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:14 Set A/D data flow result=40 01:08:14 Set A/D channel type result=40 01:08:14 Set A/D encoding result=40 01:08:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:14 Set channel filter=0.000000e+000 result=40 01:08:14 Config A/D Result=40 01:08:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:14 Get A/D filter: -9.255963e+061 result=40 01:08:14 Get A/D value=-858993460 result=40 01:08:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:14 Parameters OK 01:08:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:14 Set A/D data flow result=40 01:08:14 Set A/D channel type result=40 01:08:14 Set A/D encoding result=40 01:08:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:14 Set channel filter=0.000000e+000 result=40 01:08:14 Config A/D Result=40 01:08:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:14 Get A/D filter: -9.255963e+061 result=40 01:08:14 Get A/D value=-858993460 result=40 01:08:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:08:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:08:14 Aux= 01:08:14 Message to Camera, serial 125830 queued 01:08:51 Received message from Master: op=PointingHead serial=125843 01:08:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:08:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:08:51 Point started: ret=0 01:08:51 point_skyscan result=0 01:08:52 Check angles 01:08:52 SkyScan query 01:08:53 SkyScan query done: ret=0 az=109.35<-7290 ze=38.49<-9434 Statuses=0009 0008 01:08:53 Msec=0 True Az=109.35 Ze=38.49 Az status=0009 Ze status=0008 01:08:53 Check angles 01:08:53 SkyScan query 01:08:54 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 01:08:54 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 01:08:54 Check angles 01:08:54 SkyScan query 01:08:54 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 01:08:54 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 01:08:54 Check angles 01:08:54 SkyScan query 01:08:55 SkyScan query done: ret=0 az=161.625<-10775 ze=38.505<-9433 Statuses=0009 0008 01:08:55 Msec=2250 True Az=161.625 Ze=38.505 Az status=0009 Ze status=0008 01:08:55 Check angles 01:08:55 SkyScan query 01:08:56 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:08:56 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:08:56 Check angles 01:08:56 SkyScan query 01:08:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:08:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:08:57 Message to Master queued w/err=0: serial=125843 error=0 01:09:02 Received message from Master: op=Filter serial=125844 01:09:02 Color wheel filter change from 0 to 0 01:09:02 FLIGetFilterPos err=0 currentPosition=0 01:09:02 FLIGetStepsRemaining err=0 RemainingSteps=0 01:09:02 Filter is already there-color wheel unchanged 01:09:02 Received message from Master: op=Shutter serial=125845 01:09:02 Shutter LASER close 01:09:02 Received message from Camera: op=State serial=125847 01:09:02 GetSingleValue result=40 Value=cccccccc 01:09:02 SkyScan query 01:09:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:09:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:09:02 Parameters OK 01:09:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:09:02 Set A/D data flow result=40 01:09:02 Set A/D channel type result=40 01:09:02 Set A/D encoding result=40 01:09:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:09:02 Set channel filter=0.000000e+000 result=40 01:09:02 Config A/D Result=40 01:09:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:09:02 Get A/D filter: -9.255963e+061 result=40 01:09:02 Get A/D value=-858993460 result=40 01:09:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:09:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:09:02 Parameters OK 01:09:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:09:02 Set A/D data flow result=40 01:09:02 Set A/D channel type result=40 01:09:02 Set A/D encoding result=40 01:09:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:09:02 Set channel filter=0.000000e+000 result=40 01:09:02 Config A/D Result=40 01:09:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:09:02 Get A/D filter: -9.255963e+061 result=40 01:09:02 Get A/D value=-858993460 result=40 01:09:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:09:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:09:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:09:02 Aux= 01:09:02 Message to Camera, serial 125847 queued 01:09:39 Received message from Master: op=PointingHead serial=125860 01:09:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:09:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:09:39 Point started: ret=0 01:09:39 point_skyscan result=0 01:09:40 Check angles 01:09:40 SkyScan query 01:09:41 SkyScan query done: ret=0 az=152.655<-10177 ze=8.28<-11448 Statuses=0009 0009 01:09:41 Msec=0 True Az=152.655 Ze=8.28 Az status=0009 Ze status=0009 01:09:41 Check angles 01:09:41 SkyScan query 01:09:42 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.645<-12843 Statuses=0009 0009 01:09:42 Msec=750 True Az=135.135 Ze=-12.645 Az status=0009 Ze status=0009 01:09:42 Check angles 01:09:42 SkyScan query 01:09:42 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.615<-14241 Statuses=0009 0009 01:09:42 Msec=1500 True Az=117.57 Ze=-33.615 Az status=0009 Ze status=0009 01:09:42 Check angles 01:09:42 SkyScan query 01:09:43 SkyScan query done: ret=0 az=100.32<-6688 ze=-51.555<-15437 Statuses=0009 0009 01:09:43 Msec=2250 True Az=100.32 Ze=-51.555 Az status=0009 Ze status=0009 01:09:43 Check angles 01:09:43 SkyScan query 01:09:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 01:09:44 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 01:09:44 Check angles 01:09:44 SkyScan query 01:09:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:09:45 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:09:45 Message to Master queued w/err=0: serial=125860 error=0 01:09:50 Received message from Master: op=Filter serial=125861 01:09:50 Color wheel filter change from 0 to 0 01:09:50 FLIGetFilterPos err=0 currentPosition=0 01:09:50 FLIGetStepsRemaining err=0 RemainingSteps=0 01:09:50 Filter is already there-color wheel unchanged 01:09:50 Received message from Master: op=Shutter serial=125862 01:09:50 Shutter LASER close 01:09:50 Received message from Camera: op=State serial=125864 01:09:50 GetSingleValue result=40 Value=cccccccc 01:09:50 SkyScan query 01:09:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:09:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:09:50 Parameters OK 01:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:09:50 Set A/D data flow result=40 01:09:50 Set A/D channel type result=40 01:09:50 Set A/D encoding result=40 01:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:09:50 Set channel filter=0.000000e+000 result=40 01:09:50 Config A/D Result=40 01:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:09:50 Get A/D filter: -9.255963e+061 result=40 01:09:50 Get A/D value=-858993460 result=40 01:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:09:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:09:50 Parameters OK 01:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:09:50 Set A/D data flow result=40 01:09:50 Set A/D channel type result=40 01:09:50 Set A/D encoding result=40 01:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:09:50 Set channel filter=0.000000e+000 result=40 01:09:50 Config A/D Result=40 01:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:09:50 Get A/D filter: -9.255963e+061 result=40 01:09:50 Get A/D value=-858993460 result=40 01:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:09:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:09:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:09:50 Aux= 01:09:50 Message to Camera, serial 125864 queued 01:10:27 Received message from Master: op=PointingHead serial=125877 01:10:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:10:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:10:28 Point started: ret=0 01:10:28 point_skyscan result=0 01:10:28 Check angles 01:10:28 SkyScan query 01:10:29 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.42<-17428 Statuses=0009 0009 01:10:29 Msec=0 True Az=109.17 Ze=-81.42 Az status=0009 Ze status=0009 01:10:29 Check angles 01:10:29 SkyScan query 01:10:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 01:10:30 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 01:10:30 Check angles 01:10:30 SkyScan query 01:10:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.78<-20252 Statuses=0008 0009 01:10:30 Msec=1500 True Az=112.995 Ze=-123.78 Az status=0008 Ze status=0009 01:10:31 Check angles 01:10:31 SkyScan query 01:10:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 01:10:31 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 01:10:31 Check angles 01:10:31 SkyScan query 01:10:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.66<-23044 Statuses=0008 0009 01:10:32 Msec=3000 True Az=112.995 Ze=-165.66 Az status=0008 Ze status=0009 01:10:32 Check angles 01:10:32 SkyScan query 01:10:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:10:33 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:10:33 Message to Master queued w/err=0: serial=125877 error=0 01:10:38 Received message from Master: op=Filter serial=125878 01:10:38 Color wheel filter change from 0 to 0 01:10:38 FLIGetFilterPos err=0 currentPosition=0 01:10:38 FLIGetStepsRemaining err=0 RemainingSteps=0 01:10:38 Filter is already there-color wheel unchanged 01:10:38 Received message from Master: op=Shutter serial=125879 01:10:38 Shutter LASER open 01:10:38 Received message from Camera: op=State serial=125881 01:10:38 GetSingleValue result=40 Value=cccccccc 01:10:38 SkyScan query 01:10:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:10:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:39 Parameters OK 01:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:39 Set A/D data flow result=40 01:10:39 Set A/D channel type result=40 01:10:39 Set A/D encoding result=40 01:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:39 Set channel filter=0.000000e+000 result=40 01:10:39 Config A/D Result=40 01:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:39 Get A/D filter: -9.255963e+061 result=40 01:10:39 Get A/D value=-858993460 result=40 01:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:39 Parameters OK 01:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:39 Set A/D data flow result=40 01:10:39 Set A/D channel type result=40 01:10:39 Set A/D encoding result=40 01:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:39 Set channel filter=0.000000e+000 result=40 01:10:39 Config A/D Result=40 01:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:39 Get A/D filter: -9.255963e+061 result=40 01:10:39 Get A/D value=-858993460 result=40 01:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:10:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:10:39 Aux= 01:10:39 Message to Camera, serial 125881 queued 01:10:47 Received message from Master: op=Shutter serial=125891 01:10:47 Shutter LASER close 01:10:48 Received message from Master: op=PointingHead serial=125895 01:10:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:10:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:10:48 Point started: ret=0 01:10:48 point_skyscan result=0 01:10:49 Check angles 01:10:49 SkyScan query 01:10:49 SkyScan query done: ret=0 az=89.85<-5990 ze=157.26<-1516 Statuses=0009 0009 01:10:49 Msec=0 True Az=89.85 Ze=157.26 Az status=0009 Ze status=0009 01:10:49 Check angles 01:10:49 SkyScan query 01:10:50 SkyScan query done: ret=0 az=72<-4800 ze=135.84<-2944 Statuses=0009 0009 01:10:50 Msec=750 True Az=72 Ze=135.84 Az status=0009 Ze status=0009 01:10:50 Check angles 01:10:50 SkyScan query 01:10:51 SkyScan query done: ret=0 az=54.405<-3627 ze=114.42<-4372 Statuses=0009 0009 01:10:51 Msec=1500 True Az=54.405 Ze=114.42 Az status=0009 Ze status=0009 01:10:51 Check angles 01:10:51 SkyScan query 01:10:52 SkyScan query done: ret=0 az=40.98<-2732 ze=93.51<-5766 Statuses=0009 0009 01:10:52 Msec=2250 True Az=40.98 Ze=93.51 Az status=0009 Ze status=0009 01:10:52 Check angles 01:10:52 SkyScan query 01:10:52 SkyScan query done: ret=0 az=40.995<-2733 ze=72.51<-7166 Statuses=0008 0009 01:10:52 Msec=3000 True Az=40.995 Ze=72.51 Az status=0008 Ze status=0009 01:10:52 Check angles 01:10:52 SkyScan query 01:10:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 01:10:53 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 01:10:53 Check angles 01:10:53 SkyScan query 01:10:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:10:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:10:54 Message to Master queued w/err=0: serial=125895 error=0 01:10:59 Received message from Master: op=Filter serial=125896 01:10:59 Color wheel filter change from 0 to 0 01:10:59 FLIGetFilterPos err=0 currentPosition=0 01:10:59 FLIGetStepsRemaining err=0 RemainingSteps=0 01:10:59 Filter is already there-color wheel unchanged 01:10:59 Received message from Master: op=Shutter serial=125897 01:10:59 Shutter LASER close 01:10:59 Received message from Camera: op=State serial=125899 01:10:59 GetSingleValue result=40 Value=cccccccc 01:10:59 SkyScan query 01:11:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:11:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:00 Parameters OK 01:11:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:00 Set A/D data flow result=40 01:11:00 Set A/D channel type result=40 01:11:00 Set A/D encoding result=40 01:11:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:00 Set channel filter=0.000000e+000 result=40 01:11:00 Config A/D Result=40 01:11:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:00 Get A/D filter: -9.255963e+061 result=40 01:11:00 Get A/D value=-858993460 result=40 01:11:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:00 Parameters OK 01:11:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:00 Set A/D data flow result=40 01:11:00 Set A/D channel type result=40 01:11:00 Set A/D encoding result=40 01:11:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:00 Set channel filter=0.000000e+000 result=40 01:11:00 Config A/D Result=40 01:11:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:00 Get A/D filter: -9.255963e+061 result=40 01:11:00 Get A/D value=-858993460 result=40 01:11:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:11:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:11:00 Aux= 01:11:00 Message to Camera, serial 125899 queued 01:11:37 Received message from Master: op=PointingHead serial=125912 01:11:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:11:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:11:37 Point started: ret=0 01:11:37 point_skyscan result=0 01:11:38 Check angles 01:11:38 SkyScan query 01:11:38 SkyScan query done: ret=0 az=40.995<-2733 ze=21.615<-10559 Statuses=0008 0009 01:11:38 Msec=0 True Az=40.995 Ze=21.615 Az status=0008 Ze status=0009 01:11:39 Check angles 01:11:39 SkyScan query 01:11:39 SkyScan query done: ret=0 az=40.995<-2733 ze=0.705<-11953 Statuses=0008 0009 01:11:39 Msec=750 True Az=40.995 Ze=0.705 Az status=0008 Ze status=0009 01:11:39 Check angles 01:11:39 SkyScan query 01:11:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.685<-13379 Statuses=0008 0009 01:11:40 Msec=1500 True Az=40.995 Ze=-20.685 Az status=0008 Ze status=0009 01:11:40 Check angles 01:11:40 SkyScan query 01:11:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 01:11:41 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 01:11:41 Check angles 01:11:41 SkyScan query 01:11:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:11:41 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:11:41 Message to Master queued w/err=0: serial=125912 error=0 01:11:46 Received message from Master: op=Filter serial=125913 01:11:46 Color wheel filter change from 0 to 0 01:11:46 FLIGetFilterPos err=0 currentPosition=0 01:11:46 FLIGetStepsRemaining err=0 RemainingSteps=0 01:11:46 Filter is already there-color wheel unchanged 01:11:47 Received message from Master: op=Shutter serial=125914 01:11:47 Shutter LASER close 01:11:47 Received message from Camera: op=State serial=125916 01:11:47 GetSingleValue result=40 Value=cccccccc 01:11:47 SkyScan query 01:11:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:11:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:47 Parameters OK 01:11:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:47 Set A/D data flow result=40 01:11:47 Set A/D channel type result=40 01:11:47 Set A/D encoding result=40 01:11:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:47 Set channel filter=0.000000e+000 result=40 01:11:47 Config A/D Result=40 01:11:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:47 Get A/D filter: -9.255963e+061 result=40 01:11:47 Get A/D value=-858993460 result=40 01:11:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:47 Parameters OK 01:11:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:47 Set A/D data flow result=40 01:11:47 Set A/D channel type result=40 01:11:47 Set A/D encoding result=40 01:11:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:47 Set channel filter=0.000000e+000 result=40 01:11:47 Config A/D Result=40 01:11:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:47 Get A/D filter: -9.255963e+061 result=40 01:11:47 Get A/D value=-858993460 result=40 01:11:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:11:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:11:47 Aux= 01:11:47 Message to Camera, serial 125916 queued 01:12:24 Received message from Master: op=PointingHead serial=125929 01:12:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:12:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:12:24 Point started: ret=0 01:12:24 point_skyscan result=0 01:12:25 Check angles 01:12:25 SkyScan query 01:12:26 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.22<-16548 Statuses=0009 0009 01:12:26 Msec=0 True Az=64.065 Ze=-68.22 Az status=0009 Ze status=0009 01:12:26 Check angles 01:12:26 SkyScan query 01:12:26 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.64<-17976 Statuses=0009 0009 01:12:26 Msec=750 True Az=81.84 Ze=-89.64 Az status=0009 Ze status=0009 01:12:27 Check angles 01:12:27 SkyScan query 01:12:27 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.625<-19375 Statuses=0009 0009 01:12:27 Msec=1500 True Az=99.375 Ze=-110.625 Az status=0009 Ze status=0009 01:12:27 Check angles 01:12:27 SkyScan query 01:12:28 SkyScan query done: ret=0 az=117<-7800 ze=-131.535<-20769 Statuses=0009 0009 01:12:28 Msec=2250 True Az=117 Ze=-131.535 Az status=0009 Ze status=0009 01:12:28 Check angles 01:12:28 SkyScan query 01:12:29 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 01:12:29 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 01:12:29 Check angles 01:12:29 SkyScan query 01:12:29 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:12:29 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:12:29 Message to Master queued w/err=0: serial=125929 error=0 01:12:34 Received message from Master: op=Filter serial=125930 01:12:34 Color wheel filter change from 0 to 0 01:12:34 FLIGetFilterPos err=0 currentPosition=0 01:12:34 FLIGetStepsRemaining err=0 RemainingSteps=0 01:12:34 Filter is already there-color wheel unchanged 01:12:35 Received message from Master: op=Shutter serial=125931 01:12:35 Shutter LASER close 01:12:35 Received message from Camera: op=State serial=125933 01:12:35 GetSingleValue result=40 Value=cccccccc 01:12:35 SkyScan query 01:12:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:12:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:12:35 Parameters OK 01:12:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:12:35 Set A/D data flow result=40 01:12:35 Set A/D channel type result=40 01:12:35 Set A/D encoding result=40 01:12:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:12:35 Set channel filter=0.000000e+000 result=40 01:12:35 Config A/D Result=40 01:12:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:12:35 Get A/D filter: -9.255963e+061 result=40 01:12:35 Get A/D value=-858993460 result=40 01:12:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:12:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:12:35 Parameters OK 01:12:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:12:35 Set A/D data flow result=40 01:12:35 Set A/D channel type result=40 01:12:35 Set A/D encoding result=40 01:12:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:12:35 Set channel filter=0.000000e+000 result=40 01:12:35 Config A/D Result=40 01:12:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:12:35 Get A/D filter: -9.255963e+061 result=40 01:12:35 Get A/D value=-858993460 result=40 01:12:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:12:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:12:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:12:35 Aux= 01:12:35 Message to Camera, serial 125933 queued 01:13:12 Received message from Master: op=PointingHead serial=125946 01:13:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:13:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:13:12 Point started: ret=0 01:13:12 point_skyscan result=0 01:13:13 Check angles 01:13:13 SkyScan query 01:13:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0008 0009 01:13:14 Msec=0 True Az=112.995 Ze=-171.495 Az status=0008 Ze status=0009 01:13:14 Check angles 01:13:14 SkyScan query 01:13:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:13:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:13:15 Message to Master queued w/err=0: serial=125946 error=0 01:13:20 Received message from Master: op=Filter serial=125947 01:13:20 Color wheel filter change from 0 to 0 01:13:20 FLIGetFilterPos err=0 currentPosition=0 01:13:20 FLIGetStepsRemaining err=0 RemainingSteps=0 01:13:20 Filter is already there-color wheel unchanged 01:13:20 Received message from Master: op=Shutter serial=125948 01:13:20 Shutter LASER open 01:13:20 Received message from Camera: op=State serial=125950 01:13:20 GetSingleValue result=40 Value=cccccccc 01:13:20 SkyScan query 01:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:13:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:20 Parameters OK 01:13:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:20 Set A/D data flow result=40 01:13:20 Set A/D channel type result=40 01:13:20 Set A/D encoding result=40 01:13:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:20 Set channel filter=0.000000e+000 result=40 01:13:20 Config A/D Result=40 01:13:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:20 Get A/D filter: -9.255963e+061 result=40 01:13:20 Get A/D value=-858993460 result=40 01:13:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:20 Parameters OK 01:13:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:20 Set A/D data flow result=40 01:13:20 Set A/D channel type result=40 01:13:20 Set A/D encoding result=40 01:13:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:20 Set channel filter=0.000000e+000 result=40 01:13:20 Config A/D Result=40 01:13:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:20 Get A/D filter: -9.255963e+061 result=40 01:13:20 Get A/D value=-858993460 result=40 01:13:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:13:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:13:20 Aux= 01:13:20 Message to Camera, serial 125950 queued 01:13:29 Received message from Master: op=Shutter serial=125960 01:13:29 Shutter LASER close 01:13:30 Received message from Master: op=PointingHead serial=125964 01:13:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:13:30 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:13:30 Point started: ret=0 01:13:30 point_skyscan result=0 01:13:31 Check angles 01:13:31 SkyScan query 01:13:31 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.52<-21568 Statuses=0009 0009 01:13:31 Msec=0 True Az=135.75 Ze=-143.52 Az status=0009 Ze status=0009 01:13:31 Check angles 01:13:31 SkyScan query 01:13:32 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.565<-20171 Statuses=0009 0009 01:13:32 Msec=750 True Az=153.225 Ze=-122.565 Az status=0009 Ze status=0009 01:13:32 Check angles 01:13:32 SkyScan query 01:13:33 SkyScan query done: ret=0 az=170.745<-11383 ze=-101.655<-18777 Statuses=0009 0009 01:13:33 Msec=1500 True Az=170.745 Ze=-101.655 Az status=0009 Ze status=0009 01:13:33 Check angles 01:13:33 SkyScan query 01:13:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.595<-17373 Statuses=0008 0009 01:13:33 Msec=2250 True Az=176.01 Ze=-80.595 Az status=0008 Ze status=0009 01:13:34 Check angles 01:13:34 SkyScan query 01:13:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.685<-15979 Statuses=0008 0009 01:13:34 Msec=3000 True Az=176.01 Ze=-59.685 Az status=0008 Ze status=0009 01:13:34 Check angles 01:13:34 SkyScan query 01:13:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:13:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:13:35 Message to Master queued w/err=0: serial=125964 error=0 01:13:40 Received message from Master: op=Filter serial=125965 01:13:40 Color wheel filter change from 0 to 0 01:13:40 FLIGetFilterPos err=0 currentPosition=0 01:13:40 FLIGetStepsRemaining err=0 RemainingSteps=0 01:13:40 Filter is already there-color wheel unchanged 01:13:40 Received message from Master: op=Shutter serial=125966 01:13:40 Shutter LASER close 01:13:40 Received message from Camera: op=State serial=125968 01:13:40 GetSingleValue result=40 Value=cccccccc 01:13:40 SkyScan query 01:13:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:13:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:41 Parameters OK 01:13:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:41 Set A/D data flow result=40 01:13:41 Set A/D channel type result=40 01:13:41 Set A/D encoding result=40 01:13:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:41 Set channel filter=0.000000e+000 result=40 01:13:41 Config A/D Result=40 01:13:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:41 Get A/D filter: -9.255963e+061 result=40 01:13:41 Get A/D value=-858993460 result=40 01:13:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:41 Parameters OK 01:13:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:41 Set A/D data flow result=40 01:13:41 Set A/D channel type result=40 01:13:41 Set A/D encoding result=40 01:13:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:41 Set channel filter=0.000000e+000 result=40 01:13:41 Config A/D Result=40 01:13:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:41 Get A/D filter: -9.255963e+061 result=40 01:13:41 Get A/D value=-858993460 result=40 01:13:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:13:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:13:41 Aux= 01:13:41 Message to Camera, serial 125968 queued 01:14:17 Received message from Master: op=PointingHead serial=125980 01:14:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:14:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:14:17 Point started: ret=0 01:14:17 point_skyscan result=0 01:14:18 Check angles 01:14:18 SkyScan query 01:14:18 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.69<-13446 Statuses=0009 0009 01:14:18 Msec=0 True Az=152.985 Ze=-21.69 Az status=0009 Ze status=0009 01:14:19 Check angles 01:14:19 SkyScan query 01:14:19 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.705<-12047 Statuses=0009 0009 01:14:19 Msec=750 True Az=135.45 Ze=-0.705 Az status=0009 Ze status=0009 01:14:19 Check angles 01:14:19 SkyScan query 01:14:20 SkyScan query done: ret=0 az=117.63<-7842 ze=20.685<-10621 Statuses=0009 0009 01:14:20 Msec=1500 True Az=117.63 Ze=20.685 Az status=0009 Ze status=0009 01:14:20 Check angles 01:14:20 SkyScan query 01:14:21 SkyScan query done: ret=0 az=99.795<-6653 ze=42.06<-9196 Statuses=0009 0009 01:14:21 Msec=2250 True Az=99.795 Ze=42.06 Az status=0009 Ze status=0009 01:14:21 Check angles 01:14:21 SkyScan query 01:14:21 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 01:14:21 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 01:14:22 Check angles 01:14:22 SkyScan query 01:14:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:14:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:14:22 Message to Master queued w/err=0: serial=125980 error=0 01:14:27 Received message from Master: op=Filter serial=125981 01:14:27 Color wheel filter change from 0 to 0 01:14:27 FLIGetFilterPos err=0 currentPosition=0 01:14:27 FLIGetStepsRemaining err=0 RemainingSteps=0 01:14:27 Filter is already there-color wheel unchanged 01:14:27 Received message from Master: op=Shutter serial=125982 01:14:27 Shutter LASER close 01:14:27 Received message from Camera: op=State serial=125984 01:14:27 GetSingleValue result=40 Value=cccccccc 01:14:27 SkyScan query 01:14:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:14:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:14:28 Parameters OK 01:14:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:14:28 Set A/D data flow result=40 01:14:28 Set A/D channel type result=40 01:14:28 Set A/D encoding result=40 01:14:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:14:28 Set channel filter=0.000000e+000 result=40 01:14:28 Config A/D Result=40 01:14:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:14:28 Get A/D filter: -9.255963e+061 result=40 01:14:28 Get A/D value=-858993460 result=40 01:14:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:14:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:14:28 Parameters OK 01:14:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:14:28 Set A/D data flow result=40 01:14:28 Set A/D channel type result=40 01:14:28 Set A/D encoding result=40 01:14:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:14:28 Set channel filter=0.000000e+000 result=40 01:14:28 Config A/D Result=40 01:14:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:14:28 Get A/D filter: -9.255963e+061 result=40 01:14:28 Get A/D value=-858993460 result=40 01:14:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:14:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:14:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:14:28 Aux= 01:14:28 Message to Camera, serial 125984 queued 01:15:04 Received message from Master: op=PointingHead serial=125996 01:15:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:15:04 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:15:04 Point started: ret=0 01:15:04 point_skyscan result=0 01:15:05 Check angles 01:15:05 SkyScan query 01:15:06 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 01:15:06 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 01:15:06 Check angles 01:15:06 SkyScan query 01:15:06 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 01:15:06 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 01:15:07 Check angles 01:15:07 SkyScan query 01:15:07 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 01:15:07 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 01:15:07 Check angles 01:15:07 SkyScan query 01:15:08 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 01:15:08 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 01:15:08 Check angles 01:15:08 SkyScan query 01:15:09 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:15:09 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:15:09 Check angles 01:15:09 SkyScan query 01:15:09 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:15:09 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:15:09 Message to Master queued w/err=0: serial=125996 error=0 01:15:14 Received message from Master: op=Filter serial=125997 01:15:14 Color wheel filter change from 0 to 0 01:15:14 FLIGetFilterPos err=0 currentPosition=0 01:15:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:15:14 Filter is already there-color wheel unchanged 01:15:15 Received message from Master: op=Shutter serial=125998 01:15:15 Shutter LASER close 01:15:15 Received message from Camera: op=State serial=126000 01:15:15 GetSingleValue result=40 Value=cccccccc 01:15:15 SkyScan query 01:15:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:15:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:15 Parameters OK 01:15:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:15 Set A/D data flow result=40 01:15:15 Set A/D channel type result=40 01:15:15 Set A/D encoding result=40 01:15:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:15 Set channel filter=0.000000e+000 result=40 01:15:15 Config A/D Result=40 01:15:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:15 Get A/D filter: -9.255963e+061 result=40 01:15:15 Get A/D value=-858993460 result=40 01:15:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:15 Parameters OK 01:15:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:15 Set A/D data flow result=40 01:15:15 Set A/D channel type result=40 01:15:15 Set A/D encoding result=40 01:15:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:15 Set channel filter=0.000000e+000 result=40 01:15:15 Config A/D Result=40 01:15:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:15 Get A/D filter: -9.255963e+061 result=40 01:15:15 Get A/D value=-858993460 result=40 01:15:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:15:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:15:15 Aux= 01:15:15 Message to Camera, serial 126000 queued 01:15:27 Received message from Master: op=Identify serial=126001 01:15:52 Received message from Master: op=PointingHead serial=126016 01:15:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:15:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:15:52 Point started: ret=0 01:15:52 point_skyscan result=0 [UTC 2018-12-14 01:15:52] 01:15:53 Check angles 01:15:53 SkyScan query 01:15:54 SkyScan query done: ret=0 az=153.225<-10215 ze=8.97<-11402 Statuses=0009 0009 01:15:54 Msec=0 True Az=153.225 Ze=8.97 Az status=0009 Ze status=0009 01:15:54 Check angles 01:15:54 SkyScan query 01:15:54 SkyScan query done: ret=0 az=135.795<-9053 ze=-12.015<-12801 Statuses=0009 0009 01:15:54 Msec=750 True Az=135.795 Ze=-12.015 Az status=0009 Ze status=0009 01:15:55 Check angles 01:15:55 SkyScan query 01:15:55 SkyScan query done: ret=0 az=118.26<-7884 ze=-32.94<-14196 Statuses=0009 0009 01:15:55 Msec=1500 True Az=118.26 Ze=-32.94 Az status=0009 Ze status=0009 01:15:55 Check angles 01:15:55 SkyScan query 01:15:56 SkyScan query done: ret=0 az=100.845<-6723 ze=-51.51<-15434 Statuses=0009 0009 01:15:56 Msec=2250 True Az=100.845 Ze=-51.51 Az status=0009 Ze status=0009 01:15:56 Check angles 01:15:56 SkyScan query 01:15:57 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:15:57 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:15:57 Check angles 01:15:57 SkyScan query 01:15:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:15:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:15:57 Message to Master queued w/err=0: serial=126016 error=0 01:16:02 Received message from Master: op=Filter serial=126017 01:16:02 Color wheel filter change from 0 to 0 01:16:02 FLIGetFilterPos err=0 currentPosition=0 01:16:02 FLIGetStepsRemaining err=0 RemainingSteps=0 01:16:02 Filter is already there-color wheel unchanged 01:16:03 Received message from Master: op=Shutter serial=126018 01:16:03 Shutter LASER close 01:16:03 Received message from Camera: op=State serial=126020 01:16:03 GetSingleValue result=40 Value=cccccccc 01:16:03 SkyScan query 01:16:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:16:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:03 Parameters OK 01:16:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:03 Set A/D data flow result=40 01:16:03 Set A/D channel type result=40 01:16:03 Set A/D encoding result=40 01:16:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:03 Set channel filter=0.000000e+000 result=40 01:16:03 Config A/D Result=40 01:16:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:03 Get A/D filter: -9.255963e+061 result=40 01:16:03 Get A/D value=-858993460 result=40 01:16:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:03 Parameters OK 01:16:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:03 Set A/D data flow result=40 01:16:03 Set A/D channel type result=40 01:16:03 Set A/D encoding result=40 01:16:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:03 Set channel filter=0.000000e+000 result=40 01:16:03 Config A/D Result=40 01:16:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:03 Get A/D filter: -9.255963e+061 result=40 01:16:03 Get A/D value=-858993460 result=40 01:16:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:16:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:16:03 Aux= 01:16:03 Message to Camera, serial 126020 queued 01:16:41 Received message from Master: op=PointingHead serial=126033 01:16:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:16:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:16:41 Point started: ret=0 01:16:41 point_skyscan result=0 01:16:42 Check angles 01:16:42 SkyScan query 01:16:42 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.36<-17424 Statuses=0009 0009 01:16:42 Msec=0 True Az=109.14 Ze=-81.36 Az status=0009 Ze status=0009 01:16:43 Check angles 01:16:43 SkyScan query 01:16:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 01:16:43 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 01:16:43 Check angles 01:16:43 SkyScan query 01:16:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.735<-20249 Statuses=0008 0009 01:16:44 Msec=1500 True Az=112.995 Ze=-123.735 Az status=0008 Ze status=0009 01:16:44 Check angles 01:16:44 SkyScan query 01:16:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.705<-21647 Statuses=0008 0009 01:16:45 Msec=2250 True Az=112.995 Ze=-144.705 Az status=0008 Ze status=0009 01:16:45 Check angles 01:16:45 SkyScan query 01:16:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.17<-23078 Statuses=0008 0009 01:16:45 Msec=3000 True Az=112.995 Ze=-166.17 Az status=0008 Ze status=0009 01:16:46 Check angles 01:16:46 SkyScan query 01:16:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:16:46 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:16:46 Message to Master queued w/err=0: serial=126033 error=0 01:16:51 Received message from Master: op=Filter serial=126034 01:16:51 Color wheel filter change from 0 to 0 01:16:51 FLIGetFilterPos err=0 currentPosition=0 01:16:51 FLIGetStepsRemaining err=0 RemainingSteps=0 01:16:51 Filter is already there-color wheel unchanged 01:16:51 Received message from Master: op=Shutter serial=126035 01:16:51 Shutter LASER open 01:16:52 Received message from Camera: op=State serial=126037 01:16:52 GetSingleValue result=40 Value=cccccccc 01:16:52 SkyScan query 01:16:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:16:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:52 Parameters OK 01:16:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:52 Set A/D data flow result=40 01:16:52 Set A/D channel type result=40 01:16:52 Set A/D encoding result=40 01:16:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:52 Set channel filter=0.000000e+000 result=40 01:16:52 Config A/D Result=40 01:16:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:52 Get A/D filter: -9.255963e+061 result=40 01:16:52 Get A/D value=-858993460 result=40 01:16:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:52 Parameters OK 01:16:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:52 Set A/D data flow result=40 01:16:52 Set A/D channel type result=40 01:16:52 Set A/D encoding result=40 01:16:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:52 Set channel filter=0.000000e+000 result=40 01:16:52 Config A/D Result=40 01:16:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:52 Get A/D filter: -9.255963e+061 result=40 01:16:52 Get A/D value=-858993460 result=40 01:16:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:16:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:16:52 Aux= 01:16:52 Message to Camera, serial 126037 queued 01:17:01 Received message from Master: op=Shutter serial=126047 01:17:01 Shutter LASER close 01:17:01 Received message from Master: op=PointingHead serial=126051 01:17:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:17:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:17:01 Point started: ret=0 01:17:01 point_skyscan result=0 01:17:02 Check angles 01:17:02 SkyScan query 01:17:03 SkyScan query done: ret=0 az=89.79<-5986 ze=157.14<-1524 Statuses=0009 0009 01:17:03 Msec=0 True Az=89.79 Ze=157.14 Az status=0009 Ze status=0009 01:17:03 Check angles 01:17:03 SkyScan query 01:17:03 SkyScan query done: ret=0 az=72.27<-4818 ze=136.17<-2922 Statuses=0009 0009 01:17:03 Msec=750 True Az=72.27 Ze=136.17 Az status=0009 Ze status=0009 01:17:04 Check angles 01:17:04 SkyScan query 01:17:04 SkyScan query done: ret=0 az=54.78<-3652 ze=114.765<-4349 Statuses=0009 0009 01:17:04 Msec=1500 True Az=54.78 Ze=114.765 Az status=0009 Ze status=0009 01:17:04 Check angles 01:17:04 SkyScan query 01:17:05 SkyScan query done: ret=0 az=40.965<-2731 ze=94.275<-5715 Statuses=0009 0009 01:17:05 Msec=2250 True Az=40.965 Ze=94.275 Az status=0009 Ze status=0009 01:17:05 Check angles 01:17:05 SkyScan query 01:17:06 SkyScan query done: ret=0 az=41.01<-2734 ze=72.855<-7143 Statuses=0008 0009 01:17:06 Msec=3000 True Az=41.01 Ze=72.855 Az status=0008 Ze status=0009 01:17:06 Check angles 01:17:06 SkyScan query 01:17:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 01:17:06 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 01:17:07 Check angles 01:17:07 SkyScan query 01:17:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:17:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:17:07 Message to Master queued w/err=0: serial=126051 error=0 01:17:12 Received message from Master: op=Filter serial=126052 01:17:12 Color wheel filter change from 0 to 0 01:17:12 FLIGetFilterPos err=0 currentPosition=0 01:17:12 FLIGetStepsRemaining err=0 RemainingSteps=0 01:17:12 Filter is already there-color wheel unchanged 01:17:12 Received message from Master: op=Shutter serial=126053 01:17:12 Shutter LASER close 01:17:13 Received message from Camera: op=State serial=126055 01:17:13 GetSingleValue result=40 Value=cccccccc 01:17:13 SkyScan query 01:17:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:17:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:13 Parameters OK 01:17:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:13 Set A/D data flow result=40 01:17:13 Set A/D channel type result=40 01:17:13 Set A/D encoding result=40 01:17:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:13 Set channel filter=0.000000e+000 result=40 01:17:13 Config A/D Result=40 01:17:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:13 Get A/D filter: -9.255963e+061 result=40 01:17:13 Get A/D value=-858993460 result=40 01:17:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:13 Parameters OK 01:17:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:13 Set A/D data flow result=40 01:17:13 Set A/D channel type result=40 01:17:13 Set A/D encoding result=40 01:17:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:13 Set channel filter=0.000000e+000 result=40 01:17:13 Config A/D Result=40 01:17:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:13 Get A/D filter: -9.255963e+061 result=40 01:17:13 Get A/D value=-858993460 result=40 01:17:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:17:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:17:13 Aux= 01:17:13 Message to Camera, serial 126055 queued 01:17:50 Received message from Master: op=PointingHead serial=126068 01:17:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:17:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:17:50 Point started: ret=0 01:17:50 point_skyscan result=0 01:17:51 Check angles 01:17:51 SkyScan query 01:17:52 SkyScan query done: ret=0 az=40.995<-2733 ze=21.18<-10588 Statuses=0008 0009 01:17:52 Msec=0 True Az=40.995 Ze=21.18 Az status=0008 Ze status=0009 01:17:52 Check angles 01:17:52 SkyScan query 01:17:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.225<-12015 Statuses=0008 0009 01:17:53 Msec=750 True Az=40.995 Ze=-0.225 Az status=0008 Ze status=0009 01:17:53 Check angles 01:17:53 SkyScan query 01:17:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.165<-13411 Statuses=0008 0009 01:17:53 Msec=1500 True Az=40.995 Ze=-21.165 Az status=0008 Ze status=0009 01:17:54 Check angles 01:17:54 SkyScan query 01:17:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 01:17:54 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 01:17:54 Check angles 01:17:54 SkyScan query 01:17:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:17:55 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:17:55 Message to Master queued w/err=0: serial=126068 error=0 01:18:00 Received message from Master: op=Filter serial=126069 01:18:00 Color wheel filter change from 0 to 0 01:18:00 FLIGetFilterPos err=0 currentPosition=0 01:18:00 FLIGetStepsRemaining err=0 RemainingSteps=0 01:18:00 Filter is already there-color wheel unchanged 01:18:00 Received message from Master: op=Shutter serial=126070 01:18:00 Shutter LASER close 01:18:00 Received message from Camera: op=State serial=126072 01:18:00 GetSingleValue result=40 Value=cccccccc 01:18:00 SkyScan query 01:18:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:18:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:01 Parameters OK 01:18:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:01 Set A/D data flow result=40 01:18:01 Set A/D channel type result=40 01:18:01 Set A/D encoding result=40 01:18:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:01 Set channel filter=0.000000e+000 result=40 01:18:01 Config A/D Result=40 01:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:01 Get A/D filter: -9.255963e+061 result=40 01:18:01 Get A/D value=-858993460 result=40 01:18:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:01 Parameters OK 01:18:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:01 Set A/D data flow result=40 01:18:01 Set A/D channel type result=40 01:18:01 Set A/D encoding result=40 01:18:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:01 Set channel filter=0.000000e+000 result=40 01:18:01 Config A/D Result=40 01:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:01 Get A/D filter: -9.255963e+061 result=40 01:18:01 Get A/D value=-858993460 result=40 01:18:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:18:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:18:01 Aux= 01:18:01 Message to Camera, serial 126072 queued 01:18:37 Received message from Master: op=PointingHead serial=126085 01:18:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:18:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:18:38 Point started: ret=0 01:18:38 point_skyscan result=0 01:18:39 Check angles 01:18:39 SkyScan query 01:18:39 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.025<-16535 Statuses=0009 0009 01:18:39 Msec=0 True Az=63.93 Ze=-68.025 Az status=0009 Ze status=0009 01:18:39 Check angles 01:18:39 SkyScan query 01:18:40 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.01<-17934 Statuses=0009 0009 01:18:40 Msec=750 True Az=81.33 Ze=-89.01 Az status=0009 Ze status=0009 01:18:40 Check angles 01:18:40 SkyScan query 01:18:41 SkyScan query done: ret=0 az=98.865<-6591 ze=-109.92<-19328 Statuses=0009 0009 01:18:41 Msec=1500 True Az=98.865 Ze=-109.92 Az status=0009 Ze status=0009 01:18:41 Check angles 01:18:41 SkyScan query 01:18:41 SkyScan query done: ret=0 az=116.415<-7761 ze=-130.92<-20728 Statuses=0009 0009 01:18:41 Msec=2250 True Az=116.415 Ze=-130.92 Az status=0009 Ze status=0009 01:18:42 Check angles 01:18:42 SkyScan query 01:18:42 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 01:18:42 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 01:18:42 Check angles 01:18:42 SkyScan query 01:18:43 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:18:43 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:18:43 Message to Master queued w/err=0: serial=126085 error=0 01:18:48 Received message from Master: op=Filter serial=126086 01:18:48 Color wheel filter change from 0 to 0 01:18:48 FLIGetFilterPos err=0 currentPosition=0 01:18:48 FLIGetStepsRemaining err=0 RemainingSteps=0 01:18:48 Filter is already there-color wheel unchanged 01:18:48 Received message from Master: op=Shutter serial=126087 01:18:48 Shutter LASER close 01:18:48 Received message from Camera: op=State serial=126089 01:18:48 GetSingleValue result=40 Value=cccccccc 01:18:48 SkyScan query 01:18:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:18:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:49 Parameters OK 01:18:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:49 Set A/D data flow result=40 01:18:49 Set A/D channel type result=40 01:18:49 Set A/D encoding result=40 01:18:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:49 Set channel filter=0.000000e+000 result=40 01:18:49 Config A/D Result=40 01:18:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:49 Get A/D filter: -9.255963e+061 result=40 01:18:49 Get A/D value=-858993460 result=40 01:18:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:49 Parameters OK 01:18:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:49 Set A/D data flow result=40 01:18:49 Set A/D channel type result=40 01:18:49 Set A/D encoding result=40 01:18:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:49 Set channel filter=0.000000e+000 result=40 01:18:49 Config A/D Result=40 01:18:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:49 Get A/D filter: -9.255963e+061 result=40 01:18:49 Get A/D value=-858993460 result=40 01:18:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:18:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:18:49 Aux= 01:18:49 Message to Camera, serial 126089 queued 01:19:26 Received message from Master: op=PointingHead serial=126102 01:19:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:19:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:19:26 Point started: ret=0 01:19:26 point_skyscan result=0 01:19:27 Check angles 01:19:27 SkyScan query 01:19:27 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 01:19:27 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 01:19:27 Check angles 01:19:27 SkyScan query 01:19:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:19:28 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:19:28 Message to Master queued w/err=0: serial=126102 error=0 01:19:33 Received message from Master: op=Filter serial=126103 01:19:33 Color wheel filter change from 0 to 0 01:19:33 FLIGetFilterPos err=0 currentPosition=0 01:19:33 FLIGetStepsRemaining err=0 RemainingSteps=0 01:19:33 Filter is already there-color wheel unchanged 01:19:33 Received message from Master: op=Shutter serial=126104 01:19:33 Shutter LASER open 01:19:33 Received message from Camera: op=State serial=126106 01:19:33 GetSingleValue result=40 Value=cccccccc 01:19:33 SkyScan query 01:19:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:19:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:34 Parameters OK 01:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:34 Set A/D data flow result=40 01:19:34 Set A/D channel type result=40 01:19:34 Set A/D encoding result=40 01:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:34 Set channel filter=0.000000e+000 result=40 01:19:34 Config A/D Result=40 01:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:34 Get A/D filter: -9.255963e+061 result=40 01:19:34 Get A/D value=-858993460 result=40 01:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:34 Parameters OK 01:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:34 Set A/D data flow result=40 01:19:34 Set A/D channel type result=40 01:19:34 Set A/D encoding result=40 01:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:34 Set channel filter=0.000000e+000 result=40 01:19:34 Config A/D Result=40 01:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:34 Get A/D filter: -9.255963e+061 result=40 01:19:34 Get A/D value=-858993460 result=40 01:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:19:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:19:34 Aux= 01:19:34 Message to Camera, serial 126106 queued 01:19:42 Received message from Master: op=Shutter serial=126116 01:19:42 Shutter LASER close 01:19:43 Received message from Master: op=PointingHead serial=126120 01:19:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:19:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:19:43 Point started: ret=0 01:19:43 point_skyscan result=0 01:19:44 Check angles 01:19:44 SkyScan query 01:19:45 SkyScan query done: ret=0 az=136.425<-9095 ze=-142.65<-21510 Statuses=0009 0009 01:19:45 Msec=0 True Az=136.425 Ze=-142.65 Az status=0009 Ze status=0009 01:19:45 Check angles 01:19:45 SkyScan query 01:19:45 SkyScan query done: ret=0 az=154.23<-10282 ze=-121.32<-20088 Statuses=0009 0009 01:19:45 Msec=750 True Az=154.23 Ze=-121.32 Az status=0009 Ze status=0009 01:19:46 Check angles 01:19:46 SkyScan query 01:19:46 SkyScan query done: ret=0 az=171.75<-11450 ze=-100.275<-18685 Statuses=0009 0009 01:19:46 Msec=1500 True Az=171.75 Ze=-100.275 Az status=0009 Ze status=0009 01:19:46 Check angles 01:19:46 SkyScan query 01:19:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.35<-17290 Statuses=0008 0009 01:19:47 Msec=2250 True Az=176.01 Ze=-79.35 Az status=0008 Ze status=0009 01:19:47 Check angles 01:19:47 SkyScan query 01:19:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.38<-15892 Statuses=0008 0009 01:19:48 Msec=3000 True Az=176.01 Ze=-58.38 Az status=0008 Ze status=0009 01:19:48 Check angles 01:19:48 SkyScan query 01:19:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 01:19:48 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 01:19:48 Message to Master queued w/err=0: serial=126120 error=0 01:19:53 Received message from Master: op=Filter serial=126121 01:19:53 Color wheel filter change from 0 to 0 01:19:53 FLIGetFilterPos err=0 currentPosition=0 01:19:53 FLIGetStepsRemaining err=0 RemainingSteps=0 01:19:53 Filter is already there-color wheel unchanged 01:19:54 Received message from Master: op=Shutter serial=126122 01:19:54 Shutter LASER close 01:19:54 Received message from Camera: op=State serial=126124 01:19:54 GetSingleValue result=40 Value=cccccccc 01:19:54 SkyScan query 01:19:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:19:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:54 Parameters OK 01:19:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:54 Set A/D data flow result=40 01:19:54 Set A/D channel type result=40 01:19:54 Set A/D encoding result=40 01:19:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:54 Set channel filter=0.000000e+000 result=40 01:19:54 Config A/D Result=40 01:19:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:54 Get A/D filter: -9.255963e+061 result=40 01:19:54 Get A/D value=-858993460 result=40 01:19:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:54 Parameters OK 01:19:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:54 Set A/D data flow result=40 01:19:54 Set A/D channel type result=40 01:19:54 Set A/D encoding result=40 01:19:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:54 Set channel filter=0.000000e+000 result=40 01:19:54 Config A/D Result=40 01:19:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:54 Get A/D filter: -9.255963e+061 result=40 01:19:54 Get A/D value=-858993460 result=40 01:19:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:19:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:19:54 Aux= 01:19:54 Message to Camera, serial 126124 queued 01:20:31 Received message from Master: op=PointingHead serial=126137 01:20:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:20:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:20:32 Point started: ret=0 01:20:32 point_skyscan result=0 01:20:32 Check angles 01:20:32 SkyScan query 01:20:33 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.735<-13449 Statuses=0009 0009 01:20:33 Msec=0 True Az=152.94 Ze=-21.735 Az status=0009 Ze status=0009 01:20:33 Check angles 01:20:33 SkyScan query 01:20:34 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.315<-12021 Statuses=0009 0009 01:20:34 Msec=750 True Az=135.12 Ze=-0.315 Az status=0009 Ze status=0009 01:20:34 Check angles 01:20:34 SkyScan query 01:20:34 SkyScan query done: ret=0 az=117.57<-7838 ze=20.655<-10623 Statuses=0009 0009 01:20:34 Msec=1500 True Az=117.57 Ze=20.655 Az status=0009 Ze status=0009 01:20:35 Check angles 01:20:35 SkyScan query 01:20:35 SkyScan query done: ret=0 az=99.915<-6661 ze=42.015<-9199 Statuses=0009 0009 01:20:35 Msec=2250 True Az=99.915 Ze=42.015 Az status=0009 Ze status=0009 01:20:35 Check angles 01:20:35 SkyScan query 01:20:36 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 01:20:36 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 01:20:36 Check angles 01:20:36 SkyScan query 01:20:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:20:37 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:20:37 Message to Master queued w/err=0: serial=126137 error=0 01:20:42 Received message from Master: op=Filter serial=126138 01:20:42 Color wheel filter change from 0 to 0 01:20:42 FLIGetFilterPos err=0 currentPosition=0 01:20:42 FLIGetStepsRemaining err=0 RemainingSteps=0 01:20:42 Filter is already there-color wheel unchanged 01:20:42 Received message from Master: op=Shutter serial=126139 01:20:42 Shutter LASER close 01:20:42 Received message from Camera: op=State serial=126141 01:20:42 GetSingleValue result=40 Value=cccccccc 01:20:42 SkyScan query 01:20:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:20:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:42 Parameters OK 01:20:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:42 Set A/D data flow result=40 01:20:42 Set A/D channel type result=40 01:20:42 Set A/D encoding result=40 01:20:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:42 Set channel filter=0.000000e+000 result=40 01:20:42 Config A/D Result=40 01:20:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:42 Get A/D filter: -9.255963e+061 result=40 01:20:42 Get A/D value=-858993460 result=40 01:20:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:42 Parameters OK 01:20:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:42 Set A/D data flow result=40 01:20:42 Set A/D channel type result=40 01:20:42 Set A/D encoding result=40 01:20:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:42 Set channel filter=0.000000e+000 result=40 01:20:42 Config A/D Result=40 01:20:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:42 Get A/D filter: -9.255963e+061 result=40 01:20:42 Get A/D value=-858993460 result=40 01:20:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:20:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:20:42 Aux= 01:20:42 Message to Camera, serial 126141 queued 01:21:19 Received message from Master: op=PointingHead serial=126154 01:21:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:21:19 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:21:20 Point started: ret=0 01:21:20 point_skyscan result=0 01:21:20 Check angles 01:21:20 SkyScan query 01:21:21 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 01:21:21 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 01:21:21 Check angles 01:21:21 SkyScan query 01:21:22 SkyScan query done: ret=0 az=126.96<-8464 ze=38.505<-9433 Statuses=0009 0008 01:21:22 Msec=750 True Az=126.96 Ze=38.505 Az status=0009 Ze status=0008 01:21:22 Check angles 01:21:22 SkyScan query 01:21:22 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 01:21:22 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 01:21:23 Check angles 01:21:23 SkyScan query 01:21:23 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 01:21:23 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 01:21:23 Check angles 01:21:23 SkyScan query 01:21:24 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:21:24 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:21:24 Check angles 01:21:24 SkyScan query 01:21:25 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:21:25 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:21:25 Message to Master queued w/err=0: serial=126154 error=0 01:21:30 Received message from Master: op=Filter serial=126155 01:21:30 Color wheel filter change from 0 to 0 01:21:30 FLIGetFilterPos err=0 currentPosition=0 01:21:30 FLIGetStepsRemaining err=0 RemainingSteps=0 01:21:30 Filter is already there-color wheel unchanged 01:21:30 Received message from Master: op=Shutter serial=126156 01:21:30 Shutter LASER close 01:21:30 Received message from Camera: op=State serial=126158 01:21:30 GetSingleValue result=40 Value=cccccccc 01:21:30 SkyScan query 01:21:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:21:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:21:30 Parameters OK 01:21:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:21:30 Set A/D data flow result=40 01:21:30 Set A/D channel type result=40 01:21:30 Set A/D encoding result=40 01:21:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:21:30 Set channel filter=0.000000e+000 result=40 01:21:30 Config A/D Result=40 01:21:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:21:30 Get A/D filter: -9.255963e+061 result=40 01:21:30 Get A/D value=-858993460 result=40 01:21:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:21:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:21:30 Parameters OK 01:21:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:21:30 Set A/D data flow result=40 01:21:30 Set A/D channel type result=40 01:21:30 Set A/D encoding result=40 01:21:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:21:30 Set channel filter=0.000000e+000 result=40 01:21:30 Config A/D Result=40 01:21:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:21:30 Get A/D filter: -9.255963e+061 result=40 01:21:30 Get A/D value=-858993460 result=40 01:21:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:21:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:21:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:21:30 Aux= 01:21:30 Message to Camera, serial 126158 queued 01:22:07 Received message from Master: op=PointingHead serial=126171 01:22:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:22:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:22:08 Point started: ret=0 01:22:08 point_skyscan result=0 01:22:08 Check angles 01:22:08 SkyScan query 01:22:09 SkyScan query done: ret=0 az=153.225<-10215 ze=8.925<-11405 Statuses=0009 0009 01:22:09 Msec=0 True Az=153.225 Ze=8.925 Az status=0009 Ze status=0009 01:22:09 Check angles 01:22:09 SkyScan query 01:22:10 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.465<-12831 Statuses=0009 0009 01:22:10 Msec=750 True Az=135.375 Ze=-12.465 Az status=0009 Ze status=0009 01:22:10 Check angles 01:22:10 SkyScan query 01:22:10 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.435<-14229 Statuses=0009 0009 01:22:10 Msec=1500 True Az=117.78 Ze=-33.435 Az status=0009 Ze status=0009 01:22:11 Check angles 01:22:11 SkyScan query 01:22:11 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.54<-15436 Statuses=0009 0009 01:22:11 Msec=2250 True Az=100.38 Ze=-51.54 Az status=0009 Ze status=0009 01:22:11 Check angles 01:22:11 SkyScan query 01:22:12 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:22:12 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:22:12 Check angles 01:22:12 SkyScan query 01:22:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:22:13 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:22:13 Message to Master queued w/err=0: serial=126171 error=0 01:22:18 Received message from Master: op=Filter serial=126172 01:22:18 Color wheel filter change from 0 to 0 01:22:18 FLIGetFilterPos err=0 currentPosition=0 01:22:18 FLIGetStepsRemaining err=0 RemainingSteps=0 01:22:18 Filter is already there-color wheel unchanged 01:22:18 Received message from Master: op=Shutter serial=126173 01:22:18 Shutter LASER close 01:22:18 Received message from Camera: op=State serial=126175 01:22:18 GetSingleValue result=40 Value=cccccccc 01:22:18 SkyScan query 01:22:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:22:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:19 Parameters OK 01:22:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:19 Set A/D data flow result=40 01:22:19 Set A/D channel type result=40 01:22:19 Set A/D encoding result=40 01:22:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:19 Set channel filter=0.000000e+000 result=40 01:22:19 Config A/D Result=40 01:22:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:19 Get A/D filter: -9.255963e+061 result=40 01:22:19 Get A/D value=-858993460 result=40 01:22:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:19 Parameters OK 01:22:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:19 Set A/D data flow result=40 01:22:19 Set A/D channel type result=40 01:22:19 Set A/D encoding result=40 01:22:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:19 Set channel filter=0.000000e+000 result=40 01:22:19 Config A/D Result=40 01:22:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:19 Get A/D filter: -9.255963e+061 result=40 01:22:19 Get A/D value=-858993460 result=40 01:22:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:22:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:22:19 Aux= 01:22:19 Message to Camera, serial 126175 queued 01:22:55 Received message from Master: op=PointingHead serial=126188 01:22:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:22:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:22:56 Point started: ret=0 01:22:56 point_skyscan result=0 01:22:56 Check angles 01:22:56 SkyScan query 01:22:57 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.435<-17429 Statuses=0009 0009 01:22:57 Msec=0 True Az=109.155 Ze=-81.435 Az status=0009 Ze status=0009 01:22:57 Check angles 01:22:57 SkyScan query 01:22:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.39<-18826 Statuses=0008 0009 01:22:58 Msec=750 True Az=112.995 Ze=-102.39 Az status=0008 Ze status=0009 01:22:58 Check angles 01:22:58 SkyScan query 01:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.33<-20222 Statuses=0008 0009 01:22:59 Msec=1500 True Az=112.995 Ze=-123.33 Az status=0008 Ze status=0009 01:22:59 Check angles 01:22:59 SkyScan query 01:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 01:22:59 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 01:22:59 Check angles 01:22:59 SkyScan query 01:23:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.24<-23016 Statuses=0008 0009 01:23:00 Msec=3000 True Az=112.995 Ze=-165.24 Az status=0008 Ze status=0009 01:23:00 Check angles 01:23:00 SkyScan query 01:23:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:23:01 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:23:01 Message to Master queued w/err=0: serial=126188 error=0 01:23:06 Received message from Master: op=Filter serial=126189 01:23:06 Color wheel filter change from 0 to 0 01:23:06 FLIGetFilterPos err=0 currentPosition=0 01:23:06 FLIGetStepsRemaining err=0 RemainingSteps=0 01:23:06 Filter is already there-color wheel unchanged 01:23:06 Received message from Master: op=Shutter serial=126190 01:23:06 Shutter LASER open 01:23:06 Received message from Camera: op=State serial=126192 01:23:06 GetSingleValue result=40 Value=cccccccc 01:23:06 SkyScan query 01:23:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:23:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:07 Parameters OK 01:23:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:07 Set A/D data flow result=40 01:23:07 Set A/D channel type result=40 01:23:07 Set A/D encoding result=40 01:23:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:07 Set channel filter=0.000000e+000 result=40 01:23:07 Config A/D Result=40 01:23:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:07 Get A/D filter: -9.255963e+061 result=40 01:23:07 Get A/D value=-858993460 result=40 01:23:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:07 Parameters OK 01:23:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:07 Set A/D data flow result=40 01:23:07 Set A/D channel type result=40 01:23:07 Set A/D encoding result=40 01:23:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:07 Set channel filter=0.000000e+000 result=40 01:23:07 Config A/D Result=40 01:23:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:07 Get A/D filter: -9.255963e+061 result=40 01:23:07 Get A/D value=-858993460 result=40 01:23:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:23:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:23:07 Aux= 01:23:07 Message to Camera, serial 126192 queued 01:23:15 Received message from Master: op=Shutter serial=126202 01:23:15 Shutter LASER close 01:23:16 Received message from Master: op=PointingHead serial=126206 01:23:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:23:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:23:16 Point started: ret=0 01:23:16 point_skyscan result=0 01:23:17 Check angles 01:23:17 SkyScan query 01:23:17 SkyScan query done: ret=0 az=89.64<-5976 ze=157.08<-1528 Statuses=0009 0009 01:23:17 Msec=0 True Az=89.64 Ze=157.08 Az status=0009 Ze status=0009 01:23:17 Check angles 01:23:17 SkyScan query 01:23:18 SkyScan query done: ret=0 az=72.225<-4815 ze=136.11<-2926 Statuses=0009 0009 01:23:18 Msec=750 True Az=72.225 Ze=136.11 Az status=0009 Ze status=0009 01:23:18 Check angles 01:23:18 SkyScan query 01:23:19 SkyScan query done: ret=0 az=54.9<-3660 ze=115.2<-4320 Statuses=0009 0009 01:23:19 Msec=1500 True Az=54.9 Ze=115.2 Az status=0009 Ze status=0009 01:23:19 Check angles 01:23:19 SkyScan query 01:23:20 SkyScan query done: ret=0 az=41.025<-2735 ze=94.185<-5721 Statuses=0009 0009 01:23:20 Msec=2250 True Az=41.025 Ze=94.185 Az status=0009 Ze status=0009 01:23:20 Check angles 01:23:20 SkyScan query 01:23:20 SkyScan query done: ret=0 az=40.995<-2733 ze=73.26<-7116 Statuses=0008 0009 01:23:20 Msec=3000 True Az=40.995 Ze=73.26 Az status=0008 Ze status=0009 01:23:20 Check angles 01:23:20 SkyScan query 01:23:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 01:23:21 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 01:23:21 Check angles 01:23:21 SkyScan query 01:23:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:23:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:23:22 Message to Master queued w/err=0: serial=126206 error=0 01:23:27 Received message from Master: op=Filter serial=126207 01:23:27 Color wheel filter change from 0 to 0 01:23:27 FLIGetFilterPos err=0 currentPosition=0 01:23:27 FLIGetStepsRemaining err=0 RemainingSteps=0 01:23:27 Filter is already there-color wheel unchanged 01:23:27 Received message from Master: op=Shutter serial=126208 01:23:27 Shutter LASER close 01:23:27 Received message from Camera: op=State serial=126210 01:23:27 GetSingleValue result=40 Value=cccccccc 01:23:27 SkyScan query 01:23:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:23:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:28 Parameters OK 01:23:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:28 Set A/D data flow result=40 01:23:28 Set A/D channel type result=40 01:23:28 Set A/D encoding result=40 01:23:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:28 Set channel filter=0.000000e+000 result=40 01:23:28 Config A/D Result=40 01:23:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:28 Get A/D filter: -9.255963e+061 result=40 01:23:28 Get A/D value=-858993460 result=40 01:23:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:28 Parameters OK 01:23:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:28 Set A/D data flow result=40 01:23:28 Set A/D channel type result=40 01:23:28 Set A/D encoding result=40 01:23:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:28 Set channel filter=0.000000e+000 result=40 01:23:28 Config A/D Result=40 01:23:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:28 Get A/D filter: -9.255963e+061 result=40 01:23:28 Get A/D value=-858993460 result=40 01:23:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:23:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:23:28 Aux= 01:23:28 Message to Camera, serial 126210 queued 01:24:05 Received message from Master: op=PointingHead serial=126223 01:24:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:24:05 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:24:05 Point started: ret=0 01:24:05 point_skyscan result=0 01:24:06 Check angles 01:24:06 SkyScan query 01:24:06 SkyScan query done: ret=0 az=40.995<-2733 ze=21.435<-10571 Statuses=0008 0009 01:24:06 Msec=0 True Az=40.995 Ze=21.435 Az status=0008 Ze status=0009 01:24:07 Check angles 01:24:07 SkyScan query 01:24:07 SkyScan query done: ret=0 az=40.995<-2733 ze=0.48<-11968 Statuses=0008 0009 01:24:07 Msec=750 True Az=40.995 Ze=0.48 Az status=0008 Ze status=0009 01:24:07 Check angles 01:24:07 SkyScan query 01:24:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.535<-13369 Statuses=0008 0009 01:24:08 Msec=1500 True Az=40.995 Ze=-20.535 Az status=0008 Ze status=0009 01:24:08 Check angles 01:24:08 SkyScan query 01:24:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 01:24:09 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 01:24:09 Check angles 01:24:09 SkyScan query 01:24:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:24:09 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:24:09 Message to Master queued w/err=0: serial=126223 error=0 01:24:14 Received message from Master: op=Filter serial=126224 01:24:14 Color wheel filter change from 0 to 0 01:24:14 FLIGetFilterPos err=0 currentPosition=0 01:24:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:24:14 Filter is already there-color wheel unchanged 01:24:15 Received message from Master: op=Shutter serial=126225 01:24:15 Shutter LASER close 01:24:15 Received message from Camera: op=State serial=126227 01:24:15 GetSingleValue result=40 Value=cccccccc 01:24:15 SkyScan query 01:24:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:24:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:15 Parameters OK 01:24:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:15 Set A/D data flow result=40 01:24:15 Set A/D channel type result=40 01:24:15 Set A/D encoding result=40 01:24:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:15 Set channel filter=0.000000e+000 result=40 01:24:15 Config A/D Result=40 01:24:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:15 Get A/D filter: -9.255963e+061 result=40 01:24:15 Get A/D value=-858993460 result=40 01:24:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:15 Parameters OK 01:24:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:15 Set A/D data flow result=40 01:24:15 Set A/D channel type result=40 01:24:15 Set A/D encoding result=40 01:24:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:15 Set channel filter=0.000000e+000 result=40 01:24:15 Config A/D Result=40 01:24:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:15 Get A/D filter: -9.255963e+061 result=40 01:24:15 Get A/D value=-858993460 result=40 01:24:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:24:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:24:15 Aux= 01:24:15 Message to Camera, serial 126227 queued 01:24:52 Received message from Master: op=PointingHead serial=126240 01:24:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:24:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:24:52 Point started: ret=0 01:24:52 point_skyscan result=0 01:24:53 Check angles 01:24:53 SkyScan query 01:24:54 SkyScan query done: ret=0 az=63.72<-4248 ze=-68.085<-16539 Statuses=0009 0009 01:24:54 Msec=0 True Az=63.72 Ze=-68.085 Az status=0009 Ze status=0009 01:24:54 Check angles 01:24:54 SkyScan query 01:24:54 SkyScan query done: ret=0 az=81.225<-5415 ze=-89.07<-17938 Statuses=0009 0009 01:24:54 Msec=750 True Az=81.225 Ze=-89.07 Az status=0009 Ze status=0009 01:24:55 Check angles 01:24:55 SkyScan query 01:24:55 SkyScan query done: ret=0 az=98.73<-6582 ze=-109.995<-19333 Statuses=0009 0009 01:24:55 Msec=1500 True Az=98.73 Ze=-109.995 Az status=0009 Ze status=0009 01:24:55 Check angles 01:24:55 SkyScan query 01:24:56 SkyScan query done: ret=0 az=116.175<-7745 ze=-130.965<-20731 Statuses=0009 0009 01:24:56 Msec=2250 True Az=116.175 Ze=-130.965 Az status=0009 Ze status=0009 01:24:56 Check angles 01:24:56 SkyScan query 01:24:57 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 01:24:57 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 01:24:57 Check angles 01:24:57 SkyScan query 01:24:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:24:57 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:24:57 Message to Master queued w/err=0: serial=126240 error=0 01:25:02 Received message from Master: op=Filter serial=126241 01:25:02 Color wheel filter change from 0 to 0 01:25:02 FLIGetFilterPos err=0 currentPosition=0 01:25:02 FLIGetStepsRemaining err=0 RemainingSteps=0 01:25:02 Filter is already there-color wheel unchanged 01:25:03 Received message from Master: op=Shutter serial=126242 01:25:03 Shutter LASER close 01:25:03 Received message from Camera: op=State serial=126244 01:25:03 GetSingleValue result=40 Value=cccccccc 01:25:03 SkyScan query 01:25:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:25:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:25:03 Parameters OK 01:25:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:25:03 Set A/D data flow result=40 01:25:03 Set A/D channel type result=40 01:25:03 Set A/D encoding result=40 01:25:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:25:03 Set channel filter=0.000000e+000 result=40 01:25:03 Config A/D Result=40 01:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:25:03 Get A/D filter: -9.255963e+061 result=40 01:25:03 Get A/D value=-858993460 result=40 01:25:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:25:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:25:03 Parameters OK 01:25:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:25:03 Set A/D data flow result=40 01:25:03 Set A/D channel type result=40 01:25:03 Set A/D encoding result=40 01:25:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:25:03 Set channel filter=0.000000e+000 result=40 01:25:03 Config A/D Result=40 01:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:25:03 Get A/D filter: -9.255963e+061 result=40 01:25:03 Get A/D value=-858993460 result=40 01:25:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:25:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:25:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:25:03 Aux= 01:25:03 Message to Camera, serial 126244 queued 01:25:40 Received message from Master: op=PointingHead serial=126257 01:25:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:25:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:25:40 Point started: ret=0 01:25:40 point_skyscan result=0 01:25:41 Check angles 01:25:41 SkyScan query 01:25:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.405<-23427 Statuses=0009 0009 01:25:42 Msec=0 True Az=112.995 Ze=-171.405 Az status=0009 Ze status=0009 01:25:42 Check angles 01:25:42 SkyScan query 01:25:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:25:43 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:25:43 Message to Master queued w/err=0: serial=126257 error=0 01:25:48 Received message from Master: op=Filter serial=126258 01:25:48 Color wheel filter change from 0 to 0 01:25:48 FLIGetFilterPos err=0 currentPosition=0 01:25:48 FLIGetStepsRemaining err=0 RemainingSteps=0 01:25:48 Filter is already there-color wheel unchanged 01:25:48 Received message from Master: op=Shutter serial=126259 [UTC 2018-12-14 01:25:48] 01:25:48 Shutter LASER open 01:25:48 Received message from Camera: op=State serial=126261 01:25:48 GetSingleValue result=40 Value=cccccccc 01:25:48 SkyScan query 01:25:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:25:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:25:48 Parameters OK 01:25:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:25:48 Set A/D data flow result=40 01:25:48 Set A/D channel type result=40 01:25:48 Set A/D encoding result=40 01:25:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:25:48 Set channel filter=0.000000e+000 result=40 01:25:48 Config A/D Result=40 01:25:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:25:48 Get A/D filter: -9.255963e+061 result=40 01:25:48 Get A/D value=-858993460 result=40 01:25:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:25:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:25:48 Parameters OK 01:25:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:25:48 Set A/D data flow result=40 01:25:48 Set A/D channel type result=40 01:25:48 Set A/D encoding result=40 01:25:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:25:48 Set channel filter=0.000000e+000 result=40 01:25:48 Config A/D Result=40 01:25:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:25:48 Get A/D filter: -9.255963e+061 result=40 01:25:48 Get A/D value=-858993460 result=40 01:25:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:25:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:25:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:25:48 Aux= 01:25:48 Message to Camera, serial 126261 queued 01:25:57 Received message from Master: op=Shutter serial=126271 01:25:57 Shutter LASER close 01:25:57 Received message from Master: op=PointingHead serial=126275 01:25:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:25:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:25:58 Point started: ret=0 01:25:58 point_skyscan result=0 01:25:59 Check angles 01:25:59 SkyScan query 01:25:59 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.565<-21571 Statuses=0009 0009 01:25:59 Msec=0 True Az=135.72 Ze=-143.565 Az status=0009 Ze status=0009 01:25:59 Check angles 01:25:59 SkyScan query 01:26:00 SkyScan query done: ret=0 az=153.18<-10212 ze=-122.595<-20173 Statuses=0009 0009 01:26:00 Msec=750 True Az=153.18 Ze=-122.595 Az status=0009 Ze status=0009 01:26:00 Check angles 01:26:00 SkyScan query 01:26:01 SkyScan query done: ret=0 az=170.625<-11375 ze=-101.7<-18780 Statuses=0009 0009 01:26:01 Msec=1500 True Az=170.625 Ze=-101.7 Az status=0009 Ze status=0009 01:26:01 Check angles 01:26:01 SkyScan query 01:26:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.625<-17375 Statuses=0008 0009 01:26:01 Msec=2250 True Az=176.01 Ze=-80.625 Az status=0008 Ze status=0009 01:26:02 Check angles 01:26:02 SkyScan query 01:26:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.745<-15983 Statuses=0008 0009 01:26:02 Msec=3000 True Az=176.01 Ze=-59.745 Az status=0008 Ze status=0009 01:26:02 Check angles 01:26:02 SkyScan query 01:26:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:26:03 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:26:03 Message to Master queued w/err=0: serial=126275 error=0 01:26:08 Received message from Master: op=Filter serial=126276 01:26:08 Color wheel filter change from 0 to 0 01:26:08 FLIGetFilterPos err=0 currentPosition=0 01:26:08 FLIGetStepsRemaining err=0 RemainingSteps=0 01:26:08 Filter is already there-color wheel unchanged 01:26:08 Received message from Master: op=Shutter serial=126277 01:26:08 Shutter LASER close 01:26:08 Received message from Camera: op=State serial=126279 01:26:08 GetSingleValue result=40 Value=cccccccc 01:26:08 SkyScan query 01:26:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:26:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:09 Parameters OK 01:26:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:09 Set A/D data flow result=40 01:26:09 Set A/D channel type result=40 01:26:09 Set A/D encoding result=40 01:26:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:09 Set channel filter=0.000000e+000 result=40 01:26:09 Config A/D Result=40 01:26:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:09 Get A/D filter: -9.255963e+061 result=40 01:26:09 Get A/D value=-858993460 result=40 01:26:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:09 Parameters OK 01:26:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:09 Set A/D data flow result=40 01:26:09 Set A/D channel type result=40 01:26:09 Set A/D encoding result=40 01:26:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:09 Set channel filter=0.000000e+000 result=40 01:26:09 Config A/D Result=40 01:26:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:09 Get A/D filter: -9.255963e+061 result=40 01:26:09 Get A/D value=-858993460 result=40 01:26:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:26:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:26:09 Aux= 01:26:09 Message to Camera, serial 126279 queued 01:26:46 Received message from Master: op=PointingHead serial=126292 01:26:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:26:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:26:46 Point started: ret=0 01:26:46 point_skyscan result=0 01:26:47 Check angles 01:26:47 SkyScan query 01:26:47 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.72<-13448 Statuses=0009 0009 01:26:47 Msec=0 True Az=152.97 Ze=-21.72 Az status=0009 Ze status=0009 01:26:47 Check angles 01:26:47 SkyScan query 01:26:48 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.735<-12049 Statuses=0009 0009 01:26:48 Msec=750 True Az=135.405 Ze=-0.735 Az status=0009 Ze status=0009 01:26:48 Check angles 01:26:48 SkyScan query 01:26:49 SkyScan query done: ret=0 az=117.96<-7864 ze=20.205<-10653 Statuses=0009 0009 01:26:49 Msec=1500 True Az=117.96 Ze=20.205 Az status=0009 Ze status=0009 01:26:49 Check angles 01:26:49 SkyScan query 01:26:50 SkyScan query done: ret=0 az=100.605<-6707 ze=41.19<-9254 Statuses=0009 0009 01:26:50 Msec=2250 True Az=100.605 Ze=41.19 Az status=0009 Ze status=0009 01:26:50 Check angles 01:26:50 SkyScan query 01:26:50 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 01:26:50 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 01:26:50 Check angles 01:26:50 SkyScan query 01:26:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:26:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:26:51 Message to Master queued w/err=0: serial=126292 error=0 01:26:56 Received message from Master: op=Filter serial=126293 01:26:56 Color wheel filter change from 0 to 0 01:26:56 FLIGetFilterPos err=0 currentPosition=0 01:26:56 FLIGetStepsRemaining err=0 RemainingSteps=0 01:26:56 Filter is already there-color wheel unchanged 01:26:56 Received message from Master: op=Shutter serial=126294 01:26:56 Shutter LASER close 01:26:56 Received message from Camera: op=State serial=126296 01:26:56 GetSingleValue result=40 Value=cccccccc 01:26:56 SkyScan query 01:26:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:26:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:57 Parameters OK 01:26:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:57 Set A/D data flow result=40 01:26:57 Set A/D channel type result=40 01:26:57 Set A/D encoding result=40 01:26:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:57 Set channel filter=0.000000e+000 result=40 01:26:57 Config A/D Result=40 01:26:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:57 Get A/D filter: -9.255963e+061 result=40 01:26:57 Get A/D value=-858993460 result=40 01:26:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:57 Parameters OK 01:26:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:57 Set A/D data flow result=40 01:26:57 Set A/D channel type result=40 01:26:57 Set A/D encoding result=40 01:26:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:57 Set channel filter=0.000000e+000 result=40 01:26:57 Config A/D Result=40 01:26:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:57 Get A/D filter: -9.255963e+061 result=40 01:26:57 Get A/D value=-858993460 result=40 01:26:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:26:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:26:57 Aux= 01:26:57 Message to Camera, serial 126296 queued 01:27:34 Received message from Master: op=PointingHead serial=126309 01:27:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:27:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:27:34 Point started: ret=0 01:27:34 point_skyscan result=0 01:27:35 Check angles 01:27:35 SkyScan query 01:27:35 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 01:27:35 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 01:27:36 Check angles 01:27:36 SkyScan query 01:27:36 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 01:27:36 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 01:27:36 Check angles 01:27:36 SkyScan query 01:27:37 SkyScan query done: ret=0 az=143.91<-9594 ze=38.505<-9433 Statuses=0009 0008 01:27:37 Msec=1500 True Az=143.91 Ze=38.505 Az status=0009 Ze status=0008 01:27:37 Check angles 01:27:37 SkyScan query 01:27:38 SkyScan query done: ret=0 az=161.61<-10774 ze=38.505<-9433 Statuses=0009 0008 01:27:38 Msec=2250 True Az=161.61 Ze=38.505 Az status=0009 Ze status=0008 01:27:38 Check angles 01:27:38 SkyScan query 01:27:38 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:27:38 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:27:39 Check angles 01:27:39 SkyScan query 01:27:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:27:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:27:39 Message to Master queued w/err=0: serial=126309 error=0 01:27:44 Received message from Master: op=Filter serial=126310 01:27:44 Color wheel filter change from 0 to 0 01:27:44 FLIGetFilterPos err=0 currentPosition=0 01:27:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:27:44 Filter is already there-color wheel unchanged 01:27:44 Received message from Master: op=Shutter serial=126311 01:27:44 Shutter LASER close 01:27:44 Received message from Camera: op=State serial=126313 01:27:44 GetSingleValue result=40 Value=cccccccc 01:27:44 SkyScan query 01:27:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:27:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:27:45 Parameters OK 01:27:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:27:45 Set A/D data flow result=40 01:27:45 Set A/D channel type result=40 01:27:45 Set A/D encoding result=40 01:27:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:27:45 Set channel filter=0.000000e+000 result=40 01:27:45 Config A/D Result=40 01:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:27:45 Get A/D filter: -9.255963e+061 result=40 01:27:45 Get A/D value=-858993460 result=40 01:27:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:27:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:27:45 Parameters OK 01:27:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:27:45 Set A/D data flow result=40 01:27:45 Set A/D channel type result=40 01:27:45 Set A/D encoding result=40 01:27:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:27:45 Set channel filter=0.000000e+000 result=40 01:27:45 Config A/D Result=40 01:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:27:45 Get A/D filter: -9.255963e+061 result=40 01:27:45 Get A/D value=-858993460 result=40 01:27:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:27:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:27:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:27:45 Aux= 01:27:45 Message to Camera, serial 126313 queued 01:28:22 Received message from Master: op=PointingHead serial=126326 01:28:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:28:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:28:22 Point started: ret=0 01:28:22 point_skyscan result=0 01:28:23 Check angles 01:28:23 SkyScan query 01:28:23 SkyScan query done: ret=0 az=153.165<-10211 ze=8.895<-11407 Statuses=0009 0009 01:28:23 Msec=0 True Az=153.165 Ze=8.895 Az status=0009 Ze status=0009 01:28:24 Check angles 01:28:24 SkyScan query 01:28:24 SkyScan query done: ret=0 az=135.72<-9048 ze=-12.075<-12805 Statuses=0009 0009 01:28:24 Msec=750 True Az=135.72 Ze=-12.075 Az status=0009 Ze status=0009 01:28:24 Check angles 01:28:24 SkyScan query 01:28:25 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.435<-14229 Statuses=0009 0009 01:28:25 Msec=1500 True Az=117.81 Ze=-33.435 Az status=0009 Ze status=0009 01:28:25 Check angles 01:28:25 SkyScan query 01:28:26 SkyScan query done: ret=0 az=100.455<-6697 ze=-51.555<-15437 Statuses=0009 0009 01:28:26 Msec=2250 True Az=100.455 Ze=-51.555 Az status=0009 Ze status=0009 01:28:26 Check angles 01:28:26 SkyScan query 01:28:27 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:28:27 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:28:27 Check angles 01:28:27 SkyScan query 01:28:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:28:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:28:27 Message to Master queued w/err=0: serial=126326 error=0 01:28:32 Received message from Master: op=Filter serial=126327 01:28:32 Color wheel filter change from 0 to 0 01:28:32 FLIGetFilterPos err=0 currentPosition=0 01:28:32 FLIGetStepsRemaining err=0 RemainingSteps=0 01:28:32 Filter is already there-color wheel unchanged 01:28:32 Received message from Master: op=Shutter serial=126328 01:28:32 Shutter LASER close 01:28:32 Received message from Camera: op=State serial=126330 01:28:32 GetSingleValue result=40 Value=cccccccc 01:28:32 SkyScan query 01:28:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:28:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:33 Parameters OK 01:28:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:33 Set A/D data flow result=40 01:28:33 Set A/D channel type result=40 01:28:33 Set A/D encoding result=40 01:28:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:33 Set channel filter=0.000000e+000 result=40 01:28:33 Config A/D Result=40 01:28:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:33 Get A/D filter: -9.255963e+061 result=40 01:28:33 Get A/D value=-858993460 result=40 01:28:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:33 Parameters OK 01:28:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:33 Set A/D data flow result=40 01:28:33 Set A/D channel type result=40 01:28:33 Set A/D encoding result=40 01:28:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:33 Set channel filter=0.000000e+000 result=40 01:28:33 Config A/D Result=40 01:28:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:33 Get A/D filter: -9.255963e+061 result=40 01:28:33 Get A/D value=-858993460 result=40 01:28:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:28:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:28:33 Aux= 01:28:33 Message to Camera, serial 126330 queued 01:29:10 Received message from Master: op=PointingHead serial=126343 01:29:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:29:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:29:10 Point started: ret=0 01:29:10 point_skyscan result=0 01:29:11 Check angles 01:29:11 SkyScan query 01:29:12 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.51<-17434 Statuses=0009 0009 01:29:12 Msec=0 True Az=109.14 Ze=-81.51 Az status=0009 Ze status=0009 01:29:12 Check angles 01:29:12 SkyScan query 01:29:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 01:29:12 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 01:29:13 Check angles 01:29:13 SkyScan query 01:29:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 01:29:13 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 01:29:13 Check angles 01:29:13 SkyScan query 01:29:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 01:29:14 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 01:29:14 Check angles 01:29:14 SkyScan query 01:29:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.78<-23052 Statuses=0008 0009 01:29:15 Msec=3000 True Az=112.995 Ze=-165.78 Az status=0008 Ze status=0009 01:29:15 Check angles 01:29:15 SkyScan query 01:29:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:29:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:29:15 Message to Master queued w/err=0: serial=126343 error=0 01:29:20 Received message from Master: op=Filter serial=126344 01:29:20 Color wheel filter change from 0 to 0 01:29:20 FLIGetFilterPos err=0 currentPosition=0 01:29:20 FLIGetStepsRemaining err=0 RemainingSteps=0 01:29:20 Filter is already there-color wheel unchanged 01:29:21 Received message from Master: op=Shutter serial=126345 01:29:21 Shutter LASER open 01:29:21 Received message from Camera: op=State serial=126347 01:29:21 GetSingleValue result=40 Value=cccccccc 01:29:21 SkyScan query 01:29:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:29:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:21 Parameters OK 01:29:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:21 Set A/D data flow result=40 01:29:21 Set A/D channel type result=40 01:29:21 Set A/D encoding result=40 01:29:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:21 Set channel filter=0.000000e+000 result=40 01:29:21 Config A/D Result=40 01:29:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:21 Get A/D filter: -9.255963e+061 result=40 01:29:21 Get A/D value=-858993460 result=40 01:29:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:21 Parameters OK 01:29:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:21 Set A/D data flow result=40 01:29:21 Set A/D channel type result=40 01:29:21 Set A/D encoding result=40 01:29:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:21 Set channel filter=0.000000e+000 result=40 01:29:21 Config A/D Result=40 01:29:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:21 Get A/D filter: -9.255963e+061 result=40 01:29:21 Get A/D value=-858993460 result=40 01:29:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:29:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:29:21 Aux= 01:29:21 Message to Camera, serial 126347 queued 01:29:30 Received message from Master: op=Shutter serial=126357 01:29:30 Shutter LASER close 01:29:30 Received message from Master: op=PointingHead serial=126361 01:29:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:29:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:29:30 Point started: ret=0 01:29:30 point_skyscan result=0 01:29:31 Check angles 01:29:31 SkyScan query 01:29:32 SkyScan query done: ret=0 az=89.625<-5975 ze=156.975<-1535 Statuses=0009 0009 01:29:32 Msec=0 True Az=89.625 Ze=156.975 Az status=0009 Ze status=0009 01:29:32 Check angles 01:29:32 SkyScan query 01:29:33 SkyScan query done: ret=0 az=71.805<-4787 ze=135.585<-2961 Statuses=0009 0009 01:29:33 Msec=750 True Az=71.805 Ze=135.585 Az status=0009 Ze status=0009 01:29:33 Check angles 01:29:33 SkyScan query 01:29:33 SkyScan query done: ret=0 az=54.525<-3635 ze=114.585<-4361 Statuses=0009 0009 01:29:33 Msec=1500 True Az=54.525 Ze=114.585 Az status=0009 Ze status=0009 01:29:34 Check angles 01:29:34 SkyScan query 01:29:34 SkyScan query done: ret=0 az=40.965<-2731 ze=93.69<-5754 Statuses=0009 0009 01:29:34 Msec=2250 True Az=40.965 Ze=93.69 Az status=0009 Ze status=0009 01:29:34 Check angles 01:29:34 SkyScan query 01:29:35 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 01:29:35 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 01:29:35 Check angles 01:29:35 SkyScan query 01:29:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 01:29:36 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 01:29:36 Check angles 01:29:36 SkyScan query 01:29:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:29:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:29:36 Message to Master queued w/err=0: serial=126361 error=0 01:29:41 Received message from Master: op=Filter serial=126362 01:29:41 Color wheel filter change from 0 to 0 01:29:41 FLIGetFilterPos err=0 currentPosition=0 01:29:41 FLIGetStepsRemaining err=0 RemainingSteps=0 01:29:41 Filter is already there-color wheel unchanged 01:29:42 Received message from Master: op=Shutter serial=126363 01:29:42 Shutter LASER close 01:29:42 Received message from Camera: op=State serial=126365 01:29:42 GetSingleValue result=40 Value=cccccccc 01:29:42 SkyScan query 01:29:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:29:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:42 Parameters OK 01:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:42 Set A/D data flow result=40 01:29:42 Set A/D channel type result=40 01:29:42 Set A/D encoding result=40 01:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:42 Set channel filter=0.000000e+000 result=40 01:29:42 Config A/D Result=40 01:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:42 Get A/D filter: -9.255963e+061 result=40 01:29:42 Get A/D value=-858993460 result=40 01:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:42 Parameters OK 01:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:42 Set A/D data flow result=40 01:29:42 Set A/D channel type result=40 01:29:42 Set A/D encoding result=40 01:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:42 Set channel filter=0.000000e+000 result=40 01:29:42 Config A/D Result=40 01:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:42 Get A/D filter: -9.255963e+061 result=40 01:29:42 Get A/D value=-858993460 result=40 01:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:29:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:29:42 Aux= 01:29:42 Message to Camera, serial 126365 queued 01:30:18 Received message from Master: op=PointingHead serial=126377 01:30:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:30:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:30:19 Point started: ret=0 01:30:19 point_skyscan result=0 01:30:19 Check angles 01:30:19 SkyScan query 01:30:20 SkyScan query done: ret=0 az=40.995<-2733 ze=21.78<-10548 Statuses=0008 0009 01:30:20 Msec=0 True Az=40.995 Ze=21.78 Az status=0008 Ze status=0009 01:30:20 Check angles 01:30:20 SkyScan query 01:30:21 SkyScan query done: ret=0 az=40.995<-2733 ze=0.825<-11945 Statuses=0008 0009 01:30:21 Msec=750 True Az=40.995 Ze=0.825 Az status=0008 Ze status=0009 01:30:21 Check angles 01:30:21 SkyScan query 01:30:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.13<-13342 Statuses=0008 0009 01:30:21 Msec=1500 True Az=40.995 Ze=-20.13 Az status=0008 Ze status=0009 01:30:22 Check angles 01:30:22 SkyScan query 01:30:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 01:30:22 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 01:30:22 Check angles 01:30:22 SkyScan query 01:30:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:30:23 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:30:23 Message to Master queued w/err=0: serial=126377 error=0 01:30:28 Received message from Master: op=Filter serial=126378 01:30:28 Color wheel filter change from 0 to 0 01:30:28 FLIGetFilterPos err=0 currentPosition=0 01:30:28 FLIGetStepsRemaining err=0 RemainingSteps=0 01:30:28 Filter is already there-color wheel unchanged 01:30:28 Received message from Master: op=Shutter serial=126379 01:30:28 Shutter LASER close 01:30:28 Received message from Camera: op=State serial=126381 01:30:28 GetSingleValue result=40 Value=cccccccc 01:30:28 SkyScan query 01:30:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:30:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:29 Parameters OK 01:30:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:29 Set A/D data flow result=40 01:30:29 Set A/D channel type result=40 01:30:29 Set A/D encoding result=40 01:30:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:29 Set channel filter=0.000000e+000 result=40 01:30:29 Config A/D Result=40 01:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:29 Get A/D filter: -9.255963e+061 result=40 01:30:29 Get A/D value=-858993460 result=40 01:30:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:29 Parameters OK 01:30:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:29 Set A/D data flow result=40 01:30:29 Set A/D channel type result=40 01:30:29 Set A/D encoding result=40 01:30:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:29 Set channel filter=0.000000e+000 result=40 01:30:29 Config A/D Result=40 01:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:29 Get A/D filter: -9.255963e+061 result=40 01:30:29 Get A/D value=-858993460 result=40 01:30:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:30:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:30:29 Aux= 01:30:29 Message to Camera, serial 126381 queued 01:31:06 Received message from Master: op=PointingHead serial=126394 01:31:06 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:31:06 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:31:06 Point started: ret=0 01:31:06 point_skyscan result=0 01:31:07 Check angles 01:31:07 SkyScan query 01:31:07 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.01<-16534 Statuses=0009 0009 01:31:07 Msec=0 True Az=63.885 Ze=-68.01 Az status=0009 Ze status=0009 01:31:07 Check angles 01:31:07 SkyScan query 01:31:08 SkyScan query done: ret=0 az=81.195<-5413 ze=-88.98<-17932 Statuses=0009 0009 01:31:08 Msec=750 True Az=81.195 Ze=-88.98 Az status=0009 Ze status=0009 01:31:08 Check angles 01:31:08 SkyScan query 01:31:09 SkyScan query done: ret=0 az=98.685<-6579 ze=-109.905<-19327 Statuses=0009 0009 01:31:09 Msec=1500 True Az=98.685 Ze=-109.905 Az status=0009 Ze status=0009 01:31:09 Check angles 01:31:09 SkyScan query 01:31:10 SkyScan query done: ret=0 az=116.25<-7750 ze=-130.875<-20725 Statuses=0009 0009 01:31:10 Msec=2250 True Az=116.25 Ze=-130.875 Az status=0009 Ze status=0009 01:31:10 Check angles 01:31:10 SkyScan query 01:31:10 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 01:31:10 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 01:31:10 Check angles 01:31:10 SkyScan query 01:31:11 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:31:11 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:31:11 Message to Master queued w/err=0: serial=126394 error=0 01:31:16 Received message from Master: op=Filter serial=126395 01:31:16 Color wheel filter change from 0 to 0 01:31:16 FLIGetFilterPos err=0 currentPosition=0 01:31:16 FLIGetStepsRemaining err=0 RemainingSteps=0 01:31:16 Filter is already there-color wheel unchanged 01:31:16 Received message from Master: op=Shutter serial=126396 01:31:16 Shutter LASER close 01:31:16 Received message from Camera: op=State serial=126398 01:31:16 GetSingleValue result=40 Value=cccccccc 01:31:16 SkyScan query 01:31:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:31:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:31:17 Parameters OK 01:31:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:31:17 Set A/D data flow result=40 01:31:17 Set A/D channel type result=40 01:31:17 Set A/D encoding result=40 01:31:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:31:17 Set channel filter=0.000000e+000 result=40 01:31:17 Config A/D Result=40 01:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:31:17 Get A/D filter: -9.255963e+061 result=40 01:31:17 Get A/D value=-858993460 result=40 01:31:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:31:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:31:17 Parameters OK 01:31:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:31:17 Set A/D data flow result=40 01:31:17 Set A/D channel type result=40 01:31:17 Set A/D encoding result=40 01:31:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:31:17 Set channel filter=0.000000e+000 result=40 01:31:17 Config A/D Result=40 01:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:31:17 Get A/D filter: -9.255963e+061 result=40 01:31:17 Get A/D value=-858993460 result=40 01:31:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:31:17 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:31:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:31:17 Aux= 01:31:17 Message to Camera, serial 126398 queued 01:31:54 Received message from Master: op=PointingHead serial=126411 01:31:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:31:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:31:54 Point started: ret=0 01:31:54 point_skyscan result=0 01:31:55 Check angles 01:31:55 SkyScan query 01:31:55 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 01:31:55 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 01:31:55 Check angles 01:31:55 SkyScan query 01:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:31:56 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:31:56 Message to Master queued w/err=0: serial=126411 error=0 01:32:01 Received message from Master: op=Filter serial=126412 01:32:01 Color wheel filter change from 0 to 0 01:32:01 FLIGetFilterPos err=0 currentPosition=0 01:32:01 FLIGetStepsRemaining err=0 RemainingSteps=0 01:32:01 Filter is already there-color wheel unchanged 01:32:01 Received message from Master: op=Shutter serial=126413 01:32:01 Shutter LASER open 01:32:01 Received message from Camera: op=State serial=126415 01:32:01 GetSingleValue result=40 Value=cccccccc 01:32:01 SkyScan query 01:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:32:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:02 Parameters OK 01:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:02 Set A/D data flow result=40 01:32:02 Set A/D channel type result=40 01:32:02 Set A/D encoding result=40 01:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:02 Set channel filter=0.000000e+000 result=40 01:32:02 Config A/D Result=40 01:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:02 Get A/D filter: -9.255963e+061 result=40 01:32:02 Get A/D value=-858993460 result=40 01:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:02 Parameters OK 01:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:02 Set A/D data flow result=40 01:32:02 Set A/D channel type result=40 01:32:02 Set A/D encoding result=40 01:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:02 Set channel filter=0.000000e+000 result=40 01:32:02 Config A/D Result=40 01:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:02 Get A/D filter: -9.255963e+061 result=40 01:32:02 Get A/D value=-858993460 result=40 01:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:32:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:32:02 Aux= 01:32:02 Message to Camera, serial 126415 queued 01:32:10 Received message from Master: op=Shutter serial=126425 01:32:10 Shutter LASER close 01:32:11 Received message from Master: op=PointingHead serial=126429 01:32:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:32:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:32:11 Point started: ret=0 01:32:11 point_skyscan result=0 01:32:12 Check angles 01:32:12 SkyScan query 01:32:13 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.49<-21566 Statuses=0009 0009 01:32:13 Msec=0 True Az=135.72 Ze=-143.49 Az status=0009 Ze status=0009 01:32:13 Check angles 01:32:13 SkyScan query 01:32:13 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.07<-20138 Statuses=0009 0009 01:32:13 Msec=750 True Az=153.615 Ze=-122.07 Az status=0009 Ze status=0009 01:32:14 Check angles 01:32:14 SkyScan query 01:32:14 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.145<-18743 Statuses=0009 0009 01:32:14 Msec=1500 True Az=171.225 Ze=-101.145 Az status=0009 Ze status=0009 01:32:14 Check angles 01:32:14 SkyScan query 01:32:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 01:32:15 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 01:32:15 Check angles 01:32:15 SkyScan query 01:32:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.77<-15918 Statuses=0008 0009 01:32:16 Msec=3000 True Az=176.01 Ze=-58.77 Az status=0008 Ze status=0009 01:32:16 Check angles 01:32:16 SkyScan query 01:32:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:32:16 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:32:16 Message to Master queued w/err=0: serial=126429 error=0 01:32:21 Received message from Master: op=Filter serial=126430 01:32:21 Color wheel filter change from 0 to 0 01:32:21 FLIGetFilterPos err=0 currentPosition=0 01:32:21 FLIGetStepsRemaining err=0 RemainingSteps=0 01:32:21 Filter is already there-color wheel unchanged 01:32:22 Received message from Master: op=Shutter serial=126431 01:32:22 Shutter LASER close 01:32:22 Received message from Camera: op=State serial=126433 01:32:22 GetSingleValue result=40 Value=cccccccc 01:32:22 SkyScan query 01:32:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:32:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:22 Parameters OK 01:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:22 Set A/D data flow result=40 01:32:22 Set A/D channel type result=40 01:32:22 Set A/D encoding result=40 01:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:22 Set channel filter=0.000000e+000 result=40 01:32:22 Config A/D Result=40 01:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:22 Get A/D filter: -9.255963e+061 result=40 01:32:22 Get A/D value=-858993460 result=40 01:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:22 Parameters OK 01:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:22 Set A/D data flow result=40 01:32:22 Set A/D channel type result=40 01:32:22 Set A/D encoding result=40 01:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:22 Set channel filter=0.000000e+000 result=40 01:32:22 Config A/D Result=40 01:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:22 Get A/D filter: -9.255963e+061 result=40 01:32:22 Get A/D value=-858993460 result=40 01:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:32:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:32:22 Aux= 01:32:22 Message to Camera, serial 126433 queued 01:32:59 Received message from Master: op=PointingHead serial=126445 01:32:59 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:32:59 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:32:59 Point started: ret=0 01:32:59 point_skyscan result=0 01:33:00 Check angles 01:33:00 SkyScan query 01:33:00 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.9<-13460 Statuses=0009 0009 01:33:00 Msec=0 True Az=152.94 Ze=-21.9 Az status=0009 Ze status=0009 01:33:00 Check angles 01:33:00 SkyScan query 01:33:01 SkyScan query done: ret=0 az=135.63<-9042 ze=-0.9<-12060 Statuses=0009 0009 01:33:01 Msec=750 True Az=135.63 Ze=-0.9 Az status=0009 Ze status=0009 01:33:01 Check angles 01:33:01 SkyScan query 01:33:02 SkyScan query done: ret=0 az=117.57<-7838 ze=20.46<-10636 Statuses=0009 0009 01:33:02 Msec=1500 True Az=117.57 Ze=20.46 Az status=0009 Ze status=0009 01:33:02 Check angles 01:33:02 SkyScan query 01:33:02 SkyScan query done: ret=0 az=100.305<-6687 ze=41.46<-9236 Statuses=0009 0009 01:33:02 Msec=2250 True Az=100.305 Ze=41.46 Az status=0009 Ze status=0009 01:33:03 Check angles 01:33:03 SkyScan query 01:33:03 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 01:33:03 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 01:33:03 Check angles 01:33:03 SkyScan query 01:33:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:33:04 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:33:04 Message to Master queued w/err=0: serial=126445 error=0 01:33:09 Received message from Master: op=Filter serial=126446 01:33:09 Color wheel filter change from 0 to 0 01:33:09 FLIGetFilterPos err=0 currentPosition=0 01:33:09 FLIGetStepsRemaining err=0 RemainingSteps=0 01:33:09 Filter is already there-color wheel unchanged 01:33:09 Received message from Master: op=Shutter serial=126447 01:33:09 Shutter LASER close 01:33:09 Received message from Camera: op=State serial=126449 01:33:09 GetSingleValue result=40 Value=cccccccc 01:33:09 SkyScan query 01:33:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:33:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:10 Parameters OK 01:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:10 Set A/D data flow result=40 01:33:10 Set A/D channel type result=40 01:33:10 Set A/D encoding result=40 01:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:10 Set channel filter=0.000000e+000 result=40 01:33:10 Config A/D Result=40 01:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:10 Get A/D filter: -9.255963e+061 result=40 01:33:10 Get A/D value=-858993460 result=40 01:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:10 Parameters OK 01:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:10 Set A/D data flow result=40 01:33:10 Set A/D channel type result=40 01:33:10 Set A/D encoding result=40 01:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:10 Set channel filter=0.000000e+000 result=40 01:33:10 Config A/D Result=40 01:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:10 Get A/D filter: -9.255963e+061 result=40 01:33:10 Get A/D value=-858993460 result=40 01:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:33:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:33:10 Aux= 01:33:10 Message to Camera, serial 126449 queued 01:33:47 Received message from Master: op=PointingHead serial=126462 01:33:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:33:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:33:47 Point started: ret=0 01:33:47 point_skyscan result=0 01:33:48 Check angles 01:33:48 SkyScan query 01:33:48 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 01:33:48 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 01:33:48 Check angles 01:33:48 SkyScan query 01:33:49 SkyScan query done: ret=0 az=126.75<-8450 ze=38.49<-9434 Statuses=0009 0008 01:33:49 Msec=750 True Az=126.75 Ze=38.49 Az status=0009 Ze status=0008 01:33:49 Check angles 01:33:49 SkyScan query 01:33:50 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 01:33:50 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 01:33:50 Check angles 01:33:50 SkyScan query 01:33:51 SkyScan query done: ret=0 az=161.625<-10775 ze=38.505<-9433 Statuses=0009 0008 01:33:51 Msec=2250 True Az=161.625 Ze=38.505 Az status=0009 Ze status=0008 01:33:51 Check angles 01:33:51 SkyScan query 01:33:51 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:33:51 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:33:51 Check angles 01:33:51 SkyScan query 01:33:52 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:33:52 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:33:52 Message to Master queued w/err=0: serial=126462 error=0 01:33:57 Received message from Master: op=Filter serial=126463 01:33:57 Color wheel filter change from 0 to 0 01:33:57 FLIGetFilterPos err=0 currentPosition=0 01:33:57 FLIGetStepsRemaining err=0 RemainingSteps=0 01:33:57 Filter is already there-color wheel unchanged 01:33:57 Received message from Master: op=Shutter serial=126464 01:33:57 Shutter LASER close 01:33:57 Received message from Camera: op=State serial=126466 01:33:57 GetSingleValue result=40 Value=cccccccc 01:33:57 SkyScan query 01:33:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:33:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:58 Parameters OK 01:33:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:58 Set A/D data flow result=40 01:33:58 Set A/D channel type result=40 01:33:58 Set A/D encoding result=40 01:33:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:58 Set channel filter=0.000000e+000 result=40 01:33:58 Config A/D Result=40 01:33:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:58 Get A/D filter: -9.255963e+061 result=40 01:33:58 Get A/D value=-858993460 result=40 01:33:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:58 Parameters OK 01:33:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:58 Set A/D data flow result=40 01:33:58 Set A/D channel type result=40 01:33:58 Set A/D encoding result=40 01:33:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:58 Set channel filter=0.000000e+000 result=40 01:33:58 Config A/D Result=40 01:33:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:58 Get A/D filter: -9.255963e+061 result=40 01:33:58 Get A/D value=-858993460 result=40 01:33:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:33:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:33:58 Aux= 01:33:58 Message to Camera, serial 126466 queued 01:34:35 Received message from Master: op=PointingHead serial=126479 01:34:35 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:34:35 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:34:35 Point started: ret=0 01:34:35 point_skyscan result=0 01:34:36 Check angles 01:34:36 SkyScan query 01:34:36 SkyScan query done: ret=0 az=153.09<-10206 ze=8.775<-11415 Statuses=0009 0009 01:34:36 Msec=0 True Az=153.09 Ze=8.775 Az status=0009 Ze status=0009 01:34:37 Check angles 01:34:37 SkyScan query 01:34:37 SkyScan query done: ret=0 az=135.225<-9015 ze=-12.57<-12838 Statuses=0009 0009 01:34:37 Msec=750 True Az=135.225 Ze=-12.57 Az status=0009 Ze status=0009 01:34:37 Check angles 01:34:37 SkyScan query 01:34:38 SkyScan query done: ret=0 az=117.705<-7847 ze=-33.54<-14236 Statuses=0009 0009 01:34:38 Msec=1500 True Az=117.705 Ze=-33.54 Az status=0009 Ze status=0009 01:34:38 Check angles 01:34:38 SkyScan query 01:34:39 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.555<-15437 Statuses=0009 0009 01:34:39 Msec=2250 True Az=100.365 Ze=-51.555 Az status=0009 Ze status=0009 01:34:39 Check angles 01:34:39 SkyScan query 01:34:39 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:34:39 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:34:40 Check angles 01:34:40 SkyScan query 01:34:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:34:40 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:34:40 Message to Master queued w/err=0: serial=126479 error=0 01:34:45 Received message from Master: op=Filter serial=126480 01:34:45 Color wheel filter change from 0 to 0 01:34:45 FLIGetFilterPos err=0 currentPosition=0 01:34:45 FLIGetStepsRemaining err=0 RemainingSteps=0 01:34:45 Filter is already there-color wheel unchanged 01:34:45 Received message from Master: op=Shutter serial=126481 01:34:45 Shutter LASER close 01:34:45 Received message from Camera: op=State serial=126483 01:34:45 GetSingleValue result=40 Value=cccccccc 01:34:45 SkyScan query 01:34:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:34:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:34:46 Parameters OK 01:34:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:34:46 Set A/D data flow result=40 01:34:46 Set A/D channel type result=40 01:34:46 Set A/D encoding result=40 01:34:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:34:46 Set channel filter=0.000000e+000 result=40 01:34:46 Config A/D Result=40 01:34:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:34:46 Get A/D filter: -9.255963e+061 result=40 01:34:46 Get A/D value=-858993460 result=40 01:34:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:34:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:34:46 Parameters OK 01:34:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:34:46 Set A/D data flow result=40 01:34:46 Set A/D channel type result=40 01:34:46 Set A/D encoding result=40 01:34:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:34:46 Set channel filter=0.000000e+000 result=40 01:34:46 Config A/D Result=40 01:34:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:34:46 Get A/D filter: -9.255963e+061 result=40 01:34:46 Get A/D value=-858993460 result=40 01:34:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:34:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:34:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:34:46 Aux= 01:34:46 Message to Camera, serial 126483 queued 01:35:23 Received message from Master: op=PointingHead serial=126496 01:35:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:35:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:35:23 Point started: ret=0 01:35:23 point_skyscan result=0 01:35:24 Check angles 01:35:24 SkyScan query 01:35:24 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.285<-17419 Statuses=0009 0009 01:35:24 Msec=0 True Az=109.02 Ze=-81.285 Az status=0009 Ze status=0009 01:35:25 Check angles 01:35:25 SkyScan query 01:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.69<-18846 Statuses=0008 0009 01:35:25 Msec=750 True Az=112.995 Ze=-102.69 Az status=0008 Ze status=0009 01:35:25 Check angles 01:35:25 SkyScan query 01:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.72<-20248 Statuses=0008 0009 01:35:26 Msec=1500 True Az=112.995 Ze=-123.72 Az status=0008 Ze status=0009 01:35:26 Check angles 01:35:26 SkyScan query 01:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 01:35:27 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 01:35:27 Check angles 01:35:27 SkyScan query 01:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 01:35:27 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 01:35:28 Check angles 01:35:28 SkyScan query 01:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:35:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:35:28 Message to Master queued w/err=0: serial=126496 error=0 01:35:33 Received message from Master: op=Filter serial=126497 01:35:33 Color wheel filter change from 0 to 0 01:35:33 FLIGetFilterPos err=0 currentPosition=0 01:35:33 FLIGetStepsRemaining err=0 RemainingSteps=0 01:35:33 Filter is already there-color wheel unchanged 01:35:33 Received message from Master: op=Shutter serial=126498 01:35:33 Shutter LASER open 01:35:34 Received message from Camera: op=State serial=126500 01:35:34 GetSingleValue result=40 Value=cccccccc 01:35:34 SkyScan query 01:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:35:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:34 Parameters OK 01:35:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:34 Set A/D data flow result=40 01:35:34 Set A/D channel type result=40 01:35:34 Set A/D encoding result=40 01:35:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:34 Set channel filter=0.000000e+000 result=40 01:35:34 Config A/D Result=40 01:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2018-12-14 01:35:34] 01:35:34 Get A/D filter: -9.255963e+061 result=40 01:35:34 Get A/D value=-858993460 result=40 01:35:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:34 Parameters OK 01:35:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:34 Set A/D data flow result=40 01:35:34 Set A/D channel type result=40 01:35:34 Set A/D encoding result=40 01:35:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:34 Set channel filter=0.000000e+000 result=40 01:35:34 Config A/D Result=40 01:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:34 Get A/D filter: -9.255963e+061 result=40 01:35:34 Get A/D value=-858993460 result=40 01:35:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:35:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:35:34 Aux= 01:35:34 Message to Camera, serial 126500 queued 01:35:43 Received message from Master: op=Shutter serial=126510 01:35:43 Shutter LASER close 01:35:43 Received message from Master: op=PointingHead serial=126514 01:35:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:35:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:35:43 Point started: ret=0 01:35:43 point_skyscan result=0 01:35:44 Check angles 01:35:44 SkyScan query 01:35:45 SkyScan query done: ret=0 az=90.15<-6010 ze=157.485<-1501 Statuses=0009 0009 01:35:45 Msec=0 True Az=90.15 Ze=157.485 Az status=0009 Ze status=0009 01:35:45 Check angles 01:35:45 SkyScan query 01:35:45 SkyScan query done: ret=0 az=72.3<-4820 ze=136.065<-2929 Statuses=0009 0009 01:35:45 Msec=750 True Az=72.3 Ze=136.065 Az status=0009 Ze status=0009 01:35:46 Check angles 01:35:46 SkyScan query 01:35:46 SkyScan query done: ret=0 az=54.915<-3661 ze=115.125<-4325 Statuses=0009 0009 01:35:46 Msec=1500 True Az=54.915 Ze=115.125 Az status=0009 Ze status=0009 01:35:46 Check angles 01:35:46 SkyScan query 01:35:47 SkyScan query done: ret=0 az=40.98<-2732 ze=94.065<-5729 Statuses=0009 0009 01:35:47 Msec=2250 True Az=40.98 Ze=94.065 Az status=0009 Ze status=0009 01:35:47 Check angles 01:35:47 SkyScan query 01:35:48 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 01:35:48 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 01:35:48 Check angles 01:35:48 SkyScan query 01:35:48 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 01:35:48 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 01:35:49 Check angles 01:35:49 SkyScan query 01:35:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:35:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:35:49 Message to Master queued w/err=0: serial=126514 error=0 [UTC 2018-12-14 01:35:52] 01:35:54 Received message from Master: op=Filter serial=126515 01:35:54 Color wheel filter change from 0 to 0 01:35:54 FLIGetFilterPos err=0 currentPosition=0 01:35:54 FLIGetStepsRemaining err=0 RemainingSteps=0 01:35:54 Filter is already there-color wheel unchanged 01:35:54 Received message from Master: op=Shutter serial=126516 01:35:54 Shutter LASER close 01:35:55 Received message from Camera: op=State serial=126518 01:35:55 GetSingleValue result=40 Value=cccccccc 01:35:55 SkyScan query 01:35:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:35:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:55 Parameters OK 01:35:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:55 Set A/D data flow result=40 01:35:55 Set A/D channel type result=40 01:35:55 Set A/D encoding result=40 01:35:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:55 Set channel filter=0.000000e+000 result=40 01:35:55 Config A/D Result=40 01:35:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:55 Get A/D filter: -9.255963e+061 result=40 01:35:55 Get A/D value=-858993460 result=40 01:35:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:55 Parameters OK 01:35:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:55 Set A/D data flow result=40 01:35:55 Set A/D channel type result=40 01:35:55 Set A/D encoding result=40 01:35:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:55 Set channel filter=0.000000e+000 result=40 01:35:55 Config A/D Result=40 01:35:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:55 Get A/D filter: -9.255963e+061 result=40 01:35:55 Get A/D value=-858993460 result=40 01:35:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:35:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:35:55 Aux= 01:35:55 Message to Camera, serial 126518 queued 01:36:32 Received message from Master: op=PointingHead serial=126531 01:36:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:36:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:36:32 Point started: ret=0 01:36:32 point_skyscan result=0 01:36:33 Check angles 01:36:33 SkyScan query 01:36:34 SkyScan query done: ret=0 az=40.995<-2733 ze=21.6<-10560 Statuses=0008 0009 01:36:34 Msec=0 True Az=40.995 Ze=21.6 Az status=0008 Ze status=0009 01:36:34 Check angles 01:36:34 SkyScan query 01:36:35 SkyScan query done: ret=0 az=40.995<-2733 ze=0.645<-11957 Statuses=0008 0009 01:36:35 Msec=750 True Az=40.995 Ze=0.645 Az status=0008 Ze status=0009 01:36:35 Check angles 01:36:35 SkyScan query 01:36:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.31<-13354 Statuses=0008 0009 01:36:35 Msec=1500 True Az=40.995 Ze=-20.31 Az status=0008 Ze status=0009 01:36:35 Check angles 01:36:35 SkyScan query 01:36:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 01:36:36 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 01:36:36 Check angles 01:36:36 SkyScan query 01:36:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:36:37 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:36:37 Message to Master queued w/err=0: serial=126531 error=0 01:36:42 Received message from Master: op=Filter serial=126532 01:36:42 Color wheel filter change from 0 to 0 01:36:42 FLIGetFilterPos err=0 currentPosition=0 01:36:42 FLIGetStepsRemaining err=0 RemainingSteps=0 01:36:42 Filter is already there-color wheel unchanged 01:36:42 Received message from Master: op=Shutter serial=126533 01:36:42 Shutter LASER close 01:36:42 Received message from Camera: op=State serial=126535 01:36:42 GetSingleValue result=40 Value=cccccccc 01:36:42 SkyScan query 01:36:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:36:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:36:43 Parameters OK 01:36:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:36:43 Set A/D data flow result=40 01:36:43 Set A/D channel type result=40 01:36:43 Set A/D encoding result=40 01:36:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:36:43 Set channel filter=0.000000e+000 result=40 01:36:43 Config A/D Result=40 01:36:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:36:43 Get A/D filter: -9.255963e+061 result=40 01:36:43 Get A/D value=-858993460 result=40 01:36:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:36:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:36:43 Parameters OK 01:36:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:36:43 Set A/D data flow result=40 01:36:43 Set A/D channel type result=40 01:36:43 Set A/D encoding result=40 01:36:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:36:43 Set channel filter=0.000000e+000 result=40 01:36:43 Config A/D Result=40 01:36:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:36:43 Get A/D filter: -9.255963e+061 result=40 01:36:43 Get A/D value=-858993460 result=40 01:36:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:36:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:36:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:36:43 Aux= 01:36:43 Message to Camera, serial 126535 queued 01:37:19 Received message from Master: op=PointingHead serial=126548 01:37:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:37:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:37:20 Point started: ret=0 01:37:20 point_skyscan result=0 01:37:20 Check angles 01:37:20 SkyScan query 01:37:21 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.34<-16556 Statuses=0009 0009 01:37:21 Msec=0 True Az=64.02 Ze=-68.34 Az status=0009 Ze status=0009 01:37:21 Check angles 01:37:21 SkyScan query 01:37:22 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.325<-17955 Statuses=0009 0009 01:37:22 Msec=750 True Az=81.315 Ze=-89.325 Az status=0009 Ze status=0009 01:37:22 Check angles 01:37:22 SkyScan query 01:37:23 SkyScan query done: ret=0 az=98.88<-6592 ze=-110.28<-19352 Statuses=0009 0009 01:37:23 Msec=1500 True Az=98.88 Ze=-110.28 Az status=0009 Ze status=0009 01:37:23 Check angles 01:37:23 SkyScan query 01:37:23 SkyScan query done: ret=0 az=116.865<-7791 ze=-131.64<-20776 Statuses=0009 0009 01:37:23 Msec=2250 True Az=116.865 Ze=-131.64 Az status=0009 Ze status=0009 01:37:23 Check angles 01:37:23 SkyScan query 01:37:24 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 01:37:24 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 01:37:24 Check angles 01:37:24 SkyScan query 01:37:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:37:25 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:37:25 Message to Master queued w/err=0: serial=126548 error=0 01:37:30 Received message from Master: op=Filter serial=126549 01:37:30 Color wheel filter change from 0 to 0 01:37:30 FLIGetFilterPos err=0 currentPosition=0 01:37:30 FLIGetStepsRemaining err=0 RemainingSteps=0 01:37:30 Filter is already there-color wheel unchanged 01:37:30 Received message from Master: op=Shutter serial=126550 01:37:30 Shutter LASER close 01:37:30 Received message from Camera: op=State serial=126552 01:37:30 GetSingleValue result=40 Value=cccccccc 01:37:30 SkyScan query 01:37:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:37:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:37:31 Parameters OK 01:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:37:31 Set A/D data flow result=40 01:37:31 Set A/D channel type result=40 01:37:31 Set A/D encoding result=40 01:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:37:31 Set channel filter=0.000000e+000 result=40 01:37:31 Config A/D Result=40 01:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:37:31 Get A/D filter: -9.255963e+061 result=40 01:37:31 Get A/D value=-858993460 result=40 01:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:37:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:37:31 Parameters OK 01:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:37:31 Set A/D data flow result=40 01:37:31 Set A/D channel type result=40 01:37:31 Set A/D encoding result=40 01:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:37:31 Set channel filter=0.000000e+000 result=40 01:37:31 Config A/D Result=40 01:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:37:31 Get A/D filter: -9.255963e+061 result=40 01:37:31 Get A/D value=-858993460 result=40 01:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:37:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:37:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:37:31 Aux= 01:37:31 Message to Camera, serial 126552 queued 01:38:07 Received message from Master: op=PointingHead serial=126565 01:38:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:38:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:38:08 Point started: ret=0 01:38:08 point_skyscan result=0 01:38:09 Check angles 01:38:09 SkyScan query 01:38:09 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 01:38:09 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 01:38:09 Check angles 01:38:09 SkyScan query 01:38:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:38:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:38:10 Message to Master queued w/err=0: serial=126565 error=0 01:38:15 Received message from Master: op=Filter serial=126566 01:38:15 Color wheel filter change from 0 to 0 01:38:15 FLIGetFilterPos err=0 currentPosition=0 01:38:15 FLIGetStepsRemaining err=0 RemainingSteps=0 01:38:15 Filter is already there-color wheel unchanged 01:38:15 Received message from Master: op=Shutter serial=126567 01:38:15 Shutter LASER open 01:38:15 Received message from Camera: op=State serial=126569 01:38:15 GetSingleValue result=40 Value=cccccccc 01:38:15 SkyScan query 01:38:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:38:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:16 Parameters OK 01:38:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:16 Set A/D data flow result=40 01:38:16 Set A/D channel type result=40 01:38:16 Set A/D encoding result=40 01:38:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:16 Set channel filter=0.000000e+000 result=40 01:38:16 Config A/D Result=40 01:38:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:16 Get A/D filter: -9.255963e+061 result=40 01:38:16 Get A/D value=-858993460 result=40 01:38:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:16 Parameters OK 01:38:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:16 Set A/D data flow result=40 01:38:16 Set A/D channel type result=40 01:38:16 Set A/D encoding result=40 01:38:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:16 Set channel filter=0.000000e+000 result=40 01:38:16 Config A/D Result=40 01:38:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:16 Get A/D filter: -9.255963e+061 result=40 01:38:16 Get A/D value=-858993460 result=40 01:38:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:38:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:38:16 Aux= 01:38:16 Message to Camera, serial 126569 queued 01:38:24 Received message from Master: op=Shutter serial=126579 01:38:24 Shutter LASER close 01:38:25 Received message from Master: op=PointingHead serial=126583 01:38:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:38:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:38:25 Point started: ret=0 01:38:25 point_skyscan result=0 01:38:26 Check angles 01:38:26 SkyScan query 01:38:26 SkyScan query done: ret=0 az=136.41<-9094 ze=-142.65<-21510 Statuses=0009 0009 01:38:26 Msec=0 True Az=136.41 Ze=-142.65 Az status=0009 Ze status=0009 01:38:27 Check angles 01:38:27 SkyScan query 01:38:27 SkyScan query done: ret=0 az=154.26<-10284 ze=-121.32<-20088 Statuses=0009 0009 01:38:27 Msec=750 True Az=154.26 Ze=-121.32 Az status=0009 Ze status=0009 01:38:27 Check angles 01:38:27 SkyScan query 01:38:28 SkyScan query done: ret=0 az=171.735<-11449 ze=-100.275<-18685 Statuses=0009 0009 01:38:28 Msec=1500 True Az=171.735 Ze=-100.275 Az status=0009 Ze status=0009 01:38:28 Check angles 01:38:28 SkyScan query 01:38:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.365<-17291 Statuses=0008 0009 01:38:29 Msec=2250 True Az=176.01 Ze=-79.365 Az status=0008 Ze status=0009 01:38:29 Check angles 01:38:29 SkyScan query 01:38:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-57.975<-15865 Statuses=0008 0009 01:38:29 Msec=3000 True Az=176.01 Ze=-57.975 Az status=0008 Ze status=0009 01:38:30 Check angles 01:38:30 SkyScan query 01:38:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 01:38:30 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 01:38:30 Message to Master queued w/err=0: serial=126583 error=0 01:38:35 Received message from Master: op=Filter serial=126584 01:38:35 Color wheel filter change from 0 to 0 01:38:35 FLIGetFilterPos err=0 currentPosition=0 01:38:35 FLIGetStepsRemaining err=0 RemainingSteps=0 01:38:35 Filter is already there-color wheel unchanged 01:38:35 Received message from Master: op=Shutter serial=126585 01:38:35 Shutter LASER close 01:38:36 Received message from Camera: op=State serial=126587 01:38:36 GetSingleValue result=40 Value=cccccccc 01:38:36 SkyScan query 01:38:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:38:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:36 Parameters OK 01:38:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:36 Set A/D data flow result=40 01:38:36 Set A/D channel type result=40 01:38:36 Set A/D encoding result=40 01:38:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:36 Set channel filter=0.000000e+000 result=40 01:38:36 Config A/D Result=40 01:38:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:36 Get A/D filter: -9.255963e+061 result=40 01:38:36 Get A/D value=-858993460 result=40 01:38:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:36 Parameters OK 01:38:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:36 Set A/D data flow result=40 01:38:36 Set A/D channel type result=40 01:38:36 Set A/D encoding result=40 01:38:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:36 Set channel filter=0.000000e+000 result=40 01:38:36 Config A/D Result=40 01:38:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:36 Get A/D filter: -9.255963e+061 result=40 01:38:36 Get A/D value=-858993460 result=40 01:38:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:38:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:38:36 Aux= 01:38:36 Message to Camera, serial 126587 queued 01:39:13 Received message from Master: op=PointingHead serial=126600 01:39:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:39:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:39:13 Point started: ret=0 01:39:13 point_skyscan result=0 01:39:14 Check angles 01:39:14 SkyScan query 01:39:15 SkyScan query done: ret=0 az=152.64<-10176 ze=-21.345<-13423 Statuses=0009 0009 01:39:15 Msec=0 True Az=152.64 Ze=-21.345 Az status=0009 Ze status=0009 01:39:15 Check angles 01:39:15 SkyScan query 01:39:15 SkyScan query done: ret=0 az=134.76<-8984 ze=0.045<-11997 Statuses=0009 0009 01:39:15 Msec=750 True Az=134.76 Ze=0.045 Az status=0009 Ze status=0009 01:39:16 Check angles 01:39:16 SkyScan query 01:39:16 SkyScan query done: ret=0 az=117.315<-7821 ze=21.03<-10598 Statuses=0009 0009 01:39:16 Msec=1500 True Az=117.315 Ze=21.03 Az status=0009 Ze status=0009 01:39:16 Check angles 01:39:16 SkyScan query 01:39:17 SkyScan query done: ret=0 az=99.915<-6661 ze=41.97<-9202 Statuses=0009 0009 01:39:17 Msec=2250 True Az=99.915 Ze=41.97 Az status=0009 Ze status=0009 01:39:17 Check angles 01:39:17 SkyScan query 01:39:18 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 01:39:18 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 01:39:18 Check angles 01:39:18 SkyScan query 01:39:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:39:18 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:39:18 Message to Master queued w/err=0: serial=126600 error=0 01:39:23 Received message from Master: op=Filter serial=126601 01:39:23 Color wheel filter change from 0 to 0 01:39:23 FLIGetFilterPos err=0 currentPosition=0 01:39:23 FLIGetStepsRemaining err=0 RemainingSteps=0 01:39:23 Filter is already there-color wheel unchanged 01:39:24 Received message from Master: op=Shutter serial=126602 01:39:24 Shutter LASER close 01:39:24 Received message from Camera: op=State serial=126604 01:39:24 GetSingleValue result=40 Value=cccccccc 01:39:24 SkyScan query 01:39:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:39:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:39:24 Parameters OK 01:39:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:39:24 Set A/D data flow result=40 01:39:24 Set A/D channel type result=40 01:39:24 Set A/D encoding result=40 01:39:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:39:24 Set channel filter=0.000000e+000 result=40 01:39:24 Config A/D Result=40 01:39:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:39:24 Get A/D filter: -9.255963e+061 result=40 01:39:24 Get A/D value=-858993460 result=40 01:39:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:39:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:39:24 Parameters OK 01:39:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:39:24 Set A/D data flow result=40 01:39:24 Set A/D channel type result=40 01:39:24 Set A/D encoding result=40 01:39:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:39:24 Set channel filter=0.000000e+000 result=40 01:39:24 Config A/D Result=40 01:39:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:39:24 Get A/D filter: -9.255963e+061 result=40 01:39:24 Get A/D value=-858993460 result=40 01:39:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:39:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:39:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:39:24 Aux= 01:39:24 Message to Camera, serial 126604 queued 01:40:01 Received message from Master: op=PointingHead serial=126617 01:40:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:40:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:40:01 Point started: ret=0 01:40:01 point_skyscan result=0 01:40:02 Check angles 01:40:02 SkyScan query 01:40:03 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 01:40:03 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 01:40:03 Check angles 01:40:03 SkyScan query 01:40:03 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 01:40:03 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 01:40:04 Check angles 01:40:04 SkyScan query 01:40:04 SkyScan query done: ret=0 az=144.3<-9620 ze=38.505<-9433 Statuses=0009 0008 01:40:04 Msec=1500 True Az=144.3 Ze=38.505 Az status=0009 Ze status=0008 01:40:04 Check angles 01:40:04 SkyScan query 01:40:05 SkyScan query done: ret=0 az=161.61<-10774 ze=38.505<-9433 Statuses=0009 0008 01:40:05 Msec=2250 True Az=161.61 Ze=38.505 Az status=0009 Ze status=0008 01:40:05 Check angles 01:40:05 SkyScan query 01:40:06 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:40:06 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:40:06 Check angles 01:40:06 SkyScan query 01:40:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:40:06 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:40:06 Message to Master queued w/err=0: serial=126617 error=0 01:40:11 Received message from Master: op=Filter serial=126618 01:40:11 Color wheel filter change from 0 to 0 01:40:11 FLIGetFilterPos err=0 currentPosition=0 01:40:11 FLIGetStepsRemaining err=0 RemainingSteps=0 01:40:11 Filter is already there-color wheel unchanged 01:40:12 Received message from Master: op=Shutter serial=126619 01:40:12 Shutter LASER close 01:40:12 Received message from Camera: op=State serial=126621 01:40:12 GetSingleValue result=40 Value=cccccccc 01:40:12 SkyScan query 01:40:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:40:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:12 Parameters OK 01:40:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:12 Set A/D data flow result=40 01:40:12 Set A/D channel type result=40 01:40:12 Set A/D encoding result=40 01:40:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:12 Set channel filter=0.000000e+000 result=40 01:40:12 Config A/D Result=40 01:40:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:12 Get A/D filter: -9.255963e+061 result=40 01:40:12 Get A/D value=-858993460 result=40 01:40:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:12 Parameters OK 01:40:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:12 Set A/D data flow result=40 01:40:12 Set A/D channel type result=40 01:40:12 Set A/D encoding result=40 01:40:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:12 Set channel filter=0.000000e+000 result=40 01:40:12 Config A/D Result=40 01:40:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:12 Get A/D filter: -9.255963e+061 result=40 01:40:12 Get A/D value=-858993460 result=40 01:40:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:40:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:40:12 Aux= 01:40:12 Message to Camera, serial 126621 queued 01:40:49 Received message from Master: op=PointingHead serial=126634 01:40:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:40:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:40:49 Point started: ret=0 01:40:49 point_skyscan result=0 01:40:50 Check angles 01:40:50 SkyScan query 01:40:51 SkyScan query done: ret=0 az=152.91<-10194 ze=8.49<-11434 Statuses=0009 0009 01:40:51 Msec=0 True Az=152.91 Ze=8.49 Az status=0009 Ze status=0009 01:40:51 Check angles 01:40:51 SkyScan query 01:40:52 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.435<-12829 Statuses=0009 0009 01:40:52 Msec=750 True Az=135.405 Ze=-12.435 Az status=0009 Ze status=0009 01:40:52 Check angles 01:40:52 SkyScan query 01:40:52 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.855<-14257 Statuses=0009 0009 01:40:52 Msec=1500 True Az=117.555 Ze=-33.855 Az status=0009 Ze status=0009 01:40:52 Check angles 01:40:52 SkyScan query 01:40:53 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 01:40:53 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 01:40:53 Check angles 01:40:53 SkyScan query 01:40:54 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 01:40:54 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 01:40:54 Check angles 01:40:54 SkyScan query 01:40:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:40:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:40:55 Message to Master queued w/err=0: serial=126634 error=0 01:41:00 Received message from Master: op=Filter serial=126635 01:41:00 Color wheel filter change from 0 to 0 01:41:00 FLIGetFilterPos err=0 currentPosition=0 01:41:00 FLIGetStepsRemaining err=0 RemainingSteps=0 01:41:00 Filter is already there-color wheel unchanged 01:41:00 Received message from Master: op=Shutter serial=126636 01:41:00 Shutter LASER close 01:41:00 Received message from Camera: op=State serial=126638 01:41:00 GetSingleValue result=40 Value=cccccccc 01:41:00 SkyScan query 01:41:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:41:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:00 Parameters OK 01:41:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:00 Set A/D data flow result=40 01:41:00 Set A/D channel type result=40 01:41:00 Set A/D encoding result=40 01:41:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:00 Set channel filter=0.000000e+000 result=40 01:41:00 Config A/D Result=40 01:41:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:00 Get A/D filter: -9.255963e+061 result=40 01:41:00 Get A/D value=-858993460 result=40 01:41:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:00 Parameters OK 01:41:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:00 Set A/D data flow result=40 01:41:00 Set A/D channel type result=40 01:41:00 Set A/D encoding result=40 01:41:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:00 Set channel filter=0.000000e+000 result=40 01:41:00 Config A/D Result=40 01:41:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:00 Get A/D filter: -9.255963e+061 result=40 01:41:00 Get A/D value=-858993460 result=40 01:41:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:41:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:41:00 Aux= 01:41:00 Message to Camera, serial 126638 queued 01:41:37 Received message from Master: op=PointingHead serial=126651 01:41:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:41:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:41:38 Point started: ret=0 01:41:38 point_skyscan result=0 01:41:38 Check angles 01:41:38 SkyScan query 01:41:39 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.39<-17426 Statuses=0009 0009 01:41:39 Msec=0 True Az=109.14 Ze=-81.39 Az status=0009 Ze status=0009 01:41:39 Check angles 01:41:39 SkyScan query 01:41:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.36<-18824 Statuses=0008 0009 01:41:40 Msec=750 True Az=112.995 Ze=-102.36 Az status=0008 Ze status=0009 01:41:40 Check angles 01:41:40 SkyScan query 01:41:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.315<-20221 Statuses=0008 0009 01:41:40 Msec=1500 True Az=112.995 Ze=-123.315 Az status=0008 Ze status=0009 01:41:41 Check angles 01:41:41 SkyScan query 01:41:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.285<-21619 Statuses=0008 0009 01:41:41 Msec=2250 True Az=112.995 Ze=-144.285 Az status=0008 Ze status=0009 01:41:41 Check angles 01:41:41 SkyScan query 01:41:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.21<-23014 Statuses=0008 0009 01:41:42 Msec=3000 True Az=112.995 Ze=-165.21 Az status=0008 Ze status=0009 01:41:42 Check angles 01:41:42 SkyScan query 01:41:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:41:43 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:41:43 Message to Master queued w/err=0: serial=126651 error=0 01:41:48 Received message from Master: op=Filter serial=126652 01:41:48 Color wheel filter change from 0 to 0 01:41:48 FLIGetFilterPos err=0 currentPosition=0 01:41:48 FLIGetStepsRemaining err=0 RemainingSteps=0 01:41:48 Filter is already there-color wheel unchanged 01:41:48 Received message from Master: op=Shutter serial=126653 01:41:48 Shutter LASER open 01:41:48 Received message from Camera: op=State serial=126655 01:41:48 GetSingleValue result=40 Value=cccccccc 01:41:48 SkyScan query 01:41:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:41:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:49 Parameters OK 01:41:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:49 Set A/D data flow result=40 01:41:49 Set A/D channel type result=40 01:41:49 Set A/D encoding result=40 01:41:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:49 Set channel filter=0.000000e+000 result=40 01:41:49 Config A/D Result=40 01:41:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:49 Get A/D filter: -9.255963e+061 result=40 01:41:49 Get A/D value=-858993460 result=40 01:41:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:49 Parameters OK 01:41:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:49 Set A/D data flow result=40 01:41:49 Set A/D channel type result=40 01:41:49 Set A/D encoding result=40 01:41:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:49 Set channel filter=0.000000e+000 result=40 01:41:49 Config A/D Result=40 01:41:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:49 Get A/D filter: -9.255963e+061 result=40 01:41:49 Get A/D value=-858993460 result=40 01:41:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:41:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:41:49 Aux= 01:41:49 Message to Camera, serial 126655 queued 01:41:57 Received message from Master: op=Shutter serial=126665 01:41:57 Shutter LASER close 01:41:57 Received message from Master: op=PointingHead serial=126669 01:41:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:41:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:41:58 Point started: ret=0 01:41:58 point_skyscan result=0 01:41:59 Check angles 01:41:59 SkyScan query 01:41:59 SkyScan query done: ret=0 az=89.85<-5990 ze=157.32<-1512 Statuses=0009 0009 01:41:59 Msec=0 True Az=89.85 Ze=157.32 Az status=0009 Ze status=0009 01:41:59 Check angles 01:41:59 SkyScan query 01:42:00 SkyScan query done: ret=0 az=72.3<-4820 ze=136.32<-2912 Statuses=0009 0009 01:42:00 Msec=750 True Az=72.3 Ze=136.32 Az status=0009 Ze status=0009 01:42:00 Check angles 01:42:00 SkyScan query 01:42:01 SkyScan query done: ret=0 az=54.945<-3663 ze=115.41<-4306 Statuses=0009 0009 01:42:01 Msec=1500 True Az=54.945 Ze=115.41 Az status=0009 Ze status=0009 01:42:01 Check angles 01:42:01 SkyScan query 01:42:01 SkyScan query done: ret=0 az=40.98<-2732 ze=94.41<-5706 Statuses=0009 0009 01:42:01 Msec=2250 True Az=40.98 Ze=94.41 Az status=0009 Ze status=0009 01:42:02 Check angles 01:42:02 SkyScan query 01:42:02 SkyScan query done: ret=0 az=40.995<-2733 ze=73.485<-7101 Statuses=0008 0009 01:42:02 Msec=3000 True Az=40.995 Ze=73.485 Az status=0008 Ze status=0009 01:42:02 Check angles 01:42:02 SkyScan query 01:42:03 SkyScan query done: ret=0 az=40.995<-2733 ze=52.86<-8476 Statuses=0008 0009 01:42:03 Msec=3750 True Az=40.995 Ze=52.86 Az status=0008 Ze status=0009 01:42:03 Check angles 01:42:03 SkyScan query 01:42:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:42:04 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:42:04 Message to Master queued w/err=0: serial=126669 error=0 01:42:09 Received message from Master: op=Filter serial=126670 01:42:09 Color wheel filter change from 0 to 0 01:42:09 FLIGetFilterPos err=0 currentPosition=0 01:42:09 FLIGetStepsRemaining err=0 RemainingSteps=0 01:42:09 Filter is already there-color wheel unchanged 01:42:09 Received message from Master: op=Shutter serial=126671 01:42:09 Shutter LASER close 01:42:09 Received message from Camera: op=State serial=126673 01:42:09 GetSingleValue result=40 Value=cccccccc 01:42:09 SkyScan query 01:42:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:42:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:10 Parameters OK 01:42:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:10 Set A/D data flow result=40 01:42:10 Set A/D channel type result=40 01:42:10 Set A/D encoding result=40 01:42:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:10 Set channel filter=0.000000e+000 result=40 01:42:10 Config A/D Result=40 01:42:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:10 Get A/D filter: -9.255963e+061 result=40 01:42:10 Get A/D value=-858993460 result=40 01:42:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:10 Parameters OK 01:42:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:10 Set A/D data flow result=40 01:42:10 Set A/D channel type result=40 01:42:10 Set A/D encoding result=40 01:42:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:10 Set channel filter=0.000000e+000 result=40 01:42:10 Config A/D Result=40 01:42:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:10 Get A/D filter: -9.255963e+061 result=40 01:42:10 Get A/D value=-858993460 result=40 01:42:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:42:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:42:10 Aux= 01:42:10 Message to Camera, serial 126673 queued 01:42:46 Received message from Master: op=PointingHead serial=126686 01:42:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:42:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:42:47 Point started: ret=0 01:42:47 point_skyscan result=0 01:42:48 Check angles 01:42:48 SkyScan query 01:42:48 SkyScan query done: ret=0 az=40.995<-2733 ze=21.555<-10563 Statuses=0008 0009 01:42:48 Msec=0 True Az=40.995 Ze=21.555 Az status=0008 Ze status=0009 01:42:48 Check angles 01:42:48 SkyScan query 01:42:49 SkyScan query done: ret=0 az=40.995<-2733 ze=0.06<-11996 Statuses=0008 0009 01:42:49 Msec=750 True Az=40.995 Ze=0.06 Az status=0008 Ze status=0009 01:42:49 Check angles 01:42:49 SkyScan query 01:42:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.805<-13387 Statuses=0008 0009 01:42:50 Msec=1500 True Az=40.995 Ze=-20.805 Az status=0008 Ze status=0009 01:42:50 Check angles 01:42:50 SkyScan query 01:42:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 01:42:50 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 01:42:51 Check angles 01:42:51 SkyScan query 01:42:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:42:51 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:42:51 Message to Master queued w/err=0: serial=126686 error=0 01:42:56 Received message from Master: op=Filter serial=126687 01:42:56 Color wheel filter change from 0 to 0 01:42:56 FLIGetFilterPos err=0 currentPosition=0 01:42:56 FLIGetStepsRemaining err=0 RemainingSteps=0 01:42:56 Filter is already there-color wheel unchanged 01:42:56 Received message from Master: op=Shutter serial=126688 01:42:56 Shutter LASER close 01:42:56 Received message from Camera: op=State serial=126690 01:42:56 GetSingleValue result=40 Value=cccccccc 01:42:56 SkyScan query 01:42:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:42:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:57 Parameters OK 01:42:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:57 Set A/D data flow result=40 01:42:57 Set A/D channel type result=40 01:42:57 Set A/D encoding result=40 01:42:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:57 Set channel filter=0.000000e+000 result=40 01:42:57 Config A/D Result=40 01:42:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:57 Get A/D filter: -9.255963e+061 result=40 01:42:57 Get A/D value=-858993460 result=40 01:42:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:57 Parameters OK 01:42:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:57 Set A/D data flow result=40 01:42:57 Set A/D channel type result=40 01:42:57 Set A/D encoding result=40 01:42:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:57 Set channel filter=0.000000e+000 result=40 01:42:57 Config A/D Result=40 01:42:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:57 Get A/D filter: -9.255963e+061 result=40 01:42:57 Get A/D value=-858993460 result=40 01:42:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:42:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:42:57 Aux= 01:42:57 Message to Camera, serial 126690 queued 01:43:33 Received message from Master: op=PointingHead serial=126702 01:43:33 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:43:33 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:43:33 Point started: ret=0 01:43:33 point_skyscan result=0 01:43:34 Check angles 01:43:34 SkyScan query 01:43:35 SkyScan query done: ret=0 az=64.485<-4299 ze=-68.865<-16591 Statuses=0009 0009 01:43:35 Msec=0 True Az=64.485 Ze=-68.865 Az status=0009 Ze status=0009 01:43:35 Check angles 01:43:35 SkyScan query 01:43:35 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.82<-17988 Statuses=0009 0009 01:43:35 Msec=750 True Az=81.885 Ze=-89.82 Az status=0009 Ze status=0009 01:43:35 Check angles 01:43:35 SkyScan query 01:43:36 SkyScan query done: ret=0 az=99.855<-6657 ze=-111.18<-19412 Statuses=0009 0009 01:43:36 Msec=1500 True Az=99.855 Ze=-111.18 Az status=0009 Ze status=0009 01:43:36 Check angles 01:43:36 SkyScan query 01:43:37 SkyScan query done: ret=0 az=117.375<-7825 ze=-132.135<-20809 Statuses=0009 0009 01:43:37 Msec=2250 True Az=117.375 Ze=-132.135 Az status=0009 Ze status=0009 01:43:37 Check angles 01:43:37 SkyScan query 01:43:38 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 01:43:38 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 01:43:38 Check angles 01:43:38 SkyScan query 01:43:38 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:43:38 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:43:38 Message to Master queued w/err=0: serial=126702 error=0 01:43:43 Received message from Master: op=Filter serial=126703 01:43:43 Color wheel filter change from 0 to 0 01:43:43 FLIGetFilterPos err=0 currentPosition=0 01:43:43 FLIGetStepsRemaining err=0 RemainingSteps=0 01:43:43 Filter is already there-color wheel unchanged 01:43:43 Received message from Master: op=Shutter serial=126704 01:43:43 Shutter LASER close 01:43:44 Received message from Camera: op=State serial=126706 01:43:44 GetSingleValue result=40 Value=cccccccc 01:43:44 SkyScan query 01:43:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:43:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:43:44 Parameters OK 01:43:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:43:44 Set A/D data flow result=40 01:43:44 Set A/D channel type result=40 01:43:44 Set A/D encoding result=40 01:43:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:43:44 Set channel filter=0.000000e+000 result=40 01:43:44 Config A/D Result=40 01:43:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:43:44 Get A/D filter: -9.255963e+061 result=40 01:43:44 Get A/D value=-858993460 result=40 01:43:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:43:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:43:44 Parameters OK 01:43:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:43:44 Set A/D data flow result=40 01:43:44 Set A/D channel type result=40 01:43:44 Set A/D encoding result=40 01:43:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:43:44 Set channel filter=0.000000e+000 result=40 01:43:44 Config A/D Result=40 01:43:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:43:44 Get A/D filter: -9.255963e+061 result=40 01:43:44 Get A/D value=-858993460 result=40 01:43:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:43:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:43:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:43:44 Aux= 01:43:44 Message to Camera, serial 126706 queued 01:44:21 Received message from Master: op=PointingHead serial=126719 01:44:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:44:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:44:21 Point started: ret=0 01:44:21 point_skyscan result=0 01:44:22 Check angles 01:44:22 SkyScan query 01:44:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 01:44:23 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 01:44:23 Check angles 01:44:23 SkyScan query 01:44:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:44:23 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:44:23 Message to Master queued w/err=0: serial=126719 error=0 01:44:28 Received message from Master: op=Filter serial=126720 01:44:28 Color wheel filter change from 0 to 0 01:44:28 FLIGetFilterPos err=0 currentPosition=0 01:44:28 FLIGetStepsRemaining err=0 RemainingSteps=0 01:44:28 Filter is already there-color wheel unchanged 01:44:29 Received message from Master: op=Shutter serial=126721 01:44:29 Shutter LASER open 01:44:29 Received message from Camera: op=State serial=126723 01:44:29 GetSingleValue result=40 Value=cccccccc 01:44:29 SkyScan query 01:44:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:44:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:29 Parameters OK 01:44:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:29 Set A/D data flow result=40 01:44:29 Set A/D channel type result=40 01:44:29 Set A/D encoding result=40 01:44:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:29 Set channel filter=0.000000e+000 result=40 01:44:29 Config A/D Result=40 01:44:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:29 Get A/D filter: -9.255963e+061 result=40 01:44:29 Get A/D value=-858993460 result=40 01:44:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:29 Parameters OK 01:44:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:29 Set A/D data flow result=40 01:44:29 Set A/D channel type result=40 01:44:29 Set A/D encoding result=40 01:44:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:29 Set channel filter=0.000000e+000 result=40 01:44:29 Config A/D Result=40 01:44:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:29 Get A/D filter: -9.255963e+061 result=40 01:44:29 Get A/D value=-858993460 result=40 01:44:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:44:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:44:29 Aux= 01:44:29 Message to Camera, serial 126723 queued 01:44:38 Received message from Master: op=Shutter serial=126733 01:44:38 Shutter LASER close 01:44:38 Received message from Master: op=PointingHead serial=126737 01:44:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:44:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:44:39 Point started: ret=0 01:44:39 point_skyscan result=0 01:44:39 Check angles 01:44:39 SkyScan query 01:44:40 SkyScan query done: ret=0 az=136.56<-9104 ze=-142.74<-21516 Statuses=0009 0009 01:44:40 Msec=0 True Az=136.56 Ze=-142.74 Az status=0009 Ze status=0009 01:44:40 Check angles 01:44:40 SkyScan query 01:44:41 SkyScan query done: ret=0 az=154.005<-10267 ze=-121.77<-20118 Statuses=0009 0009 01:44:41 Msec=750 True Az=154.005 Ze=-121.77 Az status=0009 Ze status=0009 01:44:41 Check angles 01:44:41 SkyScan query 01:44:42 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.8<-18720 Statuses=0009 0009 01:44:42 Msec=1500 True Az=171.465 Ze=-100.8 Az status=0009 Ze status=0009 01:44:42 Check angles 01:44:42 SkyScan query 01:44:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.92<-17328 Statuses=0008 0009 01:44:42 Msec=2250 True Az=176.01 Ze=-79.92 Az status=0008 Ze status=0009 01:44:42 Check angles 01:44:42 SkyScan query 01:44:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.92<-15928 Statuses=0008 0009 01:44:43 Msec=3000 True Az=176.01 Ze=-58.92 Az status=0008 Ze status=0009 01:44:43 Check angles 01:44:43 SkyScan query 01:44:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:44:44 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:44:44 Message to Master queued w/err=0: serial=126737 error=0 01:44:49 Received message from Master: op=Filter serial=126738 01:44:49 Color wheel filter change from 0 to 0 01:44:49 FLIGetFilterPos err=0 currentPosition=0 01:44:49 FLIGetStepsRemaining err=0 RemainingSteps=0 01:44:49 Filter is already there-color wheel unchanged 01:44:49 Received message from Master: op=Shutter serial=126739 01:44:49 Shutter LASER close 01:44:49 Received message from Camera: op=State serial=126741 01:44:49 GetSingleValue result=40 Value=cccccccc 01:44:49 SkyScan query 01:44:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:44:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:50 Parameters OK 01:44:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:50 Set A/D data flow result=40 01:44:50 Set A/D channel type result=40 01:44:50 Set A/D encoding result=40 01:44:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:50 Set channel filter=0.000000e+000 result=40 01:44:50 Config A/D Result=40 01:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:50 Get A/D filter: -9.255963e+061 result=40 01:44:50 Get A/D value=-858993460 result=40 01:44:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:50 Parameters OK 01:44:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:50 Set A/D data flow result=40 01:44:50 Set A/D channel type result=40 01:44:50 Set A/D encoding result=40 01:44:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:50 Set channel filter=0.000000e+000 result=40 01:44:50 Config A/D Result=40 01:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:50 Get A/D filter: -9.255963e+061 result=40 01:44:50 Get A/D value=-858993460 result=40 01:44:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:44:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:44:50 Aux= 01:44:50 Message to Camera, serial 126741 queued 01:45:26 Received message from Master: op=PointingHead serial=126754 01:45:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:45:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:45:27 Point started: ret=0 01:45:27 point_skyscan result=0 01:45:27 Received message from Master: op=Identify serial=126755 01:45:28 Check angles 01:45:28 SkyScan query 01:45:28 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.72<-13448 Statuses=0009 0009 01:45:28 Msec=0 True Az=152.76 Ze=-21.72 Az status=0009 Ze status=0009 01:45:28 Check angles 01:45:28 SkyScan query 01:45:29 SkyScan query done: ret=0 az=134.925<-8995 ze=-0.195<-12013 Statuses=0009 0009 01:45:29 Msec=750 True Az=134.925 Ze=-0.195 Az status=0009 Ze status=0009 01:45:29 Check angles 01:45:29 SkyScan query 01:45:30 SkyScan query done: ret=0 az=117.495<-7833 ze=20.685<-10621 Statuses=0009 0009 01:45:30 Msec=1500 True Az=117.495 Ze=20.685 Az status=0009 Ze status=0009 01:45:30 Check angles 01:45:30 SkyScan query 01:45:30 SkyScan query done: ret=0 az=100.05<-6670 ze=41.655<-9223 Statuses=0009 0009 01:45:30 Msec=2250 True Az=100.05 Ze=41.655 Az status=0009 Ze status=0009 01:45:31 Check angles 01:45:31 SkyScan query 01:45:31 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 01:45:31 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 01:45:31 Check angles 01:45:31 SkyScan query 01:45:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:45:32 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:45:32 Message to Master queued w/err=0: serial=126754 error=0 01:45:37 Received message from Master: op=Filter serial=126758 01:45:37 Color wheel filter change from 0 to 0 01:45:37 FLIGetFilterPos err=0 currentPosition=0 01:45:37 FLIGetStepsRemaining err=0 RemainingSteps=0 01:45:37 Filter is already there-color wheel unchanged 01:45:37 Received message from Master: op=Shutter serial=126759 01:45:37 Shutter LASER close 01:45:37 Received message from Camera: op=State serial=126761 01:45:37 GetSingleValue result=40 Value=cccccccc 01:45:37 SkyScan query 01:45:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:45:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:45:38 Parameters OK 01:45:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:45:38 Set A/D data flow result=40 01:45:38 Set A/D channel type result=40 01:45:38 Set A/D encoding result=40 01:45:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:45:38 Set channel filter=0.000000e+000 result=40 01:45:38 Config A/D Result=40 01:45:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:45:38 Get A/D filter: -9.255963e+061 result=40 01:45:38 Get A/D value=-858993460 result=40 01:45:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:45:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:45:38 Parameters OK 01:45:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:45:38 Set A/D data flow result=40 01:45:38 Set A/D channel type result=40 01:45:38 Set A/D encoding result=40 01:45:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:45:38 Set channel filter=0.000000e+000 result=40 01:45:38 Config A/D Result=40 01:45:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2018-12-14 01:45:38] 01:45:38 Get A/D filter: -9.255963e+061 result=40 01:45:38 Get A/D value=-858993460 result=40 01:45:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:45:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:45:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:45:38 Aux= 01:45:38 Message to Camera, serial 126761 queued 01:46:14 Received message from Master: op=PointingHead serial=126773 01:46:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:46:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:46:14 Point started: ret=0 01:46:14 point_skyscan result=0 01:46:15 Check angles 01:46:15 SkyScan query 01:46:16 SkyScan query done: ret=0 az=85.995<-5733 ze=21.39<-10574 Statuses=0008 0009 01:46:16 Msec=0 True Az=85.995 Ze=21.39 Az status=0008 Ze status=0009 01:46:16 Check angles 01:46:16 SkyScan query 01:46:16 SkyScan query done: ret=0 az=85.995<-5733 ze=0.42<-11972 Statuses=0008 0009 01:46:16 Msec=750 True Az=85.995 Ze=0.42 Az status=0008 Ze status=0009 01:46:16 Check angles 01:46:16 SkyScan query 01:46:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.955<-13397 Statuses=0008 0009 01:46:17 Msec=1500 True Az=85.995 Ze=-20.955 Az status=0008 Ze status=0009 01:46:17 Check angles 01:46:17 SkyScan query 01:46:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.925<-14795 Statuses=0008 0009 01:46:18 Msec=2250 True Az=85.995 Ze=-41.925 Az status=0008 Ze status=0009 01:46:18 Check angles 01:46:18 SkyScan query 01:46:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 01:46:19 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 01:46:19 Message to Master queued w/err=0: serial=126773 error=0 01:46:24 Received message from Master: op=Filter serial=126774 01:46:24 Color wheel filter change from 0 to 0 01:46:24 FLIGetFilterPos err=0 currentPosition=0 01:46:24 FLIGetStepsRemaining err=0 RemainingSteps=0 01:46:24 Filter is already there-color wheel unchanged 01:46:24 Received message from Master: op=Shutter serial=126775 01:46:24 Shutter LASER close 01:46:24 Received message from Camera: op=State serial=126777 01:46:24 GetSingleValue result=40 Value=cccccccc 01:46:24 SkyScan query 01:46:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:46:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:24 Parameters OK 01:46:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:24 Set A/D data flow result=40 01:46:24 Set A/D channel type result=40 01:46:24 Set A/D encoding result=40 01:46:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:24 Set channel filter=0.000000e+000 result=40 01:46:24 Config A/D Result=40 01:46:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:24 Get A/D filter: -9.255963e+061 result=40 01:46:24 Get A/D value=-858993460 result=40 01:46:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:24 Parameters OK 01:46:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:24 Set A/D data flow result=40 01:46:24 Set A/D channel type result=40 01:46:24 Set A/D encoding result=40 01:46:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:24 Set channel filter=0.000000e+000 result=40 01:46:24 Config A/D Result=40 01:46:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:24 Get A/D filter: -9.255963e+061 result=40 01:46:24 Get A/D value=-858993460 result=40 01:46:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:46:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:46:24 Aux= 01:46:24 Message to Camera, serial 126777 queued 01:47:01 Received message from Master: op=PointingHead serial=126790 01:47:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:47:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:47:02 Point started: ret=0 01:47:02 point_skyscan result=0 01:47:02 Check angles 01:47:02 SkyScan query 01:47:03 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.105<-17407 Statuses=0009 0009 01:47:03 Msec=0 True Az=108.825 Ze=-81.105 Az status=0009 Ze status=0009 01:47:03 Check angles 01:47:03 SkyScan query 01:47:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 01:47:04 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 01:47:04 Check angles 01:47:04 SkyScan query 01:47:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 01:47:04 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 01:47:05 Check angles 01:47:05 SkyScan query 01:47:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 01:47:05 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 01:47:05 Check angles 01:47:05 SkyScan query 01:47:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.375<-23025 Statuses=0008 0009 01:47:06 Msec=3000 True Az=112.995 Ze=-165.375 Az status=0008 Ze status=0009 01:47:06 Check angles 01:47:06 SkyScan query 01:47:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:47:07 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:47:07 Message to Master queued w/err=0: serial=126790 error=0 01:47:12 Received message from Master: op=Filter serial=126791 01:47:12 Color wheel filter change from 0 to 0 01:47:12 FLIGetFilterPos err=0 currentPosition=0 01:47:12 FLIGetStepsRemaining err=0 RemainingSteps=0 01:47:12 Filter is already there-color wheel unchanged 01:47:12 Received message from Master: op=Shutter serial=126792 01:47:12 Shutter LASER open 01:47:12 Received message from Camera: op=State serial=126794 01:47:12 GetSingleValue result=40 Value=cccccccc 01:47:12 SkyScan query 01:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:47:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:13 Parameters OK 01:47:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:13 Set A/D data flow result=40 01:47:13 Set A/D channel type result=40 01:47:13 Set A/D encoding result=40 01:47:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:13 Set channel filter=0.000000e+000 result=40 01:47:13 Config A/D Result=40 01:47:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:13 Get A/D filter: -9.255963e+061 result=40 01:47:13 Get A/D value=-858993460 result=40 01:47:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:13 Parameters OK 01:47:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:13 Set A/D data flow result=40 01:47:13 Set A/D channel type result=40 01:47:13 Set A/D encoding result=40 01:47:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:13 Set channel filter=0.000000e+000 result=40 01:47:13 Config A/D Result=40 01:47:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:13 Get A/D filter: -9.255963e+061 result=40 01:47:13 Get A/D value=-858993460 result=40 01:47:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:47:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:47:13 Aux= 01:47:13 Message to Camera, serial 126794 queued 01:47:21 Received message from Master: op=Shutter serial=126804 01:47:21 Shutter LASER close 01:47:21 Received message from Master: op=PointingHead serial=126808 01:47:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:47:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:47:22 Point started: ret=0 01:47:22 point_skyscan result=0 01:47:23 Check angles 01:47:23 SkyScan query 01:47:23 SkyScan query done: ret=0 az=89.625<-5975 ze=157.02<-1532 Statuses=0009 0009 01:47:23 Msec=0 True Az=89.625 Ze=157.02 Az status=0009 Ze status=0009 01:47:23 Check angles 01:47:23 SkyScan query 01:47:24 SkyScan query done: ret=0 az=72.225<-4815 ze=136.065<-2929 Statuses=0009 0009 01:47:24 Msec=750 True Az=72.225 Ze=136.065 Az status=0009 Ze status=0009 01:47:24 Check angles 01:47:24 SkyScan query 01:47:25 SkyScan query done: ret=0 az=54.9<-3660 ze=115.14<-4324 Statuses=0009 0009 01:47:25 Msec=1500 True Az=54.9 Ze=115.14 Az status=0009 Ze status=0009 01:47:25 Check angles 01:47:25 SkyScan query 01:47:25 SkyScan query done: ret=0 az=40.98<-2732 ze=94.17<-5722 Statuses=0009 0009 01:47:25 Msec=2250 True Az=40.98 Ze=94.17 Az status=0009 Ze status=0009 01:47:26 Check angles 01:47:26 SkyScan query 01:47:26 SkyScan query done: ret=0 az=40.995<-2733 ze=73.2<-7120 Statuses=0008 0009 01:47:26 Msec=3000 True Az=40.995 Ze=73.2 Az status=0008 Ze status=0009 01:47:26 Check angles 01:47:26 SkyScan query 01:47:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 01:47:27 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 01:47:27 Check angles 01:47:27 SkyScan query 01:47:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:47:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:47:28 Message to Master queued w/err=0: serial=126808 error=0 01:47:33 Received message from Master: op=Filter serial=126809 01:47:33 Color wheel filter change from 0 to 0 01:47:33 FLIGetFilterPos err=0 currentPosition=0 01:47:33 FLIGetStepsRemaining err=0 RemainingSteps=0 01:47:33 Filter is already there-color wheel unchanged 01:47:33 Received message from Master: op=Shutter serial=126810 01:47:33 Shutter LASER close 01:47:33 Received message from Camera: op=State serial=126812 01:47:33 GetSingleValue result=40 Value=cccccccc 01:47:33 SkyScan query 01:47:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:47:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:34 Parameters OK 01:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:34 Set A/D data flow result=40 01:47:34 Set A/D channel type result=40 01:47:34 Set A/D encoding result=40 01:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:34 Set channel filter=0.000000e+000 result=40 01:47:34 Config A/D Result=40 01:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:34 Get A/D filter: -9.255963e+061 result=40 01:47:34 Get A/D value=-858993460 result=40 01:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:34 Parameters OK 01:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:34 Set A/D data flow result=40 01:47:34 Set A/D channel type result=40 01:47:34 Set A/D encoding result=40 01:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:34 Set channel filter=0.000000e+000 result=40 01:47:34 Config A/D Result=40 01:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:34 Get A/D filter: -9.255963e+061 result=40 01:47:34 Get A/D value=-858993460 result=40 01:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:47:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:47:34 Aux= 01:47:34 Message to Camera, serial 126812 queued 01:48:10 Received message from Master: op=PointingHead serial=126825 01:48:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:48:10 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:48:11 Point started: ret=0 01:48:11 point_skyscan result=0 01:48:12 Check angles 01:48:12 SkyScan query 01:48:12 SkyScan query done: ret=0 az=40.995<-2733 ze=21.72<-10552 Statuses=0008 0009 01:48:12 Msec=0 True Az=40.995 Ze=21.72 Az status=0008 Ze status=0009 01:48:12 Check angles 01:48:12 SkyScan query 01:48:13 SkyScan query done: ret=0 az=40.995<-2733 ze=0.24<-11984 Statuses=0008 0009 01:48:13 Msec=750 True Az=40.995 Ze=0.24 Az status=0008 Ze status=0009 01:48:13 Check angles 01:48:13 SkyScan query 01:48:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.595<-13373 Statuses=0008 0009 01:48:14 Msec=1500 True Az=40.995 Ze=-20.595 Az status=0008 Ze status=0009 01:48:14 Check angles 01:48:14 SkyScan query 01:48:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 01:48:14 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 01:48:15 Check angles 01:48:15 SkyScan query 01:48:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:48:15 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:48:15 Message to Master queued w/err=0: serial=126825 error=0 01:48:20 Received message from Master: op=Filter serial=126826 01:48:20 Color wheel filter change from 0 to 0 01:48:20 FLIGetFilterPos err=0 currentPosition=0 01:48:20 FLIGetStepsRemaining err=0 RemainingSteps=0 01:48:20 Filter is already there-color wheel unchanged 01:48:20 Received message from Master: op=Shutter serial=126827 01:48:20 Shutter LASER close 01:48:20 Received message from Camera: op=State serial=126829 01:48:20 GetSingleValue result=40 Value=cccccccc 01:48:20 SkyScan query 01:48:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:48:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:48:21 Parameters OK 01:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:48:21 Set A/D data flow result=40 01:48:21 Set A/D channel type result=40 01:48:21 Set A/D encoding result=40 01:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:48:21 Set channel filter=0.000000e+000 result=40 01:48:21 Config A/D Result=40 01:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:48:21 Get A/D filter: -9.255963e+061 result=40 01:48:21 Get A/D value=-858993460 result=40 01:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:48:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:48:21 Parameters OK 01:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:48:21 Set A/D data flow result=40 01:48:21 Set A/D channel type result=40 01:48:21 Set A/D encoding result=40 01:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:48:21 Set channel filter=0.000000e+000 result=40 01:48:21 Config A/D Result=40 01:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:48:21 Get A/D filter: -9.255963e+061 result=40 01:48:21 Get A/D value=-858993460 result=40 01:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:48:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:48:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:48:21 Aux= 01:48:21 Message to Camera, serial 126829 queued 01:48:58 Received message from Master: op=PointingHead serial=126842 01:48:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:48:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:48:58 Point started: ret=0 01:48:58 point_skyscan result=0 01:48:59 Check angles 01:48:59 SkyScan query 01:49:00 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.25<-16550 Statuses=0009 0009 01:49:00 Msec=0 True Az=63.945 Ze=-68.25 Az status=0009 Ze status=0009 01:49:00 Check angles 01:49:00 SkyScan query 01:49:00 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.235<-17949 Statuses=0009 0009 01:49:00 Msec=750 True Az=81.345 Ze=-89.235 Az status=0009 Ze status=0009 01:49:00 Check angles 01:49:00 SkyScan query 01:49:01 SkyScan query done: ret=0 az=98.85<-6590 ze=-110.175<-19345 Statuses=0009 0009 01:49:01 Msec=1500 True Az=98.85 Ze=-110.175 Az status=0009 Ze status=0009 01:49:01 Check angles 01:49:01 SkyScan query 01:49:02 SkyScan query done: ret=0 az=116.46<-7764 ze=-131.13<-20742 Statuses=0009 0009 01:49:02 Msec=2250 True Az=116.46 Ze=-131.13 Az status=0009 Ze status=0009 01:49:02 Check angles 01:49:02 SkyScan query 01:49:03 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 01:49:03 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 01:49:03 Check angles 01:49:03 SkyScan query 01:49:03 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:49:03 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:49:03 Message to Master queued w/err=0: serial=126842 error=0 01:49:08 Received message from Master: op=Filter serial=126843 01:49:08 Color wheel filter change from 0 to 0 01:49:08 FLIGetFilterPos err=0 currentPosition=0 01:49:08 FLIGetStepsRemaining err=0 RemainingSteps=0 01:49:08 Filter is already there-color wheel unchanged 01:49:08 Received message from Master: op=Shutter serial=126844 01:49:08 Shutter LASER close 01:49:08 Received message from Camera: op=State serial=126846 01:49:08 GetSingleValue result=40 Value=cccccccc 01:49:08 SkyScan query 01:49:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:49:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:09 Parameters OK 01:49:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:09 Set A/D data flow result=40 01:49:09 Set A/D channel type result=40 01:49:09 Set A/D encoding result=40 01:49:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:09 Set channel filter=0.000000e+000 result=40 01:49:09 Config A/D Result=40 01:49:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:09 Get A/D filter: -9.255963e+061 result=40 01:49:09 Get A/D value=-858993460 result=40 01:49:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:09 Parameters OK 01:49:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:09 Set A/D data flow result=40 01:49:09 Set A/D channel type result=40 01:49:09 Set A/D encoding result=40 01:49:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:09 Set channel filter=0.000000e+000 result=40 01:49:09 Config A/D Result=40 01:49:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:09 Get A/D filter: -9.255963e+061 result=40 01:49:09 Get A/D value=-858993460 result=40 01:49:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:09 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:49:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:49:09 Aux= 01:49:09 Message to Camera, serial 126846 queued 01:49:46 Received message from Master: op=PointingHead serial=126859 01:49:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:49:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:49:46 Point started: ret=0 01:49:46 point_skyscan result=0 01:49:47 Check angles 01:49:47 SkyScan query 01:49:48 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 01:49:48 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 01:49:48 Check angles 01:49:48 SkyScan query 01:49:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:49:48 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:49:48 Message to Master queued w/err=0: serial=126859 error=0 01:49:53 Received message from Master: op=Filter serial=126860 01:49:53 Color wheel filter change from 0 to 0 01:49:53 FLIGetFilterPos err=0 currentPosition=0 01:49:53 FLIGetStepsRemaining err=0 RemainingSteps=0 01:49:53 Filter is already there-color wheel unchanged 01:49:53 Received message from Master: op=Shutter serial=126861 01:49:53 Shutter LASER open 01:49:54 Received message from Camera: op=State serial=126863 01:49:54 GetSingleValue result=40 Value=cccccccc 01:49:54 SkyScan query 01:49:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:49:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:54 Parameters OK 01:49:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:54 Set A/D data flow result=40 01:49:54 Set A/D channel type result=40 01:49:54 Set A/D encoding result=40 01:49:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:54 Set channel filter=0.000000e+000 result=40 01:49:54 Config A/D Result=40 01:49:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:54 Get A/D filter: -9.255963e+061 result=40 01:49:54 Get A/D value=-858993460 result=40 01:49:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:54 Parameters OK 01:49:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:54 Set A/D data flow result=40 01:49:54 Set A/D channel type result=40 01:49:54 Set A/D encoding result=40 01:49:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:54 Set channel filter=0.000000e+000 result=40 01:49:54 Config A/D Result=40 01:49:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:54 Get A/D filter: -9.255963e+061 result=40 01:49:54 Get A/D value=-858993460 result=40 01:49:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:49:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:49:54 Aux= 01:49:54 Message to Camera, serial 126863 queued 01:50:03 Received message from Master: op=Shutter serial=126873 01:50:03 Shutter LASER close 01:50:03 Received message from Master: op=PointingHead serial=126877 01:50:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:50:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:50:04 Point started: ret=0 01:50:04 point_skyscan result=0 01:50:04 Check angles 01:50:04 SkyScan query 01:50:05 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.55<-21570 Statuses=0009 0009 01:50:05 Msec=0 True Az=135.705 Ze=-143.55 Az status=0009 Ze status=0009 01:50:05 Check angles 01:50:05 SkyScan query 01:50:06 SkyScan query done: ret=0 az=153.18<-10212 ze=-122.595<-20173 Statuses=0009 0009 01:50:06 Msec=750 True Az=153.18 Ze=-122.595 Az status=0009 Ze status=0009 01:50:06 Check angles 01:50:06 SkyScan query 01:50:06 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.67<-18778 Statuses=0009 0009 01:50:06 Msec=1500 True Az=170.775 Ze=-101.67 Az status=0009 Ze status=0009 01:50:07 Check angles 01:50:07 SkyScan query 01:50:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.64<-17376 Statuses=0008 0009 01:50:07 Msec=2250 True Az=176.01 Ze=-80.64 Az status=0008 Ze status=0009 01:50:07 Check angles 01:50:07 SkyScan query 01:50:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.7<-15980 Statuses=0008 0009 01:50:08 Msec=3000 True Az=176.01 Ze=-59.7 Az status=0008 Ze status=0009 01:50:08 Check angles 01:50:08 SkyScan query 01:50:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:50:09 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:50:09 Message to Master queued w/err=0: serial=126877 error=0 01:50:14 Received message from Master: op=Filter serial=126878 01:50:14 Color wheel filter change from 0 to 0 01:50:14 FLIGetFilterPos err=0 currentPosition=0 01:50:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:50:14 Filter is already there-color wheel unchanged 01:50:14 Received message from Master: op=Shutter serial=126879 01:50:14 Shutter LASER close 01:50:14 Received message from Camera: op=State serial=126881 01:50:14 GetSingleValue result=40 Value=cccccccc 01:50:14 SkyScan query 01:50:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:50:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:15 Parameters OK 01:50:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:15 Set A/D data flow result=40 01:50:15 Set A/D channel type result=40 01:50:15 Set A/D encoding result=40 01:50:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:15 Set channel filter=0.000000e+000 result=40 01:50:15 Config A/D Result=40 01:50:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:15 Get A/D filter: -9.255963e+061 result=40 01:50:15 Get A/D value=-858993460 result=40 01:50:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:15 Parameters OK 01:50:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:15 Set A/D data flow result=40 01:50:15 Set A/D channel type result=40 01:50:15 Set A/D encoding result=40 01:50:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:15 Set channel filter=0.000000e+000 result=40 01:50:15 Config A/D Result=40 01:50:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:15 Get A/D filter: -9.255963e+061 result=40 01:50:15 Get A/D value=-858993460 result=40 01:50:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:50:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:50:15 Aux= 01:50:15 Message to Camera, serial 126881 queued 01:50:51 Received message from Master: op=PointingHead serial=126894 01:50:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:50:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:50:52 Point started: ret=0 01:50:52 point_skyscan result=0 01:50:53 Check angles 01:50:53 SkyScan query 01:50:53 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.645<-13443 Statuses=0009 0009 01:50:53 Msec=0 True Az=152.955 Ze=-21.645 Az status=0009 Ze status=0009 01:50:53 Check angles 01:50:53 SkyScan query 01:50:54 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.615<-12041 Statuses=0009 0009 01:50:54 Msec=750 True Az=135.39 Ze=-0.615 Az status=0009 Ze status=0009 01:50:54 Check angles 01:50:54 SkyScan query 01:50:55 SkyScan query done: ret=0 az=117.96<-7864 ze=20.31<-10646 Statuses=0009 0009 01:50:55 Msec=1500 True Az=117.96 Ze=20.31 Az status=0009 Ze status=0009 01:50:55 Check angles 01:50:55 SkyScan query 01:50:55 SkyScan query done: ret=0 az=100.59<-6706 ze=41.295<-9247 Statuses=0009 0009 01:50:55 Msec=2250 True Az=100.59 Ze=41.295 Az status=0009 Ze status=0009 01:50:56 Check angles 01:50:56 SkyScan query 01:50:56 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 01:50:56 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 01:50:56 Check angles 01:50:56 SkyScan query 01:50:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:50:57 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:50:57 Message to Master queued w/err=0: serial=126894 error=0 01:51:02 Received message from Master: op=Filter serial=126895 01:51:02 Color wheel filter change from 0 to 0 01:51:02 FLIGetFilterPos err=0 currentPosition=0 01:51:02 FLIGetStepsRemaining err=0 RemainingSteps=0 01:51:02 Filter is already there-color wheel unchanged 01:51:02 Received message from Master: op=Shutter serial=126896 01:51:02 Shutter LASER close 01:51:02 Received message from Camera: op=State serial=126898 01:51:02 GetSingleValue result=40 Value=cccccccc 01:51:02 SkyScan query 01:51:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:51:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:03 Parameters OK 01:51:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:03 Set A/D data flow result=40 01:51:03 Set A/D channel type result=40 01:51:03 Set A/D encoding result=40 01:51:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:03 Set channel filter=0.000000e+000 result=40 01:51:03 Config A/D Result=40 01:51:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:03 Get A/D filter: -9.255963e+061 result=40 01:51:03 Get A/D value=-858993460 result=40 01:51:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:03 Parameters OK 01:51:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:03 Set A/D data flow result=40 01:51:03 Set A/D channel type result=40 01:51:03 Set A/D encoding result=40 01:51:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:03 Set channel filter=0.000000e+000 result=40 01:51:03 Config A/D Result=40 01:51:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:03 Get A/D filter: -9.255963e+061 result=40 01:51:03 Get A/D value=-858993460 result=40 01:51:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:51:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:51:03 Aux= 01:51:03 Message to Camera, serial 126898 queued 01:51:40 Received message from Master: op=PointingHead serial=126911 01:51:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:51:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:51:40 Point started: ret=0 01:51:40 point_skyscan result=0 01:51:41 Check angles 01:51:41 SkyScan query 01:51:41 SkyScan query done: ret=0 az=85.995<-5733 ze=21.66<-10556 Statuses=0008 0009 01:51:41 Msec=0 True Az=85.995 Ze=21.66 Az status=0008 Ze status=0009 01:51:41 Check angles 01:51:41 SkyScan query 01:51:42 SkyScan query done: ret=0 az=85.995<-5733 ze=0.285<-11981 Statuses=0008 0009 01:51:42 Msec=750 True Az=85.995 Ze=0.285 Az status=0008 Ze status=0009 01:51:42 Check angles 01:51:42 SkyScan query 01:51:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.64<-13376 Statuses=0008 0009 01:51:43 Msec=1500 True Az=85.995 Ze=-20.64 Az status=0008 Ze status=0009 01:51:43 Check angles 01:51:43 SkyScan query 01:51:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.595<-14773 Statuses=0008 0009 01:51:44 Msec=2250 True Az=85.995 Ze=-41.595 Az status=0008 Ze status=0009 01:51:44 Check angles 01:51:44 SkyScan query 01:51:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 01:51:44 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 01:51:44 Message to Master queued w/err=0: serial=126911 error=0 01:51:49 Received message from Master: op=Filter serial=126912 01:51:49 Color wheel filter change from 0 to 0 01:51:49 FLIGetFilterPos err=0 currentPosition=0 01:51:49 FLIGetStepsRemaining err=0 RemainingSteps=0 01:51:49 Filter is already there-color wheel unchanged 01:51:49 Received message from Master: op=Shutter serial=126913 01:51:49 Shutter LASER close 01:51:50 Received message from Camera: op=State serial=126915 01:51:50 GetSingleValue result=40 Value=cccccccc 01:51:50 SkyScan query 01:51:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:51:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:50 Parameters OK 01:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:50 Set A/D data flow result=40 01:51:50 Set A/D channel type result=40 01:51:50 Set A/D encoding result=40 01:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:50 Set channel filter=0.000000e+000 result=40 01:51:50 Config A/D Result=40 01:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:50 Get A/D filter: -9.255963e+061 result=40 01:51:50 Get A/D value=-858993460 result=40 01:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:50 Parameters OK 01:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:50 Set A/D data flow result=40 01:51:50 Set A/D channel type result=40 01:51:50 Set A/D encoding result=40 01:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:50 Set channel filter=0.000000e+000 result=40 01:51:50 Config A/D Result=40 01:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:50 Get A/D filter: -9.255963e+061 result=40 01:51:50 Get A/D value=-858993460 result=40 01:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:51:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:51:50 Aux= 01:51:50 Message to Camera, serial 126915 queued 01:52:27 Received message from Master: op=PointingHead serial=126928 01:52:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:52:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:52:27 Point started: ret=0 01:52:27 point_skyscan result=0 01:52:28 Check angles 01:52:28 SkyScan query 01:52:29 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.09<-17406 Statuses=0009 0009 01:52:29 Msec=0 True Az=108.825 Ze=-81.09 Az status=0009 Ze status=0009 01:52:29 Check angles 01:52:29 SkyScan query 01:52:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 01:52:29 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 01:52:30 Check angles 01:52:30 SkyScan query 01:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.985<-20199 Statuses=0008 0009 01:52:30 Msec=1500 True Az=112.995 Ze=-122.985 Az status=0008 Ze status=0009 01:52:30 Check angles 01:52:30 SkyScan query 01:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.955<-21597 Statuses=0008 0009 01:52:31 Msec=2250 True Az=112.995 Ze=-143.955 Az status=0008 Ze status=0009 01:52:31 Check angles 01:52:31 SkyScan query 01:52:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.925<-22995 Statuses=0008 0009 01:52:32 Msec=3000 True Az=112.995 Ze=-164.925 Az status=0008 Ze status=0009 01:52:32 Check angles 01:52:32 SkyScan query 01:52:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 01:52:32 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 01:52:32 Message to Master queued w/err=0: serial=126928 error=0 01:52:37 Received message from Master: op=Filter serial=126929 01:52:37 Color wheel filter change from 0 to 0 01:52:37 FLIGetFilterPos err=0 currentPosition=0 01:52:37 FLIGetStepsRemaining err=0 RemainingSteps=0 01:52:37 Filter is already there-color wheel unchanged 01:52:38 Received message from Master: op=Shutter serial=126930 01:52:38 Shutter LASER open 01:52:38 Received message from Camera: op=State serial=126932 01:52:38 GetSingleValue result=40 Value=cccccccc 01:52:38 SkyScan query 01:52:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:52:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:38 Parameters OK 01:52:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:38 Set A/D data flow result=40 01:52:38 Set A/D channel type result=40 01:52:38 Set A/D encoding result=40 01:52:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:38 Set channel filter=0.000000e+000 result=40 01:52:38 Config A/D Result=40 01:52:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:38 Get A/D filter: -9.255963e+061 result=40 01:52:38 Get A/D value=-858993460 result=40 01:52:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:38 Parameters OK 01:52:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:38 Set A/D data flow result=40 01:52:38 Set A/D channel type result=40 01:52:38 Set A/D encoding result=40 01:52:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:38 Set channel filter=0.000000e+000 result=40 01:52:38 Config A/D Result=40 01:52:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:38 Get A/D filter: -9.255963e+061 result=40 01:52:38 Get A/D value=-858993460 result=40 01:52:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:52:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:52:38 Aux= 01:52:38 Message to Camera, serial 126932 queued 01:52:47 Received message from Master: op=Shutter serial=126942 01:52:47 Shutter LASER close 01:52:47 Received message from Master: op=PointingHead serial=126946 01:52:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:52:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:52:48 Point started: ret=0 01:52:48 point_skyscan result=0 01:52:48 Check angles 01:52:48 SkyScan query 01:52:49 SkyScan query done: ret=0 az=89.565<-5971 ze=156.81<-1546 Statuses=0009 0009 01:52:49 Msec=0 True Az=89.565 Ze=156.81 Az status=0009 Ze status=0009 01:52:49 Check angles 01:52:49 SkyScan query 01:52:50 SkyScan query done: ret=0 az=72.06<-4804 ze=135.855<-2943 Statuses=0009 0009 01:52:50 Msec=750 True Az=72.06 Ze=135.855 Az status=0009 Ze status=0009 01:52:50 Check angles 01:52:50 SkyScan query 01:52:50 SkyScan query done: ret=0 az=54.72<-3648 ze=114.9<-4340 Statuses=0009 0009 01:52:50 Msec=1500 True Az=54.72 Ze=114.9 Az status=0009 Ze status=0009 01:52:51 Check angles 01:52:51 SkyScan query 01:52:51 SkyScan query done: ret=0 az=41.01<-2734 ze=93.525<-5765 Statuses=0009 0009 01:52:51 Msec=2250 True Az=41.01 Ze=93.525 Az status=0009 Ze status=0009 01:52:51 Check angles 01:52:51 SkyScan query 01:52:52 SkyScan query done: ret=0 az=40.995<-2733 ze=72.525<-7165 Statuses=0008 0009 01:52:52 Msec=3000 True Az=40.995 Ze=72.525 Az status=0008 Ze status=0009 01:52:52 Check angles 01:52:52 SkyScan query 01:52:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 01:52:53 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 01:52:53 Check angles 01:52:53 SkyScan query 01:52:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:52:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:52:53 Message to Master queued w/err=0: serial=126946 error=0 01:52:58 Received message from Master: op=Filter serial=126947 01:52:58 Color wheel filter change from 0 to 0 01:52:58 FLIGetFilterPos err=0 currentPosition=0 01:52:58 FLIGetStepsRemaining err=0 RemainingSteps=0 01:52:58 Filter is already there-color wheel unchanged 01:52:59 Received message from Master: op=Shutter serial=126948 01:52:59 Shutter LASER close 01:52:59 Received message from Camera: op=State serial=126950 01:52:59 GetSingleValue result=40 Value=cccccccc 01:52:59 SkyScan query 01:52:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:52:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:59 Parameters OK 01:52:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:59 Set A/D data flow result=40 01:52:59 Set A/D channel type result=40 01:52:59 Set A/D encoding result=40 01:52:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:59 Set channel filter=0.000000e+000 result=40 01:52:59 Config A/D Result=40 01:52:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:59 Get A/D filter: -9.255963e+061 result=40 01:52:59 Get A/D value=-858993460 result=40 01:52:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:59 Parameters OK 01:52:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:59 Set A/D data flow result=40 01:52:59 Set A/D channel type result=40 01:52:59 Set A/D encoding result=40 01:52:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:59 Set channel filter=0.000000e+000 result=40 01:52:59 Config A/D Result=40 01:52:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:59 Get A/D filter: -9.255963e+061 result=40 01:52:59 Get A/D value=-858993460 result=40 01:52:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:52:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:52:59 Aux= 01:52:59 Message to Camera, serial 126950 queued 01:53:36 Received message from Master: op=PointingHead serial=126963 01:53:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:53:36 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:53:37 Point started: ret=0 01:53:37 point_skyscan result=0 01:53:37 Check angles 01:53:37 SkyScan query 01:53:38 SkyScan query done: ret=0 az=40.995<-2733 ze=21.3<-10580 Statuses=0008 0009 01:53:38 Msec=0 True Az=40.995 Ze=21.3 Az status=0008 Ze status=0009 01:53:38 Check angles 01:53:38 SkyScan query 01:53:39 SkyScan query done: ret=0 az=40.995<-2733 ze=0.39<-11974 Statuses=0008 0009 01:53:39 Msec=750 True Az=40.995 Ze=0.39 Az status=0008 Ze status=0009 01:53:39 Check angles 01:53:39 SkyScan query 01:53:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.52<-13368 Statuses=0008 0009 01:53:39 Msec=1500 True Az=40.995 Ze=-20.52 Az status=0008 Ze status=0009 01:53:40 Check angles 01:53:40 SkyScan query 01:53:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 01:53:40 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 01:53:40 Check angles 01:53:40 SkyScan query 01:53:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:53:41 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:53:41 Message to Master queued w/err=0: serial=126963 error=0 01:53:46 Received message from Master: op=Filter serial=126964 01:53:46 Color wheel filter change from 0 to 0 01:53:46 FLIGetFilterPos err=0 currentPosition=0 01:53:46 FLIGetStepsRemaining err=0 RemainingSteps=0 01:53:46 Filter is already there-color wheel unchanged 01:53:46 Received message from Master: op=Shutter serial=126965 01:53:46 Shutter LASER close 01:53:46 Received message from Camera: op=State serial=126967 01:53:46 GetSingleValue result=40 Value=cccccccc 01:53:46 SkyScan query 01:53:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:53:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:53:47 Parameters OK 01:53:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:53:47 Set A/D data flow result=40 01:53:47 Set A/D channel type result=40 01:53:47 Set A/D encoding result=40 01:53:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:53:47 Set channel filter=0.000000e+000 result=40 01:53:47 Config A/D Result=40 01:53:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:53:47 Get A/D filter: -9.255963e+061 result=40 01:53:47 Get A/D value=-858993460 result=40 01:53:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:53:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:53:47 Parameters OK 01:53:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:53:47 Set A/D data flow result=40 01:53:47 Set A/D channel type result=40 01:53:47 Set A/D encoding result=40 01:53:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:53:47 Set channel filter=0.000000e+000 result=40 01:53:47 Config A/D Result=40 01:53:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:53:47 Get A/D filter: -9.255963e+061 result=40 01:53:47 Get A/D value=-858993460 result=40 01:53:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:53:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:53:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:53:47 Aux= 01:53:47 Message to Camera, serial 126967 queued 01:54:24 Received message from Master: op=PointingHead serial=126980 01:54:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:54:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:54:24 Point started: ret=0 01:54:24 point_skyscan result=0 01:54:25 Check angles 01:54:25 SkyScan query 01:54:25 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.025<-16535 Statuses=0009 0009 01:54:25 Msec=0 True Az=63.765 Ze=-68.025 Az status=0009 Ze status=0009 01:54:25 Check angles 01:54:25 SkyScan query 01:54:26 SkyScan query done: ret=0 az=81.255<-5417 ze=-88.965<-17931 Statuses=0009 0009 01:54:26 Msec=750 True Az=81.255 Ze=-88.965 Az status=0009 Ze status=0009 01:54:26 Check angles 01:54:26 SkyScan query 01:54:27 SkyScan query done: ret=0 az=98.775<-6585 ze=-109.905<-19327 Statuses=0009 0009 01:54:27 Msec=1500 True Az=98.775 Ze=-109.905 Az status=0009 Ze status=0009 01:54:27 Check angles 01:54:27 SkyScan query 01:54:27 SkyScan query done: ret=0 az=116.205<-7747 ze=-130.875<-20725 Statuses=0009 0009 01:54:27 Msec=2250 True Az=116.205 Ze=-130.875 Az status=0009 Ze status=0009 01:54:28 Check angles 01:54:28 SkyScan query 01:54:28 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 01:54:28 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 01:54:28 Check angles 01:54:28 SkyScan query 01:54:29 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:54:29 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:54:29 Message to Master queued w/err=0: serial=126980 error=0 01:54:34 Received message from Master: op=Filter serial=126981 01:54:34 Color wheel filter change from 0 to 0 01:54:34 FLIGetFilterPos err=0 currentPosition=0 01:54:34 FLIGetStepsRemaining err=0 RemainingSteps=0 01:54:34 Filter is already there-color wheel unchanged 01:54:34 Received message from Master: op=Shutter serial=126982 01:54:34 Shutter LASER close 01:54:34 Received message from Camera: op=State serial=126984 01:54:34 GetSingleValue result=40 Value=cccccccc 01:54:34 SkyScan query 01:54:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:54:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:35 Parameters OK 01:54:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:35 Set A/D data flow result=40 01:54:35 Set A/D channel type result=40 01:54:35 Set A/D encoding result=40 01:54:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:35 Set channel filter=0.000000e+000 result=40 01:54:35 Config A/D Result=40 01:54:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:35 Get A/D filter: -9.255963e+061 result=40 01:54:35 Get A/D value=-858993460 result=40 01:54:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:35 Parameters OK 01:54:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:35 Set A/D data flow result=40 01:54:35 Set A/D channel type result=40 01:54:35 Set A/D encoding result=40 01:54:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:35 Set channel filter=0.000000e+000 result=40 01:54:35 Config A/D Result=40 01:54:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:35 Get A/D filter: -9.255963e+061 result=40 01:54:35 Get A/D value=-858993460 result=40 01:54:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:54:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:54:35 Aux= 01:54:35 Message to Camera, serial 126984 queued 01:55:12 Received message from Master: op=PointingHead serial=126997 01:55:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:55:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:55:12 Point started: ret=0 01:55:12 point_skyscan result=0 01:55:13 Check angles 01:55:13 SkyScan query 01:55:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 01:55:13 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 01:55:14 Check angles 01:55:14 SkyScan query 01:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:55:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:55:14 Message to Master queued w/err=0: serial=126997 error=0 01:55:19 Received message from Master: op=Filter serial=126998 01:55:19 Color wheel filter change from 0 to 0 01:55:19 FLIGetFilterPos err=0 currentPosition=0 01:55:19 FLIGetStepsRemaining err=0 RemainingSteps=0 01:55:19 Filter is already there-color wheel unchanged 01:55:19 Received message from Master: op=Shutter serial=126999 01:55:19 Shutter LASER open 01:55:19 Received message from Camera: op=State serial=127001 01:55:19 GetSingleValue result=40 Value=cccccccc 01:55:19 SkyScan query 01:55:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:55:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:20 Parameters OK 01:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:20 Set A/D data flow result=40 01:55:20 Set A/D channel type result=40 01:55:20 Set A/D encoding result=40 01:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:20 Set channel filter=0.000000e+000 result=40 01:55:20 Config A/D Result=40 01:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:20 Get A/D filter: -9.255963e+061 result=40 01:55:20 Get A/D value=-858993460 result=40 01:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:20 Parameters OK 01:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:20 Set A/D data flow result=40 01:55:20 Set A/D channel type result=40 01:55:20 Set A/D encoding result=40 01:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:20 Set channel filter=0.000000e+000 result=40 01:55:20 Config A/D Result=40 01:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:20 Get A/D filter: -9.255963e+061 result=40 01:55:20 Get A/D value=-858993460 result=40 01:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:55:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:55:20 Aux= 01:55:20 Message to Camera, serial 127001 queued 01:55:28 Received message from Master: op=Shutter serial=127011 01:55:28 Shutter LASER close 01:55:29 Received message from Master: op=PointingHead serial=127015 01:55:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:55:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:55:29 Point started: ret=0 01:55:29 point_skyscan result=0 01:55:30 Check angles 01:55:30 SkyScan query 01:55:31 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.235<-21549 Statuses=0009 0009 01:55:31 Msec=0 True Az=136.005 Ze=-143.235 Az status=0009 Ze status=0009 01:55:31 Check angles 01:55:31 SkyScan query 01:55:32 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.25<-20150 Statuses=0009 0009 01:55:32 Msec=750 True Az=153.555 Ze=-122.25 Az status=0009 Ze status=0009 01:55:32 Check angles 01:55:32 SkyScan query 01:55:32 SkyScan query done: ret=0 az=171<-11400 ze=-101.37<-18758 Statuses=0009 0009 01:55:32 Msec=1500 True Az=171 Ze=-101.37 Az status=0009 Ze status=0009 01:55:32 Check angles 01:55:32 SkyScan query 01:55:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.385<-17359 Statuses=0008 0009 01:55:33 Msec=2250 True Az=176.01 Ze=-80.385 Az status=0008 Ze status=0009 01:55:33 Check angles 01:55:33 SkyScan query 01:55:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.43<-15962 Statuses=0008 0009 01:55:34 Msec=3000 True Az=176.01 Ze=-59.43 Az status=0008 Ze status=0009 01:55:34 Check angles 01:55:34 SkyScan query 01:55:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:55:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:55:35 Message to Master queued w/err=0: serial=127015 error=0 [UTC 2018-12-14 01:55:40] 01:55:40 Received message from Master: op=Filter serial=127016 01:55:40 Color wheel filter change from 0 to 0 01:55:40 FLIGetFilterPos err=0 currentPosition=0 01:55:40 FLIGetStepsRemaining err=0 RemainingSteps=0 01:55:40 Filter is already there-color wheel unchanged 01:55:40 Received message from Master: op=Shutter serial=127017 01:55:40 Shutter LASER close 01:55:40 Received message from Camera: op=State serial=127019 01:55:40 GetSingleValue result=40 Value=cccccccc 01:55:40 SkyScan query 01:55:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:55:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:41 Parameters OK 01:55:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:41 Set A/D data flow result=40 01:55:41 Set A/D channel type result=40 01:55:41 Set A/D encoding result=40 01:55:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:41 Set channel filter=0.000000e+000 result=40 01:55:41 Config A/D Result=40 01:55:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:41 Get A/D filter: -9.255963e+061 result=40 01:55:41 Get A/D value=-858993460 result=40 01:55:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:41 Parameters OK 01:55:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:41 Set A/D data flow result=40 01:55:41 Set A/D channel type result=40 01:55:41 Set A/D encoding result=40 01:55:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:41 Set channel filter=0.000000e+000 result=40 01:55:41 Config A/D Result=40 01:55:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:41 Get A/D filter: -9.255963e+061 result=40 01:55:41 Get A/D value=-858993460 result=40 01:55:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:55:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:55:41 Aux= 01:55:41 Message to Camera, serial 127019 queued [UTC 2018-12-14 01:55:52] 01:56:17 Received message from Master: op=PointingHead serial=127032 01:56:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:56:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:56:18 Point started: ret=0 01:56:18 point_skyscan result=0 01:56:18 Check angles 01:56:18 SkyScan query 01:56:19 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.78<-13452 Statuses=0009 0009 01:56:19 Msec=0 True Az=152.955 Ze=-21.78 Az status=0009 Ze status=0009 01:56:19 Check angles 01:56:19 SkyScan query 01:56:20 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.795<-12053 Statuses=0009 0009 01:56:20 Msec=750 True Az=135.57 Ze=-0.795 Az status=0009 Ze status=0009 01:56:20 Check angles 01:56:20 SkyScan query 01:56:21 SkyScan query done: ret=0 az=117.585<-7839 ze=20.58<-10628 Statuses=0009 0009 01:56:21 Msec=1500 True Az=117.585 Ze=20.58 Az status=0009 Ze status=0009 01:56:21 Check angles 01:56:21 SkyScan query 01:56:21 SkyScan query done: ret=0 az=100.245<-6683 ze=41.58<-9228 Statuses=0009 0009 01:56:21 Msec=2250 True Az=100.245 Ze=41.58 Az status=0009 Ze status=0009 01:56:21 Check angles 01:56:21 SkyScan query 01:56:22 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 01:56:22 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 01:56:22 Check angles 01:56:22 SkyScan query 01:56:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:56:23 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:56:23 Message to Master queued w/err=0: serial=127032 error=0 01:56:28 Received message from Master: op=Filter serial=127033 01:56:28 Color wheel filter change from 0 to 0 01:56:28 FLIGetFilterPos err=0 currentPosition=0 01:56:28 FLIGetStepsRemaining err=0 RemainingSteps=0 01:56:28 Filter is already there-color wheel unchanged 01:56:28 Received message from Master: op=Shutter serial=127034 01:56:28 Shutter LASER close 01:56:28 Received message from Camera: op=State serial=127036 01:56:28 GetSingleValue result=40 Value=cccccccc 01:56:28 SkyScan query 01:56:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:56:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:56:29 Parameters OK 01:56:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:56:29 Set A/D data flow result=40 01:56:29 Set A/D channel type result=40 01:56:29 Set A/D encoding result=40 01:56:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:56:29 Set channel filter=0.000000e+000 result=40 01:56:29 Config A/D Result=40 01:56:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:56:29 Get A/D filter: -9.255963e+061 result=40 01:56:29 Get A/D value=-858993460 result=40 01:56:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:56:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:56:29 Parameters OK 01:56:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:56:29 Set A/D data flow result=40 01:56:29 Set A/D channel type result=40 01:56:29 Set A/D encoding result=40 01:56:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:56:29 Set channel filter=0.000000e+000 result=40 01:56:29 Config A/D Result=40 01:56:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:56:29 Get A/D filter: -9.255963e+061 result=40 01:56:29 Get A/D value=-858993460 result=40 01:56:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:56:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:56:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:56:29 Aux= 01:56:29 Message to Camera, serial 127036 queued 01:57:06 Received message from Master: op=PointingHead serial=127049 01:57:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:57:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:57:06 Point started: ret=0 01:57:06 point_skyscan result=0 01:57:07 Check angles 01:57:07 SkyScan query 01:57:07 SkyScan query done: ret=0 az=85.995<-5733 ze=21.21<-10586 Statuses=0008 0009 01:57:07 Msec=0 True Az=85.995 Ze=21.21 Az status=0008 Ze status=0009 01:57:07 Check angles 01:57:07 SkyScan query 01:57:08 SkyScan query done: ret=0 az=85.995<-5733 ze=0.21<-11986 Statuses=0008 0009 01:57:08 Msec=750 True Az=85.995 Ze=0.21 Az status=0008 Ze status=0009 01:57:08 Check angles 01:57:08 SkyScan query 01:57:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.7<-13380 Statuses=0008 0009 01:57:09 Msec=1500 True Az=85.995 Ze=-20.7 Az status=0008 Ze status=0009 01:57:09 Check angles 01:57:09 SkyScan query 01:57:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.12<-14808 Statuses=0008 0009 01:57:09 Msec=2250 True Az=85.995 Ze=-42.12 Az status=0008 Ze status=0009 01:57:10 Check angles 01:57:10 SkyScan query 01:57:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 01:57:10 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 01:57:10 Message to Master queued w/err=0: serial=127049 error=0 01:57:15 Received message from Master: op=Filter serial=127050 01:57:15 Color wheel filter change from 0 to 0 01:57:15 FLIGetFilterPos err=0 currentPosition=0 01:57:15 FLIGetStepsRemaining err=0 RemainingSteps=0 01:57:15 Filter is already there-color wheel unchanged 01:57:15 Received message from Master: op=Shutter serial=127051 01:57:15 Shutter LASER close 01:57:15 Received message from Camera: op=State serial=127053 01:57:15 GetSingleValue result=40 Value=cccccccc 01:57:15 SkyScan query 01:57:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:57:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:16 Parameters OK 01:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:16 Set A/D data flow result=40 01:57:16 Set A/D channel type result=40 01:57:16 Set A/D encoding result=40 01:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:16 Set channel filter=0.000000e+000 result=40 01:57:16 Config A/D Result=40 01:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:16 Get A/D filter: -9.255963e+061 result=40 01:57:16 Get A/D value=-858993460 result=40 01:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:16 Parameters OK 01:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:16 Set A/D data flow result=40 01:57:16 Set A/D channel type result=40 01:57:16 Set A/D encoding result=40 01:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:16 Set channel filter=0.000000e+000 result=40 01:57:16 Config A/D Result=40 01:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:16 Get A/D filter: -9.255963e+061 result=40 01:57:16 Get A/D value=-858993460 result=40 01:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:57:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:57:16 Aux= 01:57:16 Message to Camera, serial 127053 queued 01:57:52 Received message from Master: op=PointingHead serial=127065 01:57:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:57:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:57:52 Point started: ret=0 01:57:52 point_skyscan result=0 01:57:53 Check angles 01:57:53 SkyScan query 01:57:54 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.195<-17413 Statuses=0009 0009 01:57:54 Msec=0 True Az=108.9 Ze=-81.195 Az status=0009 Ze status=0009 01:57:54 Check angles 01:57:54 SkyScan query 01:57:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 01:57:54 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 01:57:54 Check angles 01:57:54 SkyScan query 01:57:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.09<-20206 Statuses=0008 0009 01:57:55 Msec=1500 True Az=112.995 Ze=-123.09 Az status=0008 Ze status=0009 01:57:55 Check angles 01:57:55 SkyScan query 01:57:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.045<-21603 Statuses=0008 0009 01:57:56 Msec=2250 True Az=112.995 Ze=-144.045 Az status=0008 Ze status=0009 01:57:56 Check angles 01:57:56 SkyScan query 01:57:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165<-23000 Statuses=0008 0009 01:57:57 Msec=3000 True Az=112.995 Ze=-165 Az status=0008 Ze status=0009 01:57:57 Check angles 01:57:57 SkyScan query 01:57:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:57:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:57:57 Message to Master queued w/err=0: serial=127065 error=0 01:58:02 Received message from Master: op=Filter serial=127066 01:58:02 Color wheel filter change from 0 to 0 01:58:02 FLIGetFilterPos err=0 currentPosition=0 01:58:02 FLIGetStepsRemaining err=0 RemainingSteps=0 01:58:02 Filter is already there-color wheel unchanged 01:58:02 Received message from Master: op=Shutter serial=127067 01:58:02 Shutter LASER open 01:58:03 Received message from Camera: op=State serial=127069 01:58:03 GetSingleValue result=40 Value=cccccccc 01:58:03 SkyScan query 01:58:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:58:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:03 Parameters OK 01:58:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:03 Set A/D data flow result=40 01:58:03 Set A/D channel type result=40 01:58:03 Set A/D encoding result=40 01:58:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:03 Set channel filter=0.000000e+000 result=40 01:58:03 Config A/D Result=40 01:58:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:03 Get A/D filter: -9.255963e+061 result=40 01:58:03 Get A/D value=-858993460 result=40 01:58:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:03 Parameters OK 01:58:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:03 Set A/D data flow result=40 01:58:03 Set A/D channel type result=40 01:58:03 Set A/D encoding result=40 01:58:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:03 Set channel filter=0.000000e+000 result=40 01:58:03 Config A/D Result=40 01:58:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:03 Get A/D filter: -9.255963e+061 result=40 01:58:03 Get A/D value=-858993460 result=40 01:58:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:58:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:58:03 Aux= 01:58:03 Message to Camera, serial 127069 queued 01:58:12 Received message from Master: op=Shutter serial=127079 01:58:12 Shutter LASER close 01:58:12 Received message from Master: op=PointingHead serial=127083 01:58:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:58:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:58:12 Point started: ret=0 01:58:12 point_skyscan result=0 01:58:13 Check angles 01:58:13 SkyScan query 01:58:14 SkyScan query done: ret=0 az=89.625<-5975 ze=156.93<-1538 Statuses=0009 0009 01:58:14 Msec=0 True Az=89.625 Ze=156.93 Az status=0009 Ze status=0009 01:58:14 Check angles 01:58:14 SkyScan query 01:58:15 SkyScan query done: ret=0 az=71.82<-4788 ze=135.54<-2964 Statuses=0009 0009 01:58:15 Msec=750 True Az=71.82 Ze=135.54 Az status=0009 Ze status=0009 01:58:15 Check angles 01:58:15 SkyScan query 01:58:15 SkyScan query done: ret=0 az=54.57<-3638 ze=114.555<-4363 Statuses=0009 0009 01:58:15 Msec=1500 True Az=54.57 Ze=114.555 Az status=0009 Ze status=0009 01:58:15 Check angles 01:58:15 SkyScan query 01:58:16 SkyScan query done: ret=0 az=40.965<-2731 ze=93.63<-5758 Statuses=0009 0009 01:58:16 Msec=2250 True Az=40.965 Ze=93.63 Az status=0009 Ze status=0009 01:58:16 Check angles 01:58:16 SkyScan query 01:58:17 SkyScan query done: ret=0 az=40.995<-2733 ze=72.645<-7157 Statuses=0008 0009 01:58:17 Msec=3000 True Az=40.995 Ze=72.645 Az status=0008 Ze status=0009 01:58:17 Check angles 01:58:17 SkyScan query 01:58:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 01:58:18 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 01:58:18 Check angles 01:58:18 SkyScan query 01:58:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:58:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:58:18 Message to Master queued w/err=0: serial=127083 error=0 01:58:23 Received message from Master: op=Filter serial=127084 01:58:23 Color wheel filter change from 0 to 0 01:58:23 FLIGetFilterPos err=0 currentPosition=0 01:58:23 FLIGetStepsRemaining err=0 RemainingSteps=0 01:58:23 Filter is already there-color wheel unchanged 01:58:23 Received message from Master: op=Shutter serial=127085 01:58:23 Shutter LASER close 01:58:24 Received message from Camera: op=State serial=127087 01:58:24 GetSingleValue result=40 Value=cccccccc 01:58:24 SkyScan query 01:58:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:58:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:24 Parameters OK 01:58:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:24 Set A/D data flow result=40 01:58:24 Set A/D channel type result=40 01:58:24 Set A/D encoding result=40 01:58:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:24 Set channel filter=0.000000e+000 result=40 01:58:24 Config A/D Result=40 01:58:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:24 Get A/D filter: -9.255963e+061 result=40 01:58:24 Get A/D value=-858993460 result=40 01:58:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:24 Parameters OK 01:58:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:24 Set A/D data flow result=40 01:58:24 Set A/D channel type result=40 01:58:24 Set A/D encoding result=40 01:58:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:24 Set channel filter=0.000000e+000 result=40 01:58:24 Config A/D Result=40 01:58:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:24 Get A/D filter: -9.255963e+061 result=40 01:58:24 Get A/D value=-858993460 result=40 01:58:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:58:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:58:24 Aux= 01:58:24 Message to Camera, serial 127087 queued 01:59:01 Received message from Master: op=PointingHead serial=127100 01:59:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:59:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:59:02 Point started: ret=0 01:59:02 point_skyscan result=0 01:59:02 Check angles 01:59:02 SkyScan query 01:59:03 SkyScan query done: ret=0 az=40.995<-2733 ze=21.78<-10548 Statuses=0008 0009 01:59:03 Msec=0 True Az=40.995 Ze=21.78 Az status=0008 Ze status=0009 01:59:03 Check angles 01:59:03 SkyScan query 01:59:04 SkyScan query done: ret=0 az=40.995<-2733 ze=0.93<-11938 Statuses=0008 0009 01:59:04 Msec=750 True Az=40.995 Ze=0.93 Az status=0008 Ze status=0009 01:59:04 Check angles 01:59:04 SkyScan query 01:59:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.01<-13334 Statuses=0008 0009 01:59:04 Msec=1500 True Az=40.995 Ze=-20.01 Az status=0008 Ze status=0009 01:59:05 Check angles 01:59:05 SkyScan query 01:59:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 01:59:05 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 01:59:05 Check angles 01:59:05 SkyScan query 01:59:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:59:06 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:59:06 Message to Master queued w/err=0: serial=127100 error=0 01:59:11 Received message from Master: op=Filter serial=127101 01:59:11 Color wheel filter change from 0 to 0 01:59:11 FLIGetFilterPos err=0 currentPosition=0 01:59:11 FLIGetStepsRemaining err=0 RemainingSteps=0 01:59:11 Filter is already there-color wheel unchanged 01:59:11 Received message from Master: op=Shutter serial=127102 01:59:11 Shutter LASER close 01:59:11 Received message from Camera: op=State serial=127104 01:59:11 GetSingleValue result=40 Value=cccccccc 01:59:11 SkyScan query 01:59:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:59:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:12 Parameters OK 01:59:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:12 Set A/D data flow result=40 01:59:12 Set A/D channel type result=40 01:59:12 Set A/D encoding result=40 01:59:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:12 Set channel filter=0.000000e+000 result=40 01:59:12 Config A/D Result=40 01:59:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:12 Get A/D filter: -9.255963e+061 result=40 01:59:12 Get A/D value=-858993460 result=40 01:59:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:12 Parameters OK 01:59:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:12 Set A/D data flow result=40 01:59:12 Set A/D channel type result=40 01:59:12 Set A/D encoding result=40 01:59:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:12 Set channel filter=0.000000e+000 result=40 01:59:12 Config A/D Result=40 01:59:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:12 Get A/D filter: -9.255963e+061 result=40 01:59:12 Get A/D value=-858993460 result=40 01:59:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:59:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:59:12 Aux= 01:59:12 Message to Camera, serial 127104 queued 01:59:49 Received message from Master: op=PointingHead serial=127117 01:59:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:59:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:59:49 Point started: ret=0 01:59:49 point_skyscan result=0 01:59:50 Check angles 01:59:50 SkyScan query 01:59:50 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.325<-16555 Statuses=0009 0009 01:59:50 Msec=0 True Az=64.08 Ze=-68.325 Az status=0009 Ze status=0009 01:59:50 Check angles 01:59:50 SkyScan query 01:59:51 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.31<-17954 Statuses=0009 0009 01:59:51 Msec=750 True Az=81.555 Ze=-89.31 Az status=0009 Ze status=0009 01:59:51 Check angles 01:59:51 SkyScan query 01:59:52 SkyScan query done: ret=0 az=98.985<-6599 ze=-110.25<-19350 Statuses=0009 0009 01:59:52 Msec=1500 True Az=98.985 Ze=-110.25 Az status=0009 Ze status=0009 01:59:52 Check angles 01:59:52 SkyScan query 01:59:53 SkyScan query done: ret=0 az=116.655<-7777 ze=-131.22<-20748 Statuses=0009 0009 01:59:53 Msec=2250 True Az=116.655 Ze=-131.22 Az status=0009 Ze status=0009 01:59:53 Check angles 01:59:53 SkyScan query 01:59:53 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 01:59:53 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 01:59:53 Check angles 01:59:53 SkyScan query 01:59:54 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 01:59:54 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 01:59:54 Message to Master queued w/err=0: serial=127117 error=0 01:59:59 Received message from Master: op=Filter serial=127118 01:59:59 Color wheel filter change from 0 to 0 01:59:59 FLIGetFilterPos err=0 currentPosition=0 01:59:59 FLIGetStepsRemaining err=0 RemainingSteps=0 01:59:59 Filter is already there-color wheel unchanged 01:59:59 Received message from Master: op=Shutter serial=127119 01:59:59 Shutter LASER close 01:59:59 Received message from Camera: op=State serial=127121 01:59:59 GetSingleValue result=40 Value=cccccccc 01:59:59 SkyScan query 02:00:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:00:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:00 Parameters OK 02:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:00 Set A/D data flow result=40 02:00:00 Set A/D channel type result=40 02:00:00 Set A/D encoding result=40 02:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:00 Set channel filter=0.000000e+000 result=40 02:00:00 Config A/D Result=40 02:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:00 Get A/D filter: -9.255963e+061 result=40 02:00:00 Get A/D value=-858993460 result=40 02:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:00 Parameters OK 02:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:00 Set A/D data flow result=40 02:00:00 Set A/D channel type result=40 02:00:00 Set A/D encoding result=40 02:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:00 Set channel filter=0.000000e+000 result=40 02:00:00 Config A/D Result=40 02:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:00 Get A/D filter: -9.255963e+061 result=40 02:00:00 Get A/D value=-858993460 result=40 02:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:00:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:00:00 Aux= 02:00:00 Message to Camera, serial 127121 queued 02:00:37 Received message from Master: op=PointingHead serial=127134 02:00:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:00:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:00:37 Point started: ret=0 02:00:37 point_skyscan result=0 02:00:38 Check angles 02:00:38 SkyScan query 02:00:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 02:00:38 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 02:00:38 Check angles 02:00:38 SkyScan query 02:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:00:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:00:39 Message to Master queued w/err=0: serial=127134 error=0 02:00:44 Received message from Master: op=Filter serial=127135 02:00:44 Color wheel filter change from 0 to 0 02:00:44 FLIGetFilterPos err=0 currentPosition=0 02:00:44 FLIGetStepsRemaining err=0 RemainingSteps=0 02:00:44 Filter is already there-color wheel unchanged 02:00:44 Received message from Master: op=Shutter serial=127136 02:00:44 Shutter LASER open 02:00:44 Received message from Camera: op=State serial=127138 02:00:44 GetSingleValue result=40 Value=cccccccc 02:00:44 SkyScan query 02:00:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:00:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:45 Parameters OK 02:00:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:45 Set A/D data flow result=40 02:00:45 Set A/D channel type result=40 02:00:45 Set A/D encoding result=40 02:00:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:45 Set channel filter=0.000000e+000 result=40 02:00:45 Config A/D Result=40 02:00:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:45 Get A/D filter: -9.255963e+061 result=40 02:00:45 Get A/D value=-858993460 result=40 02:00:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:45 Parameters OK 02:00:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:45 Set A/D data flow result=40 02:00:45 Set A/D channel type result=40 02:00:45 Set A/D encoding result=40 02:00:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:45 Set channel filter=0.000000e+000 result=40 02:00:45 Config A/D Result=40 02:00:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:45 Get A/D filter: -9.255963e+061 result=40 02:00:45 Get A/D value=-858993460 result=40 02:00:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:00:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:00:45 Aux= 02:00:45 Message to Camera, serial 127138 queued 02:00:53 Received message from Master: op=Shutter serial=127148 02:00:53 Shutter LASER close 02:00:54 Received message from Master: op=PointingHead serial=127152 02:00:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:00:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:00:54 Point started: ret=0 02:00:54 point_skyscan result=0 02:00:55 Check angles 02:00:55 SkyScan query 02:00:56 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.16<-21544 Statuses=0009 0009 02:00:56 Msec=0 True Az=135.99 Ze=-143.16 Az status=0009 Ze status=0009 02:00:56 Check angles 02:00:56 SkyScan query 02:00:56 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.77<-20118 Statuses=0009 0009 02:00:56 Msec=750 True Az=153.885 Ze=-121.77 Az status=0009 Ze status=0009 02:00:57 Check angles 02:00:57 SkyScan query 02:00:57 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.8<-18720 Statuses=0009 0009 02:00:57 Msec=1500 True Az=171.435 Ze=-100.8 Az status=0009 Ze status=0009 02:00:57 Check angles 02:00:57 SkyScan query 02:00:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.89<-17326 Statuses=0008 0009 02:00:58 Msec=2250 True Az=176.01 Ze=-79.89 Az status=0008 Ze status=0009 02:00:58 Check angles 02:00:58 SkyScan query 02:00:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.905<-15927 Statuses=0008 0009 02:00:59 Msec=3000 True Az=176.01 Ze=-58.905 Az status=0008 Ze status=0009 02:00:59 Check angles 02:00:59 SkyScan query 02:00:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:00:59 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:00:59 Message to Master queued w/err=0: serial=127152 error=0 02:01:04 Received message from Master: op=Filter serial=127153 02:01:04 Color wheel filter change from 0 to 0 02:01:04 FLIGetFilterPos err=0 currentPosition=0 02:01:04 FLIGetStepsRemaining err=0 RemainingSteps=0 02:01:04 Filter is already there-color wheel unchanged 02:01:05 Received message from Master: op=Shutter serial=127154 02:01:05 Shutter LASER close 02:01:05 Received message from Camera: op=State serial=127156 02:01:05 GetSingleValue result=40 Value=cccccccc 02:01:05 SkyScan query 02:01:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:01:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:05 Parameters OK 02:01:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:05 Set A/D data flow result=40 02:01:05 Set A/D channel type result=40 02:01:05 Set A/D encoding result=40 02:01:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:05 Set channel filter=0.000000e+000 result=40 02:01:05 Config A/D Result=40 02:01:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:05 Get A/D filter: -9.255963e+061 result=40 02:01:05 Get A/D value=-858993460 result=40 02:01:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:05 Parameters OK 02:01:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:05 Set A/D data flow result=40 02:01:05 Set A/D channel type result=40 02:01:05 Set A/D encoding result=40 02:01:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:05 Set channel filter=0.000000e+000 result=40 02:01:05 Config A/D Result=40 02:01:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:05 Get A/D filter: -9.255963e+061 result=40 02:01:05 Get A/D value=-858993460 result=40 02:01:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:01:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:01:05 Aux= 02:01:05 Message to Camera, serial 127156 queued 02:01:41 Received message from Master: op=PointingHead serial=127168 02:01:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:01:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:01:42 Point started: ret=0 02:01:42 point_skyscan result=0 02:01:42 Check angles 02:01:42 SkyScan query 02:01:43 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.72<-13448 Statuses=0009 0009 02:01:43 Msec=0 True Az=152.985 Ze=-21.72 Az status=0009 Ze status=0009 02:01:43 Check angles 02:01:43 SkyScan query 02:01:44 SkyScan query done: ret=0 az=135.075<-9005 ze=-0.255<-12017 Statuses=0009 0009 02:01:44 Msec=750 True Az=135.075 Ze=-0.255 Az status=0009 Ze status=0009 02:01:44 Check angles 02:01:44 SkyScan query 02:01:44 SkyScan query done: ret=0 az=117.285<-7819 ze=21.135<-10591 Statuses=0009 0009 02:01:44 Msec=1500 True Az=117.285 Ze=21.135 Az status=0009 Ze status=0009 02:01:45 Check angles 02:01:45 SkyScan query 02:01:45 SkyScan query done: ret=0 az=99.885<-6659 ze=42.075<-9195 Statuses=0009 0009 02:01:45 Msec=2250 True Az=99.885 Ze=42.075 Az status=0009 Ze status=0009 02:01:45 Check angles 02:01:45 SkyScan query 02:01:46 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 02:01:46 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 02:01:46 Check angles 02:01:46 SkyScan query 02:01:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:01:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:01:47 Message to Master queued w/err=0: serial=127168 error=0 02:01:52 Received message from Master: op=Filter serial=127169 02:01:52 Color wheel filter change from 0 to 0 02:01:52 FLIGetFilterPos err=0 currentPosition=0 02:01:52 FLIGetStepsRemaining err=0 RemainingSteps=0 02:01:52 Filter is already there-color wheel unchanged 02:01:52 Received message from Master: op=Shutter serial=127170 02:01:52 Shutter LASER close 02:01:52 Received message from Camera: op=State serial=127172 02:01:52 GetSingleValue result=40 Value=cccccccc 02:01:52 SkyScan query 02:01:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:01:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:53 Parameters OK 02:01:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:53 Set A/D data flow result=40 02:01:53 Set A/D channel type result=40 02:01:53 Set A/D encoding result=40 02:01:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:53 Set channel filter=0.000000e+000 result=40 02:01:53 Config A/D Result=40 02:01:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:53 Get A/D filter: -9.255963e+061 result=40 02:01:53 Get A/D value=-858993460 result=40 02:01:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:53 Parameters OK 02:01:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:53 Set A/D data flow result=40 02:01:53 Set A/D channel type result=40 02:01:53 Set A/D encoding result=40 02:01:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:53 Set channel filter=0.000000e+000 result=40 02:01:53 Config A/D Result=40 02:01:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:53 Get A/D filter: -9.255963e+061 result=40 02:01:53 Get A/D value=-858993460 result=40 02:01:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:01:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:01:53 Aux= 02:01:53 Message to Camera, serial 127172 queued 02:02:30 Received message from Master: op=PointingHead serial=127185 02:02:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:02:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:02:30 Point started: ret=0 02:02:30 point_skyscan result=0 02:02:31 Check angles 02:02:31 SkyScan query 02:02:31 SkyScan query done: ret=0 az=85.995<-5733 ze=21.6<-10560 Statuses=0008 0009 02:02:31 Msec=0 True Az=85.995 Ze=21.6 Az status=0008 Ze status=0009 02:02:31 Check angles 02:02:31 SkyScan query 02:02:32 SkyScan query done: ret=0 az=85.995<-5733 ze=0.195<-11987 Statuses=0008 0009 02:02:32 Msec=750 True Az=85.995 Ze=0.195 Az status=0008 Ze status=0009 02:02:32 Check angles 02:02:32 SkyScan query 02:02:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.715<-13381 Statuses=0008 0009 02:02:33 Msec=1500 True Az=85.995 Ze=-20.715 Az status=0008 Ze status=0009 02:02:33 Check angles 02:02:33 SkyScan query 02:02:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.135<-14809 Statuses=0008 0009 02:02:33 Msec=2250 True Az=85.995 Ze=-42.135 Az status=0008 Ze status=0009 02:02:34 Check angles 02:02:34 SkyScan query 02:02:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:02:34 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:02:34 Message to Master queued w/err=0: serial=127185 error=0 02:02:39 Received message from Master: op=Filter serial=127186 02:02:39 Color wheel filter change from 0 to 0 02:02:39 FLIGetFilterPos err=0 currentPosition=0 02:02:39 FLIGetStepsRemaining err=0 RemainingSteps=0 02:02:39 Filter is already there-color wheel unchanged 02:02:39 Received message from Master: op=Shutter serial=127187 02:02:39 Shutter LASER close 02:02:39 Received message from Camera: op=State serial=127189 02:02:39 GetSingleValue result=40 Value=cccccccc 02:02:39 SkyScan query 02:02:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:02:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:40 Parameters OK 02:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:40 Set A/D data flow result=40 02:02:40 Set A/D channel type result=40 02:02:40 Set A/D encoding result=40 02:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:40 Set channel filter=0.000000e+000 result=40 02:02:40 Config A/D Result=40 02:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:40 Get A/D filter: -9.255963e+061 result=40 02:02:40 Get A/D value=-858993460 result=40 02:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:40 Parameters OK 02:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:40 Set A/D data flow result=40 02:02:40 Set A/D channel type result=40 02:02:40 Set A/D encoding result=40 02:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:40 Set channel filter=0.000000e+000 result=40 02:02:40 Config A/D Result=40 02:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:40 Get A/D filter: -9.255963e+061 result=40 02:02:40 Get A/D value=-858993460 result=40 02:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:02:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:02:40 Aux= 02:02:40 Message to Camera, serial 127189 queued 02:03:17 Received message from Master: op=PointingHead serial=127202 02:03:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:03:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:03:17 Point started: ret=0 02:03:17 point_skyscan result=0 02:03:18 Check angles 02:03:18 SkyScan query 02:03:19 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.69<-17446 Statuses=0009 0009 02:03:19 Msec=0 True Az=109.38 Ze=-81.69 Az status=0009 Ze status=0009 02:03:19 Check angles 02:03:19 SkyScan query 02:03:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 02:03:19 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 02:03:19 Check angles 02:03:19 SkyScan query 02:03:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 02:03:20 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 02:03:20 Check angles 02:03:20 SkyScan query 02:03:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.99<-21666 Statuses=0008 0009 02:03:21 Msec=2250 True Az=112.995 Ze=-144.99 Az status=0008 Ze status=0009 02:03:21 Check angles 02:03:21 SkyScan query 02:03:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.9<-23060 Statuses=0008 0009 02:03:22 Msec=3000 True Az=112.995 Ze=-165.9 Az status=0008 Ze status=0009 02:03:22 Check angles 02:03:22 SkyScan query 02:03:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:03:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:03:22 Message to Master queued w/err=0: serial=127202 error=0 02:03:27 Received message from Master: op=Filter serial=127203 02:03:27 Color wheel filter change from 0 to 0 02:03:27 FLIGetFilterPos err=0 currentPosition=0 02:03:27 FLIGetStepsRemaining err=0 RemainingSteps=0 02:03:27 Filter is already there-color wheel unchanged 02:03:28 Received message from Master: op=Shutter serial=127204 02:03:28 Shutter LASER open 02:03:28 Received message from Camera: op=State serial=127206 02:03:28 GetSingleValue result=40 Value=cccccccc 02:03:28 SkyScan query 02:03:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:03:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:28 Parameters OK 02:03:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:28 Set A/D data flow result=40 02:03:28 Set A/D channel type result=40 02:03:28 Set A/D encoding result=40 02:03:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:28 Set channel filter=0.000000e+000 result=40 02:03:28 Config A/D Result=40 02:03:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:28 Get A/D filter: -9.255963e+061 result=40 02:03:28 Get A/D value=-858993460 result=40 02:03:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:28 Parameters OK 02:03:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:28 Set A/D data flow result=40 02:03:28 Set A/D channel type result=40 02:03:28 Set A/D encoding result=40 02:03:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:28 Set channel filter=0.000000e+000 result=40 02:03:28 Config A/D Result=40 02:03:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:28 Get A/D filter: -9.255963e+061 result=40 02:03:28 Get A/D value=-858993460 result=40 02:03:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:03:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:03:28 Aux= 02:03:28 Message to Camera, serial 127206 queued 02:03:37 Received message from Master: op=Shutter serial=127216 02:03:37 Shutter LASER close 02:03:37 Received message from Master: op=PointingHead serial=127220 02:03:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:03:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:03:38 Point started: ret=0 02:03:38 point_skyscan result=0 02:03:38 Check angles 02:03:38 SkyScan query 02:03:39 SkyScan query done: ret=0 az=89.805<-5987 ze=157.125<-1525 Statuses=0009 0009 02:03:39 Msec=0 True Az=89.805 Ze=157.125 Az status=0009 Ze status=0009 02:03:39 Check angles 02:03:39 SkyScan query 02:03:40 SkyScan query done: ret=0 az=72.285<-4819 ze=136.17<-2922 Statuses=0009 0009 02:03:40 Msec=750 True Az=72.285 Ze=136.17 Az status=0009 Ze status=0009 02:03:40 Check angles 02:03:40 SkyScan query 02:03:40 SkyScan query done: ret=0 az=54.96<-3664 ze=115.2<-4320 Statuses=0009 0009 02:03:40 Msec=1500 True Az=54.96 Ze=115.2 Az status=0009 Ze status=0009 02:03:41 Check angles 02:03:41 SkyScan query 02:03:41 SkyScan query done: ret=0 az=40.98<-2732 ze=94.245<-5717 Statuses=0009 0009 02:03:41 Msec=2250 True Az=40.98 Ze=94.245 Az status=0009 Ze status=0009 02:03:41 Check angles 02:03:41 SkyScan query 02:03:42 SkyScan query done: ret=0 az=40.995<-2733 ze=73.26<-7116 Statuses=0008 0009 02:03:42 Msec=3000 True Az=40.995 Ze=73.26 Az status=0008 Ze status=0009 02:03:42 Check angles 02:03:42 SkyScan query 02:03:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 02:03:43 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 02:03:43 Check angles 02:03:43 SkyScan query 02:03:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:03:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:03:43 Message to Master queued w/err=0: serial=127220 error=0 02:03:48 Received message from Master: op=Filter serial=127221 02:03:48 Color wheel filter change from 0 to 0 02:03:48 FLIGetFilterPos err=0 currentPosition=0 02:03:48 FLIGetStepsRemaining err=0 RemainingSteps=0 02:03:48 Filter is already there-color wheel unchanged 02:03:49 Received message from Master: op=Shutter serial=127222 02:03:49 Shutter LASER close 02:03:49 Received message from Camera: op=State serial=127224 02:03:49 GetSingleValue result=40 Value=cccccccc 02:03:49 SkyScan query 02:03:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:03:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:49 Parameters OK 02:03:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:49 Set A/D data flow result=40 02:03:49 Set A/D channel type result=40 02:03:49 Set A/D encoding result=40 02:03:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:49 Set channel filter=0.000000e+000 result=40 02:03:49 Config A/D Result=40 02:03:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:49 Get A/D filter: -9.255963e+061 result=40 02:03:49 Get A/D value=-858993460 result=40 02:03:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:49 Parameters OK 02:03:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:49 Set A/D data flow result=40 02:03:49 Set A/D channel type result=40 02:03:49 Set A/D encoding result=40 02:03:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:49 Set channel filter=0.000000e+000 result=40 02:03:49 Config A/D Result=40 02:03:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:49 Get A/D filter: -9.255963e+061 result=40 02:03:49 Get A/D value=-858993460 result=40 02:03:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:03:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:03:49 Aux= 02:03:49 Message to Camera, serial 127224 queued 02:04:26 Received message from Master: op=PointingHead serial=127237 02:04:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:04:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:04:27 Point started: ret=0 02:04:27 point_skyscan result=0 02:04:27 Check angles 02:04:27 SkyScan query 02:04:28 SkyScan query done: ret=0 az=40.995<-2733 ze=21.84<-10544 Statuses=0008 0009 02:04:28 Msec=0 True Az=40.995 Ze=21.84 Az status=0008 Ze status=0009 02:04:28 Check angles 02:04:28 SkyScan query 02:04:29 SkyScan query done: ret=0 az=40.995<-2733 ze=0.87<-11942 Statuses=0008 0009 02:04:29 Msec=750 True Az=40.995 Ze=0.87 Az status=0008 Ze status=0009 02:04:29 Check angles 02:04:29 SkyScan query 02:04:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.085<-13339 Statuses=0008 0009 02:04:29 Msec=1500 True Az=40.995 Ze=-20.085 Az status=0008 Ze status=0009 02:04:30 Check angles 02:04:30 SkyScan query 02:04:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.52<-14568 Statuses=0008 0009 02:04:30 Msec=2250 True Az=40.995 Ze=-38.52 Az status=0008 Ze status=0009 02:04:30 Check angles 02:04:30 SkyScan query 02:04:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:04:31 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:04:31 Message to Master queued w/err=0: serial=127237 error=0 02:04:36 Received message from Master: op=Filter serial=127238 02:04:36 Color wheel filter change from 0 to 0 02:04:36 FLIGetFilterPos err=0 currentPosition=0 02:04:36 FLIGetStepsRemaining err=0 RemainingSteps=0 02:04:36 Filter is already there-color wheel unchanged 02:04:36 Received message from Master: op=Shutter serial=127239 02:04:36 Shutter LASER close 02:04:36 Received message from Camera: op=State serial=127241 02:04:36 GetSingleValue result=40 Value=cccccccc 02:04:36 SkyScan query 02:04:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:04:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:04:37 Parameters OK 02:04:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:04:37 Set A/D data flow result=40 02:04:37 Set A/D channel type result=40 02:04:37 Set A/D encoding result=40 02:04:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:04:37 Set channel filter=0.000000e+000 result=40 02:04:37 Config A/D Result=40 02:04:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:04:37 Get A/D filter: -9.255963e+061 result=40 02:04:37 Get A/D value=-858993460 result=40 02:04:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:04:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:04:37 Parameters OK 02:04:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:04:37 Set A/D data flow result=40 02:04:37 Set A/D channel type result=40 02:04:37 Set A/D encoding result=40 02:04:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:04:37 Set channel filter=0.000000e+000 result=40 02:04:37 Config A/D Result=40 02:04:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:04:37 Get A/D filter: -9.255963e+061 result=40 02:04:37 Get A/D value=-858993460 result=40 02:04:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:04:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:04:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:04:37 Aux= 02:04:37 Message to Camera, serial 127241 queued 02:05:14 Received message from Master: op=PointingHead serial=127254 02:05:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:05:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:05:14 Point started: ret=0 02:05:14 point_skyscan result=0 02:05:15 Check angles 02:05:15 SkyScan query 02:05:15 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.085<-16539 Statuses=0009 0009 02:05:15 Msec=0 True Az=63.81 Ze=-68.085 Az status=0009 Ze status=0009 02:05:15 Check angles 02:05:15 SkyScan query 02:05:16 SkyScan query done: ret=0 az=81.21<-5414 ze=-89.07<-17938 Statuses=0009 0009 02:05:16 Msec=750 True Az=81.21 Ze=-89.07 Az status=0009 Ze status=0009 02:05:16 Check angles 02:05:16 SkyScan query 02:05:17 SkyScan query done: ret=0 az=98.715<-6581 ze=-109.98<-19332 Statuses=0009 0009 02:05:17 Msec=1500 True Az=98.715 Ze=-109.98 Az status=0009 Ze status=0009 02:05:17 Check angles 02:05:17 SkyScan query 02:05:17 SkyScan query done: ret=0 az=116.28<-7752 ze=-130.965<-20731 Statuses=0009 0009 02:05:17 Msec=2250 True Az=116.28 Ze=-130.965 Az status=0009 Ze status=0009 02:05:18 Check angles 02:05:18 SkyScan query 02:05:18 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.555<-21437 Statuses=0009 0008 02:05:18 Msec=3000 True Az=131.085 Ze=-141.555 Az status=0009 Ze status=0008 02:05:18 Check angles 02:05:18 SkyScan query 02:05:19 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 02:05:19 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 02:05:19 Message to Master queued w/err=0: serial=127254 error=0 02:05:24 Received message from Master: op=Filter serial=127255 02:05:24 Color wheel filter change from 0 to 0 02:05:24 FLIGetFilterPos err=0 currentPosition=0 02:05:24 FLIGetStepsRemaining err=0 RemainingSteps=0 02:05:24 Filter is already there-color wheel unchanged 02:05:24 Received message from Master: op=Shutter serial=127256 02:05:24 Shutter LASER close 02:05:24 Received message from Camera: op=State serial=127258 02:05:24 GetSingleValue result=40 Value=cccccccc 02:05:24 SkyScan query 02:05:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:05:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:25 Parameters OK 02:05:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:25 Set A/D data flow result=40 02:05:25 Set A/D channel type result=40 02:05:25 Set A/D encoding result=40 02:05:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:25 Set channel filter=0.000000e+000 result=40 02:05:25 Config A/D Result=40 02:05:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:25 Get A/D filter: -9.255963e+061 result=40 02:05:25 Get A/D value=-858993460 result=40 02:05:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:25 Parameters OK 02:05:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:25 Set A/D data flow result=40 02:05:25 Set A/D channel type result=40 02:05:25 Set A/D encoding result=40 02:05:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:25 Set channel filter=0.000000e+000 result=40 02:05:25 Config A/D Result=40 02:05:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:25 Get A/D filter: -9.255963e+061 result=40 02:05:25 Get A/D value=-858993460 result=40 02:05:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:05:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:05:25 Aux= 02:05:25 Message to Camera, serial 127258 queued 02:06:02 Received message from Master: op=PointingHead serial=127271 02:06:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:06:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:06:02 Point started: ret=0 02:06:02 point_skyscan result=0 02:06:03 Check angles 02:06:03 SkyScan query 02:06:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 02:06:03 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 02:06:03 Check angles 02:06:03 SkyScan query 02:06:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:06:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:06:04 Message to Master queued w/err=0: serial=127271 error=0 02:06:09 Received message from Master: op=Filter serial=127272 02:06:09 Color wheel filter change from 0 to 0 02:06:09 FLIGetFilterPos err=0 currentPosition=0 02:06:09 FLIGetStepsRemaining err=0 RemainingSteps=0 02:06:09 Filter is already there-color wheel unchanged 02:06:09 Received message from Master: op=Shutter serial=127273 02:06:09 Shutter LASER open 02:06:09 Received message from Camera: op=State serial=127275 02:06:09 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-14 02:06:09] 02:06:09 SkyScan query 02:06:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:06:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:10 Parameters OK 02:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:10 Set A/D data flow result=40 02:06:10 Set A/D channel type result=40 02:06:10 Set A/D encoding result=40 02:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:10 Set channel filter=0.000000e+000 result=40 02:06:10 Config A/D Result=40 02:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:10 Get A/D filter: -9.255963e+061 result=40 02:06:10 Get A/D value=-858993460 result=40 02:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:10 Parameters OK 02:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:10 Set A/D data flow result=40 02:06:10 Set A/D channel type result=40 02:06:10 Set A/D encoding result=40 02:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:10 Set channel filter=0.000000e+000 result=40 02:06:10 Config A/D Result=40 02:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:10 Get A/D filter: -9.255963e+061 result=40 02:06:10 Get A/D value=-858993460 result=40 02:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:06:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:06:10 Aux= 02:06:10 Message to Camera, serial 127275 queued 02:06:18 Received message from Master: op=Shutter serial=127285 02:06:18 Shutter LASER close 02:06:19 Received message from Master: op=PointingHead serial=127289 02:06:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:06:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:06:19 Point started: ret=0 02:06:19 point_skyscan result=0 02:06:20 Check angles 02:06:20 SkyScan query 02:06:21 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.875<-21525 Statuses=0009 0009 02:06:21 Msec=0 True Az=136.23 Ze=-142.875 Az status=0009 Ze status=0009 02:06:21 Check angles 02:06:21 SkyScan query 02:06:21 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.92<-20128 Statuses=0009 0009 02:06:21 Msec=750 True Az=153.825 Ze=-121.92 Az status=0009 Ze status=0009 02:06:22 Check angles 02:06:22 SkyScan query 02:06:22 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.01<-18734 Statuses=0009 0009 02:06:22 Msec=1500 True Az=171.225 Ze=-101.01 Az status=0009 Ze status=0009 02:06:22 Check angles 02:06:22 SkyScan query 02:06:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.07<-17338 Statuses=0008 0009 02:06:23 Msec=2250 True Az=176.01 Ze=-80.07 Az status=0008 Ze status=0009 02:06:23 Check angles 02:06:23 SkyScan query 02:06:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.07<-15938 Statuses=0008 0009 02:06:24 Msec=3000 True Az=176.01 Ze=-59.07 Az status=0008 Ze status=0009 02:06:24 Check angles 02:06:24 SkyScan query 02:06:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 02:06:24 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 02:06:24 Message to Master queued w/err=0: serial=127289 error=0 02:06:29 Received message from Master: op=Filter serial=127290 02:06:29 Color wheel filter change from 0 to 0 02:06:29 FLIGetFilterPos err=0 currentPosition=0 02:06:29 FLIGetStepsRemaining err=0 RemainingSteps=0 02:06:29 Filter is already there-color wheel unchanged 02:06:30 Received message from Master: op=Shutter serial=127291 02:06:30 Shutter LASER close 02:06:30 Received message from Camera: op=State serial=127293 02:06:30 GetSingleValue result=40 Value=cccccccc 02:06:30 SkyScan query 02:06:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:06:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:30 Parameters OK 02:06:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:30 Set A/D data flow result=40 02:06:30 Set A/D channel type result=40 02:06:30 Set A/D encoding result=40 02:06:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:30 Set channel filter=0.000000e+000 result=40 02:06:30 Config A/D Result=40 02:06:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:30 Get A/D filter: -9.255963e+061 result=40 02:06:30 Get A/D value=-858993460 result=40 02:06:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:30 Parameters OK 02:06:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:30 Set A/D data flow result=40 02:06:30 Set A/D channel type result=40 02:06:30 Set A/D encoding result=40 02:06:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:30 Set channel filter=0.000000e+000 result=40 02:06:30 Config A/D Result=40 02:06:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:30 Get A/D filter: -9.255963e+061 result=40 02:06:30 Get A/D value=-858993460 result=40 02:06:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:06:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:06:30 Aux= 02:06:30 Message to Camera, serial 127293 queued 02:07:07 Received message from Master: op=PointingHead serial=127306 02:07:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:07:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:07:07 Point started: ret=0 02:07:07 point_skyscan result=0 02:07:08 Check angles 02:07:08 SkyScan query 02:07:09 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.975<-13465 Statuses=0009 0009 02:07:09 Msec=0 True Az=153.18 Ze=-21.975 Az status=0009 Ze status=0009 02:07:09 Check angles 02:07:09 SkyScan query 02:07:10 SkyScan query done: ret=0 az=135.72<-9048 ze=-1.005<-12067 Statuses=0009 0009 02:07:10 Msec=750 True Az=135.72 Ze=-1.005 Az status=0009 Ze status=0009 02:07:10 Check angles 02:07:10 SkyScan query 02:07:10 SkyScan query done: ret=0 az=118.23<-7882 ze=19.965<-10669 Statuses=0009 0009 02:07:10 Msec=1500 True Az=118.23 Ze=19.965 Az status=0009 Ze status=0009 02:07:10 Check angles 02:07:10 SkyScan query 02:07:11 SkyScan query done: ret=0 az=100.74<-6716 ze=40.905<-9273 Statuses=0009 0009 02:07:11 Msec=2250 True Az=100.74 Ze=40.905 Az status=0009 Ze status=0009 02:07:11 Check angles 02:07:11 SkyScan query 02:07:12 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 02:07:12 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 02:07:12 Check angles 02:07:12 SkyScan query 02:07:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:07:13 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:07:13 Message to Master queued w/err=0: serial=127306 error=0 02:07:18 Received message from Master: op=Filter serial=127307 02:07:18 Color wheel filter change from 0 to 0 02:07:18 FLIGetFilterPos err=0 currentPosition=0 02:07:18 FLIGetStepsRemaining err=0 RemainingSteps=0 02:07:18 Filter is already there-color wheel unchanged 02:07:18 Received message from Master: op=Shutter serial=127308 02:07:18 Shutter LASER close 02:07:18 Received message from Camera: op=State serial=127310 02:07:18 GetSingleValue result=40 Value=cccccccc 02:07:18 SkyScan query 02:07:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:07:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:07:18 Parameters OK 02:07:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:07:18 Set A/D data flow result=40 02:07:18 Set A/D channel type result=40 02:07:18 Set A/D encoding result=40 02:07:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:07:18 Set channel filter=0.000000e+000 result=40 02:07:18 Config A/D Result=40 02:07:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:07:18 Get A/D filter: -9.255963e+061 result=40 02:07:18 Get A/D value=-858993460 result=40 02:07:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:07:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:07:18 Parameters OK 02:07:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:07:18 Set A/D data flow result=40 02:07:18 Set A/D channel type result=40 02:07:18 Set A/D encoding result=40 02:07:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:07:18 Set channel filter=0.000000e+000 result=40 02:07:18 Config A/D Result=40 02:07:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:07:18 Get A/D filter: -9.255963e+061 result=40 02:07:18 Get A/D value=-858993460 result=40 02:07:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:07:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:07:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:07:18 Aux= 02:07:18 Message to Camera, serial 127310 queued 02:07:54 Received message from Master: op=PointingHead serial=127322 02:07:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:07:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:07:55 Point started: ret=0 02:07:55 point_skyscan result=0 02:07:55 Check angles 02:07:55 SkyScan query 02:07:56 SkyScan query done: ret=0 az=85.995<-5733 ze=21.63<-10558 Statuses=0008 0009 02:07:56 Msec=0 True Az=85.995 Ze=21.63 Az status=0008 Ze status=0009 02:07:56 Check angles 02:07:56 SkyScan query 02:07:57 SkyScan query done: ret=0 az=85.995<-5733 ze=0.66<-11956 Statuses=0008 0009 02:07:57 Msec=750 True Az=85.995 Ze=0.66 Az status=0008 Ze status=0009 02:07:57 Check angles 02:07:57 SkyScan query 02:07:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.295<-13353 Statuses=0008 0009 02:07:58 Msec=1500 True Az=85.995 Ze=-20.295 Az status=0008 Ze status=0009 02:07:58 Check angles 02:07:58 SkyScan query 02:07:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.67<-14778 Statuses=0008 0009 02:07:58 Msec=2250 True Az=85.995 Ze=-41.67 Az status=0008 Ze status=0009 02:07:58 Check angles 02:07:58 SkyScan query 02:07:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:07:59 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:07:59 Message to Master queued w/err=0: serial=127322 error=0 02:08:04 Received message from Master: op=Filter serial=127323 02:08:04 Color wheel filter change from 0 to 0 02:08:04 FLIGetFilterPos err=0 currentPosition=0 02:08:04 FLIGetStepsRemaining err=0 RemainingSteps=0 02:08:04 Filter is already there-color wheel unchanged 02:08:04 Received message from Master: op=Shutter serial=127324 02:08:04 Shutter LASER close 02:08:04 Received message from Camera: op=State serial=127326 02:08:04 GetSingleValue result=40 Value=cccccccc 02:08:04 SkyScan query 02:08:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:08:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:05 Parameters OK 02:08:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:05 Set A/D data flow result=40 02:08:05 Set A/D channel type result=40 02:08:05 Set A/D encoding result=40 02:08:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:05 Set channel filter=0.000000e+000 result=40 02:08:05 Config A/D Result=40 02:08:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:05 Get A/D filter: -9.255963e+061 result=40 02:08:05 Get A/D value=-858993460 result=40 02:08:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:05 Parameters OK 02:08:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:05 Set A/D data flow result=40 02:08:05 Set A/D channel type result=40 02:08:05 Set A/D encoding result=40 02:08:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:05 Set channel filter=0.000000e+000 result=40 02:08:05 Config A/D Result=40 02:08:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:05 Get A/D filter: -9.255963e+061 result=40 02:08:05 Get A/D value=-858993460 result=40 02:08:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:08:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:08:05 Aux= 02:08:05 Message to Camera, serial 127326 queued 02:08:42 Received message from Master: op=PointingHead serial=127339 02:08:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:08:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:08:42 Point started: ret=0 02:08:42 point_skyscan result=0 02:08:43 Check angles 02:08:43 SkyScan query 02:08:43 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.195<-17413 Statuses=0009 0009 02:08:43 Msec=0 True Az=108.93 Ze=-81.195 Az status=0009 Ze status=0009 02:08:44 Check angles 02:08:44 SkyScan query 02:08:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 02:08:44 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 02:08:44 Check angles 02:08:44 SkyScan query 02:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 02:08:45 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 02:08:45 Check angles 02:08:45 SkyScan query 02:08:46 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.48<-21632 Statuses=0008 0009 02:08:46 Msec=2250 True Az=112.98 Ze=-144.48 Az status=0008 Ze status=0009 02:08:46 Check angles 02:08:46 SkyScan query 02:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.825<-23055 Statuses=0008 0009 02:08:46 Msec=3000 True Az=112.995 Ze=-165.825 Az status=0008 Ze status=0009 02:08:47 Check angles 02:08:47 SkyScan query 02:08:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:08:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:08:47 Message to Master queued w/err=0: serial=127339 error=0 02:08:52 Received message from Master: op=Filter serial=127340 02:08:52 Color wheel filter change from 0 to 0 02:08:52 FLIGetFilterPos err=0 currentPosition=0 02:08:52 FLIGetStepsRemaining err=0 RemainingSteps=0 02:08:52 Filter is already there-color wheel unchanged 02:08:52 Received message from Master: op=Shutter serial=127341 02:08:52 Shutter LASER open 02:08:53 Received message from Camera: op=State serial=127343 02:08:53 GetSingleValue result=40 Value=cccccccc 02:08:53 SkyScan query 02:08:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:08:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:53 Parameters OK 02:08:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:53 Set A/D data flow result=40 02:08:53 Set A/D channel type result=40 02:08:53 Set A/D encoding result=40 02:08:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:53 Set channel filter=0.000000e+000 result=40 02:08:53 Config A/D Result=40 02:08:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:53 Get A/D filter: -9.255963e+061 result=40 02:08:53 Get A/D value=-858993460 result=40 02:08:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:53 Parameters OK 02:08:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:53 Set A/D data flow result=40 02:08:53 Set A/D channel type result=40 02:08:53 Set A/D encoding result=40 02:08:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:53 Set channel filter=0.000000e+000 result=40 02:08:53 Config A/D Result=40 02:08:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:53 Get A/D filter: -9.255963e+061 result=40 02:08:53 Get A/D value=-858993460 result=40 02:08:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:08:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:08:53 Aux= 02:08:53 Message to Camera, serial 127343 queued 02:09:02 Received message from Master: op=Shutter serial=127353 02:09:02 Shutter LASER close 02:09:02 Received message from Master: op=PointingHead serial=127357 02:09:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:09:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:09:02 Point started: ret=0 02:09:02 point_skyscan result=0 02:09:03 Check angles 02:09:03 SkyScan query 02:09:04 SkyScan query done: ret=0 az=89.985<-5999 ze=157.35<-1510 Statuses=0009 0009 02:09:04 Msec=0 True Az=89.985 Ze=157.35 Az status=0009 Ze status=0009 02:09:04 Check angles 02:09:04 SkyScan query 02:09:04 SkyScan query done: ret=0 az=72.585<-4839 ze=136.395<-2907 Statuses=0009 0009 02:09:04 Msec=750 True Az=72.585 Ze=136.395 Az status=0009 Ze status=0009 02:09:05 Check angles 02:09:05 SkyScan query 02:09:05 SkyScan query done: ret=0 az=55.23<-3682 ze=115.47<-4302 Statuses=0009 0009 02:09:05 Msec=1500 True Az=55.23 Ze=115.47 Az status=0009 Ze status=0009 02:09:05 Check angles 02:09:05 SkyScan query 02:09:06 SkyScan query done: ret=0 az=41.01<-2734 ze=94.38<-5708 Statuses=0009 0009 02:09:06 Msec=2250 True Az=41.01 Ze=94.38 Az status=0009 Ze status=0009 02:09:06 Check angles 02:09:06 SkyScan query 02:09:07 SkyScan query done: ret=0 az=40.995<-2733 ze=73.065<-7129 Statuses=0008 0009 02:09:07 Msec=3000 True Az=40.995 Ze=73.065 Az status=0008 Ze status=0009 02:09:07 Check angles 02:09:07 SkyScan query 02:09:07 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 02:09:07 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 02:09:08 Check angles 02:09:08 SkyScan query 02:09:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:09:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:09:08 Message to Master queued w/err=0: serial=127357 error=0 02:09:13 Received message from Master: op=Filter serial=127358 02:09:13 Color wheel filter change from 0 to 0 02:09:13 FLIGetFilterPos err=0 currentPosition=0 02:09:13 FLIGetStepsRemaining err=0 RemainingSteps=0 02:09:13 Filter is already there-color wheel unchanged 02:09:13 Received message from Master: op=Shutter serial=127359 02:09:13 Shutter LASER close 02:09:14 Received message from Camera: op=State serial=127361 02:09:14 GetSingleValue result=40 Value=cccccccc 02:09:14 SkyScan query 02:09:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:09:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:09:14 Parameters OK 02:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:09:14 Set A/D data flow result=40 02:09:14 Set A/D channel type result=40 02:09:14 Set A/D encoding result=40 02:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:09:14 Set channel filter=0.000000e+000 result=40 02:09:14 Config A/D Result=40 02:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:09:14 Get A/D filter: -9.255963e+061 result=40 02:09:14 Get A/D value=-858993460 result=40 02:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:09:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:09:14 Parameters OK 02:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:09:14 Set A/D data flow result=40 02:09:14 Set A/D channel type result=40 02:09:14 Set A/D encoding result=40 02:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:09:14 Set channel filter=0.000000e+000 result=40 02:09:14 Config A/D Result=40 02:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:09:14 Get A/D filter: -9.255963e+061 result=40 02:09:14 Get A/D value=-858993460 result=40 02:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:09:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:09:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:09:14 Aux= 02:09:14 Message to Camera, serial 127361 queued 02:09:51 Received message from Master: op=PointingHead serial=127374 02:09:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:09:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:09:51 Point started: ret=0 02:09:51 point_skyscan result=0 02:09:52 Check angles 02:09:52 SkyScan query 02:09:53 SkyScan query done: ret=0 az=40.995<-2733 ze=21.63<-10558 Statuses=0008 0009 02:09:53 Msec=0 True Az=40.995 Ze=21.63 Az status=0008 Ze status=0009 02:09:53 Check angles 02:09:53 SkyScan query 02:09:54 SkyScan query done: ret=0 az=40.995<-2733 ze=0.21<-11986 Statuses=0008 0009 02:09:54 Msec=750 True Az=40.995 Ze=0.21 Az status=0008 Ze status=0009 02:09:54 Check angles 02:09:54 SkyScan query 02:09:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.715<-13381 Statuses=0008 0009 02:09:54 Msec=1500 True Az=40.995 Ze=-20.715 Az status=0008 Ze status=0009 02:09:54 Check angles 02:09:54 SkyScan query 02:09:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 02:09:55 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 02:09:55 Check angles 02:09:55 SkyScan query 02:09:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:09:56 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:09:56 Message to Master queued w/err=0: serial=127374 error=0 02:10:01 Received message from Master: op=Filter serial=127375 02:10:01 Color wheel filter change from 0 to 0 02:10:01 FLIGetFilterPos err=0 currentPosition=0 02:10:01 FLIGetStepsRemaining err=0 RemainingSteps=0 02:10:01 Filter is already there-color wheel unchanged 02:10:01 Received message from Master: op=Shutter serial=127376 02:10:01 Shutter LASER close 02:10:01 Received message from Camera: op=State serial=127378 02:10:01 GetSingleValue result=40 Value=cccccccc 02:10:01 SkyScan query 02:10:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:10:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:02 Parameters OK 02:10:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:02 Set A/D data flow result=40 02:10:02 Set A/D channel type result=40 02:10:02 Set A/D encoding result=40 02:10:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:02 Set channel filter=0.000000e+000 result=40 02:10:02 Config A/D Result=40 02:10:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:02 Get A/D filter: -9.255963e+061 result=40 02:10:02 Get A/D value=-858993460 result=40 02:10:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:02 Parameters OK 02:10:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:02 Set A/D data flow result=40 02:10:02 Set A/D channel type result=40 02:10:02 Set A/D encoding result=40 02:10:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:02 Set channel filter=0.000000e+000 result=40 02:10:02 Config A/D Result=40 02:10:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:02 Get A/D filter: -9.255963e+061 result=40 02:10:02 Get A/D value=-858993460 result=40 02:10:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:10:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:10:02 Aux= 02:10:02 Message to Camera, serial 127378 queued 02:10:38 Received message from Master: op=PointingHead serial=127391 02:10:38 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:10:38 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:10:39 Point started: ret=0 02:10:39 point_skyscan result=0 02:10:40 Check angles 02:10:40 SkyScan query 02:10:40 SkyScan query done: ret=0 az=64.05<-4270 ze=-68.415<-16561 Statuses=0009 0009 02:10:40 Msec=0 True Az=64.05 Ze=-68.415 Az status=0009 Ze status=0009 02:10:40 Check angles 02:10:40 SkyScan query 02:10:41 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.43<-17962 Statuses=0009 0009 02:10:41 Msec=750 True Az=81.78 Ze=-89.43 Az status=0009 Ze status=0009 02:10:41 Check angles 02:10:41 SkyScan query 02:10:42 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.385<-19359 Statuses=0009 0009 02:10:42 Msec=1500 True Az=99.165 Ze=-110.385 Az status=0009 Ze status=0009 02:10:42 Check angles 02:10:42 SkyScan query 02:10:42 SkyScan query done: ret=0 az=116.655<-7777 ze=-131.325<-20755 Statuses=0009 0009 02:10:42 Msec=2250 True Az=116.655 Ze=-131.325 Az status=0009 Ze status=0009 02:10:43 Check angles 02:10:43 SkyScan query 02:10:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 02:10:43 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 02:10:43 Check angles 02:10:43 SkyScan query 02:10:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:10:44 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:10:44 Message to Master queued w/err=0: serial=127391 error=0 02:10:49 Received message from Master: op=Filter serial=127392 02:10:49 Color wheel filter change from 0 to 0 02:10:49 FLIGetFilterPos err=0 currentPosition=0 02:10:49 FLIGetStepsRemaining err=0 RemainingSteps=0 02:10:49 Filter is already there-color wheel unchanged 02:10:49 Received message from Master: op=Shutter serial=127393 02:10:49 Shutter LASER close 02:10:49 Received message from Camera: op=State serial=127395 02:10:49 GetSingleValue result=40 Value=cccccccc 02:10:49 SkyScan query 02:10:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:10:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:50 Parameters OK 02:10:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:50 Set A/D data flow result=40 02:10:50 Set A/D channel type result=40 02:10:50 Set A/D encoding result=40 02:10:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:50 Set channel filter=0.000000e+000 result=40 02:10:50 Config A/D Result=40 02:10:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:50 Get A/D filter: -9.255963e+061 result=40 02:10:50 Get A/D value=-858993460 result=40 02:10:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:50 Parameters OK 02:10:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:50 Set A/D data flow result=40 02:10:50 Set A/D channel type result=40 02:10:50 Set A/D encoding result=40 02:10:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:50 Set channel filter=0.000000e+000 result=40 02:10:50 Config A/D Result=40 02:10:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:50 Get A/D filter: -9.255963e+061 result=40 02:10:50 Get A/D value=-858993460 result=40 02:10:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:10:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:10:50 Aux= 02:10:50 Message to Camera, serial 127395 queued 02:11:26 Received message from Master: op=PointingHead serial=127408 02:11:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:11:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:11:27 Point started: ret=0 02:11:27 point_skyscan result=0 02:11:28 Check angles 02:11:28 SkyScan query 02:11:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0008 0009 02:11:28 Msec=0 True Az=112.995 Ze=-171.495 Az status=0008 Ze status=0009 02:11:28 Check angles 02:11:28 SkyScan query 02:11:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:11:29 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:11:29 Message to Master queued w/err=0: serial=127408 error=0 02:11:34 Received message from Master: op=Filter serial=127409 02:11:34 Color wheel filter change from 0 to 0 02:11:34 FLIGetFilterPos err=0 currentPosition=0 02:11:34 FLIGetStepsRemaining err=0 RemainingSteps=0 02:11:34 Filter is already there-color wheel unchanged 02:11:34 Received message from Master: op=Shutter serial=127410 02:11:34 Shutter LASER open 02:11:34 Received message from Camera: op=State serial=127412 02:11:34 GetSingleValue result=40 Value=cccccccc 02:11:34 SkyScan query 02:11:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:11:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:35 Parameters OK 02:11:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:35 Set A/D data flow result=40 02:11:35 Set A/D channel type result=40 02:11:35 Set A/D encoding result=40 02:11:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:35 Set channel filter=0.000000e+000 result=40 02:11:35 Config A/D Result=40 02:11:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:35 Get A/D filter: -9.255963e+061 result=40 02:11:35 Get A/D value=-858993460 result=40 02:11:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:35 Parameters OK 02:11:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:35 Set A/D data flow result=40 02:11:35 Set A/D channel type result=40 02:11:35 Set A/D encoding result=40 02:11:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:35 Set channel filter=0.000000e+000 result=40 02:11:35 Config A/D Result=40 02:11:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:35 Get A/D filter: -9.255963e+061 result=40 02:11:35 Get A/D value=-858993460 result=40 02:11:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:11:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:11:35 Aux= 02:11:35 Message to Camera, serial 127412 queued 02:11:43 Received message from Master: op=Shutter serial=127422 02:11:43 Shutter LASER close 02:11:44 Received message from Master: op=PointingHead serial=127426 02:11:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:11:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:11:44 Point started: ret=0 02:11:44 point_skyscan result=0 02:11:45 Check angles 02:11:45 SkyScan query 02:11:46 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.01<-21534 Statuses=0009 0009 02:11:46 Msec=0 True Az=136.14 Ze=-143.01 Az status=0009 Ze status=0009 02:11:46 Check angles 02:11:46 SkyScan query 02:11:46 SkyScan query done: ret=0 az=153.99<-10266 ze=-121.65<-20110 Statuses=0009 0009 02:11:46 Msec=750 True Az=153.99 Ze=-121.65 Az status=0009 Ze status=0009 02:11:47 Check angles 02:11:47 SkyScan query 02:11:47 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.62<-18708 Statuses=0009 0009 02:11:47 Msec=1500 True Az=171.45 Ze=-100.62 Az status=0009 Ze status=0009 02:11:47 Check angles 02:11:47 SkyScan query 02:11:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.665<-17311 Statuses=0008 0009 02:11:48 Msec=2250 True Az=176.01 Ze=-79.665 Az status=0008 Ze status=0009 02:11:48 Check angles 02:11:48 SkyScan query 02:11:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.29<-15886 Statuses=0008 0009 02:11:49 Msec=3000 True Az=176.01 Ze=-58.29 Az status=0008 Ze status=0009 02:11:49 Check angles 02:11:49 SkyScan query 02:11:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 02:11:49 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 02:11:49 Message to Master queued w/err=0: serial=127426 error=0 02:11:54 Received message from Master: op=Filter serial=127427 02:11:54 Color wheel filter change from 0 to 0 02:11:54 FLIGetFilterPos err=0 currentPosition=0 02:11:54 FLIGetStepsRemaining err=0 RemainingSteps=0 02:11:54 Filter is already there-color wheel unchanged 02:11:55 Received message from Master: op=Shutter serial=127428 02:11:55 Shutter LASER close 02:11:55 Received message from Camera: op=State serial=127430 02:11:55 GetSingleValue result=40 Value=cccccccc 02:11:55 SkyScan query 02:11:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:11:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:55 Parameters OK 02:11:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:55 Set A/D data flow result=40 02:11:55 Set A/D channel type result=40 02:11:55 Set A/D encoding result=40 02:11:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:55 Set channel filter=0.000000e+000 result=40 02:11:55 Config A/D Result=40 02:11:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:55 Get A/D filter: -9.255963e+061 result=40 02:11:55 Get A/D value=-858993460 result=40 02:11:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:55 Parameters OK 02:11:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:55 Set A/D data flow result=40 02:11:55 Set A/D channel type result=40 02:11:55 Set A/D encoding result=40 02:11:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:55 Set channel filter=0.000000e+000 result=40 02:11:55 Config A/D Result=40 02:11:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:55 Get A/D filter: -9.255963e+061 result=40 02:11:55 Get A/D value=-858993460 result=40 02:11:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:11:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:11:55 Aux= 02:11:55 Message to Camera, serial 127430 queued 02:12:32 Received message from Master: op=PointingHead serial=127443 02:12:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:12:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:12:33 Point started: ret=0 02:12:33 point_skyscan result=0 02:12:33 Check angles 02:12:33 SkyScan query 02:12:34 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.96<-13464 Statuses=0009 0009 02:12:34 Msec=0 True Az=153.165 Ze=-21.96 Az status=0009 Ze status=0009 02:12:34 Check angles 02:12:34 SkyScan query 02:12:35 SkyScan query done: ret=0 az=135.72<-9048 ze=-0.96<-12064 Statuses=0009 0009 02:12:35 Msec=750 True Az=135.72 Ze=-0.96 Az status=0009 Ze status=0009 02:12:35 Check angles 02:12:35 SkyScan query 02:12:35 SkyScan query done: ret=0 az=118.215<-7881 ze=19.965<-10669 Statuses=0009 0009 02:12:35 Msec=1500 True Az=118.215 Ze=19.965 Az status=0009 Ze status=0009 02:12:36 Check angles 02:12:36 SkyScan query 02:12:36 SkyScan query done: ret=0 az=100.8<-6720 ze=40.95<-9270 Statuses=0009 0009 02:12:36 Msec=2250 True Az=100.8 Ze=40.95 Az status=0009 Ze status=0009 02:12:36 Check angles 02:12:36 SkyScan query 02:12:37 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 02:12:37 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 02:12:37 Check angles 02:12:37 SkyScan query 02:12:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:12:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:12:38 Message to Master queued w/err=0: serial=127443 error=0 02:12:43 Received message from Master: op=Filter serial=127444 02:12:43 Color wheel filter change from 0 to 0 02:12:43 FLIGetFilterPos err=0 currentPosition=0 02:12:43 FLIGetStepsRemaining err=0 RemainingSteps=0 02:12:43 Filter is already there-color wheel unchanged 02:12:43 Received message from Master: op=Shutter serial=127445 02:12:43 Shutter LASER close 02:12:43 Received message from Camera: op=State serial=127447 02:12:43 GetSingleValue result=40 Value=cccccccc 02:12:43 SkyScan query 02:12:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:12:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:12:43 Parameters OK 02:12:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:12:43 Set A/D data flow result=40 02:12:43 Set A/D channel type result=40 02:12:43 Set A/D encoding result=40 02:12:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:12:43 Set channel filter=0.000000e+000 result=40 02:12:43 Config A/D Result=40 02:12:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:12:43 Get A/D filter: -9.255963e+061 result=40 02:12:43 Get A/D value=-858993460 result=40 02:12:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:12:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:12:43 Parameters OK 02:12:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:12:43 Set A/D data flow result=40 02:12:43 Set A/D channel type result=40 02:12:43 Set A/D encoding result=40 02:12:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:12:43 Set channel filter=0.000000e+000 result=40 02:12:43 Config A/D Result=40 02:12:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:12:43 Get A/D filter: -9.255963e+061 result=40 02:12:43 Get A/D value=-858993460 result=40 02:12:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:12:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:12:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:12:43 Aux= 02:12:43 Message to Camera, serial 127447 queued 02:13:20 Received message from Master: op=PointingHead serial=127460 02:13:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:13:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:13:21 Point started: ret=0 02:13:21 point_skyscan result=0 02:13:22 Check angles 02:13:22 SkyScan query 02:13:22 SkyScan query done: ret=0 az=85.995<-5733 ze=21.42<-10572 Statuses=0008 0009 02:13:22 Msec=0 True Az=85.995 Ze=21.42 Az status=0008 Ze status=0009 02:13:22 Check angles 02:13:22 SkyScan query 02:13:23 SkyScan query done: ret=0 az=85.995<-5733 ze=0.03<-11998 Statuses=0008 0009 02:13:23 Msec=750 True Az=85.995 Ze=0.03 Az status=0008 Ze status=0009 02:13:23 Check angles 02:13:23 SkyScan query 02:13:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.91<-13394 Statuses=0008 0009 02:13:24 Msec=1500 True Az=85.995 Ze=-20.91 Az status=0008 Ze status=0009 02:13:24 Check angles 02:13:24 SkyScan query 02:13:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.88<-14792 Statuses=0008 0009 02:13:24 Msec=2250 True Az=85.995 Ze=-41.88 Az status=0008 Ze status=0009 02:13:25 Check angles 02:13:25 SkyScan query 02:13:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:13:25 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:13:25 Message to Master queued w/err=0: serial=127460 error=0 02:13:30 Received message from Master: op=Filter serial=127461 02:13:30 Color wheel filter change from 0 to 0 02:13:30 FLIGetFilterPos err=0 currentPosition=0 02:13:30 FLIGetStepsRemaining err=0 RemainingSteps=0 02:13:30 Filter is already there-color wheel unchanged 02:13:30 Received message from Master: op=Shutter serial=127462 02:13:30 Shutter LASER close 02:13:30 Received message from Camera: op=State serial=127464 02:13:30 GetSingleValue result=40 Value=cccccccc 02:13:30 SkyScan query 02:13:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:13:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:31 Parameters OK 02:13:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:31 Set A/D data flow result=40 02:13:31 Set A/D channel type result=40 02:13:31 Set A/D encoding result=40 02:13:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:31 Set channel filter=0.000000e+000 result=40 02:13:31 Config A/D Result=40 02:13:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:31 Get A/D filter: -9.255963e+061 result=40 02:13:31 Get A/D value=-858993460 result=40 02:13:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:31 Parameters OK 02:13:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:31 Set A/D data flow result=40 02:13:31 Set A/D channel type result=40 02:13:31 Set A/D encoding result=40 02:13:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:31 Set channel filter=0.000000e+000 result=40 02:13:31 Config A/D Result=40 02:13:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:31 Get A/D filter: -9.255963e+061 result=40 02:13:31 Get A/D value=-858993460 result=40 02:13:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:13:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:13:31 Aux= 02:13:31 Message to Camera, serial 127464 queued 02:14:08 Received message from Master: op=PointingHead serial=127477 02:14:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:14:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:14:09 Point started: ret=0 02:14:09 point_skyscan result=0 02:14:09 Check angles 02:14:09 SkyScan query 02:14:10 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.255<-17417 Statuses=0009 0009 02:14:10 Msec=0 True Az=108.9 Ze=-81.255 Az status=0009 Ze status=0009 02:14:10 Check angles 02:14:10 SkyScan query 02:14:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 02:14:11 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 02:14:11 Check angles 02:14:11 SkyScan query 02:14:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.06<-20204 Statuses=0008 0009 02:14:11 Msec=1500 True Az=112.995 Ze=-123.06 Az status=0008 Ze status=0009 02:14:12 Check angles 02:14:12 SkyScan query 02:14:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.045<-21603 Statuses=0008 0009 02:14:12 Msec=2250 True Az=112.995 Ze=-144.045 Az status=0008 Ze status=0009 02:14:12 Check angles 02:14:12 SkyScan query 02:14:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.97<-22998 Statuses=0008 0009 02:14:13 Msec=3000 True Az=112.995 Ze=-164.97 Az status=0008 Ze status=0009 02:14:13 Check angles 02:14:13 SkyScan query 02:14:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:14:14 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:14:14 Message to Master queued w/err=0: serial=127477 error=0 02:14:19 Received message from Master: op=Filter serial=127478 02:14:19 Color wheel filter change from 0 to 0 02:14:19 FLIGetFilterPos err=0 currentPosition=0 02:14:19 FLIGetStepsRemaining err=0 RemainingSteps=0 02:14:19 Filter is already there-color wheel unchanged 02:14:19 Received message from Master: op=Shutter serial=127479 02:14:19 Shutter LASER open 02:14:19 Received message from Camera: op=State serial=127481 02:14:19 GetSingleValue result=40 Value=cccccccc 02:14:19 SkyScan query 02:14:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:14:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:20 Parameters OK 02:14:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:20 Set A/D data flow result=40 02:14:20 Set A/D channel type result=40 02:14:20 Set A/D encoding result=40 02:14:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:20 Set channel filter=0.000000e+000 result=40 02:14:20 Config A/D Result=40 02:14:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:20 Get A/D filter: -9.255963e+061 result=40 02:14:20 Get A/D value=-858993460 result=40 02:14:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:20 Parameters OK 02:14:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:20 Set A/D data flow result=40 02:14:20 Set A/D channel type result=40 02:14:20 Set A/D encoding result=40 02:14:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:20 Set channel filter=0.000000e+000 result=40 02:14:20 Config A/D Result=40 02:14:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:20 Get A/D filter: -9.255963e+061 result=40 02:14:20 Get A/D value=-858993460 result=40 02:14:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:14:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:14:20 Aux= 02:14:20 Message to Camera, serial 127481 queued 02:14:28 Received message from Master: op=Shutter serial=127491 02:14:28 Shutter LASER close 02:14:28 Received message from Master: op=PointingHead serial=127495 02:14:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:14:28 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:14:29 Point started: ret=0 02:14:29 point_skyscan result=0 02:14:30 Check angles 02:14:30 SkyScan query 02:14:30 SkyScan query done: ret=0 az=89.505<-5967 ze=156.84<-1544 Statuses=0009 0009 02:14:30 Msec=0 True Az=89.505 Ze=156.84 Az status=0009 Ze status=0009 02:14:30 Check angles 02:14:30 SkyScan query 02:14:31 SkyScan query done: ret=0 az=72<-4800 ze=135.78<-2948 Statuses=0009 0009 02:14:31 Msec=750 True Az=72 Ze=135.78 Az status=0009 Ze status=0009 02:14:31 Check angles 02:14:31 SkyScan query 02:14:32 SkyScan query done: ret=0 az=54.735<-3649 ze=114.915<-4339 Statuses=0009 0009 02:14:32 Msec=1500 True Az=54.735 Ze=114.915 Az status=0009 Ze status=0009 02:14:32 Check angles 02:14:32 SkyScan query 02:14:32 SkyScan query done: ret=0 az=41.025<-2735 ze=93.945<-5737 Statuses=0009 0009 02:14:32 Msec=2250 True Az=41.025 Ze=93.945 Az status=0009 Ze status=0009 02:14:33 Check angles 02:14:33 SkyScan query 02:14:33 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 02:14:33 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 02:14:33 Check angles 02:14:33 SkyScan query 02:14:34 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 02:14:34 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 02:14:34 Check angles 02:14:34 SkyScan query 02:14:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:14:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:14:35 Message to Master queued w/err=0: serial=127495 error=0 02:14:40 Received message from Master: op=Filter serial=127496 02:14:40 Color wheel filter change from 0 to 0 02:14:40 FLIGetFilterPos err=0 currentPosition=0 02:14:40 FLIGetStepsRemaining err=0 RemainingSteps=0 02:14:40 Filter is already there-color wheel unchanged 02:14:40 Received message from Master: op=Shutter serial=127497 02:14:40 Shutter LASER close 02:14:40 Received message from Camera: op=State serial=127499 02:14:40 GetSingleValue result=40 Value=cccccccc 02:14:40 SkyScan query 02:14:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:14:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:41 Parameters OK 02:14:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:41 Set A/D data flow result=40 02:14:41 Set A/D channel type result=40 02:14:41 Set A/D encoding result=40 02:14:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:41 Set channel filter=0.000000e+000 result=40 02:14:41 Config A/D Result=40 02:14:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:41 Get A/D filter: -9.255963e+061 result=40 02:14:41 Get A/D value=-858993460 result=40 02:14:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:41 Parameters OK 02:14:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:41 Set A/D data flow result=40 02:14:41 Set A/D channel type result=40 02:14:41 Set A/D encoding result=40 02:14:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:41 Set channel filter=0.000000e+000 result=40 02:14:41 Config A/D Result=40 02:14:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:41 Get A/D filter: -9.255963e+061 result=40 02:14:41 Get A/D value=-858993460 result=40 02:14:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:14:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:14:41 Aux= 02:14:41 Message to Camera, serial 127499 queued 02:15:18 Received message from Master: op=PointingHead serial=127512 02:15:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:15:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:15:18 Point started: ret=0 02:15:18 point_skyscan result=0 02:15:19 Check angles 02:15:19 SkyScan query 02:15:19 SkyScan query done: ret=0 az=40.995<-2733 ze=21.375<-10575 Statuses=0008 0009 02:15:19 Msec=0 True Az=40.995 Ze=21.375 Az status=0008 Ze status=0009 02:15:19 Check angles 02:15:19 SkyScan query 02:15:20 SkyScan query done: ret=0 az=40.995<-2733 ze=0.405<-11973 Statuses=0008 0009 02:15:20 Msec=750 True Az=40.995 Ze=0.405 Az status=0008 Ze status=0009 02:15:20 Check angles 02:15:20 SkyScan query 02:15:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.985<-13399 Statuses=0008 0009 02:15:21 Msec=1500 True Az=40.995 Ze=-20.985 Az status=0008 Ze status=0009 02:15:21 Check angles 02:15:21 SkyScan query 02:15:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 02:15:21 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 02:15:22 Check angles 02:15:22 SkyScan query 02:15:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:15:22 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:15:22 Message to Master queued w/err=0: serial=127512 error=0 02:15:27 Received message from Master: op=Identify serial=127513 02:15:27 Received message from Master: op=Filter serial=127516 02:15:27 Color wheel filter change from 0 to 0 02:15:27 FLIGetFilterPos err=0 currentPosition=0 02:15:27 FLIGetStepsRemaining err=0 RemainingSteps=0 02:15:27 Filter is already there-color wheel unchanged 02:15:27 Received message from Master: op=Shutter serial=127517 02:15:27 Shutter LASER close 02:15:27 Received message from Camera: op=State serial=127519 02:15:27 GetSingleValue result=40 Value=cccccccc 02:15:27 SkyScan query 02:15:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:15:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:15:28 Parameters OK 02:15:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:15:28 Set A/D data flow result=40 02:15:28 Set A/D channel type result=40 02:15:28 Set A/D encoding result=40 02:15:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:15:28 Set channel filter=0.000000e+000 result=40 02:15:28 Config A/D Result=40 02:15:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:15:28 Get A/D filter: -9.255963e+061 result=40 02:15:28 Get A/D value=-858993460 result=40 02:15:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:15:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:15:28 Parameters OK 02:15:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:15:28 Set A/D data flow result=40 02:15:28 Set A/D channel type result=40 [UTC 2018-12-14 02:15:28] 02:15:28 Set A/D encoding result=40 02:15:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:15:28 Set channel filter=0.000000e+000 result=40 02:15:28 Config A/D Result=40 02:15:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:15:28 Get A/D filter: -9.255963e+061 result=40 02:15:28 Get A/D value=-858993460 result=40 02:15:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:15:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:15:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:15:28 Aux= 02:15:28 Message to Camera, serial 127519 queued [UTC 2018-12-14 02:15:52] 02:16:05 Received message from Master: op=PointingHead serial=127532 02:16:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:16:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:16:05 Point started: ret=0 02:16:05 point_skyscan result=0 02:16:06 Check angles 02:16:06 SkyScan query 02:16:07 SkyScan query done: ret=0 az=63.75<-4250 ze=-68.1<-16540 Statuses=0009 0009 02:16:07 Msec=0 True Az=63.75 Ze=-68.1 Az status=0009 Ze status=0009 02:16:07 Check angles 02:16:07 SkyScan query 02:16:07 SkyScan query done: ret=0 az=81.24<-5416 ze=-89.07<-17938 Statuses=0009 0009 02:16:07 Msec=750 True Az=81.24 Ze=-89.07 Az status=0009 Ze status=0009 02:16:08 Check angles 02:16:08 SkyScan query 02:16:08 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.475<-19365 Statuses=0009 0009 02:16:08 Msec=1500 True Az=99.135 Ze=-110.475 Az status=0009 Ze status=0009 02:16:08 Check angles 02:16:08 SkyScan query 02:16:09 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.85<-20790 Statuses=0009 0009 02:16:09 Msec=2250 True Az=116.985 Ze=-131.85 Az status=0009 Ze status=0009 02:16:09 Check angles 02:16:09 SkyScan query 02:16:10 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 02:16:10 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 02:16:10 Check angles 02:16:10 SkyScan query 02:16:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:16:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:16:10 Message to Master queued w/err=0: serial=127532 error=0 02:16:15 Received message from Master: op=Filter serial=127533 02:16:15 Color wheel filter change from 0 to 0 02:16:15 FLIGetFilterPos err=0 currentPosition=0 02:16:15 FLIGetStepsRemaining err=0 RemainingSteps=0 02:16:15 Filter is already there-color wheel unchanged 02:16:16 Received message from Master: op=Shutter serial=127534 02:16:16 Shutter LASER close 02:16:16 Received message from Camera: op=State serial=127536 02:16:16 GetSingleValue result=40 Value=cccccccc 02:16:16 SkyScan query 02:16:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:16:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:16 Parameters OK 02:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:16 Set A/D data flow result=40 02:16:16 Set A/D channel type result=40 02:16:16 Set A/D encoding result=40 02:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:16 Set channel filter=0.000000e+000 result=40 02:16:16 Config A/D Result=40 02:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:16 Get A/D filter: -9.255963e+061 result=40 02:16:16 Get A/D value=-858993460 result=40 02:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:16 Parameters OK 02:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:16 Set A/D data flow result=40 02:16:16 Set A/D channel type result=40 02:16:16 Set A/D encoding result=40 02:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:16 Set channel filter=0.000000e+000 result=40 02:16:16 Config A/D Result=40 02:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:16 Get A/D filter: -9.255963e+061 result=40 02:16:16 Get A/D value=-858993460 result=40 02:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:16:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:16:16 Aux= 02:16:16 Message to Camera, serial 127536 queued 02:16:53 Received message from Master: op=PointingHead serial=127549 02:16:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:16:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:16:53 Point started: ret=0 02:16:53 point_skyscan result=0 02:16:54 Check angles 02:16:54 SkyScan query 02:16:55 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 02:16:55 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 02:16:55 Check angles 02:16:55 SkyScan query 02:16:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:16:56 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:16:56 Message to Master queued w/err=0: serial=127549 error=0 02:17:01 Received message from Master: op=Filter serial=127550 02:17:01 Color wheel filter change from 0 to 0 02:17:01 FLIGetFilterPos err=0 currentPosition=0 02:17:01 FLIGetStepsRemaining err=0 RemainingSteps=0 02:17:01 Filter is already there-color wheel unchanged 02:17:01 Received message from Master: op=Shutter serial=127551 02:17:01 Shutter LASER open 02:17:01 Received message from Camera: op=State serial=127553 02:17:01 GetSingleValue result=40 Value=cccccccc 02:17:01 SkyScan query 02:17:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:17:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:01 Parameters OK 02:17:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:01 Set A/D data flow result=40 02:17:01 Set A/D channel type result=40 02:17:01 Set A/D encoding result=40 02:17:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:01 Set channel filter=0.000000e+000 result=40 02:17:01 Config A/D Result=40 02:17:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:01 Get A/D filter: -9.255963e+061 result=40 02:17:01 Get A/D value=-858993460 result=40 02:17:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:01 Parameters OK 02:17:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:01 Set A/D data flow result=40 02:17:01 Set A/D channel type result=40 02:17:01 Set A/D encoding result=40 02:17:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:01 Set channel filter=0.000000e+000 result=40 02:17:01 Config A/D Result=40 02:17:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:01 Get A/D filter: -9.255963e+061 result=40 02:17:01 Get A/D value=-858993460 result=40 02:17:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:17:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:17:01 Aux= 02:17:01 Message to Camera, serial 127553 queued 02:17:10 Received message from Master: op=Shutter serial=127563 02:17:10 Shutter LASER close 02:17:11 Received message from Master: op=PointingHead serial=127567 02:17:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:17:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:17:11 Point started: ret=0 02:17:11 point_skyscan result=0 02:17:12 Check angles 02:17:12 SkyScan query 02:17:12 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.535<-21569 Statuses=0009 0009 02:17:12 Msec=0 True Az=135.765 Ze=-143.535 Az status=0009 Ze status=0009 02:17:12 Check angles 02:17:12 SkyScan query 02:17:13 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.58<-20172 Statuses=0009 0009 02:17:13 Msec=750 True Az=153.24 Ze=-122.58 Az status=0009 Ze status=0009 02:17:13 Check angles 02:17:13 SkyScan query 02:17:14 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.685<-18779 Statuses=0009 0009 02:17:14 Msec=1500 True Az=170.775 Ze=-101.685 Az status=0009 Ze status=0009 02:17:14 Check angles 02:17:14 SkyScan query 02:17:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.64<-17376 Statuses=0008 0009 02:17:14 Msec=2250 True Az=176.01 Ze=-80.64 Az status=0008 Ze status=0009 02:17:15 Check angles 02:17:15 SkyScan query 02:17:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.715<-15981 Statuses=0008 0009 02:17:15 Msec=3000 True Az=176.01 Ze=-59.715 Az status=0008 Ze status=0009 02:17:15 Check angles 02:17:15 SkyScan query 02:17:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 02:17:16 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 02:17:16 Message to Master queued w/err=0: serial=127567 error=0 02:17:21 Received message from Master: op=Filter serial=127568 02:17:21 Color wheel filter change from 0 to 0 02:17:21 FLIGetFilterPos err=0 currentPosition=0 02:17:21 FLIGetStepsRemaining err=0 RemainingSteps=0 02:17:21 Filter is already there-color wheel unchanged 02:17:21 Received message from Master: op=Shutter serial=127569 02:17:21 Shutter LASER close 02:17:21 Received message from Camera: op=State serial=127571 02:17:21 GetSingleValue result=40 Value=cccccccc 02:17:21 SkyScan query 02:17:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:17:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:22 Parameters OK 02:17:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:22 Set A/D data flow result=40 02:17:22 Set A/D channel type result=40 02:17:22 Set A/D encoding result=40 02:17:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:22 Set channel filter=0.000000e+000 result=40 02:17:22 Config A/D Result=40 02:17:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:22 Get A/D filter: -9.255963e+061 result=40 02:17:22 Get A/D value=-858993460 result=40 02:17:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:22 Parameters OK 02:17:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:22 Set A/D data flow result=40 02:17:22 Set A/D channel type result=40 02:17:22 Set A/D encoding result=40 02:17:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:22 Set channel filter=0.000000e+000 result=40 02:17:22 Config A/D Result=40 02:17:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:22 Get A/D filter: -9.255963e+061 result=40 02:17:22 Get A/D value=-858993460 result=40 02:17:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:17:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:17:22 Aux= 02:17:22 Message to Camera, serial 127571 queued 02:17:59 Received message from Master: op=PointingHead serial=127584 02:17:59 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:17:59 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:17:59 Point started: ret=0 02:17:59 point_skyscan result=0 02:18:00 Check angles 02:18:00 SkyScan query 02:18:00 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.05<-13470 Statuses=0009 0009 02:18:00 Msec=0 True Az=153.21 Ze=-22.05 Az status=0009 Ze status=0009 02:18:01 Check angles 02:18:01 SkyScan query 02:18:01 SkyScan query done: ret=0 az=135.33<-9022 ze=-0.645<-12043 Statuses=0009 0009 02:18:01 Msec=750 True Az=135.33 Ze=-0.645 Az status=0009 Ze status=0009 02:18:01 Check angles 02:18:01 SkyScan query 02:18:02 SkyScan query done: ret=0 az=117.9<-7860 ze=20.325<-10645 Statuses=0009 0009 02:18:02 Msec=1500 True Az=117.9 Ze=20.325 Az status=0009 Ze status=0009 02:18:02 Check angles 02:18:02 SkyScan query 02:18:03 SkyScan query done: ret=0 az=100.125<-6675 ze=41.715<-9219 Statuses=0009 0009 02:18:03 Msec=2250 True Az=100.125 Ze=41.715 Az status=0009 Ze status=0009 02:18:03 Check angles 02:18:03 SkyScan query 02:18:03 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 02:18:03 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 02:18:04 Check angles 02:18:04 SkyScan query 02:18:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:18:04 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:18:04 Message to Master queued w/err=0: serial=127584 error=0 02:18:09 Received message from Master: op=Filter serial=127585 02:18:09 Color wheel filter change from 0 to 0 02:18:09 FLIGetFilterPos err=0 currentPosition=0 02:18:09 FLIGetStepsRemaining err=0 RemainingSteps=0 02:18:09 Filter is already there-color wheel unchanged 02:18:09 Received message from Master: op=Shutter serial=127586 02:18:09 Shutter LASER close 02:18:09 Received message from Camera: op=State serial=127588 02:18:09 GetSingleValue result=40 Value=cccccccc 02:18:09 SkyScan query 02:18:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:18:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:10 Parameters OK 02:18:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:10 Set A/D data flow result=40 02:18:10 Set A/D channel type result=40 02:18:10 Set A/D encoding result=40 02:18:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:10 Set channel filter=0.000000e+000 result=40 02:18:10 Config A/D Result=40 02:18:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:10 Get A/D filter: -9.255963e+061 result=40 02:18:10 Get A/D value=-858993460 result=40 02:18:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:10 Parameters OK 02:18:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:10 Set A/D data flow result=40 02:18:10 Set A/D channel type result=40 02:18:10 Set A/D encoding result=40 02:18:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:10 Set channel filter=0.000000e+000 result=40 02:18:10 Config A/D Result=40 02:18:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:10 Get A/D filter: -9.255963e+061 result=40 02:18:10 Get A/D value=-858993460 result=40 02:18:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:18:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:18:10 Aux= 02:18:10 Message to Camera, serial 127588 queued 02:18:47 Received message from Master: op=PointingHead serial=127601 02:18:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:18:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:18:47 Point started: ret=0 02:18:47 point_skyscan result=0 02:18:48 Check angles 02:18:48 SkyScan query 02:18:49 SkyScan query done: ret=0 az=85.995<-5733 ze=21.255<-10583 Statuses=0008 0009 02:18:49 Msec=0 True Az=85.995 Ze=21.255 Az status=0008 Ze status=0009 02:18:49 Check angles 02:18:49 SkyScan query 02:18:49 SkyScan query done: ret=0 az=85.995<-5733 ze=0.3<-11980 Statuses=0008 0009 02:18:49 Msec=750 True Az=85.995 Ze=0.3 Az status=0008 Ze status=0009 02:18:49 Check angles 02:18:49 SkyScan query 02:18:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.655<-13377 Statuses=0008 0009 02:18:50 Msec=1500 True Az=85.995 Ze=-20.655 Az status=0008 Ze status=0009 02:18:50 Check angles 02:18:50 SkyScan query 02:18:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.03<-14802 Statuses=0008 0009 02:18:51 Msec=2250 True Az=85.995 Ze=-42.03 Az status=0008 Ze status=0009 02:18:51 Check angles 02:18:51 SkyScan query 02:18:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:18:52 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:18:52 Message to Master queued w/err=0: serial=127601 error=0 02:18:57 Received message from Master: op=Filter serial=127602 02:18:57 Color wheel filter change from 0 to 0 02:18:57 FLIGetFilterPos err=0 currentPosition=0 02:18:57 FLIGetStepsRemaining err=0 RemainingSteps=0 02:18:57 Filter is already there-color wheel unchanged 02:18:57 Received message from Master: op=Shutter serial=127603 02:18:57 Shutter LASER close 02:18:57 Received message from Camera: op=State serial=127605 02:18:57 GetSingleValue result=40 Value=cccccccc 02:18:57 SkyScan query 02:18:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:18:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:57 Parameters OK 02:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:57 Set A/D data flow result=40 02:18:57 Set A/D channel type result=40 02:18:57 Set A/D encoding result=40 02:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:57 Set channel filter=0.000000e+000 result=40 02:18:57 Config A/D Result=40 02:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:57 Get A/D filter: -9.255963e+061 result=40 02:18:57 Get A/D value=-858993460 result=40 02:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:57 Parameters OK 02:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:57 Set A/D data flow result=40 02:18:57 Set A/D channel type result=40 02:18:57 Set A/D encoding result=40 02:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:57 Set channel filter=0.000000e+000 result=40 02:18:57 Config A/D Result=40 02:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:57 Get A/D filter: -9.255963e+061 result=40 02:18:57 Get A/D value=-858993460 result=40 02:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:18:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:18:57 Aux= 02:18:57 Message to Camera, serial 127605 queued 02:19:34 Received message from Master: op=PointingHead serial=127618 02:19:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:19:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:19:35 Point started: ret=0 02:19:35 point_skyscan result=0 02:19:35 Check angles 02:19:35 SkyScan query 02:19:36 SkyScan query done: ret=0 az=109.05<-7270 ze=-81.33<-17422 Statuses=0009 0009 02:19:36 Msec=0 True Az=109.05 Ze=-81.33 Az status=0009 Ze status=0009 02:19:36 Check angles 02:19:36 SkyScan query 02:19:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 02:19:37 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 02:19:37 Check angles 02:19:37 SkyScan query 02:19:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 02:19:37 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 02:19:38 Check angles 02:19:38 SkyScan query 02:19:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 02:19:38 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 02:19:38 Check angles 02:19:38 SkyScan query 02:19:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.57<-23038 Statuses=0008 0009 02:19:39 Msec=3000 True Az=112.995 Ze=-165.57 Az status=0008 Ze status=0009 02:19:39 Check angles 02:19:39 SkyScan query 02:19:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:19:40 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:19:40 Message to Master queued w/err=0: serial=127618 error=0 02:19:45 Received message from Master: op=Filter serial=127619 02:19:45 Color wheel filter change from 0 to 0 02:19:45 FLIGetFilterPos err=0 currentPosition=0 02:19:45 FLIGetStepsRemaining err=0 RemainingSteps=0 02:19:45 Filter is already there-color wheel unchanged 02:19:45 Received message from Master: op=Shutter serial=127620 02:19:45 Shutter LASER open 02:19:45 Received message from Camera: op=State serial=127622 02:19:45 GetSingleValue result=40 Value=cccccccc 02:19:45 SkyScan query 02:19:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:19:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:46 Parameters OK 02:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:46 Set A/D data flow result=40 02:19:46 Set A/D channel type result=40 02:19:46 Set A/D encoding result=40 02:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:46 Set channel filter=0.000000e+000 result=40 02:19:46 Config A/D Result=40 02:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:46 Get A/D filter: -9.255963e+061 result=40 02:19:46 Get A/D value=-858993460 result=40 02:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:46 Parameters OK 02:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:46 Set A/D data flow result=40 02:19:46 Set A/D channel type result=40 02:19:46 Set A/D encoding result=40 02:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:46 Set channel filter=0.000000e+000 result=40 02:19:46 Config A/D Result=40 02:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:46 Get A/D filter: -9.255963e+061 result=40 02:19:46 Get A/D value=-858993460 result=40 02:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:19:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:19:46 Aux= 02:19:46 Message to Camera, serial 127622 queued 02:19:54 Received message from Master: op=Shutter serial=127632 02:19:54 Shutter LASER close 02:19:54 Received message from Master: op=PointingHead serial=127636 02:19:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:19:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:19:55 Point started: ret=0 02:19:55 point_skyscan result=0 02:19:56 Check angles 02:19:56 SkyScan query 02:19:56 SkyScan query done: ret=0 az=89.565<-5971 ze=156.825<-1545 Statuses=0009 0009 02:19:56 Msec=0 True Az=89.565 Ze=156.825 Az status=0009 Ze status=0009 02:19:56 Check angles 02:19:56 SkyScan query 02:19:57 SkyScan query done: ret=0 az=72.045<-4803 ze=135.855<-2943 Statuses=0009 0009 02:19:57 Msec=750 True Az=72.045 Ze=135.855 Az status=0009 Ze status=0009 02:19:57 Check angles 02:19:57 SkyScan query 02:19:58 SkyScan query done: ret=0 az=54.75<-3650 ze=114.87<-4342 Statuses=0009 0009 02:19:58 Msec=1500 True Az=54.75 Ze=114.87 Az status=0009 Ze status=0009 02:19:58 Check angles 02:19:58 SkyScan query 02:19:58 SkyScan query done: ret=0 az=41.025<-2735 ze=93.915<-5739 Statuses=0009 0009 02:19:58 Msec=2250 True Az=41.025 Ze=93.915 Az status=0009 Ze status=0009 02:19:59 Check angles 02:19:59 SkyScan query 02:19:59 SkyScan query done: ret=0 az=40.995<-2733 ze=72.945<-7137 Statuses=0008 0009 02:19:59 Msec=3000 True Az=40.995 Ze=72.945 Az status=0008 Ze status=0009 02:19:59 Check angles 02:19:59 SkyScan query 02:20:00 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 02:20:00 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 02:20:00 Check angles 02:20:00 SkyScan query 02:20:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:20:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:20:01 Message to Master queued w/err=0: serial=127636 error=0 02:20:06 Received message from Master: op=Filter serial=127637 02:20:06 Color wheel filter change from 0 to 0 02:20:06 FLIGetFilterPos err=0 currentPosition=0 02:20:06 FLIGetStepsRemaining err=0 RemainingSteps=0 02:20:06 Filter is already there-color wheel unchanged 02:20:06 Received message from Master: op=Shutter serial=127638 02:20:06 Shutter LASER close 02:20:06 Received message from Camera: op=State serial=127640 02:20:06 GetSingleValue result=40 Value=cccccccc 02:20:06 SkyScan query 02:20:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:20:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:07 Parameters OK 02:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:07 Set A/D data flow result=40 02:20:07 Set A/D channel type result=40 02:20:07 Set A/D encoding result=40 02:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:07 Set channel filter=0.000000e+000 result=40 02:20:07 Config A/D Result=40 02:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:07 Get A/D filter: -9.255963e+061 result=40 02:20:07 Get A/D value=-858993460 result=40 02:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:07 Parameters OK 02:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:07 Set A/D data flow result=40 02:20:07 Set A/D channel type result=40 02:20:07 Set A/D encoding result=40 02:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:07 Set channel filter=0.000000e+000 result=40 02:20:07 Config A/D Result=40 02:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:07 Get A/D filter: -9.255963e+061 result=40 02:20:07 Get A/D value=-858993460 result=40 02:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:20:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:20:07 Aux= 02:20:07 Message to Camera, serial 127640 queued 02:20:43 Received message from Master: op=PointingHead serial=127652 02:20:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:20:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:20:43 Point started: ret=0 02:20:43 point_skyscan result=0 02:20:44 Check angles 02:20:44 SkyScan query 02:20:44 SkyScan query done: ret=0 az=40.995<-2733 ze=21.57<-10562 Statuses=0008 0009 02:20:44 Msec=0 True Az=40.995 Ze=21.57 Az status=0008 Ze status=0009 02:20:44 Check angles 02:20:44 SkyScan query 02:20:45 SkyScan query done: ret=0 az=40.995<-2733 ze=0.585<-11961 Statuses=0008 0009 02:20:45 Msec=750 True Az=40.995 Ze=0.585 Az status=0008 Ze status=0009 02:20:45 Check angles 02:20:45 SkyScan query 02:20:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.34<-13356 Statuses=0008 0009 02:20:46 Msec=1500 True Az=40.995 Ze=-20.34 Az status=0008 Ze status=0009 02:20:46 Check angles 02:20:46 SkyScan query 02:20:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 02:20:47 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 02:20:47 Check angles 02:20:47 SkyScan query 02:20:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:20:47 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:20:47 Message to Master queued w/err=0: serial=127652 error=0 02:20:52 Received message from Master: op=Filter serial=127653 02:20:52 Color wheel filter change from 0 to 0 02:20:52 FLIGetFilterPos err=0 currentPosition=0 02:20:52 FLIGetStepsRemaining err=0 RemainingSteps=0 02:20:52 Filter is already there-color wheel unchanged 02:20:52 Received message from Master: op=Shutter serial=127654 02:20:52 Shutter LASER close 02:20:52 Received message from Camera: op=State serial=127656 02:20:52 GetSingleValue result=40 Value=cccccccc 02:20:52 SkyScan query 02:20:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:20:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:53 Parameters OK 02:20:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:53 Set A/D data flow result=40 02:20:53 Set A/D channel type result=40 02:20:53 Set A/D encoding result=40 02:20:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:53 Set channel filter=0.000000e+000 result=40 02:20:53 Config A/D Result=40 02:20:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:53 Get A/D filter: -9.255963e+061 result=40 02:20:53 Get A/D value=-858993460 result=40 02:20:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:53 Parameters OK 02:20:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:53 Set A/D data flow result=40 02:20:53 Set A/D channel type result=40 02:20:53 Set A/D encoding result=40 02:20:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:53 Set channel filter=0.000000e+000 result=40 02:20:53 Config A/D Result=40 02:20:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:53 Get A/D filter: -9.255963e+061 result=40 02:20:53 Get A/D value=-858993460 result=40 02:20:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:20:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:20:53 Aux= 02:20:53 Message to Camera, serial 127656 queued 02:21:30 Received message from Master: op=PointingHead serial=127669 02:21:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:21:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:21:30 Point started: ret=0 02:21:30 point_skyscan result=0 02:21:31 Check angles 02:21:31 SkyScan query 02:21:32 SkyScan query done: ret=0 az=64.035<-4269 ze=-68.4<-16560 Statuses=0009 0009 02:21:32 Msec=0 True Az=64.035 Ze=-68.4 Az status=0009 Ze status=0009 02:21:32 Check angles 02:21:32 SkyScan query 02:21:32 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.415<-17961 Statuses=0009 0009 02:21:32 Msec=750 True Az=81.54 Ze=-89.415 Az status=0009 Ze status=0009 02:21:32 Check angles 02:21:32 SkyScan query 02:21:33 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.355<-19357 Statuses=0009 0009 02:21:33 Msec=1500 True Az=99.18 Ze=-110.355 Az status=0009 Ze status=0009 02:21:33 Check angles 02:21:33 SkyScan query 02:21:34 SkyScan query done: ret=0 az=116.445<-7763 ze=-131.295<-20753 Statuses=0009 0009 02:21:34 Msec=2250 True Az=116.445 Ze=-131.295 Az status=0009 Ze status=0009 02:21:34 Check angles 02:21:34 SkyScan query 02:21:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 02:21:35 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 02:21:35 Check angles 02:21:35 SkyScan query 02:21:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:21:35 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:21:35 Message to Master queued w/err=0: serial=127669 error=0 02:21:40 Received message from Master: op=Filter serial=127670 02:21:40 Color wheel filter change from 0 to 0 02:21:40 FLIGetFilterPos err=0 currentPosition=0 02:21:40 FLIGetStepsRemaining err=0 RemainingSteps=0 02:21:40 Filter is already there-color wheel unchanged 02:21:40 Received message from Master: op=Shutter serial=127671 02:21:40 Shutter LASER close 02:21:41 Received message from Camera: op=State serial=127673 02:21:41 GetSingleValue result=40 Value=cccccccc 02:21:41 SkyScan query 02:21:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:21:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:41 Parameters OK 02:21:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:41 Set A/D data flow result=40 02:21:41 Set A/D channel type result=40 02:21:41 Set A/D encoding result=40 02:21:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:41 Set channel filter=0.000000e+000 result=40 02:21:41 Config A/D Result=40 02:21:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:41 Get A/D filter: -9.255963e+061 result=40 02:21:41 Get A/D value=-858993460 result=40 02:21:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:41 Parameters OK 02:21:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:41 Set A/D data flow result=40 02:21:41 Set A/D channel type result=40 02:21:41 Set A/D encoding result=40 02:21:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:41 Set channel filter=0.000000e+000 result=40 02:21:41 Config A/D Result=40 02:21:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:41 Get A/D filter: -9.255963e+061 result=40 02:21:41 Get A/D value=-858993460 result=40 02:21:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:21:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:21:41 Aux= 02:21:41 Message to Camera, serial 127673 queued 02:22:18 Received message from Master: op=PointingHead serial=127686 02:22:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:22:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:22:18 Point started: ret=0 02:22:18 point_skyscan result=0 02:22:19 Check angles 02:22:19 SkyScan query 02:22:20 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 02:22:20 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 02:22:20 Check angles 02:22:20 SkyScan query 02:22:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:22:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:22:20 Message to Master queued w/err=0: serial=127686 error=0 02:22:25 Received message from Master: op=Filter serial=127687 02:22:25 Color wheel filter change from 0 to 0 02:22:25 FLIGetFilterPos err=0 currentPosition=0 02:22:25 FLIGetStepsRemaining err=0 RemainingSteps=0 02:22:25 Filter is already there-color wheel unchanged 02:22:26 Received message from Master: op=Shutter serial=127688 02:22:26 Shutter LASER open 02:22:26 Received message from Camera: op=State serial=127690 02:22:26 GetSingleValue result=40 Value=cccccccc 02:22:26 SkyScan query 02:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:22:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:26 Parameters OK 02:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:26 Set A/D data flow result=40 02:22:26 Set A/D channel type result=40 02:22:26 Set A/D encoding result=40 02:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:26 Set channel filter=0.000000e+000 result=40 02:22:26 Config A/D Result=40 02:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:26 Get A/D filter: -9.255963e+061 result=40 02:22:26 Get A/D value=-858993460 result=40 02:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:26 Parameters OK 02:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:26 Set A/D data flow result=40 02:22:26 Set A/D channel type result=40 02:22:26 Set A/D encoding result=40 02:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:26 Set channel filter=0.000000e+000 result=40 02:22:26 Config A/D Result=40 02:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:26 Get A/D filter: -9.255963e+061 result=40 02:22:26 Get A/D value=-858993460 result=40 02:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:22:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:22:26 Aux= 02:22:26 Message to Camera, serial 127690 queued 02:22:35 Received message from Master: op=Shutter serial=127700 02:22:35 Shutter LASER close 02:22:35 Received message from Master: op=PointingHead serial=127704 02:22:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:22:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:22:36 Point started: ret=0 02:22:36 point_skyscan result=0 02:22:36 Check angles 02:22:36 SkyScan query 02:22:37 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.415<-21561 Statuses=0009 0009 02:22:37 Msec=0 True Az=135.81 Ze=-143.415 Az status=0009 Ze status=0009 02:22:37 Check angles 02:22:37 SkyScan query 02:22:38 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.445<-20163 Statuses=0009 0009 02:22:38 Msec=750 True Az=153.36 Ze=-122.445 Az status=0009 Ze status=0009 02:22:38 Check angles 02:22:38 SkyScan query 02:22:38 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.55<-18770 Statuses=0009 0009 02:22:38 Msec=1500 True Az=170.805 Ze=-101.55 Az status=0009 Ze status=0009 02:22:39 Check angles 02:22:39 SkyScan query 02:22:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.535<-17369 Statuses=0008 0009 02:22:39 Msec=2250 True Az=176.01 Ze=-80.535 Az status=0008 Ze status=0009 02:22:39 Check angles 02:22:39 SkyScan query 02:22:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.61<-15974 Statuses=0008 0009 02:22:40 Msec=3000 True Az=176.01 Ze=-59.61 Az status=0008 Ze status=0009 02:22:40 Check angles 02:22:40 SkyScan query 02:22:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:22:41 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:22:41 Message to Master queued w/err=0: serial=127704 error=0 02:22:46 Received message from Master: op=Filter serial=127705 02:22:46 Color wheel filter change from 0 to 0 02:22:46 FLIGetFilterPos err=0 currentPosition=0 02:22:46 FLIGetStepsRemaining err=0 RemainingSteps=0 02:22:46 Filter is already there-color wheel unchanged 02:22:46 Received message from Master: op=Shutter serial=127706 02:22:46 Shutter LASER close 02:22:46 Received message from Camera: op=State serial=127708 02:22:46 GetSingleValue result=40 Value=cccccccc 02:22:46 SkyScan query 02:22:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:22:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:47 Parameters OK 02:22:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:47 Set A/D data flow result=40 02:22:47 Set A/D channel type result=40 02:22:47 Set A/D encoding result=40 02:22:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:47 Set channel filter=0.000000e+000 result=40 02:22:47 Config A/D Result=40 02:22:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:47 Get A/D filter: -9.255963e+061 result=40 02:22:47 Get A/D value=-858993460 result=40 02:22:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:47 Parameters OK 02:22:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:47 Set A/D data flow result=40 02:22:47 Set A/D channel type result=40 02:22:47 Set A/D encoding result=40 02:22:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:47 Set channel filter=0.000000e+000 result=40 02:22:47 Config A/D Result=40 02:22:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:47 Get A/D filter: -9.255963e+061 result=40 02:22:47 Get A/D value=-858993460 result=40 02:22:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:22:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:22:47 Aux= 02:22:47 Message to Camera, serial 127708 queued 02:23:23 Received message from Master: op=PointingHead serial=127721 02:23:23 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:23:23 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:23:24 Point started: ret=0 02:23:24 point_skyscan result=0 02:23:25 Check angles 02:23:25 SkyScan query 02:23:25 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.465<-13431 Statuses=0009 0009 02:23:25 Msec=0 True Az=152.76 Ze=-21.465 Az status=0009 Ze status=0009 02:23:25 Check angles 02:23:25 SkyScan query 02:23:26 SkyScan query done: ret=0 az=135.33<-9022 ze=-0.51<-12034 Statuses=0009 0009 02:23:26 Msec=750 True Az=135.33 Ze=-0.51 Az status=0009 Ze status=0009 02:23:26 Check angles 02:23:26 SkyScan query 02:23:27 SkyScan query done: ret=0 az=117.42<-7828 ze=20.91<-10606 Statuses=0009 0009 02:23:27 Msec=1500 True Az=117.42 Ze=20.91 Az status=0009 Ze status=0009 02:23:27 Check angles 02:23:27 SkyScan query 02:23:27 SkyScan query done: ret=0 az=99.69<-6646 ze=42.255<-9183 Statuses=0009 0009 02:23:27 Msec=2250 True Az=99.69 Ze=42.255 Az status=0009 Ze status=0009 02:23:28 Check angles 02:23:28 SkyScan query 02:23:28 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 02:23:28 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 02:23:28 Check angles 02:23:28 SkyScan query 02:23:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:23:29 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:23:29 Message to Master queued w/err=0: serial=127721 error=0 02:23:34 Received message from Master: op=Filter serial=127722 02:23:34 Color wheel filter change from 0 to 0 02:23:34 FLIGetFilterPos err=0 currentPosition=0 02:23:34 FLIGetStepsRemaining err=0 RemainingSteps=0 02:23:34 Filter is already there-color wheel unchanged 02:23:34 Received message from Master: op=Shutter serial=127723 02:23:34 Shutter LASER close 02:23:34 Received message from Camera: op=State serial=127725 02:23:34 GetSingleValue result=40 Value=cccccccc 02:23:34 SkyScan query 02:23:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:23:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:23:35 Parameters OK 02:23:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:23:35 Set A/D data flow result=40 02:23:35 Set A/D channel type result=40 02:23:35 Set A/D encoding result=40 02:23:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:23:35 Set channel filter=0.000000e+000 result=40 02:23:35 Config A/D Result=40 02:23:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:23:35 Get A/D filter: -9.255963e+061 result=40 02:23:35 Get A/D value=-858993460 result=40 02:23:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:23:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:23:35 Parameters OK 02:23:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:23:35 Set A/D data flow result=40 02:23:35 Set A/D channel type result=40 02:23:35 Set A/D encoding result=40 02:23:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:23:35 Set channel filter=0.000000e+000 result=40 02:23:35 Config A/D Result=40 02:23:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:23:35 Get A/D filter: -9.255963e+061 result=40 02:23:35 Get A/D value=-858993460 result=40 02:23:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:23:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:23:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:23:35 Aux= 02:23:35 Message to Camera, serial 127725 queued 02:24:12 Received message from Master: op=PointingHead serial=127738 02:24:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:24:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:24:12 Point started: ret=0 02:24:12 point_skyscan result=0 02:24:13 Check angles 02:24:13 SkyScan query 02:24:13 SkyScan query done: ret=0 az=85.995<-5733 ze=21.87<-10542 Statuses=0008 0009 02:24:13 Msec=0 True Az=85.995 Ze=21.87 Az status=0008 Ze status=0009 02:24:14 Check angles 02:24:14 SkyScan query 02:24:14 SkyScan query done: ret=0 az=85.995<-5733 ze=0.915<-11939 Statuses=0008 0009 02:24:14 Msec=750 True Az=85.995 Ze=0.915 Az status=0008 Ze status=0009 02:24:14 Check angles 02:24:14 SkyScan query 02:24:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.04<-13336 Statuses=0008 0009 02:24:15 Msec=1500 True Az=85.995 Ze=-20.04 Az status=0008 Ze status=0009 02:24:15 Check angles 02:24:15 SkyScan query 02:24:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.98<-14732 Statuses=0008 0009 02:24:16 Msec=2250 True Az=85.995 Ze=-40.98 Az status=0008 Ze status=0009 02:24:16 Check angles 02:24:16 SkyScan query 02:24:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:24:16 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:24:16 Message to Master queued w/err=0: serial=127738 error=0 02:24:21 Received message from Master: op=Filter serial=127739 02:24:21 Color wheel filter change from 0 to 0 02:24:21 FLIGetFilterPos err=0 currentPosition=0 02:24:21 FLIGetStepsRemaining err=0 RemainingSteps=0 02:24:21 Filter is already there-color wheel unchanged 02:24:22 Received message from Master: op=Shutter serial=127740 02:24:22 Shutter LASER close 02:24:22 Received message from Camera: op=State serial=127742 02:24:22 GetSingleValue result=40 Value=cccccccc 02:24:22 SkyScan query 02:24:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:24:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:22 Parameters OK 02:24:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:22 Set A/D data flow result=40 02:24:22 Set A/D channel type result=40 02:24:22 Set A/D encoding result=40 02:24:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:22 Set channel filter=0.000000e+000 result=40 02:24:22 Config A/D Result=40 02:24:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:22 Get A/D filter: -9.255963e+061 result=40 02:24:22 Get A/D value=-858993460 result=40 02:24:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:22 Parameters OK 02:24:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:22 Set A/D data flow result=40 02:24:22 Set A/D channel type result=40 02:24:22 Set A/D encoding result=40 02:24:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:22 Set channel filter=0.000000e+000 result=40 02:24:22 Config A/D Result=40 02:24:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:22 Get A/D filter: -9.255963e+061 result=40 02:24:22 Get A/D value=-858993460 result=40 02:24:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:24:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:24:22 Aux= 02:24:22 Message to Camera, serial 127742 queued 02:24:59 Received message from Master: op=PointingHead serial=127755 02:24:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:24:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:24:59 Point started: ret=0 02:24:59 point_skyscan result=0 02:25:00 Check angles 02:25:00 SkyScan query 02:25:01 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.075<-17405 Statuses=0009 0009 02:25:01 Msec=0 True Az=108.81 Ze=-81.075 Az status=0009 Ze status=0009 02:25:01 Check angles 02:25:01 SkyScan query 02:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 02:25:02 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 02:25:02 Check angles 02:25:02 SkyScan query 02:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.97<-20198 Statuses=0008 0009 02:25:02 Msec=1500 True Az=112.995 Ze=-122.97 Az status=0008 Ze status=0009 02:25:02 Check angles 02:25:02 SkyScan query 02:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.94<-21596 Statuses=0008 0009 02:25:03 Msec=2250 True Az=112.995 Ze=-143.94 Az status=0008 Ze status=0009 02:25:03 Check angles 02:25:03 SkyScan query 02:25:04 SkyScan query done: ret=0 az=112.98<-7532 ze=-164.88<-22992 Statuses=0008 0009 02:25:04 Msec=3000 True Az=112.98 Ze=-164.88 Az status=0008 Ze status=0009 02:25:04 Check angles 02:25:04 SkyScan query 02:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:25:05 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:25:05 Message to Master queued w/err=0: serial=127755 error=0 02:25:10 Received message from Master: op=Filter serial=127756 02:25:10 Color wheel filter change from 0 to 0 02:25:10 FLIGetFilterPos err=0 currentPosition=0 02:25:10 FLIGetStepsRemaining err=0 RemainingSteps=0 02:25:10 Filter is already there-color wheel unchanged 02:25:10 Received message from Master: op=Shutter serial=127757 02:25:10 Shutter LASER open 02:25:10 Received message from Camera: op=State serial=127759 02:25:10 GetSingleValue result=40 Value=cccccccc 02:25:10 SkyScan query 02:25:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:25:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:11 Parameters OK 02:25:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:11 Set A/D data flow result=40 02:25:11 Set A/D channel type result=40 02:25:11 Set A/D encoding result=40 02:25:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:11 Set channel filter=0.000000e+000 result=40 02:25:11 Config A/D Result=40 02:25:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:11 Get A/D filter: -9.255963e+061 result=40 02:25:11 Get A/D value=-858993460 result=40 02:25:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:11 Parameters OK 02:25:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:11 Set A/D data flow result=40 02:25:11 Set A/D channel type result=40 02:25:11 Set A/D encoding result=40 02:25:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:11 Set channel filter=0.000000e+000 result=40 02:25:11 Config A/D Result=40 02:25:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:11 Get A/D filter: -9.255963e+061 result=40 02:25:11 Get A/D value=-858993460 result=40 02:25:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:25:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:25:11 Aux= 02:25:11 Message to Camera, serial 127759 queued 02:25:19 Received message from Master: op=Shutter serial=127769 02:25:19 Shutter LASER close 02:25:19 Received message from Master: op=PointingHead serial=127773 02:25:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:25:19 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:25:20 Point started: ret=0 02:25:20 point_skyscan result=0 02:25:20 Check angles 02:25:20 SkyScan query 02:25:21 SkyScan query done: ret=0 az=89.58<-5972 ze=156.87<-1542 Statuses=0009 0009 02:25:21 Msec=0 True Az=89.58 Ze=156.87 Az status=0009 Ze status=0009 02:25:21 Check angles 02:25:21 SkyScan query 02:25:22 SkyScan query done: ret=0 az=71.715<-4781 ze=135.465<-2969 Statuses=0009 0009 02:25:22 Msec=750 True Az=71.715 Ze=135.465 Az status=0009 Ze status=0009 02:25:22 Check angles 02:25:22 SkyScan query 02:25:23 SkyScan query done: ret=0 az=54.435<-3629 ze=114.48<-4368 Statuses=0009 0009 02:25:23 Msec=1500 True Az=54.435 Ze=114.48 Az status=0009 Ze status=0009 02:25:23 Check angles 02:25:23 SkyScan query 02:25:23 SkyScan query done: ret=0 az=40.995<-2733 ze=93.555<-5763 Statuses=0009 0009 02:25:23 Msec=2250 True Az=40.995 Ze=93.555 Az status=0009 Ze status=0009 02:25:23 Check angles 02:25:23 SkyScan query 02:25:24 SkyScan query done: ret=0 az=40.995<-2733 ze=72.555<-7163 Statuses=0008 0009 02:25:24 Msec=3000 True Az=40.995 Ze=72.555 Az status=0008 Ze status=0009 02:25:24 Check angles 02:25:24 SkyScan query 02:25:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 02:25:25 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 02:25:25 Check angles 02:25:25 SkyScan query 02:25:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:25:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:25:26 Message to Master queued w/err=0: serial=127773 error=0 02:25:31 Received message from Master: op=Filter serial=127774 02:25:31 Color wheel filter change from 0 to 0 02:25:31 FLIGetFilterPos err=0 currentPosition=0 [UTC 2018-12-14 02:25:31] 02:25:31 FLIGetStepsRemaining err=0 RemainingSteps=0 02:25:31 Filter is already there-color wheel unchanged 02:25:31 Received message from Master: op=Shutter serial=127775 02:25:31 Shutter LASER close 02:25:31 Received message from Camera: op=State serial=127777 02:25:31 GetSingleValue result=40 Value=cccccccc 02:25:31 SkyScan query 02:25:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:25:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:32 Parameters OK 02:25:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:32 Set A/D data flow result=40 02:25:32 Set A/D channel type result=40 02:25:32 Set A/D encoding result=40 02:25:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:32 Set channel filter=0.000000e+000 result=40 02:25:32 Config A/D Result=40 02:25:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:32 Get A/D filter: -9.255963e+061 result=40 02:25:32 Get A/D value=-858993460 result=40 02:25:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:32 Parameters OK 02:25:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:32 Set A/D data flow result=40 02:25:32 Set A/D channel type result=40 02:25:32 Set A/D encoding result=40 02:25:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:32 Set channel filter=0.000000e+000 result=40 02:25:32 Config A/D Result=40 02:25:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:32 Get A/D filter: -9.255963e+061 result=40 02:25:32 Get A/D value=-858993460 result=40 02:25:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:25:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:25:32 Aux= 02:25:32 Message to Camera, serial 127777 queued 02:26:09 Received message from Master: op=PointingHead serial=127790 02:26:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:26:09 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:26:09 Point started: ret=0 02:26:09 point_skyscan result=0 02:26:10 Check angles 02:26:10 SkyScan query 02:26:10 SkyScan query done: ret=0 az=40.995<-2733 ze=21.465<-10569 Statuses=0008 0009 02:26:10 Msec=0 True Az=40.995 Ze=21.465 Az status=0008 Ze status=0009 02:26:10 Check angles 02:26:10 SkyScan query 02:26:11 SkyScan query done: ret=0 az=40.995<-2733 ze=0.435<-11971 Statuses=0008 0009 02:26:11 Msec=750 True Az=40.995 Ze=0.435 Az status=0008 Ze status=0009 02:26:11 Check angles 02:26:11 SkyScan query 02:26:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.46<-13364 Statuses=0008 0009 02:26:12 Msec=1500 True Az=40.995 Ze=-20.46 Az status=0008 Ze status=0009 02:26:12 Check angles 02:26:12 SkyScan query 02:26:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 02:26:12 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 02:26:13 Check angles 02:26:13 SkyScan query 02:26:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:26:13 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:26:13 Message to Master queued w/err=0: serial=127790 error=0 02:26:18 Received message from Master: op=Filter serial=127791 02:26:18 Color wheel filter change from 0 to 0 02:26:18 FLIGetFilterPos err=0 currentPosition=0 02:26:18 FLIGetStepsRemaining err=0 RemainingSteps=0 02:26:18 Filter is already there-color wheel unchanged 02:26:18 Received message from Master: op=Shutter serial=127792 02:26:18 Shutter LASER close 02:26:18 Received message from Camera: op=State serial=127794 02:26:18 GetSingleValue result=40 Value=cccccccc 02:26:18 SkyScan query 02:26:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:26:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:19 Parameters OK 02:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:19 Set A/D data flow result=40 02:26:19 Set A/D channel type result=40 02:26:19 Set A/D encoding result=40 02:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:19 Set channel filter=0.000000e+000 result=40 02:26:19 Config A/D Result=40 02:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:19 Get A/D filter: -9.255963e+061 result=40 02:26:19 Get A/D value=-858993460 result=40 02:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:19 Parameters OK 02:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:19 Set A/D data flow result=40 02:26:19 Set A/D channel type result=40 02:26:19 Set A/D encoding result=40 02:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:19 Set channel filter=0.000000e+000 result=40 02:26:19 Config A/D Result=40 02:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:19 Get A/D filter: -9.255963e+061 result=40 02:26:19 Get A/D value=-858993460 result=40 02:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:26:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:26:19 Aux= 02:26:19 Message to Camera, serial 127794 queued 02:26:56 Received message from Master: op=PointingHead serial=127807 02:26:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:26:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:26:56 Point started: ret=0 02:26:56 point_skyscan result=0 02:26:57 Check angles 02:26:57 SkyScan query 02:26:58 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.07<-16538 Statuses=0009 0009 02:26:58 Msec=0 True Az=63.825 Ze=-68.07 Az status=0009 Ze status=0009 02:26:58 Check angles 02:26:58 SkyScan query 02:26:58 SkyScan query done: ret=0 az=81.18<-5412 ze=-89.055<-17937 Statuses=0009 0009 02:26:58 Msec=750 True Az=81.18 Ze=-89.055 Az status=0009 Ze status=0009 02:26:58 Check angles 02:26:58 SkyScan query 02:26:59 SkyScan query done: ret=0 az=98.7<-6580 ze=-109.995<-19333 Statuses=0009 0009 02:26:59 Msec=1500 True Az=98.7 Ze=-109.995 Az status=0009 Ze status=0009 02:26:59 Check angles 02:26:59 SkyScan query 02:27:00 SkyScan query done: ret=0 az=116.265<-7751 ze=-130.965<-20731 Statuses=0009 0009 02:27:00 Msec=2250 True Az=116.265 Ze=-130.965 Az status=0009 Ze status=0009 02:27:00 Check angles 02:27:00 SkyScan query 02:27:01 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.555<-21437 Statuses=0009 0008 02:27:01 Msec=3000 True Az=131.085 Ze=-141.555 Az status=0009 Ze status=0008 02:27:01 Check angles 02:27:01 SkyScan query 02:27:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 02:27:01 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 02:27:01 Message to Master queued w/err=0: serial=127807 error=0 02:27:06 Received message from Master: op=Filter serial=127808 02:27:06 Color wheel filter change from 0 to 0 02:27:06 FLIGetFilterPos err=0 currentPosition=0 02:27:06 FLIGetStepsRemaining err=0 RemainingSteps=0 02:27:06 Filter is already there-color wheel unchanged 02:27:06 Received message from Master: op=Shutter serial=127809 02:27:06 Shutter LASER close 02:27:06 Received message from Camera: op=State serial=127811 02:27:06 GetSingleValue result=40 Value=cccccccc 02:27:06 SkyScan query 02:27:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:27:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:07 Parameters OK 02:27:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:07 Set A/D data flow result=40 02:27:07 Set A/D channel type result=40 02:27:07 Set A/D encoding result=40 02:27:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:07 Set channel filter=0.000000e+000 result=40 02:27:07 Config A/D Result=40 02:27:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:07 Get A/D filter: -9.255963e+061 result=40 02:27:07 Get A/D value=-858993460 result=40 02:27:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:07 Parameters OK 02:27:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:07 Set A/D data flow result=40 02:27:07 Set A/D channel type result=40 02:27:07 Set A/D encoding result=40 02:27:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:07 Set channel filter=0.000000e+000 result=40 02:27:07 Config A/D Result=40 02:27:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:07 Get A/D filter: -9.255963e+061 result=40 02:27:07 Get A/D value=-858993460 result=40 02:27:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:27:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:27:07 Aux= 02:27:07 Message to Camera, serial 127811 queued 02:27:44 Received message from Master: op=PointingHead serial=127824 02:27:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:27:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:27:44 Point started: ret=0 02:27:44 point_skyscan result=0 02:27:45 Check angles 02:27:45 SkyScan query 02:27:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 02:27:46 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 02:27:46 Check angles 02:27:46 SkyScan query 02:27:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:27:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:27:46 Message to Master queued w/err=0: serial=127824 error=0 02:27:51 Received message from Master: op=Filter serial=127825 02:27:51 Color wheel filter change from 0 to 0 02:27:51 FLIGetFilterPos err=0 currentPosition=0 02:27:51 FLIGetStepsRemaining err=0 RemainingSteps=0 02:27:51 Filter is already there-color wheel unchanged 02:27:51 Received message from Master: op=Shutter serial=127826 02:27:51 Shutter LASER open 02:27:52 Received message from Camera: op=State serial=127828 02:27:52 GetSingleValue result=40 Value=cccccccc 02:27:52 SkyScan query 02:27:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:27:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:52 Parameters OK 02:27:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:52 Set A/D data flow result=40 02:27:52 Set A/D channel type result=40 02:27:52 Set A/D encoding result=40 02:27:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:52 Set channel filter=0.000000e+000 result=40 02:27:52 Config A/D Result=40 02:27:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:52 Get A/D filter: -9.255963e+061 result=40 02:27:52 Get A/D value=-858993460 result=40 02:27:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:52 Parameters OK 02:27:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:52 Set A/D data flow result=40 02:27:52 Set A/D channel type result=40 02:27:52 Set A/D encoding result=40 02:27:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:52 Set channel filter=0.000000e+000 result=40 02:27:52 Config A/D Result=40 02:27:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:52 Get A/D filter: -9.255963e+061 result=40 02:27:52 Get A/D value=-858993460 result=40 02:27:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:27:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:27:52 Aux= 02:27:52 Message to Camera, serial 127828 queued 02:28:01 Received message from Master: op=Shutter serial=127838 02:28:01 Shutter LASER close 02:28:01 Received message from Master: op=PointingHead serial=127842 02:28:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:28:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:28:02 Point started: ret=0 02:28:02 point_skyscan result=0 02:28:02 Check angles 02:28:02 SkyScan query 02:28:03 SkyScan query done: ret=0 az=136.5<-9100 ze=-142.59<-21506 Statuses=0009 0009 02:28:03 Msec=0 True Az=136.5 Ze=-142.59 Az status=0009 Ze status=0009 02:28:03 Check angles 02:28:03 SkyScan query 02:28:04 SkyScan query done: ret=0 az=154.02<-10268 ze=-121.74<-20116 Statuses=0009 0009 02:28:04 Msec=750 True Az=154.02 Ze=-121.74 Az status=0009 Ze status=0009 02:28:04 Check angles 02:28:04 SkyScan query 02:28:04 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.74<-18716 Statuses=0009 0009 02:28:04 Msec=1500 True Az=171.48 Ze=-100.74 Az status=0009 Ze status=0009 02:28:05 Check angles 02:28:05 SkyScan query 02:28:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.875<-17325 Statuses=0008 0009 02:28:05 Msec=2250 True Az=176.01 Ze=-79.875 Az status=0008 Ze status=0009 02:28:05 Check angles 02:28:05 SkyScan query 02:28:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.845<-15923 Statuses=0008 0009 02:28:06 Msec=3000 True Az=176.01 Ze=-58.845 Az status=0008 Ze status=0009 02:28:06 Check angles 02:28:06 SkyScan query 02:28:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 02:28:07 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 02:28:07 Message to Master queued w/err=0: serial=127842 error=0 02:28:12 Received message from Master: op=Filter serial=127843 02:28:12 Color wheel filter change from 0 to 0 02:28:12 FLIGetFilterPos err=0 currentPosition=0 02:28:12 FLIGetStepsRemaining err=0 RemainingSteps=0 02:28:12 Filter is already there-color wheel unchanged 02:28:12 Received message from Master: op=Shutter serial=127844 02:28:12 Shutter LASER close 02:28:12 Received message from Camera: op=State serial=127846 02:28:12 GetSingleValue result=40 Value=cccccccc 02:28:12 SkyScan query 02:28:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:28:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:13 Parameters OK 02:28:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:13 Set A/D data flow result=40 02:28:13 Set A/D channel type result=40 02:28:13 Set A/D encoding result=40 02:28:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:13 Set channel filter=0.000000e+000 result=40 02:28:13 Config A/D Result=40 02:28:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:13 Get A/D filter: -9.255963e+061 result=40 02:28:13 Get A/D value=-858993460 result=40 02:28:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:13 Parameters OK 02:28:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:13 Set A/D data flow result=40 02:28:13 Set A/D channel type result=40 02:28:13 Set A/D encoding result=40 02:28:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:13 Set channel filter=0.000000e+000 result=40 02:28:13 Config A/D Result=40 02:28:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:13 Get A/D filter: -9.255963e+061 result=40 02:28:13 Get A/D value=-858993460 result=40 02:28:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:28:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:28:13 Aux= 02:28:13 Message to Camera, serial 127846 queued 02:28:50 Received message from Master: op=PointingHead serial=127859 02:28:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:28:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:28:50 Point started: ret=0 02:28:50 point_skyscan result=0 02:28:51 Check angles 02:28:51 SkyScan query 02:28:51 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.42<-13428 Statuses=0009 0009 02:28:51 Msec=0 True Az=152.565 Ze=-21.42 Az status=0009 Ze status=0009 02:28:51 Check angles 02:28:51 SkyScan query 02:28:52 SkyScan query done: ret=0 az=134.595<-8973 ze=-0.045<-12003 Statuses=0009 0009 02:28:52 Msec=750 True Az=134.595 Ze=-0.045 Az status=0009 Ze status=0009 02:28:52 Check angles 02:28:52 SkyScan query 02:28:53 SkyScan query done: ret=0 az=117.27<-7818 ze=20.955<-10603 Statuses=0009 0009 02:28:53 Msec=1500 True Az=117.27 Ze=20.955 Az status=0009 Ze status=0009 02:28:53 Check angles 02:28:53 SkyScan query 02:28:53 SkyScan query done: ret=0 az=99.87<-6658 ze=41.85<-9210 Statuses=0009 0009 02:28:53 Msec=2250 True Az=99.87 Ze=41.85 Az status=0009 Ze status=0009 02:28:54 Check angles 02:28:54 SkyScan query 02:28:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 02:28:54 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 02:28:54 Check angles 02:28:54 SkyScan query 02:28:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:28:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:28:55 Message to Master queued w/err=0: serial=127859 error=0 02:29:00 Received message from Master: op=Filter serial=127860 02:29:00 Color wheel filter change from 0 to 0 02:29:00 FLIGetFilterPos err=0 currentPosition=0 02:29:00 FLIGetStepsRemaining err=0 RemainingSteps=0 02:29:00 Filter is already there-color wheel unchanged 02:29:00 Received message from Master: op=Shutter serial=127861 02:29:00 Shutter LASER close 02:29:00 Received message from Camera: op=State serial=127863 02:29:00 GetSingleValue result=40 Value=cccccccc 02:29:00 SkyScan query 02:29:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:29:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:29:01 Parameters OK 02:29:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:29:01 Set A/D data flow result=40 02:29:01 Set A/D channel type result=40 02:29:01 Set A/D encoding result=40 02:29:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:29:01 Set channel filter=0.000000e+000 result=40 02:29:01 Config A/D Result=40 02:29:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:29:01 Get A/D filter: -9.255963e+061 result=40 02:29:01 Get A/D value=-858993460 result=40 02:29:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:29:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:29:01 Parameters OK 02:29:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:29:01 Set A/D data flow result=40 02:29:01 Set A/D channel type result=40 02:29:01 Set A/D encoding result=40 02:29:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:29:01 Set channel filter=0.000000e+000 result=40 02:29:01 Config A/D Result=40 02:29:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:29:01 Get A/D filter: -9.255963e+061 result=40 02:29:01 Get A/D value=-858993460 result=40 02:29:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:29:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:29:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:29:01 Aux= 02:29:01 Message to Camera, serial 127863 queued 02:29:38 Received message from Master: op=PointingHead serial=127876 02:29:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:29:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:29:38 Point started: ret=0 02:29:38 point_skyscan result=0 02:29:39 Check angles 02:29:39 SkyScan query 02:29:39 SkyScan query done: ret=0 az=85.995<-5733 ze=21.18<-10588 Statuses=0008 0009 02:29:39 Msec=0 True Az=85.995 Ze=21.18 Az status=0008 Ze status=0009 02:29:40 Check angles 02:29:40 SkyScan query 02:29:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-0.225<-12015 Statuses=0008 0009 02:29:40 Msec=750 True Az=85.995 Ze=-0.225 Az status=0008 Ze status=0009 02:29:40 Check angles 02:29:40 SkyScan query 02:29:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.24<-13416 Statuses=0008 0009 02:29:41 Msec=1500 True Az=85.995 Ze=-21.24 Az status=0008 Ze status=0009 02:29:41 Check angles 02:29:41 SkyScan query 02:29:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.12<-14808 Statuses=0008 0009 02:29:42 Msec=2250 True Az=85.995 Ze=-42.12 Az status=0008 Ze status=0009 02:29:42 Check angles 02:29:42 SkyScan query 02:29:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:29:42 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:29:42 Message to Master queued w/err=0: serial=127876 error=0 02:29:47 Received message from Master: op=Filter serial=127877 02:29:47 Color wheel filter change from 0 to 0 02:29:47 FLIGetFilterPos err=0 currentPosition=0 02:29:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:29:47 Filter is already there-color wheel unchanged 02:29:48 Received message from Master: op=Shutter serial=127878 02:29:48 Shutter LASER close 02:29:48 Received message from Camera: op=State serial=127880 02:29:48 GetSingleValue result=40 Value=cccccccc 02:29:48 SkyScan query 02:29:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:29:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:29:48 Parameters OK 02:29:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:29:48 Set A/D data flow result=40 02:29:48 Set A/D channel type result=40 02:29:48 Set A/D encoding result=40 02:29:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:29:48 Set channel filter=0.000000e+000 result=40 02:29:48 Config A/D Result=40 02:29:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:29:48 Get A/D filter: -9.255963e+061 result=40 02:29:48 Get A/D value=-858993460 result=40 02:29:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:29:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:29:48 Parameters OK 02:29:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:29:48 Set A/D data flow result=40 02:29:48 Set A/D channel type result=40 02:29:48 Set A/D encoding result=40 02:29:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:29:48 Set channel filter=0.000000e+000 result=40 02:29:48 Config A/D Result=40 02:29:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:29:48 Get A/D filter: -9.255963e+061 result=40 02:29:48 Get A/D value=-858993460 result=40 02:29:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:29:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:29:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:29:48 Aux= 02:29:48 Message to Camera, serial 127880 queued 02:30:25 Received message from Master: op=PointingHead serial=127893 02:30:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:30:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:30:25 Point started: ret=0 02:30:25 point_skyscan result=0 02:30:26 Check angles 02:30:26 SkyScan query 02:30:27 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.405<-17427 Statuses=0009 0009 02:30:27 Msec=0 True Az=109.14 Ze=-81.405 Az status=0009 Ze status=0009 02:30:27 Check angles 02:30:27 SkyScan query 02:30:27 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.375<-18825 Statuses=0008 0009 02:30:27 Msec=750 True Az=112.98 Ze=-102.375 Az status=0008 Ze status=0009 02:30:28 Check angles 02:30:28 SkyScan query 02:30:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.75<-20250 Statuses=0008 0009 02:30:28 Msec=1500 True Az=112.995 Ze=-123.75 Az status=0008 Ze status=0009 02:30:28 Check angles 02:30:28 SkyScan query 02:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.705<-21647 Statuses=0008 0009 02:30:29 Msec=2250 True Az=112.995 Ze=-144.705 Az status=0008 Ze status=0009 02:30:29 Check angles 02:30:29 SkyScan query 02:30:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 02:30:30 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 02:30:30 Check angles 02:30:30 SkyScan query 02:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:30:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:30:31 Message to Master queued w/err=0: serial=127893 error=0 02:30:36 Received message from Master: op=Filter serial=127894 02:30:36 Color wheel filter change from 0 to 0 02:30:36 FLIGetFilterPos err=0 currentPosition=0 02:30:36 FLIGetStepsRemaining err=0 RemainingSteps=0 02:30:36 Filter is already there-color wheel unchanged 02:30:36 Received message from Master: op=Shutter serial=127895 02:30:36 Shutter LASER open 02:30:36 Received message from Camera: op=State serial=127897 02:30:36 GetSingleValue result=40 Value=cccccccc 02:30:36 SkyScan query 02:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:30:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:36 Parameters OK 02:30:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:36 Set A/D data flow result=40 02:30:36 Set A/D channel type result=40 02:30:36 Set A/D encoding result=40 02:30:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:36 Set channel filter=0.000000e+000 result=40 02:30:36 Config A/D Result=40 02:30:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:36 Get A/D filter: -9.255963e+061 result=40 02:30:36 Get A/D value=-858993460 result=40 02:30:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:36 Parameters OK 02:30:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:36 Set A/D data flow result=40 02:30:36 Set A/D channel type result=40 02:30:36 Set A/D encoding result=40 02:30:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:36 Set channel filter=0.000000e+000 result=40 02:30:36 Config A/D Result=40 02:30:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:36 Get A/D filter: -9.255963e+061 result=40 02:30:36 Get A/D value=-858993460 result=40 02:30:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:30:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:30:36 Aux= 02:30:36 Message to Camera, serial 127897 queued 02:30:45 Received message from Master: op=Shutter serial=127907 02:30:45 Shutter LASER close 02:30:45 Received message from Master: op=PointingHead serial=127911 02:30:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:30:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:30:46 Point started: ret=0 02:30:46 point_skyscan result=0 02:30:46 Check angles 02:30:46 SkyScan query 02:30:47 SkyScan query done: ret=0 az=89.61<-5974 ze=156.975<-1535 Statuses=0009 0009 02:30:47 Msec=0 True Az=89.61 Ze=156.975 Az status=0009 Ze status=0009 02:30:47 Check angles 02:30:47 SkyScan query 02:30:48 SkyScan query done: ret=0 az=72.21<-4814 ze=136.005<-2933 Statuses=0009 0009 02:30:48 Msec=750 True Az=72.21 Ze=136.005 Az status=0009 Ze status=0009 02:30:48 Check angles 02:30:48 SkyScan query 02:30:49 SkyScan query done: ret=0 az=54.825<-3655 ze=115.08<-4328 Statuses=0009 0009 02:30:49 Msec=1500 True Az=54.825 Ze=115.08 Az status=0009 Ze status=0009 02:30:49 Check angles 02:30:49 SkyScan query 02:30:49 SkyScan query done: ret=0 az=41.025<-2735 ze=94.08<-5728 Statuses=0009 0009 02:30:49 Msec=2250 True Az=41.025 Ze=94.08 Az status=0009 Ze status=0009 02:30:49 Check angles 02:30:49 SkyScan query 02:30:50 SkyScan query done: ret=0 az=40.995<-2733 ze=73.14<-7124 Statuses=0008 0009 02:30:50 Msec=3000 True Az=40.995 Ze=73.14 Az status=0008 Ze status=0009 02:30:50 Check angles 02:30:50 SkyScan query 02:30:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 02:30:51 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 02:30:51 Check angles 02:30:51 SkyScan query 02:30:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:30:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:30:52 Message to Master queued w/err=0: serial=127911 error=0 02:30:57 Received message from Master: op=Filter serial=127912 02:30:57 Color wheel filter change from 0 to 0 02:30:57 FLIGetFilterPos err=0 currentPosition=0 02:30:57 FLIGetStepsRemaining err=0 RemainingSteps=0 02:30:57 Filter is already there-color wheel unchanged 02:30:57 Received message from Master: op=Shutter serial=127913 02:30:57 Shutter LASER close 02:30:57 Received message from Camera: op=State serial=127915 02:30:57 GetSingleValue result=40 Value=cccccccc 02:30:57 SkyScan query 02:30:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:30:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:57 Parameters OK 02:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:57 Set A/D data flow result=40 02:30:57 Set A/D channel type result=40 02:30:57 Set A/D encoding result=40 02:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:57 Set channel filter=0.000000e+000 result=40 02:30:57 Config A/D Result=40 02:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:57 Get A/D filter: -9.255963e+061 result=40 02:30:57 Get A/D value=-858993460 result=40 02:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:57 Parameters OK 02:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:57 Set A/D data flow result=40 02:30:57 Set A/D channel type result=40 02:30:57 Set A/D encoding result=40 02:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:57 Set channel filter=0.000000e+000 result=40 02:30:57 Config A/D Result=40 02:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:57 Get A/D filter: -9.255963e+061 result=40 02:30:57 Get A/D value=-858993460 result=40 02:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:30:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:30:57 Aux= 02:30:57 Message to Camera, serial 127915 queued 02:31:34 Received message from Master: op=PointingHead serial=127928 02:31:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:31:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:31:35 Point started: ret=0 02:31:35 point_skyscan result=0 02:31:35 Check angles 02:31:35 SkyScan query 02:31:36 SkyScan query done: ret=0 az=40.995<-2733 ze=21.84<-10544 Statuses=0008 0009 02:31:36 Msec=0 True Az=40.995 Ze=21.84 Az status=0008 Ze status=0009 02:31:36 Check angles 02:31:36 SkyScan query 02:31:37 SkyScan query done: ret=0 az=40.98<-2732 ze=0.885<-11941 Statuses=0008 0009 02:31:37 Msec=750 True Az=40.98 Ze=0.885 Az status=0008 Ze status=0009 02:31:37 Check angles 02:31:37 SkyScan query 02:31:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.505<-13367 Statuses=0008 0009 02:31:38 Msec=1500 True Az=40.995 Ze=-20.505 Az status=0008 Ze status=0009 02:31:38 Check angles 02:31:38 SkyScan query 02:31:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 02:31:38 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 02:31:38 Check angles 02:31:38 SkyScan query 02:31:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:31:39 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:31:39 Message to Master queued w/err=0: serial=127928 error=0 02:31:44 Received message from Master: op=Filter serial=127929 02:31:44 Color wheel filter change from 0 to 0 02:31:44 FLIGetFilterPos err=0 currentPosition=0 02:31:44 FLIGetStepsRemaining err=0 RemainingSteps=0 02:31:44 Filter is already there-color wheel unchanged 02:31:44 Received message from Master: op=Shutter serial=127930 02:31:44 Shutter LASER close 02:31:44 Received message from Camera: op=State serial=127932 02:31:44 GetSingleValue result=40 Value=cccccccc 02:31:44 SkyScan query 02:31:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:31:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:31:45 Parameters OK 02:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:31:45 Set A/D data flow result=40 02:31:45 Set A/D channel type result=40 02:31:45 Set A/D encoding result=40 02:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:31:45 Set channel filter=0.000000e+000 result=40 02:31:45 Config A/D Result=40 02:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:31:45 Get A/D filter: -9.255963e+061 result=40 02:31:45 Get A/D value=-858993460 result=40 02:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:31:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:31:45 Parameters OK 02:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:31:45 Set A/D data flow result=40 02:31:45 Set A/D channel type result=40 02:31:45 Set A/D encoding result=40 02:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:31:45 Set channel filter=0.000000e+000 result=40 02:31:45 Config A/D Result=40 02:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:31:45 Get A/D filter: -9.255963e+061 result=40 02:31:45 Get A/D value=-858993460 result=40 02:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:31:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:31:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:31:45 Aux= 02:31:45 Message to Camera, serial 127932 queued 02:32:22 Received message from Master: op=PointingHead serial=127945 02:32:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:32:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:32:22 Point started: ret=0 02:32:22 point_skyscan result=0 02:32:23 Check angles 02:32:23 SkyScan query 02:32:23 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.175<-16545 Statuses=0009 0009 02:32:23 Msec=0 True Az=63.855 Ze=-68.175 Az status=0009 Ze status=0009 02:32:24 Check angles 02:32:24 SkyScan query 02:32:24 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.61<-17974 Statuses=0009 0009 02:32:24 Msec=750 True Az=81.795 Ze=-89.61 Az status=0009 Ze status=0009 02:32:24 Check angles 02:32:24 SkyScan query 02:32:25 SkyScan query done: ret=0 az=99.24<-6616 ze=-110.58<-19372 Statuses=0009 0009 02:32:25 Msec=1500 True Az=99.24 Ze=-110.58 Az status=0009 Ze status=0009 02:32:25 Check angles 02:32:25 SkyScan query 02:32:26 SkyScan query done: ret=0 az=116.655<-7777 ze=-131.505<-20767 Statuses=0009 0009 02:32:26 Msec=2250 True Az=116.655 Ze=-131.505 Az status=0009 Ze status=0009 02:32:26 Check angles 02:32:26 SkyScan query 02:32:26 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 02:32:26 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 02:32:27 Check angles 02:32:27 SkyScan query 02:32:27 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:32:27 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:32:27 Message to Master queued w/err=0: serial=127945 error=0 02:32:32 Received message from Master: op=Filter serial=127946 02:32:32 Color wheel filter change from 0 to 0 02:32:32 FLIGetFilterPos err=0 currentPosition=0 02:32:32 FLIGetStepsRemaining err=0 RemainingSteps=0 02:32:32 Filter is already there-color wheel unchanged 02:32:32 Received message from Master: op=Shutter serial=127947 02:32:32 Shutter LASER close 02:32:32 Received message from Camera: op=State serial=127949 02:32:32 GetSingleValue result=40 Value=cccccccc 02:32:32 SkyScan query 02:32:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:32:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:32:33 Parameters OK 02:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:32:33 Set A/D data flow result=40 02:32:33 Set A/D channel type result=40 02:32:33 Set A/D encoding result=40 02:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:32:33 Set channel filter=0.000000e+000 result=40 02:32:33 Config A/D Result=40 02:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:32:33 Get A/D filter: -9.255963e+061 result=40 02:32:33 Get A/D value=-858993460 result=40 02:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:32:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:32:33 Parameters OK 02:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:32:33 Set A/D data flow result=40 02:32:33 Set A/D channel type result=40 02:32:33 Set A/D encoding result=40 02:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:32:33 Set channel filter=0.000000e+000 result=40 02:32:33 Config A/D Result=40 02:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:32:33 Get A/D filter: -9.255963e+061 result=40 02:32:33 Get A/D value=-858993460 result=40 02:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:32:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:32:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:32:33 Aux= 02:32:33 Message to Camera, serial 127949 queued 02:33:10 Received message from Master: op=PointingHead serial=127962 02:33:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:33:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:33:10 Point started: ret=0 02:33:10 point_skyscan result=0 02:33:11 Check angles 02:33:11 SkyScan query 02:33:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 02:33:11 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 02:33:12 Check angles 02:33:12 SkyScan query 02:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:33:12 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:33:12 Message to Master queued w/err=0: serial=127962 error=0 02:33:17 Received message from Master: op=Filter serial=127963 02:33:17 Color wheel filter change from 0 to 0 02:33:17 FLIGetFilterPos err=0 currentPosition=0 02:33:17 FLIGetStepsRemaining err=0 RemainingSteps=0 02:33:17 Filter is already there-color wheel unchanged 02:33:17 Received message from Master: op=Shutter serial=127964 02:33:17 Shutter LASER open 02:33:18 Received message from Camera: op=State serial=127966 02:33:18 GetSingleValue result=40 Value=cccccccc 02:33:18 SkyScan query 02:33:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:33:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:18 Parameters OK 02:33:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:18 Set A/D data flow result=40 02:33:18 Set A/D channel type result=40 02:33:18 Set A/D encoding result=40 02:33:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:18 Set channel filter=0.000000e+000 result=40 02:33:18 Config A/D Result=40 02:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:18 Get A/D filter: -9.255963e+061 result=40 02:33:18 Get A/D value=-858993460 result=40 02:33:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:18 Parameters OK 02:33:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:18 Set A/D data flow result=40 02:33:18 Set A/D channel type result=40 02:33:18 Set A/D encoding result=40 02:33:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:18 Set channel filter=0.000000e+000 result=40 02:33:18 Config A/D Result=40 02:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:18 Get A/D filter: -9.255963e+061 result=40 02:33:18 Get A/D value=-858993460 result=40 02:33:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:33:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:33:18 Aux= 02:33:18 Message to Camera, serial 127966 queued 02:33:26 Received message from Master: op=Shutter serial=127975 02:33:26 Shutter LASER close 02:33:26 Received message from Master: op=PointingHead serial=127979 02:33:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:33:26 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:33:27 Point started: ret=0 02:33:27 point_skyscan result=0 02:33:27 Check angles 02:33:27 SkyScan query 02:33:28 SkyScan query done: ret=0 az=135.795<-9053 ze=-143.37<-21558 Statuses=0009 0009 02:33:28 Msec=0 True Az=135.795 Ze=-143.37 Az status=0009 Ze status=0009 02:33:28 Check angles 02:33:28 SkyScan query 02:33:29 SkyScan query done: ret=0 az=153.66<-10244 ze=-121.95<-20130 Statuses=0009 0009 02:33:29 Msec=750 True Az=153.66 Ze=-121.95 Az status=0009 Ze status=0009 02:33:29 Check angles 02:33:29 SkyScan query 02:33:29 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.515<-18701 Statuses=0009 0009 02:33:29 Msec=1500 True Az=171.525 Ze=-100.515 Az status=0009 Ze status=0009 02:33:30 Check angles 02:33:30 SkyScan query 02:33:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.65<-17310 Statuses=0008 0009 02:33:30 Msec=2250 True Az=176.01 Ze=-79.65 Az status=0008 Ze status=0009 02:33:30 Check angles 02:33:30 SkyScan query 02:33:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.635<-15909 Statuses=0008 0009 02:33:31 Msec=3000 True Az=176.01 Ze=-58.635 Az status=0008 Ze status=0009 02:33:31 Check angles 02:33:31 SkyScan query 02:33:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 02:33:32 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 02:33:32 Message to Master queued w/err=0: serial=127979 error=0 02:33:37 Received message from Master: op=Filter serial=127980 02:33:37 Color wheel filter change from 0 to 0 02:33:37 FLIGetFilterPos err=0 currentPosition=0 02:33:37 FLIGetStepsRemaining err=0 RemainingSteps=0 02:33:37 Filter is already there-color wheel unchanged 02:33:37 Received message from Master: op=Shutter serial=127981 02:33:37 Shutter LASER close 02:33:37 Received message from Camera: op=State serial=127983 02:33:37 GetSingleValue result=40 Value=cccccccc 02:33:37 SkyScan query 02:33:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:33:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:38 Parameters OK 02:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:38 Set A/D data flow result=40 02:33:38 Set A/D channel type result=40 02:33:38 Set A/D encoding result=40 02:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:38 Set channel filter=0.000000e+000 result=40 02:33:38 Config A/D Result=40 02:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:38 Get A/D filter: -9.255963e+061 result=40 02:33:38 Get A/D value=-858993460 result=40 02:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:38 Parameters OK 02:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:38 Set A/D data flow result=40 02:33:38 Set A/D channel type result=40 02:33:38 Set A/D encoding result=40 02:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:38 Set channel filter=0.000000e+000 result=40 02:33:38 Config A/D Result=40 02:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:38 Get A/D filter: -9.255963e+061 result=40 02:33:38 Get A/D value=-858993460 result=40 02:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:33:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:33:38 Aux= 02:33:38 Message to Camera, serial 127983 queued 02:34:14 Received message from Master: op=PointingHead serial=127996 02:34:14 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:34:14 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:34:15 Point started: ret=0 02:34:15 point_skyscan result=0 02:34:16 Check angles 02:34:16 SkyScan query 02:34:16 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.96<-13464 Statuses=0009 0009 02:34:16 Msec=0 True Az=153.105 Ze=-21.96 Az status=0009 Ze status=0009 02:34:16 Check angles 02:34:16 SkyScan query 02:34:17 SkyScan query done: ret=0 az=135.72<-9048 ze=-0.96<-12064 Statuses=0009 0009 02:34:17 Msec=750 True Az=135.72 Ze=-0.96 Az status=0009 Ze status=0009 02:34:17 Check angles 02:34:17 SkyScan query 02:34:18 SkyScan query done: ret=0 az=118.11<-7874 ze=19.965<-10669 Statuses=0009 0009 02:34:18 Msec=1500 True Az=118.11 Ze=19.965 Az status=0009 Ze status=0009 02:34:18 Check angles 02:34:18 SkyScan query 02:34:18 SkyScan query done: ret=0 az=100.725<-6715 ze=40.965<-9269 Statuses=0009 0009 02:34:18 Msec=2250 True Az=100.725 Ze=40.965 Az status=0009 Ze status=0009 02:34:19 Check angles 02:34:19 SkyScan query 02:34:19 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 02:34:19 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 02:34:19 Check angles 02:34:19 SkyScan query 02:34:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:34:20 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:34:20 Message to Master queued w/err=0: serial=127996 error=0 02:34:25 Received message from Master: op=Filter serial=127997 02:34:25 Color wheel filter change from 0 to 0 02:34:25 FLIGetFilterPos err=0 currentPosition=0 02:34:25 FLIGetStepsRemaining err=0 RemainingSteps=0 02:34:25 Filter is already there-color wheel unchanged 02:34:25 Received message from Master: op=Shutter serial=127998 02:34:25 Shutter LASER close 02:34:25 Received message from Camera: op=State serial=128000 02:34:25 GetSingleValue result=40 Value=cccccccc 02:34:25 SkyScan query 02:34:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:34:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:34:26 Parameters OK 02:34:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:34:26 Set A/D data flow result=40 02:34:26 Set A/D channel type result=40 02:34:26 Set A/D encoding result=40 02:34:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:34:26 Set channel filter=0.000000e+000 result=40 02:34:26 Config A/D Result=40 02:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:34:26 Get A/D filter: -9.255963e+061 result=40 02:34:26 Get A/D value=-858993460 result=40 02:34:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:34:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:34:26 Parameters OK 02:34:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:34:26 Set A/D data flow result=40 02:34:26 Set A/D channel type result=40 02:34:26 Set A/D encoding result=40 02:34:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:34:26 Set channel filter=0.000000e+000 result=40 02:34:26 Config A/D Result=40 02:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:34:26 Get A/D filter: -9.255963e+061 result=40 02:34:26 Get A/D value=-858993460 result=40 02:34:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:34:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:34:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:34:26 Aux= 02:34:26 Message to Camera, serial 128000 queued 02:35:03 Received message from Master: op=PointingHead serial=128013 02:35:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:35:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:35:03 Point started: ret=0 02:35:03 point_skyscan result=0 02:35:04 Check angles 02:35:04 SkyScan query 02:35:04 SkyScan query done: ret=0 az=85.995<-5733 ze=21.24<-10584 Statuses=0008 0009 02:35:04 Msec=0 True Az=85.995 Ze=21.24 Az status=0008 Ze status=0009 02:35:05 Check angles 02:35:05 SkyScan query 02:35:05 SkyScan query done: ret=0 az=85.995<-5733 ze=0.3<-11980 Statuses=0008 0009 02:35:05 Msec=750 True Az=85.995 Ze=0.3 Az status=0008 Ze status=0009 02:35:05 Check angles 02:35:05 SkyScan query 02:35:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.67<-13378 Statuses=0008 0009 02:35:06 Msec=1500 True Az=85.995 Ze=-20.67 Az status=0008 Ze status=0009 02:35:06 Check angles 02:35:06 SkyScan query 02:35:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.595<-14773 Statuses=0008 0009 02:35:07 Msec=2250 True Az=85.995 Ze=-41.595 Az status=0008 Ze status=0009 02:35:07 Check angles 02:35:07 SkyScan query 02:35:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:35:07 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:35:07 Message to Master queued w/err=0: serial=128013 error=0 02:35:12 Received message from Master: op=Filter serial=128014 02:35:12 Color wheel filter change from 0 to 0 02:35:12 FLIGetFilterPos err=0 currentPosition=0 02:35:12 FLIGetStepsRemaining err=0 RemainingSteps=0 02:35:12 Filter is already there-color wheel unchanged 02:35:13 Received message from Master: op=Shutter serial=128015 02:35:13 Shutter LASER close 02:35:13 Received message from Camera: op=State serial=128017 02:35:13 GetSingleValue result=40 Value=cccccccc 02:35:13 SkyScan query 02:35:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:35:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:13 Parameters OK 02:35:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:13 Set A/D data flow result=40 02:35:13 Set A/D channel type result=40 02:35:13 Set A/D encoding result=40 02:35:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:13 Set channel filter=0.000000e+000 result=40 02:35:13 Config A/D Result=40 02:35:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:13 Get A/D filter: -9.255963e+061 result=40 02:35:13 Get A/D value=-858993460 result=40 02:35:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:13 Parameters OK 02:35:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:13 Set A/D data flow result=40 02:35:13 Set A/D channel type result=40 02:35:13 Set A/D encoding result=40 02:35:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:13 Set channel filter=0.000000e+000 result=40 02:35:13 Config A/D Result=40 02:35:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:13 Get A/D filter: -9.255963e+061 result=40 02:35:13 Get A/D value=-858993460 result=40 02:35:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:35:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:35:13 Aux= 02:35:13 Message to Camera, serial 128017 queued 02:35:50 Received message from Master: op=PointingHead serial=128030 02:35:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:35:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:35:50 Point started: ret=0 02:35:50 point_skyscan result=0 [UTC 2018-12-14 02:35:51] 02:35:51 Check angles 02:35:51 SkyScan query 02:35:52 SkyScan query done: ret=0 az=110.715<-7381 ze=-83.385<-17559 Statuses=0009 0009 02:35:52 Msec=0 True Az=110.715 Ze=-83.385 Az status=0009 Ze status=0009 02:35:52 Check angles 02:35:52 SkyScan query 02:35:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.035<-18869 Statuses=0008 0009 02:35:52 Msec=750 True Az=112.995 Ze=-103.035 Az status=0008 Ze status=0009 [UTC 2018-12-14 02:35:52] 02:35:53 Check angles 02:35:53 SkyScan query 02:35:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.99<-20266 Statuses=0008 0009 02:35:53 Msec=1500 True Az=112.995 Ze=-123.99 Az status=0008 Ze status=0009 02:35:53 Check angles 02:35:53 SkyScan query 02:35:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.425<-21695 Statuses=0008 0009 02:35:54 Msec=2250 True Az=112.995 Ze=-145.425 Az status=0008 Ze status=0009 02:35:54 Check angles 02:35:54 SkyScan query 02:35:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.305<-23087 Statuses=0008 0009 02:35:55 Msec=3000 True Az=112.995 Ze=-166.305 Az status=0008 Ze status=0009 02:35:55 Check angles 02:35:55 SkyScan query 02:35:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:35:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:35:55 Message to Master queued w/err=0: serial=128030 error=0 02:36:00 Received message from Master: op=Filter serial=128031 02:36:00 Color wheel filter change from 0 to 0 02:36:00 FLIGetFilterPos err=0 currentPosition=0 02:36:00 FLIGetStepsRemaining err=0 RemainingSteps=0 02:36:00 Filter is already there-color wheel unchanged 02:36:01 Received message from Master: op=Shutter serial=128032 02:36:01 Shutter LASER open 02:36:01 Received message from Camera: op=State serial=128034 02:36:01 GetSingleValue result=40 Value=cccccccc 02:36:01 SkyScan query 02:36:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:36:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:01 Parameters OK 02:36:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:01 Set A/D data flow result=40 02:36:01 Set A/D channel type result=40 02:36:01 Set A/D encoding result=40 02:36:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:01 Set channel filter=0.000000e+000 result=40 02:36:01 Config A/D Result=40 02:36:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:01 Get A/D filter: -9.255963e+061 result=40 02:36:01 Get A/D value=-858993460 result=40 02:36:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:01 Parameters OK 02:36:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:01 Set A/D data flow result=40 02:36:01 Set A/D channel type result=40 02:36:01 Set A/D encoding result=40 02:36:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:01 Set channel filter=0.000000e+000 result=40 02:36:01 Config A/D Result=40 02:36:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:01 Get A/D filter: -9.255963e+061 result=40 02:36:01 Get A/D value=-858993460 result=40 02:36:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:36:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:36:01 Aux= 02:36:01 Message to Camera, serial 128034 queued 02:36:10 Received message from Master: op=Shutter serial=128044 02:36:10 Shutter LASER close 02:36:10 Received message from Master: op=PointingHead serial=128048 02:36:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:36:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:36:11 Point started: ret=0 02:36:11 point_skyscan result=0 02:36:11 Check angles 02:36:11 SkyScan query 02:36:12 SkyScan query done: ret=0 az=89.85<-5990 ze=157.14<-1524 Statuses=0009 0009 02:36:12 Msec=0 True Az=89.85 Ze=157.14 Az status=0009 Ze status=0009 02:36:12 Check angles 02:36:12 SkyScan query 02:36:13 SkyScan query done: ret=0 az=71.94<-4796 ze=135.735<-2951 Statuses=0009 0009 02:36:13 Msec=750 True Az=71.94 Ze=135.735 Az status=0009 Ze status=0009 02:36:13 Check angles 02:36:13 SkyScan query 02:36:13 SkyScan query done: ret=0 az=54.69<-3646 ze=114.765<-4349 Statuses=0009 0009 02:36:13 Msec=1500 True Az=54.69 Ze=114.765 Az status=0009 Ze status=0009 02:36:14 Check angles 02:36:14 SkyScan query 02:36:14 SkyScan query done: ret=0 az=41.01<-2734 ze=93.42<-5772 Statuses=0009 0009 02:36:14 Msec=2250 True Az=41.01 Ze=93.42 Az status=0009 Ze status=0009 02:36:14 Check angles 02:36:14 SkyScan query 02:36:15 SkyScan query done: ret=0 az=40.995<-2733 ze=72.405<-7173 Statuses=0008 0009 02:36:15 Msec=3000 True Az=40.995 Ze=72.405 Az status=0008 Ze status=0009 02:36:15 Check angles 02:36:15 SkyScan query 02:36:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.245<-8517 Statuses=0008 0009 02:36:16 Msec=3750 True Az=40.995 Ze=52.245 Az status=0008 Ze status=0009 02:36:16 Check angles 02:36:16 SkyScan query 02:36:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:36:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:36:16 Message to Master queued w/err=0: serial=128048 error=0 02:36:21 Received message from Master: op=Filter serial=128049 02:36:21 Color wheel filter change from 0 to 0 02:36:21 FLIGetFilterPos err=0 currentPosition=0 02:36:21 FLIGetStepsRemaining err=0 RemainingSteps=0 02:36:21 Filter is already there-color wheel unchanged 02:36:22 Received message from Master: op=Shutter serial=128050 02:36:22 Shutter LASER close 02:36:22 Received message from Camera: op=State serial=128052 02:36:22 GetSingleValue result=40 Value=cccccccc 02:36:22 SkyScan query 02:36:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:36:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:22 Parameters OK 02:36:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:22 Set A/D data flow result=40 02:36:22 Set A/D channel type result=40 02:36:22 Set A/D encoding result=40 02:36:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:22 Set channel filter=0.000000e+000 result=40 02:36:22 Config A/D Result=40 02:36:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:22 Get A/D filter: -9.255963e+061 result=40 02:36:22 Get A/D value=-858993460 result=40 02:36:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:22 Parameters OK 02:36:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:22 Set A/D data flow result=40 02:36:22 Set A/D channel type result=40 02:36:22 Set A/D encoding result=40 02:36:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:22 Set channel filter=0.000000e+000 result=40 02:36:22 Config A/D Result=40 02:36:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:22 Get A/D filter: -9.255963e+061 result=40 02:36:22 Get A/D value=-858993460 result=40 02:36:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:36:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:36:22 Aux= 02:36:22 Message to Camera, serial 128052 queued 02:36:59 Received message from Master: op=PointingHead serial=128065 02:36:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:36:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:37:00 Point started: ret=0 02:37:00 point_skyscan result=0 02:37:00 Check angles 02:37:00 SkyScan query 02:37:01 SkyScan query done: ret=0 az=40.995<-2733 ze=21.495<-10567 Statuses=0008 0009 02:37:01 Msec=0 True Az=40.995 Ze=21.495 Az status=0008 Ze status=0009 02:37:01 Check angles 02:37:01 SkyScan query 02:37:02 SkyScan query done: ret=0 az=40.995<-2733 ze=0.54<-11964 Statuses=0008 0009 02:37:02 Msec=750 True Az=40.995 Ze=0.54 Az status=0008 Ze status=0009 02:37:02 Check angles 02:37:02 SkyScan query 02:37:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.415<-13361 Statuses=0008 0009 02:37:02 Msec=1500 True Az=40.995 Ze=-20.415 Az status=0008 Ze status=0009 02:37:03 Check angles 02:37:03 SkyScan query 02:37:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 02:37:03 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 02:37:03 Check angles 02:37:03 SkyScan query 02:37:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:37:04 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:37:04 Message to Master queued w/err=0: serial=128065 error=0 02:37:09 Received message from Master: op=Filter serial=128066 02:37:09 Color wheel filter change from 0 to 0 02:37:09 FLIGetFilterPos err=0 currentPosition=0 02:37:09 FLIGetStepsRemaining err=0 RemainingSteps=0 02:37:09 Filter is already there-color wheel unchanged 02:37:09 Received message from Master: op=Shutter serial=128067 02:37:09 Shutter LASER close 02:37:09 Received message from Camera: op=State serial=128069 02:37:09 GetSingleValue result=40 Value=cccccccc 02:37:09 SkyScan query 02:37:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:37:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:10 Parameters OK 02:37:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:10 Set A/D data flow result=40 02:37:10 Set A/D channel type result=40 02:37:10 Set A/D encoding result=40 02:37:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:10 Set channel filter=0.000000e+000 result=40 02:37:10 Config A/D Result=40 02:37:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:10 Get A/D filter: -9.255963e+061 result=40 02:37:10 Get A/D value=-858993460 result=40 02:37:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:10 Parameters OK 02:37:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:10 Set A/D data flow result=40 02:37:10 Set A/D channel type result=40 02:37:10 Set A/D encoding result=40 02:37:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:10 Set channel filter=0.000000e+000 result=40 02:37:10 Config A/D Result=40 02:37:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:10 Get A/D filter: -9.255963e+061 result=40 02:37:10 Get A/D value=-858993460 result=40 02:37:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:37:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:37:10 Aux= 02:37:10 Message to Camera, serial 128069 queued 02:37:47 Received message from Master: op=PointingHead serial=128082 02:37:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:37:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:37:47 Point started: ret=0 02:37:47 point_skyscan result=0 02:37:48 Check angles 02:37:48 SkyScan query 02:37:48 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.205<-16547 Statuses=0009 0009 02:37:48 Msec=0 True Az=63.945 Ze=-68.205 Az status=0009 Ze status=0009 02:37:49 Check angles 02:37:49 SkyScan query 02:37:49 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.175<-17945 Statuses=0009 0009 02:37:49 Msec=750 True Az=81.33 Ze=-89.175 Az status=0009 Ze status=0009 02:37:49 Check angles 02:37:49 SkyScan query 02:37:50 SkyScan query done: ret=0 az=99.255<-6617 ze=-110.58<-19372 Statuses=0009 0009 02:37:50 Msec=1500 True Az=99.255 Ze=-110.58 Az status=0009 Ze status=0009 02:37:50 Check angles 02:37:50 SkyScan query 02:37:51 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.49<-20766 Statuses=0009 0009 02:37:51 Msec=2250 True Az=116.76 Ze=-131.49 Az status=0009 Ze status=0009 02:37:51 Check angles 02:37:51 SkyScan query 02:37:51 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.555<-21437 Statuses=0009 0008 02:37:51 Msec=3000 True Az=131.115 Ze=-141.555 Az status=0009 Ze status=0008 02:37:52 Check angles 02:37:52 SkyScan query 02:37:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 02:37:52 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 02:37:52 Message to Master queued w/err=0: serial=128082 error=0 02:37:57 Received message from Master: op=Filter serial=128083 02:37:57 Color wheel filter change from 0 to 0 02:37:57 FLIGetFilterPos err=0 currentPosition=0 02:37:57 FLIGetStepsRemaining err=0 RemainingSteps=0 02:37:57 Filter is already there-color wheel unchanged 02:37:57 Received message from Master: op=Shutter serial=128084 02:37:57 Shutter LASER close 02:37:57 Received message from Camera: op=State serial=128086 02:37:57 GetSingleValue result=40 Value=cccccccc 02:37:57 SkyScan query 02:37:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:37:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:58 Parameters OK 02:37:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:58 Set A/D data flow result=40 02:37:58 Set A/D channel type result=40 02:37:58 Set A/D encoding result=40 02:37:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:58 Set channel filter=0.000000e+000 result=40 02:37:58 Config A/D Result=40 02:37:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:58 Get A/D filter: -9.255963e+061 result=40 02:37:58 Get A/D value=-858993460 result=40 02:37:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:58 Parameters OK 02:37:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:58 Set A/D data flow result=40 02:37:58 Set A/D channel type result=40 02:37:58 Set A/D encoding result=40 02:37:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:58 Set channel filter=0.000000e+000 result=40 02:37:58 Config A/D Result=40 02:37:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:58 Get A/D filter: -9.255963e+061 result=40 02:37:58 Get A/D value=-858993460 result=40 02:37:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:37:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:37:58 Aux= 02:37:58 Message to Camera, serial 128086 queued 02:38:35 Received message from Master: op=PointingHead serial=128099 02:38:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:38:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:38:35 Point started: ret=0 02:38:35 point_skyscan result=0 02:38:36 Check angles 02:38:36 SkyScan query 02:38:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 02:38:36 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 02:38:37 Check angles 02:38:37 SkyScan query 02:38:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:38:37 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:38:37 Message to Master queued w/err=0: serial=128099 error=0 02:38:42 Received message from Master: op=Filter serial=128100 02:38:42 Color wheel filter change from 0 to 0 02:38:42 FLIGetFilterPos err=0 currentPosition=0 02:38:42 FLIGetStepsRemaining err=0 RemainingSteps=0 02:38:42 Filter is already there-color wheel unchanged 02:38:42 Received message from Master: op=Shutter serial=128101 02:38:42 Shutter LASER open 02:38:43 Received message from Camera: op=State serial=128103 02:38:43 GetSingleValue result=40 Value=cccccccc 02:38:43 SkyScan query 02:38:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:38:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:43 Parameters OK 02:38:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:43 Set A/D data flow result=40 02:38:43 Set A/D channel type result=40 02:38:43 Set A/D encoding result=40 02:38:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:43 Set channel filter=0.000000e+000 result=40 02:38:43 Config A/D Result=40 02:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:43 Get A/D filter: -9.255963e+061 result=40 02:38:43 Get A/D value=-858993460 result=40 02:38:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:43 Parameters OK 02:38:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:43 Set A/D data flow result=40 02:38:43 Set A/D channel type result=40 02:38:43 Set A/D encoding result=40 02:38:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:43 Set channel filter=0.000000e+000 result=40 02:38:43 Config A/D Result=40 02:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:43 Get A/D filter: -9.255963e+061 result=40 02:38:43 Get A/D value=-858993460 result=40 02:38:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:38:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:38:43 Aux= 02:38:43 Message to Camera, serial 128103 queued 02:38:52 Received message from Master: op=Shutter serial=128113 02:38:52 Shutter LASER close 02:38:52 Received message from Master: op=PointingHead serial=128117 02:38:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:38:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:38:52 Point started: ret=0 02:38:52 point_skyscan result=0 02:38:53 Check angles 02:38:53 SkyScan query 02:38:54 SkyScan query done: ret=0 az=136.485<-9099 ze=-142.665<-21511 Statuses=0009 0009 02:38:54 Msec=0 True Az=136.485 Ze=-142.665 Az status=0009 Ze status=0009 02:38:54 Check angles 02:38:54 SkyScan query 02:38:55 SkyScan query done: ret=0 az=153.87<-10258 ze=-121.725<-20115 Statuses=0009 0009 02:38:55 Msec=750 True Az=153.87 Ze=-121.725 Az status=0009 Ze status=0009 02:38:55 Check angles 02:38:55 SkyScan query 02:38:55 SkyScan query done: ret=0 az=171.75<-11450 ze=-100.275<-18685 Statuses=0009 0009 02:38:55 Msec=1500 True Az=171.75 Ze=-100.275 Az status=0009 Ze status=0009 02:38:56 Check angles 02:38:56 SkyScan query 02:38:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.365<-17291 Statuses=0008 0009 02:38:56 Msec=2250 True Az=176.01 Ze=-79.365 Az status=0008 Ze status=0009 02:38:56 Check angles 02:38:56 SkyScan query 02:38:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.395<-15893 Statuses=0008 0009 02:38:57 Msec=3000 True Az=176.01 Ze=-58.395 Az status=0008 Ze status=0009 02:38:57 Check angles 02:38:57 SkyScan query 02:38:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:38:58 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:38:58 Message to Master queued w/err=0: serial=128117 error=0 02:39:03 Received message from Master: op=Filter serial=128118 02:39:03 Color wheel filter change from 0 to 0 02:39:03 FLIGetFilterPos err=0 currentPosition=0 02:39:03 FLIGetStepsRemaining err=0 RemainingSteps=0 02:39:03 Filter is already there-color wheel unchanged 02:39:03 Received message from Master: op=Shutter serial=128119 02:39:03 Shutter LASER close 02:39:03 Received message from Camera: op=State serial=128121 02:39:03 GetSingleValue result=40 Value=cccccccc 02:39:03 SkyScan query 02:39:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:39:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:04 Parameters OK 02:39:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:04 Set A/D data flow result=40 02:39:04 Set A/D channel type result=40 02:39:04 Set A/D encoding result=40 02:39:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:04 Set channel filter=0.000000e+000 result=40 02:39:04 Config A/D Result=40 02:39:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:04 Get A/D filter: -9.255963e+061 result=40 02:39:04 Get A/D value=-858993460 result=40 02:39:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:04 Parameters OK 02:39:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:04 Set A/D data flow result=40 02:39:04 Set A/D channel type result=40 02:39:04 Set A/D encoding result=40 02:39:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:04 Set channel filter=0.000000e+000 result=40 02:39:04 Config A/D Result=40 02:39:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:04 Get A/D filter: -9.255963e+061 result=40 02:39:04 Get A/D value=-858993460 result=40 02:39:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:39:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:39:04 Aux= 02:39:04 Message to Camera, serial 128121 queued 02:39:40 Received message from Master: op=PointingHead serial=128134 02:39:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:39:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:39:41 Point started: ret=0 02:39:41 point_skyscan result=0 02:39:41 Check angles 02:39:41 SkyScan query 02:39:42 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.24<-13416 Statuses=0009 0009 02:39:42 Msec=0 True Az=152.655 Ze=-21.24 Az status=0009 Ze status=0009 02:39:42 Check angles 02:39:42 SkyScan query 02:39:43 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.3<-12020 Statuses=0009 0009 02:39:43 Msec=750 True Az=135.09 Ze=-0.3 Az status=0009 Ze status=0009 02:39:43 Check angles 02:39:43 SkyScan query 02:39:44 SkyScan query done: ret=0 az=117.57<-7838 ze=20.64<-10624 Statuses=0009 0009 02:39:44 Msec=1500 True Az=117.57 Ze=20.64 Az status=0009 Ze status=0009 02:39:44 Check angles 02:39:44 SkyScan query 02:39:44 SkyScan query done: ret=0 az=99.84<-6656 ze=42.03<-9198 Statuses=0009 0009 02:39:44 Msec=2250 True Az=99.84 Ze=42.03 Az status=0009 Ze status=0009 02:39:44 Check angles 02:39:44 SkyScan query 02:39:45 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 02:39:45 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 02:39:45 Check angles 02:39:45 SkyScan query 02:39:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:39:46 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 02:39:46 Message to Master queued w/err=0: serial=128134 error=0 02:39:51 Received message from Master: op=Filter serial=128135 02:39:51 Color wheel filter change from 0 to 0 02:39:51 FLIGetFilterPos err=0 currentPosition=0 02:39:51 FLIGetStepsRemaining err=0 RemainingSteps=0 02:39:51 Filter is already there-color wheel unchanged 02:39:51 Received message from Master: op=Shutter serial=128136 02:39:51 Shutter LASER close 02:39:51 Received message from Camera: op=State serial=128138 02:39:51 GetSingleValue result=40 Value=cccccccc 02:39:51 SkyScan query 02:39:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:39:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:52 Parameters OK 02:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:52 Set A/D data flow result=40 02:39:52 Set A/D channel type result=40 02:39:52 Set A/D encoding result=40 02:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:52 Set channel filter=0.000000e+000 result=40 02:39:52 Config A/D Result=40 02:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:52 Get A/D filter: -9.255963e+061 result=40 02:39:52 Get A/D value=-858993460 result=40 02:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:52 Parameters OK 02:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:52 Set A/D data flow result=40 02:39:52 Set A/D channel type result=40 02:39:52 Set A/D encoding result=40 02:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:52 Set channel filter=0.000000e+000 result=40 02:39:52 Config A/D Result=40 02:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:52 Get A/D filter: -9.255963e+061 result=40 02:39:52 Get A/D value=-858993460 result=40 02:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:39:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:39:52 Aux= 02:39:52 Message to Camera, serial 128138 queued 02:40:29 Received message from Master: op=PointingHead serial=128151 02:40:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:40:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:40:29 Point started: ret=0 02:40:29 point_skyscan result=0 02:40:30 Check angles 02:40:30 SkyScan query 02:40:30 SkyScan query done: ret=0 az=85.995<-5733 ze=21.81<-10546 Statuses=0008 0009 02:40:30 Msec=0 True Az=85.995 Ze=21.81 Az status=0008 Ze status=0009 02:40:30 Check angles 02:40:30 SkyScan query 02:40:31 SkyScan query done: ret=0 az=85.995<-5733 ze=0.885<-11941 Statuses=0008 0009 02:40:31 Msec=750 True Az=85.995 Ze=0.885 Az status=0008 Ze status=0009 02:40:31 Check angles 02:40:31 SkyScan query 02:40:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.1<-13340 Statuses=0008 0009 02:40:32 Msec=1500 True Az=85.995 Ze=-20.1 Az status=0008 Ze status=0009 02:40:32 Check angles 02:40:32 SkyScan query 02:40:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.01<-14734 Statuses=0008 0009 02:40:32 Msec=2250 True Az=85.995 Ze=-41.01 Az status=0008 Ze status=0009 02:40:33 Check angles 02:40:33 SkyScan query 02:40:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:40:33 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:40:33 Message to Master queued w/err=0: serial=128151 error=0 02:40:38 Received message from Master: op=Filter serial=128152 02:40:38 Color wheel filter change from 0 to 0 02:40:38 FLIGetFilterPos err=0 currentPosition=0 02:40:38 FLIGetStepsRemaining err=0 RemainingSteps=0 02:40:38 Filter is already there-color wheel unchanged 02:40:38 Received message from Master: op=Shutter serial=128153 02:40:38 Shutter LASER close 02:40:38 Received message from Camera: op=State serial=128155 02:40:38 GetSingleValue result=40 Value=cccccccc 02:40:38 SkyScan query 02:40:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:40:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:39 Parameters OK 02:40:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:39 Set A/D data flow result=40 02:40:39 Set A/D channel type result=40 02:40:39 Set A/D encoding result=40 02:40:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:39 Set channel filter=0.000000e+000 result=40 02:40:39 Config A/D Result=40 02:40:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:39 Get A/D filter: -9.255963e+061 result=40 02:40:39 Get A/D value=-858993460 result=40 02:40:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:39 Parameters OK 02:40:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:39 Set A/D data flow result=40 02:40:39 Set A/D channel type result=40 02:40:39 Set A/D encoding result=40 02:40:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:39 Set channel filter=0.000000e+000 result=40 02:40:39 Config A/D Result=40 02:40:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:39 Get A/D filter: -9.255963e+061 result=40 02:40:39 Get A/D value=-858993460 result=40 02:40:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:40:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:40:39 Aux= 02:40:39 Message to Camera, serial 128155 queued 02:41:16 Received message from Master: op=PointingHead serial=128168 02:41:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:41:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:41:16 Point started: ret=0 02:41:16 point_skyscan result=0 02:41:17 Check angles 02:41:17 SkyScan query 02:41:18 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.27<-17418 Statuses=0009 0009 02:41:18 Msec=0 True Az=108.945 Ze=-81.27 Az status=0009 Ze status=0009 02:41:18 Check angles 02:41:18 SkyScan query 02:41:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.69<-18846 Statuses=0008 0009 02:41:18 Msec=750 True Az=112.995 Ze=-102.69 Az status=0008 Ze status=0009 02:41:18 Check angles 02:41:18 SkyScan query 02:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 02:41:19 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 02:41:19 Check angles 02:41:19 SkyScan query 02:41:20 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.585<-21639 Statuses=0008 0009 02:41:20 Msec=2250 True Az=112.98 Ze=-144.585 Az status=0008 Ze status=0009 02:41:20 Check angles 02:41:20 SkyScan query 02:41:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.975<-23065 Statuses=0008 0009 02:41:21 Msec=3000 True Az=112.995 Ze=-165.975 Az status=0008 Ze status=0009 02:41:21 Check angles 02:41:21 SkyScan query 02:41:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:41:21 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:41:21 Message to Master queued w/err=0: serial=128168 error=0 02:41:26 Received message from Master: op=Filter serial=128169 02:41:26 Color wheel filter change from 0 to 0 02:41:26 FLIGetFilterPos err=0 currentPosition=0 02:41:26 FLIGetStepsRemaining err=0 RemainingSteps=0 02:41:26 Filter is already there-color wheel unchanged 02:41:26 Received message from Master: op=Shutter serial=128170 02:41:26 Shutter LASER open 02:41:27 Received message from Camera: op=State serial=128172 02:41:27 GetSingleValue result=40 Value=cccccccc 02:41:27 SkyScan query 02:41:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:41:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:27 Parameters OK 02:41:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:27 Set A/D data flow result=40 02:41:27 Set A/D channel type result=40 02:41:27 Set A/D encoding result=40 02:41:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:27 Set channel filter=0.000000e+000 result=40 02:41:27 Config A/D Result=40 02:41:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:27 Get A/D filter: -9.255963e+061 result=40 02:41:27 Get A/D value=-858993460 result=40 02:41:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:27 Parameters OK 02:41:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:27 Set A/D data flow result=40 02:41:27 Set A/D channel type result=40 02:41:27 Set A/D encoding result=40 02:41:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:27 Set channel filter=0.000000e+000 result=40 02:41:27 Config A/D Result=40 02:41:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:27 Get A/D filter: -9.255963e+061 result=40 02:41:27 Get A/D value=-858993460 result=40 02:41:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:41:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:41:27 Aux= 02:41:27 Message to Camera, serial 128172 queued 02:41:36 Received message from Master: op=Shutter serial=128182 02:41:36 Shutter LASER close 02:41:36 Received message from Master: op=PointingHead serial=128186 02:41:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:41:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:41:37 Point started: ret=0 02:41:37 point_skyscan result=0 02:41:37 Check angles 02:41:37 SkyScan query 02:41:38 SkyScan query done: ret=0 az=90.075<-6005 ze=157.35<-1510 Statuses=0009 0009 02:41:38 Msec=0 True Az=90.075 Ze=157.35 Az status=0009 Ze status=0009 02:41:38 Check angles 02:41:38 SkyScan query 02:41:39 SkyScan query done: ret=0 az=72.195<-4813 ze=135.945<-2937 Statuses=0009 0009 02:41:39 Msec=750 True Az=72.195 Ze=135.945 Az status=0009 Ze status=0009 02:41:39 Check angles 02:41:39 SkyScan query 02:41:39 SkyScan query done: ret=0 az=54.87<-3658 ze=115.02<-4332 Statuses=0009 0009 02:41:39 Msec=1500 True Az=54.87 Ze=115.02 Az status=0009 Ze status=0009 02:41:40 Check angles 02:41:40 SkyScan query 02:41:40 SkyScan query done: ret=0 az=41.01<-2734 ze=93.6<-5760 Statuses=0009 0009 02:41:40 Msec=2250 True Az=41.01 Ze=93.6 Az status=0009 Ze status=0009 02:41:40 Check angles 02:41:40 SkyScan query 02:41:41 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 02:41:41 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 02:41:41 Check angles 02:41:41 SkyScan query 02:41:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 02:41:42 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 02:41:42 Check angles 02:41:42 SkyScan query 02:41:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:41:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:41:42 Message to Master queued w/err=0: serial=128186 error=0 02:41:47 Received message from Master: op=Filter serial=128187 02:41:47 Color wheel filter change from 0 to 0 02:41:47 FLIGetFilterPos err=0 currentPosition=0 02:41:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:41:47 Filter is already there-color wheel unchanged 02:41:48 Received message from Master: op=Shutter serial=128188 02:41:48 Shutter LASER close 02:41:48 Received message from Camera: op=State serial=128190 02:41:48 GetSingleValue result=40 Value=cccccccc 02:41:48 SkyScan query 02:41:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:41:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:48 Parameters OK 02:41:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:48 Set A/D data flow result=40 02:41:48 Set A/D channel type result=40 02:41:48 Set A/D encoding result=40 02:41:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:48 Set channel filter=0.000000e+000 result=40 02:41:48 Config A/D Result=40 02:41:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:48 Get A/D filter: -9.255963e+061 result=40 02:41:48 Get A/D value=-858993460 result=40 02:41:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:48 Parameters OK 02:41:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:48 Set A/D data flow result=40 02:41:48 Set A/D channel type result=40 02:41:48 Set A/D encoding result=40 02:41:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:48 Set channel filter=0.000000e+000 result=40 02:41:48 Config A/D Result=40 02:41:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:48 Get A/D filter: -9.255963e+061 result=40 02:41:48 Get A/D value=-858993460 result=40 02:41:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:41:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:41:48 Aux= 02:41:48 Message to Camera, serial 128190 queued 02:42:25 Received message from Master: op=PointingHead serial=128203 02:42:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:42:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:42:26 Point started: ret=0 02:42:26 point_skyscan result=0 02:42:26 Check angles 02:42:26 SkyScan query 02:42:27 SkyScan query done: ret=0 az=40.995<-2733 ze=21.24<-10584 Statuses=0008 0009 02:42:27 Msec=0 True Az=40.995 Ze=21.24 Az status=0008 Ze status=0009 02:42:27 Check angles 02:42:27 SkyScan query 02:42:28 SkyScan query done: ret=0 az=40.995<-2733 ze=0.285<-11981 Statuses=0008 0009 02:42:28 Msec=750 True Az=40.995 Ze=0.285 Az status=0008 Ze status=0009 02:42:28 Check angles 02:42:28 SkyScan query 02:42:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.67<-13378 Statuses=0008 0009 02:42:28 Msec=1500 True Az=40.995 Ze=-20.67 Az status=0008 Ze status=0009 02:42:29 Check angles 02:42:29 SkyScan query 02:42:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 02:42:29 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 02:42:29 Check angles 02:42:29 SkyScan query 02:42:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:42:30 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:42:30 Message to Master queued w/err=0: serial=128203 error=0 02:42:35 Received message from Master: op=Filter serial=128204 02:42:35 Color wheel filter change from 0 to 0 02:42:35 FLIGetFilterPos err=0 currentPosition=0 02:42:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:42:35 Filter is already there-color wheel unchanged 02:42:35 Received message from Master: op=Shutter serial=128205 02:42:35 Shutter LASER close 02:42:35 Received message from Camera: op=State serial=128207 02:42:35 GetSingleValue result=40 Value=cccccccc 02:42:35 SkyScan query 02:42:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:42:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:42:36 Parameters OK 02:42:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:42:36 Set A/D data flow result=40 02:42:36 Set A/D channel type result=40 02:42:36 Set A/D encoding result=40 02:42:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:42:36 Set channel filter=0.000000e+000 result=40 02:42:36 Config A/D Result=40 02:42:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:42:36 Get A/D filter: -9.255963e+061 result=40 02:42:36 Get A/D value=-858993460 result=40 02:42:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:42:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:42:36 Parameters OK 02:42:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:42:36 Set A/D data flow result=40 02:42:36 Set A/D channel type result=40 02:42:36 Set A/D encoding result=40 02:42:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:42:36 Set channel filter=0.000000e+000 result=40 02:42:36 Config A/D Result=40 02:42:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:42:36 Get A/D filter: -9.255963e+061 result=40 02:42:36 Get A/D value=-858993460 result=40 02:42:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:42:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:42:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:42:36 Aux= 02:42:36 Message to Camera, serial 128207 queued 02:43:13 Received message from Master: op=PointingHead serial=128220 02:43:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:43:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:43:13 Point started: ret=0 02:43:13 point_skyscan result=0 02:43:14 Check angles 02:43:14 SkyScan query 02:43:14 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.025<-16535 Statuses=0009 0009 02:43:14 Msec=0 True Az=63.765 Ze=-68.025 Az status=0009 Ze status=0009 02:43:14 Check angles 02:43:14 SkyScan query 02:43:15 SkyScan query done: ret=0 az=81.27<-5418 ze=-88.98<-17932 Statuses=0009 0009 02:43:15 Msec=750 True Az=81.27 Ze=-88.98 Az status=0009 Ze status=0009 02:43:15 Check angles 02:43:15 SkyScan query 02:43:16 SkyScan query done: ret=0 az=98.805<-6587 ze=-109.92<-19328 Statuses=0009 0009 02:43:16 Msec=1500 True Az=98.805 Ze=-109.92 Az status=0009 Ze status=0009 02:43:16 Check angles 02:43:16 SkyScan query 02:43:17 SkyScan query done: ret=0 az=116.16<-7744 ze=-130.905<-20727 Statuses=0009 0009 02:43:17 Msec=2250 True Az=116.16 Ze=-130.905 Az status=0009 Ze status=0009 02:43:17 Check angles 02:43:17 SkyScan query 02:43:17 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 02:43:17 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 02:43:17 Check angles 02:43:17 SkyScan query 02:43:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:43:18 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:43:18 Message to Master queued w/err=0: serial=128220 error=0 02:43:23 Received message from Master: op=Filter serial=128221 02:43:23 Color wheel filter change from 0 to 0 02:43:23 FLIGetFilterPos err=0 currentPosition=0 02:43:23 FLIGetStepsRemaining err=0 RemainingSteps=0 02:43:23 Filter is already there-color wheel unchanged 02:43:23 Received message from Master: op=Shutter serial=128222 02:43:23 Shutter LASER close 02:43:23 Received message from Camera: op=State serial=128224 02:43:23 GetSingleValue result=40 Value=cccccccc 02:43:23 SkyScan query 02:43:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.495<-21433 Statuses=0008 0008 02:43:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:24 Parameters OK 02:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:24 Set A/D data flow result=40 02:43:24 Set A/D channel type result=40 02:43:24 Set A/D encoding result=40 02:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:24 Set channel filter=0.000000e+000 result=40 02:43:24 Config A/D Result=40 02:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:24 Get A/D filter: -9.255963e+061 result=40 02:43:24 Get A/D value=-858993460 result=40 02:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:24 Parameters OK 02:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:24 Set A/D data flow result=40 02:43:24 Set A/D channel type result=40 02:43:24 Set A/D encoding result=40 02:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:24 Set channel filter=0.000000e+000 result=40 02:43:24 Config A/D Result=40 02:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:24 Get A/D filter: -9.255963e+061 result=40 02:43:24 Get A/D value=-858993460 result=40 02:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:24 PH type=1 Digital in=000000 Instrument Az=131.009995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:43:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:43:24 Aux= 02:43:24 Message to Camera, serial 128224 queued 02:44:01 Received message from Master: op=PointingHead serial=128237 02:44:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:44:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:44:01 Point started: ret=0 02:44:01 point_skyscan result=0 02:44:02 Check angles 02:44:02 SkyScan query 02:44:02 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 02:44:02 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 02:44:02 Check angles 02:44:02 SkyScan query 02:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:44:03 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:44:03 Message to Master queued w/err=0: serial=128237 error=0 02:44:08 Received message from Master: op=Filter serial=128238 02:44:08 Color wheel filter change from 0 to 0 02:44:08 FLIGetFilterPos err=0 currentPosition=0 02:44:08 FLIGetStepsRemaining err=0 RemainingSteps=0 02:44:08 Filter is already there-color wheel unchanged 02:44:08 Received message from Master: op=Shutter serial=128239 02:44:08 Shutter LASER open 02:44:08 Received message from Camera: op=State serial=128241 02:44:08 GetSingleValue result=40 Value=cccccccc 02:44:08 SkyScan query 02:44:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:44:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:09 Parameters OK 02:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:09 Set A/D data flow result=40 02:44:09 Set A/D channel type result=40 02:44:09 Set A/D encoding result=40 02:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:09 Set channel filter=0.000000e+000 result=40 02:44:09 Config A/D Result=40 02:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:09 Get A/D filter: -9.255963e+061 result=40 02:44:09 Get A/D value=-858993460 result=40 02:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:09 Parameters OK 02:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:09 Set A/D data flow result=40 02:44:09 Set A/D channel type result=40 02:44:09 Set A/D encoding result=40 02:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:09 Set channel filter=0.000000e+000 result=40 02:44:09 Config A/D Result=40 02:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:09 Get A/D filter: -9.255963e+061 result=40 02:44:09 Get A/D value=-858993460 result=40 02:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:44:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:44:09 Aux= 02:44:09 Message to Camera, serial 128241 queued 02:44:17 Received message from Master: op=Shutter serial=128251 02:44:17 Shutter LASER close 02:44:18 Received message from Master: op=PointingHead serial=128255 02:44:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:44:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:44:18 Point started: ret=0 02:44:18 point_skyscan result=0 02:44:19 Check angles 02:44:19 SkyScan query 02:44:20 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.445<-21563 Statuses=0009 0009 02:44:20 Msec=0 True Az=135.75 Ze=-143.445 Az status=0009 Ze status=0009 02:44:20 Check angles 02:44:20 SkyScan query 02:44:20 SkyScan query done: ret=0 az=153.615<-10241 ze=-121.995<-20133 Statuses=0009 0009 02:44:20 Msec=750 True Az=153.615 Ze=-121.995 Az status=0009 Ze status=0009 02:44:21 Check angles 02:44:21 SkyScan query 02:44:21 SkyScan query done: ret=0 az=171.33<-11422 ze=-100.56<-18704 Statuses=0009 0009 02:44:21 Msec=1500 True Az=171.33 Ze=-100.56 Az status=0009 Ze status=0009 02:44:21 Check angles 02:44:21 SkyScan query 02:44:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.605<-17307 Statuses=0008 0009 02:44:22 Msec=2250 True Az=176.01 Ze=-79.605 Az status=0008 Ze status=0009 02:44:22 Check angles 02:44:22 SkyScan query 02:44:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.635<-15909 Statuses=0008 0009 02:44:23 Msec=3000 True Az=176.01 Ze=-58.635 Az status=0008 Ze status=0009 02:44:23 Check angles 02:44:23 SkyScan query 02:44:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:44:23 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:44:23 Message to Master queued w/err=0: serial=128255 error=0 02:44:28 Received message from Master: op=Filter serial=128256 02:44:28 Color wheel filter change from 0 to 0 02:44:28 FLIGetFilterPos err=0 currentPosition=0 02:44:28 FLIGetStepsRemaining err=0 RemainingSteps=0 02:44:28 Filter is already there-color wheel unchanged 02:44:29 Received message from Master: op=Shutter serial=128257 02:44:29 Shutter LASER close 02:44:29 Received message from Camera: op=State serial=128259 02:44:29 GetSingleValue result=40 Value=cccccccc 02:44:29 SkyScan query 02:44:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:44:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:29 Parameters OK 02:44:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:29 Set A/D data flow result=40 02:44:29 Set A/D channel type result=40 02:44:29 Set A/D encoding result=40 02:44:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:29 Set channel filter=0.000000e+000 result=40 02:44:29 Config A/D Result=40 02:44:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:29 Get A/D filter: -9.255963e+061 result=40 02:44:29 Get A/D value=-858993460 result=40 02:44:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:29 Parameters OK 02:44:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:29 Set A/D data flow result=40 02:44:29 Set A/D channel type result=40 02:44:29 Set A/D encoding result=40 02:44:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:29 Set channel filter=0.000000e+000 result=40 02:44:29 Config A/D Result=40 02:44:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:29 Get A/D filter: -9.255963e+061 result=40 02:44:29 Get A/D value=-858993460 result=40 02:44:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:44:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:44:29 Aux= 02:44:29 Message to Camera, serial 128259 queued 02:45:06 Received message from Master: op=PointingHead serial=128272 02:45:06 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:45:06 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:45:07 Point started: ret=0 02:45:07 point_skyscan result=0 02:45:07 Check angles 02:45:07 SkyScan query 02:45:08 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.3<-13420 Statuses=0009 0009 02:45:08 Msec=0 True Az=152.76 Ze=-21.3 Az status=0009 Ze status=0009 02:45:08 Check angles 02:45:08 SkyScan query 02:45:09 SkyScan query done: ret=0 az=135.255<-9017 ze=-0.33<-12022 Statuses=0009 0009 02:45:09 Msec=750 True Az=135.255 Ze=-0.33 Az status=0009 Ze status=0009 02:45:09 Check angles 02:45:09 SkyScan query 02:45:10 SkyScan query done: ret=0 az=117.765<-7851 ze=20.595<-10627 Statuses=0009 0009 02:45:10 Msec=1500 True Az=117.765 Ze=20.595 Az status=0009 Ze status=0009 02:45:10 Check angles 02:45:10 SkyScan query 02:45:10 SkyScan query done: ret=0 az=100.245<-6683 ze=41.595<-9227 Statuses=0009 0009 02:45:10 Msec=2250 True Az=100.245 Ze=41.595 Az status=0009 Ze status=0009 02:45:10 Check angles 02:45:10 SkyScan query 02:45:11 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 02:45:11 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 02:45:11 Check angles 02:45:11 SkyScan query 02:45:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:45:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:45:12 Message to Master queued w/err=0: serial=128272 error=0 02:45:17 Received message from Master: op=Filter serial=128273 02:45:17 Color wheel filter change from 0 to 0 02:45:17 FLIGetFilterPos err=0 currentPosition=0 02:45:17 FLIGetStepsRemaining err=0 RemainingSteps=0 02:45:17 Filter is already there-color wheel unchanged 02:45:17 Received message from Master: op=Shutter serial=128274 02:45:17 Shutter LASER close 02:45:17 Received message from Camera: op=State serial=128276 02:45:17 GetSingleValue result=40 Value=cccccccc 02:45:17 SkyScan query 02:45:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:45:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:18 Parameters OK 02:45:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:18 Set A/D data flow result=40 02:45:18 Set A/D channel type result=40 [UTC 2018-12-14 02:45:18] 02:45:18 Set A/D encoding result=40 02:45:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:18 Set channel filter=0.000000e+000 result=40 02:45:18 Config A/D Result=40 02:45:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:18 Get A/D filter: -9.255963e+061 result=40 02:45:18 Get A/D value=-858993460 result=40 02:45:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:18 Parameters OK 02:45:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:18 Set A/D data flow result=40 02:45:18 Set A/D channel type result=40 02:45:18 Set A/D encoding result=40 02:45:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:18 Set channel filter=0.000000e+000 result=40 02:45:18 Config A/D Result=40 02:45:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:18 Get A/D filter: -9.255963e+061 result=40 02:45:18 Get A/D value=-858993460 result=40 02:45:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:45:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:45:18 Aux= 02:45:18 Message to Camera, serial 128276 queued 02:45:27 Received message from Master: op=Identify serial=128277 02:45:54 Received message from Master: op=PointingHead serial=128292 02:45:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:45:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:45:55 Point started: ret=0 02:45:55 point_skyscan result=0 02:45:56 Check angles 02:45:56 SkyScan query 02:45:56 SkyScan query done: ret=0 az=85.995<-5733 ze=21.705<-10553 Statuses=0008 0009 02:45:56 Msec=0 True Az=85.995 Ze=21.705 Az status=0008 Ze status=0009 02:45:56 Check angles 02:45:56 SkyScan query 02:45:57 SkyScan query done: ret=0 az=85.995<-5733 ze=0.69<-11954 Statuses=0008 0009 02:45:57 Msec=750 True Az=85.995 Ze=0.69 Az status=0008 Ze status=0009 02:45:57 Check angles 02:45:57 SkyScan query 02:45:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.61<-13374 Statuses=0008 0009 02:45:58 Msec=1500 True Az=85.995 Ze=-20.61 Az status=0008 Ze status=0009 02:45:58 Check angles 02:45:58 SkyScan query 02:45:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.535<-14769 Statuses=0008 0009 02:45:58 Msec=2250 True Az=85.995 Ze=-41.535 Az status=0008 Ze status=0009 02:45:59 Check angles 02:45:59 SkyScan query 02:45:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:45:59 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:45:59 Message to Master queued w/err=0: serial=128292 error=0 02:46:04 Received message from Master: op=Filter serial=128293 02:46:04 Color wheel filter change from 0 to 0 02:46:04 FLIGetFilterPos err=0 currentPosition=0 02:46:04 FLIGetStepsRemaining err=0 RemainingSteps=0 02:46:04 Filter is already there-color wheel unchanged 02:46:04 Received message from Master: op=Shutter serial=128294 02:46:04 Shutter LASER close 02:46:05 Received message from Camera: op=State serial=128296 02:46:05 GetSingleValue result=40 Value=cccccccc 02:46:05 SkyScan query 02:46:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:46:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:05 Parameters OK 02:46:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:05 Set A/D data flow result=40 02:46:05 Set A/D channel type result=40 02:46:05 Set A/D encoding result=40 02:46:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:05 Set channel filter=0.000000e+000 result=40 02:46:05 Config A/D Result=40 02:46:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:05 Get A/D filter: -9.255963e+061 result=40 02:46:05 Get A/D value=-858993460 result=40 02:46:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:05 Parameters OK 02:46:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:05 Set A/D data flow result=40 02:46:05 Set A/D channel type result=40 02:46:05 Set A/D encoding result=40 02:46:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:05 Set channel filter=0.000000e+000 result=40 02:46:05 Config A/D Result=40 02:46:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:05 Get A/D filter: -9.255963e+061 result=40 02:46:05 Get A/D value=-858993460 result=40 02:46:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:46:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:46:05 Aux= 02:46:05 Message to Camera, serial 128296 queued 02:46:42 Received message from Master: op=PointingHead serial=128309 02:46:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:46:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:46:42 Point started: ret=0 02:46:42 point_skyscan result=0 02:46:43 Check angles 02:46:43 SkyScan query 02:46:44 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.33<-17422 Statuses=0009 0009 02:46:44 Msec=0 True Az=109.035 Ze=-81.33 Az status=0009 Ze status=0009 02:46:44 Check angles 02:46:44 SkyScan query 02:46:44 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.285<-18819 Statuses=0008 0009 02:46:44 Msec=750 True Az=112.98 Ze=-102.285 Az status=0008 Ze status=0009 02:46:45 Check angles 02:46:45 SkyScan query 02:46:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.24<-20216 Statuses=0008 0009 02:46:45 Msec=1500 True Az=112.995 Ze=-123.24 Az status=0008 Ze status=0009 02:46:45 Check angles 02:46:45 SkyScan query 02:46:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.195<-21613 Statuses=0008 0009 02:46:46 Msec=2250 True Az=112.995 Ze=-144.195 Az status=0008 Ze status=0009 02:46:46 Check angles 02:46:46 SkyScan query 02:46:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.15<-23010 Statuses=0008 0009 02:46:47 Msec=3000 True Az=112.995 Ze=-165.15 Az status=0008 Ze status=0009 02:46:47 Check angles 02:46:47 SkyScan query 02:46:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:46:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:46:47 Message to Master queued w/err=0: serial=128309 error=0 02:46:52 Received message from Master: op=Filter serial=128310 02:46:52 Color wheel filter change from 0 to 0 02:46:52 FLIGetFilterPos err=0 currentPosition=0 02:46:52 FLIGetStepsRemaining err=0 RemainingSteps=0 02:46:52 Filter is already there-color wheel unchanged 02:46:53 Received message from Master: op=Shutter serial=128311 02:46:53 Shutter LASER open 02:46:53 Received message from Camera: op=State serial=128313 02:46:53 GetSingleValue result=40 Value=cccccccc 02:46:53 SkyScan query 02:46:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:46:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:53 Parameters OK 02:46:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:53 Set A/D data flow result=40 02:46:53 Set A/D channel type result=40 02:46:53 Set A/D encoding result=40 02:46:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:53 Set channel filter=0.000000e+000 result=40 02:46:53 Config A/D Result=40 02:46:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:53 Get A/D filter: -9.255963e+061 result=40 02:46:53 Get A/D value=-858993460 result=40 02:46:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:53 Parameters OK 02:46:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:53 Set A/D data flow result=40 02:46:53 Set A/D channel type result=40 02:46:53 Set A/D encoding result=40 02:46:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:53 Set channel filter=0.000000e+000 result=40 02:46:53 Config A/D Result=40 02:46:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:53 Get A/D filter: -9.255963e+061 result=40 02:46:53 Get A/D value=-858993460 result=40 02:46:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:46:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:46:53 Aux= 02:46:53 Message to Camera, serial 128313 queued 02:47:02 Received message from Master: op=Shutter serial=128323 02:47:02 Shutter LASER close 02:47:02 Received message from Master: op=PointingHead serial=128327 02:47:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:47:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:47:02 Point started: ret=0 02:47:02 point_skyscan result=0 02:47:03 Check angles 02:47:03 SkyScan query 02:47:04 SkyScan query done: ret=0 az=89.85<-5990 ze=157.065<-1529 Statuses=0009 0009 02:47:04 Msec=0 True Az=89.85 Ze=157.065 Az status=0009 Ze status=0009 02:47:04 Check angles 02:47:04 SkyScan query 02:47:05 SkyScan query done: ret=0 az=72.255<-4817 ze=136.125<-2925 Statuses=0009 0009 02:47:05 Msec=750 True Az=72.255 Ze=136.125 Az status=0009 Ze status=0009 02:47:05 Check angles 02:47:05 SkyScan query 02:47:05 SkyScan query done: ret=0 az=54.915<-3661 ze=115.185<-4321 Statuses=0009 0009 02:47:05 Msec=1500 True Az=54.915 Ze=115.185 Az status=0009 Ze status=0009 02:47:05 Check angles 02:47:05 SkyScan query 02:47:06 SkyScan query done: ret=0 az=41.025<-2735 ze=94.185<-5721 Statuses=0009 0009 02:47:06 Msec=2250 True Az=41.025 Ze=94.185 Az status=0009 Ze status=0009 02:47:06 Check angles 02:47:06 SkyScan query 02:47:07 SkyScan query done: ret=0 az=40.995<-2733 ze=73.245<-7117 Statuses=0008 0009 02:47:07 Msec=3000 True Az=40.995 Ze=73.245 Az status=0008 Ze status=0009 02:47:07 Check angles 02:47:07 SkyScan query 02:47:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 02:47:08 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 02:47:08 Check angles 02:47:08 SkyScan query 02:47:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:47:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:47:08 Message to Master queued w/err=0: serial=128327 error=0 02:47:13 Received message from Master: op=Filter serial=128328 02:47:13 Color wheel filter change from 0 to 0 02:47:13 FLIGetFilterPos err=0 currentPosition=0 02:47:13 FLIGetStepsRemaining err=0 RemainingSteps=0 02:47:13 Filter is already there-color wheel unchanged 02:47:13 Received message from Master: op=Shutter serial=128329 02:47:13 Shutter LASER close 02:47:14 Received message from Camera: op=State serial=128331 02:47:14 GetSingleValue result=40 Value=cccccccc 02:47:14 SkyScan query 02:47:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:47:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:14 Parameters OK 02:47:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:14 Set A/D data flow result=40 02:47:14 Set A/D channel type result=40 02:47:14 Set A/D encoding result=40 02:47:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:14 Set channel filter=0.000000e+000 result=40 02:47:14 Config A/D Result=40 02:47:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:14 Get A/D filter: -9.255963e+061 result=40 02:47:14 Get A/D value=-858993460 result=40 02:47:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:14 Parameters OK 02:47:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:14 Set A/D data flow result=40 02:47:14 Set A/D channel type result=40 02:47:14 Set A/D encoding result=40 02:47:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:14 Set channel filter=0.000000e+000 result=40 02:47:14 Config A/D Result=40 02:47:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:14 Get A/D filter: -9.255963e+061 result=40 02:47:14 Get A/D value=-858993460 result=40 02:47:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:47:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:47:14 Aux= 02:47:14 Message to Camera, serial 128331 queued 02:47:50 Received message from Master: op=PointingHead serial=128343 02:47:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:47:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:47:51 Point started: ret=0 02:47:51 point_skyscan result=0 02:47:51 Check angles 02:47:51 SkyScan query 02:47:52 SkyScan query done: ret=0 az=40.98<-2732 ze=21.93<-10538 Statuses=0008 0009 02:47:52 Msec=0 True Az=40.98 Ze=21.93 Az status=0008 Ze status=0009 02:47:52 Check angles 02:47:52 SkyScan query 02:47:53 SkyScan query done: ret=0 az=40.98<-2732 ze=1.02<-11932 Statuses=0008 0009 02:47:53 Msec=750 True Az=40.98 Ze=1.02 Az status=0008 Ze status=0009 02:47:53 Check angles 02:47:53 SkyScan query 02:47:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-19.965<-13331 Statuses=0008 0009 02:47:53 Msec=1500 True Az=40.995 Ze=-19.965 Az status=0008 Ze status=0009 02:47:54 Check angles 02:47:54 SkyScan query 02:47:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0009 02:47:54 Msec=2250 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0009 02:47:54 Check angles 02:47:54 SkyScan query 02:47:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:47:55 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:47:55 Message to Master queued w/err=0: serial=128343 error=0 02:48:00 Received message from Master: op=Filter serial=128344 02:48:00 Color wheel filter change from 0 to 0 02:48:00 FLIGetFilterPos err=0 currentPosition=0 02:48:00 FLIGetStepsRemaining err=0 RemainingSteps=0 02:48:00 Filter is already there-color wheel unchanged 02:48:00 Received message from Master: op=Shutter serial=128345 02:48:00 Shutter LASER close 02:48:00 Received message from Camera: op=State serial=128347 02:48:00 GetSingleValue result=40 Value=cccccccc 02:48:00 SkyScan query 02:48:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:48:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:48:01 Parameters OK 02:48:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:48:01 Set A/D data flow result=40 02:48:01 Set A/D channel type result=40 02:48:01 Set A/D encoding result=40 02:48:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:48:01 Set channel filter=0.000000e+000 result=40 02:48:01 Config A/D Result=40 02:48:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:48:01 Get A/D filter: -9.255963e+061 result=40 02:48:01 Get A/D value=-858993460 result=40 02:48:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:48:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:48:01 Parameters OK 02:48:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:48:01 Set A/D data flow result=40 02:48:01 Set A/D channel type result=40 02:48:01 Set A/D encoding result=40 02:48:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:48:01 Set channel filter=0.000000e+000 result=40 02:48:01 Config A/D Result=40 02:48:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:48:01 Get A/D filter: -9.255963e+061 result=40 02:48:01 Get A/D value=-858993460 result=40 02:48:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:48:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:48:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:48:01 Aux= 02:48:01 Message to Camera, serial 128347 queued 02:48:38 Received message from Master: op=PointingHead serial=128360 02:48:38 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:48:38 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:48:38 Point started: ret=0 02:48:38 point_skyscan result=0 02:48:39 Check angles 02:48:39 SkyScan query 02:48:39 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.13<-16542 Statuses=0009 0009 02:48:39 Msec=0 True Az=63.825 Ze=-68.13 Az status=0009 Ze status=0009 02:48:39 Check angles 02:48:39 SkyScan query 02:48:40 SkyScan query done: ret=0 az=81.48<-5432 ze=-89.22<-17948 Statuses=0009 0009 02:48:40 Msec=750 True Az=81.48 Ze=-89.22 Az status=0009 Ze status=0009 02:48:40 Check angles 02:48:40 SkyScan query 02:48:41 SkyScan query done: ret=0 az=98.985<-6599 ze=-110.055<-19337 Statuses=0009 0009 02:48:41 Msec=1500 True Az=98.985 Ze=-110.055 Az status=0009 Ze status=0009 02:48:41 Check angles 02:48:41 SkyScan query 02:48:41 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.46<-20764 Statuses=0009 0009 02:48:41 Msec=2250 True Az=116.805 Ze=-131.46 Az status=0009 Ze status=0009 02:48:42 Check angles 02:48:42 SkyScan query 02:48:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 02:48:42 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 02:48:42 Check angles 02:48:42 SkyScan query 02:48:43 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 02:48:43 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 02:48:43 Message to Master queued w/err=0: serial=128360 error=0 02:48:48 Received message from Master: op=Filter serial=128361 02:48:48 Color wheel filter change from 0 to 0 02:48:48 FLIGetFilterPos err=0 currentPosition=0 02:48:48 FLIGetStepsRemaining err=0 RemainingSteps=0 02:48:48 Filter is already there-color wheel unchanged 02:48:48 Received message from Master: op=Shutter serial=128362 02:48:48 Shutter LASER close 02:48:48 Received message from Camera: op=State serial=128364 02:48:48 GetSingleValue result=40 Value=cccccccc 02:48:48 SkyScan query 02:48:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:48:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:48:49 Parameters OK 02:48:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:48:49 Set A/D data flow result=40 02:48:49 Set A/D channel type result=40 02:48:49 Set A/D encoding result=40 02:48:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:48:49 Set channel filter=0.000000e+000 result=40 02:48:49 Config A/D Result=40 02:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:48:49 Get A/D filter: -9.255963e+061 result=40 02:48:49 Get A/D value=-858993460 result=40 02:48:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:48:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:48:49 Parameters OK 02:48:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:48:49 Set A/D data flow result=40 02:48:49 Set A/D channel type result=40 02:48:49 Set A/D encoding result=40 02:48:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:48:49 Set channel filter=0.000000e+000 result=40 02:48:49 Config A/D Result=40 02:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:48:49 Get A/D filter: -9.255963e+061 result=40 02:48:49 Get A/D value=-858993460 result=40 02:48:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:48:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:48:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:48:49 Aux= 02:48:49 Message to Camera, serial 128364 queued 02:49:26 Received message from Master: op=PointingHead serial=128377 02:49:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:49:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:49:26 Point started: ret=0 02:49:26 point_skyscan result=0 02:49:27 Check angles 02:49:27 SkyScan query 02:49:27 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 02:49:27 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 02:49:27 Check angles 02:49:27 SkyScan query 02:49:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:49:28 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:49:28 Message to Master queued w/err=0: serial=128377 error=0 02:49:33 Received message from Master: op=Filter serial=128378 02:49:33 Color wheel filter change from 0 to 0 02:49:33 FLIGetFilterPos err=0 currentPosition=0 02:49:33 FLIGetStepsRemaining err=0 RemainingSteps=0 02:49:33 Filter is already there-color wheel unchanged 02:49:33 Received message from Master: op=Shutter serial=128379 02:49:33 Shutter LASER open 02:49:33 Received message from Camera: op=State serial=128381 02:49:33 GetSingleValue result=40 Value=cccccccc 02:49:33 SkyScan query 02:49:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:49:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:34 Parameters OK 02:49:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:34 Set A/D data flow result=40 02:49:34 Set A/D channel type result=40 02:49:34 Set A/D encoding result=40 02:49:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:34 Set channel filter=0.000000e+000 result=40 02:49:34 Config A/D Result=40 02:49:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:34 Get A/D filter: -9.255963e+061 result=40 02:49:34 Get A/D value=-858993460 result=40 02:49:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:34 Parameters OK 02:49:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:34 Set A/D data flow result=40 02:49:34 Set A/D channel type result=40 02:49:34 Set A/D encoding result=40 02:49:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:34 Set channel filter=0.000000e+000 result=40 02:49:34 Config A/D Result=40 02:49:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:34 Get A/D filter: -9.255963e+061 result=40 02:49:34 Get A/D value=-858993460 result=40 02:49:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:49:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:49:34 Aux= 02:49:34 Message to Camera, serial 128381 queued 02:49:42 Received message from Master: op=Shutter serial=128391 02:49:42 Shutter LASER close 02:49:43 Received message from Master: op=PointingHead serial=128395 02:49:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:49:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:49:43 Point started: ret=0 02:49:43 point_skyscan result=0 02:49:44 Check angles 02:49:44 SkyScan query 02:49:45 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.07<-21538 Statuses=0009 0009 02:49:45 Msec=0 True Az=136.14 Ze=-143.07 Az status=0009 Ze status=0009 02:49:45 Check angles 02:49:45 SkyScan query 02:49:45 SkyScan query done: ret=0 az=154.005<-10267 ze=-121.68<-20112 Statuses=0009 0009 02:49:45 Msec=750 True Az=154.005 Ze=-121.68 Az status=0009 Ze status=0009 02:49:46 Check angles 02:49:46 SkyScan query 02:49:46 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.68<-18712 Statuses=0009 0009 02:49:46 Msec=1500 True Az=171.435 Ze=-100.68 Az status=0009 Ze status=0009 02:49:46 Check angles 02:49:46 SkyScan query 02:49:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.785<-17319 Statuses=0008 0009 02:49:47 Msec=2250 True Az=176.01 Ze=-79.785 Az status=0008 Ze status=0009 02:49:47 Check angles 02:49:47 SkyScan query 02:49:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.365<-15891 Statuses=0008 0009 02:49:48 Msec=3000 True Az=176.01 Ze=-58.365 Az status=0008 Ze status=0009 02:49:48 Check angles 02:49:48 SkyScan query 02:49:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:49:48 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:49:48 Message to Master queued w/err=0: serial=128395 error=0 02:49:53 Received message from Master: op=Filter serial=128396 02:49:53 Color wheel filter change from 0 to 0 02:49:53 FLIGetFilterPos err=0 currentPosition=0 02:49:53 FLIGetStepsRemaining err=0 RemainingSteps=0 02:49:53 Filter is already there-color wheel unchanged 02:49:54 Received message from Master: op=Shutter serial=128397 02:49:54 Shutter LASER close 02:49:54 Received message from Camera: op=State serial=128399 02:49:54 GetSingleValue result=40 Value=cccccccc 02:49:54 SkyScan query 02:49:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:49:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:54 Parameters OK 02:49:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:54 Set A/D data flow result=40 02:49:54 Set A/D channel type result=40 02:49:54 Set A/D encoding result=40 02:49:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:54 Set channel filter=0.000000e+000 result=40 02:49:54 Config A/D Result=40 02:49:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:54 Get A/D filter: -9.255963e+061 result=40 02:49:54 Get A/D value=-858993460 result=40 02:49:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:54 Parameters OK 02:49:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:54 Set A/D data flow result=40 02:49:54 Set A/D channel type result=40 02:49:54 Set A/D encoding result=40 02:49:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:54 Set channel filter=0.000000e+000 result=40 02:49:54 Config A/D Result=40 02:49:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:54 Get A/D filter: -9.255963e+061 result=40 02:49:54 Get A/D value=-858993460 result=40 02:49:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:49:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:49:54 Aux= 02:49:54 Message to Camera, serial 128399 queued 02:50:30 Received message from Master: op=PointingHead serial=128411 02:50:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:50:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:50:31 Point started: ret=0 02:50:31 point_skyscan result=0 02:50:31 Check angles 02:50:31 SkyScan query 02:50:32 SkyScan query done: ret=0 az=152.7<-10180 ze=-21.375<-13425 Statuses=0009 0009 02:50:32 Msec=0 True Az=152.7 Ze=-21.375 Az status=0009 Ze status=0009 02:50:32 Check angles 02:50:32 SkyScan query 02:50:33 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.39<-12026 Statuses=0009 0009 02:50:33 Msec=750 True Az=135.27 Ze=-0.39 Az status=0009 Ze status=0009 02:50:33 Check angles 02:50:33 SkyScan query 02:50:33 SkyScan query done: ret=0 az=117.75<-7850 ze=20.535<-10631 Statuses=0009 0009 02:50:33 Msec=1500 True Az=117.75 Ze=20.535 Az status=0009 Ze status=0009 02:50:34 Check angles 02:50:34 SkyScan query 02:50:34 SkyScan query done: ret=0 az=100.32<-6688 ze=41.535<-9231 Statuses=0009 0009 02:50:34 Msec=2250 True Az=100.32 Ze=41.535 Az status=0009 Ze status=0009 02:50:34 Check angles 02:50:34 SkyScan query 02:50:35 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 02:50:35 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 02:50:35 Check angles 02:50:35 SkyScan query 02:50:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:50:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:50:36 Message to Master queued w/err=0: serial=128411 error=0 02:50:41 Received message from Master: op=Filter serial=128412 02:50:41 Color wheel filter change from 0 to 0 02:50:41 FLIGetFilterPos err=0 currentPosition=0 02:50:41 FLIGetStepsRemaining err=0 RemainingSteps=0 02:50:41 Filter is already there-color wheel unchanged 02:50:41 Received message from Master: op=Shutter serial=128413 02:50:41 Shutter LASER close 02:50:41 Received message from Camera: op=State serial=128415 02:50:41 GetSingleValue result=40 Value=cccccccc 02:50:41 SkyScan query 02:50:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:50:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:42 Parameters OK 02:50:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:42 Set A/D data flow result=40 02:50:42 Set A/D channel type result=40 02:50:42 Set A/D encoding result=40 02:50:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:42 Set channel filter=0.000000e+000 result=40 02:50:42 Config A/D Result=40 02:50:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:42 Get A/D filter: -9.255963e+061 result=40 02:50:42 Get A/D value=-858993460 result=40 02:50:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:42 Parameters OK 02:50:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:42 Set A/D data flow result=40 02:50:42 Set A/D channel type result=40 02:50:42 Set A/D encoding result=40 02:50:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:42 Set channel filter=0.000000e+000 result=40 02:50:42 Config A/D Result=40 02:50:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:42 Get A/D filter: -9.255963e+061 result=40 02:50:42 Get A/D value=-858993460 result=40 02:50:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:50:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:50:42 Aux= 02:50:42 Message to Camera, serial 128415 queued 02:51:19 Received message from Master: op=PointingHead serial=128428 02:51:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:51:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:51:19 Point started: ret=0 02:51:19 point_skyscan result=0 02:51:20 Check angles 02:51:20 SkyScan query 02:51:20 SkyScan query done: ret=0 az=85.995<-5733 ze=21.195<-10587 Statuses=0008 0009 02:51:20 Msec=0 True Az=85.995 Ze=21.195 Az status=0008 Ze status=0009 02:51:20 Check angles 02:51:20 SkyScan query 02:51:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-0.24<-12016 Statuses=0008 0009 02:51:21 Msec=750 True Az=85.995 Ze=-0.24 Az status=0008 Ze status=0009 02:51:21 Check angles 02:51:21 SkyScan query 02:51:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.12<-13408 Statuses=0008 0009 02:51:22 Msec=1500 True Az=85.995 Ze=-21.12 Az status=0008 Ze status=0009 02:51:22 Check angles 02:51:22 SkyScan query 02:51:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.135<-14809 Statuses=0008 0009 02:51:22 Msec=2250 True Az=85.995 Ze=-42.135 Az status=0008 Ze status=0009 02:51:23 Check angles 02:51:23 SkyScan query 02:51:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 02:51:23 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 02:51:23 Message to Master queued w/err=0: serial=128428 error=0 02:51:28 Received message from Master: op=Filter serial=128429 02:51:28 Color wheel filter change from 0 to 0 02:51:28 FLIGetFilterPos err=0 currentPosition=0 02:51:28 FLIGetStepsRemaining err=0 RemainingSteps=0 02:51:28 Filter is already there-color wheel unchanged 02:51:28 Received message from Master: op=Shutter serial=128430 02:51:28 Shutter LASER close 02:51:28 Received message from Camera: op=State serial=128432 02:51:28 GetSingleValue result=40 Value=cccccccc 02:51:28 SkyScan query 02:51:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:51:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:29 Parameters OK 02:51:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:29 Set A/D data flow result=40 02:51:29 Set A/D channel type result=40 02:51:29 Set A/D encoding result=40 02:51:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:29 Set channel filter=0.000000e+000 result=40 02:51:29 Config A/D Result=40 02:51:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:29 Get A/D filter: -9.255963e+061 result=40 02:51:29 Get A/D value=-858993460 result=40 02:51:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:29 Parameters OK 02:51:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:29 Set A/D data flow result=40 02:51:29 Set A/D channel type result=40 02:51:29 Set A/D encoding result=40 02:51:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:29 Set channel filter=0.000000e+000 result=40 02:51:29 Config A/D Result=40 02:51:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:29 Get A/D filter: -9.255963e+061 result=40 02:51:29 Get A/D value=-858993460 result=40 02:51:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:51:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:51:29 Aux= 02:51:29 Message to Camera, serial 128432 queued 02:52:06 Received message from Master: op=PointingHead serial=128445 02:52:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:52:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:52:06 Point started: ret=0 02:52:06 point_skyscan result=0 02:52:07 Check angles 02:52:07 SkyScan query 02:52:08 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.57<-17438 Statuses=0009 0009 02:52:08 Msec=0 True Az=109.215 Ze=-81.57 Az status=0009 Ze status=0009 02:52:08 Check angles 02:52:08 SkyScan query 02:52:08 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.495<-18833 Statuses=0008 0009 02:52:08 Msec=750 True Az=112.98 Ze=-102.495 Az status=0008 Ze status=0009 02:52:08 Check angles 02:52:08 SkyScan query 02:52:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.465<-20231 Statuses=0008 0009 02:52:09 Msec=1500 True Az=112.995 Ze=-123.465 Az status=0008 Ze status=0009 02:52:09 Check angles 02:52:09 SkyScan query 02:52:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 02:52:10 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 02:52:10 Check angles 02:52:10 SkyScan query 02:52:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.36<-23024 Statuses=0008 0009 02:52:11 Msec=3000 True Az=112.995 Ze=-165.36 Az status=0008 Ze status=0009 02:52:11 Check angles 02:52:11 SkyScan query 02:52:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:52:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:52:11 Message to Master queued w/err=0: serial=128445 error=0 02:52:16 Received message from Master: op=Filter serial=128446 02:52:16 Color wheel filter change from 0 to 0 02:52:16 FLIGetFilterPos err=0 currentPosition=0 02:52:16 FLIGetStepsRemaining err=0 RemainingSteps=0 02:52:16 Filter is already there-color wheel unchanged 02:52:16 Received message from Master: op=Shutter serial=128447 02:52:16 Shutter LASER open 02:52:17 Received message from Camera: op=State serial=128449 02:52:17 GetSingleValue result=40 Value=cccccccc 02:52:17 SkyScan query 02:52:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:52:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:17 Parameters OK 02:52:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:17 Set A/D data flow result=40 02:52:17 Set A/D channel type result=40 02:52:17 Set A/D encoding result=40 02:52:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:17 Set channel filter=0.000000e+000 result=40 02:52:17 Config A/D Result=40 02:52:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:17 Get A/D filter: -9.255963e+061 result=40 02:52:17 Get A/D value=-858993460 result=40 02:52:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:17 Parameters OK 02:52:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:17 Set A/D data flow result=40 02:52:17 Set A/D channel type result=40 02:52:17 Set A/D encoding result=40 02:52:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:17 Set channel filter=0.000000e+000 result=40 02:52:17 Config A/D Result=40 02:52:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:17 Get A/D filter: -9.255963e+061 result=40 02:52:17 Get A/D value=-858993460 result=40 02:52:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:52:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:52:17 Aux= 02:52:17 Message to Camera, serial 128449 queued 02:52:26 Received message from Master: op=Shutter serial=128459 02:52:26 Shutter LASER close 02:52:26 Received message from Master: op=PointingHead serial=128463 02:52:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:52:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:52:26 Point started: ret=0 02:52:26 point_skyscan result=0 02:52:27 Check angles 02:52:27 SkyScan query 02:52:28 SkyScan query done: ret=0 az=90.135<-6009 ze=157.485<-1501 Statuses=0009 0009 02:52:28 Msec=0 True Az=90.135 Ze=157.485 Az status=0009 Ze status=0009 02:52:28 Check angles 02:52:28 SkyScan query 02:52:29 SkyScan query done: ret=0 az=72.675<-4845 ze=136.47<-2902 Statuses=0009 0009 02:52:29 Msec=750 True Az=72.675 Ze=136.47 Az status=0009 Ze status=0009 02:52:29 Check angles 02:52:29 SkyScan query 02:52:29 SkyScan query done: ret=0 az=55.26<-3684 ze=115.575<-4295 Statuses=0009 0009 02:52:29 Msec=1500 True Az=55.26 Ze=115.575 Az status=0009 Ze status=0009 02:52:29 Check angles 02:52:29 SkyScan query 02:52:30 SkyScan query done: ret=0 az=41.01<-2734 ze=94.605<-5693 Statuses=0009 0009 02:52:30 Msec=2250 True Az=41.01 Ze=94.605 Az status=0009 Ze status=0009 02:52:30 Check angles 02:52:30 SkyScan query 02:52:31 SkyScan query done: ret=0 az=40.995<-2733 ze=73.68<-7088 Statuses=0008 0009 02:52:31 Msec=3000 True Az=40.995 Ze=73.68 Az status=0008 Ze status=0009 02:52:31 Check angles 02:52:31 SkyScan query 02:52:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.98<-8468 Statuses=0008 0009 02:52:32 Msec=3750 True Az=40.995 Ze=52.98 Az status=0008 Ze status=0009 02:52:32 Check angles 02:52:32 SkyScan query 02:52:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:52:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:52:32 Message to Master queued w/err=0: serial=128463 error=0 02:52:37 Received message from Master: op=Filter serial=128464 02:52:37 Color wheel filter change from 0 to 0 02:52:37 FLIGetFilterPos err=0 currentPosition=0 02:52:37 FLIGetStepsRemaining err=0 RemainingSteps=0 02:52:37 Filter is already there-color wheel unchanged 02:52:37 Received message from Master: op=Shutter serial=128465 02:52:37 Shutter LASER close 02:52:38 Received message from Camera: op=State serial=128467 02:52:38 GetSingleValue result=40 Value=cccccccc 02:52:38 SkyScan query 02:52:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:52:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:38 Parameters OK 02:52:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:38 Set A/D data flow result=40 02:52:38 Set A/D channel type result=40 02:52:38 Set A/D encoding result=40 02:52:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:38 Set channel filter=0.000000e+000 result=40 02:52:38 Config A/D Result=40 02:52:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:38 Get A/D filter: -9.255963e+061 result=40 02:52:38 Get A/D value=-858993460 result=40 02:52:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:38 Parameters OK 02:52:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:38 Set A/D data flow result=40 02:52:38 Set A/D channel type result=40 02:52:38 Set A/D encoding result=40 02:52:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:38 Set channel filter=0.000000e+000 result=40 02:52:38 Config A/D Result=40 02:52:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:38 Get A/D filter: -9.255963e+061 result=40 02:52:38 Get A/D value=-858993460 result=40 02:52:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:52:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:52:38 Aux= 02:52:38 Message to Camera, serial 128467 queued 02:53:15 Received message from Master: op=PointingHead serial=128480 02:53:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:53:15 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:53:15 Point started: ret=0 02:53:15 point_skyscan result=0 02:53:16 Check angles 02:53:16 SkyScan query 02:53:17 SkyScan query done: ret=0 az=40.995<-2733 ze=21.51<-10566 Statuses=0008 0009 02:53:17 Msec=0 True Az=40.995 Ze=21.51 Az status=0008 Ze status=0009 02:53:17 Check angles 02:53:17 SkyScan query 02:53:18 SkyScan query done: ret=0 az=40.995<-2733 ze=0.54<-11964 Statuses=0008 0009 02:53:18 Msec=750 True Az=40.995 Ze=0.54 Az status=0008 Ze status=0009 02:53:18 Check angles 02:53:18 SkyScan query 02:53:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.4<-13360 Statuses=0008 0009 02:53:18 Msec=1500 True Az=40.995 Ze=-20.4 Az status=0008 Ze status=0009 02:53:18 Check angles 02:53:18 SkyScan query 02:53:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 02:53:19 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 02:53:19 Check angles 02:53:19 SkyScan query 02:53:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:53:20 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:53:20 Message to Master queued w/err=0: serial=128480 error=0 02:53:25 Received message from Master: op=Filter serial=128481 02:53:25 Color wheel filter change from 0 to 0 02:53:25 FLIGetFilterPos err=0 currentPosition=0 02:53:25 FLIGetStepsRemaining err=0 RemainingSteps=0 02:53:25 Filter is already there-color wheel unchanged 02:53:25 Received message from Master: op=Shutter serial=128482 02:53:25 Shutter LASER close 02:53:25 Received message from Camera: op=State serial=128484 02:53:25 GetSingleValue result=40 Value=cccccccc 02:53:25 SkyScan query 02:53:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:53:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:53:26 Parameters OK 02:53:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:53:26 Set A/D data flow result=40 02:53:26 Set A/D channel type result=40 02:53:26 Set A/D encoding result=40 02:53:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:53:26 Set channel filter=0.000000e+000 result=40 02:53:26 Config A/D Result=40 02:53:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:53:26 Get A/D filter: -9.255963e+061 result=40 02:53:26 Get A/D value=-858993460 result=40 02:53:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:53:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:53:26 Parameters OK 02:53:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:53:26 Set A/D data flow result=40 02:53:26 Set A/D channel type result=40 02:53:26 Set A/D encoding result=40 02:53:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:53:26 Set channel filter=0.000000e+000 result=40 02:53:26 Config A/D Result=40 02:53:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:53:26 Get A/D filter: -9.255963e+061 result=40 02:53:26 Get A/D value=-858993460 result=40 02:53:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:53:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:53:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:53:26 Aux= 02:53:26 Message to Camera, serial 128484 queued 02:54:02 Received message from Master: op=PointingHead serial=128497 02:54:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:54:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:54:03 Point started: ret=0 02:54:03 point_skyscan result=0 02:54:04 Check angles 02:54:04 SkyScan query 02:54:04 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.295<-16553 Statuses=0009 0009 02:54:04 Msec=0 True Az=63.99 Ze=-68.295 Az status=0009 Ze status=0009 02:54:04 Check angles 02:54:04 SkyScan query 02:54:05 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.265<-17951 Statuses=0009 0009 02:54:05 Msec=750 True Az=81.585 Ze=-89.265 Az status=0009 Ze status=0009 02:54:05 Check angles 02:54:05 SkyScan query 02:54:06 SkyScan query done: ret=0 az=99.09<-6606 ze=-110.205<-19347 Statuses=0009 0009 02:54:06 Msec=1500 True Az=99.09 Ze=-110.205 Az status=0009 Ze status=0009 02:54:06 Check angles 02:54:06 SkyScan query 02:54:06 SkyScan query done: ret=0 az=116.49<-7766 ze=-131.16<-20744 Statuses=0009 0009 02:54:06 Msec=2250 True Az=116.49 Ze=-131.16 Az status=0009 Ze status=0009 02:54:07 Check angles 02:54:07 SkyScan query 02:54:07 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 02:54:07 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 02:54:07 Check angles 02:54:07 SkyScan query 02:54:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:54:08 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:54:08 Message to Master queued w/err=0: serial=128497 error=0 02:54:13 Received message from Master: op=Filter serial=128498 02:54:13 Color wheel filter change from 0 to 0 02:54:13 FLIGetFilterPos err=0 currentPosition=0 02:54:13 FLIGetStepsRemaining err=0 RemainingSteps=0 02:54:13 Filter is already there-color wheel unchanged 02:54:13 Received message from Master: op=Shutter serial=128499 02:54:13 Shutter LASER close 02:54:13 Received message from Camera: op=State serial=128501 02:54:13 GetSingleValue result=40 Value=cccccccc 02:54:13 SkyScan query 02:54:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:54:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:14 Parameters OK 02:54:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:14 Set A/D data flow result=40 02:54:14 Set A/D channel type result=40 02:54:14 Set A/D encoding result=40 02:54:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:14 Set channel filter=0.000000e+000 result=40 02:54:14 Config A/D Result=40 02:54:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:14 Get A/D filter: -9.255963e+061 result=40 02:54:14 Get A/D value=-858993460 result=40 02:54:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:14 Parameters OK 02:54:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:14 Set A/D data flow result=40 02:54:14 Set A/D channel type result=40 02:54:14 Set A/D encoding result=40 02:54:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:14 Set channel filter=0.000000e+000 result=40 02:54:14 Config A/D Result=40 02:54:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:14 Get A/D filter: -9.255963e+061 result=40 02:54:14 Get A/D value=-858993460 result=40 02:54:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:54:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:54:14 Aux= 02:54:14 Message to Camera, serial 128501 queued 02:54:51 Received message from Master: op=PointingHead serial=128514 02:54:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:54:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:54:51 Point started: ret=0 02:54:51 point_skyscan result=0 02:54:52 Check angles 02:54:52 SkyScan query 02:54:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 02:54:52 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 02:54:52 Check angles 02:54:52 SkyScan query 02:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:54:53 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:54:53 Message to Master queued w/err=0: serial=128514 error=0 02:54:58 Received message from Master: op=Filter serial=128515 02:54:58 Color wheel filter change from 0 to 0 02:54:58 FLIGetFilterPos err=0 currentPosition=0 02:54:58 FLIGetStepsRemaining err=0 RemainingSteps=0 02:54:58 Filter is already there-color wheel unchanged 02:54:58 Received message from Master: op=Shutter serial=128516 02:54:58 Shutter LASER open 02:54:58 Received message from Camera: op=State serial=128518 02:54:58 GetSingleValue result=40 Value=cccccccc 02:54:58 SkyScan query 02:54:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:54:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:59 Parameters OK 02:54:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:59 Set A/D data flow result=40 02:54:59 Set A/D channel type result=40 02:54:59 Set A/D encoding result=40 02:54:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:59 Set channel filter=0.000000e+000 result=40 02:54:59 Config A/D Result=40 02:54:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:59 Get A/D filter: -9.255963e+061 result=40 02:54:59 Get A/D value=-858993460 result=40 02:54:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:59 Parameters OK 02:54:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:59 Set A/D data flow result=40 02:54:59 Set A/D channel type result=40 02:54:59 Set A/D encoding result=40 02:54:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:59 Set channel filter=0.000000e+000 result=40 02:54:59 Config A/D Result=40 02:54:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:59 Get A/D filter: -9.255963e+061 result=40 02:54:59 Get A/D value=-858993460 result=40 02:54:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:54:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:54:59 Aux= 02:54:59 Message to Camera, serial 128518 queued 02:55:07 Received message from Master: op=Shutter serial=128528 02:55:07 Shutter LASER close 02:55:08 Received message from Master: op=PointingHead serial=128532 02:55:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:55:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:55:08 Point started: ret=0 02:55:08 point_skyscan result=0 02:55:09 Check angles 02:55:09 SkyScan query 02:55:10 SkyScan query done: ret=0 az=136.485<-9099 ze=-142.725<-21515 Statuses=0009 0009 02:55:10 Msec=0 True Az=136.485 Ze=-142.725 Az status=0009 Ze status=0009 02:55:10 Check angles 02:55:10 SkyScan query [UTC 2018-12-14 02:55:10] 02:55:10 SkyScan query done: ret=0 az=154.26<-10284 ze=-121.365<-20091 Statuses=0009 0009 02:55:10 Msec=750 True Az=154.26 Ze=-121.365 Az status=0009 Ze status=0009 02:55:11 Check angles 02:55:11 SkyScan query 02:55:11 SkyScan query done: ret=0 az=171.72<-11448 ze=-100.32<-18688 Statuses=0009 0009 02:55:11 Msec=1500 True Az=171.72 Ze=-100.32 Az status=0009 Ze status=0009 02:55:11 Check angles 02:55:11 SkyScan query 02:55:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.29<-17286 Statuses=0008 0009 02:55:12 Msec=2250 True Az=176.01 Ze=-79.29 Az status=0008 Ze status=0009 02:55:12 Check angles 02:55:12 SkyScan query 02:55:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.425<-15895 Statuses=0008 0009 02:55:13 Msec=3000 True Az=176.01 Ze=-58.425 Az status=0008 Ze status=0009 02:55:13 Check angles 02:55:13 SkyScan query 02:55:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:55:13 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:55:13 Message to Master queued w/err=0: serial=128532 error=0 02:55:18 Received message from Master: op=Filter serial=128533 02:55:18 Color wheel filter change from 0 to 0 02:55:18 FLIGetFilterPos err=0 currentPosition=0 02:55:18 FLIGetStepsRemaining err=0 RemainingSteps=0 02:55:18 Filter is already there-color wheel unchanged 02:55:19 Received message from Master: op=Shutter serial=128534 02:55:19 Shutter LASER close 02:55:19 Received message from Camera: op=State serial=128536 02:55:19 GetSingleValue result=40 Value=cccccccc 02:55:19 SkyScan query 02:55:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:55:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:55:19 Parameters OK 02:55:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:55:19 Set A/D data flow result=40 02:55:19 Set A/D channel type result=40 02:55:19 Set A/D encoding result=40 02:55:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:55:19 Set channel filter=0.000000e+000 result=40 02:55:19 Config A/D Result=40 02:55:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:55:19 Get A/D filter: -9.255963e+061 result=40 02:55:19 Get A/D value=-858993460 result=40 02:55:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:55:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:55:19 Parameters OK 02:55:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:55:19 Set A/D data flow result=40 02:55:19 Set A/D channel type result=40 02:55:19 Set A/D encoding result=40 02:55:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:55:19 Set channel filter=0.000000e+000 result=40 02:55:19 Config A/D Result=40 02:55:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:55:19 Get A/D filter: -9.255963e+061 result=40 02:55:19 Get A/D value=-858993460 result=40 02:55:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:55:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:55:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:55:19 Aux= 02:55:19 Message to Camera, serial 128536 queued [UTC 2018-12-14 02:55:52] 02:55:56 Received message from Master: op=PointingHead serial=128549 02:55:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:55:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:55:57 Point started: ret=0 02:55:57 point_skyscan result=0 02:55:57 Check angles 02:55:57 SkyScan query 02:55:58 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.345<-13423 Statuses=0009 0009 02:55:58 Msec=0 True Az=152.715 Ze=-21.345 Az status=0009 Ze status=0009 02:55:58 Check angles 02:55:58 SkyScan query 02:55:59 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.345<-12023 Statuses=0009 0009 02:55:59 Msec=750 True Az=135.135 Ze=-0.345 Az status=0009 Ze status=0009 02:55:59 Check angles 02:55:59 SkyScan query 02:55:59 SkyScan query done: ret=0 az=117.57<-7838 ze=20.55<-10630 Statuses=0009 0009 02:55:59 Msec=1500 True Az=117.57 Ze=20.55 Az status=0009 Ze status=0009 02:56:00 Check angles 02:56:00 SkyScan query 02:56:00 SkyScan query done: ret=0 az=99.945<-6663 ze=42.015<-9199 Statuses=0009 0009 02:56:00 Msec=2250 True Az=99.945 Ze=42.015 Az status=0009 Ze status=0009 02:56:00 Check angles 02:56:00 SkyScan query 02:56:01 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 02:56:01 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 02:56:01 Check angles 02:56:01 SkyScan query 02:56:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:56:02 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:56:02 Message to Master queued w/err=0: serial=128549 error=0 02:56:07 Received message from Master: op=Filter serial=128550 02:56:07 Color wheel filter change from 0 to 0 02:56:07 FLIGetFilterPos err=0 currentPosition=0 02:56:07 FLIGetStepsRemaining err=0 RemainingSteps=0 02:56:07 Filter is already there-color wheel unchanged 02:56:07 Received message from Master: op=Shutter serial=128551 02:56:07 Shutter LASER close 02:56:07 Received message from Camera: op=State serial=128553 02:56:07 GetSingleValue result=40 Value=cccccccc 02:56:07 SkyScan query 02:56:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:56:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:07 Parameters OK 02:56:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:07 Set A/D data flow result=40 02:56:07 Set A/D channel type result=40 02:56:07 Set A/D encoding result=40 02:56:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:07 Set channel filter=0.000000e+000 result=40 02:56:07 Config A/D Result=40 02:56:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:07 Get A/D filter: -9.255963e+061 result=40 02:56:07 Get A/D value=-858993460 result=40 02:56:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:07 Parameters OK 02:56:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:07 Set A/D data flow result=40 02:56:07 Set A/D channel type result=40 02:56:07 Set A/D encoding result=40 02:56:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:07 Set channel filter=0.000000e+000 result=40 02:56:07 Config A/D Result=40 02:56:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:07 Get A/D filter: -9.255963e+061 result=40 02:56:07 Get A/D value=-858993460 result=40 02:56:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:56:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:56:07 Aux= 02:56:07 Message to Camera, serial 128553 queued 02:56:44 Received message from Master: op=PointingHead serial=128566 02:56:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:56:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:56:45 Point started: ret=0 02:56:45 point_skyscan result=0 02:56:45 Check angles 02:56:45 SkyScan query 02:56:46 SkyScan query done: ret=0 az=85.995<-5733 ze=21.78<-10548 Statuses=0008 0009 02:56:46 Msec=0 True Az=85.995 Ze=21.78 Az status=0008 Ze status=0009 02:56:46 Check angles 02:56:46 SkyScan query 02:56:47 SkyScan query done: ret=0 az=85.995<-5733 ze=0.39<-11974 Statuses=0008 0009 02:56:47 Msec=750 True Az=85.995 Ze=0.39 Az status=0008 Ze status=0009 02:56:47 Check angles 02:56:47 SkyScan query 02:56:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.955<-13397 Statuses=0008 0009 02:56:48 Msec=1500 True Az=85.995 Ze=-20.955 Az status=0008 Ze status=0009 02:56:48 Check angles 02:56:48 SkyScan query 02:56:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.94<-14796 Statuses=0008 0009 02:56:48 Msec=2250 True Az=85.995 Ze=-41.94 Az status=0008 Ze status=0009 02:56:49 Check angles 02:56:49 SkyScan query 02:56:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0008 0008 02:56:49 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0008 Ze status=0008 02:56:49 Message to Master queued w/err=0: serial=128566 error=0 02:56:54 Received message from Master: op=Filter serial=128567 02:56:54 Color wheel filter change from 0 to 0 02:56:54 FLIGetFilterPos err=0 currentPosition=0 02:56:54 FLIGetStepsRemaining err=0 RemainingSteps=0 02:56:54 Filter is already there-color wheel unchanged 02:56:54 Received message from Master: op=Shutter serial=128568 02:56:54 Shutter LASER close 02:56:54 Received message from Camera: op=State serial=128570 02:56:54 GetSingleValue result=40 Value=cccccccc 02:56:54 SkyScan query 02:56:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:56:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:55 Parameters OK 02:56:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:55 Set A/D data flow result=40 02:56:55 Set A/D channel type result=40 02:56:55 Set A/D encoding result=40 02:56:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:55 Set channel filter=0.000000e+000 result=40 02:56:55 Config A/D Result=40 02:56:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:55 Get A/D filter: -9.255963e+061 result=40 02:56:55 Get A/D value=-858993460 result=40 02:56:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:55 Parameters OK 02:56:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:55 Set A/D data flow result=40 02:56:55 Set A/D channel type result=40 02:56:55 Set A/D encoding result=40 02:56:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:55 Set channel filter=0.000000e+000 result=40 02:56:55 Config A/D Result=40 02:56:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:55 Get A/D filter: -9.255963e+061 result=40 02:56:55 Get A/D value=-858993460 result=40 02:56:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:56:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:56:55 Aux= 02:56:55 Message to Camera, serial 128570 queued 02:57:32 Received message from Master: op=PointingHead serial=128583 02:57:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:57:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:57:32 Point started: ret=0 02:57:32 point_skyscan result=0 02:57:33 Check angles 02:57:33 SkyScan query 02:57:33 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.12<-17408 Statuses=0009 0009 02:57:33 Msec=0 True Az=108.825 Ze=-81.12 Az status=0009 Ze status=0009 02:57:34 Check angles 02:57:34 SkyScan query 02:57:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 02:57:34 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 02:57:34 Check angles 02:57:34 SkyScan query 02:57:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.045<-20203 Statuses=0008 0009 02:57:35 Msec=1500 True Az=112.995 Ze=-123.045 Az status=0008 Ze status=0009 02:57:35 Check angles 02:57:35 SkyScan query 02:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144<-21600 Statuses=0008 0009 02:57:36 Msec=2250 True Az=112.995 Ze=-144 Az status=0008 Ze status=0009 02:57:36 Check angles 02:57:36 SkyScan query 02:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.97<-22998 Statuses=0008 0009 02:57:36 Msec=3000 True Az=112.995 Ze=-164.97 Az status=0008 Ze status=0009 02:57:37 Check angles 02:57:37 SkyScan query 02:57:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:57:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:57:37 Message to Master queued w/err=0: serial=128583 error=0 02:57:42 Received message from Master: op=Filter serial=128584 02:57:42 Color wheel filter change from 0 to 0 02:57:42 FLIGetFilterPos err=0 currentPosition=0 02:57:42 FLIGetStepsRemaining err=0 RemainingSteps=0 02:57:42 Filter is already there-color wheel unchanged 02:57:42 Received message from Master: op=Shutter serial=128585 02:57:42 Shutter LASER open 02:57:42 Received message from Camera: op=State serial=128587 02:57:42 GetSingleValue result=40 Value=cccccccc 02:57:42 SkyScan query 02:57:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:57:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:43 Parameters OK 02:57:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:43 Set A/D data flow result=40 02:57:43 Set A/D channel type result=40 02:57:43 Set A/D encoding result=40 02:57:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:43 Set channel filter=0.000000e+000 result=40 02:57:43 Config A/D Result=40 02:57:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:43 Get A/D filter: -9.255963e+061 result=40 02:57:43 Get A/D value=-858993460 result=40 02:57:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:43 Parameters OK 02:57:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:43 Set A/D data flow result=40 02:57:43 Set A/D channel type result=40 02:57:43 Set A/D encoding result=40 02:57:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:43 Set channel filter=0.000000e+000 result=40 02:57:43 Config A/D Result=40 02:57:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:43 Get A/D filter: -9.255963e+061 result=40 02:57:43 Get A/D value=-858993460 result=40 02:57:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:57:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:57:43 Aux= 02:57:43 Message to Camera, serial 128587 queued 02:57:51 Received message from Master: op=Shutter serial=128597 02:57:51 Shutter LASER close 02:57:52 Received message from Master: op=PointingHead serial=128601 02:57:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:57:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:57:52 Point started: ret=0 02:57:52 point_skyscan result=0 02:57:53 Check angles 02:57:53 SkyScan query 02:57:54 SkyScan query done: ret=0 az=90.15<-6010 ze=157.545<-1497 Statuses=0009 0009 02:57:54 Msec=0 True Az=90.15 Ze=157.545 Az status=0009 Ze status=0009 02:57:54 Check angles 02:57:54 SkyScan query 02:57:54 SkyScan query done: ret=0 az=72.78<-4852 ze=136.56<-2896 Statuses=0009 0009 02:57:54 Msec=750 True Az=72.78 Ze=136.56 Az status=0009 Ze status=0009 02:57:55 Check angles 02:57:55 SkyScan query 02:57:55 SkyScan query done: ret=0 az=55.35<-3690 ze=115.665<-4289 Statuses=0009 0009 02:57:55 Msec=1500 True Az=55.35 Ze=115.665 Az status=0009 Ze status=0009 02:57:55 Check angles 02:57:55 SkyScan query 02:57:56 SkyScan query done: ret=0 az=40.965<-2731 ze=94.65<-5690 Statuses=0009 0009 02:57:56 Msec=2250 True Az=40.965 Ze=94.65 Az status=0009 Ze status=0009 02:57:56 Check angles 02:57:56 SkyScan query 02:57:57 SkyScan query done: ret=0 az=40.995<-2733 ze=73.77<-7082 Statuses=0008 0009 02:57:57 Msec=3000 True Az=40.995 Ze=73.77 Az status=0008 Ze status=0009 02:57:57 Check angles 02:57:57 SkyScan query 02:57:57 SkyScan query done: ret=0 az=40.995<-2733 ze=53.025<-8465 Statuses=0008 0009 02:57:57 Msec=3750 True Az=40.995 Ze=53.025 Az status=0008 Ze status=0009 02:57:58 Check angles 02:57:58 SkyScan query 02:57:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:57:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:57:58 Message to Master queued w/err=0: serial=128601 error=0 02:58:03 Received message from Master: op=Filter serial=128602 02:58:03 Color wheel filter change from 0 to 0 02:58:03 FLIGetFilterPos err=0 currentPosition=0 02:58:03 FLIGetStepsRemaining err=0 RemainingSteps=0 02:58:03 Filter is already there-color wheel unchanged 02:58:03 Received message from Master: op=Shutter serial=128603 02:58:03 Shutter LASER close 02:58:03 Received message from Camera: op=State serial=128605 02:58:03 GetSingleValue result=40 Value=cccccccc 02:58:03 SkyScan query 02:58:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:58:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:04 Parameters OK 02:58:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:04 Set A/D data flow result=40 02:58:04 Set A/D channel type result=40 02:58:04 Set A/D encoding result=40 02:58:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:04 Set channel filter=0.000000e+000 result=40 02:58:04 Config A/D Result=40 02:58:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:04 Get A/D filter: -9.255963e+061 result=40 02:58:04 Get A/D value=-858993460 result=40 02:58:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:04 Parameters OK 02:58:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:04 Set A/D data flow result=40 02:58:04 Set A/D channel type result=40 02:58:04 Set A/D encoding result=40 02:58:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:04 Set channel filter=0.000000e+000 result=40 02:58:04 Config A/D Result=40 02:58:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:04 Get A/D filter: -9.255963e+061 result=40 02:58:04 Get A/D value=-858993460 result=40 02:58:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:58:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:58:04 Aux= 02:58:04 Message to Camera, serial 128605 queued 02:58:41 Received message from Master: op=PointingHead serial=128618 02:58:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:58:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:58:41 Point started: ret=0 02:58:41 point_skyscan result=0 02:58:42 Check angles 02:58:42 SkyScan query 02:58:43 SkyScan query done: ret=0 az=40.995<-2733 ze=21.435<-10571 Statuses=0008 0009 02:58:43 Msec=0 True Az=40.995 Ze=21.435 Az status=0008 Ze status=0009 02:58:43 Check angles 02:58:43 SkyScan query 02:58:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-0<-12000 Statuses=0008 0009 02:58:43 Msec=750 True Az=40.995 Ze=-0 Az status=0008 Ze status=0009 02:58:44 Check angles 02:58:44 SkyScan query 02:58:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.91<-13394 Statuses=0008 0009 02:58:44 Msec=1500 True Az=40.995 Ze=-20.91 Az status=0008 Ze status=0009 02:58:44 Check angles 02:58:44 SkyScan query 02:58:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 02:58:45 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 02:58:45 Check angles 02:58:45 SkyScan query 02:58:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 02:58:46 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 02:58:46 Message to Master queued w/err=0: serial=128618 error=0 02:58:51 Received message from Master: op=Filter serial=128619 02:58:51 Color wheel filter change from 0 to 0 02:58:51 FLIGetFilterPos err=0 currentPosition=0 02:58:51 FLIGetStepsRemaining err=0 RemainingSteps=0 02:58:51 Filter is already there-color wheel unchanged 02:58:51 Received message from Master: op=Shutter serial=128620 02:58:51 Shutter LASER close 02:58:51 Received message from Camera: op=State serial=128622 02:58:51 GetSingleValue result=40 Value=cccccccc 02:58:51 SkyScan query 02:58:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:58:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:52 Parameters OK 02:58:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:52 Set A/D data flow result=40 02:58:52 Set A/D channel type result=40 02:58:52 Set A/D encoding result=40 02:58:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:52 Set channel filter=0.000000e+000 result=40 02:58:52 Config A/D Result=40 02:58:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:52 Get A/D filter: -9.255963e+061 result=40 02:58:52 Get A/D value=-858993460 result=40 02:58:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:52 Parameters OK 02:58:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:52 Set A/D data flow result=40 02:58:52 Set A/D channel type result=40 02:58:52 Set A/D encoding result=40 02:58:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:52 Set channel filter=0.000000e+000 result=40 02:58:52 Config A/D Result=40 02:58:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:52 Get A/D filter: -9.255963e+061 result=40 02:58:52 Get A/D value=-858993460 result=40 02:58:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:58:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:58:52 Aux= 02:58:52 Message to Camera, serial 128622 queued 02:59:28 Received message from Master: op=PointingHead serial=128635 02:59:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:59:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:59:29 Point started: ret=0 02:59:29 point_skyscan result=0 02:59:30 Check angles 02:59:30 SkyScan query 02:59:30 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.04<-16536 Statuses=0009 0009 02:59:30 Msec=0 True Az=63.78 Ze=-68.04 Az status=0009 Ze status=0009 02:59:30 Check angles 02:59:30 SkyScan query 02:59:31 SkyScan query done: ret=0 az=81.3<-5420 ze=-88.995<-17933 Statuses=0009 0009 02:59:31 Msec=750 True Az=81.3 Ze=-88.995 Az status=0009 Ze status=0009 02:59:31 Check angles 02:59:31 SkyScan query 02:59:32 SkyScan query done: ret=0 az=98.82<-6588 ze=-109.95<-19330 Statuses=0009 0009 02:59:32 Msec=1500 True Az=98.82 Ze=-109.95 Az status=0009 Ze status=0009 02:59:32 Check angles 02:59:32 SkyScan query 02:59:32 SkyScan query done: ret=0 az=116.205<-7747 ze=-130.92<-20728 Statuses=0009 0009 02:59:32 Msec=2250 True Az=116.205 Ze=-130.92 Az status=0009 Ze status=0009 02:59:33 Check angles 02:59:33 SkyScan query 02:59:33 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 02:59:33 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 02:59:33 Check angles 02:59:33 SkyScan query 02:59:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 02:59:34 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 02:59:34 Message to Master queued w/err=0: serial=128635 error=0 02:59:39 Received message from Master: op=Filter serial=128636 02:59:39 Color wheel filter change from 0 to 0 02:59:39 FLIGetFilterPos err=0 currentPosition=0 02:59:39 FLIGetStepsRemaining err=0 RemainingSteps=0 02:59:39 Filter is already there-color wheel unchanged 02:59:39 Received message from Master: op=Shutter serial=128637 02:59:39 Shutter LASER close 02:59:39 Received message from Camera: op=State serial=128639 02:59:39 GetSingleValue result=40 Value=cccccccc 02:59:39 SkyScan query 02:59:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:59:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:40 Parameters OK 02:59:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:40 Set A/D data flow result=40 02:59:40 Set A/D channel type result=40 02:59:40 Set A/D encoding result=40 02:59:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:40 Set channel filter=0.000000e+000 result=40 02:59:40 Config A/D Result=40 02:59:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:40 Get A/D filter: -9.255963e+061 result=40 02:59:40 Get A/D value=-858993460 result=40 02:59:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:40 Parameters OK 02:59:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:40 Set A/D data flow result=40 02:59:40 Set A/D channel type result=40 02:59:40 Set A/D encoding result=40 02:59:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:40 Set channel filter=0.000000e+000 result=40 02:59:40 Config A/D Result=40 02:59:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:40 Get A/D filter: -9.255963e+061 result=40 02:59:40 Get A/D value=-858993460 result=40 02:59:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:59:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:59:40 Aux= 02:59:40 Message to Camera, serial 128639 queued 03:00:17 Received message from Master: op=PointingHead serial=128652 03:00:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:00:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:00:17 Point started: ret=0 03:00:17 point_skyscan result=0 03:00:18 Check angles 03:00:18 SkyScan query 03:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0008 0009 03:00:18 Msec=0 True Az=112.995 Ze=-171.465 Az status=0008 Ze status=0009 03:00:18 Check angles 03:00:18 SkyScan query 03:00:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:00:19 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:00:19 Message to Master queued w/err=0: serial=128652 error=0 03:00:24 Received message from Master: op=Filter serial=128653 03:00:24 Color wheel filter change from 0 to 0 03:00:24 FLIGetFilterPos err=0 currentPosition=0 03:00:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:00:24 Filter is already there-color wheel unchanged 03:00:24 Received message from Master: op=Shutter serial=128654 03:00:24 Shutter LASER open 03:00:24 Received message from Camera: op=State serial=128656 03:00:24 GetSingleValue result=40 Value=cccccccc 03:00:24 SkyScan query 03:00:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:00:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:25 Parameters OK 03:00:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:25 Set A/D data flow result=40 03:00:25 Set A/D channel type result=40 03:00:25 Set A/D encoding result=40 03:00:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:25 Set channel filter=0.000000e+000 result=40 03:00:25 Config A/D Result=40 03:00:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:25 Get A/D filter: -9.255963e+061 result=40 03:00:25 Get A/D value=-858993460 result=40 03:00:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:25 Parameters OK 03:00:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:25 Set A/D data flow result=40 03:00:25 Set A/D channel type result=40 03:00:25 Set A/D encoding result=40 03:00:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:25 Set channel filter=0.000000e+000 result=40 03:00:25 Config A/D Result=40 03:00:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:25 Get A/D filter: -9.255963e+061 result=40 03:00:25 Get A/D value=-858993460 result=40 03:00:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:00:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:00:25 Aux= 03:00:25 Message to Camera, serial 128656 queued 03:00:33 Received message from Master: op=Shutter serial=128666 03:00:33 Shutter LASER close 03:00:34 Received message from Master: op=PointingHead serial=128670 03:00:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:00:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:00:34 Point started: ret=0 03:00:34 point_skyscan result=0 03:00:35 Check angles 03:00:35 SkyScan query 03:00:36 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.115<-21541 Statuses=0009 0009 03:00:36 Msec=0 True Az=136.02 Ze=-143.115 Az status=0009 Ze status=0009 03:00:36 Check angles 03:00:36 SkyScan query 03:00:36 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.13<-20142 Statuses=0009 0009 03:00:36 Msec=750 True Az=153.6 Ze=-122.13 Az status=0009 Ze status=0009 03:00:37 Check angles 03:00:37 SkyScan query 03:00:37 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.25<-18750 Statuses=0009 0009 03:00:37 Msec=1500 True Az=171.105 Ze=-101.25 Az status=0009 Ze status=0009 03:00:37 Check angles 03:00:37 SkyScan query 03:00:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.28<-17352 Statuses=0008 0009 03:00:38 Msec=2250 True Az=176.01 Ze=-80.28 Az status=0008 Ze status=0009 03:00:38 Check angles 03:00:38 SkyScan query 03:00:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.31<-15954 Statuses=0008 0009 03:00:39 Msec=3000 True Az=176.01 Ze=-59.31 Az status=0008 Ze status=0009 03:00:39 Check angles 03:00:39 SkyScan query 03:00:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:00:39 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:00:39 Message to Master queued w/err=0: serial=128670 error=0 03:00:44 Received message from Master: op=Filter serial=128671 03:00:44 Color wheel filter change from 0 to 0 03:00:44 FLIGetFilterPos err=0 currentPosition=0 03:00:44 FLIGetStepsRemaining err=0 RemainingSteps=0 03:00:44 Filter is already there-color wheel unchanged 03:00:45 Received message from Master: op=Shutter serial=128672 03:00:45 Shutter LASER close 03:00:45 Received message from Camera: op=State serial=128674 03:00:45 GetSingleValue result=40 Value=cccccccc 03:00:45 SkyScan query 03:00:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:00:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:45 Parameters OK 03:00:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:45 Set A/D data flow result=40 03:00:45 Set A/D channel type result=40 03:00:45 Set A/D encoding result=40 03:00:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:45 Set channel filter=0.000000e+000 result=40 03:00:45 Config A/D Result=40 03:00:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:45 Get A/D filter: -9.255963e+061 result=40 03:00:45 Get A/D value=-858993460 result=40 03:00:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:45 Parameters OK 03:00:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:45 Set A/D data flow result=40 03:00:45 Set A/D channel type result=40 03:00:45 Set A/D encoding result=40 03:00:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:45 Set channel filter=0.000000e+000 result=40 03:00:45 Config A/D Result=40 03:00:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:45 Get A/D filter: -9.255963e+061 result=40 03:00:45 Get A/D value=-858993460 result=40 03:00:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:00:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:00:45 Aux= 03:00:45 Message to Camera, serial 128674 queued 03:01:22 Received message from Master: op=PointingHead serial=128687 03:01:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:01:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:01:22 Point started: ret=0 03:01:22 point_skyscan result=0 03:01:23 Check angles 03:01:23 SkyScan query 03:01:24 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.375<-13425 Statuses=0009 0009 03:01:24 Msec=0 True Az=152.715 Ze=-21.375 Az status=0009 Ze status=0009 03:01:24 Check angles 03:01:24 SkyScan query 03:01:25 SkyScan query done: ret=0 az=134.775<-8985 ze=0.045<-11997 Statuses=0009 0009 03:01:25 Msec=750 True Az=134.775 Ze=0.045 Az status=0009 Ze status=0009 03:01:25 Check angles 03:01:25 SkyScan query 03:01:25 SkyScan query done: ret=0 az=117.345<-7823 ze=21<-10600 Statuses=0009 0009 03:01:25 Msec=1500 True Az=117.345 Ze=21 Az status=0009 Ze status=0009 03:01:25 Check angles 03:01:25 SkyScan query 03:01:26 SkyScan query done: ret=0 az=99.96<-6664 ze=41.985<-9201 Statuses=0009 0009 03:01:26 Msec=2250 True Az=99.96 Ze=41.985 Az status=0009 Ze status=0009 03:01:26 Check angles 03:01:26 SkyScan query 03:01:27 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 03:01:27 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 03:01:27 Check angles 03:01:27 SkyScan query 03:01:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:01:28 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:01:28 Message to Master queued w/err=0: serial=128687 error=0 03:01:33 Received message from Master: op=Filter serial=128688 03:01:33 Color wheel filter change from 0 to 0 03:01:33 FLIGetFilterPos err=0 currentPosition=0 03:01:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:01:33 Filter is already there-color wheel unchanged 03:01:33 Received message from Master: op=Shutter serial=128689 03:01:33 Shutter LASER close 03:01:33 Received message from Camera: op=State serial=128691 03:01:33 GetSingleValue result=40 Value=cccccccc 03:01:33 SkyScan query 03:01:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:01:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:33 Parameters OK 03:01:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:33 Set A/D data flow result=40 03:01:33 Set A/D channel type result=40 03:01:33 Set A/D encoding result=40 03:01:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:33 Set channel filter=0.000000e+000 result=40 03:01:33 Config A/D Result=40 03:01:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:33 Get A/D filter: -9.255963e+061 result=40 03:01:33 Get A/D value=-858993460 result=40 03:01:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:33 Parameters OK 03:01:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:33 Set A/D data flow result=40 03:01:33 Set A/D channel type result=40 03:01:33 Set A/D encoding result=40 03:01:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:33 Set channel filter=0.000000e+000 result=40 03:01:33 Config A/D Result=40 03:01:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:33 Get A/D filter: -9.255963e+061 result=40 03:01:33 Get A/D value=-858993460 result=40 03:01:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:01:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:01:33 Aux= 03:01:33 Message to Camera, serial 128691 queued 03:02:10 Received message from Master: op=PointingHead serial=128704 03:02:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:02:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:02:11 Point started: ret=0 03:02:11 point_skyscan result=0 03:02:11 Check angles 03:02:11 SkyScan query 03:02:12 SkyScan query done: ret=0 az=85.995<-5733 ze=21.21<-10586 Statuses=0008 0009 03:02:12 Msec=0 True Az=85.995 Ze=21.21 Az status=0008 Ze status=0009 03:02:12 Check angles 03:02:12 SkyScan query 03:02:13 SkyScan query done: ret=0 az=85.995<-5733 ze=0.225<-11985 Statuses=0008 0009 03:02:13 Msec=750 True Az=85.995 Ze=0.225 Az status=0008 Ze status=0009 03:02:13 Check angles 03:02:13 SkyScan query 03:02:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.685<-13379 Statuses=0008 0009 03:02:13 Msec=1500 True Az=85.995 Ze=-20.685 Az status=0008 Ze status=0009 03:02:14 Check angles 03:02:14 SkyScan query 03:02:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.655<-14777 Statuses=0008 0009 03:02:14 Msec=2250 True Az=85.995 Ze=-41.655 Az status=0008 Ze status=0009 03:02:14 Check angles 03:02:14 SkyScan query 03:02:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 03:02:15 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 03:02:15 Message to Master queued w/err=0: serial=128704 error=0 03:02:20 Received message from Master: op=Filter serial=128705 03:02:20 Color wheel filter change from 0 to 0 03:02:20 FLIGetFilterPos err=0 currentPosition=0 03:02:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:02:20 Filter is already there-color wheel unchanged 03:02:20 Received message from Master: op=Shutter serial=128706 03:02:20 Shutter LASER close 03:02:20 Received message from Camera: op=State serial=128708 03:02:20 GetSingleValue result=40 Value=cccccccc 03:02:20 SkyScan query 03:02:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:02:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:02:21 Parameters OK 03:02:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:02:21 Set A/D data flow result=40 03:02:21 Set A/D channel type result=40 03:02:21 Set A/D encoding result=40 03:02:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:02:21 Set channel filter=0.000000e+000 result=40 03:02:21 Config A/D Result=40 03:02:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:02:21 Get A/D filter: -9.255963e+061 result=40 03:02:21 Get A/D value=-858993460 result=40 03:02:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:02:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:02:21 Parameters OK 03:02:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:02:21 Set A/D data flow result=40 03:02:21 Set A/D channel type result=40 03:02:21 Set A/D encoding result=40 03:02:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:02:21 Set channel filter=0.000000e+000 result=40 03:02:21 Config A/D Result=40 03:02:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:02:21 Get A/D filter: -9.255963e+061 result=40 03:02:21 Get A/D value=-858993460 result=40 03:02:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:02:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:02:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:02:21 Aux= 03:02:21 Message to Camera, serial 128708 queued 03:02:58 Received message from Master: op=PointingHead serial=128721 03:02:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:02:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:02:58 Point started: ret=0 03:02:58 point_skyscan result=0 03:02:59 Check angles 03:02:59 SkyScan query 03:02:59 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.075<-17405 Statuses=0009 0009 03:02:59 Msec=0 True Az=108.825 Ze=-81.075 Az status=0009 Ze status=0009 03:02:59 Check angles 03:02:59 SkyScan query 03:03:00 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.015<-18801 Statuses=0008 0009 03:03:00 Msec=750 True Az=112.98 Ze=-102.015 Az status=0008 Ze status=0009 03:03:00 Check angles 03:03:00 SkyScan query 03:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.985<-20199 Statuses=0008 0009 03:03:01 Msec=1500 True Az=112.995 Ze=-122.985 Az status=0008 Ze status=0009 03:03:01 Check angles 03:03:01 SkyScan query 03:03:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 03:03:02 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 03:03:02 Check angles 03:03:02 SkyScan query 03:03:02 SkyScan query done: ret=0 az=112.98<-7532 ze=-164.895<-22993 Statuses=0008 0009 03:03:02 Msec=3000 True Az=112.98 Ze=-164.895 Az status=0008 Ze status=0009 03:03:02 Check angles 03:03:02 SkyScan query 03:03:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:03:03 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:03:03 Message to Master queued w/err=0: serial=128721 error=0 03:03:08 Received message from Master: op=Filter serial=128722 03:03:08 Color wheel filter change from 0 to 0 03:03:08 FLIGetFilterPos err=0 currentPosition=0 03:03:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:03:08 Filter is already there-color wheel unchanged 03:03:08 Received message from Master: op=Shutter serial=128723 03:03:08 Shutter LASER open 03:03:08 Received message from Camera: op=State serial=128725 03:03:08 GetSingleValue result=40 Value=cccccccc 03:03:08 SkyScan query 03:03:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:03:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:09 Parameters OK 03:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:09 Set A/D data flow result=40 03:03:09 Set A/D channel type result=40 03:03:09 Set A/D encoding result=40 03:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:09 Set channel filter=0.000000e+000 result=40 03:03:09 Config A/D Result=40 03:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:09 Get A/D filter: -9.255963e+061 result=40 03:03:09 Get A/D value=-858993460 result=40 03:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:09 Parameters OK 03:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:09 Set A/D data flow result=40 03:03:09 Set A/D channel type result=40 03:03:09 Set A/D encoding result=40 03:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:09 Set channel filter=0.000000e+000 result=40 03:03:09 Config A/D Result=40 03:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:09 Get A/D filter: -9.255963e+061 result=40 03:03:09 Get A/D value=-858993460 result=40 03:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:03:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:03:09 Aux= 03:03:09 Message to Camera, serial 128725 queued 03:03:17 Received message from Master: op=Shutter serial=128734 03:03:17 Shutter LASER close 03:03:17 Received message from Master: op=PointingHead serial=128738 03:03:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:03:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:03:17 Point started: ret=0 03:03:17 point_skyscan result=0 03:03:18 Check angles 03:03:18 SkyScan query 03:03:19 SkyScan query done: ret=0 az=89.52<-5968 ze=156.75<-1550 Statuses=0009 0009 03:03:19 Msec=0 True Az=89.52 Ze=156.75 Az status=0009 Ze status=0009 03:03:19 Check angles 03:03:19 SkyScan query 03:03:19 SkyScan query done: ret=0 az=71.985<-4799 ze=135.795<-2947 Statuses=0009 0009 03:03:19 Msec=750 True Az=71.985 Ze=135.795 Az status=0009 Ze status=0009 03:03:20 Check angles 03:03:20 SkyScan query 03:03:20 SkyScan query done: ret=0 az=54.66<-3644 ze=114.84<-4344 Statuses=0009 0009 03:03:20 Msec=1500 True Az=54.66 Ze=114.84 Az status=0009 Ze status=0009 03:03:20 Check angles 03:03:20 SkyScan query 03:03:21 SkyScan query done: ret=0 az=40.965<-2731 ze=93.885<-5741 Statuses=0009 0009 03:03:21 Msec=2250 True Az=40.965 Ze=93.885 Az status=0009 Ze status=0009 03:03:21 Check angles 03:03:21 SkyScan query 03:03:22 SkyScan query done: ret=0 az=40.995<-2733 ze=72.45<-7170 Statuses=0008 0009 03:03:22 Msec=3000 True Az=40.995 Ze=72.45 Az status=0008 Ze status=0009 03:03:22 Check angles 03:03:22 SkyScan query 03:03:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.08<-8528 Statuses=0008 0009 03:03:22 Msec=3750 True Az=40.995 Ze=52.08 Az status=0008 Ze status=0009 03:03:23 Check angles 03:03:23 SkyScan query 03:03:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:03:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:03:23 Message to Master queued w/err=0: serial=128738 error=0 03:03:28 Received message from Master: op=Filter serial=128739 03:03:28 Color wheel filter change from 0 to 0 03:03:28 FLIGetFilterPos err=0 currentPosition=0 03:03:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:03:28 Filter is already there-color wheel unchanged 03:03:28 Received message from Master: op=Shutter serial=128740 03:03:28 Shutter LASER close 03:03:29 Received message from Camera: op=State serial=128742 03:03:29 GetSingleValue result=40 Value=cccccccc 03:03:29 SkyScan query 03:03:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:03:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:29 Parameters OK 03:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:29 Set A/D data flow result=40 03:03:29 Set A/D channel type result=40 03:03:29 Set A/D encoding result=40 03:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:29 Set channel filter=0.000000e+000 result=40 03:03:29 Config A/D Result=40 03:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:29 Get A/D filter: -9.255963e+061 result=40 03:03:29 Get A/D value=-858993460 result=40 03:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:29 Parameters OK 03:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:29 Set A/D data flow result=40 03:03:29 Set A/D channel type result=40 03:03:29 Set A/D encoding result=40 03:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:29 Set channel filter=0.000000e+000 result=40 03:03:29 Config A/D Result=40 03:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:29 Get A/D filter: -9.255963e+061 result=40 03:03:29 Get A/D value=-858993460 result=40 03:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:03:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:03:29 Aux= 03:03:29 Message to Camera, serial 128742 queued 03:04:06 Received message from Master: op=PointingHead serial=128755 03:04:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:04:06 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:04:06 Point started: ret=0 03:04:06 point_skyscan result=0 03:04:07 Check angles 03:04:07 SkyScan query 03:04:08 SkyScan query done: ret=0 az=40.995<-2733 ze=21.945<-10537 Statuses=0008 0009 03:04:08 Msec=0 True Az=40.995 Ze=21.945 Az status=0008 Ze status=0009 03:04:08 Check angles 03:04:08 SkyScan query 03:04:09 SkyScan query done: ret=0 az=40.995<-2733 ze=1.005<-11933 Statuses=0008 0009 03:04:09 Msec=750 True Az=40.995 Ze=1.005 Az status=0008 Ze status=0009 03:04:09 Check angles 03:04:09 SkyScan query 03:04:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-19.98<-13332 Statuses=0008 0009 03:04:09 Msec=1500 True Az=40.995 Ze=-19.98 Az status=0008 Ze status=0009 03:04:09 Check angles 03:04:09 SkyScan query 03:04:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0009 03:04:10 Msec=2250 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0009 03:04:10 Check angles 03:04:10 SkyScan query 03:04:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 03:04:11 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 03:04:11 Message to Master queued w/err=0: serial=128755 error=0 03:04:16 Received message from Master: op=Filter serial=128756 03:04:16 Color wheel filter change from 0 to 0 03:04:16 FLIGetFilterPos err=0 currentPosition=0 03:04:16 FLIGetStepsRemaining err=0 RemainingSteps=0 03:04:16 Filter is already there-color wheel unchanged 03:04:16 Received message from Master: op=Shutter serial=128757 03:04:16 Shutter LASER close 03:04:16 Received message from Camera: op=State serial=128759 03:04:16 GetSingleValue result=40 Value=cccccccc 03:04:16 SkyScan query 03:04:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:04:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:04:17 Parameters OK 03:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:04:17 Set A/D data flow result=40 03:04:17 Set A/D channel type result=40 03:04:17 Set A/D encoding result=40 03:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:04:17 Set channel filter=0.000000e+000 result=40 03:04:17 Config A/D Result=40 03:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:04:17 Get A/D filter: -9.255963e+061 result=40 03:04:17 Get A/D value=-858993460 result=40 03:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:04:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:04:17 Parameters OK 03:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:04:17 Set A/D data flow result=40 03:04:17 Set A/D channel type result=40 03:04:17 Set A/D encoding result=40 03:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:04:17 Set channel filter=0.000000e+000 result=40 03:04:17 Config A/D Result=40 03:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:04:17 Get A/D filter: -9.255963e+061 result=40 03:04:17 Get A/D value=-858993460 result=40 03:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:04:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:04:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:04:17 Aux= 03:04:17 Message to Camera, serial 128759 queued 03:04:53 Received message from Master: op=PointingHead serial=128772 03:04:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:04:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:04:54 Point started: ret=0 03:04:54 point_skyscan result=0 03:04:54 Check angles 03:04:54 SkyScan query 03:04:55 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.235<-16549 Statuses=0009 0009 03:04:55 Msec=0 True Az=63.96 Ze=-68.235 Az status=0009 Ze status=0009 03:04:55 Check angles 03:04:55 SkyScan query 03:04:56 SkyScan query done: ret=0 az=81.765<-5451 ze=-89.655<-17977 Statuses=0009 0009 03:04:56 Msec=750 True Az=81.765 Ze=-89.655 Az status=0009 Ze status=0009 03:04:56 Check angles 03:04:56 SkyScan query 03:04:57 SkyScan query done: ret=0 az=99.285<-6619 ze=-110.625<-19375 Statuses=0009 0009 03:04:57 Msec=1500 True Az=99.285 Ze=-110.625 Az status=0009 Ze status=0009 03:04:57 Check angles 03:04:57 SkyScan query 03:04:57 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.565<-20771 Statuses=0009 0009 03:04:57 Msec=2250 True Az=116.76 Ze=-131.565 Az status=0009 Ze status=0009 03:04:58 Check angles 03:04:58 SkyScan query 03:04:58 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 03:04:58 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 03:04:58 Check angles 03:04:58 SkyScan query 03:04:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 03:04:59 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 03:04:59 Message to Master queued w/err=0: serial=128772 error=0 03:05:04 Received message from Master: op=Filter serial=128773 03:05:04 Color wheel filter change from 0 to 0 03:05:04 FLIGetFilterPos err=0 currentPosition=0 03:05:04 FLIGetStepsRemaining err=0 RemainingSteps=0 03:05:04 Filter is already there-color wheel unchanged 03:05:04 Received message from Master: op=Shutter serial=128774 03:05:04 Shutter LASER close 03:05:04 Received message from Camera: op=State serial=128776 03:05:04 GetSingleValue result=40 Value=cccccccc 03:05:04 SkyScan query 03:05:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:05:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:05 Parameters OK 03:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:05 Set A/D data flow result=40 03:05:05 Set A/D channel type result=40 03:05:05 Set A/D encoding result=40 03:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:05 Set channel filter=0.000000e+000 result=40 03:05:05 Config A/D Result=40 03:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:05 Get A/D filter: -9.255963e+061 result=40 03:05:05 Get A/D value=-858993460 result=40 03:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:05 Parameters OK 03:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:05 Set A/D data flow result=40 03:05:05 Set A/D channel type result=40 03:05:05 Set A/D encoding result=40 03:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:05 Set channel filter=0.000000e+000 result=40 03:05:05 Config A/D Result=40 03:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:05 Get A/D filter: -9.255963e+061 result=40 03:05:05 Get A/D value=-858993460 result=40 03:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:05:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:05:05 Aux= 03:05:05 Message to Camera, serial 128776 queued 03:05:41 Received message from Master: op=PointingHead serial=128789 03:05:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:05:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:05:42 Point started: ret=0 03:05:42 point_skyscan result=0 03:05:43 Check angles 03:05:43 SkyScan query 03:05:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 03:05:43 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 03:05:43 Check angles 03:05:43 SkyScan query 03:05:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:05:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:05:44 Message to Master queued w/err=0: serial=128789 error=0 03:05:49 Received message from Master: op=Filter serial=128790 03:05:49 Color wheel filter change from 0 to 0 03:05:49 FLIGetFilterPos err=0 currentPosition=0 03:05:49 FLIGetStepsRemaining err=0 RemainingSteps=0 03:05:49 Filter is already there-color wheel unchanged 03:05:49 Received message from Master: op=Shutter serial=128791 03:05:49 Shutter LASER open 03:05:49 Received message from Camera: op=State serial=128793 03:05:49 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-14 03:05:49] 03:05:49 SkyScan query 03:05:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:05:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:50 Parameters OK 03:05:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:50 Set A/D data flow result=40 03:05:50 Set A/D channel type result=40 03:05:50 Set A/D encoding result=40 03:05:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:50 Set channel filter=0.000000e+000 result=40 03:05:50 Config A/D Result=40 03:05:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:50 Get A/D filter: -9.255963e+061 result=40 03:05:50 Get A/D value=-858993460 result=40 03:05:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:50 Parameters OK 03:05:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:50 Set A/D data flow result=40 03:05:50 Set A/D channel type result=40 03:05:50 Set A/D encoding result=40 03:05:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:50 Set channel filter=0.000000e+000 result=40 03:05:50 Config A/D Result=40 03:05:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:50 Get A/D filter: -9.255963e+061 result=40 03:05:50 Get A/D value=-858993460 result=40 03:05:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:05:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:05:50 Aux= 03:05:50 Message to Camera, serial 128793 queued 03:05:58 Received message from Master: op=Shutter serial=128803 03:05:58 Shutter LASER close 03:05:59 Received message from Master: op=PointingHead serial=128807 03:05:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:05:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:05:59 Point started: ret=0 03:05:59 point_skyscan result=0 03:06:00 Check angles 03:06:00 SkyScan query 03:06:01 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.95<-21530 Statuses=0009 0009 03:06:01 Msec=0 True Az=136.155 Ze=-142.95 Az status=0009 Ze status=0009 03:06:01 Check angles 03:06:01 SkyScan query 03:06:01 SkyScan query done: ret=0 az=153.645<-10243 ze=-121.965<-20131 Statuses=0009 0009 03:06:01 Msec=750 True Az=153.645 Ze=-121.965 Az status=0009 Ze status=0009 03:06:01 Check angles 03:06:01 SkyScan query 03:06:02 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.07<-18738 Statuses=0009 0009 03:06:02 Msec=1500 True Az=171.195 Ze=-101.07 Az status=0009 Ze status=0009 03:06:02 Check angles 03:06:02 SkyScan query 03:06:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.13<-17342 Statuses=0008 0009 03:06:03 Msec=2250 True Az=176.01 Ze=-80.13 Az status=0008 Ze status=0009 03:06:03 Check angles 03:06:03 SkyScan query 03:06:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.13<-15942 Statuses=0008 0009 03:06:04 Msec=3000 True Az=176.01 Ze=-59.13 Az status=0008 Ze status=0009 03:06:04 Check angles 03:06:04 SkyScan query 03:06:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:06:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:06:04 Message to Master queued w/err=0: serial=128807 error=0 03:06:09 Received message from Master: op=Filter serial=128808 03:06:09 Color wheel filter change from 0 to 0 03:06:09 FLIGetFilterPos err=0 currentPosition=0 03:06:09 FLIGetStepsRemaining err=0 RemainingSteps=0 03:06:09 Filter is already there-color wheel unchanged 03:06:09 Received message from Master: op=Shutter serial=128809 03:06:09 Shutter LASER close 03:06:10 Received message from Camera: op=State serial=128811 03:06:10 GetSingleValue result=40 Value=cccccccc 03:06:10 SkyScan query 03:06:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:06:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:10 Parameters OK 03:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:10 Set A/D data flow result=40 03:06:10 Set A/D channel type result=40 03:06:10 Set A/D encoding result=40 03:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:10 Set channel filter=0.000000e+000 result=40 03:06:10 Config A/D Result=40 03:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:10 Get A/D filter: -9.255963e+061 result=40 03:06:10 Get A/D value=-858993460 result=40 03:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:10 Parameters OK 03:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:10 Set A/D data flow result=40 03:06:10 Set A/D channel type result=40 03:06:10 Set A/D encoding result=40 03:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:10 Set channel filter=0.000000e+000 result=40 03:06:10 Config A/D Result=40 03:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:10 Get A/D filter: -9.255963e+061 result=40 03:06:10 Get A/D value=-858993460 result=40 03:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:06:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:06:10 Aux= 03:06:10 Message to Camera, serial 128811 queued 03:06:47 Received message from Master: op=PointingHead serial=128824 03:06:47 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:06:47 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:06:47 Point started: ret=0 03:06:47 point_skyscan result=0 03:06:48 Check angles 03:06:48 SkyScan query 03:06:49 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.555<-13437 Statuses=0009 0009 03:06:49 Msec=0 True Az=152.745 Ze=-21.555 Az status=0009 Ze status=0009 03:06:49 Check angles 03:06:49 SkyScan query 03:06:49 SkyScan query done: ret=0 az=134.91<-8994 ze=-0.135<-12009 Statuses=0009 0009 03:06:49 Msec=750 True Az=134.91 Ze=-0.135 Az status=0009 Ze status=0009 03:06:50 Check angles 03:06:50 SkyScan query 03:06:50 SkyScan query done: ret=0 az=117.48<-7832 ze=20.79<-10614 Statuses=0009 0009 03:06:50 Msec=1500 True Az=117.48 Ze=20.79 Az status=0009 Ze status=0009 03:06:50 Check angles 03:06:50 SkyScan query 03:06:51 SkyScan query done: ret=0 az=100.125<-6675 ze=41.775<-9215 Statuses=0009 0009 03:06:51 Msec=2250 True Az=100.125 Ze=41.775 Az status=0009 Ze status=0009 03:06:51 Check angles 03:06:51 SkyScan query 03:06:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 03:06:52 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 03:06:52 Check angles 03:06:52 SkyScan query 03:06:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:06:53 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:06:53 Message to Master queued w/err=0: serial=128824 error=0 03:06:58 Received message from Master: op=Filter serial=128825 03:06:58 Color wheel filter change from 0 to 0 03:06:58 FLIGetFilterPos err=0 currentPosition=0 03:06:58 FLIGetStepsRemaining err=0 RemainingSteps=0 03:06:58 Filter is already there-color wheel unchanged 03:06:58 Received message from Master: op=Shutter serial=128826 03:06:58 Shutter LASER close 03:06:58 Received message from Camera: op=State serial=128828 03:06:58 GetSingleValue result=40 Value=cccccccc 03:06:58 SkyScan query 03:06:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:06:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:58 Parameters OK 03:06:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:58 Set A/D data flow result=40 03:06:58 Set A/D channel type result=40 03:06:58 Set A/D encoding result=40 03:06:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:58 Set channel filter=0.000000e+000 result=40 03:06:58 Config A/D Result=40 03:06:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:58 Get A/D filter: -9.255963e+061 result=40 03:06:58 Get A/D value=-858993460 result=40 03:06:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:58 Parameters OK 03:06:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:58 Set A/D data flow result=40 03:06:58 Set A/D channel type result=40 03:06:58 Set A/D encoding result=40 03:06:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:58 Set channel filter=0.000000e+000 result=40 03:06:58 Config A/D Result=40 03:06:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:58 Get A/D filter: -9.255963e+061 result=40 03:06:58 Get A/D value=-858993460 result=40 03:06:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:06:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:06:58 Aux= 03:06:58 Message to Camera, serial 128828 queued 03:07:35 Received message from Master: op=PointingHead serial=128841 03:07:35 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:07:35 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:07:36 Point started: ret=0 03:07:36 point_skyscan result=0 03:07:36 Check angles 03:07:36 SkyScan query 03:07:37 SkyScan query done: ret=0 az=85.995<-5733 ze=21.165<-10589 Statuses=0008 0009 03:07:37 Msec=0 True Az=85.995 Ze=21.165 Az status=0008 Ze status=0009 03:07:37 Check angles 03:07:37 SkyScan query 03:07:38 SkyScan query done: ret=0 az=85.995<-5733 ze=0.18<-11988 Statuses=0008 0009 03:07:38 Msec=750 True Az=85.995 Ze=0.18 Az status=0008 Ze status=0009 03:07:38 Check angles 03:07:38 SkyScan query 03:07:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.76<-13384 Statuses=0008 0009 03:07:39 Msec=1500 True Az=85.995 Ze=-20.76 Az status=0008 Ze status=0009 03:07:39 Check angles 03:07:39 SkyScan query 03:07:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.73<-14782 Statuses=0008 0009 03:07:39 Msec=2250 True Az=85.995 Ze=-41.73 Az status=0008 Ze status=0009 03:07:39 Check angles 03:07:39 SkyScan query 03:07:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 03:07:40 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 03:07:40 Message to Master queued w/err=0: serial=128841 error=0 03:07:45 Received message from Master: op=Filter serial=128842 03:07:45 Color wheel filter change from 0 to 0 03:07:45 FLIGetFilterPos err=0 currentPosition=0 03:07:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:07:45 Filter is already there-color wheel unchanged 03:07:45 Received message from Master: op=Shutter serial=128843 03:07:45 Shutter LASER close 03:07:45 Received message from Camera: op=State serial=128845 03:07:45 GetSingleValue result=40 Value=cccccccc 03:07:45 SkyScan query 03:07:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:07:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:46 Parameters OK 03:07:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:46 Set A/D data flow result=40 03:07:46 Set A/D channel type result=40 03:07:46 Set A/D encoding result=40 03:07:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:46 Set channel filter=0.000000e+000 result=40 03:07:46 Config A/D Result=40 03:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:46 Get A/D filter: -9.255963e+061 result=40 03:07:46 Get A/D value=-858993460 result=40 03:07:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:46 Parameters OK 03:07:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:46 Set A/D data flow result=40 03:07:46 Set A/D channel type result=40 03:07:46 Set A/D encoding result=40 03:07:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:46 Set channel filter=0.000000e+000 result=40 03:07:46 Config A/D Result=40 03:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:46 Get A/D filter: -9.255963e+061 result=40 03:07:46 Get A/D value=-858993460 result=40 03:07:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:07:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:07:46 Aux= 03:07:46 Message to Camera, serial 128845 queued 03:08:23 Received message from Master: op=PointingHead serial=128858 03:08:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:08:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:08:23 Point started: ret=0 03:08:23 point_skyscan result=0 03:08:24 Check angles 03:08:24 SkyScan query 03:08:24 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.465<-17431 Statuses=0009 0009 03:08:24 Msec=0 True Az=109.14 Ze=-81.465 Az status=0009 Ze status=0009 03:08:24 Check angles 03:08:24 SkyScan query 03:08:25 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.39<-18826 Statuses=0008 0009 03:08:25 Msec=750 True Az=112.98 Ze=-102.39 Az status=0008 Ze status=0009 03:08:25 Check angles 03:08:25 SkyScan query 03:08:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.795<-20253 Statuses=0008 0009 03:08:26 Msec=1500 True Az=112.995 Ze=-123.795 Az status=0008 Ze status=0009 03:08:26 Check angles 03:08:26 SkyScan query 03:08:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 03:08:27 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 03:08:27 Check angles 03:08:27 SkyScan query 03:08:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.66<-23044 Statuses=0008 0009 03:08:27 Msec=3000 True Az=112.995 Ze=-165.66 Az status=0008 Ze status=0009 03:08:28 Check angles 03:08:28 SkyScan query 03:08:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:08:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:08:28 Message to Master queued w/err=0: serial=128858 error=0 03:08:33 Received message from Master: op=Filter serial=128859 03:08:33 Color wheel filter change from 0 to 0 03:08:33 FLIGetFilterPos err=0 currentPosition=0 03:08:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:08:33 Filter is already there-color wheel unchanged 03:08:33 Received message from Master: op=Shutter serial=128860 03:08:33 Shutter LASER open 03:08:33 Received message from Camera: op=State serial=128862 03:08:33 GetSingleValue result=40 Value=cccccccc 03:08:33 SkyScan query 03:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:08:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:34 Parameters OK 03:08:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:34 Set A/D data flow result=40 03:08:34 Set A/D channel type result=40 03:08:34 Set A/D encoding result=40 03:08:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:34 Set channel filter=0.000000e+000 result=40 03:08:34 Config A/D Result=40 03:08:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:34 Get A/D filter: -9.255963e+061 result=40 03:08:34 Get A/D value=-858993460 result=40 03:08:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:34 Parameters OK 03:08:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:34 Set A/D data flow result=40 03:08:34 Set A/D channel type result=40 03:08:34 Set A/D encoding result=40 03:08:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:34 Set channel filter=0.000000e+000 result=40 03:08:34 Config A/D Result=40 03:08:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:34 Get A/D filter: -9.255963e+061 result=40 03:08:34 Get A/D value=-858993460 result=40 03:08:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:08:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:08:34 Aux= 03:08:34 Message to Camera, serial 128862 queued 03:08:42 Received message from Master: op=Shutter serial=128872 03:08:42 Shutter LASER close 03:08:43 Received message from Master: op=PointingHead serial=128876 03:08:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:08:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:08:43 Point started: ret=0 03:08:43 point_skyscan result=0 03:08:44 Check angles 03:08:44 SkyScan query 03:08:45 SkyScan query done: ret=0 az=90.075<-6005 ze=157.41<-1506 Statuses=0009 0009 03:08:45 Msec=0 True Az=90.075 Ze=157.41 Az status=0009 Ze status=0009 03:08:45 Check angles 03:08:45 SkyScan query 03:08:45 SkyScan query done: ret=0 az=72.6<-4840 ze=136.455<-2903 Statuses=0009 0009 03:08:45 Msec=750 True Az=72.6 Ze=136.455 Az status=0009 Ze status=0009 03:08:45 Check angles 03:08:45 SkyScan query 03:08:46 SkyScan query done: ret=0 az=55.125<-3675 ze=115.53<-4298 Statuses=0009 0009 03:08:46 Msec=1500 True Az=55.125 Ze=115.53 Az status=0009 Ze status=0009 03:08:46 Check angles 03:08:46 SkyScan query 03:08:47 SkyScan query done: ret=0 az=40.965<-2731 ze=94.125<-5725 Statuses=0009 0009 03:08:47 Msec=2250 True Az=40.965 Ze=94.125 Az status=0009 Ze status=0009 03:08:47 Check angles 03:08:47 SkyScan query 03:08:48 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 03:08:48 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 03:08:48 Check angles 03:08:48 SkyScan query 03:08:48 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 03:08:48 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 03:08:49 Check angles 03:08:49 SkyScan query 03:08:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:08:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:08:49 Message to Master queued w/err=0: serial=128876 error=0 03:08:54 Received message from Master: op=Filter serial=128877 03:08:54 Color wheel filter change from 0 to 0 03:08:54 FLIGetFilterPos err=0 currentPosition=0 03:08:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:08:54 Filter is already there-color wheel unchanged 03:08:54 Received message from Master: op=Shutter serial=128878 03:08:54 Shutter LASER close 03:08:54 Received message from Camera: op=State serial=128880 03:08:54 GetSingleValue result=40 Value=cccccccc 03:08:54 SkyScan query 03:08:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:08:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:55 Parameters OK 03:08:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:55 Set A/D data flow result=40 03:08:55 Set A/D channel type result=40 03:08:55 Set A/D encoding result=40 03:08:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:55 Set channel filter=0.000000e+000 result=40 03:08:55 Config A/D Result=40 03:08:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:55 Get A/D filter: -9.255963e+061 result=40 03:08:55 Get A/D value=-858993460 result=40 03:08:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:55 Parameters OK 03:08:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:55 Set A/D data flow result=40 03:08:55 Set A/D channel type result=40 03:08:55 Set A/D encoding result=40 03:08:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:55 Set channel filter=0.000000e+000 result=40 03:08:55 Config A/D Result=40 03:08:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:55 Get A/D filter: -9.255963e+061 result=40 03:08:55 Get A/D value=-858993460 result=40 03:08:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:08:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:08:55 Aux= 03:08:55 Message to Camera, serial 128880 queued 03:09:32 Received message from Master: op=PointingHead serial=128893 03:09:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:09:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:09:32 Point started: ret=0 03:09:32 point_skyscan result=0 03:09:33 Check angles 03:09:33 SkyScan query 03:09:34 SkyScan query done: ret=0 az=40.995<-2733 ze=21.285<-10581 Statuses=0008 0009 03:09:34 Msec=0 True Az=40.995 Ze=21.285 Az status=0008 Ze status=0009 03:09:34 Check angles 03:09:34 SkyScan query 03:09:34 SkyScan query done: ret=0 az=40.995<-2733 ze=0.285<-11981 Statuses=0008 0009 03:09:34 Msec=750 True Az=40.995 Ze=0.285 Az status=0008 Ze status=0009 03:09:35 Check angles 03:09:35 SkyScan query 03:09:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.625<-13375 Statuses=0008 0009 03:09:35 Msec=1500 True Az=40.995 Ze=-20.625 Az status=0008 Ze status=0009 03:09:35 Check angles 03:09:35 SkyScan query 03:09:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:09:36 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:09:36 Check angles 03:09:36 SkyScan query 03:09:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:09:37 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:09:37 Message to Master queued w/err=0: serial=128893 error=0 03:09:42 Received message from Master: op=Filter serial=128894 03:09:42 Color wheel filter change from 0 to 0 03:09:42 FLIGetFilterPos err=0 currentPosition=0 03:09:42 FLIGetStepsRemaining err=0 RemainingSteps=0 03:09:42 Filter is already there-color wheel unchanged 03:09:42 Received message from Master: op=Shutter serial=128895 03:09:42 Shutter LASER close 03:09:42 Received message from Camera: op=State serial=128897 03:09:42 GetSingleValue result=40 Value=cccccccc 03:09:42 SkyScan query 03:09:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:09:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:09:43 Parameters OK 03:09:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:09:43 Set A/D data flow result=40 03:09:43 Set A/D channel type result=40 03:09:43 Set A/D encoding result=40 03:09:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:09:43 Set channel filter=0.000000e+000 result=40 03:09:43 Config A/D Result=40 03:09:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:09:43 Get A/D filter: -9.255963e+061 result=40 03:09:43 Get A/D value=-858993460 result=40 03:09:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:09:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:09:43 Parameters OK 03:09:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:09:43 Set A/D data flow result=40 03:09:43 Set A/D channel type result=40 03:09:43 Set A/D encoding result=40 03:09:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:09:43 Set channel filter=0.000000e+000 result=40 03:09:43 Config A/D Result=40 03:09:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:09:43 Get A/D filter: -9.255963e+061 result=40 03:09:43 Get A/D value=-858993460 result=40 03:09:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:09:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:09:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:09:43 Aux= 03:09:43 Message to Camera, serial 128897 queued 03:10:19 Received message from Master: op=PointingHead serial=128910 03:10:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:10:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:10:20 Point started: ret=0 03:10:20 point_skyscan result=0 03:10:20 Check angles 03:10:20 SkyScan query 03:10:21 SkyScan query done: ret=0 az=63.72<-4248 ze=-68.085<-16539 Statuses=0009 0009 03:10:21 Msec=0 True Az=63.72 Ze=-68.085 Az status=0009 Ze status=0009 03:10:21 Check angles 03:10:21 SkyScan query 03:10:22 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.025<-17935 Statuses=0009 0009 03:10:22 Msec=750 True Az=81.285 Ze=-89.025 Az status=0009 Ze status=0009 03:10:22 Check angles 03:10:22 SkyScan query 03:10:23 SkyScan query done: ret=0 az=98.805<-6587 ze=-109.995<-19333 Statuses=0009 0009 03:10:23 Msec=1500 True Az=98.805 Ze=-109.995 Az status=0009 Ze status=0009 03:10:23 Check angles 03:10:23 SkyScan query 03:10:23 SkyScan query done: ret=0 az=116.205<-7747 ze=-130.935<-20729 Statuses=0009 0009 03:10:23 Msec=2250 True Az=116.205 Ze=-130.935 Az status=0009 Ze status=0009 03:10:23 Check angles 03:10:23 SkyScan query 03:10:24 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 03:10:24 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 03:10:24 Check angles 03:10:24 SkyScan query 03:10:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 03:10:25 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 03:10:25 Message to Master queued w/err=0: serial=128910 error=0 03:10:30 Received message from Master: op=Filter serial=128911 03:10:30 Color wheel filter change from 0 to 0 03:10:30 FLIGetFilterPos err=0 currentPosition=0 03:10:30 FLIGetStepsRemaining err=0 RemainingSteps=0 03:10:30 Filter is already there-color wheel unchanged 03:10:30 Received message from Master: op=Shutter serial=128912 03:10:30 Shutter LASER close 03:10:30 Received message from Camera: op=State serial=128914 03:10:30 GetSingleValue result=40 Value=cccccccc 03:10:30 SkyScan query 03:10:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:10:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:31 Parameters OK 03:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:31 Set A/D data flow result=40 03:10:31 Set A/D channel type result=40 03:10:31 Set A/D encoding result=40 03:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:31 Set channel filter=0.000000e+000 result=40 03:10:31 Config A/D Result=40 03:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:31 Get A/D filter: -9.255963e+061 result=40 03:10:31 Get A/D value=-858993460 result=40 03:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:31 Parameters OK 03:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:31 Set A/D data flow result=40 03:10:31 Set A/D channel type result=40 03:10:31 Set A/D encoding result=40 03:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:31 Set channel filter=0.000000e+000 result=40 03:10:31 Config A/D Result=40 03:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:31 Get A/D filter: -9.255963e+061 result=40 03:10:31 Get A/D value=-858993460 result=40 03:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:10:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:10:31 Aux= 03:10:31 Message to Camera, serial 128914 queued 03:11:07 Received message from Master: op=PointingHead serial=128927 03:11:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:11:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:11:08 Point started: ret=0 03:11:08 point_skyscan result=0 03:11:09 Check angles 03:11:09 SkyScan query 03:11:09 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.33<-23422 Statuses=0009 0009 03:11:09 Msec=0 True Az=113.01 Ze=-171.33 Az status=0009 Ze status=0009 03:11:09 Check angles 03:11:09 SkyScan query 03:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:11:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:11:10 Message to Master queued w/err=0: serial=128927 error=0 03:11:15 Received message from Master: op=Filter serial=128928 03:11:15 Color wheel filter change from 0 to 0 03:11:15 FLIGetFilterPos err=0 currentPosition=0 03:11:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:11:15 Filter is already there-color wheel unchanged 03:11:15 Received message from Master: op=Shutter serial=128929 03:11:15 Shutter LASER open 03:11:15 Received message from Camera: op=State serial=128931 03:11:15 GetSingleValue result=40 Value=cccccccc 03:11:15 SkyScan query 03:11:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:11:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:16 Parameters OK 03:11:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:16 Set A/D data flow result=40 03:11:16 Set A/D channel type result=40 03:11:16 Set A/D encoding result=40 03:11:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:16 Set channel filter=0.000000e+000 result=40 03:11:16 Config A/D Result=40 03:11:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:16 Get A/D filter: -9.255963e+061 result=40 03:11:16 Get A/D value=-858993460 result=40 03:11:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:16 Parameters OK 03:11:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:16 Set A/D data flow result=40 03:11:16 Set A/D channel type result=40 03:11:16 Set A/D encoding result=40 03:11:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:16 Set channel filter=0.000000e+000 result=40 03:11:16 Config A/D Result=40 03:11:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:16 Get A/D filter: -9.255963e+061 result=40 03:11:16 Get A/D value=-858993460 result=40 03:11:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:11:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:11:16 Aux= 03:11:16 Message to Camera, serial 128931 queued 03:11:24 Received message from Master: op=Shutter serial=128941 03:11:24 Shutter LASER close 03:11:25 Received message from Master: op=PointingHead serial=128945 03:11:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:11:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:11:25 Point started: ret=0 03:11:25 point_skyscan result=0 03:11:26 Check angles 03:11:26 SkyScan query 03:11:27 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.535<-21569 Statuses=0009 0009 03:11:27 Msec=0 True Az=135.81 Ze=-143.535 Az status=0009 Ze status=0009 03:11:27 Check angles 03:11:27 SkyScan query 03:11:27 SkyScan query done: ret=0 az=153.255<-10217 ze=-122.58<-20172 Statuses=0009 0009 03:11:27 Msec=750 True Az=153.255 Ze=-122.58 Az status=0009 Ze status=0009 03:11:27 Check angles 03:11:27 SkyScan query 03:11:28 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.655<-18777 Statuses=0009 0009 03:11:28 Msec=1500 True Az=170.775 Ze=-101.655 Az status=0009 Ze status=0009 03:11:28 Check angles 03:11:28 SkyScan query 03:11:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.595<-17373 Statuses=0008 0009 03:11:29 Msec=2250 True Az=176.01 Ze=-80.595 Az status=0008 Ze status=0009 03:11:29 Check angles 03:11:29 SkyScan query 03:11:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.235<-15949 Statuses=0008 0009 03:11:30 Msec=3000 True Az=176.01 Ze=-59.235 Az status=0008 Ze status=0009 03:11:30 Check angles 03:11:30 SkyScan query 03:11:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:11:30 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:11:30 Message to Master queued w/err=0: serial=128945 error=0 03:11:35 Received message from Master: op=Filter serial=128946 03:11:35 Color wheel filter change from 0 to 0 03:11:35 FLIGetFilterPos err=0 currentPosition=0 03:11:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:11:35 Filter is already there-color wheel unchanged 03:11:35 Received message from Master: op=Shutter serial=128947 03:11:35 Shutter LASER close 03:11:36 Received message from Camera: op=State serial=128949 03:11:36 GetSingleValue result=40 Value=cccccccc 03:11:36 SkyScan query 03:11:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:11:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:36 Parameters OK 03:11:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:36 Set A/D data flow result=40 03:11:36 Set A/D channel type result=40 03:11:36 Set A/D encoding result=40 03:11:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:36 Set channel filter=0.000000e+000 result=40 03:11:36 Config A/D Result=40 03:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:36 Get A/D filter: -9.255963e+061 result=40 03:11:36 Get A/D value=-858993460 result=40 03:11:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:36 Parameters OK 03:11:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:36 Set A/D data flow result=40 03:11:36 Set A/D channel type result=40 03:11:36 Set A/D encoding result=40 03:11:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:36 Set channel filter=0.000000e+000 result=40 03:11:36 Config A/D Result=40 03:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:36 Get A/D filter: -9.255963e+061 result=40 03:11:36 Get A/D value=-858993460 result=40 03:11:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:11:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:11:36 Aux= 03:11:36 Message to Camera, serial 128949 queued 03:12:13 Received message from Master: op=PointingHead serial=128962 03:12:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:12:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:12:13 Point started: ret=0 03:12:13 point_skyscan result=0 03:12:14 Check angles 03:12:14 SkyScan query 03:12:15 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.66<-13444 Statuses=0009 0009 03:12:15 Msec=0 True Az=152.91 Ze=-21.66 Az status=0009 Ze status=0009 03:12:15 Check angles 03:12:15 SkyScan query 03:12:16 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.645<-12043 Statuses=0009 0009 03:12:16 Msec=750 True Az=135.42 Ze=-0.645 Az status=0009 Ze status=0009 03:12:16 Check angles 03:12:16 SkyScan query 03:12:16 SkyScan query done: ret=0 az=117.825<-7855 ze=20.28<-10648 Statuses=0009 0009 03:12:16 Msec=1500 True Az=117.825 Ze=20.28 Az status=0009 Ze status=0009 03:12:16 Check angles 03:12:16 SkyScan query 03:12:17 SkyScan query done: ret=0 az=100.455<-6697 ze=41.25<-9250 Statuses=0009 0009 03:12:17 Msec=2250 True Az=100.455 Ze=41.25 Az status=0009 Ze status=0009 03:12:17 Check angles 03:12:17 SkyScan query 03:12:18 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 03:12:18 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 03:12:18 Check angles 03:12:18 SkyScan query 03:12:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:12:19 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:12:19 Message to Master queued w/err=0: serial=128962 error=0 03:12:24 Received message from Master: op=Filter serial=128963 03:12:24 Color wheel filter change from 0 to 0 03:12:24 FLIGetFilterPos err=0 currentPosition=0 03:12:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:12:24 Filter is already there-color wheel unchanged 03:12:24 Received message from Master: op=Shutter serial=128964 03:12:24 Shutter LASER close 03:12:24 Received message from Camera: op=State serial=128966 03:12:24 GetSingleValue result=40 Value=cccccccc 03:12:24 SkyScan query 03:12:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:12:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:24 Parameters OK 03:12:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:24 Set A/D data flow result=40 03:12:24 Set A/D channel type result=40 03:12:24 Set A/D encoding result=40 03:12:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:24 Set channel filter=0.000000e+000 result=40 03:12:24 Config A/D Result=40 03:12:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:24 Get A/D filter: -9.255963e+061 result=40 03:12:24 Get A/D value=-858993460 result=40 03:12:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:24 Parameters OK 03:12:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:24 Set A/D data flow result=40 03:12:24 Set A/D channel type result=40 03:12:24 Set A/D encoding result=40 03:12:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:24 Set channel filter=0.000000e+000 result=40 03:12:24 Config A/D Result=40 03:12:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:24 Get A/D filter: -9.255963e+061 result=40 03:12:24 Get A/D value=-858993460 result=40 03:12:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:12:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:12:24 Aux= 03:12:24 Message to Camera, serial 128966 queued 03:13:01 Received message from Master: op=PointingHead serial=128979 03:13:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:13:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:13:02 Point started: ret=0 03:13:02 point_skyscan result=0 03:13:02 Check angles 03:13:02 SkyScan query 03:13:03 SkyScan query done: ret=0 az=85.995<-5733 ze=21.57<-10562 Statuses=0008 0009 03:13:03 Msec=0 True Az=85.995 Ze=21.57 Az status=0008 Ze status=0009 03:13:03 Check angles 03:13:03 SkyScan query 03:13:04 SkyScan query done: ret=0 az=85.995<-5733 ze=0.165<-11989 Statuses=0008 0009 03:13:04 Msec=750 True Az=85.995 Ze=0.165 Az status=0008 Ze status=0009 03:13:04 Check angles 03:13:04 SkyScan query 03:13:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.76<-13384 Statuses=0008 0009 03:13:04 Msec=1500 True Az=85.995 Ze=-20.76 Az status=0008 Ze status=0009 03:13:05 Check angles 03:13:05 SkyScan query 03:13:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.15<-14810 Statuses=0008 0009 03:13:05 Msec=2250 True Az=85.995 Ze=-42.15 Az status=0008 Ze status=0009 03:13:05 Check angles 03:13:05 SkyScan query 03:13:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 03:13:06 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 03:13:06 Message to Master queued w/err=0: serial=128979 error=0 03:13:11 Received message from Master: op=Filter serial=128980 03:13:11 Color wheel filter change from 0 to 0 03:13:11 FLIGetFilterPos err=0 currentPosition=0 03:13:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:13:11 Filter is already there-color wheel unchanged 03:13:11 Received message from Master: op=Shutter serial=128981 03:13:11 Shutter LASER close 03:13:11 Received message from Camera: op=State serial=128983 03:13:11 GetSingleValue result=40 Value=cccccccc 03:13:11 SkyScan query 03:13:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:13:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:12 Parameters OK 03:13:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:12 Set A/D data flow result=40 03:13:12 Set A/D channel type result=40 03:13:12 Set A/D encoding result=40 03:13:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:12 Set channel filter=0.000000e+000 result=40 03:13:12 Config A/D Result=40 03:13:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:12 Get A/D filter: -9.255963e+061 result=40 03:13:12 Get A/D value=-858993460 result=40 03:13:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:12 Parameters OK 03:13:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:12 Set A/D data flow result=40 03:13:12 Set A/D channel type result=40 03:13:12 Set A/D encoding result=40 03:13:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:12 Set channel filter=0.000000e+000 result=40 03:13:12 Config A/D Result=40 03:13:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:12 Get A/D filter: -9.255963e+061 result=40 03:13:12 Get A/D value=-858993460 result=40 03:13:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:13:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:13:12 Aux= 03:13:12 Message to Camera, serial 128983 queued 03:13:49 Received message from Master: op=PointingHead serial=128996 03:13:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:13:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:13:49 Point started: ret=0 03:13:49 point_skyscan result=0 03:13:50 Check angles 03:13:50 SkyScan query 03:13:50 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.24<-17416 Statuses=0009 0009 03:13:50 Msec=0 True Az=109.14 Ze=-81.24 Az status=0009 Ze status=0009 03:13:50 Check angles 03:13:50 SkyScan query 03:13:51 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.195<-18813 Statuses=0008 0009 03:13:51 Msec=750 True Az=112.98 Ze=-102.195 Az status=0008 Ze status=0009 03:13:51 Check angles 03:13:51 SkyScan query 03:13:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 03:13:52 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 03:13:52 Check angles 03:13:52 SkyScan query 03:13:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 03:13:53 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 03:13:53 Check angles 03:13:53 SkyScan query 03:13:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.525<-23035 Statuses=0008 0009 03:13:53 Msec=3000 True Az=112.995 Ze=-165.525 Az status=0008 Ze status=0009 03:13:53 Check angles 03:13:53 SkyScan query 03:13:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:13:54 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:13:54 Message to Master queued w/err=0: serial=128996 error=0 03:13:59 Received message from Master: op=Filter serial=128997 03:13:59 Color wheel filter change from 0 to 0 03:13:59 FLIGetFilterPos err=0 currentPosition=0 03:13:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:13:59 Filter is already there-color wheel unchanged 03:13:59 Received message from Master: op=Shutter serial=128998 03:13:59 Shutter LASER open 03:13:59 Received message from Camera: op=State serial=129000 03:13:59 GetSingleValue result=40 Value=cccccccc 03:13:59 SkyScan query 03:14:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:14:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:00 Parameters OK 03:14:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:00 Set A/D data flow result=40 03:14:00 Set A/D channel type result=40 03:14:00 Set A/D encoding result=40 03:14:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:00 Set channel filter=0.000000e+000 result=40 03:14:00 Config A/D Result=40 03:14:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:00 Get A/D filter: -9.255963e+061 result=40 03:14:00 Get A/D value=-858993460 result=40 03:14:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:00 Parameters OK 03:14:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:00 Set A/D data flow result=40 03:14:00 Set A/D channel type result=40 03:14:00 Set A/D encoding result=40 03:14:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:00 Set channel filter=0.000000e+000 result=40 03:14:00 Config A/D Result=40 03:14:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:00 Get A/D filter: -9.255963e+061 result=40 03:14:00 Get A/D value=-858993460 result=40 03:14:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:14:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:14:00 Aux= 03:14:00 Message to Camera, serial 129000 queued 03:14:08 Received message from Master: op=Shutter serial=129010 03:14:08 Shutter LASER close 03:14:09 Received message from Master: op=PointingHead serial=129014 03:14:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:14:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:14:09 Point started: ret=0 03:14:09 point_skyscan result=0 03:14:10 Check angles 03:14:10 SkyScan query 03:14:10 SkyScan query done: ret=0 az=89.79<-5986 ze=157.065<-1529 Statuses=0009 0009 03:14:10 Msec=0 True Az=89.79 Ze=157.065 Az status=0009 Ze status=0009 03:14:11 Check angles 03:14:11 SkyScan query 03:14:11 SkyScan query done: ret=0 az=72.27<-4818 ze=136.11<-2926 Statuses=0009 0009 03:14:11 Msec=750 True Az=72.27 Ze=136.11 Az status=0009 Ze status=0009 03:14:11 Check angles 03:14:11 SkyScan query 03:14:12 SkyScan query done: ret=0 az=54.645<-3643 ze=114.72<-4352 Statuses=0009 0009 03:14:12 Msec=1500 True Az=54.645 Ze=114.72 Az status=0009 Ze status=0009 03:14:12 Check angles 03:14:12 SkyScan query 03:14:13 SkyScan query done: ret=0 az=40.965<-2731 ze=93.765<-5749 Statuses=0009 0009 03:14:13 Msec=2250 True Az=40.965 Ze=93.765 Az status=0009 Ze status=0009 03:14:13 Check angles 03:14:13 SkyScan query 03:14:13 SkyScan query done: ret=0 az=40.995<-2733 ze=72.75<-7150 Statuses=0008 0009 03:14:13 Msec=3000 True Az=40.995 Ze=72.75 Az status=0008 Ze status=0009 03:14:14 Check angles 03:14:14 SkyScan query 03:14:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.215<-8519 Statuses=0008 0009 03:14:14 Msec=3750 True Az=40.995 Ze=52.215 Az status=0008 Ze status=0009 03:14:14 Check angles 03:14:14 SkyScan query 03:14:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:14:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:14:15 Message to Master queued w/err=0: serial=129014 error=0 03:14:20 Received message from Master: op=Filter serial=129015 03:14:20 Color wheel filter change from 0 to 0 03:14:20 FLIGetFilterPos err=0 currentPosition=0 03:14:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:14:20 Filter is already there-color wheel unchanged 03:14:20 Received message from Master: op=Shutter serial=129016 03:14:20 Shutter LASER close 03:14:20 Received message from Camera: op=State serial=129018 03:14:20 GetSingleValue result=40 Value=cccccccc 03:14:20 SkyScan query 03:14:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:14:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:21 Parameters OK 03:14:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:21 Set A/D data flow result=40 03:14:21 Set A/D channel type result=40 03:14:21 Set A/D encoding result=40 03:14:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:21 Set channel filter=0.000000e+000 result=40 03:14:21 Config A/D Result=40 03:14:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:21 Get A/D filter: -9.255963e+061 result=40 03:14:21 Get A/D value=-858993460 result=40 03:14:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:21 Parameters OK 03:14:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:21 Set A/D data flow result=40 03:14:21 Set A/D channel type result=40 03:14:21 Set A/D encoding result=40 03:14:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:21 Set channel filter=0.000000e+000 result=40 03:14:21 Config A/D Result=40 03:14:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:21 Get A/D filter: -9.255963e+061 result=40 03:14:21 Get A/D value=-858993460 result=40 03:14:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:14:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:14:21 Aux= 03:14:21 Message to Camera, serial 129018 queued 03:14:58 Received message from Master: op=PointingHead serial=129031 03:14:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:14:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:14:58 Point started: ret=0 03:14:58 point_skyscan result=0 03:14:59 Check angles 03:14:59 SkyScan query 03:15:00 SkyScan query done: ret=0 az=40.995<-2733 ze=21.48<-10568 Statuses=0008 0009 03:15:00 Msec=0 True Az=40.995 Ze=21.48 Az status=0008 Ze status=0009 03:15:00 Check angles 03:15:00 SkyScan query 03:15:00 SkyScan query done: ret=0 az=40.995<-2733 ze=0.06<-11996 Statuses=0008 0009 03:15:00 Msec=750 True Az=40.995 Ze=0.06 Az status=0008 Ze status=0009 03:15:01 Check angles 03:15:01 SkyScan query 03:15:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.88<-13392 Statuses=0008 0009 03:15:01 Msec=1500 True Az=40.995 Ze=-20.88 Az status=0008 Ze status=0009 03:15:01 Check angles 03:15:01 SkyScan query 03:15:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:15:02 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:15:02 Check angles 03:15:02 SkyScan query 03:15:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:15:03 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:15:03 Message to Master queued w/err=0: serial=129031 error=0 03:15:08 Received message from Master: op=Filter serial=129032 03:15:08 Color wheel filter change from 0 to 0 03:15:08 FLIGetFilterPos err=0 currentPosition=0 03:15:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:15:08 Filter is already there-color wheel unchanged 03:15:08 Received message from Master: op=Shutter serial=129033 03:15:08 Shutter LASER close 03:15:08 Received message from Camera: op=State serial=129035 03:15:08 GetSingleValue result=40 Value=cccccccc 03:15:08 SkyScan query 03:15:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:15:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:08 Parameters OK 03:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:08 Set A/D data flow result=40 03:15:08 Set A/D channel type result=40 03:15:08 Set A/D encoding result=40 03:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:08 Set channel filter=0.000000e+000 result=40 03:15:08 Config A/D Result=40 03:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:08 Get A/D filter: -9.255963e+061 result=40 03:15:08 Get A/D value=-858993460 result=40 03:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:08 Parameters OK 03:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:08 Set A/D data flow result=40 03:15:08 Set A/D channel type result=40 03:15:08 Set A/D encoding result=40 [UTC 2018-12-14 03:15:08] 03:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:08 Set channel filter=0.000000e+000 result=40 03:15:08 Config A/D Result=40 03:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:08 Get A/D filter: -9.255963e+061 result=40 03:15:08 Get A/D value=-858993460 result=40 03:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:15:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:15:08 Aux= 03:15:08 Message to Camera, serial 129035 queued 03:15:27 Received message from Master: op=Identify serial=129036 03:15:45 Received message from Master: op=PointingHead serial=129051 03:15:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:15:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:15:46 Point started: ret=0 03:15:46 point_skyscan result=0 03:15:46 Check angles 03:15:46 SkyScan query 03:15:47 SkyScan query done: ret=0 az=63.705<-4247 ze=-68.07<-16538 Statuses=0009 0009 03:15:47 Msec=0 True Az=63.705 Ze=-68.07 Az status=0009 Ze status=0009 03:15:47 Check angles 03:15:47 SkyScan query 03:15:48 SkyScan query done: ret=0 az=81.255<-5417 ze=-89.01<-17934 Statuses=0009 0009 03:15:48 Msec=750 True Az=81.255 Ze=-89.01 Az status=0009 Ze status=0009 03:15:48 Check angles 03:15:48 SkyScan query 03:15:48 SkyScan query done: ret=0 az=98.685<-6579 ze=-109.95<-19330 Statuses=0009 0009 03:15:48 Msec=1500 True Az=98.685 Ze=-109.95 Az status=0009 Ze status=0009 03:15:49 Check angles 03:15:49 SkyScan query 03:15:49 SkyScan query done: ret=0 az=116.13<-7742 ze=-130.905<-20727 Statuses=0009 0009 03:15:49 Msec=2250 True Az=116.13 Ze=-130.905 Az status=0009 Ze status=0009 03:15:49 Check angles 03:15:49 SkyScan query 03:15:50 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 03:15:50 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 03:15:50 Check angles 03:15:50 SkyScan query 03:15:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 03:15:51 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 03:15:51 Message to Master queued w/err=0: serial=129051 error=0 [UTC 2018-12-14 03:15:52] 03:15:56 Received message from Master: op=Filter serial=129052 03:15:56 Color wheel filter change from 0 to 0 03:15:56 FLIGetFilterPos err=0 currentPosition=0 03:15:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:15:56 Filter is already there-color wheel unchanged 03:15:56 Received message from Master: op=Shutter serial=129053 03:15:56 Shutter LASER close 03:15:56 Received message from Camera: op=State serial=129055 03:15:56 GetSingleValue result=40 Value=cccccccc 03:15:56 SkyScan query 03:15:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:15:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:56 Parameters OK 03:15:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:56 Set A/D data flow result=40 03:15:56 Set A/D channel type result=40 03:15:56 Set A/D encoding result=40 03:15:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:56 Set channel filter=0.000000e+000 result=40 03:15:56 Config A/D Result=40 03:15:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:56 Get A/D filter: -9.255963e+061 result=40 03:15:56 Get A/D value=-858993460 result=40 03:15:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:56 Parameters OK 03:15:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:56 Set A/D data flow result=40 03:15:56 Set A/D channel type result=40 03:15:56 Set A/D encoding result=40 03:15:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:56 Set channel filter=0.000000e+000 result=40 03:15:56 Config A/D Result=40 03:15:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:56 Get A/D filter: -9.255963e+061 result=40 03:15:56 Get A/D value=-858993460 result=40 03:15:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:15:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:15:56 Aux= 03:15:56 Message to Camera, serial 129055 queued 03:16:32 Received message from Master: op=PointingHead serial=129067 03:16:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:16:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:16:33 Point started: ret=0 03:16:33 point_skyscan result=0 03:16:33 Check angles 03:16:33 SkyScan query 03:16:34 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 03:16:34 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 03:16:34 Check angles 03:16:34 SkyScan query 03:16:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:16:35 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:16:35 Message to Master queued w/err=0: serial=129067 error=0 03:16:40 Received message from Master: op=Filter serial=129068 03:16:40 Color wheel filter change from 0 to 0 03:16:40 FLIGetFilterPos err=0 currentPosition=0 03:16:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:16:40 Filter is already there-color wheel unchanged 03:16:40 Received message from Master: op=Shutter serial=129069 03:16:40 Shutter LASER open 03:16:40 Received message from Camera: op=State serial=129071 03:16:40 GetSingleValue result=40 Value=cccccccc 03:16:40 SkyScan query 03:16:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:16:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:41 Parameters OK 03:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:41 Set A/D data flow result=40 03:16:41 Set A/D channel type result=40 03:16:41 Set A/D encoding result=40 03:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:41 Set channel filter=0.000000e+000 result=40 03:16:41 Config A/D Result=40 03:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:41 Get A/D filter: -9.255963e+061 result=40 03:16:41 Get A/D value=-858993460 result=40 03:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:41 Parameters OK 03:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:41 Set A/D data flow result=40 03:16:41 Set A/D channel type result=40 03:16:41 Set A/D encoding result=40 03:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:41 Set channel filter=0.000000e+000 result=40 03:16:41 Config A/D Result=40 03:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:41 Get A/D filter: -9.255963e+061 result=40 03:16:41 Get A/D value=-858993460 result=40 03:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:16:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:16:41 Aux= 03:16:41 Message to Camera, serial 129071 queued 03:16:49 Received message from Master: op=Shutter serial=129081 03:16:49 Shutter LASER close 03:16:50 Received message from Master: op=PointingHead serial=129085 03:16:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:16:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:16:50 Point started: ret=0 03:16:50 point_skyscan result=0 03:16:51 Check angles 03:16:51 SkyScan query 03:16:51 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.475<-21565 Statuses=0009 0009 03:16:51 Msec=0 True Az=135.705 Ze=-143.475 Az status=0009 Ze status=0009 03:16:52 Check angles 03:16:52 SkyScan query 03:16:52 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.025<-20135 Statuses=0009 0009 03:16:52 Msec=750 True Az=153.585 Ze=-122.025 Az status=0009 Ze status=0009 03:16:52 Check angles 03:16:52 SkyScan query 03:16:53 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.53<-18702 Statuses=0009 0009 03:16:53 Msec=1500 True Az=171.435 Ze=-100.53 Az status=0009 Ze status=0009 03:16:53 Check angles 03:16:53 SkyScan query 03:16:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.755<-17317 Statuses=0008 0009 03:16:54 Msec=2250 True Az=176.01 Ze=-79.755 Az status=0008 Ze status=0009 03:16:54 Check angles 03:16:54 SkyScan query 03:16:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.77<-15918 Statuses=0008 0009 03:16:54 Msec=3000 True Az=176.01 Ze=-58.77 Az status=0008 Ze status=0009 03:16:55 Check angles 03:16:55 SkyScan query 03:16:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:16:55 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:16:55 Message to Master queued w/err=0: serial=129085 error=0 03:17:00 Received message from Master: op=Filter serial=129086 03:17:00 Color wheel filter change from 0 to 0 03:17:00 FLIGetFilterPos err=0 currentPosition=0 03:17:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:17:00 Filter is already there-color wheel unchanged 03:17:00 Received message from Master: op=Shutter serial=129087 03:17:00 Shutter LASER close 03:17:01 Received message from Camera: op=State serial=129089 03:17:01 GetSingleValue result=40 Value=cccccccc 03:17:01 SkyScan query 03:17:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:17:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:01 Parameters OK 03:17:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:01 Set A/D data flow result=40 03:17:01 Set A/D channel type result=40 03:17:01 Set A/D encoding result=40 03:17:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:01 Set channel filter=0.000000e+000 result=40 03:17:01 Config A/D Result=40 03:17:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:01 Get A/D filter: -9.255963e+061 result=40 03:17:01 Get A/D value=-858993460 result=40 03:17:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:01 Parameters OK 03:17:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:01 Set A/D data flow result=40 03:17:01 Set A/D channel type result=40 03:17:01 Set A/D encoding result=40 03:17:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:01 Set channel filter=0.000000e+000 result=40 03:17:01 Config A/D Result=40 03:17:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:01 Get A/D filter: -9.255963e+061 result=40 03:17:01 Get A/D value=-858993460 result=40 03:17:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:17:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:17:01 Aux= 03:17:01 Message to Camera, serial 129089 queued 03:17:38 Received message from Master: op=PointingHead serial=129102 03:17:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:17:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:17:38 Point started: ret=0 03:17:38 point_skyscan result=0 03:17:39 Check angles 03:17:39 SkyScan query 03:17:40 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.765<-13451 Statuses=0009 0009 03:17:40 Msec=0 True Az=152.955 Ze=-21.765 Az status=0009 Ze status=0009 03:17:40 Check angles 03:17:40 SkyScan query 03:17:40 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.795<-12053 Statuses=0009 0009 03:17:40 Msec=750 True Az=135.57 Ze=-0.795 Az status=0009 Ze status=0009 03:17:41 Check angles 03:17:41 SkyScan query 03:17:41 SkyScan query done: ret=0 az=118.005<-7867 ze=20.16<-10656 Statuses=0009 0009 03:17:41 Msec=1500 True Az=118.005 Ze=20.16 Az status=0009 Ze status=0009 03:17:41 Check angles 03:17:41 SkyScan query 03:17:42 SkyScan query done: ret=0 az=100.62<-6708 ze=41.13<-9258 Statuses=0009 0009 03:17:42 Msec=2250 True Az=100.62 Ze=41.13 Az status=0009 Ze status=0009 03:17:42 Check angles 03:17:42 SkyScan query 03:17:43 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 03:17:43 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 03:17:43 Check angles 03:17:43 SkyScan query 03:17:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:17:43 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:17:43 Message to Master queued w/err=0: serial=129102 error=0 03:17:48 Received message from Master: op=Filter serial=129103 03:17:48 Color wheel filter change from 0 to 0 03:17:48 FLIGetFilterPos err=0 currentPosition=0 03:17:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:17:48 Filter is already there-color wheel unchanged 03:17:49 Received message from Master: op=Shutter serial=129104 03:17:49 Shutter LASER close 03:17:49 Received message from Camera: op=State serial=129106 03:17:49 GetSingleValue result=40 Value=cccccccc 03:17:49 SkyScan query 03:17:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:17:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:49 Parameters OK 03:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:49 Set A/D data flow result=40 03:17:49 Set A/D channel type result=40 03:17:49 Set A/D encoding result=40 03:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:49 Set channel filter=0.000000e+000 result=40 03:17:49 Config A/D Result=40 03:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:49 Get A/D filter: -9.255963e+061 result=40 03:17:49 Get A/D value=-858993460 result=40 03:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:49 Parameters OK 03:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:49 Set A/D data flow result=40 03:17:49 Set A/D channel type result=40 03:17:49 Set A/D encoding result=40 03:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:49 Set channel filter=0.000000e+000 result=40 03:17:49 Config A/D Result=40 03:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:49 Get A/D filter: -9.255963e+061 result=40 03:17:49 Get A/D value=-858993460 result=40 03:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:17:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:17:49 Aux= 03:17:49 Message to Camera, serial 129106 queued 03:18:26 Received message from Master: op=PointingHead serial=129119 03:18:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:18:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:18:26 Point started: ret=0 03:18:26 point_skyscan result=0 03:18:27 Check angles 03:18:27 SkyScan query 03:18:28 SkyScan query done: ret=0 az=85.995<-5733 ze=21.915<-10539 Statuses=0008 0009 03:18:28 Msec=0 True Az=85.995 Ze=21.915 Az status=0008 Ze status=0009 03:18:28 Check angles 03:18:28 SkyScan query 03:18:29 SkyScan query done: ret=0 az=85.995<-5733 ze=0.54<-11964 Statuses=0008 0009 03:18:29 Msec=750 True Az=85.995 Ze=0.54 Az status=0008 Ze status=0009 03:18:29 Check angles 03:18:29 SkyScan query 03:18:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.4<-13360 Statuses=0008 0009 03:18:29 Msec=1500 True Az=85.995 Ze=-20.4 Az status=0008 Ze status=0009 03:18:29 Check angles 03:18:29 SkyScan query 03:18:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.34<-14756 Statuses=0008 0009 03:18:30 Msec=2250 True Az=85.995 Ze=-41.34 Az status=0008 Ze status=0009 03:18:30 Check angles 03:18:30 SkyScan query 03:18:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 03:18:31 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 03:18:31 Message to Master queued w/err=0: serial=129119 error=0 03:18:36 Received message from Master: op=Filter serial=129120 03:18:36 Color wheel filter change from 0 to 0 03:18:36 FLIGetFilterPos err=0 currentPosition=0 03:18:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:18:36 Filter is already there-color wheel unchanged 03:18:36 Received message from Master: op=Shutter serial=129121 03:18:36 Shutter LASER close 03:18:36 Received message from Camera: op=State serial=129123 03:18:36 GetSingleValue result=40 Value=cccccccc 03:18:36 SkyScan query 03:18:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:18:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:37 Parameters OK 03:18:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:37 Set A/D data flow result=40 03:18:37 Set A/D channel type result=40 03:18:37 Set A/D encoding result=40 03:18:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:37 Set channel filter=0.000000e+000 result=40 03:18:37 Config A/D Result=40 03:18:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:37 Get A/D filter: -9.255963e+061 result=40 03:18:37 Get A/D value=-858993460 result=40 03:18:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:37 Parameters OK 03:18:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:37 Set A/D data flow result=40 03:18:37 Set A/D channel type result=40 03:18:37 Set A/D encoding result=40 03:18:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:37 Set channel filter=0.000000e+000 result=40 03:18:37 Config A/D Result=40 03:18:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:37 Get A/D filter: -9.255963e+061 result=40 03:18:37 Get A/D value=-858993460 result=40 03:18:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:18:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:18:37 Aux= 03:18:37 Message to Camera, serial 129123 queued 03:19:14 Received message from Master: op=PointingHead serial=129136 03:19:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:19:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:19:14 Point started: ret=0 03:19:14 point_skyscan result=0 03:19:15 Check angles 03:19:15 SkyScan query 03:19:15 SkyScan query done: ret=0 az=109.32<-7288 ze=-81.525<-17435 Statuses=0009 0009 03:19:15 Msec=0 True Az=109.32 Ze=-81.525 Az status=0009 Ze status=0009 03:19:15 Check angles 03:19:15 SkyScan query 03:19:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.945<-18863 Statuses=0008 0009 03:19:16 Msec=750 True Az=112.995 Ze=-102.945 Az status=0008 Ze status=0009 03:19:16 Check angles 03:19:16 SkyScan query 03:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.87<-20258 Statuses=0008 0009 03:19:17 Msec=1500 True Az=112.995 Ze=-123.87 Az status=0008 Ze status=0009 03:19:17 Check angles 03:19:17 SkyScan query 03:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 03:19:17 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 03:19:18 Check angles 03:19:18 SkyScan query 03:19:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.17<-23078 Statuses=0008 0009 03:19:18 Msec=3000 True Az=112.995 Ze=-166.17 Az status=0008 Ze status=0009 03:19:18 Check angles 03:19:18 SkyScan query 03:19:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:19:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:19:19 Message to Master queued w/err=0: serial=129136 error=0 03:19:24 Received message from Master: op=Filter serial=129137 03:19:24 Color wheel filter change from 0 to 0 03:19:24 FLIGetFilterPos err=0 currentPosition=0 03:19:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:24 Filter is already there-color wheel unchanged 03:19:24 Received message from Master: op=Shutter serial=129138 03:19:24 Shutter LASER open 03:19:24 Received message from Camera: op=State serial=129140 03:19:24 GetSingleValue result=40 Value=cccccccc 03:19:24 SkyScan query 03:19:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:19:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:25 Parameters OK 03:19:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:25 Set A/D data flow result=40 03:19:25 Set A/D channel type result=40 03:19:25 Set A/D encoding result=40 03:19:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:25 Set channel filter=0.000000e+000 result=40 03:19:25 Config A/D Result=40 03:19:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:25 Get A/D filter: -9.255963e+061 result=40 03:19:25 Get A/D value=-858993460 result=40 03:19:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:25 Parameters OK 03:19:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:25 Set A/D data flow result=40 03:19:25 Set A/D channel type result=40 03:19:25 Set A/D encoding result=40 03:19:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:25 Set channel filter=0.000000e+000 result=40 03:19:25 Config A/D Result=40 03:19:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:25 Get A/D filter: -9.255963e+061 result=40 03:19:25 Get A/D value=-858993460 result=40 03:19:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:25 Aux= 03:19:25 Message to Camera, serial 129140 queued 03:19:33 Received message from Master: op=Shutter serial=129150 03:19:33 Shutter LASER close 03:19:34 Received message from Master: op=PointingHead serial=129154 03:19:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:19:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:19:34 Point started: ret=0 03:19:34 point_skyscan result=0 03:19:35 Check angles 03:19:35 SkyScan query 03:19:35 SkyScan query done: ret=0 az=90.075<-6005 ze=157.38<-1508 Statuses=0009 0009 03:19:35 Msec=0 True Az=90.075 Ze=157.38 Az status=0009 Ze status=0009 03:19:36 Check angles 03:19:36 SkyScan query 03:19:36 SkyScan query done: ret=0 az=72.225<-4815 ze=135.99<-2934 Statuses=0009 0009 03:19:36 Msec=750 True Az=72.225 Ze=135.99 Az status=0009 Ze status=0009 03:19:36 Check angles 03:19:36 SkyScan query 03:19:37 SkyScan query done: ret=0 az=54.525<-3635 ze=114.57<-4362 Statuses=0009 0009 03:19:37 Msec=1500 True Az=54.525 Ze=114.57 Az status=0009 Ze status=0009 03:19:37 Check angles 03:19:37 SkyScan query 03:19:38 SkyScan query done: ret=0 az=40.965<-2731 ze=93.63<-5758 Statuses=0009 0009 03:19:38 Msec=2250 True Az=40.965 Ze=93.63 Az status=0009 Ze status=0009 03:19:38 Check angles 03:19:38 SkyScan query 03:19:38 SkyScan query done: ret=0 az=40.995<-2733 ze=72.675<-7155 Statuses=0008 0009 03:19:38 Msec=3000 True Az=40.995 Ze=72.675 Az status=0008 Ze status=0009 03:19:39 Check angles 03:19:39 SkyScan query 03:19:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 03:19:39 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 03:19:39 Check angles 03:19:39 SkyScan query 03:19:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:19:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:19:40 Message to Master queued w/err=0: serial=129154 error=0 03:19:45 Received message from Master: op=Filter serial=129155 03:19:45 Color wheel filter change from 0 to 0 03:19:45 FLIGetFilterPos err=0 currentPosition=0 03:19:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:45 Filter is already there-color wheel unchanged 03:19:45 Received message from Master: op=Shutter serial=129156 03:19:45 Shutter LASER close 03:19:45 Received message from Camera: op=State serial=129158 03:19:45 GetSingleValue result=40 Value=cccccccc 03:19:45 SkyScan query 03:19:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:19:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:46 Parameters OK 03:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:46 Set A/D data flow result=40 03:19:46 Set A/D channel type result=40 03:19:46 Set A/D encoding result=40 03:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:46 Set channel filter=0.000000e+000 result=40 03:19:46 Config A/D Result=40 03:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:46 Get A/D filter: -9.255963e+061 result=40 03:19:46 Get A/D value=-858993460 result=40 03:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:46 Parameters OK 03:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:46 Set A/D data flow result=40 03:19:46 Set A/D channel type result=40 03:19:46 Set A/D encoding result=40 03:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:46 Set channel filter=0.000000e+000 result=40 03:19:46 Config A/D Result=40 03:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:46 Get A/D filter: -9.255963e+061 result=40 03:19:46 Get A/D value=-858993460 result=40 03:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:46 Aux= 03:19:46 Message to Camera, serial 129158 queued 03:20:23 Received message from Master: op=PointingHead serial=129171 03:20:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:20:23 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:20:23 Point started: ret=0 03:20:23 point_skyscan result=0 03:20:24 Check angles 03:20:24 SkyScan query 03:20:25 SkyScan query done: ret=0 az=40.995<-2733 ze=21.81<-10546 Statuses=0008 0009 03:20:25 Msec=0 True Az=40.995 Ze=21.81 Az status=0008 Ze status=0009 03:20:25 Check angles 03:20:25 SkyScan query 03:20:25 SkyScan query done: ret=0 az=40.995<-2733 ze=0.84<-11944 Statuses=0008 0009 03:20:25 Msec=750 True Az=40.995 Ze=0.84 Az status=0008 Ze status=0009 03:20:26 Check angles 03:20:26 SkyScan query 03:20:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.1<-13340 Statuses=0008 0009 03:20:26 Msec=1500 True Az=40.995 Ze=-20.1 Az status=0008 Ze status=0009 03:20:26 Check angles 03:20:26 SkyScan query 03:20:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 03:20:27 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 03:20:27 Check angles 03:20:27 SkyScan query 03:20:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 03:20:28 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 03:20:28 Message to Master queued w/err=0: serial=129171 error=0 03:20:33 Received message from Master: op=Filter serial=129172 03:20:33 Color wheel filter change from 0 to 0 03:20:33 FLIGetFilterPos err=0 currentPosition=0 03:20:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:33 Filter is already there-color wheel unchanged 03:20:33 Received message from Master: op=Shutter serial=129173 03:20:33 Shutter LASER close 03:20:33 Received message from Camera: op=State serial=129175 03:20:33 GetSingleValue result=40 Value=cccccccc 03:20:33 SkyScan query 03:20:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:20:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:33 Parameters OK 03:20:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:33 Set A/D data flow result=40 03:20:33 Set A/D channel type result=40 03:20:33 Set A/D encoding result=40 03:20:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:33 Set channel filter=0.000000e+000 result=40 03:20:33 Config A/D Result=40 03:20:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:33 Get A/D filter: -9.255963e+061 result=40 03:20:33 Get A/D value=-858993460 result=40 03:20:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:33 Parameters OK 03:20:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:33 Set A/D data flow result=40 03:20:33 Set A/D channel type result=40 03:20:33 Set A/D encoding result=40 03:20:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:33 Set channel filter=0.000000e+000 result=40 03:20:33 Config A/D Result=40 03:20:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:33 Get A/D filter: -9.255963e+061 result=40 03:20:33 Get A/D value=-858993460 result=40 03:20:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:20:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:20:33 Aux= 03:20:33 Message to Camera, serial 129175 queued 03:21:10 Received message from Master: op=PointingHead serial=129188 03:21:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:21:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:21:11 Point started: ret=0 03:21:11 point_skyscan result=0 03:21:11 Check angles 03:21:11 SkyScan query 03:21:12 SkyScan query done: ret=0 az=64.05<-4270 ze=-68.55<-16570 Statuses=0009 0009 03:21:12 Msec=0 True Az=64.05 Ze=-68.55 Az status=0009 Ze status=0009 03:21:12 Check angles 03:21:12 SkyScan query 03:21:13 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.865<-17991 Statuses=0009 0009 03:21:13 Msec=750 True Az=81.9 Ze=-89.865 Az status=0009 Ze status=0009 03:21:13 Check angles 03:21:13 SkyScan query 03:21:13 SkyScan query done: ret=0 az=99.555<-6637 ze=-110.82<-19388 Statuses=0009 0009 03:21:13 Msec=1500 True Az=99.555 Ze=-110.82 Az status=0009 Ze status=0009 03:21:14 Check angles 03:21:14 SkyScan query 03:21:14 SkyScan query done: ret=0 az=117.315<-7821 ze=-132.18<-20812 Statuses=0009 0009 03:21:14 Msec=2250 True Az=117.315 Ze=-132.18 Az status=0009 Ze status=0009 03:21:14 Check angles 03:21:14 SkyScan query 03:21:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 03:21:15 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 03:21:15 Check angles 03:21:15 SkyScan query 03:21:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 03:21:16 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 03:21:16 Message to Master queued w/err=0: serial=129188 error=0 03:21:21 Received message from Master: op=Filter serial=129189 03:21:21 Color wheel filter change from 0 to 0 03:21:21 FLIGetFilterPos err=0 currentPosition=0 03:21:21 FLIGetStepsRemaining err=0 RemainingSteps=0 03:21:21 Filter is already there-color wheel unchanged 03:21:21 Received message from Master: op=Shutter serial=129190 03:21:21 Shutter LASER close 03:21:21 Received message from Camera: op=State serial=129192 03:21:21 GetSingleValue result=40 Value=cccccccc 03:21:21 SkyScan query 03:21:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:21:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:22 Parameters OK 03:21:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:22 Set A/D data flow result=40 03:21:22 Set A/D channel type result=40 03:21:22 Set A/D encoding result=40 03:21:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:22 Set channel filter=0.000000e+000 result=40 03:21:22 Config A/D Result=40 03:21:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:22 Get A/D filter: -9.255963e+061 result=40 03:21:22 Get A/D value=-858993460 result=40 03:21:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:22 Parameters OK 03:21:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:22 Set A/D data flow result=40 03:21:22 Set A/D channel type result=40 03:21:22 Set A/D encoding result=40 03:21:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:22 Set channel filter=0.000000e+000 result=40 03:21:22 Config A/D Result=40 03:21:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:22 Get A/D filter: -9.255963e+061 result=40 03:21:22 Get A/D value=-858993460 result=40 03:21:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:21:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:21:22 Aux= 03:21:22 Message to Camera, serial 129192 queued 03:21:58 Received message from Master: op=PointingHead serial=129205 03:21:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:21:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:21:59 Point started: ret=0 03:21:59 point_skyscan result=0 03:21:59 Check angles 03:21:59 SkyScan query 03:22:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 03:22:00 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 03:22:00 Check angles 03:22:00 SkyScan query 03:22:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:22:01 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:22:01 Message to Master queued w/err=0: serial=129205 error=0 03:22:06 Received message from Master: op=Filter serial=129206 03:22:06 Color wheel filter change from 0 to 0 03:22:06 FLIGetFilterPos err=0 currentPosition=0 03:22:06 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:06 Filter is already there-color wheel unchanged 03:22:06 Received message from Master: op=Shutter serial=129207 03:22:06 Shutter LASER open 03:22:06 Received message from Camera: op=State serial=129209 03:22:06 GetSingleValue result=40 Value=cccccccc 03:22:06 SkyScan query 03:22:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:22:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:07 Parameters OK 03:22:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:07 Set A/D data flow result=40 03:22:07 Set A/D channel type result=40 03:22:07 Set A/D encoding result=40 03:22:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:07 Set channel filter=0.000000e+000 result=40 03:22:07 Config A/D Result=40 03:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:07 Get A/D filter: -9.255963e+061 result=40 03:22:07 Get A/D value=-858993460 result=40 03:22:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:07 Parameters OK 03:22:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:07 Set A/D data flow result=40 03:22:07 Set A/D channel type result=40 03:22:07 Set A/D encoding result=40 03:22:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:07 Set channel filter=0.000000e+000 result=40 03:22:07 Config A/D Result=40 03:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:07 Get A/D filter: -9.255963e+061 result=40 03:22:07 Get A/D value=-858993460 result=40 03:22:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:22:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:22:07 Aux= 03:22:07 Message to Camera, serial 129209 queued 03:22:15 Received message from Master: op=Shutter serial=129219 03:22:15 Shutter LASER close 03:22:16 Received message from Master: op=PointingHead serial=129223 03:22:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:22:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:22:16 Point started: ret=0 03:22:16 point_skyscan result=0 03:22:17 Check angles 03:22:17 SkyScan query 03:22:17 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.49<-21566 Statuses=0009 0009 03:22:17 Msec=0 True Az=135.825 Ze=-143.49 Az status=0009 Ze status=0009 03:22:18 Check angles 03:22:18 SkyScan query 03:22:18 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.505<-20167 Statuses=0009 0009 03:22:18 Msec=750 True Az=153.225 Ze=-122.505 Az status=0009 Ze status=0009 03:22:18 Check angles 03:22:18 SkyScan query 03:22:19 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.13<-18742 Statuses=0009 0009 03:22:19 Msec=1500 True Az=171.09 Ze=-101.13 Az status=0009 Ze status=0009 03:22:19 Check angles 03:22:19 SkyScan query 03:22:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.19<-17346 Statuses=0008 0009 03:22:20 Msec=2250 True Az=176.01 Ze=-80.19 Az status=0008 Ze status=0009 03:22:20 Check angles 03:22:20 SkyScan query 03:22:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.205<-15947 Statuses=0008 0009 03:22:20 Msec=3000 True Az=176.01 Ze=-59.205 Az status=0008 Ze status=0009 03:22:21 Check angles 03:22:21 SkyScan query 03:22:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:22:21 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:22:21 Message to Master queued w/err=0: serial=129223 error=0 03:22:26 Received message from Master: op=Filter serial=129224 03:22:26 Color wheel filter change from 0 to 0 03:22:26 FLIGetFilterPos err=0 currentPosition=0 03:22:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:26 Filter is already there-color wheel unchanged 03:22:26 Received message from Master: op=Shutter serial=129225 03:22:26 Shutter LASER close 03:22:26 Received message from Camera: op=State serial=129227 03:22:26 GetSingleValue result=40 Value=cccccccc 03:22:26 SkyScan query 03:22:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:22:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:27 Parameters OK 03:22:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:27 Set A/D data flow result=40 03:22:27 Set A/D channel type result=40 03:22:27 Set A/D encoding result=40 03:22:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:27 Set channel filter=0.000000e+000 result=40 03:22:27 Config A/D Result=40 03:22:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:27 Get A/D filter: -9.255963e+061 result=40 03:22:27 Get A/D value=-858993460 result=40 03:22:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:27 Parameters OK 03:22:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:27 Set A/D data flow result=40 03:22:27 Set A/D channel type result=40 03:22:27 Set A/D encoding result=40 03:22:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:27 Set channel filter=0.000000e+000 result=40 03:22:27 Config A/D Result=40 03:22:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:27 Get A/D filter: -9.255963e+061 result=40 03:22:27 Get A/D value=-858993460 result=40 03:22:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:22:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:22:27 Aux= 03:22:27 Message to Camera, serial 129227 queued 03:23:04 Received message from Master: op=PointingHead serial=129240 03:23:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:23:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:23:04 Point started: ret=0 03:23:04 point_skyscan result=0 03:23:05 Check angles 03:23:05 SkyScan query 03:23:06 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.75<-13450 Statuses=0009 0009 03:23:06 Msec=0 True Az=152.955 Ze=-21.75 Az status=0009 Ze status=0009 03:23:06 Check angles 03:23:06 SkyScan query 03:23:06 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.315<-12021 Statuses=0009 0009 03:23:06 Msec=750 True Az=135.12 Ze=-0.315 Az status=0009 Ze status=0009 03:23:07 Check angles 03:23:07 SkyScan query 03:23:07 SkyScan query done: ret=0 az=117.615<-7841 ze=20.64<-10624 Statuses=0009 0009 03:23:07 Msec=1500 True Az=117.615 Ze=20.64 Az status=0009 Ze status=0009 03:23:07 Check angles 03:23:07 SkyScan query 03:23:08 SkyScan query done: ret=0 az=99.885<-6659 ze=42.03<-9198 Statuses=0009 0009 03:23:08 Msec=2250 True Az=99.885 Ze=42.03 Az status=0009 Ze status=0009 03:23:08 Check angles 03:23:08 SkyScan query 03:23:09 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 03:23:09 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 03:23:09 Check angles 03:23:09 SkyScan query 03:23:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:23:09 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:23:09 Message to Master queued w/err=0: serial=129240 error=0 03:23:14 Received message from Master: op=Filter serial=129241 03:23:14 Color wheel filter change from 0 to 0 03:23:14 FLIGetFilterPos err=0 currentPosition=0 03:23:14 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:14 Filter is already there-color wheel unchanged 03:23:15 Received message from Master: op=Shutter serial=129242 03:23:15 Shutter LASER close 03:23:15 Received message from Camera: op=State serial=129244 03:23:15 GetSingleValue result=40 Value=cccccccc 03:23:15 SkyScan query 03:23:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:23:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:15 Parameters OK 03:23:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:15 Set A/D data flow result=40 03:23:15 Set A/D channel type result=40 03:23:15 Set A/D encoding result=40 03:23:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:15 Set channel filter=0.000000e+000 result=40 03:23:15 Config A/D Result=40 03:23:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:15 Get A/D filter: -9.255963e+061 result=40 03:23:15 Get A/D value=-858993460 result=40 03:23:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:15 Parameters OK 03:23:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:15 Set A/D data flow result=40 03:23:15 Set A/D channel type result=40 03:23:15 Set A/D encoding result=40 03:23:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:15 Set channel filter=0.000000e+000 result=40 03:23:15 Config A/D Result=40 03:23:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:15 Get A/D filter: -9.255963e+061 result=40 03:23:15 Get A/D value=-858993460 result=40 03:23:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:15 Aux= 03:23:15 Message to Camera, serial 129244 queued 03:23:52 Received message from Master: op=PointingHead serial=129257 03:23:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:23:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:23:52 Point started: ret=0 03:23:52 point_skyscan result=0 03:23:53 Check angles 03:23:53 SkyScan query 03:23:54 SkyScan query done: ret=0 az=85.995<-5733 ze=21.33<-10578 Statuses=0008 0009 03:23:54 Msec=0 True Az=85.995 Ze=21.33 Az status=0008 Ze status=0009 03:23:54 Check angles 03:23:54 SkyScan query 03:23:55 SkyScan query done: ret=0 az=85.995<-5733 ze=0.375<-11975 Statuses=0008 0009 03:23:55 Msec=750 True Az=85.995 Ze=0.375 Az status=0008 Ze status=0009 03:23:55 Check angles 03:23:55 SkyScan query 03:23:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.565<-13371 Statuses=0008 0009 03:23:55 Msec=1500 True Az=85.995 Ze=-20.565 Az status=0008 Ze status=0009 03:23:55 Check angles 03:23:55 SkyScan query 03:23:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.52<-14768 Statuses=0008 0009 03:23:56 Msec=2250 True Az=85.995 Ze=-41.52 Az status=0008 Ze status=0009 03:23:56 Check angles 03:23:56 SkyScan query 03:23:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 03:23:57 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 03:23:57 Message to Master queued w/err=0: serial=129257 error=0 03:24:02 Received message from Master: op=Filter serial=129258 03:24:02 Color wheel filter change from 0 to 0 03:24:02 FLIGetFilterPos err=0 currentPosition=0 03:24:02 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:02 Filter is already there-color wheel unchanged 03:24:02 Received message from Master: op=Shutter serial=129259 03:24:02 Shutter LASER close 03:24:02 Received message from Camera: op=State serial=129261 03:24:02 GetSingleValue result=40 Value=cccccccc 03:24:02 SkyScan query 03:24:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:24:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:03 Parameters OK 03:24:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:03 Set A/D data flow result=40 03:24:03 Set A/D channel type result=40 03:24:03 Set A/D encoding result=40 03:24:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:03 Set channel filter=0.000000e+000 result=40 03:24:03 Config A/D Result=40 03:24:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:03 Get A/D filter: -9.255963e+061 result=40 03:24:03 Get A/D value=-858993460 result=40 03:24:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:03 Parameters OK 03:24:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:03 Set A/D data flow result=40 03:24:03 Set A/D channel type result=40 03:24:03 Set A/D encoding result=40 03:24:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:03 Set channel filter=0.000000e+000 result=40 03:24:03 Config A/D Result=40 03:24:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:03 Get A/D filter: -9.255963e+061 result=40 03:24:03 Get A/D value=-858993460 result=40 03:24:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:03 Aux= 03:24:03 Message to Camera, serial 129261 queued 03:24:39 Received message from Master: op=PointingHead serial=129274 03:24:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:24:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:24:40 Point started: ret=0 03:24:40 point_skyscan result=0 03:24:41 Check angles 03:24:41 SkyScan query 03:24:41 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.33<-17422 Statuses=0009 0009 03:24:41 Msec=0 True Az=109.14 Ze=-81.33 Az status=0009 Ze status=0009 03:24:41 Check angles 03:24:41 SkyScan query 03:24:42 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.72<-18848 Statuses=0008 0009 03:24:42 Msec=750 True Az=112.98 Ze=-102.72 Az status=0008 Ze status=0009 03:24:42 Check angles 03:24:42 SkyScan query 03:24:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.095<-20273 Statuses=0008 0009 03:24:43 Msec=1500 True Az=112.995 Ze=-124.095 Az status=0008 Ze status=0009 03:24:43 Check angles 03:24:43 SkyScan query 03:24:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.05<-21670 Statuses=0008 0009 03:24:43 Msec=2250 True Az=112.995 Ze=-145.05 Az status=0008 Ze status=0009 03:24:44 Check angles 03:24:44 SkyScan query 03:24:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.44<-23096 Statuses=0008 0009 03:24:44 Msec=3000 True Az=112.995 Ze=-166.44 Az status=0008 Ze status=0009 03:24:44 Check angles 03:24:44 SkyScan query 03:24:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:24:45 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:24:45 Message to Master queued w/err=0: serial=129274 error=0 03:24:50 Received message from Master: op=Filter serial=129275 03:24:50 Color wheel filter change from 0 to 0 03:24:50 FLIGetFilterPos err=0 currentPosition=0 03:24:50 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:50 Filter is already there-color wheel unchanged 03:24:50 Received message from Master: op=Shutter serial=129276 03:24:50 Shutter LASER open 03:24:50 Received message from Camera: op=State serial=129278 03:24:50 GetSingleValue result=40 Value=cccccccc 03:24:50 SkyScan query 03:24:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:24:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:51 Parameters OK 03:24:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:51 Set A/D data flow result=40 03:24:51 Set A/D channel type result=40 03:24:51 Set A/D encoding result=40 03:24:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:51 Set channel filter=0.000000e+000 result=40 03:24:51 Config A/D Result=40 03:24:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:51 Get A/D filter: -9.255963e+061 result=40 03:24:51 Get A/D value=-858993460 result=40 03:24:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:51 Parameters OK 03:24:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:51 Set A/D data flow result=40 03:24:51 Set A/D channel type result=40 03:24:51 Set A/D encoding result=40 03:24:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:51 Set channel filter=0.000000e+000 result=40 03:24:51 Config A/D Result=40 03:24:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:51 Get A/D filter: -9.255963e+061 result=40 03:24:51 Get A/D value=-858993460 result=40 03:24:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:51 Aux= 03:24:51 Message to Camera, serial 129278 queued 03:24:59 Received message from Master: op=Shutter serial=129288 03:24:59 Shutter LASER close 03:25:00 Received message from Master: op=PointingHead serial=129292 03:25:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:25:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:25:00 Point started: ret=0 03:25:00 point_skyscan result=0 03:25:01 Check angles 03:25:01 SkyScan query 03:25:01 SkyScan query done: ret=0 az=89.625<-5975 ze=157.035<-1531 Statuses=0009 0009 03:25:01 Msec=0 True Az=89.625 Ze=157.035 Az status=0009 Ze status=0009 03:25:02 Check angles 03:25:02 SkyScan query 03:25:02 SkyScan query done: ret=0 az=72.24<-4816 ze=136.035<-2931 Statuses=0009 0009 03:25:02 Msec=750 True Az=72.24 Ze=136.035 Az status=0009 Ze status=0009 03:25:02 Check angles 03:25:02 SkyScan query 03:25:03 SkyScan query done: ret=0 az=54.9<-3660 ze=115.02<-4332 Statuses=0009 0009 03:25:03 Msec=1500 True Az=54.9 Ze=115.02 Az status=0009 Ze status=0009 03:25:03 Check angles 03:25:03 SkyScan query 03:25:04 SkyScan query done: ret=0 az=40.965<-2731 ze=94.155<-5723 Statuses=0009 0009 03:25:04 Msec=2250 True Az=40.965 Ze=94.155 Az status=0009 Ze status=0009 03:25:04 Check angles 03:25:04 SkyScan query 03:25:04 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 03:25:04 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 03:25:05 Check angles 03:25:05 SkyScan query 03:25:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 03:25:05 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 03:25:05 Check angles 03:25:05 SkyScan query 03:25:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:25:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:25:06 Message to Master queued w/err=0: serial=129292 error=0 03:25:11 Received message from Master: op=Filter serial=129293 03:25:11 Color wheel filter change from 0 to 0 03:25:11 FLIGetFilterPos err=0 currentPosition=0 03:25:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:11 Filter is already there-color wheel unchanged 03:25:11 Received message from Master: op=Shutter serial=129294 03:25:11 Shutter LASER close 03:25:11 Received message from Camera: op=State serial=129296 03:25:11 GetSingleValue result=40 Value=cccccccc 03:25:11 SkyScan query 03:25:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:25:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:12 Parameters OK 03:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:12 Set A/D data flow result=40 03:25:12 Set A/D channel type result=40 03:25:12 Set A/D encoding result=40 03:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:12 Set channel filter=0.000000e+000 result=40 03:25:12 Config A/D Result=40 03:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:12 Get A/D filter: -9.255963e+061 result=40 03:25:12 Get A/D value=-858993460 result=40 03:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:12 Parameters OK 03:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:12 Set A/D data flow result=40 03:25:12 Set A/D channel type result=40 03:25:12 Set A/D encoding result=40 03:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:12 Set channel filter=0.000000e+000 result=40 03:25:12 Config A/D Result=40 [UTC 2018-12-14 03:25:12] 03:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:12 Get A/D filter: -9.255963e+061 result=40 03:25:12 Get A/D value=-858993460 result=40 03:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:12 Aux= 03:25:12 Message to Camera, serial 129296 queued 03:25:49 Received message from Master: op=PointingHead serial=129309 03:25:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:25:49 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:25:49 Point started: ret=0 03:25:49 point_skyscan result=0 03:25:50 Check angles 03:25:50 SkyScan query 03:25:50 SkyScan query done: ret=0 az=40.995<-2733 ze=21.84<-10544 Statuses=0008 0009 03:25:50 Msec=0 True Az=40.995 Ze=21.84 Az status=0008 Ze status=0009 03:25:51 Check angles 03:25:51 SkyScan query 03:25:51 SkyScan query done: ret=0 az=40.995<-2733 ze=0.855<-11943 Statuses=0008 0009 03:25:51 Msec=750 True Az=40.995 Ze=0.855 Az status=0008 Ze status=0009 03:25:51 Check angles 03:25:51 SkyScan query 03:25:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.52<-13368 Statuses=0008 0009 03:25:52 Msec=1500 True Az=40.995 Ze=-20.52 Az status=0008 Ze status=0009 03:25:52 Check angles 03:25:52 SkyScan query 03:25:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 03:25:53 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 03:25:53 Check angles 03:25:53 SkyScan query 03:25:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:25:53 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:25:53 Message to Master queued w/err=0: serial=129309 error=0 03:25:58 Received message from Master: op=Filter serial=129310 03:25:58 Color wheel filter change from 0 to 0 03:25:58 FLIGetFilterPos err=0 currentPosition=0 03:25:58 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:58 Filter is already there-color wheel unchanged 03:25:59 Received message from Master: op=Shutter serial=129311 03:25:59 Shutter LASER close 03:25:59 Received message from Camera: op=State serial=129313 03:25:59 GetSingleValue result=40 Value=cccccccc 03:25:59 SkyScan query 03:25:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:25:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:59 Parameters OK 03:25:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:59 Set A/D data flow result=40 03:25:59 Set A/D channel type result=40 03:25:59 Set A/D encoding result=40 03:25:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:59 Set channel filter=0.000000e+000 result=40 03:25:59 Config A/D Result=40 03:25:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:59 Get A/D filter: -9.255963e+061 result=40 03:25:59 Get A/D value=-858993460 result=40 03:25:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:59 Parameters OK 03:25:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:59 Set A/D data flow result=40 03:25:59 Set A/D channel type result=40 03:25:59 Set A/D encoding result=40 03:25:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:59 Set channel filter=0.000000e+000 result=40 03:25:59 Config A/D Result=40 03:25:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:59 Get A/D filter: -9.255963e+061 result=40 03:25:59 Get A/D value=-858993460 result=40 03:25:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:59 Aux= 03:25:59 Message to Camera, serial 129313 queued 03:26:36 Received message from Master: op=PointingHead serial=129326 03:26:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:26:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:26:36 Point started: ret=0 03:26:36 point_skyscan result=0 03:26:37 Check angles 03:26:37 SkyScan query 03:26:38 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.565<-16571 Statuses=0009 0009 03:26:38 Msec=0 True Az=64.23 Ze=-68.565 Az status=0009 Ze status=0009 03:26:38 Check angles 03:26:38 SkyScan query 03:26:39 SkyScan query done: ret=0 az=82.005<-5467 ze=-89.955<-17997 Statuses=0009 0009 03:26:39 Msec=750 True Az=82.005 Ze=-89.955 Az status=0009 Ze status=0009 03:26:39 Check angles 03:26:39 SkyScan query 03:26:39 SkyScan query done: ret=0 az=99.69<-6646 ze=-110.91<-19394 Statuses=0009 0009 03:26:39 Msec=1500 True Az=99.69 Ze=-110.91 Az status=0009 Ze status=0009 03:26:39 Check angles 03:26:39 SkyScan query 03:26:40 SkyScan query done: ret=0 az=117.18<-7812 ze=-131.85<-20790 Statuses=0009 0009 03:26:40 Msec=2250 True Az=117.18 Ze=-131.85 Az status=0009 Ze status=0009 03:26:40 Check angles 03:26:40 SkyScan query 03:26:41 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 03:26:41 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 03:26:41 Check angles 03:26:41 SkyScan query 03:26:42 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:26:42 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:26:42 Message to Master queued w/err=0: serial=129326 error=0 03:26:47 Received message from Master: op=Filter serial=129327 03:26:47 Color wheel filter change from 0 to 0 03:26:47 FLIGetFilterPos err=0 currentPosition=0 03:26:47 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:47 Filter is already there-color wheel unchanged 03:26:47 Received message from Master: op=Shutter serial=129328 03:26:47 Shutter LASER close 03:26:47 Received message from Camera: op=State serial=129330 03:26:47 GetSingleValue result=40 Value=cccccccc 03:26:47 SkyScan query 03:26:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:26:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:47 Parameters OK 03:26:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:47 Set A/D data flow result=40 03:26:47 Set A/D channel type result=40 03:26:47 Set A/D encoding result=40 03:26:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:47 Set channel filter=0.000000e+000 result=40 03:26:47 Config A/D Result=40 03:26:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:47 Get A/D filter: -9.255963e+061 result=40 03:26:47 Get A/D value=-858993460 result=40 03:26:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:47 Parameters OK 03:26:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:47 Set A/D data flow result=40 03:26:47 Set A/D channel type result=40 03:26:47 Set A/D encoding result=40 03:26:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:47 Set channel filter=0.000000e+000 result=40 03:26:47 Config A/D Result=40 03:26:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:47 Get A/D filter: -9.255963e+061 result=40 03:26:47 Get A/D value=-858993460 result=40 03:26:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:47 Aux= 03:26:47 Message to Camera, serial 129330 queued 03:27:24 Received message from Master: op=PointingHead serial=129343 03:27:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:27:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:27:25 Point started: ret=0 03:27:25 point_skyscan result=0 03:27:25 Check angles 03:27:25 SkyScan query 03:27:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.405<-23427 Statuses=0009 0009 03:27:26 Msec=0 True Az=113.01 Ze=-171.405 Az status=0009 Ze status=0009 03:27:26 Check angles 03:27:26 SkyScan query 03:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:27:27 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:27:27 Message to Master queued w/err=0: serial=129343 error=0 03:27:32 Received message from Master: op=Filter serial=129344 03:27:32 Color wheel filter change from 0 to 0 03:27:32 FLIGetFilterPos err=0 currentPosition=0 03:27:32 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:32 Filter is already there-color wheel unchanged 03:27:32 Received message from Master: op=Shutter serial=129345 03:27:32 Shutter LASER open 03:27:32 Received message from Camera: op=State serial=129347 03:27:32 GetSingleValue result=40 Value=cccccccc 03:27:32 SkyScan query 03:27:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:27:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:33 Parameters OK 03:27:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:33 Set A/D data flow result=40 03:27:33 Set A/D channel type result=40 03:27:33 Set A/D encoding result=40 03:27:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:33 Set channel filter=0.000000e+000 result=40 03:27:33 Config A/D Result=40 03:27:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:33 Get A/D filter: -9.255963e+061 result=40 03:27:33 Get A/D value=-858993460 result=40 03:27:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:33 Parameters OK 03:27:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:33 Set A/D data flow result=40 03:27:33 Set A/D channel type result=40 03:27:33 Set A/D encoding result=40 03:27:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:33 Set channel filter=0.000000e+000 result=40 03:27:33 Config A/D Result=40 03:27:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:33 Get A/D filter: -9.255963e+061 result=40 03:27:33 Get A/D value=-858993460 result=40 03:27:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:33 Aux= 03:27:33 Message to Camera, serial 129347 queued 03:27:41 Received message from Master: op=Shutter serial=129357 03:27:41 Shutter LASER close 03:27:42 Received message from Master: op=PointingHead serial=129361 03:27:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:27:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:27:42 Point started: ret=0 03:27:42 point_skyscan result=0 03:27:43 Check angles 03:27:43 SkyScan query 03:27:43 SkyScan query done: ret=0 az=136.14<-9076 ze=-142.965<-21531 Statuses=0009 0009 03:27:43 Msec=0 True Az=136.14 Ze=-142.965 Az status=0009 Ze status=0009 03:27:43 Check angles 03:27:43 SkyScan query 03:27:44 SkyScan query done: ret=0 az=153.645<-10243 ze=-121.995<-20133 Statuses=0009 0009 03:27:44 Msec=750 True Az=153.645 Ze=-121.995 Az status=0009 Ze status=0009 03:27:44 Check angles 03:27:44 SkyScan query 03:27:45 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.1<-18740 Statuses=0009 0009 03:27:45 Msec=1500 True Az=171.18 Ze=-101.1 Az status=0009 Ze status=0009 03:27:45 Check angles 03:27:45 SkyScan query 03:27:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.16<-17344 Statuses=0008 0009 03:27:46 Msec=2250 True Az=176.01 Ze=-80.16 Az status=0008 Ze status=0009 03:27:46 Check angles 03:27:46 SkyScan query 03:27:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.175<-15945 Statuses=0008 0009 03:27:46 Msec=3000 True Az=176.01 Ze=-59.175 Az status=0008 Ze status=0009 03:27:46 Check angles 03:27:46 SkyScan query 03:27:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:27:47 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:27:47 Message to Master queued w/err=0: serial=129361 error=0 03:27:52 Received message from Master: op=Filter serial=129362 03:27:52 Color wheel filter change from 0 to 0 03:27:52 FLIGetFilterPos err=0 currentPosition=0 03:27:52 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:52 Filter is already there-color wheel unchanged 03:27:52 Received message from Master: op=Shutter serial=129363 03:27:52 Shutter LASER close 03:27:52 Received message from Camera: op=State serial=129365 03:27:52 GetSingleValue result=40 Value=cccccccc 03:27:52 SkyScan query 03:27:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:27:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:53 Parameters OK 03:27:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:53 Set A/D data flow result=40 03:27:53 Set A/D channel type result=40 03:27:53 Set A/D encoding result=40 03:27:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:53 Set channel filter=0.000000e+000 result=40 03:27:53 Config A/D Result=40 03:27:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:53 Get A/D filter: -9.255963e+061 result=40 03:27:53 Get A/D value=-858993460 result=40 03:27:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:53 Parameters OK 03:27:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:53 Set A/D data flow result=40 03:27:53 Set A/D channel type result=40 03:27:53 Set A/D encoding result=40 03:27:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:53 Set channel filter=0.000000e+000 result=40 03:27:53 Config A/D Result=40 03:27:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:53 Get A/D filter: -9.255963e+061 result=40 03:27:53 Get A/D value=-858993460 result=40 03:27:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:53 Aux= 03:27:53 Message to Camera, serial 129365 queued 03:28:30 Received message from Master: op=PointingHead serial=129378 03:28:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:28:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:28:30 Point started: ret=0 03:28:30 point_skyscan result=0 03:28:31 Check angles 03:28:31 SkyScan query 03:28:31 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.795<-13453 Statuses=0009 0009 03:28:31 Msec=0 True Az=152.955 Ze=-21.795 Az status=0009 Ze status=0009 03:28:32 Check angles 03:28:32 SkyScan query 03:28:32 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.81<-12054 Statuses=0009 0009 03:28:32 Msec=750 True Az=135.405 Ze=-0.81 Az status=0009 Ze status=0009 03:28:32 Check angles 03:28:32 SkyScan query 03:28:33 SkyScan query done: ret=0 az=118.035<-7869 ze=20.145<-10657 Statuses=0009 0009 03:28:33 Msec=1500 True Az=118.035 Ze=20.145 Az status=0009 Ze status=0009 03:28:33 Check angles 03:28:33 SkyScan query 03:28:34 SkyScan query done: ret=0 az=100.65<-6710 ze=41.13<-9258 Statuses=0009 0009 03:28:34 Msec=2250 True Az=100.65 Ze=41.13 Az status=0009 Ze status=0009 03:28:34 Check angles 03:28:34 SkyScan query 03:28:34 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 03:28:34 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 03:28:35 Check angles 03:28:35 SkyScan query 03:28:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:28:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:28:35 Message to Master queued w/err=0: serial=129378 error=0 03:28:40 Received message from Master: op=Filter serial=129379 03:28:40 Color wheel filter change from 0 to 0 03:28:40 FLIGetFilterPos err=0 currentPosition=0 03:28:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:40 Filter is already there-color wheel unchanged 03:28:40 Received message from Master: op=Shutter serial=129380 03:28:40 Shutter LASER close 03:28:40 Received message from Camera: op=State serial=129382 03:28:40 GetSingleValue result=40 Value=cccccccc 03:28:40 SkyScan query 03:28:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:28:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:41 Parameters OK 03:28:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:41 Set A/D data flow result=40 03:28:41 Set A/D channel type result=40 03:28:41 Set A/D encoding result=40 03:28:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:41 Set channel filter=0.000000e+000 result=40 03:28:41 Config A/D Result=40 03:28:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:41 Get A/D filter: -9.255963e+061 result=40 03:28:41 Get A/D value=-858993460 result=40 03:28:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:41 Parameters OK 03:28:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:41 Set A/D data flow result=40 03:28:41 Set A/D channel type result=40 03:28:41 Set A/D encoding result=40 03:28:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:41 Set channel filter=0.000000e+000 result=40 03:28:41 Config A/D Result=40 03:28:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:41 Get A/D filter: -9.255963e+061 result=40 03:28:41 Get A/D value=-858993460 result=40 03:28:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:41 Aux= 03:28:41 Message to Camera, serial 129382 queued 03:29:17 Received message from Master: op=PointingHead serial=129394 03:29:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:29:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:29:17 Point started: ret=0 03:29:17 point_skyscan result=0 03:29:18 Check angles 03:29:18 SkyScan query 03:29:19 SkyScan query done: ret=0 az=85.995<-5733 ze=21.495<-10567 Statuses=0008 0009 03:29:19 Msec=0 True Az=85.995 Ze=21.495 Az status=0008 Ze status=0009 03:29:19 Check angles 03:29:19 SkyScan query 03:29:20 SkyScan query done: ret=0 az=85.995<-5733 ze=0.12<-11992 Statuses=0008 0009 03:29:20 Msec=750 True Az=85.995 Ze=0.12 Az status=0008 Ze status=0009 03:29:20 Check angles 03:29:20 SkyScan query 03:29:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.835<-13389 Statuses=0008 0009 03:29:20 Msec=1500 True Az=85.995 Ze=-20.835 Az status=0008 Ze status=0009 03:29:20 Check angles 03:29:20 SkyScan query 03:29:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.775<-14785 Statuses=0008 0009 03:29:21 Msec=2250 True Az=85.995 Ze=-41.775 Az status=0008 Ze status=0009 03:29:21 Check angles 03:29:21 SkyScan query 03:29:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 03:29:22 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 03:29:22 Message to Master queued w/err=0: serial=129394 error=0 03:29:27 Received message from Master: op=Filter serial=129395 03:29:27 Color wheel filter change from 0 to 0 03:29:27 FLIGetFilterPos err=0 currentPosition=0 03:29:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:27 Filter is already there-color wheel unchanged 03:29:27 Received message from Master: op=Shutter serial=129396 03:29:27 Shutter LASER close 03:29:27 Received message from Camera: op=State serial=129398 03:29:27 GetSingleValue result=40 Value=cccccccc 03:29:27 SkyScan query 03:29:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:29:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:28 Parameters OK 03:29:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:28 Set A/D data flow result=40 03:29:28 Set A/D channel type result=40 03:29:28 Set A/D encoding result=40 03:29:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:28 Set channel filter=0.000000e+000 result=40 03:29:28 Config A/D Result=40 03:29:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:28 Get A/D filter: -9.255963e+061 result=40 03:29:28 Get A/D value=-858993460 result=40 03:29:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:28 Parameters OK 03:29:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:28 Set A/D data flow result=40 03:29:28 Set A/D channel type result=40 03:29:28 Set A/D encoding result=40 03:29:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:28 Set channel filter=0.000000e+000 result=40 03:29:28 Config A/D Result=40 03:29:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:28 Get A/D filter: -9.255963e+061 result=40 03:29:28 Get A/D value=-858993460 result=40 03:29:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:28 Aux= 03:29:28 Message to Camera, serial 129398 queued 03:30:04 Received message from Master: op=PointingHead serial=129411 03:30:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:30:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:30:05 Point started: ret=0 03:30:05 point_skyscan result=0 03:30:06 Check angles 03:30:06 SkyScan query 03:30:06 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.495<-17433 Statuses=0009 0009 03:30:06 Msec=0 True Az=109.17 Ze=-81.495 Az status=0009 Ze status=0009 03:30:06 Check angles 03:30:06 SkyScan query 03:30:07 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.465<-18831 Statuses=0008 0009 03:30:07 Msec=750 True Az=112.98 Ze=-102.465 Az status=0008 Ze status=0009 03:30:07 Check angles 03:30:07 SkyScan query 03:30:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 03:30:08 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 03:30:08 Check angles 03:30:08 SkyScan query 03:30:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 03:30:08 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 03:30:09 Check angles 03:30:09 SkyScan query 03:30:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.735<-23049 Statuses=0008 0009 03:30:09 Msec=3000 True Az=112.995 Ze=-165.735 Az status=0008 Ze status=0009 03:30:09 Check angles 03:30:09 SkyScan query 03:30:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:30:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:30:10 Message to Master queued w/err=0: serial=129411 error=0 03:30:15 Received message from Master: op=Filter serial=129412 03:30:15 Color wheel filter change from 0 to 0 03:30:15 FLIGetFilterPos err=0 currentPosition=0 03:30:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:15 Filter is already there-color wheel unchanged 03:30:15 Received message from Master: op=Shutter serial=129413 03:30:15 Shutter LASER open 03:30:15 Received message from Camera: op=State serial=129415 03:30:15 GetSingleValue result=40 Value=cccccccc 03:30:15 SkyScan query 03:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:30:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:16 Parameters OK 03:30:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:16 Set A/D data flow result=40 03:30:16 Set A/D channel type result=40 03:30:16 Set A/D encoding result=40 03:30:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:16 Set channel filter=0.000000e+000 result=40 03:30:16 Config A/D Result=40 03:30:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:16 Get A/D filter: -9.255963e+061 result=40 03:30:16 Get A/D value=-858993460 result=40 03:30:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:16 Parameters OK 03:30:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:16 Set A/D data flow result=40 03:30:16 Set A/D channel type result=40 03:30:16 Set A/D encoding result=40 03:30:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:16 Set channel filter=0.000000e+000 result=40 03:30:16 Config A/D Result=40 03:30:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:16 Get A/D filter: -9.255963e+061 result=40 03:30:16 Get A/D value=-858993460 result=40 03:30:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:16 Aux= 03:30:16 Message to Camera, serial 129415 queued 03:30:24 Received message from Master: op=Shutter serial=129425 03:30:24 Shutter LASER close 03:30:25 Received message from Master: op=PointingHead serial=129429 03:30:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:30:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:30:25 Point started: ret=0 03:30:25 point_skyscan result=0 03:30:26 Check angles 03:30:26 SkyScan query 03:30:26 SkyScan query done: ret=0 az=89.82<-5988 ze=157.2<-1520 Statuses=0009 0009 03:30:26 Msec=0 True Az=89.82 Ze=157.2 Az status=0009 Ze status=0009 03:30:27 Check angles 03:30:27 SkyScan query 03:30:27 SkyScan query done: ret=0 az=72.48<-4832 ze=136.23<-2918 Statuses=0009 0009 03:30:27 Msec=750 True Az=72.48 Ze=136.23 Az status=0009 Ze status=0009 03:30:27 Check angles 03:30:27 SkyScan query 03:30:28 SkyScan query done: ret=0 az=55.11<-3674 ze=115.305<-4313 Statuses=0009 0009 03:30:28 Msec=1500 True Az=55.11 Ze=115.305 Az status=0009 Ze status=0009 03:30:28 Check angles 03:30:28 SkyScan query 03:30:29 SkyScan query done: ret=0 az=41.01<-2734 ze=94.32<-5712 Statuses=0009 0009 03:30:29 Msec=2250 True Az=41.01 Ze=94.32 Az status=0009 Ze status=0009 03:30:29 Check angles 03:30:29 SkyScan query 03:30:29 SkyScan query done: ret=0 az=40.995<-2733 ze=73.365<-7109 Statuses=0008 0009 03:30:29 Msec=3000 True Az=40.995 Ze=73.365 Az status=0008 Ze status=0009 03:30:30 Check angles 03:30:30 SkyScan query 03:30:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.815<-8479 Statuses=0008 0009 03:30:30 Msec=3750 True Az=40.995 Ze=52.815 Az status=0008 Ze status=0009 03:30:30 Check angles 03:30:30 SkyScan query 03:30:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:30:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:30:31 Message to Master queued w/err=0: serial=129429 error=0 03:30:36 Received message from Master: op=Filter serial=129430 03:30:36 Color wheel filter change from 0 to 0 03:30:36 FLIGetFilterPos err=0 currentPosition=0 03:30:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:36 Filter is already there-color wheel unchanged 03:30:36 Received message from Master: op=Shutter serial=129431 03:30:36 Shutter LASER close 03:30:36 Received message from Camera: op=State serial=129433 03:30:36 GetSingleValue result=40 Value=cccccccc 03:30:36 SkyScan query 03:30:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:30:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:37 Parameters OK 03:30:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:37 Set A/D data flow result=40 03:30:37 Set A/D channel type result=40 03:30:37 Set A/D encoding result=40 03:30:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:37 Set channel filter=0.000000e+000 result=40 03:30:37 Config A/D Result=40 03:30:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:37 Get A/D filter: -9.255963e+061 result=40 03:30:37 Get A/D value=-858993460 result=40 03:30:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:37 Parameters OK 03:30:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:37 Set A/D data flow result=40 03:30:37 Set A/D channel type result=40 03:30:37 Set A/D encoding result=40 03:30:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:37 Set channel filter=0.000000e+000 result=40 03:30:37 Config A/D Result=40 03:30:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:37 Get A/D filter: -9.255963e+061 result=40 03:30:37 Get A/D value=-858993460 result=40 03:30:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:37 Aux= 03:30:37 Message to Camera, serial 129433 queued 03:31:14 Received message from Master: op=PointingHead serial=129446 03:31:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:31:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:31:14 Point started: ret=0 03:31:14 point_skyscan result=0 03:31:15 Check angles 03:31:15 SkyScan query 03:31:15 SkyScan query done: ret=0 az=40.995<-2733 ze=21.735<-10551 Statuses=0008 0009 03:31:15 Msec=0 True Az=40.995 Ze=21.735 Az status=0008 Ze status=0009 03:31:16 Check angles 03:31:16 SkyScan query 03:31:16 SkyScan query done: ret=0 az=40.98<-2732 ze=0.78<-11948 Statuses=0008 0009 03:31:16 Msec=750 True Az=40.98 Ze=0.78 Az status=0008 Ze status=0009 03:31:16 Check angles 03:31:16 SkyScan query 03:31:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.175<-13345 Statuses=0008 0009 03:31:17 Msec=1500 True Az=40.995 Ze=-20.175 Az status=0008 Ze status=0009 03:31:17 Check angles 03:31:17 SkyScan query 03:31:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 03:31:18 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 03:31:18 Check angles 03:31:18 SkyScan query 03:31:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:31:18 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:31:18 Message to Master queued w/err=0: serial=129446 error=0 03:31:23 Received message from Master: op=Filter serial=129447 03:31:23 Color wheel filter change from 0 to 0 03:31:23 FLIGetFilterPos err=0 currentPosition=0 03:31:23 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:23 Filter is already there-color wheel unchanged 03:31:24 Received message from Master: op=Shutter serial=129448 03:31:24 Shutter LASER close 03:31:24 Received message from Camera: op=State serial=129450 03:31:24 GetSingleValue result=40 Value=cccccccc 03:31:24 SkyScan query 03:31:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:31:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:24 Parameters OK 03:31:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:24 Set A/D data flow result=40 03:31:24 Set A/D channel type result=40 03:31:24 Set A/D encoding result=40 03:31:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:24 Set channel filter=0.000000e+000 result=40 03:31:24 Config A/D Result=40 03:31:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:24 Get A/D filter: -9.255963e+061 result=40 03:31:24 Get A/D value=-858993460 result=40 03:31:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:24 Parameters OK 03:31:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:24 Set A/D data flow result=40 03:31:24 Set A/D channel type result=40 03:31:24 Set A/D encoding result=40 03:31:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:24 Set channel filter=0.000000e+000 result=40 03:31:24 Config A/D Result=40 03:31:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:24 Get A/D filter: -9.255963e+061 result=40 03:31:24 Get A/D value=-858993460 result=40 03:31:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:24 Aux= 03:31:24 Message to Camera, serial 129450 queued 03:32:01 Received message from Master: op=PointingHead serial=129463 03:32:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:32:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:32:01 Point started: ret=0 03:32:01 point_skyscan result=0 03:32:02 Check angles 03:32:02 SkyScan query 03:32:03 SkyScan query done: ret=0 az=64.035<-4269 ze=-68.46<-16564 Statuses=0009 0009 03:32:03 Msec=0 True Az=64.035 Ze=-68.46 Az status=0009 Ze status=0009 03:32:03 Check angles 03:32:03 SkyScan query 03:32:03 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.475<-17965 Statuses=0009 0009 03:32:03 Msec=750 True Az=81.615 Ze=-89.475 Az status=0009 Ze status=0009 03:32:04 Check angles 03:32:04 SkyScan query 03:32:04 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.415<-19361 Statuses=0009 0009 03:32:04 Msec=1500 True Az=99.195 Ze=-110.415 Az status=0009 Ze status=0009 03:32:04 Check angles 03:32:04 SkyScan query 03:32:05 SkyScan query done: ret=0 az=116.955<-7797 ze=-131.79<-20786 Statuses=0009 0009 03:32:05 Msec=2250 True Az=116.955 Ze=-131.79 Az status=0009 Ze status=0009 03:32:05 Check angles 03:32:05 SkyScan query 03:32:06 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.525<-21435 Statuses=0009 0008 03:32:06 Msec=3000 True Az=131.025 Ze=-141.525 Az status=0009 Ze status=0008 03:32:06 Check angles 03:32:06 SkyScan query 03:32:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 03:32:06 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 03:32:06 Message to Master queued w/err=0: serial=129463 error=0 03:32:11 Received message from Master: op=Filter serial=129464 03:32:11 Color wheel filter change from 0 to 0 03:32:11 FLIGetFilterPos err=0 currentPosition=0 03:32:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:11 Filter is already there-color wheel unchanged 03:32:12 Received message from Master: op=Shutter serial=129465 03:32:12 Shutter LASER close 03:32:12 Received message from Camera: op=State serial=129467 03:32:12 GetSingleValue result=40 Value=cccccccc 03:32:12 SkyScan query 03:32:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:32:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:12 Parameters OK 03:32:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:12 Set A/D data flow result=40 03:32:12 Set A/D channel type result=40 03:32:12 Set A/D encoding result=40 03:32:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:12 Set channel filter=0.000000e+000 result=40 03:32:12 Config A/D Result=40 03:32:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:12 Get A/D filter: -9.255963e+061 result=40 03:32:12 Get A/D value=-858993460 result=40 03:32:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:12 Parameters OK 03:32:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:12 Set A/D data flow result=40 03:32:12 Set A/D channel type result=40 03:32:12 Set A/D encoding result=40 03:32:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:12 Set channel filter=0.000000e+000 result=40 03:32:12 Config A/D Result=40 03:32:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:12 Get A/D filter: -9.255963e+061 result=40 03:32:12 Get A/D value=-858993460 result=40 03:32:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:12 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:12 Aux= 03:32:12 Message to Camera, serial 129467 queued 03:32:49 Received message from Master: op=PointingHead serial=129480 03:32:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:32:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:32:49 Point started: ret=0 03:32:49 point_skyscan result=0 03:32:50 Check angles 03:32:50 SkyScan query 03:32:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0009 0009 03:32:51 Msec=0 True Az=112.995 Ze=-171.45 Az status=0009 Ze status=0009 03:32:51 Check angles 03:32:51 SkyScan query 03:32:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:32:52 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:32:52 Message to Master queued w/err=0: serial=129480 error=0 03:32:57 Received message from Master: op=Filter serial=129481 03:32:57 Color wheel filter change from 0 to 0 03:32:57 FLIGetFilterPos err=0 currentPosition=0 03:32:57 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:57 Filter is already there-color wheel unchanged 03:32:57 Received message from Master: op=Shutter serial=129482 03:32:57 Shutter LASER open 03:32:57 Received message from Camera: op=State serial=129484 03:32:57 GetSingleValue result=40 Value=cccccccc 03:32:57 SkyScan query 03:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:32:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:57 Parameters OK 03:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:57 Set A/D data flow result=40 03:32:57 Set A/D channel type result=40 03:32:57 Set A/D encoding result=40 03:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:57 Set channel filter=0.000000e+000 result=40 03:32:57 Config A/D Result=40 03:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:57 Get A/D filter: -9.255963e+061 result=40 03:32:57 Get A/D value=-858993460 result=40 03:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:57 Parameters OK 03:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:57 Set A/D data flow result=40 03:32:57 Set A/D channel type result=40 03:32:57 Set A/D encoding result=40 03:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:57 Set channel filter=0.000000e+000 result=40 03:32:57 Config A/D Result=40 03:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:57 Get A/D filter: -9.255963e+061 result=40 03:32:57 Get A/D value=-858993460 result=40 03:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:57 Aux= 03:32:57 Message to Camera, serial 129484 queued 03:33:06 Received message from Master: op=Shutter serial=129494 03:33:06 Shutter LASER close 03:33:07 Received message from Master: op=PointingHead serial=129498 03:33:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:33:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:33:07 Point started: ret=0 03:33:07 point_skyscan result=0 03:33:08 Check angles 03:33:08 SkyScan query 03:33:08 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.815<-21521 Statuses=0009 0009 03:33:08 Msec=0 True Az=136.38 Ze=-142.815 Az status=0009 Ze status=0009 03:33:08 Check angles 03:33:08 SkyScan query 03:33:09 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.83<-20122 Statuses=0009 0009 03:33:09 Msec=750 True Az=153.81 Ze=-121.83 Az status=0009 Ze status=0009 03:33:09 Check angles 03:33:09 SkyScan query 03:33:10 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.875<-18725 Statuses=0009 0009 03:33:10 Msec=1500 True Az=171.435 Ze=-100.875 Az status=0009 Ze status=0009 03:33:10 Check angles 03:33:10 SkyScan query 03:33:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.995<-17333 Statuses=0008 0009 03:33:11 Msec=2250 True Az=176.01 Ze=-79.995 Az status=0008 Ze status=0009 03:33:11 Check angles 03:33:11 SkyScan query 03:33:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.965<-15931 Statuses=0008 0009 03:33:11 Msec=3000 True Az=176.01 Ze=-58.965 Az status=0008 Ze status=0009 03:33:11 Check angles 03:33:11 SkyScan query 03:33:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:33:12 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:33:12 Message to Master queued w/err=0: serial=129498 error=0 03:33:17 Received message from Master: op=Filter serial=129499 03:33:17 Color wheel filter change from 0 to 0 03:33:17 FLIGetFilterPos err=0 currentPosition=0 03:33:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:17 Filter is already there-color wheel unchanged 03:33:17 Received message from Master: op=Shutter serial=129500 03:33:17 Shutter LASER close 03:33:17 Received message from Camera: op=State serial=129502 03:33:17 GetSingleValue result=40 Value=cccccccc 03:33:17 SkyScan query 03:33:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:33:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:18 Parameters OK 03:33:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:18 Set A/D data flow result=40 03:33:18 Set A/D channel type result=40 03:33:18 Set A/D encoding result=40 03:33:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:18 Set channel filter=0.000000e+000 result=40 03:33:18 Config A/D Result=40 03:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:18 Get A/D filter: -9.255963e+061 result=40 03:33:18 Get A/D value=-858993460 result=40 03:33:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:18 Parameters OK 03:33:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:18 Set A/D data flow result=40 03:33:18 Set A/D channel type result=40 03:33:18 Set A/D encoding result=40 03:33:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:18 Set channel filter=0.000000e+000 result=40 03:33:18 Config A/D Result=40 03:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:18 Get A/D filter: -9.255963e+061 result=40 03:33:18 Get A/D value=-858993460 result=40 03:33:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:18 Aux= 03:33:18 Message to Camera, serial 129502 queued 03:33:55 Received message from Master: op=PointingHead serial=129515 03:33:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:33:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:33:55 Point started: ret=0 03:33:55 point_skyscan result=0 03:33:56 Check angles 03:33:56 SkyScan query 03:33:56 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.69<-13446 Statuses=0009 0009 03:33:56 Msec=0 True Az=152.925 Ze=-21.69 Az status=0009 Ze status=0009 03:33:57 Check angles 03:33:57 SkyScan query 03:33:57 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.72<-12048 Statuses=0009 0009 03:33:57 Msec=750 True Az=135.42 Ze=-0.72 Az status=0009 Ze status=0009 03:33:57 Check angles 03:33:57 SkyScan query 03:33:58 SkyScan query done: ret=0 az=117.84<-7856 ze=20.235<-10651 Statuses=0009 0009 03:33:58 Msec=1500 True Az=117.84 Ze=20.235 Az status=0009 Ze status=0009 03:33:58 Check angles 03:33:58 SkyScan query 03:33:59 SkyScan query done: ret=0 az=100.215<-6681 ze=41.64<-9224 Statuses=0009 0009 03:33:59 Msec=2250 True Az=100.215 Ze=41.64 Az status=0009 Ze status=0009 03:33:59 Check angles 03:33:59 SkyScan query 03:34:00 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 03:34:00 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 03:34:00 Check angles 03:34:00 SkyScan query 03:34:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:34:00 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:34:00 Message to Master queued w/err=0: serial=129515 error=0 03:34:05 Received message from Master: op=Filter serial=129516 03:34:05 Color wheel filter change from 0 to 0 03:34:05 FLIGetFilterPos err=0 currentPosition=0 03:34:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:05 Filter is already there-color wheel unchanged 03:34:05 Received message from Master: op=Shutter serial=129517 03:34:05 Shutter LASER close 03:34:05 Received message from Camera: op=State serial=129519 03:34:05 GetSingleValue result=40 Value=cccccccc 03:34:05 SkyScan query 03:34:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:34:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:06 Parameters OK 03:34:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:06 Set A/D data flow result=40 03:34:06 Set A/D channel type result=40 03:34:06 Set A/D encoding result=40 03:34:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:06 Set channel filter=0.000000e+000 result=40 03:34:06 Config A/D Result=40 03:34:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:06 Get A/D filter: -9.255963e+061 result=40 03:34:06 Get A/D value=-858993460 result=40 03:34:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:06 Parameters OK 03:34:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:06 Set A/D data flow result=40 03:34:06 Set A/D channel type result=40 03:34:06 Set A/D encoding result=40 03:34:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:06 Set channel filter=0.000000e+000 result=40 03:34:06 Config A/D Result=40 03:34:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:06 Get A/D filter: -9.255963e+061 result=40 03:34:06 Get A/D value=-858993460 result=40 03:34:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:06 Aux= 03:34:06 Message to Camera, serial 129519 queued 03:34:43 Received message from Master: op=PointingHead serial=129532 03:34:43 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:34:43 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:34:43 Point started: ret=0 03:34:43 point_skyscan result=0 03:34:44 Check angles 03:34:44 SkyScan query 03:34:45 SkyScan query done: ret=0 az=85.995<-5733 ze=21.96<-10536 Statuses=0008 0009 03:34:45 Msec=0 True Az=85.995 Ze=21.96 Az status=0008 Ze status=0009 03:34:45 Check angles 03:34:45 SkyScan query 03:34:45 SkyScan query done: ret=0 az=85.995<-5733 ze=1.005<-11933 Statuses=0008 0009 03:34:45 Msec=750 True Az=85.995 Ze=1.005 Az status=0008 Ze status=0009 03:34:46 Check angles 03:34:46 SkyScan query 03:34:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-19.95<-13330 Statuses=0008 0009 03:34:46 Msec=1500 True Az=85.995 Ze=-19.95 Az status=0008 Ze status=0009 03:34:46 Check angles 03:34:46 SkyScan query 03:34:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.905<-14727 Statuses=0008 0009 03:34:47 Msec=2250 True Az=85.995 Ze=-40.905 Az status=0008 Ze status=0009 03:34:47 Check angles 03:34:47 SkyScan query 03:34:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 03:34:48 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 03:34:48 Message to Master queued w/err=0: serial=129532 error=0 03:34:53 Received message from Master: op=Filter serial=129533 03:34:53 Color wheel filter change from 0 to 0 03:34:53 FLIGetFilterPos err=0 currentPosition=0 03:34:53 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:53 Filter is already there-color wheel unchanged 03:34:53 Received message from Master: op=Shutter serial=129534 03:34:53 Shutter LASER close 03:34:53 Received message from Camera: op=State serial=129536 03:34:53 GetSingleValue result=40 Value=cccccccc 03:34:53 SkyScan query 03:34:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:34:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:53 Parameters OK 03:34:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:53 Set A/D data flow result=40 03:34:53 Set A/D channel type result=40 03:34:53 Set A/D encoding result=40 03:34:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:53 Set channel filter=0.000000e+000 result=40 03:34:53 Config A/D Result=40 03:34:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:53 Get A/D filter: -9.255963e+061 result=40 03:34:53 Get A/D value=-858993460 result=40 03:34:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:53 Parameters OK 03:34:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:53 Set A/D data flow result=40 03:34:53 Set A/D channel type result=40 03:34:53 Set A/D encoding result=40 03:34:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:53 Set channel filter=0.000000e+000 result=40 03:34:53 Config A/D Result=40 03:34:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:53 Get A/D filter: -9.255963e+061 result=40 03:34:53 Get A/D value=-858993460 result=40 03:34:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:53 Aux= 03:34:53 Message to Camera, serial 129536 queued 03:35:30 Received message from Master: op=PointingHead serial=129549 03:35:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:35:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:35:31 Point started: ret=0 03:35:31 point_skyscan result=0 03:35:31 Check angles 03:35:31 SkyScan query 03:35:32 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.615<-17441 Statuses=0009 0009 03:35:32 Msec=0 True Az=109.35 Ze=-81.615 Az status=0009 Ze status=0009 03:35:32 Check angles 03:35:32 SkyScan query 03:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.6<-18840 Statuses=0008 0009 03:35:33 Msec=750 True Az=112.995 Ze=-102.6 Az status=0008 Ze status=0009 03:35:33 Check angles 03:35:33 SkyScan query 03:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.555<-20237 Statuses=0008 0009 03:35:34 Msec=1500 True Az=112.995 Ze=-123.555 Az status=0008 Ze status=0009 03:35:34 Check angles 03:35:34 SkyScan query 03:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 03:35:34 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 03:35:34 Check angles 03:35:34 SkyScan query 03:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.45<-23030 Statuses=0008 0009 03:35:35 Msec=3000 True Az=112.995 Ze=-165.45 Az status=0008 Ze status=0009 03:35:35 Check angles 03:35:35 SkyScan query 03:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:35:36 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:35:36 Message to Master queued w/err=0: serial=129549 error=0 03:35:41 Received message from Master: op=Filter serial=129550 03:35:41 Color wheel filter change from 0 to 0 03:35:41 FLIGetFilterPos err=0 currentPosition=0 03:35:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:35:41 Filter is already there-color wheel unchanged [UTC 2018-12-14 03:35:41] 03:35:41 Received message from Master: op=Shutter serial=129551 03:35:41 Shutter LASER open 03:35:41 Received message from Camera: op=State serial=129553 03:35:41 GetSingleValue result=40 Value=cccccccc 03:35:41 SkyScan query 03:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:35:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:42 Parameters OK 03:35:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:42 Set A/D data flow result=40 03:35:42 Set A/D channel type result=40 03:35:42 Set A/D encoding result=40 03:35:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:42 Set channel filter=0.000000e+000 result=40 03:35:42 Config A/D Result=40 03:35:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:42 Get A/D filter: -9.255963e+061 result=40 03:35:42 Get A/D value=-858993460 result=40 03:35:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:42 Parameters OK 03:35:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:42 Set A/D data flow result=40 03:35:42 Set A/D channel type result=40 03:35:42 Set A/D encoding result=40 03:35:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:42 Set channel filter=0.000000e+000 result=40 03:35:42 Config A/D Result=40 03:35:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:42 Get A/D filter: -9.255963e+061 result=40 03:35:42 Get A/D value=-858993460 result=40 03:35:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:35:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:35:42 Aux= 03:35:42 Message to Camera, serial 129553 queued 03:35:50 Received message from Master: op=Shutter serial=129563 03:35:50 Shutter LASER close 03:35:51 Received message from Master: op=PointingHead serial=129567 03:35:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:35:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:35:51 Point started: ret=0 03:35:51 point_skyscan result=0 03:35:52 Check angles 03:35:52 SkyScan query 03:35:52 SkyScan query done: ret=0 az=89.61<-5974 ze=156.945<-1537 Statuses=0009 0009 03:35:52 Msec=0 True Az=89.61 Ze=156.945 Az status=0009 Ze status=0009 [UTC 2018-12-14 03:35:52] 03:35:52 Check angles 03:35:52 SkyScan query 03:35:53 SkyScan query done: ret=0 az=71.775<-4785 ze=135.555<-2963 Statuses=0009 0009 03:35:53 Msec=750 True Az=71.775 Ze=135.555 Az status=0009 Ze status=0009 03:35:53 Check angles 03:35:53 SkyScan query 03:35:54 SkyScan query done: ret=0 az=54.405<-3627 ze=114.585<-4361 Statuses=0009 0009 03:35:54 Msec=1500 True Az=54.405 Ze=114.585 Az status=0009 Ze status=0009 03:35:54 Check angles 03:35:54 SkyScan query 03:35:55 SkyScan query done: ret=0 az=41.025<-2735 ze=93.63<-5758 Statuses=0009 0009 03:35:55 Msec=2250 True Az=41.025 Ze=93.63 Az status=0009 Ze status=0009 03:35:55 Check angles 03:35:55 SkyScan query 03:35:55 SkyScan query done: ret=0 az=40.995<-2733 ze=72.675<-7155 Statuses=0008 0009 03:35:55 Msec=3000 True Az=40.995 Ze=72.675 Az status=0008 Ze status=0009 03:35:55 Check angles 03:35:55 SkyScan query 03:35:56 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 03:35:56 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 03:35:56 Check angles 03:35:56 SkyScan query 03:35:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:35:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:35:57 Message to Master queued w/err=0: serial=129567 error=0 03:36:02 Received message from Master: op=Filter serial=129568 03:36:02 Color wheel filter change from 0 to 0 03:36:02 FLIGetFilterPos err=0 currentPosition=0 03:36:02 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:02 Filter is already there-color wheel unchanged 03:36:02 Received message from Master: op=Shutter serial=129569 03:36:02 Shutter LASER close 03:36:02 Received message from Camera: op=State serial=129571 03:36:02 GetSingleValue result=40 Value=cccccccc 03:36:02 SkyScan query 03:36:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:36:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:03 Parameters OK 03:36:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:03 Set A/D data flow result=40 03:36:03 Set A/D channel type result=40 03:36:03 Set A/D encoding result=40 03:36:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:03 Set channel filter=0.000000e+000 result=40 03:36:03 Config A/D Result=40 03:36:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:03 Get A/D filter: -9.255963e+061 result=40 03:36:03 Get A/D value=-858993460 result=40 03:36:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:03 Parameters OK 03:36:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:03 Set A/D data flow result=40 03:36:03 Set A/D channel type result=40 03:36:03 Set A/D encoding result=40 03:36:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:03 Set channel filter=0.000000e+000 result=40 03:36:03 Config A/D Result=40 03:36:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:03 Get A/D filter: -9.255963e+061 result=40 03:36:03 Get A/D value=-858993460 result=40 03:36:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:03 Aux= 03:36:03 Message to Camera, serial 129571 queued 03:36:40 Received message from Master: op=PointingHead serial=129584 03:36:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:36:40 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:36:40 Point started: ret=0 03:36:40 point_skyscan result=0 03:36:41 Check angles 03:36:41 SkyScan query 03:36:41 SkyScan query done: ret=0 az=40.995<-2733 ze=21.195<-10587 Statuses=0008 0009 03:36:41 Msec=0 True Az=40.995 Ze=21.195 Az status=0008 Ze status=0009 03:36:41 Check angles 03:36:41 SkyScan query 03:36:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.21<-12014 Statuses=0008 0009 03:36:42 Msec=750 True Az=40.995 Ze=-0.21 Az status=0008 Ze status=0009 03:36:42 Check angles 03:36:42 SkyScan query 03:36:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.165<-13411 Statuses=0008 0009 03:36:43 Msec=1500 True Az=40.995 Ze=-21.165 Az status=0008 Ze status=0009 03:36:43 Check angles 03:36:43 SkyScan query 03:36:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:36:44 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:36:44 Check angles 03:36:44 SkyScan query 03:36:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 03:36:44 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 03:36:44 Message to Master queued w/err=0: serial=129584 error=0 03:36:49 Received message from Master: op=Filter serial=129585 03:36:49 Color wheel filter change from 0 to 0 03:36:49 FLIGetFilterPos err=0 currentPosition=0 03:36:49 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:49 Filter is already there-color wheel unchanged 03:36:49 Received message from Master: op=Shutter serial=129586 03:36:49 Shutter LASER close 03:36:50 Received message from Camera: op=State serial=129588 03:36:50 GetSingleValue result=40 Value=cccccccc 03:36:50 SkyScan query 03:36:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:36:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:50 Parameters OK 03:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:50 Set A/D data flow result=40 03:36:50 Set A/D channel type result=40 03:36:50 Set A/D encoding result=40 03:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:50 Set channel filter=0.000000e+000 result=40 03:36:50 Config A/D Result=40 03:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:50 Get A/D filter: -9.255963e+061 result=40 03:36:50 Get A/D value=-858993460 result=40 03:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:50 Parameters OK 03:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:50 Set A/D data flow result=40 03:36:50 Set A/D channel type result=40 03:36:50 Set A/D encoding result=40 03:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:50 Set channel filter=0.000000e+000 result=40 03:36:50 Config A/D Result=40 03:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:50 Get A/D filter: -9.255963e+061 result=40 03:36:50 Get A/D value=-858993460 result=40 03:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:50 Aux= 03:36:50 Message to Camera, serial 129588 queued 03:37:27 Received message from Master: op=PointingHead serial=129601 03:37:27 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:37:27 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:37:27 Point started: ret=0 03:37:27 point_skyscan result=0 03:37:28 Check angles 03:37:28 SkyScan query 03:37:29 SkyScan query done: ret=0 az=64.125<-4275 ze=-68.535<-16569 Statuses=0009 0009 03:37:29 Msec=0 True Az=64.125 Ze=-68.535 Az status=0009 Ze status=0009 03:37:29 Check angles 03:37:29 SkyScan query 03:37:29 SkyScan query done: ret=0 az=82.125<-5475 ze=-89.88<-17992 Statuses=0009 0009 03:37:29 Msec=750 True Az=82.125 Ze=-89.88 Az status=0009 Ze status=0009 03:37:30 Check angles 03:37:30 SkyScan query 03:37:30 SkyScan query done: ret=0 az=99.54<-6636 ze=-110.88<-19392 Statuses=0009 0009 03:37:30 Msec=1500 True Az=99.54 Ze=-110.88 Az status=0009 Ze status=0009 03:37:30 Check angles 03:37:30 SkyScan query 03:37:31 SkyScan query done: ret=0 az=116.955<-7797 ze=-131.805<-20787 Statuses=0009 0009 03:37:31 Msec=2250 True Az=116.955 Ze=-131.805 Az status=0009 Ze status=0009 03:37:31 Check angles 03:37:31 SkyScan query 03:37:32 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 03:37:32 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 03:37:32 Check angles 03:37:32 SkyScan query 03:37:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 03:37:33 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 03:37:33 Message to Master queued w/err=0: serial=129601 error=0 03:37:38 Received message from Master: op=Filter serial=129602 03:37:38 Color wheel filter change from 0 to 0 03:37:38 FLIGetFilterPos err=0 currentPosition=0 03:37:38 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:38 Filter is already there-color wheel unchanged 03:37:38 Received message from Master: op=Shutter serial=129603 03:37:38 Shutter LASER close 03:37:38 Received message from Camera: op=State serial=129605 03:37:38 GetSingleValue result=40 Value=cccccccc 03:37:38 SkyScan query 03:37:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:37:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:38 Parameters OK 03:37:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:38 Set A/D data flow result=40 03:37:38 Set A/D channel type result=40 03:37:38 Set A/D encoding result=40 03:37:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:38 Set channel filter=0.000000e+000 result=40 03:37:38 Config A/D Result=40 03:37:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:38 Get A/D filter: -9.255963e+061 result=40 03:37:38 Get A/D value=-858993460 result=40 03:37:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:38 Parameters OK 03:37:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:38 Set A/D data flow result=40 03:37:38 Set A/D channel type result=40 03:37:38 Set A/D encoding result=40 03:37:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:38 Set channel filter=0.000000e+000 result=40 03:37:38 Config A/D Result=40 03:37:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:38 Get A/D filter: -9.255963e+061 result=40 03:37:38 Get A/D value=-858993460 result=40 03:37:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:38 Aux= 03:37:38 Message to Camera, serial 129605 queued 03:38:15 Received message from Master: op=PointingHead serial=129618 03:38:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:38:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:38:15 Point started: ret=0 03:38:15 point_skyscan result=0 03:38:16 Check angles 03:38:16 SkyScan query 03:38:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 03:38:17 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 03:38:17 Check angles 03:38:17 SkyScan query 03:38:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:38:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:38:18 Message to Master queued w/err=0: serial=129618 error=0 03:38:23 Received message from Master: op=Filter serial=129619 03:38:23 Color wheel filter change from 0 to 0 03:38:23 FLIGetFilterPos err=0 currentPosition=0 03:38:23 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:23 Filter is already there-color wheel unchanged 03:38:23 Received message from Master: op=Shutter serial=129620 03:38:23 Shutter LASER open 03:38:23 Received message from Camera: op=State serial=129622 03:38:23 GetSingleValue result=40 Value=cccccccc 03:38:23 SkyScan query 03:38:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:38:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:23 Parameters OK 03:38:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:23 Set A/D data flow result=40 03:38:23 Set A/D channel type result=40 03:38:23 Set A/D encoding result=40 03:38:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:23 Set channel filter=0.000000e+000 result=40 03:38:23 Config A/D Result=40 03:38:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:23 Get A/D filter: -9.255963e+061 result=40 03:38:23 Get A/D value=-858993460 result=40 03:38:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:23 Parameters OK 03:38:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:23 Set A/D data flow result=40 03:38:23 Set A/D channel type result=40 03:38:23 Set A/D encoding result=40 03:38:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:23 Set channel filter=0.000000e+000 result=40 03:38:23 Config A/D Result=40 03:38:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:23 Get A/D filter: -9.255963e+061 result=40 03:38:23 Get A/D value=-858993460 result=40 03:38:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:23 Aux= 03:38:23 Message to Camera, serial 129622 queued 03:38:32 Received message from Master: op=Shutter serial=129632 03:38:32 Shutter LASER close 03:38:32 Received message from Master: op=PointingHead serial=129636 03:38:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:38:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:38:33 Point started: ret=0 03:38:33 point_skyscan result=0 03:38:34 Check angles 03:38:34 SkyScan query 03:38:34 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.505<-21567 Statuses=0009 0009 03:38:34 Msec=0 True Az=135.825 Ze=-143.505 Az status=0009 Ze status=0009 03:38:34 Check angles 03:38:34 SkyScan query 03:38:35 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.07<-20138 Statuses=0009 0009 03:38:35 Msec=750 True Az=153.63 Ze=-122.07 Az status=0009 Ze status=0009 03:38:35 Check angles 03:38:35 SkyScan query 03:38:36 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.19<-18746 Statuses=0009 0009 03:38:36 Msec=1500 True Az=171.24 Ze=-101.19 Az status=0009 Ze status=0009 03:38:36 Check angles 03:38:36 SkyScan query 03:38:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.77<-17318 Statuses=0008 0009 03:38:36 Msec=2250 True Az=176.01 Ze=-79.77 Az status=0008 Ze status=0009 03:38:37 Check angles 03:38:37 SkyScan query 03:38:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.77<-15918 Statuses=0008 0009 03:38:37 Msec=3000 True Az=176.01 Ze=-58.77 Az status=0008 Ze status=0009 03:38:37 Check angles 03:38:37 SkyScan query 03:38:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:38:38 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:38:38 Message to Master queued w/err=0: serial=129636 error=0 03:38:43 Received message from Master: op=Filter serial=129637 03:38:43 Color wheel filter change from 0 to 0 03:38:43 FLIGetFilterPos err=0 currentPosition=0 03:38:43 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:43 Filter is already there-color wheel unchanged 03:38:43 Received message from Master: op=Shutter serial=129638 03:38:43 Shutter LASER close 03:38:43 Received message from Camera: op=State serial=129640 03:38:43 GetSingleValue result=40 Value=cccccccc 03:38:43 SkyScan query 03:38:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:38:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:44 Parameters OK 03:38:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:44 Set A/D data flow result=40 03:38:44 Set A/D channel type result=40 03:38:44 Set A/D encoding result=40 03:38:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:44 Set channel filter=0.000000e+000 result=40 03:38:44 Config A/D Result=40 03:38:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:44 Get A/D filter: -9.255963e+061 result=40 03:38:44 Get A/D value=-858993460 result=40 03:38:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:44 Parameters OK 03:38:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:44 Set A/D data flow result=40 03:38:44 Set A/D channel type result=40 03:38:44 Set A/D encoding result=40 03:38:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:44 Set channel filter=0.000000e+000 result=40 03:38:44 Config A/D Result=40 03:38:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:44 Get A/D filter: -9.255963e+061 result=40 03:38:44 Get A/D value=-858993460 result=40 03:38:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:44 Aux= 03:38:44 Message to Camera, serial 129640 queued 03:39:21 Received message from Master: op=PointingHead serial=129653 03:39:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:39:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:39:21 Point started: ret=0 03:39:21 point_skyscan result=0 03:39:22 Check angles 03:39:22 SkyScan query 03:39:22 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.795<-13453 Statuses=0009 0009 03:39:22 Msec=0 True Az=152.955 Ze=-21.795 Az status=0009 Ze status=0009 03:39:23 Check angles 03:39:23 SkyScan query 03:39:23 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.795<-12053 Statuses=0009 0009 03:39:23 Msec=750 True Az=135.57 Ze=-0.795 Az status=0009 Ze status=0009 03:39:23 Check angles 03:39:23 SkyScan query 03:39:24 SkyScan query done: ret=0 az=118.005<-7867 ze=20.115<-10659 Statuses=0009 0009 03:39:24 Msec=1500 True Az=118.005 Ze=20.115 Az status=0009 Ze status=0009 03:39:24 Check angles 03:39:24 SkyScan query 03:39:25 SkyScan query done: ret=0 az=100.62<-6708 ze=41.115<-9259 Statuses=0009 0009 03:39:25 Msec=2250 True Az=100.62 Ze=41.115 Az status=0009 Ze status=0009 03:39:25 Check angles 03:39:25 SkyScan query 03:39:25 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 03:39:25 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 03:39:26 Check angles 03:39:26 SkyScan query 03:39:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:39:26 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:39:26 Message to Master queued w/err=0: serial=129653 error=0 03:39:31 Received message from Master: op=Filter serial=129654 03:39:31 Color wheel filter change from 0 to 0 03:39:31 FLIGetFilterPos err=0 currentPosition=0 03:39:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:31 Filter is already there-color wheel unchanged 03:39:31 Received message from Master: op=Shutter serial=129655 03:39:31 Shutter LASER close 03:39:31 Received message from Camera: op=State serial=129657 03:39:31 GetSingleValue result=40 Value=cccccccc 03:39:31 SkyScan query 03:39:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:39:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:32 Parameters OK 03:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:32 Set A/D data flow result=40 03:39:32 Set A/D channel type result=40 03:39:32 Set A/D encoding result=40 03:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:32 Set channel filter=0.000000e+000 result=40 03:39:32 Config A/D Result=40 03:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:32 Get A/D filter: -9.255963e+061 result=40 03:39:32 Get A/D value=-858993460 result=40 03:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:32 Parameters OK 03:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:32 Set A/D data flow result=40 03:39:32 Set A/D channel type result=40 03:39:32 Set A/D encoding result=40 03:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:32 Set channel filter=0.000000e+000 result=40 03:39:32 Config A/D Result=40 03:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:32 Get A/D filter: -9.255963e+061 result=40 03:39:32 Get A/D value=-858993460 result=40 03:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:32 Aux= 03:39:32 Message to Camera, serial 129657 queued 03:40:09 Received message from Master: op=PointingHead serial=129670 03:40:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:40:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:40:09 Point started: ret=0 03:40:09 point_skyscan result=0 03:40:10 Check angles 03:40:10 SkyScan query 03:40:11 SkyScan query done: ret=0 az=85.995<-5733 ze=21.465<-10569 Statuses=0008 0009 03:40:11 Msec=0 True Az=85.995 Ze=21.465 Az status=0008 Ze status=0009 03:40:11 Check angles 03:40:11 SkyScan query 03:40:11 SkyScan query done: ret=0 az=85.995<-5733 ze=0.54<-11964 Statuses=0008 0009 03:40:11 Msec=750 True Az=85.995 Ze=0.54 Az status=0008 Ze status=0009 03:40:11 Check angles 03:40:11 SkyScan query 03:40:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.445<-13363 Statuses=0008 0009 03:40:12 Msec=1500 True Az=85.995 Ze=-20.445 Az status=0008 Ze status=0009 03:40:12 Check angles 03:40:12 SkyScan query 03:40:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.31<-14754 Statuses=0008 0009 03:40:13 Msec=2250 True Az=85.995 Ze=-41.31 Az status=0008 Ze status=0009 03:40:13 Check angles 03:40:13 SkyScan query 03:40:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 03:40:14 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 03:40:14 Message to Master queued w/err=0: serial=129670 error=0 03:40:19 Received message from Master: op=Filter serial=129671 03:40:19 Color wheel filter change from 0 to 0 03:40:19 FLIGetFilterPos err=0 currentPosition=0 03:40:19 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:19 Filter is already there-color wheel unchanged 03:40:19 Received message from Master: op=Shutter serial=129672 03:40:19 Shutter LASER close 03:40:19 Received message from Camera: op=State serial=129674 03:40:19 GetSingleValue result=40 Value=cccccccc 03:40:19 SkyScan query 03:40:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:40:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:19 Parameters OK 03:40:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:19 Set A/D data flow result=40 03:40:19 Set A/D channel type result=40 03:40:19 Set A/D encoding result=40 03:40:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:19 Set channel filter=0.000000e+000 result=40 03:40:19 Config A/D Result=40 03:40:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:19 Get A/D filter: -9.255963e+061 result=40 03:40:19 Get A/D value=-858993460 result=40 03:40:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:19 Parameters OK 03:40:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:19 Set A/D data flow result=40 03:40:19 Set A/D channel type result=40 03:40:19 Set A/D encoding result=40 03:40:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:19 Set channel filter=0.000000e+000 result=40 03:40:19 Config A/D Result=40 03:40:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:19 Get A/D filter: -9.255963e+061 result=40 03:40:19 Get A/D value=-858993460 result=40 03:40:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:19 Aux= 03:40:19 Message to Camera, serial 129674 queued 03:40:56 Received message from Master: op=PointingHead serial=129687 03:40:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:40:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:40:57 Point started: ret=0 03:40:57 point_skyscan result=0 03:40:57 Check angles 03:40:57 SkyScan query 03:40:58 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.015<-17401 Statuses=0009 0009 03:40:58 Msec=0 True Az=108.9 Ze=-81.015 Az status=0009 Ze status=0009 03:40:58 Check angles 03:40:58 SkyScan query 03:40:59 SkyScan query done: ret=0 az=112.98<-7532 ze=-101.985<-18799 Statuses=0008 0009 03:40:59 Msec=750 True Az=112.98 Ze=-101.985 Az status=0008 Ze status=0009 03:40:59 Check angles 03:40:59 SkyScan query 03:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.925<-20195 Statuses=0008 0009 03:40:59 Msec=1500 True Az=112.995 Ze=-122.925 Az status=0008 Ze status=0009 03:41:00 Check angles 03:41:00 SkyScan query 03:41:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.88<-21592 Statuses=0008 0009 03:41:00 Msec=2250 True Az=112.995 Ze=-143.88 Az status=0008 Ze status=0009 03:41:00 Check angles 03:41:00 SkyScan query 03:41:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.835<-22989 Statuses=0008 0009 03:41:01 Msec=3000 True Az=112.995 Ze=-164.835 Az status=0008 Ze status=0009 03:41:01 Check angles 03:41:01 SkyScan query 03:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:41:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:41:02 Message to Master queued w/err=0: serial=129687 error=0 03:41:07 Received message from Master: op=Filter serial=129688 03:41:07 Color wheel filter change from 0 to 0 03:41:07 FLIGetFilterPos err=0 currentPosition=0 03:41:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:07 Filter is already there-color wheel unchanged 03:41:07 Received message from Master: op=Shutter serial=129689 03:41:07 Shutter LASER open 03:41:07 Received message from Camera: op=State serial=129691 03:41:07 GetSingleValue result=40 Value=cccccccc 03:41:07 SkyScan query 03:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:41:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:08 Parameters OK 03:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:08 Set A/D data flow result=40 03:41:08 Set A/D channel type result=40 03:41:08 Set A/D encoding result=40 03:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:08 Set channel filter=0.000000e+000 result=40 03:41:08 Config A/D Result=40 03:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:08 Get A/D filter: -9.255963e+061 result=40 03:41:08 Get A/D value=-858993460 result=40 03:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:08 Parameters OK 03:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:08 Set A/D data flow result=40 03:41:08 Set A/D channel type result=40 03:41:08 Set A/D encoding result=40 03:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:08 Set channel filter=0.000000e+000 result=40 03:41:08 Config A/D Result=40 03:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:08 Get A/D filter: -9.255963e+061 result=40 03:41:08 Get A/D value=-858993460 result=40 03:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:08 Aux= 03:41:08 Message to Camera, serial 129691 queued 03:41:16 Received message from Master: op=Shutter serial=129701 03:41:16 Shutter LASER close 03:41:16 Received message from Master: op=PointingHead serial=129705 03:41:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:41:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:41:17 Point started: ret=0 03:41:17 point_skyscan result=0 03:41:17 Check angles 03:41:17 SkyScan query 03:41:18 SkyScan query done: ret=0 az=89.835<-5989 ze=157.14<-1524 Statuses=0009 0009 03:41:18 Msec=0 True Az=89.835 Ze=157.14 Az status=0009 Ze status=0009 03:41:18 Check angles 03:41:18 SkyScan query 03:41:19 SkyScan query done: ret=0 az=72.42<-4828 ze=136.155<-2923 Statuses=0009 0009 03:41:19 Msec=750 True Az=72.42 Ze=136.155 Az status=0009 Ze status=0009 03:41:19 Check angles 03:41:19 SkyScan query 03:41:20 SkyScan query done: ret=0 az=55.08<-3672 ze=115.245<-4317 Statuses=0009 0009 03:41:20 Msec=1500 True Az=55.08 Ze=115.245 Az status=0009 Ze status=0009 03:41:20 Check angles 03:41:20 SkyScan query 03:41:20 SkyScan query done: ret=0 az=41.025<-2735 ze=94.23<-5718 Statuses=0009 0009 03:41:20 Msec=2250 True Az=41.025 Ze=94.23 Az status=0009 Ze status=0009 03:41:20 Check angles 03:41:20 SkyScan query 03:41:21 SkyScan query done: ret=0 az=40.995<-2733 ze=73.305<-7113 Statuses=0008 0009 03:41:21 Msec=3000 True Az=40.995 Ze=73.305 Az status=0008 Ze status=0009 03:41:21 Check angles 03:41:21 SkyScan query 03:41:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.755<-8483 Statuses=0008 0009 03:41:22 Msec=3750 True Az=40.995 Ze=52.755 Az status=0008 Ze status=0009 03:41:22 Check angles 03:41:22 SkyScan query 03:41:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:41:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:41:23 Message to Master queued w/err=0: serial=129705 error=0 03:41:28 Received message from Master: op=Filter serial=129706 03:41:28 Color wheel filter change from 0 to 0 03:41:28 FLIGetFilterPos err=0 currentPosition=0 03:41:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:28 Filter is already there-color wheel unchanged 03:41:28 Received message from Master: op=Shutter serial=129707 03:41:28 Shutter LASER close 03:41:28 Received message from Camera: op=State serial=129709 03:41:28 GetSingleValue result=40 Value=cccccccc 03:41:28 SkyScan query 03:41:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:41:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:28 Parameters OK 03:41:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:28 Set A/D data flow result=40 03:41:28 Set A/D channel type result=40 03:41:28 Set A/D encoding result=40 03:41:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:28 Set channel filter=0.000000e+000 result=40 03:41:28 Config A/D Result=40 03:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:28 Get A/D filter: -9.255963e+061 result=40 03:41:28 Get A/D value=-858993460 result=40 03:41:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:28 Parameters OK 03:41:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:28 Set A/D data flow result=40 03:41:28 Set A/D channel type result=40 03:41:28 Set A/D encoding result=40 03:41:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:28 Set channel filter=0.000000e+000 result=40 03:41:28 Config A/D Result=40 03:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:28 Get A/D filter: -9.255963e+061 result=40 03:41:28 Get A/D value=-858993460 result=40 03:41:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:28 Aux= 03:41:28 Message to Camera, serial 129709 queued 03:42:05 Received message from Master: op=PointingHead serial=129721 03:42:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:42:05 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:42:05 Point started: ret=0 03:42:05 point_skyscan result=0 03:42:06 Check angles 03:42:06 SkyScan query 03:42:06 SkyScan query done: ret=0 az=40.995<-2733 ze=21.6<-10560 Statuses=0008 0009 03:42:06 Msec=0 True Az=40.995 Ze=21.6 Az status=0008 Ze status=0009 03:42:06 Check angles 03:42:06 SkyScan query 03:42:07 SkyScan query done: ret=0 az=40.995<-2733 ze=0.615<-11959 Statuses=0008 0009 03:42:07 Msec=750 True Az=40.995 Ze=0.615 Az status=0008 Ze status=0009 03:42:07 Check angles 03:42:07 SkyScan query 03:42:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.325<-13355 Statuses=0008 0009 03:42:08 Msec=1500 True Az=40.995 Ze=-20.325 Az status=0008 Ze status=0009 03:42:08 Check angles 03:42:08 SkyScan query 03:42:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 03:42:09 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 03:42:09 Check angles 03:42:09 SkyScan query 03:42:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 03:42:09 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 03:42:09 Message to Master queued w/err=0: serial=129721 error=0 03:42:14 Received message from Master: op=Filter serial=129722 03:42:14 Color wheel filter change from 0 to 0 03:42:14 FLIGetFilterPos err=0 currentPosition=0 03:42:14 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:14 Filter is already there-color wheel unchanged 03:42:14 Received message from Master: op=Shutter serial=129723 03:42:14 Shutter LASER close 03:42:14 Received message from Camera: op=State serial=129725 03:42:14 GetSingleValue result=40 Value=cccccccc 03:42:14 SkyScan query 03:42:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:42:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:15 Parameters OK 03:42:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:15 Set A/D data flow result=40 03:42:15 Set A/D channel type result=40 03:42:15 Set A/D encoding result=40 03:42:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:15 Set channel filter=0.000000e+000 result=40 03:42:15 Config A/D Result=40 03:42:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:15 Get A/D filter: -9.255963e+061 result=40 03:42:15 Get A/D value=-858993460 result=40 03:42:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:15 Parameters OK 03:42:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:15 Set A/D data flow result=40 03:42:15 Set A/D channel type result=40 03:42:15 Set A/D encoding result=40 03:42:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:15 Set channel filter=0.000000e+000 result=40 03:42:15 Config A/D Result=40 03:42:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:15 Get A/D filter: -9.255963e+061 result=40 03:42:15 Get A/D value=-858993460 result=40 03:42:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:42:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:42:15 Aux= 03:42:15 Message to Camera, serial 129725 queued 03:42:52 Received message from Master: op=PointingHead serial=129738 03:42:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:42:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:42:52 Point started: ret=0 03:42:52 point_skyscan result=0 03:42:53 Check angles 03:42:53 SkyScan query 03:42:54 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.37<-16558 Statuses=0009 0009 03:42:54 Msec=0 True Az=63.9 Ze=-68.37 Az status=0009 Ze status=0009 03:42:54 Check angles 03:42:54 SkyScan query 03:42:54 SkyScan query done: ret=0 az=81.87<-5458 ze=-89.775<-17985 Statuses=0009 0009 03:42:54 Msec=750 True Az=81.87 Ze=-89.775 Az status=0009 Ze status=0009 03:42:55 Check angles 03:42:55 SkyScan query 03:42:55 SkyScan query done: ret=0 az=99.795<-6653 ze=-111.135<-19409 Statuses=0009 0009 03:42:55 Msec=1500 True Az=99.795 Ze=-111.135 Az status=0009 Ze status=0009 03:42:55 Check angles 03:42:55 SkyScan query 03:42:56 SkyScan query done: ret=0 az=117.21<-7814 ze=-132.09<-20806 Statuses=0009 0009 03:42:56 Msec=2250 True Az=117.21 Ze=-132.09 Az status=0009 Ze status=0009 03:42:56 Check angles 03:42:56 SkyScan query 03:42:57 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 03:42:57 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 03:42:57 Check angles 03:42:57 SkyScan query 03:42:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:42:57 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:42:57 Message to Master queued w/err=0: serial=129738 error=0 03:43:02 Received message from Master: op=Filter serial=129739 03:43:02 Color wheel filter change from 0 to 0 03:43:02 FLIGetFilterPos err=0 currentPosition=0 03:43:02 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:02 Filter is already there-color wheel unchanged 03:43:03 Received message from Master: op=Shutter serial=129740 03:43:03 Shutter LASER close 03:43:03 Received message from Camera: op=State serial=129742 03:43:03 GetSingleValue result=40 Value=cccccccc 03:43:03 SkyScan query 03:43:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:43:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:03 Parameters OK 03:43:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:03 Set A/D data flow result=40 03:43:03 Set A/D channel type result=40 03:43:03 Set A/D encoding result=40 03:43:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:03 Set channel filter=0.000000e+000 result=40 03:43:03 Config A/D Result=40 03:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:03 Get A/D filter: -9.255963e+061 result=40 03:43:03 Get A/D value=-858993460 result=40 03:43:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:03 Parameters OK 03:43:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:03 Set A/D data flow result=40 03:43:03 Set A/D channel type result=40 03:43:03 Set A/D encoding result=40 03:43:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:03 Set channel filter=0.000000e+000 result=40 03:43:03 Config A/D Result=40 03:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:03 Get A/D filter: -9.255963e+061 result=40 03:43:03 Get A/D value=-858993460 result=40 03:43:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:03 Aux= 03:43:03 Message to Camera, serial 129742 queued 03:43:40 Received message from Master: op=PointingHead serial=129755 03:43:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:43:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:43:40 Point started: ret=0 03:43:40 point_skyscan result=0 03:43:41 Check angles 03:43:41 SkyScan query 03:43:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 03:43:42 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 03:43:42 Check angles 03:43:42 SkyScan query 03:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:43:42 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:43:42 Message to Master queued w/err=0: serial=129755 error=0 03:43:47 Received message from Master: op=Filter serial=129756 03:43:47 Color wheel filter change from 0 to 0 03:43:47 FLIGetFilterPos err=0 currentPosition=0 03:43:47 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:47 Filter is already there-color wheel unchanged 03:43:48 Received message from Master: op=Shutter serial=129757 03:43:48 Shutter LASER open 03:43:48 Received message from Camera: op=State serial=129759 03:43:48 GetSingleValue result=40 Value=cccccccc 03:43:48 SkyScan query 03:43:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:43:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:48 Parameters OK 03:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:48 Set A/D data flow result=40 03:43:48 Set A/D channel type result=40 03:43:48 Set A/D encoding result=40 03:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:48 Set channel filter=0.000000e+000 result=40 03:43:48 Config A/D Result=40 03:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:48 Get A/D filter: -9.255963e+061 result=40 03:43:48 Get A/D value=-858993460 result=40 03:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:48 Parameters OK 03:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:48 Set A/D data flow result=40 03:43:48 Set A/D channel type result=40 03:43:48 Set A/D encoding result=40 03:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:48 Set channel filter=0.000000e+000 result=40 03:43:48 Config A/D Result=40 03:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:48 Get A/D filter: -9.255963e+061 result=40 03:43:48 Get A/D value=-858993460 result=40 03:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:48 Aux= 03:43:48 Message to Camera, serial 129759 queued 03:43:57 Received message from Master: op=Shutter serial=129769 03:43:57 Shutter LASER close 03:43:57 Received message from Master: op=PointingHead serial=129773 03:43:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:43:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:43:58 Point started: ret=0 03:43:58 point_skyscan result=0 03:43:58 Check angles 03:43:58 SkyScan query 03:43:59 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.43<-21562 Statuses=0009 0009 03:43:59 Msec=0 True Az=135.75 Ze=-143.43 Az status=0009 Ze status=0009 03:43:59 Check angles 03:43:59 SkyScan query 03:44:00 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.49<-20166 Statuses=0009 0009 03:44:00 Msec=750 True Az=153.225 Ze=-122.49 Az status=0009 Ze status=0009 03:44:00 Check angles 03:44:00 SkyScan query 03:44:01 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.595<-18773 Statuses=0009 0009 03:44:01 Msec=1500 True Az=170.76 Ze=-101.595 Az status=0009 Ze status=0009 03:44:01 Check angles 03:44:01 SkyScan query 03:44:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.565<-17371 Statuses=0008 0009 03:44:01 Msec=2250 True Az=176.01 Ze=-80.565 Az status=0008 Ze status=0009 03:44:01 Check angles 03:44:01 SkyScan query 03:44:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.22<-15948 Statuses=0008 0009 03:44:02 Msec=3000 True Az=176.01 Ze=-59.22 Az status=0008 Ze status=0009 03:44:02 Check angles 03:44:02 SkyScan query 03:44:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:44:03 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:44:03 Message to Master queued w/err=0: serial=129773 error=0 03:44:08 Received message from Master: op=Filter serial=129774 03:44:08 Color wheel filter change from 0 to 0 03:44:08 FLIGetFilterPos err=0 currentPosition=0 03:44:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:08 Filter is already there-color wheel unchanged 03:44:08 Received message from Master: op=Shutter serial=129775 03:44:08 Shutter LASER close 03:44:08 Received message from Camera: op=State serial=129777 03:44:08 GetSingleValue result=40 Value=cccccccc 03:44:08 SkyScan query 03:44:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:44:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:09 Parameters OK 03:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:09 Set A/D data flow result=40 03:44:09 Set A/D channel type result=40 03:44:09 Set A/D encoding result=40 03:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:09 Set channel filter=0.000000e+000 result=40 03:44:09 Config A/D Result=40 03:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:09 Get A/D filter: -9.255963e+061 result=40 03:44:09 Get A/D value=-858993460 result=40 03:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:09 Parameters OK 03:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:09 Set A/D data flow result=40 03:44:09 Set A/D channel type result=40 03:44:09 Set A/D encoding result=40 03:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:09 Set channel filter=0.000000e+000 result=40 03:44:09 Config A/D Result=40 03:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:09 Get A/D filter: -9.255963e+061 result=40 03:44:09 Get A/D value=-858993460 result=40 03:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:09 Aux= 03:44:09 Message to Camera, serial 129777 queued 03:44:46 Received message from Master: op=PointingHead serial=129790 03:44:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:44:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:44:46 Point started: ret=0 03:44:46 point_skyscan result=0 03:44:47 Check angles 03:44:47 SkyScan query 03:44:47 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.81<-13454 Statuses=0009 0009 03:44:47 Msec=0 True Az=152.97 Ze=-21.81 Az status=0009 Ze status=0009 03:44:47 Check angles 03:44:47 SkyScan query 03:44:48 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.795<-12053 Statuses=0009 0009 03:44:48 Msec=750 True Az=135.66 Ze=-0.795 Az status=0009 Ze status=0009 03:44:48 Check angles 03:44:48 SkyScan query 03:44:49 SkyScan query done: ret=0 az=118.095<-7873 ze=20.115<-10659 Statuses=0009 0009 03:44:49 Msec=1500 True Az=118.095 Ze=20.115 Az status=0009 Ze status=0009 03:44:49 Check angles 03:44:49 SkyScan query 03:44:49 SkyScan query done: ret=0 az=100.245<-6683 ze=41.55<-9230 Statuses=0009 0009 03:44:49 Msec=2250 True Az=100.245 Ze=41.55 Az status=0009 Ze status=0009 03:44:50 Check angles 03:44:50 SkyScan query 03:44:50 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 03:44:50 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 03:44:50 Check angles 03:44:50 SkyScan query 03:44:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:44:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:44:51 Message to Master queued w/err=0: serial=129790 error=0 03:44:56 Received message from Master: op=Filter serial=129791 03:44:56 Color wheel filter change from 0 to 0 03:44:56 FLIGetFilterPos err=0 currentPosition=0 03:44:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:56 Filter is already there-color wheel unchanged 03:44:56 Received message from Master: op=Shutter serial=129792 03:44:56 Shutter LASER close 03:44:56 Received message from Camera: op=State serial=129794 03:44:56 GetSingleValue result=40 Value=cccccccc 03:44:56 SkyScan query 03:44:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:44:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:57 Parameters OK 03:44:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:57 Set A/D data flow result=40 03:44:57 Set A/D channel type result=40 03:44:57 Set A/D encoding result=40 03:44:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:57 Set channel filter=0.000000e+000 result=40 03:44:57 Config A/D Result=40 03:44:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:57 Get A/D filter: -9.255963e+061 result=40 03:44:57 Get A/D value=-858993460 result=40 03:44:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:57 Parameters OK 03:44:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:57 Set A/D data flow result=40 03:44:57 Set A/D channel type result=40 03:44:57 Set A/D encoding result=40 03:44:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:57 Set channel filter=0.000000e+000 result=40 03:44:57 Config A/D Result=40 03:44:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:57 Get A/D filter: -9.255963e+061 result=40 03:44:57 Get A/D value=-858993460 result=40 03:44:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:57 Aux= 03:44:57 Message to Camera, serial 129794 queued 03:45:27 Received message from Master: op=Identify serial=129797 03:45:34 Received message from Master: op=PointingHead serial=129810 03:45:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:45:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:45:34 Point started: ret=0 03:45:34 point_skyscan result=0 03:45:35 Check angles 03:45:35 SkyScan query 03:45:35 SkyScan query done: ret=0 az=85.995<-5733 ze=21.885<-10541 Statuses=0008 0009 03:45:35 Msec=0 True Az=85.995 Ze=21.885 Az status=0008 Ze status=0009 03:45:36 Check angles 03:45:36 SkyScan query 03:45:36 SkyScan query done: ret=0 az=85.995<-5733 ze=0.96<-11936 Statuses=0008 0009 03:45:36 Msec=750 True Az=85.995 Ze=0.96 Az status=0008 Ze status=0009 03:45:36 Check angles 03:45:36 SkyScan query 03:45:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.01<-13334 Statuses=0008 0009 03:45:37 Msec=1500 True Az=85.995 Ze=-20.01 Az status=0008 Ze status=0009 03:45:37 Check angles 03:45:37 SkyScan query 03:45:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.37<-14758 Statuses=0008 0009 03:45:38 Msec=2250 True Az=85.995 Ze=-41.37 Az status=0008 Ze status=0009 03:45:38 Check angles 03:45:38 SkyScan query 03:45:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 03:45:38 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 03:45:38 Message to Master queued w/err=0: serial=129810 error=0 03:45:43 Received message from Master: op=Filter serial=129811 03:45:43 Color wheel filter change from 0 to 0 03:45:43 FLIGetFilterPos err=0 currentPosition=0 03:45:43 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:43 Filter is already there-color wheel unchanged 03:45:44 Received message from Master: op=Shutter serial=129812 03:45:44 Shutter LASER close 03:45:44 Received message from Camera: op=State serial=129814 03:45:44 GetSingleValue result=40 Value=cccccccc 03:45:44 SkyScan query 03:45:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:45:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:44 Parameters OK 03:45:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:44 Set A/D data flow result=40 03:45:44 Set A/D channel type result=40 03:45:44 Set A/D encoding result=40 [UTC 2018-12-14 03:45:44] 03:45:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:44 Set channel filter=0.000000e+000 result=40 03:45:44 Config A/D Result=40 03:45:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:44 Get A/D filter: -9.255963e+061 result=40 03:45:44 Get A/D value=-858993460 result=40 03:45:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:44 Parameters OK 03:45:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:44 Set A/D data flow result=40 03:45:44 Set A/D channel type result=40 03:45:44 Set A/D encoding result=40 03:45:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:44 Set channel filter=0.000000e+000 result=40 03:45:44 Config A/D Result=40 03:45:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:44 Get A/D filter: -9.255963e+061 result=40 03:45:44 Get A/D value=-858993460 result=40 03:45:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:44 Aux= 03:45:44 Message to Camera, serial 129814 queued 03:46:20 Received message from Master: op=PointingHead serial=129826 03:46:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:46:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:46:20 Point started: ret=0 03:46:20 point_skyscan result=0 03:46:21 Check angles 03:46:21 SkyScan query 03:46:22 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.615<-17441 Statuses=0009 0009 03:46:22 Msec=0 True Az=109.185 Ze=-81.615 Az status=0009 Ze status=0009 03:46:22 Check angles 03:46:22 SkyScan query 03:46:23 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.555<-18837 Statuses=0008 0009 03:46:23 Msec=750 True Az=112.98 Ze=-102.555 Az status=0008 Ze status=0009 03:46:23 Check angles 03:46:23 SkyScan query 03:46:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.51<-20234 Statuses=0008 0009 03:46:23 Msec=1500 True Az=112.995 Ze=-123.51 Az status=0008 Ze status=0009 03:46:23 Check angles 03:46:23 SkyScan query 03:46:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.45<-21630 Statuses=0008 0009 03:46:24 Msec=2250 True Az=112.995 Ze=-144.45 Az status=0008 Ze status=0009 03:46:24 Check angles 03:46:24 SkyScan query 03:46:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.42<-23028 Statuses=0008 0009 03:46:25 Msec=3000 True Az=112.995 Ze=-165.42 Az status=0008 Ze status=0009 03:46:25 Check angles 03:46:25 SkyScan query 03:46:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:46:26 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:46:26 Message to Master queued w/err=0: serial=129826 error=0 03:46:31 Received message from Master: op=Filter serial=129827 03:46:31 Color wheel filter change from 0 to 0 03:46:31 FLIGetFilterPos err=0 currentPosition=0 03:46:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:31 Filter is already there-color wheel unchanged 03:46:31 Received message from Master: op=Shutter serial=129828 03:46:31 Shutter LASER open 03:46:31 Received message from Camera: op=State serial=129830 03:46:31 GetSingleValue result=40 Value=cccccccc 03:46:31 SkyScan query 03:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:46:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:31 Parameters OK 03:46:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:31 Set A/D data flow result=40 03:46:31 Set A/D channel type result=40 03:46:31 Set A/D encoding result=40 03:46:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:31 Set channel filter=0.000000e+000 result=40 03:46:31 Config A/D Result=40 03:46:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:31 Get A/D filter: -9.255963e+061 result=40 03:46:31 Get A/D value=-858993460 result=40 03:46:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:31 Parameters OK 03:46:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:31 Set A/D data flow result=40 03:46:31 Set A/D channel type result=40 03:46:31 Set A/D encoding result=40 03:46:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:31 Set channel filter=0.000000e+000 result=40 03:46:31 Config A/D Result=40 03:46:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:31 Get A/D filter: -9.255963e+061 result=40 03:46:31 Get A/D value=-858993460 result=40 03:46:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:31 Aux= 03:46:31 Message to Camera, serial 129830 queued 03:46:40 Received message from Master: op=Shutter serial=129840 03:46:40 Shutter LASER close 03:46:40 Received message from Master: op=PointingHead serial=129844 03:46:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:46:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:46:41 Point started: ret=0 03:46:41 point_skyscan result=0 03:46:41 Check angles 03:46:41 SkyScan query 03:46:42 SkyScan query done: ret=0 az=89.79<-5986 ze=157.005<-1533 Statuses=0009 0009 03:46:42 Msec=0 True Az=89.79 Ze=157.005 Az status=0009 Ze status=0009 03:46:42 Check angles 03:46:42 SkyScan query 03:46:43 SkyScan query done: ret=0 az=72.27<-4818 ze=136.065<-2929 Statuses=0009 0009 03:46:43 Msec=750 True Az=72.27 Ze=136.065 Az status=0009 Ze status=0009 03:46:43 Check angles 03:46:43 SkyScan query 03:46:44 SkyScan query done: ret=0 az=54.6<-3640 ze=114.645<-4357 Statuses=0009 0009 03:46:44 Msec=1500 True Az=54.6 Ze=114.645 Az status=0009 Ze status=0009 03:46:44 Check angles 03:46:44 SkyScan query 03:46:44 SkyScan query done: ret=0 az=40.965<-2731 ze=93.705<-5753 Statuses=0009 0009 03:46:44 Msec=2250 True Az=40.965 Ze=93.705 Az status=0009 Ze status=0009 03:46:44 Check angles 03:46:44 SkyScan query 03:46:45 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 03:46:45 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 03:46:45 Check angles 03:46:45 SkyScan query 03:46:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 03:46:46 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 03:46:46 Check angles 03:46:46 SkyScan query 03:46:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:46:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:46:47 Message to Master queued w/err=0: serial=129844 error=0 03:46:52 Received message from Master: op=Filter serial=129845 03:46:52 Color wheel filter change from 0 to 0 03:46:52 FLIGetFilterPos err=0 currentPosition=0 03:46:52 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:52 Filter is already there-color wheel unchanged 03:46:52 Received message from Master: op=Shutter serial=129846 03:46:52 Shutter LASER close 03:46:52 Received message from Camera: op=State serial=129848 03:46:52 GetSingleValue result=40 Value=cccccccc 03:46:52 SkyScan query 03:46:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:46:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:52 Parameters OK 03:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:52 Set A/D data flow result=40 03:46:52 Set A/D channel type result=40 03:46:52 Set A/D encoding result=40 03:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:52 Set channel filter=0.000000e+000 result=40 03:46:52 Config A/D Result=40 03:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:52 Get A/D filter: -9.255963e+061 result=40 03:46:52 Get A/D value=-858993460 result=40 03:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:52 Parameters OK 03:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:52 Set A/D data flow result=40 03:46:52 Set A/D channel type result=40 03:46:52 Set A/D encoding result=40 03:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:52 Set channel filter=0.000000e+000 result=40 03:46:52 Config A/D Result=40 03:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:52 Get A/D filter: -9.255963e+061 result=40 03:46:52 Get A/D value=-858993460 result=40 03:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:52 Aux= 03:46:52 Message to Camera, serial 129848 queued 03:47:29 Received message from Master: op=PointingHead serial=129861 03:47:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:47:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:47:30 Point started: ret=0 03:47:30 point_skyscan result=0 03:47:31 Check angles 03:47:31 SkyScan query 03:47:31 SkyScan query done: ret=0 az=40.995<-2733 ze=21.63<-10558 Statuses=0008 0009 03:47:31 Msec=0 True Az=40.995 Ze=21.63 Az status=0008 Ze status=0009 03:47:31 Check angles 03:47:31 SkyScan query 03:47:32 SkyScan query done: ret=0 az=41.01<-2734 ze=0.225<-11985 Statuses=0008 0009 03:47:32 Msec=750 True Az=41.01 Ze=0.225 Az status=0008 Ze status=0009 03:47:32 Check angles 03:47:32 SkyScan query 03:47:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.15<-13410 Statuses=0008 0009 03:47:33 Msec=1500 True Az=40.995 Ze=-21.15 Az status=0008 Ze status=0009 03:47:33 Check angles 03:47:33 SkyScan query 03:47:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:47:33 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:47:34 Check angles 03:47:34 SkyScan query 03:47:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 03:47:34 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 03:47:34 Message to Master queued w/err=0: serial=129861 error=0 03:47:39 Received message from Master: op=Filter serial=129862 03:47:39 Color wheel filter change from 0 to 0 03:47:39 FLIGetFilterPos err=0 currentPosition=0 03:47:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:39 Filter is already there-color wheel unchanged 03:47:39 Received message from Master: op=Shutter serial=129863 03:47:39 Shutter LASER close 03:47:39 Received message from Camera: op=State serial=129865 03:47:39 GetSingleValue result=40 Value=cccccccc 03:47:39 SkyScan query 03:47:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:47:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:40 Parameters OK 03:47:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:40 Set A/D data flow result=40 03:47:40 Set A/D channel type result=40 03:47:40 Set A/D encoding result=40 03:47:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:40 Set channel filter=0.000000e+000 result=40 03:47:40 Config A/D Result=40 03:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:40 Get A/D filter: -9.255963e+061 result=40 03:47:40 Get A/D value=-858993460 result=40 03:47:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:40 Parameters OK 03:47:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:40 Set A/D data flow result=40 03:47:40 Set A/D channel type result=40 03:47:40 Set A/D encoding result=40 03:47:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:40 Set channel filter=0.000000e+000 result=40 03:47:40 Config A/D Result=40 03:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:40 Get A/D filter: -9.255963e+061 result=40 03:47:40 Get A/D value=-858993460 result=40 03:47:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:40 Aux= 03:47:40 Message to Camera, serial 129865 queued 03:48:17 Received message from Master: op=PointingHead serial=129878 03:48:17 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:48:17 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:48:17 Point started: ret=0 03:48:17 point_skyscan result=0 03:48:18 Check angles 03:48:18 SkyScan query 03:48:18 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.37<-16558 Statuses=0009 0009 03:48:18 Msec=0 True Az=64.095 Ze=-68.37 Az status=0009 Ze status=0009 03:48:19 Check angles 03:48:19 SkyScan query 03:48:19 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.355<-17957 Statuses=0009 0009 03:48:19 Msec=750 True Az=81.375 Ze=-89.355 Az status=0009 Ze status=0009 03:48:19 Check angles 03:48:19 SkyScan query 03:48:20 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.73<-19382 Statuses=0009 0009 03:48:20 Msec=1500 True Az=99.405 Ze=-110.73 Az status=0009 Ze status=0009 03:48:20 Check angles 03:48:20 SkyScan query 03:48:21 SkyScan query done: ret=0 az=116.94<-7796 ze=-131.64<-20776 Statuses=0009 0009 03:48:21 Msec=2250 True Az=116.94 Ze=-131.64 Az status=0009 Ze status=0009 03:48:21 Check angles 03:48:21 SkyScan query 03:48:22 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 03:48:22 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 03:48:22 Check angles 03:48:22 SkyScan query 03:48:22 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:48:22 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:48:22 Message to Master queued w/err=0: serial=129878 error=0 03:48:27 Received message from Master: op=Filter serial=129879 03:48:27 Color wheel filter change from 0 to 0 03:48:27 FLIGetFilterPos err=0 currentPosition=0 03:48:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:27 Filter is already there-color wheel unchanged 03:48:27 Received message from Master: op=Shutter serial=129880 03:48:27 Shutter LASER close 03:48:27 Received message from Camera: op=State serial=129882 03:48:27 GetSingleValue result=40 Value=cccccccc 03:48:27 SkyScan query 03:48:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:48:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:28 Parameters OK 03:48:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:28 Set A/D data flow result=40 03:48:28 Set A/D channel type result=40 03:48:28 Set A/D encoding result=40 03:48:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:28 Set channel filter=0.000000e+000 result=40 03:48:28 Config A/D Result=40 03:48:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:28 Get A/D filter: -9.255963e+061 result=40 03:48:28 Get A/D value=-858993460 result=40 03:48:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:28 Parameters OK 03:48:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:28 Set A/D data flow result=40 03:48:28 Set A/D channel type result=40 03:48:28 Set A/D encoding result=40 03:48:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:28 Set channel filter=0.000000e+000 result=40 03:48:28 Config A/D Result=40 03:48:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:28 Get A/D filter: -9.255963e+061 result=40 03:48:28 Get A/D value=-858993460 result=40 03:48:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:28 Aux= 03:48:28 Message to Camera, serial 129882 queued 03:49:05 Received message from Master: op=PointingHead serial=129895 03:49:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:49:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:49:05 Point started: ret=0 03:49:05 point_skyscan result=0 03:49:06 Check angles 03:49:06 SkyScan query 03:49:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 03:49:07 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 03:49:07 Check angles 03:49:07 SkyScan query 03:49:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:49:07 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:49:07 Message to Master queued w/err=0: serial=129895 error=0 03:49:12 Received message from Master: op=Filter serial=129896 03:49:12 Color wheel filter change from 0 to 0 03:49:12 FLIGetFilterPos err=0 currentPosition=0 03:49:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:49:12 Filter is already there-color wheel unchanged 03:49:12 Received message from Master: op=Shutter serial=129897 03:49:12 Shutter LASER open 03:49:13 Received message from Camera: op=State serial=129899 03:49:13 GetSingleValue result=40 Value=cccccccc 03:49:13 SkyScan query 03:49:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:49:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:13 Parameters OK 03:49:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:13 Set A/D data flow result=40 03:49:13 Set A/D channel type result=40 03:49:13 Set A/D encoding result=40 03:49:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:13 Set channel filter=0.000000e+000 result=40 03:49:13 Config A/D Result=40 03:49:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:13 Get A/D filter: -9.255963e+061 result=40 03:49:13 Get A/D value=-858993460 result=40 03:49:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:13 Parameters OK 03:49:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:13 Set A/D data flow result=40 03:49:13 Set A/D channel type result=40 03:49:13 Set A/D encoding result=40 03:49:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:13 Set channel filter=0.000000e+000 result=40 03:49:13 Config A/D Result=40 03:49:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:13 Get A/D filter: -9.255963e+061 result=40 03:49:13 Get A/D value=-858993460 result=40 03:49:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:49:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:49:13 Aux= 03:49:13 Message to Camera, serial 129899 queued 03:49:21 Received message from Master: op=Shutter serial=129908 03:49:21 Shutter LASER close 03:49:21 Received message from Master: op=PointingHead serial=129912 03:49:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:49:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:49:22 Point started: ret=0 03:49:22 point_skyscan result=0 03:49:22 Check angles 03:49:22 SkyScan query 03:49:23 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.025<-21535 Statuses=0009 0009 03:49:23 Msec=0 True Az=136.17 Ze=-143.025 Az status=0009 Ze status=0009 03:49:23 Check angles 03:49:23 SkyScan query 03:49:24 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.07<-20138 Statuses=0009 0009 03:49:24 Msec=750 True Az=153.63 Ze=-122.07 Az status=0009 Ze status=0009 03:49:24 Check angles 03:49:24 SkyScan query 03:49:25 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.16<-18744 Statuses=0009 0009 03:49:25 Msec=1500 True Az=171.21 Ze=-101.16 Az status=0009 Ze status=0009 03:49:25 Check angles 03:49:25 SkyScan query 03:49:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.205<-17347 Statuses=0008 0009 03:49:25 Msec=2250 True Az=176.01 Ze=-80.205 Az status=0008 Ze status=0009 03:49:25 Check angles 03:49:25 SkyScan query 03:49:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.22<-15948 Statuses=0008 0009 03:49:26 Msec=3000 True Az=176.01 Ze=-59.22 Az status=0008 Ze status=0009 03:49:26 Check angles 03:49:26 SkyScan query 03:49:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:49:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:49:27 Message to Master queued w/err=0: serial=129912 error=0 03:49:32 Received message from Master: op=Filter serial=129913 03:49:32 Color wheel filter change from 0 to 0 03:49:32 FLIGetFilterPos err=0 currentPosition=0 03:49:32 FLIGetStepsRemaining err=0 RemainingSteps=0 03:49:32 Filter is already there-color wheel unchanged 03:49:32 Received message from Master: op=Shutter serial=129914 03:49:32 Shutter LASER close 03:49:32 Received message from Camera: op=State serial=129916 03:49:32 GetSingleValue result=40 Value=cccccccc 03:49:32 SkyScan query 03:49:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:49:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:33 Parameters OK 03:49:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:33 Set A/D data flow result=40 03:49:33 Set A/D channel type result=40 03:49:33 Set A/D encoding result=40 03:49:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:33 Set channel filter=0.000000e+000 result=40 03:49:33 Config A/D Result=40 03:49:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:33 Get A/D filter: -9.255963e+061 result=40 03:49:33 Get A/D value=-858993460 result=40 03:49:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:33 Parameters OK 03:49:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:33 Set A/D data flow result=40 03:49:33 Set A/D channel type result=40 03:49:33 Set A/D encoding result=40 03:49:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:33 Set channel filter=0.000000e+000 result=40 03:49:33 Config A/D Result=40 03:49:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:33 Get A/D filter: -9.255963e+061 result=40 03:49:33 Get A/D value=-858993460 result=40 03:49:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:49:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:49:33 Aux= 03:49:33 Message to Camera, serial 129916 queued 03:50:10 Received message from Master: op=PointingHead serial=129929 03:50:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:50:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:50:10 Point started: ret=0 03:50:10 point_skyscan result=0 03:50:11 Check angles 03:50:11 SkyScan query 03:50:11 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.825<-13455 Statuses=0009 0009 03:50:11 Msec=0 True Az=152.955 Ze=-21.825 Az status=0009 Ze status=0009 03:50:11 Check angles 03:50:11 SkyScan query 03:50:12 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.81<-12054 Statuses=0009 0009 03:50:12 Msec=750 True Az=135.405 Ze=-0.81 Az status=0009 Ze status=0009 03:50:12 Check angles 03:50:12 SkyScan query 03:50:13 SkyScan query done: ret=0 az=117.96<-7864 ze=20.115<-10659 Statuses=0009 0009 03:50:13 Msec=1500 True Az=117.96 Ze=20.115 Az status=0009 Ze status=0009 03:50:13 Check angles 03:50:13 SkyScan query 03:50:14 SkyScan query done: ret=0 az=100.59<-6706 ze=41.145<-9257 Statuses=0009 0009 03:50:14 Msec=2250 True Az=100.59 Ze=41.145 Az status=0009 Ze status=0009 03:50:14 Check angles 03:50:14 SkyScan query 03:50:14 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 03:50:14 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 03:50:14 Check angles 03:50:14 SkyScan query 03:50:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:50:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:50:15 Message to Master queued w/err=0: serial=129929 error=0 03:50:20 Received message from Master: op=Filter serial=129930 03:50:20 Color wheel filter change from 0 to 0 03:50:20 FLIGetFilterPos err=0 currentPosition=0 03:50:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:20 Filter is already there-color wheel unchanged 03:50:20 Received message from Master: op=Shutter serial=129931 03:50:20 Shutter LASER close 03:50:20 Received message from Camera: op=State serial=129933 03:50:20 GetSingleValue result=40 Value=cccccccc 03:50:20 SkyScan query 03:50:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:50:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:21 Parameters OK 03:50:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:21 Set A/D data flow result=40 03:50:21 Set A/D channel type result=40 03:50:21 Set A/D encoding result=40 03:50:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:21 Set channel filter=0.000000e+000 result=40 03:50:21 Config A/D Result=40 03:50:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:21 Get A/D filter: -9.255963e+061 result=40 03:50:21 Get A/D value=-858993460 result=40 03:50:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:21 Parameters OK 03:50:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:21 Set A/D data flow result=40 03:50:21 Set A/D channel type result=40 03:50:21 Set A/D encoding result=40 03:50:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:21 Set channel filter=0.000000e+000 result=40 03:50:21 Config A/D Result=40 03:50:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:21 Get A/D filter: -9.255963e+061 result=40 03:50:21 Get A/D value=-858993460 result=40 03:50:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:21 Aux= 03:50:21 Message to Camera, serial 129933 queued 03:50:58 Received message from Master: op=PointingHead serial=129946 03:50:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:50:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:50:58 Point started: ret=0 03:50:58 point_skyscan result=0 03:50:59 Check angles 03:50:59 SkyScan query 03:50:59 SkyScan query done: ret=0 az=85.995<-5733 ze=21.18<-10588 Statuses=0008 0009 03:50:59 Msec=0 True Az=85.995 Ze=21.18 Az status=0008 Ze status=0009 03:51:00 Check angles 03:51:00 SkyScan query 03:51:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-0.255<-12017 Statuses=0008 0009 03:51:00 Msec=750 True Az=85.995 Ze=-0.255 Az status=0008 Ze status=0009 03:51:00 Check angles 03:51:00 SkyScan query 03:51:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.21<-13414 Statuses=0008 0009 03:51:01 Msec=1500 True Az=85.995 Ze=-21.21 Az status=0008 Ze status=0009 03:51:01 Check angles 03:51:01 SkyScan query 03:51:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.165<-14811 Statuses=0008 0009 03:51:02 Msec=2250 True Az=85.995 Ze=-42.165 Az status=0008 Ze status=0009 03:51:02 Check angles 03:51:02 SkyScan query 03:51:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 03:51:02 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 03:51:02 Message to Master queued w/err=0: serial=129946 error=0 03:51:07 Received message from Master: op=Filter serial=129947 03:51:07 Color wheel filter change from 0 to 0 03:51:07 FLIGetFilterPos err=0 currentPosition=0 03:51:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:07 Filter is already there-color wheel unchanged 03:51:08 Received message from Master: op=Shutter serial=129948 03:51:08 Shutter LASER close 03:51:08 Received message from Camera: op=State serial=129950 03:51:08 GetSingleValue result=40 Value=cccccccc 03:51:08 SkyScan query 03:51:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:51:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:08 Parameters OK 03:51:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:08 Set A/D data flow result=40 03:51:08 Set A/D channel type result=40 03:51:08 Set A/D encoding result=40 03:51:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:08 Set channel filter=0.000000e+000 result=40 03:51:08 Config A/D Result=40 03:51:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:08 Get A/D filter: -9.255963e+061 result=40 03:51:08 Get A/D value=-858993460 result=40 03:51:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:08 Parameters OK 03:51:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:08 Set A/D data flow result=40 03:51:08 Set A/D channel type result=40 03:51:08 Set A/D encoding result=40 03:51:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:08 Set channel filter=0.000000e+000 result=40 03:51:08 Config A/D Result=40 03:51:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:08 Get A/D filter: -9.255963e+061 result=40 03:51:08 Get A/D value=-858993460 result=40 03:51:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:08 Aux= 03:51:08 Message to Camera, serial 129950 queued 03:51:45 Received message from Master: op=PointingHead serial=129963 03:51:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:51:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:51:45 Point started: ret=0 03:51:45 point_skyscan result=0 03:51:46 Check angles 03:51:46 SkyScan query 03:51:47 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.585<-17439 Statuses=0009 0009 03:51:47 Msec=0 True Az=109.35 Ze=-81.585 Az status=0009 Ze status=0009 03:51:47 Check angles 03:51:47 SkyScan query 03:51:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 03:51:48 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 03:51:48 Check angles 03:51:48 SkyScan query 03:51:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 03:51:48 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 03:51:48 Check angles 03:51:48 SkyScan query 03:51:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.435<-21629 Statuses=0008 0009 03:51:49 Msec=2250 True Az=112.995 Ze=-144.435 Az status=0008 Ze status=0009 03:51:49 Check angles 03:51:49 SkyScan query 03:51:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.375<-23025 Statuses=0008 0009 03:51:50 Msec=3000 True Az=112.995 Ze=-165.375 Az status=0008 Ze status=0009 03:51:50 Check angles 03:51:50 SkyScan query 03:51:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:51:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:51:51 Message to Master queued w/err=0: serial=129963 error=0 03:51:56 Received message from Master: op=Filter serial=129964 03:51:56 Color wheel filter change from 0 to 0 03:51:56 FLIGetFilterPos err=0 currentPosition=0 03:51:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:56 Filter is already there-color wheel unchanged 03:51:56 Received message from Master: op=Shutter serial=129965 03:51:56 Shutter LASER open 03:51:56 Received message from Camera: op=State serial=129967 03:51:56 GetSingleValue result=40 Value=cccccccc 03:51:56 SkyScan query 03:51:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:51:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:56 Parameters OK 03:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:56 Set A/D data flow result=40 03:51:56 Set A/D channel type result=40 03:51:56 Set A/D encoding result=40 03:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:56 Set channel filter=0.000000e+000 result=40 03:51:56 Config A/D Result=40 03:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:56 Get A/D filter: -9.255963e+061 result=40 03:51:56 Get A/D value=-858993460 result=40 03:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:56 Parameters OK 03:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:56 Set A/D data flow result=40 03:51:56 Set A/D channel type result=40 03:51:56 Set A/D encoding result=40 03:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:56 Set channel filter=0.000000e+000 result=40 03:51:56 Config A/D Result=40 03:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:56 Get A/D filter: -9.255963e+061 result=40 03:51:56 Get A/D value=-858993460 result=40 03:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:56 Aux= 03:51:56 Message to Camera, serial 129967 queued 03:52:05 Received message from Master: op=Shutter serial=129977 03:52:05 Shutter LASER close 03:52:05 Received message from Master: op=PointingHead serial=129981 03:52:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:52:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:52:06 Point started: ret=0 03:52:06 point_skyscan result=0 03:52:06 Check angles 03:52:06 SkyScan query 03:52:07 SkyScan query done: ret=0 az=89.64<-5976 ze=156.945<-1537 Statuses=0009 0009 03:52:07 Msec=0 True Az=89.64 Ze=156.945 Az status=0009 Ze status=0009 03:52:07 Check angles 03:52:07 SkyScan query 03:52:08 SkyScan query done: ret=0 az=72.225<-4815 ze=135.975<-2935 Statuses=0009 0009 03:52:08 Msec=750 True Az=72.225 Ze=135.975 Az status=0009 Ze status=0009 03:52:08 Check angles 03:52:08 SkyScan query 03:52:09 SkyScan query done: ret=0 az=54.51<-3634 ze=114.57<-4362 Statuses=0009 0009 03:52:09 Msec=1500 True Az=54.51 Ze=114.57 Az status=0009 Ze status=0009 03:52:09 Check angles 03:52:09 SkyScan query 03:52:09 SkyScan query done: ret=0 az=40.965<-2731 ze=93.645<-5757 Statuses=0009 0009 03:52:09 Msec=2250 True Az=40.965 Ze=93.645 Az status=0009 Ze status=0009 03:52:09 Check angles 03:52:09 SkyScan query 03:52:10 SkyScan query done: ret=0 az=40.995<-2733 ze=72.675<-7155 Statuses=0008 0009 03:52:10 Msec=3000 True Az=40.995 Ze=72.675 Az status=0008 Ze status=0009 03:52:10 Check angles 03:52:10 SkyScan query 03:52:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.17<-8522 Statuses=0008 0009 03:52:11 Msec=3750 True Az=40.995 Ze=52.17 Az status=0008 Ze status=0009 03:52:11 Check angles 03:52:11 SkyScan query 03:52:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:52:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:52:12 Message to Master queued w/err=0: serial=129981 error=0 03:52:17 Received message from Master: op=Filter serial=129982 03:52:17 Color wheel filter change from 0 to 0 03:52:17 FLIGetFilterPos err=0 currentPosition=0 03:52:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:17 Filter is already there-color wheel unchanged 03:52:17 Received message from Master: op=Shutter serial=129983 03:52:17 Shutter LASER close 03:52:17 Received message from Camera: op=State serial=129985 03:52:17 GetSingleValue result=40 Value=cccccccc 03:52:17 SkyScan query 03:52:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:52:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:18 Parameters OK 03:52:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:18 Set A/D data flow result=40 03:52:18 Set A/D channel type result=40 03:52:18 Set A/D encoding result=40 03:52:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:18 Set channel filter=0.000000e+000 result=40 03:52:18 Config A/D Result=40 03:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:18 Get A/D filter: -9.255963e+061 result=40 03:52:18 Get A/D value=-858993460 result=40 03:52:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:18 Parameters OK 03:52:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:18 Set A/D data flow result=40 03:52:18 Set A/D channel type result=40 03:52:18 Set A/D encoding result=40 03:52:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:18 Set channel filter=0.000000e+000 result=40 03:52:18 Config A/D Result=40 03:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:18 Get A/D filter: -9.255963e+061 result=40 03:52:18 Get A/D value=-858993460 result=40 03:52:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:18 Aux= 03:52:18 Message to Camera, serial 129985 queued 03:52:54 Received message from Master: op=PointingHead serial=129998 03:52:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:52:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:52:55 Point started: ret=0 03:52:55 point_skyscan result=0 03:52:56 Check angles 03:52:56 SkyScan query 03:52:56 SkyScan query done: ret=0 az=40.995<-2733 ze=21.735<-10551 Statuses=0008 0009 03:52:56 Msec=0 True Az=40.995 Ze=21.735 Az status=0008 Ze status=0009 03:52:56 Check angles 03:52:56 SkyScan query 03:52:57 SkyScan query done: ret=0 az=40.995<-2733 ze=0.75<-11950 Statuses=0008 0009 03:52:57 Msec=750 True Az=40.995 Ze=0.75 Az status=0008 Ze status=0009 03:52:57 Check angles 03:52:57 SkyScan query 03:52:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.205<-13347 Statuses=0008 0009 03:52:58 Msec=1500 True Az=40.995 Ze=-20.205 Az status=0008 Ze status=0009 03:52:58 Check angles 03:52:58 SkyScan query 03:52:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 03:52:58 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 03:52:59 Check angles 03:52:59 SkyScan query 03:52:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 03:52:59 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 03:52:59 Message to Master queued w/err=0: serial=129998 error=0 03:53:04 Received message from Master: op=Filter serial=129999 03:53:04 Color wheel filter change from 0 to 0 03:53:04 FLIGetFilterPos err=0 currentPosition=0 03:53:04 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:04 Filter is already there-color wheel unchanged 03:53:04 Received message from Master: op=Shutter serial=130000 03:53:04 Shutter LASER close 03:53:04 Received message from Camera: op=State serial=130002 03:53:04 GetSingleValue result=40 Value=cccccccc 03:53:04 SkyScan query 03:53:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:53:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:05 Parameters OK 03:53:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:05 Set A/D data flow result=40 03:53:05 Set A/D channel type result=40 03:53:05 Set A/D encoding result=40 03:53:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:05 Set channel filter=0.000000e+000 result=40 03:53:05 Config A/D Result=40 03:53:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:05 Get A/D filter: -9.255963e+061 result=40 03:53:05 Get A/D value=-858993460 result=40 03:53:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:05 Parameters OK 03:53:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:05 Set A/D data flow result=40 03:53:05 Set A/D channel type result=40 03:53:05 Set A/D encoding result=40 03:53:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:05 Set channel filter=0.000000e+000 result=40 03:53:05 Config A/D Result=40 03:53:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:05 Get A/D filter: -9.255963e+061 result=40 03:53:05 Get A/D value=-858993460 result=40 03:53:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:05 Aux= 03:53:05 Message to Camera, serial 130002 queued 03:53:42 Received message from Master: op=PointingHead serial=130015 03:53:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:53:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:53:42 Point started: ret=0 03:53:42 point_skyscan result=0 03:53:43 Check angles 03:53:43 SkyScan query 03:53:43 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.145<-16543 Statuses=0009 0009 03:53:43 Msec=0 True Az=63.87 Ze=-68.145 Az status=0009 Ze status=0009 03:53:44 Check angles 03:53:44 SkyScan query 03:53:44 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.13<-17942 Statuses=0009 0009 03:53:44 Msec=750 True Az=81.36 Ze=-89.13 Az status=0009 Ze status=0009 03:53:44 Check angles 03:53:44 SkyScan query 03:53:45 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.52<-19368 Statuses=0009 0009 03:53:45 Msec=1500 True Az=99.12 Ze=-110.52 Az status=0009 Ze status=0009 03:53:45 Check angles 03:53:45 SkyScan query 03:53:46 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.865<-20791 Statuses=0009 0009 03:53:46 Msec=2250 True Az=117.105 Ze=-131.865 Az status=0009 Ze status=0009 03:53:46 Check angles 03:53:46 SkyScan query 03:53:46 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 03:53:46 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 03:53:47 Check angles 03:53:47 SkyScan query 03:53:47 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:53:47 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:53:47 Message to Master queued w/err=0: serial=130015 error=0 03:53:52 Received message from Master: op=Filter serial=130016 03:53:52 Color wheel filter change from 0 to 0 03:53:52 FLIGetFilterPos err=0 currentPosition=0 03:53:52 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:52 Filter is already there-color wheel unchanged 03:53:52 Received message from Master: op=Shutter serial=130017 03:53:52 Shutter LASER close 03:53:52 Received message from Camera: op=State serial=130019 03:53:52 GetSingleValue result=40 Value=cccccccc 03:53:52 SkyScan query 03:53:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:53:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:53 Parameters OK 03:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:53 Set A/D data flow result=40 03:53:53 Set A/D channel type result=40 03:53:53 Set A/D encoding result=40 03:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:53 Set channel filter=0.000000e+000 result=40 03:53:53 Config A/D Result=40 03:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:53 Get A/D filter: -9.255963e+061 result=40 03:53:53 Get A/D value=-858993460 result=40 03:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:53 Parameters OK 03:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:53 Set A/D data flow result=40 03:53:53 Set A/D channel type result=40 03:53:53 Set A/D encoding result=40 03:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:53 Set channel filter=0.000000e+000 result=40 03:53:53 Config A/D Result=40 03:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:53 Get A/D filter: -9.255963e+061 result=40 03:53:53 Get A/D value=-858993460 result=40 03:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:53 Aux= 03:53:53 Message to Camera, serial 130019 queued 03:54:30 Received message from Master: op=PointingHead serial=130032 03:54:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:54:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:54:30 Point started: ret=0 03:54:30 point_skyscan result=0 03:54:31 Check angles 03:54:31 SkyScan query 03:54:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 03:54:32 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 03:54:32 Check angles 03:54:32 SkyScan query 03:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:54:32 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:54:32 Message to Master queued w/err=0: serial=130032 error=0 03:54:37 Received message from Master: op=Filter serial=130033 03:54:37 Color wheel filter change from 0 to 0 03:54:37 FLIGetFilterPos err=0 currentPosition=0 03:54:37 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:37 Filter is already there-color wheel unchanged 03:54:37 Received message from Master: op=Shutter serial=130034 03:54:37 Shutter LASER open 03:54:38 Received message from Camera: op=State serial=130036 03:54:38 GetSingleValue result=40 Value=cccccccc 03:54:38 SkyScan query 03:54:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:54:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:38 Parameters OK 03:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:38 Set A/D data flow result=40 03:54:38 Set A/D channel type result=40 03:54:38 Set A/D encoding result=40 03:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:38 Set channel filter=0.000000e+000 result=40 03:54:38 Config A/D Result=40 03:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:38 Get A/D filter: -9.255963e+061 result=40 03:54:38 Get A/D value=-858993460 result=40 03:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:38 Parameters OK 03:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:38 Set A/D data flow result=40 03:54:38 Set A/D channel type result=40 03:54:38 Set A/D encoding result=40 03:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:38 Set channel filter=0.000000e+000 result=40 03:54:38 Config A/D Result=40 03:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:38 Get A/D filter: -9.255963e+061 result=40 03:54:38 Get A/D value=-858993460 result=40 03:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:38 Aux= 03:54:38 Message to Camera, serial 130036 queued 03:54:46 Received message from Master: op=Shutter serial=130045 03:54:46 Shutter LASER close 03:54:46 Received message from Master: op=PointingHead serial=130049 03:54:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:54:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:54:47 Point started: ret=0 03:54:47 point_skyscan result=0 03:54:47 Check angles 03:54:47 SkyScan query 03:54:48 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.49<-21566 Statuses=0009 0009 03:54:48 Msec=0 True Az=135.75 Ze=-143.49 Az status=0009 Ze status=0009 03:54:48 Check angles 03:54:48 SkyScan query 03:54:49 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.055<-20137 Statuses=0009 0009 03:54:49 Msec=750 True Az=153.6 Ze=-122.055 Az status=0009 Ze status=0009 03:54:49 Check angles 03:54:49 SkyScan query 03:54:50 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.635<-18709 Statuses=0009 0009 03:54:50 Msec=1500 True Az=171.465 Ze=-100.635 Az status=0009 Ze status=0009 03:54:50 Check angles 03:54:50 SkyScan query 03:54:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.755<-17317 Statuses=0008 0009 03:54:50 Msec=2250 True Az=176.01 Ze=-79.755 Az status=0008 Ze status=0009 03:54:50 Check angles 03:54:50 SkyScan query 03:54:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.785<-15919 Statuses=0008 0009 03:54:51 Msec=3000 True Az=176.01 Ze=-58.785 Az status=0008 Ze status=0009 03:54:51 Check angles 03:54:51 SkyScan query 03:54:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:54:52 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:54:52 Message to Master queued w/err=0: serial=130049 error=0 03:54:57 Received message from Master: op=Filter serial=130050 03:54:57 Color wheel filter change from 0 to 0 03:54:57 FLIGetFilterPos err=0 currentPosition=0 03:54:57 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:57 Filter is already there-color wheel unchanged 03:54:57 Received message from Master: op=Shutter serial=130051 03:54:57 Shutter LASER close 03:54:57 Received message from Camera: op=State serial=130053 03:54:57 GetSingleValue result=40 Value=cccccccc 03:54:57 SkyScan query 03:54:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:54:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:58 Parameters OK 03:54:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:58 Set A/D data flow result=40 03:54:58 Set A/D channel type result=40 03:54:58 Set A/D encoding result=40 03:54:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:58 Set channel filter=0.000000e+000 result=40 03:54:58 Config A/D Result=40 03:54:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:58 Get A/D filter: -9.255963e+061 result=40 03:54:58 Get A/D value=-858993460 result=40 03:54:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:58 Parameters OK 03:54:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:58 Set A/D data flow result=40 03:54:58 Set A/D channel type result=40 03:54:58 Set A/D encoding result=40 03:54:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:58 Set channel filter=0.000000e+000 result=40 03:54:58 Config A/D Result=40 03:54:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:58 Get A/D filter: -9.255963e+061 result=40 03:54:58 Get A/D value=-858993460 result=40 03:54:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:58 Aux= 03:54:58 Message to Camera, serial 130053 queued 03:55:35 Received message from Master: op=PointingHead serial=130066 03:55:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:55:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:55:35 Point started: ret=0 03:55:35 point_skyscan result=0 03:55:36 Check angles 03:55:36 SkyScan query 03:55:36 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.885<-13459 Statuses=0009 0009 03:55:36 Msec=0 True Az=153.105 Ze=-21.885 Az status=0009 Ze status=0009 [UTC 2018-12-14 03:55:36] 03:55:36 Check angles 03:55:37 SkyScan query 03:55:37 SkyScan query done: ret=0 az=133.65<-8910 ze=1.335<-11911 Statuses=0009 0009 03:55:37 Msec=750 True Az=133.65 Ze=1.335 Az status=0009 Ze status=0009 03:55:37 Check angles 03:55:37 SkyScan query 03:55:38 SkyScan query done: ret=0 az=117.72<-7848 ze=20.49<-10634 Statuses=0009 0009 03:55:38 Msec=1500 True Az=117.72 Ze=20.49 Az status=0009 Ze status=0009 03:55:38 Check angles 03:55:38 SkyScan query 03:55:39 SkyScan query done: ret=0 az=99.975<-6665 ze=41.925<-9205 Statuses=0009 0009 03:55:39 Msec=2250 True Az=99.975 Ze=41.925 Az status=0009 Ze status=0009 03:55:39 Check angles 03:55:39 SkyScan query 03:55:39 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 03:55:39 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 03:55:39 Check angles 03:55:39 SkyScan query 03:55:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:55:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:55:40 Message to Master queued w/err=0: serial=130066 error=0 03:55:45 Received message from Master: op=Filter serial=130067 03:55:45 Color wheel filter change from 0 to 0 03:55:45 FLIGetFilterPos err=0 currentPosition=0 03:55:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:45 Filter is already there-color wheel unchanged 03:55:45 Received message from Master: op=Shutter serial=130068 03:55:45 Shutter LASER close 03:55:45 Received message from Camera: op=State serial=130070 03:55:45 GetSingleValue result=40 Value=cccccccc 03:55:45 SkyScan query 03:55:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:55:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:46 Parameters OK 03:55:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:46 Set A/D data flow result=40 03:55:46 Set A/D channel type result=40 03:55:46 Set A/D encoding result=40 03:55:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:46 Set channel filter=0.000000e+000 result=40 03:55:46 Config A/D Result=40 03:55:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:46 Get A/D filter: -9.255963e+061 result=40 03:55:46 Get A/D value=-858993460 result=40 03:55:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:46 Parameters OK 03:55:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:46 Set A/D data flow result=40 03:55:46 Set A/D channel type result=40 03:55:46 Set A/D encoding result=40 03:55:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:46 Set channel filter=0.000000e+000 result=40 03:55:46 Config A/D Result=40 03:55:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:46 Get A/D filter: -9.255963e+061 result=40 03:55:46 Get A/D value=-858993460 result=40 03:55:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:46 Aux= 03:55:46 Message to Camera, serial 130070 queued [UTC 2018-12-14 03:55:52] 03:56:23 Received message from Master: op=PointingHead serial=130083 03:56:23 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:56:23 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:56:23 Point started: ret=0 03:56:23 point_skyscan result=0 03:56:24 Check angles 03:56:24 SkyScan query 03:56:24 SkyScan query done: ret=0 az=85.995<-5733 ze=21.375<-10575 Statuses=0008 0009 03:56:24 Msec=0 True Az=85.995 Ze=21.375 Az status=0008 Ze status=0009 03:56:25 Check angles 03:56:25 SkyScan query 03:56:25 SkyScan query done: ret=0 az=85.995<-5733 ze=0.405<-11973 Statuses=0008 0009 03:56:25 Msec=750 True Az=85.995 Ze=0.405 Az status=0008 Ze status=0009 03:56:25 Check angles 03:56:25 SkyScan query 03:56:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.97<-13398 Statuses=0008 0009 03:56:26 Msec=1500 True Az=85.995 Ze=-20.97 Az status=0008 Ze status=0009 03:56:26 Check angles 03:56:26 SkyScan query 03:56:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.39<-14826 Statuses=0008 0009 03:56:27 Msec=2250 True Az=85.995 Ze=-42.39 Az status=0008 Ze status=0009 03:56:27 Check angles 03:56:27 SkyScan query 03:56:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 03:56:28 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 03:56:28 Message to Master queued w/err=0: serial=130083 error=0 03:56:33 Received message from Master: op=Filter serial=130084 03:56:33 Color wheel filter change from 0 to 0 03:56:33 FLIGetFilterPos err=0 currentPosition=0 03:56:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:33 Filter is already there-color wheel unchanged 03:56:33 Received message from Master: op=Shutter serial=130085 03:56:33 Shutter LASER close 03:56:33 Received message from Camera: op=State serial=130087 03:56:33 GetSingleValue result=40 Value=cccccccc 03:56:33 SkyScan query 03:56:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:56:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:33 Parameters OK 03:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:33 Set A/D data flow result=40 03:56:33 Set A/D channel type result=40 03:56:33 Set A/D encoding result=40 03:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:33 Set channel filter=0.000000e+000 result=40 03:56:33 Config A/D Result=40 03:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:33 Get A/D filter: -9.255963e+061 result=40 03:56:33 Get A/D value=-858993460 result=40 03:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:33 Parameters OK 03:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:33 Set A/D data flow result=40 03:56:33 Set A/D channel type result=40 03:56:33 Set A/D encoding result=40 03:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:33 Set channel filter=0.000000e+000 result=40 03:56:33 Config A/D Result=40 03:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:33 Get A/D filter: -9.255963e+061 result=40 03:56:33 Get A/D value=-858993460 result=40 03:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:33 Aux= 03:56:33 Message to Camera, serial 130087 queued 03:57:10 Received message from Master: op=PointingHead serial=130100 03:57:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:57:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:57:10 Point started: ret=0 03:57:10 point_skyscan result=0 03:57:11 Check angles 03:57:11 SkyScan query 03:57:12 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.03<-17402 Statuses=0009 0009 03:57:12 Msec=0 True Az=108.795 Ze=-81.03 Az status=0009 Ze status=0009 03:57:12 Check angles 03:57:12 SkyScan query 03:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102<-18800 Statuses=0008 0009 03:57:13 Msec=750 True Az=112.995 Ze=-102 Az status=0008 Ze status=0009 03:57:13 Check angles 03:57:13 SkyScan query 03:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.955<-20197 Statuses=0008 0009 03:57:13 Msec=1500 True Az=112.995 Ze=-122.955 Az status=0008 Ze status=0009 03:57:13 Check angles 03:57:13 SkyScan query 03:57:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 03:57:14 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 03:57:14 Check angles 03:57:14 SkyScan query 03:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.85<-22990 Statuses=0008 0009 03:57:15 Msec=3000 True Az=112.995 Ze=-164.85 Az status=0008 Ze status=0009 03:57:15 Check angles 03:57:15 SkyScan query 03:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:57:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:57:16 Message to Master queued w/err=0: serial=130100 error=0 03:57:21 Received message from Master: op=Filter serial=130101 03:57:21 Color wheel filter change from 0 to 0 03:57:21 FLIGetFilterPos err=0 currentPosition=0 03:57:21 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:21 Filter is already there-color wheel unchanged 03:57:21 Received message from Master: op=Shutter serial=130102 03:57:21 Shutter LASER open 03:57:21 Received message from Camera: op=State serial=130104 03:57:21 GetSingleValue result=40 Value=cccccccc 03:57:21 SkyScan query 03:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:57:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:21 Parameters OK 03:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:21 Set A/D data flow result=40 03:57:21 Set A/D channel type result=40 03:57:21 Set A/D encoding result=40 03:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:21 Set channel filter=0.000000e+000 result=40 03:57:21 Config A/D Result=40 03:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:21 Get A/D filter: -9.255963e+061 result=40 03:57:21 Get A/D value=-858993460 result=40 03:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:21 Parameters OK 03:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:21 Set A/D data flow result=40 03:57:21 Set A/D channel type result=40 03:57:21 Set A/D encoding result=40 03:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:21 Set channel filter=0.000000e+000 result=40 03:57:21 Config A/D Result=40 03:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:21 Get A/D filter: -9.255963e+061 result=40 03:57:21 Get A/D value=-858993460 result=40 03:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:21 Aux= 03:57:21 Message to Camera, serial 130104 queued 03:57:30 Received message from Master: op=Shutter serial=130114 03:57:30 Shutter LASER close 03:57:30 Received message from Master: op=PointingHead serial=130118 03:57:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:57:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:57:31 Point started: ret=0 03:57:31 point_skyscan result=0 03:57:31 Check angles 03:57:31 SkyScan query 03:57:32 SkyScan query done: ret=0 az=89.625<-5975 ze=156.855<-1543 Statuses=0009 0009 03:57:32 Msec=0 True Az=89.625 Ze=156.855 Az status=0009 Ze status=0009 03:57:32 Check angles 03:57:32 SkyScan query 03:57:33 SkyScan query done: ret=0 az=72.045<-4803 ze=135.885<-2941 Statuses=0009 0009 03:57:33 Msec=750 True Az=72.045 Ze=135.885 Az status=0009 Ze status=0009 03:57:33 Check angles 03:57:33 SkyScan query 03:57:34 SkyScan query done: ret=0 az=54.75<-3650 ze=114.93<-4338 Statuses=0009 0009 03:57:34 Msec=1500 True Az=54.75 Ze=114.93 Az status=0009 Ze status=0009 03:57:34 Check angles 03:57:34 SkyScan query 03:57:34 SkyScan query done: ret=0 az=40.98<-2732 ze=93.96<-5736 Statuses=0009 0009 03:57:34 Msec=2250 True Az=40.98 Ze=93.96 Az status=0009 Ze status=0009 03:57:34 Check angles 03:57:34 SkyScan query 03:57:35 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 03:57:35 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 03:57:35 Check angles 03:57:35 SkyScan query 03:57:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 03:57:36 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 03:57:36 Check angles 03:57:36 SkyScan query 03:57:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:57:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:57:37 Message to Master queued w/err=0: serial=130118 error=0 03:57:42 Received message from Master: op=Filter serial=130119 03:57:42 Color wheel filter change from 0 to 0 03:57:42 FLIGetFilterPos err=0 currentPosition=0 03:57:42 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:42 Filter is already there-color wheel unchanged 03:57:42 Received message from Master: op=Shutter serial=130120 03:57:42 Shutter LASER close 03:57:42 Received message from Camera: op=State serial=130122 03:57:42 GetSingleValue result=40 Value=cccccccc 03:57:42 SkyScan query 03:57:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:57:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:42 Parameters OK 03:57:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:42 Set A/D data flow result=40 03:57:42 Set A/D channel type result=40 03:57:42 Set A/D encoding result=40 03:57:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:42 Set channel filter=0.000000e+000 result=40 03:57:42 Config A/D Result=40 03:57:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:42 Get A/D filter: -9.255963e+061 result=40 03:57:42 Get A/D value=-858993460 result=40 03:57:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:42 Parameters OK 03:57:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:42 Set A/D data flow result=40 03:57:42 Set A/D channel type result=40 03:57:42 Set A/D encoding result=40 03:57:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:42 Set channel filter=0.000000e+000 result=40 03:57:42 Config A/D Result=40 03:57:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:42 Get A/D filter: -9.255963e+061 result=40 03:57:42 Get A/D value=-858993460 result=40 03:57:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:42 Aux= 03:57:42 Message to Camera, serial 130122 queued 03:58:19 Received message from Master: op=PointingHead serial=130135 03:58:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:58:19 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:58:20 Point started: ret=0 03:58:20 point_skyscan result=0 03:58:21 Check angles 03:58:21 SkyScan query 03:58:21 SkyScan query done: ret=0 az=40.995<-2733 ze=21.33<-10578 Statuses=0008 0009 03:58:21 Msec=0 True Az=40.995 Ze=21.33 Az status=0008 Ze status=0009 03:58:21 Check angles 03:58:21 SkyScan query 03:58:22 SkyScan query done: ret=0 az=40.995<-2733 ze=0.36<-11976 Statuses=0008 0009 03:58:22 Msec=750 True Az=40.995 Ze=0.36 Az status=0008 Ze status=0009 03:58:22 Check angles 03:58:22 SkyScan query 03:58:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.015<-13401 Statuses=0008 0009 03:58:23 Msec=1500 True Az=40.995 Ze=-21.015 Az status=0008 Ze status=0009 03:58:23 Check angles 03:58:23 SkyScan query 03:58:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:58:23 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:58:24 Check angles 03:58:24 SkyScan query 03:58:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:58:24 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:58:24 Message to Master queued w/err=0: serial=130135 error=0 03:58:29 Received message from Master: op=Filter serial=130136 03:58:29 Color wheel filter change from 0 to 0 03:58:29 FLIGetFilterPos err=0 currentPosition=0 03:58:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:29 Filter is already there-color wheel unchanged 03:58:29 Received message from Master: op=Shutter serial=130137 03:58:29 Shutter LASER close 03:58:29 Received message from Camera: op=State serial=130139 03:58:29 GetSingleValue result=40 Value=cccccccc 03:58:29 SkyScan query 03:58:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:58:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:30 Parameters OK 03:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:30 Set A/D data flow result=40 03:58:30 Set A/D channel type result=40 03:58:30 Set A/D encoding result=40 03:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:30 Set channel filter=0.000000e+000 result=40 03:58:30 Config A/D Result=40 03:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:30 Get A/D filter: -9.255963e+061 result=40 03:58:30 Get A/D value=-858993460 result=40 03:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:30 Parameters OK 03:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:30 Set A/D data flow result=40 03:58:30 Set A/D channel type result=40 03:58:30 Set A/D encoding result=40 03:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:30 Set channel filter=0.000000e+000 result=40 03:58:30 Config A/D Result=40 03:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:30 Get A/D filter: -9.255963e+061 result=40 03:58:30 Get A/D value=-858993460 result=40 03:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:30 Aux= 03:58:30 Message to Camera, serial 130139 queued 03:59:06 Received message from Master: op=PointingHead serial=130151 03:59:06 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:59:06 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:59:06 Point started: ret=0 03:59:06 point_skyscan result=0 03:59:07 Check angles 03:59:07 SkyScan query 03:59:08 SkyScan query done: ret=0 az=64.035<-4269 ze=-68.355<-16557 Statuses=0009 0009 03:59:08 Msec=0 True Az=64.035 Ze=-68.355 Az status=0009 Ze status=0009 03:59:08 Check angles 03:59:08 SkyScan query 03:59:08 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.355<-17957 Statuses=0009 0009 03:59:08 Msec=750 True Az=81.39 Ze=-89.355 Az status=0009 Ze status=0009 03:59:08 Check angles 03:59:08 SkyScan query 03:59:09 SkyScan query done: ret=0 az=98.955<-6597 ze=-110.295<-19353 Statuses=0009 0009 03:59:09 Msec=1500 True Az=98.955 Ze=-110.295 Az status=0009 Ze status=0009 03:59:09 Check angles 03:59:09 SkyScan query 03:59:10 SkyScan query done: ret=0 az=116.445<-7763 ze=-131.22<-20748 Statuses=0009 0009 03:59:10 Msec=2250 True Az=116.445 Ze=-131.22 Az status=0009 Ze status=0009 03:59:10 Check angles 03:59:10 SkyScan query 03:59:11 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 03:59:11 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 03:59:11 Check angles 03:59:11 SkyScan query 03:59:11 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:59:11 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:59:11 Message to Master queued w/err=0: serial=130151 error=0 03:59:16 Received message from Master: op=Filter serial=130152 03:59:16 Color wheel filter change from 0 to 0 03:59:16 FLIGetFilterPos err=0 currentPosition=0 03:59:16 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:16 Filter is already there-color wheel unchanged 03:59:16 Received message from Master: op=Shutter serial=130153 03:59:16 Shutter LASER close 03:59:16 Received message from Camera: op=State serial=130155 03:59:16 GetSingleValue result=40 Value=cccccccc 03:59:16 SkyScan query 03:59:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:59:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:17 Parameters OK 03:59:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:17 Set A/D data flow result=40 03:59:17 Set A/D channel type result=40 03:59:17 Set A/D encoding result=40 03:59:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:17 Set channel filter=0.000000e+000 result=40 03:59:17 Config A/D Result=40 03:59:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:17 Get A/D filter: -9.255963e+061 result=40 03:59:17 Get A/D value=-858993460 result=40 03:59:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:17 Parameters OK 03:59:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:17 Set A/D data flow result=40 03:59:17 Set A/D channel type result=40 03:59:17 Set A/D encoding result=40 03:59:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:17 Set channel filter=0.000000e+000 result=40 03:59:17 Config A/D Result=40 03:59:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:17 Get A/D filter: -9.255963e+061 result=40 03:59:17 Get A/D value=-858993460 result=40 03:59:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:17 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:17 Aux= 03:59:17 Message to Camera, serial 130155 queued 03:59:54 Received message from Master: op=PointingHead serial=130168 03:59:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:59:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:59:54 Point started: ret=0 03:59:54 point_skyscan result=0 03:59:55 Check angles 03:59:55 SkyScan query 03:59:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0009 0009 03:59:56 Msec=0 True Az=112.995 Ze=-171.51 Az status=0009 Ze status=0009 03:59:56 Check angles 03:59:56 SkyScan query 03:59:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:59:56 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:59:56 Message to Master queued w/err=0: serial=130168 error=0 04:00:01 Received message from Master: op=Filter serial=130169 04:00:01 Color wheel filter change from 0 to 0 04:00:01 FLIGetFilterPos err=0 currentPosition=0 04:00:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:01 Filter is already there-color wheel unchanged 04:00:02 Received message from Master: op=Shutter serial=130170 04:00:02 Shutter LASER open 04:00:02 Received message from Camera: op=State serial=130172 04:00:02 GetSingleValue result=40 Value=cccccccc 04:00:02 SkyScan query 04:00:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:00:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:02 Parameters OK 04:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:02 Set A/D data flow result=40 04:00:02 Set A/D channel type result=40 04:00:02 Set A/D encoding result=40 04:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:02 Set channel filter=0.000000e+000 result=40 04:00:02 Config A/D Result=40 04:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:02 Get A/D filter: -9.255963e+061 result=40 04:00:02 Get A/D value=-858993460 result=40 04:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:02 Parameters OK 04:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:02 Set A/D data flow result=40 04:00:02 Set A/D channel type result=40 04:00:02 Set A/D encoding result=40 04:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:02 Set channel filter=0.000000e+000 result=40 04:00:02 Config A/D Result=40 04:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:02 Get A/D filter: -9.255963e+061 result=40 04:00:02 Get A/D value=-858993460 result=40 04:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:02 Aux= 04:00:02 Message to Camera, serial 130172 queued 04:00:11 Received message from Master: op=Shutter serial=130182 04:00:11 Shutter LASER close 04:00:11 Received message from Master: op=PointingHead serial=130186 04:00:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:00:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:00:12 Point started: ret=0 04:00:12 point_skyscan result=0 04:00:12 Check angles 04:00:12 SkyScan query 04:00:13 SkyScan query done: ret=0 az=136.17<-9078 ze=-142.935<-21529 Statuses=0009 0009 04:00:13 Msec=0 True Az=136.17 Ze=-142.935 Az status=0009 Ze status=0009 04:00:13 Check angles 04:00:13 SkyScan query 04:00:14 SkyScan query done: ret=0 az=153.675<-10245 ze=-121.965<-20131 Statuses=0009 0009 04:00:14 Msec=750 True Az=153.675 Ze=-121.965 Az status=0009 Ze status=0009 04:00:14 Check angles 04:00:14 SkyScan query 04:00:14 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.53<-18702 Statuses=0009 0009 04:00:14 Msec=1500 True Az=171.555 Ze=-100.53 Az status=0009 Ze status=0009 04:00:15 Check angles 04:00:15 SkyScan query 04:00:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.62<-17308 Statuses=0008 0009 04:00:15 Msec=2250 True Az=176.01 Ze=-79.62 Az status=0008 Ze status=0009 04:00:15 Check angles 04:00:15 SkyScan query 04:00:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.65<-15910 Statuses=0008 0009 04:00:16 Msec=3000 True Az=176.01 Ze=-58.65 Az status=0008 Ze status=0009 04:00:16 Check angles 04:00:16 SkyScan query 04:00:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:00:17 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:00:17 Message to Master queued w/err=0: serial=130186 error=0 04:00:22 Received message from Master: op=Filter serial=130187 04:00:22 Color wheel filter change from 0 to 0 04:00:22 FLIGetFilterPos err=0 currentPosition=0 04:00:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:22 Filter is already there-color wheel unchanged 04:00:22 Received message from Master: op=Shutter serial=130188 04:00:22 Shutter LASER close 04:00:22 Received message from Camera: op=State serial=130190 04:00:22 GetSingleValue result=40 Value=cccccccc 04:00:22 SkyScan query 04:00:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:00:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:23 Parameters OK 04:00:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:23 Set A/D data flow result=40 04:00:23 Set A/D channel type result=40 04:00:23 Set A/D encoding result=40 04:00:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:23 Set channel filter=0.000000e+000 result=40 04:00:23 Config A/D Result=40 04:00:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:23 Get A/D filter: -9.255963e+061 result=40 04:00:23 Get A/D value=-858993460 result=40 04:00:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:23 Parameters OK 04:00:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:23 Set A/D data flow result=40 04:00:23 Set A/D channel type result=40 04:00:23 Set A/D encoding result=40 04:00:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:23 Set channel filter=0.000000e+000 result=40 04:00:23 Config A/D Result=40 04:00:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:23 Get A/D filter: -9.255963e+061 result=40 04:00:23 Get A/D value=-858993460 result=40 04:00:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:23 Aux= 04:00:23 Message to Camera, serial 130190 queued 04:01:00 Received message from Master: op=PointingHead serial=130203 04:01:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:01:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:01:00 Point started: ret=0 04:01:00 point_skyscan result=0 04:01:01 Check angles 04:01:01 SkyScan query 04:01:01 SkyScan query done: ret=0 az=153.105<-10207 ze=-22.02<-13468 Statuses=0009 0009 04:01:01 Msec=0 True Az=153.105 Ze=-22.02 Az status=0009 Ze status=0009 04:01:01 Check angles 04:01:01 SkyScan query 04:01:02 SkyScan query done: ret=0 az=135.735<-9049 ze=-1.02<-12068 Statuses=0009 0009 04:01:02 Msec=750 True Az=135.735 Ze=-1.02 Az status=0009 Ze status=0009 04:01:02 Check angles 04:01:02 SkyScan query 04:01:03 SkyScan query done: ret=0 az=118.11<-7874 ze=19.905<-10673 Statuses=0009 0009 04:01:03 Msec=1500 True Az=118.11 Ze=19.905 Az status=0009 Ze status=0009 04:01:03 Check angles 04:01:03 SkyScan query 04:01:03 SkyScan query done: ret=0 az=100.725<-6715 ze=40.89<-9274 Statuses=0009 0009 04:01:03 Msec=2250 True Az=100.725 Ze=40.89 Az status=0009 Ze status=0009 04:01:04 Check angles 04:01:04 SkyScan query 04:01:04 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 04:01:04 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 04:01:04 Check angles 04:01:04 SkyScan query 04:01:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 04:01:05 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 04:01:05 Message to Master queued w/err=0: serial=130203 error=0 04:01:10 Received message from Master: op=Filter serial=130204 04:01:10 Color wheel filter change from 0 to 0 04:01:10 FLIGetFilterPos err=0 currentPosition=0 04:01:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:10 Filter is already there-color wheel unchanged 04:01:10 Received message from Master: op=Shutter serial=130205 04:01:10 Shutter LASER close 04:01:10 Received message from Camera: op=State serial=130207 04:01:10 GetSingleValue result=40 Value=cccccccc 04:01:10 SkyScan query 04:01:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:01:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:11 Parameters OK 04:01:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:11 Set A/D data flow result=40 04:01:11 Set A/D channel type result=40 04:01:11 Set A/D encoding result=40 04:01:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:11 Set channel filter=0.000000e+000 result=40 04:01:11 Config A/D Result=40 04:01:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:11 Get A/D filter: -9.255963e+061 result=40 04:01:11 Get A/D value=-858993460 result=40 04:01:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:11 Parameters OK 04:01:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:11 Set A/D data flow result=40 04:01:11 Set A/D channel type result=40 04:01:11 Set A/D encoding result=40 04:01:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:11 Set channel filter=0.000000e+000 result=40 04:01:11 Config A/D Result=40 04:01:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:11 Get A/D filter: -9.255963e+061 result=40 04:01:11 Get A/D value=-858993460 result=40 04:01:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:11 Aux= 04:01:11 Message to Camera, serial 130207 queued 04:01:48 Received message from Master: op=PointingHead serial=130220 04:01:48 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:01:48 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:01:48 Point started: ret=0 04:01:48 point_skyscan result=0 04:01:49 Check angles 04:01:49 SkyScan query 04:01:49 SkyScan query done: ret=0 az=85.995<-5733 ze=21.45<-10570 Statuses=0008 0009 04:01:49 Msec=0 True Az=85.995 Ze=21.45 Az status=0008 Ze status=0009 04:01:50 Check angles 04:01:50 SkyScan query 04:01:50 SkyScan query done: ret=0 az=85.995<-5733 ze=0.045<-11997 Statuses=0008 0009 04:01:50 Msec=750 True Az=85.995 Ze=0.045 Az status=0008 Ze status=0009 04:01:50 Check angles 04:01:50 SkyScan query 04:01:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.88<-13392 Statuses=0008 0009 04:01:51 Msec=1500 True Az=85.995 Ze=-20.88 Az status=0008 Ze status=0009 04:01:51 Check angles 04:01:51 SkyScan query 04:01:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.3<-14820 Statuses=0008 0009 04:01:52 Msec=2250 True Az=85.995 Ze=-42.3 Az status=0008 Ze status=0009 04:01:52 Check angles 04:01:52 SkyScan query 04:01:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 04:01:52 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 04:01:52 Message to Master queued w/err=0: serial=130220 error=0 04:01:57 Received message from Master: op=Filter serial=130221 04:01:57 Color wheel filter change from 0 to 0 04:01:57 FLIGetFilterPos err=0 currentPosition=0 04:01:57 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:57 Filter is already there-color wheel unchanged 04:01:58 Received message from Master: op=Shutter serial=130222 04:01:58 Shutter LASER close 04:01:58 Received message from Camera: op=State serial=130224 04:01:58 GetSingleValue result=40 Value=cccccccc 04:01:58 SkyScan query 04:01:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:01:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:58 Parameters OK 04:01:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:58 Set A/D data flow result=40 04:01:58 Set A/D channel type result=40 04:01:58 Set A/D encoding result=40 04:01:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:58 Set channel filter=0.000000e+000 result=40 04:01:58 Config A/D Result=40 04:01:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:58 Get A/D filter: -9.255963e+061 result=40 04:01:58 Get A/D value=-858993460 result=40 04:01:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:58 Parameters OK 04:01:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:58 Set A/D data flow result=40 04:01:58 Set A/D channel type result=40 04:01:58 Set A/D encoding result=40 04:01:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:58 Set channel filter=0.000000e+000 result=40 04:01:58 Config A/D Result=40 04:01:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:58 Get A/D filter: -9.255963e+061 result=40 04:01:58 Get A/D value=-858993460 result=40 04:01:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:58 Aux= 04:01:58 Message to Camera, serial 130224 queued 04:02:35 Received message from Master: op=PointingHead serial=130237 04:02:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:02:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:02:35 Point started: ret=0 04:02:35 point_skyscan result=0 04:02:36 Check angles 04:02:36 SkyScan query 04:02:37 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.69<-17446 Statuses=0009 0009 04:02:37 Msec=0 True Az=109.335 Ze=-81.69 Az status=0009 Ze status=0009 04:02:37 Check angles 04:02:37 SkyScan query 04:02:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.05<-18870 Statuses=0008 0009 04:02:37 Msec=750 True Az=112.995 Ze=-103.05 Az status=0008 Ze status=0009 04:02:38 Check angles 04:02:38 SkyScan query 04:02:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.44<-20296 Statuses=0008 0009 04:02:38 Msec=1500 True Az=112.995 Ze=-124.44 Az status=0008 Ze status=0009 04:02:38 Check angles 04:02:38 SkyScan query 04:02:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.425<-21695 Statuses=0008 0009 04:02:39 Msec=2250 True Az=112.995 Ze=-145.425 Az status=0008 Ze status=0009 04:02:39 Check angles 04:02:39 SkyScan query 04:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.35<-23090 Statuses=0008 0009 04:02:40 Msec=3000 True Az=112.995 Ze=-166.35 Az status=0008 Ze status=0009 04:02:40 Check angles 04:02:40 SkyScan query 04:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:02:40 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:02:40 Message to Master queued w/err=0: serial=130237 error=0 04:02:45 Received message from Master: op=Filter serial=130238 04:02:45 Color wheel filter change from 0 to 0 04:02:45 FLIGetFilterPos err=0 currentPosition=0 04:02:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:45 Filter is already there-color wheel unchanged 04:02:46 Received message from Master: op=Shutter serial=130239 04:02:46 Shutter LASER open 04:02:46 Received message from Camera: op=State serial=130241 04:02:46 GetSingleValue result=40 Value=cccccccc 04:02:46 SkyScan query 04:02:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:02:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:46 Parameters OK 04:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:46 Set A/D data flow result=40 04:02:46 Set A/D channel type result=40 04:02:46 Set A/D encoding result=40 04:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:46 Set channel filter=0.000000e+000 result=40 04:02:46 Config A/D Result=40 04:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:46 Get A/D filter: -9.255963e+061 result=40 04:02:46 Get A/D value=-858993460 result=40 04:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:46 Parameters OK 04:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:46 Set A/D data flow result=40 04:02:46 Set A/D channel type result=40 04:02:46 Set A/D encoding result=40 04:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:46 Set channel filter=0.000000e+000 result=40 04:02:46 Config A/D Result=40 04:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:46 Get A/D filter: -9.255963e+061 result=40 04:02:46 Get A/D value=-858993460 result=40 04:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:46 Aux= 04:02:46 Message to Camera, serial 130241 queued 04:02:55 Received message from Master: op=Shutter serial=130251 04:02:55 Shutter LASER close 04:02:55 Received message from Master: op=PointingHead serial=130255 04:02:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:02:55 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:02:56 Point started: ret=0 04:02:56 point_skyscan result=0 04:02:56 Check angles 04:02:56 SkyScan query 04:02:57 SkyScan query done: ret=0 az=89.82<-5988 ze=157.245<-1517 Statuses=0009 0009 04:02:57 Msec=0 True Az=89.82 Ze=157.245 Az status=0009 Ze status=0009 04:02:57 Check angles 04:02:57 SkyScan query 04:02:58 SkyScan query done: ret=0 az=72.39<-4826 ze=136.26<-2916 Statuses=0009 0009 04:02:58 Msec=750 True Az=72.39 Ze=136.26 Az status=0009 Ze status=0009 04:02:58 Check angles 04:02:58 SkyScan query 04:02:59 SkyScan query done: ret=0 az=55.095<-3673 ze=115.32<-4312 Statuses=0009 0009 04:02:59 Msec=1500 True Az=55.095 Ze=115.32 Az status=0009 Ze status=0009 04:02:59 Check angles 04:02:59 SkyScan query 04:02:59 SkyScan query done: ret=0 az=41.01<-2734 ze=94.35<-5710 Statuses=0009 0009 04:02:59 Msec=2250 True Az=41.01 Ze=94.35 Az status=0009 Ze status=0009 04:02:59 Check angles 04:02:59 SkyScan query 04:03:00 SkyScan query done: ret=0 az=40.995<-2733 ze=73.395<-7107 Statuses=0008 0009 04:03:00 Msec=3000 True Az=40.995 Ze=73.395 Az status=0008 Ze status=0009 04:03:00 Check angles 04:03:00 SkyScan query 04:03:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.83<-8478 Statuses=0008 0009 04:03:01 Msec=3750 True Az=40.995 Ze=52.83 Az status=0008 Ze status=0009 04:03:01 Check angles 04:03:01 SkyScan query 04:03:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:03:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:03:02 Message to Master queued w/err=0: serial=130255 error=0 04:03:07 Received message from Master: op=Filter serial=130256 04:03:07 Color wheel filter change from 0 to 0 04:03:07 FLIGetFilterPos err=0 currentPosition=0 04:03:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:07 Filter is already there-color wheel unchanged 04:03:07 Received message from Master: op=Shutter serial=130257 04:03:07 Shutter LASER close 04:03:07 Received message from Camera: op=State serial=130259 04:03:07 GetSingleValue result=40 Value=cccccccc 04:03:07 SkyScan query 04:03:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:03:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:07 Parameters OK 04:03:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:07 Set A/D data flow result=40 04:03:07 Set A/D channel type result=40 04:03:07 Set A/D encoding result=40 04:03:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:07 Set channel filter=0.000000e+000 result=40 04:03:07 Config A/D Result=40 04:03:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:07 Get A/D filter: -9.255963e+061 result=40 04:03:07 Get A/D value=-858993460 result=40 04:03:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:07 Parameters OK 04:03:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:07 Set A/D data flow result=40 04:03:07 Set A/D channel type result=40 04:03:07 Set A/D encoding result=40 04:03:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:07 Set channel filter=0.000000e+000 result=40 04:03:07 Config A/D Result=40 04:03:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:07 Get A/D filter: -9.255963e+061 result=40 04:03:07 Get A/D value=-858993460 result=40 04:03:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:07 Aux= 04:03:07 Message to Camera, serial 130259 queued 04:03:44 Received message from Master: op=PointingHead serial=130272 04:03:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:03:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:03:45 Point started: ret=0 04:03:45 point_skyscan result=0 04:03:46 Check angles 04:03:46 SkyScan query 04:03:46 SkyScan query done: ret=0 az=40.995<-2733 ze=21.21<-10586 Statuses=0008 0009 04:03:46 Msec=0 True Az=40.995 Ze=21.21 Az status=0008 Ze status=0009 04:03:46 Check angles 04:03:46 SkyScan query 04:03:47 SkyScan query done: ret=0 az=40.995<-2733 ze=0.21<-11986 Statuses=0008 0009 04:03:47 Msec=750 True Az=40.995 Ze=0.21 Az status=0008 Ze status=0009 04:03:47 Check angles 04:03:47 SkyScan query 04:03:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.7<-13380 Statuses=0008 0009 04:03:48 Msec=1500 True Az=40.995 Ze=-20.7 Az status=0008 Ze status=0009 04:03:48 Check angles 04:03:48 SkyScan query 04:03:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 04:03:48 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 04:03:49 Check angles 04:03:49 SkyScan query 04:03:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 04:03:49 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 04:03:49 Message to Master queued w/err=0: serial=130272 error=0 04:03:54 Received message from Master: op=Filter serial=130273 04:03:54 Color wheel filter change from 0 to 0 04:03:54 FLIGetFilterPos err=0 currentPosition=0 04:03:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:54 Filter is already there-color wheel unchanged 04:03:54 Received message from Master: op=Shutter serial=130274 04:03:54 Shutter LASER close 04:03:54 Received message from Camera: op=State serial=130276 04:03:54 GetSingleValue result=40 Value=cccccccc 04:03:54 SkyScan query 04:03:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:03:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:55 Parameters OK 04:03:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:55 Set A/D data flow result=40 04:03:55 Set A/D channel type result=40 04:03:55 Set A/D encoding result=40 04:03:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:55 Set channel filter=0.000000e+000 result=40 04:03:55 Config A/D Result=40 04:03:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:55 Get A/D filter: -9.255963e+061 result=40 04:03:55 Get A/D value=-858993460 result=40 04:03:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:55 Parameters OK 04:03:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:55 Set A/D data flow result=40 04:03:55 Set A/D channel type result=40 04:03:55 Set A/D encoding result=40 04:03:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:55 Set channel filter=0.000000e+000 result=40 04:03:55 Config A/D Result=40 04:03:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:55 Get A/D filter: -9.255963e+061 result=40 04:03:55 Get A/D value=-858993460 result=40 04:03:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:55 Aux= 04:03:55 Message to Camera, serial 130276 queued 04:04:32 Received message from Master: op=PointingHead serial=130289 04:04:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:04:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:04:32 Point started: ret=0 04:04:32 point_skyscan result=0 04:04:33 Check angles 04:04:33 SkyScan query 04:04:33 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.115<-16541 Statuses=0009 0009 04:04:33 Msec=0 True Az=63.84 Ze=-68.115 Az status=0009 Ze status=0009 04:04:34 Check angles 04:04:34 SkyScan query 04:04:34 SkyScan query done: ret=0 az=81.705<-5447 ze=-89.565<-17971 Statuses=0009 0009 04:04:34 Msec=750 True Az=81.705 Ze=-89.565 Az status=0009 Ze status=0009 04:04:34 Check angles 04:04:34 SkyScan query 04:04:35 SkyScan query done: ret=0 az=99.585<-6639 ze=-110.925<-19395 Statuses=0009 0009 04:04:35 Msec=1500 True Az=99.585 Ze=-110.925 Az status=0009 Ze status=0009 04:04:35 Check angles 04:04:35 SkyScan query 04:04:36 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.85<-20790 Statuses=0009 0009 04:04:36 Msec=2250 True Az=117.045 Ze=-131.85 Az status=0009 Ze status=0009 04:04:36 Check angles 04:04:36 SkyScan query 04:04:36 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 04:04:36 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 04:04:37 Check angles 04:04:37 SkyScan query 04:04:37 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:04:37 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:04:37 Message to Master queued w/err=0: serial=130289 error=0 04:04:42 Received message from Master: op=Filter serial=130290 04:04:42 Color wheel filter change from 0 to 0 04:04:42 FLIGetFilterPos err=0 currentPosition=0 04:04:42 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:42 Filter is already there-color wheel unchanged 04:04:42 Received message from Master: op=Shutter serial=130291 04:04:42 Shutter LASER close 04:04:42 Received message from Camera: op=State serial=130293 04:04:42 GetSingleValue result=40 Value=cccccccc 04:04:42 SkyScan query 04:04:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:04:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:43 Parameters OK 04:04:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:43 Set A/D data flow result=40 04:04:43 Set A/D channel type result=40 04:04:43 Set A/D encoding result=40 04:04:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:43 Set channel filter=0.000000e+000 result=40 04:04:43 Config A/D Result=40 04:04:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:43 Get A/D filter: -9.255963e+061 result=40 04:04:43 Get A/D value=-858993460 result=40 04:04:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:43 Parameters OK 04:04:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:43 Set A/D data flow result=40 04:04:43 Set A/D channel type result=40 04:04:43 Set A/D encoding result=40 04:04:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:43 Set channel filter=0.000000e+000 result=40 04:04:43 Config A/D Result=40 04:04:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:43 Get A/D filter: -9.255963e+061 result=40 04:04:43 Get A/D value=-858993460 result=40 04:04:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:43 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:43 Aux= 04:04:43 Message to Camera, serial 130293 queued 04:05:19 Received message from Master: op=PointingHead serial=130305 04:05:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:05:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:05:19 Point started: ret=0 04:05:19 point_skyscan result=0 04:05:20 Check angles 04:05:20 SkyScan query 04:05:21 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.495<-23433 Statuses=0008 0009 04:05:21 Msec=0 True Az=113.01 Ze=-171.495 Az status=0008 Ze status=0009 04:05:21 Check angles 04:05:21 SkyScan query 04:05:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:05:21 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:05:21 Message to Master queued w/err=0: serial=130305 error=0 04:05:26 Received message from Master: op=Filter serial=130306 04:05:26 Color wheel filter change from 0 to 0 04:05:26 FLIGetFilterPos err=0 currentPosition=0 04:05:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:26 Filter is already there-color wheel unchanged 04:05:27 Received message from Master: op=Shutter serial=130307 04:05:27 Shutter LASER open 04:05:27 Received message from Camera: op=State serial=130309 04:05:27 GetSingleValue result=40 Value=cccccccc 04:05:27 SkyScan query 04:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:05:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:27 Parameters OK 04:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:27 Set A/D data flow result=40 04:05:27 Set A/D channel type result=40 04:05:27 Set A/D encoding result=40 04:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:27 Set channel filter=0.000000e+000 result=40 04:05:27 Config A/D Result=40 04:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:27 Get A/D filter: -9.255963e+061 result=40 04:05:27 Get A/D value=-858993460 result=40 04:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:27 Parameters OK 04:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:27 Set A/D data flow result=40 04:05:27 Set A/D channel type result=40 04:05:27 Set A/D encoding result=40 04:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:27 Set channel filter=0.000000e+000 result=40 04:05:27 Config A/D Result=40 04:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:27 Get A/D filter: -9.255963e+061 result=40 04:05:27 Get A/D value=-858993460 result=40 04:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:27 Aux= 04:05:27 Message to Camera, serial 130309 queued 04:05:36 Received message from Master: op=Shutter serial=130319 04:05:36 Shutter LASER close 04:05:36 Received message from Master: op=PointingHead serial=130323 04:05:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:05:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:05:37 Point started: ret=0 04:05:37 point_skyscan result=0 04:05:37 Check angles 04:05:37 SkyScan query 04:05:38 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.95<-21530 Statuses=0009 0009 04:05:38 Msec=0 True Az=136.155 Ze=-142.95 Az status=0009 Ze status=0009 04:05:38 Check angles 04:05:38 SkyScan query 04:05:39 SkyScan query done: ret=0 az=153.675<-10245 ze=-121.965<-20131 Statuses=0009 0009 04:05:39 Msec=750 True Az=153.675 Ze=-121.965 Az status=0009 Ze status=0009 04:05:39 Check angles 04:05:39 SkyScan query 04:05:39 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.04<-18736 Statuses=0009 0009 04:05:39 Msec=1500 True Az=171.24 Ze=-101.04 Az status=0009 Ze status=0009 04:05:40 Check angles 04:05:40 SkyScan query 04:05:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.13<-17342 Statuses=0008 0009 04:05:40 Msec=2250 True Az=176.01 Ze=-80.13 Az status=0008 Ze status=0009 04:05:40 Check angles 04:05:40 SkyScan query 04:05:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.145<-15943 Statuses=0008 0009 04:05:41 Msec=3000 True Az=176.01 Ze=-59.145 Az status=0008 Ze status=0009 04:05:41 Check angles 04:05:41 SkyScan query 04:05:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:05:42 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:05:42 Message to Master queued w/err=0: serial=130323 error=0 04:05:47 Received message from Master: op=Filter serial=130324 04:05:47 Color wheel filter change from 0 to 0 04:05:47 FLIGetFilterPos err=0 currentPosition=0 04:05:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:47 Filter is already there-color wheel unchanged 04:05:47 Received message from Master: op=Shutter serial=130325 04:05:47 Shutter LASER close [UTC 2018-12-14 04:05:47] 04:05:47 Received message from Camera: op=State serial=130327 04:05:47 GetSingleValue result=40 Value=cccccccc 04:05:47 SkyScan query 04:05:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:05:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:48 Parameters OK 04:05:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:48 Set A/D data flow result=40 04:05:48 Set A/D channel type result=40 04:05:48 Set A/D encoding result=40 04:05:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:48 Set channel filter=0.000000e+000 result=40 04:05:48 Config A/D Result=40 04:05:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:48 Get A/D filter: -9.255963e+061 result=40 04:05:48 Get A/D value=-858993460 result=40 04:05:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:48 Parameters OK 04:05:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:48 Set A/D data flow result=40 04:05:48 Set A/D channel type result=40 04:05:48 Set A/D encoding result=40 04:05:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:48 Set channel filter=0.000000e+000 result=40 04:05:48 Config A/D Result=40 04:05:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:48 Get A/D filter: -9.255963e+061 result=40 04:05:48 Get A/D value=-858993460 result=40 04:05:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:48 Aux= 04:05:48 Message to Camera, serial 130327 queued 04:06:24 Received message from Master: op=PointingHead serial=130340 04:06:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:06:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:06:25 Point started: ret=0 04:06:25 point_skyscan result=0 04:06:26 Check angles 04:06:26 SkyScan query 04:06:26 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.3<-13420 Statuses=0009 0009 04:06:26 Msec=0 True Az=152.655 Ze=-21.3 Az status=0009 Ze status=0009 04:06:26 Check angles 04:06:26 SkyScan query 04:06:27 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.33<-12022 Statuses=0009 0009 04:06:27 Msec=750 True Az=135.15 Ze=-0.33 Az status=0009 Ze status=0009 04:06:27 Check angles 04:06:27 SkyScan query 04:06:28 SkyScan query done: ret=0 az=117.285<-7819 ze=21.06<-10596 Statuses=0009 0009 04:06:28 Msec=1500 True Az=117.285 Ze=21.06 Az status=0009 Ze status=0009 04:06:28 Check angles 04:06:28 SkyScan query 04:06:28 SkyScan query done: ret=0 az=99.885<-6659 ze=42.015<-9199 Statuses=0009 0009 04:06:28 Msec=2250 True Az=99.885 Ze=42.015 Az status=0009 Ze status=0009 04:06:29 Check angles 04:06:29 SkyScan query 04:06:29 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 04:06:29 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 04:06:29 Check angles 04:06:29 SkyScan query 04:06:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:06:30 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:06:30 Message to Master queued w/err=0: serial=130340 error=0 04:06:35 Received message from Master: op=Filter serial=130341 04:06:35 Color wheel filter change from 0 to 0 04:06:35 FLIGetFilterPos err=0 currentPosition=0 04:06:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:35 Filter is already there-color wheel unchanged 04:06:35 Received message from Master: op=Shutter serial=130342 04:06:35 Shutter LASER close 04:06:35 Received message from Camera: op=State serial=130344 04:06:35 GetSingleValue result=40 Value=cccccccc 04:06:35 SkyScan query 04:06:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:06:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:36 Parameters OK 04:06:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:36 Set A/D data flow result=40 04:06:36 Set A/D channel type result=40 04:06:36 Set A/D encoding result=40 04:06:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:36 Set channel filter=0.000000e+000 result=40 04:06:36 Config A/D Result=40 04:06:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:36 Get A/D filter: -9.255963e+061 result=40 04:06:36 Get A/D value=-858993460 result=40 04:06:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:36 Parameters OK 04:06:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:36 Set A/D data flow result=40 04:06:36 Set A/D channel type result=40 04:06:36 Set A/D encoding result=40 04:06:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:36 Set channel filter=0.000000e+000 result=40 04:06:36 Config A/D Result=40 04:06:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:36 Get A/D filter: -9.255963e+061 result=40 04:06:36 Get A/D value=-858993460 result=40 04:06:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:36 Aux= 04:06:36 Message to Camera, serial 130344 queued 04:07:13 Received message from Master: op=PointingHead serial=130357 04:07:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:07:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:07:13 Point started: ret=0 04:07:13 point_skyscan result=0 04:07:14 Check angles 04:07:14 SkyScan query 04:07:14 SkyScan query done: ret=0 az=85.995<-5733 ze=21.15<-10590 Statuses=0008 0009 04:07:14 Msec=0 True Az=85.995 Ze=21.15 Az status=0008 Ze status=0009 04:07:15 Check angles 04:07:15 SkyScan query 04:07:15 SkyScan query done: ret=0 az=85.995<-5733 ze=0.165<-11989 Statuses=0008 0009 04:07:15 Msec=750 True Az=85.995 Ze=0.165 Az status=0008 Ze status=0009 04:07:15 Check angles 04:07:15 SkyScan query 04:07:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.745<-13383 Statuses=0008 0009 04:07:16 Msec=1500 True Az=85.995 Ze=-20.745 Az status=0008 Ze status=0009 04:07:16 Check angles 04:07:16 SkyScan query 04:07:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.745<-14783 Statuses=0008 0009 04:07:17 Msec=2250 True Az=85.995 Ze=-41.745 Az status=0008 Ze status=0009 04:07:17 Check angles 04:07:17 SkyScan query 04:07:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 04:07:17 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 04:07:17 Message to Master queued w/err=0: serial=130357 error=0 04:07:22 Received message from Master: op=Filter serial=130358 04:07:22 Color wheel filter change from 0 to 0 04:07:22 FLIGetFilterPos err=0 currentPosition=0 04:07:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:22 Filter is already there-color wheel unchanged 04:07:23 Received message from Master: op=Shutter serial=130359 04:07:23 Shutter LASER close 04:07:23 Received message from Camera: op=State serial=130361 04:07:23 GetSingleValue result=40 Value=cccccccc 04:07:23 SkyScan query 04:07:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:07:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:23 Parameters OK 04:07:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:23 Set A/D data flow result=40 04:07:23 Set A/D channel type result=40 04:07:23 Set A/D encoding result=40 04:07:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:23 Set channel filter=0.000000e+000 result=40 04:07:23 Config A/D Result=40 04:07:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:23 Get A/D filter: -9.255963e+061 result=40 04:07:23 Get A/D value=-858993460 result=40 04:07:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:23 Parameters OK 04:07:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:23 Set A/D data flow result=40 04:07:23 Set A/D channel type result=40 04:07:23 Set A/D encoding result=40 04:07:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:23 Set channel filter=0.000000e+000 result=40 04:07:23 Config A/D Result=40 04:07:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:23 Get A/D filter: -9.255963e+061 result=40 04:07:23 Get A/D value=-858993460 result=40 04:07:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:23 Aux= 04:07:23 Message to Camera, serial 130361 queued 04:08:00 Received message from Master: op=PointingHead serial=130374 04:08:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:08:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:08:00 Point started: ret=0 04:08:00 point_skyscan result=0 04:08:01 Check angles 04:08:01 SkyScan query 04:08:02 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.435<-17429 Statuses=0009 0009 04:08:02 Msec=0 True Az=109.125 Ze=-81.435 Az status=0009 Ze status=0009 04:08:02 Check angles 04:08:02 SkyScan query 04:08:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.36<-18824 Statuses=0008 0009 04:08:03 Msec=750 True Az=112.995 Ze=-102.36 Az status=0008 Ze status=0009 04:08:03 Check angles 04:08:03 SkyScan query 04:08:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.33<-20222 Statuses=0008 0009 04:08:03 Msec=1500 True Az=112.995 Ze=-123.33 Az status=0008 Ze status=0009 04:08:03 Check angles 04:08:03 SkyScan query 04:08:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.255<-21617 Statuses=0008 0009 04:08:04 Msec=2250 True Az=112.995 Ze=-144.255 Az status=0008 Ze status=0009 04:08:04 Check angles 04:08:04 SkyScan query 04:08:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.21<-23014 Statuses=0008 0009 04:08:05 Msec=3000 True Az=112.995 Ze=-165.21 Az status=0008 Ze status=0009 04:08:05 Check angles 04:08:05 SkyScan query 04:08:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:08:06 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:08:06 Message to Master queued w/err=0: serial=130374 error=0 04:08:11 Received message from Master: op=Filter serial=130375 04:08:11 Color wheel filter change from 0 to 0 04:08:11 FLIGetFilterPos err=0 currentPosition=0 04:08:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:11 Filter is already there-color wheel unchanged 04:08:11 Received message from Master: op=Shutter serial=130376 04:08:11 Shutter LASER open 04:08:11 Received message from Camera: op=State serial=130378 04:08:11 GetSingleValue result=40 Value=cccccccc 04:08:11 SkyScan query 04:08:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:08:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:11 Parameters OK 04:08:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:11 Set A/D data flow result=40 04:08:11 Set A/D channel type result=40 04:08:11 Set A/D encoding result=40 04:08:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:11 Set channel filter=0.000000e+000 result=40 04:08:11 Config A/D Result=40 04:08:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:11 Get A/D filter: -9.255963e+061 result=40 04:08:11 Get A/D value=-858993460 result=40 04:08:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:11 Parameters OK 04:08:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:11 Set A/D data flow result=40 04:08:11 Set A/D channel type result=40 04:08:11 Set A/D encoding result=40 04:08:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:11 Set channel filter=0.000000e+000 result=40 04:08:11 Config A/D Result=40 04:08:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:11 Get A/D filter: -9.255963e+061 result=40 04:08:11 Get A/D value=-858993460 result=40 04:08:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:11 Aux= 04:08:11 Message to Camera, serial 130378 queued 04:08:20 Received message from Master: op=Shutter serial=130388 04:08:20 Shutter LASER close 04:08:20 Received message from Master: op=PointingHead serial=130392 04:08:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:08:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:08:21 Point started: ret=0 04:08:21 point_skyscan result=0 04:08:21 Check angles 04:08:21 SkyScan query 04:08:22 SkyScan query done: ret=0 az=89.505<-5967 ze=156.705<-1553 Statuses=0009 0009 04:08:22 Msec=0 True Az=89.505 Ze=156.705 Az status=0009 Ze status=0009 04:08:22 Check angles 04:08:22 SkyScan query 04:08:23 SkyScan query done: ret=0 az=71.985<-4799 ze=135.735<-2951 Statuses=0009 0009 04:08:23 Msec=750 True Az=71.985 Ze=135.735 Az status=0009 Ze status=0009 04:08:23 Check angles 04:08:23 SkyScan query 04:08:23 SkyScan query done: ret=0 az=54.285<-3619 ze=114.33<-4378 Statuses=0009 0009 04:08:23 Msec=1500 True Az=54.285 Ze=114.33 Az status=0009 Ze status=0009 04:08:24 Check angles 04:08:24 SkyScan query 04:08:24 SkyScan query done: ret=0 az=40.995<-2733 ze=92.97<-5802 Statuses=0009 0009 04:08:24 Msec=2250 True Az=40.995 Ze=92.97 Az status=0009 Ze status=0009 04:08:24 Check angles 04:08:24 SkyScan query 04:08:25 SkyScan query done: ret=0 az=40.995<-2733 ze=72.015<-7199 Statuses=0008 0009 04:08:25 Msec=3000 True Az=40.995 Ze=72.015 Az status=0008 Ze status=0009 04:08:25 Check angles 04:08:25 SkyScan query 04:08:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.065<-8529 Statuses=0008 0009 04:08:26 Msec=3750 True Az=40.995 Ze=52.065 Az status=0008 Ze status=0009 04:08:26 Check angles 04:08:26 SkyScan query 04:08:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:08:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:08:27 Message to Master queued w/err=0: serial=130392 error=0 04:08:32 Received message from Master: op=Filter serial=130393 04:08:32 Color wheel filter change from 0 to 0 04:08:32 FLIGetFilterPos err=0 currentPosition=0 04:08:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:32 Filter is already there-color wheel unchanged 04:08:32 Received message from Master: op=Shutter serial=130394 04:08:32 Shutter LASER close 04:08:32 Received message from Camera: op=State serial=130396 04:08:32 GetSingleValue result=40 Value=cccccccc 04:08:32 SkyScan query 04:08:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:08:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:32 Parameters OK 04:08:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:32 Set A/D data flow result=40 04:08:32 Set A/D channel type result=40 04:08:32 Set A/D encoding result=40 04:08:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:32 Set channel filter=0.000000e+000 result=40 04:08:32 Config A/D Result=40 04:08:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:32 Get A/D filter: -9.255963e+061 result=40 04:08:32 Get A/D value=-858993460 result=40 04:08:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:32 Parameters OK 04:08:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:32 Set A/D data flow result=40 04:08:32 Set A/D channel type result=40 04:08:32 Set A/D encoding result=40 04:08:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:32 Set channel filter=0.000000e+000 result=40 04:08:32 Config A/D Result=40 04:08:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:32 Get A/D filter: -9.255963e+061 result=40 04:08:32 Get A/D value=-858993460 result=40 04:08:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:32 Aux= 04:08:32 Message to Camera, serial 130396 queued 04:09:09 Received message from Master: op=PointingHead serial=130409 04:09:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:09:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:09:10 Point started: ret=0 04:09:10 point_skyscan result=0 04:09:10 Check angles 04:09:10 SkyScan query 04:09:11 SkyScan query done: ret=0 az=63.765<-4251 ze=66.555<-7563 Statuses=0009 0008 04:09:11 Msec=0 True Az=63.765 Ze=66.555 Az status=0009 Ze status=0008 04:09:11 Check angles 04:09:11 SkyScan query 04:09:12 SkyScan query done: ret=0 az=81.585<-5439 ze=66.495<-7567 Statuses=0009 0008 04:09:12 Msec=750 True Az=81.585 Ze=66.495 Az status=0009 Ze status=0008 04:09:12 Check angles 04:09:12 SkyScan query 04:09:12 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 04:09:12 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 04:09:13 Check angles 04:09:13 SkyScan query 04:09:13 SkyScan query done: ret=0 az=116.895<-7793 ze=66.495<-7567 Statuses=0009 0008 04:09:13 Msec=2250 True Az=116.895 Ze=66.495 Az status=0009 Ze status=0008 04:09:13 Check angles 04:09:13 SkyScan query 04:09:14 SkyScan query done: ret=0 az=134.73<-8982 ze=66.495<-7567 Statuses=0009 0008 04:09:14 Msec=3000 True Az=134.73 Ze=66.495 Az status=0009 Ze status=0008 04:09:14 Check angles 04:09:14 SkyScan query 04:09:15 SkyScan query done: ret=0 az=152.13<-10142 ze=66.495<-7567 Statuses=0009 0008 04:09:15 Msec=3750 True Az=152.13 Ze=66.495 Az status=0009 Ze status=0008 04:09:15 Check angles 04:09:15 SkyScan query 04:09:15 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 04:09:15 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 04:09:15 Message to Master queued w/err=0: serial=130409 error=0 04:09:20 Received message from Master: op=Filter serial=130410 04:09:20 Color wheel filter change from 0 to 0 04:09:20 FLIGetFilterPos err=0 currentPosition=0 04:09:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:20 Filter is already there-color wheel unchanged 04:09:21 Received message from Master: op=Shutter serial=130411 04:09:21 Shutter LASER close 04:09:21 Received message from Camera: op=State serial=130413 04:09:21 GetSingleValue result=40 Value=cccccccc 04:09:21 SkyScan query 04:09:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:09:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:21 Parameters OK 04:09:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:21 Set A/D data flow result=40 04:09:21 Set A/D channel type result=40 04:09:21 Set A/D encoding result=40 04:09:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:21 Set channel filter=0.000000e+000 result=40 04:09:21 Config A/D Result=40 04:09:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:21 Get A/D filter: -9.255963e+061 result=40 04:09:21 Get A/D value=-858993460 result=40 04:09:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:21 Parameters OK 04:09:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:21 Set A/D data flow result=40 04:09:21 Set A/D channel type result=40 04:09:21 Set A/D encoding result=40 04:09:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:21 Set channel filter=0.000000e+000 result=40 04:09:21 Config A/D Result=40 04:09:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:21 Get A/D filter: -9.255963e+061 result=40 04:09:21 Get A/D value=-858993460 result=40 04:09:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:21 Aux= 04:09:21 Message to Camera, serial 130413 queued 04:09:58 Received message from Master: op=PointingHead serial=130426 04:09:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:09:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:09:58 Point started: ret=0 04:09:58 point_skyscan result=0 04:09:59 Check angles 04:09:59 SkyScan query 04:10:00 SkyScan query done: ret=0 az=134.835<-8989 ze=36.57<-9562 Statuses=0009 0009 04:10:00 Msec=0 True Az=134.835 Ze=36.57 Az status=0009 Ze status=0009 04:10:00 Check angles 04:10:00 SkyScan query 04:10:01 SkyScan query done: ret=0 az=117<-7800 ze=15.195<-10987 Statuses=0009 0009 04:10:01 Msec=750 True Az=117 Ze=15.195 Az status=0009 Ze status=0009 04:10:01 Check angles 04:10:01 SkyScan query 04:10:01 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.76<-12384 Statuses=0009 0009 04:10:01 Msec=1500 True Az=99.66 Ze=-5.76 Az status=0009 Ze status=0009 04:10:01 Check angles 04:10:01 SkyScan query 04:10:02 SkyScan query done: ret=0 az=82.17<-5478 ze=-26.73<-13782 Statuses=0009 0009 04:10:02 Msec=2250 True Az=82.17 Ze=-26.73 Az status=0009 Ze status=0009 04:10:02 Check angles 04:10:02 SkyScan query 04:10:03 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.565<-14571 Statuses=0009 0008 04:10:03 Msec=3000 True Az=64.68 Ze=-38.565 Az status=0009 Ze status=0008 04:10:03 Check angles 04:10:03 SkyScan query 04:10:04 SkyScan query done: ret=0 az=47.22<-3148 ze=-38.52<-14568 Statuses=0009 0008 04:10:04 Msec=3750 True Az=47.22 Ze=-38.52 Az status=0009 Ze status=0008 04:10:04 Check angles 04:10:04 SkyScan query 04:10:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:10:04 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:10:04 Message to Master queued w/err=0: serial=130426 error=0 04:10:09 Received message from Master: op=Filter serial=130427 04:10:09 Color wheel filter change from 0 to 0 04:10:09 FLIGetFilterPos err=0 currentPosition=0 04:10:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:09 Filter is already there-color wheel unchanged 04:10:09 Received message from Master: op=Shutter serial=130428 04:10:09 Shutter LASER close 04:10:09 Received message from Camera: op=State serial=130430 04:10:09 GetSingleValue result=40 Value=cccccccc 04:10:09 SkyScan query 04:10:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:10:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:10 Parameters OK 04:10:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:10 Set A/D data flow result=40 04:10:10 Set A/D channel type result=40 04:10:10 Set A/D encoding result=40 04:10:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:10 Set channel filter=0.000000e+000 result=40 04:10:10 Config A/D Result=40 04:10:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:10 Get A/D filter: -9.255963e+061 result=40 04:10:10 Get A/D value=-858993460 result=40 04:10:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:10 Parameters OK 04:10:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:10 Set A/D data flow result=40 04:10:10 Set A/D channel type result=40 04:10:10 Set A/D encoding result=40 04:10:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:10 Set channel filter=0.000000e+000 result=40 04:10:10 Config A/D Result=40 04:10:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:10 Get A/D filter: -9.255963e+061 result=40 04:10:10 Get A/D value=-858993460 result=40 04:10:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:10 Aux= 04:10:10 Message to Camera, serial 130430 queued 04:10:47 Received message from Master: op=PointingHead serial=130443 04:10:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:10:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:10:47 Point started: ret=0 04:10:47 point_skyscan result=0 04:10:48 Check angles 04:10:48 SkyScan query 04:10:49 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.325<-16555 Statuses=0009 0009 04:10:49 Msec=0 True Az=64.005 Ze=-68.325 Az status=0009 Ze status=0009 04:10:49 Check angles 04:10:49 SkyScan query 04:10:49 SkyScan query done: ret=0 az=81.915<-5461 ze=-89.76<-17984 Statuses=0009 0009 04:10:49 Msec=750 True Az=81.915 Ze=-89.76 Az status=0009 Ze status=0009 04:10:50 Check angles 04:10:50 SkyScan query 04:10:50 SkyScan query done: ret=0 az=99.705<-6647 ze=-111.12<-19408 Statuses=0009 0009 04:10:50 Msec=1500 True Az=99.705 Ze=-111.12 Az status=0009 Ze status=0009 04:10:50 Check angles 04:10:50 SkyScan query 04:10:51 SkyScan query done: ret=0 az=117.24<-7816 ze=-132.045<-20803 Statuses=0009 0009 04:10:51 Msec=2250 True Az=117.24 Ze=-132.045 Az status=0009 Ze status=0009 04:10:51 Check angles 04:10:51 SkyScan query 04:10:52 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 04:10:52 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 04:10:52 Check angles 04:10:52 SkyScan query 04:10:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:10:52 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:10:52 Message to Master queued w/err=0: serial=130443 error=0 04:10:57 Received message from Master: op=Filter serial=130444 04:10:57 Color wheel filter change from 0 to 0 04:10:57 FLIGetFilterPos err=0 currentPosition=0 04:10:57 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:57 Filter is already there-color wheel unchanged 04:10:58 Received message from Master: op=Shutter serial=130445 04:10:58 Shutter LASER close 04:10:58 Received message from Camera: op=State serial=130447 04:10:58 GetSingleValue result=40 Value=cccccccc 04:10:58 SkyScan query 04:10:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:10:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:58 Parameters OK 04:10:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:58 Set A/D data flow result=40 04:10:58 Set A/D channel type result=40 04:10:58 Set A/D encoding result=40 04:10:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:58 Set channel filter=0.000000e+000 result=40 04:10:58 Config A/D Result=40 04:10:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:58 Get A/D filter: -9.255963e+061 result=40 04:10:58 Get A/D value=-858993460 result=40 04:10:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:58 Parameters OK 04:10:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:58 Set A/D data flow result=40 04:10:58 Set A/D channel type result=40 04:10:58 Set A/D encoding result=40 04:10:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:58 Set channel filter=0.000000e+000 result=40 04:10:58 Config A/D Result=40 04:10:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:58 Get A/D filter: -9.255963e+061 result=40 04:10:58 Get A/D value=-858993460 result=40 04:10:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:58 Aux= 04:10:58 Message to Camera, serial 130447 queued 04:11:35 Received message from Master: op=PointingHead serial=130460 04:11:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:11:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:11:35 Point started: ret=0 04:11:35 point_skyscan result=0 04:11:36 Check angles 04:11:36 SkyScan query 04:11:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 04:11:37 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 04:11:37 Check angles 04:11:37 SkyScan query 04:11:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:11:37 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:11:37 Message to Master queued w/err=0: serial=130460 error=0 04:11:42 Received message from Master: op=Filter serial=130461 04:11:42 Color wheel filter change from 0 to 0 04:11:42 FLIGetFilterPos err=0 currentPosition=0 04:11:42 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:42 Filter is already there-color wheel unchanged 04:11:43 Received message from Master: op=Shutter serial=130462 04:11:43 Shutter LASER open 04:11:43 Received message from Camera: op=State serial=130464 04:11:43 GetSingleValue result=40 Value=cccccccc 04:11:43 SkyScan query 04:11:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:11:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:43 Parameters OK 04:11:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:43 Set A/D data flow result=40 04:11:43 Set A/D channel type result=40 04:11:43 Set A/D encoding result=40 04:11:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:43 Set channel filter=0.000000e+000 result=40 04:11:43 Config A/D Result=40 04:11:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:43 Get A/D filter: -9.255963e+061 result=40 04:11:43 Get A/D value=-858993460 result=40 04:11:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:43 Parameters OK 04:11:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:43 Set A/D data flow result=40 04:11:43 Set A/D channel type result=40 04:11:43 Set A/D encoding result=40 04:11:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:43 Set channel filter=0.000000e+000 result=40 04:11:43 Config A/D Result=40 04:11:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:43 Get A/D filter: -9.255963e+061 result=40 04:11:43 Get A/D value=-858993460 result=40 04:11:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:43 Aux= 04:11:43 Message to Camera, serial 130464 queued 04:11:52 Received message from Master: op=Shutter serial=130474 04:11:52 Shutter LASER close 04:11:52 Received message from Master: op=PointingHead serial=130478 04:11:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:11:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:11:53 Point started: ret=0 04:11:53 point_skyscan result=0 04:11:54 Check angles 04:11:54 SkyScan query 04:11:54 SkyScan query done: ret=0 az=136.5<-9100 ze=-142.695<-21513 Statuses=0009 0009 04:11:54 Msec=0 True Az=136.5 Ze=-142.695 Az status=0009 Ze status=0009 04:11:54 Check angles 04:11:54 SkyScan query 04:11:55 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.74<-20116 Statuses=0009 0009 04:11:55 Msec=750 True Az=153.9 Ze=-121.74 Az status=0009 Ze status=0009 04:11:55 Check angles 04:11:55 SkyScan query 04:11:56 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.74<-18716 Statuses=0009 0009 04:11:56 Msec=1500 True Az=171.45 Ze=-100.74 Az status=0009 Ze status=0009 04:11:56 Check angles 04:11:56 SkyScan query 04:11:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.38<-17292 Statuses=0008 0009 04:11:56 Msec=2250 True Az=176.01 Ze=-79.38 Az status=0008 Ze status=0009 04:11:57 Check angles 04:11:57 SkyScan query 04:11:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.395<-15893 Statuses=0008 0009 04:11:57 Msec=3000 True Az=176.01 Ze=-58.395 Az status=0008 Ze status=0009 04:11:57 Check angles 04:11:57 SkyScan query 04:11:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 04:11:58 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 04:11:58 Message to Master queued w/err=0: serial=130478 error=0 04:12:03 Received message from Master: op=Filter serial=130479 04:12:03 Color wheel filter change from 0 to 0 04:12:03 FLIGetFilterPos err=0 currentPosition=0 04:12:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:03 Filter is already there-color wheel unchanged 04:12:03 Received message from Master: op=Shutter serial=130480 04:12:03 Shutter LASER close 04:12:03 Received message from Camera: op=State serial=130482 04:12:03 GetSingleValue result=40 Value=cccccccc 04:12:03 SkyScan query 04:12:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:12:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:04 Parameters OK 04:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:04 Set A/D data flow result=40 04:12:04 Set A/D channel type result=40 04:12:04 Set A/D encoding result=40 04:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:04 Set channel filter=0.000000e+000 result=40 04:12:04 Config A/D Result=40 04:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:04 Get A/D filter: -9.255963e+061 result=40 04:12:04 Get A/D value=-858993460 result=40 04:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:04 Parameters OK 04:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:04 Set A/D data flow result=40 04:12:04 Set A/D channel type result=40 04:12:04 Set A/D encoding result=40 04:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:04 Set channel filter=0.000000e+000 result=40 04:12:04 Config A/D Result=40 04:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:04 Get A/D filter: -9.255963e+061 result=40 04:12:04 Get A/D value=-858993460 result=40 04:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:04 Aux= 04:12:04 Message to Camera, serial 130482 queued 04:12:41 Received message from Master: op=PointingHead serial=130495 04:12:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:12:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:12:41 Point started: ret=0 04:12:41 point_skyscan result=0 04:12:42 Check angles 04:12:42 SkyScan query 04:12:42 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.99<-13466 Statuses=0009 0009 04:12:42 Msec=0 True Az=153.18 Ze=-21.99 Az status=0009 Ze status=0009 04:12:43 Check angles 04:12:43 SkyScan query 04:12:43 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.975<-12065 Statuses=0009 0009 04:12:43 Msec=750 True Az=135.735 Ze=-0.975 Az status=0009 Ze status=0009 04:12:43 Check angles 04:12:43 SkyScan query 04:12:44 SkyScan query done: ret=0 az=118.245<-7883 ze=19.965<-10669 Statuses=0009 0009 04:12:44 Msec=1500 True Az=118.245 Ze=19.965 Az status=0009 Ze status=0009 04:12:44 Check angles 04:12:44 SkyScan query 04:12:45 SkyScan query done: ret=0 az=100.785<-6719 ze=40.905<-9273 Statuses=0009 0009 04:12:45 Msec=2250 True Az=100.785 Ze=40.905 Az status=0009 Ze status=0009 04:12:45 Check angles 04:12:45 SkyScan query 04:12:45 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 04:12:45 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 04:12:46 Check angles 04:12:46 SkyScan query 04:12:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:12:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:12:46 Message to Master queued w/err=0: serial=130495 error=0 04:12:51 Received message from Master: op=Filter serial=130496 04:12:51 Color wheel filter change from 0 to 0 04:12:51 FLIGetFilterPos err=0 currentPosition=0 04:12:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:51 Filter is already there-color wheel unchanged 04:12:51 Received message from Master: op=Shutter serial=130497 04:12:51 Shutter LASER close 04:12:51 Received message from Camera: op=State serial=130499 04:12:51 GetSingleValue result=40 Value=cccccccc 04:12:51 SkyScan query 04:12:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:12:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:52 Parameters OK 04:12:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:52 Set A/D data flow result=40 04:12:52 Set A/D channel type result=40 04:12:52 Set A/D encoding result=40 04:12:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:52 Set channel filter=0.000000e+000 result=40 04:12:52 Config A/D Result=40 04:12:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:52 Get A/D filter: -9.255963e+061 result=40 04:12:52 Get A/D value=-858993460 result=40 04:12:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:52 Parameters OK 04:12:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:52 Set A/D data flow result=40 04:12:52 Set A/D channel type result=40 04:12:52 Set A/D encoding result=40 04:12:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:52 Set channel filter=0.000000e+000 result=40 04:12:52 Config A/D Result=40 04:12:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:52 Get A/D filter: -9.255963e+061 result=40 04:12:52 Get A/D value=-858993460 result=40 04:12:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:52 Aux= 04:12:52 Message to Camera, serial 130499 queued 04:13:29 Received message from Master: op=PointingHead serial=130512 04:13:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:13:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:13:29 Point started: ret=0 04:13:29 point_skyscan result=0 04:13:30 Check angles 04:13:30 SkyScan query 04:13:31 SkyScan query done: ret=0 az=85.995<-5733 ze=21.705<-10553 Statuses=0008 0009 04:13:31 Msec=0 True Az=85.995 Ze=21.705 Az status=0008 Ze status=0009 04:13:31 Check angles 04:13:31 SkyScan query 04:13:31 SkyScan query done: ret=0 az=85.995<-5733 ze=0.3<-11980 Statuses=0008 0009 04:13:31 Msec=750 True Az=85.995 Ze=0.3 Az status=0008 Ze status=0009 04:13:31 Check angles 04:13:31 SkyScan query 04:13:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.09<-13406 Statuses=0008 0009 04:13:32 Msec=1500 True Az=85.995 Ze=-21.09 Az status=0008 Ze status=0009 04:13:32 Check angles 04:13:32 SkyScan query 04:13:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.075<-14805 Statuses=0008 0009 04:13:33 Msec=2250 True Az=85.995 Ze=-42.075 Az status=0008 Ze status=0009 04:13:33 Check angles 04:13:33 SkyScan query 04:13:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 04:13:34 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 04:13:34 Message to Master queued w/err=0: serial=130512 error=0 04:13:39 Received message from Master: op=Filter serial=130513 04:13:39 Color wheel filter change from 0 to 0 04:13:39 FLIGetFilterPos err=0 currentPosition=0 04:13:39 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:39 Filter is already there-color wheel unchanged 04:13:39 Received message from Master: op=Shutter serial=130514 04:13:39 Shutter LASER close 04:13:39 Received message from Camera: op=State serial=130516 04:13:39 GetSingleValue result=40 Value=cccccccc 04:13:39 SkyScan query 04:13:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:13:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:39 Parameters OK 04:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:39 Set A/D data flow result=40 04:13:39 Set A/D channel type result=40 04:13:39 Set A/D encoding result=40 04:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:39 Set channel filter=0.000000e+000 result=40 04:13:39 Config A/D Result=40 04:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:39 Get A/D filter: -9.255963e+061 result=40 04:13:39 Get A/D value=-858993460 result=40 04:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:39 Parameters OK 04:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:39 Set A/D data flow result=40 04:13:39 Set A/D channel type result=40 04:13:39 Set A/D encoding result=40 04:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:39 Set channel filter=0.000000e+000 result=40 04:13:39 Config A/D Result=40 04:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:39 Get A/D filter: -9.255963e+061 result=40 04:13:39 Get A/D value=-858993460 result=40 04:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:39 Aux= 04:13:39 Message to Camera, serial 130516 queued 04:14:16 Received message from Master: op=PointingHead serial=130529 04:14:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:14:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:14:17 Point started: ret=0 04:14:17 point_skyscan result=0 04:14:17 Check angles 04:14:17 SkyScan query 04:14:18 SkyScan query done: ret=0 az=109.23<-7282 ze=-81.555<-17437 Statuses=0009 0009 04:14:18 Msec=0 True Az=109.23 Ze=-81.555 Az status=0009 Ze status=0009 04:14:18 Check angles 04:14:18 SkyScan query 04:14:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.915<-18861 Statuses=0008 0009 04:14:19 Msec=750 True Az=112.995 Ze=-102.915 Az status=0008 Ze status=0009 04:14:19 Check angles 04:14:19 SkyScan query 04:14:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 04:14:19 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 04:14:20 Check angles 04:14:20 SkyScan query 04:14:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.795<-21653 Statuses=0008 0009 04:14:20 Msec=2250 True Az=112.995 Ze=-144.795 Az status=0008 Ze status=0009 04:14:20 Check angles 04:14:20 SkyScan query 04:14:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 04:14:21 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 04:14:21 Check angles 04:14:21 SkyScan query 04:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:14:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:14:22 Message to Master queued w/err=0: serial=130529 error=0 04:14:27 Received message from Master: op=Filter serial=130530 04:14:27 Color wheel filter change from 0 to 0 04:14:27 FLIGetFilterPos err=0 currentPosition=0 04:14:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:27 Filter is already there-color wheel unchanged 04:14:27 Received message from Master: op=Shutter serial=130531 04:14:27 Shutter LASER open 04:14:27 Received message from Camera: op=State serial=130533 04:14:27 GetSingleValue result=40 Value=cccccccc 04:14:27 SkyScan query 04:14:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:14:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:28 Parameters OK 04:14:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:28 Set A/D data flow result=40 04:14:28 Set A/D channel type result=40 04:14:28 Set A/D encoding result=40 04:14:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:28 Set channel filter=0.000000e+000 result=40 04:14:28 Config A/D Result=40 04:14:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:28 Get A/D filter: -9.255963e+061 result=40 04:14:28 Get A/D value=-858993460 result=40 04:14:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:28 Parameters OK 04:14:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:28 Set A/D data flow result=40 04:14:28 Set A/D channel type result=40 04:14:28 Set A/D encoding result=40 04:14:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:28 Set channel filter=0.000000e+000 result=40 04:14:28 Config A/D Result=40 04:14:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:28 Get A/D filter: -9.255963e+061 result=40 04:14:28 Get A/D value=-858993460 result=40 04:14:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:28 Aux= 04:14:28 Message to Camera, serial 130533 queued 04:14:36 Received message from Master: op=Shutter serial=130543 04:14:36 Shutter LASER close 04:14:36 Received message from Master: op=PointingHead serial=130547 04:14:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:14:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:14:37 Point started: ret=0 04:14:37 point_skyscan result=0 04:14:38 Check angles 04:14:38 SkyScan query 04:14:38 SkyScan query done: ret=0 az=89.415<-5961 ze=156.78<-1548 Statuses=0009 0009 04:14:38 Msec=0 True Az=89.415 Ze=156.78 Az status=0009 Ze status=0009 04:14:38 Check angles 04:14:38 SkyScan query 04:14:39 SkyScan query done: ret=0 az=71.925<-4795 ze=135.825<-2945 Statuses=0009 0009 04:14:39 Msec=750 True Az=71.925 Ze=135.825 Az status=0009 Ze status=0009 04:14:39 Check angles 04:14:39 SkyScan query 04:14:40 SkyScan query done: ret=0 az=54.57<-3638 ze=114.84<-4344 Statuses=0009 0009 04:14:40 Msec=1500 True Az=54.57 Ze=114.84 Az status=0009 Ze status=0009 04:14:40 Check angles 04:14:40 SkyScan query 04:14:40 SkyScan query done: ret=0 az=41.025<-2735 ze=93.9<-5740 Statuses=0009 0009 04:14:40 Msec=2250 True Az=41.025 Ze=93.9 Az status=0009 Ze status=0009 04:14:41 Check angles 04:14:41 SkyScan query 04:14:41 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 04:14:41 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 04:14:41 Check angles 04:14:41 SkyScan query 04:14:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 04:14:42 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 04:14:42 Check angles 04:14:42 SkyScan query 04:14:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:14:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:14:43 Message to Master queued w/err=0: serial=130547 error=0 04:14:48 Received message from Master: op=Filter serial=130548 04:14:48 Color wheel filter change from 0 to 0 04:14:48 FLIGetFilterPos err=0 currentPosition=0 04:14:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:48 Filter is already there-color wheel unchanged 04:14:48 Received message from Master: op=Shutter serial=130549 04:14:48 Shutter LASER close 04:14:48 Received message from Camera: op=State serial=130551 04:14:48 GetSingleValue result=40 Value=cccccccc 04:14:48 SkyScan query 04:14:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:14:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:49 Parameters OK 04:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:49 Set A/D data flow result=40 04:14:49 Set A/D channel type result=40 04:14:49 Set A/D encoding result=40 04:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:49 Set channel filter=0.000000e+000 result=40 04:14:49 Config A/D Result=40 04:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:49 Get A/D filter: -9.255963e+061 result=40 04:14:49 Get A/D value=-858993460 result=40 04:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:49 Parameters OK 04:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:49 Set A/D data flow result=40 04:14:49 Set A/D channel type result=40 04:14:49 Set A/D encoding result=40 04:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:49 Set channel filter=0.000000e+000 result=40 04:14:49 Config A/D Result=40 04:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:49 Get A/D filter: -9.255963e+061 result=40 04:14:49 Get A/D value=-858993460 result=40 04:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:49 Aux= 04:14:49 Message to Camera, serial 130551 queued 04:15:25 Received message from Master: op=PointingHead serial=130564 04:15:25 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:15:25 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:15:26 Point started: ret=0 04:15:26 point_skyscan result=0 04:15:26 Check angles 04:15:26 SkyScan query 04:15:27 SkyScan query done: ret=0 az=63.87<-4258 ze=66.555<-7563 Statuses=0009 0008 04:15:27 Msec=0 True Az=63.87 Ze=66.555 Az status=0009 Ze status=0008 04:15:27 Received message from Master: op=Identify serial=130565 04:15:27 Check angles 04:15:27 SkyScan query 04:15:28 SkyScan query done: ret=0 az=81.315<-5421 ze=66.51<-7566 Statuses=0009 0008 04:15:28 Msec=750 True Az=81.315 Ze=66.51 Az status=0009 Ze status=0008 04:15:28 Check angles 04:15:28 SkyScan query 04:15:29 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 04:15:29 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 04:15:29 Check angles 04:15:29 SkyScan query 04:15:29 SkyScan query done: ret=0 az=116.715<-7781 ze=66.495<-7567 Statuses=0009 0008 04:15:29 Msec=2250 True Az=116.715 Ze=66.495 Az status=0009 Ze status=0008 04:15:29 Check angles 04:15:29 SkyScan query 04:15:30 SkyScan query done: ret=0 az=134.22<-8948 ze=66.495<-7567 Statuses=0009 0008 04:15:30 Msec=3000 True Az=134.22 Ze=66.495 Az status=0009 Ze status=0008 04:15:30 Check angles 04:15:30 SkyScan query 04:15:31 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 04:15:31 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 04:15:31 Check angles 04:15:31 SkyScan query 04:15:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:15:32 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:15:32 Message to Master queued w/err=0: serial=130564 error=0 04:15:37 Received message from Master: op=Filter serial=130568 04:15:37 Color wheel filter change from 0 to 0 04:15:37 FLIGetFilterPos err=0 currentPosition=0 04:15:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:37 Filter is already there-color wheel unchanged 04:15:37 Received message from Master: op=Shutter serial=130569 04:15:37 Shutter LASER close 04:15:37 Received message from Camera: op=State serial=130571 04:15:37 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-14 04:15:37] 04:15:37 SkyScan query 04:15:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:15:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:37 Parameters OK 04:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:37 Set A/D data flow result=40 04:15:37 Set A/D channel type result=40 04:15:37 Set A/D encoding result=40 04:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:37 Set channel filter=0.000000e+000 result=40 04:15:37 Config A/D Result=40 04:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:37 Get A/D filter: -9.255963e+061 result=40 04:15:37 Get A/D value=-858993460 result=40 04:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:37 Parameters OK 04:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:37 Set A/D data flow result=40 04:15:37 Set A/D channel type result=40 04:15:37 Set A/D encoding result=40 04:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:37 Set channel filter=0.000000e+000 result=40 04:15:37 Config A/D Result=40 04:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:37 Get A/D filter: -9.255963e+061 result=40 04:15:37 Get A/D value=-858993460 result=40 04:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:37 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:37 Aux= 04:15:37 Message to Camera, serial 130571 queued [UTC 2018-12-14 04:15:52] 04:16:14 Received message from Master: op=PointingHead serial=130584 04:16:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:16:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:16:15 Point started: ret=0 04:16:15 point_skyscan result=0 04:16:15 Check angles 04:16:15 SkyScan query 04:16:16 SkyScan query done: ret=0 az=134.94<-8996 ze=36.72<-9552 Statuses=0009 0009 04:16:16 Msec=0 True Az=134.94 Ze=36.72 Az status=0009 Ze status=0009 04:16:16 Check angles 04:16:16 SkyScan query 04:16:17 SkyScan query done: ret=0 az=117.09<-7806 ze=15.345<-10977 Statuses=0009 0009 04:16:17 Msec=750 True Az=117.09 Ze=15.345 Az status=0009 Ze status=0009 04:16:17 Check angles 04:16:17 SkyScan query 04:16:17 SkyScan query done: ret=0 az=99.36<-6624 ze=-6.105<-12407 Statuses=0009 0009 04:16:17 Msec=1500 True Az=99.36 Ze=-6.105 Az status=0009 Ze status=0009 04:16:18 Check angles 04:16:18 SkyScan query 04:16:18 SkyScan query done: ret=0 az=81.915<-5461 ze=-27.045<-13803 Statuses=0009 0009 04:16:18 Msec=2250 True Az=81.915 Ze=-27.045 Az status=0009 Ze status=0009 04:16:18 Check angles 04:16:18 SkyScan query 04:16:19 SkyScan query done: ret=0 az=64.005<-4267 ze=-38.58<-14572 Statuses=0009 0008 04:16:19 Msec=3000 True Az=64.005 Ze=-38.58 Az status=0009 Ze status=0008 04:16:19 Check angles 04:16:19 SkyScan query 04:16:20 SkyScan query done: ret=0 az=46.575<-3105 ze=-38.52<-14568 Statuses=0009 0008 04:16:20 Msec=3750 True Az=46.575 Ze=-38.52 Az status=0009 Ze status=0008 04:16:20 Check angles 04:16:20 SkyScan query 04:16:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:16:20 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:16:20 Message to Master queued w/err=0: serial=130584 error=0 04:16:25 Received message from Master: op=Filter serial=130585 04:16:25 Color wheel filter change from 0 to 0 04:16:25 FLIGetFilterPos err=0 currentPosition=0 04:16:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:25 Filter is already there-color wheel unchanged 04:16:26 Received message from Master: op=Shutter serial=130586 04:16:26 Shutter LASER close 04:16:26 Received message from Camera: op=State serial=130588 04:16:26 GetSingleValue result=40 Value=cccccccc 04:16:26 SkyScan query 04:16:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:16:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:26 Parameters OK 04:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:26 Set A/D data flow result=40 04:16:26 Set A/D channel type result=40 04:16:26 Set A/D encoding result=40 04:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:26 Set channel filter=0.000000e+000 result=40 04:16:26 Config A/D Result=40 04:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:26 Get A/D filter: -9.255963e+061 result=40 04:16:26 Get A/D value=-858993460 result=40 04:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:26 Parameters OK 04:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:26 Set A/D data flow result=40 04:16:26 Set A/D channel type result=40 04:16:26 Set A/D encoding result=40 04:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:26 Set channel filter=0.000000e+000 result=40 04:16:26 Config A/D Result=40 04:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:26 Get A/D filter: -9.255963e+061 result=40 04:16:26 Get A/D value=-858993460 result=40 04:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:26 Aux= 04:16:26 Message to Camera, serial 130588 queued 04:17:03 Received message from Master: op=PointingHead serial=130601 04:17:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:17:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:17:04 Point started: ret=0 04:17:04 point_skyscan result=0 04:17:04 Check angles 04:17:04 SkyScan query 04:17:05 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.835<-16589 Statuses=0009 0009 04:17:05 Msec=0 True Az=64.425 Ze=-68.835 Az status=0009 Ze status=0009 04:17:05 Check angles 04:17:05 SkyScan query 04:17:06 SkyScan query done: ret=0 az=81.87<-5458 ze=-89.805<-17987 Statuses=0009 0009 04:17:06 Msec=750 True Az=81.87 Ze=-89.805 Az status=0009 Ze status=0009 04:17:06 Check angles 04:17:06 SkyScan query 04:17:06 SkyScan query done: ret=0 az=99.285<-6619 ze=-110.76<-19384 Statuses=0009 0009 04:17:06 Msec=1500 True Az=99.285 Ze=-110.76 Az status=0009 Ze status=0009 04:17:07 Check angles 04:17:07 SkyScan query 04:17:07 SkyScan query done: ret=0 az=116.79<-7786 ze=-131.7<-20780 Statuses=0009 0009 04:17:07 Msec=2250 True Az=116.79 Ze=-131.7 Az status=0009 Ze status=0009 04:17:07 Check angles 04:17:07 SkyScan query 04:17:08 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 04:17:08 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 04:17:08 Check angles 04:17:08 SkyScan query 04:17:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:17:09 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:17:09 Message to Master queued w/err=0: serial=130601 error=0 04:17:14 Received message from Master: op=Filter serial=130602 04:17:14 Color wheel filter change from 0 to 0 04:17:14 FLIGetFilterPos err=0 currentPosition=0 04:17:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:14 Filter is already there-color wheel unchanged 04:17:14 Received message from Master: op=Shutter serial=130603 04:17:14 Shutter LASER close 04:17:14 Received message from Camera: op=State serial=130605 04:17:14 GetSingleValue result=40 Value=cccccccc 04:17:14 SkyScan query 04:17:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:17:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:14 Parameters OK 04:17:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:14 Set A/D data flow result=40 04:17:14 Set A/D channel type result=40 04:17:14 Set A/D encoding result=40 04:17:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:14 Set channel filter=0.000000e+000 result=40 04:17:14 Config A/D Result=40 04:17:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:14 Get A/D filter: -9.255963e+061 result=40 04:17:14 Get A/D value=-858993460 result=40 04:17:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:14 Parameters OK 04:17:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:14 Set A/D data flow result=40 04:17:14 Set A/D channel type result=40 04:17:14 Set A/D encoding result=40 04:17:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:14 Set channel filter=0.000000e+000 result=40 04:17:14 Config A/D Result=40 04:17:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:14 Get A/D filter: -9.255963e+061 result=40 04:17:14 Get A/D value=-858993460 result=40 04:17:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:14 Aux= 04:17:14 Message to Camera, serial 130605 queued 04:17:51 Received message from Master: op=PointingHead serial=130618 04:17:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:17:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:17:52 Point started: ret=0 04:17:52 point_skyscan result=0 04:17:52 Check angles 04:17:52 SkyScan query 04:17:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 04:17:53 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 04:17:53 Check angles 04:17:53 SkyScan query 04:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:17:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:17:54 Message to Master queued w/err=0: serial=130618 error=0 04:17:59 Received message from Master: op=Filter serial=130619 04:17:59 Color wheel filter change from 0 to 0 04:17:59 FLIGetFilterPos err=0 currentPosition=0 04:17:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:59 Filter is already there-color wheel unchanged 04:17:59 Received message from Master: op=Shutter serial=130620 04:17:59 Shutter LASER open 04:17:59 Received message from Camera: op=State serial=130622 04:17:59 GetSingleValue result=40 Value=cccccccc 04:17:59 SkyScan query 04:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:18:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:00 Parameters OK 04:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:00 Set A/D data flow result=40 04:18:00 Set A/D channel type result=40 04:18:00 Set A/D encoding result=40 04:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:00 Set channel filter=0.000000e+000 result=40 04:18:00 Config A/D Result=40 04:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:00 Get A/D filter: -9.255963e+061 result=40 04:18:00 Get A/D value=-858993460 result=40 04:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:00 Parameters OK 04:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:00 Set A/D data flow result=40 04:18:00 Set A/D channel type result=40 04:18:00 Set A/D encoding result=40 04:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:00 Set channel filter=0.000000e+000 result=40 04:18:00 Config A/D Result=40 04:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:00 Get A/D filter: -9.255963e+061 result=40 04:18:00 Get A/D value=-858993460 result=40 04:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:00 Aux= 04:18:00 Message to Camera, serial 130622 queued 04:18:08 Received message from Master: op=Shutter serial=130632 04:18:08 Shutter LASER close 04:18:09 Received message from Master: op=PointingHead serial=130636 04:18:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:18:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:18:09 Point started: ret=0 04:18:09 point_skyscan result=0 04:18:10 Check angles 04:18:10 SkyScan query 04:18:10 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.49<-21566 Statuses=0009 0009 04:18:10 Msec=0 True Az=135.825 Ze=-143.49 Az status=0009 Ze status=0009 04:18:10 Check angles 04:18:10 SkyScan query 04:18:11 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.07<-20138 Statuses=0009 0009 04:18:11 Msec=750 True Az=153.63 Ze=-122.07 Az status=0009 Ze status=0009 04:18:11 Check angles 04:18:11 SkyScan query 04:18:12 SkyScan query done: ret=0 az=171.255<-11417 ze=-101.145<-18743 Statuses=0009 0009 04:18:12 Msec=1500 True Az=171.255 Ze=-101.145 Az status=0009 Ze status=0009 04:18:12 Check angles 04:18:12 SkyScan query 04:18:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.22<-17348 Statuses=0008 0009 04:18:12 Msec=2250 True Az=176.01 Ze=-80.22 Az status=0008 Ze status=0009 04:18:13 Check angles 04:18:13 SkyScan query 04:18:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.755<-15917 Statuses=0008 0009 04:18:13 Msec=3000 True Az=176.01 Ze=-58.755 Az status=0008 Ze status=0009 04:18:13 Check angles 04:18:13 SkyScan query 04:18:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:18:14 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:18:14 Message to Master queued w/err=0: serial=130636 error=0 04:18:19 Received message from Master: op=Filter serial=130637 04:18:19 Color wheel filter change from 0 to 0 04:18:19 FLIGetFilterPos err=0 currentPosition=0 04:18:19 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:19 Filter is already there-color wheel unchanged 04:18:19 Received message from Master: op=Shutter serial=130638 04:18:19 Shutter LASER close 04:18:19 Received message from Camera: op=State serial=130640 04:18:19 GetSingleValue result=40 Value=cccccccc 04:18:19 SkyScan query 04:18:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:18:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:20 Parameters OK 04:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:20 Set A/D data flow result=40 04:18:20 Set A/D channel type result=40 04:18:20 Set A/D encoding result=40 04:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:20 Set channel filter=0.000000e+000 result=40 04:18:20 Config A/D Result=40 04:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:20 Get A/D filter: -9.255963e+061 result=40 04:18:20 Get A/D value=-858993460 result=40 04:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:20 Parameters OK 04:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:20 Set A/D data flow result=40 04:18:20 Set A/D channel type result=40 04:18:20 Set A/D encoding result=40 04:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:20 Set channel filter=0.000000e+000 result=40 04:18:20 Config A/D Result=40 04:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:20 Get A/D filter: -9.255963e+061 result=40 04:18:20 Get A/D value=-858993460 result=40 04:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:20 Aux= 04:18:20 Message to Camera, serial 130640 queued 04:18:57 Received message from Master: op=PointingHead serial=130653 04:18:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:18:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:18:57 Point started: ret=0 04:18:57 point_skyscan result=0 04:18:58 Check angles 04:18:58 SkyScan query 04:18:58 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.51<-13434 Statuses=0009 0009 04:18:58 Msec=0 True Az=152.775 Ze=-21.51 Az status=0009 Ze status=0009 04:18:59 Check angles 04:18:59 SkyScan query 04:18:59 SkyScan query done: ret=0 az=134.88<-8992 ze=-0.09<-12006 Statuses=0009 0009 04:18:59 Msec=750 True Az=134.88 Ze=-0.09 Az status=0009 Ze status=0009 04:18:59 Check angles 04:18:59 SkyScan query 04:19:00 SkyScan query done: ret=0 az=117.405<-7827 ze=20.85<-10610 Statuses=0009 0009 04:19:00 Msec=1500 True Az=117.405 Ze=20.85 Az status=0009 Ze status=0009 04:19:00 Check angles 04:19:00 SkyScan query 04:19:01 SkyScan query done: ret=0 az=100.035<-6669 ze=41.82<-9212 Statuses=0009 0009 04:19:01 Msec=2250 True Az=100.035 Ze=41.82 Az status=0009 Ze status=0009 04:19:01 Check angles 04:19:01 SkyScan query 04:19:01 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 04:19:01 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 04:19:02 Check angles 04:19:02 SkyScan query 04:19:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:19:02 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:19:02 Message to Master queued w/err=0: serial=130653 error=0 04:19:07 Received message from Master: op=Filter serial=130654 04:19:07 Color wheel filter change from 0 to 0 04:19:07 FLIGetFilterPos err=0 currentPosition=0 04:19:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:07 Filter is already there-color wheel unchanged 04:19:07 Received message from Master: op=Shutter serial=130655 04:19:07 Shutter LASER close 04:19:07 Received message from Camera: op=State serial=130657 04:19:07 GetSingleValue result=40 Value=cccccccc 04:19:07 SkyScan query 04:19:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:19:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:08 Parameters OK 04:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:08 Set A/D data flow result=40 04:19:08 Set A/D channel type result=40 04:19:08 Set A/D encoding result=40 04:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:08 Set channel filter=0.000000e+000 result=40 04:19:08 Config A/D Result=40 04:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:08 Get A/D filter: -9.255963e+061 result=40 04:19:08 Get A/D value=-858993460 result=40 04:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:08 Parameters OK 04:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:08 Set A/D data flow result=40 04:19:08 Set A/D channel type result=40 04:19:08 Set A/D encoding result=40 04:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:08 Set channel filter=0.000000e+000 result=40 04:19:08 Config A/D Result=40 04:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:08 Get A/D filter: -9.255963e+061 result=40 04:19:08 Get A/D value=-858993460 result=40 04:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:08 Aux= 04:19:08 Message to Camera, serial 130657 queued 04:19:45 Received message from Master: op=PointingHead serial=130670 04:19:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:19:45 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:19:45 Point started: ret=0 04:19:45 point_skyscan result=0 04:19:46 Check angles 04:19:46 SkyScan query 04:19:46 SkyScan query done: ret=0 az=108.72<-7248 ze=38.49<-9434 Statuses=0009 0008 04:19:46 Msec=0 True Az=108.72 Ze=38.49 Az status=0009 Ze status=0008 04:19:47 Check angles 04:19:47 SkyScan query 04:19:47 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 04:19:47 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 04:19:47 Check angles 04:19:47 SkyScan query 04:19:48 SkyScan query done: ret=0 az=143.82<-9588 ze=38.505<-9433 Statuses=0009 0008 04:19:48 Msec=1500 True Az=143.82 Ze=38.505 Az status=0009 Ze status=0008 04:19:48 Check angles 04:19:48 SkyScan query 04:19:49 SkyScan query done: ret=0 az=161.01<-10734 ze=38.505<-9433 Statuses=0009 0008 04:19:49 Msec=2250 True Az=161.01 Ze=38.505 Az status=0009 Ze status=0008 04:19:49 Check angles 04:19:49 SkyScan query 04:19:49 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:19:49 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:19:50 Check angles 04:19:50 SkyScan query 04:19:50 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:19:50 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:19:50 Message to Master queued w/err=0: serial=130670 error=0 04:19:55 Received message from Master: op=Filter serial=130671 04:19:55 Color wheel filter change from 0 to 0 04:19:55 FLIGetFilterPos err=0 currentPosition=0 04:19:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:55 Filter is already there-color wheel unchanged 04:19:55 Received message from Master: op=Shutter serial=130672 04:19:55 Shutter LASER close 04:19:55 Received message from Camera: op=State serial=130674 04:19:55 GetSingleValue result=40 Value=cccccccc 04:19:55 SkyScan query 04:19:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:19:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:56 Parameters OK 04:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:56 Set A/D data flow result=40 04:19:56 Set A/D channel type result=40 04:19:56 Set A/D encoding result=40 04:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:56 Set channel filter=0.000000e+000 result=40 04:19:56 Config A/D Result=40 04:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:56 Get A/D filter: -9.255963e+061 result=40 04:19:56 Get A/D value=-858993460 result=40 04:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:56 Parameters OK 04:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:56 Set A/D data flow result=40 04:19:56 Set A/D channel type result=40 04:19:56 Set A/D encoding result=40 04:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:56 Set channel filter=0.000000e+000 result=40 04:19:56 Config A/D Result=40 04:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:56 Get A/D filter: -9.255963e+061 result=40 04:19:56 Get A/D value=-858993460 result=40 04:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:56 Aux= 04:19:56 Message to Camera, serial 130674 queued 04:20:33 Received message from Master: op=PointingHead serial=130687 04:20:33 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:20:33 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:20:33 Point started: ret=0 04:20:33 point_skyscan result=0 04:20:34 Check angles 04:20:34 SkyScan query 04:20:35 SkyScan query done: ret=0 az=152.715<-10181 ze=8.265<-11449 Statuses=0009 0009 04:20:35 Msec=0 True Az=152.715 Ze=8.265 Az status=0009 Ze status=0009 04:20:35 Check angles 04:20:35 SkyScan query 04:20:35 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.66<-12844 Statuses=0009 0009 04:20:35 Msec=750 True Az=135.24 Ze=-12.66 Az status=0009 Ze status=0009 04:20:35 Check angles 04:20:35 SkyScan query 04:20:36 SkyScan query done: ret=0 az=117.735<-7849 ze=-33.63<-14242 Statuses=0009 0009 04:20:36 Msec=1500 True Az=117.735 Ze=-33.63 Az status=0009 Ze status=0009 04:20:36 Check angles 04:20:36 SkyScan query 04:20:37 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.555<-15437 Statuses=0009 0009 04:20:37 Msec=2250 True Az=100.365 Ze=-51.555 Az status=0009 Ze status=0009 04:20:37 Check angles 04:20:37 SkyScan query 04:20:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 04:20:38 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 04:20:38 Check angles 04:20:38 SkyScan query 04:20:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:20:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:20:38 Message to Master queued w/err=0: serial=130687 error=0 04:20:43 Received message from Master: op=Filter serial=130688 04:20:43 Color wheel filter change from 0 to 0 04:20:43 FLIGetFilterPos err=0 currentPosition=0 04:20:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:43 Filter is already there-color wheel unchanged 04:20:44 Received message from Master: op=Shutter serial=130689 04:20:44 Shutter LASER close 04:20:44 Received message from Camera: op=State serial=130691 04:20:44 GetSingleValue result=40 Value=cccccccc 04:20:44 SkyScan query 04:20:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:20:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:44 Parameters OK 04:20:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:44 Set A/D data flow result=40 04:20:44 Set A/D channel type result=40 04:20:44 Set A/D encoding result=40 04:20:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:44 Set channel filter=0.000000e+000 result=40 04:20:44 Config A/D Result=40 04:20:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:44 Get A/D filter: -9.255963e+061 result=40 04:20:44 Get A/D value=-858993460 result=40 04:20:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:44 Parameters OK 04:20:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:44 Set A/D data flow result=40 04:20:44 Set A/D channel type result=40 04:20:44 Set A/D encoding result=40 04:20:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:44 Set channel filter=0.000000e+000 result=40 04:20:44 Config A/D Result=40 04:20:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:44 Get A/D filter: -9.255963e+061 result=40 04:20:44 Get A/D value=-858993460 result=40 04:20:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:44 Aux= 04:20:44 Message to Camera, serial 130691 queued 04:21:20 Received message from Master: op=PointingHead serial=130703 04:21:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:21:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:21:20 Point started: ret=0 04:21:20 point_skyscan result=0 04:21:21 Check angles 04:21:21 SkyScan query 04:21:22 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.795<-17453 Statuses=0009 0009 04:21:22 Msec=0 True Az=109.335 Ze=-81.795 Az status=0009 Ze status=0009 04:21:22 Check angles 04:21:22 SkyScan query 04:21:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 04:21:23 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 04:21:23 Check angles 04:21:23 SkyScan query 04:21:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.66<-20244 Statuses=0008 0009 04:21:23 Msec=1500 True Az=112.995 Ze=-123.66 Az status=0008 Ze status=0009 04:21:23 Check angles 04:21:23 SkyScan query 04:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.615<-21641 Statuses=0008 0009 04:21:24 Msec=2250 True Az=112.995 Ze=-144.615 Az status=0008 Ze status=0009 04:21:24 Check angles 04:21:24 SkyScan query 04:21:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.54<-23036 Statuses=0008 0009 04:21:25 Msec=3000 True Az=112.995 Ze=-165.54 Az status=0008 Ze status=0009 04:21:25 Check angles 04:21:25 SkyScan query 04:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:21:26 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:21:26 Message to Master queued w/err=0: serial=130703 error=0 04:21:31 Received message from Master: op=Filter serial=130704 04:21:31 Color wheel filter change from 0 to 0 04:21:31 FLIGetFilterPos err=0 currentPosition=0 04:21:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:31 Filter is already there-color wheel unchanged 04:21:31 Received message from Master: op=Shutter serial=130705 04:21:31 Shutter LASER open 04:21:31 Received message from Camera: op=State serial=130707 04:21:31 GetSingleValue result=40 Value=cccccccc 04:21:31 SkyScan query 04:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:21:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:31 Parameters OK 04:21:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:31 Set A/D data flow result=40 04:21:31 Set A/D channel type result=40 04:21:31 Set A/D encoding result=40 04:21:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:31 Set channel filter=0.000000e+000 result=40 04:21:31 Config A/D Result=40 04:21:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:31 Get A/D filter: -9.255963e+061 result=40 04:21:31 Get A/D value=-858993460 result=40 04:21:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:31 Parameters OK 04:21:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:31 Set A/D data flow result=40 04:21:31 Set A/D channel type result=40 04:21:31 Set A/D encoding result=40 04:21:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:31 Set channel filter=0.000000e+000 result=40 04:21:31 Config A/D Result=40 04:21:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:31 Get A/D filter: -9.255963e+061 result=40 04:21:31 Get A/D value=-858993460 result=40 04:21:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:31 Aux= 04:21:31 Message to Camera, serial 130707 queued 04:21:40 Received message from Master: op=Shutter serial=130717 04:21:40 Shutter LASER close 04:21:40 Received message from Master: op=PointingHead serial=130721 04:21:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:21:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:21:41 Point started: ret=0 04:21:41 point_skyscan result=0 04:21:41 Check angles 04:21:41 SkyScan query 04:21:42 SkyScan query done: ret=0 az=89.85<-5990 ze=157.32<-1512 Statuses=0009 0009 04:21:42 Msec=0 True Az=89.85 Ze=157.32 Az status=0009 Ze status=0009 04:21:42 Check angles 04:21:42 SkyScan query 04:21:43 SkyScan query done: ret=0 az=72.525<-4835 ze=136.365<-2909 Statuses=0009 0009 04:21:43 Msec=750 True Az=72.525 Ze=136.365 Az status=0009 Ze status=0009 04:21:43 Check angles 04:21:43 SkyScan query 04:21:44 SkyScan query done: ret=0 az=55.14<-3676 ze=115.455<-4303 Statuses=0009 0009 04:21:44 Msec=1500 True Az=55.14 Ze=115.455 Az status=0009 Ze status=0009 04:21:44 Check angles 04:21:44 SkyScan query 04:21:44 SkyScan query done: ret=0 az=41.01<-2734 ze=94.455<-5703 Statuses=0009 0009 04:21:44 Msec=2250 True Az=41.01 Ze=94.455 Az status=0009 Ze status=0009 04:21:44 Check angles 04:21:44 SkyScan query 04:21:45 SkyScan query done: ret=0 az=40.995<-2733 ze=73.5<-7100 Statuses=0008 0009 04:21:45 Msec=3000 True Az=40.995 Ze=73.5 Az status=0008 Ze status=0009 04:21:45 Check angles 04:21:45 SkyScan query 04:21:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.875<-8475 Statuses=0008 0009 04:21:46 Msec=3750 True Az=40.995 Ze=52.875 Az status=0008 Ze status=0009 04:21:46 Check angles 04:21:46 SkyScan query 04:21:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:21:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:21:47 Message to Master queued w/err=0: serial=130721 error=0 04:21:52 Received message from Master: op=Filter serial=130722 04:21:52 Color wheel filter change from 0 to 0 04:21:52 FLIGetFilterPos err=0 currentPosition=0 04:21:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:52 Filter is already there-color wheel unchanged 04:21:52 Received message from Master: op=Shutter serial=130723 04:21:52 Shutter LASER close 04:21:52 Received message from Camera: op=State serial=130725 04:21:52 GetSingleValue result=40 Value=cccccccc 04:21:52 SkyScan query 04:21:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:21:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:52 Parameters OK 04:21:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:52 Set A/D data flow result=40 04:21:52 Set A/D channel type result=40 04:21:52 Set A/D encoding result=40 04:21:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:52 Set channel filter=0.000000e+000 result=40 04:21:52 Config A/D Result=40 04:21:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:52 Get A/D filter: -9.255963e+061 result=40 04:21:52 Get A/D value=-858993460 result=40 04:21:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:52 Parameters OK 04:21:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:52 Set A/D data flow result=40 04:21:52 Set A/D channel type result=40 04:21:52 Set A/D encoding result=40 04:21:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:52 Set channel filter=0.000000e+000 result=40 04:21:52 Config A/D Result=40 04:21:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:52 Get A/D filter: -9.255963e+061 result=40 04:21:52 Get A/D value=-858993460 result=40 04:21:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:52 Aux= 04:21:52 Message to Camera, serial 130725 queued 04:22:29 Received message from Master: op=PointingHead serial=130738 04:22:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:22:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:22:30 Point started: ret=0 04:22:30 point_skyscan result=0 04:22:30 Check angles 04:22:30 SkyScan query 04:22:31 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 04:22:31 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 04:22:31 Check angles 04:22:31 SkyScan query 04:22:32 SkyScan query done: ret=0 az=81.78<-5452 ze=66.51<-7566 Statuses=0009 0008 04:22:32 Msec=750 True Az=81.78 Ze=66.51 Az status=0009 Ze status=0008 04:22:32 Check angles 04:22:32 SkyScan query 04:22:32 SkyScan query done: ret=0 az=99.87<-6658 ze=66.495<-7567 Statuses=0009 0008 04:22:32 Msec=1500 True Az=99.87 Ze=66.495 Az status=0009 Ze status=0008 04:22:33 Check angles 04:22:33 SkyScan query 04:22:33 SkyScan query done: ret=0 az=117.63<-7842 ze=66.495<-7567 Statuses=0009 0008 04:22:33 Msec=2250 True Az=117.63 Ze=66.495 Az status=0009 Ze status=0008 04:22:33 Check angles 04:22:33 SkyScan query 04:22:34 SkyScan query done: ret=0 az=135.03<-9002 ze=66.495<-7567 Statuses=0009 0008 04:22:34 Msec=3000 True Az=135.03 Ze=66.495 Az status=0009 Ze status=0008 04:22:34 Check angles 04:22:34 SkyScan query 04:22:35 SkyScan query done: ret=0 az=152.505<-10167 ze=66.495<-7567 Statuses=0009 0008 04:22:35 Msec=3750 True Az=152.505 Ze=66.495 Az status=0009 Ze status=0008 04:22:35 Check angles 04:22:35 SkyScan query 04:22:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:22:35 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:22:35 Message to Master queued w/err=0: serial=130738 error=0 04:22:40 Received message from Master: op=Filter serial=130739 04:22:40 Color wheel filter change from 0 to 0 04:22:40 FLIGetFilterPos err=0 currentPosition=0 04:22:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:40 Filter is already there-color wheel unchanged 04:22:41 Received message from Master: op=Shutter serial=130740 04:22:41 Shutter LASER close 04:22:41 Received message from Camera: op=State serial=130742 04:22:41 GetSingleValue result=40 Value=cccccccc 04:22:41 SkyScan query 04:22:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:22:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:41 Parameters OK 04:22:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:41 Set A/D data flow result=40 04:22:41 Set A/D channel type result=40 04:22:41 Set A/D encoding result=40 04:22:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:41 Set channel filter=0.000000e+000 result=40 04:22:41 Config A/D Result=40 04:22:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:41 Get A/D filter: -9.255963e+061 result=40 04:22:41 Get A/D value=-858993460 result=40 04:22:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:41 Parameters OK 04:22:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:41 Set A/D data flow result=40 04:22:41 Set A/D channel type result=40 04:22:41 Set A/D encoding result=40 04:22:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:41 Set channel filter=0.000000e+000 result=40 04:22:41 Config A/D Result=40 04:22:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:41 Get A/D filter: -9.255963e+061 result=40 04:22:41 Get A/D value=-858993460 result=40 04:22:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:41 Aux= 04:22:41 Message to Camera, serial 130742 queued 04:23:18 Received message from Master: op=PointingHead serial=130755 04:23:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:23:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:23:18 Point started: ret=0 04:23:18 point_skyscan result=0 04:23:19 Check angles 04:23:19 SkyScan query 04:23:20 SkyScan query done: ret=0 az=134.64<-8976 ze=36.45<-9570 Statuses=0009 0009 04:23:20 Msec=0 True Az=134.64 Ze=36.45 Az status=0009 Ze status=0009 04:23:20 Check angles 04:23:20 SkyScan query 04:23:21 SkyScan query done: ret=0 az=116.925<-7795 ze=15.075<-10995 Statuses=0009 0009 04:23:21 Msec=750 True Az=116.925 Ze=15.075 Az status=0009 Ze status=0009 04:23:21 Check angles 04:23:21 SkyScan query 04:23:21 SkyScan query done: ret=0 az=99.48<-6632 ze=-5.925<-12395 Statuses=0009 0009 04:23:21 Msec=1500 True Az=99.48 Ze=-5.925 Az status=0009 Ze status=0009 04:23:21 Check angles 04:23:21 SkyScan query 04:23:22 SkyScan query done: ret=0 az=82.005<-5467 ze=-26.865<-13791 Statuses=0009 0009 04:23:22 Msec=2250 True Az=82.005 Ze=-26.865 Az status=0009 Ze status=0009 04:23:22 Check angles 04:23:22 SkyScan query 04:23:23 SkyScan query done: ret=0 az=64.515<-4301 ze=-38.58<-14572 Statuses=0009 0008 04:23:23 Msec=3000 True Az=64.515 Ze=-38.58 Az status=0009 Ze status=0008 04:23:23 Check angles 04:23:23 SkyScan query 04:23:24 SkyScan query done: ret=0 az=47.085<-3139 ze=-38.52<-14568 Statuses=0009 0008 04:23:24 Msec=3750 True Az=47.085 Ze=-38.52 Az status=0009 Ze status=0008 04:23:24 Check angles 04:23:24 SkyScan query 04:23:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:23:24 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:23:24 Message to Master queued w/err=0: serial=130755 error=0 04:23:29 Received message from Master: op=Filter serial=130756 04:23:29 Color wheel filter change from 0 to 0 04:23:29 FLIGetFilterPos err=0 currentPosition=0 04:23:29 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:29 Filter is already there-color wheel unchanged 04:23:29 Received message from Master: op=Shutter serial=130757 04:23:29 Shutter LASER close 04:23:30 Received message from Camera: op=State serial=130759 04:23:30 GetSingleValue result=40 Value=cccccccc 04:23:30 SkyScan query 04:23:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:23:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:30 Parameters OK 04:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:30 Set A/D data flow result=40 04:23:30 Set A/D channel type result=40 04:23:30 Set A/D encoding result=40 04:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:30 Set channel filter=0.000000e+000 result=40 04:23:30 Config A/D Result=40 04:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:30 Get A/D filter: -9.255963e+061 result=40 04:23:30 Get A/D value=-858993460 result=40 04:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:30 Parameters OK 04:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:30 Set A/D data flow result=40 04:23:30 Set A/D channel type result=40 04:23:30 Set A/D encoding result=40 04:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:30 Set channel filter=0.000000e+000 result=40 04:23:30 Config A/D Result=40 04:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:30 Get A/D filter: -9.255963e+061 result=40 04:23:30 Get A/D value=-858993460 result=40 04:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:30 Aux= 04:23:30 Message to Camera, serial 130759 queued 04:24:07 Received message from Master: op=PointingHead serial=130772 04:24:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:24:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:24:07 Point started: ret=0 04:24:07 point_skyscan result=0 04:24:08 Check angles 04:24:08 SkyScan query 04:24:09 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.565<-16571 Statuses=0009 0009 04:24:09 Msec=0 True Az=64.215 Ze=-68.565 Az status=0009 Ze status=0009 04:24:09 Check angles 04:24:09 SkyScan query 04:24:09 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.55<-17970 Statuses=0009 0009 04:24:09 Msec=750 True Az=81.615 Ze=-89.55 Az status=0009 Ze status=0009 04:24:10 Check angles 04:24:10 SkyScan query 04:24:10 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.505<-19367 Statuses=0009 0009 04:24:10 Msec=1500 True Az=99.105 Ze=-110.505 Az status=0009 Ze status=0009 04:24:10 Check angles 04:24:10 SkyScan query 04:24:11 SkyScan query done: ret=0 az=116.67<-7778 ze=-131.415<-20761 Statuses=0009 0009 04:24:11 Msec=2250 True Az=116.67 Ze=-131.415 Az status=0009 Ze status=0009 04:24:11 Check angles 04:24:11 SkyScan query 04:24:12 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.555<-21437 Statuses=0009 0008 04:24:12 Msec=3000 True Az=131.07 Ze=-141.555 Az status=0009 Ze status=0008 04:24:12 Check angles 04:24:12 SkyScan query 04:24:12 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:24:12 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:24:12 Message to Master queued w/err=0: serial=130772 error=0 04:24:17 Received message from Master: op=Filter serial=130773 04:24:17 Color wheel filter change from 0 to 0 04:24:17 FLIGetFilterPos err=0 currentPosition=0 04:24:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:17 Filter is already there-color wheel unchanged 04:24:18 Received message from Master: op=Shutter serial=130774 04:24:18 Shutter LASER close 04:24:18 Received message from Camera: op=State serial=130776 04:24:18 GetSingleValue result=40 Value=cccccccc 04:24:18 SkyScan query 04:24:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:24:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:18 Parameters OK 04:24:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:18 Set A/D data flow result=40 04:24:18 Set A/D channel type result=40 04:24:18 Set A/D encoding result=40 04:24:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:18 Set channel filter=0.000000e+000 result=40 04:24:18 Config A/D Result=40 04:24:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:18 Get A/D filter: -9.255963e+061 result=40 04:24:18 Get A/D value=-858993460 result=40 04:24:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:18 Parameters OK 04:24:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:18 Set A/D data flow result=40 04:24:18 Set A/D channel type result=40 04:24:18 Set A/D encoding result=40 04:24:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:18 Set channel filter=0.000000e+000 result=40 04:24:18 Config A/D Result=40 04:24:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:18 Get A/D filter: -9.255963e+061 result=40 04:24:18 Get A/D value=-858993460 result=40 04:24:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:18 Aux= 04:24:18 Message to Camera, serial 130776 queued 04:24:55 Received message from Master: op=PointingHead serial=130789 04:24:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:24:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:24:55 Point started: ret=0 04:24:55 point_skyscan result=0 04:24:56 Check angles 04:24:56 SkyScan query 04:24:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 04:24:57 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 04:24:57 Check angles 04:24:57 SkyScan query 04:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:24:57 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:24:57 Message to Master queued w/err=0: serial=130789 error=0 04:25:02 Received message from Master: op=Filter serial=130790 04:25:02 Color wheel filter change from 0 to 0 04:25:02 FLIGetFilterPos err=0 currentPosition=0 04:25:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:02 Filter is already there-color wheel unchanged 04:25:03 Received message from Master: op=Shutter serial=130791 04:25:03 Shutter LASER open 04:25:03 Received message from Camera: op=State serial=130793 04:25:03 GetSingleValue result=40 Value=cccccccc 04:25:03 SkyScan query 04:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:25:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:03 Parameters OK 04:25:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:03 Set A/D data flow result=40 04:25:03 Set A/D channel type result=40 04:25:03 Set A/D encoding result=40 04:25:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:03 Set channel filter=0.000000e+000 result=40 04:25:03 Config A/D Result=40 04:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:03 Get A/D filter: -9.255963e+061 result=40 04:25:03 Get A/D value=-858993460 result=40 04:25:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:03 Parameters OK 04:25:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:03 Set A/D data flow result=40 04:25:03 Set A/D channel type result=40 04:25:03 Set A/D encoding result=40 04:25:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:03 Set channel filter=0.000000e+000 result=40 04:25:03 Config A/D Result=40 04:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:03 Get A/D filter: -9.255963e+061 result=40 04:25:03 Get A/D value=-858993460 result=40 04:25:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:03 Aux= 04:25:03 Message to Camera, serial 130793 queued 04:25:12 Received message from Master: op=Shutter serial=130803 04:25:12 Shutter LASER close 04:25:12 Received message from Master: op=PointingHead serial=130807 04:25:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:25:12 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:25:13 Point started: ret=0 04:25:13 point_skyscan result=0 04:25:13 Check angles 04:25:13 SkyScan query 04:25:14 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.37<-21558 Statuses=0009 0009 04:25:14 Msec=0 True Az=135.885 Ze=-143.37 Az status=0009 Ze status=0009 04:25:14 Check angles 04:25:14 SkyScan query 04:25:15 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.385<-20159 Statuses=0009 0009 04:25:15 Msec=750 True Az=153.36 Ze=-122.385 Az status=0009 Ze status=0009 04:25:15 Check angles 04:25:15 SkyScan query 04:25:16 SkyScan query done: ret=0 az=170.82<-11388 ze=-101.49<-18766 Statuses=0009 0009 04:25:16 Msec=1500 True Az=170.82 Ze=-101.49 Az status=0009 Ze status=0009 04:25:16 Check angles 04:25:16 SkyScan query 04:25:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.475<-17365 Statuses=0008 0009 04:25:16 Msec=2250 True Az=175.995 Ze=-80.475 Az status=0008 Ze status=0009 04:25:16 Check angles 04:25:16 SkyScan query 04:25:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.055<-15937 Statuses=0008 0009 04:25:17 Msec=3000 True Az=175.995 Ze=-59.055 Az status=0008 Ze status=0009 04:25:17 Check angles 04:25:17 SkyScan query 04:25:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:25:18 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:25:18 Message to Master queued w/err=0: serial=130807 error=0 04:25:23 Received message from Master: op=Filter serial=130808 04:25:23 Color wheel filter change from 0 to 0 04:25:23 FLIGetFilterPos err=0 currentPosition=0 04:25:23 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:23 Filter is already there-color wheel unchanged 04:25:23 Received message from Master: op=Shutter serial=130809 04:25:23 Shutter LASER close 04:25:23 Received message from Camera: op=State serial=130811 04:25:23 GetSingleValue result=40 Value=cccccccc 04:25:23 SkyScan query 04:25:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:25:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:24 Parameters OK 04:25:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:24 Set A/D data flow result=40 04:25:24 Set A/D channel type result=40 04:25:24 Set A/D encoding result=40 04:25:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:24 Set channel filter=0.000000e+000 result=40 04:25:24 Config A/D Result=40 04:25:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:24 Get A/D filter: -9.255963e+061 result=40 04:25:24 Get A/D value=-858993460 result=40 04:25:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:24 Parameters OK 04:25:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:24 Set A/D data flow result=40 04:25:24 Set A/D channel type result=40 04:25:24 Set A/D encoding result=40 04:25:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:24 Set channel filter=0.000000e+000 result=40 04:25:24 Config A/D Result=40 04:25:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:24 Get A/D filter: -9.255963e+061 result=40 04:25:24 Get A/D value=-858993460 result=40 04:25:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:24 Aux= 04:25:24 Message to Camera, serial 130811 queued 04:26:00 Received message from Master: op=PointingHead serial=130823 04:26:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:26:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:26:00 Point started: ret=0 04:26:00 point_skyscan result=0 04:26:01 Check angles 04:26:01 SkyScan query 04:26:01 SkyScan query done: ret=0 az=152.625<-10175 ze=-21.21<-13414 Statuses=0009 0009 04:26:01 Msec=0 True Az=152.625 Ze=-21.21 Az status=0009 Ze status=0009 04:26:02 Check angles 04:26:02 SkyScan query 04:26:02 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.27<-12018 Statuses=0009 0009 04:26:02 Msec=750 True Az=135.09 Ze=-0.27 Az status=0009 Ze status=0009 04:26:02 Check angles 04:26:02 SkyScan query [UTC 2018-12-14 04:26:03] 04:26:03 SkyScan query done: ret=0 az=117.57<-7838 ze=20.7<-10620 Statuses=0009 0009 04:26:03 Msec=1500 True Az=117.57 Ze=20.7 Az status=0009 Ze status=0009 04:26:03 Check angles 04:26:03 SkyScan query 04:26:04 SkyScan query done: ret=0 az=99.87<-6658 ze=42.075<-9195 Statuses=0009 0009 04:26:04 Msec=2250 True Az=99.87 Ze=42.075 Az status=0009 Ze status=0009 04:26:04 Check angles 04:26:04 SkyScan query 04:26:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 04:26:04 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 04:26:05 Check angles 04:26:05 SkyScan query 04:26:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:26:05 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:26:05 Message to Master queued w/err=0: serial=130823 error=0 04:26:10 Received message from Master: op=Filter serial=130824 04:26:10 Color wheel filter change from 0 to 0 04:26:10 FLIGetFilterPos err=0 currentPosition=0 04:26:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:10 Filter is already there-color wheel unchanged 04:26:10 Received message from Master: op=Shutter serial=130825 04:26:10 Shutter LASER close 04:26:10 Received message from Camera: op=State serial=130827 04:26:10 GetSingleValue result=40 Value=cccccccc 04:26:10 SkyScan query 04:26:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:26:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:11 Parameters OK 04:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:11 Set A/D data flow result=40 04:26:11 Set A/D channel type result=40 04:26:11 Set A/D encoding result=40 04:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:11 Set channel filter=0.000000e+000 result=40 04:26:11 Config A/D Result=40 04:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:11 Get A/D filter: -9.255963e+061 result=40 04:26:11 Get A/D value=-858993460 result=40 04:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:11 Parameters OK 04:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:11 Set A/D data flow result=40 04:26:11 Set A/D channel type result=40 04:26:11 Set A/D encoding result=40 04:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:11 Set channel filter=0.000000e+000 result=40 04:26:11 Config A/D Result=40 04:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:11 Get A/D filter: -9.255963e+061 result=40 04:26:11 Get A/D value=-858993460 result=40 04:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:11 Aux= 04:26:11 Message to Camera, serial 130827 queued 04:26:48 Received message from Master: op=PointingHead serial=130840 04:26:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:26:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:26:48 Point started: ret=0 04:26:48 point_skyscan result=0 04:26:49 Check angles 04:26:49 SkyScan query 04:26:49 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 04:26:49 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 04:26:50 Check angles 04:26:50 SkyScan query 04:26:50 SkyScan query done: ret=0 az=126.915<-8461 ze=38.505<-9433 Statuses=0009 0008 04:26:50 Msec=750 True Az=126.915 Ze=38.505 Az status=0009 Ze status=0008 04:26:50 Check angles 04:26:50 SkyScan query 04:26:51 SkyScan query done: ret=0 az=144.33<-9622 ze=38.505<-9433 Statuses=0009 0008 04:26:51 Msec=1500 True Az=144.33 Ze=38.505 Az status=0009 Ze status=0008 04:26:51 Check angles 04:26:51 SkyScan query 04:26:52 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 04:26:52 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 04:26:52 Check angles 04:26:52 SkyScan query 04:26:52 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:26:52 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:26:53 Check angles 04:26:53 SkyScan query 04:26:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:26:53 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:26:53 Message to Master queued w/err=0: serial=130840 error=0 04:26:58 Received message from Master: op=Filter serial=130841 04:26:58 Color wheel filter change from 0 to 0 04:26:58 FLIGetFilterPos err=0 currentPosition=0 04:26:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:58 Filter is already there-color wheel unchanged 04:26:58 Received message from Master: op=Shutter serial=130842 04:26:58 Shutter LASER close 04:26:58 Received message from Camera: op=State serial=130844 04:26:58 GetSingleValue result=40 Value=cccccccc 04:26:58 SkyScan query 04:26:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:26:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:59 Parameters OK 04:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:59 Set A/D data flow result=40 04:26:59 Set A/D channel type result=40 04:26:59 Set A/D encoding result=40 04:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:59 Set channel filter=0.000000e+000 result=40 04:26:59 Config A/D Result=40 04:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:59 Get A/D filter: -9.255963e+061 result=40 04:26:59 Get A/D value=-858993460 result=40 04:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:59 Parameters OK 04:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:59 Set A/D data flow result=40 04:26:59 Set A/D channel type result=40 04:26:59 Set A/D encoding result=40 04:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:59 Set channel filter=0.000000e+000 result=40 04:26:59 Config A/D Result=40 04:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:59 Get A/D filter: -9.255963e+061 result=40 04:26:59 Get A/D value=-858993460 result=40 04:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:59 Aux= 04:26:59 Message to Camera, serial 130844 queued 04:27:36 Received message from Master: op=PointingHead serial=130857 04:27:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:27:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:27:36 Point started: ret=0 04:27:36 point_skyscan result=0 04:27:37 Check angles 04:27:37 SkyScan query 04:27:38 SkyScan query done: ret=0 az=152.625<-10175 ze=8.145<-11457 Statuses=0009 0009 04:27:38 Msec=0 True Az=152.625 Ze=8.145 Az status=0009 Ze status=0009 04:27:38 Check angles 04:27:38 SkyScan query 04:27:38 SkyScan query done: ret=0 az=134.565<-8971 ze=-13.215<-12881 Statuses=0009 0009 04:27:38 Msec=750 True Az=134.565 Ze=-13.215 Az status=0009 Ze status=0009 04:27:38 Check angles 04:27:38 SkyScan query 04:27:39 SkyScan query done: ret=0 az=117.285<-7819 ze=-34.2<-14280 Statuses=0009 0009 04:27:39 Msec=1500 True Az=117.285 Ze=-34.2 Az status=0009 Ze status=0009 04:27:39 Check angles 04:27:39 SkyScan query 04:27:40 SkyScan query done: ret=0 az=99.84<-6656 ze=-51.57<-15438 Statuses=0009 0009 04:27:40 Msec=2250 True Az=99.84 Ze=-51.57 Az status=0009 Ze status=0009 04:27:40 Check angles 04:27:40 SkyScan query 04:27:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 04:27:41 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 04:27:41 Check angles 04:27:41 SkyScan query 04:27:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:27:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:27:41 Message to Master queued w/err=0: serial=130857 error=0 04:27:46 Received message from Master: op=Filter serial=130858 04:27:46 Color wheel filter change from 0 to 0 04:27:46 FLIGetFilterPos err=0 currentPosition=0 04:27:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:46 Filter is already there-color wheel unchanged 04:27:46 Received message from Master: op=Shutter serial=130859 04:27:46 Shutter LASER close 04:27:47 Received message from Camera: op=State serial=130861 04:27:47 GetSingleValue result=40 Value=cccccccc 04:27:47 SkyScan query 04:27:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:27:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:47 Parameters OK 04:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:47 Set A/D data flow result=40 04:27:47 Set A/D channel type result=40 04:27:47 Set A/D encoding result=40 04:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:47 Set channel filter=0.000000e+000 result=40 04:27:47 Config A/D Result=40 04:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:47 Get A/D filter: -9.255963e+061 result=40 04:27:47 Get A/D value=-858993460 result=40 04:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:47 Parameters OK 04:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:47 Set A/D data flow result=40 04:27:47 Set A/D channel type result=40 04:27:47 Set A/D encoding result=40 04:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:47 Set channel filter=0.000000e+000 result=40 04:27:47 Config A/D Result=40 04:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:47 Get A/D filter: -9.255963e+061 result=40 04:27:47 Get A/D value=-858993460 result=40 04:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:47 Aux= 04:27:47 Message to Camera, serial 130861 queued 04:28:24 Received message from Master: op=PointingHead serial=130874 04:28:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:28:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:28:24 Point started: ret=0 04:28:24 point_skyscan result=0 04:28:25 Check angles 04:28:25 SkyScan query 04:28:26 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.15<-17410 Statuses=0009 0009 04:28:26 Msec=0 True Az=108.885 Ze=-81.15 Az status=0009 Ze status=0009 04:28:26 Check angles 04:28:26 SkyScan query 04:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 04:28:26 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 04:28:27 Check angles 04:28:27 SkyScan query 04:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.075<-20205 Statuses=0008 0009 04:28:27 Msec=1500 True Az=112.995 Ze=-123.075 Az status=0008 Ze status=0009 04:28:27 Check angles 04:28:27 SkyScan query 04:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.015<-21601 Statuses=0008 0009 04:28:28 Msec=2250 True Az=112.995 Ze=-144.015 Az status=0008 Ze status=0009 04:28:28 Check angles 04:28:28 SkyScan query 04:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.985<-22999 Statuses=0008 0009 04:28:29 Msec=3000 True Az=112.995 Ze=-164.985 Az status=0008 Ze status=0009 04:28:29 Check angles 04:28:29 SkyScan query 04:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:28:29 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:28:29 Message to Master queued w/err=0: serial=130874 error=0 04:28:34 Received message from Master: op=Filter serial=130875 04:28:34 Color wheel filter change from 0 to 0 04:28:34 FLIGetFilterPos err=0 currentPosition=0 04:28:34 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:34 Filter is already there-color wheel unchanged 04:28:35 Received message from Master: op=Shutter serial=130876 04:28:35 Shutter LASER open 04:28:35 Received message from Camera: op=State serial=130878 04:28:35 GetSingleValue result=40 Value=cccccccc 04:28:35 SkyScan query 04:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:28:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:35 Parameters OK 04:28:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:35 Set A/D data flow result=40 04:28:35 Set A/D channel type result=40 04:28:35 Set A/D encoding result=40 04:28:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:35 Set channel filter=0.000000e+000 result=40 04:28:35 Config A/D Result=40 04:28:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:35 Get A/D filter: -9.255963e+061 result=40 04:28:35 Get A/D value=-858993460 result=40 04:28:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:35 Parameters OK 04:28:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:35 Set A/D data flow result=40 04:28:35 Set A/D channel type result=40 04:28:35 Set A/D encoding result=40 04:28:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:35 Set channel filter=0.000000e+000 result=40 04:28:35 Config A/D Result=40 04:28:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:35 Get A/D filter: -9.255963e+061 result=40 04:28:35 Get A/D value=-858993460 result=40 04:28:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:35 Aux= 04:28:35 Message to Camera, serial 130878 queued 04:28:44 Received message from Master: op=Shutter serial=130888 04:28:44 Shutter LASER close 04:28:44 Received message from Master: op=PointingHead serial=130892 04:28:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:28:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:28:44 Point started: ret=0 04:28:44 point_skyscan result=0 04:28:45 Check angles 04:28:45 SkyScan query 04:28:46 SkyScan query done: ret=0 az=89.85<-5990 ze=157.125<-1525 Statuses=0009 0009 04:28:46 Msec=0 True Az=89.85 Ze=157.125 Az status=0009 Ze status=0009 04:28:46 Check angles 04:28:46 SkyScan query 04:28:47 SkyScan query done: ret=0 az=72.27<-4818 ze=136.17<-2922 Statuses=0009 0009 04:28:47 Msec=750 True Az=72.27 Ze=136.17 Az status=0009 Ze status=0009 04:28:47 Check angles 04:28:47 SkyScan query 04:28:47 SkyScan query done: ret=0 az=54.78<-3652 ze=115.215<-4319 Statuses=0009 0009 04:28:47 Msec=1500 True Az=54.78 Ze=115.215 Az status=0009 Ze status=0009 04:28:47 Check angles 04:28:47 SkyScan query 04:28:48 SkyScan query done: ret=0 az=41.01<-2734 ze=94.245<-5717 Statuses=0009 0009 04:28:48 Msec=2250 True Az=41.01 Ze=94.245 Az status=0009 Ze status=0009 04:28:48 Check angles 04:28:48 SkyScan query 04:28:49 SkyScan query done: ret=0 az=40.995<-2733 ze=73.29<-7114 Statuses=0008 0009 04:28:49 Msec=3000 True Az=40.995 Ze=73.29 Az status=0008 Ze status=0009 04:28:49 Check angles 04:28:49 SkyScan query 04:28:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 04:28:50 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 04:28:50 Check angles 04:28:50 SkyScan query 04:28:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:28:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:28:50 Message to Master queued w/err=0: serial=130892 error=0 04:28:55 Received message from Master: op=Filter serial=130893 04:28:55 Color wheel filter change from 0 to 0 04:28:55 FLIGetFilterPos err=0 currentPosition=0 04:28:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:55 Filter is already there-color wheel unchanged 04:28:55 Received message from Master: op=Shutter serial=130894 04:28:55 Shutter LASER close 04:28:56 Received message from Camera: op=State serial=130896 04:28:56 GetSingleValue result=40 Value=cccccccc 04:28:56 SkyScan query 04:28:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:28:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:56 Parameters OK 04:28:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:56 Set A/D data flow result=40 04:28:56 Set A/D channel type result=40 04:28:56 Set A/D encoding result=40 04:28:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:56 Set channel filter=0.000000e+000 result=40 04:28:56 Config A/D Result=40 04:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:56 Get A/D filter: -9.255963e+061 result=40 04:28:56 Get A/D value=-858993460 result=40 04:28:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:56 Parameters OK 04:28:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:56 Set A/D data flow result=40 04:28:56 Set A/D channel type result=40 04:28:56 Set A/D encoding result=40 04:28:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:56 Set channel filter=0.000000e+000 result=40 04:28:56 Config A/D Result=40 04:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:56 Get A/D filter: -9.255963e+061 result=40 04:28:56 Get A/D value=-858993460 result=40 04:28:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:56 Aux= 04:28:56 Message to Camera, serial 130896 queued 04:29:33 Received message from Master: op=PointingHead serial=130909 04:29:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:29:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:29:33 Point started: ret=0 04:29:33 point_skyscan result=0 04:29:34 Check angles 04:29:34 SkyScan query 04:29:35 SkyScan query done: ret=0 az=63.975<-4265 ze=66.555<-7563 Statuses=0009 0008 04:29:35 Msec=0 True Az=63.975 Ze=66.555 Az status=0009 Ze status=0008 04:29:35 Check angles 04:29:35 SkyScan query 04:29:35 SkyScan query done: ret=0 az=81.375<-5425 ze=66.51<-7566 Statuses=0009 0008 04:29:35 Msec=750 True Az=81.375 Ze=66.51 Az status=0009 Ze status=0008 04:29:36 Check angles 04:29:36 SkyScan query 04:29:36 SkyScan query done: ret=0 az=98.85<-6590 ze=66.495<-7567 Statuses=0009 0008 04:29:36 Msec=1500 True Az=98.85 Ze=66.495 Az status=0009 Ze status=0008 04:29:36 Check angles 04:29:36 SkyScan query 04:29:37 SkyScan query done: ret=0 az=116.88<-7792 ze=66.495<-7567 Statuses=0009 0008 04:29:37 Msec=2250 True Az=116.88 Ze=66.495 Az status=0009 Ze status=0008 04:29:37 Check angles 04:29:37 SkyScan query 04:29:38 SkyScan query done: ret=0 az=134.235<-8949 ze=66.495<-7567 Statuses=0009 0008 04:29:38 Msec=3000 True Az=134.235 Ze=66.495 Az status=0009 Ze status=0008 04:29:38 Check angles 04:29:38 SkyScan query 04:29:38 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 04:29:38 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 04:29:39 Check angles 04:29:39 SkyScan query 04:29:39 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 04:29:39 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 04:29:39 Message to Master queued w/err=0: serial=130909 error=0 04:29:44 Received message from Master: op=Filter serial=130910 04:29:44 Color wheel filter change from 0 to 0 04:29:44 FLIGetFilterPos err=0 currentPosition=0 04:29:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:44 Filter is already there-color wheel unchanged 04:29:44 Received message from Master: op=Shutter serial=130911 04:29:44 Shutter LASER close 04:29:44 Received message from Camera: op=State serial=130913 04:29:44 GetSingleValue result=40 Value=cccccccc 04:29:44 SkyScan query 04:29:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:29:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:45 Parameters OK 04:29:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:45 Set A/D data flow result=40 04:29:45 Set A/D channel type result=40 04:29:45 Set A/D encoding result=40 04:29:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:45 Set channel filter=0.000000e+000 result=40 04:29:45 Config A/D Result=40 04:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:45 Get A/D filter: -9.255963e+061 result=40 04:29:45 Get A/D value=-858993460 result=40 04:29:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:45 Parameters OK 04:29:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:45 Set A/D data flow result=40 04:29:45 Set A/D channel type result=40 04:29:45 Set A/D encoding result=40 04:29:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:45 Set channel filter=0.000000e+000 result=40 04:29:45 Config A/D Result=40 04:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:45 Get A/D filter: -9.255963e+061 result=40 04:29:45 Get A/D value=-858993460 result=40 04:29:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:45 Aux= 04:29:45 Message to Camera, serial 130913 queued 04:30:22 Received message from Master: op=PointingHead serial=130926 04:30:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:30:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:30:22 Point started: ret=0 04:30:22 point_skyscan result=0 04:30:23 Check angles 04:30:23 SkyScan query 04:30:24 SkyScan query done: ret=0 az=135.195<-9013 ze=36.915<-9539 Statuses=0009 0009 04:30:24 Msec=0 True Az=135.195 Ze=36.915 Az status=0009 Ze status=0009 04:30:24 Check angles 04:30:24 SkyScan query 04:30:24 SkyScan query done: ret=0 az=117.735<-7849 ze=15.96<-10936 Statuses=0009 0009 04:30:24 Msec=750 True Az=117.735 Ze=15.96 Az status=0009 Ze status=0009 04:30:24 Check angles 04:30:24 SkyScan query 04:30:25 SkyScan query done: ret=0 az=100.305<-6687 ze=-4.995<-12333 Statuses=0009 0009 04:30:25 Msec=1500 True Az=100.305 Ze=-4.995 Az status=0009 Ze status=0009 04:30:25 Check angles 04:30:25 SkyScan query 04:30:26 SkyScan query done: ret=0 az=82.755<-5517 ze=-25.965<-13731 Statuses=0009 0009 04:30:26 Msec=2250 True Az=82.755 Ze=-25.965 Az status=0009 Ze status=0009 04:30:26 Check angles 04:30:26 SkyScan query 04:30:27 SkyScan query done: ret=0 az=65.31<-4354 ze=-38.58<-14572 Statuses=0009 0008 04:30:27 Msec=3000 True Az=65.31 Ze=-38.58 Az status=0009 Ze status=0008 04:30:27 Check angles 04:30:27 SkyScan query 04:30:27 SkyScan query done: ret=0 az=47.865<-3191 ze=-38.52<-14568 Statuses=0009 0008 04:30:27 Msec=3750 True Az=47.865 Ze=-38.52 Az status=0009 Ze status=0008 04:30:27 Check angles 04:30:27 SkyScan query 04:30:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:30:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:30:28 Message to Master queued w/err=0: serial=130926 error=0 04:30:33 Received message from Master: op=Filter serial=130927 04:30:33 Color wheel filter change from 0 to 0 04:30:33 FLIGetFilterPos err=0 currentPosition=0 04:30:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:33 Filter is already there-color wheel unchanged 04:30:33 Received message from Master: op=Shutter serial=130928 04:30:33 Shutter LASER close 04:30:33 Received message from Camera: op=State serial=130930 04:30:33 GetSingleValue result=40 Value=cccccccc 04:30:33 SkyScan query 04:30:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:30:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:34 Parameters OK 04:30:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:34 Set A/D data flow result=40 04:30:34 Set A/D channel type result=40 04:30:34 Set A/D encoding result=40 04:30:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:34 Set channel filter=0.000000e+000 result=40 04:30:34 Config A/D Result=40 04:30:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:34 Get A/D filter: -9.255963e+061 result=40 04:30:34 Get A/D value=-858993460 result=40 04:30:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:34 Parameters OK 04:30:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:34 Set A/D data flow result=40 04:30:34 Set A/D channel type result=40 04:30:34 Set A/D encoding result=40 04:30:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:34 Set channel filter=0.000000e+000 result=40 04:30:34 Config A/D Result=40 04:30:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:34 Get A/D filter: -9.255963e+061 result=40 04:30:34 Get A/D value=-858993460 result=40 04:30:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:34 Aux= 04:30:34 Message to Camera, serial 130930 queued 04:31:10 Received message from Master: op=PointingHead serial=130942 04:31:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:31:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:31:10 Point started: ret=0 04:31:10 point_skyscan result=0 04:31:11 Check angles 04:31:11 SkyScan query 04:31:11 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.7<-16580 Statuses=0009 0009 04:31:11 Msec=0 True Az=64.29 Ze=-68.7 Az status=0009 Ze status=0009 04:31:12 Check angles 04:31:12 SkyScan query 04:31:12 SkyScan query done: ret=0 az=81.705<-5447 ze=-89.685<-17979 Statuses=0009 0009 04:31:12 Msec=750 True Az=81.705 Ze=-89.685 Az status=0009 Ze status=0009 04:31:12 Check angles 04:31:12 SkyScan query 04:31:13 SkyScan query done: ret=0 az=99.345<-6623 ze=-110.625<-19375 Statuses=0009 0009 04:31:13 Msec=1500 True Az=99.345 Ze=-110.625 Az status=0009 Ze status=0009 04:31:13 Check angles 04:31:13 SkyScan query 04:31:14 SkyScan query done: ret=0 az=117.18<-7812 ze=-131.94<-20796 Statuses=0009 0009 04:31:14 Msec=2250 True Az=117.18 Ze=-131.94 Az status=0009 Ze status=0009 04:31:14 Check angles 04:31:14 SkyScan query 04:31:14 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.555<-21437 Statuses=0009 0008 04:31:14 Msec=3000 True Az=131.1 Ze=-141.555 Az status=0009 Ze status=0008 04:31:15 Check angles 04:31:15 SkyScan query 04:31:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:31:15 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:31:15 Message to Master queued w/err=0: serial=130942 error=0 04:31:20 Received message from Master: op=Filter serial=130943 04:31:20 Color wheel filter change from 0 to 0 04:31:20 FLIGetFilterPos err=0 currentPosition=0 04:31:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:20 Filter is already there-color wheel unchanged 04:31:20 Received message from Master: op=Shutter serial=130944 04:31:20 Shutter LASER close 04:31:20 Received message from Camera: op=State serial=130946 04:31:20 GetSingleValue result=40 Value=cccccccc 04:31:20 SkyScan query 04:31:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:31:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:21 Parameters OK 04:31:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:21 Set A/D data flow result=40 04:31:21 Set A/D channel type result=40 04:31:21 Set A/D encoding result=40 04:31:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:21 Set channel filter=0.000000e+000 result=40 04:31:21 Config A/D Result=40 04:31:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:21 Get A/D filter: -9.255963e+061 result=40 04:31:21 Get A/D value=-858993460 result=40 04:31:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:21 Parameters OK 04:31:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:21 Set A/D data flow result=40 04:31:21 Set A/D channel type result=40 04:31:21 Set A/D encoding result=40 04:31:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:21 Set channel filter=0.000000e+000 result=40 04:31:21 Config A/D Result=40 04:31:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:21 Get A/D filter: -9.255963e+061 result=40 04:31:21 Get A/D value=-858993460 result=40 04:31:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:21 Aux= 04:31:21 Message to Camera, serial 130946 queued 04:31:58 Received message from Master: op=PointingHead serial=130959 04:31:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:31:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:31:58 Point started: ret=0 04:31:58 point_skyscan result=0 04:31:59 Check angles 04:31:59 SkyScan query 04:32:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.39<-23426 Statuses=0009 0009 04:32:00 Msec=0 True Az=113.01 Ze=-171.39 Az status=0009 Ze status=0009 04:32:00 Check angles 04:32:00 SkyScan query 04:32:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:32:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:32:00 Message to Master queued w/err=0: serial=130959 error=0 04:32:05 Received message from Master: op=Filter serial=130960 04:32:05 Color wheel filter change from 0 to 0 04:32:05 FLIGetFilterPos err=0 currentPosition=0 04:32:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:05 Filter is already there-color wheel unchanged 04:32:05 Received message from Master: op=Shutter serial=130961 04:32:05 Shutter LASER open 04:32:06 Received message from Camera: op=State serial=130963 04:32:06 GetSingleValue result=40 Value=cccccccc 04:32:06 SkyScan query 04:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:32:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:06 Parameters OK 04:32:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:06 Set A/D data flow result=40 04:32:06 Set A/D channel type result=40 04:32:06 Set A/D encoding result=40 04:32:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:06 Set channel filter=0.000000e+000 result=40 04:32:06 Config A/D Result=40 04:32:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:06 Get A/D filter: -9.255963e+061 result=40 04:32:06 Get A/D value=-858993460 result=40 04:32:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:06 Parameters OK 04:32:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:06 Set A/D data flow result=40 04:32:06 Set A/D channel type result=40 04:32:06 Set A/D encoding result=40 04:32:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:06 Set channel filter=0.000000e+000 result=40 04:32:06 Config A/D Result=40 04:32:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:06 Get A/D filter: -9.255963e+061 result=40 04:32:06 Get A/D value=-858993460 result=40 04:32:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:32:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:32:06 Aux= 04:32:06 Message to Camera, serial 130963 queued 04:32:15 Received message from Master: op=Shutter serial=130973 04:32:15 Shutter LASER close 04:32:15 Received message from Master: op=PointingHead serial=130977 04:32:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:32:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:32:16 Point started: ret=0 04:32:16 point_skyscan result=0 04:32:16 Check angles 04:32:16 SkyScan query 04:32:17 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.935<-21529 Statuses=0009 0009 04:32:17 Msec=0 True Az=136.185 Ze=-142.935 Az status=0009 Ze status=0009 04:32:17 Check angles 04:32:17 SkyScan query 04:32:18 SkyScan query done: ret=0 az=153.645<-10243 ze=-121.98<-20132 Statuses=0009 0009 04:32:18 Msec=750 True Az=153.645 Ze=-121.98 Az status=0009 Ze status=0009 04:32:18 Check angles 04:32:18 SkyScan query 04:32:18 SkyScan query done: ret=0 az=171.12<-11408 ze=-101.055<-18737 Statuses=0009 0009 04:32:18 Msec=1500 True Az=171.12 Ze=-101.055 Az status=0009 Ze status=0009 04:32:19 Check angles 04:32:19 SkyScan query 04:32:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.115<-17341 Statuses=0008 0009 04:32:19 Msec=2250 True Az=176.01 Ze=-80.115 Az status=0008 Ze status=0009 04:32:19 Check angles 04:32:19 SkyScan query 04:32:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.115<-15941 Statuses=0008 0009 04:32:20 Msec=3000 True Az=176.01 Ze=-59.115 Az status=0008 Ze status=0009 04:32:20 Check angles 04:32:20 SkyScan query 04:32:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 04:32:21 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 04:32:21 Message to Master queued w/err=0: serial=130977 error=0 04:32:26 Received message from Master: op=Filter serial=130978 04:32:26 Color wheel filter change from 0 to 0 04:32:26 FLIGetFilterPos err=0 currentPosition=0 04:32:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:26 Filter is already there-color wheel unchanged 04:32:26 Received message from Master: op=Shutter serial=130979 04:32:26 Shutter LASER close 04:32:26 Received message from Camera: op=State serial=130981 04:32:26 GetSingleValue result=40 Value=cccccccc 04:32:26 SkyScan query 04:32:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:32:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:27 Parameters OK 04:32:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:27 Set A/D data flow result=40 04:32:27 Set A/D channel type result=40 04:32:27 Set A/D encoding result=40 04:32:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:27 Set channel filter=0.000000e+000 result=40 04:32:27 Config A/D Result=40 04:32:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:27 Get A/D filter: -9.255963e+061 result=40 04:32:27 Get A/D value=-858993460 result=40 04:32:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:27 Parameters OK 04:32:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:27 Set A/D data flow result=40 04:32:27 Set A/D channel type result=40 04:32:27 Set A/D encoding result=40 04:32:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:27 Set channel filter=0.000000e+000 result=40 04:32:27 Config A/D Result=40 04:32:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:27 Get A/D filter: -9.255963e+061 result=40 04:32:27 Get A/D value=-858993460 result=40 04:32:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:32:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:32:27 Aux= 04:32:27 Message to Camera, serial 130981 queued 04:33:03 Received message from Master: op=PointingHead serial=130994 04:33:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:33:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:33:04 Point started: ret=0 04:33:04 point_skyscan result=0 04:33:05 Check angles 04:33:05 SkyScan query 04:33:05 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.345<-13423 Statuses=0009 0009 04:33:05 Msec=0 True Az=152.655 Ze=-21.345 Az status=0009 Ze status=0009 04:33:05 Check angles 04:33:05 SkyScan query 04:33:06 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.36<-12024 Statuses=0009 0009 04:33:06 Msec=750 True Az=135.12 Ze=-0.36 Az status=0009 Ze status=0009 04:33:06 Check angles 04:33:06 SkyScan query 04:33:07 SkyScan query done: ret=0 az=117.33<-7822 ze=21.045<-10597 Statuses=0009 0009 04:33:07 Msec=1500 True Az=117.33 Ze=21.045 Az status=0009 Ze status=0009 04:33:07 Check angles 04:33:07 SkyScan query 04:33:07 SkyScan query done: ret=0 az=99.45<-6630 ze=42.375<-9175 Statuses=0009 0009 04:33:07 Msec=2250 True Az=99.45 Ze=42.375 Az status=0009 Ze status=0009 04:33:08 Check angles 04:33:08 SkyScan query 04:33:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 04:33:08 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 04:33:08 Check angles 04:33:08 SkyScan query 04:33:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:33:09 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:33:09 Message to Master queued w/err=0: serial=130994 error=0 04:33:14 Received message from Master: op=Filter serial=130995 04:33:14 Color wheel filter change from 0 to 0 04:33:14 FLIGetFilterPos err=0 currentPosition=0 04:33:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:14 Filter is already there-color wheel unchanged 04:33:14 Received message from Master: op=Shutter serial=130996 04:33:14 Shutter LASER close 04:33:14 Received message from Camera: op=State serial=130998 04:33:14 GetSingleValue result=40 Value=cccccccc 04:33:14 SkyScan query 04:33:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:33:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:15 Parameters OK 04:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:15 Set A/D data flow result=40 04:33:15 Set A/D channel type result=40 04:33:15 Set A/D encoding result=40 04:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:15 Set channel filter=0.000000e+000 result=40 04:33:15 Config A/D Result=40 04:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:15 Get A/D filter: -9.255963e+061 result=40 04:33:15 Get A/D value=-858993460 result=40 04:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:15 Parameters OK 04:33:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:15 Set A/D data flow result=40 04:33:15 Set A/D channel type result=40 04:33:15 Set A/D encoding result=40 04:33:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:15 Set channel filter=0.000000e+000 result=40 04:33:15 Config A/D Result=40 04:33:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:15 Get A/D filter: -9.255963e+061 result=40 04:33:15 Get A/D value=-858993460 result=40 04:33:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:15 Aux= 04:33:15 Message to Camera, serial 130998 queued 04:33:52 Received message from Master: op=PointingHead serial=131011 04:33:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:33:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:33:52 Point started: ret=0 04:33:52 point_skyscan result=0 04:33:53 Check angles 04:33:53 SkyScan query 04:33:53 SkyScan query done: ret=0 az=109.41<-7294 ze=38.49<-9434 Statuses=0009 0008 04:33:53 Msec=0 True Az=109.41 Ze=38.49 Az status=0009 Ze status=0008 04:33:53 Check angles 04:33:53 SkyScan query 04:33:54 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 04:33:54 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 04:33:54 Check angles 04:33:54 SkyScan query 04:33:55 SkyScan query done: ret=0 az=144.615<-9641 ze=38.505<-9433 Statuses=0009 0008 04:33:55 Msec=1500 True Az=144.615 Ze=38.505 Az status=0009 Ze status=0008 04:33:55 Check angles 04:33:55 SkyScan query 04:33:56 SkyScan query done: ret=0 az=162.615<-10841 ze=38.505<-9433 Statuses=0009 0008 04:33:56 Msec=2250 True Az=162.615 Ze=38.505 Az status=0009 Ze status=0008 04:33:56 Check angles 04:33:56 SkyScan query 04:33:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 04:33:56 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 04:33:56 Check angles 04:33:56 SkyScan query 04:33:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:33:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:33:57 Message to Master queued w/err=0: serial=131011 error=0 04:34:02 Received message from Master: op=Filter serial=131012 04:34:02 Color wheel filter change from 0 to 0 04:34:02 FLIGetFilterPos err=0 currentPosition=0 04:34:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:02 Filter is already there-color wheel unchanged 04:34:02 Received message from Master: op=Shutter serial=131013 04:34:02 Shutter LASER close 04:34:02 Received message from Camera: op=State serial=131015 04:34:02 GetSingleValue result=40 Value=cccccccc 04:34:02 SkyScan query 04:34:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:34:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:03 Parameters OK 04:34:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:03 Set A/D data flow result=40 04:34:03 Set A/D channel type result=40 04:34:03 Set A/D encoding result=40 04:34:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:03 Set channel filter=0.000000e+000 result=40 04:34:03 Config A/D Result=40 04:34:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:03 Get A/D filter: -9.255963e+061 result=40 04:34:03 Get A/D value=-858993460 result=40 04:34:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:03 Parameters OK 04:34:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:03 Set A/D data flow result=40 04:34:03 Set A/D channel type result=40 04:34:03 Set A/D encoding result=40 04:34:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:03 Set channel filter=0.000000e+000 result=40 04:34:03 Config A/D Result=40 04:34:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:03 Get A/D filter: -9.255963e+061 result=40 04:34:03 Get A/D value=-858993460 result=40 04:34:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:03 Aux= 04:34:03 Message to Camera, serial 131015 queued 04:34:40 Received message from Master: op=PointingHead serial=131028 04:34:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:34:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:34:40 Point started: ret=0 04:34:40 point_skyscan result=0 04:34:41 Check angles 04:34:41 SkyScan query 04:34:41 SkyScan query done: ret=0 az=152.97<-10198 ze=8.61<-11426 Statuses=0009 0009 04:34:41 Msec=0 True Az=152.97 Ze=8.61 Az status=0009 Ze status=0009 04:34:41 Check angles 04:34:41 SkyScan query 04:34:42 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.36<-12824 Statuses=0009 0009 04:34:42 Msec=750 True Az=135.405 Ze=-12.36 Az status=0009 Ze status=0009 04:34:42 Check angles 04:34:42 SkyScan query 04:34:43 SkyScan query done: ret=0 az=117.855<-7857 ze=-33.285<-14219 Statuses=0009 0009 04:34:43 Msec=1500 True Az=117.855 Ze=-33.285 Az status=0009 Ze status=0009 04:34:43 Check angles 04:34:43 SkyScan query 04:34:44 SkyScan query done: ret=0 az=100.485<-6699 ze=-51.54<-15436 Statuses=0009 0009 04:34:44 Msec=2250 True Az=100.485 Ze=-51.54 Az status=0009 Ze status=0009 04:34:44 Check angles 04:34:44 SkyScan query 04:34:44 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:34:44 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:34:44 Check angles 04:34:44 SkyScan query 04:34:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:34:45 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:34:45 Message to Master queued w/err=0: serial=131028 error=0 04:34:50 Received message from Master: op=Filter serial=131029 04:34:50 Color wheel filter change from 0 to 0 04:34:50 FLIGetFilterPos err=0 currentPosition=0 04:34:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:50 Filter is already there-color wheel unchanged 04:34:50 Received message from Master: op=Shutter serial=131030 04:34:50 Shutter LASER close 04:34:50 Received message from Camera: op=State serial=131032 04:34:50 GetSingleValue result=40 Value=cccccccc 04:34:50 SkyScan query 04:34:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:34:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:51 Parameters OK 04:34:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:51 Set A/D data flow result=40 04:34:51 Set A/D channel type result=40 04:34:51 Set A/D encoding result=40 04:34:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:51 Set channel filter=0.000000e+000 result=40 04:34:51 Config A/D Result=40 04:34:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:51 Get A/D filter: -9.255963e+061 result=40 04:34:51 Get A/D value=-858993460 result=40 04:34:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:51 Parameters OK 04:34:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:51 Set A/D data flow result=40 04:34:51 Set A/D channel type result=40 04:34:51 Set A/D encoding result=40 04:34:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:51 Set channel filter=0.000000e+000 result=40 04:34:51 Config A/D Result=40 04:34:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:51 Get A/D filter: -9.255963e+061 result=40 04:34:51 Get A/D value=-858993460 result=40 04:34:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:51 Aux= 04:34:51 Message to Camera, serial 131032 queued 04:35:28 Received message from Master: op=PointingHead serial=131045 04:35:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:35:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:35:28 Point started: ret=0 04:35:28 point_skyscan result=0 04:35:29 Check angles 04:35:29 SkyScan query 04:35:29 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.465<-17431 Statuses=0009 0009 04:35:29 Msec=0 True Az=109.125 Ze=-81.465 Az status=0009 Ze status=0009 04:35:30 Check angles 04:35:30 SkyScan query 04:35:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 04:35:30 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 04:35:30 Check angles 04:35:30 SkyScan query 04:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.825<-20255 Statuses=0008 0009 04:35:31 Msec=1500 True Az=112.995 Ze=-123.825 Az status=0008 Ze status=0009 04:35:31 Check angles 04:35:31 SkyScan query 04:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 04:35:32 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 04:35:32 Check angles 04:35:32 SkyScan query 04:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.72<-23048 Statuses=0008 0009 04:35:32 Msec=3000 True Az=112.995 Ze=-165.72 Az status=0008 Ze status=0009 04:35:33 Check angles 04:35:33 SkyScan query 04:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:35:33 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:35:33 Message to Master queued w/err=0: serial=131045 error=0 04:35:38 Received message from Master: op=Filter serial=131046 04:35:38 Color wheel filter change from 0 to 0 04:35:38 FLIGetFilterPos err=0 currentPosition=0 04:35:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:38 Filter is already there-color wheel unchanged 04:35:38 Received message from Master: op=Shutter serial=131047 04:35:38 Shutter LASER open 04:35:39 Received message from Camera: op=State serial=131049 04:35:39 GetSingleValue result=40 Value=cccccccc 04:35:39 SkyScan query 04:35:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:35:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:39 Parameters OK 04:35:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:39 Set A/D data flow result=40 04:35:39 Set A/D channel type result=40 04:35:39 Set A/D encoding result=40 04:35:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:39 Set channel filter=0.000000e+000 result=40 04:35:39 Config A/D Result=40 04:35:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:39 Get A/D filter: -9.255963e+061 result=40 04:35:39 Get A/D value=-858993460 result=40 04:35:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:39 Parameters OK 04:35:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:39 Set A/D data flow result=40 04:35:39 Set A/D channel type result=40 04:35:39 Set A/D encoding result=40 04:35:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:39 Set channel filter=0.000000e+000 result=40 04:35:39 Config A/D Result=40 04:35:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:39 Get A/D filter: -9.255963e+061 result=40 04:35:39 Get A/D value=-858993460 result=40 04:35:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:39 Aux= 04:35:39 Message to Camera, serial 131049 queued 04:35:48 Received message from Master: op=Shutter serial=131059 04:35:48 Shutter LASER close 04:35:48 Received message from Master: op=PointingHead serial=131063 04:35:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:35:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:35:48 Point started: ret=0 04:35:48 point_skyscan result=0 04:35:49 Check angles 04:35:49 SkyScan query 04:35:50 SkyScan query done: ret=0 az=90.225<-6015 ze=157.575<-1495 Statuses=0009 0009 04:35:50 Msec=0 True Az=90.225 Ze=157.575 Az status=0009 Ze status=0009 04:35:50 Check angles 04:35:50 SkyScan query 04:35:50 SkyScan query done: ret=0 az=72.78<-4852 ze=136.59<-2894 Statuses=0009 0009 04:35:50 Msec=750 True Az=72.78 Ze=136.59 Az status=0009 Ze status=0009 04:35:51 Check angles 04:35:51 SkyScan query 04:35:51 SkyScan query done: ret=0 az=55.35<-3690 ze=115.695<-4287 Statuses=0009 0009 04:35:51 Msec=1500 True Az=55.35 Ze=115.695 Az status=0009 Ze status=0009 04:35:51 Check angles [UTC 2018-12-14 04:35:51] 04:35:51 SkyScan query 04:35:52 SkyScan query done: ret=0 az=40.965<-2731 ze=92.97<-5802 Statuses=0009 0009 04:35:52 Msec=2250 True Az=40.965 Ze=92.97 Az status=0009 Ze status=0009 04:35:52 Check angles 04:35:52 SkyScan query 04:35:53 SkyScan query done: ret=0 az=40.995<-2733 ze=73.275<-7115 Statuses=0008 0009 04:35:53 Msec=3000 True Az=40.995 Ze=73.275 Az status=0008 Ze status=0009 [UTC 2018-12-14 04:35:53] 04:35:53 Check angles 04:35:53 SkyScan query 04:35:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 04:35:53 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 04:35:54 Check angles 04:35:54 SkyScan query 04:35:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:35:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:35:54 Message to Master queued w/err=0: serial=131063 error=0 04:35:59 Received message from Master: op=Filter serial=131064 04:35:59 Color wheel filter change from 0 to 0 04:35:59 FLIGetFilterPos err=0 currentPosition=0 04:35:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:59 Filter is already there-color wheel unchanged 04:35:59 Received message from Master: op=Shutter serial=131065 04:35:59 Shutter LASER close 04:36:00 Received message from Camera: op=State serial=131067 04:36:00 GetSingleValue result=40 Value=cccccccc 04:36:00 SkyScan query 04:36:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:36:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:00 Parameters OK 04:36:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:00 Set A/D data flow result=40 04:36:00 Set A/D channel type result=40 04:36:00 Set A/D encoding result=40 04:36:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:00 Set channel filter=0.000000e+000 result=40 04:36:00 Config A/D Result=40 04:36:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:00 Get A/D filter: -9.255963e+061 result=40 04:36:00 Get A/D value=-858993460 result=40 04:36:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:00 Parameters OK 04:36:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:00 Set A/D data flow result=40 04:36:00 Set A/D channel type result=40 04:36:00 Set A/D encoding result=40 04:36:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:00 Set channel filter=0.000000e+000 result=40 04:36:00 Config A/D Result=40 04:36:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:00 Get A/D filter: -9.255963e+061 result=40 04:36:00 Get A/D value=-858993460 result=40 04:36:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:00 Aux= 04:36:00 Message to Camera, serial 131067 queued 04:36:37 Received message from Master: op=PointingHead serial=131080 04:36:37 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:36:37 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:36:37 Point started: ret=0 04:36:37 point_skyscan result=0 04:36:38 Check angles 04:36:38 SkyScan query 04:36:39 SkyScan query done: ret=0 az=63.87<-4258 ze=66.555<-7563 Statuses=0009 0008 04:36:39 Msec=0 True Az=63.87 Ze=66.555 Az status=0009 Ze status=0008 04:36:39 Check angles 04:36:39 SkyScan query 04:36:39 SkyScan query done: ret=0 az=81.39<-5426 ze=66.51<-7566 Statuses=0009 0008 04:36:39 Msec=750 True Az=81.39 Ze=66.51 Az status=0009 Ze status=0008 04:36:40 Check angles 04:36:40 SkyScan query 04:36:40 SkyScan query done: ret=0 az=98.76<-6584 ze=66.495<-7567 Statuses=0009 0008 04:36:40 Msec=1500 True Az=98.76 Ze=66.495 Az status=0009 Ze status=0008 04:36:40 Check angles 04:36:40 SkyScan query 04:36:41 SkyScan query done: ret=0 az=116.265<-7751 ze=66.495<-7567 Statuses=0009 0008 04:36:41 Msec=2250 True Az=116.265 Ze=66.495 Az status=0009 Ze status=0008 04:36:41 Check angles 04:36:41 SkyScan query 04:36:42 SkyScan query done: ret=0 az=133.8<-8920 ze=66.495<-7567 Statuses=0009 0008 04:36:42 Msec=3000 True Az=133.8 Ze=66.495 Az status=0009 Ze status=0008 04:36:42 Check angles 04:36:42 SkyScan query 04:36:42 SkyScan query done: ret=0 az=151.17<-10078 ze=66.495<-7567 Statuses=0009 0008 04:36:42 Msec=3750 True Az=151.17 Ze=66.495 Az status=0009 Ze status=0008 04:36:43 Check angles 04:36:43 SkyScan query 04:36:43 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 04:36:43 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 04:36:43 Message to Master queued w/err=0: serial=131080 error=0 04:36:48 Received message from Master: op=Filter serial=131081 04:36:48 Color wheel filter change from 0 to 0 04:36:48 FLIGetFilterPos err=0 currentPosition=0 04:36:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:48 Filter is already there-color wheel unchanged 04:36:48 Received message from Master: op=Shutter serial=131082 04:36:48 Shutter LASER close 04:36:48 Received message from Camera: op=State serial=131084 04:36:48 GetSingleValue result=40 Value=cccccccc 04:36:48 SkyScan query 04:36:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:36:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:49 Parameters OK 04:36:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:49 Set A/D data flow result=40 04:36:49 Set A/D channel type result=40 04:36:49 Set A/D encoding result=40 04:36:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:49 Set channel filter=0.000000e+000 result=40 04:36:49 Config A/D Result=40 04:36:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:49 Get A/D filter: -9.255963e+061 result=40 04:36:49 Get A/D value=-858993460 result=40 04:36:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:49 Parameters OK 04:36:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:49 Set A/D data flow result=40 04:36:49 Set A/D channel type result=40 04:36:49 Set A/D encoding result=40 04:36:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:49 Set channel filter=0.000000e+000 result=40 04:36:49 Config A/D Result=40 04:36:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:49 Get A/D filter: -9.255963e+061 result=40 04:36:49 Get A/D value=-858993460 result=40 04:36:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:49 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:49 Aux= 04:36:49 Message to Camera, serial 131084 queued 04:37:25 Received message from Master: op=PointingHead serial=131096 04:37:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:37:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:37:25 Point started: ret=0 04:37:25 point_skyscan result=0 04:37:26 Check angles 04:37:26 SkyScan query 04:37:26 SkyScan query done: ret=0 az=135.12<-9008 ze=36.855<-9543 Statuses=0009 0009 04:37:26 Msec=0 True Az=135.12 Ze=36.855 Az status=0009 Ze status=0009 04:37:27 Check angles 04:37:27 SkyScan query 04:37:27 SkyScan query done: ret=0 az=117.615<-7841 ze=15.9<-10940 Statuses=0009 0009 04:37:27 Msec=750 True Az=117.615 Ze=15.9 Az status=0009 Ze status=0009 04:37:27 Check angles 04:37:27 SkyScan query 04:37:28 SkyScan query done: ret=0 az=100.245<-6683 ze=-5.055<-12337 Statuses=0009 0009 04:37:28 Msec=1500 True Az=100.245 Ze=-5.055 Az status=0009 Ze status=0009 04:37:28 Check angles 04:37:28 SkyScan query 04:37:29 SkyScan query done: ret=0 az=82.29<-5486 ze=-26.43<-13762 Statuses=0009 0009 04:37:29 Msec=2250 True Az=82.29 Ze=-26.43 Az status=0009 Ze status=0009 04:37:29 Check angles 04:37:29 SkyScan query 04:37:30 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.58<-14572 Statuses=0009 0008 04:37:30 Msec=3000 True Az=64.92 Ze=-38.58 Az status=0009 Ze status=0008 04:37:30 Check angles 04:37:30 SkyScan query 04:37:30 SkyScan query done: ret=0 az=47.46<-3164 ze=-38.52<-14568 Statuses=0009 0008 04:37:30 Msec=3750 True Az=47.46 Ze=-38.52 Az status=0009 Ze status=0008 04:37:30 Check angles 04:37:30 SkyScan query 04:37:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:37:31 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:37:31 Message to Master queued w/err=0: serial=131096 error=0 04:37:36 Received message from Master: op=Filter serial=131097 04:37:36 Color wheel filter change from 0 to 0 04:37:36 FLIGetFilterPos err=0 currentPosition=0 04:37:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:36 Filter is already there-color wheel unchanged 04:37:36 Received message from Master: op=Shutter serial=131098 04:37:36 Shutter LASER close 04:37:36 Received message from Camera: op=State serial=131100 04:37:36 GetSingleValue result=40 Value=cccccccc 04:37:36 SkyScan query 04:37:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:37:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:37 Parameters OK 04:37:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:37 Set A/D data flow result=40 04:37:37 Set A/D channel type result=40 04:37:37 Set A/D encoding result=40 04:37:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:37 Set channel filter=0.000000e+000 result=40 04:37:37 Config A/D Result=40 04:37:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:37 Get A/D filter: -9.255963e+061 result=40 04:37:37 Get A/D value=-858993460 result=40 04:37:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:37 Parameters OK 04:37:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:37 Set A/D data flow result=40 04:37:37 Set A/D channel type result=40 04:37:37 Set A/D encoding result=40 04:37:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:37 Set channel filter=0.000000e+000 result=40 04:37:37 Config A/D Result=40 04:37:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:37 Get A/D filter: -9.255963e+061 result=40 04:37:37 Get A/D value=-858993460 result=40 04:37:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:37 Aux= 04:37:37 Message to Camera, serial 131100 queued 04:38:14 Received message from Master: op=PointingHead serial=131113 04:38:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:38:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:38:14 Point started: ret=0 04:38:14 point_skyscan result=0 04:38:15 Check angles 04:38:15 SkyScan query 04:38:15 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.355<-16557 Statuses=0009 0009 04:38:15 Msec=0 True Az=64.065 Ze=-68.355 Az status=0009 Ze status=0009 04:38:15 Check angles 04:38:15 SkyScan query 04:38:16 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.355<-17957 Statuses=0009 0009 04:38:16 Msec=750 True Az=81.555 Ze=-89.355 Az status=0009 Ze status=0009 04:38:16 Check angles 04:38:16 SkyScan query 04:38:17 SkyScan query done: ret=0 az=98.925<-6595 ze=-110.31<-19354 Statuses=0009 0009 04:38:17 Msec=1500 True Az=98.925 Ze=-110.31 Az status=0009 Ze status=0009 04:38:17 Check angles 04:38:17 SkyScan query 04:38:18 SkyScan query done: ret=0 az=116.46<-7764 ze=-131.25<-20750 Statuses=0009 0009 04:38:18 Msec=2250 True Az=116.46 Ze=-131.25 Az status=0009 Ze status=0009 04:38:18 Check angles 04:38:18 SkyScan query 04:38:18 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 04:38:18 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 04:38:18 Check angles 04:38:18 SkyScan query 04:38:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 04:38:19 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 04:38:19 Message to Master queued w/err=0: serial=131113 error=0 04:38:24 Received message from Master: op=Filter serial=131114 04:38:24 Color wheel filter change from 0 to 0 04:38:24 FLIGetFilterPos err=0 currentPosition=0 04:38:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:24 Filter is already there-color wheel unchanged 04:38:24 Received message from Master: op=Shutter serial=131115 04:38:24 Shutter LASER close 04:38:24 Received message from Camera: op=State serial=131117 04:38:24 GetSingleValue result=40 Value=cccccccc 04:38:24 SkyScan query 04:38:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:38:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:25 Parameters OK 04:38:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:25 Set A/D data flow result=40 04:38:25 Set A/D channel type result=40 04:38:25 Set A/D encoding result=40 04:38:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:25 Set channel filter=0.000000e+000 result=40 04:38:25 Config A/D Result=40 04:38:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:25 Get A/D filter: -9.255963e+061 result=40 04:38:25 Get A/D value=-858993460 result=40 04:38:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:25 Parameters OK 04:38:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:25 Set A/D data flow result=40 04:38:25 Set A/D channel type result=40 04:38:25 Set A/D encoding result=40 04:38:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:25 Set channel filter=0.000000e+000 result=40 04:38:25 Config A/D Result=40 04:38:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:25 Get A/D filter: -9.255963e+061 result=40 04:38:25 Get A/D value=-858993460 result=40 04:38:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:25 Aux= 04:38:25 Message to Camera, serial 131117 queued 04:39:02 Received message from Master: op=PointingHead serial=131130 04:39:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:39:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:39:02 Point started: ret=0 04:39:02 point_skyscan result=0 04:39:03 Check angles 04:39:03 SkyScan query 04:39:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 04:39:03 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 04:39:04 Check angles 04:39:04 SkyScan query 04:39:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:39:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:39:04 Message to Master queued w/err=0: serial=131130 error=0 04:39:09 Received message from Master: op=Filter serial=131131 04:39:09 Color wheel filter change from 0 to 0 04:39:09 FLIGetFilterPos err=0 currentPosition=0 04:39:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:09 Filter is already there-color wheel unchanged 04:39:09 Received message from Master: op=Shutter serial=131132 04:39:09 Shutter LASER open 04:39:09 Received message from Camera: op=State serial=131134 04:39:09 GetSingleValue result=40 Value=cccccccc 04:39:09 SkyScan query 04:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:39:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:10 Parameters OK 04:39:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:10 Set A/D data flow result=40 04:39:10 Set A/D channel type result=40 04:39:10 Set A/D encoding result=40 04:39:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:10 Set channel filter=0.000000e+000 result=40 04:39:10 Config A/D Result=40 04:39:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:10 Get A/D filter: -9.255963e+061 result=40 04:39:10 Get A/D value=-858993460 result=40 04:39:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:10 Parameters OK 04:39:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:10 Set A/D data flow result=40 04:39:10 Set A/D channel type result=40 04:39:10 Set A/D encoding result=40 04:39:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:10 Set channel filter=0.000000e+000 result=40 04:39:10 Config A/D Result=40 04:39:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:10 Get A/D filter: -9.255963e+061 result=40 04:39:10 Get A/D value=-858993460 result=40 04:39:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:10 Aux= 04:39:10 Message to Camera, serial 131134 queued 04:39:18 Received message from Master: op=Shutter serial=131144 04:39:18 Shutter LASER close 04:39:19 Received message from Master: op=PointingHead serial=131148 04:39:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:39:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:39:19 Point started: ret=0 04:39:19 point_skyscan result=0 04:39:20 Check angles 04:39:20 SkyScan query 04:39:21 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.055<-21537 Statuses=0009 0009 04:39:21 Msec=0 True Az=136.14 Ze=-143.055 Az status=0009 Ze status=0009 04:39:21 Check angles 04:39:21 SkyScan query 04:39:21 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.085<-20139 Statuses=0009 0009 04:39:21 Msec=750 True Az=153.585 Ze=-122.085 Az status=0009 Ze status=0009 04:39:22 Check angles 04:39:22 SkyScan query 04:39:22 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.16<-18744 Statuses=0009 0009 04:39:22 Msec=1500 True Az=171.24 Ze=-101.16 Az status=0009 Ze status=0009 04:39:22 Check angles 04:39:22 SkyScan query 04:39:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.22<-17348 Statuses=0008 0009 04:39:23 Msec=2250 True Az=176.01 Ze=-80.22 Az status=0008 Ze status=0009 04:39:23 Check angles 04:39:23 SkyScan query 04:39:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.205<-15947 Statuses=0008 0009 04:39:24 Msec=3000 True Az=176.01 Ze=-59.205 Az status=0008 Ze status=0009 04:39:24 Check angles 04:39:24 SkyScan query 04:39:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 04:39:24 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 04:39:24 Message to Master queued w/err=0: serial=131148 error=0 04:39:29 Received message from Master: op=Filter serial=131149 04:39:29 Color wheel filter change from 0 to 0 04:39:29 FLIGetFilterPos err=0 currentPosition=0 04:39:29 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:29 Filter is already there-color wheel unchanged 04:39:30 Received message from Master: op=Shutter serial=131150 04:39:30 Shutter LASER close 04:39:30 Received message from Camera: op=State serial=131152 04:39:30 GetSingleValue result=40 Value=cccccccc 04:39:30 SkyScan query 04:39:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:39:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:30 Parameters OK 04:39:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:30 Set A/D data flow result=40 04:39:30 Set A/D channel type result=40 04:39:30 Set A/D encoding result=40 04:39:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:30 Set channel filter=0.000000e+000 result=40 04:39:30 Config A/D Result=40 04:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:30 Get A/D filter: -9.255963e+061 result=40 04:39:30 Get A/D value=-858993460 result=40 04:39:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:30 Parameters OK 04:39:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:30 Set A/D data flow result=40 04:39:30 Set A/D channel type result=40 04:39:30 Set A/D encoding result=40 04:39:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:30 Set channel filter=0.000000e+000 result=40 04:39:30 Config A/D Result=40 04:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:30 Get A/D filter: -9.255963e+061 result=40 04:39:30 Get A/D value=-858993460 result=40 04:39:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:30 Aux= 04:39:30 Message to Camera, serial 131152 queued 04:40:06 Received message from Master: op=PointingHead serial=131164 04:40:06 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:40:06 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:40:07 Point started: ret=0 04:40:07 point_skyscan result=0 04:40:07 Check angles 04:40:07 SkyScan query 04:40:08 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.005<-13467 Statuses=0009 0009 04:40:08 Msec=0 True Az=153.225 Ze=-22.005 Az status=0009 Ze status=0009 04:40:08 Check angles 04:40:08 SkyScan query 04:40:09 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.02<-12068 Statuses=0009 0009 04:40:09 Msec=750 True Az=135.795 Ze=-1.02 Az status=0009 Ze status=0009 04:40:09 Check angles 04:40:09 SkyScan query 04:40:09 SkyScan query done: ret=0 az=117.795<-7853 ze=20.355<-10643 Statuses=0009 0009 04:40:09 Msec=1500 True Az=117.795 Ze=20.355 Az status=0009 Ze status=0009 04:40:10 Check angles 04:40:10 SkyScan query 04:40:10 SkyScan query done: ret=0 az=100.41<-6694 ze=41.31<-9246 Statuses=0009 0009 04:40:10 Msec=2250 True Az=100.41 Ze=41.31 Az status=0009 Ze status=0009 04:40:10 Check angles 04:40:10 SkyScan query 04:40:11 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 04:40:11 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 04:40:11 Check angles 04:40:11 SkyScan query 04:40:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:40:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:40:12 Message to Master queued w/err=0: serial=131164 error=0 04:40:17 Received message from Master: op=Filter serial=131165 04:40:17 Color wheel filter change from 0 to 0 04:40:17 FLIGetFilterPos err=0 currentPosition=0 04:40:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:17 Filter is already there-color wheel unchanged 04:40:17 Received message from Master: op=Shutter serial=131166 04:40:17 Shutter LASER close 04:40:17 Received message from Camera: op=State serial=131168 04:40:17 GetSingleValue result=40 Value=cccccccc 04:40:17 SkyScan query 04:40:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:40:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:18 Parameters OK 04:40:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:18 Set A/D data flow result=40 04:40:18 Set A/D channel type result=40 04:40:18 Set A/D encoding result=40 04:40:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:18 Set channel filter=0.000000e+000 result=40 04:40:18 Config A/D Result=40 04:40:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:18 Get A/D filter: -9.255963e+061 result=40 04:40:18 Get A/D value=-858993460 result=40 04:40:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:18 Parameters OK 04:40:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:18 Set A/D data flow result=40 04:40:18 Set A/D channel type result=40 04:40:18 Set A/D encoding result=40 04:40:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:18 Set channel filter=0.000000e+000 result=40 04:40:18 Config A/D Result=40 04:40:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:18 Get A/D filter: -9.255963e+061 result=40 04:40:18 Get A/D value=-858993460 result=40 04:40:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:18 Aux= 04:40:18 Message to Camera, serial 131168 queued 04:40:54 Received message from Master: op=PointingHead serial=131181 04:40:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:40:54 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:40:55 Point started: ret=0 04:40:55 point_skyscan result=0 04:40:55 Check angles 04:40:55 SkyScan query 04:40:56 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 04:40:56 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 04:40:56 Check angles 04:40:56 SkyScan query 04:40:57 SkyScan query done: ret=0 az=126.645<-8443 ze=38.505<-9433 Statuses=0009 0008 04:40:57 Msec=750 True Az=126.645 Ze=38.505 Az status=0009 Ze status=0008 04:40:57 Check angles 04:40:57 SkyScan query 04:40:58 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 04:40:58 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 04:40:58 Check angles 04:40:58 SkyScan query 04:40:58 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 04:40:58 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 04:40:58 Check angles 04:40:58 SkyScan query 04:40:59 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:40:59 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:40:59 Check angles 04:40:59 SkyScan query 04:41:00 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:41:00 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:41:00 Message to Master queued w/err=0: serial=131181 error=0 04:41:05 Received message from Master: op=Filter serial=131182 04:41:05 Color wheel filter change from 0 to 0 04:41:05 FLIGetFilterPos err=0 currentPosition=0 04:41:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:05 Filter is already there-color wheel unchanged 04:41:05 Received message from Master: op=Shutter serial=131183 04:41:05 Shutter LASER close 04:41:05 Received message from Camera: op=State serial=131185 04:41:05 GetSingleValue result=40 Value=cccccccc 04:41:05 SkyScan query 04:41:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:41:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:06 Parameters OK 04:41:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:06 Set A/D data flow result=40 04:41:06 Set A/D channel type result=40 04:41:06 Set A/D encoding result=40 04:41:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:06 Set channel filter=0.000000e+000 result=40 04:41:06 Config A/D Result=40 04:41:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:06 Get A/D filter: -9.255963e+061 result=40 04:41:06 Get A/D value=-858993460 result=40 04:41:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:06 Parameters OK 04:41:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:06 Set A/D data flow result=40 04:41:06 Set A/D channel type result=40 04:41:06 Set A/D encoding result=40 04:41:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:06 Set channel filter=0.000000e+000 result=40 04:41:06 Config A/D Result=40 04:41:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:06 Get A/D filter: -9.255963e+061 result=40 04:41:06 Get A/D value=-858993460 result=40 04:41:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:06 Aux= 04:41:06 Message to Camera, serial 131185 queued 04:41:42 Received message from Master: op=PointingHead serial=131198 04:41:42 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:41:42 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:41:43 Point started: ret=0 04:41:43 point_skyscan result=0 04:41:44 Check angles 04:41:44 SkyScan query 04:41:44 SkyScan query done: ret=0 az=152.775<-10185 ze=8.49<-11434 Statuses=0009 0009 04:41:44 Msec=0 True Az=152.775 Ze=8.49 Az status=0009 Ze status=0009 04:41:44 Check angles 04:41:44 SkyScan query 04:41:45 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.45<-12830 Statuses=0009 0009 04:41:45 Msec=750 True Az=135.375 Ze=-12.45 Az status=0009 Ze status=0009 04:41:45 Check angles 04:41:45 SkyScan query 04:41:46 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.405<-14227 Statuses=0009 0009 04:41:46 Msec=1500 True Az=117.78 Ze=-33.405 Az status=0009 Ze status=0009 04:41:46 Check angles 04:41:46 SkyScan query 04:41:46 SkyScan query done: ret=0 az=100.14<-6676 ze=-51.57<-15438 Statuses=0009 0009 04:41:46 Msec=2250 True Az=100.14 Ze=-51.57 Az status=0009 Ze status=0009 04:41:47 Check angles 04:41:47 SkyScan query 04:41:47 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:41:47 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:41:47 Check angles 04:41:47 SkyScan query 04:41:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:41:48 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:41:48 Message to Master queued w/err=0: serial=131198 error=0 04:41:53 Received message from Master: op=Filter serial=131199 04:41:53 Color wheel filter change from 0 to 0 04:41:53 FLIGetFilterPos err=0 currentPosition=0 04:41:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:53 Filter is already there-color wheel unchanged 04:41:53 Received message from Master: op=Shutter serial=131200 04:41:53 Shutter LASER close 04:41:53 Received message from Camera: op=State serial=131202 04:41:53 GetSingleValue result=40 Value=cccccccc 04:41:53 SkyScan query 04:41:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:41:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:54 Parameters OK 04:41:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:54 Set A/D data flow result=40 04:41:54 Set A/D channel type result=40 04:41:54 Set A/D encoding result=40 04:41:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:54 Set channel filter=0.000000e+000 result=40 04:41:54 Config A/D Result=40 04:41:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:54 Get A/D filter: -9.255963e+061 result=40 04:41:54 Get A/D value=-858993460 result=40 04:41:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:54 Parameters OK 04:41:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:54 Set A/D data flow result=40 04:41:54 Set A/D channel type result=40 04:41:54 Set A/D encoding result=40 04:41:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:54 Set channel filter=0.000000e+000 result=40 04:41:54 Config A/D Result=40 04:41:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:54 Get A/D filter: -9.255963e+061 result=40 04:41:54 Get A/D value=-858993460 result=40 04:41:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:54 Aux= 04:41:54 Message to Camera, serial 131202 queued 04:42:30 Received message from Master: op=PointingHead serial=131215 04:42:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:42:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:42:31 Point started: ret=0 04:42:31 point_skyscan result=0 04:42:32 Check angles 04:42:32 SkyScan query 04:42:32 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.195<-17413 Statuses=0009 0009 04:42:32 Msec=0 True Az=109.005 Ze=-81.195 Az status=0009 Ze status=0009 04:42:32 Check angles 04:42:32 SkyScan query 04:42:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 04:42:33 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 04:42:33 Check angles 04:42:33 SkyScan query 04:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.585<-20239 Statuses=0008 0009 04:42:34 Msec=1500 True Az=112.995 Ze=-123.585 Az status=0008 Ze status=0009 04:42:34 Check angles 04:42:34 SkyScan query 04:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 04:42:34 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 04:42:35 Check angles 04:42:35 SkyScan query 04:42:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 04:42:35 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 04:42:35 Check angles 04:42:35 SkyScan query 04:42:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:42:36 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:42:36 Message to Master queued w/err=0: serial=131215 error=0 04:42:41 Received message from Master: op=Filter serial=131216 04:42:41 Color wheel filter change from 0 to 0 04:42:41 FLIGetFilterPos err=0 currentPosition=0 04:42:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:41 Filter is already there-color wheel unchanged 04:42:41 Received message from Master: op=Shutter serial=131217 04:42:41 Shutter LASER open 04:42:41 Received message from Camera: op=State serial=131219 04:42:41 GetSingleValue result=40 Value=cccccccc 04:42:41 SkyScan query 04:42:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:42:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:42 Parameters OK 04:42:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:42 Set A/D data flow result=40 04:42:42 Set A/D channel type result=40 04:42:42 Set A/D encoding result=40 04:42:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:42 Set channel filter=0.000000e+000 result=40 04:42:42 Config A/D Result=40 04:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:42 Get A/D filter: -9.255963e+061 result=40 04:42:42 Get A/D value=-858993460 result=40 04:42:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:42 Parameters OK 04:42:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:42 Set A/D data flow result=40 04:42:42 Set A/D channel type result=40 04:42:42 Set A/D encoding result=40 04:42:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:42 Set channel filter=0.000000e+000 result=40 04:42:42 Config A/D Result=40 04:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:42 Get A/D filter: -9.255963e+061 result=40 04:42:42 Get A/D value=-858993460 result=40 04:42:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:42 Aux= 04:42:42 Message to Camera, serial 131219 queued 04:42:50 Received message from Master: op=Shutter serial=131229 04:42:50 Shutter LASER close 04:42:51 Received message from Master: op=PointingHead serial=131233 04:42:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:42:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:42:51 Point started: ret=0 04:42:51 point_skyscan result=0 04:42:52 Check angles 04:42:52 SkyScan query 04:42:52 SkyScan query done: ret=0 az=89.835<-5989 ze=157.245<-1517 Statuses=0009 0009 04:42:52 Msec=0 True Az=89.835 Ze=157.245 Az status=0009 Ze status=0009 04:42:53 Check angles 04:42:53 SkyScan query 04:42:53 SkyScan query done: ret=0 az=72.045<-4803 ze=135.825<-2945 Statuses=0009 0009 04:42:53 Msec=750 True Az=72.045 Ze=135.825 Az status=0009 Ze status=0009 04:42:53 Check angles 04:42:53 SkyScan query 04:42:54 SkyScan query done: ret=0 az=54.27<-3618 ze=114.435<-4371 Statuses=0009 0009 04:42:54 Msec=1500 True Az=54.27 Ze=114.435 Az status=0009 Ze status=0009 04:42:54 Check angles 04:42:54 SkyScan query 04:42:55 SkyScan query done: ret=0 az=40.98<-2732 ze=93.525<-5765 Statuses=0009 0009 04:42:55 Msec=2250 True Az=40.98 Ze=93.525 Az status=0009 Ze status=0009 04:42:55 Check angles 04:42:55 SkyScan query 04:42:55 SkyScan query done: ret=0 az=40.995<-2733 ze=72.525<-7165 Statuses=0008 0009 04:42:55 Msec=3000 True Az=40.995 Ze=72.525 Az status=0008 Ze status=0009 04:42:56 Check angles 04:42:56 SkyScan query 04:42:56 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 04:42:56 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 04:42:56 Check angles 04:42:56 SkyScan query 04:42:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:42:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:42:57 Message to Master queued w/err=0: serial=131233 error=0 04:43:02 Received message from Master: op=Filter serial=131234 04:43:02 Color wheel filter change from 0 to 0 04:43:02 FLIGetFilterPos err=0 currentPosition=0 04:43:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:02 Filter is already there-color wheel unchanged 04:43:02 Received message from Master: op=Shutter serial=131235 04:43:02 Shutter LASER close 04:43:02 Received message from Camera: op=State serial=131237 04:43:02 GetSingleValue result=40 Value=cccccccc 04:43:02 SkyScan query 04:43:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:43:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:03 Parameters OK 04:43:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:03 Set A/D data flow result=40 04:43:03 Set A/D channel type result=40 04:43:03 Set A/D encoding result=40 04:43:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:03 Set channel filter=0.000000e+000 result=40 04:43:03 Config A/D Result=40 04:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:03 Get A/D filter: -9.255963e+061 result=40 04:43:03 Get A/D value=-858993460 result=40 04:43:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:03 Parameters OK 04:43:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:03 Set A/D data flow result=40 04:43:03 Set A/D channel type result=40 04:43:03 Set A/D encoding result=40 04:43:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:03 Set channel filter=0.000000e+000 result=40 04:43:03 Config A/D Result=40 04:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:03 Get A/D filter: -9.255963e+061 result=40 04:43:03 Get A/D value=-858993460 result=40 04:43:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:03 Aux= 04:43:03 Message to Camera, serial 131237 queued 04:43:40 Received message from Master: op=PointingHead serial=131250 04:43:40 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:43:40 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:43:40 Point started: ret=0 04:43:40 point_skyscan result=0 04:43:41 Check angles 04:43:41 SkyScan query 04:43:41 SkyScan query done: ret=0 az=64.08<-4272 ze=66.555<-7563 Statuses=0009 0008 04:43:41 Msec=0 True Az=64.08 Ze=66.555 Az status=0009 Ze status=0008 04:43:42 Check angles 04:43:42 SkyScan query 04:43:42 SkyScan query done: ret=0 az=81.51<-5434 ze=66.495<-7567 Statuses=0009 0008 04:43:42 Msec=750 True Az=81.51 Ze=66.495 Az status=0009 Ze status=0008 04:43:42 Check angles 04:43:42 SkyScan query 04:43:43 SkyScan query done: ret=0 az=99.09<-6606 ze=66.495<-7567 Statuses=0009 0008 04:43:43 Msec=1500 True Az=99.09 Ze=66.495 Az status=0009 Ze status=0008 04:43:43 Check angles 04:43:43 SkyScan query 04:43:44 SkyScan query done: ret=0 az=116.925<-7795 ze=66.495<-7567 Statuses=0009 0008 04:43:44 Msec=2250 True Az=116.925 Ze=66.495 Az status=0009 Ze status=0008 04:43:44 Check angles 04:43:44 SkyScan query 04:43:44 SkyScan query done: ret=0 az=134.55<-8970 ze=66.495<-7567 Statuses=0009 0008 04:43:44 Msec=3000 True Az=134.55 Ze=66.495 Az status=0009 Ze status=0008 04:43:45 Check angles 04:43:45 SkyScan query 04:43:45 SkyScan query done: ret=0 az=151.8<-10120 ze=66.495<-7567 Statuses=0009 0008 04:43:45 Msec=3750 True Az=151.8 Ze=66.495 Az status=0009 Ze status=0008 04:43:45 Check angles 04:43:45 SkyScan query 04:43:46 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 04:43:46 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 04:43:46 Message to Master queued w/err=0: serial=131250 error=0 04:43:51 Received message from Master: op=Filter serial=131251 04:43:51 Color wheel filter change from 0 to 0 04:43:51 FLIGetFilterPos err=0 currentPosition=0 04:43:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:51 Filter is already there-color wheel unchanged 04:43:51 Received message from Master: op=Shutter serial=131252 04:43:51 Shutter LASER close 04:43:51 Received message from Camera: op=State serial=131254 04:43:51 GetSingleValue result=40 Value=cccccccc 04:43:51 SkyScan query 04:43:52 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:43:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:52 Parameters OK 04:43:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:52 Set A/D data flow result=40 04:43:52 Set A/D channel type result=40 04:43:52 Set A/D encoding result=40 04:43:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:52 Set channel filter=0.000000e+000 result=40 04:43:52 Config A/D Result=40 04:43:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:52 Get A/D filter: -9.255963e+061 result=40 04:43:52 Get A/D value=-858993460 result=40 04:43:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:52 Parameters OK 04:43:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:52 Set A/D data flow result=40 04:43:52 Set A/D channel type result=40 04:43:52 Set A/D encoding result=40 04:43:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:52 Set channel filter=0.000000e+000 result=40 04:43:52 Config A/D Result=40 04:43:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:52 Get A/D filter: -9.255963e+061 result=40 04:43:52 Get A/D value=-858993460 result=40 04:43:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:52 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:52 Aux= 04:43:52 Message to Camera, serial 131254 queued 04:44:28 Received message from Master: op=PointingHead serial=131267 04:44:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:44:28 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:44:29 Point started: ret=0 04:44:29 point_skyscan result=0 04:44:30 Check angles 04:44:30 SkyScan query 04:44:30 SkyScan query done: ret=0 az=134.835<-8989 ze=36.675<-9555 Statuses=0009 0009 04:44:30 Msec=0 True Az=134.835 Ze=36.675 Az status=0009 Ze status=0009 04:44:30 Check angles 04:44:30 SkyScan query 04:44:31 SkyScan query done: ret=0 az=117.315<-7821 ze=15.69<-10954 Statuses=0009 0009 04:44:31 Msec=750 True Az=117.315 Ze=15.69 Az status=0009 Ze status=0009 04:44:31 Check angles 04:44:31 SkyScan query 04:44:32 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.235<-12349 Statuses=0009 0009 04:44:32 Msec=1500 True Az=99.9 Ze=-5.235 Az status=0009 Ze status=0009 04:44:32 Check angles 04:44:32 SkyScan query 04:44:32 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.175<-13745 Statuses=0009 0009 04:44:32 Msec=2250 True Az=82.41 Ze=-26.175 Az status=0009 Ze status=0009 04:44:33 Check angles 04:44:33 SkyScan query 04:44:33 SkyScan query done: ret=0 az=64.965<-4331 ze=-38.565<-14571 Statuses=0009 0008 04:44:33 Msec=3000 True Az=64.965 Ze=-38.565 Az status=0009 Ze status=0008 04:44:33 Check angles 04:44:33 SkyScan query 04:44:34 SkyScan query done: ret=0 az=47.16<-3144 ze=-38.535<-14569 Statuses=0009 0008 04:44:34 Msec=3750 True Az=47.16 Ze=-38.535 Az status=0009 Ze status=0008 04:44:34 Check angles 04:44:34 SkyScan query 04:44:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:44:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:44:35 Message to Master queued w/err=0: serial=131267 error=0 04:44:40 Received message from Master: op=Filter serial=131268 04:44:40 Color wheel filter change from 0 to 0 04:44:40 FLIGetFilterPos err=0 currentPosition=0 04:44:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:40 Filter is already there-color wheel unchanged 04:44:40 Received message from Master: op=Shutter serial=131269 04:44:40 Shutter LASER close 04:44:40 Received message from Camera: op=State serial=131271 04:44:40 GetSingleValue result=40 Value=cccccccc 04:44:40 SkyScan query 04:44:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:44:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:40 Parameters OK 04:44:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:40 Set A/D data flow result=40 04:44:40 Set A/D channel type result=40 04:44:40 Set A/D encoding result=40 04:44:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:40 Set channel filter=0.000000e+000 result=40 04:44:40 Config A/D Result=40 04:44:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:40 Get A/D filter: -9.255963e+061 result=40 04:44:40 Get A/D value=-858993460 result=40 04:44:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:40 Parameters OK 04:44:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:40 Set A/D data flow result=40 04:44:40 Set A/D channel type result=40 04:44:40 Set A/D encoding result=40 04:44:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:40 Set channel filter=0.000000e+000 result=40 04:44:40 Config A/D Result=40 04:44:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:40 Get A/D filter: -9.255963e+061 result=40 04:44:40 Get A/D value=-858993460 result=40 04:44:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:40 Aux= 04:44:40 Message to Camera, serial 131271 queued 04:45:16 Received message from Master: op=PointingHead serial=131283 04:45:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:45:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:45:17 Point started: ret=0 04:45:17 point_skyscan result=0 04:45:18 Check angles 04:45:18 SkyScan query 04:45:18 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.22<-16548 Statuses=0009 0009 04:45:18 Msec=0 True Az=63.945 Ze=-68.22 Az status=0009 Ze status=0009 04:45:18 Check angles 04:45:18 SkyScan query 04:45:19 SkyScan query done: ret=0 az=81.405<-5427 ze=-89.22<-17948 Statuses=0009 0009 04:45:19 Msec=750 True Az=81.405 Ze=-89.22 Az status=0009 Ze status=0009 04:45:19 Check angles 04:45:19 SkyScan query 04:45:20 SkyScan query done: ret=0 az=98.775<-6585 ze=-110.16<-19344 Statuses=0009 0009 04:45:20 Msec=1500 True Az=98.775 Ze=-110.16 Az status=0009 Ze status=0009 04:45:20 Check angles 04:45:20 SkyScan query 04:45:20 SkyScan query done: ret=0 az=116.25<-7750 ze=-131.13<-20742 Statuses=0009 0009 04:45:20 Msec=2250 True Az=116.25 Ze=-131.13 Az status=0009 Ze status=0009 04:45:21 Check angles 04:45:21 SkyScan query 04:45:21 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 04:45:21 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 04:45:21 Check angles 04:45:21 SkyScan query 04:45:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 04:45:22 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 04:45:22 Message to Master queued w/err=0: serial=131283 error=0 04:45:27 Received message from Master: op=Identify serial=131284 04:45:27 Received message from Master: op=Filter serial=131287 04:45:27 Color wheel filter change from 0 to 0 04:45:27 FLIGetFilterPos err=0 currentPosition=0 04:45:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:27 Filter is already there-color wheel unchanged 04:45:27 Received message from Master: op=Shutter serial=131288 04:45:27 Shutter LASER close 04:45:27 Received message from Camera: op=State serial=131290 04:45:27 GetSingleValue result=40 Value=cccccccc 04:45:27 SkyScan query 04:45:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:45:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:28 Parameters OK 04:45:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:28 Set A/D data flow result=40 04:45:28 Set A/D channel type result=40 04:45:28 Set A/D encoding result=40 04:45:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:28 Set channel filter=0.000000e+000 result=40 04:45:28 Config A/D Result=40 04:45:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:28 Get A/D filter: -9.255963e+061 result=40 04:45:28 Get A/D value=-858993460 result=40 04:45:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:28 Parameters OK 04:45:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:28 Set A/D data flow result=40 04:45:28 Set A/D channel type result=40 04:45:28 Set A/D encoding result=40 04:45:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:28 Set channel filter=0.000000e+000 result=40 04:45:28 Config A/D Result=40 04:45:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:28 Get A/D filter: -9.255963e+061 result=40 04:45:28 Get A/D value=-858993460 result=40 04:45:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:28 Aux= 04:45:28 Message to Camera, serial 131290 queued 04:46:04 Received message from Master: op=PointingHead serial=131303 04:46:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:46:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:46:05 Point started: ret=0 04:46:05 point_skyscan result=0 04:46:06 Check angles 04:46:06 SkyScan query 04:46:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 04:46:06 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 04:46:06 Check angles 04:46:06 SkyScan query 04:46:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:46:07 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:46:07 Message to Master queued w/err=0: serial=131303 error=0 04:46:12 Received message from Master: op=Filter serial=131304 04:46:12 Color wheel filter change from 0 to 0 04:46:12 FLIGetFilterPos err=0 currentPosition=0 [UTC 2018-12-14 04:46:12] 04:46:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:12 Filter is already there-color wheel unchanged 04:46:12 Received message from Master: op=Shutter serial=131305 04:46:12 Shutter LASER open 04:46:12 Received message from Camera: op=State serial=131307 04:46:12 GetSingleValue result=40 Value=cccccccc 04:46:12 SkyScan query 04:46:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:46:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:13 Parameters OK 04:46:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:13 Set A/D data flow result=40 04:46:13 Set A/D channel type result=40 04:46:13 Set A/D encoding result=40 04:46:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:13 Set channel filter=0.000000e+000 result=40 04:46:13 Config A/D Result=40 04:46:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:13 Get A/D filter: -9.255963e+061 result=40 04:46:13 Get A/D value=-858993460 result=40 04:46:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:13 Parameters OK 04:46:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:13 Set A/D data flow result=40 04:46:13 Set A/D channel type result=40 04:46:13 Set A/D encoding result=40 04:46:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:13 Set channel filter=0.000000e+000 result=40 04:46:13 Config A/D Result=40 04:46:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:13 Get A/D filter: -9.255963e+061 result=40 04:46:13 Get A/D value=-858993460 result=40 04:46:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:13 Aux= 04:46:13 Message to Camera, serial 131307 queued 04:46:21 Received message from Master: op=Shutter serial=131317 04:46:21 Shutter LASER close 04:46:22 Received message from Master: op=PointingHead serial=131321 04:46:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:46:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:46:22 Point started: ret=0 04:46:22 point_skyscan result=0 04:46:23 Check angles 04:46:23 SkyScan query 04:46:24 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.475<-21565 Statuses=0009 0009 04:46:24 Msec=0 True Az=135.885 Ze=-143.475 Az status=0009 Ze status=0009 04:46:24 Check angles 04:46:24 SkyScan query 04:46:24 SkyScan query done: ret=0 az=153.345<-10223 ze=-122.49<-20166 Statuses=0009 0009 04:46:24 Msec=750 True Az=153.345 Ze=-122.49 Az status=0009 Ze status=0009 04:46:25 Check angles 04:46:25 SkyScan query 04:46:25 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.595<-18773 Statuses=0009 0009 04:46:25 Msec=1500 True Az=170.805 Ze=-101.595 Az status=0009 Ze status=0009 04:46:25 Check angles 04:46:25 SkyScan query 04:46:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.565<-17371 Statuses=0008 0009 04:46:26 Msec=2250 True Az=175.995 Ze=-80.565 Az status=0008 Ze status=0009 04:46:26 Check angles 04:46:26 SkyScan query 04:46:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.64<-15976 Statuses=0008 0009 04:46:27 Msec=3000 True Az=176.01 Ze=-59.64 Az status=0008 Ze status=0009 04:46:27 Check angles 04:46:27 SkyScan query 04:46:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:46:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:46:27 Message to Master queued w/err=0: serial=131321 error=0 04:46:32 Received message from Master: op=Filter serial=131322 04:46:32 Color wheel filter change from 0 to 0 04:46:32 FLIGetFilterPos err=0 currentPosition=0 04:46:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:32 Filter is already there-color wheel unchanged 04:46:33 Received message from Master: op=Shutter serial=131323 04:46:33 Shutter LASER close 04:46:33 Received message from Camera: op=State serial=131325 04:46:33 GetSingleValue result=40 Value=cccccccc 04:46:33 SkyScan query 04:46:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:46:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:33 Parameters OK 04:46:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:33 Set A/D data flow result=40 04:46:33 Set A/D channel type result=40 04:46:33 Set A/D encoding result=40 04:46:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:33 Set channel filter=0.000000e+000 result=40 04:46:33 Config A/D Result=40 04:46:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:33 Get A/D filter: -9.255963e+061 result=40 04:46:33 Get A/D value=-858993460 result=40 04:46:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:33 Parameters OK 04:46:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:33 Set A/D data flow result=40 04:46:33 Set A/D channel type result=40 04:46:33 Set A/D encoding result=40 04:46:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:33 Set channel filter=0.000000e+000 result=40 04:46:33 Config A/D Result=40 04:46:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:33 Get A/D filter: -9.255963e+061 result=40 04:46:33 Get A/D value=-858993460 result=40 04:46:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:33 Aux= 04:46:33 Message to Camera, serial 131325 queued 04:47:10 Received message from Master: op=PointingHead serial=131338 04:47:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:47:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:47:10 Point started: ret=0 04:47:10 point_skyscan result=0 04:47:11 Check angles 04:47:11 SkyScan query 04:47:12 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.795<-13453 Statuses=0009 0009 04:47:12 Msec=0 True Az=152.97 Ze=-21.795 Az status=0009 Ze status=0009 04:47:12 Check angles 04:47:12 SkyScan query 04:47:13 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.375<-12025 Statuses=0009 0009 04:47:13 Msec=750 True Az=135.15 Ze=-0.375 Az status=0009 Ze status=0009 04:47:13 Check angles 04:47:13 SkyScan query 04:47:13 SkyScan query done: ret=0 az=117.33<-7822 ze=21.045<-10597 Statuses=0009 0009 04:47:13 Msec=1500 True Az=117.33 Ze=21.045 Az status=0009 Ze status=0009 04:47:13 Check angles 04:47:13 SkyScan query 04:47:14 SkyScan query done: ret=0 az=99.93<-6662 ze=41.955<-9203 Statuses=0009 0009 04:47:14 Msec=2250 True Az=99.93 Ze=41.955 Az status=0009 Ze status=0009 04:47:14 Check angles 04:47:14 SkyScan query 04:47:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 04:47:15 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 04:47:15 Check angles 04:47:15 SkyScan query 04:47:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:47:16 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:47:16 Message to Master queued w/err=0: serial=131338 error=0 04:47:21 Received message from Master: op=Filter serial=131339 04:47:21 Color wheel filter change from 0 to 0 04:47:21 FLIGetFilterPos err=0 currentPosition=0 04:47:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:21 Filter is already there-color wheel unchanged 04:47:21 Received message from Master: op=Shutter serial=131340 04:47:21 Shutter LASER close 04:47:21 Received message from Camera: op=State serial=131342 04:47:21 GetSingleValue result=40 Value=cccccccc 04:47:21 SkyScan query 04:47:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:47:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:21 Parameters OK 04:47:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:21 Set A/D data flow result=40 04:47:21 Set A/D channel type result=40 04:47:21 Set A/D encoding result=40 04:47:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:21 Set channel filter=0.000000e+000 result=40 04:47:21 Config A/D Result=40 04:47:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:21 Get A/D filter: -9.255963e+061 result=40 04:47:21 Get A/D value=-858993460 result=40 04:47:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:21 Parameters OK 04:47:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:21 Set A/D data flow result=40 04:47:21 Set A/D channel type result=40 04:47:21 Set A/D encoding result=40 04:47:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:21 Set channel filter=0.000000e+000 result=40 04:47:21 Config A/D Result=40 04:47:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:21 Get A/D filter: -9.255963e+061 result=40 04:47:21 Get A/D value=-858993460 result=40 04:47:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:21 Aux= 04:47:21 Message to Camera, serial 131342 queued 04:47:58 Received message from Master: op=PointingHead serial=131355 04:47:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:47:58 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:47:59 Point started: ret=0 04:47:59 point_skyscan result=0 04:47:59 Check angles 04:47:59 SkyScan query 04:48:00 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 04:48:00 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 04:48:00 Check angles 04:48:00 SkyScan query 04:48:01 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 04:48:01 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 04:48:01 Check angles 04:48:01 SkyScan query 04:48:01 SkyScan query done: ret=0 az=144.165<-9611 ze=38.505<-9433 Statuses=0009 0008 04:48:01 Msec=1500 True Az=144.165 Ze=38.505 Az status=0009 Ze status=0008 04:48:02 Check angles 04:48:02 SkyScan query 04:48:02 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 04:48:02 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 04:48:02 Check angles 04:48:02 SkyScan query 04:48:03 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:48:03 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:48:03 Check angles 04:48:03 SkyScan query 04:48:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:48:04 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:48:04 Message to Master queued w/err=0: serial=131355 error=0 04:48:09 Received message from Master: op=Filter serial=131356 04:48:09 Color wheel filter change from 0 to 0 04:48:09 FLIGetFilterPos err=0 currentPosition=0 04:48:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:09 Filter is already there-color wheel unchanged 04:48:09 Received message from Master: op=Shutter serial=131357 04:48:09 Shutter LASER close 04:48:09 Received message from Camera: op=State serial=131359 04:48:09 GetSingleValue result=40 Value=cccccccc 04:48:09 SkyScan query 04:48:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:48:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:09 Parameters OK 04:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:09 Set A/D data flow result=40 04:48:09 Set A/D channel type result=40 04:48:09 Set A/D encoding result=40 04:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:09 Set channel filter=0.000000e+000 result=40 04:48:09 Config A/D Result=40 04:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:09 Get A/D filter: -9.255963e+061 result=40 04:48:09 Get A/D value=-858993460 result=40 04:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:09 Parameters OK 04:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:09 Set A/D data flow result=40 04:48:09 Set A/D channel type result=40 04:48:09 Set A/D encoding result=40 04:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:09 Set channel filter=0.000000e+000 result=40 04:48:09 Config A/D Result=40 04:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:09 Get A/D filter: -9.255963e+061 result=40 04:48:09 Get A/D value=-858993460 result=40 04:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:09 Aux= 04:48:09 Message to Camera, serial 131359 queued 04:48:46 Received message from Master: op=PointingHead serial=131372 04:48:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:48:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:48:47 Point started: ret=0 04:48:47 point_skyscan result=0 04:48:47 Check angles 04:48:47 SkyScan query 04:48:48 SkyScan query done: ret=0 az=152.745<-10183 ze=8.31<-11446 Statuses=0009 0009 04:48:48 Msec=0 True Az=152.745 Ze=8.31 Az status=0009 Ze status=0009 04:48:48 Check angles 04:48:48 SkyScan query 04:48:49 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.48<-12832 Statuses=0009 0009 04:48:49 Msec=750 True Az=135.3 Ze=-12.48 Az status=0009 Ze status=0009 04:48:49 Check angles 04:48:49 SkyScan query 04:48:49 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.45<-14230 Statuses=0009 0009 04:48:49 Msec=1500 True Az=117.78 Ze=-33.45 Az status=0009 Ze status=0009 04:48:50 Check angles 04:48:50 SkyScan query 04:48:50 SkyScan query done: ret=0 az=99.885<-6659 ze=-51.57<-15438 Statuses=0009 0009 04:48:50 Msec=2250 True Az=99.885 Ze=-51.57 Az status=0009 Ze status=0009 04:48:50 Check angles 04:48:50 SkyScan query 04:48:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 04:48:51 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 04:48:51 Check angles 04:48:51 SkyScan query 04:48:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:48:52 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:48:52 Message to Master queued w/err=0: serial=131372 error=0 04:48:57 Received message from Master: op=Filter serial=131373 04:48:57 Color wheel filter change from 0 to 0 04:48:57 FLIGetFilterPos err=0 currentPosition=0 04:48:57 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:57 Filter is already there-color wheel unchanged 04:48:57 Received message from Master: op=Shutter serial=131374 04:48:57 Shutter LASER close 04:48:57 Received message from Camera: op=State serial=131376 04:48:57 GetSingleValue result=40 Value=cccccccc 04:48:57 SkyScan query 04:48:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:48:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:57 Parameters OK 04:48:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:57 Set A/D data flow result=40 04:48:57 Set A/D channel type result=40 04:48:57 Set A/D encoding result=40 04:48:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:57 Set channel filter=0.000000e+000 result=40 04:48:57 Config A/D Result=40 04:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:57 Get A/D filter: -9.255963e+061 result=40 04:48:57 Get A/D value=-858993460 result=40 04:48:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:57 Parameters OK 04:48:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:57 Set A/D data flow result=40 04:48:57 Set A/D channel type result=40 04:48:57 Set A/D encoding result=40 04:48:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:57 Set channel filter=0.000000e+000 result=40 04:48:57 Config A/D Result=40 04:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:57 Get A/D filter: -9.255963e+061 result=40 04:48:57 Get A/D value=-858993460 result=40 04:48:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:57 Aux= 04:48:57 Message to Camera, serial 131376 queued 04:49:34 Received message from Master: op=PointingHead serial=131389 04:49:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:49:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:49:35 Point started: ret=0 04:49:35 point_skyscan result=0 04:49:35 Check angles 04:49:35 SkyScan query 04:49:36 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.255<-17417 Statuses=0009 0009 04:49:36 Msec=0 True Az=109.14 Ze=-81.255 Az status=0009 Ze status=0009 04:49:36 Check angles 04:49:36 SkyScan query 04:49:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 04:49:37 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 04:49:37 Check angles 04:49:37 SkyScan query 04:49:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.18<-20212 Statuses=0008 0009 04:49:38 Msec=1500 True Az=112.995 Ze=-123.18 Az status=0008 Ze status=0009 04:49:38 Check angles 04:49:38 SkyScan query 04:49:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.57<-21638 Statuses=0008 0009 04:49:38 Msec=2250 True Az=112.995 Ze=-144.57 Az status=0008 Ze status=0009 04:49:38 Check angles 04:49:38 SkyScan query 04:49:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.51<-23034 Statuses=0008 0009 04:49:39 Msec=3000 True Az=112.995 Ze=-165.51 Az status=0008 Ze status=0009 04:49:39 Check angles 04:49:39 SkyScan query 04:49:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:49:40 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:49:40 Message to Master queued w/err=0: serial=131389 error=0 04:49:45 Received message from Master: op=Filter serial=131390 04:49:45 Color wheel filter change from 0 to 0 04:49:45 FLIGetFilterPos err=0 currentPosition=0 04:49:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:45 Filter is already there-color wheel unchanged 04:49:45 Received message from Master: op=Shutter serial=131391 04:49:45 Shutter LASER open 04:49:45 Received message from Camera: op=State serial=131393 04:49:45 GetSingleValue result=40 Value=cccccccc 04:49:45 SkyScan query 04:49:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:49:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:46 Parameters OK 04:49:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:46 Set A/D data flow result=40 04:49:46 Set A/D channel type result=40 04:49:46 Set A/D encoding result=40 04:49:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:46 Set channel filter=0.000000e+000 result=40 04:49:46 Config A/D Result=40 04:49:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:46 Get A/D filter: -9.255963e+061 result=40 04:49:46 Get A/D value=-858993460 result=40 04:49:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:46 Parameters OK 04:49:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:46 Set A/D data flow result=40 04:49:46 Set A/D channel type result=40 04:49:46 Set A/D encoding result=40 04:49:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:46 Set channel filter=0.000000e+000 result=40 04:49:46 Config A/D Result=40 04:49:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:46 Get A/D filter: -9.255963e+061 result=40 04:49:46 Get A/D value=-858993460 result=40 04:49:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:46 Aux= 04:49:46 Message to Camera, serial 131393 queued 04:49:54 Received message from Master: op=Shutter serial=131403 04:49:54 Shutter LASER close 04:49:55 Received message from Master: op=PointingHead serial=131407 04:49:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:49:55 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:49:55 Point started: ret=0 04:49:55 point_skyscan result=0 04:49:56 Check angles 04:49:56 SkyScan query 04:49:56 SkyScan query done: ret=0 az=89.775<-5985 ze=157.065<-1529 Statuses=0009 0009 04:49:56 Msec=0 True Az=89.775 Ze=157.065 Az status=0009 Ze status=0009 04:49:56 Check angles 04:49:56 SkyScan query 04:49:57 SkyScan query done: ret=0 az=71.85<-4790 ze=135.66<-2956 Statuses=0009 0009 04:49:57 Msec=750 True Az=71.85 Ze=135.66 Az status=0009 Ze status=0009 04:49:57 Check angles 04:49:57 SkyScan query 04:49:58 SkyScan query done: ret=0 az=54.48<-3632 ze=114.675<-4355 Statuses=0009 0009 04:49:58 Msec=1500 True Az=54.48 Ze=114.675 Az status=0009 Ze status=0009 04:49:58 Check angles 04:49:58 SkyScan query 04:49:59 SkyScan query done: ret=0 az=40.995<-2733 ze=93.75<-5750 Statuses=0009 0009 04:49:59 Msec=2250 True Az=40.995 Ze=93.75 Az status=0009 Ze status=0009 04:49:59 Check angles 04:49:59 SkyScan query 04:49:59 SkyScan query done: ret=0 az=40.995<-2733 ze=72.765<-7149 Statuses=0008 0009 04:49:59 Msec=3000 True Az=40.995 Ze=72.765 Az status=0008 Ze status=0009 04:49:59 Check angles 04:49:59 SkyScan query 04:50:00 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 04:50:00 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 04:50:00 Check angles 04:50:00 SkyScan query 04:50:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:50:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:50:01 Message to Master queued w/err=0: serial=131407 error=0 04:50:06 Received message from Master: op=Filter serial=131408 04:50:06 Color wheel filter change from 0 to 0 04:50:06 FLIGetFilterPos err=0 currentPosition=0 04:50:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:06 Filter is already there-color wheel unchanged 04:50:06 Received message from Master: op=Shutter serial=131409 04:50:06 Shutter LASER close 04:50:06 Received message from Camera: op=State serial=131411 04:50:06 GetSingleValue result=40 Value=cccccccc 04:50:06 SkyScan query 04:50:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:50:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:07 Parameters OK 04:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:07 Set A/D data flow result=40 04:50:07 Set A/D channel type result=40 04:50:07 Set A/D encoding result=40 04:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:07 Set channel filter=0.000000e+000 result=40 04:50:07 Config A/D Result=40 04:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:07 Get A/D filter: -9.255963e+061 result=40 04:50:07 Get A/D value=-858993460 result=40 04:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:07 Parameters OK 04:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:07 Set A/D data flow result=40 04:50:07 Set A/D channel type result=40 04:50:07 Set A/D encoding result=40 04:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:07 Set channel filter=0.000000e+000 result=40 04:50:07 Config A/D Result=40 04:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:07 Get A/D filter: -9.255963e+061 result=40 04:50:07 Get A/D value=-858993460 result=40 04:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:07 Aux= 04:50:07 Message to Camera, serial 131411 queued 04:50:44 Received message from Master: op=PointingHead serial=131424 04:50:44 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:50:44 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:50:44 Point started: ret=0 04:50:44 point_skyscan result=0 04:50:45 Check angles 04:50:45 SkyScan query 04:50:45 SkyScan query done: ret=0 az=64.08<-4272 ze=66.57<-7562 Statuses=0009 0008 04:50:45 Msec=0 True Az=64.08 Ze=66.57 Az status=0009 Ze status=0008 04:50:45 Check angles 04:50:45 SkyScan query 04:50:46 SkyScan query done: ret=0 az=81.39<-5426 ze=66.495<-7567 Statuses=0009 0008 04:50:46 Msec=750 True Az=81.39 Ze=66.495 Az status=0009 Ze status=0008 04:50:46 Check angles 04:50:46 SkyScan query 04:50:47 SkyScan query done: ret=0 az=99.375<-6625 ze=66.495<-7567 Statuses=0009 0008 04:50:47 Msec=1500 True Az=99.375 Ze=66.495 Az status=0009 Ze status=0008 04:50:47 Check angles 04:50:47 SkyScan query 04:50:48 SkyScan query done: ret=0 az=116.865<-7791 ze=66.495<-7567 Statuses=0009 0008 04:50:48 Msec=2250 True Az=116.865 Ze=66.495 Az status=0009 Ze status=0008 04:50:48 Check angles 04:50:48 SkyScan query 04:50:48 SkyScan query done: ret=0 az=134.325<-8955 ze=66.495<-7567 Statuses=0009 0008 04:50:48 Msec=3000 True Az=134.325 Ze=66.495 Az status=0009 Ze status=0008 04:50:48 Check angles 04:50:48 SkyScan query 04:50:49 SkyScan query done: ret=0 az=151.605<-10107 ze=66.495<-7567 Statuses=0009 0008 04:50:49 Msec=3750 True Az=151.605 Ze=66.495 Az status=0009 Ze status=0008 04:50:49 Check angles 04:50:49 SkyScan query 04:50:50 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 04:50:50 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 04:50:50 Message to Master queued w/err=0: serial=131424 error=0 04:50:55 Received message from Master: op=Filter serial=131425 04:50:55 Color wheel filter change from 0 to 0 04:50:55 FLIGetFilterPos err=0 currentPosition=0 04:50:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:55 Filter is already there-color wheel unchanged 04:50:55 Received message from Master: op=Shutter serial=131426 04:50:55 Shutter LASER close 04:50:55 Received message from Camera: op=State serial=131428 04:50:55 GetSingleValue result=40 Value=cccccccc 04:50:55 SkyScan query 04:50:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:50:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:56 Parameters OK 04:50:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:56 Set A/D data flow result=40 04:50:56 Set A/D channel type result=40 04:50:56 Set A/D encoding result=40 04:50:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:56 Set channel filter=0.000000e+000 result=40 04:50:56 Config A/D Result=40 04:50:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:56 Get A/D filter: -9.255963e+061 result=40 04:50:56 Get A/D value=-858993460 result=40 04:50:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:56 Parameters OK 04:50:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:56 Set A/D data flow result=40 04:50:56 Set A/D channel type result=40 04:50:56 Set A/D encoding result=40 04:50:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:56 Set channel filter=0.000000e+000 result=40 04:50:56 Config A/D Result=40 04:50:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:56 Get A/D filter: -9.255963e+061 result=40 04:50:56 Get A/D value=-858993460 result=40 04:50:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:56 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:56 Aux= 04:50:56 Message to Camera, serial 131428 queued 04:51:32 Received message from Master: op=PointingHead serial=131441 04:51:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:51:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:51:33 Point started: ret=0 04:51:33 point_skyscan result=0 04:51:33 Check angles 04:51:33 SkyScan query 04:51:34 SkyScan query done: ret=0 az=135.075<-9005 ze=36.795<-9547 Statuses=0009 0009 04:51:34 Msec=0 True Az=135.075 Ze=36.795 Az status=0009 Ze status=0009 04:51:34 Check angles 04:51:34 SkyScan query 04:51:35 SkyScan query done: ret=0 az=117.105<-7807 ze=15.45<-10970 Statuses=0009 0009 04:51:35 Msec=750 True Az=117.105 Ze=15.45 Az status=0009 Ze status=0009 04:51:35 Check angles 04:51:35 SkyScan query 04:51:36 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.535<-12369 Statuses=0009 0009 04:51:36 Msec=1500 True Az=99.78 Ze=-5.535 Az status=0009 Ze status=0009 04:51:36 Check angles 04:51:36 SkyScan query 04:51:36 SkyScan query done: ret=0 az=82.275<-5485 ze=-26.505<-13767 Statuses=0009 0009 04:51:36 Msec=2250 True Az=82.275 Ze=-26.505 Az status=0009 Ze status=0009 04:51:36 Check angles 04:51:36 SkyScan query 04:51:37 SkyScan query done: ret=0 az=64.695<-4313 ze=-38.565<-14571 Statuses=0009 0008 04:51:37 Msec=3000 True Az=64.695 Ze=-38.565 Az status=0009 Ze status=0008 04:51:37 Check angles 04:51:37 SkyScan query 04:51:38 SkyScan query done: ret=0 az=47.25<-3150 ze=-38.535<-14569 Statuses=0009 0008 04:51:38 Msec=3750 True Az=47.25 Ze=-38.535 Az status=0009 Ze status=0008 04:51:38 Check angles 04:51:38 SkyScan query 04:51:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:51:39 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:51:39 Message to Master queued w/err=0: serial=131441 error=0 04:51:44 Received message from Master: op=Filter serial=131442 04:51:44 Color wheel filter change from 0 to 0 04:51:44 FLIGetFilterPos err=0 currentPosition=0 04:51:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:44 Filter is already there-color wheel unchanged 04:51:44 Received message from Master: op=Shutter serial=131443 04:51:44 Shutter LASER close 04:51:44 Received message from Camera: op=State serial=131445 04:51:44 GetSingleValue result=40 Value=cccccccc 04:51:44 SkyScan query 04:51:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:51:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:44 Parameters OK 04:51:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:44 Set A/D data flow result=40 04:51:44 Set A/D channel type result=40 04:51:44 Set A/D encoding result=40 04:51:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:44 Set channel filter=0.000000e+000 result=40 04:51:44 Config A/D Result=40 04:51:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:44 Get A/D filter: -9.255963e+061 result=40 04:51:44 Get A/D value=-858993460 result=40 04:51:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:44 Parameters OK 04:51:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:44 Set A/D data flow result=40 04:51:44 Set A/D channel type result=40 04:51:44 Set A/D encoding result=40 04:51:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:44 Set channel filter=0.000000e+000 result=40 04:51:44 Config A/D Result=40 04:51:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:44 Get A/D filter: -9.255963e+061 result=40 04:51:44 Get A/D value=-858993460 result=40 04:51:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:44 Aux= 04:51:44 Message to Camera, serial 131445 queued 04:52:21 Received message from Master: op=PointingHead serial=131458 04:52:21 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:52:21 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:52:22 Point started: ret=0 04:52:22 point_skyscan result=0 04:52:22 Check angles 04:52:22 SkyScan query 04:52:23 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.445<-16563 Statuses=0009 0009 04:52:23 Msec=0 True Az=64.215 Ze=-68.445 Az status=0009 Ze status=0009 04:52:23 Check angles 04:52:23 SkyScan query 04:52:24 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.43<-17962 Statuses=0009 0009 04:52:24 Msec=750 True Az=81.615 Ze=-89.43 Az status=0009 Ze status=0009 04:52:24 Check angles 04:52:24 SkyScan query 04:52:24 SkyScan query done: ret=0 az=99.075<-6605 ze=-110.355<-19357 Statuses=0009 0009 04:52:24 Msec=1500 True Az=99.075 Ze=-110.355 Az status=0009 Ze status=0009 04:52:25 Check angles 04:52:25 SkyScan query 04:52:25 SkyScan query done: ret=0 az=116.865<-7791 ze=-131.715<-20781 Statuses=0009 0009 04:52:25 Msec=2250 True Az=116.865 Ze=-131.715 Az status=0009 Ze status=0009 04:52:25 Check angles 04:52:25 SkyScan query 04:52:26 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 04:52:26 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 04:52:26 Check angles 04:52:26 SkyScan query 04:52:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 04:52:27 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 04:52:27 Message to Master queued w/err=0: serial=131458 error=0 04:52:32 Received message from Master: op=Filter serial=131459 04:52:32 Color wheel filter change from 0 to 0 04:52:32 FLIGetFilterPos err=0 currentPosition=0 04:52:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:52:32 Filter is already there-color wheel unchanged 04:52:32 Received message from Master: op=Shutter serial=131460 04:52:32 Shutter LASER close 04:52:32 Received message from Camera: op=State serial=131462 04:52:32 GetSingleValue result=40 Value=cccccccc 04:52:32 SkyScan query 04:52:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:52:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:32 Parameters OK 04:52:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:32 Set A/D data flow result=40 04:52:32 Set A/D channel type result=40 04:52:32 Set A/D encoding result=40 04:52:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:32 Set channel filter=0.000000e+000 result=40 04:52:32 Config A/D Result=40 04:52:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:32 Get A/D filter: -9.255963e+061 result=40 04:52:32 Get A/D value=-858993460 result=40 04:52:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:32 Parameters OK 04:52:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:32 Set A/D data flow result=40 04:52:32 Set A/D channel type result=40 04:52:32 Set A/D encoding result=40 04:52:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:32 Set channel filter=0.000000e+000 result=40 04:52:32 Config A/D Result=40 04:52:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:32 Get A/D filter: -9.255963e+061 result=40 04:52:32 Get A/D value=-858993460 result=40 04:52:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:32 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:52:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:52:32 Aux= 04:52:32 Message to Camera, serial 131462 queued 04:53:09 Received message from Master: op=PointingHead serial=131475 04:53:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:53:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:53:10 Point started: ret=0 04:53:10 point_skyscan result=0 04:53:10 Check angles 04:53:10 SkyScan query 04:53:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.36<-23424 Statuses=0009 0009 04:53:11 Msec=0 True Az=113.01 Ze=-171.36 Az status=0009 Ze status=0009 04:53:11 Check angles 04:53:11 SkyScan query 04:53:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:53:12 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:53:12 Message to Master queued w/err=0: serial=131475 error=0 04:53:17 Received message from Master: op=Filter serial=131476 04:53:17 Color wheel filter change from 0 to 0 04:53:17 FLIGetFilterPos err=0 currentPosition=0 04:53:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:17 Filter is already there-color wheel unchanged 04:53:17 Received message from Master: op=Shutter serial=131477 04:53:17 Shutter LASER open 04:53:17 Received message from Camera: op=State serial=131479 04:53:17 GetSingleValue result=40 Value=cccccccc 04:53:17 SkyScan query 04:53:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:53:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:18 Parameters OK 04:53:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:18 Set A/D data flow result=40 04:53:18 Set A/D channel type result=40 04:53:18 Set A/D encoding result=40 04:53:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:18 Set channel filter=0.000000e+000 result=40 04:53:18 Config A/D Result=40 04:53:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:18 Get A/D filter: -9.255963e+061 result=40 04:53:18 Get A/D value=-858993460 result=40 04:53:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:18 Parameters OK 04:53:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:18 Set A/D data flow result=40 04:53:18 Set A/D channel type result=40 04:53:18 Set A/D encoding result=40 04:53:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:18 Set channel filter=0.000000e+000 result=40 04:53:18 Config A/D Result=40 04:53:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:18 Get A/D filter: -9.255963e+061 result=40 04:53:18 Get A/D value=-858993460 result=40 04:53:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:18 Aux= 04:53:18 Message to Camera, serial 131479 queued 04:53:26 Received message from Master: op=Shutter serial=131489 04:53:26 Shutter LASER close 04:53:27 Received message from Master: op=PointingHead serial=131493 04:53:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:53:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:53:27 Point started: ret=0 04:53:27 point_skyscan result=0 04:53:28 Check angles 04:53:28 SkyScan query 04:53:28 SkyScan query done: ret=0 az=135.66<-9044 ze=-143.58<-21572 Statuses=0009 0009 04:53:28 Msec=0 True Az=135.66 Ze=-143.58 Az status=0009 Ze status=0009 04:53:29 Check angles 04:53:29 SkyScan query 04:53:29 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.145<-20143 Statuses=0009 0009 04:53:29 Msec=750 True Az=153.51 Ze=-122.145 Az status=0009 Ze status=0009 04:53:29 Check angles 04:53:29 SkyScan query 04:53:30 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.235<-18749 Statuses=0009 0009 04:53:30 Msec=1500 True Az=171.06 Ze=-101.235 Az status=0009 Ze status=0009 04:53:30 Check angles 04:53:30 SkyScan query 04:53:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.28<-17352 Statuses=0008 0009 04:53:31 Msec=2250 True Az=175.995 Ze=-80.28 Az status=0008 Ze status=0009 04:53:31 Check angles 04:53:31 SkyScan query 04:53:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 04:53:31 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 04:53:32 Check angles 04:53:32 SkyScan query 04:53:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:53:32 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:53:32 Message to Master queued w/err=0: serial=131493 error=0 04:53:37 Received message from Master: op=Filter serial=131494 04:53:37 Color wheel filter change from 0 to 0 04:53:37 FLIGetFilterPos err=0 currentPosition=0 04:53:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:37 Filter is already there-color wheel unchanged 04:53:37 Received message from Master: op=Shutter serial=131495 04:53:37 Shutter LASER close 04:53:37 Received message from Camera: op=State serial=131497 04:53:37 GetSingleValue result=40 Value=cccccccc 04:53:37 SkyScan query 04:53:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:53:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:38 Parameters OK 04:53:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:38 Set A/D data flow result=40 04:53:38 Set A/D channel type result=40 04:53:38 Set A/D encoding result=40 04:53:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:38 Set channel filter=0.000000e+000 result=40 04:53:38 Config A/D Result=40 04:53:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:38 Get A/D filter: -9.255963e+061 result=40 04:53:38 Get A/D value=-858993460 result=40 04:53:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:38 Parameters OK 04:53:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:38 Set A/D data flow result=40 04:53:38 Set A/D channel type result=40 04:53:38 Set A/D encoding result=40 04:53:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:38 Set channel filter=0.000000e+000 result=40 04:53:38 Config A/D Result=40 04:53:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:38 Get A/D filter: -9.255963e+061 result=40 04:53:38 Get A/D value=-858993460 result=40 04:53:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:38 Aux= 04:53:38 Message to Camera, serial 131497 queued 04:54:14 Received message from Master: op=PointingHead serial=131509 04:54:14 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:54:14 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:54:14 Point started: ret=0 04:54:14 point_skyscan result=0 04:54:15 Check angles 04:54:15 SkyScan query 04:54:16 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.735<-13449 Statuses=0009 0009 04:54:16 Msec=0 True Az=152.955 Ze=-21.735 Az status=0009 Ze status=0009 04:54:16 Check angles 04:54:16 SkyScan query 04:54:16 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.3<-12020 Statuses=0009 0009 04:54:16 Msec=750 True Az=135.09 Ze=-0.3 Az status=0009 Ze status=0009 04:54:17 Check angles 04:54:17 SkyScan query 04:54:17 SkyScan query done: ret=0 az=117.555<-7837 ze=20.655<-10623 Statuses=0009 0009 04:54:17 Msec=1500 True Az=117.555 Ze=20.655 Az status=0009 Ze status=0009 04:54:17 Check angles 04:54:17 SkyScan query 04:54:18 SkyScan query done: ret=0 az=100.2<-6680 ze=41.61<-9226 Statuses=0009 0009 04:54:18 Msec=2250 True Az=100.2 Ze=41.61 Az status=0009 Ze status=0009 04:54:18 Check angles 04:54:18 SkyScan query 04:54:19 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 04:54:19 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 04:54:19 Check angles 04:54:19 SkyScan query 04:54:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:54:19 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:54:19 Message to Master queued w/err=0: serial=131509 error=0 04:54:24 Received message from Master: op=Filter serial=131510 04:54:24 Color wheel filter change from 0 to 0 04:54:24 FLIGetFilterPos err=0 currentPosition=0 04:54:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:24 Filter is already there-color wheel unchanged 04:54:25 Received message from Master: op=Shutter serial=131511 04:54:25 Shutter LASER close 04:54:25 Received message from Camera: op=State serial=131513 04:54:25 GetSingleValue result=40 Value=cccccccc 04:54:25 SkyScan query 04:54:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:54:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:25 Parameters OK 04:54:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:25 Set A/D data flow result=40 04:54:25 Set A/D channel type result=40 04:54:25 Set A/D encoding result=40 04:54:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:25 Set channel filter=0.000000e+000 result=40 04:54:25 Config A/D Result=40 04:54:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:25 Get A/D filter: -9.255963e+061 result=40 04:54:25 Get A/D value=-858993460 result=40 04:54:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:25 Parameters OK 04:54:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:25 Set A/D data flow result=40 04:54:25 Set A/D channel type result=40 04:54:25 Set A/D encoding result=40 04:54:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:25 Set channel filter=0.000000e+000 result=40 04:54:25 Config A/D Result=40 04:54:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:25 Get A/D filter: -9.255963e+061 result=40 04:54:25 Get A/D value=-858993460 result=40 04:54:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:25 Aux= 04:54:25 Message to Camera, serial 131513 queued 04:55:02 Received message from Master: op=PointingHead serial=131526 04:55:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:55:02 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:55:02 Point started: ret=0 04:55:02 point_skyscan result=0 04:55:03 Check angles 04:55:03 SkyScan query 04:55:04 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 04:55:04 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 04:55:04 Check angles 04:55:04 SkyScan query 04:55:04 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 04:55:04 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 04:55:05 Check angles 04:55:05 SkyScan query 04:55:05 SkyScan query done: ret=0 az=144.135<-9609 ze=38.505<-9433 Statuses=0009 0008 04:55:05 Msec=1500 True Az=144.135 Ze=38.505 Az status=0009 Ze status=0008 04:55:05 Check angles 04:55:05 SkyScan query 04:55:06 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 04:55:06 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 04:55:06 Check angles 04:55:06 SkyScan query 04:55:07 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:55:07 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:55:07 Check angles 04:55:07 SkyScan query 04:55:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:55:07 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:55:07 Message to Master queued w/err=0: serial=131526 error=0 04:55:12 Received message from Master: op=Filter serial=131527 04:55:12 Color wheel filter change from 0 to 0 04:55:12 FLIGetFilterPos err=0 currentPosition=0 04:55:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:55:12 Filter is already there-color wheel unchanged 04:55:13 Received message from Master: op=Shutter serial=131528 04:55:13 Shutter LASER close 04:55:13 Received message from Camera: op=State serial=131530 04:55:13 GetSingleValue result=40 Value=cccccccc 04:55:13 SkyScan query 04:55:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:55:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:13 Parameters OK 04:55:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:13 Set A/D data flow result=40 04:55:13 Set A/D channel type result=40 04:55:13 Set A/D encoding result=40 04:55:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:13 Set channel filter=0.000000e+000 result=40 04:55:13 Config A/D Result=40 04:55:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:13 Get A/D filter: -9.255963e+061 result=40 04:55:13 Get A/D value=-858993460 result=40 04:55:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:13 Parameters OK 04:55:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:13 Set A/D data flow result=40 04:55:13 Set A/D channel type result=40 04:55:13 Set A/D encoding result=40 04:55:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:13 Set channel filter=0.000000e+000 result=40 04:55:13 Config A/D Result=40 04:55:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:13 Get A/D filter: -9.255963e+061 result=40 04:55:13 Get A/D value=-858993460 result=40 04:55:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:55:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:55:13 Aux= 04:55:13 Message to Camera, serial 131530 queued 04:55:50 Received message from Master: op=PointingHead serial=131543 04:55:50 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:55:50 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:55:50 Point started: ret=0 04:55:50 point_skyscan result=0 04:55:51 Check angles 04:55:51 SkyScan query 04:55:52 SkyScan query done: ret=0 az=152.895<-10193 ze=8.565<-11429 Statuses=0009 0009 04:55:52 Msec=0 True Az=152.895 Ze=8.565 Az status=0009 Ze status=0009 04:55:52 Check angles 04:55:52 SkyScan query 04:55:53 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.375<-12825 Statuses=0009 0009 04:55:53 Msec=750 True Az=135.345 Ze=-12.375 Az status=0009 Ze status=0009 [UTC 2018-12-14 04:55:53] 04:55:53 Check angles 04:55:53 SkyScan query 04:55:53 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.315<-14221 Statuses=0009 0009 04:55:53 Msec=1500 True Az=117.93 Ze=-33.315 Az status=0009 Ze status=0009 04:55:53 Check angles 04:55:53 SkyScan query 04:55:54 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.54<-15436 Statuses=0009 0009 04:55:54 Msec=2250 True Az=100.44 Ze=-51.54 Az status=0009 Ze status=0009 04:55:54 Check angles 04:55:54 SkyScan query 04:55:55 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:55:55 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:55:55 Check angles 04:55:55 SkyScan query 04:55:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:55:56 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:55:56 Message to Master queued w/err=0: serial=131543 error=0 04:56:01 Received message from Master: op=Filter serial=131544 04:56:01 Color wheel filter change from 0 to 0 04:56:01 FLIGetFilterPos err=0 currentPosition=0 04:56:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:01 Filter is already there-color wheel unchanged 04:56:01 Received message from Master: op=Shutter serial=131545 04:56:01 Shutter LASER close 04:56:01 Received message from Camera: op=State serial=131547 04:56:01 GetSingleValue result=40 Value=cccccccc 04:56:01 SkyScan query 04:56:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:56:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:01 Parameters OK 04:56:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:01 Set A/D data flow result=40 04:56:01 Set A/D channel type result=40 04:56:01 Set A/D encoding result=40 04:56:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:01 Set channel filter=0.000000e+000 result=40 04:56:01 Config A/D Result=40 04:56:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:01 Get A/D filter: -9.255963e+061 result=40 04:56:01 Get A/D value=-858993460 result=40 04:56:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:01 Parameters OK 04:56:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:01 Set A/D data flow result=40 04:56:01 Set A/D channel type result=40 04:56:01 Set A/D encoding result=40 04:56:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:01 Set channel filter=0.000000e+000 result=40 04:56:01 Config A/D Result=40 04:56:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:01 Get A/D filter: -9.255963e+061 result=40 04:56:01 Get A/D value=-858993460 result=40 04:56:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:01 Aux= 04:56:01 Message to Camera, serial 131547 queued 04:56:38 Received message from Master: op=PointingHead serial=131560 04:56:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:56:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:56:38 Point started: ret=0 04:56:38 point_skyscan result=0 04:56:39 Check angles 04:56:39 SkyScan query 04:56:40 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.405<-17427 Statuses=0009 0009 04:56:40 Msec=0 True Az=109.14 Ze=-81.405 Az status=0009 Ze status=0009 04:56:40 Check angles 04:56:40 SkyScan query 04:56:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.375<-18825 Statuses=0008 0009 04:56:41 Msec=750 True Az=112.995 Ze=-102.375 Az status=0008 Ze status=0009 04:56:41 Check angles 04:56:41 SkyScan query 04:56:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.33<-20222 Statuses=0008 0009 04:56:41 Msec=1500 True Az=112.995 Ze=-123.33 Az status=0008 Ze status=0009 04:56:41 Check angles 04:56:41 SkyScan query 04:56:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.675<-21645 Statuses=0008 0009 04:56:42 Msec=2250 True Az=112.995 Ze=-144.675 Az status=0008 Ze status=0009 04:56:42 Check angles 04:56:42 SkyScan query 04:56:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 04:56:43 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 04:56:43 Check angles 04:56:43 SkyScan query 04:56:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:56:44 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:56:44 Message to Master queued w/err=0: serial=131560 error=0 04:56:49 Received message from Master: op=Filter serial=131561 04:56:49 Color wheel filter change from 0 to 0 04:56:49 FLIGetFilterPos err=0 currentPosition=0 04:56:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:49 Filter is already there-color wheel unchanged 04:56:49 Received message from Master: op=Shutter serial=131562 04:56:49 Shutter LASER open 04:56:49 Received message from Camera: op=State serial=131564 04:56:49 GetSingleValue result=40 Value=cccccccc 04:56:49 SkyScan query 04:56:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:56:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:50 Parameters OK 04:56:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:50 Set A/D data flow result=40 04:56:50 Set A/D channel type result=40 04:56:50 Set A/D encoding result=40 04:56:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:50 Set channel filter=0.000000e+000 result=40 04:56:50 Config A/D Result=40 04:56:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:50 Get A/D filter: -9.255963e+061 result=40 04:56:50 Get A/D value=-858993460 result=40 04:56:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:50 Parameters OK 04:56:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:50 Set A/D data flow result=40 04:56:50 Set A/D channel type result=40 04:56:50 Set A/D encoding result=40 04:56:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:50 Set channel filter=0.000000e+000 result=40 04:56:50 Config A/D Result=40 04:56:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:50 Get A/D filter: -9.255963e+061 result=40 04:56:50 Get A/D value=-858993460 result=40 04:56:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:50 Aux= 04:56:50 Message to Camera, serial 131564 queued 04:56:58 Received message from Master: op=Shutter serial=131574 04:56:58 Shutter LASER close 04:56:58 Received message from Master: op=PointingHead serial=131578 04:56:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:56:58 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:56:59 Point started: ret=0 04:56:59 point_skyscan result=0 04:56:59 Check angles 04:56:59 SkyScan query 04:57:00 SkyScan query done: ret=0 az=90.135<-6009 ze=157.47<-1502 Statuses=0009 0009 04:57:00 Msec=0 True Az=90.135 Ze=157.47 Az status=0009 Ze status=0009 04:57:00 Check angles 04:57:00 SkyScan query 04:57:01 SkyScan query done: ret=0 az=72.255<-4817 ze=136.065<-2929 Statuses=0009 0009 04:57:01 Msec=750 True Az=72.255 Ze=136.065 Az status=0009 Ze status=0009 04:57:01 Check angles 04:57:01 SkyScan query 04:57:02 SkyScan query done: ret=0 az=54.78<-3652 ze=115.125<-4325 Statuses=0009 0009 04:57:02 Msec=1500 True Az=54.78 Ze=115.125 Az status=0009 Ze status=0009 04:57:02 Check angles 04:57:02 SkyScan query 04:57:02 SkyScan query done: ret=0 az=40.98<-2732 ze=93.72<-5752 Statuses=0009 0009 04:57:02 Msec=2250 True Az=40.98 Ze=93.72 Az status=0009 Ze status=0009 04:57:02 Check angles 04:57:02 SkyScan query 04:57:03 SkyScan query done: ret=0 az=40.995<-2733 ze=72.735<-7151 Statuses=0008 0009 04:57:03 Msec=3000 True Az=40.995 Ze=72.735 Az status=0008 Ze status=0009 04:57:03 Check angles 04:57:03 SkyScan query 04:57:04 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 04:57:04 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 04:57:04 Check angles 04:57:04 SkyScan query 04:57:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:57:05 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:57:05 Message to Master queued w/err=0: serial=131578 error=0 04:57:10 Received message from Master: op=Filter serial=131579 04:57:10 Color wheel filter change from 0 to 0 04:57:10 FLIGetFilterPos err=0 currentPosition=0 04:57:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:10 Filter is already there-color wheel unchanged 04:57:10 Received message from Master: op=Shutter serial=131580 04:57:10 Shutter LASER close 04:57:10 Received message from Camera: op=State serial=131582 04:57:10 GetSingleValue result=40 Value=cccccccc 04:57:10 SkyScan query 04:57:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:57:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:10 Parameters OK 04:57:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:10 Set A/D data flow result=40 04:57:10 Set A/D channel type result=40 04:57:10 Set A/D encoding result=40 04:57:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:10 Set channel filter=0.000000e+000 result=40 04:57:10 Config A/D Result=40 04:57:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:10 Get A/D filter: -9.255963e+061 result=40 04:57:10 Get A/D value=-858993460 result=40 04:57:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:10 Parameters OK 04:57:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:10 Set A/D data flow result=40 04:57:10 Set A/D channel type result=40 04:57:10 Set A/D encoding result=40 04:57:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:10 Set channel filter=0.000000e+000 result=40 04:57:10 Config A/D Result=40 04:57:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:10 Get A/D filter: -9.255963e+061 result=40 04:57:10 Get A/D value=-858993460 result=40 04:57:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:10 Aux= 04:57:10 Message to Camera, serial 131582 queued 04:57:47 Received message from Master: op=PointingHead serial=131595 04:57:47 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:57:47 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:57:48 Point started: ret=0 04:57:48 point_skyscan result=0 04:57:48 Check angles 04:57:48 SkyScan query 04:57:49 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 04:57:49 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 04:57:49 Check angles 04:57:49 SkyScan query 04:57:50 SkyScan query done: ret=0 az=81.885<-5459 ze=66.51<-7566 Statuses=0009 0008 04:57:50 Msec=750 True Az=81.885 Ze=66.51 Az status=0009 Ze status=0008 04:57:50 Check angles 04:57:50 SkyScan query 04:57:51 SkyScan query done: ret=0 az=99.615<-6641 ze=66.495<-7567 Statuses=0009 0008 04:57:51 Msec=1500 True Az=99.615 Ze=66.495 Az status=0009 Ze status=0008 04:57:51 Check angles 04:57:51 SkyScan query 04:57:51 SkyScan query done: ret=0 az=117.15<-7810 ze=66.495<-7567 Statuses=0009 0008 04:57:51 Msec=2250 True Az=117.15 Ze=66.495 Az status=0009 Ze status=0008 04:57:51 Check angles 04:57:51 SkyScan query 04:57:52 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 04:57:52 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 04:57:52 Check angles 04:57:52 SkyScan query 04:57:53 SkyScan query done: ret=0 az=152.07<-10138 ze=66.495<-7567 Statuses=0009 0008 04:57:53 Msec=3750 True Az=152.07 Ze=66.495 Az status=0009 Ze status=0008 04:57:53 Check angles 04:57:53 SkyScan query 04:57:54 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 04:57:54 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 04:57:54 Message to Master queued w/err=0: serial=131595 error=0 04:57:59 Received message from Master: op=Filter serial=131596 04:57:59 Color wheel filter change from 0 to 0 04:57:59 FLIGetFilterPos err=0 currentPosition=0 04:57:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:59 Filter is already there-color wheel unchanged 04:57:59 Received message from Master: op=Shutter serial=131597 04:57:59 Shutter LASER close 04:57:59 Received message from Camera: op=State serial=131599 04:57:59 GetSingleValue result=40 Value=cccccccc 04:57:59 SkyScan query 04:57:59 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:57:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:59 Parameters OK 04:57:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:59 Set A/D data flow result=40 04:57:59 Set A/D channel type result=40 04:57:59 Set A/D encoding result=40 04:57:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:59 Set channel filter=0.000000e+000 result=40 04:57:59 Config A/D Result=40 04:57:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:59 Get A/D filter: -9.255963e+061 result=40 04:57:59 Get A/D value=-858993460 result=40 04:57:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:59 Parameters OK 04:57:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:59 Set A/D data flow result=40 04:57:59 Set A/D channel type result=40 04:57:59 Set A/D encoding result=40 04:57:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:59 Set channel filter=0.000000e+000 result=40 04:57:59 Config A/D Result=40 04:57:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:59 Get A/D filter: -9.255963e+061 result=40 04:57:59 Get A/D value=-858993460 result=40 04:57:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:59 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:59 Aux= 04:57:59 Message to Camera, serial 131599 queued 04:58:36 Received message from Master: op=PointingHead serial=131612 04:58:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:58:36 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:58:36 Point started: ret=0 04:58:36 point_skyscan result=0 04:58:37 Check angles 04:58:37 SkyScan query 04:58:38 SkyScan query done: ret=0 az=135.135<-9009 ze=36.825<-9545 Statuses=0009 0009 04:58:38 Msec=0 True Az=135.135 Ze=36.825 Az status=0009 Ze status=0009 04:58:38 Check angles 04:58:38 SkyScan query 04:58:39 SkyScan query done: ret=0 az=117.57<-7838 ze=15.915<-10939 Statuses=0009 0009 04:58:39 Msec=750 True Az=117.57 Ze=15.915 Az status=0009 Ze status=0009 04:58:39 Check angles 04:58:39 SkyScan query 04:58:39 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.055<-12337 Statuses=0009 0009 04:58:39 Msec=1500 True Az=100.2 Ze=-5.055 Az status=0009 Ze status=0009 04:58:39 Check angles 04:58:39 SkyScan query 04:58:40 SkyScan query done: ret=0 az=82.74<-5516 ze=-26.01<-13734 Statuses=0009 0009 04:58:40 Msec=2250 True Az=82.74 Ze=-26.01 Az status=0009 Ze status=0009 04:58:40 Check angles 04:58:40 SkyScan query 04:58:41 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.58<-14572 Statuses=0009 0008 04:58:41 Msec=3000 True Az=64.86 Ze=-38.58 Az status=0009 Ze status=0008 04:58:41 Check angles 04:58:41 SkyScan query 04:58:42 SkyScan query done: ret=0 az=47.055<-3137 ze=-38.52<-14568 Statuses=0009 0008 04:58:42 Msec=3750 True Az=47.055 Ze=-38.52 Az status=0009 Ze status=0008 04:58:42 Check angles 04:58:42 SkyScan query 04:58:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:58:42 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:58:42 Message to Master queued w/err=0: serial=131612 error=0 04:58:47 Received message from Master: op=Filter serial=131613 04:58:47 Color wheel filter change from 0 to 0 04:58:47 FLIGetFilterPos err=0 currentPosition=0 04:58:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:47 Filter is already there-color wheel unchanged 04:58:48 Received message from Master: op=Shutter serial=131614 04:58:48 Shutter LASER close 04:58:48 Received message from Camera: op=State serial=131616 04:58:48 GetSingleValue result=40 Value=cccccccc 04:58:48 SkyScan query 04:58:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:58:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:48 Parameters OK 04:58:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:48 Set A/D data flow result=40 04:58:48 Set A/D channel type result=40 04:58:48 Set A/D encoding result=40 04:58:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:48 Set channel filter=0.000000e+000 result=40 04:58:48 Config A/D Result=40 04:58:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:48 Get A/D filter: -9.255963e+061 result=40 04:58:48 Get A/D value=-858993460 result=40 04:58:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:48 Parameters OK 04:58:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:48 Set A/D data flow result=40 04:58:48 Set A/D channel type result=40 04:58:48 Set A/D encoding result=40 04:58:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:48 Set channel filter=0.000000e+000 result=40 04:58:48 Config A/D Result=40 04:58:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:48 Get A/D filter: -9.255963e+061 result=40 04:58:48 Get A/D value=-858993460 result=40 04:58:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:48 Aux= 04:58:48 Message to Camera, serial 131616 queued 04:59:24 Received message from Master: op=PointingHead serial=131628 04:59:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:59:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:59:24 Point started: ret=0 04:59:24 point_skyscan result=0 04:59:25 Check angles 04:59:25 SkyScan query 04:59:26 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.1<-16540 Statuses=0009 0009 04:59:26 Msec=0 True Az=63.81 Ze=-68.1 Az status=0009 Ze status=0009 04:59:26 Check angles 04:59:26 SkyScan query 04:59:26 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.1<-17940 Statuses=0009 0009 04:59:26 Msec=750 True Az=81.375 Ze=-89.1 Az status=0009 Ze status=0009 04:59:27 Check angles 04:59:27 SkyScan query 04:59:27 SkyScan query done: ret=0 az=98.835<-6589 ze=-110.01<-19334 Statuses=0009 0009 04:59:27 Msec=1500 True Az=98.835 Ze=-110.01 Az status=0009 Ze status=0009 04:59:27 Check angles 04:59:27 SkyScan query 04:59:28 SkyScan query done: ret=0 az=116.205<-7747 ze=-130.995<-20733 Statuses=0009 0009 04:59:28 Msec=2250 True Az=116.205 Ze=-130.995 Az status=0009 Ze status=0009 04:59:28 Check angles 04:59:28 SkyScan query 04:59:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 04:59:29 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 04:59:29 Check angles 04:59:29 SkyScan query 04:59:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 04:59:29 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 04:59:29 Message to Master queued w/err=0: serial=131628 error=0 04:59:34 Received message from Master: op=Filter serial=131629 04:59:34 Color wheel filter change from 0 to 0 04:59:34 FLIGetFilterPos err=0 currentPosition=0 04:59:34 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:34 Filter is already there-color wheel unchanged 04:59:35 Received message from Master: op=Shutter serial=131630 04:59:35 Shutter LASER close 04:59:35 Received message from Camera: op=State serial=131632 04:59:35 GetSingleValue result=40 Value=cccccccc 04:59:35 SkyScan query 04:59:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:59:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:35 Parameters OK 04:59:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:35 Set A/D data flow result=40 04:59:35 Set A/D channel type result=40 04:59:35 Set A/D encoding result=40 04:59:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:35 Set channel filter=0.000000e+000 result=40 04:59:35 Config A/D Result=40 04:59:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:35 Get A/D filter: -9.255963e+061 result=40 04:59:35 Get A/D value=-858993460 result=40 04:59:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:35 Parameters OK 04:59:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:35 Set A/D data flow result=40 04:59:35 Set A/D channel type result=40 04:59:35 Set A/D encoding result=40 04:59:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:35 Set channel filter=0.000000e+000 result=40 04:59:35 Config A/D Result=40 04:59:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:35 Get A/D filter: -9.255963e+061 result=40 04:59:35 Get A/D value=-858993460 result=40 04:59:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:35 Aux= 04:59:35 Message to Camera, serial 131632 queued 05:00:12 Received message from Master: op=PointingHead serial=131645 05:00:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:00:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:00:12 Point started: ret=0 05:00:12 point_skyscan result=0 05:00:13 Check angles 05:00:13 SkyScan query 05:00:14 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 05:00:14 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 05:00:14 Check angles 05:00:14 SkyScan query 05:00:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:00:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:00:15 Message to Master queued w/err=0: serial=131645 error=0 05:00:20 Received message from Master: op=Filter serial=131646 05:00:20 Color wheel filter change from 0 to 0 05:00:20 FLIGetFilterPos err=0 currentPosition=0 05:00:20 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:20 Filter is already there-color wheel unchanged 05:00:20 Received message from Master: op=Shutter serial=131647 05:00:20 Shutter LASER open 05:00:20 Received message from Camera: op=State serial=131649 05:00:20 GetSingleValue result=40 Value=cccccccc 05:00:20 SkyScan query 05:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:00:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:20 Parameters OK 05:00:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:20 Set A/D data flow result=40 05:00:20 Set A/D channel type result=40 05:00:20 Set A/D encoding result=40 05:00:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:20 Set channel filter=0.000000e+000 result=40 05:00:20 Config A/D Result=40 05:00:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:20 Get A/D filter: -9.255963e+061 result=40 05:00:20 Get A/D value=-858993460 result=40 05:00:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:20 Parameters OK 05:00:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:20 Set A/D data flow result=40 05:00:20 Set A/D channel type result=40 05:00:20 Set A/D encoding result=40 05:00:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:20 Set channel filter=0.000000e+000 result=40 05:00:20 Config A/D Result=40 05:00:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:20 Get A/D filter: -9.255963e+061 result=40 05:00:20 Get A/D value=-858993460 result=40 05:00:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:20 Aux= 05:00:20 Message to Camera, serial 131649 queued 05:00:29 Received message from Master: op=Shutter serial=131659 05:00:29 Shutter LASER close 05:00:30 Received message from Master: op=PointingHead serial=131663 05:00:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:00:30 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:00:30 Point started: ret=0 05:00:30 point_skyscan result=0 05:00:31 Check angles 05:00:31 SkyScan query 05:00:31 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.115<-21541 Statuses=0009 0009 05:00:31 Msec=0 True Az=136.155 Ze=-143.115 Az status=0009 Ze status=0009 05:00:31 Check angles 05:00:31 SkyScan query 05:00:32 SkyScan query done: ret=0 az=154.005<-10267 ze=-121.71<-20114 Statuses=0009 0009 05:00:32 Msec=750 True Az=154.005 Ze=-121.71 Az status=0009 Ze status=0009 05:00:32 Check angles 05:00:32 SkyScan query 05:00:33 SkyScan query done: ret=0 az=171.54<-11436 ze=-100.695<-18713 Statuses=0009 0009 05:00:33 Msec=1500 True Az=171.54 Ze=-100.695 Az status=0009 Ze status=0009 05:00:33 Check angles 05:00:33 SkyScan query 05:00:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.83<-17322 Statuses=0008 0009 05:00:33 Msec=2250 True Az=176.01 Ze=-79.83 Az status=0008 Ze status=0009 05:00:34 Check angles 05:00:34 SkyScan query 05:00:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.815<-15921 Statuses=0008 0009 05:00:34 Msec=3000 True Az=176.01 Ze=-58.815 Az status=0008 Ze status=0009 05:00:34 Check angles 05:00:34 SkyScan query 05:00:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:00:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:00:35 Message to Master queued w/err=0: serial=131663 error=0 05:00:40 Received message from Master: op=Filter serial=131664 05:00:40 Color wheel filter change from 0 to 0 05:00:40 FLIGetFilterPos err=0 currentPosition=0 05:00:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:40 Filter is already there-color wheel unchanged 05:00:40 Received message from Master: op=Shutter serial=131665 05:00:40 Shutter LASER close 05:00:40 Received message from Camera: op=State serial=131667 05:00:40 GetSingleValue result=40 Value=cccccccc 05:00:40 SkyScan query 05:00:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:00:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:41 Parameters OK 05:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:41 Set A/D data flow result=40 05:00:41 Set A/D channel type result=40 05:00:41 Set A/D encoding result=40 05:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:41 Set channel filter=0.000000e+000 result=40 05:00:41 Config A/D Result=40 05:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:41 Get A/D filter: -9.255963e+061 result=40 05:00:41 Get A/D value=-858993460 result=40 05:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:41 Parameters OK 05:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:41 Set A/D data flow result=40 05:00:41 Set A/D channel type result=40 05:00:41 Set A/D encoding result=40 05:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:41 Set channel filter=0.000000e+000 result=40 05:00:41 Config A/D Result=40 05:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:41 Get A/D filter: -9.255963e+061 result=40 05:00:41 Get A/D value=-858993460 result=40 05:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:41 Aux= 05:00:41 Message to Camera, serial 131667 queued 05:01:18 Received message from Master: op=PointingHead serial=131680 05:01:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:01:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:01:18 Point started: ret=0 05:01:18 point_skyscan result=0 05:01:19 Check angles 05:01:19 SkyScan query 05:01:19 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.165<-13411 Statuses=0009 0009 05:01:19 Msec=0 True Az=152.565 Ze=-21.165 Az status=0009 Ze status=0009 05:01:20 Check angles 05:01:20 SkyScan query 05:01:20 SkyScan query done: ret=0 az=134.58<-8972 ze=0.18<-11988 Statuses=0009 0009 05:01:20 Msec=750 True Az=134.58 Ze=0.18 Az status=0009 Ze status=0009 05:01:20 Check angles 05:01:20 SkyScan query 05:01:21 SkyScan query done: ret=0 az=117.105<-7807 ze=21.195<-10587 Statuses=0009 0009 05:01:21 Msec=1500 True Az=117.105 Ze=21.195 Az status=0009 Ze status=0009 05:01:21 Check angles 05:01:21 SkyScan query 05:01:22 SkyScan query done: ret=0 az=99.825<-6655 ze=42.075<-9195 Statuses=0009 0009 05:01:22 Msec=2250 True Az=99.825 Ze=42.075 Az status=0009 Ze status=0009 05:01:22 Check angles 05:01:22 SkyScan query 05:01:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 05:01:22 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 05:01:23 Check angles 05:01:23 SkyScan query 05:01:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:01:23 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:01:23 Message to Master queued w/err=0: serial=131680 error=0 05:01:28 Received message from Master: op=Filter serial=131681 05:01:28 Color wheel filter change from 0 to 0 05:01:28 FLIGetFilterPos err=0 currentPosition=0 05:01:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:28 Filter is already there-color wheel unchanged 05:01:28 Received message from Master: op=Shutter serial=131682 05:01:28 Shutter LASER close 05:01:28 Received message from Camera: op=State serial=131684 05:01:28 GetSingleValue result=40 Value=cccccccc 05:01:28 SkyScan query 05:01:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:01:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:29 Parameters OK 05:01:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:29 Set A/D data flow result=40 05:01:29 Set A/D channel type result=40 05:01:29 Set A/D encoding result=40 05:01:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:29 Set channel filter=0.000000e+000 result=40 05:01:29 Config A/D Result=40 05:01:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:29 Get A/D filter: -9.255963e+061 result=40 05:01:29 Get A/D value=-858993460 result=40 05:01:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:29 Parameters OK 05:01:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:29 Set A/D data flow result=40 05:01:29 Set A/D channel type result=40 05:01:29 Set A/D encoding result=40 05:01:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:29 Set channel filter=0.000000e+000 result=40 05:01:29 Config A/D Result=40 05:01:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:29 Get A/D filter: -9.255963e+061 result=40 05:01:29 Get A/D value=-858993460 result=40 05:01:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:29 Aux= 05:01:29 Message to Camera, serial 131684 queued 05:02:06 Received message from Master: op=PointingHead serial=131697 05:02:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:02:06 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:02:06 Point started: ret=0 05:02:06 point_skyscan result=0 05:02:07 Check angles 05:02:07 SkyScan query 05:02:08 SkyScan query done: ret=0 az=109.32<-7288 ze=38.49<-9434 Statuses=0009 0008 05:02:08 Msec=0 True Az=109.32 Ze=38.49 Az status=0009 Ze status=0008 05:02:08 Check angles 05:02:08 SkyScan query 05:02:08 SkyScan query done: ret=0 az=126.78<-8452 ze=38.505<-9433 Statuses=0009 0008 05:02:08 Msec=750 True Az=126.78 Ze=38.505 Az status=0009 Ze status=0008 05:02:08 Check angles 05:02:08 SkyScan query 05:02:09 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 05:02:09 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 05:02:09 Check angles 05:02:09 SkyScan query 05:02:10 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 05:02:10 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 05:02:10 Check angles 05:02:10 SkyScan query 05:02:11 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:02:11 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:02:11 Check angles 05:02:11 SkyScan query 05:02:11 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:02:11 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:02:11 Message to Master queued w/err=0: serial=131697 error=0 05:02:16 Received message from Master: op=Filter serial=131698 05:02:16 Color wheel filter change from 0 to 0 05:02:16 FLIGetFilterPos err=0 currentPosition=0 05:02:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:02:16 Filter is already there-color wheel unchanged 05:02:16 Received message from Master: op=Shutter serial=131699 05:02:16 Shutter LASER close 05:02:16 Received message from Camera: op=State serial=131701 05:02:16 GetSingleValue result=40 Value=cccccccc 05:02:16 SkyScan query 05:02:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:02:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:17 Parameters OK 05:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:17 Set A/D data flow result=40 05:02:17 Set A/D channel type result=40 05:02:17 Set A/D encoding result=40 05:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:17 Set channel filter=0.000000e+000 result=40 05:02:17 Config A/D Result=40 05:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:17 Get A/D filter: -9.255963e+061 result=40 05:02:17 Get A/D value=-858993460 result=40 05:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:17 Parameters OK 05:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:17 Set A/D data flow result=40 05:02:17 Set A/D channel type result=40 05:02:17 Set A/D encoding result=40 05:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:17 Set channel filter=0.000000e+000 result=40 05:02:17 Config A/D Result=40 05:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:17 Get A/D filter: -9.255963e+061 result=40 05:02:17 Get A/D value=-858993460 result=40 05:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:02:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:02:17 Aux= 05:02:17 Message to Camera, serial 131701 queued 05:02:54 Received message from Master: op=PointingHead serial=131714 05:02:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:02:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:02:54 Point started: ret=0 05:02:54 point_skyscan result=0 05:02:55 Check angles 05:02:55 SkyScan query 05:02:56 SkyScan query done: ret=0 az=152.91<-10194 ze=8.58<-11428 Statuses=0009 0009 05:02:56 Msec=0 True Az=152.91 Ze=8.58 Az status=0009 Ze status=0009 05:02:56 Check angles 05:02:56 SkyScan query 05:02:56 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.36<-12824 Statuses=0009 0009 05:02:56 Msec=750 True Az=135.375 Ze=-12.36 Az status=0009 Ze status=0009 05:02:56 Check angles 05:02:56 SkyScan query 05:02:57 SkyScan query done: ret=0 az=117.945<-7863 ze=-33.33<-14222 Statuses=0009 0009 05:02:57 Msec=1500 True Az=117.945 Ze=-33.33 Az status=0009 Ze status=0009 05:02:57 Check angles 05:02:57 SkyScan query 05:02:58 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.54<-15436 Statuses=0009 0009 05:02:58 Msec=2250 True Az=100.44 Ze=-51.54 Az status=0009 Ze status=0009 05:02:58 Check angles 05:02:58 SkyScan query 05:02:59 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:02:59 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:02:59 Check angles 05:02:59 SkyScan query 05:02:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:02:59 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:02:59 Message to Master queued w/err=0: serial=131714 error=0 05:03:04 Received message from Master: op=Filter serial=131715 05:03:04 Color wheel filter change from 0 to 0 05:03:04 FLIGetFilterPos err=0 currentPosition=0 05:03:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:04 Filter is already there-color wheel unchanged 05:03:04 Received message from Master: op=Shutter serial=131716 05:03:04 Shutter LASER close 05:03:05 Received message from Camera: op=State serial=131718 05:03:05 GetSingleValue result=40 Value=cccccccc 05:03:05 SkyScan query 05:03:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:03:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:05 Parameters OK 05:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:05 Set A/D data flow result=40 05:03:05 Set A/D channel type result=40 05:03:05 Set A/D encoding result=40 05:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:05 Set channel filter=0.000000e+000 result=40 05:03:05 Config A/D Result=40 05:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:05 Get A/D filter: -9.255963e+061 result=40 05:03:05 Get A/D value=-858993460 result=40 05:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:05 Parameters OK 05:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:05 Set A/D data flow result=40 05:03:05 Set A/D channel type result=40 05:03:05 Set A/D encoding result=40 05:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:05 Set channel filter=0.000000e+000 result=40 05:03:05 Config A/D Result=40 05:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:05 Get A/D filter: -9.255963e+061 result=40 05:03:05 Get A/D value=-858993460 result=40 05:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:05 Aux= 05:03:05 Message to Camera, serial 131718 queued 05:03:42 Received message from Master: op=PointingHead serial=131731 05:03:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:03:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:03:42 Point started: ret=0 05:03:42 point_skyscan result=0 05:03:43 Check angles 05:03:43 SkyScan query 05:03:44 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.81<-17454 Statuses=0009 0009 05:03:44 Msec=0 True Az=109.395 Ze=-81.81 Az status=0009 Ze status=0009 05:03:44 Check angles 05:03:44 SkyScan query 05:03:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.155<-18877 Statuses=0008 0009 05:03:44 Msec=750 True Az=112.995 Ze=-103.155 Az status=0008 Ze status=0009 05:03:45 Check angles 05:03:45 SkyScan query 05:03:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.14<-20276 Statuses=0008 0009 05:03:45 Msec=1500 True Az=112.995 Ze=-124.14 Az status=0008 Ze status=0009 05:03:45 Check angles 05:03:45 SkyScan query 05:03:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.05<-21670 Statuses=0008 0009 05:03:46 Msec=2250 True Az=112.995 Ze=-145.05 Az status=0008 Ze status=0009 05:03:46 Check angles 05:03:46 SkyScan query 05:03:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.02<-23068 Statuses=0008 0009 05:03:47 Msec=3000 True Az=112.995 Ze=-166.02 Az status=0008 Ze status=0009 05:03:47 Check angles 05:03:47 SkyScan query 05:03:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:03:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:03:47 Message to Master queued w/err=0: serial=131731 error=0 05:03:52 Received message from Master: op=Filter serial=131732 05:03:52 Color wheel filter change from 0 to 0 05:03:52 FLIGetFilterPos err=0 currentPosition=0 05:03:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:52 Filter is already there-color wheel unchanged 05:03:53 Received message from Master: op=Shutter serial=131733 05:03:53 Shutter LASER open 05:03:53 Received message from Camera: op=State serial=131735 05:03:53 GetSingleValue result=40 Value=cccccccc 05:03:53 SkyScan query 05:03:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:03:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:53 Parameters OK 05:03:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:53 Set A/D data flow result=40 05:03:53 Set A/D channel type result=40 05:03:53 Set A/D encoding result=40 05:03:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:53 Set channel filter=0.000000e+000 result=40 05:03:53 Config A/D Result=40 05:03:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:53 Get A/D filter: -9.255963e+061 result=40 05:03:53 Get A/D value=-858993460 result=40 05:03:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:53 Parameters OK 05:03:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:53 Set A/D data flow result=40 05:03:53 Set A/D channel type result=40 05:03:53 Set A/D encoding result=40 05:03:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:53 Set channel filter=0.000000e+000 result=40 05:03:53 Config A/D Result=40 05:03:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:53 Get A/D filter: -9.255963e+061 result=40 05:03:53 Get A/D value=-858993460 result=40 05:03:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:53 Aux= 05:03:53 Message to Camera, serial 131735 queued 05:04:02 Received message from Master: op=Shutter serial=131745 05:04:02 Shutter LASER close 05:04:02 Received message from Master: op=PointingHead serial=131749 05:04:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:04:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:04:03 Point started: ret=0 05:04:03 point_skyscan result=0 05:04:03 Check angles 05:04:03 SkyScan query 05:04:04 SkyScan query done: ret=0 az=89.625<-5975 ze=156.78<-1548 Statuses=0009 0009 05:04:04 Msec=0 True Az=89.625 Ze=156.78 Az status=0009 Ze status=0009 05:04:04 Check angles 05:04:04 SkyScan query 05:04:05 SkyScan query done: ret=0 az=72.045<-4803 ze=135.885<-2941 Statuses=0009 0009 05:04:05 Msec=750 True Az=72.045 Ze=135.885 Az status=0009 Ze status=0009 05:04:05 Check angles 05:04:05 SkyScan query 05:04:05 SkyScan query done: ret=0 az=54.81<-3654 ze=114.93<-4338 Statuses=0009 0009 05:04:05 Msec=1500 True Az=54.81 Ze=114.93 Az status=0009 Ze status=0009 05:04:06 Check angles 05:04:06 SkyScan query 05:04:06 SkyScan query done: ret=0 az=41.01<-2734 ze=93.54<-5764 Statuses=0009 0009 05:04:06 Msec=2250 True Az=41.01 Ze=93.54 Az status=0009 Ze status=0009 05:04:06 Check angles 05:04:06 SkyScan query 05:04:07 SkyScan query done: ret=0 az=40.98<-2732 ze=72.105<-7193 Statuses=0008 0009 05:04:07 Msec=3000 True Az=40.98 Ze=72.105 Az status=0008 Ze status=0009 05:04:07 Check angles 05:04:07 SkyScan query 05:04:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.11<-8526 Statuses=0008 0009 05:04:08 Msec=3750 True Az=40.995 Ze=52.11 Az status=0008 Ze status=0009 05:04:08 Check angles 05:04:08 SkyScan query 05:04:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:04:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:04:08 Message to Master queued w/err=0: serial=131749 error=0 05:04:13 Received message from Master: op=Filter serial=131750 05:04:13 Color wheel filter change from 0 to 0 05:04:13 FLIGetFilterPos err=0 currentPosition=0 05:04:13 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:13 Filter is already there-color wheel unchanged 05:04:14 Received message from Master: op=Shutter serial=131751 05:04:14 Shutter LASER close 05:04:14 Received message from Camera: op=State serial=131753 05:04:14 GetSingleValue result=40 Value=cccccccc 05:04:14 SkyScan query 05:04:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:04:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:14 Parameters OK 05:04:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:14 Set A/D data flow result=40 05:04:14 Set A/D channel type result=40 05:04:14 Set A/D encoding result=40 05:04:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:14 Set channel filter=0.000000e+000 result=40 05:04:14 Config A/D Result=40 05:04:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:14 Get A/D filter: -9.255963e+061 result=40 05:04:14 Get A/D value=-858993460 result=40 05:04:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:14 Parameters OK 05:04:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:14 Set A/D data flow result=40 05:04:14 Set A/D channel type result=40 05:04:14 Set A/D encoding result=40 05:04:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:14 Set channel filter=0.000000e+000 result=40 05:04:14 Config A/D Result=40 05:04:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:14 Get A/D filter: -9.255963e+061 result=40 05:04:14 Get A/D value=-858993460 result=40 05:04:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:14 Aux= 05:04:14 Message to Camera, serial 131753 queued 05:04:51 Received message from Master: op=PointingHead serial=131766 05:04:51 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:04:51 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:04:52 Point started: ret=0 05:04:52 point_skyscan result=0 05:04:52 Check angles 05:04:52 SkyScan query 05:04:53 SkyScan query done: ret=0 az=64.02<-4268 ze=66.54<-7564 Statuses=0009 0008 05:04:53 Msec=0 True Az=64.02 Ze=66.54 Az status=0009 Ze status=0008 05:04:53 Check angles 05:04:53 SkyScan query 05:04:54 SkyScan query done: ret=0 az=81.315<-5421 ze=66.51<-7566 Statuses=0009 0008 05:04:54 Msec=750 True Az=81.315 Ze=66.51 Az status=0009 Ze status=0008 05:04:54 Check angles 05:04:54 SkyScan query 05:04:54 SkyScan query done: ret=0 az=99.33<-6622 ze=66.495<-7567 Statuses=0009 0008 05:04:54 Msec=1500 True Az=99.33 Ze=66.495 Az status=0009 Ze status=0008 05:04:55 Check angles 05:04:55 SkyScan query 05:04:55 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 05:04:55 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 05:04:55 Check angles 05:04:55 SkyScan query 05:04:56 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 05:04:56 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 05:04:56 Check angles 05:04:56 SkyScan query 05:04:57 SkyScan query done: ret=0 az=151.89<-10126 ze=66.495<-7567 Statuses=0009 0008 05:04:57 Msec=3750 True Az=151.89 Ze=66.495 Az status=0009 Ze status=0008 05:04:57 Check angles 05:04:57 SkyScan query 05:04:57 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 05:04:57 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 05:04:57 Message to Master queued w/err=0: serial=131766 error=0 05:05:02 Received message from Master: op=Filter serial=131767 05:05:02 Color wheel filter change from 0 to 0 05:05:02 FLIGetFilterPos err=0 currentPosition=0 05:05:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:02 Filter is already there-color wheel unchanged 05:05:03 Received message from Master: op=Shutter serial=131768 05:05:03 Shutter LASER close 05:05:03 Received message from Camera: op=State serial=131770 05:05:03 GetSingleValue result=40 Value=cccccccc 05:05:03 SkyScan query 05:05:03 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:05:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:03 Parameters OK 05:05:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:03 Set A/D data flow result=40 05:05:03 Set A/D channel type result=40 05:05:03 Set A/D encoding result=40 05:05:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:03 Set channel filter=0.000000e+000 result=40 05:05:03 Config A/D Result=40 05:05:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:03 Get A/D filter: -9.255963e+061 result=40 05:05:03 Get A/D value=-858993460 result=40 05:05:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:03 Parameters OK 05:05:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:03 Set A/D data flow result=40 05:05:03 Set A/D channel type result=40 05:05:03 Set A/D encoding result=40 05:05:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:03 Set channel filter=0.000000e+000 result=40 05:05:03 Config A/D Result=40 05:05:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:03 Get A/D filter: -9.255963e+061 result=40 05:05:03 Get A/D value=-858993460 result=40 05:05:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:03 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:03 Aux= 05:05:03 Message to Camera, serial 131770 queued 05:05:40 Received message from Master: op=PointingHead serial=131783 05:05:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:05:40 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:05:40 Point started: ret=0 05:05:40 point_skyscan result=0 05:05:41 Check angles 05:05:41 SkyScan query 05:05:42 SkyScan query done: ret=0 az=135.135<-9009 ze=36.84<-9544 Statuses=0009 0009 [UTC 2018-12-14 05:05:42] 05:05:42 Msec=0 True Az=135.135 Ze=36.84 Az status=0009 Ze status=0009 05:05:42 Check angles 05:05:42 SkyScan query 05:05:42 SkyScan query done: ret=0 az=117.69<-7846 ze=15.915<-10939 Statuses=0009 0009 05:05:42 Msec=750 True Az=117.69 Ze=15.915 Az status=0009 Ze status=0009 05:05:43 Check angles 05:05:43 SkyScan query 05:05:43 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.49<-12366 Statuses=0009 0009 05:05:43 Msec=1500 True Az=99.885 Ze=-5.49 Az status=0009 Ze status=0009 05:05:43 Check angles 05:05:43 SkyScan query 05:05:44 SkyScan query done: ret=0 az=82.425<-5495 ze=-26.46<-13764 Statuses=0009 0009 05:05:44 Msec=2250 True Az=82.425 Ze=-26.46 Az status=0009 Ze status=0009 05:05:44 Check angles 05:05:44 SkyScan query 05:05:45 SkyScan query done: ret=0 az=64.905<-4327 ze=-38.565<-14571 Statuses=0009 0008 05:05:45 Msec=3000 True Az=64.905 Ze=-38.565 Az status=0009 Ze status=0008 05:05:45 Check angles 05:05:45 SkyScan query 05:05:45 SkyScan query done: ret=0 az=47.475<-3165 ze=-38.535<-14569 Statuses=0009 0008 05:05:45 Msec=3750 True Az=47.475 Ze=-38.535 Az status=0009 Ze status=0008 05:05:46 Check angles 05:05:46 SkyScan query 05:05:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:05:46 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:05:46 Message to Master queued w/err=0: serial=131783 error=0 05:05:51 Received message from Master: op=Filter serial=131784 05:05:51 Color wheel filter change from 0 to 0 05:05:51 FLIGetFilterPos err=0 currentPosition=0 05:05:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:51 Filter is already there-color wheel unchanged 05:05:51 Received message from Master: op=Shutter serial=131785 05:05:51 Shutter LASER close 05:05:51 Received message from Camera: op=State serial=131787 05:05:51 GetSingleValue result=40 Value=cccccccc 05:05:51 SkyScan query 05:05:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:05:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:52 Parameters OK 05:05:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:52 Set A/D data flow result=40 05:05:52 Set A/D channel type result=40 05:05:52 Set A/D encoding result=40 05:05:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:52 Set channel filter=0.000000e+000 result=40 05:05:52 Config A/D Result=40 05:05:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:52 Get A/D filter: -9.255963e+061 result=40 05:05:52 Get A/D value=-858993460 result=40 05:05:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:52 Parameters OK 05:05:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:52 Set A/D data flow result=40 05:05:52 Set A/D channel type result=40 05:05:52 Set A/D encoding result=40 05:05:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:52 Set channel filter=0.000000e+000 result=40 05:05:52 Config A/D Result=40 05:05:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:52 Get A/D filter: -9.255963e+061 result=40 05:05:52 Get A/D value=-858993460 result=40 05:05:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:52 Aux= 05:05:52 Message to Camera, serial 131787 queued 05:06:29 Received message from Master: op=PointingHead serial=131800 05:06:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:06:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:06:29 Point started: ret=0 05:06:29 point_skyscan result=0 05:06:30 Check angles 05:06:30 SkyScan query 05:06:31 SkyScan query done: ret=0 az=64.395<-4293 ze=-68.745<-16583 Statuses=0009 0009 05:06:31 Msec=0 True Az=64.395 Ze=-68.745 Az status=0009 Ze status=0009 05:06:31 Check angles 05:06:31 SkyScan query 05:06:31 SkyScan query done: ret=0 az=82.29<-5486 ze=-90.105<-18007 Statuses=0009 0009 05:06:31 Msec=750 True Az=82.29 Ze=-90.105 Az status=0009 Ze status=0009 05:06:32 Check angles 05:06:32 SkyScan query 05:06:32 SkyScan query done: ret=0 az=99.645<-6643 ze=-111.075<-19405 Statuses=0009 0009 05:06:32 Msec=1500 True Az=99.645 Ze=-111.075 Az status=0009 Ze status=0009 05:06:32 Check angles 05:06:32 SkyScan query 05:06:33 SkyScan query done: ret=0 az=117.15<-7810 ze=-132<-20800 Statuses=0009 0009 05:06:33 Msec=2250 True Az=117.15 Ze=-132 Az status=0009 Ze status=0009 05:06:33 Check angles 05:06:33 SkyScan query 05:06:34 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 05:06:34 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 05:06:34 Check angles 05:06:34 SkyScan query 05:06:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 05:06:34 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 05:06:34 Message to Master queued w/err=0: serial=131800 error=0 05:06:39 Received message from Master: op=Filter serial=131801 05:06:39 Color wheel filter change from 0 to 0 05:06:39 FLIGetFilterPos err=0 currentPosition=0 05:06:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:39 Filter is already there-color wheel unchanged 05:06:40 Received message from Master: op=Shutter serial=131802 05:06:40 Shutter LASER close 05:06:40 Received message from Camera: op=State serial=131804 05:06:40 GetSingleValue result=40 Value=cccccccc 05:06:40 SkyScan query 05:06:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:06:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:40 Parameters OK 05:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:40 Set A/D data flow result=40 05:06:40 Set A/D channel type result=40 05:06:40 Set A/D encoding result=40 05:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:40 Set channel filter=0.000000e+000 result=40 05:06:40 Config A/D Result=40 05:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:40 Get A/D filter: -9.255963e+061 result=40 05:06:40 Get A/D value=-858993460 result=40 05:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:40 Parameters OK 05:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:40 Set A/D data flow result=40 05:06:40 Set A/D channel type result=40 05:06:40 Set A/D encoding result=40 05:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:40 Set channel filter=0.000000e+000 result=40 05:06:40 Config A/D Result=40 05:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:40 Get A/D filter: -9.255963e+061 result=40 05:06:40 Get A/D value=-858993460 result=40 05:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:40 Aux= 05:06:40 Message to Camera, serial 131804 queued 05:07:17 Received message from Master: op=PointingHead serial=131817 05:07:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:07:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:07:17 Point started: ret=0 05:07:17 point_skyscan result=0 05:07:18 Check angles 05:07:18 SkyScan query 05:07:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 05:07:19 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 05:07:19 Check angles 05:07:19 SkyScan query 05:07:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:07:19 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:07:19 Message to Master queued w/err=0: serial=131817 error=0 05:07:24 Received message from Master: op=Filter serial=131818 05:07:24 Color wheel filter change from 0 to 0 05:07:24 FLIGetFilterPos err=0 currentPosition=0 05:07:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:24 Filter is already there-color wheel unchanged 05:07:25 Received message from Master: op=Shutter serial=131819 05:07:25 Shutter LASER open 05:07:25 Received message from Camera: op=State serial=131821 05:07:25 GetSingleValue result=40 Value=cccccccc 05:07:25 SkyScan query 05:07:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:07:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:25 Parameters OK 05:07:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:25 Set A/D data flow result=40 05:07:25 Set A/D channel type result=40 05:07:25 Set A/D encoding result=40 05:07:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:25 Set channel filter=0.000000e+000 result=40 05:07:25 Config A/D Result=40 05:07:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:25 Get A/D filter: -9.255963e+061 result=40 05:07:25 Get A/D value=-858993460 result=40 05:07:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:25 Parameters OK 05:07:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:25 Set A/D data flow result=40 05:07:25 Set A/D channel type result=40 05:07:25 Set A/D encoding result=40 05:07:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:25 Set channel filter=0.000000e+000 result=40 05:07:25 Config A/D Result=40 05:07:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:25 Get A/D filter: -9.255963e+061 result=40 05:07:25 Get A/D value=-858993460 result=40 05:07:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:25 Aux= 05:07:25 Message to Camera, serial 131821 queued 05:07:34 Received message from Master: op=Shutter serial=131831 05:07:34 Shutter LASER close 05:07:34 Received message from Master: op=PointingHead serial=131835 05:07:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:07:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:07:35 Point started: ret=0 05:07:35 point_skyscan result=0 05:07:35 Check angles 05:07:35 SkyScan query 05:07:36 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.505<-21567 Statuses=0009 0009 05:07:36 Msec=0 True Az=135.72 Ze=-143.505 Az status=0009 Ze status=0009 05:07:36 Check angles 05:07:36 SkyScan query 05:07:37 SkyScan query done: ret=0 az=153.195<-10213 ze=-122.535<-20169 Statuses=0009 0009 05:07:37 Msec=750 True Az=153.195 Ze=-122.535 Az status=0009 Ze status=0009 05:07:37 Check angles 05:07:37 SkyScan query 05:07:38 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.145<-18743 Statuses=0009 0009 05:07:38 Msec=1500 True Az=171.06 Ze=-101.145 Az status=0009 Ze status=0009 05:07:38 Check angles 05:07:38 SkyScan query 05:07:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.74<-17316 Statuses=0008 0009 05:07:38 Msec=2250 True Az=176.01 Ze=-79.74 Az status=0008 Ze status=0009 05:07:38 Check angles 05:07:38 SkyScan query 05:07:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.755<-15917 Statuses=0008 0009 05:07:39 Msec=3000 True Az=176.01 Ze=-58.755 Az status=0008 Ze status=0009 05:07:39 Check angles 05:07:39 SkyScan query 05:07:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:07:40 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:07:40 Message to Master queued w/err=0: serial=131835 error=0 05:07:45 Received message from Master: op=Filter serial=131836 05:07:45 Color wheel filter change from 0 to 0 05:07:45 FLIGetFilterPos err=0 currentPosition=0 05:07:45 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:45 Filter is already there-color wheel unchanged 05:07:45 Received message from Master: op=Shutter serial=131837 05:07:45 Shutter LASER close 05:07:45 Received message from Camera: op=State serial=131839 05:07:45 GetSingleValue result=40 Value=cccccccc 05:07:45 SkyScan query 05:07:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:07:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:46 Parameters OK 05:07:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:46 Set A/D data flow result=40 05:07:46 Set A/D channel type result=40 05:07:46 Set A/D encoding result=40 05:07:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:46 Set channel filter=0.000000e+000 result=40 05:07:46 Config A/D Result=40 05:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:46 Get A/D filter: -9.255963e+061 result=40 05:07:46 Get A/D value=-858993460 result=40 05:07:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:46 Parameters OK 05:07:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:46 Set A/D data flow result=40 05:07:46 Set A/D channel type result=40 05:07:46 Set A/D encoding result=40 05:07:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:46 Set channel filter=0.000000e+000 result=40 05:07:46 Config A/D Result=40 05:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:46 Get A/D filter: -9.255963e+061 result=40 05:07:46 Get A/D value=-858993460 result=40 05:07:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:46 Aux= 05:07:46 Message to Camera, serial 131839 queued 05:08:22 Received message from Master: op=PointingHead serial=131851 05:08:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:08:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:08:22 Point started: ret=0 05:08:22 point_skyscan result=0 05:08:23 Check angles 05:08:23 SkyScan query 05:08:23 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.825<-13455 Statuses=0009 0009 05:08:23 Msec=0 True Az=153.09 Ze=-21.825 Az status=0009 Ze status=0009 05:08:23 Check angles 05:08:23 SkyScan query 05:08:24 SkyScan query done: ret=0 az=135.63<-9042 ze=-0.81<-12054 Statuses=0009 0009 05:08:24 Msec=750 True Az=135.63 Ze=-0.81 Az status=0009 Ze status=0009 05:08:24 Check angles 05:08:24 SkyScan query 05:08:25 SkyScan query done: ret=0 az=118.065<-7871 ze=20.1<-10660 Statuses=0009 0009 05:08:25 Msec=1500 True Az=118.065 Ze=20.1 Az status=0009 Ze status=0009 05:08:25 Check angles 05:08:25 SkyScan query 05:08:26 SkyScan query done: ret=0 az=100.695<-6713 ze=41.1<-9260 Statuses=0009 0009 05:08:26 Msec=2250 True Az=100.695 Ze=41.1 Az status=0009 Ze status=0009 05:08:26 Check angles 05:08:26 SkyScan query 05:08:26 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 05:08:26 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 05:08:26 Check angles 05:08:26 SkyScan query 05:08:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:08:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:08:27 Message to Master queued w/err=0: serial=131851 error=0 05:08:32 Received message from Master: op=Filter serial=131852 05:08:32 Color wheel filter change from 0 to 0 05:08:32 FLIGetFilterPos err=0 currentPosition=0 05:08:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:32 Filter is already there-color wheel unchanged 05:08:32 Received message from Master: op=Shutter serial=131853 05:08:32 Shutter LASER close 05:08:32 Received message from Camera: op=State serial=131855 05:08:32 GetSingleValue result=40 Value=cccccccc 05:08:32 SkyScan query 05:08:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:08:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:33 Parameters OK 05:08:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:33 Set A/D data flow result=40 05:08:33 Set A/D channel type result=40 05:08:33 Set A/D encoding result=40 05:08:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:33 Set channel filter=0.000000e+000 result=40 05:08:33 Config A/D Result=40 05:08:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:33 Get A/D filter: -9.255963e+061 result=40 05:08:33 Get A/D value=-858993460 result=40 05:08:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:33 Parameters OK 05:08:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:33 Set A/D data flow result=40 05:08:33 Set A/D channel type result=40 05:08:33 Set A/D encoding result=40 05:08:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:33 Set channel filter=0.000000e+000 result=40 05:08:33 Config A/D Result=40 05:08:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:33 Get A/D filter: -9.255963e+061 result=40 05:08:33 Get A/D value=-858993460 result=40 05:08:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:33 Aux= 05:08:33 Message to Camera, serial 131855 queued 05:09:10 Received message from Master: op=PointingHead serial=131868 05:09:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:09:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:09:10 Point started: ret=0 05:09:10 point_skyscan result=0 05:09:11 Check angles 05:09:11 SkyScan query 05:09:11 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 05:09:11 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 05:09:12 Check angles 05:09:12 SkyScan query 05:09:12 SkyScan query done: ret=0 az=127.005<-8467 ze=38.505<-9433 Statuses=0009 0008 05:09:12 Msec=750 True Az=127.005 Ze=38.505 Az status=0009 Ze status=0008 05:09:12 Check angles 05:09:12 SkyScan query 05:09:13 SkyScan query done: ret=0 az=144.72<-9648 ze=38.505<-9433 Statuses=0009 0008 05:09:13 Msec=1500 True Az=144.72 Ze=38.505 Az status=0009 Ze status=0008 05:09:13 Check angles 05:09:13 SkyScan query 05:09:14 SkyScan query done: ret=0 az=162.285<-10819 ze=38.505<-9433 Statuses=0009 0008 05:09:14 Msec=2250 True Az=162.285 Ze=38.505 Az status=0009 Ze status=0008 05:09:14 Check angles 05:09:14 SkyScan query 05:09:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 05:09:14 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 05:09:15 Check angles 05:09:15 SkyScan query 05:09:15 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:09:15 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:09:15 Message to Master queued w/err=0: serial=131868 error=0 05:09:20 Received message from Master: op=Filter serial=131869 05:09:20 Color wheel filter change from 0 to 0 05:09:20 FLIGetFilterPos err=0 currentPosition=0 05:09:20 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:20 Filter is already there-color wheel unchanged 05:09:20 Received message from Master: op=Shutter serial=131870 05:09:20 Shutter LASER close 05:09:20 Received message from Camera: op=State serial=131872 05:09:20 GetSingleValue result=40 Value=cccccccc 05:09:20 SkyScan query 05:09:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:09:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:21 Parameters OK 05:09:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:21 Set A/D data flow result=40 05:09:21 Set A/D channel type result=40 05:09:21 Set A/D encoding result=40 05:09:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:21 Set channel filter=0.000000e+000 result=40 05:09:21 Config A/D Result=40 05:09:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:21 Get A/D filter: -9.255963e+061 result=40 05:09:21 Get A/D value=-858993460 result=40 05:09:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:21 Parameters OK 05:09:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:21 Set A/D data flow result=40 05:09:21 Set A/D channel type result=40 05:09:21 Set A/D encoding result=40 05:09:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:21 Set channel filter=0.000000e+000 result=40 05:09:21 Config A/D Result=40 05:09:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:21 Get A/D filter: -9.255963e+061 result=40 05:09:21 Get A/D value=-858993460 result=40 05:09:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:21 Aux= 05:09:21 Message to Camera, serial 131872 queued 05:09:58 Received message from Master: op=PointingHead serial=131885 05:09:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:09:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:09:58 Point started: ret=0 05:09:58 point_skyscan result=0 05:09:59 Check angles 05:09:59 SkyScan query 05:10:00 SkyScan query done: ret=0 az=153.09<-10206 ze=8.805<-11413 Statuses=0009 0009 05:10:00 Msec=0 True Az=153.09 Ze=8.805 Az status=0009 Ze status=0009 05:10:00 Check angles 05:10:00 SkyScan query 05:10:00 SkyScan query done: ret=0 az=135.63<-9042 ze=-12.165<-12811 Statuses=0009 0009 05:10:00 Msec=750 True Az=135.63 Ze=-12.165 Az status=0009 Ze status=0009 05:10:00 Check angles 05:10:00 SkyScan query 05:10:01 SkyScan query done: ret=0 az=118.08<-7872 ze=-33.09<-14206 Statuses=0009 0009 05:10:01 Msec=1500 True Az=118.08 Ze=-33.09 Az status=0009 Ze status=0009 05:10:01 Check angles 05:10:01 SkyScan query 05:10:02 SkyScan query done: ret=0 az=100.695<-6713 ze=-51.525<-15435 Statuses=0009 0009 05:10:02 Msec=2250 True Az=100.695 Ze=-51.525 Az status=0009 Ze status=0009 05:10:02 Check angles 05:10:02 SkyScan query 05:10:03 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 05:10:03 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 05:10:03 Check angles 05:10:03 SkyScan query 05:10:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:10:03 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:10:03 Message to Master queued w/err=0: serial=131885 error=0 05:10:08 Received message from Master: op=Filter serial=131886 05:10:08 Color wheel filter change from 0 to 0 05:10:08 FLIGetFilterPos err=0 currentPosition=0 05:10:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:08 Filter is already there-color wheel unchanged 05:10:08 Received message from Master: op=Shutter serial=131887 05:10:08 Shutter LASER close 05:10:09 Received message from Camera: op=State serial=131889 05:10:09 GetSingleValue result=40 Value=cccccccc 05:10:09 SkyScan query 05:10:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:10:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:09 Parameters OK 05:10:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:09 Set A/D data flow result=40 05:10:09 Set A/D channel type result=40 05:10:09 Set A/D encoding result=40 05:10:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:09 Set channel filter=0.000000e+000 result=40 05:10:09 Config A/D Result=40 05:10:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:09 Get A/D filter: -9.255963e+061 result=40 05:10:09 Get A/D value=-858993460 result=40 05:10:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:09 Parameters OK 05:10:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:09 Set A/D data flow result=40 05:10:09 Set A/D channel type result=40 05:10:09 Set A/D encoding result=40 05:10:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:09 Set channel filter=0.000000e+000 result=40 05:10:09 Config A/D Result=40 05:10:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:09 Get A/D filter: -9.255963e+061 result=40 05:10:09 Get A/D value=-858993460 result=40 05:10:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:09 Aux= 05:10:09 Message to Camera, serial 131889 queued 05:10:46 Received message from Master: op=PointingHead serial=131902 05:10:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:10:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:10:46 Point started: ret=0 05:10:46 point_skyscan result=0 05:10:47 Check angles 05:10:47 SkyScan query 05:10:48 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.84<-17456 Statuses=0009 0009 05:10:48 Msec=0 True Az=109.38 Ze=-81.84 Az status=0009 Ze status=0009 05:10:48 Check angles 05:10:48 SkyScan query 05:10:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 05:10:48 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 05:10:49 Check angles 05:10:49 SkyScan query 05:10:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.72<-20248 Statuses=0008 0009 05:10:49 Msec=1500 True Az=112.995 Ze=-123.72 Az status=0008 Ze status=0009 05:10:49 Check angles 05:10:49 SkyScan query 05:10:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 05:10:50 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 05:10:50 Check angles 05:10:50 SkyScan query 05:10:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.615<-23041 Statuses=0008 0009 05:10:51 Msec=3000 True Az=112.995 Ze=-165.615 Az status=0008 Ze status=0009 05:10:51 Check angles 05:10:51 SkyScan query 05:10:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:10:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:10:51 Message to Master queued w/err=0: serial=131902 error=0 05:10:56 Received message from Master: op=Filter serial=131903 05:10:56 Color wheel filter change from 0 to 0 05:10:56 FLIGetFilterPos err=0 currentPosition=0 05:10:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:56 Filter is already there-color wheel unchanged 05:10:57 Received message from Master: op=Shutter serial=131904 05:10:57 Shutter LASER open 05:10:57 Received message from Camera: op=State serial=131906 05:10:57 GetSingleValue result=40 Value=cccccccc 05:10:57 SkyScan query 05:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:10:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:57 Parameters OK 05:10:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:57 Set A/D data flow result=40 05:10:57 Set A/D channel type result=40 05:10:57 Set A/D encoding result=40 05:10:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:57 Set channel filter=0.000000e+000 result=40 05:10:57 Config A/D Result=40 05:10:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:57 Get A/D filter: -9.255963e+061 result=40 05:10:57 Get A/D value=-858993460 result=40 05:10:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:57 Parameters OK 05:10:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:57 Set A/D data flow result=40 05:10:57 Set A/D channel type result=40 05:10:57 Set A/D encoding result=40 05:10:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:57 Set channel filter=0.000000e+000 result=40 05:10:57 Config A/D Result=40 05:10:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:57 Get A/D filter: -9.255963e+061 result=40 05:10:57 Get A/D value=-858993460 result=40 05:10:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:57 Aux= 05:10:57 Message to Camera, serial 131906 queued 05:11:06 Received message from Master: op=Shutter serial=131916 05:11:06 Shutter LASER close 05:11:06 Received message from Master: op=PointingHead serial=131920 05:11:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:11:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:11:07 Point started: ret=0 05:11:07 point_skyscan result=0 05:11:07 Check angles 05:11:07 SkyScan query 05:11:08 SkyScan query done: ret=0 az=89.505<-5967 ze=156.735<-1551 Statuses=0009 0009 05:11:08 Msec=0 True Az=89.505 Ze=156.735 Az status=0009 Ze status=0009 05:11:08 Check angles 05:11:08 SkyScan query 05:11:09 SkyScan query done: ret=0 az=72.045<-4803 ze=135.81<-2946 Statuses=0009 0009 05:11:09 Msec=750 True Az=72.045 Ze=135.81 Az status=0009 Ze status=0009 05:11:09 Check angles 05:11:09 SkyScan query 05:11:09 SkyScan query done: ret=0 az=54.69<-3646 ze=114.825<-4345 Statuses=0009 0009 05:11:09 Msec=1500 True Az=54.69 Ze=114.825 Az status=0009 Ze status=0009 05:11:10 Check angles 05:11:10 SkyScan query 05:11:10 SkyScan query done: ret=0 az=41.01<-2734 ze=93.87<-5742 Statuses=0009 0009 05:11:10 Msec=2250 True Az=41.01 Ze=93.87 Az status=0009 Ze status=0009 05:11:10 Check angles 05:11:10 SkyScan query 05:11:11 SkyScan query done: ret=0 az=40.995<-2733 ze=72.885<-7141 Statuses=0008 0009 05:11:11 Msec=3000 True Az=40.995 Ze=72.885 Az status=0008 Ze status=0009 05:11:11 Check angles 05:11:11 SkyScan query 05:11:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 05:11:12 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 05:11:12 Check angles 05:11:12 SkyScan query 05:11:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:11:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:11:12 Message to Master queued w/err=0: serial=131920 error=0 05:11:17 Received message from Master: op=Filter serial=131921 05:11:17 Color wheel filter change from 0 to 0 05:11:17 FLIGetFilterPos err=0 currentPosition=0 05:11:17 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:17 Filter is already there-color wheel unchanged 05:11:18 Received message from Master: op=Shutter serial=131922 05:11:18 Shutter LASER close 05:11:18 Received message from Camera: op=State serial=131924 05:11:18 GetSingleValue result=40 Value=cccccccc 05:11:18 SkyScan query 05:11:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:11:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:18 Parameters OK 05:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:18 Set A/D data flow result=40 05:11:18 Set A/D channel type result=40 05:11:18 Set A/D encoding result=40 05:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:18 Set channel filter=0.000000e+000 result=40 05:11:18 Config A/D Result=40 05:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:18 Get A/D filter: -9.255963e+061 result=40 05:11:18 Get A/D value=-858993460 result=40 05:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:18 Parameters OK 05:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:18 Set A/D data flow result=40 05:11:18 Set A/D channel type result=40 05:11:18 Set A/D encoding result=40 05:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:18 Set channel filter=0.000000e+000 result=40 05:11:18 Config A/D Result=40 05:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:18 Get A/D filter: -9.255963e+061 result=40 05:11:18 Get A/D value=-858993460 result=40 05:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:18 Aux= 05:11:18 Message to Camera, serial 131924 queued 05:11:55 Received message from Master: op=PointingHead serial=131937 05:11:55 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:11:55 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:11:55 Point started: ret=0 05:11:55 point_skyscan result=0 05:11:56 Check angles 05:11:56 SkyScan query 05:11:57 SkyScan query done: ret=0 az=64.02<-4268 ze=66.54<-7564 Statuses=0009 0008 05:11:57 Msec=0 True Az=64.02 Ze=66.54 Az status=0009 Ze status=0008 05:11:57 Check angles 05:11:57 SkyScan query 05:11:58 SkyScan query done: ret=0 az=81.405<-5427 ze=66.495<-7567 Statuses=0009 0008 05:11:58 Msec=750 True Az=81.405 Ze=66.495 Az status=0009 Ze status=0008 05:11:58 Check angles 05:11:58 SkyScan query 05:11:58 SkyScan query done: ret=0 az=99.36<-6624 ze=66.495<-7567 Statuses=0009 0008 05:11:58 Msec=1500 True Az=99.36 Ze=66.495 Az status=0009 Ze status=0008 05:11:58 Check angles 05:11:58 SkyScan query 05:11:59 SkyScan query done: ret=0 az=116.85<-7790 ze=66.495<-7567 Statuses=0009 0008 05:11:59 Msec=2250 True Az=116.85 Ze=66.495 Az status=0009 Ze status=0008 05:11:59 Check angles 05:11:59 SkyScan query 05:12:00 SkyScan query done: ret=0 az=134.385<-8959 ze=66.495<-7567 Statuses=0009 0008 05:12:00 Msec=3000 True Az=134.385 Ze=66.495 Az status=0009 Ze status=0008 05:12:00 Check angles 05:12:00 SkyScan query 05:12:01 SkyScan query done: ret=0 az=151.995<-10133 ze=66.495<-7567 Statuses=0009 0008 05:12:01 Msec=3750 True Az=151.995 Ze=66.495 Az status=0009 Ze status=0008 05:12:01 Check angles 05:12:01 SkyScan query 05:12:01 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 05:12:01 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 05:12:01 Message to Master queued w/err=0: serial=131937 error=0 05:12:06 Received message from Master: op=Filter serial=131938 05:12:06 Color wheel filter change from 0 to 0 05:12:06 FLIGetFilterPos err=0 currentPosition=0 05:12:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:06 Filter is already there-color wheel unchanged 05:12:07 Received message from Master: op=Shutter serial=131939 05:12:07 Shutter LASER close 05:12:07 Received message from Camera: op=State serial=131941 05:12:07 GetSingleValue result=40 Value=cccccccc 05:12:07 SkyScan query 05:12:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:12:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:07 Parameters OK 05:12:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:07 Set A/D data flow result=40 05:12:07 Set A/D channel type result=40 05:12:07 Set A/D encoding result=40 05:12:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:07 Set channel filter=0.000000e+000 result=40 05:12:07 Config A/D Result=40 05:12:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:07 Get A/D filter: -9.255963e+061 result=40 05:12:07 Get A/D value=-858993460 result=40 05:12:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:07 Parameters OK 05:12:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:07 Set A/D data flow result=40 05:12:07 Set A/D channel type result=40 05:12:07 Set A/D encoding result=40 05:12:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:07 Set channel filter=0.000000e+000 result=40 05:12:07 Config A/D Result=40 05:12:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:07 Get A/D filter: -9.255963e+061 result=40 05:12:07 Get A/D value=-858993460 result=40 05:12:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:07 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:07 Aux= 05:12:07 Message to Camera, serial 131941 queued 05:12:44 Received message from Master: op=PointingHead serial=131954 05:12:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:12:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:12:44 Point started: ret=0 05:12:44 point_skyscan result=0 05:12:45 Check angles 05:12:45 SkyScan query 05:12:46 SkyScan query done: ret=0 az=134.715<-8981 ze=36.405<-9573 Statuses=0009 0009 05:12:46 Msec=0 True Az=134.715 Ze=36.405 Az status=0009 Ze status=0009 05:12:46 Check angles 05:12:46 SkyScan query 05:12:46 SkyScan query done: ret=0 az=116.88<-7792 ze=14.97<-11002 Statuses=0009 0009 05:12:46 Msec=750 True Az=116.88 Ze=14.97 Az status=0009 Ze status=0009 05:12:47 Check angles 05:12:47 SkyScan query 05:12:47 SkyScan query done: ret=0 az=99.48<-6632 ze=-5.985<-12399 Statuses=0009 0009 05:12:47 Msec=1500 True Az=99.48 Ze=-5.985 Az status=0009 Ze status=0009 05:12:47 Check angles 05:12:47 SkyScan query 05:12:48 SkyScan query done: ret=0 az=82.02<-5468 ze=-27.06<-13804 Statuses=0009 0009 05:12:48 Msec=2250 True Az=82.02 Ze=-27.06 Az status=0009 Ze status=0009 05:12:48 Check angles 05:12:48 SkyScan query 05:12:49 SkyScan query done: ret=0 az=64.53<-4302 ze=-38.58<-14572 Statuses=0009 0008 05:12:49 Msec=3000 True Az=64.53 Ze=-38.58 Az status=0009 Ze status=0008 05:12:49 Check angles 05:12:49 SkyScan query 05:12:49 SkyScan query done: ret=0 az=47.07<-3138 ze=-38.52<-14568 Statuses=0009 0008 05:12:49 Msec=3750 True Az=47.07 Ze=-38.52 Az status=0009 Ze status=0008 05:12:50 Check angles 05:12:50 SkyScan query 05:12:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:12:50 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:12:50 Message to Master queued w/err=0: serial=131954 error=0 05:12:55 Received message from Master: op=Filter serial=131955 05:12:55 Color wheel filter change from 0 to 0 05:12:55 FLIGetFilterPos err=0 currentPosition=0 05:12:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:55 Filter is already there-color wheel unchanged 05:12:55 Received message from Master: op=Shutter serial=131956 05:12:55 Shutter LASER close 05:12:55 Received message from Camera: op=State serial=131958 05:12:55 GetSingleValue result=40 Value=cccccccc 05:12:55 SkyScan query 05:12:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:12:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:56 Parameters OK 05:12:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:56 Set A/D data flow result=40 05:12:56 Set A/D channel type result=40 05:12:56 Set A/D encoding result=40 05:12:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:56 Set channel filter=0.000000e+000 result=40 05:12:56 Config A/D Result=40 05:12:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:56 Get A/D filter: -9.255963e+061 result=40 05:12:56 Get A/D value=-858993460 result=40 05:12:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:56 Parameters OK 05:12:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:56 Set A/D data flow result=40 05:12:56 Set A/D channel type result=40 05:12:56 Set A/D encoding result=40 05:12:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:56 Set channel filter=0.000000e+000 result=40 05:12:56 Config A/D Result=40 05:12:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:56 Get A/D filter: -9.255963e+061 result=40 05:12:56 Get A/D value=-858993460 result=40 05:12:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:56 Aux= 05:12:56 Message to Camera, serial 131958 queued 05:13:32 Received message from Master: op=PointingHead serial=131970 05:13:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:13:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:13:32 Point started: ret=0 05:13:32 point_skyscan result=0 05:13:33 Check angles 05:13:33 SkyScan query 05:13:34 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.1<-16540 Statuses=0009 0009 05:13:34 Msec=0 True Az=63.81 Ze=-68.1 Az status=0009 Ze status=0009 05:13:34 Check angles 05:13:34 SkyScan query 05:13:34 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.535<-17969 Statuses=0009 0009 05:13:34 Msec=750 True Az=81.615 Ze=-89.535 Az status=0009 Ze status=0009 05:13:35 Check angles 05:13:35 SkyScan query 05:13:35 SkyScan query done: ret=0 az=99.57<-6638 ze=-110.925<-19395 Statuses=0009 0009 05:13:35 Msec=1500 True Az=99.57 Ze=-110.925 Az status=0009 Ze status=0009 05:13:35 Check angles 05:13:35 SkyScan query 05:13:36 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.835<-20789 Statuses=0009 0009 05:13:36 Msec=2250 True Az=117.045 Ze=-131.835 Az status=0009 Ze status=0009 05:13:36 Check angles 05:13:36 SkyScan query 05:13:37 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 05:13:37 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 05:13:37 Check angles 05:13:37 SkyScan query 05:13:37 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:13:37 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:13:37 Message to Master queued w/err=0: serial=131970 error=0 05:13:42 Received message from Master: op=Filter serial=131971 05:13:42 Color wheel filter change from 0 to 0 05:13:42 FLIGetFilterPos err=0 currentPosition=0 05:13:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:42 Filter is already there-color wheel unchanged 05:13:43 Received message from Master: op=Shutter serial=131972 05:13:43 Shutter LASER close 05:13:43 Received message from Camera: op=State serial=131974 05:13:43 GetSingleValue result=40 Value=cccccccc 05:13:43 SkyScan query 05:13:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:13:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:43 Parameters OK 05:13:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:43 Set A/D data flow result=40 05:13:43 Set A/D channel type result=40 05:13:43 Set A/D encoding result=40 05:13:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:43 Set channel filter=0.000000e+000 result=40 05:13:43 Config A/D Result=40 05:13:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:43 Get A/D filter: -9.255963e+061 result=40 05:13:43 Get A/D value=-858993460 result=40 05:13:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:43 Parameters OK 05:13:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:43 Set A/D data flow result=40 05:13:43 Set A/D channel type result=40 05:13:43 Set A/D encoding result=40 05:13:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:43 Set channel filter=0.000000e+000 result=40 05:13:43 Config A/D Result=40 05:13:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:43 Get A/D filter: -9.255963e+061 result=40 05:13:43 Get A/D value=-858993460 result=40 05:13:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:43 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:43 Aux= 05:13:43 Message to Camera, serial 131974 queued 05:14:20 Received message from Master: op=PointingHead serial=131987 05:14:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:14:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:14:20 Point started: ret=0 05:14:20 point_skyscan result=0 05:14:21 Check angles 05:14:21 SkyScan query 05:14:22 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.405<-23427 Statuses=0009 0009 05:14:22 Msec=0 True Az=113.01 Ze=-171.405 Az status=0009 Ze status=0009 05:14:22 Check angles 05:14:22 SkyScan query 05:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:14:22 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:14:22 Message to Master queued w/err=0: serial=131987 error=0 05:14:27 Received message from Master: op=Filter serial=131988 05:14:27 Color wheel filter change from 0 to 0 05:14:27 FLIGetFilterPos err=0 currentPosition=0 05:14:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:27 Filter is already there-color wheel unchanged 05:14:28 Received message from Master: op=Shutter serial=131989 05:14:28 Shutter LASER open 05:14:28 Received message from Camera: op=State serial=131991 05:14:28 GetSingleValue result=40 Value=cccccccc 05:14:28 SkyScan query 05:14:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:14:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:28 Parameters OK 05:14:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:28 Set A/D data flow result=40 05:14:28 Set A/D channel type result=40 05:14:28 Set A/D encoding result=40 05:14:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:28 Set channel filter=0.000000e+000 result=40 05:14:28 Config A/D Result=40 05:14:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:28 Get A/D filter: -9.255963e+061 result=40 05:14:28 Get A/D value=-858993460 result=40 05:14:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:28 Parameters OK 05:14:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:28 Set A/D data flow result=40 05:14:28 Set A/D channel type result=40 05:14:28 Set A/D encoding result=40 05:14:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:28 Set channel filter=0.000000e+000 result=40 05:14:28 Config A/D Result=40 05:14:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:28 Get A/D filter: -9.255963e+061 result=40 05:14:28 Get A/D value=-858993460 result=40 05:14:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:28 Aux= 05:14:28 Message to Camera, serial 131991 queued 05:14:37 Received message from Master: op=Shutter serial=132001 05:14:37 Shutter LASER close 05:14:37 Received message from Master: op=PointingHead serial=132005 05:14:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:14:37 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:14:38 Point started: ret=0 05:14:38 point_skyscan result=0 05:14:38 Check angles 05:14:38 SkyScan query 05:14:39 SkyScan query done: ret=0 az=136.035<-9069 ze=-143.19<-21546 Statuses=0009 0009 05:14:39 Msec=0 True Az=136.035 Ze=-143.19 Az status=0009 Ze status=0009 05:14:39 Check angles 05:14:39 SkyScan query 05:14:40 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.235<-20149 Statuses=0009 0009 05:14:40 Msec=750 True Az=153.435 Ze=-122.235 Az status=0009 Ze status=0009 05:14:40 Check angles 05:14:40 SkyScan query 05:14:41 SkyScan query done: ret=0 az=171.33<-11422 ze=-100.8<-18720 Statuses=0009 0009 05:14:41 Msec=1500 True Az=171.33 Ze=-100.8 Az status=0009 Ze status=0009 05:14:41 Check angles 05:14:41 SkyScan query 05:14:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.425<-17295 Statuses=0008 0009 05:14:41 Msec=2250 True Az=176.01 Ze=-79.425 Az status=0008 Ze status=0009 05:14:42 Check angles 05:14:42 SkyScan query 05:14:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.47<-15898 Statuses=0008 0009 05:14:42 Msec=3000 True Az=176.01 Ze=-58.47 Az status=0008 Ze status=0009 05:14:42 Check angles 05:14:42 SkyScan query 05:14:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:14:43 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:14:43 Message to Master queued w/err=0: serial=132005 error=0 05:14:48 Received message from Master: op=Filter serial=132006 05:14:48 Color wheel filter change from 0 to 0 05:14:48 FLIGetFilterPos err=0 currentPosition=0 05:14:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:48 Filter is already there-color wheel unchanged 05:14:48 Received message from Master: op=Shutter serial=132007 05:14:48 Shutter LASER close 05:14:48 Received message from Camera: op=State serial=132009 05:14:48 GetSingleValue result=40 Value=cccccccc 05:14:48 SkyScan query 05:14:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:14:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:49 Parameters OK 05:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:49 Set A/D data flow result=40 05:14:49 Set A/D channel type result=40 05:14:49 Set A/D encoding result=40 05:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:49 Set channel filter=0.000000e+000 result=40 05:14:49 Config A/D Result=40 05:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:49 Get A/D filter: -9.255963e+061 result=40 05:14:49 Get A/D value=-858993460 result=40 05:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:49 Parameters OK 05:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:49 Set A/D data flow result=40 05:14:49 Set A/D channel type result=40 05:14:49 Set A/D encoding result=40 05:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:49 Set channel filter=0.000000e+000 result=40 05:14:49 Config A/D Result=40 05:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:49 Get A/D filter: -9.255963e+061 result=40 05:14:49 Get A/D value=-858993460 result=40 05:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:49 Aux= 05:14:49 Message to Camera, serial 132009 queued 05:15:26 Received message from Master: op=PointingHead serial=132022 05:15:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:15:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:15:26 Point started: ret=0 05:15:26 point_skyscan result=0 05:15:27 Check angles 05:15:27 SkyScan query 05:15:27 SkyScan query done: ret=0 az=153.165<-10211 ze=-22.005<-13467 Statuses=0009 0009 05:15:27 Msec=0 True Az=153.165 Ze=-22.005 Az status=0009 Ze status=0009 05:15:27 Received message from Master: op=Identify serial=132023 05:15:27 Check angles 05:15:27 SkyScan query 05:15:28 SkyScan query done: ret=0 az=135.69<-9046 ze=-0.99<-12066 Statuses=0009 0009 05:15:28 Msec=750 True Az=135.69 Ze=-0.99 Az status=0009 Ze status=0009 05:15:28 Check angles 05:15:28 SkyScan query 05:15:29 SkyScan query done: ret=0 az=117.78<-7852 ze=20.37<-10642 Statuses=0009 0009 05:15:29 Msec=1500 True Az=117.78 Ze=20.37 Az status=0009 Ze status=0009 05:15:29 Check angles 05:15:29 SkyScan query 05:15:30 SkyScan query done: ret=0 az=99.99<-6666 ze=41.775<-9215 Statuses=0009 0009 05:15:30 Msec=2250 True Az=99.99 Ze=41.775 Az status=0009 Ze status=0009 05:15:30 Check angles [UTC 2018-12-14 05:15:30] 05:15:30 SkyScan query 05:15:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 05:15:30 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 05:15:30 Check angles 05:15:30 SkyScan query 05:15:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:15:31 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:15:31 Message to Master queued w/err=0: serial=132022 error=0 05:15:36 Received message from Master: op=Filter serial=132026 05:15:36 Color wheel filter change from 0 to 0 05:15:36 FLIGetFilterPos err=0 currentPosition=0 05:15:36 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:36 Filter is already there-color wheel unchanged 05:15:36 Received message from Master: op=Shutter serial=132027 05:15:36 Shutter LASER close 05:15:36 Received message from Camera: op=State serial=132029 05:15:36 GetSingleValue result=40 Value=cccccccc 05:15:36 SkyScan query 05:15:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:15:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:37 Parameters OK 05:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:37 Set A/D data flow result=40 05:15:37 Set A/D channel type result=40 05:15:37 Set A/D encoding result=40 05:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:37 Set channel filter=0.000000e+000 result=40 05:15:37 Config A/D Result=40 05:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:37 Get A/D filter: -9.255963e+061 result=40 05:15:37 Get A/D value=-858993460 result=40 05:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:37 Parameters OK 05:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:37 Set A/D data flow result=40 05:15:37 Set A/D channel type result=40 05:15:37 Set A/D encoding result=40 05:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:37 Set channel filter=0.000000e+000 result=40 05:15:37 Config A/D Result=40 05:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:37 Get A/D filter: -9.255963e+061 result=40 05:15:37 Get A/D value=-858993460 result=40 05:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:37 Aux= 05:15:37 Message to Camera, serial 132029 queued [UTC 2018-12-14 05:15:52] 05:16:14 Received message from Master: op=PointingHead serial=132042 05:16:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:16:14 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:16:14 Point started: ret=0 05:16:14 point_skyscan result=0 05:16:15 Check angles 05:16:15 SkyScan query 05:16:15 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 05:16:15 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 05:16:16 Check angles 05:16:16 SkyScan query 05:16:16 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 05:16:16 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 05:16:16 Check angles 05:16:16 SkyScan query 05:16:17 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 05:16:17 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 05:16:17 Check angles 05:16:17 SkyScan query 05:16:18 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 05:16:18 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 05:16:18 Check angles 05:16:18 SkyScan query 05:16:18 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:16:18 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:16:19 Check angles 05:16:19 SkyScan query 05:16:19 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:16:19 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:16:19 Message to Master queued w/err=0: serial=132042 error=0 05:16:24 Received message from Master: op=Filter serial=132043 05:16:24 Color wheel filter change from 0 to 0 05:16:24 FLIGetFilterPos err=0 currentPosition=0 05:16:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:24 Filter is already there-color wheel unchanged 05:16:24 Received message from Master: op=Shutter serial=132044 05:16:24 Shutter LASER close 05:16:24 Received message from Camera: op=State serial=132046 05:16:24 GetSingleValue result=40 Value=cccccccc 05:16:24 SkyScan query 05:16:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:16:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:25 Parameters OK 05:16:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:25 Set A/D data flow result=40 05:16:25 Set A/D channel type result=40 05:16:25 Set A/D encoding result=40 05:16:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:25 Set channel filter=0.000000e+000 result=40 05:16:25 Config A/D Result=40 05:16:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:25 Get A/D filter: -9.255963e+061 result=40 05:16:25 Get A/D value=-858993460 result=40 05:16:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:25 Parameters OK 05:16:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:25 Set A/D data flow result=40 05:16:25 Set A/D channel type result=40 05:16:25 Set A/D encoding result=40 05:16:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:25 Set channel filter=0.000000e+000 result=40 05:16:25 Config A/D Result=40 05:16:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:25 Get A/D filter: -9.255963e+061 result=40 05:16:25 Get A/D value=-858993460 result=40 05:16:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:25 Aux= 05:16:25 Message to Camera, serial 132046 queued 05:17:02 Received message from Master: op=PointingHead serial=132059 05:17:02 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:17:02 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:17:02 Point started: ret=0 05:17:02 point_skyscan result=0 05:17:03 Check angles 05:17:03 SkyScan query 05:17:03 SkyScan query done: ret=0 az=152.955<-10197 ze=8.655<-11423 Statuses=0009 0009 05:17:03 Msec=0 True Az=152.955 Ze=8.655 Az status=0009 Ze status=0009 05:17:04 Check angles 05:17:04 SkyScan query 05:17:04 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.69<-12846 Statuses=0009 0009 05:17:04 Msec=750 True Az=135.12 Ze=-12.69 Az status=0009 Ze status=0009 05:17:04 Check angles 05:17:04 SkyScan query 05:17:05 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.765<-14251 Statuses=0009 0009 05:17:05 Msec=1500 True Az=117.585 Ze=-33.765 Az status=0009 Ze status=0009 05:17:05 Check angles 05:17:05 SkyScan query 05:17:06 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 05:17:06 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 05:17:06 Check angles 05:17:06 SkyScan query 05:17:06 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:17:06 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:17:07 Check angles 05:17:07 SkyScan query 05:17:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:17:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:17:07 Message to Master queued w/err=0: serial=132059 error=0 05:17:12 Received message from Master: op=Filter serial=132060 05:17:12 Color wheel filter change from 0 to 0 05:17:12 FLIGetFilterPos err=0 currentPosition=0 05:17:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:12 Filter is already there-color wheel unchanged 05:17:12 Received message from Master: op=Shutter serial=132061 05:17:12 Shutter LASER close 05:17:12 Received message from Camera: op=State serial=132063 05:17:12 GetSingleValue result=40 Value=cccccccc 05:17:12 SkyScan query 05:17:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:17:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:13 Parameters OK 05:17:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:13 Set A/D data flow result=40 05:17:13 Set A/D channel type result=40 05:17:13 Set A/D encoding result=40 05:17:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:13 Set channel filter=0.000000e+000 result=40 05:17:13 Config A/D Result=40 05:17:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:13 Get A/D filter: -9.255963e+061 result=40 05:17:13 Get A/D value=-858993460 result=40 05:17:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:13 Parameters OK 05:17:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:13 Set A/D data flow result=40 05:17:13 Set A/D channel type result=40 05:17:13 Set A/D encoding result=40 05:17:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:13 Set channel filter=0.000000e+000 result=40 05:17:13 Config A/D Result=40 05:17:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:13 Get A/D filter: -9.255963e+061 result=40 05:17:13 Get A/D value=-858993460 result=40 05:17:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:13 Aux= 05:17:13 Message to Camera, serial 132063 queued 05:17:50 Received message from Master: op=PointingHead serial=132076 05:17:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:17:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:17:50 Point started: ret=0 05:17:50 point_skyscan result=0 05:17:51 Check angles 05:17:51 SkyScan query 05:17:52 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.63<-17442 Statuses=0009 0009 05:17:52 Msec=0 True Az=109.35 Ze=-81.63 Az status=0009 Ze status=0009 05:17:52 Check angles 05:17:52 SkyScan query 05:17:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.585<-18839 Statuses=0008 0009 05:17:52 Msec=750 True Az=112.995 Ze=-102.585 Az status=0008 Ze status=0009 05:17:53 Check angles 05:17:53 SkyScan query 05:17:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.54<-20236 Statuses=0008 0009 05:17:53 Msec=1500 True Az=112.995 Ze=-123.54 Az status=0008 Ze status=0009 05:17:53 Check angles 05:17:53 SkyScan query 05:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.885<-21659 Statuses=0008 0009 05:17:54 Msec=2250 True Az=112.995 Ze=-144.885 Az status=0008 Ze status=0009 05:17:54 Check angles 05:17:54 SkyScan query 05:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.84<-23056 Statuses=0008 0009 05:17:55 Msec=3000 True Az=112.995 Ze=-165.84 Az status=0008 Ze status=0009 05:17:55 Check angles 05:17:55 SkyScan query 05:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:17:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:17:55 Message to Master queued w/err=0: serial=132076 error=0 05:18:00 Received message from Master: op=Filter serial=132077 05:18:00 Color wheel filter change from 0 to 0 05:18:00 FLIGetFilterPos err=0 currentPosition=0 05:18:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:00 Filter is already there-color wheel unchanged 05:18:01 Received message from Master: op=Shutter serial=132078 05:18:01 Shutter LASER open 05:18:01 Received message from Camera: op=State serial=132080 05:18:01 GetSingleValue result=40 Value=cccccccc 05:18:01 SkyScan query 05:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:18:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:01 Parameters OK 05:18:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:01 Set A/D data flow result=40 05:18:01 Set A/D channel type result=40 05:18:01 Set A/D encoding result=40 05:18:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:01 Set channel filter=0.000000e+000 result=40 05:18:01 Config A/D Result=40 05:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:01 Get A/D filter: -9.255963e+061 result=40 05:18:01 Get A/D value=-858993460 result=40 05:18:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:01 Parameters OK 05:18:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:01 Set A/D data flow result=40 05:18:01 Set A/D channel type result=40 05:18:01 Set A/D encoding result=40 05:18:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:01 Set channel filter=0.000000e+000 result=40 05:18:01 Config A/D Result=40 05:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:01 Get A/D filter: -9.255963e+061 result=40 05:18:01 Get A/D value=-858993460 result=40 05:18:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:01 Aux= 05:18:01 Message to Camera, serial 132080 queued 05:18:10 Received message from Master: op=Shutter serial=132090 05:18:10 Shutter LASER close 05:18:10 Received message from Master: op=PointingHead serial=132094 05:18:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:18:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:18:10 Point started: ret=0 05:18:10 point_skyscan result=0 05:18:11 Check angles 05:18:11 SkyScan query 05:18:12 SkyScan query done: ret=0 az=90.15<-6010 ze=157.545<-1497 Statuses=0009 0009 05:18:12 Msec=0 True Az=90.15 Ze=157.545 Az status=0009 Ze status=0009 05:18:12 Check angles 05:18:12 SkyScan query 05:18:13 SkyScan query done: ret=0 az=72.675<-4845 ze=136.56<-2896 Statuses=0009 0009 05:18:13 Msec=750 True Az=72.675 Ze=136.56 Az status=0009 Ze status=0009 05:18:13 Check angles 05:18:13 SkyScan query 05:18:13 SkyScan query done: ret=0 az=54.81<-3654 ze=115.215<-4319 Statuses=0009 0009 05:18:13 Msec=1500 True Az=54.81 Ze=115.215 Az status=0009 Ze status=0009 05:18:13 Check angles 05:18:13 SkyScan query 05:18:14 SkyScan query done: ret=0 az=41.01<-2734 ze=94.215<-5719 Statuses=0009 0009 05:18:14 Msec=2250 True Az=41.01 Ze=94.215 Az status=0009 Ze status=0009 05:18:14 Check angles 05:18:14 SkyScan query 05:18:15 SkyScan query done: ret=0 az=40.995<-2733 ze=73.26<-7116 Statuses=0008 0009 05:18:15 Msec=3000 True Az=40.995 Ze=73.26 Az status=0008 Ze status=0009 05:18:15 Check angles 05:18:15 SkyScan query 05:18:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 05:18:16 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 05:18:16 Check angles 05:18:16 SkyScan query 05:18:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:18:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:18:16 Message to Master queued w/err=0: serial=132094 error=0 05:18:21 Received message from Master: op=Filter serial=132095 05:18:21 Color wheel filter change from 0 to 0 05:18:21 FLIGetFilterPos err=0 currentPosition=0 05:18:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:21 Filter is already there-color wheel unchanged 05:18:22 Received message from Master: op=Shutter serial=132096 05:18:22 Shutter LASER close 05:18:22 Received message from Camera: op=State serial=132098 05:18:22 GetSingleValue result=40 Value=cccccccc 05:18:22 SkyScan query 05:18:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:18:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:22 Parameters OK 05:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:22 Set A/D data flow result=40 05:18:22 Set A/D channel type result=40 05:18:22 Set A/D encoding result=40 05:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:22 Set channel filter=0.000000e+000 result=40 05:18:22 Config A/D Result=40 05:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:22 Get A/D filter: -9.255963e+061 result=40 05:18:22 Get A/D value=-858993460 result=40 05:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:22 Parameters OK 05:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:22 Set A/D data flow result=40 05:18:22 Set A/D channel type result=40 05:18:22 Set A/D encoding result=40 05:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:22 Set channel filter=0.000000e+000 result=40 05:18:22 Config A/D Result=40 05:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:22 Get A/D filter: -9.255963e+061 result=40 05:18:22 Get A/D value=-858993460 result=40 05:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:22 Aux= 05:18:22 Message to Camera, serial 132098 queued 05:18:59 Received message from Master: op=PointingHead serial=132111 05:18:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:18:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:18:59 Point started: ret=0 05:18:59 point_skyscan result=0 05:19:00 Check angles 05:19:00 SkyScan query 05:19:01 SkyScan query done: ret=0 az=64.065<-4271 ze=66.54<-7564 Statuses=0009 0008 05:19:01 Msec=0 True Az=64.065 Ze=66.54 Az status=0009 Ze status=0008 05:19:01 Check angles 05:19:01 SkyScan query 05:19:02 SkyScan query done: ret=0 az=81.6<-5440 ze=66.51<-7566 Statuses=0009 0008 05:19:02 Msec=750 True Az=81.6 Ze=66.51 Az status=0009 Ze status=0008 05:19:02 Check angles 05:19:02 SkyScan query 05:19:02 SkyScan query done: ret=0 az=99.015<-6601 ze=66.495<-7567 Statuses=0009 0008 05:19:02 Msec=1500 True Az=99.015 Ze=66.495 Az status=0009 Ze status=0008 05:19:02 Check angles 05:19:02 SkyScan query 05:19:03 SkyScan query done: ret=0 az=116.64<-7776 ze=66.495<-7567 Statuses=0009 0008 05:19:03 Msec=2250 True Az=116.64 Ze=66.495 Az status=0009 Ze status=0008 05:19:03 Check angles 05:19:03 SkyScan query 05:19:04 SkyScan query done: ret=0 az=134.04<-8936 ze=66.495<-7567 Statuses=0009 0008 05:19:04 Msec=3000 True Az=134.04 Ze=66.495 Az status=0009 Ze status=0008 05:19:04 Check angles 05:19:04 SkyScan query 05:19:05 SkyScan query done: ret=0 az=151.425<-10095 ze=66.495<-7567 Statuses=0009 0008 05:19:05 Msec=3750 True Az=151.425 Ze=66.495 Az status=0009 Ze status=0008 05:19:05 Check angles 05:19:05 SkyScan query 05:19:05 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:19:05 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:19:05 Message to Master queued w/err=0: serial=132111 error=0 05:19:10 Received message from Master: op=Filter serial=132112 05:19:10 Color wheel filter change from 0 to 0 05:19:10 FLIGetFilterPos err=0 currentPosition=0 05:19:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:10 Filter is already there-color wheel unchanged 05:19:10 Received message from Master: op=Shutter serial=132113 05:19:10 Shutter LASER close 05:19:10 Received message from Camera: op=State serial=132115 05:19:10 GetSingleValue result=40 Value=cccccccc 05:19:10 SkyScan query 05:19:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:19:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:11 Parameters OK 05:19:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:11 Set A/D data flow result=40 05:19:11 Set A/D channel type result=40 05:19:11 Set A/D encoding result=40 05:19:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:11 Set channel filter=0.000000e+000 result=40 05:19:11 Config A/D Result=40 05:19:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:11 Get A/D filter: -9.255963e+061 result=40 05:19:11 Get A/D value=-858993460 result=40 05:19:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:11 Parameters OK 05:19:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:11 Set A/D data flow result=40 05:19:11 Set A/D channel type result=40 05:19:11 Set A/D encoding result=40 05:19:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:11 Set channel filter=0.000000e+000 result=40 05:19:11 Config A/D Result=40 05:19:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:11 Get A/D filter: -9.255963e+061 result=40 05:19:11 Get A/D value=-858993460 result=40 05:19:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:11 Aux= 05:19:11 Message to Camera, serial 132115 queued 05:19:48 Received message from Master: op=PointingHead serial=132128 05:19:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:19:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:19:48 Point started: ret=0 05:19:48 point_skyscan result=0 05:19:49 Check angles 05:19:49 SkyScan query 05:19:50 SkyScan query done: ret=0 az=134.49<-8966 ze=36.165<-9589 Statuses=0009 0009 05:19:50 Msec=0 True Az=134.49 Ze=36.165 Az status=0009 Ze status=0009 05:19:50 Check angles 05:19:50 SkyScan query 05:19:50 SkyScan query done: ret=0 az=116.67<-7778 ze=14.7<-11020 Statuses=0009 0009 05:19:50 Msec=750 True Az=116.67 Ze=14.7 Az status=0009 Ze status=0009 05:19:51 Check angles 05:19:51 SkyScan query 05:19:51 SkyScan query done: ret=0 az=99.15<-6610 ze=-6.24<-12416 Statuses=0009 0009 05:19:51 Msec=1500 True Az=99.15 Ze=-6.24 Az status=0009 Ze status=0009 05:19:51 Check angles 05:19:51 SkyScan query 05:19:52 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.195<-13813 Statuses=0009 0009 05:19:52 Msec=2250 True Az=81.81 Ze=-27.195 Az status=0009 Ze status=0009 05:19:52 Check angles 05:19:52 SkyScan query 05:19:53 SkyScan query done: ret=0 az=64.245<-4283 ze=-38.58<-14572 Statuses=0009 0008 05:19:53 Msec=3000 True Az=64.245 Ze=-38.58 Az status=0009 Ze status=0008 05:19:53 Check angles 05:19:53 SkyScan query 05:19:53 SkyScan query done: ret=0 az=46.83<-3122 ze=-38.52<-14568 Statuses=0009 0008 05:19:53 Msec=3750 True Az=46.83 Ze=-38.52 Az status=0009 Ze status=0008 05:19:54 Check angles 05:19:54 SkyScan query 05:19:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:19:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:19:54 Message to Master queued w/err=0: serial=132128 error=0 05:19:59 Received message from Master: op=Filter serial=132129 05:19:59 Color wheel filter change from 0 to 0 05:19:59 FLIGetFilterPos err=0 currentPosition=0 05:19:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:59 Filter is already there-color wheel unchanged 05:19:59 Received message from Master: op=Shutter serial=132130 05:19:59 Shutter LASER close 05:19:59 Received message from Camera: op=State serial=132132 05:19:59 GetSingleValue result=40 Value=cccccccc 05:19:59 SkyScan query 05:20:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:20:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:00 Parameters OK 05:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:00 Set A/D data flow result=40 05:20:00 Set A/D channel type result=40 05:20:00 Set A/D encoding result=40 05:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:00 Set channel filter=0.000000e+000 result=40 05:20:00 Config A/D Result=40 05:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:00 Get A/D filter: -9.255963e+061 result=40 05:20:00 Get A/D value=-858993460 result=40 05:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:00 Parameters OK 05:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:00 Set A/D data flow result=40 05:20:00 Set A/D channel type result=40 05:20:00 Set A/D encoding result=40 05:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:00 Set channel filter=0.000000e+000 result=40 05:20:00 Config A/D Result=40 05:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:00 Get A/D filter: -9.255963e+061 result=40 05:20:00 Get A/D value=-858993460 result=40 05:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:00 Aux= 05:20:00 Message to Camera, serial 132132 queued 05:20:37 Received message from Master: op=PointingHead serial=132145 05:20:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:20:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:20:37 Point started: ret=0 05:20:37 point_skyscan result=0 05:20:38 Check angles 05:20:38 SkyScan query 05:20:38 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.085<-16539 Statuses=0009 0009 05:20:38 Msec=0 True Az=63.87 Ze=-68.085 Az status=0009 Ze status=0009 05:20:39 Check angles 05:20:39 SkyScan query 05:20:39 SkyScan query done: ret=0 az=81.675<-5445 ze=-89.535<-17969 Statuses=0009 0009 05:20:39 Msec=750 True Az=81.675 Ze=-89.535 Az status=0009 Ze status=0009 05:20:39 Check angles 05:20:39 SkyScan query 05:20:40 SkyScan query done: ret=0 az=99.51<-6634 ze=-110.94<-19396 Statuses=0009 0009 05:20:40 Msec=1500 True Az=99.51 Ze=-110.94 Az status=0009 Ze status=0009 05:20:40 Check angles 05:20:40 SkyScan query 05:20:41 SkyScan query done: ret=0 az=117.015<-7801 ze=-131.82<-20788 Statuses=0009 0009 05:20:41 Msec=2250 True Az=117.015 Ze=-131.82 Az status=0009 Ze status=0009 05:20:41 Check angles 05:20:41 SkyScan query 05:20:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 05:20:41 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 05:20:42 Check angles 05:20:42 SkyScan query 05:20:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 05:20:42 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 05:20:42 Message to Master queued w/err=0: serial=132145 error=0 05:20:47 Received message from Master: op=Filter serial=132146 05:20:47 Color wheel filter change from 0 to 0 05:20:47 FLIGetFilterPos err=0 currentPosition=0 05:20:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:47 Filter is already there-color wheel unchanged 05:20:47 Received message from Master: op=Shutter serial=132147 05:20:47 Shutter LASER close 05:20:47 Received message from Camera: op=State serial=132149 05:20:47 GetSingleValue result=40 Value=cccccccc 05:20:47 SkyScan query 05:20:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:20:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:48 Parameters OK 05:20:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:48 Set A/D data flow result=40 05:20:48 Set A/D channel type result=40 05:20:48 Set A/D encoding result=40 05:20:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:48 Set channel filter=0.000000e+000 result=40 05:20:48 Config A/D Result=40 05:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:48 Get A/D filter: -9.255963e+061 result=40 05:20:48 Get A/D value=-858993460 result=40 05:20:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:48 Parameters OK 05:20:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:48 Set A/D data flow result=40 05:20:48 Set A/D channel type result=40 05:20:48 Set A/D encoding result=40 05:20:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:48 Set channel filter=0.000000e+000 result=40 05:20:48 Config A/D Result=40 05:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:48 Get A/D filter: -9.255963e+061 result=40 05:20:48 Get A/D value=-858993460 result=40 05:20:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:48 Aux= 05:20:48 Message to Camera, serial 132149 queued 05:21:25 Received message from Master: op=PointingHead serial=132162 05:21:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:21:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:21:25 Point started: ret=0 05:21:25 point_skyscan result=0 05:21:26 Check angles 05:21:26 SkyScan query 05:21:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 05:21:26 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 05:21:27 Check angles 05:21:27 SkyScan query 05:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:21:27 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:21:27 Message to Master queued w/err=0: serial=132162 error=0 05:21:32 Received message from Master: op=Filter serial=132163 05:21:32 Color wheel filter change from 0 to 0 05:21:32 FLIGetFilterPos err=0 currentPosition=0 05:21:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:32 Filter is already there-color wheel unchanged 05:21:32 Received message from Master: op=Shutter serial=132164 05:21:32 Shutter LASER open 05:21:33 Received message from Camera: op=State serial=132166 05:21:33 GetSingleValue result=40 Value=cccccccc 05:21:33 SkyScan query 05:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:21:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:33 Parameters OK 05:21:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:33 Set A/D data flow result=40 05:21:33 Set A/D channel type result=40 05:21:33 Set A/D encoding result=40 05:21:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:33 Set channel filter=0.000000e+000 result=40 05:21:33 Config A/D Result=40 05:21:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:33 Get A/D filter: -9.255963e+061 result=40 05:21:33 Get A/D value=-858993460 result=40 05:21:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:33 Parameters OK 05:21:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:33 Set A/D data flow result=40 05:21:33 Set A/D channel type result=40 05:21:33 Set A/D encoding result=40 05:21:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:33 Set channel filter=0.000000e+000 result=40 05:21:33 Config A/D Result=40 05:21:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:33 Get A/D filter: -9.255963e+061 result=40 05:21:33 Get A/D value=-858993460 result=40 05:21:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:33 Aux= 05:21:33 Message to Camera, serial 132166 queued 05:21:42 Received message from Master: op=Shutter serial=132176 05:21:42 Shutter LASER close 05:21:42 Received message from Master: op=PointingHead serial=132180 05:21:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:21:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:21:43 Point started: ret=0 05:21:43 point_skyscan result=0 05:21:43 Check angles 05:21:43 SkyScan query 05:21:44 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.92<-21528 Statuses=0009 0009 05:21:44 Msec=0 True Az=136.23 Ze=-142.92 Az status=0009 Ze status=0009 05:21:44 Check angles 05:21:44 SkyScan query 05:21:45 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.95<-20130 Statuses=0009 0009 05:21:45 Msec=750 True Az=153.75 Ze=-121.95 Az status=0009 Ze status=0009 05:21:45 Check angles 05:21:45 SkyScan query 05:21:45 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.995<-18733 Statuses=0009 0009 05:21:45 Msec=1500 True Az=171.24 Ze=-100.995 Az status=0009 Ze status=0009 05:21:46 Check angles 05:21:46 SkyScan query 05:21:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.1<-17340 Statuses=0008 0009 05:21:46 Msec=2250 True Az=176.01 Ze=-80.1 Az status=0008 Ze status=0009 05:21:46 Check angles 05:21:46 SkyScan query 05:21:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.1<-15940 Statuses=0008 0009 05:21:47 Msec=3000 True Az=176.01 Ze=-59.1 Az status=0008 Ze status=0009 05:21:47 Check angles 05:21:47 SkyScan query 05:21:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:21:48 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:21:48 Message to Master queued w/err=0: serial=132180 error=0 05:21:53 Received message from Master: op=Filter serial=132181 05:21:53 Color wheel filter change from 0 to 0 05:21:53 FLIGetFilterPos err=0 currentPosition=0 05:21:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:53 Filter is already there-color wheel unchanged 05:21:53 Received message from Master: op=Shutter serial=132182 05:21:53 Shutter LASER close 05:21:53 Received message from Camera: op=State serial=132184 05:21:53 GetSingleValue result=40 Value=cccccccc 05:21:53 SkyScan query 05:21:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:21:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:54 Parameters OK 05:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:54 Set A/D data flow result=40 05:21:54 Set A/D channel type result=40 05:21:54 Set A/D encoding result=40 05:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:54 Set channel filter=0.000000e+000 result=40 05:21:54 Config A/D Result=40 05:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:54 Get A/D filter: -9.255963e+061 result=40 05:21:54 Get A/D value=-858993460 result=40 05:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:54 Parameters OK 05:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:54 Set A/D data flow result=40 05:21:54 Set A/D channel type result=40 05:21:54 Set A/D encoding result=40 05:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:54 Set channel filter=0.000000e+000 result=40 05:21:54 Config A/D Result=40 05:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:54 Get A/D filter: -9.255963e+061 result=40 05:21:54 Get A/D value=-858993460 result=40 05:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:54 Aux= 05:21:54 Message to Camera, serial 132184 queued 05:22:29 Received message from Master: op=PointingHead serial=132196 05:22:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:22:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:22:30 Point started: ret=0 05:22:30 point_skyscan result=0 05:22:31 Check angles 05:22:31 SkyScan query 05:22:31 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.825<-13455 Statuses=0009 0009 05:22:31 Msec=0 True Az=152.955 Ze=-21.825 Az status=0009 Ze status=0009 05:22:31 Check angles 05:22:31 SkyScan query 05:22:32 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.825<-12055 Statuses=0009 0009 05:22:32 Msec=750 True Az=135.615 Ze=-0.825 Az status=0009 Ze status=0009 05:22:32 Check angles 05:22:32 SkyScan query 05:22:33 SkyScan query done: ret=0 az=118.065<-7871 ze=20.085<-10661 Statuses=0009 0009 05:22:33 Msec=1500 True Az=118.065 Ze=20.085 Az status=0009 Ze status=0009 05:22:33 Check angles 05:22:33 SkyScan query 05:22:33 SkyScan query done: ret=0 az=100.695<-6713 ze=41.07<-9262 Statuses=0009 0009 05:22:33 Msec=2250 True Az=100.695 Ze=41.07 Az status=0009 Ze status=0009 05:22:34 Check angles 05:22:34 SkyScan query 05:22:34 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 05:22:34 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 05:22:34 Check angles 05:22:34 SkyScan query 05:22:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:22:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:22:35 Message to Master queued w/err=0: serial=132196 error=0 05:22:40 Received message from Master: op=Filter serial=132197 05:22:40 Color wheel filter change from 0 to 0 05:22:40 FLIGetFilterPos err=0 currentPosition=0 05:22:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:40 Filter is already there-color wheel unchanged 05:22:40 Received message from Master: op=Shutter serial=132198 05:22:40 Shutter LASER close 05:22:40 Received message from Camera: op=State serial=132200 05:22:40 GetSingleValue result=40 Value=cccccccc 05:22:40 SkyScan query 05:22:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:22:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:41 Parameters OK 05:22:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:41 Set A/D data flow result=40 05:22:41 Set A/D channel type result=40 05:22:41 Set A/D encoding result=40 05:22:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:41 Set channel filter=0.000000e+000 result=40 05:22:41 Config A/D Result=40 05:22:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:41 Get A/D filter: -9.255963e+061 result=40 05:22:41 Get A/D value=-858993460 result=40 05:22:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:41 Parameters OK 05:22:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:41 Set A/D data flow result=40 05:22:41 Set A/D channel type result=40 05:22:41 Set A/D encoding result=40 05:22:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:41 Set channel filter=0.000000e+000 result=40 05:22:41 Config A/D Result=40 05:22:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:41 Get A/D filter: -9.255963e+061 result=40 05:22:41 Get A/D value=-858993460 result=40 05:22:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:41 Aux= 05:22:41 Message to Camera, serial 132200 queued 05:23:18 Received message from Master: op=PointingHead serial=132213 05:23:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:23:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:23:18 Point started: ret=0 05:23:18 point_skyscan result=0 05:23:19 Check angles 05:23:19 SkyScan query 05:23:19 SkyScan query done: ret=0 az=108.9<-7260 ze=38.49<-9434 Statuses=0009 0008 05:23:19 Msec=0 True Az=108.9 Ze=38.49 Az status=0009 Ze status=0008 05:23:19 Check angles 05:23:19 SkyScan query 05:23:20 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 05:23:20 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 05:23:20 Check angles 05:23:20 SkyScan query 05:23:21 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 05:23:21 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 05:23:21 Check angles 05:23:21 SkyScan query 05:23:21 SkyScan query done: ret=0 az=161.625<-10775 ze=38.505<-9433 Statuses=0009 0008 05:23:21 Msec=2250 True Az=161.625 Ze=38.505 Az status=0009 Ze status=0008 05:23:22 Check angles 05:23:22 SkyScan query 05:23:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:23:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:23:22 Check angles 05:23:22 SkyScan query 05:23:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:23:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:23:23 Message to Master queued w/err=0: serial=132213 error=0 05:23:28 Received message from Master: op=Filter serial=132214 05:23:28 Color wheel filter change from 0 to 0 05:23:28 FLIGetFilterPos err=0 currentPosition=0 05:23:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:28 Filter is already there-color wheel unchanged 05:23:28 Received message from Master: op=Shutter serial=132215 05:23:28 Shutter LASER close 05:23:28 Received message from Camera: op=State serial=132217 05:23:28 GetSingleValue result=40 Value=cccccccc 05:23:28 SkyScan query 05:23:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:23:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:29 Parameters OK 05:23:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:29 Set A/D data flow result=40 05:23:29 Set A/D channel type result=40 05:23:29 Set A/D encoding result=40 05:23:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:29 Set channel filter=0.000000e+000 result=40 05:23:29 Config A/D Result=40 05:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:29 Get A/D filter: -9.255963e+061 result=40 05:23:29 Get A/D value=-858993460 result=40 05:23:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:29 Parameters OK 05:23:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:29 Set A/D data flow result=40 05:23:29 Set A/D channel type result=40 05:23:29 Set A/D encoding result=40 05:23:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:29 Set channel filter=0.000000e+000 result=40 05:23:29 Config A/D Result=40 05:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:29 Get A/D filter: -9.255963e+061 result=40 05:23:29 Get A/D value=-858993460 result=40 05:23:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:29 Aux= 05:23:29 Message to Camera, serial 132217 queued 05:24:06 Received message from Master: op=PointingHead serial=132230 05:24:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:24:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:24:06 Point started: ret=0 05:24:06 point_skyscan result=0 05:24:07 Check angles 05:24:07 SkyScan query 05:24:07 SkyScan query done: ret=0 az=152.955<-10197 ze=8.79<-11414 Statuses=0009 0009 05:24:07 Msec=0 True Az=152.955 Ze=8.79 Az status=0009 Ze status=0009 05:24:07 Check angles 05:24:07 SkyScan query 05:24:08 SkyScan query done: ret=0 az=135.63<-9042 ze=-12.15<-12810 Statuses=0009 0009 05:24:08 Msec=750 True Az=135.63 Ze=-12.15 Az status=0009 Ze status=0009 05:24:08 Check angles 05:24:08 SkyScan query 05:24:09 SkyScan query done: ret=0 az=117.645<-7843 ze=-33.555<-14237 Statuses=0009 0009 05:24:09 Msec=1500 True Az=117.645 Ze=-33.555 Az status=0009 Ze status=0009 05:24:09 Check angles 05:24:09 SkyScan query 05:24:10 SkyScan query done: ret=0 az=99.96<-6664 ze=-51.555<-15437 Statuses=0009 0009 05:24:10 Msec=2250 True Az=99.96 Ze=-51.555 Az status=0009 Ze status=0009 05:24:10 Check angles 05:24:10 SkyScan query 05:24:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 05:24:10 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 05:24:10 Check angles 05:24:10 SkyScan query 05:24:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:24:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:24:11 Message to Master queued w/err=0: serial=132230 error=0 05:24:16 Received message from Master: op=Filter serial=132231 05:24:16 Color wheel filter change from 0 to 0 05:24:16 FLIGetFilterPos err=0 currentPosition=0 05:24:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:16 Filter is already there-color wheel unchanged 05:24:16 Received message from Master: op=Shutter serial=132232 05:24:16 Shutter LASER close 05:24:16 Received message from Camera: op=State serial=132234 05:24:16 GetSingleValue result=40 Value=cccccccc 05:24:16 SkyScan query 05:24:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:24:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:17 Parameters OK 05:24:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:17 Set A/D data flow result=40 05:24:17 Set A/D channel type result=40 05:24:17 Set A/D encoding result=40 05:24:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:17 Set channel filter=0.000000e+000 result=40 05:24:17 Config A/D Result=40 05:24:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:17 Get A/D filter: -9.255963e+061 result=40 05:24:17 Get A/D value=-858993460 result=40 05:24:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:17 Parameters OK 05:24:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:17 Set A/D data flow result=40 05:24:17 Set A/D channel type result=40 05:24:17 Set A/D encoding result=40 05:24:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:17 Set channel filter=0.000000e+000 result=40 05:24:17 Config A/D Result=40 05:24:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:17 Get A/D filter: -9.255963e+061 result=40 05:24:17 Get A/D value=-858993460 result=40 05:24:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:17 Aux= 05:24:17 Message to Camera, serial 132234 queued 05:24:54 Received message from Master: op=PointingHead serial=132247 05:24:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:24:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:24:54 Point started: ret=0 05:24:54 point_skyscan result=0 05:24:55 Check angles 05:24:55 SkyScan query 05:24:55 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.495<-17433 Statuses=0009 0009 05:24:55 Msec=0 True Az=109.14 Ze=-81.495 Az status=0009 Ze status=0009 05:24:56 Check angles 05:24:56 SkyScan query 05:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.45<-18830 Statuses=0008 0009 05:24:56 Msec=750 True Az=112.995 Ze=-102.45 Az status=0008 Ze status=0009 05:24:56 Check angles 05:24:56 SkyScan query 05:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 05:24:57 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 05:24:57 Check angles 05:24:57 SkyScan query 05:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.765<-21651 Statuses=0008 0009 05:24:58 Msec=2250 True Az=112.995 Ze=-144.765 Az status=0008 Ze status=0009 05:24:58 Check angles 05:24:58 SkyScan query 05:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.735<-23049 Statuses=0008 0009 05:24:58 Msec=3000 True Az=112.995 Ze=-165.735 Az status=0008 Ze status=0009 05:24:59 Check angles 05:24:59 SkyScan query 05:24:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:24:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:24:59 Message to Master queued w/err=0: serial=132247 error=0 05:25:04 Received message from Master: op=Filter serial=132248 05:25:04 Color wheel filter change from 0 to 0 05:25:04 FLIGetFilterPos err=0 currentPosition=0 05:25:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:04 Filter is already there-color wheel unchanged 05:25:04 Received message from Master: op=Shutter serial=132249 05:25:04 Shutter LASER open 05:25:04 Received message from Camera: op=State serial=132251 05:25:04 GetSingleValue result=40 Value=cccccccc 05:25:04 SkyScan query 05:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:25:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:05 Parameters OK 05:25:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:05 Set A/D data flow result=40 05:25:05 Set A/D channel type result=40 05:25:05 Set A/D encoding result=40 05:25:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:05 Set channel filter=0.000000e+000 result=40 05:25:05 Config A/D Result=40 05:25:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:05 Get A/D filter: -9.255963e+061 result=40 05:25:05 Get A/D value=-858993460 result=40 05:25:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:05 Parameters OK 05:25:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:05 Set A/D data flow result=40 05:25:05 Set A/D channel type result=40 05:25:05 Set A/D encoding result=40 05:25:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:05 Set channel filter=0.000000e+000 result=40 05:25:05 Config A/D Result=40 05:25:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:05 Get A/D filter: -9.255963e+061 result=40 05:25:05 Get A/D value=-858993460 result=40 05:25:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:05 Aux= 05:25:05 Message to Camera, serial 132251 queued 05:25:14 Received message from Master: op=Shutter serial=132261 05:25:14 Shutter LASER close 05:25:14 Received message from Master: op=PointingHead serial=132265 05:25:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:25:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:25:14 Point started: ret=0 05:25:14 point_skyscan result=0 05:25:15 Check angles 05:25:15 SkyScan query 05:25:16 SkyScan query done: ret=0 az=89.625<-5975 ze=156.99<-1534 Statuses=0009 0009 05:25:16 Msec=0 True Az=89.625 Ze=156.99 Az status=0009 Ze status=0009 05:25:16 Check angles 05:25:16 SkyScan query 05:25:16 SkyScan query done: ret=0 az=71.835<-4789 ze=135.63<-2958 Statuses=0009 0009 05:25:16 Msec=750 True Az=71.835 Ze=135.63 Az status=0009 Ze status=0009 05:25:17 Check angles 05:25:17 SkyScan query 05:25:17 SkyScan query done: ret=0 az=54.51<-3634 ze=114.615<-4359 Statuses=0009 0009 05:25:17 Msec=1500 True Az=54.51 Ze=114.615 Az status=0009 Ze status=0009 05:25:17 Check angles 05:25:17 SkyScan query 05:25:18 SkyScan query done: ret=0 az=41.025<-2735 ze=93.615<-5759 Statuses=0009 0009 05:25:18 Msec=2250 True Az=41.025 Ze=93.615 Az status=0009 Ze status=0009 05:25:18 Check angles 05:25:18 SkyScan query 05:25:19 SkyScan query done: ret=0 az=40.995<-2733 ze=72.705<-7153 Statuses=0008 0009 05:25:19 Msec=3000 True Az=40.995 Ze=72.705 Az status=0008 Ze status=0009 05:25:19 Check angles 05:25:19 SkyScan query 05:25:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 05:25:19 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 05:25:20 Check angles 05:25:20 SkyScan query 05:25:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:25:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:25:20 Message to Master queued w/err=0: serial=132265 error=0 05:25:25 Received message from Master: op=Filter serial=132266 05:25:25 Color wheel filter change from 0 to 0 05:25:25 FLIGetFilterPos err=0 currentPosition=0 05:25:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:25 Filter is already there-color wheel unchanged 05:25:25 Received message from Master: op=Shutter serial=132267 05:25:25 Shutter LASER close 05:25:26 Received message from Camera: op=State serial=132269 05:25:26 GetSingleValue result=40 Value=cccccccc 05:25:26 SkyScan query 05:25:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:25:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:26 Parameters OK 05:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:26 Set A/D data flow result=40 05:25:26 Set A/D channel type result=40 05:25:26 Set A/D encoding result=40 05:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:26 Set channel filter=0.000000e+000 result=40 05:25:26 Config A/D Result=40 05:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:26 Get A/D filter: -9.255963e+061 result=40 05:25:26 Get A/D value=-858993460 result=40 05:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:26 Parameters OK 05:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:26 Set A/D data flow result=40 05:25:26 Set A/D channel type result=40 05:25:26 Set A/D encoding result=40 05:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:26 Set channel filter=0.000000e+000 result=40 05:25:26 Config A/D Result=40 05:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:26 Get A/D filter: -9.255963e+061 result=40 05:25:26 Get A/D value=-858993460 result=40 05:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:26 Aux= [UTC 2018-12-14 05:25:26] 05:25:26 Message to Camera, serial 132269 queued 05:26:03 Received message from Master: op=PointingHead serial=132282 05:26:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:26:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:26:03 Point started: ret=0 05:26:03 point_skyscan result=0 05:26:04 Check angles 05:26:04 SkyScan query 05:26:05 SkyScan query done: ret=0 az=63.765<-4251 ze=66.54<-7564 Statuses=0009 0008 05:26:05 Msec=0 True Az=63.765 Ze=66.54 Az status=0009 Ze status=0008 05:26:05 Check angles 05:26:05 SkyScan query 05:26:05 SkyScan query done: ret=0 az=81.555<-5437 ze=66.51<-7566 Statuses=0009 0008 05:26:05 Msec=750 True Az=81.555 Ze=66.51 Az status=0009 Ze status=0008 05:26:06 Check angles 05:26:06 SkyScan query 05:26:06 SkyScan query done: ret=0 az=98.925<-6595 ze=66.495<-7567 Statuses=0009 0008 05:26:06 Msec=1500 True Az=98.925 Ze=66.495 Az status=0009 Ze status=0008 05:26:06 Check angles 05:26:06 SkyScan query 05:26:07 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 05:26:07 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 05:26:07 Check angles 05:26:07 SkyScan query 05:26:08 SkyScan query done: ret=0 az=134.385<-8959 ze=66.495<-7567 Statuses=0009 0008 05:26:08 Msec=3000 True Az=134.385 Ze=66.495 Az status=0009 Ze status=0008 05:26:08 Check angles 05:26:08 SkyScan query 05:26:08 SkyScan query done: ret=0 az=151.605<-10107 ze=66.495<-7567 Statuses=0009 0008 05:26:08 Msec=3750 True Az=151.605 Ze=66.495 Az status=0009 Ze status=0008 05:26:09 Check angles 05:26:09 SkyScan query 05:26:09 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 05:26:09 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 05:26:09 Message to Master queued w/err=0: serial=132282 error=0 05:26:14 Received message from Master: op=Filter serial=132283 05:26:14 Color wheel filter change from 0 to 0 05:26:14 FLIGetFilterPos err=0 currentPosition=0 05:26:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:14 Filter is already there-color wheel unchanged 05:26:14 Received message from Master: op=Shutter serial=132284 05:26:14 Shutter LASER close 05:26:14 Received message from Camera: op=State serial=132286 05:26:14 GetSingleValue result=40 Value=cccccccc 05:26:14 SkyScan query 05:26:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:26:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:15 Parameters OK 05:26:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:15 Set A/D data flow result=40 05:26:15 Set A/D channel type result=40 05:26:15 Set A/D encoding result=40 05:26:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:15 Set channel filter=0.000000e+000 result=40 05:26:15 Config A/D Result=40 05:26:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:15 Get A/D filter: -9.255963e+061 result=40 05:26:15 Get A/D value=-858993460 result=40 05:26:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:15 Parameters OK 05:26:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:15 Set A/D data flow result=40 05:26:15 Set A/D channel type result=40 05:26:15 Set A/D encoding result=40 05:26:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:15 Set channel filter=0.000000e+000 result=40 05:26:15 Config A/D Result=40 05:26:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:15 Get A/D filter: -9.255963e+061 result=40 05:26:15 Get A/D value=-858993460 result=40 05:26:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:15 Aux= 05:26:15 Message to Camera, serial 132286 queued 05:26:52 Received message from Master: op=PointingHead serial=132299 05:26:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:26:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:26:52 Point started: ret=0 05:26:52 point_skyscan result=0 05:26:53 Check angles 05:26:53 SkyScan query 05:26:53 SkyScan query done: ret=0 az=134.82<-8988 ze=36.645<-9557 Statuses=0009 0009 05:26:53 Msec=0 True Az=134.82 Ze=36.645 Az status=0009 Ze status=0009 05:26:54 Check angles 05:26:54 SkyScan query 05:26:54 SkyScan query done: ret=0 az=117.09<-7806 ze=15.285<-10981 Statuses=0009 0009 05:26:54 Msec=750 True Az=117.09 Ze=15.285 Az status=0009 Ze status=0009 05:26:54 Check angles 05:26:54 SkyScan query 05:26:55 SkyScan query done: ret=0 az=99.675<-6645 ze=-5.715<-12381 Statuses=0009 0009 05:26:55 Msec=1500 True Az=99.675 Ze=-5.715 Az status=0009 Ze status=0009 05:26:55 Check angles 05:26:55 SkyScan query 05:26:56 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.67<-13778 Statuses=0009 0009 05:26:56 Msec=2250 True Az=82.215 Ze=-26.67 Az status=0009 Ze status=0009 05:26:56 Check angles 05:26:56 SkyScan query 05:26:56 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.565<-14571 Statuses=0009 0008 05:26:56 Msec=3000 True Az=64.68 Ze=-38.565 Az status=0009 Ze status=0008 05:26:57 Check angles 05:26:57 SkyScan query 05:26:57 SkyScan query done: ret=0 az=47.28<-3152 ze=-38.535<-14569 Statuses=0009 0008 05:26:57 Msec=3750 True Az=47.28 Ze=-38.535 Az status=0009 Ze status=0008 05:26:57 Check angles 05:26:57 SkyScan query 05:26:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:26:58 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:26:58 Message to Master queued w/err=0: serial=132299 error=0 05:27:03 Received message from Master: op=Filter serial=132300 05:27:03 Color wheel filter change from 0 to 0 05:27:03 FLIGetFilterPos err=0 currentPosition=0 05:27:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:03 Filter is already there-color wheel unchanged 05:27:03 Received message from Master: op=Shutter serial=132301 05:27:03 Shutter LASER close 05:27:03 Received message from Camera: op=State serial=132303 05:27:03 GetSingleValue result=40 Value=cccccccc 05:27:03 SkyScan query 05:27:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:27:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:04 Parameters OK 05:27:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:04 Set A/D data flow result=40 05:27:04 Set A/D channel type result=40 05:27:04 Set A/D encoding result=40 05:27:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:04 Set channel filter=0.000000e+000 result=40 05:27:04 Config A/D Result=40 05:27:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:04 Get A/D filter: -9.255963e+061 result=40 05:27:04 Get A/D value=-858993460 result=40 05:27:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:04 Parameters OK 05:27:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:04 Set A/D data flow result=40 05:27:04 Set A/D channel type result=40 05:27:04 Set A/D encoding result=40 05:27:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:04 Set channel filter=0.000000e+000 result=40 05:27:04 Config A/D Result=40 05:27:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:04 Get A/D filter: -9.255963e+061 result=40 05:27:04 Get A/D value=-858993460 result=40 05:27:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:04 Aux= 05:27:04 Message to Camera, serial 132303 queued 05:27:40 Received message from Master: op=PointingHead serial=132315 05:27:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:27:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:27:40 Point started: ret=0 05:27:40 point_skyscan result=0 05:27:41 Check angles 05:27:41 SkyScan query 05:27:41 SkyScan query done: ret=0 az=64.38<-4292 ze=-68.865<-16591 Statuses=0009 0009 05:27:41 Msec=0 True Az=64.38 Ze=-68.865 Az status=0009 Ze status=0009 05:27:42 Check angles 05:27:42 SkyScan query 05:27:42 SkyScan query done: ret=0 az=81.93<-5462 ze=-89.805<-17987 Statuses=0009 0009 05:27:42 Msec=750 True Az=81.93 Ze=-89.805 Az status=0009 Ze status=0009 05:27:42 Check angles 05:27:42 SkyScan query 05:27:43 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.79<-19386 Statuses=0009 0009 05:27:43 Msec=1500 True Az=99.39 Ze=-110.79 Az status=0009 Ze status=0009 05:27:43 Check angles 05:27:43 SkyScan query 05:27:44 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.7<-20780 Statuses=0009 0009 05:27:44 Msec=2250 True Az=116.805 Ze=-131.7 Az status=0009 Ze status=0009 05:27:44 Check angles 05:27:44 SkyScan query 05:27:44 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 05:27:44 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 05:27:45 Check angles 05:27:45 SkyScan query 05:27:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 05:27:45 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 05:27:45 Message to Master queued w/err=0: serial=132315 error=0 05:27:50 Received message from Master: op=Filter serial=132316 05:27:50 Color wheel filter change from 0 to 0 05:27:50 FLIGetFilterPos err=0 currentPosition=0 05:27:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:50 Filter is already there-color wheel unchanged 05:27:50 Received message from Master: op=Shutter serial=132317 05:27:50 Shutter LASER close 05:27:50 Received message from Camera: op=State serial=132319 05:27:50 GetSingleValue result=40 Value=cccccccc 05:27:50 SkyScan query 05:27:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:27:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:51 Parameters OK 05:27:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:51 Set A/D data flow result=40 05:27:51 Set A/D channel type result=40 05:27:51 Set A/D encoding result=40 05:27:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:51 Set channel filter=0.000000e+000 result=40 05:27:51 Config A/D Result=40 05:27:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:51 Get A/D filter: -9.255963e+061 result=40 05:27:51 Get A/D value=-858993460 result=40 05:27:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:51 Parameters OK 05:27:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:51 Set A/D data flow result=40 05:27:51 Set A/D channel type result=40 05:27:51 Set A/D encoding result=40 05:27:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:51 Set channel filter=0.000000e+000 result=40 05:27:51 Config A/D Result=40 05:27:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:51 Get A/D filter: -9.255963e+061 result=40 05:27:51 Get A/D value=-858993460 result=40 05:27:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:51 Aux= 05:27:51 Message to Camera, serial 132319 queued 05:28:28 Received message from Master: op=PointingHead serial=132332 05:28:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:28:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:28:28 Point started: ret=0 05:28:28 point_skyscan result=0 05:28:29 Check angles 05:28:29 SkyScan query 05:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0009 0009 05:28:29 Msec=0 True Az=112.995 Ze=-171.51 Az status=0009 Ze status=0009 05:28:30 Check angles 05:28:30 SkyScan query 05:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:28:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:28:30 Message to Master queued w/err=0: serial=132332 error=0 05:28:35 Received message from Master: op=Filter serial=132333 05:28:35 Color wheel filter change from 0 to 0 05:28:35 FLIGetFilterPos err=0 currentPosition=0 05:28:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:35 Filter is already there-color wheel unchanged 05:28:35 Received message from Master: op=Shutter serial=132334 05:28:35 Shutter LASER open 05:28:36 Received message from Camera: op=State serial=132336 05:28:36 GetSingleValue result=40 Value=cccccccc 05:28:36 SkyScan query 05:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:28:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:36 Parameters OK 05:28:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:36 Set A/D data flow result=40 05:28:36 Set A/D channel type result=40 05:28:36 Set A/D encoding result=40 05:28:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:36 Set channel filter=0.000000e+000 result=40 05:28:36 Config A/D Result=40 05:28:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:36 Get A/D filter: -9.255963e+061 result=40 05:28:36 Get A/D value=-858993460 result=40 05:28:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:36 Parameters OK 05:28:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:36 Set A/D data flow result=40 05:28:36 Set A/D channel type result=40 05:28:36 Set A/D encoding result=40 05:28:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:36 Set channel filter=0.000000e+000 result=40 05:28:36 Config A/D Result=40 05:28:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:36 Get A/D filter: -9.255963e+061 result=40 05:28:36 Get A/D value=-858993460 result=40 05:28:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:36 Aux= 05:28:36 Message to Camera, serial 132336 queued 05:28:45 Received message from Master: op=Shutter serial=132346 05:28:45 Shutter LASER close 05:28:45 Received message from Master: op=PointingHead serial=132350 05:28:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:28:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:28:45 Point started: ret=0 05:28:45 point_skyscan result=0 05:28:46 Check angles 05:28:46 SkyScan query 05:28:47 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.01<-21534 Statuses=0009 0009 05:28:47 Msec=0 True Az=136.17 Ze=-143.01 Az status=0009 Ze status=0009 05:28:47 Check angles 05:28:47 SkyScan query 05:28:48 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.025<-20135 Statuses=0009 0009 05:28:48 Msec=750 True Az=153.63 Ze=-122.025 Az status=0009 Ze status=0009 05:28:48 Check angles 05:28:48 SkyScan query 05:28:48 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.115<-18741 Statuses=0009 0009 05:28:48 Msec=1500 True Az=171.105 Ze=-101.115 Az status=0009 Ze status=0009 05:28:48 Check angles 05:28:48 SkyScan query 05:28:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.175<-17345 Statuses=0008 0009 05:28:49 Msec=2250 True Az=176.01 Ze=-80.175 Az status=0008 Ze status=0009 05:28:49 Check angles 05:28:49 SkyScan query 05:28:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.19<-15946 Statuses=0008 0009 05:28:50 Msec=3000 True Az=176.01 Ze=-59.19 Az status=0008 Ze status=0009 05:28:50 Check angles 05:28:50 SkyScan query 05:28:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:28:51 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:28:51 Message to Master queued w/err=0: serial=132350 error=0 05:28:56 Received message from Master: op=Filter serial=132351 05:28:56 Color wheel filter change from 0 to 0 05:28:56 FLIGetFilterPos err=0 currentPosition=0 05:28:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:56 Filter is already there-color wheel unchanged 05:28:56 Received message from Master: op=Shutter serial=132352 05:28:56 Shutter LASER close 05:28:56 Received message from Camera: op=State serial=132354 05:28:56 GetSingleValue result=40 Value=cccccccc 05:28:56 SkyScan query 05:28:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:28:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:56 Parameters OK 05:28:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:56 Set A/D data flow result=40 05:28:56 Set A/D channel type result=40 05:28:56 Set A/D encoding result=40 05:28:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:56 Set channel filter=0.000000e+000 result=40 05:28:56 Config A/D Result=40 05:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:56 Get A/D filter: -9.255963e+061 result=40 05:28:56 Get A/D value=-858993460 result=40 05:28:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:56 Parameters OK 05:28:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:56 Set A/D data flow result=40 05:28:56 Set A/D channel type result=40 05:28:56 Set A/D encoding result=40 05:28:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:56 Set channel filter=0.000000e+000 result=40 05:28:56 Config A/D Result=40 05:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:56 Get A/D filter: -9.255963e+061 result=40 05:28:56 Get A/D value=-858993460 result=40 05:28:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:56 Aux= 05:28:56 Message to Camera, serial 132354 queued 05:29:33 Received message from Master: op=PointingHead serial=132367 05:29:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:29:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:29:34 Point started: ret=0 05:29:34 point_skyscan result=0 05:29:34 Check angles 05:29:34 SkyScan query 05:29:35 SkyScan query done: ret=0 az=152.64<-10176 ze=-21.18<-13412 Statuses=0009 0009 05:29:35 Msec=0 True Az=152.64 Ze=-21.18 Az status=0009 Ze status=0009 05:29:35 Check angles 05:29:35 SkyScan query 05:29:36 SkyScan query done: ret=0 az=134.55<-8970 ze=0.195<-11987 Statuses=0009 0009 05:29:36 Msec=750 True Az=134.55 Ze=0.195 Az status=0009 Ze status=0009 05:29:36 Check angles 05:29:36 SkyScan query 05:29:36 SkyScan query done: ret=0 az=117.24<-7816 ze=21.18<-10588 Statuses=0009 0009 05:29:36 Msec=1500 True Az=117.24 Ze=21.18 Az status=0009 Ze status=0009 05:29:37 Check angles 05:29:37 SkyScan query 05:29:37 SkyScan query done: ret=0 az=99.84<-6656 ze=42.09<-9194 Statuses=0009 0009 05:29:37 Msec=2250 True Az=99.84 Ze=42.09 Az status=0009 Ze status=0009 05:29:37 Check angles 05:29:37 SkyScan query 05:29:38 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 05:29:38 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 05:29:38 Check angles 05:29:38 SkyScan query 05:29:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:29:39 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:29:39 Message to Master queued w/err=0: serial=132367 error=0 05:29:44 Received message from Master: op=Filter serial=132368 05:29:44 Color wheel filter change from 0 to 0 05:29:44 FLIGetFilterPos err=0 currentPosition=0 05:29:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:44 Filter is already there-color wheel unchanged 05:29:44 Received message from Master: op=Shutter serial=132369 05:29:44 Shutter LASER close 05:29:44 Received message from Camera: op=State serial=132371 05:29:44 GetSingleValue result=40 Value=cccccccc 05:29:44 SkyScan query 05:29:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:29:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:45 Parameters OK 05:29:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:45 Set A/D data flow result=40 05:29:45 Set A/D channel type result=40 05:29:45 Set A/D encoding result=40 05:29:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:45 Set channel filter=0.000000e+000 result=40 05:29:45 Config A/D Result=40 05:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:45 Get A/D filter: -9.255963e+061 result=40 05:29:45 Get A/D value=-858993460 result=40 05:29:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:45 Parameters OK 05:29:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:45 Set A/D data flow result=40 05:29:45 Set A/D channel type result=40 05:29:45 Set A/D encoding result=40 05:29:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:45 Set channel filter=0.000000e+000 result=40 05:29:45 Config A/D Result=40 05:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:45 Get A/D filter: -9.255963e+061 result=40 05:29:45 Get A/D value=-858993460 result=40 05:29:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:45 Aux= 05:29:45 Message to Camera, serial 132371 queued 05:30:21 Received message from Master: op=PointingHead serial=132384 05:30:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:30:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:30:22 Point started: ret=0 05:30:22 point_skyscan result=0 05:30:22 Check angles 05:30:22 SkyScan query 05:30:23 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 05:30:23 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 05:30:23 Check angles 05:30:23 SkyScan query 05:30:24 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 05:30:24 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 05:30:24 Check angles 05:30:24 SkyScan query 05:30:25 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 05:30:25 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 05:30:25 Check angles 05:30:25 SkyScan query 05:30:25 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 05:30:25 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 05:30:25 Check angles 05:30:25 SkyScan query 05:30:26 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:30:26 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:30:26 Check angles 05:30:26 SkyScan query 05:30:27 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:30:27 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:30:27 Message to Master queued w/err=0: serial=132384 error=0 05:30:32 Received message from Master: op=Filter serial=132385 05:30:32 Color wheel filter change from 0 to 0 05:30:32 FLIGetFilterPos err=0 currentPosition=0 05:30:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:32 Filter is already there-color wheel unchanged 05:30:32 Received message from Master: op=Shutter serial=132386 05:30:32 Shutter LASER close 05:30:32 Received message from Camera: op=State serial=132388 05:30:32 GetSingleValue result=40 Value=cccccccc 05:30:32 SkyScan query 05:30:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:30:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:33 Parameters OK 05:30:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:33 Set A/D data flow result=40 05:30:33 Set A/D channel type result=40 05:30:33 Set A/D encoding result=40 05:30:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:33 Set channel filter=0.000000e+000 result=40 05:30:33 Config A/D Result=40 05:30:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:33 Get A/D filter: -9.255963e+061 result=40 05:30:33 Get A/D value=-858993460 result=40 05:30:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:33 Parameters OK 05:30:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:33 Set A/D data flow result=40 05:30:33 Set A/D channel type result=40 05:30:33 Set A/D encoding result=40 05:30:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:33 Set channel filter=0.000000e+000 result=40 05:30:33 Config A/D Result=40 05:30:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:33 Get A/D filter: -9.255963e+061 result=40 05:30:33 Get A/D value=-858993460 result=40 05:30:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:33 Aux= 05:30:33 Message to Camera, serial 132388 queued 05:31:09 Received message from Master: op=PointingHead serial=132401 05:31:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:31:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:31:10 Point started: ret=0 05:31:10 point_skyscan result=0 05:31:11 Check angles 05:31:11 SkyScan query 05:31:11 SkyScan query done: ret=0 az=152.715<-10181 ze=8.37<-11442 Statuses=0009 0009 05:31:11 Msec=0 True Az=152.715 Ze=8.37 Az status=0009 Ze status=0009 05:31:11 Check angles 05:31:11 SkyScan query 05:31:12 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.54<-12836 Statuses=0009 0009 05:31:12 Msec=750 True Az=135.33 Ze=-12.54 Az status=0009 Ze status=0009 05:31:12 Check angles 05:31:12 SkyScan query 05:31:13 SkyScan query done: ret=0 az=117.465<-7831 ze=-33.96<-14264 Statuses=0009 0009 05:31:13 Msec=1500 True Az=117.465 Ze=-33.96 Az status=0009 Ze status=0009 05:31:13 Check angles 05:31:13 SkyScan query 05:31:13 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.57<-15438 Statuses=0009 0009 05:31:13 Msec=2250 True Az=100.02 Ze=-51.57 Az status=0009 Ze status=0009 05:31:14 Check angles 05:31:14 SkyScan query 05:31:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 05:31:14 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 05:31:14 Check angles 05:31:14 SkyScan query 05:31:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:31:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:31:15 Message to Master queued w/err=0: serial=132401 error=0 05:31:20 Received message from Master: op=Filter serial=132402 05:31:20 Color wheel filter change from 0 to 0 05:31:20 FLIGetFilterPos err=0 currentPosition=0 05:31:20 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:20 Filter is already there-color wheel unchanged 05:31:20 Received message from Master: op=Shutter serial=132403 05:31:20 Shutter LASER close 05:31:20 Received message from Camera: op=State serial=132405 05:31:20 GetSingleValue result=40 Value=cccccccc 05:31:20 SkyScan query 05:31:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:31:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:21 Parameters OK 05:31:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:21 Set A/D data flow result=40 05:31:21 Set A/D channel type result=40 05:31:21 Set A/D encoding result=40 05:31:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:21 Set channel filter=0.000000e+000 result=40 05:31:21 Config A/D Result=40 05:31:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:21 Get A/D filter: -9.255963e+061 result=40 05:31:21 Get A/D value=-858993460 result=40 05:31:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:21 Parameters OK 05:31:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:21 Set A/D data flow result=40 05:31:21 Set A/D channel type result=40 05:31:21 Set A/D encoding result=40 05:31:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:21 Set channel filter=0.000000e+000 result=40 05:31:21 Config A/D Result=40 05:31:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:21 Get A/D filter: -9.255963e+061 result=40 05:31:21 Get A/D value=-858993460 result=40 05:31:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:21 Aux= 05:31:21 Message to Camera, serial 132405 queued 05:31:58 Received message from Master: op=PointingHead serial=132418 05:31:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:31:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:31:58 Point started: ret=0 05:31:58 point_skyscan result=0 05:31:59 Check angles 05:31:59 SkyScan query 05:31:59 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.285<-17419 Statuses=0009 0009 05:31:59 Msec=0 True Az=108.99 Ze=-81.285 Az status=0009 Ze status=0009 05:31:59 Check angles 05:31:59 SkyScan query 05:32:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 05:32:00 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 05:32:00 Check angles 05:32:00 SkyScan query 05:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.225<-20215 Statuses=0008 0009 05:32:01 Msec=1500 True Az=112.995 Ze=-123.225 Az status=0008 Ze status=0009 05:32:01 Check angles 05:32:01 SkyScan query 05:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.18<-21612 Statuses=0008 0009 05:32:02 Msec=2250 True Az=112.995 Ze=-144.18 Az status=0008 Ze status=0009 05:32:02 Check angles 05:32:02 SkyScan query 05:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.12<-23008 Statuses=0008 0009 05:32:02 Msec=3000 True Az=112.995 Ze=-165.12 Az status=0008 Ze status=0009 05:32:02 Check angles 05:32:02 SkyScan query 05:32:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:32:03 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:32:03 Message to Master queued w/err=0: serial=132418 error=0 05:32:08 Received message from Master: op=Filter serial=132419 05:32:08 Color wheel filter change from 0 to 0 05:32:08 FLIGetFilterPos err=0 currentPosition=0 05:32:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:08 Filter is already there-color wheel unchanged 05:32:08 Received message from Master: op=Shutter serial=132420 05:32:08 Shutter LASER open 05:32:08 Received message from Camera: op=State serial=132422 05:32:08 GetSingleValue result=40 Value=cccccccc 05:32:08 SkyScan query 05:32:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:32:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:09 Parameters OK 05:32:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:09 Set A/D data flow result=40 05:32:09 Set A/D channel type result=40 05:32:09 Set A/D encoding result=40 05:32:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:09 Set channel filter=0.000000e+000 result=40 05:32:09 Config A/D Result=40 05:32:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:09 Get A/D filter: -9.255963e+061 result=40 05:32:09 Get A/D value=-858993460 result=40 05:32:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:09 Parameters OK 05:32:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:09 Set A/D data flow result=40 05:32:09 Set A/D channel type result=40 05:32:09 Set A/D encoding result=40 05:32:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:09 Set channel filter=0.000000e+000 result=40 05:32:09 Config A/D Result=40 05:32:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:09 Get A/D filter: -9.255963e+061 result=40 05:32:09 Get A/D value=-858993460 result=40 05:32:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:09 Aux= 05:32:09 Message to Camera, serial 132422 queued 05:32:17 Received message from Master: op=Shutter serial=132432 05:32:17 Shutter LASER close 05:32:18 Received message from Master: op=PointingHead serial=132436 05:32:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:32:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:32:18 Point started: ret=0 05:32:18 point_skyscan result=0 05:32:19 Check angles 05:32:19 SkyScan query 05:32:20 SkyScan query done: ret=0 az=89.52<-5968 ze=156.735<-1551 Statuses=0009 0009 05:32:20 Msec=0 True Az=89.52 Ze=156.735 Az status=0009 Ze status=0009 05:32:20 Check angles 05:32:20 SkyScan query 05:32:20 SkyScan query done: ret=0 az=72<-4800 ze=135.81<-2946 Statuses=0009 0009 05:32:20 Msec=750 True Az=72 Ze=135.81 Az status=0009 Ze status=0009 05:32:20 Check angles 05:32:20 SkyScan query 05:32:21 SkyScan query done: ret=0 az=54.555<-3637 ze=114.795<-4347 Statuses=0009 0009 05:32:21 Msec=1500 True Az=54.555 Ze=114.795 Az status=0009 Ze status=0009 05:32:21 Check angles 05:32:21 SkyScan query 05:32:22 SkyScan query done: ret=0 az=40.995<-2733 ze=93.87<-5742 Statuses=0009 0009 05:32:22 Msec=2250 True Az=40.995 Ze=93.87 Az status=0009 Ze status=0009 05:32:22 Check angles 05:32:22 SkyScan query 05:32:23 SkyScan query done: ret=0 az=40.995<-2733 ze=72.885<-7141 Statuses=0008 0009 05:32:23 Msec=3000 True Az=40.995 Ze=72.885 Az status=0008 Ze status=0009 05:32:23 Check angles 05:32:23 SkyScan query 05:32:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 05:32:23 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 05:32:23 Check angles 05:32:23 SkyScan query 05:32:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:32:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:32:24 Message to Master queued w/err=0: serial=132436 error=0 05:32:29 Received message from Master: op=Filter serial=132437 05:32:29 Color wheel filter change from 0 to 0 05:32:29 FLIGetFilterPos err=0 currentPosition=0 05:32:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:29 Filter is already there-color wheel unchanged 05:32:29 Received message from Master: op=Shutter serial=132438 05:32:29 Shutter LASER close 05:32:29 Received message from Camera: op=State serial=132440 05:32:29 GetSingleValue result=40 Value=cccccccc 05:32:29 SkyScan query 05:32:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:32:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:30 Parameters OK 05:32:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:30 Set A/D data flow result=40 05:32:30 Set A/D channel type result=40 05:32:30 Set A/D encoding result=40 05:32:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:30 Set channel filter=0.000000e+000 result=40 05:32:30 Config A/D Result=40 05:32:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:30 Get A/D filter: -9.255963e+061 result=40 05:32:30 Get A/D value=-858993460 result=40 05:32:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:30 Parameters OK 05:32:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:30 Set A/D data flow result=40 05:32:30 Set A/D channel type result=40 05:32:30 Set A/D encoding result=40 05:32:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:30 Set channel filter=0.000000e+000 result=40 05:32:30 Config A/D Result=40 05:32:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:30 Get A/D filter: -9.255963e+061 result=40 05:32:30 Get A/D value=-858993460 result=40 05:32:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:30 Aux= 05:32:30 Message to Camera, serial 132440 queued 05:33:07 Received message from Master: op=PointingHead serial=132453 05:33:07 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:33:07 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:33:07 Point started: ret=0 05:33:07 point_skyscan result=0 05:33:08 Check angles 05:33:08 SkyScan query 05:33:08 SkyScan query done: ret=0 az=64.005<-4267 ze=66.54<-7564 Statuses=0009 0008 05:33:08 Msec=0 True Az=64.005 Ze=66.54 Az status=0009 Ze status=0008 05:33:09 Check angles 05:33:09 SkyScan query 05:33:09 SkyScan query done: ret=0 az=81.795<-5453 ze=66.495<-7567 Statuses=0009 0008 05:33:09 Msec=750 True Az=81.795 Ze=66.495 Az status=0009 Ze status=0008 05:33:09 Check angles 05:33:09 SkyScan query 05:33:10 SkyScan query done: ret=0 az=99.27<-6618 ze=66.495<-7567 Statuses=0009 0008 05:33:10 Msec=1500 True Az=99.27 Ze=66.495 Az status=0009 Ze status=0008 05:33:10 Check angles 05:33:10 SkyScan query 05:33:11 SkyScan query done: ret=0 az=116.775<-7785 ze=66.495<-7567 Statuses=0009 0008 05:33:11 Msec=2250 True Az=116.775 Ze=66.495 Az status=0009 Ze status=0008 05:33:11 Check angles 05:33:11 SkyScan query 05:33:12 SkyScan query done: ret=0 az=134.22<-8948 ze=66.495<-7567 Statuses=0009 0008 05:33:12 Msec=3000 True Az=134.22 Ze=66.495 Az status=0009 Ze status=0008 05:33:12 Check angles 05:33:12 SkyScan query 05:33:12 SkyScan query done: ret=0 az=151.635<-10109 ze=66.495<-7567 Statuses=0009 0008 05:33:12 Msec=3750 True Az=151.635 Ze=66.495 Az status=0009 Ze status=0008 05:33:12 Check angles 05:33:12 SkyScan query 05:33:13 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:33:13 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:33:13 Message to Master queued w/err=0: serial=132453 error=0 05:33:18 Received message from Master: op=Filter serial=132454 05:33:18 Color wheel filter change from 0 to 0 05:33:18 FLIGetFilterPos err=0 currentPosition=0 05:33:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:18 Filter is already there-color wheel unchanged 05:33:18 Received message from Master: op=Shutter serial=132455 05:33:18 Shutter LASER close 05:33:18 Received message from Camera: op=State serial=132457 05:33:18 GetSingleValue result=40 Value=cccccccc 05:33:18 SkyScan query 05:33:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:33:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:19 Parameters OK 05:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:19 Set A/D data flow result=40 05:33:19 Set A/D channel type result=40 05:33:19 Set A/D encoding result=40 05:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:19 Set channel filter=0.000000e+000 result=40 05:33:19 Config A/D Result=40 05:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:19 Get A/D filter: -9.255963e+061 result=40 05:33:19 Get A/D value=-858993460 result=40 05:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:19 Parameters OK 05:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:19 Set A/D data flow result=40 05:33:19 Set A/D channel type result=40 05:33:19 Set A/D encoding result=40 05:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:19 Set channel filter=0.000000e+000 result=40 05:33:19 Config A/D Result=40 05:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:19 Get A/D filter: -9.255963e+061 result=40 05:33:19 Get A/D value=-858993460 result=40 05:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:19 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:19 Aux= 05:33:19 Message to Camera, serial 132457 queued 05:33:56 Received message from Master: op=PointingHead serial=132470 05:33:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:33:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:33:56 Point started: ret=0 05:33:56 point_skyscan result=0 05:33:57 Check angles 05:33:57 SkyScan query 05:33:57 SkyScan query done: ret=0 az=135.12<-9008 ze=36.87<-9542 Statuses=0009 0009 05:33:57 Msec=0 True Az=135.12 Ze=36.87 Az status=0009 Ze status=0009 05:33:57 Check angles 05:33:57 SkyScan query 05:33:58 SkyScan query done: ret=0 az=117.675<-7845 ze=15.9<-10940 Statuses=0009 0009 05:33:58 Msec=750 True Az=117.675 Ze=15.9 Az status=0009 Ze status=0009 05:33:58 Check angles 05:33:58 SkyScan query 05:33:59 SkyScan query done: ret=0 az=100.275<-6685 ze=-5.04<-12336 Statuses=0009 0009 05:33:59 Msec=1500 True Az=100.275 Ze=-5.04 Az status=0009 Ze status=0009 05:33:59 Check angles 05:33:59 SkyScan query 05:34:00 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.385<-13759 Statuses=0009 0009 05:34:00 Msec=2250 True Az=82.41 Ze=-26.385 Az status=0009 Ze status=0009 05:34:00 Check angles 05:34:00 SkyScan query 05:34:00 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.58<-14572 Statuses=0009 0008 05:34:00 Msec=3000 True Az=64.92 Ze=-38.58 Az status=0009 Ze status=0008 05:34:00 Check angles 05:34:00 SkyScan query 05:34:01 SkyScan query done: ret=0 az=47.46<-3164 ze=-38.52<-14568 Statuses=0009 0008 05:34:01 Msec=3750 True Az=47.46 Ze=-38.52 Az status=0009 Ze status=0008 05:34:01 Check angles 05:34:01 SkyScan query 05:34:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:34:02 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:34:02 Message to Master queued w/err=0: serial=132470 error=0 05:34:07 Received message from Master: op=Filter serial=132471 05:34:07 Color wheel filter change from 0 to 0 05:34:07 FLIGetFilterPos err=0 currentPosition=0 05:34:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:07 Filter is already there-color wheel unchanged 05:34:07 Received message from Master: op=Shutter serial=132472 05:34:07 Shutter LASER close 05:34:07 Received message from Camera: op=State serial=132474 05:34:07 GetSingleValue result=40 Value=cccccccc 05:34:07 SkyScan query 05:34:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:34:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:08 Parameters OK 05:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:08 Set A/D data flow result=40 05:34:08 Set A/D channel type result=40 05:34:08 Set A/D encoding result=40 05:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:08 Set channel filter=0.000000e+000 result=40 05:34:08 Config A/D Result=40 05:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:08 Get A/D filter: -9.255963e+061 result=40 05:34:08 Get A/D value=-858993460 result=40 05:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:08 Parameters OK 05:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:08 Set A/D data flow result=40 05:34:08 Set A/D channel type result=40 05:34:08 Set A/D encoding result=40 05:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:08 Set channel filter=0.000000e+000 result=40 05:34:08 Config A/D Result=40 05:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:08 Get A/D filter: -9.255963e+061 result=40 05:34:08 Get A/D value=-858993460 result=40 05:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:08 Aux= 05:34:08 Message to Camera, serial 132474 queued 05:34:44 Received message from Master: op=PointingHead serial=132487 05:34:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:34:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:34:45 Point started: ret=0 05:34:45 point_skyscan result=0 05:34:46 Check angles 05:34:46 SkyScan query 05:34:46 SkyScan query done: ret=0 az=64.05<-4270 ze=-68.34<-16556 Statuses=0009 0009 05:34:46 Msec=0 True Az=64.05 Ze=-68.34 Az status=0009 Ze status=0009 05:34:46 Check angles 05:34:46 SkyScan query 05:34:47 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.325<-17955 Statuses=0009 0009 05:34:47 Msec=750 True Az=81.57 Ze=-89.325 Az status=0009 Ze status=0009 05:34:47 Check angles 05:34:47 SkyScan query 05:34:48 SkyScan query done: ret=0 az=98.985<-6599 ze=-110.25<-19350 Statuses=0009 0009 05:34:48 Msec=1500 True Az=98.985 Ze=-110.25 Az status=0009 Ze status=0009 05:34:48 Check angles 05:34:48 SkyScan query 05:34:48 SkyScan query done: ret=0 az=116.595<-7773 ze=-131.205<-20747 Statuses=0009 0009 05:34:48 Msec=2250 True Az=116.595 Ze=-131.205 Az status=0009 Ze status=0009 05:34:49 Check angles 05:34:49 SkyScan query 05:34:49 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 05:34:49 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 05:34:49 Check angles 05:34:49 SkyScan query 05:34:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 05:34:50 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 05:34:50 Message to Master queued w/err=0: serial=132487 error=0 05:34:55 Received message from Master: op=Filter serial=132488 05:34:55 Color wheel filter change from 0 to 0 05:34:55 FLIGetFilterPos err=0 currentPosition=0 05:34:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:55 Filter is already there-color wheel unchanged 05:34:55 Received message from Master: op=Shutter serial=132489 05:34:55 Shutter LASER close 05:34:55 Received message from Camera: op=State serial=132491 05:34:55 GetSingleValue result=40 Value=cccccccc 05:34:55 SkyScan query 05:34:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:34:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:56 Parameters OK 05:34:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:56 Set A/D data flow result=40 05:34:56 Set A/D channel type result=40 05:34:56 Set A/D encoding result=40 05:34:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:56 Set channel filter=0.000000e+000 result=40 05:34:56 Config A/D Result=40 05:34:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:56 Get A/D filter: -9.255963e+061 result=40 05:34:56 Get A/D value=-858993460 result=40 05:34:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:56 Parameters OK 05:34:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:56 Set A/D data flow result=40 05:34:56 Set A/D channel type result=40 05:34:56 Set A/D encoding result=40 05:34:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:56 Set channel filter=0.000000e+000 result=40 05:34:56 Config A/D Result=40 05:34:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:56 Get A/D filter: -9.255963e+061 result=40 05:34:56 Get A/D value=-858993460 result=40 05:34:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:56 Aux= 05:34:56 Message to Camera, serial 132491 queued 05:35:33 Received message from Master: op=PointingHead serial=132504 05:35:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:35:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:35:33 Point started: ret=0 05:35:33 point_skyscan result=0 05:35:34 Check angles 05:35:34 SkyScan query 05:35:34 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 05:35:34 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 05:35:34 Check angles 05:35:34 SkyScan query 05:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:35:35 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:35:35 Message to Master queued w/err=0: serial=132504 error=0 05:35:40 Received message from Master: op=Filter serial=132505 05:35:40 Color wheel filter change from 0 to 0 05:35:40 FLIGetFilterPos err=0 currentPosition=0 05:35:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:40 Filter is already there-color wheel unchanged 05:35:40 Received message from Master: op=Shutter serial=132506 05:35:40 Shutter LASER open 05:35:40 Received message from Camera: op=State serial=132508 05:35:40 GetSingleValue result=40 Value=cccccccc 05:35:40 SkyScan query 05:35:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:35:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:41 Parameters OK 05:35:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:41 Set A/D data flow result=40 05:35:41 Set A/D channel type result=40 05:35:41 Set A/D encoding result=40 05:35:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:41 Set channel filter=0.000000e+000 result=40 05:35:41 Config A/D Result=40 05:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:41 Get A/D filter: -9.255963e+061 result=40 05:35:41 Get A/D value=-858993460 result=40 05:35:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:41 Parameters OK 05:35:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:41 Set A/D data flow result=40 05:35:41 Set A/D channel type result=40 05:35:41 Set A/D encoding result=40 05:35:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:41 Set channel filter=0.000000e+000 result=40 05:35:41 Config A/D Result=40 05:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:41 Get A/D filter: -9.255963e+061 result=40 05:35:41 Get A/D value=-858993460 result=40 05:35:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:41 Aux= 05:35:41 Message to Camera, serial 132508 queued 05:35:49 Received message from Master: op=Shutter serial=132518 05:35:49 Shutter LASER close 05:35:50 Received message from Master: op=PointingHead serial=132522 05:35:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:35:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:35:50 Point started: ret=0 05:35:50 point_skyscan result=0 05:35:51 Check angles 05:35:51 SkyScan query 05:35:52 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.355<-21557 Statuses=0009 0009 05:35:52 Msec=0 True Az=135.81 Ze=-143.355 Az status=0009 Ze status=0009 05:35:52 Check angles [UTC 2018-12-14 05:35:52] 05:35:52 SkyScan query 05:35:52 SkyScan query done: ret=0 az=154.89<-10326 ze=-120.615<-20041 Statuses=0009 0009 05:35:52 Msec=750 True Az=154.89 Ze=-120.615 Az status=0009 Ze status=0009 [UTC 2018-12-14 05:35:52] 05:35:52 Check angles 05:35:52 SkyScan query 05:35:53 SkyScan query done: ret=0 az=170.865<-11391 ze=-101.49<-18766 Statuses=0009 0009 05:35:53 Msec=1500 True Az=170.865 Ze=-101.49 Az status=0009 Ze status=0009 05:35:53 Check angles 05:35:53 SkyScan query 05:35:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.505<-17367 Statuses=0008 0009 05:35:54 Msec=2250 True Az=176.01 Ze=-80.505 Az status=0008 Ze status=0009 05:35:54 Check angles 05:35:54 SkyScan query 05:35:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.565<-15971 Statuses=0008 0009 05:35:55 Msec=3000 True Az=176.01 Ze=-59.565 Az status=0008 Ze status=0009 05:35:55 Check angles 05:35:55 SkyScan query 05:35:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 05:35:55 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 05:35:55 Message to Master queued w/err=0: serial=132522 error=0 05:36:00 Received message from Master: op=Filter serial=132523 05:36:00 Color wheel filter change from 0 to 0 05:36:00 FLIGetFilterPos err=0 currentPosition=0 05:36:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:00 Filter is already there-color wheel unchanged 05:36:00 Received message from Master: op=Shutter serial=132524 05:36:00 Shutter LASER close 05:36:01 Received message from Camera: op=State serial=132526 05:36:01 GetSingleValue result=40 Value=cccccccc 05:36:01 SkyScan query 05:36:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:36:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:01 Parameters OK 05:36:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:01 Set A/D data flow result=40 05:36:01 Set A/D channel type result=40 05:36:01 Set A/D encoding result=40 05:36:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:01 Set channel filter=0.000000e+000 result=40 05:36:01 Config A/D Result=40 05:36:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:01 Get A/D filter: -9.255963e+061 result=40 05:36:01 Get A/D value=-858993460 result=40 05:36:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:01 Parameters OK 05:36:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:01 Set A/D data flow result=40 05:36:01 Set A/D channel type result=40 05:36:01 Set A/D encoding result=40 05:36:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:01 Set channel filter=0.000000e+000 result=40 05:36:01 Config A/D Result=40 05:36:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:01 Get A/D filter: -9.255963e+061 result=40 05:36:01 Get A/D value=-858993460 result=40 05:36:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:01 Aux= 05:36:01 Message to Camera, serial 132526 queued 05:36:37 Received message from Master: op=PointingHead serial=132538 05:36:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:36:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:36:37 Point started: ret=0 05:36:37 point_skyscan result=0 05:36:38 Check angles 05:36:38 SkyScan query 05:36:39 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.45<-13430 Statuses=0009 0009 05:36:39 Msec=0 True Az=152.76 Ze=-21.45 Az status=0009 Ze status=0009 05:36:39 Check angles 05:36:39 SkyScan query 05:36:40 SkyScan query done: ret=0 az=134.895<-8993 ze=-0.015<-12001 Statuses=0009 0009 05:36:40 Msec=750 True Az=134.895 Ze=-0.015 Az status=0009 Ze status=0009 05:36:40 Check angles 05:36:40 SkyScan query 05:36:40 SkyScan query done: ret=0 az=117.405<-7827 ze=20.955<-10603 Statuses=0009 0009 05:36:40 Msec=1500 True Az=117.405 Ze=20.955 Az status=0009 Ze status=0009 05:36:40 Check angles 05:36:40 SkyScan query 05:36:41 SkyScan query done: ret=0 az=100.035<-6669 ze=41.91<-9206 Statuses=0009 0009 05:36:41 Msec=2250 True Az=100.035 Ze=41.91 Az status=0009 Ze status=0009 05:36:41 Check angles 05:36:41 SkyScan query 05:36:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 05:36:42 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 05:36:42 Check angles 05:36:42 SkyScan query 05:36:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:36:43 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:36:43 Message to Master queued w/err=0: serial=132538 error=0 05:36:48 Received message from Master: op=Filter serial=132539 05:36:48 Color wheel filter change from 0 to 0 05:36:48 FLIGetFilterPos err=0 currentPosition=0 05:36:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:48 Filter is already there-color wheel unchanged 05:36:48 Received message from Master: op=Shutter serial=132540 05:36:48 Shutter LASER close 05:36:48 Received message from Camera: op=State serial=132542 05:36:48 GetSingleValue result=40 Value=cccccccc 05:36:48 SkyScan query 05:36:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:36:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:48 Parameters OK 05:36:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:48 Set A/D data flow result=40 05:36:48 Set A/D channel type result=40 05:36:48 Set A/D encoding result=40 05:36:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:48 Set channel filter=0.000000e+000 result=40 05:36:48 Config A/D Result=40 05:36:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:48 Get A/D filter: -9.255963e+061 result=40 05:36:48 Get A/D value=-858993460 result=40 05:36:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:48 Parameters OK 05:36:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:48 Set A/D data flow result=40 05:36:48 Set A/D channel type result=40 05:36:48 Set A/D encoding result=40 05:36:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:48 Set channel filter=0.000000e+000 result=40 05:36:48 Config A/D Result=40 05:36:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:48 Get A/D filter: -9.255963e+061 result=40 05:36:48 Get A/D value=-858993460 result=40 05:36:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:48 Aux= 05:36:48 Message to Camera, serial 132542 queued 05:37:25 Received message from Master: op=PointingHead serial=132555 05:37:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:37:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:37:26 Point started: ret=0 05:37:26 point_skyscan result=0 05:37:26 Check angles 05:37:26 SkyScan query 05:37:27 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 05:37:27 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 05:37:27 Check angles 05:37:27 SkyScan query 05:37:28 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 05:37:28 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 05:37:28 Check angles 05:37:28 SkyScan query 05:37:28 SkyScan query done: ret=0 az=143.88<-9592 ze=38.505<-9433 Statuses=0009 0008 05:37:28 Msec=1500 True Az=143.88 Ze=38.505 Az status=0009 Ze status=0008 05:37:29 Check angles 05:37:29 SkyScan query 05:37:29 SkyScan query done: ret=0 az=161.28<-10752 ze=38.505<-9433 Statuses=0009 0008 05:37:29 Msec=2250 True Az=161.28 Ze=38.505 Az status=0009 Ze status=0008 05:37:29 Check angles 05:37:29 SkyScan query 05:37:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:37:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:37:30 Check angles 05:37:30 SkyScan query 05:37:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:37:31 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:37:31 Message to Master queued w/err=0: serial=132555 error=0 05:37:36 Received message from Master: op=Filter serial=132556 05:37:36 Color wheel filter change from 0 to 0 05:37:36 FLIGetFilterPos err=0 currentPosition=0 05:37:36 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:36 Filter is already there-color wheel unchanged 05:37:36 Received message from Master: op=Shutter serial=132557 05:37:36 Shutter LASER close 05:37:36 Received message from Camera: op=State serial=132559 05:37:36 GetSingleValue result=40 Value=cccccccc 05:37:36 SkyScan query 05:37:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:37:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:36 Parameters OK 05:37:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:36 Set A/D data flow result=40 05:37:36 Set A/D channel type result=40 05:37:36 Set A/D encoding result=40 05:37:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:36 Set channel filter=0.000000e+000 result=40 05:37:36 Config A/D Result=40 05:37:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:36 Get A/D filter: -9.255963e+061 result=40 05:37:36 Get A/D value=-858993460 result=40 05:37:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:36 Parameters OK 05:37:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:36 Set A/D data flow result=40 05:37:36 Set A/D channel type result=40 05:37:36 Set A/D encoding result=40 05:37:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:36 Set channel filter=0.000000e+000 result=40 05:37:36 Config A/D Result=40 05:37:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:36 Get A/D filter: -9.255963e+061 result=40 05:37:36 Get A/D value=-858993460 result=40 05:37:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:36 Aux= 05:37:36 Message to Camera, serial 132559 queued 05:38:13 Received message from Master: op=PointingHead serial=132572 05:38:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:38:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:38:14 Point started: ret=0 05:38:14 point_skyscan result=0 05:38:14 Check angles 05:38:14 SkyScan query 05:38:15 SkyScan query done: ret=0 az=152.91<-10194 ze=8.49<-11434 Statuses=0009 0009 05:38:15 Msec=0 True Az=152.91 Ze=8.49 Az status=0009 Ze status=0009 05:38:15 Check angles 05:38:15 SkyScan query 05:38:16 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.435<-12829 Statuses=0009 0009 05:38:16 Msec=750 True Az=135.36 Ze=-12.435 Az status=0009 Ze status=0009 05:38:16 Check angles 05:38:16 SkyScan query 05:38:16 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.87<-14258 Statuses=0009 0009 05:38:16 Msec=1500 True Az=117.54 Ze=-33.87 Az status=0009 Ze status=0009 05:38:17 Check angles 05:38:17 SkyScan query 05:38:17 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.57<-15438 Statuses=0009 0009 05:38:17 Msec=2250 True Az=100.035 Ze=-51.57 Az status=0009 Ze status=0009 05:38:17 Check angles 05:38:17 SkyScan query 05:38:18 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:38:18 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:38:18 Check angles 05:38:18 SkyScan query 05:38:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:38:19 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:38:19 Message to Master queued w/err=0: serial=132572 error=0 05:38:24 Received message from Master: op=Filter serial=132573 05:38:24 Color wheel filter change from 0 to 0 05:38:24 FLIGetFilterPos err=0 currentPosition=0 05:38:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:24 Filter is already there-color wheel unchanged 05:38:24 Received message from Master: op=Shutter serial=132574 05:38:24 Shutter LASER close 05:38:24 Received message from Camera: op=State serial=132576 05:38:24 GetSingleValue result=40 Value=cccccccc 05:38:24 SkyScan query 05:38:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:38:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:25 Parameters OK 05:38:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:25 Set A/D data flow result=40 05:38:25 Set A/D channel type result=40 05:38:25 Set A/D encoding result=40 05:38:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:25 Set channel filter=0.000000e+000 result=40 05:38:25 Config A/D Result=40 05:38:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:25 Get A/D filter: -9.255963e+061 result=40 05:38:25 Get A/D value=-858993460 result=40 05:38:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:25 Parameters OK 05:38:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:25 Set A/D data flow result=40 05:38:25 Set A/D channel type result=40 05:38:25 Set A/D encoding result=40 05:38:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:25 Set channel filter=0.000000e+000 result=40 05:38:25 Config A/D Result=40 05:38:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:25 Get A/D filter: -9.255963e+061 result=40 05:38:25 Get A/D value=-858993460 result=40 05:38:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:25 Aux= 05:38:25 Message to Camera, serial 132576 queued 05:39:01 Received message from Master: op=PointingHead serial=132589 05:39:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:39:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:39:02 Point started: ret=0 05:39:02 point_skyscan result=0 05:39:02 Check angles 05:39:02 SkyScan query 05:39:03 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.51<-17434 Statuses=0009 0009 05:39:03 Msec=0 True Az=109.14 Ze=-81.51 Az status=0009 Ze status=0009 05:39:03 Check angles 05:39:03 SkyScan query 05:39:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 05:39:04 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 05:39:04 Check angles 05:39:04 SkyScan query 05:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 05:39:05 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 05:39:05 Check angles 05:39:05 SkyScan query 05:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 05:39:05 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 05:39:05 Check angles 05:39:05 SkyScan query 05:39:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.3<-23020 Statuses=0008 0009 05:39:06 Msec=3000 True Az=112.995 Ze=-165.3 Az status=0008 Ze status=0009 05:39:06 Check angles 05:39:06 SkyScan query 05:39:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:39:07 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:39:07 Message to Master queued w/err=0: serial=132589 error=0 05:39:12 Received message from Master: op=Filter serial=132590 05:39:12 Color wheel filter change from 0 to 0 05:39:12 FLIGetFilterPos err=0 currentPosition=0 05:39:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:12 Filter is already there-color wheel unchanged 05:39:12 Received message from Master: op=Shutter serial=132591 05:39:12 Shutter LASER open 05:39:12 Received message from Camera: op=State serial=132593 05:39:12 GetSingleValue result=40 Value=cccccccc 05:39:12 SkyScan query 05:39:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:39:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:13 Parameters OK 05:39:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:13 Set A/D data flow result=40 05:39:13 Set A/D channel type result=40 05:39:13 Set A/D encoding result=40 05:39:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:13 Set channel filter=0.000000e+000 result=40 05:39:13 Config A/D Result=40 05:39:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:13 Get A/D filter: -9.255963e+061 result=40 05:39:13 Get A/D value=-858993460 result=40 05:39:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:13 Parameters OK 05:39:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:13 Set A/D data flow result=40 05:39:13 Set A/D channel type result=40 05:39:13 Set A/D encoding result=40 05:39:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:13 Set channel filter=0.000000e+000 result=40 05:39:13 Config A/D Result=40 05:39:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:13 Get A/D filter: -9.255963e+061 result=40 05:39:13 Get A/D value=-858993460 result=40 05:39:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:13 Aux= 05:39:13 Message to Camera, serial 132593 queued 05:39:21 Received message from Master: op=Shutter serial=132603 05:39:21 Shutter LASER close 05:39:22 Received message from Master: op=PointingHead serial=132607 05:39:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:39:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:39:22 Point started: ret=0 05:39:22 point_skyscan result=0 05:39:23 Check angles 05:39:23 SkyScan query 05:39:23 SkyScan query done: ret=0 az=89.955<-5997 ze=157.305<-1513 Statuses=0009 0009 05:39:23 Msec=0 True Az=89.955 Ze=157.305 Az status=0009 Ze status=0009 05:39:23 Check angles 05:39:23 SkyScan query 05:39:24 SkyScan query done: ret=0 az=72.525<-4835 ze=136.335<-2911 Statuses=0009 0009 05:39:24 Msec=750 True Az=72.525 Ze=136.335 Az status=0009 Ze status=0009 05:39:24 Check angles 05:39:24 SkyScan query 05:39:25 SkyScan query done: ret=0 az=55.125<-3675 ze=115.395<-4307 Statuses=0009 0009 05:39:25 Msec=1500 True Az=55.125 Ze=115.395 Az status=0009 Ze status=0009 05:39:25 Check angles 05:39:25 SkyScan query 05:39:25 SkyScan query done: ret=0 az=40.995<-2733 ze=94.425<-5705 Statuses=0009 0009 05:39:25 Msec=2250 True Az=40.995 Ze=94.425 Az status=0009 Ze status=0009 05:39:26 Check angles 05:39:26 SkyScan query 05:39:26 SkyScan query done: ret=0 az=40.995<-2733 ze=73.485<-7101 Statuses=0008 0009 05:39:26 Msec=3000 True Az=40.995 Ze=73.485 Az status=0008 Ze status=0009 05:39:26 Check angles 05:39:26 SkyScan query 05:39:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 05:39:27 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 05:39:27 Check angles 05:39:27 SkyScan query 05:39:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:39:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:39:28 Message to Master queued w/err=0: serial=132607 error=0 05:39:33 Received message from Master: op=Filter serial=132608 05:39:33 Color wheel filter change from 0 to 0 05:39:33 FLIGetFilterPos err=0 currentPosition=0 05:39:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:33 Filter is already there-color wheel unchanged 05:39:33 Received message from Master: op=Shutter serial=132609 05:39:33 Shutter LASER close 05:39:33 Received message from Camera: op=State serial=132611 05:39:33 GetSingleValue result=40 Value=cccccccc 05:39:33 SkyScan query 05:39:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:39:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:34 Parameters OK 05:39:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:34 Set A/D data flow result=40 05:39:34 Set A/D channel type result=40 05:39:34 Set A/D encoding result=40 05:39:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:34 Set channel filter=0.000000e+000 result=40 05:39:34 Config A/D Result=40 05:39:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:34 Get A/D filter: -9.255963e+061 result=40 05:39:34 Get A/D value=-858993460 result=40 05:39:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:34 Parameters OK 05:39:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:34 Set A/D data flow result=40 05:39:34 Set A/D channel type result=40 05:39:34 Set A/D encoding result=40 05:39:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:34 Set channel filter=0.000000e+000 result=40 05:39:34 Config A/D Result=40 05:39:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:34 Get A/D filter: -9.255963e+061 result=40 05:39:34 Get A/D value=-858993460 result=40 05:39:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:34 Aux= 05:39:34 Message to Camera, serial 132611 queued 05:40:10 Received message from Master: op=PointingHead serial=132624 05:40:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:40:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:40:11 Point started: ret=0 05:40:11 point_skyscan result=0 05:40:12 Check angles 05:40:12 SkyScan query 05:40:12 SkyScan query done: ret=0 az=64.35<-4290 ze=66.555<-7563 Statuses=0009 0008 05:40:12 Msec=0 True Az=64.35 Ze=66.555 Az status=0009 Ze status=0008 05:40:12 Check angles 05:40:12 SkyScan query 05:40:13 SkyScan query done: ret=0 az=82.26<-5484 ze=66.495<-7567 Statuses=0009 0008 05:40:13 Msec=750 True Az=82.26 Ze=66.495 Az status=0009 Ze status=0008 05:40:13 Check angles 05:40:13 SkyScan query 05:40:14 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 05:40:14 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 05:40:14 Check angles 05:40:14 SkyScan query 05:40:14 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 05:40:14 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 05:40:15 Check angles 05:40:15 SkyScan query 05:40:15 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 05:40:15 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 05:40:15 Check angles 05:40:15 SkyScan query 05:40:16 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 05:40:16 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 05:40:16 Check angles 05:40:16 SkyScan query 05:40:17 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:40:17 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:40:17 Message to Master queued w/err=0: serial=132624 error=0 05:40:22 Received message from Master: op=Filter serial=132625 05:40:22 Color wheel filter change from 0 to 0 05:40:22 FLIGetFilterPos err=0 currentPosition=0 05:40:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:22 Filter is already there-color wheel unchanged 05:40:22 Received message from Master: op=Shutter serial=132626 05:40:22 Shutter LASER close 05:40:22 Received message from Camera: op=State serial=132628 05:40:22 GetSingleValue result=40 Value=cccccccc 05:40:22 SkyScan query 05:40:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:40:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:22 Parameters OK 05:40:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:22 Set A/D data flow result=40 05:40:22 Set A/D channel type result=40 05:40:22 Set A/D encoding result=40 05:40:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:22 Set channel filter=0.000000e+000 result=40 05:40:22 Config A/D Result=40 05:40:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:22 Get A/D filter: -9.255963e+061 result=40 05:40:22 Get A/D value=-858993460 result=40 05:40:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:22 Parameters OK 05:40:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:22 Set A/D data flow result=40 05:40:22 Set A/D channel type result=40 05:40:22 Set A/D encoding result=40 05:40:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:22 Set channel filter=0.000000e+000 result=40 05:40:22 Config A/D Result=40 05:40:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:22 Get A/D filter: -9.255963e+061 result=40 05:40:22 Get A/D value=-858993460 result=40 05:40:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:22 Aux= 05:40:22 Message to Camera, serial 132628 queued 05:40:59 Received message from Master: op=PointingHead serial=132641 05:40:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:40:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:41:00 Point started: ret=0 05:41:00 point_skyscan result=0 05:41:00 Check angles 05:41:00 SkyScan query 05:41:01 SkyScan query done: ret=0 az=134.985<-8999 ze=36.675<-9555 Statuses=0009 0009 05:41:01 Msec=0 True Az=134.985 Ze=36.675 Az status=0009 Ze status=0009 05:41:01 Check angles 05:41:01 SkyScan query 05:41:02 SkyScan query done: ret=0 az=117.105<-7807 ze=15.33<-10978 Statuses=0009 0009 05:41:02 Msec=750 True Az=117.105 Ze=15.33 Az status=0009 Ze status=0009 05:41:02 Check angles 05:41:02 SkyScan query 05:41:03 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.67<-12378 Statuses=0009 0009 05:41:03 Msec=1500 True Az=99.795 Ze=-5.67 Az status=0009 Ze status=0009 05:41:03 Check angles 05:41:03 SkyScan query 05:41:03 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.64<-13776 Statuses=0009 0009 05:41:03 Msec=2250 True Az=82.23 Ze=-26.64 Az status=0009 Ze status=0009 05:41:03 Check angles 05:41:03 SkyScan query 05:41:04 SkyScan query done: ret=0 az=64.65<-4310 ze=-38.58<-14572 Statuses=0009 0008 05:41:04 Msec=3000 True Az=64.65 Ze=-38.58 Az status=0009 Ze status=0008 05:41:04 Check angles 05:41:04 SkyScan query 05:41:05 SkyScan query done: ret=0 az=47.265<-3151 ze=-38.52<-14568 Statuses=0009 0008 05:41:05 Msec=3750 True Az=47.265 Ze=-38.52 Az status=0009 Ze status=0008 05:41:05 Check angles 05:41:05 SkyScan query 05:41:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:41:06 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:41:06 Message to Master queued w/err=0: serial=132641 error=0 05:41:11 Received message from Master: op=Filter serial=132642 05:41:11 Color wheel filter change from 0 to 0 05:41:11 FLIGetFilterPos err=0 currentPosition=0 05:41:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:11 Filter is already there-color wheel unchanged 05:41:11 Received message from Master: op=Shutter serial=132643 05:41:11 Shutter LASER close 05:41:11 Received message from Camera: op=State serial=132645 05:41:11 GetSingleValue result=40 Value=cccccccc 05:41:11 SkyScan query 05:41:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:41:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:11 Parameters OK 05:41:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:11 Set A/D data flow result=40 05:41:11 Set A/D channel type result=40 05:41:11 Set A/D encoding result=40 05:41:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:11 Set channel filter=0.000000e+000 result=40 05:41:11 Config A/D Result=40 05:41:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:11 Get A/D filter: -9.255963e+061 result=40 05:41:11 Get A/D value=-858993460 result=40 05:41:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:11 Parameters OK 05:41:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:11 Set A/D data flow result=40 05:41:11 Set A/D channel type result=40 05:41:11 Set A/D encoding result=40 05:41:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:11 Set channel filter=0.000000e+000 result=40 05:41:11 Config A/D Result=40 05:41:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:11 Get A/D filter: -9.255963e+061 result=40 05:41:11 Get A/D value=-858993460 result=40 05:41:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:11 Aux= 05:41:11 Message to Camera, serial 132645 queued 05:41:47 Received message from Master: op=PointingHead serial=132657 05:41:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:41:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:41:48 Point started: ret=0 05:41:48 point_skyscan result=0 05:41:48 Check angles 05:41:48 SkyScan query 05:41:49 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.745<-16583 Statuses=0009 0009 05:41:49 Msec=0 True Az=64.245 Ze=-68.745 Az status=0009 Ze status=0009 05:41:49 Check angles 05:41:49 SkyScan query 05:41:50 SkyScan query done: ret=0 az=82.125<-5475 ze=-90.12<-18008 Statuses=0009 0009 05:41:50 Msec=750 True Az=82.125 Ze=-90.12 Az status=0009 Ze status=0009 05:41:50 Check angles 05:41:50 SkyScan query 05:41:50 SkyScan query done: ret=0 az=99.645<-6643 ze=-111.06<-19404 Statuses=0009 0009 05:41:50 Msec=1500 True Az=99.645 Ze=-111.06 Az status=0009 Ze status=0009 05:41:51 Check angles 05:41:51 SkyScan query 05:41:51 SkyScan query done: ret=0 az=117.135<-7809 ze=-132<-20800 Statuses=0009 0009 05:41:51 Msec=2250 True Az=117.135 Ze=-132 Az status=0009 Ze status=0009 05:41:51 Check angles 05:41:51 SkyScan query 05:41:52 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 05:41:52 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 05:41:52 Check angles 05:41:52 SkyScan query 05:41:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 05:41:53 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 05:41:53 Message to Master queued w/err=0: serial=132657 error=0 05:41:58 Received message from Master: op=Filter serial=132658 05:41:58 Color wheel filter change from 0 to 0 05:41:58 FLIGetFilterPos err=0 currentPosition=0 05:41:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:58 Filter is already there-color wheel unchanged 05:41:58 Received message from Master: op=Shutter serial=132659 05:41:58 Shutter LASER close 05:41:58 Received message from Camera: op=State serial=132661 05:41:58 GetSingleValue result=40 Value=cccccccc 05:41:58 SkyScan query 05:41:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:41:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:59 Parameters OK 05:41:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:59 Set A/D data flow result=40 05:41:59 Set A/D channel type result=40 05:41:59 Set A/D encoding result=40 05:41:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:59 Set channel filter=0.000000e+000 result=40 05:41:59 Config A/D Result=40 05:41:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:59 Get A/D filter: -9.255963e+061 result=40 05:41:59 Get A/D value=-858993460 result=40 05:41:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:59 Parameters OK 05:41:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:59 Set A/D data flow result=40 05:41:59 Set A/D channel type result=40 05:41:59 Set A/D encoding result=40 05:41:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:59 Set channel filter=0.000000e+000 result=40 05:41:59 Config A/D Result=40 05:41:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:59 Get A/D filter: -9.255963e+061 result=40 05:41:59 Get A/D value=-858993460 result=40 05:41:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:59 Aux= 05:41:59 Message to Camera, serial 132661 queued 05:42:35 Received message from Master: op=PointingHead serial=132674 05:42:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:42:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:42:36 Point started: ret=0 05:42:36 point_skyscan result=0 05:42:36 Check angles 05:42:36 SkyScan query 05:42:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 05:42:37 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 05:42:37 Check angles 05:42:37 SkyScan query 05:42:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:42:38 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:42:38 Message to Master queued w/err=0: serial=132674 error=0 05:42:43 Received message from Master: op=Filter serial=132675 05:42:43 Color wheel filter change from 0 to 0 05:42:43 FLIGetFilterPos err=0 currentPosition=0 05:42:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:43 Filter is already there-color wheel unchanged 05:42:43 Received message from Master: op=Shutter serial=132676 05:42:43 Shutter LASER open 05:42:43 Received message from Camera: op=State serial=132678 05:42:43 GetSingleValue result=40 Value=cccccccc 05:42:43 SkyScan query 05:42:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:42:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:44 Parameters OK 05:42:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:44 Set A/D data flow result=40 05:42:44 Set A/D channel type result=40 05:42:44 Set A/D encoding result=40 05:42:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:44 Set channel filter=0.000000e+000 result=40 05:42:44 Config A/D Result=40 05:42:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:44 Get A/D filter: -9.255963e+061 result=40 05:42:44 Get A/D value=-858993460 result=40 05:42:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:44 Parameters OK 05:42:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:44 Set A/D data flow result=40 05:42:44 Set A/D channel type result=40 05:42:44 Set A/D encoding result=40 05:42:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:44 Set channel filter=0.000000e+000 result=40 05:42:44 Config A/D Result=40 05:42:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:44 Get A/D filter: -9.255963e+061 result=40 05:42:44 Get A/D value=-858993460 result=40 05:42:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:44 Aux= 05:42:44 Message to Camera, serial 132678 queued 05:42:52 Received message from Master: op=Shutter serial=132688 05:42:52 Shutter LASER close 05:42:53 Received message from Master: op=PointingHead serial=132692 05:42:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:42:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:42:53 Point started: ret=0 05:42:53 point_skyscan result=0 05:42:54 Check angles 05:42:54 SkyScan query 05:42:54 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.28<-21552 Statuses=0009 0009 05:42:54 Msec=0 True Az=136.02 Ze=-143.28 Az status=0009 Ze status=0009 05:42:55 Check angles 05:42:55 SkyScan query 05:42:55 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.875<-20125 Statuses=0009 0009 05:42:55 Msec=750 True Az=153.885 Ze=-121.875 Az status=0009 Ze status=0009 05:42:55 Check angles 05:42:55 SkyScan query 05:42:56 SkyScan query done: ret=0 az=171.285<-11419 ze=-100.89<-18726 Statuses=0009 0009 05:42:56 Msec=1500 True Az=171.285 Ze=-100.89 Az status=0009 Ze status=0009 05:42:56 Check angles 05:42:56 SkyScan query 05:42:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.5<-17300 Statuses=0008 0009 05:42:57 Msec=2250 True Az=176.01 Ze=-79.5 Az status=0008 Ze status=0009 05:42:57 Check angles 05:42:57 SkyScan query 05:42:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.095<-15873 Statuses=0008 0009 05:42:57 Msec=3000 True Az=176.01 Ze=-58.095 Az status=0008 Ze status=0009 05:42:58 Check angles 05:42:58 SkyScan query 05:42:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:42:58 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:42:58 Message to Master queued w/err=0: serial=132692 error=0 05:43:03 Received message from Master: op=Filter serial=132693 05:43:03 Color wheel filter change from 0 to 0 05:43:03 FLIGetFilterPos err=0 currentPosition=0 05:43:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:03 Filter is already there-color wheel unchanged 05:43:03 Received message from Master: op=Shutter serial=132694 05:43:03 Shutter LASER close 05:43:04 Received message from Camera: op=State serial=132696 05:43:04 GetSingleValue result=40 Value=cccccccc 05:43:04 SkyScan query 05:43:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:43:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:04 Parameters OK 05:43:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:04 Set A/D data flow result=40 05:43:04 Set A/D channel type result=40 05:43:04 Set A/D encoding result=40 05:43:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:04 Set channel filter=0.000000e+000 result=40 05:43:04 Config A/D Result=40 05:43:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:04 Get A/D filter: -9.255963e+061 result=40 05:43:04 Get A/D value=-858993460 result=40 05:43:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:04 Parameters OK 05:43:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:04 Set A/D data flow result=40 05:43:04 Set A/D channel type result=40 05:43:04 Set A/D encoding result=40 05:43:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:04 Set channel filter=0.000000e+000 result=40 05:43:04 Config A/D Result=40 05:43:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:04 Get A/D filter: -9.255963e+061 result=40 05:43:04 Get A/D value=-858993460 result=40 05:43:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:04 Aux= 05:43:04 Message to Camera, serial 132696 queued 05:43:41 Received message from Master: op=PointingHead serial=132709 05:43:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:43:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:43:41 Point started: ret=0 05:43:41 point_skyscan result=0 05:43:42 Check angles 05:43:42 SkyScan query 05:43:43 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.66<-13444 Statuses=0009 0009 05:43:43 Msec=0 True Az=152.955 Ze=-21.66 Az status=0009 Ze status=0009 05:43:43 Check angles 05:43:43 SkyScan query 05:43:43 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.645<-12043 Statuses=0009 0009 05:43:43 Msec=750 True Az=135.36 Ze=-0.645 Az status=0009 Ze status=0009 05:43:44 Check angles 05:43:44 SkyScan query 05:43:44 SkyScan query done: ret=0 az=117.945<-7863 ze=20.28<-10648 Statuses=0009 0009 05:43:44 Msec=1500 True Az=117.945 Ze=20.28 Az status=0009 Ze status=0009 05:43:44 Check angles 05:43:44 SkyScan query 05:43:45 SkyScan query done: ret=0 az=100.47<-6698 ze=41.25<-9250 Statuses=0009 0009 05:43:45 Msec=2250 True Az=100.47 Ze=41.25 Az status=0009 Ze status=0009 05:43:45 Check angles 05:43:45 SkyScan query 05:43:46 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 05:43:46 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 05:43:46 Check angles 05:43:46 SkyScan query 05:43:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:43:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:43:46 Message to Master queued w/err=0: serial=132709 error=0 05:43:51 Received message from Master: op=Filter serial=132710 05:43:51 Color wheel filter change from 0 to 0 05:43:51 FLIGetFilterPos err=0 currentPosition=0 05:43:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:51 Filter is already there-color wheel unchanged 05:43:52 Received message from Master: op=Shutter serial=132711 05:43:52 Shutter LASER close 05:43:52 Received message from Camera: op=State serial=132713 05:43:52 GetSingleValue result=40 Value=cccccccc 05:43:52 SkyScan query 05:43:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:43:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:52 Parameters OK 05:43:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:52 Set A/D data flow result=40 05:43:52 Set A/D channel type result=40 05:43:52 Set A/D encoding result=40 05:43:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:52 Set channel filter=0.000000e+000 result=40 05:43:52 Config A/D Result=40 05:43:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:52 Get A/D filter: -9.255963e+061 result=40 05:43:52 Get A/D value=-858993460 result=40 05:43:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:52 Parameters OK 05:43:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:52 Set A/D data flow result=40 05:43:52 Set A/D channel type result=40 05:43:52 Set A/D encoding result=40 05:43:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:52 Set channel filter=0.000000e+000 result=40 05:43:52 Config A/D Result=40 05:43:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:52 Get A/D filter: -9.255963e+061 result=40 05:43:52 Get A/D value=-858993460 result=40 05:43:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:52 Aux= 05:43:52 Message to Camera, serial 132713 queued 05:44:29 Received message from Master: op=PointingHead serial=132726 05:44:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:44:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:44:29 Point started: ret=0 05:44:29 point_skyscan result=0 05:44:30 Check angles 05:44:30 SkyScan query 05:44:31 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 05:44:31 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 05:44:31 Check angles 05:44:31 SkyScan query 05:44:31 SkyScan query done: ret=0 az=126.84<-8456 ze=38.505<-9433 Statuses=0009 0008 05:44:31 Msec=750 True Az=126.84 Ze=38.505 Az status=0009 Ze status=0008 05:44:32 Check angles 05:44:32 SkyScan query 05:44:32 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 05:44:32 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 05:44:32 Check angles 05:44:32 SkyScan query 05:44:33 SkyScan query done: ret=0 az=161.805<-10787 ze=38.505<-9433 Statuses=0009 0008 05:44:33 Msec=2250 True Az=161.805 Ze=38.505 Az status=0009 Ze status=0008 05:44:33 Check angles 05:44:33 SkyScan query 05:44:34 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:44:34 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:44:34 Check angles 05:44:34 SkyScan query 05:44:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:44:34 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:44:34 Message to Master queued w/err=0: serial=132726 error=0 05:44:39 Received message from Master: op=Filter serial=132727 05:44:39 Color wheel filter change from 0 to 0 05:44:39 FLIGetFilterPos err=0 currentPosition=0 05:44:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:39 Filter is already there-color wheel unchanged 05:44:40 Received message from Master: op=Shutter serial=132728 05:44:40 Shutter LASER close 05:44:40 Received message from Camera: op=State serial=132730 05:44:40 GetSingleValue result=40 Value=cccccccc 05:44:40 SkyScan query 05:44:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:44:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:40 Parameters OK 05:44:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:40 Set A/D data flow result=40 05:44:40 Set A/D channel type result=40 05:44:40 Set A/D encoding result=40 05:44:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:40 Set channel filter=0.000000e+000 result=40 05:44:40 Config A/D Result=40 05:44:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:40 Get A/D filter: -9.255963e+061 result=40 05:44:40 Get A/D value=-858993460 result=40 05:44:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:40 Parameters OK 05:44:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:40 Set A/D data flow result=40 05:44:40 Set A/D channel type result=40 05:44:40 Set A/D encoding result=40 05:44:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:40 Set channel filter=0.000000e+000 result=40 05:44:40 Config A/D Result=40 05:44:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:40 Get A/D filter: -9.255963e+061 result=40 05:44:40 Get A/D value=-858993460 result=40 05:44:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:40 Aux= 05:44:40 Message to Camera, serial 132730 queued 05:45:17 Received message from Master: op=PointingHead serial=132743 05:45:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:45:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:45:17 Point started: ret=0 05:45:17 point_skyscan result=0 05:45:18 Check angles 05:45:18 SkyScan query 05:45:19 SkyScan query done: ret=0 az=152.895<-10193 ze=8.64<-11424 Statuses=0009 0009 05:45:19 Msec=0 True Az=152.895 Ze=8.64 Az status=0009 Ze status=0009 05:45:19 Check angles 05:45:19 SkyScan query 05:45:19 SkyScan query done: ret=0 az=135.495<-9033 ze=-12.33<-12822 Statuses=0009 0009 05:45:19 Msec=750 True Az=135.495 Ze=-12.33 Az status=0009 Ze status=0009 05:45:20 Check angles 05:45:20 SkyScan query 05:45:20 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.27<-14218 Statuses=0009 0009 05:45:20 Msec=1500 True Az=117.93 Ze=-33.27 Az status=0009 Ze status=0009 05:45:20 Check angles 05:45:20 SkyScan query 05:45:21 SkyScan query done: ret=0 az=100.575<-6705 ze=-51.54<-15436 Statuses=0009 0009 05:45:21 Msec=2250 True Az=100.575 Ze=-51.54 Az status=0009 Ze status=0009 05:45:21 Check angles 05:45:21 SkyScan query 05:45:22 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 05:45:22 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 05:45:22 Check angles 05:45:22 SkyScan query 05:45:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:45:22 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:45:22 Message to Master queued w/err=0: serial=132743 error=0 05:45:27 Received message from Master: op=Identify serial=132744 05:45:27 Received message from Master: op=Filter serial=132747 05:45:27 Color wheel filter change from 0 to 0 05:45:27 FLIGetFilterPos err=0 currentPosition=0 05:45:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:27 Filter is already there-color wheel unchanged 05:45:28 Received message from Master: op=Shutter serial=132748 05:45:28 Shutter LASER close 05:45:28 Received message from Camera: op=State serial=132750 05:45:28 GetSingleValue result=40 Value=cccccccc 05:45:28 SkyScan query 05:45:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:45:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:28 Parameters OK 05:45:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:28 Set A/D data flow result=40 05:45:28 Set A/D channel type result=40 05:45:28 Set A/D encoding result=40 05:45:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:28 Set channel filter=0.000000e+000 result=40 05:45:28 Config A/D Result=40 05:45:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:28 Get A/D filter: -9.255963e+061 result=40 05:45:28 Get A/D value=-858993460 result=40 05:45:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:28 Parameters OK 05:45:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:28 Set A/D data flow result=40 05:45:28 Set A/D channel type result=40 05:45:28 Set A/D encoding result=40 05:45:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:28 Set channel filter=0.000000e+000 result=40 05:45:28 Config A/D Result=40 05:45:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:28 Get A/D filter: -9.255963e+061 result=40 05:45:28 Get A/D value=-858993460 result=40 05:45:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:28 Aux= 05:45:28 Message to Camera, serial 132750 queued 05:46:05 Received message from Master: op=PointingHead serial=132763 05:46:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:46:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:46:06 Point started: ret=0 05:46:06 point_skyscan result=0 05:46:06 Check angles 05:46:06 SkyScan query 05:46:07 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.45<-17430 Statuses=0009 0009 05:46:07 Msec=0 True Az=109.14 Ze=-81.45 Az status=0009 Ze status=0009 05:46:07 Check angles 05:46:07 SkyScan query 05:46:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 05:46:08 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 05:46:08 Check angles 05:46:08 SkyScan query 05:46:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 05:46:08 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 [UTC 2018-12-14 05:46:09] 05:46:09 Check angles 05:46:09 SkyScan query 05:46:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-146.07<-21738 Statuses=0008 0009 05:46:09 Msec=2250 True Az=112.995 Ze=-146.07 Az status=0008 Ze status=0009 05:46:09 Check angles 05:46:09 SkyScan query 05:46:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 05:46:10 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 05:46:10 Check angles 05:46:10 SkyScan query 05:46:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:46:11 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:46:11 Message to Master queued w/err=0: serial=132763 error=0 05:46:16 Received message from Master: op=Filter serial=132764 05:46:16 Color wheel filter change from 0 to 0 05:46:16 FLIGetFilterPos err=0 currentPosition=0 05:46:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:16 Filter is already there-color wheel unchanged 05:46:16 Received message from Master: op=Shutter serial=132765 05:46:16 Shutter LASER open 05:46:16 Received message from Camera: op=State serial=132767 05:46:16 GetSingleValue result=40 Value=cccccccc 05:46:16 SkyScan query 05:46:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:46:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:17 Parameters OK 05:46:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:17 Set A/D data flow result=40 05:46:17 Set A/D channel type result=40 05:46:17 Set A/D encoding result=40 05:46:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:17 Set channel filter=0.000000e+000 result=40 05:46:17 Config A/D Result=40 05:46:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:17 Get A/D filter: -9.255963e+061 result=40 05:46:17 Get A/D value=-858993460 result=40 05:46:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:17 Parameters OK 05:46:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:17 Set A/D data flow result=40 05:46:17 Set A/D channel type result=40 05:46:17 Set A/D encoding result=40 05:46:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:17 Set channel filter=0.000000e+000 result=40 05:46:17 Config A/D Result=40 05:46:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:17 Get A/D filter: -9.255963e+061 result=40 05:46:17 Get A/D value=-858993460 result=40 05:46:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:17 Aux= 05:46:17 Message to Camera, serial 132767 queued 05:46:25 Received message from Master: op=Shutter serial=132777 05:46:25 Shutter LASER close 05:46:25 Received message from Master: op=PointingHead serial=132781 05:46:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:46:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:46:26 Point started: ret=0 05:46:26 point_skyscan result=0 05:46:27 Check angles 05:46:27 SkyScan query 05:46:27 SkyScan query done: ret=0 az=89.85<-5990 ze=157.155<-1523 Statuses=0009 0009 05:46:27 Msec=0 True Az=89.85 Ze=157.155 Az status=0009 Ze status=0009 05:46:27 Check angles 05:46:27 SkyScan query 05:46:28 SkyScan query done: ret=0 az=72<-4800 ze=135.78<-2948 Statuses=0009 0009 05:46:28 Msec=750 True Az=72 Ze=135.78 Az status=0009 Ze status=0009 05:46:28 Check angles 05:46:28 SkyScan query 05:46:29 SkyScan query done: ret=0 az=54.57<-3638 ze=114.795<-4347 Statuses=0009 0009 05:46:29 Msec=1500 True Az=54.57 Ze=114.795 Az status=0009 Ze status=0009 05:46:29 Check angles 05:46:29 SkyScan query 05:46:29 SkyScan query done: ret=0 az=40.995<-2733 ze=93.87<-5742 Statuses=0009 0009 05:46:29 Msec=2250 True Az=40.995 Ze=93.87 Az status=0009 Ze status=0009 05:46:30 Check angles 05:46:30 SkyScan query 05:46:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 05:46:30 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 05:46:30 Check angles 05:46:30 SkyScan query 05:46:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 05:46:31 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 05:46:31 Check angles 05:46:31 SkyScan query 05:46:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:46:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:46:32 Message to Master queued w/err=0: serial=132781 error=0 05:46:37 Received message from Master: op=Filter serial=132782 05:46:37 Color wheel filter change from 0 to 0 05:46:37 FLIGetFilterPos err=0 currentPosition=0 05:46:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:37 Filter is already there-color wheel unchanged 05:46:37 Received message from Master: op=Shutter serial=132783 05:46:37 Shutter LASER close 05:46:37 Received message from Camera: op=State serial=132785 05:46:37 GetSingleValue result=40 Value=cccccccc 05:46:37 SkyScan query 05:46:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:46:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:38 Parameters OK 05:46:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:38 Set A/D data flow result=40 05:46:38 Set A/D channel type result=40 05:46:38 Set A/D encoding result=40 05:46:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:38 Set channel filter=0.000000e+000 result=40 05:46:38 Config A/D Result=40 05:46:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:38 Get A/D filter: -9.255963e+061 result=40 05:46:38 Get A/D value=-858993460 result=40 05:46:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:38 Parameters OK 05:46:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:38 Set A/D data flow result=40 05:46:38 Set A/D channel type result=40 05:46:38 Set A/D encoding result=40 05:46:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:38 Set channel filter=0.000000e+000 result=40 05:46:38 Config A/D Result=40 05:46:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:38 Get A/D filter: -9.255963e+061 result=40 05:46:38 Get A/D value=-858993460 result=40 05:46:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:38 Aux= 05:46:38 Message to Camera, serial 132785 queued 05:47:14 Received message from Master: op=PointingHead serial=132798 05:47:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:47:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:47:15 Point started: ret=0 05:47:15 point_skyscan result=0 05:47:15 Check angles 05:47:15 SkyScan query 05:47:16 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 05:47:16 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 05:47:16 Check angles 05:47:16 SkyScan query 05:47:17 SkyScan query done: ret=0 az=81.54<-5436 ze=66.495<-7567 Statuses=0009 0008 05:47:17 Msec=750 True Az=81.54 Ze=66.495 Az status=0009 Ze status=0008 05:47:17 Check angles 05:47:17 SkyScan query 05:47:18 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 05:47:18 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 05:47:18 Check angles 05:47:18 SkyScan query 05:47:18 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 05:47:18 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 05:47:18 Check angles 05:47:18 SkyScan query 05:47:19 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 05:47:19 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 05:47:19 Check angles 05:47:19 SkyScan query 05:47:20 SkyScan query done: ret=0 az=152.49<-10166 ze=66.495<-7567 Statuses=0009 0008 05:47:20 Msec=3750 True Az=152.49 Ze=66.495 Az status=0009 Ze status=0008 05:47:20 Check angles 05:47:20 SkyScan query 05:47:21 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:47:21 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:47:21 Message to Master queued w/err=0: serial=132798 error=0 05:47:26 Received message from Master: op=Filter serial=132799 05:47:26 Color wheel filter change from 0 to 0 05:47:26 FLIGetFilterPos err=0 currentPosition=0 05:47:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:26 Filter is already there-color wheel unchanged 05:47:26 Received message from Master: op=Shutter serial=132800 05:47:26 Shutter LASER close 05:47:26 Received message from Camera: op=State serial=132802 05:47:26 GetSingleValue result=40 Value=cccccccc 05:47:26 SkyScan query 05:47:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:47:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:26 Parameters OK 05:47:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:26 Set A/D data flow result=40 05:47:26 Set A/D channel type result=40 05:47:26 Set A/D encoding result=40 05:47:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:26 Set channel filter=0.000000e+000 result=40 05:47:26 Config A/D Result=40 05:47:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:26 Get A/D filter: -9.255963e+061 result=40 05:47:26 Get A/D value=-858993460 result=40 05:47:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:26 Parameters OK 05:47:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:26 Set A/D data flow result=40 05:47:26 Set A/D channel type result=40 05:47:26 Set A/D encoding result=40 05:47:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:26 Set channel filter=0.000000e+000 result=40 05:47:26 Config A/D Result=40 05:47:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:26 Get A/D filter: -9.255963e+061 result=40 05:47:26 Get A/D value=-858993460 result=40 05:47:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:26 Aux= 05:47:26 Message to Camera, serial 132802 queued 05:48:03 Received message from Master: op=PointingHead serial=132815 05:48:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:48:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:48:04 Point started: ret=0 05:48:04 point_skyscan result=0 05:48:04 Check angles 05:48:04 SkyScan query 05:48:05 SkyScan query done: ret=0 az=134.58<-8972 ze=36.36<-9576 Statuses=0009 0009 05:48:05 Msec=0 True Az=134.58 Ze=36.36 Az status=0009 Ze status=0009 05:48:05 Check angles 05:48:05 SkyScan query 05:48:06 SkyScan query done: ret=0 az=117.105<-7807 ze=15.435<-10971 Statuses=0009 0009 05:48:06 Msec=750 True Az=117.105 Ze=15.435 Az status=0009 Ze status=0009 05:48:06 Check angles 05:48:06 SkyScan query 05:48:06 SkyScan query done: ret=0 az=99.81<-6654 ze=-5.55<-12370 Statuses=0009 0009 05:48:06 Msec=1500 True Az=99.81 Ze=-5.55 Az status=0009 Ze status=0009 05:48:07 Check angles 05:48:07 SkyScan query 05:48:07 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.535<-13769 Statuses=0009 0009 05:48:07 Msec=2250 True Az=82.26 Ze=-26.535 Az status=0009 Ze status=0009 05:48:07 Check angles 05:48:07 SkyScan query 05:48:08 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.58<-14572 Statuses=0009 0008 05:48:08 Msec=3000 True Az=64.68 Ze=-38.58 Az status=0009 Ze status=0008 05:48:08 Check angles 05:48:08 SkyScan query 05:48:09 SkyScan query done: ret=0 az=47.28<-3152 ze=-38.52<-14568 Statuses=0009 0008 05:48:09 Msec=3750 True Az=47.28 Ze=-38.52 Az status=0009 Ze status=0008 05:48:09 Check angles 05:48:09 SkyScan query 05:48:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:48:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:48:09 Message to Master queued w/err=0: serial=132815 error=0 05:48:14 Received message from Master: op=Filter serial=132816 05:48:14 Color wheel filter change from 0 to 0 05:48:14 FLIGetFilterPos err=0 currentPosition=0 05:48:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:14 Filter is already there-color wheel unchanged 05:48:15 Received message from Master: op=Shutter serial=132817 05:48:15 Shutter LASER close 05:48:15 Received message from Camera: op=State serial=132819 05:48:15 GetSingleValue result=40 Value=cccccccc 05:48:15 SkyScan query 05:48:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:48:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:15 Parameters OK 05:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:15 Set A/D data flow result=40 05:48:15 Set A/D channel type result=40 05:48:15 Set A/D encoding result=40 05:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:15 Set channel filter=0.000000e+000 result=40 05:48:15 Config A/D Result=40 05:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:15 Get A/D filter: -9.255963e+061 result=40 05:48:15 Get A/D value=-858993460 result=40 05:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:15 Parameters OK 05:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:15 Set A/D data flow result=40 05:48:15 Set A/D channel type result=40 05:48:15 Set A/D encoding result=40 05:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:15 Set channel filter=0.000000e+000 result=40 05:48:15 Config A/D Result=40 05:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:15 Get A/D filter: -9.255963e+061 result=40 05:48:15 Get A/D value=-858993460 result=40 05:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:15 Aux= 05:48:15 Message to Camera, serial 132819 queued 05:48:52 Received message from Master: op=PointingHead serial=132832 05:48:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:48:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:48:52 Point started: ret=0 05:48:52 point_skyscan result=0 05:48:53 Check angles 05:48:53 SkyScan query 05:48:54 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.655<-16577 Statuses=0009 0009 05:48:54 Msec=0 True Az=64.245 Ze=-68.655 Az status=0009 Ze status=0009 05:48:54 Check angles 05:48:54 SkyScan query 05:48:54 SkyScan query done: ret=0 az=82.065<-5471 ze=-90.03<-18002 Statuses=0009 0009 05:48:54 Msec=750 True Az=82.065 Ze=-90.03 Az status=0009 Ze status=0009 05:48:55 Check angles 05:48:55 SkyScan query 05:48:55 SkyScan query done: ret=0 az=99.585<-6639 ze=-111<-19400 Statuses=0009 0009 05:48:55 Msec=1500 True Az=99.585 Ze=-111 Az status=0009 Ze status=0009 05:48:55 Check angles 05:48:55 SkyScan query 05:48:56 SkyScan query done: ret=0 az=117.075<-7805 ze=-131.91<-20794 Statuses=0009 0009 05:48:56 Msec=2250 True Az=117.075 Ze=-131.91 Az status=0009 Ze status=0009 05:48:56 Check angles 05:48:56 SkyScan query 05:48:57 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 05:48:57 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 05:48:57 Check angles 05:48:57 SkyScan query 05:48:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 05:48:57 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 05:48:57 Message to Master queued w/err=0: serial=132832 error=0 05:49:02 Received message from Master: op=Filter serial=132833 05:49:02 Color wheel filter change from 0 to 0 05:49:02 FLIGetFilterPos err=0 currentPosition=0 05:49:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:02 Filter is already there-color wheel unchanged 05:49:03 Received message from Master: op=Shutter serial=132834 05:49:03 Shutter LASER close 05:49:03 Received message from Camera: op=State serial=132836 05:49:03 GetSingleValue result=40 Value=cccccccc 05:49:03 SkyScan query 05:49:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:49:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:03 Parameters OK 05:49:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:03 Set A/D data flow result=40 05:49:03 Set A/D channel type result=40 05:49:03 Set A/D encoding result=40 05:49:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:03 Set channel filter=0.000000e+000 result=40 05:49:03 Config A/D Result=40 05:49:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:03 Get A/D filter: -9.255963e+061 result=40 05:49:03 Get A/D value=-858993460 result=40 05:49:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:03 Parameters OK 05:49:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:03 Set A/D data flow result=40 05:49:03 Set A/D channel type result=40 05:49:03 Set A/D encoding result=40 05:49:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:03 Set channel filter=0.000000e+000 result=40 05:49:03 Config A/D Result=40 05:49:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:03 Get A/D filter: -9.255963e+061 result=40 05:49:03 Get A/D value=-858993460 result=40 05:49:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:03 Aux= 05:49:03 Message to Camera, serial 132836 queued 05:49:40 Received message from Master: op=PointingHead serial=132849 05:49:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:49:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:49:40 Point started: ret=0 05:49:40 point_skyscan result=0 05:49:41 Check angles 05:49:41 SkyScan query 05:49:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 05:49:42 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 05:49:42 Check angles 05:49:42 SkyScan query 05:49:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:49:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:49:43 Message to Master queued w/err=0: serial=132849 error=0 05:49:48 Received message from Master: op=Filter serial=132850 05:49:48 Color wheel filter change from 0 to 0 05:49:48 FLIGetFilterPos err=0 currentPosition=0 05:49:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:48 Filter is already there-color wheel unchanged 05:49:48 Received message from Master: op=Shutter serial=132851 05:49:48 Shutter LASER open 05:49:48 Received message from Camera: op=State serial=132853 05:49:48 GetSingleValue result=40 Value=cccccccc 05:49:48 SkyScan query 05:49:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:49:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:48 Parameters OK 05:49:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:48 Set A/D data flow result=40 05:49:48 Set A/D channel type result=40 05:49:48 Set A/D encoding result=40 05:49:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:48 Set channel filter=0.000000e+000 result=40 05:49:48 Config A/D Result=40 05:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:48 Get A/D filter: -9.255963e+061 result=40 05:49:48 Get A/D value=-858993460 result=40 05:49:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:48 Parameters OK 05:49:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:48 Set A/D data flow result=40 05:49:48 Set A/D channel type result=40 05:49:48 Set A/D encoding result=40 05:49:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:48 Set channel filter=0.000000e+000 result=40 05:49:48 Config A/D Result=40 05:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:48 Get A/D filter: -9.255963e+061 result=40 05:49:48 Get A/D value=-858993460 result=40 05:49:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:48 Aux= 05:49:48 Message to Camera, serial 132853 queued 05:49:57 Received message from Master: op=Shutter serial=132863 05:49:57 Shutter LASER close 05:49:57 Received message from Master: op=PointingHead serial=132867 05:49:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:49:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:49:58 Point started: ret=0 05:49:58 point_skyscan result=0 05:49:59 Check angles 05:49:59 SkyScan query 05:49:59 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.995<-21533 Statuses=0009 0009 05:49:59 Msec=0 True Az=136.395 Ze=-142.995 Az status=0009 Ze status=0009 05:49:59 Check angles 05:49:59 SkyScan query 05:50:00 SkyScan query done: ret=0 az=153.84<-10256 ze=-122.055<-20137 Statuses=0009 0009 05:50:00 Msec=750 True Az=153.84 Ze=-122.055 Az status=0009 Ze status=0009 05:50:00 Check angles 05:50:00 SkyScan query 05:50:01 SkyScan query done: ret=0 az=171.345<-11423 ze=-101.1<-18740 Statuses=0009 0009 05:50:01 Msec=1500 True Az=171.345 Ze=-101.1 Az status=0009 Ze status=0009 05:50:01 Check angles 05:50:01 SkyScan query 05:50:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.19<-17346 Statuses=0008 0009 05:50:01 Msec=2250 True Az=176.01 Ze=-80.19 Az status=0008 Ze status=0009 05:50:02 Check angles 05:50:02 SkyScan query 05:50:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.205<-15947 Statuses=0008 0009 05:50:02 Msec=3000 True Az=176.01 Ze=-59.205 Az status=0008 Ze status=0009 05:50:02 Check angles 05:50:02 SkyScan query 05:50:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:50:03 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:50:03 Message to Master queued w/err=0: serial=132867 error=0 05:50:08 Received message from Master: op=Filter serial=132868 05:50:08 Color wheel filter change from 0 to 0 05:50:08 FLIGetFilterPos err=0 currentPosition=0 05:50:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:08 Filter is already there-color wheel unchanged 05:50:08 Received message from Master: op=Shutter serial=132869 05:50:08 Shutter LASER close 05:50:08 Received message from Camera: op=State serial=132871 05:50:08 GetSingleValue result=40 Value=cccccccc 05:50:08 SkyScan query 05:50:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:50:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:09 Parameters OK 05:50:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:09 Set A/D data flow result=40 05:50:09 Set A/D channel type result=40 05:50:09 Set A/D encoding result=40 05:50:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:09 Set channel filter=0.000000e+000 result=40 05:50:09 Config A/D Result=40 05:50:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:09 Get A/D filter: -9.255963e+061 result=40 05:50:09 Get A/D value=-858993460 result=40 05:50:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:09 Parameters OK 05:50:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:09 Set A/D data flow result=40 05:50:09 Set A/D channel type result=40 05:50:09 Set A/D encoding result=40 05:50:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:09 Set channel filter=0.000000e+000 result=40 05:50:09 Config A/D Result=40 05:50:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:09 Get A/D filter: -9.255963e+061 result=40 05:50:09 Get A/D value=-858993460 result=40 05:50:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:09 Aux= 05:50:09 Message to Camera, serial 132871 queued 05:50:45 Received message from Master: op=PointingHead serial=132883 05:50:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:50:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:50:45 Point started: ret=0 05:50:45 point_skyscan result=0 05:50:46 Check angles 05:50:46 SkyScan query 05:50:46 SkyScan query done: ret=0 az=152.865<-10191 ze=-21.555<-13437 Statuses=0009 0009 05:50:46 Msec=0 True Az=152.865 Ze=-21.555 Az status=0009 Ze status=0009 05:50:47 Check angles 05:50:47 SkyScan query 05:50:47 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.57<-12038 Statuses=0009 0009 05:50:47 Msec=750 True Az=135.36 Ze=-0.57 Az status=0009 Ze status=0009 05:50:47 Check angles 05:50:47 SkyScan query 05:50:48 SkyScan query done: ret=0 az=117.81<-7854 ze=20.37<-10642 Statuses=0009 0009 05:50:48 Msec=1500 True Az=117.81 Ze=20.37 Az status=0009 Ze status=0009 05:50:48 Check angles 05:50:48 SkyScan query 05:50:49 SkyScan query done: ret=0 az=100.455<-6697 ze=41.355<-9243 Statuses=0009 0009 05:50:49 Msec=2250 True Az=100.455 Ze=41.355 Az status=0009 Ze status=0009 05:50:49 Check angles 05:50:49 SkyScan query 05:50:49 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 05:50:49 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 05:50:50 Check angles 05:50:50 SkyScan query 05:50:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:50:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:50:50 Message to Master queued w/err=0: serial=132883 error=0 05:50:55 Received message from Master: op=Filter serial=132884 05:50:55 Color wheel filter change from 0 to 0 05:50:55 FLIGetFilterPos err=0 currentPosition=0 05:50:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:55 Filter is already there-color wheel unchanged 05:50:55 Received message from Master: op=Shutter serial=132885 05:50:55 Shutter LASER close 05:50:55 Received message from Camera: op=State serial=132887 05:50:55 GetSingleValue result=40 Value=cccccccc 05:50:55 SkyScan query 05:50:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:50:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:56 Parameters OK 05:50:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:56 Set A/D data flow result=40 05:50:56 Set A/D channel type result=40 05:50:56 Set A/D encoding result=40 05:50:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:56 Set channel filter=0.000000e+000 result=40 05:50:56 Config A/D Result=40 05:50:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:56 Get A/D filter: -9.255963e+061 result=40 05:50:56 Get A/D value=-858993460 result=40 05:50:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:56 Parameters OK 05:50:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:56 Set A/D data flow result=40 05:50:56 Set A/D channel type result=40 05:50:56 Set A/D encoding result=40 05:50:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:56 Set channel filter=0.000000e+000 result=40 05:50:56 Config A/D Result=40 05:50:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:56 Get A/D filter: -9.255963e+061 result=40 05:50:56 Get A/D value=-858993460 result=40 05:50:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:56 Aux= 05:50:56 Message to Camera, serial 132887 queued 05:51:33 Received message from Master: op=PointingHead serial=132900 05:51:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:51:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:51:33 Point started: ret=0 05:51:33 point_skyscan result=0 05:51:34 Check angles 05:51:34 SkyScan query 05:51:34 SkyScan query done: ret=0 az=108.72<-7248 ze=38.49<-9434 Statuses=0009 0008 05:51:34 Msec=0 True Az=108.72 Ze=38.49 Az status=0009 Ze status=0008 05:51:35 Check angles 05:51:35 SkyScan query 05:51:35 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 05:51:35 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 05:51:35 Check angles 05:51:35 SkyScan query 05:51:36 SkyScan query done: ret=0 az=143.805<-9587 ze=38.505<-9433 Statuses=0009 0008 05:51:36 Msec=1500 True Az=143.805 Ze=38.505 Az status=0009 Ze status=0008 05:51:36 Check angles 05:51:36 SkyScan query 05:51:37 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 05:51:37 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 05:51:37 Check angles 05:51:37 SkyScan query 05:51:38 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:51:38 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:51:38 Check angles 05:51:38 SkyScan query 05:51:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:51:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:51:38 Message to Master queued w/err=0: serial=132900 error=0 05:51:43 Received message from Master: op=Filter serial=132901 05:51:43 Color wheel filter change from 0 to 0 05:51:43 FLIGetFilterPos err=0 currentPosition=0 05:51:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:43 Filter is already there-color wheel unchanged 05:51:43 Received message from Master: op=Shutter serial=132902 05:51:43 Shutter LASER close 05:51:43 Received message from Camera: op=State serial=132904 05:51:43 GetSingleValue result=40 Value=cccccccc 05:51:43 SkyScan query 05:51:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:51:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:44 Parameters OK 05:51:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:44 Set A/D data flow result=40 05:51:44 Set A/D channel type result=40 05:51:44 Set A/D encoding result=40 05:51:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:44 Set channel filter=0.000000e+000 result=40 05:51:44 Config A/D Result=40 05:51:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:44 Get A/D filter: -9.255963e+061 result=40 05:51:44 Get A/D value=-858993460 result=40 05:51:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:44 Parameters OK 05:51:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:44 Set A/D data flow result=40 05:51:44 Set A/D channel type result=40 05:51:44 Set A/D encoding result=40 05:51:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:44 Set channel filter=0.000000e+000 result=40 05:51:44 Config A/D Result=40 05:51:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:44 Get A/D filter: -9.255963e+061 result=40 05:51:44 Get A/D value=-858993460 result=40 05:51:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:44 Aux= 05:51:44 Message to Camera, serial 132904 queued 05:52:21 Received message from Master: op=PointingHead serial=132917 05:52:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:52:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:52:21 Point started: ret=0 05:52:21 point_skyscan result=0 05:52:22 Check angles 05:52:22 SkyScan query 05:52:23 SkyScan query done: ret=0 az=153.18<-10212 ze=8.985<-11401 Statuses=0009 0009 05:52:23 Msec=0 True Az=153.18 Ze=8.985 Az status=0009 Ze status=0009 05:52:23 Check angles 05:52:23 SkyScan query 05:52:23 SkyScan query done: ret=0 az=135.81<-9054 ze=-12<-12800 Statuses=0009 0009 05:52:23 Msec=750 True Az=135.81 Ze=-12 Az status=0009 Ze status=0009 05:52:23 Check angles 05:52:23 SkyScan query 05:52:24 SkyScan query done: ret=0 az=118.245<-7883 ze=-32.91<-14194 Statuses=0009 0009 05:52:24 Msec=1500 True Az=118.245 Ze=-32.91 Az status=0009 Ze status=0009 05:52:24 Check angles 05:52:24 SkyScan query 05:52:25 SkyScan query done: ret=0 az=100.815<-6721 ze=-51.495<-15433 Statuses=0009 0009 05:52:25 Msec=2250 True Az=100.815 Ze=-51.495 Az status=0009 Ze status=0009 05:52:25 Check angles 05:52:25 SkyScan query 05:52:26 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:52:26 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:52:26 Check angles 05:52:26 SkyScan query 05:52:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:52:26 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:52:26 Message to Master queued w/err=0: serial=132917 error=0 05:52:31 Received message from Master: op=Filter serial=132918 05:52:31 Color wheel filter change from 0 to 0 05:52:31 FLIGetFilterPos err=0 currentPosition=0 05:52:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:31 Filter is already there-color wheel unchanged 05:52:31 Received message from Master: op=Shutter serial=132919 05:52:31 Shutter LASER close 05:52:32 Received message from Camera: op=State serial=132921 05:52:32 GetSingleValue result=40 Value=cccccccc 05:52:32 SkyScan query 05:52:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:52:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:32 Parameters OK 05:52:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:32 Set A/D data flow result=40 05:52:32 Set A/D channel type result=40 05:52:32 Set A/D encoding result=40 05:52:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:32 Set channel filter=0.000000e+000 result=40 05:52:32 Config A/D Result=40 05:52:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:32 Get A/D filter: -9.255963e+061 result=40 05:52:32 Get A/D value=-858993460 result=40 05:52:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:32 Parameters OK 05:52:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:32 Set A/D data flow result=40 05:52:32 Set A/D channel type result=40 05:52:32 Set A/D encoding result=40 05:52:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:32 Set channel filter=0.000000e+000 result=40 05:52:32 Config A/D Result=40 05:52:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:32 Get A/D filter: -9.255963e+061 result=40 05:52:32 Get A/D value=-858993460 result=40 05:52:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:32 Aux= 05:52:32 Message to Camera, serial 132921 queued 05:53:09 Received message from Master: op=PointingHead serial=132934 05:53:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:53:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:53:09 Point started: ret=0 05:53:09 point_skyscan result=0 05:53:10 Check angles 05:53:10 SkyScan query 05:53:11 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.39<-17426 Statuses=0009 0009 05:53:11 Msec=0 True Az=109.14 Ze=-81.39 Az status=0009 Ze status=0009 05:53:11 Check angles 05:53:11 SkyScan query 05:53:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 05:53:11 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 05:53:12 Check angles 05:53:12 SkyScan query 05:53:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.3<-20220 Statuses=0008 0009 05:53:12 Msec=1500 True Az=112.995 Ze=-123.3 Az status=0008 Ze status=0009 05:53:12 Check angles 05:53:12 SkyScan query 05:53:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.24<-21616 Statuses=0008 0009 05:53:13 Msec=2250 True Az=112.995 Ze=-144.24 Az status=0008 Ze status=0009 05:53:13 Check angles 05:53:13 SkyScan query 05:53:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.21<-23014 Statuses=0008 0009 05:53:14 Msec=3000 True Az=112.995 Ze=-165.21 Az status=0008 Ze status=0009 05:53:14 Check angles 05:53:14 SkyScan query 05:53:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:53:14 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:53:14 Message to Master queued w/err=0: serial=132934 error=0 05:53:19 Received message from Master: op=Filter serial=132935 05:53:19 Color wheel filter change from 0 to 0 05:53:19 FLIGetFilterPos err=0 currentPosition=0 05:53:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:19 Filter is already there-color wheel unchanged 05:53:20 Received message from Master: op=Shutter serial=132936 05:53:20 Shutter LASER open 05:53:20 Received message from Camera: op=State serial=132938 05:53:20 GetSingleValue result=40 Value=cccccccc 05:53:20 SkyScan query 05:53:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:53:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:20 Parameters OK 05:53:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:20 Set A/D data flow result=40 05:53:20 Set A/D channel type result=40 05:53:20 Set A/D encoding result=40 05:53:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:20 Set channel filter=0.000000e+000 result=40 05:53:20 Config A/D Result=40 05:53:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:20 Get A/D filter: -9.255963e+061 result=40 05:53:20 Get A/D value=-858993460 result=40 05:53:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:20 Parameters OK 05:53:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:20 Set A/D data flow result=40 05:53:20 Set A/D channel type result=40 05:53:20 Set A/D encoding result=40 05:53:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:20 Set channel filter=0.000000e+000 result=40 05:53:20 Config A/D Result=40 05:53:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:20 Get A/D filter: -9.255963e+061 result=40 05:53:20 Get A/D value=-858993460 result=40 05:53:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:20 Aux= 05:53:20 Message to Camera, serial 132938 queued 05:53:29 Received message from Master: op=Shutter serial=132948 05:53:29 Shutter LASER close 05:53:29 Received message from Master: op=PointingHead serial=132952 05:53:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:53:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:53:30 Point started: ret=0 05:53:30 point_skyscan result=0 05:53:30 Check angles 05:53:30 SkyScan query 05:53:31 SkyScan query done: ret=0 az=89.85<-5990 ze=157.215<-1519 Statuses=0009 0009 05:53:31 Msec=0 True Az=89.85 Ze=157.215 Az status=0009 Ze status=0009 05:53:31 Check angles 05:53:31 SkyScan query 05:53:32 SkyScan query done: ret=0 az=72.045<-4803 ze=135.84<-2944 Statuses=0009 0009 05:53:32 Msec=750 True Az=72.045 Ze=135.84 Az status=0009 Ze status=0009 05:53:32 Check angles 05:53:32 SkyScan query 05:53:32 SkyScan query done: ret=0 az=54.3<-3620 ze=114.42<-4372 Statuses=0009 0009 05:53:32 Msec=1500 True Az=54.3 Ze=114.42 Az status=0009 Ze status=0009 05:53:33 Check angles 05:53:33 SkyScan query 05:53:33 SkyScan query done: ret=0 az=40.98<-2732 ze=93.495<-5767 Statuses=0009 0009 05:53:33 Msec=2250 True Az=40.98 Ze=93.495 Az status=0009 Ze status=0009 05:53:33 Check angles 05:53:33 SkyScan query 05:53:34 SkyScan query done: ret=0 az=40.995<-2733 ze=72.525<-7165 Statuses=0008 0009 05:53:34 Msec=3000 True Az=40.995 Ze=72.525 Az status=0008 Ze status=0009 05:53:34 Check angles 05:53:34 SkyScan query 05:53:35 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 05:53:35 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 05:53:35 Check angles 05:53:35 SkyScan query 05:53:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:53:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:53:35 Message to Master queued w/err=0: serial=132952 error=0 05:53:40 Received message from Master: op=Filter serial=132953 05:53:40 Color wheel filter change from 0 to 0 05:53:40 FLIGetFilterPos err=0 currentPosition=0 05:53:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:40 Filter is already there-color wheel unchanged 05:53:41 Received message from Master: op=Shutter serial=132954 05:53:41 Shutter LASER close 05:53:41 Received message from Camera: op=State serial=132956 05:53:41 GetSingleValue result=40 Value=cccccccc 05:53:41 SkyScan query 05:53:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:53:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:41 Parameters OK 05:53:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:41 Set A/D data flow result=40 05:53:41 Set A/D channel type result=40 05:53:41 Set A/D encoding result=40 05:53:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:41 Set channel filter=0.000000e+000 result=40 05:53:41 Config A/D Result=40 05:53:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:41 Get A/D filter: -9.255963e+061 result=40 05:53:41 Get A/D value=-858993460 result=40 05:53:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:41 Parameters OK 05:53:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:41 Set A/D data flow result=40 05:53:41 Set A/D channel type result=40 05:53:41 Set A/D encoding result=40 05:53:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:41 Set channel filter=0.000000e+000 result=40 05:53:41 Config A/D Result=40 05:53:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:41 Get A/D filter: -9.255963e+061 result=40 05:53:41 Get A/D value=-858993460 result=40 05:53:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:41 Aux= 05:53:41 Message to Camera, serial 132956 queued 05:54:18 Received message from Master: op=PointingHead serial=132969 05:54:18 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:54:18 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:54:18 Point started: ret=0 05:54:18 point_skyscan result=0 05:54:19 Check angles 05:54:19 SkyScan query 05:54:20 SkyScan query done: ret=0 az=64.425<-4295 ze=66.54<-7564 Statuses=0009 0008 05:54:20 Msec=0 True Az=64.425 Ze=66.54 Az status=0009 Ze status=0008 05:54:20 Check angles 05:54:20 SkyScan query 05:54:21 SkyScan query done: ret=0 az=82.335<-5489 ze=66.51<-7566 Statuses=0009 0008 05:54:21 Msec=750 True Az=82.335 Ze=66.51 Az status=0009 Ze status=0008 05:54:21 Check angles 05:54:21 SkyScan query 05:54:21 SkyScan query done: ret=0 az=100.17<-6678 ze=66.495<-7567 Statuses=0009 0008 05:54:21 Msec=1500 True Az=100.17 Ze=66.495 Az status=0009 Ze status=0008 05:54:22 Check angles 05:54:22 SkyScan query 05:54:22 SkyScan query done: ret=0 az=117.555<-7837 ze=66.495<-7567 Statuses=0009 0008 05:54:22 Msec=2250 True Az=117.555 Ze=66.495 Az status=0009 Ze status=0008 05:54:22 Check angles 05:54:22 SkyScan query 05:54:23 SkyScan query done: ret=0 az=135.045<-9003 ze=66.495<-7567 Statuses=0009 0008 05:54:23 Msec=3000 True Az=135.045 Ze=66.495 Az status=0009 Ze status=0008 05:54:23 Check angles 05:54:23 SkyScan query 05:54:24 SkyScan query done: ret=0 az=152.43<-10162 ze=66.495<-7567 Statuses=0009 0008 05:54:24 Msec=3750 True Az=152.43 Ze=66.495 Az status=0009 Ze status=0008 05:54:24 Check angles 05:54:24 SkyScan query 05:54:24 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 05:54:24 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 05:54:24 Message to Master queued w/err=0: serial=132969 error=0 05:54:29 Received message from Master: op=Filter serial=132970 05:54:29 Color wheel filter change from 0 to 0 05:54:29 FLIGetFilterPos err=0 currentPosition=0 05:54:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:29 Filter is already there-color wheel unchanged 05:54:30 Received message from Master: op=Shutter serial=132971 05:54:30 Shutter LASER close 05:54:30 Received message from Camera: op=State serial=132973 05:54:30 GetSingleValue result=40 Value=cccccccc 05:54:30 SkyScan query 05:54:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:54:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:30 Parameters OK 05:54:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:30 Set A/D data flow result=40 05:54:30 Set A/D channel type result=40 05:54:30 Set A/D encoding result=40 05:54:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:30 Set channel filter=0.000000e+000 result=40 05:54:30 Config A/D Result=40 05:54:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:30 Get A/D filter: -9.255963e+061 result=40 05:54:30 Get A/D value=-858993460 result=40 05:54:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:30 Parameters OK 05:54:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:30 Set A/D data flow result=40 05:54:30 Set A/D channel type result=40 05:54:30 Set A/D encoding result=40 05:54:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:30 Set channel filter=0.000000e+000 result=40 05:54:30 Config A/D Result=40 05:54:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:30 Get A/D filter: -9.255963e+061 result=40 05:54:30 Get A/D value=-858993460 result=40 05:54:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:30 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:30 Aux= 05:54:30 Message to Camera, serial 132973 queued 05:55:07 Received message from Master: op=PointingHead serial=132986 05:55:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:55:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:55:07 Point started: ret=0 05:55:07 point_skyscan result=0 05:55:08 Check angles 05:55:08 SkyScan query 05:55:09 SkyScan query done: ret=0 az=135.18<-9012 ze=36.915<-9539 Statuses=0009 0009 05:55:09 Msec=0 True Az=135.18 Ze=36.915 Az status=0009 Ze status=0009 05:55:09 Check angles 05:55:09 SkyScan query 05:55:09 SkyScan query done: ret=0 az=117.69<-7846 ze=15.96<-10936 Statuses=0009 0009 05:55:09 Msec=750 True Az=117.69 Ze=15.96 Az status=0009 Ze status=0009 05:55:10 Check angles 05:55:10 SkyScan query 05:55:10 SkyScan query done: ret=0 az=100.305<-6687 ze=-4.98<-12332 Statuses=0009 0009 05:55:10 Msec=1500 True Az=100.305 Ze=-4.98 Az status=0009 Ze status=0009 05:55:10 Check angles 05:55:10 SkyScan query 05:55:11 SkyScan query done: ret=0 az=82.8<-5520 ze=-25.935<-13729 Statuses=0009 0009 05:55:11 Msec=2250 True Az=82.8 Ze=-25.935 Az status=0009 Ze status=0009 05:55:11 Check angles 05:55:11 SkyScan query 05:55:12 SkyScan query done: ret=0 az=65.325<-4355 ze=-38.58<-14572 Statuses=0009 0008 05:55:12 Msec=3000 True Az=65.325 Ze=-38.58 Az status=0009 Ze status=0008 05:55:12 Check angles 05:55:12 SkyScan query 05:55:12 SkyScan query done: ret=0 az=47.895<-3193 ze=-38.52<-14568 Statuses=0009 0008 05:55:12 Msec=3750 True Az=47.895 Ze=-38.52 Az status=0009 Ze status=0008 05:55:13 Check angles 05:55:13 SkyScan query 05:55:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:55:13 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:55:13 Message to Master queued w/err=0: serial=132986 error=0 05:55:18 Received message from Master: op=Filter serial=132987 05:55:18 Color wheel filter change from 0 to 0 05:55:18 FLIGetFilterPos err=0 currentPosition=0 05:55:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:18 Filter is already there-color wheel unchanged 05:55:18 Received message from Master: op=Shutter serial=132988 05:55:18 Shutter LASER close 05:55:18 Received message from Camera: op=State serial=132990 05:55:18 GetSingleValue result=40 Value=cccccccc 05:55:18 SkyScan query 05:55:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:55:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:19 Parameters OK 05:55:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:19 Set A/D data flow result=40 05:55:19 Set A/D channel type result=40 05:55:19 Set A/D encoding result=40 05:55:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:19 Set channel filter=0.000000e+000 result=40 05:55:19 Config A/D Result=40 05:55:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:19 Get A/D filter: -9.255963e+061 result=40 05:55:19 Get A/D value=-858993460 result=40 05:55:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:19 Parameters OK 05:55:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:19 Set A/D data flow result=40 05:55:19 Set A/D channel type result=40 05:55:19 Set A/D encoding result=40 05:55:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:19 Set channel filter=0.000000e+000 result=40 05:55:19 Config A/D Result=40 05:55:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:19 Get A/D filter: -9.255963e+061 result=40 05:55:19 Get A/D value=-858993460 result=40 05:55:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:19 Aux= 05:55:19 Message to Camera, serial 132990 queued [UTC 2018-12-14 05:55:52] 05:55:55 Received message from Master: op=PointingHead serial=133002 05:55:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:55:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:55:55 Point started: ret=0 05:55:55 point_skyscan result=0 05:55:56 Check angles 05:55:56 SkyScan query 05:55:57 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.25<-16550 Statuses=0009 0009 05:55:57 Msec=0 True Az=63.99 Ze=-68.25 Az status=0009 Ze status=0009 05:55:57 Check angles 05:55:57 SkyScan query 05:55:57 SkyScan query done: ret=0 az=81.765<-5451 ze=-89.655<-17977 Statuses=0009 0009 05:55:57 Msec=750 True Az=81.765 Ze=-89.655 Az status=0009 Ze status=0009 05:55:57 Check angles 05:55:57 SkyScan query 05:55:58 SkyScan query done: ret=0 az=99.225<-6615 ze=-110.625<-19375 Statuses=0009 0009 05:55:58 Msec=1500 True Az=99.225 Ze=-110.625 Az status=0009 Ze status=0009 05:55:58 Check angles 05:55:58 SkyScan query 05:55:59 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.52<-20768 Statuses=0009 0009 05:55:59 Msec=2250 True Az=116.715 Ze=-131.52 Az status=0009 Ze status=0009 05:55:59 Check angles 05:55:59 SkyScan query 05:56:00 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 05:56:00 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 05:56:00 Check angles 05:56:00 SkyScan query 05:56:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 05:56:00 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 05:56:00 Message to Master queued w/err=0: serial=133002 error=0 05:56:05 Received message from Master: op=Filter serial=133003 05:56:05 Color wheel filter change from 0 to 0 05:56:05 FLIGetFilterPos err=0 currentPosition=0 05:56:05 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:05 Filter is already there-color wheel unchanged 05:56:05 Received message from Master: op=Shutter serial=133004 05:56:05 Shutter LASER close 05:56:06 Received message from Camera: op=State serial=133006 05:56:06 GetSingleValue result=40 Value=cccccccc 05:56:06 SkyScan query 05:56:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:56:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:06 Parameters OK 05:56:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:06 Set A/D data flow result=40 05:56:06 Set A/D channel type result=40 05:56:06 Set A/D encoding result=40 05:56:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:06 Set channel filter=0.000000e+000 result=40 05:56:06 Config A/D Result=40 05:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:06 Get A/D filter: -9.255963e+061 result=40 05:56:06 Get A/D value=-858993460 result=40 05:56:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:06 Parameters OK 05:56:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:06 Set A/D data flow result=40 05:56:06 Set A/D channel type result=40 05:56:06 Set A/D encoding result=40 05:56:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:06 Set channel filter=0.000000e+000 result=40 05:56:06 Config A/D Result=40 05:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:06 Get A/D filter: -9.255963e+061 result=40 05:56:06 Get A/D value=-858993460 result=40 05:56:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:06 Aux= 05:56:06 Message to Camera, serial 133006 queued 05:56:43 Received message from Master: op=PointingHead serial=133019 05:56:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:56:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:56:43 Point started: ret=0 05:56:43 point_skyscan result=0 05:56:44 Check angles 05:56:44 SkyScan query 05:56:45 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 05:56:45 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 05:56:45 Check angles 05:56:45 SkyScan query 05:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:56:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:56:45 Message to Master queued w/err=0: serial=133019 error=0 05:56:50 Received message from Master: op=Filter serial=133020 05:56:50 Color wheel filter change from 0 to 0 05:56:50 FLIGetFilterPos err=0 currentPosition=0 05:56:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:50 Filter is already there-color wheel unchanged 05:56:51 Received message from Master: op=Shutter serial=133021 05:56:51 Shutter LASER open 05:56:51 Received message from Camera: op=State serial=133023 05:56:51 GetSingleValue result=40 Value=cccccccc 05:56:51 SkyScan query 05:56:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:56:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:51 Parameters OK 05:56:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:51 Set A/D data flow result=40 05:56:51 Set A/D channel type result=40 05:56:51 Set A/D encoding result=40 05:56:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:51 Set channel filter=0.000000e+000 result=40 05:56:51 Config A/D Result=40 05:56:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:51 Get A/D filter: -9.255963e+061 result=40 05:56:51 Get A/D value=-858993460 result=40 05:56:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:51 Parameters OK 05:56:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:51 Set A/D data flow result=40 05:56:51 Set A/D channel type result=40 05:56:51 Set A/D encoding result=40 05:56:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:51 Set channel filter=0.000000e+000 result=40 05:56:51 Config A/D Result=40 05:56:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:51 Get A/D filter: -9.255963e+061 result=40 05:56:51 Get A/D value=-858993460 result=40 05:56:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:51 Aux= 05:56:51 Message to Camera, serial 133023 queued 05:57:00 Received message from Master: op=Shutter serial=133033 05:57:00 Shutter LASER close 05:57:00 Received message from Master: op=PointingHead serial=133037 05:57:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:57:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:57:01 Point started: ret=0 05:57:01 point_skyscan result=0 05:57:01 Check angles 05:57:01 SkyScan query 05:57:02 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.52<-21568 Statuses=0009 0009 05:57:02 Msec=0 True Az=135.735 Ze=-143.52 Az status=0009 Ze status=0009 05:57:02 Check angles 05:57:02 SkyScan query 05:57:03 SkyScan query done: ret=0 az=153.345<-10223 ze=-122.52<-20168 Statuses=0009 0009 05:57:03 Msec=750 True Az=153.345 Ze=-122.52 Az status=0009 Ze status=0009 05:57:03 Check angles 05:57:03 SkyScan query 05:57:04 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.655<-18777 Statuses=0009 0009 05:57:04 Msec=1500 True Az=170.76 Ze=-101.655 Az status=0009 Ze status=0009 05:57:04 Check angles 05:57:04 SkyScan query 05:57:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.595<-17373 Statuses=0008 0009 05:57:04 Msec=2250 True Az=176.01 Ze=-80.595 Az status=0008 Ze status=0009 05:57:04 Check angles 05:57:04 SkyScan query 05:57:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.685<-15979 Statuses=0008 0009 05:57:05 Msec=3000 True Az=176.01 Ze=-59.685 Az status=0008 Ze status=0009 05:57:05 Check angles 05:57:05 SkyScan query 05:57:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 05:57:06 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 05:57:06 Message to Master queued w/err=0: serial=133037 error=0 05:57:11 Received message from Master: op=Filter serial=133038 05:57:11 Color wheel filter change from 0 to 0 05:57:11 FLIGetFilterPos err=0 currentPosition=0 05:57:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:11 Filter is already there-color wheel unchanged 05:57:11 Received message from Master: op=Shutter serial=133039 05:57:11 Shutter LASER close 05:57:11 Received message from Camera: op=State serial=133041 05:57:11 GetSingleValue result=40 Value=cccccccc 05:57:11 SkyScan query 05:57:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:57:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:12 Parameters OK 05:57:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:12 Set A/D data flow result=40 05:57:12 Set A/D channel type result=40 05:57:12 Set A/D encoding result=40 05:57:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:12 Set channel filter=0.000000e+000 result=40 05:57:12 Config A/D Result=40 05:57:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:12 Get A/D filter: -9.255963e+061 result=40 05:57:12 Get A/D value=-858993460 result=40 05:57:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:12 Parameters OK 05:57:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:12 Set A/D data flow result=40 05:57:12 Set A/D channel type result=40 05:57:12 Set A/D encoding result=40 05:57:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:12 Set channel filter=0.000000e+000 result=40 05:57:12 Config A/D Result=40 05:57:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:12 Get A/D filter: -9.255963e+061 result=40 05:57:12 Get A/D value=-858993460 result=40 05:57:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:12 Aux= 05:57:12 Message to Camera, serial 133041 queued 05:57:48 Received message from Master: op=PointingHead serial=133053 05:57:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:57:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:57:48 Point started: ret=0 05:57:48 point_skyscan result=0 05:57:49 Check angles 05:57:49 SkyScan query 05:57:49 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.72<-13448 Statuses=0009 0009 05:57:49 Msec=0 True Az=152.925 Ze=-21.72 Az status=0009 Ze status=0009 05:57:49 Check angles 05:57:49 SkyScan query 05:57:50 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.735<-12049 Statuses=0009 0009 05:57:50 Msec=750 True Az=135.39 Ze=-0.735 Az status=0009 Ze status=0009 05:57:50 Check angles 05:57:50 SkyScan query 05:57:51 SkyScan query done: ret=0 az=117.57<-7838 ze=20.685<-10621 Statuses=0009 0009 05:57:51 Msec=1500 True Az=117.57 Ze=20.685 Az status=0009 Ze status=0009 05:57:51 Check angles 05:57:51 SkyScan query 05:57:51 SkyScan query done: ret=0 az=100.23<-6682 ze=41.625<-9225 Statuses=0009 0009 05:57:51 Msec=2250 True Az=100.23 Ze=41.625 Az status=0009 Ze status=0009 05:57:52 Check angles 05:57:52 SkyScan query 05:57:52 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 05:57:52 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 05:57:52 Check angles 05:57:52 SkyScan query 05:57:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:57:53 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:57:53 Message to Master queued w/err=0: serial=133053 error=0 05:57:58 Received message from Master: op=Filter serial=133054 05:57:58 Color wheel filter change from 0 to 0 05:57:58 FLIGetFilterPos err=0 currentPosition=0 05:57:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:58 Filter is already there-color wheel unchanged 05:57:58 Received message from Master: op=Shutter serial=133055 05:57:58 Shutter LASER close 05:57:58 Received message from Camera: op=State serial=133057 05:57:58 GetSingleValue result=40 Value=cccccccc 05:57:58 SkyScan query 05:57:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:57:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:59 Parameters OK 05:57:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:59 Set A/D data flow result=40 05:57:59 Set A/D channel type result=40 05:57:59 Set A/D encoding result=40 05:57:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:59 Set channel filter=0.000000e+000 result=40 05:57:59 Config A/D Result=40 05:57:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:59 Get A/D filter: -9.255963e+061 result=40 05:57:59 Get A/D value=-858993460 result=40 05:57:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:59 Parameters OK 05:57:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:59 Set A/D data flow result=40 05:57:59 Set A/D channel type result=40 05:57:59 Set A/D encoding result=40 05:57:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:59 Set channel filter=0.000000e+000 result=40 05:57:59 Config A/D Result=40 05:57:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:59 Get A/D filter: -9.255963e+061 result=40 05:57:59 Get A/D value=-858993460 result=40 05:57:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:59 Aux= 05:57:59 Message to Camera, serial 133057 queued 05:58:36 Received message from Master: op=PointingHead serial=133070 05:58:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:58:36 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:58:36 Point started: ret=0 05:58:36 point_skyscan result=0 05:58:37 Check angles 05:58:37 SkyScan query 05:58:37 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 05:58:37 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 05:58:37 Check angles 05:58:37 SkyScan query 05:58:38 SkyScan query done: ret=0 az=126.555<-8437 ze=38.505<-9433 Statuses=0009 0008 05:58:38 Msec=750 True Az=126.555 Ze=38.505 Az status=0009 Ze status=0008 05:58:38 Check angles 05:58:38 SkyScan query 05:58:39 SkyScan query done: ret=0 az=143.985<-9599 ze=38.505<-9433 Statuses=0009 0008 05:58:39 Msec=1500 True Az=143.985 Ze=38.505 Az status=0009 Ze status=0008 05:58:39 Check angles 05:58:39 SkyScan query 05:58:40 SkyScan query done: ret=0 az=161.475<-10765 ze=38.505<-9433 Statuses=0009 0008 05:58:40 Msec=2250 True Az=161.475 Ze=38.505 Az status=0009 Ze status=0008 05:58:40 Check angles 05:58:40 SkyScan query 05:58:40 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:58:40 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:58:40 Check angles 05:58:40 SkyScan query 05:58:41 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:58:41 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:58:41 Message to Master queued w/err=0: serial=133070 error=0 05:58:46 Received message from Master: op=Filter serial=133071 05:58:46 Color wheel filter change from 0 to 0 05:58:46 FLIGetFilterPos err=0 currentPosition=0 05:58:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:46 Filter is already there-color wheel unchanged 05:58:46 Received message from Master: op=Shutter serial=133072 05:58:46 Shutter LASER close 05:58:46 Received message from Camera: op=State serial=133074 05:58:46 GetSingleValue result=40 Value=cccccccc 05:58:46 SkyScan query 05:58:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:58:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:47 Parameters OK 05:58:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:47 Set A/D data flow result=40 05:58:47 Set A/D channel type result=40 05:58:47 Set A/D encoding result=40 05:58:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:47 Set channel filter=0.000000e+000 result=40 05:58:47 Config A/D Result=40 05:58:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:47 Get A/D filter: -9.255963e+061 result=40 05:58:47 Get A/D value=-858993460 result=40 05:58:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:47 Parameters OK 05:58:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:47 Set A/D data flow result=40 05:58:47 Set A/D channel type result=40 05:58:47 Set A/D encoding result=40 05:58:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:47 Set channel filter=0.000000e+000 result=40 05:58:47 Config A/D Result=40 05:58:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:47 Get A/D filter: -9.255963e+061 result=40 05:58:47 Get A/D value=-858993460 result=40 05:58:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:47 Aux= 05:58:47 Message to Camera, serial 133074 queued 05:59:24 Received message from Master: op=PointingHead serial=133087 05:59:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:59:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:59:24 Point started: ret=0 05:59:24 point_skyscan result=0 05:59:25 Check angles 05:59:25 SkyScan query 05:59:25 SkyScan query done: ret=0 az=152.955<-10197 ze=8.715<-11419 Statuses=0009 0009 05:59:25 Msec=0 True Az=152.955 Ze=8.715 Az status=0009 Ze status=0009 05:59:26 Check angles 05:59:26 SkyScan query 05:59:26 SkyScan query done: ret=0 az=135.525<-9035 ze=-12.27<-12818 Statuses=0009 0009 05:59:26 Msec=750 True Az=135.525 Ze=-12.27 Az status=0009 Ze status=0009 05:59:26 Check angles 05:59:26 SkyScan query 05:59:27 SkyScan query done: ret=0 az=118.005<-7867 ze=-33.195<-14213 Statuses=0009 0009 05:59:27 Msec=1500 True Az=118.005 Ze=-33.195 Az status=0009 Ze status=0009 05:59:27 Check angles 05:59:27 SkyScan query 05:59:28 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.57<-15438 Statuses=0009 0009 05:59:28 Msec=2250 True Az=100.2 Ze=-51.57 Az status=0009 Ze status=0009 05:59:28 Check angles 05:59:28 SkyScan query 05:59:28 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 05:59:28 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 05:59:29 Check angles 05:59:29 SkyScan query 05:59:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:59:29 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:59:29 Message to Master queued w/err=0: serial=133087 error=0 05:59:34 Received message from Master: op=Filter serial=133088 05:59:34 Color wheel filter change from 0 to 0 05:59:34 FLIGetFilterPos err=0 currentPosition=0 05:59:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:34 Filter is already there-color wheel unchanged 05:59:34 Received message from Master: op=Shutter serial=133089 05:59:34 Shutter LASER close 05:59:34 Received message from Camera: op=State serial=133091 05:59:34 GetSingleValue result=40 Value=cccccccc 05:59:34 SkyScan query 05:59:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:59:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:35 Parameters OK 05:59:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:35 Set A/D data flow result=40 05:59:35 Set A/D channel type result=40 05:59:35 Set A/D encoding result=40 05:59:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:35 Set channel filter=0.000000e+000 result=40 05:59:35 Config A/D Result=40 05:59:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:35 Get A/D filter: -9.255963e+061 result=40 05:59:35 Get A/D value=-858993460 result=40 05:59:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:35 Parameters OK 05:59:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:35 Set A/D data flow result=40 05:59:35 Set A/D channel type result=40 05:59:35 Set A/D encoding result=40 05:59:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:35 Set channel filter=0.000000e+000 result=40 05:59:35 Config A/D Result=40 05:59:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:35 Get A/D filter: -9.255963e+061 result=40 05:59:35 Get A/D value=-858993460 result=40 05:59:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:35 Aux= 05:59:35 Message to Camera, serial 133091 queued 06:00:12 Received message from Master: op=PointingHead serial=133104 06:00:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:00:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:00:12 Point started: ret=0 06:00:12 point_skyscan result=0 06:00:13 Check angles 06:00:13 SkyScan query 06:00:13 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.045<-17403 Statuses=0009 0009 06:00:13 Msec=0 True Az=108.795 Ze=-81.045 Az status=0009 Ze status=0009 06:00:14 Check angles 06:00:14 SkyScan query 06:00:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-102<-18800 Statuses=0008 0009 06:00:14 Msec=750 True Az=112.995 Ze=-102 Az status=0008 Ze status=0009 06:00:14 Check angles 06:00:14 SkyScan query 06:00:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 06:00:15 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 06:00:15 Check angles 06:00:15 SkyScan query 06:00:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 06:00:16 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 06:00:16 Check angles 06:00:16 SkyScan query 06:00:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.315<-23021 Statuses=0008 0009 06:00:17 Msec=3000 True Az=112.995 Ze=-165.315 Az status=0008 Ze status=0009 06:00:17 Check angles 06:00:17 SkyScan query 06:00:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 06:00:17 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 06:00:17 Message to Master queued w/err=0: serial=133104 error=0 06:00:22 Received message from Master: op=Filter serial=133105 06:00:22 Color wheel filter change from 0 to 0 06:00:22 FLIGetFilterPos err=0 currentPosition=0 06:00:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:22 Filter is already there-color wheel unchanged 06:00:22 Received message from Master: op=Shutter serial=133106 06:00:22 Shutter LASER open 06:00:23 Received message from Camera: op=State serial=133108 06:00:23 GetSingleValue result=40 Value=cccccccc 06:00:23 SkyScan query 06:00:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:00:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:23 Parameters OK 06:00:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:23 Set A/D data flow result=40 06:00:23 Set A/D channel type result=40 06:00:23 Set A/D encoding result=40 06:00:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:23 Set channel filter=0.000000e+000 result=40 06:00:23 Config A/D Result=40 06:00:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:23 Get A/D filter: -9.255963e+061 result=40 06:00:23 Get A/D value=-858993460 result=40 06:00:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:23 Parameters OK 06:00:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:23 Set A/D data flow result=40 06:00:23 Set A/D channel type result=40 06:00:23 Set A/D encoding result=40 06:00:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:23 Set channel filter=0.000000e+000 result=40 06:00:23 Config A/D Result=40 06:00:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:23 Get A/D filter: -9.255963e+061 result=40 06:00:23 Get A/D value=-858993460 result=40 06:00:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:23 Aux= 06:00:23 Message to Camera, serial 133108 queued 06:00:32 Received message from Master: op=Shutter serial=133118 06:00:32 Shutter LASER close 06:00:32 Received message from Master: op=PointingHead serial=133122 06:00:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:00:32 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:00:32 Point started: ret=0 06:00:32 point_skyscan result=0 06:00:33 Check angles 06:00:33 SkyScan query 06:00:34 SkyScan query done: ret=0 az=90.15<-6010 ze=157.53<-1498 Statuses=0009 0009 06:00:34 Msec=0 True Az=90.15 Ze=157.53 Az status=0009 Ze status=0009 06:00:34 Check angles 06:00:34 SkyScan query 06:00:34 SkyScan query done: ret=0 az=72.765<-4851 ze=136.53<-2898 Statuses=0009 0009 06:00:34 Msec=750 True Az=72.765 Ze=136.53 Az status=0009 Ze status=0009 06:00:35 Check angles 06:00:35 SkyScan query 06:00:35 SkyScan query done: ret=0 az=55.23<-3682 ze=115.635<-4291 Statuses=0009 0009 06:00:35 Msec=1500 True Az=55.23 Ze=115.635 Az status=0009 Ze status=0009 06:00:35 Check angles 06:00:35 SkyScan query 06:00:36 SkyScan query done: ret=0 az=41.01<-2734 ze=94.635<-5691 Statuses=0009 0009 06:00:36 Msec=2250 True Az=41.01 Ze=94.635 Az status=0009 Ze status=0009 06:00:36 Check angles 06:00:36 SkyScan query 06:00:37 SkyScan query done: ret=0 az=40.995<-2733 ze=73.71<-7086 Statuses=0008 0009 06:00:37 Msec=3000 True Az=40.995 Ze=73.71 Az status=0008 Ze status=0009 06:00:37 Check angles 06:00:37 SkyScan query 06:00:37 SkyScan query done: ret=0 az=40.995<-2733 ze=53.04<-8464 Statuses=0008 0009 06:00:37 Msec=3750 True Az=40.995 Ze=53.04 Az status=0008 Ze status=0009 06:00:38 Check angles 06:00:38 SkyScan query 06:00:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:00:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:00:38 Message to Master queued w/err=0: serial=133122 error=0 06:00:43 Received message from Master: op=Filter serial=133123 06:00:43 Color wheel filter change from 0 to 0 06:00:43 FLIGetFilterPos err=0 currentPosition=0 06:00:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:43 Filter is already there-color wheel unchanged 06:00:43 Received message from Master: op=Shutter serial=133124 06:00:43 Shutter LASER close 06:00:44 Received message from Camera: op=State serial=133126 06:00:44 GetSingleValue result=40 Value=cccccccc 06:00:44 SkyScan query 06:00:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:00:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:44 Parameters OK 06:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:44 Set A/D data flow result=40 06:00:44 Set A/D channel type result=40 06:00:44 Set A/D encoding result=40 06:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:44 Set channel filter=0.000000e+000 result=40 06:00:44 Config A/D Result=40 06:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:44 Get A/D filter: -9.255963e+061 result=40 06:00:44 Get A/D value=-858993460 result=40 06:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:44 Parameters OK 06:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:44 Set A/D data flow result=40 06:00:44 Set A/D channel type result=40 06:00:44 Set A/D encoding result=40 06:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:44 Set channel filter=0.000000e+000 result=40 06:00:44 Config A/D Result=40 06:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:44 Get A/D filter: -9.255963e+061 result=40 06:00:44 Get A/D value=-858993460 result=40 06:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:44 Aux= 06:00:44 Message to Camera, serial 133126 queued 06:01:21 Received message from Master: op=PointingHead serial=133139 06:01:21 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:01:21 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:01:21 Point started: ret=0 06:01:21 point_skyscan result=0 06:01:22 Check angles 06:01:22 SkyScan query 06:01:23 SkyScan query done: ret=0 az=64.185<-4279 ze=66.54<-7564 Statuses=0009 0008 06:01:23 Msec=0 True Az=64.185 Ze=66.54 Az status=0009 Ze status=0008 06:01:23 Check angles 06:01:23 SkyScan query 06:01:23 SkyScan query done: ret=0 az=81.75<-5450 ze=66.51<-7566 Statuses=0009 0008 06:01:23 Msec=750 True Az=81.75 Ze=66.51 Az status=0009 Ze status=0008 06:01:24 Check angles 06:01:24 SkyScan query 06:01:24 SkyScan query done: ret=0 az=99.465<-6631 ze=66.495<-7567 Statuses=0009 0008 06:01:24 Msec=1500 True Az=99.465 Ze=66.495 Az status=0009 Ze status=0008 06:01:24 Check angles 06:01:24 SkyScan query 06:01:25 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 06:01:25 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 06:01:25 Check angles 06:01:25 SkyScan query 06:01:26 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 06:01:26 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 06:01:26 Check angles 06:01:26 SkyScan query 06:01:26 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 06:01:26 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 06:01:27 Check angles 06:01:27 SkyScan query 06:01:27 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 06:01:27 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 06:01:27 Message to Master queued w/err=0: serial=133139 error=0 06:01:32 Received message from Master: op=Filter serial=133140 06:01:32 Color wheel filter change from 0 to 0 06:01:32 FLIGetFilterPos err=0 currentPosition=0 06:01:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:32 Filter is already there-color wheel unchanged 06:01:32 Received message from Master: op=Shutter serial=133141 06:01:32 Shutter LASER close 06:01:32 Received message from Camera: op=State serial=133143 06:01:32 GetSingleValue result=40 Value=cccccccc 06:01:32 SkyScan query 06:01:33 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:01:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:33 Parameters OK 06:01:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:33 Set A/D data flow result=40 06:01:33 Set A/D channel type result=40 06:01:33 Set A/D encoding result=40 06:01:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:33 Set channel filter=0.000000e+000 result=40 06:01:33 Config A/D Result=40 06:01:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:33 Get A/D filter: -9.255963e+061 result=40 06:01:33 Get A/D value=-858993460 result=40 06:01:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:33 Parameters OK 06:01:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:33 Set A/D data flow result=40 06:01:33 Set A/D channel type result=40 06:01:33 Set A/D encoding result=40 06:01:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:33 Set channel filter=0.000000e+000 result=40 06:01:33 Config A/D Result=40 06:01:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:33 Get A/D filter: -9.255963e+061 result=40 06:01:33 Get A/D value=-858993460 result=40 06:01:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:33 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:33 Aux= 06:01:33 Message to Camera, serial 133143 queued 06:02:10 Received message from Master: op=PointingHead serial=133156 06:02:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:02:10 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:02:10 Point started: ret=0 06:02:10 point_skyscan result=0 06:02:11 Check angles 06:02:11 SkyScan query 06:02:11 SkyScan query done: ret=0 az=135.195<-9013 ze=36.945<-9537 Statuses=0009 0009 06:02:11 Msec=0 True Az=135.195 Ze=36.945 Az status=0009 Ze status=0009 06:02:12 Check angles 06:02:12 SkyScan query 06:02:12 SkyScan query done: ret=0 az=117.69<-7846 ze=15.99<-10934 Statuses=0009 0009 06:02:12 Msec=750 True Az=117.69 Ze=15.99 Az status=0009 Ze status=0009 06:02:12 Check angles 06:02:12 SkyScan query 06:02:13 SkyScan query done: ret=0 az=100.335<-6689 ze=-4.95<-12330 Statuses=0009 0009 06:02:13 Msec=1500 True Az=100.335 Ze=-4.95 Az status=0009 Ze status=0009 06:02:13 Check angles 06:02:13 SkyScan query 06:02:14 SkyScan query done: ret=0 az=82.845<-5523 ze=-25.905<-13727 Statuses=0009 0009 06:02:14 Msec=2250 True Az=82.845 Ze=-25.905 Az status=0009 Ze status=0009 06:02:14 Check angles 06:02:14 SkyScan query 06:02:14 SkyScan query done: ret=0 az=65.31<-4354 ze=-38.58<-14572 Statuses=0009 0008 06:02:14 Msec=3000 True Az=65.31 Ze=-38.58 Az status=0009 Ze status=0008 06:02:15 Check angles 06:02:15 SkyScan query 06:02:15 SkyScan query done: ret=0 az=47.88<-3192 ze=-38.52<-14568 Statuses=0009 0008 06:02:15 Msec=3750 True Az=47.88 Ze=-38.52 Az status=0009 Ze status=0008 06:02:15 Check angles 06:02:15 SkyScan query 06:02:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:02:16 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:02:16 Message to Master queued w/err=0: serial=133156 error=0 06:02:21 Received message from Master: op=Filter serial=133157 06:02:21 Color wheel filter change from 0 to 0 06:02:21 FLIGetFilterPos err=0 currentPosition=0 06:02:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:21 Filter is already there-color wheel unchanged 06:02:21 Received message from Master: op=Shutter serial=133158 06:02:21 Shutter LASER close 06:02:21 Received message from Camera: op=State serial=133160 06:02:21 GetSingleValue result=40 Value=cccccccc 06:02:21 SkyScan query 06:02:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:02:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:22 Parameters OK 06:02:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:22 Set A/D data flow result=40 06:02:22 Set A/D channel type result=40 06:02:22 Set A/D encoding result=40 06:02:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:22 Set channel filter=0.000000e+000 result=40 06:02:22 Config A/D Result=40 06:02:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:22 Get A/D filter: -9.255963e+061 result=40 06:02:22 Get A/D value=-858993460 result=40 06:02:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:22 Parameters OK 06:02:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:22 Set A/D data flow result=40 06:02:22 Set A/D channel type result=40 06:02:22 Set A/D encoding result=40 06:02:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:22 Set channel filter=0.000000e+000 result=40 06:02:22 Config A/D Result=40 06:02:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:22 Get A/D filter: -9.255963e+061 result=40 06:02:22 Get A/D value=-858993460 result=40 06:02:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:22 Aux= 06:02:22 Message to Camera, serial 133160 queued 06:02:59 Received message from Master: op=PointingHead serial=133173 06:02:59 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:02:59 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:02:59 Point started: ret=0 06:02:59 point_skyscan result=0 06:03:00 Check angles 06:03:00 SkyScan query 06:03:00 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.28<-16552 Statuses=0009 0009 06:03:00 Msec=0 True Az=63.93 Ze=-68.28 Az status=0009 Ze status=0009 06:03:00 Check angles 06:03:00 SkyScan query 06:03:01 SkyScan query done: ret=0 az=81.435<-5429 ze=-89.28<-17952 Statuses=0009 0009 06:03:01 Msec=750 True Az=81.435 Ze=-89.28 Az status=0009 Ze status=0009 06:03:01 Check angles 06:03:01 SkyScan query 06:03:02 SkyScan query done: ret=0 az=99.24<-6616 ze=-110.67<-19378 Statuses=0009 0009 06:03:02 Msec=1500 True Az=99.24 Ze=-110.67 Az status=0009 Ze status=0009 06:03:02 Check angles 06:03:02 SkyScan query 06:03:03 SkyScan query done: ret=0 az=116.79<-7786 ze=-131.58<-20772 Statuses=0009 0009 06:03:03 Msec=2250 True Az=116.79 Ze=-131.58 Az status=0009 Ze status=0009 06:03:03 Check angles 06:03:03 SkyScan query 06:03:03 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 06:03:03 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 06:03:03 Check angles 06:03:03 SkyScan query 06:03:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 06:03:04 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 06:03:04 Message to Master queued w/err=0: serial=133173 error=0 06:03:09 Received message from Master: op=Filter serial=133174 06:03:09 Color wheel filter change from 0 to 0 06:03:09 FLIGetFilterPos err=0 currentPosition=0 06:03:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:09 Filter is already there-color wheel unchanged 06:03:09 Received message from Master: op=Shutter serial=133175 06:03:09 Shutter LASER close 06:03:09 Received message from Camera: op=State serial=133177 06:03:09 GetSingleValue result=40 Value=cccccccc 06:03:09 SkyScan query 06:03:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:03:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:10 Parameters OK 06:03:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:10 Set A/D data flow result=40 06:03:10 Set A/D channel type result=40 06:03:10 Set A/D encoding result=40 06:03:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:10 Set channel filter=0.000000e+000 result=40 06:03:10 Config A/D Result=40 06:03:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:10 Get A/D filter: -9.255963e+061 result=40 06:03:10 Get A/D value=-858993460 result=40 06:03:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:10 Parameters OK 06:03:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:10 Set A/D data flow result=40 06:03:10 Set A/D channel type result=40 06:03:10 Set A/D encoding result=40 06:03:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:10 Set channel filter=0.000000e+000 result=40 06:03:10 Config A/D Result=40 06:03:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:10 Get A/D filter: -9.255963e+061 result=40 06:03:10 Get A/D value=-858993460 result=40 06:03:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:10 Aux= 06:03:10 Message to Camera, serial 133177 queued 06:03:47 Received message from Master: op=PointingHead serial=133190 06:03:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:03:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:03:47 Point started: ret=0 06:03:47 point_skyscan result=0 06:03:48 Check angles 06:03:48 SkyScan query 06:03:48 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 06:03:48 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 06:03:49 Check angles 06:03:49 SkyScan query 06:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:03:49 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:03:49 Message to Master queued w/err=0: serial=133190 error=0 06:03:54 Received message from Master: op=Filter serial=133191 06:03:54 Color wheel filter change from 0 to 0 06:03:54 FLIGetFilterPos err=0 currentPosition=0 06:03:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:54 Filter is already there-color wheel unchanged 06:03:54 Received message from Master: op=Shutter serial=133192 06:03:54 Shutter LASER open 06:03:54 Received message from Camera: op=State serial=133194 06:03:54 GetSingleValue result=40 Value=cccccccc 06:03:54 SkyScan query 06:03:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:03:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:55 Parameters OK 06:03:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:55 Set A/D data flow result=40 06:03:55 Set A/D channel type result=40 06:03:55 Set A/D encoding result=40 06:03:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:55 Set channel filter=0.000000e+000 result=40 06:03:55 Config A/D Result=40 06:03:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:55 Get A/D filter: -9.255963e+061 result=40 06:03:55 Get A/D value=-858993460 result=40 06:03:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:55 Parameters OK 06:03:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:55 Set A/D data flow result=40 06:03:55 Set A/D channel type result=40 06:03:55 Set A/D encoding result=40 06:03:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:55 Set channel filter=0.000000e+000 result=40 06:03:55 Config A/D Result=40 06:03:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:55 Get A/D filter: -9.255963e+061 result=40 06:03:55 Get A/D value=-858993460 result=40 06:03:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:55 Aux= 06:03:55 Message to Camera, serial 133194 queued 06:04:03 Received message from Master: op=Shutter serial=133204 06:04:03 Shutter LASER close 06:04:04 Received message from Master: op=PointingHead serial=133208 06:04:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:04:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:04:04 Point started: ret=0 06:04:04 point_skyscan result=0 06:04:05 Check angles 06:04:05 SkyScan query 06:04:06 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.1<-21540 Statuses=0009 0009 06:04:06 Msec=0 True Az=136.185 Ze=-143.1 Az status=0009 Ze status=0009 06:04:06 Check angles 06:04:06 SkyScan query 06:04:06 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.145<-20143 Statuses=0009 0009 06:04:06 Msec=750 True Az=153.615 Ze=-122.145 Az status=0009 Ze status=0009 06:04:07 Check angles 06:04:07 SkyScan query 06:04:07 SkyScan query done: ret=0 az=171.135<-11409 ze=-101.235<-18749 Statuses=0009 0009 06:04:07 Msec=1500 True Az=171.135 Ze=-101.235 Az status=0009 Ze status=0009 06:04:07 Check angles 06:04:07 SkyScan query 06:04:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.83<-17322 Statuses=0008 0009 06:04:08 Msec=2250 True Az=176.01 Ze=-79.83 Az status=0008 Ze status=0009 06:04:08 Check angles 06:04:08 SkyScan query 06:04:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.83<-15922 Statuses=0008 0009 06:04:09 Msec=3000 True Az=176.01 Ze=-58.83 Az status=0008 Ze status=0009 06:04:09 Check angles 06:04:09 SkyScan query 06:04:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:04:10 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:04:10 Message to Master queued w/err=0: serial=133208 error=0 06:04:15 Received message from Master: op=Filter serial=133209 06:04:15 Color wheel filter change from 0 to 0 06:04:15 FLIGetFilterPos err=0 currentPosition=0 06:04:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:15 Filter is already there-color wheel unchanged 06:04:15 Received message from Master: op=Shutter serial=133210 06:04:15 Shutter LASER close 06:04:15 Received message from Camera: op=State serial=133212 06:04:15 GetSingleValue result=40 Value=cccccccc 06:04:15 SkyScan query 06:04:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:04:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:15 Parameters OK 06:04:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:15 Set A/D data flow result=40 06:04:15 Set A/D channel type result=40 06:04:15 Set A/D encoding result=40 06:04:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:15 Set channel filter=0.000000e+000 result=40 06:04:15 Config A/D Result=40 06:04:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:15 Get A/D filter: -9.255963e+061 result=40 06:04:15 Get A/D value=-858993460 result=40 06:04:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:15 Parameters OK 06:04:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:15 Set A/D data flow result=40 06:04:15 Set A/D channel type result=40 06:04:15 Set A/D encoding result=40 06:04:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:15 Set channel filter=0.000000e+000 result=40 06:04:15 Config A/D Result=40 06:04:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:15 Get A/D filter: -9.255963e+061 result=40 06:04:15 Get A/D value=-858993460 result=40 06:04:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:15 Aux= 06:04:15 Message to Camera, serial 133212 queued 06:04:51 Received message from Master: op=PointingHead serial=133224 06:04:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:04:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:04:52 Point started: ret=0 06:04:52 point_skyscan result=0 06:04:52 Check angles 06:04:52 SkyScan query 06:04:53 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.035<-13469 Statuses=0009 0009 06:04:53 Msec=0 True Az=153.225 Ze=-22.035 Az status=0009 Ze status=0009 06:04:53 Check angles 06:04:53 SkyScan query 06:04:54 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.035<-12069 Statuses=0009 0009 06:04:54 Msec=750 True Az=135.78 Ze=-1.035 Az status=0009 Ze status=0009 06:04:54 Check angles 06:04:54 SkyScan query 06:04:55 SkyScan query done: ret=0 az=118.245<-7883 ze=19.89<-10674 Statuses=0009 0009 06:04:55 Msec=1500 True Az=118.245 Ze=19.89 Az status=0009 Ze status=0009 06:04:55 Check angles 06:04:55 SkyScan query 06:04:55 SkyScan query done: ret=0 az=100.785<-6719 ze=40.89<-9274 Statuses=0009 0009 06:04:55 Msec=2250 True Az=100.785 Ze=40.89 Az status=0009 Ze status=0009 06:04:55 Check angles 06:04:55 SkyScan query 06:04:56 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 06:04:56 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 06:04:56 Check angles 06:04:56 SkyScan query 06:04:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:04:57 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:04:57 Message to Master queued w/err=0: serial=133224 error=0 06:05:02 Received message from Master: op=Filter serial=133225 06:05:02 Color wheel filter change from 0 to 0 06:05:02 FLIGetFilterPos err=0 currentPosition=0 06:05:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:02 Filter is already there-color wheel unchanged 06:05:02 Received message from Master: op=Shutter serial=133226 06:05:02 Shutter LASER close 06:05:02 Received message from Camera: op=State serial=133228 06:05:02 GetSingleValue result=40 Value=cccccccc 06:05:02 SkyScan query 06:05:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:05:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:03 Parameters OK 06:05:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:03 Set A/D data flow result=40 06:05:03 Set A/D channel type result=40 06:05:03 Set A/D encoding result=40 06:05:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:03 Set channel filter=0.000000e+000 result=40 06:05:03 Config A/D Result=40 06:05:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:03 Get A/D filter: -9.255963e+061 result=40 06:05:03 Get A/D value=-858993460 result=40 06:05:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:03 Parameters OK 06:05:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:03 Set A/D data flow result=40 06:05:03 Set A/D channel type result=40 06:05:03 Set A/D encoding result=40 06:05:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:03 Set channel filter=0.000000e+000 result=40 06:05:03 Config A/D Result=40 06:05:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:03 Get A/D filter: -9.255963e+061 result=40 06:05:03 Get A/D value=-858993460 result=40 06:05:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:03 Aux= 06:05:03 Message to Camera, serial 133228 queued 06:05:39 Received message from Master: op=PointingHead serial=133241 06:05:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:05:39 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:05:40 Point started: ret=0 06:05:40 point_skyscan result=0 06:05:40 Check angles 06:05:40 SkyScan query 06:05:41 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 06:05:41 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 06:05:41 Check angles 06:05:41 SkyScan query 06:05:42 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 06:05:42 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 06:05:42 Check angles 06:05:42 SkyScan query 06:05:43 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 06:05:43 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 06:05:43 Check angles 06:05:43 SkyScan query [UTC 2018-12-14 06:05:43] 06:05:43 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 06:05:43 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 06:05:44 Check angles 06:05:44 SkyScan query 06:05:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 06:05:44 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 06:05:44 Check angles 06:05:44 SkyScan query 06:05:45 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:05:45 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:05:45 Message to Master queued w/err=0: serial=133241 error=0 06:05:50 Received message from Master: op=Filter serial=133242 06:05:50 Color wheel filter change from 0 to 0 06:05:50 FLIGetFilterPos err=0 currentPosition=0 06:05:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:50 Filter is already there-color wheel unchanged 06:05:50 Received message from Master: op=Shutter serial=133243 06:05:50 Shutter LASER close 06:05:50 Received message from Camera: op=State serial=133245 06:05:50 GetSingleValue result=40 Value=cccccccc 06:05:50 SkyScan query 06:05:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:05:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:51 Parameters OK 06:05:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:51 Set A/D data flow result=40 06:05:51 Set A/D channel type result=40 06:05:51 Set A/D encoding result=40 06:05:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:51 Set channel filter=0.000000e+000 result=40 06:05:51 Config A/D Result=40 06:05:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:51 Get A/D filter: -9.255963e+061 result=40 06:05:51 Get A/D value=-858993460 result=40 06:05:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:51 Parameters OK 06:05:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:51 Set A/D data flow result=40 06:05:51 Set A/D channel type result=40 06:05:51 Set A/D encoding result=40 06:05:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:51 Set channel filter=0.000000e+000 result=40 06:05:51 Config A/D Result=40 06:05:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:51 Get A/D filter: -9.255963e+061 result=40 06:05:51 Get A/D value=-858993460 result=40 06:05:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:51 Aux= 06:05:51 Message to Camera, serial 133245 queued 06:06:27 Received message from Master: op=PointingHead serial=133258 06:06:27 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:06:27 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:06:28 Point started: ret=0 06:06:28 point_skyscan result=0 06:06:29 Check angles 06:06:29 SkyScan query 06:06:29 SkyScan query done: ret=0 az=153.21<-10214 ze=8.985<-11401 Statuses=0009 0009 06:06:29 Msec=0 True Az=153.21 Ze=8.985 Az status=0009 Ze status=0009 06:06:29 Check angles 06:06:29 SkyScan query 06:06:30 SkyScan query done: ret=0 az=135.765<-9051 ze=-12.015<-12801 Statuses=0009 0009 06:06:30 Msec=750 True Az=135.765 Ze=-12.015 Az status=0009 Ze status=0009 06:06:30 Check angles 06:06:30 SkyScan query 06:06:31 SkyScan query done: ret=0 az=118.215<-7881 ze=-32.91<-14194 Statuses=0009 0009 06:06:31 Msec=1500 True Az=118.215 Ze=-32.91 Az status=0009 Ze status=0009 06:06:31 Check angles 06:06:31 SkyScan query 06:06:31 SkyScan query done: ret=0 az=100.8<-6720 ze=-51.51<-15434 Statuses=0009 0009 06:06:31 Msec=2250 True Az=100.8 Ze=-51.51 Az status=0009 Ze status=0009 06:06:32 Check angles 06:06:32 SkyScan query 06:06:32 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 06:06:32 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 06:06:32 Check angles 06:06:32 SkyScan query 06:06:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:06:33 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:06:33 Message to Master queued w/err=0: serial=133258 error=0 06:06:38 Received message from Master: op=Filter serial=133259 06:06:38 Color wheel filter change from 0 to 0 06:06:38 FLIGetFilterPos err=0 currentPosition=0 06:06:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:38 Filter is already there-color wheel unchanged 06:06:38 Received message from Master: op=Shutter serial=133260 06:06:38 Shutter LASER close 06:06:38 Received message from Camera: op=State serial=133262 06:06:38 GetSingleValue result=40 Value=cccccccc 06:06:38 SkyScan query 06:06:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:06:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:39 Parameters OK 06:06:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:39 Set A/D data flow result=40 06:06:39 Set A/D channel type result=40 06:06:39 Set A/D encoding result=40 06:06:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:39 Set channel filter=0.000000e+000 result=40 06:06:39 Config A/D Result=40 06:06:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:39 Get A/D filter: -9.255963e+061 result=40 06:06:39 Get A/D value=-858993460 result=40 06:06:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:39 Parameters OK 06:06:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:39 Set A/D data flow result=40 06:06:39 Set A/D channel type result=40 06:06:39 Set A/D encoding result=40 06:06:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:39 Set channel filter=0.000000e+000 result=40 06:06:39 Config A/D Result=40 06:06:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:39 Get A/D filter: -9.255963e+061 result=40 06:06:39 Get A/D value=-858993460 result=40 06:06:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:39 Aux= 06:06:39 Message to Camera, serial 133262 queued 06:07:16 Received message from Master: op=PointingHead serial=133275 06:07:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:07:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:07:16 Point started: ret=0 06:07:16 point_skyscan result=0 06:07:17 Check angles 06:07:17 SkyScan query 06:07:17 SkyScan query done: ret=0 az=109.245<-7283 ze=-81.255<-17417 Statuses=0009 0009 06:07:17 Msec=0 True Az=109.245 Ze=-81.255 Az status=0009 Ze status=0009 06:07:17 Check angles 06:07:17 SkyScan query 06:07:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.24<-18816 Statuses=0008 0009 06:07:18 Msec=750 True Az=112.995 Ze=-102.24 Az status=0008 Ze status=0009 06:07:18 Check angles 06:07:18 SkyScan query 06:07:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.615<-20241 Statuses=0008 0009 06:07:19 Msec=1500 True Az=112.995 Ze=-123.615 Az status=0008 Ze status=0009 06:07:19 Check angles 06:07:19 SkyScan query 06:07:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.975<-21665 Statuses=0008 0009 06:07:19 Msec=2250 True Az=112.995 Ze=-144.975 Az status=0008 Ze status=0009 06:07:20 Check angles 06:07:20 SkyScan query 06:07:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.915<-23061 Statuses=0008 0009 06:07:20 Msec=3000 True Az=112.995 Ze=-165.915 Az status=0008 Ze status=0009 06:07:20 Check angles 06:07:20 SkyScan query 06:07:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:07:21 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:07:21 Message to Master queued w/err=0: serial=133275 error=0 06:07:26 Received message from Master: op=Filter serial=133276 06:07:26 Color wheel filter change from 0 to 0 06:07:26 FLIGetFilterPos err=0 currentPosition=0 06:07:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:26 Filter is already there-color wheel unchanged 06:07:26 Received message from Master: op=Shutter serial=133277 06:07:26 Shutter LASER open 06:07:26 Received message from Camera: op=State serial=133279 06:07:26 GetSingleValue result=40 Value=cccccccc 06:07:26 SkyScan query 06:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:07:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:27 Parameters OK 06:07:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:27 Set A/D data flow result=40 06:07:27 Set A/D channel type result=40 06:07:27 Set A/D encoding result=40 06:07:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:27 Set channel filter=0.000000e+000 result=40 06:07:27 Config A/D Result=40 06:07:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:27 Get A/D filter: -9.255963e+061 result=40 06:07:27 Get A/D value=-858993460 result=40 06:07:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:27 Parameters OK 06:07:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:27 Set A/D data flow result=40 06:07:27 Set A/D channel type result=40 06:07:27 Set A/D encoding result=40 06:07:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:27 Set channel filter=0.000000e+000 result=40 06:07:27 Config A/D Result=40 06:07:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:27 Get A/D filter: -9.255963e+061 result=40 06:07:27 Get A/D value=-858993460 result=40 06:07:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:27 Aux= 06:07:27 Message to Camera, serial 133279 queued 06:07:35 Received message from Master: op=Shutter serial=133289 06:07:35 Shutter LASER close 06:07:36 Received message from Master: op=PointingHead serial=133293 06:07:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:07:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:07:36 Point started: ret=0 06:07:36 point_skyscan result=0 06:07:37 Check angles 06:07:37 SkyScan query 06:07:37 SkyScan query done: ret=0 az=89.79<-5986 ze=157.035<-1531 Statuses=0009 0009 06:07:37 Msec=0 True Az=89.79 Ze=157.035 Az status=0009 Ze status=0009 06:07:38 Check angles 06:07:38 SkyScan query 06:07:38 SkyScan query done: ret=0 az=72.27<-4818 ze=136.11<-2926 Statuses=0009 0009 06:07:38 Msec=750 True Az=72.27 Ze=136.11 Az status=0009 Ze status=0009 06:07:38 Check angles 06:07:38 SkyScan query 06:07:39 SkyScan query done: ret=0 az=54.495<-3633 ze=114.63<-4358 Statuses=0009 0009 06:07:39 Msec=1500 True Az=54.495 Ze=114.63 Az status=0009 Ze status=0009 06:07:39 Check angles 06:07:39 SkyScan query 06:07:40 SkyScan query done: ret=0 az=40.98<-2732 ze=93.765<-5749 Statuses=0009 0009 06:07:40 Msec=2250 True Az=40.98 Ze=93.765 Az status=0009 Ze status=0009 06:07:40 Check angles 06:07:40 SkyScan query 06:07:40 SkyScan query done: ret=0 az=40.995<-2733 ze=72.795<-7147 Statuses=0008 0009 06:07:40 Msec=3000 True Az=40.995 Ze=72.795 Az status=0008 Ze status=0009 06:07:41 Check angles 06:07:41 SkyScan query 06:07:41 SkyScan query done: ret=0 az=40.995<-2733 ze=52.215<-8519 Statuses=0008 0009 06:07:41 Msec=3750 True Az=40.995 Ze=52.215 Az status=0008 Ze status=0009 06:07:41 Check angles 06:07:41 SkyScan query 06:07:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:07:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:07:42 Message to Master queued w/err=0: serial=133293 error=0 06:07:47 Received message from Master: op=Filter serial=133294 06:07:47 Color wheel filter change from 0 to 0 06:07:47 FLIGetFilterPos err=0 currentPosition=0 06:07:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:47 Filter is already there-color wheel unchanged 06:07:47 Received message from Master: op=Shutter serial=133295 06:07:47 Shutter LASER close 06:07:47 Received message from Camera: op=State serial=133297 06:07:47 GetSingleValue result=40 Value=cccccccc 06:07:47 SkyScan query 06:07:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:07:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:48 Parameters OK 06:07:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:48 Set A/D data flow result=40 06:07:48 Set A/D channel type result=40 06:07:48 Set A/D encoding result=40 06:07:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:48 Set channel filter=0.000000e+000 result=40 06:07:48 Config A/D Result=40 06:07:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:48 Get A/D filter: -9.255963e+061 result=40 06:07:48 Get A/D value=-858993460 result=40 06:07:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:48 Parameters OK 06:07:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:48 Set A/D data flow result=40 06:07:48 Set A/D channel type result=40 06:07:48 Set A/D encoding result=40 06:07:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:48 Set channel filter=0.000000e+000 result=40 06:07:48 Config A/D Result=40 06:07:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:48 Get A/D filter: -9.255963e+061 result=40 06:07:48 Get A/D value=-858993460 result=40 06:07:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:48 Aux= 06:07:48 Message to Camera, serial 133297 queued 06:08:25 Received message from Master: op=PointingHead serial=133310 06:08:25 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:08:25 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:08:25 Point started: ret=0 06:08:25 point_skyscan result=0 06:08:26 Check angles 06:08:26 SkyScan query 06:08:26 SkyScan query done: ret=0 az=63.87<-4258 ze=66.57<-7562 Statuses=0009 0008 06:08:26 Msec=0 True Az=63.87 Ze=66.57 Az status=0009 Ze status=0008 06:08:27 Check angles 06:08:27 SkyScan query 06:08:27 SkyScan query done: ret=0 az=81.405<-5427 ze=66.51<-7566 Statuses=0009 0008 06:08:27 Msec=750 True Az=81.405 Ze=66.51 Az status=0009 Ze status=0008 06:08:27 Check angles 06:08:27 SkyScan query 06:08:28 SkyScan query done: ret=0 az=98.805<-6587 ze=66.51<-7566 Statuses=0009 0008 06:08:28 Msec=1500 True Az=98.805 Ze=66.51 Az status=0009 Ze status=0008 06:08:28 Check angles 06:08:28 SkyScan query 06:08:29 SkyScan query done: ret=0 az=116.385<-7759 ze=66.51<-7566 Statuses=0009 0008 06:08:29 Msec=2250 True Az=116.385 Ze=66.51 Az status=0009 Ze status=0008 06:08:29 Check angles 06:08:29 SkyScan query 06:08:29 SkyScan query done: ret=0 az=133.8<-8920 ze=66.51<-7566 Statuses=0009 0008 06:08:29 Msec=3000 True Az=133.8 Ze=66.51 Az status=0009 Ze status=0008 06:08:30 Check angles 06:08:30 SkyScan query 06:08:30 SkyScan query done: ret=0 az=151.185<-10079 ze=66.51<-7566 Statuses=0009 0008 06:08:30 Msec=3750 True Az=151.185 Ze=66.51 Az status=0009 Ze status=0008 06:08:30 Check angles 06:08:30 SkyScan query 06:08:31 SkyScan query done: ret=0 az=158.01<-10534 ze=66.51<-7566 Statuses=0008 0008 06:08:31 Msec=4500 True Az=158.01 Ze=66.51 Az status=0008 Ze status=0008 06:08:31 Message to Master queued w/err=0: serial=133310 error=0 06:08:36 Received message from Master: op=Filter serial=133311 06:08:36 Color wheel filter change from 0 to 0 06:08:36 FLIGetFilterPos err=0 currentPosition=0 06:08:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:36 Filter is already there-color wheel unchanged 06:08:36 Received message from Master: op=Shutter serial=133312 06:08:36 Shutter LASER close 06:08:36 Received message from Camera: op=State serial=133314 06:08:36 GetSingleValue result=40 Value=cccccccc 06:08:36 SkyScan query 06:08:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 06:08:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:37 Parameters OK 06:08:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:37 Set A/D data flow result=40 06:08:37 Set A/D channel type result=40 06:08:37 Set A/D encoding result=40 06:08:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:37 Set channel filter=0.000000e+000 result=40 06:08:37 Config A/D Result=40 06:08:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:37 Get A/D filter: -9.255963e+061 result=40 06:08:37 Get A/D value=-858993460 result=40 06:08:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:37 Parameters OK 06:08:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:37 Set A/D data flow result=40 06:08:37 Set A/D channel type result=40 06:08:37 Set A/D encoding result=40 06:08:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:37 Set channel filter=0.000000e+000 result=40 06:08:37 Config A/D Result=40 06:08:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:37 Get A/D filter: -9.255963e+061 result=40 06:08:37 Get A/D value=-858993460 result=40 06:08:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:37 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:37 Aux= 06:08:37 Message to Camera, serial 133314 queued 06:09:13 Received message from Master: op=PointingHead serial=133327 06:09:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:09:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:09:14 Point started: ret=0 06:09:14 point_skyscan result=0 06:09:15 Check angles 06:09:15 SkyScan query 06:09:15 SkyScan query done: ret=0 az=134.745<-8983 ze=36.6<-9560 Statuses=0009 0009 06:09:15 Msec=0 True Az=134.745 Ze=36.6 Az status=0009 Ze status=0009 06:09:15 Check angles 06:09:15 SkyScan query 06:09:16 SkyScan query done: ret=0 az=117.255<-7817 ze=15.51<-10966 Statuses=0009 0009 06:09:16 Msec=750 True Az=117.255 Ze=15.51 Az status=0009 Ze status=0009 06:09:16 Check angles 06:09:16 SkyScan query 06:09:17 SkyScan query done: ret=0 az=99.465<-6631 ze=-5.82<-12388 Statuses=0009 0009 06:09:17 Msec=1500 True Az=99.465 Ze=-5.82 Az status=0009 Ze status=0009 06:09:17 Check angles 06:09:17 SkyScan query 06:09:17 SkyScan query done: ret=0 az=81.72<-5448 ze=-27.24<-13816 Statuses=0009 0009 06:09:17 Msec=2250 True Az=81.72 Ze=-27.24 Az status=0009 Ze status=0009 06:09:18 Check angles 06:09:18 SkyScan query 06:09:18 SkyScan query done: ret=0 az=63.84<-4256 ze=-38.58<-14572 Statuses=0009 0008 06:09:18 Msec=3000 True Az=63.84 Ze=-38.58 Az status=0009 Ze status=0008 06:09:18 Check angles 06:09:18 SkyScan query 06:09:19 SkyScan query done: ret=0 az=46.365<-3091 ze=-38.52<-14568 Statuses=0009 0008 06:09:19 Msec=3750 True Az=46.365 Ze=-38.52 Az status=0009 Ze status=0008 06:09:19 Check angles 06:09:19 SkyScan query 06:09:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:09:20 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:09:20 Message to Master queued w/err=0: serial=133327 error=0 06:09:25 Received message from Master: op=Filter serial=133328 06:09:25 Color wheel filter change from 0 to 0 06:09:25 FLIGetFilterPos err=0 currentPosition=0 06:09:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:25 Filter is already there-color wheel unchanged 06:09:25 Received message from Master: op=Shutter serial=133329 06:09:25 Shutter LASER close 06:09:25 Received message from Camera: op=State serial=133331 06:09:25 GetSingleValue result=40 Value=cccccccc 06:09:25 SkyScan query 06:09:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:09:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:26 Parameters OK 06:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:26 Set A/D data flow result=40 06:09:26 Set A/D channel type result=40 06:09:26 Set A/D encoding result=40 06:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:26 Set channel filter=0.000000e+000 result=40 06:09:26 Config A/D Result=40 06:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:26 Get A/D filter: -9.255963e+061 result=40 06:09:26 Get A/D value=-858993460 result=40 06:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:26 Parameters OK 06:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:26 Set A/D data flow result=40 06:09:26 Set A/D channel type result=40 06:09:26 Set A/D encoding result=40 06:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:26 Set channel filter=0.000000e+000 result=40 06:09:26 Config A/D Result=40 06:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:26 Get A/D filter: -9.255963e+061 result=40 06:09:26 Get A/D value=-858993460 result=40 06:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:26 Aux= 06:09:26 Message to Camera, serial 133331 queued 06:10:01 Received message from Master: op=PointingHead serial=133343 06:10:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:10:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:10:02 Point started: ret=0 06:10:02 point_skyscan result=0 06:10:03 Check angles 06:10:03 SkyScan query 06:10:03 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.685<-16579 Statuses=0009 0009 06:10:03 Msec=0 True Az=64.245 Ze=-68.685 Az status=0009 Ze status=0009 06:10:03 Check angles 06:10:03 SkyScan query 06:10:04 SkyScan query done: ret=0 az=82.125<-5475 ze=-90.03<-18002 Statuses=0009 0009 06:10:04 Msec=750 True Az=82.125 Ze=-90.03 Az status=0009 Ze status=0009 06:10:04 Check angles 06:10:04 SkyScan query 06:10:05 SkyScan query done: ret=0 az=99.51<-6634 ze=-111<-19400 Statuses=0009 0009 06:10:05 Msec=1500 True Az=99.51 Ze=-111 Az status=0009 Ze status=0009 06:10:05 Check angles 06:10:05 SkyScan query 06:10:05 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.91<-20794 Statuses=0009 0009 06:10:05 Msec=2250 True Az=117.09 Ze=-131.91 Az status=0009 Ze status=0009 06:10:06 Check angles 06:10:06 SkyScan query 06:10:06 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 06:10:06 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 06:10:06 Check angles 06:10:06 SkyScan query 06:10:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 06:10:07 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 06:10:07 Message to Master queued w/err=0: serial=133343 error=0 06:10:12 Received message from Master: op=Filter serial=133344 06:10:12 Color wheel filter change from 0 to 0 06:10:12 FLIGetFilterPos err=0 currentPosition=0 06:10:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:12 Filter is already there-color wheel unchanged 06:10:12 Received message from Master: op=Shutter serial=133345 06:10:12 Shutter LASER close 06:10:12 Received message from Camera: op=State serial=133347 06:10:12 GetSingleValue result=40 Value=cccccccc 06:10:12 SkyScan query 06:10:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:10:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:13 Parameters OK 06:10:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:13 Set A/D data flow result=40 06:10:13 Set A/D channel type result=40 06:10:13 Set A/D encoding result=40 06:10:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:13 Set channel filter=0.000000e+000 result=40 06:10:13 Config A/D Result=40 06:10:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:13 Get A/D filter: -9.255963e+061 result=40 06:10:13 Get A/D value=-858993460 result=40 06:10:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:13 Parameters OK 06:10:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:13 Set A/D data flow result=40 06:10:13 Set A/D channel type result=40 06:10:13 Set A/D encoding result=40 06:10:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:13 Set channel filter=0.000000e+000 result=40 06:10:13 Config A/D Result=40 06:10:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:13 Get A/D filter: -9.255963e+061 result=40 06:10:13 Get A/D value=-858993460 result=40 06:10:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:13 Aux= 06:10:13 Message to Camera, serial 133347 queued 06:10:50 Received message from Master: op=PointingHead serial=133360 06:10:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:10:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:10:50 Point started: ret=0 06:10:50 point_skyscan result=0 06:10:51 Check angles 06:10:51 SkyScan query 06:10:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0009 0009 06:10:51 Msec=0 True Az=112.995 Ze=-171.105 Az status=0009 Ze status=0009 06:10:51 Check angles 06:10:51 SkyScan query 06:10:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:10:52 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:10:52 Message to Master queued w/err=0: serial=133360 error=0 06:10:57 Received message from Master: op=Filter serial=133361 06:10:57 Color wheel filter change from 0 to 0 06:10:57 FLIGetFilterPos err=0 currentPosition=0 06:10:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:57 Filter is already there-color wheel unchanged 06:10:57 Received message from Master: op=Shutter serial=133362 06:10:57 Shutter LASER open 06:10:57 Received message from Camera: op=State serial=133364 06:10:57 GetSingleValue result=40 Value=cccccccc 06:10:57 SkyScan query 06:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:10:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:58 Parameters OK 06:10:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:58 Set A/D data flow result=40 06:10:58 Set A/D channel type result=40 06:10:58 Set A/D encoding result=40 06:10:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:58 Set channel filter=0.000000e+000 result=40 06:10:58 Config A/D Result=40 06:10:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:58 Get A/D filter: -9.255963e+061 result=40 06:10:58 Get A/D value=-858993460 result=40 06:10:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:58 Parameters OK 06:10:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:58 Set A/D data flow result=40 06:10:58 Set A/D channel type result=40 06:10:58 Set A/D encoding result=40 06:10:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:58 Set channel filter=0.000000e+000 result=40 06:10:58 Config A/D Result=40 06:10:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:58 Get A/D filter: -9.255963e+061 result=40 06:10:58 Get A/D value=-858993460 result=40 06:10:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:58 Aux= 06:10:58 Message to Camera, serial 133364 queued 06:11:06 Received message from Master: op=Shutter serial=133374 06:11:06 Shutter LASER close 06:11:07 Received message from Master: op=PointingHead serial=133378 06:11:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:11:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:11:07 Point started: ret=0 06:11:07 point_skyscan result=0 06:11:08 Check angles 06:11:08 SkyScan query 06:11:09 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.46<-21564 Statuses=0009 0009 06:11:09 Msec=0 True Az=135.81 Ze=-143.46 Az status=0009 Ze status=0009 06:11:09 Check angles 06:11:09 SkyScan query 06:11:09 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.475<-20165 Statuses=0009 0009 06:11:09 Msec=750 True Az=153.36 Ze=-122.475 Az status=0009 Ze status=0009 06:11:09 Check angles 06:11:09 SkyScan query 06:11:10 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.1<-18740 Statuses=0009 0009 06:11:10 Msec=1500 True Az=171.225 Ze=-101.1 Az status=0009 Ze status=0009 06:11:10 Check angles 06:11:10 SkyScan query 06:11:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.695<-17313 Statuses=0008 0009 06:11:11 Msec=2250 True Az=176.01 Ze=-79.695 Az status=0008 Ze status=0009 06:11:11 Check angles 06:11:11 SkyScan query 06:11:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.725<-15915 Statuses=0008 0009 06:11:12 Msec=3000 True Az=176.01 Ze=-58.725 Az status=0008 Ze status=0009 06:11:12 Check angles 06:11:12 SkyScan query 06:11:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:11:12 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:11:12 Message to Master queued w/err=0: serial=133378 error=0 06:11:17 Received message from Master: op=Filter serial=133379 06:11:17 Color wheel filter change from 0 to 0 06:11:17 FLIGetFilterPos err=0 currentPosition=0 06:11:17 FLIGetStepsRemaining err=0 RemainingSteps=0 06:11:17 Filter is already there-color wheel unchanged 06:11:17 Received message from Master: op=Shutter serial=133380 06:11:17 Shutter LASER close 06:11:18 Received message from Camera: op=State serial=133382 06:11:18 GetSingleValue result=40 Value=cccccccc 06:11:18 SkyScan query 06:11:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:11:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:18 Parameters OK 06:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:18 Set A/D data flow result=40 06:11:18 Set A/D channel type result=40 06:11:18 Set A/D encoding result=40 06:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:18 Set channel filter=0.000000e+000 result=40 06:11:18 Config A/D Result=40 06:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:18 Get A/D filter: -9.255963e+061 result=40 06:11:18 Get A/D value=-858993460 result=40 06:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:18 Parameters OK 06:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:18 Set A/D data flow result=40 06:11:18 Set A/D channel type result=40 06:11:18 Set A/D encoding result=40 06:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:18 Set channel filter=0.000000e+000 result=40 06:11:18 Config A/D Result=40 06:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:18 Get A/D filter: -9.255963e+061 result=40 06:11:18 Get A/D value=-858993460 result=40 06:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:11:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:11:18 Aux= 06:11:18 Message to Camera, serial 133382 queued 06:11:55 Received message from Master: op=PointingHead serial=133395 06:11:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:11:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:11:55 Point started: ret=0 06:11:55 point_skyscan result=0 06:11:56 Check angles 06:11:56 SkyScan query 06:11:57 SkyScan query done: ret=0 az=153.165<-10211 ze=-22.005<-13467 Statuses=0009 0009 06:11:57 Msec=0 True Az=153.165 Ze=-22.005 Az status=0009 Ze status=0009 06:11:57 Check angles 06:11:57 SkyScan query 06:11:57 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.005<-12067 Statuses=0009 0009 06:11:57 Msec=750 True Az=135.78 Ze=-1.005 Az status=0009 Ze status=0009 06:11:58 Check angles 06:11:58 SkyScan query 06:11:58 SkyScan query done: ret=0 az=117.78<-7852 ze=20.37<-10642 Statuses=0009 0009 06:11:58 Msec=1500 True Az=117.78 Ze=20.37 Az status=0009 Ze status=0009 06:11:58 Check angles 06:11:58 SkyScan query 06:11:59 SkyScan query done: ret=0 az=100.41<-6694 ze=41.34<-9244 Statuses=0009 0009 06:11:59 Msec=2250 True Az=100.41 Ze=41.34 Az status=0009 Ze status=0009 06:11:59 Check angles 06:11:59 SkyScan query 06:12:00 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 06:12:00 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 06:12:00 Check angles 06:12:00 SkyScan query 06:12:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:12:00 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:12:00 Message to Master queued w/err=0: serial=133395 error=0 06:12:05 Received message from Master: op=Filter serial=133396 06:12:05 Color wheel filter change from 0 to 0 06:12:05 FLIGetFilterPos err=0 currentPosition=0 06:12:05 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:05 Filter is already there-color wheel unchanged 06:12:06 Received message from Master: op=Shutter serial=133397 06:12:06 Shutter LASER close 06:12:06 Received message from Camera: op=State serial=133399 06:12:06 GetSingleValue result=40 Value=cccccccc 06:12:06 SkyScan query 06:12:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:12:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:06 Parameters OK 06:12:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:06 Set A/D data flow result=40 06:12:06 Set A/D channel type result=40 06:12:06 Set A/D encoding result=40 06:12:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:06 Set channel filter=0.000000e+000 result=40 06:12:06 Config A/D Result=40 06:12:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:06 Get A/D filter: -9.255963e+061 result=40 06:12:06 Get A/D value=-858993460 result=40 06:12:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:06 Parameters OK 06:12:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:06 Set A/D data flow result=40 06:12:06 Set A/D channel type result=40 06:12:06 Set A/D encoding result=40 06:12:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:06 Set channel filter=0.000000e+000 result=40 06:12:06 Config A/D Result=40 06:12:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:06 Get A/D filter: -9.255963e+061 result=40 06:12:06 Get A/D value=-858993460 result=40 06:12:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:06 Aux= 06:12:06 Message to Camera, serial 133399 queued 06:12:43 Received message from Master: op=PointingHead serial=133412 06:12:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:12:43 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:12:43 Point started: ret=0 06:12:43 point_skyscan result=0 06:12:44 Check angles 06:12:44 SkyScan query 06:12:45 SkyScan query done: ret=0 az=108.75<-7250 ze=38.49<-9434 Statuses=0009 0008 06:12:45 Msec=0 True Az=108.75 Ze=38.49 Az status=0009 Ze status=0008 06:12:45 Check angles 06:12:45 SkyScan query 06:12:46 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 06:12:46 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 06:12:46 Check angles 06:12:46 SkyScan query 06:12:46 SkyScan query done: ret=0 az=143.76<-9584 ze=38.505<-9433 Statuses=0009 0008 06:12:46 Msec=1500 True Az=143.76 Ze=38.505 Az status=0009 Ze status=0008 06:12:46 Check angles 06:12:46 SkyScan query 06:12:47 SkyScan query done: ret=0 az=161.1<-10740 ze=38.505<-9433 Statuses=0009 0008 06:12:47 Msec=2250 True Az=161.1 Ze=38.505 Az status=0009 Ze status=0008 06:12:47 Check angles 06:12:47 SkyScan query 06:12:48 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:12:48 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:12:48 Check angles 06:12:48 SkyScan query 06:12:49 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:12:49 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:12:49 Message to Master queued w/err=0: serial=133412 error=0 06:12:54 Received message from Master: op=Filter serial=133413 06:12:54 Color wheel filter change from 0 to 0 06:12:54 FLIGetFilterPos err=0 currentPosition=0 06:12:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:54 Filter is already there-color wheel unchanged 06:12:54 Received message from Master: op=Shutter serial=133414 06:12:54 Shutter LASER close 06:12:54 Received message from Camera: op=State serial=133416 06:12:54 GetSingleValue result=40 Value=cccccccc 06:12:54 SkyScan query 06:12:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:12:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:54 Parameters OK 06:12:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:54 Set A/D data flow result=40 06:12:54 Set A/D channel type result=40 06:12:54 Set A/D encoding result=40 06:12:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:54 Set channel filter=0.000000e+000 result=40 06:12:54 Config A/D Result=40 06:12:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:54 Get A/D filter: -9.255963e+061 result=40 06:12:54 Get A/D value=-858993460 result=40 06:12:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:54 Parameters OK 06:12:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:54 Set A/D data flow result=40 06:12:54 Set A/D channel type result=40 06:12:54 Set A/D encoding result=40 06:12:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:54 Set channel filter=0.000000e+000 result=40 06:12:54 Config A/D Result=40 06:12:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:54 Get A/D filter: -9.255963e+061 result=40 06:12:54 Get A/D value=-858993460 result=40 06:12:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:54 Aux= 06:12:54 Message to Camera, serial 133416 queued 06:13:31 Received message from Master: op=PointingHead serial=133429 06:13:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:13:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:13:31 Point started: ret=0 06:13:31 point_skyscan result=0 06:13:32 Check angles 06:13:32 SkyScan query 06:13:33 SkyScan query done: ret=0 az=153.225<-10215 ze=8.985<-11401 Statuses=0009 0009 06:13:33 Msec=0 True Az=153.225 Ze=8.985 Az status=0009 Ze status=0009 06:13:33 Check angles 06:13:33 SkyScan query 06:13:34 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.42<-12828 Statuses=0009 0009 06:13:34 Msec=750 True Az=135.375 Ze=-12.42 Az status=0009 Ze status=0009 06:13:34 Check angles 06:13:34 SkyScan query 06:13:34 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.39<-14226 Statuses=0009 0009 06:13:34 Msec=1500 True Az=117.795 Ze=-33.39 Az status=0009 Ze status=0009 06:13:34 Check angles 06:13:34 SkyScan query 06:13:35 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.54<-15436 Statuses=0009 0009 06:13:35 Msec=2250 True Az=100.425 Ze=-51.54 Az status=0009 Ze status=0009 06:13:35 Check angles 06:13:35 SkyScan query 06:13:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 06:13:36 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 06:13:36 Check angles 06:13:36 SkyScan query 06:13:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:13:37 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:13:37 Message to Master queued w/err=0: serial=133429 error=0 06:13:42 Received message from Master: op=Filter serial=133430 06:13:42 Color wheel filter change from 0 to 0 06:13:42 FLIGetFilterPos err=0 currentPosition=0 06:13:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:42 Filter is already there-color wheel unchanged 06:13:42 Received message from Master: op=Shutter serial=133431 06:13:42 Shutter LASER close 06:13:42 Received message from Camera: op=State serial=133433 06:13:42 GetSingleValue result=40 Value=cccccccc 06:13:42 SkyScan query 06:13:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:13:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:42 Parameters OK 06:13:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:42 Set A/D data flow result=40 06:13:42 Set A/D channel type result=40 06:13:42 Set A/D encoding result=40 06:13:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:42 Set channel filter=0.000000e+000 result=40 06:13:42 Config A/D Result=40 06:13:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:42 Get A/D filter: -9.255963e+061 result=40 06:13:42 Get A/D value=-858993460 result=40 06:13:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:42 Parameters OK 06:13:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:42 Set A/D data flow result=40 06:13:42 Set A/D channel type result=40 06:13:42 Set A/D encoding result=40 06:13:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:42 Set channel filter=0.000000e+000 result=40 06:13:42 Config A/D Result=40 06:13:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:42 Get A/D filter: -9.255963e+061 result=40 06:13:42 Get A/D value=-858993460 result=40 06:13:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:42 Aux= 06:13:42 Message to Camera, serial 133433 queued 06:14:18 Received message from Master: op=PointingHead serial=133445 06:14:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:14:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:14:19 Point started: ret=0 06:14:19 point_skyscan result=0 06:14:19 Check angles 06:14:19 SkyScan query 06:14:20 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.84<-17456 Statuses=0009 0009 06:14:20 Msec=0 True Az=109.395 Ze=-81.84 Az status=0009 Ze status=0009 06:14:20 Check angles 06:14:20 SkyScan query 06:14:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.2<-18880 Statuses=0008 0009 06:14:21 Msec=750 True Az=112.995 Ze=-103.2 Az status=0008 Ze status=0009 06:14:21 Check angles 06:14:21 SkyScan query 06:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.17<-20278 Statuses=0008 0009 06:14:22 Msec=1500 True Az=112.995 Ze=-124.17 Az status=0008 Ze status=0009 06:14:22 Check angles 06:14:22 SkyScan query 06:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.11<-21674 Statuses=0008 0009 06:14:22 Msec=2250 True Az=112.995 Ze=-145.11 Az status=0008 Ze status=0009 06:14:22 Check angles 06:14:22 SkyScan query 06:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.05<-23070 Statuses=0008 0009 06:14:23 Msec=3000 True Az=112.995 Ze=-166.05 Az status=0008 Ze status=0009 06:14:23 Check angles 06:14:23 SkyScan query 06:14:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:14:24 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:14:24 Message to Master queued w/err=0: serial=133445 error=0 06:14:29 Received message from Master: op=Filter serial=133446 06:14:29 Color wheel filter change from 0 to 0 06:14:29 FLIGetFilterPos err=0 currentPosition=0 06:14:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:29 Filter is already there-color wheel unchanged 06:14:29 Received message from Master: op=Shutter serial=133447 06:14:29 Shutter LASER open 06:14:29 Received message from Camera: op=State serial=133449 06:14:29 GetSingleValue result=40 Value=cccccccc 06:14:29 SkyScan query 06:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:14:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:30 Parameters OK 06:14:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:30 Set A/D data flow result=40 06:14:30 Set A/D channel type result=40 06:14:30 Set A/D encoding result=40 06:14:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:30 Set channel filter=0.000000e+000 result=40 06:14:30 Config A/D Result=40 06:14:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:30 Get A/D filter: -9.255963e+061 result=40 06:14:30 Get A/D value=-858993460 result=40 06:14:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:30 Parameters OK 06:14:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:30 Set A/D data flow result=40 06:14:30 Set A/D channel type result=40 06:14:30 Set A/D encoding result=40 06:14:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:30 Set channel filter=0.000000e+000 result=40 06:14:30 Config A/D Result=40 06:14:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:30 Get A/D filter: -9.255963e+061 result=40 06:14:30 Get A/D value=-858993460 result=40 06:14:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:30 Aux= 06:14:30 Message to Camera, serial 133449 queued 06:14:38 Received message from Master: op=Shutter serial=133459 06:14:38 Shutter LASER close 06:14:39 Received message from Master: op=PointingHead serial=133463 06:14:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:14:39 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:14:39 Point started: ret=0 06:14:39 point_skyscan result=0 06:14:40 Check angles 06:14:40 SkyScan query 06:14:40 SkyScan query done: ret=0 az=89.79<-5986 ze=157.215<-1519 Statuses=0009 0009 06:14:40 Msec=0 True Az=89.79 Ze=157.215 Az status=0009 Ze status=0009 06:14:40 Check angles 06:14:40 SkyScan query 06:14:41 SkyScan query done: ret=0 az=72.255<-4817 ze=136.23<-2918 Statuses=0009 0009 06:14:41 Msec=750 True Az=72.255 Ze=136.23 Az status=0009 Ze status=0009 06:14:41 Check angles 06:14:41 SkyScan query 06:14:42 SkyScan query done: ret=0 az=54.84<-3656 ze=115.29<-4314 Statuses=0009 0009 06:14:42 Msec=1500 True Az=54.84 Ze=115.29 Az status=0009 Ze status=0009 06:14:42 Check angles 06:14:42 SkyScan query 06:14:43 SkyScan query done: ret=0 az=41.025<-2735 ze=94.305<-5713 Statuses=0009 0009 06:14:43 Msec=2250 True Az=41.025 Ze=94.305 Az status=0009 Ze status=0009 06:14:43 Check angles 06:14:43 SkyScan query 06:14:43 SkyScan query done: ret=0 az=40.995<-2733 ze=73.365<-7109 Statuses=0008 0009 06:14:43 Msec=3000 True Az=40.995 Ze=73.365 Az status=0008 Ze status=0009 06:14:43 Check angles 06:14:43 SkyScan query 06:14:44 SkyScan query done: ret=0 az=40.995<-2733 ze=52.8<-8480 Statuses=0008 0009 06:14:44 Msec=3750 True Az=40.995 Ze=52.8 Az status=0008 Ze status=0009 06:14:44 Check angles 06:14:44 SkyScan query 06:14:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:14:45 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:14:45 Message to Master queued w/err=0: serial=133463 error=0 06:14:50 Received message from Master: op=Filter serial=133464 06:14:50 Color wheel filter change from 0 to 0 06:14:50 FLIGetFilterPos err=0 currentPosition=0 06:14:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:50 Filter is already there-color wheel unchanged 06:14:50 Received message from Master: op=Shutter serial=133465 06:14:50 Shutter LASER close 06:14:50 Received message from Camera: op=State serial=133467 06:14:50 GetSingleValue result=40 Value=cccccccc 06:14:50 SkyScan query 06:14:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:14:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:51 Parameters OK 06:14:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:51 Set A/D data flow result=40 06:14:51 Set A/D channel type result=40 06:14:51 Set A/D encoding result=40 06:14:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:51 Set channel filter=0.000000e+000 result=40 06:14:51 Config A/D Result=40 06:14:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:51 Get A/D filter: -9.255963e+061 result=40 06:14:51 Get A/D value=-858993460 result=40 06:14:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:51 Parameters OK 06:14:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:51 Set A/D data flow result=40 06:14:51 Set A/D channel type result=40 06:14:51 Set A/D encoding result=40 06:14:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:51 Set channel filter=0.000000e+000 result=40 06:14:51 Config A/D Result=40 06:14:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:51 Get A/D filter: -9.255963e+061 result=40 06:14:51 Get A/D value=-858993460 result=40 06:14:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:51 Aux= 06:14:51 Message to Camera, serial 133467 queued 06:15:27 Received message from Master: op=Identify serial=133476 06:15:27 Received message from Master: op=PointingHead serial=133483 06:15:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:15:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:15:28 Point started: ret=0 06:15:28 point_skyscan result=0 06:15:29 Check angles 06:15:29 SkyScan query 06:15:29 SkyScan query done: ret=0 az=63.915<-4261 ze=66.555<-7563 Statuses=0009 0008 06:15:29 Msec=0 True Az=63.915 Ze=66.555 Az status=0009 Ze status=0008 06:15:29 Check angles 06:15:29 SkyScan query 06:15:30 SkyScan query done: ret=0 az=81.72<-5448 ze=66.495<-7567 Statuses=0009 0008 06:15:30 Msec=750 True Az=81.72 Ze=66.495 Az status=0009 Ze status=0008 06:15:30 Check angles 06:15:30 SkyScan query 06:15:31 SkyScan query done: ret=0 az=99.195<-6613 ze=66.495<-7567 Statuses=0009 0008 06:15:31 Msec=1500 True Az=99.195 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-14 06:15:31] 06:15:31 Check angles 06:15:31 SkyScan query 06:15:32 SkyScan query done: ret=0 az=118.485<-7899 ze=66.495<-7567 Statuses=0009 0008 06:15:32 Msec=2250 True Az=118.485 Ze=66.495 Az status=0009 Ze status=0008 06:15:32 Check angles 06:15:32 SkyScan query 06:15:32 SkyScan query done: ret=0 az=134.745<-8983 ze=66.495<-7567 Statuses=0009 0008 06:15:32 Msec=3000 True Az=134.745 Ze=66.495 Az status=0009 Ze status=0008 06:15:32 Check angles 06:15:32 SkyScan query 06:15:33 SkyScan query done: ret=0 az=151.83<-10122 ze=66.495<-7567 Statuses=0009 0008 06:15:33 Msec=3750 True Az=151.83 Ze=66.495 Az status=0009 Ze status=0008 06:15:33 Check angles 06:15:33 SkyScan query 06:15:34 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 06:15:34 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 06:15:34 Message to Master queued w/err=0: serial=133483 error=0 06:15:39 Received message from Master: op=Filter serial=133484 06:15:39 Color wheel filter change from 0 to 0 06:15:39 FLIGetFilterPos err=0 currentPosition=0 06:15:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:39 Filter is already there-color wheel unchanged 06:15:39 Received message from Master: op=Shutter serial=133485 06:15:39 Shutter LASER close 06:15:39 Received message from Camera: op=State serial=133487 06:15:39 GetSingleValue result=40 Value=cccccccc 06:15:39 SkyScan query 06:15:40 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:15:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:40 Parameters OK 06:15:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:40 Set A/D data flow result=40 06:15:40 Set A/D channel type result=40 06:15:40 Set A/D encoding result=40 06:15:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:40 Set channel filter=0.000000e+000 result=40 06:15:40 Config A/D Result=40 06:15:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:40 Get A/D filter: -9.255963e+061 result=40 06:15:40 Get A/D value=-858993460 result=40 06:15:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:40 Parameters OK 06:15:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:40 Set A/D data flow result=40 06:15:40 Set A/D channel type result=40 06:15:40 Set A/D encoding result=40 06:15:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:40 Set channel filter=0.000000e+000 result=40 06:15:40 Config A/D Result=40 06:15:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:40 Get A/D filter: -9.255963e+061 result=40 06:15:40 Get A/D value=-858993460 result=40 06:15:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:40 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:40 Aux= 06:15:40 Message to Camera, serial 133487 queued [UTC 2018-12-14 06:15:52] 06:16:16 Received message from Master: op=PointingHead serial=133500 06:16:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:16:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:16:17 Point started: ret=0 06:16:17 point_skyscan result=0 06:16:17 Check angles 06:16:17 SkyScan query 06:16:18 SkyScan query done: ret=0 az=134.985<-8999 ze=36.735<-9551 Statuses=0009 0009 06:16:18 Msec=0 True Az=134.985 Ze=36.735 Az status=0009 Ze status=0009 06:16:18 Check angles 06:16:18 SkyScan query 06:16:19 SkyScan query done: ret=0 az=117.51<-7834 ze=15.825<-10945 Statuses=0009 0009 06:16:19 Msec=750 True Az=117.51 Ze=15.825 Az status=0009 Ze status=0009 06:16:19 Check angles 06:16:19 SkyScan query 06:16:20 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.16<-12344 Statuses=0009 0009 06:16:20 Msec=1500 True Az=100.2 Ze=-5.16 Az status=0009 Ze status=0009 06:16:20 Check angles 06:16:20 SkyScan query 06:16:20 SkyScan query done: ret=0 az=82.65<-5510 ze=-26.085<-13739 Statuses=0009 0009 06:16:20 Msec=2250 True Az=82.65 Ze=-26.085 Az status=0009 Ze status=0009 06:16:20 Check angles 06:16:20 SkyScan query 06:16:21 SkyScan query done: ret=0 az=65.175<-4345 ze=-38.58<-14572 Statuses=0009 0008 06:16:21 Msec=3000 True Az=65.175 Ze=-38.58 Az status=0009 Ze status=0008 06:16:21 Check angles 06:16:21 SkyScan query 06:16:22 SkyScan query done: ret=0 az=47.73<-3182 ze=-38.52<-14568 Statuses=0009 0008 06:16:22 Msec=3750 True Az=47.73 Ze=-38.52 Az status=0009 Ze status=0008 06:16:22 Check angles 06:16:22 SkyScan query 06:16:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:16:23 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:16:23 Message to Master queued w/err=0: serial=133500 error=0 06:16:28 Received message from Master: op=Filter serial=133501 06:16:28 Color wheel filter change from 0 to 0 06:16:28 FLIGetFilterPos err=0 currentPosition=0 06:16:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:28 Filter is already there-color wheel unchanged 06:16:28 Received message from Master: op=Shutter serial=133502 06:16:28 Shutter LASER close 06:16:28 Received message from Camera: op=State serial=133504 06:16:28 GetSingleValue result=40 Value=cccccccc 06:16:28 SkyScan query 06:16:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:16:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:28 Parameters OK 06:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:28 Set A/D data flow result=40 06:16:28 Set A/D channel type result=40 06:16:28 Set A/D encoding result=40 06:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:28 Set channel filter=0.000000e+000 result=40 06:16:28 Config A/D Result=40 06:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:28 Get A/D filter: -9.255963e+061 result=40 06:16:28 Get A/D value=-858993460 result=40 06:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:28 Parameters OK 06:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:28 Set A/D data flow result=40 06:16:28 Set A/D channel type result=40 06:16:28 Set A/D encoding result=40 06:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:28 Set channel filter=0.000000e+000 result=40 06:16:28 Config A/D Result=40 06:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:28 Get A/D filter: -9.255963e+061 result=40 06:16:28 Get A/D value=-858993460 result=40 06:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:28 Aux= 06:16:28 Message to Camera, serial 133504 queued 06:17:05 Received message from Master: op=PointingHead serial=133517 06:17:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:17:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:17:05 Point started: ret=0 06:17:05 point_skyscan result=0 06:17:06 Check angles 06:17:06 SkyScan query 06:17:07 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.085<-16539 Statuses=0009 0009 06:17:07 Msec=0 True Az=63.84 Ze=-68.085 Az status=0009 Ze status=0009 06:17:07 Check angles 06:17:07 SkyScan query 06:17:08 SkyScan query done: ret=0 az=81.27<-5418 ze=-89.07<-17938 Statuses=0009 0009 06:17:08 Msec=750 True Az=81.27 Ze=-89.07 Az status=0009 Ze status=0009 06:17:08 Check angles 06:17:08 SkyScan query 06:17:08 SkyScan query done: ret=0 az=99.09<-6606 ze=-110.475<-19365 Statuses=0009 0009 06:17:08 Msec=1500 True Az=99.09 Ze=-110.475 Az status=0009 Ze status=0009 06:17:08 Check angles 06:17:08 SkyScan query 06:17:09 SkyScan query done: ret=0 az=116.67<-7778 ze=-131.385<-20759 Statuses=0009 0009 06:17:09 Msec=2250 True Az=116.67 Ze=-131.385 Az status=0009 Ze status=0009 06:17:09 Check angles 06:17:09 SkyScan query 06:17:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 06:17:10 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 06:17:10 Check angles 06:17:10 SkyScan query 06:17:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 06:17:11 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 06:17:11 Message to Master queued w/err=0: serial=133517 error=0 06:17:16 Received message from Master: op=Filter serial=133518 06:17:16 Color wheel filter change from 0 to 0 06:17:16 FLIGetFilterPos err=0 currentPosition=0 06:17:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:16 Filter is already there-color wheel unchanged 06:17:16 Received message from Master: op=Shutter serial=133519 06:17:16 Shutter LASER close 06:17:16 Received message from Camera: op=State serial=133521 06:17:16 GetSingleValue result=40 Value=cccccccc 06:17:16 SkyScan query 06:17:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:17:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:16 Parameters OK 06:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:16 Set A/D data flow result=40 06:17:16 Set A/D channel type result=40 06:17:16 Set A/D encoding result=40 06:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:16 Set channel filter=0.000000e+000 result=40 06:17:16 Config A/D Result=40 06:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:16 Get A/D filter: -9.255963e+061 result=40 06:17:16 Get A/D value=-858993460 result=40 06:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:16 Parameters OK 06:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:16 Set A/D data flow result=40 06:17:16 Set A/D channel type result=40 06:17:16 Set A/D encoding result=40 06:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:16 Set channel filter=0.000000e+000 result=40 06:17:16 Config A/D Result=40 06:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:16 Get A/D filter: -9.255963e+061 result=40 06:17:16 Get A/D value=-858993460 result=40 06:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:16 Aux= 06:17:16 Message to Camera, serial 133521 queued 06:17:53 Received message from Master: op=PointingHead serial=133534 06:17:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:17:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:17:54 Point started: ret=0 06:17:54 point_skyscan result=0 06:17:54 Check angles 06:17:54 SkyScan query 06:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.315<-23421 Statuses=0009 0009 06:17:55 Msec=0 True Az=112.995 Ze=-171.315 Az status=0009 Ze status=0009 06:17:55 Check angles 06:17:55 SkyScan query 06:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:17:56 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:17:56 Message to Master queued w/err=0: serial=133534 error=0 06:18:01 Received message from Master: op=Filter serial=133535 06:18:01 Color wheel filter change from 0 to 0 06:18:01 FLIGetFilterPos err=0 currentPosition=0 06:18:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:01 Filter is already there-color wheel unchanged 06:18:01 Received message from Master: op=Shutter serial=133536 06:18:01 Shutter LASER open 06:18:01 Received message from Camera: op=State serial=133538 06:18:01 GetSingleValue result=40 Value=cccccccc 06:18:01 SkyScan query 06:18:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:18:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:02 Parameters OK 06:18:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:02 Set A/D data flow result=40 06:18:02 Set A/D channel type result=40 06:18:02 Set A/D encoding result=40 06:18:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:02 Set channel filter=0.000000e+000 result=40 06:18:02 Config A/D Result=40 06:18:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:02 Get A/D filter: -9.255963e+061 result=40 06:18:02 Get A/D value=-858993460 result=40 06:18:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:02 Parameters OK 06:18:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:02 Set A/D data flow result=40 06:18:02 Set A/D channel type result=40 06:18:02 Set A/D encoding result=40 06:18:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:02 Set channel filter=0.000000e+000 result=40 06:18:02 Config A/D Result=40 06:18:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:02 Get A/D filter: -9.255963e+061 result=40 06:18:02 Get A/D value=-858993460 result=40 06:18:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:02 Aux= 06:18:02 Message to Camera, serial 133538 queued 06:18:10 Received message from Master: op=Shutter serial=133548 06:18:10 Shutter LASER close 06:18:11 Received message from Master: op=PointingHead serial=133552 06:18:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:18:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:18:11 Point started: ret=0 06:18:11 point_skyscan result=0 06:18:12 Check angles 06:18:12 SkyScan query 06:18:12 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.43<-21562 Statuses=0009 0009 06:18:12 Msec=0 True Az=135.96 Ze=-143.43 Az status=0009 Ze status=0009 06:18:12 Check angles 06:18:12 SkyScan query 06:18:13 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.43<-20162 Statuses=0009 0009 06:18:13 Msec=750 True Az=153.375 Ze=-122.43 Az status=0009 Ze status=0009 06:18:13 Check angles 06:18:13 SkyScan query 06:18:14 SkyScan query done: ret=0 az=170.895<-11393 ze=-101.565<-18771 Statuses=0009 0009 06:18:14 Msec=1500 True Az=170.895 Ze=-101.565 Az status=0009 Ze status=0009 06:18:14 Check angles 06:18:14 SkyScan query 06:18:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.16<-17344 Statuses=0008 0009 06:18:14 Msec=2250 True Az=176.01 Ze=-80.16 Az status=0008 Ze status=0009 06:18:15 Check angles 06:18:15 SkyScan query 06:18:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.145<-15943 Statuses=0008 0009 06:18:15 Msec=3000 True Az=176.01 Ze=-59.145 Az status=0008 Ze status=0009 06:18:15 Check angles 06:18:15 SkyScan query 06:18:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:18:16 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:18:16 Message to Master queued w/err=0: serial=133552 error=0 06:18:21 Received message from Master: op=Filter serial=133553 06:18:21 Color wheel filter change from 0 to 0 06:18:21 FLIGetFilterPos err=0 currentPosition=0 06:18:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:21 Filter is already there-color wheel unchanged 06:18:21 Received message from Master: op=Shutter serial=133554 06:18:21 Shutter LASER close 06:18:21 Received message from Camera: op=State serial=133556 06:18:21 GetSingleValue result=40 Value=cccccccc 06:18:21 SkyScan query 06:18:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:18:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:22 Parameters OK 06:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:22 Set A/D data flow result=40 06:18:22 Set A/D channel type result=40 06:18:22 Set A/D encoding result=40 06:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:22 Set channel filter=0.000000e+000 result=40 06:18:22 Config A/D Result=40 06:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:22 Get A/D filter: -9.255963e+061 result=40 06:18:22 Get A/D value=-858993460 result=40 06:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:22 Parameters OK 06:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:22 Set A/D data flow result=40 06:18:22 Set A/D channel type result=40 06:18:22 Set A/D encoding result=40 06:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:22 Set channel filter=0.000000e+000 result=40 06:18:22 Config A/D Result=40 06:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:22 Get A/D filter: -9.255963e+061 result=40 06:18:22 Get A/D value=-858993460 result=40 06:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:22 Aux= 06:18:22 Message to Camera, serial 133556 queued 06:18:58 Received message from Master: op=PointingHead serial=133568 06:18:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:18:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:18:58 Point started: ret=0 06:18:58 point_skyscan result=0 06:18:59 Check angles 06:18:59 SkyScan query 06:18:59 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.375<-13425 Statuses=0009 0009 06:18:59 Msec=0 True Az=152.745 Ze=-21.375 Az status=0009 Ze status=0009 06:19:00 Check angles 06:19:00 SkyScan query 06:19:00 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.435<-12029 Statuses=0009 0009 06:19:00 Msec=750 True Az=135.27 Ze=-0.435 Az status=0009 Ze status=0009 06:19:00 Check angles 06:19:00 SkyScan query 06:19:01 SkyScan query done: ret=0 az=117.63<-7842 ze=20.535<-10631 Statuses=0009 0009 06:19:01 Msec=1500 True Az=117.63 Ze=20.535 Az status=0009 Ze status=0009 06:19:01 Check angles 06:19:01 SkyScan query 06:19:02 SkyScan query done: ret=0 az=99.975<-6665 ze=41.895<-9207 Statuses=0009 0009 06:19:02 Msec=2250 True Az=99.975 Ze=41.895 Az status=0009 Ze status=0009 06:19:02 Check angles 06:19:02 SkyScan query 06:19:03 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 06:19:03 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 06:19:03 Check angles 06:19:03 SkyScan query 06:19:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:19:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:19:03 Message to Master queued w/err=0: serial=133568 error=0 06:19:08 Received message from Master: op=Filter serial=133569 06:19:08 Color wheel filter change from 0 to 0 06:19:08 FLIGetFilterPos err=0 currentPosition=0 06:19:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:08 Filter is already there-color wheel unchanged 06:19:08 Received message from Master: op=Shutter serial=133570 06:19:08 Shutter LASER close 06:19:08 Received message from Camera: op=State serial=133572 06:19:08 GetSingleValue result=40 Value=cccccccc 06:19:08 SkyScan query 06:19:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:19:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:09 Parameters OK 06:19:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:09 Set A/D data flow result=40 06:19:09 Set A/D channel type result=40 06:19:09 Set A/D encoding result=40 06:19:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:09 Set channel filter=0.000000e+000 result=40 06:19:09 Config A/D Result=40 06:19:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:09 Get A/D filter: -9.255963e+061 result=40 06:19:09 Get A/D value=-858993460 result=40 06:19:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:09 Parameters OK 06:19:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:09 Set A/D data flow result=40 06:19:09 Set A/D channel type result=40 06:19:09 Set A/D encoding result=40 06:19:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:09 Set channel filter=0.000000e+000 result=40 06:19:09 Config A/D Result=40 06:19:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:09 Get A/D filter: -9.255963e+061 result=40 06:19:09 Get A/D value=-858993460 result=40 06:19:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:09 Aux= 06:19:09 Message to Camera, serial 133572 queued 06:19:46 Received message from Master: op=PointingHead serial=133585 06:19:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:19:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:19:46 Point started: ret=0 06:19:46 point_skyscan result=0 06:19:47 Check angles 06:19:47 SkyScan query 06:19:48 SkyScan query done: ret=0 az=109.32<-7288 ze=38.475<-9435 Statuses=0009 0008 06:19:48 Msec=0 True Az=109.32 Ze=38.475 Az status=0009 Ze status=0008 06:19:48 Check angles 06:19:48 SkyScan query 06:19:48 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 06:19:48 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 06:19:49 Check angles 06:19:49 SkyScan query 06:19:49 SkyScan query done: ret=0 az=144.615<-9641 ze=38.505<-9433 Statuses=0009 0008 06:19:49 Msec=1500 True Az=144.615 Ze=38.505 Az status=0009 Ze status=0008 06:19:49 Check angles 06:19:49 SkyScan query 06:19:50 SkyScan query done: ret=0 az=162.12<-10808 ze=38.505<-9433 Statuses=0009 0008 06:19:50 Msec=2250 True Az=162.12 Ze=38.505 Az status=0009 Ze status=0008 06:19:50 Check angles 06:19:50 SkyScan query 06:19:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 06:19:51 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 06:19:51 Check angles 06:19:51 SkyScan query 06:19:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:19:51 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:19:51 Message to Master queued w/err=0: serial=133585 error=0 06:19:56 Received message from Master: op=Filter serial=133586 06:19:56 Color wheel filter change from 0 to 0 06:19:56 FLIGetFilterPos err=0 currentPosition=0 06:19:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:56 Filter is already there-color wheel unchanged 06:19:57 Received message from Master: op=Shutter serial=133587 06:19:57 Shutter LASER close 06:19:57 Received message from Camera: op=State serial=133589 06:19:57 GetSingleValue result=40 Value=cccccccc 06:19:57 SkyScan query 06:19:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:19:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:57 Parameters OK 06:19:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:57 Set A/D data flow result=40 06:19:57 Set A/D channel type result=40 06:19:57 Set A/D encoding result=40 06:19:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:57 Set channel filter=0.000000e+000 result=40 06:19:57 Config A/D Result=40 06:19:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:57 Get A/D filter: -9.255963e+061 result=40 06:19:57 Get A/D value=-858993460 result=40 06:19:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:57 Parameters OK 06:19:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:57 Set A/D data flow result=40 06:19:57 Set A/D channel type result=40 06:19:57 Set A/D encoding result=40 06:19:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:57 Set channel filter=0.000000e+000 result=40 06:19:57 Config A/D Result=40 06:19:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:57 Get A/D filter: -9.255963e+061 result=40 06:19:57 Get A/D value=-858993460 result=40 06:19:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:57 Aux= 06:19:57 Message to Camera, serial 133589 queued 06:20:34 Received message from Master: op=PointingHead serial=133602 06:20:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:20:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:20:34 Point started: ret=0 06:20:34 point_skyscan result=0 06:20:35 Check angles 06:20:35 SkyScan query 06:20:36 SkyScan query done: ret=0 az=152.775<-10185 ze=8.37<-11442 Statuses=0009 0009 06:20:36 Msec=0 True Az=152.775 Ze=8.37 Az status=0009 Ze status=0009 06:20:36 Check angles 06:20:36 SkyScan query 06:20:36 SkyScan query done: ret=0 az=134.895<-8993 ze=-12.99<-12866 Statuses=0009 0009 06:20:36 Msec=750 True Az=134.895 Ze=-12.99 Az status=0009 Ze status=0009 06:20:37 Check angles 06:20:37 SkyScan query 06:20:37 SkyScan query done: ret=0 az=117.39<-7826 ze=-33.975<-14265 Statuses=0009 0009 06:20:37 Msec=1500 True Az=117.39 Ze=-33.975 Az status=0009 Ze status=0009 06:20:37 Check angles 06:20:37 SkyScan query 06:20:38 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.57<-15438 Statuses=0009 0009 06:20:38 Msec=2250 True Az=100.02 Ze=-51.57 Az status=0009 Ze status=0009 06:20:38 Check angles 06:20:38 SkyScan query 06:20:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 06:20:39 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 06:20:39 Check angles 06:20:39 SkyScan query 06:20:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:20:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:20:39 Message to Master queued w/err=0: serial=133602 error=0 06:20:44 Received message from Master: op=Filter serial=133603 06:20:44 Color wheel filter change from 0 to 0 06:20:44 FLIGetFilterPos err=0 currentPosition=0 06:20:44 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:44 Filter is already there-color wheel unchanged 06:20:45 Received message from Master: op=Shutter serial=133604 06:20:45 Shutter LASER close 06:20:45 Received message from Camera: op=State serial=133606 06:20:45 GetSingleValue result=40 Value=cccccccc 06:20:45 SkyScan query 06:20:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:20:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:45 Parameters OK 06:20:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:45 Set A/D data flow result=40 06:20:45 Set A/D channel type result=40 06:20:45 Set A/D encoding result=40 06:20:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:45 Set channel filter=0.000000e+000 result=40 06:20:45 Config A/D Result=40 06:20:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:45 Get A/D filter: -9.255963e+061 result=40 06:20:45 Get A/D value=-858993460 result=40 06:20:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:45 Parameters OK 06:20:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:45 Set A/D data flow result=40 06:20:45 Set A/D channel type result=40 06:20:45 Set A/D encoding result=40 06:20:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:45 Set channel filter=0.000000e+000 result=40 06:20:45 Config A/D Result=40 06:20:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:45 Get A/D filter: -9.255963e+061 result=40 06:20:45 Get A/D value=-858993460 result=40 06:20:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:45 Aux= 06:20:45 Message to Camera, serial 133606 queued 06:21:22 Received message from Master: op=PointingHead serial=133619 06:21:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:21:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:21:22 Point started: ret=0 06:21:22 point_skyscan result=0 06:21:23 Check angles 06:21:23 SkyScan query 06:21:24 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.57<-17438 Statuses=0009 0009 06:21:24 Msec=0 True Az=109.185 Ze=-81.57 Az status=0009 Ze status=0009 06:21:24 Check angles 06:21:24 SkyScan query 06:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.96<-18864 Statuses=0008 0009 06:21:24 Msec=750 True Az=112.995 Ze=-102.96 Az status=0008 Ze status=0009 06:21:25 Check angles 06:21:25 SkyScan query 06:21:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.93<-20262 Statuses=0008 0009 06:21:25 Msec=1500 True Az=112.995 Ze=-123.93 Az status=0008 Ze status=0009 06:21:25 Check angles 06:21:25 SkyScan query 06:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.84<-21656 Statuses=0008 0009 06:21:26 Msec=2250 True Az=112.995 Ze=-144.84 Az status=0008 Ze status=0009 06:21:26 Check angles 06:21:26 SkyScan query 06:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.81<-23054 Statuses=0008 0009 06:21:27 Msec=3000 True Az=112.995 Ze=-165.81 Az status=0008 Ze status=0009 06:21:27 Check angles 06:21:27 SkyScan query 06:21:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:21:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:21:28 Message to Master queued w/err=0: serial=133619 error=0 06:21:33 Received message from Master: op=Filter serial=133620 06:21:33 Color wheel filter change from 0 to 0 06:21:33 FLIGetFilterPos err=0 currentPosition=0 06:21:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:33 Filter is already there-color wheel unchanged 06:21:33 Received message from Master: op=Shutter serial=133621 06:21:33 Shutter LASER open 06:21:33 Received message from Camera: op=State serial=133623 06:21:33 GetSingleValue result=40 Value=cccccccc 06:21:33 SkyScan query 06:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:21:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:33 Parameters OK 06:21:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:33 Set A/D data flow result=40 06:21:33 Set A/D channel type result=40 06:21:33 Set A/D encoding result=40 06:21:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:33 Set channel filter=0.000000e+000 result=40 06:21:33 Config A/D Result=40 06:21:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:33 Get A/D filter: -9.255963e+061 result=40 06:21:33 Get A/D value=-858993460 result=40 06:21:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:33 Parameters OK 06:21:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:33 Set A/D data flow result=40 06:21:33 Set A/D channel type result=40 06:21:33 Set A/D encoding result=40 06:21:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:33 Set channel filter=0.000000e+000 result=40 06:21:33 Config A/D Result=40 06:21:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:33 Get A/D filter: -9.255963e+061 result=40 06:21:33 Get A/D value=-858993460 result=40 06:21:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:33 Aux= 06:21:33 Message to Camera, serial 133623 queued 06:21:42 Received message from Master: op=Shutter serial=133633 06:21:42 Shutter LASER close 06:21:42 Received message from Master: op=PointingHead serial=133637 06:21:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:21:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:21:43 Point started: ret=0 06:21:43 point_skyscan result=0 06:21:43 Check angles 06:21:43 SkyScan query 06:21:44 SkyScan query done: ret=0 az=89.835<-5989 ze=157.185<-1521 Statuses=0009 0009 06:21:44 Msec=0 True Az=89.835 Ze=157.185 Az status=0009 Ze status=0009 06:21:44 Check angles 06:21:44 SkyScan query 06:21:45 SkyScan query done: ret=0 az=72.405<-4827 ze=136.2<-2920 Statuses=0009 0009 06:21:45 Msec=750 True Az=72.405 Ze=136.2 Az status=0009 Ze status=0009 06:21:45 Check angles 06:21:45 SkyScan query 06:21:45 SkyScan query done: ret=0 az=55.065<-3671 ze=115.29<-4314 Statuses=0009 0009 06:21:45 Msec=1500 True Az=55.065 Ze=115.29 Az status=0009 Ze status=0009 06:21:46 Check angles 06:21:46 SkyScan query 06:21:46 SkyScan query done: ret=0 az=41.025<-2735 ze=94.275<-5715 Statuses=0009 0009 06:21:46 Msec=2250 True Az=41.025 Ze=94.275 Az status=0009 Ze status=0009 06:21:46 Check angles 06:21:46 SkyScan query 06:21:47 SkyScan query done: ret=0 az=40.995<-2733 ze=73.35<-7110 Statuses=0008 0009 06:21:47 Msec=3000 True Az=40.995 Ze=73.35 Az status=0008 Ze status=0009 06:21:47 Check angles 06:21:47 SkyScan query 06:21:48 SkyScan query done: ret=0 az=40.995<-2733 ze=52.8<-8480 Statuses=0008 0009 06:21:48 Msec=3750 True Az=40.995 Ze=52.8 Az status=0008 Ze status=0009 06:21:48 Check angles 06:21:48 SkyScan query 06:21:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:21:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:21:48 Message to Master queued w/err=0: serial=133637 error=0 06:21:53 Received message from Master: op=Filter serial=133638 06:21:53 Color wheel filter change from 0 to 0 06:21:53 FLIGetFilterPos err=0 currentPosition=0 06:21:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:53 Filter is already there-color wheel unchanged 06:21:54 Received message from Master: op=Shutter serial=133639 06:21:54 Shutter LASER close 06:21:54 Received message from Camera: op=State serial=133641 06:21:54 GetSingleValue result=40 Value=cccccccc 06:21:54 SkyScan query 06:21:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:21:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:54 Parameters OK 06:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:54 Set A/D data flow result=40 06:21:54 Set A/D channel type result=40 06:21:54 Set A/D encoding result=40 06:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:54 Set channel filter=0.000000e+000 result=40 06:21:54 Config A/D Result=40 06:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:54 Get A/D filter: -9.255963e+061 result=40 06:21:54 Get A/D value=-858993460 result=40 06:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:54 Parameters OK 06:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:54 Set A/D data flow result=40 06:21:54 Set A/D channel type result=40 06:21:54 Set A/D encoding result=40 06:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:54 Set channel filter=0.000000e+000 result=40 06:21:54 Config A/D Result=40 06:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:54 Get A/D filter: -9.255963e+061 result=40 06:21:54 Get A/D value=-858993460 result=40 06:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:54 Aux= 06:21:54 Message to Camera, serial 133641 queued 06:22:31 Received message from Master: op=PointingHead serial=133654 06:22:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:22:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:22:32 Point started: ret=0 06:22:32 point_skyscan result=0 06:22:32 Check angles 06:22:32 SkyScan query 06:22:33 SkyScan query done: ret=0 az=63.795<-4253 ze=66.555<-7563 Statuses=0009 0008 06:22:33 Msec=0 True Az=63.795 Ze=66.555 Az status=0009 Ze status=0008 06:22:33 Check angles 06:22:33 SkyScan query 06:22:34 SkyScan query done: ret=0 az=81.165<-5411 ze=66.495<-7567 Statuses=0009 0008 06:22:34 Msec=750 True Az=81.165 Ze=66.495 Az status=0009 Ze status=0008 06:22:34 Check angles 06:22:34 SkyScan query 06:22:34 SkyScan query done: ret=0 az=98.715<-6581 ze=66.495<-7567 Statuses=0009 0008 06:22:34 Msec=1500 True Az=98.715 Ze=66.495 Az status=0009 Ze status=0008 06:22:35 Check angles 06:22:35 SkyScan query 06:22:35 SkyScan query done: ret=0 az=116.115<-7741 ze=66.495<-7567 Statuses=0009 0008 06:22:35 Msec=2250 True Az=116.115 Ze=66.495 Az status=0009 Ze status=0008 06:22:35 Check angles 06:22:35 SkyScan query 06:22:36 SkyScan query done: ret=0 az=133.65<-8910 ze=66.495<-7567 Statuses=0009 0008 06:22:36 Msec=3000 True Az=133.65 Ze=66.495 Az status=0009 Ze status=0008 06:22:36 Check angles 06:22:36 SkyScan query 06:22:37 SkyScan query done: ret=0 az=151.08<-10072 ze=66.495<-7567 Statuses=0009 0008 06:22:37 Msec=3750 True Az=151.08 Ze=66.495 Az status=0009 Ze status=0008 06:22:37 Check angles 06:22:37 SkyScan query 06:22:37 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 06:22:37 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 06:22:37 Message to Master queued w/err=0: serial=133654 error=0 06:22:42 Received message from Master: op=Filter serial=133655 06:22:42 Color wheel filter change from 0 to 0 06:22:42 FLIGetFilterPos err=0 currentPosition=0 06:22:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:42 Filter is already there-color wheel unchanged 06:22:43 Received message from Master: op=Shutter serial=133656 06:22:43 Shutter LASER close 06:22:43 Received message from Camera: op=State serial=133658 06:22:43 GetSingleValue result=40 Value=cccccccc 06:22:43 SkyScan query 06:22:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:22:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:43 Parameters OK 06:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:43 Set A/D data flow result=40 06:22:43 Set A/D channel type result=40 06:22:43 Set A/D encoding result=40 06:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:43 Set channel filter=0.000000e+000 result=40 06:22:43 Config A/D Result=40 06:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:43 Get A/D filter: -9.255963e+061 result=40 06:22:43 Get A/D value=-858993460 result=40 06:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:43 Parameters OK 06:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:43 Set A/D data flow result=40 06:22:43 Set A/D channel type result=40 06:22:43 Set A/D encoding result=40 06:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:43 Set channel filter=0.000000e+000 result=40 06:22:43 Config A/D Result=40 06:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:43 Get A/D filter: -9.255963e+061 result=40 06:22:43 Get A/D value=-858993460 result=40 06:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:43 Aux= 06:22:43 Message to Camera, serial 133658 queued 06:23:20 Received message from Master: op=PointingHead serial=133671 06:23:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:23:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:23:20 Point started: ret=0 06:23:20 point_skyscan result=0 06:23:21 Check angles 06:23:21 SkyScan query 06:23:22 SkyScan query done: ret=0 az=134.535<-8969 ze=36.195<-9587 Statuses=0009 0009 06:23:22 Msec=0 True Az=134.535 Ze=36.195 Az status=0009 Ze status=0009 06:23:22 Check angles 06:23:22 SkyScan query 06:23:22 SkyScan query done: ret=0 az=117.075<-7805 ze=15.27<-10982 Statuses=0009 0009 06:23:22 Msec=750 True Az=117.075 Ze=15.27 Az status=0009 Ze status=0009 06:23:23 Check angles 06:23:23 SkyScan query 06:23:23 SkyScan query done: ret=0 az=99.6<-6640 ze=-5.73<-12382 Statuses=0009 0009 06:23:23 Msec=1500 True Az=99.6 Ze=-5.73 Az status=0009 Ze status=0009 06:23:23 Check angles 06:23:23 SkyScan query 06:23:24 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.7<-13780 Statuses=0009 0009 06:23:24 Msec=2250 True Az=82.215 Ze=-26.7 Az status=0009 Ze status=0009 06:23:24 Check angles 06:23:24 SkyScan query 06:23:25 SkyScan query done: ret=0 az=64.665<-4311 ze=-38.58<-14572 Statuses=0009 0008 06:23:25 Msec=3000 True Az=64.665 Ze=-38.58 Az status=0009 Ze status=0008 06:23:25 Check angles 06:23:25 SkyScan query 06:23:25 SkyScan query done: ret=0 az=47.265<-3151 ze=-38.535<-14569 Statuses=0009 0008 06:23:25 Msec=3750 True Az=47.265 Ze=-38.535 Az status=0009 Ze status=0008 06:23:26 Check angles 06:23:26 SkyScan query 06:23:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:23:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:23:26 Message to Master queued w/err=0: serial=133671 error=0 06:23:31 Received message from Master: op=Filter serial=133672 06:23:31 Color wheel filter change from 0 to 0 06:23:31 FLIGetFilterPos err=0 currentPosition=0 06:23:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:31 Filter is already there-color wheel unchanged 06:23:31 Received message from Master: op=Shutter serial=133673 06:23:31 Shutter LASER close 06:23:31 Received message from Camera: op=State serial=133675 06:23:31 GetSingleValue result=40 Value=cccccccc 06:23:31 SkyScan query 06:23:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:23:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:32 Parameters OK 06:23:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:32 Set A/D data flow result=40 06:23:32 Set A/D channel type result=40 06:23:32 Set A/D encoding result=40 06:23:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:32 Set channel filter=0.000000e+000 result=40 06:23:32 Config A/D Result=40 06:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:32 Get A/D filter: -9.255963e+061 result=40 06:23:32 Get A/D value=-858993460 result=40 06:23:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:32 Parameters OK 06:23:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:32 Set A/D data flow result=40 06:23:32 Set A/D channel type result=40 06:23:32 Set A/D encoding result=40 06:23:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:32 Set channel filter=0.000000e+000 result=40 06:23:32 Config A/D Result=40 06:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:32 Get A/D filter: -9.255963e+061 result=40 06:23:32 Get A/D value=-858993460 result=40 06:23:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:32 Aux= 06:23:32 Message to Camera, serial 133675 queued 06:24:08 Received message from Master: op=PointingHead serial=133687 06:24:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:24:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:24:08 Point started: ret=0 06:24:08 point_skyscan result=0 06:24:09 Check angles 06:24:09 SkyScan query 06:24:10 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.265<-16551 Statuses=0009 0009 06:24:10 Msec=0 True Az=63.945 Ze=-68.265 Az status=0009 Ze status=0009 06:24:10 Check angles 06:24:10 SkyScan query 06:24:10 SkyScan query done: ret=0 az=81.405<-5427 ze=-89.25<-17950 Statuses=0009 0009 06:24:10 Msec=750 True Az=81.405 Ze=-89.25 Az status=0009 Ze status=0009 06:24:11 Check angles 06:24:11 SkyScan query 06:24:11 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.64<-19376 Statuses=0009 0009 06:24:11 Msec=1500 True Az=99.195 Ze=-110.64 Az status=0009 Ze status=0009 06:24:11 Check angles 06:24:11 SkyScan query 06:24:12 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.55<-20770 Statuses=0009 0009 06:24:12 Msec=2250 True Az=116.745 Ze=-131.55 Az status=0009 Ze status=0009 06:24:12 Check angles 06:24:12 SkyScan query 06:24:13 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 06:24:13 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 06:24:13 Check angles 06:24:13 SkyScan query 06:24:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 06:24:13 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 06:24:13 Message to Master queued w/err=0: serial=133687 error=0 06:24:18 Received message from Master: op=Filter serial=133688 06:24:18 Color wheel filter change from 0 to 0 06:24:18 FLIGetFilterPos err=0 currentPosition=0 06:24:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:18 Filter is already there-color wheel unchanged 06:24:19 Received message from Master: op=Shutter serial=133689 06:24:19 Shutter LASER close 06:24:19 Received message from Camera: op=State serial=133691 06:24:19 GetSingleValue result=40 Value=cccccccc 06:24:19 SkyScan query 06:24:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:24:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:19 Parameters OK 06:24:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:19 Set A/D data flow result=40 06:24:19 Set A/D channel type result=40 06:24:19 Set A/D encoding result=40 06:24:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:19 Set channel filter=0.000000e+000 result=40 06:24:19 Config A/D Result=40 06:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:19 Get A/D filter: -9.255963e+061 result=40 06:24:19 Get A/D value=-858993460 result=40 06:24:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:19 Parameters OK 06:24:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:19 Set A/D data flow result=40 06:24:19 Set A/D channel type result=40 06:24:19 Set A/D encoding result=40 06:24:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:19 Set channel filter=0.000000e+000 result=40 06:24:19 Config A/D Result=40 06:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:19 Get A/D filter: -9.255963e+061 result=40 06:24:19 Get A/D value=-858993460 result=40 06:24:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:19 Aux= 06:24:19 Message to Camera, serial 133691 queued 06:24:56 Received message from Master: op=PointingHead serial=133704 06:24:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:24:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:24:56 Point started: ret=0 06:24:56 point_skyscan result=0 06:24:57 Check angles 06:24:57 SkyScan query 06:24:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 06:24:58 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 06:24:58 Check angles 06:24:58 SkyScan query 06:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:24:58 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:24:58 Message to Master queued w/err=0: serial=133704 error=0 06:25:03 Received message from Master: op=Filter serial=133705 06:25:03 Color wheel filter change from 0 to 0 06:25:03 FLIGetFilterPos err=0 currentPosition=0 06:25:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:03 Filter is already there-color wheel unchanged 06:25:04 Received message from Master: op=Shutter serial=133706 06:25:04 Shutter LASER open 06:25:04 Received message from Camera: op=State serial=133708 06:25:04 GetSingleValue result=40 Value=cccccccc 06:25:04 SkyScan query 06:25:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:25:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:04 Parameters OK 06:25:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:04 Set A/D data flow result=40 06:25:04 Set A/D channel type result=40 06:25:04 Set A/D encoding result=40 06:25:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:04 Set channel filter=0.000000e+000 result=40 06:25:04 Config A/D Result=40 06:25:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:04 Get A/D filter: -9.255963e+061 result=40 06:25:04 Get A/D value=-858993460 result=40 06:25:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:04 Parameters OK 06:25:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:04 Set A/D data flow result=40 06:25:04 Set A/D channel type result=40 06:25:04 Set A/D encoding result=40 06:25:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:04 Set channel filter=0.000000e+000 result=40 06:25:04 Config A/D Result=40 06:25:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:04 Get A/D filter: -9.255963e+061 result=40 06:25:04 Get A/D value=-858993460 result=40 06:25:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:04 Aux= 06:25:04 Message to Camera, serial 133708 queued 06:25:13 Received message from Master: op=Shutter serial=133718 06:25:13 Shutter LASER close 06:25:13 Received message from Master: op=PointingHead serial=133722 06:25:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:25:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:25:14 Point started: ret=0 06:25:14 point_skyscan result=0 06:25:14 Check angles 06:25:14 SkyScan query 06:25:15 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.115<-21541 Statuses=0009 0009 06:25:15 Msec=0 True Az=136.17 Ze=-143.115 Az status=0009 Ze status=0009 06:25:15 Check angles 06:25:15 SkyScan query 06:25:16 SkyScan query done: ret=0 az=154.005<-10267 ze=-121.725<-20115 Statuses=0009 0009 06:25:16 Msec=750 True Az=154.005 Ze=-121.725 Az status=0009 Ze status=0009 06:25:16 Check angles 06:25:16 SkyScan query 06:25:17 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.695<-18713 Statuses=0009 0009 06:25:17 Msec=1500 True Az=171.48 Ze=-100.695 Az status=0009 Ze status=0009 06:25:17 Check angles 06:25:17 SkyScan query 06:25:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.8<-17320 Statuses=0008 0009 06:25:17 Msec=2250 True Az=176.01 Ze=-79.8 Az status=0008 Ze status=0009 06:25:17 Check angles 06:25:17 SkyScan query 06:25:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.785<-15919 Statuses=0008 0009 06:25:18 Msec=3000 True Az=176.01 Ze=-58.785 Az status=0008 Ze status=0009 06:25:18 Check angles 06:25:18 SkyScan query 06:25:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:25:19 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:25:19 Message to Master queued w/err=0: serial=133722 error=0 06:25:24 Received message from Master: op=Filter serial=133723 06:25:24 Color wheel filter change from 0 to 0 06:25:24 FLIGetFilterPos err=0 currentPosition=0 06:25:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:24 Filter is already there-color wheel unchanged 06:25:24 Received message from Master: op=Shutter serial=133724 06:25:24 Shutter LASER close 06:25:24 Received message from Camera: op=State serial=133726 06:25:24 GetSingleValue result=40 Value=cccccccc 06:25:24 SkyScan query 06:25:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:25:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:25 Parameters OK 06:25:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:25 Set A/D data flow result=40 06:25:25 Set A/D channel type result=40 06:25:25 Set A/D encoding result=40 06:25:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:25 Set channel filter=0.000000e+000 result=40 06:25:25 Config A/D Result=40 06:25:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:25 Get A/D filter: -9.255963e+061 result=40 06:25:25 Get A/D value=-858993460 result=40 06:25:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:25 Parameters OK 06:25:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:25 Set A/D data flow result=40 06:25:25 Set A/D channel type result=40 06:25:25 Set A/D encoding result=40 06:25:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:25 Set channel filter=0.000000e+000 result=40 06:25:25 Config A/D Result=40 06:25:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:25 Get A/D filter: -9.255963e+061 result=40 06:25:25 Get A/D value=-858993460 result=40 06:25:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:25 Aux= 06:25:25 Message to Camera, serial 133726 queued 06:26:02 Received message from Master: op=PointingHead serial=133739 06:26:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:26:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:26:02 Point started: ret=0 06:26:02 point_skyscan result=0 06:26:03 Check angles 06:26:03 SkyScan query 06:26:03 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.99<-13466 Statuses=0009 0009 06:26:03 Msec=0 True Az=152.97 Ze=-21.99 Az status=0009 Ze status=0009 06:26:03 Check angles 06:26:03 SkyScan query 06:26:04 SkyScan query done: ret=0 az=135.225<-9015 ze=-0.525<-12035 Statuses=0009 0009 06:26:04 Msec=750 True Az=135.225 Ze=-0.525 Az status=0009 Ze status=0009 06:26:04 Check angles 06:26:04 SkyScan query [UTC 2018-12-14 06:26:05] 06:26:05 SkyScan query done: ret=0 az=117.585<-7839 ze=20.415<-10639 Statuses=0009 0009 06:26:05 Msec=1500 True Az=117.585 Ze=20.415 Az status=0009 Ze status=0009 06:26:05 Check angles 06:26:05 SkyScan query 06:26:06 SkyScan query done: ret=0 az=100.2<-6680 ze=41.385<-9241 Statuses=0009 0009 06:26:06 Msec=2250 True Az=100.2 Ze=41.385 Az status=0009 Ze status=0009 06:26:06 Check angles 06:26:06 SkyScan query 06:26:06 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 06:26:06 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 06:26:06 Check angles 06:26:06 SkyScan query 06:26:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:26:07 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:26:07 Message to Master queued w/err=0: serial=133739 error=0 06:26:12 Received message from Master: op=Filter serial=133740 06:26:12 Color wheel filter change from 0 to 0 06:26:12 FLIGetFilterPos err=0 currentPosition=0 06:26:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:12 Filter is already there-color wheel unchanged 06:26:12 Received message from Master: op=Shutter serial=133741 06:26:12 Shutter LASER close 06:26:12 Received message from Camera: op=State serial=133743 06:26:12 GetSingleValue result=40 Value=cccccccc 06:26:12 SkyScan query 06:26:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:26:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:13 Parameters OK 06:26:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:13 Set A/D data flow result=40 06:26:13 Set A/D channel type result=40 06:26:13 Set A/D encoding result=40 06:26:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:13 Set channel filter=0.000000e+000 result=40 06:26:13 Config A/D Result=40 06:26:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:13 Get A/D filter: -9.255963e+061 result=40 06:26:13 Get A/D value=-858993460 result=40 06:26:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:13 Parameters OK 06:26:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:13 Set A/D data flow result=40 06:26:13 Set A/D channel type result=40 06:26:13 Set A/D encoding result=40 06:26:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:13 Set channel filter=0.000000e+000 result=40 06:26:13 Config A/D Result=40 06:26:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:13 Get A/D filter: -9.255963e+061 result=40 06:26:13 Get A/D value=-858993460 result=40 06:26:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:13 Aux= 06:26:13 Message to Camera, serial 133743 queued 06:26:50 Received message from Master: op=PointingHead serial=133756 06:26:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:26:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:26:50 Point started: ret=0 06:26:50 point_skyscan result=0 06:26:51 Check angles 06:26:51 SkyScan query 06:26:51 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 06:26:51 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 06:26:51 Check angles 06:26:51 SkyScan query 06:26:52 SkyScan query done: ret=0 az=126.825<-8455 ze=38.505<-9433 Statuses=0009 0008 06:26:52 Msec=750 True Az=126.825 Ze=38.505 Az status=0009 Ze status=0008 06:26:52 Check angles 06:26:52 SkyScan query 06:26:53 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 06:26:53 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 06:26:53 Check angles 06:26:53 SkyScan query 06:26:54 SkyScan query done: ret=0 az=161.805<-10787 ze=38.505<-9433 Statuses=0009 0008 06:26:54 Msec=2250 True Az=161.805 Ze=38.505 Az status=0009 Ze status=0008 06:26:54 Check angles 06:26:54 SkyScan query 06:26:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 06:26:54 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 06:26:55 Check angles 06:26:55 SkyScan query 06:26:55 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:26:55 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:26:55 Message to Master queued w/err=0: serial=133756 error=0 06:27:00 Received message from Master: op=Filter serial=133757 06:27:00 Color wheel filter change from 0 to 0 06:27:00 FLIGetFilterPos err=0 currentPosition=0 06:27:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:00 Filter is already there-color wheel unchanged 06:27:00 Received message from Master: op=Shutter serial=133758 06:27:00 Shutter LASER close 06:27:00 Received message from Camera: op=State serial=133760 06:27:00 GetSingleValue result=40 Value=cccccccc 06:27:00 SkyScan query 06:27:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:27:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:01 Parameters OK 06:27:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:01 Set A/D data flow result=40 06:27:01 Set A/D channel type result=40 06:27:01 Set A/D encoding result=40 06:27:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:01 Set channel filter=0.000000e+000 result=40 06:27:01 Config A/D Result=40 06:27:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:01 Get A/D filter: -9.255963e+061 result=40 06:27:01 Get A/D value=-858993460 result=40 06:27:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:01 Parameters OK 06:27:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:01 Set A/D data flow result=40 06:27:01 Set A/D channel type result=40 06:27:01 Set A/D encoding result=40 06:27:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:01 Set channel filter=0.000000e+000 result=40 06:27:01 Config A/D Result=40 06:27:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:01 Get A/D filter: -9.255963e+061 result=40 06:27:01 Get A/D value=-858993460 result=40 06:27:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:01 Aux= 06:27:01 Message to Camera, serial 133760 queued 06:27:38 Received message from Master: op=PointingHead serial=133773 06:27:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:27:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:27:38 Point started: ret=0 06:27:38 point_skyscan result=0 06:27:39 Check angles 06:27:39 SkyScan query 06:27:39 SkyScan query done: ret=0 az=152.955<-10197 ze=8.7<-11420 Statuses=0009 0009 06:27:39 Msec=0 True Az=152.955 Ze=8.7 Az status=0009 Ze status=0009 06:27:40 Check angles 06:27:40 SkyScan query 06:27:40 SkyScan query done: ret=0 az=135.54<-9036 ze=-12.27<-12818 Statuses=0009 0009 06:27:40 Msec=750 True Az=135.54 Ze=-12.27 Az status=0009 Ze status=0009 06:27:40 Check angles 06:27:40 SkyScan query 06:27:41 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.21<-14214 Statuses=0009 0009 06:27:41 Msec=1500 True Az=118.02 Ze=-33.21 Az status=0009 Ze status=0009 06:27:41 Check angles 06:27:41 SkyScan query 06:27:42 SkyScan query done: ret=0 az=100.605<-6707 ze=-51.54<-15436 Statuses=0009 0009 06:27:42 Msec=2250 True Az=100.605 Ze=-51.54 Az status=0009 Ze status=0009 06:27:42 Check angles 06:27:42 SkyScan query 06:27:42 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 06:27:42 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 06:27:43 Check angles 06:27:43 SkyScan query 06:27:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:27:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:27:43 Message to Master queued w/err=0: serial=133773 error=0 06:27:48 Received message from Master: op=Filter serial=133774 06:27:48 Color wheel filter change from 0 to 0 06:27:48 FLIGetFilterPos err=0 currentPosition=0 06:27:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:48 Filter is already there-color wheel unchanged 06:27:48 Received message from Master: op=Shutter serial=133775 06:27:48 Shutter LASER close 06:27:48 Received message from Camera: op=State serial=133777 06:27:48 GetSingleValue result=40 Value=cccccccc 06:27:48 SkyScan query 06:27:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:27:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:49 Parameters OK 06:27:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:49 Set A/D data flow result=40 06:27:49 Set A/D channel type result=40 06:27:49 Set A/D encoding result=40 06:27:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:49 Set channel filter=0.000000e+000 result=40 06:27:49 Config A/D Result=40 06:27:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:49 Get A/D filter: -9.255963e+061 result=40 06:27:49 Get A/D value=-858993460 result=40 06:27:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:49 Parameters OK 06:27:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:49 Set A/D data flow result=40 06:27:49 Set A/D channel type result=40 06:27:49 Set A/D encoding result=40 06:27:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:49 Set channel filter=0.000000e+000 result=40 06:27:49 Config A/D Result=40 06:27:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:49 Get A/D filter: -9.255963e+061 result=40 06:27:49 Get A/D value=-858993460 result=40 06:27:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:49 Aux= 06:27:49 Message to Camera, serial 133777 queued 06:28:26 Received message from Master: op=PointingHead serial=133790 06:28:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:28:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:28:26 Point started: ret=0 06:28:26 point_skyscan result=0 06:28:27 Check angles 06:28:27 SkyScan query 06:28:28 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.765<-17451 Statuses=0009 0009 06:28:28 Msec=0 True Az=109.395 Ze=-81.765 Az status=0009 Ze status=0009 06:28:28 Check angles 06:28:28 SkyScan query 06:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.11<-18874 Statuses=0008 0009 06:28:28 Msec=750 True Az=112.995 Ze=-103.11 Az status=0008 Ze status=0009 06:28:28 Check angles 06:28:28 SkyScan query 06:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.065<-20271 Statuses=0008 0009 06:28:29 Msec=1500 True Az=112.995 Ze=-124.065 Az status=0008 Ze status=0009 06:28:29 Check angles 06:28:29 SkyScan query 06:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 06:28:30 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 06:28:30 Check angles 06:28:30 SkyScan query 06:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 06:28:31 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 06:28:31 Check angles 06:28:31 SkyScan query 06:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:28:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:28:31 Message to Master queued w/err=0: serial=133790 error=0 06:28:36 Received message from Master: op=Filter serial=133791 06:28:36 Color wheel filter change from 0 to 0 06:28:36 FLIGetFilterPos err=0 currentPosition=0 06:28:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:36 Filter is already there-color wheel unchanged 06:28:36 Received message from Master: op=Shutter serial=133792 06:28:36 Shutter LASER open 06:28:37 Received message from Camera: op=State serial=133794 06:28:37 GetSingleValue result=40 Value=cccccccc 06:28:37 SkyScan query 06:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:28:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:37 Parameters OK 06:28:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:37 Set A/D data flow result=40 06:28:37 Set A/D channel type result=40 06:28:37 Set A/D encoding result=40 06:28:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:37 Set channel filter=0.000000e+000 result=40 06:28:37 Config A/D Result=40 06:28:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:37 Get A/D filter: -9.255963e+061 result=40 06:28:37 Get A/D value=-858993460 result=40 06:28:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:37 Parameters OK 06:28:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:37 Set A/D data flow result=40 06:28:37 Set A/D channel type result=40 06:28:37 Set A/D encoding result=40 06:28:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:37 Set channel filter=0.000000e+000 result=40 06:28:37 Config A/D Result=40 06:28:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:37 Get A/D filter: -9.255963e+061 result=40 06:28:37 Get A/D value=-858993460 result=40 06:28:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:37 Aux= 06:28:37 Message to Camera, serial 133794 queued 06:28:46 Received message from Master: op=Shutter serial=133804 06:28:46 Shutter LASER close 06:28:46 Received message from Master: op=PointingHead serial=133808 06:28:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:28:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:28:46 Point started: ret=0 06:28:46 point_skyscan result=0 06:28:47 Check angles 06:28:47 SkyScan query 06:28:48 SkyScan query done: ret=0 az=90.015<-6001 ze=157.395<-1507 Statuses=0009 0009 06:28:48 Msec=0 True Az=90.015 Ze=157.395 Az status=0009 Ze status=0009 06:28:48 Check angles 06:28:48 SkyScan query 06:28:49 SkyScan query done: ret=0 az=72.6<-4840 ze=136.395<-2907 Statuses=0009 0009 06:28:49 Msec=750 True Az=72.6 Ze=136.395 Az status=0009 Ze status=0009 06:28:49 Check angles 06:28:49 SkyScan query 06:28:49 SkyScan query done: ret=0 az=55.17<-3678 ze=115.5<-4300 Statuses=0009 0009 06:28:49 Msec=1500 True Az=55.17 Ze=115.5 Az status=0009 Ze status=0009 06:28:49 Check angles 06:28:49 SkyScan query 06:28:50 SkyScan query done: ret=0 az=41.025<-2735 ze=94.485<-5701 Statuses=0009 0009 06:28:50 Msec=2250 True Az=41.025 Ze=94.485 Az status=0009 Ze status=0009 06:28:50 Check angles 06:28:50 SkyScan query 06:28:51 SkyScan query done: ret=0 az=40.995<-2733 ze=73.575<-7095 Statuses=0008 0009 06:28:51 Msec=3000 True Az=40.995 Ze=73.575 Az status=0008 Ze status=0009 06:28:51 Check angles 06:28:51 SkyScan query 06:28:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.95<-8470 Statuses=0008 0009 06:28:52 Msec=3750 True Az=40.995 Ze=52.95 Az status=0008 Ze status=0009 06:28:52 Check angles 06:28:52 SkyScan query 06:28:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:28:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:28:52 Message to Master queued w/err=0: serial=133808 error=0 06:28:57 Received message from Master: op=Filter serial=133809 06:28:57 Color wheel filter change from 0 to 0 06:28:57 FLIGetFilterPos err=0 currentPosition=0 06:28:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:57 Filter is already there-color wheel unchanged 06:28:57 Received message from Master: op=Shutter serial=133810 06:28:57 Shutter LASER close 06:28:58 Received message from Camera: op=State serial=133812 06:28:58 GetSingleValue result=40 Value=cccccccc 06:28:58 SkyScan query 06:28:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:28:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:58 Parameters OK 06:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:58 Set A/D data flow result=40 06:28:58 Set A/D channel type result=40 06:28:58 Set A/D encoding result=40 06:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:58 Set channel filter=0.000000e+000 result=40 06:28:58 Config A/D Result=40 06:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:58 Get A/D filter: -9.255963e+061 result=40 06:28:58 Get A/D value=-858993460 result=40 06:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:58 Parameters OK 06:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:58 Set A/D data flow result=40 06:28:58 Set A/D channel type result=40 06:28:58 Set A/D encoding result=40 06:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:58 Set channel filter=0.000000e+000 result=40 06:28:58 Config A/D Result=40 06:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:58 Get A/D filter: -9.255963e+061 result=40 06:28:58 Get A/D value=-858993460 result=40 06:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:58 Aux= 06:28:58 Message to Camera, serial 133812 queued 06:29:35 Received message from Master: op=PointingHead serial=133825 06:29:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:29:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:29:35 Point started: ret=0 06:29:35 point_skyscan result=0 06:29:36 Check angles 06:29:36 SkyScan query 06:29:37 SkyScan query done: ret=0 az=64.41<-4294 ze=66.555<-7563 Statuses=0009 0008 06:29:37 Msec=0 True Az=64.41 Ze=66.555 Az status=0009 Ze status=0008 06:29:37 Check angles 06:29:37 SkyScan query 06:29:37 SkyScan query done: ret=0 az=81.885<-5459 ze=66.495<-7567 Statuses=0009 0008 06:29:37 Msec=750 True Az=81.885 Ze=66.495 Az status=0009 Ze status=0008 06:29:38 Check angles 06:29:38 SkyScan query 06:29:38 SkyScan query done: ret=0 az=99.27<-6618 ze=66.495<-7567 Statuses=0009 0008 06:29:38 Msec=1500 True Az=99.27 Ze=66.495 Az status=0009 Ze status=0008 06:29:38 Check angles 06:29:38 SkyScan query 06:29:39 SkyScan query done: ret=0 az=116.835<-7789 ze=66.495<-7567 Statuses=0009 0008 06:29:39 Msec=2250 True Az=116.835 Ze=66.495 Az status=0009 Ze status=0008 06:29:39 Check angles 06:29:39 SkyScan query 06:29:40 SkyScan query done: ret=0 az=134.34<-8956 ze=66.495<-7567 Statuses=0009 0008 06:29:40 Msec=3000 True Az=134.34 Ze=66.495 Az status=0009 Ze status=0008 06:29:40 Check angles 06:29:40 SkyScan query 06:29:40 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 06:29:40 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 06:29:41 Check angles 06:29:41 SkyScan query 06:29:41 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 06:29:41 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 06:29:41 Message to Master queued w/err=0: serial=133825 error=0 06:29:46 Received message from Master: op=Filter serial=133826 06:29:46 Color wheel filter change from 0 to 0 06:29:46 FLIGetFilterPos err=0 currentPosition=0 06:29:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:29:46 Filter is already there-color wheel unchanged 06:29:46 Received message from Master: op=Shutter serial=133827 06:29:46 Shutter LASER close 06:29:46 Received message from Camera: op=State serial=133829 06:29:46 GetSingleValue result=40 Value=cccccccc 06:29:46 SkyScan query 06:29:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:29:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:47 Parameters OK 06:29:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:47 Set A/D data flow result=40 06:29:47 Set A/D channel type result=40 06:29:47 Set A/D encoding result=40 06:29:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:47 Set channel filter=0.000000e+000 result=40 06:29:47 Config A/D Result=40 06:29:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:47 Get A/D filter: -9.255963e+061 result=40 06:29:47 Get A/D value=-858993460 result=40 06:29:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:47 Parameters OK 06:29:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:47 Set A/D data flow result=40 06:29:47 Set A/D channel type result=40 06:29:47 Set A/D encoding result=40 06:29:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:47 Set channel filter=0.000000e+000 result=40 06:29:47 Config A/D Result=40 06:29:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:47 Get A/D filter: -9.255963e+061 result=40 06:29:47 Get A/D value=-858993460 result=40 06:29:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:29:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:29:47 Aux= 06:29:47 Message to Camera, serial 133829 queued 06:30:23 Received message from Master: op=PointingHead serial=133841 06:30:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:30:23 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:30:23 Point started: ret=0 06:30:23 point_skyscan result=0 06:30:24 Check angles 06:30:24 SkyScan query 06:30:25 SkyScan query done: ret=0 az=134.715<-8981 ze=36.39<-9574 Statuses=0009 0009 06:30:25 Msec=0 True Az=134.715 Ze=36.39 Az status=0009 Ze status=0009 06:30:25 Check angles 06:30:25 SkyScan query 06:30:25 SkyScan query done: ret=0 az=117.24<-7816 ze=15.48<-10968 Statuses=0009 0009 06:30:25 Msec=750 True Az=117.24 Ze=15.48 Az status=0009 Ze status=0009 06:30:25 Check angles 06:30:25 SkyScan query 06:30:26 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.52<-12368 Statuses=0009 0009 06:30:26 Msec=1500 True Az=99.825 Ze=-5.52 Az status=0009 Ze status=0009 06:30:26 Check angles 06:30:26 SkyScan query 06:30:27 SkyScan query done: ret=0 az=82.005<-5467 ze=-26.97<-13798 Statuses=0009 0009 06:30:27 Msec=2250 True Az=82.005 Ze=-26.97 Az status=0009 Ze status=0009 06:30:27 Check angles 06:30:27 SkyScan query 06:30:28 SkyScan query done: ret=0 az=64.02<-4268 ze=-38.58<-14572 Statuses=0009 0008 06:30:28 Msec=3000 True Az=64.02 Ze=-38.58 Az status=0009 Ze status=0008 06:30:28 Check angles 06:30:28 SkyScan query 06:30:28 SkyScan query done: ret=0 az=46.65<-3110 ze=-38.52<-14568 Statuses=0009 0008 06:30:28 Msec=3750 True Az=46.65 Ze=-38.52 Az status=0009 Ze status=0008 06:30:29 Check angles 06:30:29 SkyScan query 06:30:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:30:29 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:30:29 Message to Master queued w/err=0: serial=133841 error=0 06:30:34 Received message from Master: op=Filter serial=133842 06:30:34 Color wheel filter change from 0 to 0 06:30:34 FLIGetFilterPos err=0 currentPosition=0 06:30:34 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:34 Filter is already there-color wheel unchanged 06:30:34 Received message from Master: op=Shutter serial=133843 06:30:34 Shutter LASER close 06:30:34 Received message from Camera: op=State serial=133845 06:30:34 GetSingleValue result=40 Value=cccccccc 06:30:34 SkyScan query 06:30:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:30:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:35 Parameters OK 06:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:35 Set A/D data flow result=40 06:30:35 Set A/D channel type result=40 06:30:35 Set A/D encoding result=40 06:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:35 Set channel filter=0.000000e+000 result=40 06:30:35 Config A/D Result=40 06:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:35 Get A/D filter: -9.255963e+061 result=40 06:30:35 Get A/D value=-858993460 result=40 06:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:35 Parameters OK 06:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:35 Set A/D data flow result=40 06:30:35 Set A/D channel type result=40 06:30:35 Set A/D encoding result=40 06:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:35 Set channel filter=0.000000e+000 result=40 06:30:35 Config A/D Result=40 06:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:35 Get A/D filter: -9.255963e+061 result=40 06:30:35 Get A/D value=-858993460 result=40 06:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:35 Aux= 06:30:35 Message to Camera, serial 133845 queued 06:31:12 Received message from Master: op=PointingHead serial=133858 06:31:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:31:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:31:12 Point started: ret=0 06:31:12 point_skyscan result=0 06:31:13 Check angles 06:31:13 SkyScan query 06:31:13 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.04<-16536 Statuses=0009 0009 06:31:13 Msec=0 True Az=63.78 Ze=-68.04 Az status=0009 Ze status=0009 06:31:14 Check angles 06:31:14 SkyScan query 06:31:14 SkyScan query done: ret=0 az=81.255<-5417 ze=-89.025<-17935 Statuses=0009 0009 06:31:14 Msec=750 True Az=81.255 Ze=-89.025 Az status=0009 Ze status=0009 06:31:14 Check angles 06:31:14 SkyScan query 06:31:15 SkyScan query done: ret=0 az=98.79<-6586 ze=-109.935<-19329 Statuses=0009 0009 06:31:15 Msec=1500 True Az=98.79 Ze=-109.935 Az status=0009 Ze status=0009 06:31:15 Check angles 06:31:15 SkyScan query 06:31:16 SkyScan query done: ret=0 az=116.16<-7744 ze=-130.92<-20728 Statuses=0009 0009 06:31:16 Msec=2250 True Az=116.16 Ze=-130.92 Az status=0009 Ze status=0009 06:31:16 Check angles 06:31:16 SkyScan query 06:31:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 06:31:16 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 06:31:17 Check angles 06:31:17 SkyScan query 06:31:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 06:31:17 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 06:31:17 Message to Master queued w/err=0: serial=133858 error=0 06:31:22 Received message from Master: op=Filter serial=133859 06:31:22 Color wheel filter change from 0 to 0 06:31:22 FLIGetFilterPos err=0 currentPosition=0 06:31:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:22 Filter is already there-color wheel unchanged 06:31:22 Received message from Master: op=Shutter serial=133860 06:31:22 Shutter LASER close 06:31:22 Received message from Camera: op=State serial=133862 06:31:22 GetSingleValue result=40 Value=cccccccc 06:31:22 SkyScan query 06:31:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:31:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:23 Parameters OK 06:31:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:23 Set A/D data flow result=40 06:31:23 Set A/D channel type result=40 06:31:23 Set A/D encoding result=40 06:31:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:23 Set channel filter=0.000000e+000 result=40 06:31:23 Config A/D Result=40 06:31:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:23 Get A/D filter: -9.255963e+061 result=40 06:31:23 Get A/D value=-858993460 result=40 06:31:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:23 Parameters OK 06:31:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:23 Set A/D data flow result=40 06:31:23 Set A/D channel type result=40 06:31:23 Set A/D encoding result=40 06:31:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:23 Set channel filter=0.000000e+000 result=40 06:31:23 Config A/D Result=40 06:31:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:23 Get A/D filter: -9.255963e+061 result=40 06:31:23 Get A/D value=-858993460 result=40 06:31:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:23 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:23 Aux= 06:31:23 Message to Camera, serial 133862 queued 06:32:00 Received message from Master: op=PointingHead serial=133875 06:32:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:32:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:32:00 Point started: ret=0 06:32:00 point_skyscan result=0 06:32:01 Check angles 06:32:01 SkyScan query 06:32:01 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 06:32:01 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 06:32:02 Check angles 06:32:02 SkyScan query 06:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:32:02 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:32:02 Message to Master queued w/err=0: serial=133875 error=0 06:32:07 Received message from Master: op=Filter serial=133876 06:32:07 Color wheel filter change from 0 to 0 06:32:07 FLIGetFilterPos err=0 currentPosition=0 06:32:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:07 Filter is already there-color wheel unchanged 06:32:07 Received message from Master: op=Shutter serial=133877 06:32:07 Shutter LASER open 06:32:08 Received message from Camera: op=State serial=133879 06:32:08 GetSingleValue result=40 Value=cccccccc 06:32:08 SkyScan query 06:32:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:32:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:08 Parameters OK 06:32:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:08 Set A/D data flow result=40 06:32:08 Set A/D channel type result=40 06:32:08 Set A/D encoding result=40 06:32:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:08 Set channel filter=0.000000e+000 result=40 06:32:08 Config A/D Result=40 06:32:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:08 Get A/D filter: -9.255963e+061 result=40 06:32:08 Get A/D value=-858993460 result=40 06:32:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:08 Parameters OK 06:32:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:08 Set A/D data flow result=40 06:32:08 Set A/D channel type result=40 06:32:08 Set A/D encoding result=40 06:32:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:08 Set channel filter=0.000000e+000 result=40 06:32:08 Config A/D Result=40 06:32:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:08 Get A/D filter: -9.255963e+061 result=40 06:32:08 Get A/D value=-858993460 result=40 06:32:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:08 Aux= 06:32:08 Message to Camera, serial 133879 queued 06:32:17 Received message from Master: op=Shutter serial=133889 06:32:17 Shutter LASER close 06:32:17 Received message from Master: op=PointingHead serial=133893 06:32:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:32:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:32:17 Point started: ret=0 06:32:17 point_skyscan result=0 06:32:18 Check angles 06:32:18 SkyScan query 06:32:19 SkyScan query done: ret=0 az=136.245<-9083 ze=-142.95<-21530 Statuses=0009 0009 06:32:19 Msec=0 True Az=136.245 Ze=-142.95 Az status=0009 Ze status=0009 06:32:19 Check angles 06:32:19 SkyScan query 06:32:20 SkyScan query done: ret=0 az=154.05<-10270 ze=-121.59<-20106 Statuses=0009 0009 06:32:20 Msec=750 True Az=154.05 Ze=-121.59 Az status=0009 Ze status=0009 06:32:20 Check angles 06:32:20 SkyScan query 06:32:20 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.53<-18702 Statuses=0009 0009 06:32:20 Msec=1500 True Az=171.525 Ze=-100.53 Az status=0009 Ze status=0009 06:32:20 Check angles 06:32:20 SkyScan query 06:32:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.635<-17309 Statuses=0008 0009 06:32:21 Msec=2250 True Az=176.01 Ze=-79.635 Az status=0008 Ze status=0009 06:32:21 Check angles 06:32:21 SkyScan query 06:32:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.665<-15911 Statuses=0008 0009 06:32:22 Msec=3000 True Az=176.01 Ze=-58.665 Az status=0008 Ze status=0009 06:32:22 Check angles 06:32:22 SkyScan query 06:32:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:32:23 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:32:23 Message to Master queued w/err=0: serial=133893 error=0 06:32:28 Received message from Master: op=Filter serial=133894 06:32:28 Color wheel filter change from 0 to 0 06:32:28 FLIGetFilterPos err=0 currentPosition=0 06:32:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:28 Filter is already there-color wheel unchanged 06:32:28 Received message from Master: op=Shutter serial=133895 06:32:28 Shutter LASER close 06:32:28 Received message from Camera: op=State serial=133897 06:32:28 GetSingleValue result=40 Value=cccccccc 06:32:28 SkyScan query 06:32:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:32:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:28 Parameters OK 06:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:28 Set A/D data flow result=40 06:32:28 Set A/D channel type result=40 06:32:28 Set A/D encoding result=40 06:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:28 Set channel filter=0.000000e+000 result=40 06:32:28 Config A/D Result=40 06:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:28 Get A/D filter: -9.255963e+061 result=40 06:32:28 Get A/D value=-858993460 result=40 06:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:28 Parameters OK 06:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:28 Set A/D data flow result=40 06:32:28 Set A/D channel type result=40 06:32:28 Set A/D encoding result=40 06:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:28 Set channel filter=0.000000e+000 result=40 06:32:28 Config A/D Result=40 06:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:28 Get A/D filter: -9.255963e+061 result=40 06:32:28 Get A/D value=-858993460 result=40 06:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:28 Aux= 06:32:28 Message to Camera, serial 133897 queued 06:33:04 Received message from Master: op=PointingHead serial=133909 06:33:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:33:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:33:05 Point started: ret=0 06:33:05 point_skyscan result=0 06:33:05 Check angles 06:33:05 SkyScan query 06:33:06 SkyScan query done: ret=0 az=152.85<-10190 ze=-21.54<-13436 Statuses=0009 0009 06:33:06 Msec=0 True Az=152.85 Ze=-21.54 Az status=0009 Ze status=0009 06:33:06 Check angles 06:33:06 SkyScan query 06:33:07 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.57<-12038 Statuses=0009 0009 06:33:07 Msec=750 True Az=135.345 Ze=-0.57 Az status=0009 Ze status=0009 06:33:07 Check angles 06:33:07 SkyScan query 06:33:08 SkyScan query done: ret=0 az=117.78<-7852 ze=20.37<-10642 Statuses=0009 0009 06:33:08 Msec=1500 True Az=117.78 Ze=20.37 Az status=0009 Ze status=0009 06:33:08 Check angles 06:33:08 SkyScan query 06:33:08 SkyScan query done: ret=0 az=100.08<-6672 ze=41.76<-9216 Statuses=0009 0009 06:33:08 Msec=2250 True Az=100.08 Ze=41.76 Az status=0009 Ze status=0009 06:33:08 Check angles 06:33:08 SkyScan query 06:33:09 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 06:33:09 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 06:33:09 Check angles 06:33:09 SkyScan query 06:33:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:33:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:33:10 Message to Master queued w/err=0: serial=133909 error=0 06:33:15 Received message from Master: op=Filter serial=133910 06:33:15 Color wheel filter change from 0 to 0 06:33:15 FLIGetFilterPos err=0 currentPosition=0 06:33:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:15 Filter is already there-color wheel unchanged 06:33:15 Received message from Master: op=Shutter serial=133911 06:33:15 Shutter LASER close 06:33:15 Received message from Camera: op=State serial=133913 06:33:15 GetSingleValue result=40 Value=cccccccc 06:33:15 SkyScan query 06:33:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:33:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:16 Parameters OK 06:33:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:16 Set A/D data flow result=40 06:33:16 Set A/D channel type result=40 06:33:16 Set A/D encoding result=40 06:33:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:16 Set channel filter=0.000000e+000 result=40 06:33:16 Config A/D Result=40 06:33:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:16 Get A/D filter: -9.255963e+061 result=40 06:33:16 Get A/D value=-858993460 result=40 06:33:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:16 Parameters OK 06:33:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:16 Set A/D data flow result=40 06:33:16 Set A/D channel type result=40 06:33:16 Set A/D encoding result=40 06:33:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:16 Set channel filter=0.000000e+000 result=40 06:33:16 Config A/D Result=40 06:33:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:16 Get A/D filter: -9.255963e+061 result=40 06:33:16 Get A/D value=-858993460 result=40 06:33:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:16 Aux= 06:33:16 Message to Camera, serial 133913 queued 06:33:52 Received message from Master: op=PointingHead serial=133926 06:33:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:33:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:33:53 Point started: ret=0 06:33:53 point_skyscan result=0 06:33:54 Check angles 06:33:54 SkyScan query 06:33:54 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 06:33:54 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 06:33:54 Check angles 06:33:54 SkyScan query 06:33:55 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 06:33:55 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 06:33:55 Check angles 06:33:55 SkyScan query 06:33:56 SkyScan query done: ret=0 az=144.105<-9607 ze=38.505<-9433 Statuses=0009 0008 06:33:56 Msec=1500 True Az=144.105 Ze=38.505 Az status=0009 Ze status=0008 06:33:56 Check angles 06:33:56 SkyScan query 06:33:56 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 06:33:56 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 06:33:57 Check angles 06:33:57 SkyScan query 06:33:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:33:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:33:57 Check angles 06:33:57 SkyScan query 06:33:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:33:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:33:58 Message to Master queued w/err=0: serial=133926 error=0 06:34:03 Received message from Master: op=Filter serial=133927 06:34:03 Color wheel filter change from 0 to 0 06:34:03 FLIGetFilterPos err=0 currentPosition=0 06:34:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:03 Filter is already there-color wheel unchanged 06:34:03 Received message from Master: op=Shutter serial=133928 06:34:03 Shutter LASER close 06:34:03 Received message from Camera: op=State serial=133930 06:34:03 GetSingleValue result=40 Value=cccccccc 06:34:03 SkyScan query 06:34:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:34:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:04 Parameters OK 06:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:04 Set A/D data flow result=40 06:34:04 Set A/D channel type result=40 06:34:04 Set A/D encoding result=40 06:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:04 Set channel filter=0.000000e+000 result=40 06:34:04 Config A/D Result=40 06:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:04 Get A/D filter: -9.255963e+061 result=40 06:34:04 Get A/D value=-858993460 result=40 06:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:04 Parameters OK 06:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:04 Set A/D data flow result=40 06:34:04 Set A/D channel type result=40 06:34:04 Set A/D encoding result=40 06:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:04 Set channel filter=0.000000e+000 result=40 06:34:04 Config A/D Result=40 06:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:04 Get A/D filter: -9.255963e+061 result=40 06:34:04 Get A/D value=-858993460 result=40 06:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:04 Aux= 06:34:04 Message to Camera, serial 133930 queued 06:34:41 Received message from Master: op=PointingHead serial=133943 06:34:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:34:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:34:41 Point started: ret=0 06:34:41 point_skyscan result=0 06:34:42 Check angles 06:34:42 SkyScan query 06:34:42 SkyScan query done: ret=0 az=152.925<-10195 ze=8.85<-11410 Statuses=0009 0009 06:34:42 Msec=0 True Az=152.925 Ze=8.85 Az status=0009 Ze status=0009 06:34:42 Check angles 06:34:42 SkyScan query 06:34:43 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.18<-12812 Statuses=0009 0009 06:34:43 Msec=750 True Az=135.345 Ze=-12.18 Az status=0009 Ze status=0009 06:34:43 Check angles 06:34:43 SkyScan query 06:34:44 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.54<-14236 Statuses=0009 0009 06:34:44 Msec=1500 True Az=117.6 Ze=-33.54 Az status=0009 Ze status=0009 06:34:44 Check angles 06:34:44 SkyScan query 06:34:44 SkyScan query done: ret=0 az=99.75<-6650 ze=-51.57<-15438 Statuses=0009 0009 06:34:44 Msec=2250 True Az=99.75 Ze=-51.57 Az status=0009 Ze status=0009 06:34:45 Check angles 06:34:45 SkyScan query 06:34:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 06:34:45 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 06:34:45 Check angles 06:34:45 SkyScan query 06:34:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:34:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:34:46 Message to Master queued w/err=0: serial=133943 error=0 06:34:51 Received message from Master: op=Filter serial=133944 06:34:51 Color wheel filter change from 0 to 0 06:34:51 FLIGetFilterPos err=0 currentPosition=0 06:34:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:51 Filter is already there-color wheel unchanged 06:34:51 Received message from Master: op=Shutter serial=133945 06:34:51 Shutter LASER close 06:34:51 Received message from Camera: op=State serial=133947 06:34:51 GetSingleValue result=40 Value=cccccccc 06:34:51 SkyScan query 06:34:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:34:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:52 Parameters OK 06:34:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:52 Set A/D data flow result=40 06:34:52 Set A/D channel type result=40 06:34:52 Set A/D encoding result=40 06:34:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:52 Set channel filter=0.000000e+000 result=40 06:34:52 Config A/D Result=40 06:34:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:52 Get A/D filter: -9.255963e+061 result=40 06:34:52 Get A/D value=-858993460 result=40 06:34:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:52 Parameters OK 06:34:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:52 Set A/D data flow result=40 06:34:52 Set A/D channel type result=40 06:34:52 Set A/D encoding result=40 06:34:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:52 Set channel filter=0.000000e+000 result=40 06:34:52 Config A/D Result=40 06:34:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:52 Get A/D filter: -9.255963e+061 result=40 06:34:52 Get A/D value=-858993460 result=40 06:34:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:52 Aux= 06:34:52 Message to Camera, serial 133947 queued 06:35:29 Received message from Master: op=PointingHead serial=133960 06:35:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:35:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:35:29 Point started: ret=0 06:35:29 point_skyscan result=0 06:35:30 Check angles 06:35:30 SkyScan query 06:35:30 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.105<-17407 Statuses=0009 0009 06:35:30 Msec=0 True Az=108.87 Ze=-81.105 Az status=0009 Ze status=0009 06:35:30 Check angles 06:35:30 SkyScan query 06:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 06:35:31 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 06:35:31 Check angles 06:35:31 SkyScan query 06:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 06:35:32 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 06:35:32 Check angles 06:35:32 SkyScan query 06:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.985<-21599 Statuses=0008 0009 06:35:33 Msec=2250 True Az=112.995 Ze=-143.985 Az status=0008 Ze status=0009 06:35:33 Check angles 06:35:33 SkyScan query 06:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.91<-22994 Statuses=0008 0009 06:35:33 Msec=3000 True Az=112.995 Ze=-164.91 Az status=0008 Ze status=0009 06:35:33 Check angles 06:35:33 SkyScan query 06:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:35:34 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:35:34 Message to Master queued w/err=0: serial=133960 error=0 06:35:39 Received message from Master: op=Filter serial=133961 06:35:39 Color wheel filter change from 0 to 0 06:35:39 FLIGetFilterPos err=0 currentPosition=0 06:35:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:39 Filter is already there-color wheel unchanged 06:35:39 Received message from Master: op=Shutter serial=133962 06:35:39 Shutter LASER open 06:35:39 Received message from Camera: op=State serial=133964 06:35:39 GetSingleValue result=40 Value=cccccccc 06:35:39 SkyScan query 06:35:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:35:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:40 Parameters OK 06:35:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:40 Set A/D data flow result=40 06:35:40 Set A/D channel type result=40 06:35:40 Set A/D encoding result=40 06:35:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:40 Set channel filter=0.000000e+000 result=40 06:35:40 Config A/D Result=40 06:35:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:40 Get A/D filter: -9.255963e+061 result=40 06:35:40 Get A/D value=-858993460 result=40 06:35:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:40 Parameters OK 06:35:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:40 Set A/D data flow result=40 06:35:40 Set A/D channel type result=40 06:35:40 Set A/D encoding result=40 06:35:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:40 Set channel filter=0.000000e+000 result=40 06:35:40 Config A/D Result=40 06:35:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:40 Get A/D filter: -9.255963e+061 result=40 06:35:40 Get A/D value=-858993460 result=40 06:35:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:40 Aux= 06:35:40 Message to Camera, serial 133964 queued 06:35:48 Received message from Master: op=Shutter serial=133974 06:35:48 Shutter LASER close 06:35:49 Received message from Master: op=PointingHead serial=133978 06:35:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:35:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:35:49 Point started: ret=0 06:35:49 point_skyscan result=0 06:35:50 Check angles 06:35:50 SkyScan query 06:35:50 SkyScan query done: ret=0 az=89.79<-5986 ze=157.02<-1532 Statuses=0009 0009 06:35:50 Msec=0 True Az=89.79 Ze=157.02 Az status=0009 Ze status=0009 06:35:51 Check angles 06:35:51 SkyScan query 06:35:51 SkyScan query done: ret=0 az=72.21<-4814 ze=136.08<-2928 Statuses=0009 0009 06:35:51 Msec=750 True Az=72.21 Ze=136.08 Az status=0009 Ze status=0009 06:35:51 Check angles 06:35:51 SkyScan query 06:35:52 SkyScan query done: ret=0 az=54.795<-3653 ze=115.14<-4324 Statuses=0009 0009 06:35:52 Msec=1500 True Az=54.795 Ze=115.14 Az status=0009 Ze status=0009 06:35:52 Check angles [UTC 2018-12-14 06:35:52] 06:35:52 SkyScan query 06:35:53 SkyScan query done: ret=0 az=40.995<-2733 ze=92.415<-5839 Statuses=0009 0009 06:35:53 Msec=2250 True Az=40.995 Ze=92.415 Az status=0009 Ze status=0009 [UTC 2018-12-14 06:35:53] 06:35:53 Check angles 06:35:53 SkyScan query 06:35:53 SkyScan query done: ret=0 az=40.995<-2733 ze=73.2<-7120 Statuses=0008 0009 06:35:53 Msec=3000 True Az=40.995 Ze=73.2 Az status=0008 Ze status=0009 06:35:54 Check angles 06:35:54 SkyScan query 06:35:54 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 06:35:54 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 06:35:54 Check angles 06:35:54 SkyScan query 06:35:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:35:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:35:55 Message to Master queued w/err=0: serial=133978 error=0 06:36:00 Received message from Master: op=Filter serial=133979 06:36:00 Color wheel filter change from 0 to 0 06:36:00 FLIGetFilterPos err=0 currentPosition=0 06:36:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:00 Filter is already there-color wheel unchanged 06:36:00 Received message from Master: op=Shutter serial=133980 06:36:00 Shutter LASER close 06:36:00 Received message from Camera: op=State serial=133982 06:36:00 GetSingleValue result=40 Value=cccccccc 06:36:00 SkyScan query 06:36:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:36:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:01 Parameters OK 06:36:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:01 Set A/D data flow result=40 06:36:01 Set A/D channel type result=40 06:36:01 Set A/D encoding result=40 06:36:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:01 Set channel filter=0.000000e+000 result=40 06:36:01 Config A/D Result=40 06:36:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:01 Get A/D filter: -9.255963e+061 result=40 06:36:01 Get A/D value=-858993460 result=40 06:36:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:01 Parameters OK 06:36:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:01 Set A/D data flow result=40 06:36:01 Set A/D channel type result=40 06:36:01 Set A/D encoding result=40 06:36:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:01 Set channel filter=0.000000e+000 result=40 06:36:01 Config A/D Result=40 06:36:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:01 Get A/D filter: -9.255963e+061 result=40 06:36:01 Get A/D value=-858993460 result=40 06:36:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:01 Aux= 06:36:01 Message to Camera, serial 133982 queued 06:36:38 Received message from Master: op=PointingHead serial=133995 06:36:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:36:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:36:38 Point started: ret=0 06:36:38 point_skyscan result=0 06:36:39 Check angles 06:36:39 SkyScan query 06:36:39 SkyScan query done: ret=0 az=64.335<-4289 ze=66.54<-7564 Statuses=0009 0008 06:36:39 Msec=0 True Az=64.335 Ze=66.54 Az status=0009 Ze status=0008 06:36:40 Check angles 06:36:40 SkyScan query 06:36:40 SkyScan query done: ret=0 az=82.305<-5487 ze=66.51<-7566 Statuses=0009 0008 06:36:40 Msec=750 True Az=82.305 Ze=66.51 Az status=0009 Ze status=0008 06:36:40 Check angles 06:36:40 SkyScan query 06:36:41 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 06:36:41 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 06:36:41 Check angles 06:36:41 SkyScan query 06:36:42 SkyScan query done: ret=0 az=117.105<-7807 ze=66.495<-7567 Statuses=0009 0008 06:36:42 Msec=2250 True Az=117.105 Ze=66.495 Az status=0009 Ze status=0008 06:36:42 Check angles 06:36:42 SkyScan query 06:36:42 SkyScan query done: ret=0 az=135.015<-9001 ze=66.495<-7567 Statuses=0009 0008 06:36:42 Msec=3000 True Az=135.015 Ze=66.495 Az status=0009 Ze status=0008 06:36:43 Check angles 06:36:43 SkyScan query 06:36:43 SkyScan query done: ret=0 az=152.79<-10186 ze=66.495<-7567 Statuses=0009 0008 06:36:43 Msec=3750 True Az=152.79 Ze=66.495 Az status=0009 Ze status=0008 06:36:43 Check angles 06:36:43 SkyScan query 06:36:44 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 06:36:44 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 06:36:44 Message to Master queued w/err=0: serial=133995 error=0 06:36:49 Received message from Master: op=Filter serial=133996 06:36:49 Color wheel filter change from 0 to 0 06:36:49 FLIGetFilterPos err=0 currentPosition=0 06:36:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:49 Filter is already there-color wheel unchanged 06:36:49 Received message from Master: op=Shutter serial=133997 06:36:49 Shutter LASER close 06:36:49 Received message from Camera: op=State serial=133999 06:36:49 GetSingleValue result=40 Value=cccccccc 06:36:49 SkyScan query 06:36:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:36:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:50 Parameters OK 06:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:50 Set A/D data flow result=40 06:36:50 Set A/D channel type result=40 06:36:50 Set A/D encoding result=40 06:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:50 Set channel filter=0.000000e+000 result=40 06:36:50 Config A/D Result=40 06:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:50 Get A/D filter: -9.255963e+061 result=40 06:36:50 Get A/D value=-858993460 result=40 06:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:50 Parameters OK 06:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:50 Set A/D data flow result=40 06:36:50 Set A/D channel type result=40 06:36:50 Set A/D encoding result=40 06:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:50 Set channel filter=0.000000e+000 result=40 06:36:50 Config A/D Result=40 06:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:50 Get A/D filter: -9.255963e+061 result=40 06:36:50 Get A/D value=-858993460 result=40 06:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:50 Aux= 06:36:50 Message to Camera, serial 133999 queued 06:37:27 Received message from Master: op=PointingHead serial=134012 06:37:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:37:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:37:27 Point started: ret=0 06:37:27 point_skyscan result=0 06:37:28 Check angles 06:37:28 SkyScan query 06:37:28 SkyScan query done: ret=0 az=134.745<-8983 ze=36.48<-9568 Statuses=0009 0009 06:37:28 Msec=0 True Az=134.745 Ze=36.48 Az status=0009 Ze status=0009 06:37:28 Check angles 06:37:28 SkyScan query 06:37:29 SkyScan query done: ret=0 az=117.255<-7817 ze=15.555<-10963 Statuses=0009 0009 06:37:29 Msec=750 True Az=117.255 Ze=15.555 Az status=0009 Ze status=0009 06:37:29 Check angles 06:37:29 SkyScan query 06:37:30 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.475<-12365 Statuses=0009 0009 06:37:30 Msec=1500 True Az=99.855 Ze=-5.475 Az status=0009 Ze status=0009 06:37:30 Check angles 06:37:30 SkyScan query 06:37:31 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.895<-13793 Statuses=0009 0009 06:37:31 Msec=2250 True Az=82.05 Ze=-26.895 Az status=0009 Ze status=0009 06:37:31 Check angles 06:37:31 SkyScan query 06:37:31 SkyScan query done: ret=0 az=64.155<-4277 ze=-38.58<-14572 Statuses=0009 0008 06:37:31 Msec=3000 True Az=64.155 Ze=-38.58 Az status=0009 Ze status=0008 06:37:32 Check angles 06:37:32 SkyScan query 06:37:32 SkyScan query done: ret=0 az=46.635<-3109 ze=-38.52<-14568 Statuses=0009 0008 06:37:32 Msec=3750 True Az=46.635 Ze=-38.52 Az status=0009 Ze status=0008 06:37:32 Check angles 06:37:32 SkyScan query 06:37:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:37:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:37:33 Message to Master queued w/err=0: serial=134012 error=0 06:37:38 Received message from Master: op=Filter serial=134013 06:37:38 Color wheel filter change from 0 to 0 06:37:38 FLIGetFilterPos err=0 currentPosition=0 06:37:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:38 Filter is already there-color wheel unchanged 06:37:38 Received message from Master: op=Shutter serial=134014 06:37:38 Shutter LASER close 06:37:38 Received message from Camera: op=State serial=134016 06:37:38 GetSingleValue result=40 Value=cccccccc 06:37:38 SkyScan query 06:37:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:37:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:39 Parameters OK 06:37:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:39 Set A/D data flow result=40 06:37:39 Set A/D channel type result=40 06:37:39 Set A/D encoding result=40 06:37:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:39 Set channel filter=0.000000e+000 result=40 06:37:39 Config A/D Result=40 06:37:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:39 Get A/D filter: -9.255963e+061 result=40 06:37:39 Get A/D value=-858993460 result=40 06:37:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:39 Parameters OK 06:37:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:39 Set A/D data flow result=40 06:37:39 Set A/D channel type result=40 06:37:39 Set A/D encoding result=40 06:37:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:39 Set channel filter=0.000000e+000 result=40 06:37:39 Config A/D Result=40 06:37:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:39 Get A/D filter: -9.255963e+061 result=40 06:37:39 Get A/D value=-858993460 result=40 06:37:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:39 Aux= 06:37:39 Message to Camera, serial 134016 queued 06:38:15 Received message from Master: op=PointingHead serial=134028 06:38:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:38:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:38:15 Point started: ret=0 06:38:15 point_skyscan result=0 06:38:16 Check angles 06:38:16 SkyScan query 06:38:16 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.31<-16554 Statuses=0009 0009 06:38:16 Msec=0 True Az=64.005 Ze=-68.31 Az status=0009 Ze status=0009 06:38:16 Check angles 06:38:16 SkyScan query 06:38:17 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.715<-17981 Statuses=0009 0009 06:38:17 Msec=750 True Az=81.855 Ze=-89.715 Az status=0009 Ze status=0009 06:38:17 Check angles 06:38:17 SkyScan query 06:38:18 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.67<-19378 Statuses=0009 0009 06:38:18 Msec=1500 True Az=99.405 Ze=-110.67 Az status=0009 Ze status=0009 06:38:18 Check angles 06:38:18 SkyScan query 06:38:18 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.565<-20771 Statuses=0009 0009 06:38:18 Msec=2250 True Az=116.82 Ze=-131.565 Az status=0009 Ze status=0009 06:38:19 Check angles 06:38:19 SkyScan query 06:38:19 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 06:38:19 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 06:38:19 Check angles 06:38:19 SkyScan query 06:38:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 06:38:20 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 06:38:20 Message to Master queued w/err=0: serial=134028 error=0 06:38:25 Received message from Master: op=Filter serial=134029 06:38:25 Color wheel filter change from 0 to 0 06:38:25 FLIGetFilterPos err=0 currentPosition=0 06:38:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:25 Filter is already there-color wheel unchanged 06:38:25 Received message from Master: op=Shutter serial=134030 06:38:25 Shutter LASER close 06:38:25 Received message from Camera: op=State serial=134032 06:38:25 GetSingleValue result=40 Value=cccccccc 06:38:25 SkyScan query 06:38:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:38:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:26 Parameters OK 06:38:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:26 Set A/D data flow result=40 06:38:26 Set A/D channel type result=40 06:38:26 Set A/D encoding result=40 06:38:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:26 Set channel filter=0.000000e+000 result=40 06:38:26 Config A/D Result=40 06:38:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:26 Get A/D filter: -9.255963e+061 result=40 06:38:26 Get A/D value=-858993460 result=40 06:38:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:26 Parameters OK 06:38:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:26 Set A/D data flow result=40 06:38:26 Set A/D channel type result=40 06:38:26 Set A/D encoding result=40 06:38:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:26 Set channel filter=0.000000e+000 result=40 06:38:26 Config A/D Result=40 06:38:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:26 Get A/D filter: -9.255963e+061 result=40 06:38:26 Get A/D value=-858993460 result=40 06:38:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:26 Aux= 06:38:26 Message to Camera, serial 134032 queued 06:39:03 Received message from Master: op=PointingHead serial=134045 06:39:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:39:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:39:03 Point started: ret=0 06:39:03 point_skyscan result=0 06:39:04 Check angles 06:39:04 SkyScan query 06:39:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0008 0009 06:39:04 Msec=0 True Az=112.995 Ze=-171.525 Az status=0008 Ze status=0009 06:39:05 Check angles 06:39:05 SkyScan query 06:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:39:05 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:39:05 Message to Master queued w/err=0: serial=134045 error=0 06:39:10 Received message from Master: op=Filter serial=134046 06:39:10 Color wheel filter change from 0 to 0 06:39:10 FLIGetFilterPos err=0 currentPosition=0 06:39:10 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:10 Filter is already there-color wheel unchanged 06:39:10 Received message from Master: op=Shutter serial=134047 06:39:10 Shutter LASER open 06:39:10 Received message from Camera: op=State serial=134049 06:39:10 GetSingleValue result=40 Value=cccccccc 06:39:10 SkyScan query 06:39:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:39:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:11 Parameters OK 06:39:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:11 Set A/D data flow result=40 06:39:11 Set A/D channel type result=40 06:39:11 Set A/D encoding result=40 06:39:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:11 Set channel filter=0.000000e+000 result=40 06:39:11 Config A/D Result=40 06:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:11 Get A/D filter: -9.255963e+061 result=40 06:39:11 Get A/D value=-858993460 result=40 06:39:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:11 Parameters OK 06:39:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:11 Set A/D data flow result=40 06:39:11 Set A/D channel type result=40 06:39:11 Set A/D encoding result=40 06:39:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:11 Set channel filter=0.000000e+000 result=40 06:39:11 Config A/D Result=40 06:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:11 Get A/D filter: -9.255963e+061 result=40 06:39:11 Get A/D value=-858993460 result=40 06:39:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:11 Aux= 06:39:11 Message to Camera, serial 134049 queued 06:39:19 Received message from Master: op=Shutter serial=134059 06:39:19 Shutter LASER close 06:39:20 Received message from Master: op=PointingHead serial=134063 06:39:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:39:20 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:39:20 Point started: ret=0 06:39:20 point_skyscan result=0 06:39:21 Check angles 06:39:21 SkyScan query 06:39:22 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.16<-21544 Statuses=0009 0009 06:39:22 Msec=0 True Az=136.02 Ze=-143.16 Az status=0009 Ze status=0009 06:39:22 Check angles 06:39:22 SkyScan query 06:39:22 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.19<-20146 Statuses=0009 0009 06:39:22 Msec=750 True Az=153.54 Ze=-122.19 Az status=0009 Ze status=0009 06:39:23 Check angles 06:39:23 SkyScan query 06:39:23 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.74<-18716 Statuses=0009 0009 06:39:23 Msec=1500 True Az=171.45 Ze=-100.74 Az status=0009 Ze status=0009 06:39:23 Check angles 06:39:23 SkyScan query 06:39:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.875<-17325 Statuses=0008 0009 06:39:24 Msec=2250 True Az=176.01 Ze=-79.875 Az status=0008 Ze status=0009 06:39:24 Check angles 06:39:24 SkyScan query 06:39:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.86<-15924 Statuses=0008 0009 06:39:25 Msec=3000 True Az=176.01 Ze=-58.86 Az status=0008 Ze status=0009 06:39:25 Check angles 06:39:25 SkyScan query 06:39:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:39:26 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:39:26 Message to Master queued w/err=0: serial=134063 error=0 06:39:31 Received message from Master: op=Filter serial=134064 06:39:31 Color wheel filter change from 0 to 0 06:39:31 FLIGetFilterPos err=0 currentPosition=0 06:39:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:31 Filter is already there-color wheel unchanged 06:39:31 Received message from Master: op=Shutter serial=134065 06:39:31 Shutter LASER close 06:39:31 Received message from Camera: op=State serial=134067 06:39:31 GetSingleValue result=40 Value=cccccccc 06:39:31 SkyScan query 06:39:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:39:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:31 Parameters OK 06:39:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:31 Set A/D data flow result=40 06:39:31 Set A/D channel type result=40 06:39:31 Set A/D encoding result=40 06:39:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:31 Set channel filter=0.000000e+000 result=40 06:39:31 Config A/D Result=40 06:39:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:31 Get A/D filter: -9.255963e+061 result=40 06:39:31 Get A/D value=-858993460 result=40 06:39:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:31 Parameters OK 06:39:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:31 Set A/D data flow result=40 06:39:31 Set A/D channel type result=40 06:39:31 Set A/D encoding result=40 06:39:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:31 Set channel filter=0.000000e+000 result=40 06:39:31 Config A/D Result=40 06:39:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:31 Get A/D filter: -9.255963e+061 result=40 06:39:31 Get A/D value=-858993460 result=40 06:39:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:31 Aux= 06:39:31 Message to Camera, serial 134067 queued 06:40:08 Received message from Master: op=PointingHead serial=134080 06:40:08 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:40:08 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:40:09 Point started: ret=0 06:40:09 point_skyscan result=0 06:40:09 Check angles 06:40:09 SkyScan query 06:40:10 SkyScan query done: ret=0 az=152.595<-10173 ze=-21.12<-13408 Statuses=0009 0009 06:40:10 Msec=0 True Az=152.595 Ze=-21.12 Az status=0009 Ze status=0009 06:40:10 Check angles 06:40:10 SkyScan query 06:40:11 SkyScan query done: ret=0 az=134.58<-8972 ze=0.225<-11985 Statuses=0009 0009 06:40:11 Msec=750 True Az=134.58 Ze=0.225 Az status=0009 Ze status=0009 06:40:11 Check angles 06:40:11 SkyScan query 06:40:11 SkyScan query done: ret=0 az=117.135<-7809 ze=21.225<-10585 Statuses=0009 0009 06:40:11 Msec=1500 True Az=117.135 Ze=21.225 Az status=0009 Ze status=0009 06:40:12 Check angles 06:40:12 SkyScan query 06:40:12 SkyScan query done: ret=0 az=99.405<-6627 ze=42.54<-9164 Statuses=0009 0009 06:40:12 Msec=2250 True Az=99.405 Ze=42.54 Az status=0009 Ze status=0009 06:40:12 Check angles 06:40:12 SkyScan query 06:40:13 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 06:40:13 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 06:40:13 Check angles 06:40:13 SkyScan query 06:40:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:40:14 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:40:14 Message to Master queued w/err=0: serial=134080 error=0 06:40:19 Received message from Master: op=Filter serial=134081 06:40:19 Color wheel filter change from 0 to 0 06:40:19 FLIGetFilterPos err=0 currentPosition=0 06:40:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:19 Filter is already there-color wheel unchanged 06:40:19 Received message from Master: op=Shutter serial=134082 06:40:19 Shutter LASER close 06:40:19 Received message from Camera: op=State serial=134084 06:40:19 GetSingleValue result=40 Value=cccccccc 06:40:19 SkyScan query 06:40:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:40:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:20 Parameters OK 06:40:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:20 Set A/D data flow result=40 06:40:20 Set A/D channel type result=40 06:40:20 Set A/D encoding result=40 06:40:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:20 Set channel filter=0.000000e+000 result=40 06:40:20 Config A/D Result=40 06:40:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:20 Get A/D filter: -9.255963e+061 result=40 06:40:20 Get A/D value=-858993460 result=40 06:40:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:20 Parameters OK 06:40:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:20 Set A/D data flow result=40 06:40:20 Set A/D channel type result=40 06:40:20 Set A/D encoding result=40 06:40:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:20 Set channel filter=0.000000e+000 result=40 06:40:20 Config A/D Result=40 06:40:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:20 Get A/D filter: -9.255963e+061 result=40 06:40:20 Get A/D value=-858993460 result=40 06:40:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:20 Aux= 06:40:20 Message to Camera, serial 134084 queued 06:40:56 Received message from Master: op=PointingHead serial=134097 06:40:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:40:56 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:40:57 Point started: ret=0 06:40:57 point_skyscan result=0 06:40:57 Check angles 06:40:57 SkyScan query 06:40:58 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 06:40:58 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 06:40:58 Check angles 06:40:58 SkyScan query 06:40:59 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 06:40:59 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 06:40:59 Check angles 06:40:59 SkyScan query 06:41:00 SkyScan query done: ret=0 az=143.88<-9592 ze=38.505<-9433 Statuses=0009 0008 06:41:00 Msec=1500 True Az=143.88 Ze=38.505 Az status=0009 Ze status=0008 06:41:00 Check angles 06:41:00 SkyScan query 06:41:00 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 06:41:00 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 06:41:00 Check angles 06:41:00 SkyScan query 06:41:01 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:41:01 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:41:01 Check angles 06:41:01 SkyScan query 06:41:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:41:02 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:41:02 Message to Master queued w/err=0: serial=134097 error=0 06:41:07 Received message from Master: op=Filter serial=134098 06:41:07 Color wheel filter change from 0 to 0 06:41:07 FLIGetFilterPos err=0 currentPosition=0 06:41:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:07 Filter is already there-color wheel unchanged 06:41:07 Received message from Master: op=Shutter serial=134099 06:41:07 Shutter LASER close 06:41:07 Received message from Camera: op=State serial=134101 06:41:07 GetSingleValue result=40 Value=cccccccc 06:41:07 SkyScan query 06:41:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:41:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:08 Parameters OK 06:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:08 Set A/D data flow result=40 06:41:08 Set A/D channel type result=40 06:41:08 Set A/D encoding result=40 06:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:08 Set channel filter=0.000000e+000 result=40 06:41:08 Config A/D Result=40 06:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:08 Get A/D filter: -9.255963e+061 result=40 06:41:08 Get A/D value=-858993460 result=40 06:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:08 Parameters OK 06:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:08 Set A/D data flow result=40 06:41:08 Set A/D channel type result=40 06:41:08 Set A/D encoding result=40 06:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:08 Set channel filter=0.000000e+000 result=40 06:41:08 Config A/D Result=40 06:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:08 Get A/D filter: -9.255963e+061 result=40 06:41:08 Get A/D value=-858993460 result=40 06:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:08 Aux= 06:41:08 Message to Camera, serial 134101 queued 06:41:44 Received message from Master: op=PointingHead serial=134114 06:41:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:41:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:41:45 Point started: ret=0 06:41:45 point_skyscan result=0 06:41:46 Check angles 06:41:46 SkyScan query 06:41:46 SkyScan query done: ret=0 az=152.775<-10185 ze=8.445<-11437 Statuses=0009 0009 06:41:46 Msec=0 True Az=152.775 Ze=8.445 Az status=0009 Ze status=0009 06:41:46 Check angles 06:41:46 SkyScan query 06:41:47 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.45<-12830 Statuses=0009 0009 06:41:47 Msec=750 True Az=135.405 Ze=-12.45 Az status=0009 Ze status=0009 06:41:47 Check angles 06:41:47 SkyScan query 06:41:48 SkyScan query done: ret=0 az=117.465<-7831 ze=-33.9<-14260 Statuses=0009 0009 06:41:48 Msec=1500 True Az=117.465 Ze=-33.9 Az status=0009 Ze status=0009 06:41:48 Check angles 06:41:48 SkyScan query 06:41:48 SkyScan query done: ret=0 az=100.11<-6674 ze=-51.57<-15438 Statuses=0009 0009 06:41:48 Msec=2250 True Az=100.11 Ze=-51.57 Az status=0009 Ze status=0009 06:41:49 Check angles 06:41:49 SkyScan query 06:41:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 06:41:49 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 06:41:49 Check angles 06:41:49 SkyScan query 06:41:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:41:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:41:50 Message to Master queued w/err=0: serial=134114 error=0 06:41:55 Received message from Master: op=Filter serial=134115 06:41:55 Color wheel filter change from 0 to 0 06:41:55 FLIGetFilterPos err=0 currentPosition=0 06:41:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:55 Filter is already there-color wheel unchanged 06:41:55 Received message from Master: op=Shutter serial=134116 06:41:55 Shutter LASER close 06:41:55 Received message from Camera: op=State serial=134118 06:41:55 GetSingleValue result=40 Value=cccccccc 06:41:55 SkyScan query 06:41:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:41:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:56 Parameters OK 06:41:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:56 Set A/D data flow result=40 06:41:56 Set A/D channel type result=40 06:41:56 Set A/D encoding result=40 06:41:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:56 Set channel filter=0.000000e+000 result=40 06:41:56 Config A/D Result=40 06:41:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:56 Get A/D filter: -9.255963e+061 result=40 06:41:56 Get A/D value=-858993460 result=40 06:41:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:56 Parameters OK 06:41:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:56 Set A/D data flow result=40 06:41:56 Set A/D channel type result=40 06:41:56 Set A/D encoding result=40 06:41:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:56 Set channel filter=0.000000e+000 result=40 06:41:56 Config A/D Result=40 06:41:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:56 Get A/D filter: -9.255963e+061 result=40 06:41:56 Get A/D value=-858993460 result=40 06:41:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:56 Aux= 06:41:56 Message to Camera, serial 134118 queued 06:42:33 Received message from Master: op=PointingHead serial=134131 06:42:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:42:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:42:33 Point started: ret=0 06:42:33 point_skyscan result=0 06:42:34 Check angles 06:42:34 SkyScan query 06:42:34 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.03<-17402 Statuses=0009 0009 06:42:34 Msec=0 True Az=108.825 Ze=-81.03 Az status=0009 Ze status=0009 06:42:34 Check angles 06:42:34 SkyScan query 06:42:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-102<-18800 Statuses=0008 0009 06:42:35 Msec=750 True Az=112.995 Ze=-102 Az status=0008 Ze status=0009 06:42:35 Check angles 06:42:35 SkyScan query 06:42:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.94<-20196 Statuses=0008 0009 06:42:36 Msec=1500 True Az=112.995 Ze=-122.94 Az status=0008 Ze status=0009 06:42:36 Check angles 06:42:36 SkyScan query 06:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.91<-21594 Statuses=0008 0009 06:42:37 Msec=2250 True Az=112.995 Ze=-143.91 Az status=0008 Ze status=0009 06:42:37 Check angles 06:42:37 SkyScan query 06:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.835<-22989 Statuses=0008 0009 06:42:37 Msec=3000 True Az=112.995 Ze=-164.835 Az status=0008 Ze status=0009 06:42:37 Check angles 06:42:37 SkyScan query 06:42:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:42:38 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:42:38 Message to Master queued w/err=0: serial=134131 error=0 06:42:43 Received message from Master: op=Filter serial=134132 06:42:43 Color wheel filter change from 0 to 0 06:42:43 FLIGetFilterPos err=0 currentPosition=0 06:42:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:43 Filter is already there-color wheel unchanged 06:42:43 Received message from Master: op=Shutter serial=134133 06:42:43 Shutter LASER open 06:42:43 Received message from Camera: op=State serial=134135 06:42:43 GetSingleValue result=40 Value=cccccccc 06:42:43 SkyScan query 06:42:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:42:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:44 Parameters OK 06:42:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:44 Set A/D data flow result=40 06:42:44 Set A/D channel type result=40 06:42:44 Set A/D encoding result=40 06:42:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:44 Set channel filter=0.000000e+000 result=40 06:42:44 Config A/D Result=40 06:42:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:44 Get A/D filter: -9.255963e+061 result=40 06:42:44 Get A/D value=-858993460 result=40 06:42:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:44 Parameters OK 06:42:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:44 Set A/D data flow result=40 06:42:44 Set A/D channel type result=40 06:42:44 Set A/D encoding result=40 06:42:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:44 Set channel filter=0.000000e+000 result=40 06:42:44 Config A/D Result=40 06:42:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:44 Get A/D filter: -9.255963e+061 result=40 06:42:44 Get A/D value=-858993460 result=40 06:42:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:44 Aux= 06:42:44 Message to Camera, serial 134135 queued 06:42:52 Received message from Master: op=Shutter serial=134145 06:42:52 Shutter LASER close 06:42:53 Received message from Master: op=PointingHead serial=134149 06:42:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:42:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:42:53 Point started: ret=0 06:42:53 point_skyscan result=0 06:42:54 Check angles 06:42:54 SkyScan query 06:42:54 SkyScan query done: ret=0 az=89.625<-5975 ze=156.96<-1536 Statuses=0009 0009 06:42:54 Msec=0 True Az=89.625 Ze=156.96 Az status=0009 Ze status=0009 06:42:55 Check angles 06:42:55 SkyScan query 06:42:55 SkyScan query done: ret=0 az=72.18<-4812 ze=136.02<-2932 Statuses=0009 0009 06:42:55 Msec=750 True Az=72.18 Ze=136.02 Az status=0009 Ze status=0009 06:42:55 Check angles 06:42:55 SkyScan query 06:42:56 SkyScan query done: ret=0 az=54.84<-3656 ze=115.05<-4330 Statuses=0009 0009 06:42:56 Msec=1500 True Az=54.84 Ze=115.05 Az status=0009 Ze status=0009 06:42:56 Check angles 06:42:56 SkyScan query 06:42:57 SkyScan query done: ret=0 az=41.025<-2735 ze=94.08<-5728 Statuses=0009 0009 06:42:57 Msec=2250 True Az=41.025 Ze=94.08 Az status=0009 Ze status=0009 06:42:57 Check angles 06:42:57 SkyScan query 06:42:57 SkyScan query done: ret=0 az=40.995<-2733 ze=73.125<-7125 Statuses=0008 0009 06:42:57 Msec=3000 True Az=40.995 Ze=73.125 Az status=0008 Ze status=0009 06:42:58 Check angles 06:42:58 SkyScan query 06:42:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 06:42:58 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 06:42:58 Check angles 06:42:58 SkyScan query 06:42:59 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 06:42:59 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 06:42:59 Message to Master queued w/err=0: serial=134149 error=0 06:43:04 Received message from Master: op=Filter serial=134150 06:43:04 Color wheel filter change from 0 to 0 06:43:04 FLIGetFilterPos err=0 currentPosition=0 06:43:04 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:04 Filter is already there-color wheel unchanged 06:43:04 Received message from Master: op=Shutter serial=134151 06:43:04 Shutter LASER close 06:43:04 Received message from Camera: op=State serial=134153 06:43:04 GetSingleValue result=40 Value=cccccccc 06:43:04 SkyScan query 06:43:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:43:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:05 Parameters OK 06:43:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:05 Set A/D data flow result=40 06:43:05 Set A/D channel type result=40 06:43:05 Set A/D encoding result=40 06:43:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:05 Set channel filter=0.000000e+000 result=40 06:43:05 Config A/D Result=40 06:43:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:05 Get A/D filter: -9.255963e+061 result=40 06:43:05 Get A/D value=-858993460 result=40 06:43:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:05 Parameters OK 06:43:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:05 Set A/D data flow result=40 06:43:05 Set A/D channel type result=40 06:43:05 Set A/D encoding result=40 06:43:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:05 Set channel filter=0.000000e+000 result=40 06:43:05 Config A/D Result=40 06:43:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:05 Get A/D filter: -9.255963e+061 result=40 06:43:05 Get A/D value=-858993460 result=40 06:43:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:05 Aux= 06:43:05 Message to Camera, serial 134153 queued 06:43:42 Received message from Master: op=PointingHead serial=134166 06:43:42 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:43:42 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:43:42 Point started: ret=0 06:43:42 point_skyscan result=0 06:43:43 Check angles 06:43:43 SkyScan query 06:43:43 SkyScan query done: ret=0 az=64.08<-4272 ze=66.54<-7564 Statuses=0009 0008 06:43:43 Msec=0 True Az=64.08 Ze=66.54 Az status=0009 Ze status=0008 06:43:44 Check angles 06:43:44 SkyScan query 06:43:44 SkyScan query done: ret=0 az=81.945<-5463 ze=66.51<-7566 Statuses=0009 0008 06:43:44 Msec=750 True Az=81.945 Ze=66.51 Az status=0009 Ze status=0008 06:43:44 Check angles 06:43:44 SkyScan query 06:43:45 SkyScan query done: ret=0 az=99.465<-6631 ze=66.495<-7567 Statuses=0009 0008 06:43:45 Msec=1500 True Az=99.465 Ze=66.495 Az status=0009 Ze status=0008 06:43:45 Check angles 06:43:45 SkyScan query 06:43:46 SkyScan query done: ret=0 az=116.94<-7796 ze=66.495<-7567 Statuses=0009 0008 06:43:46 Msec=2250 True Az=116.94 Ze=66.495 Az status=0009 Ze status=0008 06:43:46 Check angles 06:43:46 SkyScan query 06:43:46 SkyScan query done: ret=0 az=134.835<-8989 ze=66.495<-7567 Statuses=0009 0008 06:43:46 Msec=3000 True Az=134.835 Ze=66.495 Az status=0009 Ze status=0008 06:43:47 Check angles 06:43:47 SkyScan query 06:43:47 SkyScan query done: ret=0 az=152.13<-10142 ze=66.495<-7567 Statuses=0009 0008 06:43:47 Msec=3750 True Az=152.13 Ze=66.495 Az status=0009 Ze status=0008 06:43:47 Check angles 06:43:47 SkyScan query 06:43:48 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 06:43:48 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 06:43:48 Message to Master queued w/err=0: serial=134166 error=0 06:43:53 Received message from Master: op=Filter serial=134167 06:43:53 Color wheel filter change from 0 to 0 06:43:53 FLIGetFilterPos err=0 currentPosition=0 06:43:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:53 Filter is already there-color wheel unchanged 06:43:53 Received message from Master: op=Shutter serial=134168 06:43:53 Shutter LASER close 06:43:53 Received message from Camera: op=State serial=134170 06:43:53 GetSingleValue result=40 Value=cccccccc 06:43:53 SkyScan query 06:43:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:43:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:54 Parameters OK 06:43:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:54 Set A/D data flow result=40 06:43:54 Set A/D channel type result=40 06:43:54 Set A/D encoding result=40 06:43:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:54 Set channel filter=0.000000e+000 result=40 06:43:54 Config A/D Result=40 06:43:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:54 Get A/D filter: -9.255963e+061 result=40 06:43:54 Get A/D value=-858993460 result=40 06:43:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:54 Parameters OK 06:43:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:54 Set A/D data flow result=40 06:43:54 Set A/D channel type result=40 06:43:54 Set A/D encoding result=40 06:43:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:54 Set channel filter=0.000000e+000 result=40 06:43:54 Config A/D Result=40 06:43:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:54 Get A/D filter: -9.255963e+061 result=40 06:43:54 Get A/D value=-858993460 result=40 06:43:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:54 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:54 Aux= 06:43:54 Message to Camera, serial 134170 queued 06:44:31 Received message from Master: op=PointingHead serial=134183 06:44:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:44:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:44:31 Point started: ret=0 06:44:31 point_skyscan result=0 06:44:32 Check angles 06:44:32 SkyScan query 06:44:32 SkyScan query done: ret=0 az=135.165<-9011 ze=36.945<-9537 Statuses=0009 0009 06:44:32 Msec=0 True Az=135.165 Ze=36.945 Az status=0009 Ze status=0009 06:44:32 Check angles 06:44:32 SkyScan query 06:44:33 SkyScan query done: ret=0 az=117.66<-7844 ze=15.99<-10934 Statuses=0009 0009 06:44:33 Msec=750 True Az=117.66 Ze=15.99 Az status=0009 Ze status=0009 06:44:33 Check angles 06:44:33 SkyScan query 06:44:34 SkyScan query done: ret=0 az=100.26<-6684 ze=-4.95<-12330 Statuses=0009 0009 06:44:34 Msec=1500 True Az=100.26 Ze=-4.95 Az status=0009 Ze status=0009 06:44:34 Check angles 06:44:34 SkyScan query 06:44:34 SkyScan query done: ret=0 az=82.785<-5519 ze=-25.92<-13728 Statuses=0009 0009 06:44:34 Msec=2250 True Az=82.785 Ze=-25.92 Az status=0009 Ze status=0009 06:44:35 Check angles 06:44:35 SkyScan query 06:44:35 SkyScan query done: ret=0 az=65.265<-4351 ze=-38.58<-14572 Statuses=0009 0008 06:44:35 Msec=3000 True Az=65.265 Ze=-38.58 Az status=0009 Ze status=0008 06:44:35 Check angles 06:44:35 SkyScan query 06:44:36 SkyScan query done: ret=0 az=47.865<-3191 ze=-38.535<-14569 Statuses=0009 0008 06:44:36 Msec=3750 True Az=47.865 Ze=-38.535 Az status=0009 Ze status=0008 06:44:36 Check angles 06:44:36 SkyScan query 06:44:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:44:37 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:44:37 Message to Master queued w/err=0: serial=134183 error=0 06:44:42 Received message from Master: op=Filter serial=134184 06:44:42 Color wheel filter change from 0 to 0 06:44:42 FLIGetFilterPos err=0 currentPosition=0 06:44:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:42 Filter is already there-color wheel unchanged 06:44:42 Received message from Master: op=Shutter serial=134185 06:44:42 Shutter LASER close 06:44:42 Received message from Camera: op=State serial=134187 06:44:42 GetSingleValue result=40 Value=cccccccc 06:44:42 SkyScan query 06:44:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:44:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:43 Parameters OK 06:44:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:43 Set A/D data flow result=40 06:44:43 Set A/D channel type result=40 06:44:43 Set A/D encoding result=40 06:44:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:43 Set channel filter=0.000000e+000 result=40 06:44:43 Config A/D Result=40 06:44:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:43 Get A/D filter: -9.255963e+061 result=40 06:44:43 Get A/D value=-858993460 result=40 06:44:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:43 Parameters OK 06:44:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:43 Set A/D data flow result=40 06:44:43 Set A/D channel type result=40 06:44:43 Set A/D encoding result=40 06:44:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:43 Set channel filter=0.000000e+000 result=40 06:44:43 Config A/D Result=40 06:44:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:43 Get A/D filter: -9.255963e+061 result=40 06:44:43 Get A/D value=-858993460 result=40 06:44:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:43 Aux= 06:44:43 Message to Camera, serial 134187 queued 06:45:19 Received message from Master: op=PointingHead serial=134200 06:45:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:45:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:45:20 Point started: ret=0 06:45:20 point_skyscan result=0 06:45:20 Check angles 06:45:20 SkyScan query 06:45:21 SkyScan query done: ret=0 az=63.75<-4250 ze=-67.995<-16533 Statuses=0009 0009 06:45:21 Msec=0 True Az=63.75 Ze=-67.995 Az status=0009 Ze status=0009 06:45:21 Check angles 06:45:21 SkyScan query 06:45:22 SkyScan query done: ret=0 az=81.195<-5413 ze=-88.98<-17932 Statuses=0009 0009 06:45:22 Msec=750 True Az=81.195 Ze=-88.98 Az status=0009 Ze status=0009 06:45:22 Check angles 06:45:22 SkyScan query 06:45:23 SkyScan query done: ret=0 az=98.625<-6575 ze=-109.89<-19326 Statuses=0009 0009 06:45:23 Msec=1500 True Az=98.625 Ze=-109.89 Az status=0009 Ze status=0009 06:45:23 Check angles 06:45:23 SkyScan query 06:45:23 SkyScan query done: ret=0 az=116.16<-7744 ze=-130.89<-20726 Statuses=0009 0009 06:45:23 Msec=2250 True Az=116.16 Ze=-130.89 Az status=0009 Ze status=0009 06:45:23 Check angles 06:45:23 SkyScan query 06:45:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 06:45:24 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 06:45:24 Check angles 06:45:24 SkyScan query 06:45:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 06:45:25 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 06:45:25 Message to Master queued w/err=0: serial=134200 error=0 06:45:27 Received message from Master: op=Identify serial=134201 06:45:30 Received message from Master: op=Filter serial=134204 06:45:30 Color wheel filter change from 0 to 0 06:45:30 FLIGetFilterPos err=0 currentPosition=0 06:45:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:30 Filter is already there-color wheel unchanged 06:45:30 Received message from Master: op=Shutter serial=134205 06:45:30 Shutter LASER close 06:45:30 Received message from Camera: op=State serial=134207 06:45:30 GetSingleValue result=40 Value=cccccccc 06:45:30 SkyScan query 06:45:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:45:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:31 Parameters OK 06:45:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:31 Set A/D data flow result=40 06:45:31 Set A/D channel type result=40 06:45:31 Set A/D encoding result=40 06:45:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:31 Set channel filter=0.000000e+000 result=40 06:45:31 Config A/D Result=40 06:45:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:31 Get A/D filter: -9.255963e+061 result=40 06:45:31 Get A/D value=-858993460 result=40 06:45:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:31 Parameters OK 06:45:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:31 Set A/D data flow result=40 06:45:31 Set A/D channel type result=40 06:45:31 Set A/D encoding result=40 06:45:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:31 Set channel filter=0.000000e+000 result=40 06:45:31 Config A/D Result=40 06:45:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:31 Get A/D filter: -9.255963e+061 result=40 06:45:31 Get A/D value=-858993460 result=40 06:45:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:31 Aux= 06:45:31 Message to Camera, serial 134207 queued 06:46:07 Received message from Master: op=PointingHead serial=134220 06:46:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:46:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:46:08 Point started: ret=0 06:46:08 point_skyscan result=0 06:46:08 Check angles 06:46:08 SkyScan query 06:46:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0009 0009 06:46:09 Msec=0 True Az=112.995 Ze=-171.165 Az status=0009 Ze status=0009 06:46:09 Check angles 06:46:09 SkyScan query 06:46:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:46:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 [UTC 2018-12-14 06:46:10] 06:46:10 Message to Master queued w/err=0: serial=134220 error=0 06:46:15 Received message from Master: op=Filter serial=134221 06:46:15 Color wheel filter change from 0 to 0 06:46:15 FLIGetFilterPos err=0 currentPosition=0 06:46:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:15 Filter is already there-color wheel unchanged 06:46:15 Received message from Master: op=Shutter serial=134222 06:46:15 Shutter LASER open 06:46:15 Received message from Camera: op=State serial=134224 06:46:15 GetSingleValue result=40 Value=cccccccc 06:46:15 SkyScan query 06:46:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:46:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:16 Parameters OK 06:46:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:16 Set A/D data flow result=40 06:46:16 Set A/D channel type result=40 06:46:16 Set A/D encoding result=40 06:46:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:16 Set channel filter=0.000000e+000 result=40 06:46:16 Config A/D Result=40 06:46:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:16 Get A/D filter: -9.255963e+061 result=40 06:46:16 Get A/D value=-858993460 result=40 06:46:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:16 Parameters OK 06:46:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:16 Set A/D data flow result=40 06:46:16 Set A/D channel type result=40 06:46:16 Set A/D encoding result=40 06:46:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:16 Set channel filter=0.000000e+000 result=40 06:46:16 Config A/D Result=40 06:46:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:16 Get A/D filter: -9.255963e+061 result=40 06:46:16 Get A/D value=-858993460 result=40 06:46:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:16 Aux= 06:46:16 Message to Camera, serial 134224 queued 06:46:24 Received message from Master: op=Shutter serial=134234 06:46:24 Shutter LASER close 06:46:25 Received message from Master: op=PointingHead serial=134238 06:46:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:46:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:46:25 Point started: ret=0 06:46:25 point_skyscan result=0 06:46:26 Check angles 06:46:26 SkyScan query 06:46:26 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.265<-21551 Statuses=0009 0009 06:46:26 Msec=0 True Az=135.945 Ze=-143.265 Az status=0009 Ze status=0009 06:46:27 Check angles 06:46:27 SkyScan query 06:46:27 SkyScan query done: ret=0 az=153.87<-10258 ze=-121.845<-20123 Statuses=0009 0009 06:46:27 Msec=750 True Az=153.87 Ze=-121.845 Az status=0009 Ze status=0009 06:46:27 Check angles 06:46:27 SkyScan query 06:46:28 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.875<-18725 Statuses=0009 0009 06:46:28 Msec=1500 True Az=171.24 Ze=-100.875 Az status=0009 Ze status=0009 06:46:28 Check angles 06:46:28 SkyScan query 06:46:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.965<-17331 Statuses=0008 0009 06:46:29 Msec=2250 True Az=176.01 Ze=-79.965 Az status=0008 Ze status=0009 06:46:29 Check angles 06:46:29 SkyScan query 06:46:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.5<-15900 Statuses=0008 0009 06:46:29 Msec=3000 True Az=176.01 Ze=-58.5 Az status=0008 Ze status=0009 06:46:30 Check angles 06:46:30 SkyScan query 06:46:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:46:30 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:46:30 Message to Master queued w/err=0: serial=134238 error=0 06:46:35 Received message from Master: op=Filter serial=134239 06:46:35 Color wheel filter change from 0 to 0 06:46:35 FLIGetFilterPos err=0 currentPosition=0 06:46:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:35 Filter is already there-color wheel unchanged 06:46:35 Received message from Master: op=Shutter serial=134240 06:46:35 Shutter LASER close 06:46:36 Received message from Camera: op=State serial=134242 06:46:36 GetSingleValue result=40 Value=cccccccc 06:46:36 SkyScan query 06:46:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:46:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:36 Parameters OK 06:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:36 Set A/D data flow result=40 06:46:36 Set A/D channel type result=40 06:46:36 Set A/D encoding result=40 06:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:36 Set channel filter=0.000000e+000 result=40 06:46:36 Config A/D Result=40 06:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:36 Get A/D filter: -9.255963e+061 result=40 06:46:36 Get A/D value=-858993460 result=40 06:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:36 Parameters OK 06:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:36 Set A/D data flow result=40 06:46:36 Set A/D channel type result=40 06:46:36 Set A/D encoding result=40 06:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:36 Set channel filter=0.000000e+000 result=40 06:46:36 Config A/D Result=40 06:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:36 Get A/D filter: -9.255963e+061 result=40 06:46:36 Get A/D value=-858993460 result=40 06:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:36 Aux= 06:46:36 Message to Camera, serial 134242 queued 06:47:12 Received message from Master: op=PointingHead serial=134254 06:47:12 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:47:12 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:47:12 Point started: ret=0 06:47:12 point_skyscan result=0 06:47:13 Check angles 06:47:13 SkyScan query 06:47:14 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.765<-13451 Statuses=0009 0009 06:47:14 Msec=0 True Az=152.97 Ze=-21.765 Az status=0009 Ze status=0009 06:47:14 Check angles 06:47:14 SkyScan query 06:47:14 SkyScan query done: ret=0 az=135.555<-9037 ze=-0.765<-12051 Statuses=0009 0009 06:47:14 Msec=750 True Az=135.555 Ze=-0.765 Az status=0009 Ze status=0009 06:47:15 Check angles 06:47:15 SkyScan query 06:47:15 SkyScan query done: ret=0 az=117.96<-7864 ze=20.16<-10656 Statuses=0009 0009 06:47:15 Msec=1500 True Az=117.96 Ze=20.16 Az status=0009 Ze status=0009 06:47:15 Check angles 06:47:15 SkyScan query 06:47:16 SkyScan query done: ret=0 az=100.635<-6709 ze=41.145<-9257 Statuses=0009 0009 06:47:16 Msec=2250 True Az=100.635 Ze=41.145 Az status=0009 Ze status=0009 06:47:16 Check angles 06:47:16 SkyScan query 06:47:17 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 06:47:17 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 06:47:17 Check angles 06:47:17 SkyScan query 06:47:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:47:17 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:47:17 Message to Master queued w/err=0: serial=134254 error=0 06:47:22 Received message from Master: op=Filter serial=134255 06:47:22 Color wheel filter change from 0 to 0 06:47:22 FLIGetFilterPos err=0 currentPosition=0 06:47:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:22 Filter is already there-color wheel unchanged 06:47:23 Received message from Master: op=Shutter serial=134256 06:47:23 Shutter LASER close 06:47:23 Received message from Camera: op=State serial=134258 06:47:23 GetSingleValue result=40 Value=cccccccc 06:47:23 SkyScan query 06:47:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:47:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:23 Parameters OK 06:47:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:23 Set A/D data flow result=40 06:47:23 Set A/D channel type result=40 06:47:23 Set A/D encoding result=40 06:47:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:23 Set channel filter=0.000000e+000 result=40 06:47:23 Config A/D Result=40 06:47:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:23 Get A/D filter: -9.255963e+061 result=40 06:47:23 Get A/D value=-858993460 result=40 06:47:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:23 Parameters OK 06:47:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:23 Set A/D data flow result=40 06:47:23 Set A/D channel type result=40 06:47:23 Set A/D encoding result=40 06:47:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:23 Set channel filter=0.000000e+000 result=40 06:47:23 Config A/D Result=40 06:47:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:23 Get A/D filter: -9.255963e+061 result=40 06:47:23 Get A/D value=-858993460 result=40 06:47:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:23 Aux= 06:47:23 Message to Camera, serial 134258 queued 06:48:00 Received message from Master: op=PointingHead serial=134271 06:48:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:48:00 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:48:00 Point started: ret=0 06:48:00 point_skyscan result=0 06:48:01 Check angles 06:48:01 SkyScan query 06:48:02 SkyScan query done: ret=0 az=108.75<-7250 ze=38.49<-9434 Statuses=0009 0008 06:48:02 Msec=0 True Az=108.75 Ze=38.49 Az status=0009 Ze status=0008 06:48:02 Check angles 06:48:02 SkyScan query 06:48:03 SkyScan query done: ret=0 az=126.33<-8422 ze=38.505<-9433 Statuses=0009 0008 06:48:03 Msec=750 True Az=126.33 Ze=38.505 Az status=0009 Ze status=0008 06:48:03 Check angles 06:48:03 SkyScan query 06:48:03 SkyScan query done: ret=0 az=144.06<-9604 ze=38.505<-9433 Statuses=0009 0008 06:48:03 Msec=1500 True Az=144.06 Ze=38.505 Az status=0009 Ze status=0008 06:48:03 Check angles 06:48:03 SkyScan query 06:48:04 SkyScan query done: ret=0 az=161.43<-10762 ze=38.505<-9433 Statuses=0009 0008 06:48:04 Msec=2250 True Az=161.43 Ze=38.505 Az status=0009 Ze status=0008 06:48:04 Check angles 06:48:04 SkyScan query 06:48:05 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:48:05 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:48:05 Check angles 06:48:05 SkyScan query 06:48:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:48:06 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:48:06 Message to Master queued w/err=0: serial=134271 error=0 06:48:11 Received message from Master: op=Filter serial=134272 06:48:11 Color wheel filter change from 0 to 0 06:48:11 FLIGetFilterPos err=0 currentPosition=0 06:48:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:11 Filter is already there-color wheel unchanged 06:48:11 Received message from Master: op=Shutter serial=134273 06:48:11 Shutter LASER close 06:48:11 Received message from Camera: op=State serial=134275 06:48:11 GetSingleValue result=40 Value=cccccccc 06:48:11 SkyScan query 06:48:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:48:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:11 Parameters OK 06:48:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:11 Set A/D data flow result=40 06:48:11 Set A/D channel type result=40 06:48:11 Set A/D encoding result=40 06:48:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:11 Set channel filter=0.000000e+000 result=40 06:48:11 Config A/D Result=40 06:48:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:11 Get A/D filter: -9.255963e+061 result=40 06:48:11 Get A/D value=-858993460 result=40 06:48:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:11 Parameters OK 06:48:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:11 Set A/D data flow result=40 06:48:11 Set A/D channel type result=40 06:48:11 Set A/D encoding result=40 06:48:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:11 Set channel filter=0.000000e+000 result=40 06:48:11 Config A/D Result=40 06:48:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:11 Get A/D filter: -9.255963e+061 result=40 06:48:11 Get A/D value=-858993460 result=40 06:48:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:11 Aux= 06:48:11 Message to Camera, serial 134275 queued 06:48:48 Received message from Master: op=PointingHead serial=134288 06:48:48 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:48:48 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:48:49 Point started: ret=0 06:48:49 point_skyscan result=0 06:48:49 Check angles 06:48:49 SkyScan query 06:48:50 SkyScan query done: ret=0 az=152.775<-10185 ze=8.43<-11438 Statuses=0009 0009 06:48:50 Msec=0 True Az=152.775 Ze=8.43 Az status=0009 Ze status=0009 06:48:50 Check angles 06:48:50 SkyScan query 06:48:51 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.495<-12833 Statuses=0009 0009 06:48:51 Msec=750 True Az=135.3 Ze=-12.495 Az status=0009 Ze status=0009 06:48:51 Check angles 06:48:51 SkyScan query 06:48:51 SkyScan query done: ret=0 az=117.48<-7832 ze=-33.945<-14263 Statuses=0009 0009 06:48:51 Msec=1500 True Az=117.48 Ze=-33.945 Az status=0009 Ze status=0009 06:48:52 Check angles 06:48:52 SkyScan query 06:48:52 SkyScan query done: ret=0 az=100.125<-6675 ze=-51.57<-15438 Statuses=0009 0009 06:48:52 Msec=2250 True Az=100.125 Ze=-51.57 Az status=0009 Ze status=0009 06:48:52 Check angles 06:48:52 SkyScan query 06:48:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 06:48:53 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 06:48:53 Check angles 06:48:53 SkyScan query 06:48:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:48:54 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:48:54 Message to Master queued w/err=0: serial=134288 error=0 06:48:59 Received message from Master: op=Filter serial=134289 06:48:59 Color wheel filter change from 0 to 0 06:48:59 FLIGetFilterPos err=0 currentPosition=0 06:48:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:59 Filter is already there-color wheel unchanged 06:48:59 Received message from Master: op=Shutter serial=134290 06:48:59 Shutter LASER close 06:48:59 Received message from Camera: op=State serial=134292 06:48:59 GetSingleValue result=40 Value=cccccccc 06:48:59 SkyScan query 06:48:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:48:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:59 Parameters OK 06:48:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:59 Set A/D data flow result=40 06:48:59 Set A/D channel type result=40 06:48:59 Set A/D encoding result=40 06:48:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:59 Set channel filter=0.000000e+000 result=40 06:48:59 Config A/D Result=40 06:48:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:59 Get A/D filter: -9.255963e+061 result=40 06:48:59 Get A/D value=-858993460 result=40 06:48:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:59 Parameters OK 06:48:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:59 Set A/D data flow result=40 06:48:59 Set A/D channel type result=40 06:48:59 Set A/D encoding result=40 06:48:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:59 Set channel filter=0.000000e+000 result=40 06:48:59 Config A/D Result=40 06:48:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:59 Get A/D filter: -9.255963e+061 result=40 06:48:59 Get A/D value=-858993460 result=40 06:48:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:59 Aux= 06:48:59 Message to Camera, serial 134292 queued 06:49:36 Received message from Master: op=PointingHead serial=134305 06:49:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:49:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:49:37 Point started: ret=0 06:49:37 point_skyscan result=0 06:49:37 Check angles 06:49:37 SkyScan query 06:49:38 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.105<-17407 Statuses=0009 0009 06:49:38 Msec=0 True Az=108.795 Ze=-81.105 Az status=0009 Ze status=0009 06:49:38 Check angles 06:49:38 SkyScan query 06:49:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 06:49:39 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 06:49:39 Check angles 06:49:39 SkyScan query 06:49:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.91<-20194 Statuses=0008 0009 06:49:39 Msec=1500 True Az=112.995 Ze=-122.91 Az status=0008 Ze status=0009 06:49:40 Check angles 06:49:40 SkyScan query 06:49:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.865<-21591 Statuses=0008 0009 06:49:40 Msec=2250 True Az=112.995 Ze=-143.865 Az status=0008 Ze status=0009 06:49:40 Check angles 06:49:40 SkyScan query 06:49:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.805<-22987 Statuses=0008 0009 06:49:41 Msec=3000 True Az=112.995 Ze=-164.805 Az status=0008 Ze status=0009 06:49:41 Check angles 06:49:41 SkyScan query 06:49:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:49:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:49:42 Message to Master queued w/err=0: serial=134305 error=0 06:49:47 Received message from Master: op=Filter serial=134306 06:49:47 Color wheel filter change from 0 to 0 06:49:47 FLIGetFilterPos err=0 currentPosition=0 06:49:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:49:47 Filter is already there-color wheel unchanged 06:49:47 Received message from Master: op=Shutter serial=134307 06:49:47 Shutter LASER open 06:49:47 Received message from Camera: op=State serial=134309 06:49:47 GetSingleValue result=40 Value=cccccccc 06:49:47 SkyScan query 06:49:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:49:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:48 Parameters OK 06:49:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:48 Set A/D data flow result=40 06:49:48 Set A/D channel type result=40 06:49:48 Set A/D encoding result=40 06:49:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:48 Set channel filter=0.000000e+000 result=40 06:49:48 Config A/D Result=40 06:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:48 Get A/D filter: -9.255963e+061 result=40 06:49:48 Get A/D value=-858993460 result=40 06:49:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:48 Parameters OK 06:49:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:48 Set A/D data flow result=40 06:49:48 Set A/D channel type result=40 06:49:48 Set A/D encoding result=40 06:49:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:48 Set channel filter=0.000000e+000 result=40 06:49:48 Config A/D Result=40 06:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:48 Get A/D filter: -9.255963e+061 result=40 06:49:48 Get A/D value=-858993460 result=40 06:49:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:48 Aux= 06:49:48 Message to Camera, serial 134309 queued 06:49:56 Received message from Master: op=Shutter serial=134319 06:49:56 Shutter LASER close 06:49:56 Received message from Master: op=PointingHead serial=134323 06:49:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:49:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:49:57 Point started: ret=0 06:49:57 point_skyscan result=0 06:49:58 Check angles 06:49:58 SkyScan query 06:49:58 SkyScan query done: ret=0 az=89.58<-5972 ze=156.795<-1547 Statuses=0009 0009 06:49:58 Msec=0 True Az=89.58 Ze=156.795 Az status=0009 Ze status=0009 06:49:58 Check angles 06:49:58 SkyScan query 06:49:59 SkyScan query done: ret=0 az=71.73<-4782 ze=135.3<-2980 Statuses=0009 0009 06:49:59 Msec=750 True Az=71.73 Ze=135.3 Az status=0009 Ze status=0009 06:49:59 Check angles 06:49:59 SkyScan query 06:50:00 SkyScan query done: ret=0 az=54.285<-3619 ze=114.405<-4373 Statuses=0009 0009 06:50:00 Msec=1500 True Az=54.285 Ze=114.405 Az status=0009 Ze status=0009 06:50:00 Check angles 06:50:00 SkyScan query 06:50:00 SkyScan query done: ret=0 az=40.965<-2731 ze=93.48<-5768 Statuses=0009 0009 06:50:00 Msec=2250 True Az=40.965 Ze=93.48 Az status=0009 Ze status=0009 06:50:01 Check angles 06:50:01 SkyScan query 06:50:01 SkyScan query done: ret=0 az=40.995<-2733 ze=72.525<-7165 Statuses=0008 0009 06:50:01 Msec=3000 True Az=40.995 Ze=72.525 Az status=0008 Ze status=0009 06:50:01 Check angles 06:50:01 SkyScan query 06:50:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 06:50:02 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 06:50:02 Check angles 06:50:02 SkyScan query 06:50:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:50:03 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:50:03 Message to Master queued w/err=0: serial=134323 error=0 06:50:08 Received message from Master: op=Filter serial=134324 06:50:08 Color wheel filter change from 0 to 0 06:50:08 FLIGetFilterPos err=0 currentPosition=0 06:50:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:08 Filter is already there-color wheel unchanged 06:50:08 Received message from Master: op=Shutter serial=134325 06:50:08 Shutter LASER close 06:50:08 Received message from Camera: op=State serial=134327 06:50:08 GetSingleValue result=40 Value=cccccccc 06:50:08 SkyScan query 06:50:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:50:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:09 Parameters OK 06:50:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:09 Set A/D data flow result=40 06:50:09 Set A/D channel type result=40 06:50:09 Set A/D encoding result=40 06:50:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:09 Set channel filter=0.000000e+000 result=40 06:50:09 Config A/D Result=40 06:50:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:09 Get A/D filter: -9.255963e+061 result=40 06:50:09 Get A/D value=-858993460 result=40 06:50:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:09 Parameters OK 06:50:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:09 Set A/D data flow result=40 06:50:09 Set A/D channel type result=40 06:50:09 Set A/D encoding result=40 06:50:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:09 Set channel filter=0.000000e+000 result=40 06:50:09 Config A/D Result=40 06:50:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:09 Get A/D filter: -9.255963e+061 result=40 06:50:09 Get A/D value=-858993460 result=40 06:50:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:09 Aux= 06:50:09 Message to Camera, serial 134327 queued 06:50:45 Received message from Master: op=PointingHead serial=134340 06:50:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:50:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:50:46 Point started: ret=0 06:50:46 point_skyscan result=0 06:50:47 Check angles 06:50:47 SkyScan query 06:50:47 SkyScan query done: ret=0 az=64.38<-4292 ze=66.555<-7563 Statuses=0009 0008 06:50:47 Msec=0 True Az=64.38 Ze=66.555 Az status=0009 Ze status=0008 06:50:47 Check angles 06:50:47 SkyScan query 06:50:48 SkyScan query done: ret=0 az=81.96<-5464 ze=66.495<-7567 Statuses=0009 0008 06:50:48 Msec=750 True Az=81.96 Ze=66.495 Az status=0009 Ze status=0008 06:50:48 Check angles 06:50:48 SkyScan query 06:50:49 SkyScan query done: ret=0 az=99.33<-6622 ze=66.495<-7567 Statuses=0009 0008 06:50:49 Msec=1500 True Az=99.33 Ze=66.495 Az status=0009 Ze status=0008 06:50:49 Check angles 06:50:49 SkyScan query 06:50:49 SkyScan query done: ret=0 az=116.88<-7792 ze=66.495<-7567 Statuses=0009 0008 06:50:49 Msec=2250 True Az=116.88 Ze=66.495 Az status=0009 Ze status=0008 06:50:50 Check angles 06:50:50 SkyScan query 06:50:50 SkyScan query done: ret=0 az=134.415<-8961 ze=66.495<-7567 Statuses=0009 0008 06:50:50 Msec=3000 True Az=134.415 Ze=66.495 Az status=0009 Ze status=0008 06:50:50 Check angles 06:50:50 SkyScan query 06:50:51 SkyScan query done: ret=0 az=151.815<-10121 ze=66.495<-7567 Statuses=0009 0008 06:50:51 Msec=3750 True Az=151.815 Ze=66.495 Az status=0009 Ze status=0008 06:50:51 Check angles 06:50:51 SkyScan query 06:50:52 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 06:50:52 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 06:50:52 Message to Master queued w/err=0: serial=134340 error=0 06:50:57 Received message from Master: op=Filter serial=134341 06:50:57 Color wheel filter change from 0 to 0 06:50:57 FLIGetFilterPos err=0 currentPosition=0 06:50:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:57 Filter is already there-color wheel unchanged 06:50:57 Received message from Master: op=Shutter serial=134342 06:50:57 Shutter LASER close 06:50:57 Received message from Camera: op=State serial=134344 06:50:57 GetSingleValue result=40 Value=cccccccc 06:50:57 SkyScan query 06:50:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:50:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:57 Parameters OK 06:50:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:57 Set A/D data flow result=40 06:50:57 Set A/D channel type result=40 06:50:57 Set A/D encoding result=40 06:50:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:57 Set channel filter=0.000000e+000 result=40 06:50:57 Config A/D Result=40 06:50:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:57 Get A/D filter: -9.255963e+061 result=40 06:50:57 Get A/D value=-858993460 result=40 06:50:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:57 Parameters OK 06:50:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:57 Set A/D data flow result=40 06:50:57 Set A/D channel type result=40 06:50:57 Set A/D encoding result=40 06:50:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:57 Set channel filter=0.000000e+000 result=40 06:50:57 Config A/D Result=40 06:50:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:57 Get A/D filter: -9.255963e+061 result=40 06:50:57 Get A/D value=-858993460 result=40 06:50:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:57 Aux= 06:50:57 Message to Camera, serial 134344 queued 06:51:34 Received message from Master: op=PointingHead serial=134357 06:51:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:51:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:51:35 Point started: ret=0 06:51:35 point_skyscan result=0 06:51:35 Check angles 06:51:35 SkyScan query 06:51:36 SkyScan query done: ret=0 az=134.595<-8973 ze=36.39<-9574 Statuses=0009 0009 06:51:36 Msec=0 True Az=134.595 Ze=36.39 Az status=0009 Ze status=0009 06:51:36 Check angles 06:51:36 SkyScan query 06:51:37 SkyScan query done: ret=0 az=117.24<-7816 ze=15.465<-10969 Statuses=0009 0009 06:51:37 Msec=750 True Az=117.24 Ze=15.465 Az status=0009 Ze status=0009 06:51:37 Check angles 06:51:37 SkyScan query 06:51:37 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.535<-12369 Statuses=0009 0009 06:51:37 Msec=1500 True Az=99.825 Ze=-5.535 Az status=0009 Ze status=0009 06:51:38 Check angles 06:51:38 SkyScan query 06:51:38 SkyScan query done: ret=0 az=82.005<-5467 ze=-26.985<-13799 Statuses=0009 0009 06:51:38 Msec=2250 True Az=82.005 Ze=-26.985 Az status=0009 Ze status=0009 06:51:38 Check angles 06:51:38 SkyScan query 06:51:39 SkyScan query done: ret=0 az=64.5<-4300 ze=-38.58<-14572 Statuses=0009 0008 06:51:39 Msec=3000 True Az=64.5 Ze=-38.58 Az status=0009 Ze status=0008 06:51:39 Check angles 06:51:39 SkyScan query 06:51:40 SkyScan query done: ret=0 az=47.055<-3137 ze=-38.52<-14568 Statuses=0009 0008 06:51:40 Msec=3750 True Az=47.055 Ze=-38.52 Az status=0009 Ze status=0008 06:51:40 Check angles 06:51:40 SkyScan query 06:51:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:51:41 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:51:41 Message to Master queued w/err=0: serial=134357 error=0 06:51:46 Received message from Master: op=Filter serial=134358 06:51:46 Color wheel filter change from 0 to 0 06:51:46 FLIGetFilterPos err=0 currentPosition=0 06:51:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:46 Filter is already there-color wheel unchanged 06:51:46 Received message from Master: op=Shutter serial=134359 06:51:46 Shutter LASER close 06:51:46 Received message from Camera: op=State serial=134361 06:51:46 GetSingleValue result=40 Value=cccccccc 06:51:46 SkyScan query 06:51:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:51:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:46 Parameters OK 06:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:46 Set A/D data flow result=40 06:51:46 Set A/D channel type result=40 06:51:46 Set A/D encoding result=40 06:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:46 Set channel filter=0.000000e+000 result=40 06:51:46 Config A/D Result=40 06:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:46 Get A/D filter: -9.255963e+061 result=40 06:51:46 Get A/D value=-858993460 result=40 06:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:46 Parameters OK 06:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:46 Set A/D data flow result=40 06:51:46 Set A/D channel type result=40 06:51:46 Set A/D encoding result=40 06:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:46 Set channel filter=0.000000e+000 result=40 06:51:46 Config A/D Result=40 06:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:46 Get A/D filter: -9.255963e+061 result=40 06:51:46 Get A/D value=-858993460 result=40 06:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:46 Aux= 06:51:46 Message to Camera, serial 134361 queued 06:52:22 Received message from Master: op=PointingHead serial=134373 06:52:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:52:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:52:23 Point started: ret=0 06:52:23 point_skyscan result=0 06:52:23 Check angles 06:52:23 SkyScan query 06:52:24 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.1<-16540 Statuses=0009 0009 06:52:24 Msec=0 True Az=63.795 Ze=-68.1 Az status=0009 Ze status=0009 06:52:24 Check angles 06:52:24 SkyScan query 06:52:25 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.07<-17938 Statuses=0009 0009 06:52:25 Msec=750 True Az=81.39 Ze=-89.07 Az status=0009 Ze status=0009 06:52:25 Check angles 06:52:25 SkyScan query 06:52:25 SkyScan query done: ret=0 az=98.775<-6585 ze=-109.98<-19332 Statuses=0009 0009 06:52:25 Msec=1500 True Az=98.775 Ze=-109.98 Az status=0009 Ze status=0009 06:52:26 Check angles 06:52:26 SkyScan query 06:52:26 SkyScan query done: ret=0 az=116.205<-7747 ze=-130.98<-20732 Statuses=0009 0009 06:52:26 Msec=2250 True Az=116.205 Ze=-130.98 Az status=0009 Ze status=0009 06:52:26 Check angles 06:52:26 SkyScan query 06:52:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 06:52:27 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 06:52:27 Check angles 06:52:27 SkyScan query 06:52:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 06:52:28 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 06:52:28 Message to Master queued w/err=0: serial=134373 error=0 06:52:33 Received message from Master: op=Filter serial=134374 06:52:33 Color wheel filter change from 0 to 0 06:52:33 FLIGetFilterPos err=0 currentPosition=0 06:52:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:33 Filter is already there-color wheel unchanged 06:52:33 Received message from Master: op=Shutter serial=134375 06:52:33 Shutter LASER close 06:52:33 Received message from Camera: op=State serial=134377 06:52:33 GetSingleValue result=40 Value=cccccccc 06:52:33 SkyScan query 06:52:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:52:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:33 Parameters OK 06:52:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:33 Set A/D data flow result=40 06:52:33 Set A/D channel type result=40 06:52:33 Set A/D encoding result=40 06:52:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:33 Set channel filter=0.000000e+000 result=40 06:52:33 Config A/D Result=40 06:52:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:33 Get A/D filter: -9.255963e+061 result=40 06:52:33 Get A/D value=-858993460 result=40 06:52:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:33 Parameters OK 06:52:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:33 Set A/D data flow result=40 06:52:33 Set A/D channel type result=40 06:52:33 Set A/D encoding result=40 06:52:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:33 Set channel filter=0.000000e+000 result=40 06:52:33 Config A/D Result=40 06:52:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:33 Get A/D filter: -9.255963e+061 result=40 06:52:33 Get A/D value=-858993460 result=40 06:52:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:33 Aux= 06:52:33 Message to Camera, serial 134377 queued 06:53:10 Received message from Master: op=PointingHead serial=134390 06:53:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:53:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:53:11 Point started: ret=0 06:53:11 point_skyscan result=0 06:53:11 Check angles 06:53:11 SkyScan query 06:53:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 06:53:12 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 06:53:12 Check angles 06:53:12 SkyScan query 06:53:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:53:13 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:53:13 Message to Master queued w/err=0: serial=134390 error=0 06:53:18 Received message from Master: op=Filter serial=134391 06:53:18 Color wheel filter change from 0 to 0 06:53:18 FLIGetFilterPos err=0 currentPosition=0 06:53:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:18 Filter is already there-color wheel unchanged 06:53:18 Received message from Master: op=Shutter serial=134392 06:53:18 Shutter LASER open 06:53:18 Received message from Camera: op=State serial=134394 06:53:18 GetSingleValue result=40 Value=cccccccc 06:53:18 SkyScan query 06:53:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:53:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:19 Parameters OK 06:53:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:19 Set A/D data flow result=40 06:53:19 Set A/D channel type result=40 06:53:19 Set A/D encoding result=40 06:53:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:19 Set channel filter=0.000000e+000 result=40 06:53:19 Config A/D Result=40 06:53:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:19 Get A/D filter: -9.255963e+061 result=40 06:53:19 Get A/D value=-858993460 result=40 06:53:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:19 Parameters OK 06:53:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:19 Set A/D data flow result=40 06:53:19 Set A/D channel type result=40 06:53:19 Set A/D encoding result=40 06:53:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:19 Set channel filter=0.000000e+000 result=40 06:53:19 Config A/D Result=40 06:53:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:19 Get A/D filter: -9.255963e+061 result=40 06:53:19 Get A/D value=-858993460 result=40 06:53:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:19 Aux= 06:53:19 Message to Camera, serial 134394 queued 06:53:27 Received message from Master: op=Shutter serial=134404 06:53:27 Shutter LASER close 06:53:28 Received message from Master: op=PointingHead serial=134408 06:53:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:53:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:53:28 Point started: ret=0 06:53:28 point_skyscan result=0 06:53:29 Check angles 06:53:29 SkyScan query 06:53:29 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.86<-21524 Statuses=0009 0009 06:53:29 Msec=0 True Az=136.365 Ze=-142.86 Az status=0009 Ze status=0009 06:53:29 Check angles 06:53:29 SkyScan query 06:53:30 SkyScan query done: ret=0 az=153.795<-10253 ze=-121.875<-20125 Statuses=0009 0009 06:53:30 Msec=750 True Az=153.795 Ze=-121.875 Az status=0009 Ze status=0009 06:53:30 Check angles 06:53:30 SkyScan query 06:53:31 SkyScan query done: ret=0 az=171.705<-11447 ze=-100.425<-18695 Statuses=0009 0009 06:53:31 Msec=1500 True Az=171.705 Ze=-100.425 Az status=0009 Ze status=0009 06:53:31 Check angles 06:53:31 SkyScan query 06:53:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.05<-17270 Statuses=0008 0009 06:53:32 Msec=2250 True Az=176.01 Ze=-79.05 Az status=0008 Ze status=0009 06:53:32 Check angles 06:53:32 SkyScan query 06:53:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-57.735<-15849 Statuses=0008 0009 06:53:32 Msec=3000 True Az=176.01 Ze=-57.735 Az status=0008 Ze status=0009 06:53:33 Check angles 06:53:33 SkyScan query 06:53:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 06:53:33 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 06:53:33 Message to Master queued w/err=0: serial=134408 error=0 06:53:38 Received message from Master: op=Filter serial=134409 06:53:38 Color wheel filter change from 0 to 0 06:53:38 FLIGetFilterPos err=0 currentPosition=0 06:53:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:38 Filter is already there-color wheel unchanged 06:53:38 Received message from Master: op=Shutter serial=134410 06:53:38 Shutter LASER close 06:53:38 Received message from Camera: op=State serial=134412 06:53:38 GetSingleValue result=40 Value=cccccccc 06:53:38 SkyScan query 06:53:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:53:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:39 Parameters OK 06:53:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:39 Set A/D data flow result=40 06:53:39 Set A/D channel type result=40 06:53:39 Set A/D encoding result=40 06:53:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:39 Set channel filter=0.000000e+000 result=40 06:53:39 Config A/D Result=40 06:53:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:39 Get A/D filter: -9.255963e+061 result=40 06:53:39 Get A/D value=-858993460 result=40 06:53:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:39 Parameters OK 06:53:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:39 Set A/D data flow result=40 06:53:39 Set A/D channel type result=40 06:53:39 Set A/D encoding result=40 06:53:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:39 Set channel filter=0.000000e+000 result=40 06:53:39 Config A/D Result=40 06:53:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:39 Get A/D filter: -9.255963e+061 result=40 06:53:39 Get A/D value=-858993460 result=40 06:53:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:39 Aux= 06:53:39 Message to Camera, serial 134412 queued 06:54:16 Received message from Master: op=PointingHead serial=134425 06:54:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:54:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:54:16 Point started: ret=0 06:54:16 point_skyscan result=0 06:54:17 Check angles 06:54:17 SkyScan query 06:54:18 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.33<-13422 Statuses=0009 0009 06:54:18 Msec=0 True Az=152.73 Ze=-21.33 Az status=0009 Ze status=0009 06:54:18 Check angles 06:54:18 SkyScan query 06:54:18 SkyScan query done: ret=0 az=134.745<-8983 ze=0.03<-11998 Statuses=0009 0009 06:54:18 Msec=750 True Az=134.745 Ze=0.03 Az status=0009 Ze status=0009 06:54:18 Check angles 06:54:18 SkyScan query 06:54:19 SkyScan query done: ret=0 az=117.345<-7823 ze=21.03<-10598 Statuses=0009 0009 06:54:19 Msec=1500 True Az=117.345 Ze=21.03 Az status=0009 Ze status=0009 06:54:19 Check angles 06:54:19 SkyScan query 06:54:20 SkyScan query done: ret=0 az=99.945<-6663 ze=41.955<-9203 Statuses=0009 0009 06:54:20 Msec=2250 True Az=99.945 Ze=41.955 Az status=0009 Ze status=0009 06:54:20 Check angles 06:54:20 SkyScan query 06:54:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 06:54:21 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 06:54:21 Check angles 06:54:21 SkyScan query 06:54:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:54:21 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:54:21 Message to Master queued w/err=0: serial=134425 error=0 06:54:26 Received message from Master: op=Filter serial=134426 06:54:26 Color wheel filter change from 0 to 0 06:54:26 FLIGetFilterPos err=0 currentPosition=0 06:54:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:26 Filter is already there-color wheel unchanged 06:54:26 Received message from Master: op=Shutter serial=134427 06:54:26 Shutter LASER close 06:54:27 Received message from Camera: op=State serial=134429 06:54:27 GetSingleValue result=40 Value=cccccccc 06:54:27 SkyScan query 06:54:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:54:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:27 Parameters OK 06:54:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:27 Set A/D data flow result=40 06:54:27 Set A/D channel type result=40 06:54:27 Set A/D encoding result=40 06:54:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:27 Set channel filter=0.000000e+000 result=40 06:54:27 Config A/D Result=40 06:54:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:27 Get A/D filter: -9.255963e+061 result=40 06:54:27 Get A/D value=-858993460 result=40 06:54:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:27 Parameters OK 06:54:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:27 Set A/D data flow result=40 06:54:27 Set A/D channel type result=40 06:54:27 Set A/D encoding result=40 06:54:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:27 Set channel filter=0.000000e+000 result=40 06:54:27 Config A/D Result=40 06:54:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:27 Get A/D filter: -9.255963e+061 result=40 06:54:27 Get A/D value=-858993460 result=40 06:54:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:27 Aux= 06:54:27 Message to Camera, serial 134429 queued 06:55:04 Received message from Master: op=PointingHead serial=134442 06:55:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:55:04 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:55:04 Point started: ret=0 06:55:04 point_skyscan result=0 06:55:05 Check angles 06:55:05 SkyScan query 06:55:06 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 06:55:06 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 06:55:06 Check angles 06:55:06 SkyScan query 06:55:06 SkyScan query done: ret=0 az=126.72<-8448 ze=38.49<-9434 Statuses=0009 0008 06:55:06 Msec=750 True Az=126.72 Ze=38.49 Az status=0009 Ze status=0008 06:55:07 Check angles 06:55:07 SkyScan query 06:55:07 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 06:55:07 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 06:55:07 Check angles 06:55:07 SkyScan query 06:55:08 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 06:55:08 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 06:55:08 Check angles 06:55:08 SkyScan query 06:55:09 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:55:09 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:55:09 Check angles 06:55:09 SkyScan query 06:55:09 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:55:09 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:55:09 Message to Master queued w/err=0: serial=134442 error=0 06:55:14 Received message from Master: op=Filter serial=134443 06:55:14 Color wheel filter change from 0 to 0 06:55:14 FLIGetFilterPos err=0 currentPosition=0 06:55:14 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:14 Filter is already there-color wheel unchanged 06:55:15 Received message from Master: op=Shutter serial=134444 06:55:15 Shutter LASER close 06:55:15 Received message from Camera: op=State serial=134446 06:55:15 GetSingleValue result=40 Value=cccccccc 06:55:15 SkyScan query 06:55:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:55:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:15 Parameters OK 06:55:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:15 Set A/D data flow result=40 06:55:15 Set A/D channel type result=40 06:55:15 Set A/D encoding result=40 06:55:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:15 Set channel filter=0.000000e+000 result=40 06:55:15 Config A/D Result=40 06:55:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:15 Get A/D filter: -9.255963e+061 result=40 06:55:15 Get A/D value=-858993460 result=40 06:55:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:15 Parameters OK 06:55:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:15 Set A/D data flow result=40 06:55:15 Set A/D channel type result=40 06:55:15 Set A/D encoding result=40 06:55:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:15 Set channel filter=0.000000e+000 result=40 06:55:15 Config A/D Result=40 06:55:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:15 Get A/D filter: -9.255963e+061 result=40 06:55:15 Get A/D value=-858993460 result=40 06:55:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:15 Aux= 06:55:15 Message to Camera, serial 134446 queued 06:55:52 Received message from Master: op=PointingHead serial=134459 06:55:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:55:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:55:52 Point started: ret=0 06:55:52 point_skyscan result=0 [UTC 2018-12-14 06:55:52] 06:55:53 Check angles 06:55:53 SkyScan query 06:55:54 SkyScan query done: ret=0 az=153.105<-10207 ze=8.85<-11410 Statuses=0009 0009 06:55:54 Msec=0 True Az=153.105 Ze=8.85 Az status=0009 Ze status=0009 06:55:54 Check angles 06:55:54 SkyScan query 06:55:54 SkyScan query done: ret=0 az=135.66<-9044 ze=-12.09<-12806 Statuses=0009 0009 06:55:54 Msec=750 True Az=135.66 Ze=-12.09 Az status=0009 Ze status=0009 06:55:55 Check angles 06:55:55 SkyScan query 06:55:55 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.555<-14237 Statuses=0009 0009 06:55:55 Msec=1500 True Az=117.585 Ze=-33.555 Az status=0009 Ze status=0009 06:55:55 Check angles 06:55:55 SkyScan query 06:55:56 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.555<-15437 Statuses=0009 0009 06:55:56 Msec=2250 True Az=100.395 Ze=-51.555 Az status=0009 Ze status=0009 06:55:56 Check angles 06:55:56 SkyScan query 06:55:57 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 06:55:57 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 06:55:57 Check angles 06:55:57 SkyScan query 06:55:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:55:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:55:57 Message to Master queued w/err=0: serial=134459 error=0 06:56:02 Received message from Master: op=Filter serial=134460 06:56:02 Color wheel filter change from 0 to 0 06:56:02 FLIGetFilterPos err=0 currentPosition=0 06:56:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:02 Filter is already there-color wheel unchanged 06:56:03 Received message from Master: op=Shutter serial=134461 06:56:03 Shutter LASER close 06:56:03 Received message from Camera: op=State serial=134463 06:56:03 GetSingleValue result=40 Value=cccccccc 06:56:03 SkyScan query 06:56:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:56:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:03 Parameters OK 06:56:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:03 Set A/D data flow result=40 06:56:03 Set A/D channel type result=40 06:56:03 Set A/D encoding result=40 06:56:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:03 Set channel filter=0.000000e+000 result=40 06:56:03 Config A/D Result=40 06:56:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:03 Get A/D filter: -9.255963e+061 result=40 06:56:03 Get A/D value=-858993460 result=40 06:56:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:03 Parameters OK 06:56:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:03 Set A/D data flow result=40 06:56:03 Set A/D channel type result=40 06:56:03 Set A/D encoding result=40 06:56:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:03 Set channel filter=0.000000e+000 result=40 06:56:03 Config A/D Result=40 06:56:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:03 Get A/D filter: -9.255963e+061 result=40 06:56:03 Get A/D value=-858993460 result=40 06:56:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:03 Aux= 06:56:03 Message to Camera, serial 134463 queued 06:56:40 Received message from Master: op=PointingHead serial=134476 06:56:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:56:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:56:41 Point started: ret=0 06:56:41 point_skyscan result=0 06:56:41 Check angles 06:56:41 SkyScan query 06:56:42 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.78<-17452 Statuses=0009 0009 06:56:42 Msec=0 True Az=109.38 Ze=-81.78 Az status=0009 Ze status=0009 06:56:42 Check angles 06:56:42 SkyScan query 06:56:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.72<-18848 Statuses=0008 0009 06:56:43 Msec=750 True Az=112.995 Ze=-102.72 Az status=0008 Ze status=0009 06:56:43 Check angles 06:56:43 SkyScan query 06:56:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 06:56:43 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 06:56:44 Check angles 06:56:44 SkyScan query 06:56:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.585<-21639 Statuses=0008 0009 06:56:44 Msec=2250 True Az=112.995 Ze=-144.585 Az status=0008 Ze status=0009 06:56:44 Check angles 06:56:44 SkyScan query 06:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 06:56:45 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 06:56:45 Check angles 06:56:45 SkyScan query 06:56:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:56:46 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:56:46 Message to Master queued w/err=0: serial=134476 error=0 06:56:51 Received message from Master: op=Filter serial=134477 06:56:51 Color wheel filter change from 0 to 0 06:56:51 FLIGetFilterPos err=0 currentPosition=0 06:56:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:51 Filter is already there-color wheel unchanged 06:56:51 Received message from Master: op=Shutter serial=134478 06:56:51 Shutter LASER open 06:56:51 Received message from Camera: op=State serial=134480 06:56:51 GetSingleValue result=40 Value=cccccccc 06:56:51 SkyScan query 06:56:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:56:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:52 Parameters OK 06:56:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:52 Set A/D data flow result=40 06:56:52 Set A/D channel type result=40 06:56:52 Set A/D encoding result=40 06:56:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:52 Set channel filter=0.000000e+000 result=40 06:56:52 Config A/D Result=40 06:56:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:52 Get A/D filter: -9.255963e+061 result=40 06:56:52 Get A/D value=-858993460 result=40 06:56:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:52 Parameters OK 06:56:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:52 Set A/D data flow result=40 06:56:52 Set A/D channel type result=40 06:56:52 Set A/D encoding result=40 06:56:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:52 Set channel filter=0.000000e+000 result=40 06:56:52 Config A/D Result=40 06:56:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:52 Get A/D filter: -9.255963e+061 result=40 06:56:52 Get A/D value=-858993460 result=40 06:56:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:52 Aux= 06:56:52 Message to Camera, serial 134480 queued 06:57:00 Received message from Master: op=Shutter serial=134490 06:57:00 Shutter LASER close 06:57:00 Received message from Master: op=PointingHead serial=134494 06:57:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:57:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:57:01 Point started: ret=0 06:57:01 point_skyscan result=0 06:57:01 Check angles 06:57:01 SkyScan query 06:57:02 SkyScan query done: ret=0 az=90.15<-6010 ze=157.56<-1496 Statuses=0009 0009 06:57:02 Msec=0 True Az=90.15 Ze=157.56 Az status=0009 Ze status=0009 06:57:02 Check angles 06:57:02 SkyScan query 06:57:03 SkyScan query done: ret=0 az=72.765<-4851 ze=136.575<-2895 Statuses=0009 0009 06:57:03 Msec=750 True Az=72.765 Ze=136.575 Az status=0009 Ze status=0009 06:57:03 Check angles 06:57:03 SkyScan query 06:57:04 SkyScan query done: ret=0 az=54.81<-3654 ze=115.215<-4319 Statuses=0009 0009 06:57:04 Msec=1500 True Az=54.81 Ze=115.215 Az status=0009 Ze status=0009 06:57:04 Check angles 06:57:04 SkyScan query 06:57:04 SkyScan query done: ret=0 az=40.995<-2733 ze=94.215<-5719 Statuses=0009 0009 06:57:04 Msec=2250 True Az=40.995 Ze=94.215 Az status=0009 Ze status=0009 06:57:04 Check angles 06:57:04 SkyScan query 06:57:05 SkyScan query done: ret=0 az=40.995<-2733 ze=73.275<-7115 Statuses=0008 0009 06:57:05 Msec=3000 True Az=40.995 Ze=73.275 Az status=0008 Ze status=0009 06:57:05 Check angles 06:57:05 SkyScan query 06:57:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 06:57:06 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 06:57:06 Check angles 06:57:06 SkyScan query 06:57:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:57:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:57:07 Message to Master queued w/err=0: serial=134494 error=0 06:57:12 Received message from Master: op=Filter serial=134495 06:57:12 Color wheel filter change from 0 to 0 06:57:12 FLIGetFilterPos err=0 currentPosition=0 06:57:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:12 Filter is already there-color wheel unchanged 06:57:12 Received message from Master: op=Shutter serial=134496 06:57:12 Shutter LASER close 06:57:12 Received message from Camera: op=State serial=134498 06:57:12 GetSingleValue result=40 Value=cccccccc 06:57:12 SkyScan query 06:57:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:57:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:13 Parameters OK 06:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:13 Set A/D data flow result=40 06:57:13 Set A/D channel type result=40 06:57:13 Set A/D encoding result=40 06:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:13 Set channel filter=0.000000e+000 result=40 06:57:13 Config A/D Result=40 06:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:13 Get A/D filter: -9.255963e+061 result=40 06:57:13 Get A/D value=-858993460 result=40 06:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:13 Parameters OK 06:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:13 Set A/D data flow result=40 06:57:13 Set A/D channel type result=40 06:57:13 Set A/D encoding result=40 06:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:13 Set channel filter=0.000000e+000 result=40 06:57:13 Config A/D Result=40 06:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:13 Get A/D filter: -9.255963e+061 result=40 06:57:13 Get A/D value=-858993460 result=40 06:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:13 Aux= 06:57:13 Message to Camera, serial 134498 queued 06:57:49 Received message from Master: op=PointingHead serial=134511 06:57:49 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:57:49 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:57:50 Point started: ret=0 06:57:50 point_skyscan result=0 06:57:50 Check angles 06:57:50 SkyScan query 06:57:51 SkyScan query done: ret=0 az=64.05<-4270 ze=66.555<-7563 Statuses=0009 0008 06:57:51 Msec=0 True Az=64.05 Ze=66.555 Az status=0009 Ze status=0008 06:57:51 Check angles 06:57:51 SkyScan query 06:57:52 SkyScan query done: ret=0 az=81.945<-5463 ze=66.495<-7567 Statuses=0009 0008 06:57:52 Msec=750 True Az=81.945 Ze=66.495 Az status=0009 Ze status=0008 06:57:52 Check angles 06:57:52 SkyScan query 06:57:53 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 06:57:53 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 06:57:53 Check angles 06:57:53 SkyScan query 06:57:53 SkyScan query done: ret=0 az=116.895<-7793 ze=66.495<-7567 Statuses=0009 0008 06:57:53 Msec=2250 True Az=116.895 Ze=66.495 Az status=0009 Ze status=0008 06:57:53 Check angles 06:57:53 SkyScan query 06:57:54 SkyScan query done: ret=0 az=134.415<-8961 ze=66.495<-7567 Statuses=0009 0008 06:57:54 Msec=3000 True Az=134.415 Ze=66.495 Az status=0009 Ze status=0008 06:57:54 Check angles 06:57:54 SkyScan query 06:57:55 SkyScan query done: ret=0 az=151.74<-10116 ze=66.495<-7567 Statuses=0009 0008 06:57:55 Msec=3750 True Az=151.74 Ze=66.495 Az status=0009 Ze status=0008 06:57:55 Check angles 06:57:55 SkyScan query 06:57:56 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 06:57:56 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 06:57:56 Message to Master queued w/err=0: serial=134511 error=0 06:58:01 Received message from Master: op=Filter serial=134512 06:58:01 Color wheel filter change from 0 to 0 06:58:01 FLIGetFilterPos err=0 currentPosition=0 06:58:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:01 Filter is already there-color wheel unchanged 06:58:01 Received message from Master: op=Shutter serial=134513 06:58:01 Shutter LASER close 06:58:01 Received message from Camera: op=State serial=134515 06:58:01 GetSingleValue result=40 Value=cccccccc 06:58:01 SkyScan query 06:58:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:58:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:01 Parameters OK 06:58:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:01 Set A/D data flow result=40 06:58:01 Set A/D channel type result=40 06:58:01 Set A/D encoding result=40 06:58:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:01 Set channel filter=0.000000e+000 result=40 06:58:01 Config A/D Result=40 06:58:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:01 Get A/D filter: -9.255963e+061 result=40 06:58:01 Get A/D value=-858993460 result=40 06:58:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:01 Parameters OK 06:58:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:01 Set A/D data flow result=40 06:58:01 Set A/D channel type result=40 06:58:01 Set A/D encoding result=40 06:58:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:01 Set channel filter=0.000000e+000 result=40 06:58:01 Config A/D Result=40 06:58:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:01 Get A/D filter: -9.255963e+061 result=40 06:58:01 Get A/D value=-858993460 result=40 06:58:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:01 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:01 Aux= 06:58:01 Message to Camera, serial 134515 queued 06:58:38 Received message from Master: op=PointingHead serial=134528 06:58:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:58:38 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:58:38 Point started: ret=0 06:58:38 point_skyscan result=0 06:58:39 Check angles 06:58:39 SkyScan query 06:58:40 SkyScan query done: ret=0 az=134.94<-8996 ze=36.72<-9552 Statuses=0009 0009 06:58:40 Msec=0 True Az=134.94 Ze=36.72 Az status=0009 Ze status=0009 06:58:40 Check angles 06:58:40 SkyScan query 06:58:41 SkyScan query done: ret=0 az=117.48<-7832 ze=15.78<-10948 Statuses=0009 0009 06:58:41 Msec=750 True Az=117.48 Ze=15.78 Az status=0009 Ze status=0009 06:58:41 Check angles 06:58:41 SkyScan query 06:58:41 SkyScan query done: ret=0 az=100.155<-6677 ze=-5.19<-12346 Statuses=0009 0009 06:58:41 Msec=1500 True Az=100.155 Ze=-5.19 Az status=0009 Ze status=0009 06:58:41 Check angles 06:58:41 SkyScan query 06:58:42 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.595<-13773 Statuses=0009 0009 06:58:42 Msec=2250 True Az=82.2 Ze=-26.595 Az status=0009 Ze status=0009 06:58:42 Check angles 06:58:42 SkyScan query 06:58:43 SkyScan query done: ret=0 az=64.8<-4320 ze=-38.58<-14572 Statuses=0009 0008 06:58:43 Msec=3000 True Az=64.8 Ze=-38.58 Az status=0009 Ze status=0008 06:58:43 Check angles 06:58:43 SkyScan query 06:58:44 SkyScan query done: ret=0 az=47.265<-3151 ze=-38.52<-14568 Statuses=0009 0008 06:58:44 Msec=3750 True Az=47.265 Ze=-38.52 Az status=0009 Ze status=0008 06:58:44 Check angles 06:58:44 SkyScan query 06:58:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:58:44 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:58:44 Message to Master queued w/err=0: serial=134528 error=0 06:58:49 Received message from Master: op=Filter serial=134529 06:58:49 Color wheel filter change from 0 to 0 06:58:49 FLIGetFilterPos err=0 currentPosition=0 06:58:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:49 Filter is already there-color wheel unchanged 06:58:50 Received message from Master: op=Shutter serial=134530 06:58:50 Shutter LASER close 06:58:50 Received message from Camera: op=State serial=134532 06:58:50 GetSingleValue result=40 Value=cccccccc 06:58:50 SkyScan query 06:58:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:58:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:50 Parameters OK 06:58:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:50 Set A/D data flow result=40 06:58:50 Set A/D channel type result=40 06:58:50 Set A/D encoding result=40 06:58:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:50 Set channel filter=0.000000e+000 result=40 06:58:50 Config A/D Result=40 06:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:50 Get A/D filter: -9.255963e+061 result=40 06:58:50 Get A/D value=-858993460 result=40 06:58:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:50 Parameters OK 06:58:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:50 Set A/D data flow result=40 06:58:50 Set A/D channel type result=40 06:58:50 Set A/D encoding result=40 06:58:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:50 Set channel filter=0.000000e+000 result=40 06:58:50 Config A/D Result=40 06:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:50 Get A/D filter: -9.255963e+061 result=40 06:58:50 Get A/D value=-858993460 result=40 06:58:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:50 Aux= 06:58:50 Message to Camera, serial 134532 queued 06:59:27 Received message from Master: op=PointingHead serial=134545 06:59:27 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:59:27 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:59:27 Point started: ret=0 06:59:27 point_skyscan result=0 06:59:28 Check angles 06:59:28 SkyScan query 06:59:29 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.445<-16563 Statuses=0009 0009 06:59:29 Msec=0 True Az=64.17 Ze=-68.445 Az status=0009 Ze status=0009 06:59:29 Check angles 06:59:29 SkyScan query 06:59:29 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.4<-17960 Statuses=0009 0009 06:59:29 Msec=750 True Az=81.6 Ze=-89.4 Az status=0009 Ze status=0009 06:59:30 Check angles 06:59:30 SkyScan query 06:59:30 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.775<-19385 Statuses=0009 0009 06:59:30 Msec=1500 True Az=99.405 Ze=-110.775 Az status=0009 Ze status=0009 06:59:30 Check angles 06:59:30 SkyScan query 06:59:31 SkyScan query done: ret=0 az=116.865<-7791 ze=-131.82<-20788 Statuses=0009 0009 06:59:31 Msec=2250 True Az=116.865 Ze=-131.82 Az status=0009 Ze status=0009 06:59:31 Check angles 06:59:31 SkyScan query 06:59:32 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 06:59:32 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 06:59:32 Check angles 06:59:32 SkyScan query 06:59:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 06:59:32 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 06:59:32 Message to Master queued w/err=0: serial=134545 error=0 06:59:37 Received message from Master: op=Filter serial=134546 06:59:37 Color wheel filter change from 0 to 0 06:59:37 FLIGetFilterPos err=0 currentPosition=0 06:59:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:37 Filter is already there-color wheel unchanged 06:59:38 Received message from Master: op=Shutter serial=134547 06:59:38 Shutter LASER close 06:59:38 Received message from Camera: op=State serial=134549 06:59:38 GetSingleValue result=40 Value=cccccccc 06:59:38 SkyScan query 06:59:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:59:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:38 Parameters OK 06:59:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:38 Set A/D data flow result=40 06:59:38 Set A/D channel type result=40 06:59:38 Set A/D encoding result=40 06:59:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:38 Set channel filter=0.000000e+000 result=40 06:59:38 Config A/D Result=40 06:59:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:38 Get A/D filter: -9.255963e+061 result=40 06:59:38 Get A/D value=-858993460 result=40 06:59:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:38 Parameters OK 06:59:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:38 Set A/D data flow result=40 06:59:38 Set A/D channel type result=40 06:59:38 Set A/D encoding result=40 06:59:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:38 Set channel filter=0.000000e+000 result=40 06:59:38 Config A/D Result=40 06:59:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:38 Get A/D filter: -9.255963e+061 result=40 06:59:38 Get A/D value=-858993460 result=40 06:59:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:38 Aux= 06:59:38 Message to Camera, serial 134549 queued 07:00:15 Received message from Master: op=PointingHead serial=134562 07:00:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:00:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:00:15 Point started: ret=0 07:00:15 point_skyscan result=0 07:00:16 Check angles 07:00:16 SkyScan query 07:00:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 07:00:17 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 07:00:17 Check angles 07:00:17 SkyScan query 07:00:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:00:17 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:00:17 Message to Master queued w/err=0: serial=134562 error=0 07:00:22 Received message from Master: op=Filter serial=134563 07:00:22 Color wheel filter change from 0 to 0 07:00:22 FLIGetFilterPos err=0 currentPosition=0 07:00:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:22 Filter is already there-color wheel unchanged 07:00:23 Received message from Master: op=Shutter serial=134564 07:00:23 Shutter LASER open 07:00:23 Received message from Camera: op=State serial=134566 07:00:23 GetSingleValue result=40 Value=cccccccc 07:00:23 SkyScan query 07:00:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:00:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:23 Parameters OK 07:00:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:23 Set A/D data flow result=40 07:00:23 Set A/D channel type result=40 07:00:23 Set A/D encoding result=40 07:00:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:23 Set channel filter=0.000000e+000 result=40 07:00:23 Config A/D Result=40 07:00:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:23 Get A/D filter: -9.255963e+061 result=40 07:00:23 Get A/D value=-858993460 result=40 07:00:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:23 Parameters OK 07:00:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:23 Set A/D data flow result=40 07:00:23 Set A/D channel type result=40 07:00:23 Set A/D encoding result=40 07:00:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:23 Set channel filter=0.000000e+000 result=40 07:00:23 Config A/D Result=40 07:00:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:23 Get A/D filter: -9.255963e+061 result=40 07:00:23 Get A/D value=-858993460 result=40 07:00:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:23 Aux= 07:00:23 Message to Camera, serial 134566 queued 07:00:32 Received message from Master: op=Shutter serial=134576 07:00:32 Shutter LASER close 07:00:32 Received message from Master: op=PointingHead serial=134580 07:00:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:00:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:00:33 Point started: ret=0 07:00:33 point_skyscan result=0 07:00:34 Check angles 07:00:34 SkyScan query 07:00:34 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.385<-21559 Statuses=0009 0009 07:00:34 Msec=0 True Az=135.885 Ze=-143.385 Az status=0009 Ze status=0009 07:00:34 Check angles 07:00:34 SkyScan query 07:00:35 SkyScan query done: ret=0 az=153.735<-10249 ze=-121.965<-20131 Statuses=0009 0009 07:00:35 Msec=750 True Az=153.735 Ze=-121.965 Az status=0009 Ze status=0009 07:00:35 Check angles 07:00:35 SkyScan query 07:00:36 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.01<-18734 Statuses=0009 0009 07:00:36 Msec=1500 True Az=171.21 Ze=-101.01 Az status=0009 Ze status=0009 07:00:36 Check angles 07:00:36 SkyScan query 07:00:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.1<-17340 Statuses=0008 0009 07:00:36 Msec=2250 True Az=176.01 Ze=-80.1 Az status=0008 Ze status=0009 07:00:37 Check angles 07:00:37 SkyScan query 07:00:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.115<-15941 Statuses=0008 0009 07:00:37 Msec=3000 True Az=176.01 Ze=-59.115 Az status=0008 Ze status=0009 07:00:37 Check angles 07:00:37 SkyScan query 07:00:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:00:38 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:00:38 Message to Master queued w/err=0: serial=134580 error=0 07:00:43 Received message from Master: op=Filter serial=134581 07:00:43 Color wheel filter change from 0 to 0 07:00:43 FLIGetFilterPos err=0 currentPosition=0 07:00:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:43 Filter is already there-color wheel unchanged 07:00:43 Received message from Master: op=Shutter serial=134582 07:00:43 Shutter LASER close 07:00:43 Received message from Camera: op=State serial=134584 07:00:43 GetSingleValue result=40 Value=cccccccc 07:00:43 SkyScan query 07:00:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:00:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:44 Parameters OK 07:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:44 Set A/D data flow result=40 07:00:44 Set A/D channel type result=40 07:00:44 Set A/D encoding result=40 07:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:44 Set channel filter=0.000000e+000 result=40 07:00:44 Config A/D Result=40 07:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:44 Get A/D filter: -9.255963e+061 result=40 07:00:44 Get A/D value=-858993460 result=40 07:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:44 Parameters OK 07:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:44 Set A/D data flow result=40 07:00:44 Set A/D channel type result=40 07:00:44 Set A/D encoding result=40 07:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:44 Set channel filter=0.000000e+000 result=40 07:00:44 Config A/D Result=40 07:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:44 Get A/D filter: -9.255963e+061 result=40 07:00:44 Get A/D value=-858993460 result=40 07:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:44 Aux= 07:00:44 Message to Camera, serial 134584 queued 07:01:20 Received message from Master: op=PointingHead serial=134596 07:01:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:01:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:01:20 Point started: ret=0 07:01:20 point_skyscan result=0 07:01:21 Check angles 07:01:21 SkyScan query 07:01:21 SkyScan query done: ret=0 az=153.135<-10209 ze=-21.9<-13460 Statuses=0009 0009 07:01:21 Msec=0 True Az=153.135 Ze=-21.9 Az status=0009 Ze status=0009 07:01:22 Check angles 07:01:22 SkyScan query 07:01:22 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.87<-12058 Statuses=0009 0009 07:01:22 Msec=750 True Az=135.675 Ze=-0.87 Az status=0009 Ze status=0009 07:01:22 Check angles 07:01:22 SkyScan query 07:01:23 SkyScan query done: ret=0 az=118.125<-7875 ze=20.055<-10663 Statuses=0009 0009 07:01:23 Msec=1500 True Az=118.125 Ze=20.055 Az status=0009 Ze status=0009 07:01:23 Check angles 07:01:23 SkyScan query 07:01:24 SkyScan query done: ret=0 az=100.695<-6713 ze=41.04<-9264 Statuses=0009 0009 07:01:24 Msec=2250 True Az=100.695 Ze=41.04 Az status=0009 Ze status=0009 07:01:24 Check angles 07:01:24 SkyScan query 07:01:24 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 07:01:24 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 07:01:25 Check angles 07:01:25 SkyScan query 07:01:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:01:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:01:25 Message to Master queued w/err=0: serial=134596 error=0 07:01:30 Received message from Master: op=Filter serial=134597 07:01:30 Color wheel filter change from 0 to 0 07:01:30 FLIGetFilterPos err=0 currentPosition=0 07:01:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:30 Filter is already there-color wheel unchanged 07:01:30 Received message from Master: op=Shutter serial=134598 07:01:30 Shutter LASER close 07:01:30 Received message from Camera: op=State serial=134600 07:01:30 GetSingleValue result=40 Value=cccccccc 07:01:30 SkyScan query 07:01:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:01:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:31 Parameters OK 07:01:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:31 Set A/D data flow result=40 07:01:31 Set A/D channel type result=40 07:01:31 Set A/D encoding result=40 07:01:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:31 Set channel filter=0.000000e+000 result=40 07:01:31 Config A/D Result=40 07:01:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:31 Get A/D filter: -9.255963e+061 result=40 07:01:31 Get A/D value=-858993460 result=40 07:01:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:31 Parameters OK 07:01:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:31 Set A/D data flow result=40 07:01:31 Set A/D channel type result=40 07:01:31 Set A/D encoding result=40 07:01:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:31 Set channel filter=0.000000e+000 result=40 07:01:31 Config A/D Result=40 07:01:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:31 Get A/D filter: -9.255963e+061 result=40 07:01:31 Get A/D value=-858993460 result=40 07:01:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:31 Aux= 07:01:31 Message to Camera, serial 134600 queued 07:02:08 Received message from Master: op=PointingHead serial=134613 07:02:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:02:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:02:08 Point started: ret=0 07:02:08 point_skyscan result=0 07:02:09 Check angles 07:02:09 SkyScan query 07:02:09 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 07:02:09 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 07:02:10 Check angles 07:02:10 SkyScan query 07:02:10 SkyScan query done: ret=0 az=126.525<-8435 ze=38.505<-9433 Statuses=0009 0008 07:02:10 Msec=750 True Az=126.525 Ze=38.505 Az status=0009 Ze status=0008 07:02:10 Check angles 07:02:10 SkyScan query 07:02:11 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 07:02:11 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 07:02:11 Check angles 07:02:11 SkyScan query 07:02:12 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 07:02:12 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 07:02:12 Check angles 07:02:12 SkyScan query 07:02:13 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:02:13 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:02:13 Check angles 07:02:13 SkyScan query 07:02:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:02:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:02:13 Message to Master queued w/err=0: serial=134613 error=0 07:02:18 Received message from Master: op=Filter serial=134614 07:02:18 Color wheel filter change from 0 to 0 07:02:18 FLIGetFilterPos err=0 currentPosition=0 07:02:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:18 Filter is already there-color wheel unchanged 07:02:18 Received message from Master: op=Shutter serial=134615 07:02:18 Shutter LASER close 07:02:18 Received message from Camera: op=State serial=134617 07:02:18 GetSingleValue result=40 Value=cccccccc 07:02:18 SkyScan query 07:02:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:02:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:19 Parameters OK 07:02:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:19 Set A/D data flow result=40 07:02:19 Set A/D channel type result=40 07:02:19 Set A/D encoding result=40 07:02:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:19 Set channel filter=0.000000e+000 result=40 07:02:19 Config A/D Result=40 07:02:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:19 Get A/D filter: -9.255963e+061 result=40 07:02:19 Get A/D value=-858993460 result=40 07:02:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:19 Parameters OK 07:02:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:19 Set A/D data flow result=40 07:02:19 Set A/D channel type result=40 07:02:19 Set A/D encoding result=40 07:02:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:19 Set channel filter=0.000000e+000 result=40 07:02:19 Config A/D Result=40 07:02:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:19 Get A/D filter: -9.255963e+061 result=40 07:02:19 Get A/D value=-858993460 result=40 07:02:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:19 Aux= 07:02:19 Message to Camera, serial 134617 queued 07:02:56 Received message from Master: op=PointingHead serial=134630 07:02:56 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:02:56 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:02:56 Point started: ret=0 07:02:56 point_skyscan result=0 07:02:57 Check angles 07:02:57 SkyScan query 07:02:58 SkyScan query done: ret=0 az=153.285<-10219 ze=9.015<-11399 Statuses=0009 0009 07:02:58 Msec=0 True Az=153.285 Ze=9.015 Az status=0009 Ze status=0009 07:02:58 Check angles 07:02:58 SkyScan query 07:02:58 SkyScan query done: ret=0 az=135.885<-9059 ze=-11.985<-12799 Statuses=0009 0009 07:02:58 Msec=750 True Az=135.885 Ze=-11.985 Az status=0009 Ze status=0009 07:02:58 Check angles 07:02:58 SkyScan query 07:02:59 SkyScan query done: ret=0 az=118.275<-7885 ze=-32.925<-14195 Statuses=0009 0009 07:02:59 Msec=1500 True Az=118.275 Ze=-32.925 Az status=0009 Ze status=0009 07:02:59 Check angles 07:02:59 SkyScan query 07:03:00 SkyScan query done: ret=0 az=100.845<-6723 ze=-51.51<-15434 Statuses=0009 0009 07:03:00 Msec=2250 True Az=100.845 Ze=-51.51 Az status=0009 Ze status=0009 07:03:00 Check angles 07:03:00 SkyScan query 07:03:01 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 07:03:01 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 07:03:01 Check angles 07:03:01 SkyScan query 07:03:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:03:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:03:01 Message to Master queued w/err=0: serial=134630 error=0 07:03:06 Received message from Master: op=Filter serial=134631 07:03:06 Color wheel filter change from 0 to 0 07:03:06 FLIGetFilterPos err=0 currentPosition=0 07:03:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:06 Filter is already there-color wheel unchanged 07:03:06 Received message from Master: op=Shutter serial=134632 07:03:06 Shutter LASER close 07:03:07 Received message from Camera: op=State serial=134634 07:03:07 GetSingleValue result=40 Value=cccccccc 07:03:07 SkyScan query 07:03:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:03:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:07 Parameters OK 07:03:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:07 Set A/D data flow result=40 07:03:07 Set A/D channel type result=40 07:03:07 Set A/D encoding result=40 07:03:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:07 Set channel filter=0.000000e+000 result=40 07:03:07 Config A/D Result=40 07:03:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:07 Get A/D filter: -9.255963e+061 result=40 07:03:07 Get A/D value=-858993460 result=40 07:03:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:07 Parameters OK 07:03:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:07 Set A/D data flow result=40 07:03:07 Set A/D channel type result=40 07:03:07 Set A/D encoding result=40 07:03:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:07 Set channel filter=0.000000e+000 result=40 07:03:07 Config A/D Result=40 07:03:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:07 Get A/D filter: -9.255963e+061 result=40 07:03:07 Get A/D value=-858993460 result=40 07:03:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:07 Aux= 07:03:07 Message to Camera, serial 134634 queued 07:03:44 Received message from Master: op=PointingHead serial=134647 07:03:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:03:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:03:44 Point started: ret=0 07:03:44 point_skyscan result=0 07:03:45 Check angles 07:03:45 SkyScan query 07:03:46 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.03<-17402 Statuses=0009 0009 07:03:46 Msec=0 True Az=108.795 Ze=-81.03 Az status=0009 Ze status=0009 07:03:46 Check angles 07:03:46 SkyScan query 07:03:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 07:03:46 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 07:03:47 Check angles 07:03:47 SkyScan query 07:03:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.405<-20227 Statuses=0008 0009 07:03:47 Msec=1500 True Az=112.995 Ze=-123.405 Az status=0008 Ze status=0009 07:03:47 Check angles 07:03:47 SkyScan query 07:03:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 07:03:48 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 07:03:48 Check angles 07:03:48 SkyScan query 07:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.3<-23020 Statuses=0008 0009 07:03:49 Msec=3000 True Az=112.995 Ze=-165.3 Az status=0008 Ze status=0009 07:03:49 Check angles 07:03:49 SkyScan query 07:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:03:49 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:03:49 Message to Master queued w/err=0: serial=134647 error=0 07:03:54 Received message from Master: op=Filter serial=134648 07:03:54 Color wheel filter change from 0 to 0 07:03:54 FLIGetFilterPos err=0 currentPosition=0 07:03:54 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:54 Filter is already there-color wheel unchanged 07:03:55 Received message from Master: op=Shutter serial=134649 07:03:55 Shutter LASER open 07:03:55 Received message from Camera: op=State serial=134651 07:03:55 GetSingleValue result=40 Value=cccccccc 07:03:55 SkyScan query 07:03:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:03:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:55 Parameters OK 07:03:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:55 Set A/D data flow result=40 07:03:55 Set A/D channel type result=40 07:03:55 Set A/D encoding result=40 07:03:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:55 Set channel filter=0.000000e+000 result=40 07:03:55 Config A/D Result=40 07:03:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:55 Get A/D filter: -9.255963e+061 result=40 07:03:55 Get A/D value=-858993460 result=40 07:03:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:55 Parameters OK 07:03:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:55 Set A/D data flow result=40 07:03:55 Set A/D channel type result=40 07:03:55 Set A/D encoding result=40 07:03:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:55 Set channel filter=0.000000e+000 result=40 07:03:55 Config A/D Result=40 07:03:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:55 Get A/D filter: -9.255963e+061 result=40 07:03:55 Get A/D value=-858993460 result=40 07:03:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:55 Aux= 07:03:55 Message to Camera, serial 134651 queued 07:04:04 Received message from Master: op=Shutter serial=134661 07:04:04 Shutter LASER close 07:04:04 Received message from Master: op=PointingHead serial=134665 07:04:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:04:04 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:04:05 Point started: ret=0 07:04:05 point_skyscan result=0 07:04:05 Check angles 07:04:05 SkyScan query 07:04:06 SkyScan query done: ret=0 az=89.625<-5975 ze=156.93<-1538 Statuses=0009 0009 07:04:06 Msec=0 True Az=89.625 Ze=156.93 Az status=0009 Ze status=0009 07:04:06 Check angles 07:04:06 SkyScan query 07:04:07 SkyScan query done: ret=0 az=71.775<-4785 ze=135.525<-2965 Statuses=0009 0009 07:04:07 Msec=750 True Az=71.775 Ze=135.525 Az status=0009 Ze status=0009 07:04:07 Check angles 07:04:07 SkyScan query 07:04:07 SkyScan query done: ret=0 az=54.42<-3628 ze=114.525<-4365 Statuses=0009 0009 07:04:07 Msec=1500 True Az=54.42 Ze=114.525 Az status=0009 Ze status=0009 07:04:08 Check angles 07:04:08 SkyScan query 07:04:08 SkyScan query done: ret=0 az=40.98<-2732 ze=93.63<-5758 Statuses=0009 0009 07:04:08 Msec=2250 True Az=40.98 Ze=93.63 Az status=0009 Ze status=0009 07:04:08 Check angles 07:04:08 SkyScan query 07:04:09 SkyScan query done: ret=0 az=40.995<-2733 ze=72.225<-7185 Statuses=0008 0009 07:04:09 Msec=3000 True Az=40.995 Ze=72.225 Az status=0008 Ze status=0009 07:04:09 Check angles 07:04:09 SkyScan query 07:04:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.155<-8523 Statuses=0008 0009 07:04:10 Msec=3750 True Az=40.995 Ze=52.155 Az status=0008 Ze status=0009 07:04:10 Check angles 07:04:10 SkyScan query 07:04:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:04:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:04:10 Message to Master queued w/err=0: serial=134665 error=0 07:04:15 Received message from Master: op=Filter serial=134666 07:04:15 Color wheel filter change from 0 to 0 07:04:15 FLIGetFilterPos err=0 currentPosition=0 07:04:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:15 Filter is already there-color wheel unchanged 07:04:16 Received message from Master: op=Shutter serial=134667 07:04:16 Shutter LASER close 07:04:16 Received message from Camera: op=State serial=134669 07:04:16 GetSingleValue result=40 Value=cccccccc 07:04:16 SkyScan query 07:04:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:04:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:16 Parameters OK 07:04:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:16 Set A/D data flow result=40 07:04:16 Set A/D channel type result=40 07:04:16 Set A/D encoding result=40 07:04:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:16 Set channel filter=0.000000e+000 result=40 07:04:16 Config A/D Result=40 07:04:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:16 Get A/D filter: -9.255963e+061 result=40 07:04:16 Get A/D value=-858993460 result=40 07:04:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:16 Parameters OK 07:04:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:16 Set A/D data flow result=40 07:04:16 Set A/D channel type result=40 07:04:16 Set A/D encoding result=40 07:04:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:16 Set channel filter=0.000000e+000 result=40 07:04:16 Config A/D Result=40 07:04:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:16 Get A/D filter: -9.255963e+061 result=40 07:04:16 Get A/D value=-858993460 result=40 07:04:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:16 Aux= 07:04:16 Message to Camera, serial 134669 queued 07:04:53 Received message from Master: op=PointingHead serial=134682 07:04:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:04:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:04:53 Point started: ret=0 07:04:53 point_skyscan result=0 07:04:54 Check angles 07:04:54 SkyScan query 07:04:55 SkyScan query done: ret=0 az=64.185<-4279 ze=66.555<-7563 Statuses=0009 0008 07:04:55 Msec=0 True Az=64.185 Ze=66.555 Az status=0009 Ze status=0008 07:04:55 Check angles 07:04:55 SkyScan query 07:04:56 SkyScan query done: ret=0 az=81.645<-5443 ze=66.495<-7567 Statuses=0009 0008 07:04:56 Msec=750 True Az=81.645 Ze=66.495 Az status=0009 Ze status=0008 07:04:56 Check angles 07:04:56 SkyScan query 07:04:56 SkyScan query done: ret=0 az=99.18<-6612 ze=66.495<-7567 Statuses=0009 0008 07:04:56 Msec=1500 True Az=99.18 Ze=66.495 Az status=0009 Ze status=0008 07:04:56 Check angles 07:04:56 SkyScan query 07:04:57 SkyScan query done: ret=0 az=117.06<-7804 ze=66.495<-7567 Statuses=0009 0008 07:04:57 Msec=2250 True Az=117.06 Ze=66.495 Az status=0009 Ze status=0008 07:04:57 Check angles 07:04:57 SkyScan query 07:04:58 SkyScan query done: ret=0 az=134.505<-8967 ze=66.495<-7567 Statuses=0009 0008 07:04:58 Msec=3000 True Az=134.505 Ze=66.495 Az status=0009 Ze status=0008 07:04:58 Check angles 07:04:58 SkyScan query 07:04:59 SkyScan query done: ret=0 az=152.25<-10150 ze=66.495<-7567 Statuses=0009 0008 07:04:59 Msec=3750 True Az=152.25 Ze=66.495 Az status=0009 Ze status=0008 07:04:59 Check angles 07:04:59 SkyScan query 07:04:59 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:04:59 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:04:59 Message to Master queued w/err=0: serial=134682 error=0 07:05:04 Received message from Master: op=Filter serial=134683 07:05:04 Color wheel filter change from 0 to 0 07:05:04 FLIGetFilterPos err=0 currentPosition=0 07:05:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:04 Filter is already there-color wheel unchanged 07:05:04 Received message from Master: op=Shutter serial=134684 07:05:04 Shutter LASER close 07:05:05 Received message from Camera: op=State serial=134686 07:05:05 GetSingleValue result=40 Value=cccccccc 07:05:05 SkyScan query 07:05:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:05:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:05 Parameters OK 07:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:05 Set A/D data flow result=40 07:05:05 Set A/D channel type result=40 07:05:05 Set A/D encoding result=40 07:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:05 Set channel filter=0.000000e+000 result=40 07:05:05 Config A/D Result=40 07:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:05 Get A/D filter: -9.255963e+061 result=40 07:05:05 Get A/D value=-858993460 result=40 07:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:05 Parameters OK 07:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:05 Set A/D data flow result=40 07:05:05 Set A/D channel type result=40 07:05:05 Set A/D encoding result=40 07:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:05 Set channel filter=0.000000e+000 result=40 07:05:05 Config A/D Result=40 07:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:05 Get A/D filter: -9.255963e+061 result=40 07:05:05 Get A/D value=-858993460 result=40 07:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:05 Aux= 07:05:05 Message to Camera, serial 134686 queued [UTC 2018-12-14 07:05:42] 07:05:42 Received message from Master: op=PointingHead serial=134699 07:05:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:05:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:05:42 Point started: ret=0 07:05:42 point_skyscan result=0 07:05:43 Check angles 07:05:43 SkyScan query 07:05:44 SkyScan query done: ret=0 az=135.03<-9002 ze=36.795<-9547 Statuses=0009 0009 07:05:44 Msec=0 True Az=135.03 Ze=36.795 Az status=0009 Ze status=0009 07:05:44 Check angles 07:05:44 SkyScan query 07:05:44 SkyScan query done: ret=0 az=117.57<-7838 ze=15.855<-10943 Statuses=0009 0009 07:05:44 Msec=750 True Az=117.57 Ze=15.855 Az status=0009 Ze status=0009 07:05:45 Check angles 07:05:45 SkyScan query 07:05:45 SkyScan query done: ret=0 az=99.6<-6640 ze=-5.55<-12370 Statuses=0009 0009 07:05:45 Msec=1500 True Az=99.6 Ze=-5.55 Az status=0009 Ze status=0009 07:05:45 Check angles 07:05:45 SkyScan query 07:05:46 SkyScan query done: ret=0 az=81.855<-5457 ze=-27<-13800 Statuses=0009 0009 07:05:46 Msec=2250 True Az=81.855 Ze=-27 Az status=0009 Ze status=0009 07:05:46 Check angles 07:05:46 SkyScan query 07:05:47 SkyScan query done: ret=0 az=64.425<-4295 ze=-38.58<-14572 Statuses=0009 0008 07:05:47 Msec=3000 True Az=64.425 Ze=-38.58 Az status=0009 Ze status=0008 07:05:47 Check angles 07:05:47 SkyScan query 07:05:47 SkyScan query done: ret=0 az=46.905<-3127 ze=-38.52<-14568 Statuses=0009 0008 07:05:47 Msec=3750 True Az=46.905 Ze=-38.52 Az status=0009 Ze status=0008 07:05:48 Check angles 07:05:48 SkyScan query 07:05:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:05:48 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:05:48 Message to Master queued w/err=0: serial=134699 error=0 07:05:53 Received message from Master: op=Filter serial=134700 07:05:53 Color wheel filter change from 0 to 0 07:05:53 FLIGetFilterPos err=0 currentPosition=0 07:05:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:53 Filter is already there-color wheel unchanged 07:05:53 Received message from Master: op=Shutter serial=134701 07:05:53 Shutter LASER close 07:05:53 Received message from Camera: op=State serial=134703 07:05:53 GetSingleValue result=40 Value=cccccccc 07:05:53 SkyScan query 07:05:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:05:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:54 Parameters OK 07:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:54 Set A/D data flow result=40 07:05:54 Set A/D channel type result=40 07:05:54 Set A/D encoding result=40 07:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:54 Set channel filter=0.000000e+000 result=40 07:05:54 Config A/D Result=40 07:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:54 Get A/D filter: -9.255963e+061 result=40 07:05:54 Get A/D value=-858993460 result=40 07:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:54 Parameters OK 07:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:54 Set A/D data flow result=40 07:05:54 Set A/D channel type result=40 07:05:54 Set A/D encoding result=40 07:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:54 Set channel filter=0.000000e+000 result=40 07:05:54 Config A/D Result=40 07:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:54 Get A/D filter: -9.255963e+061 result=40 07:05:54 Get A/D value=-858993460 result=40 07:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:54 Aux= 07:05:54 Message to Camera, serial 134703 queued 07:06:30 Received message from Master: op=PointingHead serial=134715 07:06:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:06:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:06:30 Point started: ret=0 07:06:30 point_skyscan result=0 07:06:31 Check angles 07:06:31 SkyScan query 07:06:32 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.67<-16578 Statuses=0009 0009 07:06:32 Msec=0 True Az=64.245 Ze=-68.67 Az status=0009 Ze status=0009 07:06:32 Check angles 07:06:32 SkyScan query 07:06:32 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.64<-17976 Statuses=0009 0009 07:06:32 Msec=750 True Az=81.735 Ze=-89.64 Az status=0009 Ze status=0009 07:06:33 Check angles 07:06:33 SkyScan query 07:06:33 SkyScan query done: ret=0 az=99.525<-6635 ze=-111.015<-19401 Statuses=0009 0009 07:06:33 Msec=1500 True Az=99.525 Ze=-111.015 Az status=0009 Ze status=0009 07:06:33 Check angles 07:06:33 SkyScan query 07:06:34 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.91<-20794 Statuses=0009 0009 07:06:34 Msec=2250 True Az=117.09 Ze=-131.91 Az status=0009 Ze status=0009 07:06:34 Check angles 07:06:34 SkyScan query 07:06:35 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 07:06:35 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 07:06:35 Check angles 07:06:35 SkyScan query 07:06:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 07:06:35 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 07:06:35 Message to Master queued w/err=0: serial=134715 error=0 07:06:40 Received message from Master: op=Filter serial=134716 07:06:40 Color wheel filter change from 0 to 0 07:06:40 FLIGetFilterPos err=0 currentPosition=0 07:06:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:40 Filter is already there-color wheel unchanged 07:06:41 Received message from Master: op=Shutter serial=134717 07:06:41 Shutter LASER close 07:06:41 Received message from Camera: op=State serial=134719 07:06:41 GetSingleValue result=40 Value=cccccccc 07:06:41 SkyScan query 07:06:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:06:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:41 Parameters OK 07:06:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:41 Set A/D data flow result=40 07:06:41 Set A/D channel type result=40 07:06:41 Set A/D encoding result=40 07:06:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:41 Set channel filter=0.000000e+000 result=40 07:06:41 Config A/D Result=40 07:06:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:41 Get A/D filter: -9.255963e+061 result=40 07:06:41 Get A/D value=-858993460 result=40 07:06:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:41 Parameters OK 07:06:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:41 Set A/D data flow result=40 07:06:41 Set A/D channel type result=40 07:06:41 Set A/D encoding result=40 07:06:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:41 Set channel filter=0.000000e+000 result=40 07:06:41 Config A/D Result=40 07:06:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:41 Get A/D filter: -9.255963e+061 result=40 07:06:41 Get A/D value=-858993460 result=40 07:06:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:41 Aux= 07:06:41 Message to Camera, serial 134719 queued 07:07:18 Received message from Master: op=PointingHead serial=134732 07:07:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:07:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:07:18 Point started: ret=0 07:07:18 point_skyscan result=0 07:07:19 Check angles 07:07:19 SkyScan query 07:07:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.27<-23418 Statuses=0009 0009 07:07:20 Msec=0 True Az=112.995 Ze=-171.27 Az status=0009 Ze status=0009 07:07:20 Check angles 07:07:20 SkyScan query 07:07:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:07:20 Msec=750 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 07:07:20 Message to Master queued w/err=0: serial=134732 error=0 07:07:25 Received message from Master: op=Filter serial=134733 07:07:25 Color wheel filter change from 0 to 0 07:07:25 FLIGetFilterPos err=0 currentPosition=0 07:07:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:25 Filter is already there-color wheel unchanged 07:07:26 Received message from Master: op=Shutter serial=134734 07:07:26 Shutter LASER open 07:07:26 Received message from Camera: op=State serial=134736 07:07:26 GetSingleValue result=40 Value=cccccccc 07:07:26 SkyScan query 07:07:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.98<-23532 Statuses=0008 0008 07:07:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:26 Parameters OK 07:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:26 Set A/D data flow result=40 07:07:26 Set A/D channel type result=40 07:07:26 Set A/D encoding result=40 07:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:26 Set channel filter=0.000000e+000 result=40 07:07:26 Config A/D Result=40 07:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:26 Get A/D filter: -9.255963e+061 result=40 07:07:26 Get A/D value=-858993460 result=40 07:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:26 Parameters OK 07:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:26 Set A/D data flow result=40 07:07:26 Set A/D channel type result=40 07:07:26 Set A/D encoding result=40 07:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:26 Set channel filter=0.000000e+000 result=40 07:07:26 Config A/D Result=40 07:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:26 Get A/D filter: -9.255963e+061 result=40 07:07:26 Get A/D value=-858993460 result=40 07:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.979996 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:26 Aux= 07:07:26 Message to Camera, serial 134736 queued 07:07:35 Received message from Master: op=Shutter serial=134746 07:07:35 Shutter LASER close 07:07:35 Received message from Master: op=PointingHead serial=134750 07:07:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:07:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:07:36 Point started: ret=0 07:07:36 point_skyscan result=0 07:07:37 Check angles 07:07:37 SkyScan query 07:07:37 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.04<-21536 Statuses=0009 0009 07:07:37 Msec=0 True Az=136.17 Ze=-143.04 Az status=0009 Ze status=0009 07:07:37 Check angles 07:07:37 SkyScan query 07:07:38 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.085<-20139 Statuses=0009 0009 07:07:38 Msec=750 True Az=153.615 Ze=-122.085 Az status=0009 Ze status=0009 07:07:38 Check angles 07:07:38 SkyScan query 07:07:39 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.13<-18742 Statuses=0009 0009 07:07:39 Msec=1500 True Az=171.24 Ze=-101.13 Az status=0009 Ze status=0009 07:07:39 Check angles 07:07:39 SkyScan query 07:07:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.22<-17348 Statuses=0008 0009 07:07:39 Msec=2250 True Az=176.01 Ze=-80.22 Az status=0008 Ze status=0009 07:07:40 Check angles 07:07:40 SkyScan query 07:07:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.22<-15948 Statuses=0008 0009 07:07:40 Msec=3000 True Az=176.01 Ze=-59.22 Az status=0008 Ze status=0009 07:07:40 Check angles 07:07:40 SkyScan query 07:07:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:07:41 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:07:41 Message to Master queued w/err=0: serial=134750 error=0 07:07:46 Received message from Master: op=Filter serial=134751 07:07:46 Color wheel filter change from 0 to 0 07:07:46 FLIGetFilterPos err=0 currentPosition=0 07:07:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:46 Filter is already there-color wheel unchanged 07:07:46 Received message from Master: op=Shutter serial=134752 07:07:46 Shutter LASER close 07:07:46 Received message from Camera: op=State serial=134754 07:07:46 GetSingleValue result=40 Value=cccccccc 07:07:46 SkyScan query 07:07:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:07:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:47 Parameters OK 07:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:47 Set A/D data flow result=40 07:07:47 Set A/D channel type result=40 07:07:47 Set A/D encoding result=40 07:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:47 Set channel filter=0.000000e+000 result=40 07:07:47 Config A/D Result=40 07:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:47 Get A/D filter: -9.255963e+061 result=40 07:07:47 Get A/D value=-858993460 result=40 07:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:47 Parameters OK 07:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:47 Set A/D data flow result=40 07:07:47 Set A/D channel type result=40 07:07:47 Set A/D encoding result=40 07:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:47 Set channel filter=0.000000e+000 result=40 07:07:47 Config A/D Result=40 07:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:47 Get A/D filter: -9.255963e+061 result=40 07:07:47 Get A/D value=-858993460 result=40 07:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:47 Aux= 07:07:47 Message to Camera, serial 134754 queued 07:08:24 Received message from Master: op=PointingHead serial=134767 07:08:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:08:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:08:24 Point started: ret=0 07:08:24 point_skyscan result=0 07:08:25 Check angles 07:08:25 SkyScan query 07:08:25 SkyScan query done: ret=0 az=153.18<-10212 ze=-22.05<-13470 Statuses=0009 0009 07:08:25 Msec=0 True Az=153.18 Ze=-22.05 Az status=0009 Ze status=0009 07:08:25 Check angles 07:08:25 SkyScan query 07:08:26 SkyScan query done: ret=0 az=135.735<-9049 ze=-1.05<-12070 Statuses=0009 0009 07:08:26 Msec=750 True Az=135.735 Ze=-1.05 Az status=0009 Ze status=0009 07:08:26 Check angles 07:08:26 SkyScan query 07:08:27 SkyScan query done: ret=0 az=118.185<-7879 ze=19.86<-10676 Statuses=0009 0009 07:08:27 Msec=1500 True Az=118.185 Ze=19.86 Az status=0009 Ze status=0009 07:08:27 Check angles 07:08:27 SkyScan query 07:08:28 SkyScan query done: ret=0 az=100.74<-6716 ze=40.875<-9275 Statuses=0009 0009 07:08:28 Msec=2250 True Az=100.74 Ze=40.875 Az status=0009 Ze status=0009 07:08:28 Check angles 07:08:28 SkyScan query 07:08:28 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 07:08:28 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 07:08:28 Check angles 07:08:28 SkyScan query 07:08:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:08:29 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:08:29 Message to Master queued w/err=0: serial=134767 error=0 07:08:34 Received message from Master: op=Filter serial=134768 07:08:34 Color wheel filter change from 0 to 0 07:08:34 FLIGetFilterPos err=0 currentPosition=0 07:08:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:34 Filter is already there-color wheel unchanged 07:08:34 Received message from Master: op=Shutter serial=134769 07:08:34 Shutter LASER close 07:08:34 Received message from Camera: op=State serial=134771 07:08:34 GetSingleValue result=40 Value=cccccccc 07:08:34 SkyScan query 07:08:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:08:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:35 Parameters OK 07:08:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:35 Set A/D data flow result=40 07:08:35 Set A/D channel type result=40 07:08:35 Set A/D encoding result=40 07:08:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:35 Set channel filter=0.000000e+000 result=40 07:08:35 Config A/D Result=40 07:08:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:35 Get A/D filter: -9.255963e+061 result=40 07:08:35 Get A/D value=-858993460 result=40 07:08:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:35 Parameters OK 07:08:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:35 Set A/D data flow result=40 07:08:35 Set A/D channel type result=40 07:08:35 Set A/D encoding result=40 07:08:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:35 Set channel filter=0.000000e+000 result=40 07:08:35 Config A/D Result=40 07:08:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:35 Get A/D filter: -9.255963e+061 result=40 07:08:35 Get A/D value=-858993460 result=40 07:08:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:35 Aux= 07:08:35 Message to Camera, serial 134771 queued 07:09:12 Received message from Master: op=PointingHead serial=134784 07:09:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:09:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:09:12 Point started: ret=0 07:09:12 point_skyscan result=0 07:09:13 Check angles 07:09:13 SkyScan query 07:09:13 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 07:09:13 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 07:09:13 Check angles 07:09:13 SkyScan query 07:09:14 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 07:09:14 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 07:09:14 Check angles 07:09:14 SkyScan query 07:09:15 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 07:09:15 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 07:09:15 Check angles 07:09:15 SkyScan query 07:09:16 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 07:09:16 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 07:09:16 Check angles 07:09:16 SkyScan query 07:09:16 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:09:16 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:09:16 Check angles 07:09:16 SkyScan query 07:09:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:09:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:09:17 Message to Master queued w/err=0: serial=134784 error=0 07:09:22 Received message from Master: op=Filter serial=134785 07:09:22 Color wheel filter change from 0 to 0 07:09:22 FLIGetFilterPos err=0 currentPosition=0 07:09:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:22 Filter is already there-color wheel unchanged 07:09:22 Received message from Master: op=Shutter serial=134786 07:09:22 Shutter LASER close 07:09:22 Received message from Camera: op=State serial=134788 07:09:22 GetSingleValue result=40 Value=cccccccc 07:09:22 SkyScan query 07:09:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:09:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:23 Parameters OK 07:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:23 Set A/D data flow result=40 07:09:23 Set A/D channel type result=40 07:09:23 Set A/D encoding result=40 07:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:23 Set channel filter=0.000000e+000 result=40 07:09:23 Config A/D Result=40 07:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:23 Get A/D filter: -9.255963e+061 result=40 07:09:23 Get A/D value=-858993460 result=40 07:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:23 Parameters OK 07:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:23 Set A/D data flow result=40 07:09:23 Set A/D channel type result=40 07:09:23 Set A/D encoding result=40 07:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:23 Set channel filter=0.000000e+000 result=40 07:09:23 Config A/D Result=40 07:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:23 Get A/D filter: -9.255963e+061 result=40 07:09:23 Get A/D value=-858993460 result=40 07:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:23 Aux= 07:09:23 Message to Camera, serial 134788 queued 07:10:00 Received message from Master: op=PointingHead serial=134801 07:10:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:10:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:10:00 Point started: ret=0 07:10:00 point_skyscan result=0 07:10:01 Check angles 07:10:01 SkyScan query 07:10:01 SkyScan query done: ret=0 az=153.285<-10219 ze=9.03<-11398 Statuses=0009 0009 07:10:01 Msec=0 True Az=153.285 Ze=9.03 Az status=0009 Ze status=0009 07:10:02 Check angles 07:10:02 SkyScan query 07:10:02 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.36<-12824 Statuses=0009 0009 07:10:02 Msec=750 True Az=135.345 Ze=-12.36 Az status=0009 Ze status=0009 07:10:02 Check angles 07:10:02 SkyScan query 07:10:03 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.33<-14222 Statuses=0009 0009 07:10:03 Msec=1500 True Az=117.93 Ze=-33.33 Az status=0009 Ze status=0009 07:10:03 Check angles 07:10:03 SkyScan query 07:10:04 SkyScan query done: ret=0 az=100.575<-6705 ze=-51.54<-15436 Statuses=0009 0009 07:10:04 Msec=2250 True Az=100.575 Ze=-51.54 Az status=0009 Ze status=0009 07:10:04 Check angles 07:10:04 SkyScan query 07:10:04 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:10:04 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:10:05 Check angles 07:10:05 SkyScan query 07:10:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:10:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:10:05 Message to Master queued w/err=0: serial=134801 error=0 07:10:10 Received message from Master: op=Filter serial=134802 07:10:10 Color wheel filter change from 0 to 0 07:10:10 FLIGetFilterPos err=0 currentPosition=0 07:10:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:10 Filter is already there-color wheel unchanged 07:10:10 Received message from Master: op=Shutter serial=134803 07:10:10 Shutter LASER close 07:10:10 Received message from Camera: op=State serial=134805 07:10:10 GetSingleValue result=40 Value=cccccccc 07:10:10 SkyScan query 07:10:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:10:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:11 Parameters OK 07:10:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:11 Set A/D data flow result=40 07:10:11 Set A/D channel type result=40 07:10:11 Set A/D encoding result=40 07:10:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:11 Set channel filter=0.000000e+000 result=40 07:10:11 Config A/D Result=40 07:10:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:11 Get A/D filter: -9.255963e+061 result=40 07:10:11 Get A/D value=-858993460 result=40 07:10:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:11 Parameters OK 07:10:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:11 Set A/D data flow result=40 07:10:11 Set A/D channel type result=40 07:10:11 Set A/D encoding result=40 07:10:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:11 Set channel filter=0.000000e+000 result=40 07:10:11 Config A/D Result=40 07:10:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:11 Get A/D filter: -9.255963e+061 result=40 07:10:11 Get A/D value=-858993460 result=40 07:10:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:11 Aux= 07:10:11 Message to Camera, serial 134805 queued 07:10:48 Received message from Master: op=PointingHead serial=134818 07:10:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:10:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:10:48 Point started: ret=0 07:10:48 point_skyscan result=0 07:10:49 Check angles 07:10:49 SkyScan query 07:10:50 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.405<-17427 Statuses=0009 0009 07:10:50 Msec=0 True Az=109.14 Ze=-81.405 Az status=0009 Ze status=0009 07:10:50 Check angles 07:10:50 SkyScan query 07:10:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 07:10:50 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 07:10:50 Check angles 07:10:50 SkyScan query 07:10:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.17<-20278 Statuses=0008 0009 07:10:51 Msec=1500 True Az=112.995 Ze=-124.17 Az status=0008 Ze status=0009 07:10:51 Check angles 07:10:51 SkyScan query 07:10:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.11<-21674 Statuses=0008 0009 07:10:52 Msec=2250 True Az=112.995 Ze=-145.11 Az status=0008 Ze status=0009 07:10:52 Check angles 07:10:52 SkyScan query 07:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.05<-23070 Statuses=0008 0009 07:10:53 Msec=3000 True Az=112.995 Ze=-166.05 Az status=0008 Ze status=0009 07:10:53 Check angles 07:10:53 SkyScan query 07:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:10:53 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:10:53 Message to Master queued w/err=0: serial=134818 error=0 07:10:58 Received message from Master: op=Filter serial=134819 07:10:58 Color wheel filter change from 0 to 0 07:10:58 FLIGetFilterPos err=0 currentPosition=0 07:10:58 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:58 Filter is already there-color wheel unchanged 07:10:58 Received message from Master: op=Shutter serial=134820 07:10:58 Shutter LASER open 07:10:59 Received message from Camera: op=State serial=134822 07:10:59 GetSingleValue result=40 Value=cccccccc 07:10:59 SkyScan query 07:10:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:10:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:59 Parameters OK 07:10:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:59 Set A/D data flow result=40 07:10:59 Set A/D channel type result=40 07:10:59 Set A/D encoding result=40 07:10:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:59 Set channel filter=0.000000e+000 result=40 07:10:59 Config A/D Result=40 07:10:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:59 Get A/D filter: -9.255963e+061 result=40 07:10:59 Get A/D value=-858993460 result=40 07:10:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:59 Parameters OK 07:10:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:59 Set A/D data flow result=40 07:10:59 Set A/D channel type result=40 07:10:59 Set A/D encoding result=40 07:10:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:59 Set channel filter=0.000000e+000 result=40 07:10:59 Config A/D Result=40 07:10:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:59 Get A/D filter: -9.255963e+061 result=40 07:10:59 Get A/D value=-858993460 result=40 07:10:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:59 Aux= 07:10:59 Message to Camera, serial 134822 queued 07:11:08 Received message from Master: op=Shutter serial=134832 07:11:08 Shutter LASER close 07:11:08 Received message from Master: op=PointingHead serial=134836 07:11:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:11:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:11:08 Point started: ret=0 07:11:08 point_skyscan result=0 07:11:09 Check angles 07:11:09 SkyScan query 07:11:10 SkyScan query done: ret=0 az=90<-6000 ze=157.335<-1511 Statuses=0009 0009 07:11:10 Msec=0 True Az=90 Ze=157.335 Az status=0009 Ze status=0009 07:11:10 Check angles 07:11:10 SkyScan query 07:11:11 SkyScan query done: ret=0 az=72.51<-4834 ze=136.365<-2909 Statuses=0009 0009 07:11:11 Msec=750 True Az=72.51 Ze=136.365 Az status=0009 Ze status=0009 07:11:11 Check angles 07:11:11 SkyScan query 07:11:11 SkyScan query done: ret=0 az=55.155<-3677 ze=115.425<-4305 Statuses=0009 0009 07:11:11 Msec=1500 True Az=55.155 Ze=115.425 Az status=0009 Ze status=0009 07:11:11 Check angles 07:11:11 SkyScan query 07:11:12 SkyScan query done: ret=0 az=41.025<-2735 ze=94.44<-5704 Statuses=0009 0009 07:11:12 Msec=2250 True Az=41.025 Ze=94.44 Az status=0009 Ze status=0009 07:11:12 Check angles 07:11:12 SkyScan query 07:11:13 SkyScan query done: ret=0 az=40.995<-2733 ze=73.5<-7100 Statuses=0008 0009 07:11:13 Msec=3000 True Az=40.995 Ze=73.5 Az status=0008 Ze status=0009 07:11:13 Check angles 07:11:13 SkyScan query 07:11:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.905<-8473 Statuses=0008 0009 07:11:14 Msec=3750 True Az=40.995 Ze=52.905 Az status=0008 Ze status=0009 07:11:14 Check angles 07:11:14 SkyScan query 07:11:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:11:14 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:11:14 Message to Master queued w/err=0: serial=134836 error=0 07:11:19 Received message from Master: op=Filter serial=134837 07:11:19 Color wheel filter change from 0 to 0 07:11:19 FLIGetFilterPos err=0 currentPosition=0 07:11:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:19 Filter is already there-color wheel unchanged 07:11:19 Received message from Master: op=Shutter serial=134838 07:11:19 Shutter LASER close 07:11:20 Received message from Camera: op=State serial=134840 07:11:20 GetSingleValue result=40 Value=cccccccc 07:11:20 SkyScan query 07:11:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:11:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:20 Parameters OK 07:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:20 Set A/D data flow result=40 07:11:20 Set A/D channel type result=40 07:11:20 Set A/D encoding result=40 07:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:20 Set channel filter=0.000000e+000 result=40 07:11:20 Config A/D Result=40 07:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:20 Get A/D filter: -9.255963e+061 result=40 07:11:20 Get A/D value=-858993460 result=40 07:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:20 Parameters OK 07:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:20 Set A/D data flow result=40 07:11:20 Set A/D channel type result=40 07:11:20 Set A/D encoding result=40 07:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:20 Set channel filter=0.000000e+000 result=40 07:11:20 Config A/D Result=40 07:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:20 Get A/D filter: -9.255963e+061 result=40 07:11:20 Get A/D value=-858993460 result=40 07:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:20 Aux= 07:11:20 Message to Camera, serial 134840 queued 07:11:57 Received message from Master: op=PointingHead serial=134853 07:11:57 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:11:57 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:11:57 Point started: ret=0 07:11:57 point_skyscan result=0 07:11:58 Check angles 07:11:58 SkyScan query 07:11:59 SkyScan query done: ret=0 az=64.08<-4272 ze=66.555<-7563 Statuses=0009 0008 07:11:59 Msec=0 True Az=64.08 Ze=66.555 Az status=0009 Ze status=0008 07:11:59 Check angles 07:11:59 SkyScan query 07:11:59 SkyScan query done: ret=0 az=81.945<-5463 ze=66.495<-7567 Statuses=0009 0008 07:11:59 Msec=750 True Az=81.945 Ze=66.495 Az status=0009 Ze status=0008 07:12:00 Check angles 07:12:00 SkyScan query 07:12:00 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 07:12:00 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 07:12:00 Check angles 07:12:00 SkyScan query 07:12:01 SkyScan query done: ret=0 az=116.895<-7793 ze=66.495<-7567 Statuses=0009 0008 07:12:01 Msec=2250 True Az=116.895 Ze=66.495 Az status=0009 Ze status=0008 07:12:01 Check angles 07:12:01 SkyScan query 07:12:02 SkyScan query done: ret=0 az=134.4<-8960 ze=66.495<-7567 Statuses=0009 0008 07:12:02 Msec=3000 True Az=134.4 Ze=66.495 Az status=0009 Ze status=0008 07:12:02 Check angles 07:12:02 SkyScan query 07:12:02 SkyScan query done: ret=0 az=151.74<-10116 ze=66.495<-7567 Statuses=0009 0008 07:12:02 Msec=3750 True Az=151.74 Ze=66.495 Az status=0009 Ze status=0008 07:12:03 Check angles 07:12:03 SkyScan query 07:12:03 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:12:03 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:12:03 Message to Master queued w/err=0: serial=134853 error=0 07:12:08 Received message from Master: op=Filter serial=134854 07:12:08 Color wheel filter change from 0 to 0 07:12:08 FLIGetFilterPos err=0 currentPosition=0 07:12:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:08 Filter is already there-color wheel unchanged 07:12:08 Received message from Master: op=Shutter serial=134855 07:12:08 Shutter LASER close 07:12:08 Received message from Camera: op=State serial=134857 07:12:08 GetSingleValue result=40 Value=cccccccc 07:12:08 SkyScan query 07:12:09 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:12:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:09 Parameters OK 07:12:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:09 Set A/D data flow result=40 07:12:09 Set A/D channel type result=40 07:12:09 Set A/D encoding result=40 07:12:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:09 Set channel filter=0.000000e+000 result=40 07:12:09 Config A/D Result=40 07:12:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:09 Get A/D filter: -9.255963e+061 result=40 07:12:09 Get A/D value=-858993460 result=40 07:12:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:09 Parameters OK 07:12:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:09 Set A/D data flow result=40 07:12:09 Set A/D channel type result=40 07:12:09 Set A/D encoding result=40 07:12:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:09 Set channel filter=0.000000e+000 result=40 07:12:09 Config A/D Result=40 07:12:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:09 Get A/D filter: -9.255963e+061 result=40 07:12:09 Get A/D value=-858993460 result=40 07:12:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:09 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:09 Aux= 07:12:09 Message to Camera, serial 134857 queued 07:12:46 Received message from Master: op=PointingHead serial=134870 07:12:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:12:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:12:46 Point started: ret=0 07:12:46 point_skyscan result=0 07:12:47 Check angles 07:12:47 SkyScan query 07:12:47 SkyScan query done: ret=0 az=134.94<-8996 ze=36.825<-9545 Statuses=0009 0009 07:12:47 Msec=0 True Az=134.94 Ze=36.825 Az status=0009 Ze status=0009 07:12:48 Check angles 07:12:48 SkyScan query 07:12:48 SkyScan query done: ret=0 az=117.45<-7830 ze=15.885<-10941 Statuses=0009 0009 07:12:48 Msec=750 True Az=117.45 Ze=15.885 Az status=0009 Ze status=0009 07:12:48 Check angles 07:12:48 SkyScan query 07:12:49 SkyScan query done: ret=0 az=99.645<-6643 ze=-5.535<-12369 Statuses=0009 0009 07:12:49 Msec=1500 True Az=99.645 Ze=-5.535 Az status=0009 Ze status=0009 07:12:49 Check angles 07:12:49 SkyScan query 07:12:50 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.475<-13765 Statuses=0009 0009 07:12:50 Msec=2250 True Az=82.23 Ze=-26.475 Az status=0009 Ze status=0009 07:12:50 Check angles 07:12:50 SkyScan query 07:12:51 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.58<-14572 Statuses=0009 0008 07:12:51 Msec=3000 True Az=64.68 Ze=-38.58 Az status=0009 Ze status=0008 07:12:51 Check angles 07:12:51 SkyScan query 07:12:51 SkyScan query done: ret=0 az=47.28<-3152 ze=-38.52<-14568 Statuses=0009 0008 07:12:51 Msec=3750 True Az=47.28 Ze=-38.52 Az status=0009 Ze status=0008 07:12:51 Check angles 07:12:51 SkyScan query 07:12:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:12:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:12:52 Message to Master queued w/err=0: serial=134870 error=0 07:12:57 Received message from Master: op=Filter serial=134871 07:12:57 Color wheel filter change from 0 to 0 07:12:57 FLIGetFilterPos err=0 currentPosition=0 07:12:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:57 Filter is already there-color wheel unchanged 07:12:57 Received message from Master: op=Shutter serial=134872 07:12:57 Shutter LASER close 07:12:57 Received message from Camera: op=State serial=134874 07:12:57 GetSingleValue result=40 Value=cccccccc 07:12:57 SkyScan query 07:12:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:12:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:58 Parameters OK 07:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:58 Set A/D data flow result=40 07:12:58 Set A/D channel type result=40 07:12:58 Set A/D encoding result=40 07:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:58 Set channel filter=0.000000e+000 result=40 07:12:58 Config A/D Result=40 07:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:58 Get A/D filter: -9.255963e+061 result=40 07:12:58 Get A/D value=-858993460 result=40 07:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:58 Parameters OK 07:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:58 Set A/D data flow result=40 07:12:58 Set A/D channel type result=40 07:12:58 Set A/D encoding result=40 07:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:58 Set channel filter=0.000000e+000 result=40 07:12:58 Config A/D Result=40 07:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:58 Get A/D filter: -9.255963e+061 result=40 07:12:58 Get A/D value=-858993460 result=40 07:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:58 Aux= 07:12:58 Message to Camera, serial 134874 queued 07:13:35 Received message from Master: op=PointingHead serial=134887 07:13:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:13:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:13:35 Point started: ret=0 07:13:35 point_skyscan result=0 07:13:36 Check angles 07:13:36 SkyScan query 07:13:36 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.61<-16574 Statuses=0009 0009 07:13:36 Msec=0 True Az=64.2 Ze=-68.61 Az status=0009 Ze status=0009 07:13:37 Check angles 07:13:37 SkyScan query 07:13:37 SkyScan query done: ret=0 az=82.095<-5473 ze=-89.97<-17998 Statuses=0009 0009 07:13:37 Msec=750 True Az=82.095 Ze=-89.97 Az status=0009 Ze status=0009 07:13:37 Check angles 07:13:37 SkyScan query 07:13:38 SkyScan query done: ret=0 az=99.855<-6657 ze=-111.36<-19424 Statuses=0009 0009 07:13:38 Msec=1500 True Az=99.855 Ze=-111.36 Az status=0009 Ze status=0009 07:13:38 Check angles 07:13:38 SkyScan query 07:13:39 SkyScan query done: ret=0 az=117.345<-7823 ze=-132.3<-20820 Statuses=0009 0009 07:13:39 Msec=2250 True Az=117.345 Ze=-132.3 Az status=0009 Ze status=0009 07:13:39 Check angles 07:13:39 SkyScan query 07:13:39 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 07:13:39 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 07:13:40 Check angles 07:13:40 SkyScan query 07:13:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 07:13:40 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 07:13:40 Message to Master queued w/err=0: serial=134887 error=0 07:13:45 Received message from Master: op=Filter serial=134888 07:13:45 Color wheel filter change from 0 to 0 07:13:45 FLIGetFilterPos err=0 currentPosition=0 07:13:45 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:45 Filter is already there-color wheel unchanged 07:13:45 Received message from Master: op=Shutter serial=134889 07:13:45 Shutter LASER close 07:13:45 Received message from Camera: op=State serial=134891 07:13:45 GetSingleValue result=40 Value=cccccccc 07:13:45 SkyScan query 07:13:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:13:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:46 Parameters OK 07:13:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:46 Set A/D data flow result=40 07:13:46 Set A/D channel type result=40 07:13:46 Set A/D encoding result=40 07:13:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:46 Set channel filter=0.000000e+000 result=40 07:13:46 Config A/D Result=40 07:13:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:46 Get A/D filter: -9.255963e+061 result=40 07:13:46 Get A/D value=-858993460 result=40 07:13:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:46 Parameters OK 07:13:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:46 Set A/D data flow result=40 07:13:46 Set A/D channel type result=40 07:13:46 Set A/D encoding result=40 07:13:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:46 Set channel filter=0.000000e+000 result=40 07:13:46 Config A/D Result=40 07:13:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:46 Get A/D filter: -9.255963e+061 result=40 07:13:46 Get A/D value=-858993460 result=40 07:13:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:46 Aux= 07:13:46 Message to Camera, serial 134891 queued 07:14:23 Received message from Master: op=PointingHead serial=134904 07:14:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:14:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:14:24 Point started: ret=0 07:14:24 point_skyscan result=0 07:14:24 Check angles 07:14:24 SkyScan query 07:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.345<-23423 Statuses=0009 0009 07:14:25 Msec=0 True Az=112.995 Ze=-171.345 Az status=0009 Ze status=0009 07:14:25 Check angles 07:14:25 SkyScan query 07:14:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:14:26 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:14:26 Message to Master queued w/err=0: serial=134904 error=0 07:14:31 Received message from Master: op=Filter serial=134905 07:14:31 Color wheel filter change from 0 to 0 07:14:31 FLIGetFilterPos err=0 currentPosition=0 07:14:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:31 Filter is already there-color wheel unchanged 07:14:31 Received message from Master: op=Shutter serial=134906 07:14:31 Shutter LASER open 07:14:31 Received message from Camera: op=State serial=134908 07:14:31 GetSingleValue result=40 Value=cccccccc 07:14:31 SkyScan query 07:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:14:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:32 Parameters OK 07:14:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:32 Set A/D data flow result=40 07:14:32 Set A/D channel type result=40 07:14:32 Set A/D encoding result=40 07:14:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:32 Set channel filter=0.000000e+000 result=40 07:14:32 Config A/D Result=40 07:14:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:32 Get A/D filter: -9.255963e+061 result=40 07:14:32 Get A/D value=-858993460 result=40 07:14:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:32 Parameters OK 07:14:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:32 Set A/D data flow result=40 07:14:32 Set A/D channel type result=40 07:14:32 Set A/D encoding result=40 07:14:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:32 Set channel filter=0.000000e+000 result=40 07:14:32 Config A/D Result=40 07:14:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:32 Get A/D filter: -9.255963e+061 result=40 07:14:32 Get A/D value=-858993460 result=40 07:14:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:32 Aux= 07:14:32 Message to Camera, serial 134908 queued 07:14:40 Received message from Master: op=Shutter serial=134918 07:14:40 Shutter LASER close 07:14:41 Received message from Master: op=PointingHead serial=134922 07:14:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:14:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:14:41 Point started: ret=0 07:14:41 point_skyscan result=0 07:14:42 Check angles 07:14:42 SkyScan query 07:14:42 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.4<-21560 Statuses=0009 0009 07:14:42 Msec=0 True Az=135.81 Ze=-143.4 Az status=0009 Ze status=0009 07:14:43 Check angles 07:14:43 SkyScan query 07:14:43 SkyScan query done: ret=0 az=153.27<-10218 ze=-122.415<-20161 Statuses=0009 0009 07:14:43 Msec=750 True Az=153.27 Ze=-122.415 Az status=0009 Ze status=0009 07:14:43 Check angles 07:14:43 SkyScan query 07:14:44 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.01<-18734 Statuses=0009 0009 07:14:44 Msec=1500 True Az=171.24 Ze=-101.01 Az status=0009 Ze status=0009 07:14:44 Check angles 07:14:44 SkyScan query 07:14:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.1<-17340 Statuses=0008 0009 07:14:45 Msec=2250 True Az=176.01 Ze=-80.1 Az status=0008 Ze status=0009 07:14:45 Check angles 07:14:45 SkyScan query 07:14:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.635<-15909 Statuses=0008 0009 07:14:45 Msec=3000 True Az=176.01 Ze=-58.635 Az status=0008 Ze status=0009 07:14:46 Check angles 07:14:46 SkyScan query 07:14:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:14:46 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:14:46 Message to Master queued w/err=0: serial=134922 error=0 07:14:51 Received message from Master: op=Filter serial=134923 07:14:51 Color wheel filter change from 0 to 0 07:14:51 FLIGetFilterPos err=0 currentPosition=0 07:14:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:51 Filter is already there-color wheel unchanged 07:14:51 Received message from Master: op=Shutter serial=134924 07:14:51 Shutter LASER close 07:14:51 Received message from Camera: op=State serial=134926 07:14:51 GetSingleValue result=40 Value=cccccccc 07:14:51 SkyScan query 07:14:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:14:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:52 Parameters OK 07:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:52 Set A/D data flow result=40 07:14:52 Set A/D channel type result=40 07:14:52 Set A/D encoding result=40 07:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:52 Set channel filter=0.000000e+000 result=40 07:14:52 Config A/D Result=40 07:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:52 Get A/D filter: -9.255963e+061 result=40 07:14:52 Get A/D value=-858993460 result=40 07:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:52 Parameters OK 07:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:52 Set A/D data flow result=40 07:14:52 Set A/D channel type result=40 07:14:52 Set A/D encoding result=40 07:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:52 Set channel filter=0.000000e+000 result=40 07:14:52 Config A/D Result=40 07:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:52 Get A/D filter: -9.255963e+061 result=40 07:14:52 Get A/D value=-858993460 result=40 07:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:52 Aux= 07:14:52 Message to Camera, serial 134926 queued 07:15:27 Received message from Master: op=Identify serial=134934 07:15:28 Received message from Master: op=PointingHead serial=134941 07:15:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:15:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:15:28 Point started: ret=0 07:15:28 point_skyscan result=0 07:15:29 Check angles 07:15:29 SkyScan query 07:15:30 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.27<-13418 Statuses=0009 0009 07:15:30 Msec=0 True Az=152.655 Ze=-21.27 Az status=0009 Ze status=0009 07:15:30 Check angles 07:15:30 SkyScan query 07:15:30 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.345<-12023 Statuses=0009 0009 07:15:30 Msec=750 True Az=135.12 Ze=-0.345 Az status=0009 Ze status=0009 07:15:31 Check angles [UTC 2018-12-14 07:15:31] 07:15:31 SkyScan query 07:15:31 SkyScan query done: ret=0 az=116.115<-7741 ze=22.32<-10512 Statuses=0009 0009 07:15:31 Msec=1500 True Az=116.115 Ze=22.32 Az status=0009 Ze status=0009 07:15:31 Check angles 07:15:31 SkyScan query 07:15:32 SkyScan query done: ret=0 az=100.29<-6686 ze=41.58<-9228 Statuses=0009 0009 07:15:32 Msec=2250 True Az=100.29 Ze=41.58 Az status=0009 Ze status=0009 07:15:32 Check angles 07:15:32 SkyScan query 07:15:33 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 07:15:33 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 07:15:33 Check angles 07:15:33 SkyScan query 07:15:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:15:33 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:15:33 Message to Master queued w/err=0: serial=134941 error=0 07:15:38 Received message from Master: op=Filter serial=134942 07:15:38 Color wheel filter change from 0 to 0 07:15:38 FLIGetFilterPos err=0 currentPosition=0 07:15:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:38 Filter is already there-color wheel unchanged 07:15:39 Received message from Master: op=Shutter serial=134943 07:15:39 Shutter LASER close 07:15:39 Received message from Camera: op=State serial=134945 07:15:39 GetSingleValue result=40 Value=cccccccc 07:15:39 SkyScan query 07:15:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:15:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:39 Parameters OK 07:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:39 Set A/D data flow result=40 07:15:39 Set A/D channel type result=40 07:15:39 Set A/D encoding result=40 07:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:39 Set channel filter=0.000000e+000 result=40 07:15:39 Config A/D Result=40 07:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:39 Get A/D filter: -9.255963e+061 result=40 07:15:39 Get A/D value=-858993460 result=40 07:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:39 Parameters OK 07:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:39 Set A/D data flow result=40 07:15:39 Set A/D channel type result=40 07:15:39 Set A/D encoding result=40 07:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:39 Set channel filter=0.000000e+000 result=40 07:15:39 Config A/D Result=40 07:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:39 Get A/D filter: -9.255963e+061 result=40 07:15:39 Get A/D value=-858993460 result=40 07:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:39 Aux= 07:15:39 Message to Camera, serial 134945 queued [UTC 2018-12-14 07:15:52] 07:16:16 Received message from Master: op=PointingHead serial=134958 07:16:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:16:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:16:16 Point started: ret=0 07:16:16 point_skyscan result=0 07:16:17 Check angles 07:16:17 SkyScan query 07:16:18 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 07:16:18 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 07:16:18 Check angles 07:16:18 SkyScan query 07:16:18 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 07:16:18 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 07:16:19 Check angles 07:16:19 SkyScan query 07:16:19 SkyScan query done: ret=0 az=144.48<-9632 ze=38.505<-9433 Statuses=0009 0008 07:16:19 Msec=1500 True Az=144.48 Ze=38.505 Az status=0009 Ze status=0008 07:16:19 Check angles 07:16:19 SkyScan query 07:16:20 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 07:16:20 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 07:16:20 Check angles 07:16:20 SkyScan query 07:16:21 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:16:21 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:16:21 Check angles 07:16:21 SkyScan query 07:16:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:16:21 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:16:21 Message to Master queued w/err=0: serial=134958 error=0 07:16:26 Received message from Master: op=Filter serial=134959 07:16:26 Color wheel filter change from 0 to 0 07:16:26 FLIGetFilterPos err=0 currentPosition=0 07:16:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:26 Filter is already there-color wheel unchanged 07:16:27 Received message from Master: op=Shutter serial=134960 07:16:27 Shutter LASER close 07:16:27 Received message from Camera: op=State serial=134962 07:16:27 GetSingleValue result=40 Value=cccccccc 07:16:27 SkyScan query 07:16:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:16:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:27 Parameters OK 07:16:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:27 Set A/D data flow result=40 07:16:27 Set A/D channel type result=40 07:16:27 Set A/D encoding result=40 07:16:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:27 Set channel filter=0.000000e+000 result=40 07:16:27 Config A/D Result=40 07:16:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:27 Get A/D filter: -9.255963e+061 result=40 07:16:27 Get A/D value=-858993460 result=40 07:16:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:27 Parameters OK 07:16:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:27 Set A/D data flow result=40 07:16:27 Set A/D channel type result=40 07:16:27 Set A/D encoding result=40 07:16:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:27 Set channel filter=0.000000e+000 result=40 07:16:27 Config A/D Result=40 07:16:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:27 Get A/D filter: -9.255963e+061 result=40 07:16:27 Get A/D value=-858993460 result=40 07:16:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:27 Aux= 07:16:27 Message to Camera, serial 134962 queued 07:17:04 Received message from Master: op=PointingHead serial=134975 07:17:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:17:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:17:04 Point started: ret=0 07:17:04 point_skyscan result=0 07:17:05 Check angles 07:17:05 SkyScan query 07:17:06 SkyScan query done: ret=0 az=153.18<-10212 ze=8.85<-11410 Statuses=0009 0009 07:17:06 Msec=0 True Az=153.18 Ze=8.85 Az status=0009 Ze status=0009 07:17:06 Check angles 07:17:06 SkyScan query 07:17:07 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.555<-12837 Statuses=0009 0009 07:17:07 Msec=750 True Az=135.285 Ze=-12.555 Az status=0009 Ze status=0009 07:17:07 Check angles 07:17:07 SkyScan query 07:17:07 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.54<-14236 Statuses=0009 0009 07:17:07 Msec=1500 True Az=117.765 Ze=-33.54 Az status=0009 Ze status=0009 07:17:07 Check angles 07:17:07 SkyScan query 07:17:08 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.555<-15437 Statuses=0009 0009 07:17:08 Msec=2250 True Az=100.41 Ze=-51.555 Az status=0009 Ze status=0009 07:17:08 Check angles 07:17:08 SkyScan query 07:17:09 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 07:17:09 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 07:17:09 Check angles 07:17:09 SkyScan query 07:17:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:17:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:17:10 Message to Master queued w/err=0: serial=134975 error=0 07:17:15 Received message from Master: op=Filter serial=134976 07:17:15 Color wheel filter change from 0 to 0 07:17:15 FLIGetFilterPos err=0 currentPosition=0 07:17:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:15 Filter is already there-color wheel unchanged 07:17:15 Received message from Master: op=Shutter serial=134977 07:17:15 Shutter LASER close 07:17:15 Received message from Camera: op=State serial=134979 07:17:15 GetSingleValue result=40 Value=cccccccc 07:17:15 SkyScan query 07:17:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:17:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:15 Parameters OK 07:17:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:15 Set A/D data flow result=40 07:17:15 Set A/D channel type result=40 07:17:15 Set A/D encoding result=40 07:17:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:15 Set channel filter=0.000000e+000 result=40 07:17:15 Config A/D Result=40 07:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:15 Get A/D filter: -9.255963e+061 result=40 07:17:15 Get A/D value=-858993460 result=40 07:17:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:15 Parameters OK 07:17:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:15 Set A/D data flow result=40 07:17:15 Set A/D channel type result=40 07:17:15 Set A/D encoding result=40 07:17:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:15 Set channel filter=0.000000e+000 result=40 07:17:15 Config A/D Result=40 07:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:15 Get A/D filter: -9.255963e+061 result=40 07:17:15 Get A/D value=-858993460 result=40 07:17:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:15 Aux= 07:17:15 Message to Camera, serial 134979 queued 07:17:52 Received message from Master: op=PointingHead serial=134992 07:17:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:17:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:17:52 Point started: ret=0 07:17:52 point_skyscan result=0 07:17:53 Check angles 07:17:53 SkyScan query 07:17:54 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.36<-17424 Statuses=0009 0009 07:17:54 Msec=0 True Az=109.14 Ze=-81.36 Az status=0009 Ze status=0009 07:17:54 Check angles 07:17:54 SkyScan query 07:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 07:17:55 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 07:17:55 Check angles 07:17:55 SkyScan query 07:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.27<-20218 Statuses=0008 0009 07:17:55 Msec=1500 True Az=112.995 Ze=-123.27 Az status=0008 Ze status=0009 07:17:55 Check angles 07:17:55 SkyScan query 07:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.225<-21615 Statuses=0008 0009 07:17:56 Msec=2250 True Az=112.995 Ze=-144.225 Az status=0008 Ze status=0009 07:17:56 Check angles 07:17:56 SkyScan query 07:17:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.165<-23011 Statuses=0008 0009 07:17:57 Msec=3000 True Az=112.995 Ze=-165.165 Az status=0008 Ze status=0009 07:17:57 Check angles 07:17:57 SkyScan query 07:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:17:58 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:17:58 Message to Master queued w/err=0: serial=134992 error=0 07:18:03 Received message from Master: op=Filter serial=134993 07:18:03 Color wheel filter change from 0 to 0 07:18:03 FLIGetFilterPos err=0 currentPosition=0 07:18:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:03 Filter is already there-color wheel unchanged 07:18:03 Received message from Master: op=Shutter serial=134994 07:18:03 Shutter LASER open 07:18:03 Received message from Camera: op=State serial=134996 07:18:03 GetSingleValue result=40 Value=cccccccc 07:18:03 SkyScan query 07:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:18:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:03 Parameters OK 07:18:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:03 Set A/D data flow result=40 07:18:03 Set A/D channel type result=40 07:18:03 Set A/D encoding result=40 07:18:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:03 Set channel filter=0.000000e+000 result=40 07:18:03 Config A/D Result=40 07:18:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:03 Get A/D filter: -9.255963e+061 result=40 07:18:03 Get A/D value=-858993460 result=40 07:18:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:03 Parameters OK 07:18:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:03 Set A/D data flow result=40 07:18:03 Set A/D channel type result=40 07:18:03 Set A/D encoding result=40 07:18:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:03 Set channel filter=0.000000e+000 result=40 07:18:03 Config A/D Result=40 07:18:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:03 Get A/D filter: -9.255963e+061 result=40 07:18:03 Get A/D value=-858993460 result=40 07:18:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:03 Aux= 07:18:03 Message to Camera, serial 134996 queued 07:18:12 Received message from Master: op=Shutter serial=135006 07:18:12 Shutter LASER close 07:18:12 Received message from Master: op=PointingHead serial=135010 07:18:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:18:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:18:13 Point started: ret=0 07:18:13 point_skyscan result=0 07:18:13 Check angles 07:18:13 SkyScan query 07:18:14 SkyScan query done: ret=0 az=90.12<-6008 ze=157.545<-1497 Statuses=0009 0009 07:18:14 Msec=0 True Az=90.12 Ze=157.545 Az status=0009 Ze status=0009 07:18:14 Check angles 07:18:14 SkyScan query 07:18:15 SkyScan query done: ret=0 az=72.255<-4817 ze=136.14<-2924 Statuses=0009 0009 07:18:15 Msec=750 True Az=72.255 Ze=136.14 Az status=0009 Ze status=0009 07:18:15 Check angles 07:18:15 SkyScan query 07:18:16 SkyScan query done: ret=0 az=54.48<-3632 ze=114.705<-4353 Statuses=0009 0009 07:18:16 Msec=1500 True Az=54.48 Ze=114.705 Az status=0009 Ze status=0009 07:18:16 Check angles 07:18:16 SkyScan query 07:18:16 SkyScan query done: ret=0 az=40.98<-2732 ze=93.81<-5746 Statuses=0009 0009 07:18:16 Msec=2250 True Az=40.98 Ze=93.81 Az status=0009 Ze status=0009 07:18:17 Check angles 07:18:17 SkyScan query 07:18:17 SkyScan query done: ret=0 az=40.995<-2733 ze=72.795<-7147 Statuses=0008 0009 07:18:17 Msec=3000 True Az=40.995 Ze=72.795 Az status=0008 Ze status=0009 07:18:17 Check angles 07:18:17 SkyScan query 07:18:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.245<-8517 Statuses=0008 0009 07:18:18 Msec=3750 True Az=40.995 Ze=52.245 Az status=0008 Ze status=0009 07:18:18 Check angles 07:18:18 SkyScan query 07:18:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:18:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:18:19 Message to Master queued w/err=0: serial=135010 error=0 07:18:24 Received message from Master: op=Filter serial=135011 07:18:24 Color wheel filter change from 0 to 0 07:18:24 FLIGetFilterPos err=0 currentPosition=0 07:18:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:24 Filter is already there-color wheel unchanged 07:18:24 Received message from Master: op=Shutter serial=135012 07:18:24 Shutter LASER close 07:18:24 Received message from Camera: op=State serial=135014 07:18:24 GetSingleValue result=40 Value=cccccccc 07:18:24 SkyScan query 07:18:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:18:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:25 Parameters OK 07:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:25 Set A/D data flow result=40 07:18:25 Set A/D channel type result=40 07:18:25 Set A/D encoding result=40 07:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:25 Set channel filter=0.000000e+000 result=40 07:18:25 Config A/D Result=40 07:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:25 Get A/D filter: -9.255963e+061 result=40 07:18:25 Get A/D value=-858993460 result=40 07:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:25 Parameters OK 07:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:25 Set A/D data flow result=40 07:18:25 Set A/D channel type result=40 07:18:25 Set A/D encoding result=40 07:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:25 Set channel filter=0.000000e+000 result=40 07:18:25 Config A/D Result=40 07:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:25 Get A/D filter: -9.255963e+061 result=40 07:18:25 Get A/D value=-858993460 result=40 07:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:25 Aux= 07:18:25 Message to Camera, serial 135014 queued 07:19:01 Received message from Master: op=PointingHead serial=135027 07:19:01 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:19:01 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:19:02 Point started: ret=0 07:19:02 point_skyscan result=0 07:19:02 Check angles 07:19:02 SkyScan query 07:19:03 SkyScan query done: ret=0 az=63.93<-4262 ze=66.555<-7563 Statuses=0009 0008 07:19:03 Msec=0 True Az=63.93 Ze=66.555 Az status=0009 Ze status=0008 07:19:03 Check angles 07:19:03 SkyScan query 07:19:04 SkyScan query done: ret=0 az=81.45<-5430 ze=66.51<-7566 Statuses=0009 0008 07:19:04 Msec=750 True Az=81.45 Ze=66.51 Az status=0009 Ze status=0008 07:19:04 Check angles 07:19:04 SkyScan query 07:19:05 SkyScan query done: ret=0 az=98.88<-6592 ze=66.495<-7567 Statuses=0009 0008 07:19:05 Msec=1500 True Az=98.88 Ze=66.495 Az status=0009 Ze status=0008 07:19:05 Check angles 07:19:05 SkyScan query 07:19:05 SkyScan query done: ret=0 az=116.73<-7782 ze=66.495<-7567 Statuses=0009 0008 07:19:05 Msec=2250 True Az=116.73 Ze=66.495 Az status=0009 Ze status=0008 07:19:05 Check angles 07:19:05 SkyScan query 07:19:06 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 07:19:06 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 07:19:06 Check angles 07:19:06 SkyScan query 07:19:07 SkyScan query done: ret=0 az=152.055<-10137 ze=66.495<-7567 Statuses=0009 0008 07:19:07 Msec=3750 True Az=152.055 Ze=66.495 Az status=0009 Ze status=0008 07:19:07 Check angles 07:19:07 SkyScan query 07:19:08 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:19:08 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:19:08 Message to Master queued w/err=0: serial=135027 error=0 07:19:13 Received message from Master: op=Filter serial=135028 07:19:13 Color wheel filter change from 0 to 0 07:19:13 FLIGetFilterPos err=0 currentPosition=0 07:19:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:13 Filter is already there-color wheel unchanged 07:19:13 Received message from Master: op=Shutter serial=135029 07:19:13 Shutter LASER close 07:19:13 Received message from Camera: op=State serial=135031 07:19:13 GetSingleValue result=40 Value=cccccccc 07:19:13 SkyScan query 07:19:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:19:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:13 Parameters OK 07:19:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:13 Set A/D data flow result=40 07:19:13 Set A/D channel type result=40 07:19:13 Set A/D encoding result=40 07:19:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:13 Set channel filter=0.000000e+000 result=40 07:19:13 Config A/D Result=40 07:19:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:13 Get A/D filter: -9.255963e+061 result=40 07:19:13 Get A/D value=-858993460 result=40 07:19:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:13 Parameters OK 07:19:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:13 Set A/D data flow result=40 07:19:13 Set A/D channel type result=40 07:19:13 Set A/D encoding result=40 07:19:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:13 Set channel filter=0.000000e+000 result=40 07:19:13 Config A/D Result=40 07:19:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:13 Get A/D filter: -9.255963e+061 result=40 07:19:13 Get A/D value=-858993460 result=40 07:19:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:13 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:13 Aux= 07:19:13 Message to Camera, serial 135031 queued 07:19:50 Received message from Master: op=PointingHead serial=135044 07:19:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:19:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:19:51 Point started: ret=0 07:19:51 point_skyscan result=0 07:19:51 Check angles 07:19:51 SkyScan query 07:19:52 SkyScan query done: ret=0 az=134.955<-8997 ze=36.705<-9553 Statuses=0009 0009 07:19:52 Msec=0 True Az=134.955 Ze=36.705 Az status=0009 Ze status=0009 07:19:52 Check angles 07:19:52 SkyScan query 07:19:53 SkyScan query done: ret=0 az=117.525<-7835 ze=15.795<-10947 Statuses=0009 0009 07:19:53 Msec=750 True Az=117.525 Ze=15.795 Az status=0009 Ze status=0009 07:19:53 Check angles 07:19:53 SkyScan query 07:19:53 SkyScan query done: ret=0 az=100.17<-6678 ze=-5.19<-12346 Statuses=0009 0009 07:19:53 Msec=1500 True Az=100.17 Ze=-5.19 Az status=0009 Ze status=0009 07:19:54 Check angles 07:19:54 SkyScan query 07:19:54 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.595<-13773 Statuses=0009 0009 07:19:54 Msec=2250 True Az=82.2 Ze=-26.595 Az status=0009 Ze status=0009 07:19:54 Check angles 07:19:54 SkyScan query 07:19:55 SkyScan query done: ret=0 az=64.785<-4319 ze=-38.58<-14572 Statuses=0009 0008 07:19:55 Msec=3000 True Az=64.785 Ze=-38.58 Az status=0009 Ze status=0008 07:19:55 Check angles 07:19:55 SkyScan query 07:19:56 SkyScan query done: ret=0 az=47.25<-3150 ze=-38.52<-14568 Statuses=0009 0008 07:19:56 Msec=3750 True Az=47.25 Ze=-38.52 Az status=0009 Ze status=0008 07:19:56 Check angles 07:19:56 SkyScan query 07:19:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:19:56 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:19:56 Message to Master queued w/err=0: serial=135044 error=0 07:20:01 Received message from Master: op=Filter serial=135045 07:20:01 Color wheel filter change from 0 to 0 07:20:01 FLIGetFilterPos err=0 currentPosition=0 07:20:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:01 Filter is already there-color wheel unchanged 07:20:02 Received message from Master: op=Shutter serial=135046 07:20:02 Shutter LASER close 07:20:02 Received message from Camera: op=State serial=135048 07:20:02 GetSingleValue result=40 Value=cccccccc 07:20:02 SkyScan query 07:20:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:20:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:02 Parameters OK 07:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:02 Set A/D data flow result=40 07:20:02 Set A/D channel type result=40 07:20:02 Set A/D encoding result=40 07:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:02 Set channel filter=0.000000e+000 result=40 07:20:02 Config A/D Result=40 07:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:02 Get A/D filter: -9.255963e+061 result=40 07:20:02 Get A/D value=-858993460 result=40 07:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:02 Parameters OK 07:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:02 Set A/D data flow result=40 07:20:02 Set A/D channel type result=40 07:20:02 Set A/D encoding result=40 07:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:02 Set channel filter=0.000000e+000 result=40 07:20:02 Config A/D Result=40 07:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:02 Get A/D filter: -9.255963e+061 result=40 07:20:02 Get A/D value=-858993460 result=40 07:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:02 Aux= 07:20:02 Message to Camera, serial 135048 queued 07:20:38 Received message from Master: op=PointingHead serial=135060 07:20:38 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:20:38 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:20:38 Point started: ret=0 07:20:38 point_skyscan result=0 07:20:39 Check angles 07:20:39 SkyScan query 07:20:40 SkyScan query done: ret=0 az=64.35<-4290 ze=-68.715<-16581 Statuses=0009 0009 07:20:40 Msec=0 True Az=64.35 Ze=-68.715 Az status=0009 Ze status=0009 07:20:40 Check angles 07:20:40 SkyScan query 07:20:40 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.67<-17978 Statuses=0009 0009 07:20:40 Msec=750 True Az=81.78 Ze=-89.67 Az status=0009 Ze status=0009 07:20:41 Check angles 07:20:41 SkyScan query 07:20:41 SkyScan query done: ret=0 az=99.225<-6615 ze=-110.625<-19375 Statuses=0009 0009 07:20:41 Msec=1500 True Az=99.225 Ze=-110.625 Az status=0009 Ze status=0009 07:20:41 Check angles 07:20:41 SkyScan query 07:20:42 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.955<-20797 Statuses=0009 0009 07:20:42 Msec=2250 True Az=117.09 Ze=-131.955 Az status=0009 Ze status=0009 07:20:42 Check angles 07:20:42 SkyScan query 07:20:43 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 07:20:43 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 07:20:43 Check angles 07:20:43 SkyScan query 07:20:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 07:20:44 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 07:20:44 Message to Master queued w/err=0: serial=135060 error=0 07:20:49 Received message from Master: op=Filter serial=135061 07:20:49 Color wheel filter change from 0 to 0 07:20:49 FLIGetFilterPos err=0 currentPosition=0 07:20:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:49 Filter is already there-color wheel unchanged 07:20:49 Received message from Master: op=Shutter serial=135062 07:20:49 Shutter LASER close 07:20:49 Received message from Camera: op=State serial=135064 07:20:49 GetSingleValue result=40 Value=cccccccc 07:20:49 SkyScan query 07:20:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:20:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:49 Parameters OK 07:20:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:49 Set A/D data flow result=40 07:20:49 Set A/D channel type result=40 07:20:49 Set A/D encoding result=40 07:20:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:49 Set channel filter=0.000000e+000 result=40 07:20:49 Config A/D Result=40 07:20:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:49 Get A/D filter: -9.255963e+061 result=40 07:20:49 Get A/D value=-858993460 result=40 07:20:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:49 Parameters OK 07:20:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:49 Set A/D data flow result=40 07:20:49 Set A/D channel type result=40 07:20:49 Set A/D encoding result=40 07:20:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:49 Set channel filter=0.000000e+000 result=40 07:20:49 Config A/D Result=40 07:20:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:49 Get A/D filter: -9.255963e+061 result=40 07:20:49 Get A/D value=-858993460 result=40 07:20:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:49 Aux= 07:20:49 Message to Camera, serial 135064 queued 07:21:26 Received message from Master: op=PointingHead serial=135077 07:21:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:21:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:21:26 Point started: ret=0 07:21:26 point_skyscan result=0 07:21:27 Check angles 07:21:27 SkyScan query 07:21:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 07:21:28 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 07:21:28 Check angles 07:21:28 SkyScan query 07:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:21:29 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:21:29 Message to Master queued w/err=0: serial=135077 error=0 07:21:34 Received message from Master: op=Filter serial=135078 07:21:34 Color wheel filter change from 0 to 0 07:21:34 FLIGetFilterPos err=0 currentPosition=0 07:21:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:34 Filter is already there-color wheel unchanged 07:21:34 Received message from Master: op=Shutter serial=135079 07:21:34 Shutter LASER open 07:21:34 Received message from Camera: op=State serial=135081 07:21:34 GetSingleValue result=40 Value=cccccccc 07:21:34 SkyScan query 07:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:21:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:34 Parameters OK 07:21:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:34 Set A/D data flow result=40 07:21:34 Set A/D channel type result=40 07:21:34 Set A/D encoding result=40 07:21:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:34 Set channel filter=0.000000e+000 result=40 07:21:34 Config A/D Result=40 07:21:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:34 Get A/D filter: -9.255963e+061 result=40 07:21:34 Get A/D value=-858993460 result=40 07:21:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:34 Parameters OK 07:21:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:34 Set A/D data flow result=40 07:21:34 Set A/D channel type result=40 07:21:34 Set A/D encoding result=40 07:21:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:34 Set channel filter=0.000000e+000 result=40 07:21:34 Config A/D Result=40 07:21:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:34 Get A/D filter: -9.255963e+061 result=40 07:21:34 Get A/D value=-858993460 result=40 07:21:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:34 Aux= 07:21:34 Message to Camera, serial 135081 queued 07:21:43 Received message from Master: op=Shutter serial=135091 07:21:43 Shutter LASER close 07:21:43 Received message from Master: op=PointingHead serial=135095 07:21:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:21:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:21:44 Point started: ret=0 07:21:44 point_skyscan result=0 07:21:45 Check angles 07:21:45 SkyScan query 07:21:45 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.49<-21566 Statuses=0009 0009 07:21:45 Msec=0 True Az=135.825 Ze=-143.49 Az status=0009 Ze status=0009 07:21:45 Check angles 07:21:45 SkyScan query 07:21:46 SkyScan query done: ret=0 az=153.675<-10245 ze=-121.965<-20131 Statuses=0009 0009 07:21:46 Msec=750 True Az=153.675 Ze=-121.965 Az status=0009 Ze status=0009 07:21:46 Check angles 07:21:46 SkyScan query 07:21:47 SkyScan query done: ret=0 az=171.51<-11434 ze=-100.59<-18706 Statuses=0009 0009 07:21:47 Msec=1500 True Az=171.51 Ze=-100.59 Az status=0009 Ze status=0009 07:21:47 Check angles 07:21:47 SkyScan query 07:21:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.71<-17314 Statuses=0008 0009 07:21:47 Msec=2250 True Az=176.01 Ze=-79.71 Az status=0008 Ze status=0009 07:21:48 Check angles 07:21:48 SkyScan query 07:21:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.275<-15885 Statuses=0008 0009 07:21:48 Msec=3000 True Az=176.01 Ze=-58.275 Az status=0008 Ze status=0009 07:21:48 Check angles 07:21:48 SkyScan query 07:21:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:21:49 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:21:49 Message to Master queued w/err=0: serial=135095 error=0 07:21:54 Received message from Master: op=Filter serial=135096 07:21:54 Color wheel filter change from 0 to 0 07:21:54 FLIGetFilterPos err=0 currentPosition=0 07:21:54 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:54 Filter is already there-color wheel unchanged 07:21:54 Received message from Master: op=Shutter serial=135097 07:21:54 Shutter LASER close 07:21:54 Received message from Camera: op=State serial=135099 07:21:54 GetSingleValue result=40 Value=cccccccc 07:21:54 SkyScan query 07:21:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:21:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:55 Parameters OK 07:21:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:55 Set A/D data flow result=40 07:21:55 Set A/D channel type result=40 07:21:55 Set A/D encoding result=40 07:21:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:55 Set channel filter=0.000000e+000 result=40 07:21:55 Config A/D Result=40 07:21:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:55 Get A/D filter: -9.255963e+061 result=40 07:21:55 Get A/D value=-858993460 result=40 07:21:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:55 Parameters OK 07:21:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:55 Set A/D data flow result=40 07:21:55 Set A/D channel type result=40 07:21:55 Set A/D encoding result=40 07:21:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:55 Set channel filter=0.000000e+000 result=40 07:21:55 Config A/D Result=40 07:21:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:55 Get A/D filter: -9.255963e+061 result=40 07:21:55 Get A/D value=-858993460 result=40 07:21:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:55 Aux= 07:21:55 Message to Camera, serial 135099 queued 07:22:32 Received message from Master: op=PointingHead serial=135112 07:22:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:22:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:22:32 Point started: ret=0 07:22:32 point_skyscan result=0 07:22:33 Check angles 07:22:33 SkyScan query 07:22:33 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.795<-13453 Statuses=0009 0009 07:22:33 Msec=0 True Az=152.985 Ze=-21.795 Az status=0009 Ze status=0009 07:22:34 Check angles 07:22:34 SkyScan query 07:22:34 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.81<-12054 Statuses=0009 0009 07:22:34 Msec=750 True Az=135.585 Ze=-0.81 Az status=0009 Ze status=0009 07:22:34 Check angles 07:22:34 SkyScan query 07:22:35 SkyScan query done: ret=0 az=118.05<-7870 ze=20.13<-10658 Statuses=0009 0009 07:22:35 Msec=1500 True Az=118.05 Ze=20.13 Az status=0009 Ze status=0009 07:22:35 Check angles 07:22:35 SkyScan query 07:22:36 SkyScan query done: ret=0 az=100.65<-6710 ze=41.145<-9257 Statuses=0009 0009 07:22:36 Msec=2250 True Az=100.65 Ze=41.145 Az status=0009 Ze status=0009 07:22:36 Check angles 07:22:36 SkyScan query 07:22:36 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 07:22:36 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 07:22:37 Check angles 07:22:37 SkyScan query 07:22:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:22:37 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:22:37 Message to Master queued w/err=0: serial=135112 error=0 07:22:42 Received message from Master: op=Filter serial=135113 07:22:42 Color wheel filter change from 0 to 0 07:22:42 FLIGetFilterPos err=0 currentPosition=0 07:22:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:42 Filter is already there-color wheel unchanged 07:22:42 Received message from Master: op=Shutter serial=135114 07:22:42 Shutter LASER close 07:22:42 Received message from Camera: op=State serial=135116 07:22:42 GetSingleValue result=40 Value=cccccccc 07:22:42 SkyScan query 07:22:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:22:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:43 Parameters OK 07:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:43 Set A/D data flow result=40 07:22:43 Set A/D channel type result=40 07:22:43 Set A/D encoding result=40 07:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:43 Set channel filter=0.000000e+000 result=40 07:22:43 Config A/D Result=40 07:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:43 Get A/D filter: -9.255963e+061 result=40 07:22:43 Get A/D value=-858993460 result=40 07:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:43 Parameters OK 07:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:43 Set A/D data flow result=40 07:22:43 Set A/D channel type result=40 07:22:43 Set A/D encoding result=40 07:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:43 Set channel filter=0.000000e+000 result=40 07:22:43 Config A/D Result=40 07:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:43 Get A/D filter: -9.255963e+061 result=40 07:22:43 Get A/D value=-858993460 result=40 07:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:43 Aux= 07:22:43 Message to Camera, serial 135116 queued 07:23:20 Received message from Master: op=PointingHead serial=135129 07:23:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:23:20 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:23:20 Point started: ret=0 07:23:20 point_skyscan result=0 07:23:21 Check angles 07:23:21 SkyScan query 07:23:21 SkyScan query done: ret=0 az=109.095<-7273 ze=38.49<-9434 Statuses=0009 0008 07:23:21 Msec=0 True Az=109.095 Ze=38.49 Az status=0009 Ze status=0008 07:23:22 Check angles 07:23:22 SkyScan query 07:23:22 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 07:23:22 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 07:23:22 Check angles 07:23:22 SkyScan query 07:23:23 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 07:23:23 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 07:23:23 Check angles 07:23:23 SkyScan query 07:23:24 SkyScan query done: ret=0 az=161.895<-10793 ze=38.505<-9433 Statuses=0009 0008 07:23:24 Msec=2250 True Az=161.895 Ze=38.505 Az status=0009 Ze status=0008 07:23:24 Check angles 07:23:24 SkyScan query 07:23:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:23:24 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:23:25 Check angles 07:23:25 SkyScan query 07:23:25 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:23:25 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:23:25 Message to Master queued w/err=0: serial=135129 error=0 07:23:30 Received message from Master: op=Filter serial=135130 07:23:30 Color wheel filter change from 0 to 0 07:23:30 FLIGetFilterPos err=0 currentPosition=0 07:23:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:30 Filter is already there-color wheel unchanged 07:23:30 Received message from Master: op=Shutter serial=135131 07:23:30 Shutter LASER close 07:23:30 Received message from Camera: op=State serial=135133 07:23:30 GetSingleValue result=40 Value=cccccccc 07:23:30 SkyScan query 07:23:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:23:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:31 Parameters OK 07:23:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:31 Set A/D data flow result=40 07:23:31 Set A/D channel type result=40 07:23:31 Set A/D encoding result=40 07:23:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:31 Set channel filter=0.000000e+000 result=40 07:23:31 Config A/D Result=40 07:23:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:31 Get A/D filter: -9.255963e+061 result=40 07:23:31 Get A/D value=-858993460 result=40 07:23:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:31 Parameters OK 07:23:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:31 Set A/D data flow result=40 07:23:31 Set A/D channel type result=40 07:23:31 Set A/D encoding result=40 07:23:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:31 Set channel filter=0.000000e+000 result=40 07:23:31 Config A/D Result=40 07:23:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:31 Get A/D filter: -9.255963e+061 result=40 07:23:31 Get A/D value=-858993460 result=40 07:23:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:31 Aux= 07:23:31 Message to Camera, serial 135133 queued 07:24:08 Received message from Master: op=PointingHead serial=135146 07:24:08 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:24:08 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:24:08 Point started: ret=0 07:24:08 point_skyscan result=0 07:24:09 Check angles 07:24:09 SkyScan query 07:24:10 SkyScan query done: ret=0 az=152.97<-10198 ze=8.715<-11419 Statuses=0009 0009 07:24:10 Msec=0 True Az=152.97 Ze=8.715 Az status=0009 Ze status=0009 07:24:10 Check angles 07:24:10 SkyScan query 07:24:10 SkyScan query done: ret=0 az=135.555<-9037 ze=-12.255<-12817 Statuses=0009 0009 07:24:10 Msec=750 True Az=135.555 Ze=-12.255 Az status=0009 Ze status=0009 07:24:10 Check angles 07:24:10 SkyScan query 07:24:11 SkyScan query done: ret=0 az=118.035<-7869 ze=-33.18<-14212 Statuses=0009 0009 07:24:11 Msec=1500 True Az=118.035 Ze=-33.18 Az status=0009 Ze status=0009 07:24:11 Check angles 07:24:11 SkyScan query 07:24:12 SkyScan query done: ret=0 az=100.65<-6710 ze=-51.54<-15436 Statuses=0009 0009 07:24:12 Msec=2250 True Az=100.65 Ze=-51.54 Az status=0009 Ze status=0009 07:24:12 Check angles 07:24:12 SkyScan query 07:24:13 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:24:13 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:24:13 Check angles 07:24:13 SkyScan query 07:24:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:24:13 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:24:13 Message to Master queued w/err=0: serial=135146 error=0 07:24:18 Received message from Master: op=Filter serial=135147 07:24:18 Color wheel filter change from 0 to 0 07:24:18 FLIGetFilterPos err=0 currentPosition=0 07:24:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:18 Filter is already there-color wheel unchanged 07:24:18 Received message from Master: op=Shutter serial=135148 07:24:18 Shutter LASER close 07:24:18 Received message from Camera: op=State serial=135150 07:24:18 GetSingleValue result=40 Value=cccccccc 07:24:18 SkyScan query 07:24:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:24:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:19 Parameters OK 07:24:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:19 Set A/D data flow result=40 07:24:19 Set A/D channel type result=40 07:24:19 Set A/D encoding result=40 07:24:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:19 Set channel filter=0.000000e+000 result=40 07:24:19 Config A/D Result=40 07:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:19 Get A/D filter: -9.255963e+061 result=40 07:24:19 Get A/D value=-858993460 result=40 07:24:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:19 Parameters OK 07:24:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:19 Set A/D data flow result=40 07:24:19 Set A/D channel type result=40 07:24:19 Set A/D encoding result=40 07:24:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:19 Set channel filter=0.000000e+000 result=40 07:24:19 Config A/D Result=40 07:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:19 Get A/D filter: -9.255963e+061 result=40 07:24:19 Get A/D value=-858993460 result=40 07:24:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:19 Aux= 07:24:19 Message to Camera, serial 135150 queued 07:24:56 Received message from Master: op=PointingHead serial=135163 07:24:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:24:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:24:56 Point started: ret=0 07:24:56 point_skyscan result=0 07:24:57 Check angles 07:24:57 SkyScan query 07:24:58 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.405<-17427 Statuses=0009 0009 07:24:58 Msec=0 True Az=109.14 Ze=-81.405 Az status=0009 Ze status=0009 07:24:58 Check angles 07:24:58 SkyScan query 07:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.795<-18853 Statuses=0008 0009 07:24:58 Msec=750 True Az=112.995 Ze=-102.795 Az status=0008 Ze status=0009 07:24:59 Check angles 07:24:59 SkyScan query 07:24:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.155<-20277 Statuses=0008 0009 07:24:59 Msec=1500 True Az=112.995 Ze=-124.155 Az status=0008 Ze status=0009 07:24:59 Check angles 07:24:59 SkyScan query 07:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.11<-21674 Statuses=0008 0009 07:25:00 Msec=2250 True Az=112.995 Ze=-145.11 Az status=0008 Ze status=0009 07:25:00 Check angles 07:25:00 SkyScan query 07:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.545<-23103 Statuses=0008 0009 07:25:01 Msec=3000 True Az=112.995 Ze=-166.545 Az status=0008 Ze status=0009 07:25:01 Check angles 07:25:01 SkyScan query 07:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:25:01 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:25:01 Message to Master queued w/err=0: serial=135163 error=0 07:25:06 Received message from Master: op=Filter serial=135164 07:25:06 Color wheel filter change from 0 to 0 07:25:06 FLIGetFilterPos err=0 currentPosition=0 07:25:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:06 Filter is already there-color wheel unchanged 07:25:07 Received message from Master: op=Shutter serial=135165 07:25:07 Shutter LASER open 07:25:07 Received message from Camera: op=State serial=135167 07:25:07 GetSingleValue result=40 Value=cccccccc 07:25:07 SkyScan query 07:25:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:25:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:07 Parameters OK 07:25:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:07 Set A/D data flow result=40 07:25:07 Set A/D channel type result=40 07:25:07 Set A/D encoding result=40 07:25:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:07 Set channel filter=0.000000e+000 result=40 07:25:07 Config A/D Result=40 07:25:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:07 Get A/D filter: -9.255963e+061 result=40 07:25:07 Get A/D value=-858993460 result=40 07:25:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:07 Parameters OK 07:25:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:07 Set A/D data flow result=40 07:25:07 Set A/D channel type result=40 07:25:07 Set A/D encoding result=40 07:25:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:07 Set channel filter=0.000000e+000 result=40 07:25:07 Config A/D Result=40 07:25:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:07 Get A/D filter: -9.255963e+061 result=40 07:25:07 Get A/D value=-858993460 result=40 07:25:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:07 Aux= 07:25:07 Message to Camera, serial 135167 queued 07:25:16 Received message from Master: op=Shutter serial=135177 07:25:16 Shutter LASER close 07:25:16 Received message from Master: op=PointingHead serial=135181 07:25:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:25:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:25:17 Point started: ret=0 07:25:17 point_skyscan result=0 07:25:17 Check angles 07:25:17 SkyScan query 07:25:18 SkyScan query done: ret=0 az=90.12<-6008 ze=157.44<-1504 Statuses=0009 0009 07:25:18 Msec=0 True Az=90.12 Ze=157.44 Az status=0009 Ze status=0009 07:25:18 Check angles 07:25:18 SkyScan query 07:25:19 SkyScan query done: ret=0 az=72.615<-4841 ze=136.47<-2902 Statuses=0009 0009 07:25:19 Msec=750 True Az=72.615 Ze=136.47 Az status=0009 Ze status=0009 07:25:19 Check angles 07:25:19 SkyScan query 07:25:19 SkyScan query done: ret=0 az=55.215<-3681 ze=115.545<-4297 Statuses=0009 0009 07:25:19 Msec=1500 True Az=55.215 Ze=115.545 Az status=0009 Ze status=0009 07:25:20 Check angles 07:25:20 SkyScan query 07:25:20 SkyScan query done: ret=0 az=40.995<-2733 ze=94.545<-5697 Statuses=0009 0009 07:25:20 Msec=2250 True Az=40.995 Ze=94.545 Az status=0009 Ze status=0009 07:25:20 Check angles 07:25:20 SkyScan query 07:25:21 SkyScan query done: ret=0 az=40.995<-2733 ze=73.62<-7092 Statuses=0008 0009 07:25:21 Msec=3000 True Az=40.995 Ze=73.62 Az status=0008 Ze status=0009 07:25:21 Check angles 07:25:21 SkyScan query 07:25:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 07:25:22 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 07:25:22 Check angles 07:25:22 SkyScan query 07:25:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:25:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:25:22 Message to Master queued w/err=0: serial=135181 error=0 07:25:27 Received message from Master: op=Filter serial=135182 07:25:27 Color wheel filter change from 0 to 0 07:25:27 FLIGetFilterPos err=0 currentPosition=0 07:25:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:27 Filter is already there-color wheel unchanged 07:25:28 Received message from Master: op=Shutter serial=135183 07:25:28 Shutter LASER close 07:25:28 Received message from Camera: op=State serial=135185 07:25:28 GetSingleValue result=40 Value=cccccccc 07:25:28 SkyScan query 07:25:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:25:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:28 Parameters OK 07:25:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:28 Set A/D data flow result=40 07:25:28 Set A/D channel type result=40 07:25:28 Set A/D encoding result=40 07:25:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:28 Set channel filter=0.000000e+000 result=40 07:25:28 Config A/D Result=40 07:25:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:28 Get A/D filter: -9.255963e+061 result=40 07:25:28 Get A/D value=-858993460 result=40 07:25:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:28 Parameters OK 07:25:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:28 Set A/D data flow result=40 07:25:28 Set A/D channel type result=40 07:25:28 Set A/D encoding result=40 07:25:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:28 Set channel filter=0.000000e+000 result=40 07:25:28 Config A/D Result=40 07:25:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:28 Get A/D filter: -9.255963e+061 result=40 07:25:28 Get A/D value=-858993460 result=40 07:25:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:28 Aux= [UTC 2018-12-14 07:25:28] 07:25:28 Message to Camera, serial 135185 queued 07:26:05 Received message from Master: op=PointingHead serial=135198 07:26:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:26:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:26:06 Point started: ret=0 07:26:06 point_skyscan result=0 07:26:06 Check angles 07:26:06 SkyScan query 07:26:07 SkyScan query done: ret=0 az=64.185<-4279 ze=66.555<-7563 Statuses=0009 0008 07:26:07 Msec=0 True Az=64.185 Ze=66.555 Az status=0009 Ze status=0008 07:26:07 Check angles 07:26:07 SkyScan query 07:26:08 SkyScan query done: ret=0 az=81.615<-5441 ze=66.495<-7567 Statuses=0009 0008 07:26:08 Msec=750 True Az=81.615 Ze=66.495 Az status=0009 Ze status=0008 07:26:08 Check angles 07:26:08 SkyScan query 07:26:08 SkyScan query done: ret=0 az=99.075<-6605 ze=66.495<-7567 Statuses=0009 0008 07:26:08 Msec=1500 True Az=99.075 Ze=66.495 Az status=0009 Ze status=0008 07:26:09 Check angles 07:26:09 SkyScan query 07:26:09 SkyScan query done: ret=0 az=116.625<-7775 ze=66.495<-7567 Statuses=0009 0008 07:26:09 Msec=2250 True Az=116.625 Ze=66.495 Az status=0009 Ze status=0008 07:26:09 Check angles 07:26:09 SkyScan query 07:26:10 SkyScan query done: ret=0 az=134.025<-8935 ze=66.495<-7567 Statuses=0009 0008 07:26:10 Msec=3000 True Az=134.025 Ze=66.495 Az status=0009 Ze status=0008 07:26:10 Check angles 07:26:10 SkyScan query 07:26:11 SkyScan query done: ret=0 az=151.41<-10094 ze=66.495<-7567 Statuses=0009 0008 07:26:11 Msec=3750 True Az=151.41 Ze=66.495 Az status=0009 Ze status=0008 07:26:11 Check angles 07:26:11 SkyScan query 07:26:11 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:26:11 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:26:11 Message to Master queued w/err=0: serial=135198 error=0 07:26:16 Received message from Master: op=Filter serial=135199 07:26:16 Color wheel filter change from 0 to 0 07:26:16 FLIGetFilterPos err=0 currentPosition=0 07:26:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:16 Filter is already there-color wheel unchanged 07:26:17 Received message from Master: op=Shutter serial=135200 07:26:17 Shutter LASER close 07:26:17 Received message from Camera: op=State serial=135202 07:26:17 GetSingleValue result=40 Value=cccccccc 07:26:17 SkyScan query 07:26:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:26:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:17 Parameters OK 07:26:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:17 Set A/D data flow result=40 07:26:17 Set A/D channel type result=40 07:26:17 Set A/D encoding result=40 07:26:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:17 Set channel filter=0.000000e+000 result=40 07:26:17 Config A/D Result=40 07:26:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:17 Get A/D filter: -9.255963e+061 result=40 07:26:17 Get A/D value=-858993460 result=40 07:26:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:17 Parameters OK 07:26:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:17 Set A/D data flow result=40 07:26:17 Set A/D channel type result=40 07:26:17 Set A/D encoding result=40 07:26:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:17 Set channel filter=0.000000e+000 result=40 07:26:17 Config A/D Result=40 07:26:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:17 Get A/D filter: -9.255963e+061 result=40 07:26:17 Get A/D value=-858993460 result=40 07:26:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:17 Aux= 07:26:17 Message to Camera, serial 135202 queued 07:26:54 Received message from Master: op=PointingHead serial=135215 07:26:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:26:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:26:54 Point started: ret=0 07:26:54 point_skyscan result=0 07:26:55 Check angles 07:26:55 SkyScan query 07:26:56 SkyScan query done: ret=0 az=134.775<-8985 ze=36.585<-9561 Statuses=0009 0009 07:26:56 Msec=0 True Az=134.775 Ze=36.585 Az status=0009 Ze status=0009 07:26:56 Check angles 07:26:56 SkyScan query 07:26:56 SkyScan query done: ret=0 az=117.06<-7804 ze=15.18<-10988 Statuses=0009 0009 07:26:56 Msec=750 True Az=117.06 Ze=15.18 Az status=0009 Ze status=0009 07:26:57 Check angles 07:26:57 SkyScan query 07:26:57 SkyScan query done: ret=0 az=99.675<-6645 ze=-5.835<-12389 Statuses=0009 0009 07:26:57 Msec=1500 True Az=99.675 Ze=-5.835 Az status=0009 Ze status=0009 07:26:57 Check angles 07:26:57 SkyScan query 07:26:58 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.3<-13820 Statuses=0009 0009 07:26:58 Msec=2250 True Az=81.81 Ze=-27.3 Az status=0009 Ze status=0009 07:26:58 Check angles 07:26:58 SkyScan query 07:26:59 SkyScan query done: ret=0 az=64.215<-4281 ze=-38.58<-14572 Statuses=0009 0008 07:26:59 Msec=3000 True Az=64.215 Ze=-38.58 Az status=0009 Ze status=0008 07:26:59 Check angles 07:26:59 SkyScan query 07:26:59 SkyScan query done: ret=0 az=46.83<-3122 ze=-38.52<-14568 Statuses=0009 0008 07:26:59 Msec=3750 True Az=46.83 Ze=-38.52 Az status=0009 Ze status=0008 07:27:00 Check angles 07:27:00 SkyScan query 07:27:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:27:00 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:27:00 Message to Master queued w/err=0: serial=135215 error=0 07:27:05 Received message from Master: op=Filter serial=135216 07:27:05 Color wheel filter change from 0 to 0 07:27:05 FLIGetFilterPos err=0 currentPosition=0 07:27:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:05 Filter is already there-color wheel unchanged 07:27:05 Received message from Master: op=Shutter serial=135217 07:27:05 Shutter LASER close 07:27:05 Received message from Camera: op=State serial=135219 07:27:05 GetSingleValue result=40 Value=cccccccc 07:27:05 SkyScan query 07:27:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:27:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:06 Parameters OK 07:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:06 Set A/D data flow result=40 07:27:06 Set A/D channel type result=40 07:27:06 Set A/D encoding result=40 07:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:06 Set channel filter=0.000000e+000 result=40 07:27:06 Config A/D Result=40 07:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:06 Get A/D filter: -9.255963e+061 result=40 07:27:06 Get A/D value=-858993460 result=40 07:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:06 Parameters OK 07:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:06 Set A/D data flow result=40 07:27:06 Set A/D channel type result=40 07:27:06 Set A/D encoding result=40 07:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:06 Set channel filter=0.000000e+000 result=40 07:27:06 Config A/D Result=40 07:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:06 Get A/D filter: -9.255963e+061 result=40 07:27:06 Get A/D value=-858993460 result=40 07:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:06 Aux= 07:27:06 Message to Camera, serial 135219 queued 07:27:43 Received message from Master: op=PointingHead serial=135232 07:27:43 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:27:43 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:27:43 Point started: ret=0 07:27:43 point_skyscan result=0 07:27:44 Check angles 07:27:44 SkyScan query 07:27:44 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.16<-16544 Statuses=0009 0009 07:27:44 Msec=0 True Az=63.87 Ze=-68.16 Az status=0009 Ze status=0009 07:27:45 Check angles 07:27:45 SkyScan query 07:27:45 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.565<-17971 Statuses=0009 0009 07:27:45 Msec=750 True Az=81.735 Ze=-89.565 Az status=0009 Ze status=0009 07:27:45 Check angles 07:27:45 SkyScan query 07:27:46 SkyScan query done: ret=0 az=99.225<-6615 ze=-110.535<-19369 Statuses=0009 0009 07:27:46 Msec=1500 True Az=99.225 Ze=-110.535 Az status=0009 Ze status=0009 07:27:46 Check angles 07:27:46 SkyScan query 07:27:47 SkyScan query done: ret=0 az=116.655<-7777 ze=-131.43<-20762 Statuses=0009 0009 07:27:47 Msec=2250 True Az=116.655 Ze=-131.43 Az status=0009 Ze status=0009 07:27:47 Check angles 07:27:47 SkyScan query 07:27:48 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 07:27:48 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 07:27:48 Check angles 07:27:48 SkyScan query 07:27:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 07:27:48 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 07:27:48 Message to Master queued w/err=0: serial=135232 error=0 07:27:53 Received message from Master: op=Filter serial=135233 07:27:53 Color wheel filter change from 0 to 0 07:27:53 FLIGetFilterPos err=0 currentPosition=0 07:27:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:53 Filter is already there-color wheel unchanged 07:27:53 Received message from Master: op=Shutter serial=135234 07:27:53 Shutter LASER close 07:27:53 Received message from Camera: op=State serial=135236 07:27:53 GetSingleValue result=40 Value=cccccccc 07:27:53 SkyScan query 07:27:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:27:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:54 Parameters OK 07:27:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:54 Set A/D data flow result=40 07:27:54 Set A/D channel type result=40 07:27:54 Set A/D encoding result=40 07:27:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:54 Set channel filter=0.000000e+000 result=40 07:27:54 Config A/D Result=40 07:27:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:54 Get A/D filter: -9.255963e+061 result=40 07:27:54 Get A/D value=-858993460 result=40 07:27:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:54 Parameters OK 07:27:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:54 Set A/D data flow result=40 07:27:54 Set A/D channel type result=40 07:27:54 Set A/D encoding result=40 07:27:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:54 Set channel filter=0.000000e+000 result=40 07:27:54 Config A/D Result=40 07:27:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:54 Get A/D filter: -9.255963e+061 result=40 07:27:54 Get A/D value=-858993460 result=40 07:27:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:54 Aux= 07:27:54 Message to Camera, serial 135236 queued 07:28:31 Received message from Master: op=PointingHead serial=135249 07:28:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:28:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:28:31 Point started: ret=0 07:28:31 point_skyscan result=0 07:28:32 Check angles 07:28:32 SkyScan query 07:28:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 07:28:33 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 07:28:33 Check angles 07:28:33 SkyScan query 07:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:28:33 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:28:33 Message to Master queued w/err=0: serial=135249 error=0 07:28:38 Received message from Master: op=Filter serial=135250 07:28:38 Color wheel filter change from 0 to 0 07:28:38 FLIGetFilterPos err=0 currentPosition=0 07:28:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:38 Filter is already there-color wheel unchanged 07:28:39 Received message from Master: op=Shutter serial=135251 07:28:39 Shutter LASER open 07:28:39 Received message from Camera: op=State serial=135253 07:28:39 GetSingleValue result=40 Value=cccccccc 07:28:39 SkyScan query 07:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:28:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:39 Parameters OK 07:28:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:39 Set A/D data flow result=40 07:28:39 Set A/D channel type result=40 07:28:39 Set A/D encoding result=40 07:28:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:39 Set channel filter=0.000000e+000 result=40 07:28:39 Config A/D Result=40 07:28:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:39 Get A/D filter: -9.255963e+061 result=40 07:28:39 Get A/D value=-858993460 result=40 07:28:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:39 Parameters OK 07:28:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:39 Set A/D data flow result=40 07:28:39 Set A/D channel type result=40 07:28:39 Set A/D encoding result=40 07:28:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:39 Set channel filter=0.000000e+000 result=40 07:28:39 Config A/D Result=40 07:28:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:39 Get A/D filter: -9.255963e+061 result=40 07:28:39 Get A/D value=-858993460 result=40 07:28:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:39 Aux= 07:28:39 Message to Camera, serial 135253 queued 07:28:48 Received message from Master: op=Shutter serial=135263 07:28:48 Shutter LASER close 07:28:48 Received message from Master: op=PointingHead serial=135267 07:28:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:28:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:28:49 Point started: ret=0 07:28:49 point_skyscan result=0 07:28:49 Check angles 07:28:49 SkyScan query 07:28:50 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.28<-21552 Statuses=0009 0009 07:28:50 Msec=0 True Az=135.885 Ze=-143.28 Az status=0009 Ze status=0009 07:28:50 Check angles 07:28:50 SkyScan query 07:28:51 SkyScan query done: ret=0 az=153.735<-10249 ze=-121.905<-20127 Statuses=0009 0009 07:28:51 Msec=750 True Az=153.735 Ze=-121.905 Az status=0009 Ze status=0009 07:28:51 Check angles 07:28:51 SkyScan query 07:28:51 SkyScan query done: ret=0 az=171.645<-11443 ze=-100.425<-18695 Statuses=0009 0009 07:28:51 Msec=1500 True Az=171.645 Ze=-100.425 Az status=0009 Ze status=0009 07:28:52 Check angles 07:28:52 SkyScan query 07:28:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.065<-17271 Statuses=0008 0009 07:28:52 Msec=2250 True Az=176.01 Ze=-79.065 Az status=0008 Ze status=0009 07:28:52 Check angles 07:28:52 SkyScan query 07:28:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.14<-15876 Statuses=0008 0009 07:28:53 Msec=3000 True Az=176.01 Ze=-58.14 Az status=0008 Ze status=0009 07:28:53 Check angles 07:28:53 SkyScan query 07:28:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 07:28:54 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 07:28:54 Message to Master queued w/err=0: serial=135267 error=0 07:28:59 Received message from Master: op=Filter serial=135268 07:28:59 Color wheel filter change from 0 to 0 07:28:59 FLIGetFilterPos err=0 currentPosition=0 07:28:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:59 Filter is already there-color wheel unchanged 07:28:59 Received message from Master: op=Shutter serial=135269 07:28:59 Shutter LASER close 07:28:59 Received message from Camera: op=State serial=135271 07:28:59 GetSingleValue result=40 Value=cccccccc 07:28:59 SkyScan query 07:29:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:29:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:00 Parameters OK 07:29:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:00 Set A/D data flow result=40 07:29:00 Set A/D channel type result=40 07:29:00 Set A/D encoding result=40 07:29:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:00 Set channel filter=0.000000e+000 result=40 07:29:00 Config A/D Result=40 07:29:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:00 Get A/D filter: -9.255963e+061 result=40 07:29:00 Get A/D value=-858993460 result=40 07:29:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:00 Parameters OK 07:29:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:00 Set A/D data flow result=40 07:29:00 Set A/D channel type result=40 07:29:00 Set A/D encoding result=40 07:29:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:00 Set channel filter=0.000000e+000 result=40 07:29:00 Config A/D Result=40 07:29:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:00 Get A/D filter: -9.255963e+061 result=40 07:29:00 Get A/D value=-858993460 result=40 07:29:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:00 Aux= 07:29:00 Message to Camera, serial 135271 queued 07:29:36 Received message from Master: op=PointingHead serial=135283 07:29:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:29:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:29:36 Point started: ret=0 07:29:36 point_skyscan result=0 07:29:37 Check angles 07:29:37 SkyScan query 07:29:37 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.765<-13451 Statuses=0009 0009 07:29:37 Msec=0 True Az=152.955 Ze=-21.765 Az status=0009 Ze status=0009 07:29:37 Check angles 07:29:37 SkyScan query 07:29:38 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.81<-12054 Statuses=0009 0009 07:29:38 Msec=750 True Az=135.375 Ze=-0.81 Az status=0009 Ze status=0009 07:29:38 Check angles 07:29:38 SkyScan query 07:29:39 SkyScan query done: ret=0 az=117.945<-7863 ze=20.145<-10657 Statuses=0009 0009 07:29:39 Msec=1500 True Az=117.945 Ze=20.145 Az status=0009 Ze status=0009 07:29:39 Check angles 07:29:39 SkyScan query 07:29:40 SkyScan query done: ret=0 az=100.47<-6698 ze=41.13<-9258 Statuses=0009 0009 07:29:40 Msec=2250 True Az=100.47 Ze=41.13 Az status=0009 Ze status=0009 07:29:40 Check angles 07:29:40 SkyScan query 07:29:40 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 07:29:40 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 07:29:40 Check angles 07:29:40 SkyScan query 07:29:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:29:41 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:29:41 Message to Master queued w/err=0: serial=135283 error=0 07:29:46 Received message from Master: op=Filter serial=135284 07:29:46 Color wheel filter change from 0 to 0 07:29:46 FLIGetFilterPos err=0 currentPosition=0 07:29:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:46 Filter is already there-color wheel unchanged 07:29:46 Received message from Master: op=Shutter serial=135285 07:29:46 Shutter LASER close 07:29:46 Received message from Camera: op=State serial=135287 07:29:46 GetSingleValue result=40 Value=cccccccc 07:29:46 SkyScan query 07:29:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:29:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:47 Parameters OK 07:29:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:47 Set A/D data flow result=40 07:29:47 Set A/D channel type result=40 07:29:47 Set A/D encoding result=40 07:29:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:47 Set channel filter=0.000000e+000 result=40 07:29:47 Config A/D Result=40 07:29:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:47 Get A/D filter: -9.255963e+061 result=40 07:29:47 Get A/D value=-858993460 result=40 07:29:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:47 Parameters OK 07:29:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:47 Set A/D data flow result=40 07:29:47 Set A/D channel type result=40 07:29:47 Set A/D encoding result=40 07:29:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:47 Set channel filter=0.000000e+000 result=40 07:29:47 Config A/D Result=40 07:29:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:47 Get A/D filter: -9.255963e+061 result=40 07:29:47 Get A/D value=-858993460 result=40 07:29:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:47 Aux= 07:29:47 Message to Camera, serial 135287 queued 07:30:24 Received message from Master: op=PointingHead serial=135300 07:30:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:30:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:30:24 Point started: ret=0 07:30:24 point_skyscan result=0 07:30:25 Check angles 07:30:25 SkyScan query 07:30:25 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 07:30:25 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 07:30:25 Check angles 07:30:25 SkyScan query 07:30:26 SkyScan query done: ret=0 az=126.945<-8463 ze=38.505<-9433 Statuses=0009 0008 07:30:26 Msec=750 True Az=126.945 Ze=38.505 Az status=0009 Ze status=0008 07:30:26 Check angles 07:30:26 SkyScan query 07:30:27 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 07:30:27 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 07:30:27 Check angles 07:30:27 SkyScan query 07:30:28 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 07:30:28 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 07:30:28 Check angles 07:30:28 SkyScan query 07:30:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:30:28 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:30:29 Check angles 07:30:29 SkyScan query 07:30:29 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:30:29 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:30:29 Message to Master queued w/err=0: serial=135300 error=0 07:30:34 Received message from Master: op=Filter serial=135301 07:30:34 Color wheel filter change from 0 to 0 07:30:34 FLIGetFilterPos err=0 currentPosition=0 07:30:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:34 Filter is already there-color wheel unchanged 07:30:34 Received message from Master: op=Shutter serial=135302 07:30:34 Shutter LASER close 07:30:34 Received message from Camera: op=State serial=135304 07:30:34 GetSingleValue result=40 Value=cccccccc 07:30:34 SkyScan query 07:30:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:30:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:35 Parameters OK 07:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:35 Set A/D data flow result=40 07:30:35 Set A/D channel type result=40 07:30:35 Set A/D encoding result=40 07:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:35 Set channel filter=0.000000e+000 result=40 07:30:35 Config A/D Result=40 07:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:35 Get A/D filter: -9.255963e+061 result=40 07:30:35 Get A/D value=-858993460 result=40 07:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:35 Parameters OK 07:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:35 Set A/D data flow result=40 07:30:35 Set A/D channel type result=40 07:30:35 Set A/D encoding result=40 07:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:35 Set channel filter=0.000000e+000 result=40 07:30:35 Config A/D Result=40 07:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:35 Get A/D filter: -9.255963e+061 result=40 07:30:35 Get A/D value=-858993460 result=40 07:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:35 Aux= 07:30:35 Message to Camera, serial 135304 queued 07:31:12 Received message from Master: op=PointingHead serial=135317 07:31:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:31:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:31:12 Point started: ret=0 07:31:12 point_skyscan result=0 07:31:13 Check angles 07:31:13 SkyScan query 07:31:13 SkyScan query done: ret=0 az=153.345<-10223 ze=9.03<-11398 Statuses=0009 0009 07:31:13 Msec=0 True Az=153.345 Ze=9.03 Az status=0009 Ze status=0009 07:31:14 Check angles 07:31:14 SkyScan query 07:31:14 SkyScan query done: ret=0 az=135.87<-9058 ze=-11.985<-12799 Statuses=0009 0009 07:31:14 Msec=750 True Az=135.87 Ze=-11.985 Az status=0009 Ze status=0009 07:31:14 Check angles 07:31:14 SkyScan query 07:31:15 SkyScan query done: ret=0 az=118.29<-7886 ze=-32.865<-14191 Statuses=0009 0009 07:31:15 Msec=1500 True Az=118.29 Ze=-32.865 Az status=0009 Ze status=0009 07:31:15 Check angles 07:31:15 SkyScan query 07:31:16 SkyScan query done: ret=0 az=100.89<-6726 ze=-51.495<-15433 Statuses=0009 0009 07:31:16 Msec=2250 True Az=100.89 Ze=-51.495 Az status=0009 Ze status=0009 07:31:16 Check angles 07:31:16 SkyScan query 07:31:16 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:31:16 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:31:17 Check angles 07:31:17 SkyScan query 07:31:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:31:17 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:31:17 Message to Master queued w/err=0: serial=135317 error=0 07:31:22 Received message from Master: op=Filter serial=135318 07:31:22 Color wheel filter change from 0 to 0 07:31:22 FLIGetFilterPos err=0 currentPosition=0 07:31:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:22 Filter is already there-color wheel unchanged 07:31:22 Received message from Master: op=Shutter serial=135319 07:31:22 Shutter LASER close 07:31:22 Received message from Camera: op=State serial=135321 07:31:22 GetSingleValue result=40 Value=cccccccc 07:31:22 SkyScan query 07:31:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:31:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:23 Parameters OK 07:31:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:23 Set A/D data flow result=40 07:31:23 Set A/D channel type result=40 07:31:23 Set A/D encoding result=40 07:31:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:23 Set channel filter=0.000000e+000 result=40 07:31:23 Config A/D Result=40 07:31:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:23 Get A/D filter: -9.255963e+061 result=40 07:31:23 Get A/D value=-858993460 result=40 07:31:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:23 Parameters OK 07:31:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:23 Set A/D data flow result=40 07:31:23 Set A/D channel type result=40 07:31:23 Set A/D encoding result=40 07:31:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:23 Set channel filter=0.000000e+000 result=40 07:31:23 Config A/D Result=40 07:31:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:23 Get A/D filter: -9.255963e+061 result=40 07:31:23 Get A/D value=-858993460 result=40 07:31:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:23 Aux= 07:31:23 Message to Camera, serial 135321 queued 07:32:00 Received message from Master: op=PointingHead serial=135334 07:32:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:32:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:32:00 Point started: ret=0 07:32:00 point_skyscan result=0 07:32:01 Check angles 07:32:01 SkyScan query 07:32:01 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.255<-17417 Statuses=0009 0009 07:32:01 Msec=0 True Az=108.945 Ze=-81.255 Az status=0009 Ze status=0009 07:32:02 Check angles 07:32:02 SkyScan query 07:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.225<-18815 Statuses=0008 0009 07:32:02 Msec=750 True Az=112.995 Ze=-102.225 Az status=0008 Ze status=0009 07:32:02 Check angles 07:32:02 SkyScan query 07:32:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.285<-20219 Statuses=0008 0009 07:32:03 Msec=1500 True Az=112.995 Ze=-123.285 Az status=0008 Ze status=0009 07:32:03 Check angles 07:32:03 SkyScan query 07:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.135<-21609 Statuses=0008 0009 07:32:04 Msec=2250 True Az=112.995 Ze=-144.135 Az status=0008 Ze status=0009 07:32:04 Check angles 07:32:04 SkyScan query 07:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.075<-23005 Statuses=0008 0009 07:32:04 Msec=3000 True Az=112.995 Ze=-165.075 Az status=0008 Ze status=0009 07:32:05 Check angles 07:32:05 SkyScan query 07:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:32:05 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:32:05 Message to Master queued w/err=0: serial=135334 error=0 07:32:10 Received message from Master: op=Filter serial=135335 07:32:10 Color wheel filter change from 0 to 0 07:32:10 FLIGetFilterPos err=0 currentPosition=0 07:32:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:10 Filter is already there-color wheel unchanged 07:32:10 Received message from Master: op=Shutter serial=135336 07:32:10 Shutter LASER open 07:32:11 Received message from Camera: op=State serial=135338 07:32:11 GetSingleValue result=40 Value=cccccccc 07:32:11 SkyScan query 07:32:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:32:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:11 Parameters OK 07:32:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:11 Set A/D data flow result=40 07:32:11 Set A/D channel type result=40 07:32:11 Set A/D encoding result=40 07:32:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:11 Set channel filter=0.000000e+000 result=40 07:32:11 Config A/D Result=40 07:32:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:11 Get A/D filter: -9.255963e+061 result=40 07:32:11 Get A/D value=-858993460 result=40 07:32:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:11 Parameters OK 07:32:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:11 Set A/D data flow result=40 07:32:11 Set A/D channel type result=40 07:32:11 Set A/D encoding result=40 07:32:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:11 Set channel filter=0.000000e+000 result=40 07:32:11 Config A/D Result=40 07:32:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:11 Get A/D filter: -9.255963e+061 result=40 07:32:11 Get A/D value=-858993460 result=40 07:32:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:11 Aux= 07:32:11 Message to Camera, serial 135338 queued 07:32:20 Received message from Master: op=Shutter serial=135348 07:32:20 Shutter LASER close 07:32:20 Received message from Master: op=PointingHead serial=135352 07:32:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:32:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:32:20 Point started: ret=0 07:32:20 point_skyscan result=0 07:32:21 Check angles 07:32:21 SkyScan query 07:32:22 SkyScan query done: ret=0 az=89.61<-5974 ze=156.87<-1542 Statuses=0009 0009 07:32:22 Msec=0 True Az=89.61 Ze=156.87 Az status=0009 Ze status=0009 07:32:22 Check angles 07:32:22 SkyScan query 07:32:22 SkyScan query done: ret=0 az=72.015<-4801 ze=135.93<-2938 Statuses=0009 0009 07:32:22 Msec=750 True Az=72.015 Ze=135.93 Az status=0009 Ze status=0009 07:32:23 Check angles 07:32:23 SkyScan query 07:32:23 SkyScan query done: ret=0 az=54.36<-3624 ze=114.48<-4368 Statuses=0009 0009 07:32:23 Msec=1500 True Az=54.36 Ze=114.48 Az status=0009 Ze status=0009 07:32:23 Check angles 07:32:23 SkyScan query 07:32:24 SkyScan query done: ret=0 az=40.98<-2732 ze=93.48<-5768 Statuses=0009 0009 07:32:24 Msec=2250 True Az=40.98 Ze=93.48 Az status=0009 Ze status=0009 07:32:24 Check angles 07:32:24 SkyScan query 07:32:25 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 07:32:25 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 07:32:25 Check angles 07:32:25 SkyScan query 07:32:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.125<-8525 Statuses=0008 0009 07:32:25 Msec=3750 True Az=40.995 Ze=52.125 Az status=0008 Ze status=0009 07:32:26 Check angles 07:32:26 SkyScan query 07:32:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:32:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:32:26 Message to Master queued w/err=0: serial=135352 error=0 07:32:31 Received message from Master: op=Filter serial=135353 07:32:31 Color wheel filter change from 0 to 0 07:32:31 FLIGetFilterPos err=0 currentPosition=0 07:32:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:31 Filter is already there-color wheel unchanged 07:32:31 Received message from Master: op=Shutter serial=135354 07:32:31 Shutter LASER close 07:32:32 Received message from Camera: op=State serial=135356 07:32:32 GetSingleValue result=40 Value=cccccccc 07:32:32 SkyScan query 07:32:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:32:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:32 Parameters OK 07:32:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:32 Set A/D data flow result=40 07:32:32 Set A/D channel type result=40 07:32:32 Set A/D encoding result=40 07:32:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:32 Set channel filter=0.000000e+000 result=40 07:32:32 Config A/D Result=40 07:32:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:32 Get A/D filter: -9.255963e+061 result=40 07:32:32 Get A/D value=-858993460 result=40 07:32:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:32 Parameters OK 07:32:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:32 Set A/D data flow result=40 07:32:32 Set A/D channel type result=40 07:32:32 Set A/D encoding result=40 07:32:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:32 Set channel filter=0.000000e+000 result=40 07:32:32 Config A/D Result=40 07:32:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:32 Get A/D filter: -9.255963e+061 result=40 07:32:32 Get A/D value=-858993460 result=40 07:32:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:32 Aux= 07:32:32 Message to Camera, serial 135356 queued 07:33:09 Received message from Master: op=PointingHead serial=135369 07:33:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:33:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:33:09 Point started: ret=0 07:33:09 point_skyscan result=0 07:33:10 Check angles 07:33:10 SkyScan query 07:33:11 SkyScan query done: ret=0 az=63.96<-4264 ze=66.57<-7562 Statuses=0009 0008 07:33:11 Msec=0 True Az=63.96 Ze=66.57 Az status=0009 Ze status=0008 07:33:11 Check angles 07:33:11 SkyScan query 07:33:11 SkyScan query done: ret=0 az=81.81<-5454 ze=66.495<-7567 Statuses=0009 0008 07:33:11 Msec=750 True Az=81.81 Ze=66.495 Az status=0009 Ze status=0008 07:33:12 Check angles 07:33:12 SkyScan query 07:33:12 SkyScan query done: ret=0 az=99.255<-6617 ze=66.495<-7567 Statuses=0009 0008 07:33:12 Msec=1500 True Az=99.255 Ze=66.495 Az status=0009 Ze status=0008 07:33:12 Check angles 07:33:12 SkyScan query 07:33:13 SkyScan query done: ret=0 az=116.73<-7782 ze=66.495<-7567 Statuses=0009 0008 07:33:13 Msec=2250 True Az=116.73 Ze=66.495 Az status=0009 Ze status=0008 07:33:13 Check angles 07:33:13 SkyScan query 07:33:14 SkyScan query done: ret=0 az=134.295<-8953 ze=66.495<-7567 Statuses=0009 0008 07:33:14 Msec=3000 True Az=134.295 Ze=66.495 Az status=0009 Ze status=0008 07:33:14 Check angles 07:33:14 SkyScan query 07:33:14 SkyScan query done: ret=0 az=151.575<-10105 ze=66.495<-7567 Statuses=0009 0008 07:33:14 Msec=3750 True Az=151.575 Ze=66.495 Az status=0009 Ze status=0008 07:33:15 Check angles 07:33:15 SkyScan query 07:33:15 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:33:15 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:33:15 Message to Master queued w/err=0: serial=135369 error=0 07:33:20 Received message from Master: op=Filter serial=135370 07:33:20 Color wheel filter change from 0 to 0 07:33:20 FLIGetFilterPos err=0 currentPosition=0 07:33:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:20 Filter is already there-color wheel unchanged 07:33:20 Received message from Master: op=Shutter serial=135371 07:33:20 Shutter LASER close 07:33:20 Received message from Camera: op=State serial=135373 07:33:20 GetSingleValue result=40 Value=cccccccc 07:33:20 SkyScan query 07:33:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:33:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:21 Parameters OK 07:33:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:21 Set A/D data flow result=40 07:33:21 Set A/D channel type result=40 07:33:21 Set A/D encoding result=40 07:33:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:21 Set channel filter=0.000000e+000 result=40 07:33:21 Config A/D Result=40 07:33:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:21 Get A/D filter: -9.255963e+061 result=40 07:33:21 Get A/D value=-858993460 result=40 07:33:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:21 Parameters OK 07:33:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:21 Set A/D data flow result=40 07:33:21 Set A/D channel type result=40 07:33:21 Set A/D encoding result=40 07:33:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:21 Set channel filter=0.000000e+000 result=40 07:33:21 Config A/D Result=40 07:33:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:21 Get A/D filter: -9.255963e+061 result=40 07:33:21 Get A/D value=-858993460 result=40 07:33:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:21 Aux= 07:33:21 Message to Camera, serial 135373 queued 07:33:58 Received message from Master: op=PointingHead serial=135386 07:33:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:33:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:33:58 Point started: ret=0 07:33:58 point_skyscan result=0 07:33:59 Check angles 07:33:59 SkyScan query 07:33:59 SkyScan query done: ret=0 az=134.745<-8983 ze=36.465<-9569 Statuses=0009 0009 07:33:59 Msec=0 True Az=134.745 Ze=36.465 Az status=0009 Ze status=0009 07:34:00 Check angles 07:34:00 SkyScan query 07:34:00 SkyScan query done: ret=0 az=117.225<-7815 ze=15.57<-10962 Statuses=0009 0009 07:34:00 Msec=750 True Az=117.225 Ze=15.57 Az status=0009 Ze status=0009 07:34:00 Check angles 07:34:00 SkyScan query 07:34:01 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.55<-12370 Statuses=0009 0009 07:34:01 Msec=1500 True Az=99.9 Ze=-5.55 Az status=0009 Ze status=0009 07:34:01 Check angles 07:34:01 SkyScan query 07:34:02 SkyScan query done: ret=0 az=82.005<-5467 ze=-26.88<-13792 Statuses=0009 0009 07:34:02 Msec=2250 True Az=82.005 Ze=-26.88 Az status=0009 Ze status=0009 07:34:02 Check angles 07:34:02 SkyScan query 07:34:02 SkyScan query done: ret=0 az=64.515<-4301 ze=-38.58<-14572 Statuses=0009 0008 07:34:02 Msec=3000 True Az=64.515 Ze=-38.58 Az status=0009 Ze status=0008 07:34:03 Check angles 07:34:03 SkyScan query 07:34:03 SkyScan query done: ret=0 az=47.085<-3139 ze=-38.52<-14568 Statuses=0009 0008 07:34:03 Msec=3750 True Az=47.085 Ze=-38.52 Az status=0009 Ze status=0008 07:34:03 Check angles 07:34:03 SkyScan query 07:34:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:34:04 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:34:04 Message to Master queued w/err=0: serial=135386 error=0 07:34:09 Received message from Master: op=Filter serial=135387 07:34:09 Color wheel filter change from 0 to 0 07:34:09 FLIGetFilterPos err=0 currentPosition=0 07:34:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:09 Filter is already there-color wheel unchanged 07:34:09 Received message from Master: op=Shutter serial=135388 07:34:09 Shutter LASER close 07:34:09 Received message from Camera: op=State serial=135390 07:34:09 GetSingleValue result=40 Value=cccccccc 07:34:09 SkyScan query 07:34:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:34:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:10 Parameters OK 07:34:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:10 Set A/D data flow result=40 07:34:10 Set A/D channel type result=40 07:34:10 Set A/D encoding result=40 07:34:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:10 Set channel filter=0.000000e+000 result=40 07:34:10 Config A/D Result=40 07:34:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:10 Get A/D filter: -9.255963e+061 result=40 07:34:10 Get A/D value=-858993460 result=40 07:34:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:10 Parameters OK 07:34:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:10 Set A/D data flow result=40 07:34:10 Set A/D channel type result=40 07:34:10 Set A/D encoding result=40 07:34:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:10 Set channel filter=0.000000e+000 result=40 07:34:10 Config A/D Result=40 07:34:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:10 Get A/D filter: -9.255963e+061 result=40 07:34:10 Get A/D value=-858993460 result=40 07:34:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:10 Aux= 07:34:10 Message to Camera, serial 135390 queued 07:34:46 Received message from Master: op=PointingHead serial=135402 07:34:46 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:34:46 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:34:46 Point started: ret=0 07:34:46 point_skyscan result=0 07:34:47 Check angles 07:34:47 SkyScan query 07:34:47 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.325<-16555 Statuses=0009 0009 07:34:47 Msec=0 True Az=64.005 Ze=-68.325 Az status=0009 Ze status=0009 07:34:48 Check angles 07:34:48 SkyScan query 07:34:48 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.31<-17954 Statuses=0009 0009 07:34:48 Msec=750 True Az=81.585 Ze=-89.31 Az status=0009 Ze status=0009 07:34:48 Check angles 07:34:48 SkyScan query 07:34:49 SkyScan query done: ret=0 az=98.97<-6598 ze=-110.25<-19350 Statuses=0009 0009 07:34:49 Msec=1500 True Az=98.97 Ze=-110.25 Az status=0009 Ze status=0009 07:34:49 Check angles 07:34:49 SkyScan query 07:34:50 SkyScan query done: ret=0 az=116.58<-7772 ze=-131.22<-20748 Statuses=0009 0009 07:34:50 Msec=2250 True Az=116.58 Ze=-131.22 Az status=0009 Ze status=0009 07:34:50 Check angles 07:34:50 SkyScan query 07:34:50 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 07:34:50 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 07:34:51 Check angles 07:34:51 SkyScan query 07:34:51 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 07:34:51 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 07:34:51 Message to Master queued w/err=0: serial=135402 error=0 07:34:56 Received message from Master: op=Filter serial=135403 07:34:56 Color wheel filter change from 0 to 0 07:34:56 FLIGetFilterPos err=0 currentPosition=0 07:34:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:56 Filter is already there-color wheel unchanged 07:34:56 Received message from Master: op=Shutter serial=135404 07:34:56 Shutter LASER close 07:34:56 Received message from Camera: op=State serial=135406 07:34:56 GetSingleValue result=40 Value=cccccccc 07:34:56 SkyScan query 07:34:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:34:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:57 Parameters OK 07:34:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:57 Set A/D data flow result=40 07:34:57 Set A/D channel type result=40 07:34:57 Set A/D encoding result=40 07:34:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:57 Set channel filter=0.000000e+000 result=40 07:34:57 Config A/D Result=40 07:34:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:57 Get A/D filter: -9.255963e+061 result=40 07:34:57 Get A/D value=-858993460 result=40 07:34:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:57 Parameters OK 07:34:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:57 Set A/D data flow result=40 07:34:57 Set A/D channel type result=40 07:34:57 Set A/D encoding result=40 07:34:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:57 Set channel filter=0.000000e+000 result=40 07:34:57 Config A/D Result=40 07:34:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:57 Get A/D filter: -9.255963e+061 result=40 07:34:57 Get A/D value=-858993460 result=40 07:34:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:57 Aux= 07:34:57 Message to Camera, serial 135406 queued 07:35:34 Received message from Master: op=PointingHead serial=135419 07:35:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:35:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:35:34 Point started: ret=0 07:35:34 point_skyscan result=0 07:35:35 Check angles 07:35:35 SkyScan query 07:35:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 07:35:36 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 07:35:36 Check angles 07:35:36 SkyScan query 07:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:35:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:35:36 Message to Master queued w/err=0: serial=135419 error=0 07:35:41 Received message from Master: op=Filter serial=135420 07:35:41 Color wheel filter change from 0 to 0 07:35:41 FLIGetFilterPos err=0 currentPosition=0 07:35:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:41 Filter is already there-color wheel unchanged 07:35:41 Received message from Master: op=Shutter serial=135421 07:35:41 Shutter LASER open 07:35:42 Received message from Camera: op=State serial=135423 07:35:42 GetSingleValue result=40 Value=cccccccc 07:35:42 SkyScan query 07:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:35:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:42 Parameters OK 07:35:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:42 Set A/D data flow result=40 07:35:42 Set A/D channel type result=40 07:35:42 Set A/D encoding result=40 07:35:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:42 Set channel filter=0.000000e+000 result=40 07:35:42 Config A/D Result=40 07:35:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:42 Get A/D filter: -9.255963e+061 result=40 07:35:42 Get A/D value=-858993460 result=40 07:35:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:42 Parameters OK 07:35:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:42 Set A/D data flow result=40 07:35:42 Set A/D channel type result=40 07:35:42 Set A/D encoding result=40 07:35:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:42 Set channel filter=0.000000e+000 result=40 07:35:42 Config A/D Result=40 07:35:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:42 Get A/D filter: -9.255963e+061 result=40 07:35:42 Get A/D value=-858993460 result=40 07:35:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:42 Aux= 07:35:42 Message to Camera, serial 135423 queued 07:35:51 Received message from Master: op=Shutter serial=135433 07:35:51 Shutter LASER close 07:35:51 Received message from Master: op=PointingHead serial=135437 07:35:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:35:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:35:52 Point started: ret=0 07:35:52 point_skyscan result=0 07:35:52 Check angles 07:35:52 SkyScan query 07:35:53 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.875<-21525 Statuses=0009 0009 07:35:53 Msec=0 True Az=136.38 Ze=-142.875 Az status=0009 Ze status=0009 [UTC 2018-12-14 07:35:53] 07:35:53 Check angles 07:35:53 SkyScan query 07:35:54 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.89<-20126 Statuses=0009 0009 07:35:54 Msec=750 True Az=153.75 Ze=-121.89 Az status=0009 Ze status=0009 07:35:54 Check angles 07:35:54 SkyScan query 07:35:54 SkyScan query done: ret=0 az=171.285<-11419 ze=-100.92<-18728 Statuses=0009 0009 07:35:54 Msec=1500 True Az=171.285 Ze=-100.92 Az status=0009 Ze status=0009 07:35:55 Check angles 07:35:55 SkyScan query 07:35:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.04<-17336 Statuses=0008 0009 07:35:55 Msec=2250 True Az=176.01 Ze=-80.04 Az status=0008 Ze status=0009 07:35:55 Check angles 07:35:55 SkyScan query 07:35:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.025<-15935 Statuses=0008 0009 07:35:56 Msec=3000 True Az=176.01 Ze=-59.025 Az status=0008 Ze status=0009 07:35:56 Check angles 07:35:56 SkyScan query 07:35:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:35:57 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:35:57 Message to Master queued w/err=0: serial=135437 error=0 07:36:02 Received message from Master: op=Filter serial=135438 07:36:02 Color wheel filter change from 0 to 0 07:36:02 FLIGetFilterPos err=0 currentPosition=0 07:36:02 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:02 Filter is already there-color wheel unchanged 07:36:02 Received message from Master: op=Shutter serial=135439 07:36:02 Shutter LASER close 07:36:02 Received message from Camera: op=State serial=135441 07:36:02 GetSingleValue result=40 Value=cccccccc 07:36:02 SkyScan query 07:36:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:36:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:03 Parameters OK 07:36:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:03 Set A/D data flow result=40 07:36:03 Set A/D channel type result=40 07:36:03 Set A/D encoding result=40 07:36:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:03 Set channel filter=0.000000e+000 result=40 07:36:03 Config A/D Result=40 07:36:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:03 Get A/D filter: -9.255963e+061 result=40 07:36:03 Get A/D value=-858993460 result=40 07:36:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:03 Parameters OK 07:36:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:03 Set A/D data flow result=40 07:36:03 Set A/D channel type result=40 07:36:03 Set A/D encoding result=40 07:36:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:03 Set channel filter=0.000000e+000 result=40 07:36:03 Config A/D Result=40 07:36:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:03 Get A/D filter: -9.255963e+061 result=40 07:36:03 Get A/D value=-858993460 result=40 07:36:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:03 Aux= 07:36:03 Message to Camera, serial 135441 queued 07:36:39 Received message from Master: op=PointingHead serial=135454 07:36:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:36:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:36:40 Point started: ret=0 07:36:40 point_skyscan result=0 07:36:40 Check angles 07:36:40 SkyScan query 07:36:41 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.18<-13412 Statuses=0009 0009 07:36:41 Msec=0 True Az=152.655 Ze=-21.18 Az status=0009 Ze status=0009 07:36:41 Check angles 07:36:41 SkyScan query 07:36:42 SkyScan query done: ret=0 az=135.06<-9004 ze=-0.255<-12017 Statuses=0009 0009 07:36:42 Msec=750 True Az=135.06 Ze=-0.255 Az status=0009 Ze status=0009 07:36:42 Check angles 07:36:42 SkyScan query 07:36:43 SkyScan query done: ret=0 az=117.6<-7840 ze=20.715<-10619 Statuses=0009 0009 07:36:43 Msec=1500 True Az=117.6 Ze=20.715 Az status=0009 Ze status=0009 07:36:43 Check angles 07:36:43 SkyScan query 07:36:43 SkyScan query done: ret=0 az=100.215<-6681 ze=41.655<-9223 Statuses=0009 0009 07:36:43 Msec=2250 True Az=100.215 Ze=41.655 Az status=0009 Ze status=0009 07:36:43 Check angles 07:36:43 SkyScan query 07:36:44 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 07:36:44 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 07:36:44 Check angles 07:36:44 SkyScan query 07:36:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:36:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:36:45 Message to Master queued w/err=0: serial=135454 error=0 07:36:50 Received message from Master: op=Filter serial=135455 07:36:50 Color wheel filter change from 0 to 0 07:36:50 FLIGetFilterPos err=0 currentPosition=0 07:36:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:50 Filter is already there-color wheel unchanged 07:36:50 Received message from Master: op=Shutter serial=135456 07:36:50 Shutter LASER close 07:36:50 Received message from Camera: op=State serial=135458 07:36:50 GetSingleValue result=40 Value=cccccccc 07:36:50 SkyScan query 07:36:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:36:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:51 Parameters OK 07:36:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:51 Set A/D data flow result=40 07:36:51 Set A/D channel type result=40 07:36:51 Set A/D encoding result=40 07:36:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:51 Set channel filter=0.000000e+000 result=40 07:36:51 Config A/D Result=40 07:36:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:51 Get A/D filter: -9.255963e+061 result=40 07:36:51 Get A/D value=-858993460 result=40 07:36:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:51 Parameters OK 07:36:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:51 Set A/D data flow result=40 07:36:51 Set A/D channel type result=40 07:36:51 Set A/D encoding result=40 07:36:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:51 Set channel filter=0.000000e+000 result=40 07:36:51 Config A/D Result=40 07:36:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:51 Get A/D filter: -9.255963e+061 result=40 07:36:51 Get A/D value=-858993460 result=40 07:36:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:51 Aux= 07:36:51 Message to Camera, serial 135458 queued 07:37:27 Received message from Master: op=PointingHead serial=135471 07:37:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:37:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:37:28 Point started: ret=0 07:37:28 point_skyscan result=0 07:37:29 Check angles 07:37:29 SkyScan query 07:37:29 SkyScan query done: ret=0 az=109.305<-7287 ze=38.49<-9434 Statuses=0009 0008 07:37:29 Msec=0 True Az=109.305 Ze=38.49 Az status=0009 Ze status=0008 07:37:29 Check angles 07:37:29 SkyScan query 07:37:30 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 07:37:30 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 07:37:30 Check angles 07:37:30 SkyScan query 07:37:31 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 07:37:31 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 07:37:31 Check angles 07:37:31 SkyScan query 07:37:31 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 07:37:31 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 07:37:32 Check angles 07:37:32 SkyScan query 07:37:32 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:37:32 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:37:32 Check angles 07:37:32 SkyScan query 07:37:33 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:37:33 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:37:33 Message to Master queued w/err=0: serial=135471 error=0 07:37:38 Received message from Master: op=Filter serial=135472 07:37:38 Color wheel filter change from 0 to 0 07:37:38 FLIGetFilterPos err=0 currentPosition=0 07:37:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:38 Filter is already there-color wheel unchanged 07:37:38 Received message from Master: op=Shutter serial=135473 07:37:38 Shutter LASER close 07:37:38 Received message from Camera: op=State serial=135475 07:37:38 GetSingleValue result=40 Value=cccccccc 07:37:38 SkyScan query 07:37:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:37:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:39 Parameters OK 07:37:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:39 Set A/D data flow result=40 07:37:39 Set A/D channel type result=40 07:37:39 Set A/D encoding result=40 07:37:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:39 Set channel filter=0.000000e+000 result=40 07:37:39 Config A/D Result=40 07:37:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:39 Get A/D filter: -9.255963e+061 result=40 07:37:39 Get A/D value=-858993460 result=40 07:37:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:39 Parameters OK 07:37:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:39 Set A/D data flow result=40 07:37:39 Set A/D channel type result=40 07:37:39 Set A/D encoding result=40 07:37:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:39 Set channel filter=0.000000e+000 result=40 07:37:39 Config A/D Result=40 07:37:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:39 Get A/D filter: -9.255963e+061 result=40 07:37:39 Get A/D value=-858993460 result=40 07:37:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:39 Aux= 07:37:39 Message to Camera, serial 135475 queued 07:38:16 Received message from Master: op=PointingHead serial=135488 07:38:16 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:38:16 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:38:16 Point started: ret=0 07:38:16 point_skyscan result=0 07:38:17 Check angles 07:38:17 SkyScan query 07:38:17 SkyScan query done: ret=0 az=153.21<-10214 ze=8.91<-11406 Statuses=0009 0009 07:38:17 Msec=0 True Az=153.21 Ze=8.91 Az status=0009 Ze status=0009 07:38:17 Check angles 07:38:17 SkyScan query 07:38:18 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.465<-12831 Statuses=0009 0009 07:38:18 Msec=750 True Az=135.36 Ze=-12.465 Az status=0009 Ze status=0009 07:38:18 Check angles 07:38:18 SkyScan query 07:38:19 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.405<-14227 Statuses=0009 0009 07:38:19 Msec=1500 True Az=117.765 Ze=-33.405 Az status=0009 Ze status=0009 07:38:19 Check angles 07:38:19 SkyScan query 07:38:19 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.555<-15437 Statuses=0009 0009 07:38:19 Msec=2250 True Az=100.425 Ze=-51.555 Az status=0009 Ze status=0009 07:38:20 Check angles 07:38:20 SkyScan query 07:38:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 07:38:20 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 07:38:20 Check angles 07:38:20 SkyScan query 07:38:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:38:21 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:38:21 Message to Master queued w/err=0: serial=135488 error=0 07:38:26 Received message from Master: op=Filter serial=135489 07:38:26 Color wheel filter change from 0 to 0 07:38:26 FLIGetFilterPos err=0 currentPosition=0 07:38:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:26 Filter is already there-color wheel unchanged 07:38:26 Received message from Master: op=Shutter serial=135490 07:38:26 Shutter LASER close 07:38:26 Received message from Camera: op=State serial=135492 07:38:26 GetSingleValue result=40 Value=cccccccc 07:38:26 SkyScan query 07:38:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:38:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:27 Parameters OK 07:38:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:27 Set A/D data flow result=40 07:38:27 Set A/D channel type result=40 07:38:27 Set A/D encoding result=40 07:38:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:27 Set channel filter=0.000000e+000 result=40 07:38:27 Config A/D Result=40 07:38:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:27 Get A/D filter: -9.255963e+061 result=40 07:38:27 Get A/D value=-858993460 result=40 07:38:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:27 Parameters OK 07:38:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:27 Set A/D data flow result=40 07:38:27 Set A/D channel type result=40 07:38:27 Set A/D encoding result=40 07:38:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:27 Set channel filter=0.000000e+000 result=40 07:38:27 Config A/D Result=40 07:38:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:27 Get A/D filter: -9.255963e+061 result=40 07:38:27 Get A/D value=-858993460 result=40 07:38:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:27 Aux= 07:38:27 Message to Camera, serial 135492 queued 07:39:04 Received message from Master: op=PointingHead serial=135505 07:39:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:39:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:39:04 Point started: ret=0 07:39:04 point_skyscan result=0 07:39:05 Check angles 07:39:05 SkyScan query 07:39:05 SkyScan query done: ret=0 az=109.47<-7298 ze=-81.87<-17458 Statuses=0009 0009 07:39:05 Msec=0 True Az=109.47 Ze=-81.87 Az status=0009 Ze status=0009 07:39:06 Check angles 07:39:06 SkyScan query 07:39:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.795<-18853 Statuses=0008 0009 07:39:06 Msec=750 True Az=112.995 Ze=-102.795 Az status=0008 Ze status=0009 07:39:06 Check angles 07:39:06 SkyScan query 07:39:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.765<-20251 Statuses=0008 0009 07:39:07 Msec=1500 True Az=112.995 Ze=-123.765 Az status=0008 Ze status=0009 07:39:07 Check angles 07:39:07 SkyScan query 07:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 07:39:08 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 07:39:08 Check angles 07:39:08 SkyScan query 07:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 07:39:08 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 07:39:09 Check angles 07:39:09 SkyScan query 07:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:39:09 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:39:09 Message to Master queued w/err=0: serial=135505 error=0 07:39:14 Received message from Master: op=Filter serial=135506 07:39:14 Color wheel filter change from 0 to 0 07:39:14 FLIGetFilterPos err=0 currentPosition=0 07:39:14 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:14 Filter is already there-color wheel unchanged 07:39:14 Received message from Master: op=Shutter serial=135507 07:39:14 Shutter LASER open 07:39:14 Received message from Camera: op=State serial=135509 07:39:14 GetSingleValue result=40 Value=cccccccc 07:39:14 SkyScan query 07:39:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:39:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:15 Parameters OK 07:39:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:15 Set A/D data flow result=40 07:39:15 Set A/D channel type result=40 07:39:15 Set A/D encoding result=40 07:39:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:15 Set channel filter=0.000000e+000 result=40 07:39:15 Config A/D Result=40 07:39:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:15 Get A/D filter: -9.255963e+061 result=40 07:39:15 Get A/D value=-858993460 result=40 07:39:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:15 Parameters OK 07:39:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:15 Set A/D data flow result=40 07:39:15 Set A/D channel type result=40 07:39:15 Set A/D encoding result=40 07:39:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:15 Set channel filter=0.000000e+000 result=40 07:39:15 Config A/D Result=40 07:39:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:15 Get A/D filter: -9.255963e+061 result=40 07:39:15 Get A/D value=-858993460 result=40 07:39:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:15 Aux= 07:39:15 Message to Camera, serial 135509 queued 07:39:23 Received message from Master: op=Shutter serial=135519 07:39:23 Shutter LASER close 07:39:24 Received message from Master: op=PointingHead serial=135523 07:39:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:39:24 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:39:24 Point started: ret=0 07:39:24 point_skyscan result=0 07:39:25 Check angles 07:39:25 SkyScan query 07:39:26 SkyScan query done: ret=0 az=89.61<-5974 ze=156.99<-1534 Statuses=0009 0009 07:39:26 Msec=0 True Az=89.61 Ze=156.99 Az status=0009 Ze status=0009 07:39:26 Check angles 07:39:26 SkyScan query 07:39:26 SkyScan query done: ret=0 az=71.835<-4789 ze=135.63<-2958 Statuses=0009 0009 07:39:26 Msec=750 True Az=71.835 Ze=135.63 Az status=0009 Ze status=0009 07:39:27 Check angles 07:39:27 SkyScan query 07:39:27 SkyScan query done: ret=0 az=54.465<-3631 ze=114.6<-4360 Statuses=0009 0009 07:39:27 Msec=1500 True Az=54.465 Ze=114.6 Az status=0009 Ze status=0009 07:39:27 Check angles 07:39:27 SkyScan query 07:39:28 SkyScan query done: ret=0 az=40.98<-2732 ze=93.69<-5754 Statuses=0009 0009 07:39:28 Msec=2250 True Az=40.98 Ze=93.69 Az status=0009 Ze status=0009 07:39:28 Check angles 07:39:28 SkyScan query 07:39:29 SkyScan query done: ret=0 az=40.995<-2733 ze=72.705<-7153 Statuses=0008 0009 07:39:29 Msec=3000 True Az=40.995 Ze=72.705 Az status=0008 Ze status=0009 07:39:29 Check angles 07:39:29 SkyScan query 07:39:29 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 07:39:29 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 07:39:30 Check angles 07:39:30 SkyScan query 07:39:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:39:30 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:39:30 Message to Master queued w/err=0: serial=135523 error=0 07:39:35 Received message from Master: op=Filter serial=135524 07:39:35 Color wheel filter change from 0 to 0 07:39:35 FLIGetFilterPos err=0 currentPosition=0 07:39:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:35 Filter is already there-color wheel unchanged 07:39:35 Received message from Master: op=Shutter serial=135525 07:39:35 Shutter LASER close 07:39:35 Received message from Camera: op=State serial=135527 07:39:35 GetSingleValue result=40 Value=cccccccc 07:39:35 SkyScan query 07:39:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:39:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:36 Parameters OK 07:39:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:36 Set A/D data flow result=40 07:39:36 Set A/D channel type result=40 07:39:36 Set A/D encoding result=40 07:39:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:36 Set channel filter=0.000000e+000 result=40 07:39:36 Config A/D Result=40 07:39:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:36 Get A/D filter: -9.255963e+061 result=40 07:39:36 Get A/D value=-858993460 result=40 07:39:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:36 Parameters OK 07:39:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:36 Set A/D data flow result=40 07:39:36 Set A/D channel type result=40 07:39:36 Set A/D encoding result=40 07:39:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:36 Set channel filter=0.000000e+000 result=40 07:39:36 Config A/D Result=40 07:39:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:36 Get A/D filter: -9.255963e+061 result=40 07:39:36 Get A/D value=-858993460 result=40 07:39:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:36 Aux= 07:39:36 Message to Camera, serial 135527 queued 07:40:13 Received message from Master: op=PointingHead serial=135540 07:40:13 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:40:13 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:40:13 Point started: ret=0 07:40:13 point_skyscan result=0 07:40:14 Check angles 07:40:14 SkyScan query 07:40:15 SkyScan query done: ret=0 az=64.14<-4276 ze=66.555<-7563 Statuses=0009 0008 07:40:15 Msec=0 True Az=64.14 Ze=66.555 Az status=0009 Ze status=0008 07:40:15 Check angles 07:40:15 SkyScan query 07:40:15 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 07:40:15 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 07:40:16 Check angles 07:40:16 SkyScan query 07:40:16 SkyScan query done: ret=0 az=99.015<-6601 ze=66.495<-7567 Statuses=0009 0008 07:40:16 Msec=1500 True Az=99.015 Ze=66.495 Az status=0009 Ze status=0008 07:40:16 Check angles 07:40:16 SkyScan query 07:40:17 SkyScan query done: ret=0 az=116.535<-7769 ze=66.495<-7567 Statuses=0009 0008 07:40:17 Msec=2250 True Az=116.535 Ze=66.495 Az status=0009 Ze status=0008 07:40:17 Check angles 07:40:17 SkyScan query 07:40:18 SkyScan query done: ret=0 az=134.01<-8934 ze=66.495<-7567 Statuses=0009 0008 07:40:18 Msec=3000 True Az=134.01 Ze=66.495 Az status=0009 Ze status=0008 07:40:18 Check angles 07:40:18 SkyScan query 07:40:18 SkyScan query done: ret=0 az=151.47<-10098 ze=66.495<-7567 Statuses=0009 0008 07:40:18 Msec=3750 True Az=151.47 Ze=66.495 Az status=0009 Ze status=0008 07:40:19 Check angles 07:40:19 SkyScan query 07:40:19 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:40:19 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:40:19 Message to Master queued w/err=0: serial=135540 error=0 07:40:24 Received message from Master: op=Filter serial=135541 07:40:24 Color wheel filter change from 0 to 0 07:40:24 FLIGetFilterPos err=0 currentPosition=0 07:40:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:24 Filter is already there-color wheel unchanged 07:40:24 Received message from Master: op=Shutter serial=135542 07:40:24 Shutter LASER close 07:40:24 Received message from Camera: op=State serial=135544 07:40:24 GetSingleValue result=40 Value=cccccccc 07:40:24 SkyScan query 07:40:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:40:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:25 Parameters OK 07:40:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:25 Set A/D data flow result=40 07:40:25 Set A/D channel type result=40 07:40:25 Set A/D encoding result=40 07:40:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:25 Set channel filter=0.000000e+000 result=40 07:40:25 Config A/D Result=40 07:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:25 Get A/D filter: -9.255963e+061 result=40 07:40:25 Get A/D value=-858993460 result=40 07:40:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:25 Parameters OK 07:40:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:25 Set A/D data flow result=40 07:40:25 Set A/D channel type result=40 07:40:25 Set A/D encoding result=40 07:40:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:25 Set channel filter=0.000000e+000 result=40 07:40:25 Config A/D Result=40 07:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:25 Get A/D filter: -9.255963e+061 result=40 07:40:25 Get A/D value=-858993460 result=40 07:40:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:25 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:25 Aux= 07:40:25 Message to Camera, serial 135544 queued 07:41:02 Received message from Master: op=PointingHead serial=135557 07:41:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:41:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:41:02 Point started: ret=0 07:41:02 point_skyscan result=0 07:41:03 Check angles 07:41:03 SkyScan query 07:41:03 SkyScan query done: ret=0 az=134.595<-8973 ze=36.345<-9577 Statuses=0009 0009 07:41:03 Msec=0 True Az=134.595 Ze=36.345 Az status=0009 Ze status=0009 07:41:04 Check angles 07:41:04 SkyScan query 07:41:04 SkyScan query done: ret=0 az=116.64<-7776 ze=14.4<-11040 Statuses=0009 0009 07:41:04 Msec=750 True Az=116.64 Ze=14.4 Az status=0009 Ze status=0009 07:41:04 Check angles 07:41:04 SkyScan query 07:41:05 SkyScan query done: ret=0 az=99.42<-6628 ze=-6.06<-12404 Statuses=0009 0009 07:41:05 Msec=1500 True Az=99.42 Ze=-6.06 Az status=0009 Ze status=0009 07:41:05 Check angles 07:41:05 SkyScan query 07:41:06 SkyScan query done: ret=0 az=81.96<-5464 ze=-27.045<-13803 Statuses=0009 0009 07:41:06 Msec=2250 True Az=81.96 Ze=-27.045 Az status=0009 Ze status=0009 07:41:06 Check angles 07:41:06 SkyScan query 07:41:06 SkyScan query done: ret=0 az=63.99<-4266 ze=-38.58<-14572 Statuses=0009 0008 07:41:06 Msec=3000 True Az=63.99 Ze=-38.58 Az status=0009 Ze status=0008 07:41:07 Check angles 07:41:07 SkyScan query 07:41:07 SkyScan query done: ret=0 az=46.32<-3088 ze=-38.52<-14568 Statuses=0009 0008 07:41:07 Msec=3750 True Az=46.32 Ze=-38.52 Az status=0009 Ze status=0008 07:41:07 Check angles 07:41:07 SkyScan query 07:41:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:41:08 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:41:08 Message to Master queued w/err=0: serial=135557 error=0 07:41:13 Received message from Master: op=Filter serial=135558 07:41:13 Color wheel filter change from 0 to 0 07:41:13 FLIGetFilterPos err=0 currentPosition=0 07:41:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:13 Filter is already there-color wheel unchanged 07:41:13 Received message from Master: op=Shutter serial=135559 07:41:13 Shutter LASER close 07:41:13 Received message from Camera: op=State serial=135561 07:41:13 GetSingleValue result=40 Value=cccccccc 07:41:13 SkyScan query 07:41:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:41:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:14 Parameters OK 07:41:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:14 Set A/D data flow result=40 07:41:14 Set A/D channel type result=40 07:41:14 Set A/D encoding result=40 07:41:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:14 Set channel filter=0.000000e+000 result=40 07:41:14 Config A/D Result=40 07:41:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:14 Get A/D filter: -9.255963e+061 result=40 07:41:14 Get A/D value=-858993460 result=40 07:41:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:14 Parameters OK 07:41:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:14 Set A/D data flow result=40 07:41:14 Set A/D channel type result=40 07:41:14 Set A/D encoding result=40 07:41:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:14 Set channel filter=0.000000e+000 result=40 07:41:14 Config A/D Result=40 07:41:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:14 Get A/D filter: -9.255963e+061 result=40 07:41:14 Get A/D value=-858993460 result=40 07:41:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:14 Aux= 07:41:14 Message to Camera, serial 135561 queued 07:41:51 Received message from Master: op=PointingHead serial=135574 07:41:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:41:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:41:51 Point started: ret=0 07:41:51 point_skyscan result=0 07:41:52 Check angles 07:41:52 SkyScan query 07:41:52 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.46<-16564 Statuses=0009 0009 07:41:52 Msec=0 True Az=64.2 Ze=-68.46 Az status=0009 Ze status=0009 07:41:52 Check angles 07:41:52 SkyScan query 07:41:53 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.445<-17963 Statuses=0009 0009 07:41:53 Msec=750 True Az=81.6 Ze=-89.445 Az status=0009 Ze status=0009 07:41:53 Check angles 07:41:53 SkyScan query 07:41:54 SkyScan query done: ret=0 az=99.075<-6605 ze=-110.37<-19358 Statuses=0009 0009 07:41:54 Msec=1500 True Az=99.075 Ze=-110.37 Az status=0009 Ze status=0009 07:41:54 Check angles 07:41:54 SkyScan query 07:41:55 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.73<-20782 Statuses=0009 0009 07:41:55 Msec=2250 True Az=116.895 Ze=-131.73 Az status=0009 Ze status=0009 07:41:55 Check angles 07:41:55 SkyScan query 07:41:55 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.555<-21437 Statuses=0009 0008 07:41:55 Msec=3000 True Az=131.055 Ze=-141.555 Az status=0009 Ze status=0008 07:41:56 Check angles 07:41:56 SkyScan query 07:41:56 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 07:41:56 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 07:41:56 Message to Master queued w/err=0: serial=135574 error=0 07:42:01 Received message from Master: op=Filter serial=135575 07:42:01 Color wheel filter change from 0 to 0 07:42:01 FLIGetFilterPos err=0 currentPosition=0 07:42:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:01 Filter is already there-color wheel unchanged 07:42:01 Received message from Master: op=Shutter serial=135576 07:42:01 Shutter LASER close 07:42:01 Received message from Camera: op=State serial=135578 07:42:01 GetSingleValue result=40 Value=cccccccc 07:42:01 SkyScan query 07:42:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:42:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:02 Parameters OK 07:42:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:02 Set A/D data flow result=40 07:42:02 Set A/D channel type result=40 07:42:02 Set A/D encoding result=40 07:42:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:02 Set channel filter=0.000000e+000 result=40 07:42:02 Config A/D Result=40 07:42:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:02 Get A/D filter: -9.255963e+061 result=40 07:42:02 Get A/D value=-858993460 result=40 07:42:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:02 Parameters OK 07:42:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:02 Set A/D data flow result=40 07:42:02 Set A/D channel type result=40 07:42:02 Set A/D encoding result=40 07:42:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:02 Set channel filter=0.000000e+000 result=40 07:42:02 Config A/D Result=40 07:42:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:02 Get A/D filter: -9.255963e+061 result=40 07:42:02 Get A/D value=-858993460 result=40 07:42:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:02 Aux= 07:42:02 Message to Camera, serial 135578 queued 07:42:39 Received message from Master: op=PointingHead serial=135591 07:42:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:42:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:42:39 Point started: ret=0 07:42:39 point_skyscan result=0 07:42:40 Check angles 07:42:40 SkyScan query 07:42:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.375<-23425 Statuses=0009 0009 07:42:40 Msec=0 True Az=112.995 Ze=-171.375 Az status=0009 Ze status=0009 07:42:41 Check angles 07:42:41 SkyScan query 07:42:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:42:41 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:42:41 Message to Master queued w/err=0: serial=135591 error=0 07:42:46 Received message from Master: op=Filter serial=135592 07:42:46 Color wheel filter change from 0 to 0 07:42:46 FLIGetFilterPos err=0 currentPosition=0 07:42:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:46 Filter is already there-color wheel unchanged 07:42:46 Received message from Master: op=Shutter serial=135593 07:42:46 Shutter LASER open 07:42:47 Received message from Camera: op=State serial=135595 07:42:47 GetSingleValue result=40 Value=cccccccc 07:42:47 SkyScan query 07:42:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:42:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:47 Parameters OK 07:42:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:47 Set A/D data flow result=40 07:42:47 Set A/D channel type result=40 07:42:47 Set A/D encoding result=40 07:42:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:47 Set channel filter=0.000000e+000 result=40 07:42:47 Config A/D Result=40 07:42:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:47 Get A/D filter: -9.255963e+061 result=40 07:42:47 Get A/D value=-858993460 result=40 07:42:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:47 Parameters OK 07:42:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:47 Set A/D data flow result=40 07:42:47 Set A/D channel type result=40 07:42:47 Set A/D encoding result=40 07:42:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:47 Set channel filter=0.000000e+000 result=40 07:42:47 Config A/D Result=40 07:42:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:47 Get A/D filter: -9.255963e+061 result=40 07:42:47 Get A/D value=-858993460 result=40 07:42:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:47 Aux= 07:42:47 Message to Camera, serial 135595 queued 07:42:56 Received message from Master: op=Shutter serial=135605 07:42:56 Shutter LASER close 07:42:56 Received message from Master: op=PointingHead serial=135609 07:42:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:42:56 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:42:56 Point started: ret=0 07:42:56 point_skyscan result=0 07:42:57 Check angles 07:42:57 SkyScan query 07:42:58 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.28<-21552 Statuses=0009 0009 07:42:58 Msec=0 True Az=135.96 Ze=-143.28 Az status=0009 Ze status=0009 07:42:58 Check angles 07:42:58 SkyScan query 07:42:59 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.86<-20124 Statuses=0009 0009 07:42:59 Msec=750 True Az=153.81 Ze=-121.86 Az status=0009 Ze status=0009 07:42:59 Check angles 07:42:59 SkyScan query 07:42:59 SkyScan query done: ret=0 az=171.3<-11420 ze=-100.875<-18725 Statuses=0009 0009 07:42:59 Msec=1500 True Az=171.3 Ze=-100.875 Az status=0009 Ze status=0009 07:42:59 Check angles 07:42:59 SkyScan query 07:43:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.995<-17333 Statuses=0008 0009 07:43:00 Msec=2250 True Az=176.01 Ze=-79.995 Az status=0008 Ze status=0009 07:43:00 Check angles 07:43:00 SkyScan query 07:43:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.515<-15901 Statuses=0008 0009 07:43:01 Msec=3000 True Az=176.01 Ze=-58.515 Az status=0008 Ze status=0009 07:43:01 Check angles 07:43:01 SkyScan query 07:43:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:43:02 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:43:02 Message to Master queued w/err=0: serial=135609 error=0 07:43:07 Received message from Master: op=Filter serial=135610 07:43:07 Color wheel filter change from 0 to 0 07:43:07 FLIGetFilterPos err=0 currentPosition=0 07:43:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:07 Filter is already there-color wheel unchanged 07:43:07 Received message from Master: op=Shutter serial=135611 07:43:07 Shutter LASER close 07:43:07 Received message from Camera: op=State serial=135613 07:43:07 GetSingleValue result=40 Value=cccccccc 07:43:07 SkyScan query 07:43:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:43:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:08 Parameters OK 07:43:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:08 Set A/D data flow result=40 07:43:08 Set A/D channel type result=40 07:43:08 Set A/D encoding result=40 07:43:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:08 Set channel filter=0.000000e+000 result=40 07:43:08 Config A/D Result=40 07:43:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:08 Get A/D filter: -9.255963e+061 result=40 07:43:08 Get A/D value=-858993460 result=40 07:43:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:08 Parameters OK 07:43:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:08 Set A/D data flow result=40 07:43:08 Set A/D channel type result=40 07:43:08 Set A/D encoding result=40 07:43:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:08 Set channel filter=0.000000e+000 result=40 07:43:08 Config A/D Result=40 07:43:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:08 Get A/D filter: -9.255963e+061 result=40 07:43:08 Get A/D value=-858993460 result=40 07:43:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:08 Aux= 07:43:08 Message to Camera, serial 135613 queued 07:43:43 Received message from Master: op=PointingHead serial=135625 07:43:43 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:43:43 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:43:44 Point started: ret=0 07:43:44 point_skyscan result=0 07:43:45 Check angles 07:43:45 SkyScan query 07:43:45 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.33<-13422 Statuses=0009 0009 07:43:45 Msec=0 True Az=152.73 Ze=-21.33 Az status=0009 Ze status=0009 07:43:45 Check angles 07:43:45 SkyScan query 07:43:46 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.36<-12024 Statuses=0009 0009 07:43:46 Msec=750 True Az=135.105 Ze=-0.36 Az status=0009 Ze status=0009 07:43:46 Check angles 07:43:46 SkyScan query 07:43:47 SkyScan query done: ret=0 az=117.39<-7826 ze=21.06<-10596 Statuses=0009 0009 07:43:47 Msec=1500 True Az=117.39 Ze=21.06 Az status=0009 Ze status=0009 07:43:47 Check angles 07:43:47 SkyScan query 07:43:47 SkyScan query done: ret=0 az=99.96<-6664 ze=41.97<-9202 Statuses=0009 0009 07:43:47 Msec=2250 True Az=99.96 Ze=41.97 Az status=0009 Ze status=0009 07:43:48 Check angles 07:43:48 SkyScan query 07:43:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 07:43:48 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 07:43:48 Check angles 07:43:48 SkyScan query 07:43:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:43:49 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:43:49 Message to Master queued w/err=0: serial=135625 error=0 07:43:54 Received message from Master: op=Filter serial=135626 07:43:54 Color wheel filter change from 0 to 0 07:43:54 FLIGetFilterPos err=0 currentPosition=0 07:43:54 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:54 Filter is already there-color wheel unchanged 07:43:54 Received message from Master: op=Shutter serial=135627 07:43:54 Shutter LASER close 07:43:54 Received message from Camera: op=State serial=135629 07:43:54 GetSingleValue result=40 Value=cccccccc 07:43:54 SkyScan query 07:43:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:43:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:55 Parameters OK 07:43:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:55 Set A/D data flow result=40 07:43:55 Set A/D channel type result=40 07:43:55 Set A/D encoding result=40 07:43:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:55 Set channel filter=0.000000e+000 result=40 07:43:55 Config A/D Result=40 07:43:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:55 Get A/D filter: -9.255963e+061 result=40 07:43:55 Get A/D value=-858993460 result=40 07:43:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:55 Parameters OK 07:43:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:55 Set A/D data flow result=40 07:43:55 Set A/D channel type result=40 07:43:55 Set A/D encoding result=40 07:43:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:55 Set channel filter=0.000000e+000 result=40 07:43:55 Config A/D Result=40 07:43:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:55 Get A/D filter: -9.255963e+061 result=40 07:43:55 Get A/D value=-858993460 result=40 07:43:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:55 Aux= 07:43:55 Message to Camera, serial 135629 queued 07:44:32 Received message from Master: op=PointingHead serial=135642 07:44:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:44:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:44:32 Point started: ret=0 07:44:32 point_skyscan result=0 07:44:33 Check angles 07:44:33 SkyScan query 07:44:33 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 07:44:33 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 07:44:33 Check angles 07:44:33 SkyScan query 07:44:34 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 07:44:34 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 07:44:34 Check angles 07:44:34 SkyScan query 07:44:35 SkyScan query done: ret=0 az=144.825<-9655 ze=38.505<-9433 Statuses=0009 0008 07:44:35 Msec=1500 True Az=144.825 Ze=38.505 Az status=0009 Ze status=0008 07:44:35 Check angles 07:44:35 SkyScan query 07:44:35 SkyScan query done: ret=0 az=162.33<-10822 ze=38.505<-9433 Statuses=0009 0008 07:44:35 Msec=2250 True Az=162.33 Ze=38.505 Az status=0009 Ze status=0008 07:44:36 Check angles 07:44:36 SkyScan query 07:44:36 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 07:44:36 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 07:44:36 Check angles 07:44:36 SkyScan query 07:44:37 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:44:37 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:44:37 Message to Master queued w/err=0: serial=135642 error=0 07:44:42 Received message from Master: op=Filter serial=135643 07:44:42 Color wheel filter change from 0 to 0 07:44:42 FLIGetFilterPos err=0 currentPosition=0 07:44:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:42 Filter is already there-color wheel unchanged 07:44:42 Received message from Master: op=Shutter serial=135644 07:44:42 Shutter LASER close 07:44:42 Received message from Camera: op=State serial=135646 07:44:42 GetSingleValue result=40 Value=cccccccc 07:44:42 SkyScan query 07:44:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:44:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:43 Parameters OK 07:44:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:43 Set A/D data flow result=40 07:44:43 Set A/D channel type result=40 07:44:43 Set A/D encoding result=40 07:44:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:43 Set channel filter=0.000000e+000 result=40 07:44:43 Config A/D Result=40 07:44:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:43 Get A/D filter: -9.255963e+061 result=40 07:44:43 Get A/D value=-858993460 result=40 07:44:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:43 Parameters OK 07:44:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:43 Set A/D data flow result=40 07:44:43 Set A/D channel type result=40 07:44:43 Set A/D encoding result=40 07:44:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:43 Set channel filter=0.000000e+000 result=40 07:44:43 Config A/D Result=40 07:44:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:43 Get A/D filter: -9.255963e+061 result=40 07:44:43 Get A/D value=-858993460 result=40 07:44:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:43 Aux= 07:44:43 Message to Camera, serial 135646 queued 07:45:20 Received message from Master: op=PointingHead serial=135659 07:45:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:45:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:45:20 Point started: ret=0 07:45:20 point_skyscan result=0 07:45:21 Check angles 07:45:21 SkyScan query 07:45:21 SkyScan query done: ret=0 az=152.925<-10195 ze=8.535<-11431 Statuses=0009 0009 07:45:21 Msec=0 True Az=152.925 Ze=8.535 Az status=0009 Ze status=0009 07:45:21 Check angles 07:45:21 SkyScan query 07:45:22 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.375<-12825 Statuses=0009 0009 07:45:22 Msec=750 True Az=135.33 Ze=-12.375 Az status=0009 Ze status=0009 07:45:22 Check angles 07:45:22 SkyScan query 07:45:23 SkyScan query done: ret=0 az=117.9<-7860 ze=-33.36<-14224 Statuses=0009 0009 07:45:23 Msec=1500 True Az=117.9 Ze=-33.36 Az status=0009 Ze status=0009 07:45:23 Check angles 07:45:23 SkyScan query 07:45:24 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.54<-15436 Statuses=0009 0009 07:45:24 Msec=2250 True Az=100.395 Ze=-51.54 Az status=0009 Ze status=0009 07:45:24 Check angles 07:45:24 SkyScan query 07:45:24 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:45:24 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:45:24 Check angles 07:45:24 SkyScan query 07:45:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:45:25 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:45:25 Message to Master queued w/err=0: serial=135659 error=0 07:45:27 Received message from Master: op=Identify serial=135660 07:45:30 Received message from Master: op=Filter serial=135663 07:45:30 Color wheel filter change from 0 to 0 07:45:30 FLIGetFilterPos err=0 currentPosition=0 07:45:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:30 Filter is already there-color wheel unchanged 07:45:30 Received message from Master: op=Shutter serial=135664 07:45:30 Shutter LASER close 07:45:30 Received message from Camera: op=State serial=135666 07:45:30 GetSingleValue result=40 Value=cccccccc 07:45:30 SkyScan query 07:45:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:45:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:31 Parameters OK 07:45:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:31 Set A/D data flow result=40 07:45:31 Set A/D channel type result=40 07:45:31 Set A/D encoding result=40 07:45:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:31 Set channel filter=0.000000e+000 result=40 07:45:31 Config A/D Result=40 07:45:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:31 Get A/D filter: -9.255963e+061 result=40 07:45:31 Get A/D value=-858993460 result=40 07:45:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:31 Parameters OK 07:45:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:31 Set A/D data flow result=40 07:45:31 Set A/D channel type result=40 07:45:31 Set A/D encoding result=40 07:45:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:31 Set channel filter=0.000000e+000 result=40 07:45:31 Config A/D Result=40 07:45:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:31 Get A/D filter: -9.255963e+061 result=40 07:45:31 Get A/D value=-858993460 result=40 07:45:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:31 Aux= 07:45:31 Message to Camera, serial 135666 queued 07:46:08 Received message from Master: op=PointingHead serial=135679 07:46:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:46:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:46:08 Point started: ret=0 07:46:08 point_skyscan result=0 07:46:09 Check angles 07:46:09 SkyScan query 07:46:09 SkyScan query done: ret=0 az=108.81<-7254 ze=-81.06<-17404 Statuses=0009 0009 07:46:09 Msec=0 True Az=108.81 Ze=-81.06 Az status=0009 Ze status=0009 07:46:10 Check angles 07:46:10 SkyScan query 07:46:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 07:46:10 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 [UTC 2018-12-14 07:46:10] 07:46:10 Check angles 07:46:10 SkyScan query 07:46:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-125.25<-20350 Statuses=0008 0009 07:46:11 Msec=1500 True Az=112.995 Ze=-125.25 Az status=0008 Ze status=0009 07:46:11 Check angles 07:46:11 SkyScan query 07:46:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 07:46:12 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 07:46:12 Check angles 07:46:12 SkyScan query 07:46:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.36<-23024 Statuses=0008 0009 07:46:12 Msec=3000 True Az=112.995 Ze=-165.36 Az status=0008 Ze status=0009 07:46:13 Check angles 07:46:13 SkyScan query 07:46:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:46:13 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:46:13 Message to Master queued w/err=0: serial=135679 error=0 07:46:18 Received message from Master: op=Filter serial=135680 07:46:18 Color wheel filter change from 0 to 0 07:46:18 FLIGetFilterPos err=0 currentPosition=0 07:46:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:18 Filter is already there-color wheel unchanged 07:46:18 Received message from Master: op=Shutter serial=135681 07:46:18 Shutter LASER open 07:46:18 Received message from Camera: op=State serial=135683 07:46:18 GetSingleValue result=40 Value=cccccccc 07:46:18 SkyScan query 07:46:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:46:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:19 Parameters OK 07:46:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:19 Set A/D data flow result=40 07:46:19 Set A/D channel type result=40 07:46:19 Set A/D encoding result=40 07:46:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:19 Set channel filter=0.000000e+000 result=40 07:46:19 Config A/D Result=40 07:46:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:19 Get A/D filter: -9.255963e+061 result=40 07:46:19 Get A/D value=-858993460 result=40 07:46:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:19 Parameters OK 07:46:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:19 Set A/D data flow result=40 07:46:19 Set A/D channel type result=40 07:46:19 Set A/D encoding result=40 07:46:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:19 Set channel filter=0.000000e+000 result=40 07:46:19 Config A/D Result=40 07:46:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:19 Get A/D filter: -9.255963e+061 result=40 07:46:19 Get A/D value=-858993460 result=40 07:46:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:46:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:46:19 Aux= 07:46:19 Message to Camera, serial 135683 queued 07:46:27 Received message from Master: op=Shutter serial=135693 07:46:28 Shutter LASER close 07:46:28 Received message from Master: op=PointingHead serial=135697 07:46:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:46:28 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:46:28 Point started: ret=0 07:46:28 point_skyscan result=0 07:46:29 Check angles 07:46:29 SkyScan query 07:46:30 SkyScan query done: ret=0 az=89.505<-5967 ze=156.78<-1548 Statuses=0009 0009 07:46:30 Msec=0 True Az=89.505 Ze=156.78 Az status=0009 Ze status=0009 07:46:30 Check angles 07:46:30 SkyScan query 07:46:30 SkyScan query done: ret=0 az=72<-4800 ze=135.84<-2944 Statuses=0009 0009 07:46:30 Msec=750 True Az=72 Ze=135.84 Az status=0009 Ze status=0009 07:46:31 Check angles 07:46:31 SkyScan query 07:46:31 SkyScan query done: ret=0 az=54.555<-3637 ze=114.855<-4343 Statuses=0009 0009 07:46:31 Msec=1500 True Az=54.555 Ze=114.855 Az status=0009 Ze status=0009 07:46:31 Check angles 07:46:31 SkyScan query 07:46:32 SkyScan query done: ret=0 az=40.98<-2732 ze=93.915<-5739 Statuses=0009 0009 07:46:32 Msec=2250 True Az=40.98 Ze=93.915 Az status=0009 Ze status=0009 07:46:32 Check angles 07:46:32 SkyScan query 07:46:33 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 07:46:33 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 07:46:33 Check angles 07:46:33 SkyScan query 07:46:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 07:46:33 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 07:46:34 Check angles 07:46:34 SkyScan query 07:46:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:46:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:46:34 Message to Master queued w/err=0: serial=135697 error=0 07:46:39 Received message from Master: op=Filter serial=135698 07:46:39 Color wheel filter change from 0 to 0 07:46:39 FLIGetFilterPos err=0 currentPosition=0 07:46:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:39 Filter is already there-color wheel unchanged 07:46:39 Received message from Master: op=Shutter serial=135699 07:46:39 Shutter LASER close 07:46:39 Received message from Camera: op=State serial=135701 07:46:39 GetSingleValue result=40 Value=cccccccc 07:46:39 SkyScan query 07:46:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:46:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:40 Parameters OK 07:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:40 Set A/D data flow result=40 07:46:40 Set A/D channel type result=40 07:46:40 Set A/D encoding result=40 07:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:40 Set channel filter=0.000000e+000 result=40 07:46:40 Config A/D Result=40 07:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:40 Get A/D filter: -9.255963e+061 result=40 07:46:40 Get A/D value=-858993460 result=40 07:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:40 Parameters OK 07:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:40 Set A/D data flow result=40 07:46:40 Set A/D channel type result=40 07:46:40 Set A/D encoding result=40 07:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:40 Set channel filter=0.000000e+000 result=40 07:46:40 Config A/D Result=40 07:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:40 Get A/D filter: -9.255963e+061 result=40 07:46:40 Get A/D value=-858993460 result=40 07:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:46:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:46:40 Aux= 07:46:40 Message to Camera, serial 135701 queued 07:47:17 Received message from Master: op=PointingHead serial=135714 07:47:17 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:47:17 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:47:17 Point started: ret=0 07:47:17 point_skyscan result=0 07:47:18 Check angles 07:47:18 SkyScan query 07:47:19 SkyScan query done: ret=0 az=64.335<-4289 ze=66.54<-7564 Statuses=0009 0008 07:47:19 Msec=0 True Az=64.335 Ze=66.54 Az status=0009 Ze status=0008 07:47:19 Check angles 07:47:19 SkyScan query 07:47:19 SkyScan query done: ret=0 az=82.245<-5483 ze=66.495<-7567 Statuses=0009 0008 07:47:19 Msec=750 True Az=82.245 Ze=66.495 Az status=0009 Ze status=0008 07:47:20 Check angles 07:47:20 SkyScan query 07:47:20 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 07:47:20 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 07:47:20 Check angles 07:47:20 SkyScan query 07:47:21 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 07:47:21 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 07:47:21 Check angles 07:47:21 SkyScan query 07:47:22 SkyScan query done: ret=0 az=135<-9000 ze=66.495<-7567 Statuses=0009 0008 07:47:22 Msec=3000 True Az=135 Ze=66.495 Az status=0009 Ze status=0008 07:47:22 Check angles 07:47:22 SkyScan query 07:47:22 SkyScan query done: ret=0 az=152.34<-10156 ze=66.495<-7567 Statuses=0009 0008 07:47:22 Msec=3750 True Az=152.34 Ze=66.495 Az status=0009 Ze status=0008 07:47:23 Check angles 07:47:23 SkyScan query 07:47:23 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:47:23 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:47:23 Message to Master queued w/err=0: serial=135714 error=0 07:47:28 Received message from Master: op=Filter serial=135715 07:47:28 Color wheel filter change from 0 to 0 07:47:28 FLIGetFilterPos err=0 currentPosition=0 07:47:28 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:28 Filter is already there-color wheel unchanged 07:47:28 Received message from Master: op=Shutter serial=135716 07:47:28 Shutter LASER close 07:47:28 Received message from Camera: op=State serial=135718 07:47:28 GetSingleValue result=40 Value=cccccccc 07:47:28 SkyScan query 07:47:29 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:47:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:29 Parameters OK 07:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:29 Set A/D data flow result=40 07:47:29 Set A/D channel type result=40 07:47:29 Set A/D encoding result=40 07:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:29 Set channel filter=0.000000e+000 result=40 07:47:29 Config A/D Result=40 07:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:29 Get A/D filter: -9.255963e+061 result=40 07:47:29 Get A/D value=-858993460 result=40 07:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:29 Parameters OK 07:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:29 Set A/D data flow result=40 07:47:29 Set A/D channel type result=40 07:47:29 Set A/D encoding result=40 07:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:29 Set channel filter=0.000000e+000 result=40 07:47:29 Config A/D Result=40 07:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:29 Get A/D filter: -9.255963e+061 result=40 07:47:29 Get A/D value=-858993460 result=40 07:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:29 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:29 Aux= 07:47:29 Message to Camera, serial 135718 queued 07:48:06 Received message from Master: op=PointingHead serial=135731 07:48:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:48:06 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:48:06 Point started: ret=0 07:48:06 point_skyscan result=0 07:48:07 Check angles 07:48:07 SkyScan query 07:48:07 SkyScan query done: ret=0 az=135.195<-9013 ze=36.87<-9542 Statuses=0009 0009 07:48:07 Msec=0 True Az=135.195 Ze=36.87 Az status=0009 Ze status=0009 07:48:08 Check angles 07:48:08 SkyScan query 07:48:08 SkyScan query done: ret=0 az=117.33<-7822 ze=15.555<-10963 Statuses=0009 0009 07:48:08 Msec=750 True Az=117.33 Ze=15.555 Az status=0009 Ze status=0009 07:48:08 Check angles 07:48:08 SkyScan query 07:48:09 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.61<-12374 Statuses=0009 0009 07:48:09 Msec=1500 True Az=99.93 Ze=-5.61 Az status=0009 Ze status=0009 07:48:09 Check angles 07:48:09 SkyScan query 07:48:10 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.4<-13760 Statuses=0009 0009 07:48:10 Msec=2250 True Az=82.44 Ze=-26.4 Az status=0009 Ze status=0009 07:48:10 Check angles 07:48:10 SkyScan query 07:48:10 SkyScan query done: ret=0 az=64.62<-4308 ze=-38.58<-14572 Statuses=0009 0008 07:48:10 Msec=3000 True Az=64.62 Ze=-38.58 Az status=0009 Ze status=0008 07:48:11 Check angles 07:48:11 SkyScan query 07:48:11 SkyScan query done: ret=0 az=47.175<-3145 ze=-38.52<-14568 Statuses=0009 0008 07:48:11 Msec=3750 True Az=47.175 Ze=-38.52 Az status=0009 Ze status=0008 07:48:11 Check angles 07:48:11 SkyScan query 07:48:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:48:12 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:48:12 Message to Master queued w/err=0: serial=135731 error=0 07:48:17 Received message from Master: op=Filter serial=135732 07:48:17 Color wheel filter change from 0 to 0 07:48:17 FLIGetFilterPos err=0 currentPosition=0 07:48:17 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:17 Filter is already there-color wheel unchanged 07:48:17 Received message from Master: op=Shutter serial=135733 07:48:17 Shutter LASER close 07:48:17 Received message from Camera: op=State serial=135735 07:48:17 GetSingleValue result=40 Value=cccccccc 07:48:17 SkyScan query 07:48:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:48:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:18 Parameters OK 07:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:18 Set A/D data flow result=40 07:48:18 Set A/D channel type result=40 07:48:18 Set A/D encoding result=40 07:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:18 Set channel filter=0.000000e+000 result=40 07:48:18 Config A/D Result=40 07:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:18 Get A/D filter: -9.255963e+061 result=40 07:48:18 Get A/D value=-858993460 result=40 07:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:18 Parameters OK 07:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:18 Set A/D data flow result=40 07:48:18 Set A/D channel type result=40 07:48:18 Set A/D encoding result=40 07:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:18 Set channel filter=0.000000e+000 result=40 07:48:18 Config A/D Result=40 07:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:18 Get A/D filter: -9.255963e+061 result=40 07:48:18 Get A/D value=-858993460 result=40 07:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:18 Aux= 07:48:18 Message to Camera, serial 135735 queued 07:48:54 Received message from Master: op=PointingHead serial=135747 07:48:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:48:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:48:54 Point started: ret=0 07:48:54 point_skyscan result=0 07:48:55 Check angles 07:48:55 SkyScan query 07:48:55 SkyScan query done: ret=0 az=63.75<-4250 ze=-67.965<-16531 Statuses=0009 0009 07:48:55 Msec=0 True Az=63.75 Ze=-67.965 Az status=0009 Ze status=0009 07:48:55 Check angles 07:48:55 SkyScan query 07:48:56 SkyScan query done: ret=0 az=81.24<-5416 ze=-88.95<-17930 Statuses=0009 0009 07:48:56 Msec=750 True Az=81.24 Ze=-88.95 Az status=0009 Ze status=0009 07:48:56 Check angles 07:48:56 SkyScan query 07:48:57 SkyScan query done: ret=0 az=98.67<-6578 ze=-109.86<-19324 Statuses=0009 0009 07:48:57 Msec=1500 True Az=98.67 Ze=-109.86 Az status=0009 Ze status=0009 07:48:57 Check angles 07:48:57 SkyScan query 07:48:58 SkyScan query done: ret=0 az=116.07<-7738 ze=-130.86<-20724 Statuses=0009 0009 07:48:58 Msec=2250 True Az=116.07 Ze=-130.86 Az status=0009 Ze status=0009 07:48:58 Check angles 07:48:58 SkyScan query 07:48:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 07:48:58 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 07:48:58 Check angles 07:48:58 SkyScan query 07:48:59 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:48:59 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:48:59 Message to Master queued w/err=0: serial=135747 error=0 07:49:04 Received message from Master: op=Filter serial=135748 07:49:04 Color wheel filter change from 0 to 0 07:49:04 FLIGetFilterPos err=0 currentPosition=0 07:49:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:04 Filter is already there-color wheel unchanged 07:49:04 Received message from Master: op=Shutter serial=135749 07:49:04 Shutter LASER close 07:49:04 Received message from Camera: op=State serial=135751 07:49:04 GetSingleValue result=40 Value=cccccccc 07:49:04 SkyScan query 07:49:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:49:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:05 Parameters OK 07:49:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:05 Set A/D data flow result=40 07:49:05 Set A/D channel type result=40 07:49:05 Set A/D encoding result=40 07:49:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:05 Set channel filter=0.000000e+000 result=40 07:49:05 Config A/D Result=40 07:49:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:05 Get A/D filter: -9.255963e+061 result=40 07:49:05 Get A/D value=-858993460 result=40 07:49:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:05 Parameters OK 07:49:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:05 Set A/D data flow result=40 07:49:05 Set A/D channel type result=40 07:49:05 Set A/D encoding result=40 07:49:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:05 Set channel filter=0.000000e+000 result=40 07:49:05 Config A/D Result=40 07:49:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:05 Get A/D filter: -9.255963e+061 result=40 07:49:05 Get A/D value=-858993460 result=40 07:49:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:05 Aux= 07:49:05 Message to Camera, serial 135751 queued 07:49:42 Received message from Master: op=PointingHead serial=135764 07:49:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:49:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:49:42 Point started: ret=0 07:49:42 point_skyscan result=0 07:49:43 Check angles 07:49:43 SkyScan query 07:49:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 07:49:43 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 07:49:44 Check angles 07:49:44 SkyScan query 07:49:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:49:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:49:44 Message to Master queued w/err=0: serial=135764 error=0 07:49:49 Received message from Master: op=Filter serial=135765 07:49:49 Color wheel filter change from 0 to 0 07:49:49 FLIGetFilterPos err=0 currentPosition=0 07:49:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:49 Filter is already there-color wheel unchanged 07:49:49 Received message from Master: op=Shutter serial=135766 07:49:49 Shutter LASER open 07:49:49 Received message from Camera: op=State serial=135768 07:49:49 GetSingleValue result=40 Value=cccccccc 07:49:49 SkyScan query 07:49:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:49:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:50 Parameters OK 07:49:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:50 Set A/D data flow result=40 07:49:50 Set A/D channel type result=40 07:49:50 Set A/D encoding result=40 07:49:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:50 Set channel filter=0.000000e+000 result=40 07:49:50 Config A/D Result=40 07:49:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:50 Get A/D filter: -9.255963e+061 result=40 07:49:50 Get A/D value=-858993460 result=40 07:49:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:50 Parameters OK 07:49:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:50 Set A/D data flow result=40 07:49:50 Set A/D channel type result=40 07:49:50 Set A/D encoding result=40 07:49:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:50 Set channel filter=0.000000e+000 result=40 07:49:50 Config A/D Result=40 07:49:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:50 Get A/D filter: -9.255963e+061 result=40 07:49:50 Get A/D value=-858993460 result=40 07:49:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:50 Aux= 07:49:50 Message to Camera, serial 135768 queued 07:49:58 Received message from Master: op=Shutter serial=135778 07:49:58 Shutter LASER close 07:49:59 Received message from Master: op=PointingHead serial=135782 07:49:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:49:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:49:59 Point started: ret=0 07:49:59 point_skyscan result=0 07:50:00 Check angles 07:50:00 SkyScan query 07:50:01 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.535<-21569 Statuses=0009 0009 07:50:01 Msec=0 True Az=135.72 Ze=-143.535 Az status=0009 Ze status=0009 07:50:01 Check angles 07:50:01 SkyScan query 07:50:01 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.535<-20169 Statuses=0009 0009 07:50:01 Msec=750 True Az=153.225 Ze=-122.535 Az status=0009 Ze status=0009 07:50:02 Check angles 07:50:02 SkyScan query 07:50:02 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.685<-18779 Statuses=0009 0009 07:50:02 Msec=1500 True Az=170.79 Ze=-101.685 Az status=0009 Ze status=0009 07:50:02 Check angles 07:50:02 SkyScan query 07:50:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.61<-17374 Statuses=0008 0009 07:50:03 Msec=2250 True Az=176.01 Ze=-80.61 Az status=0008 Ze status=0009 07:50:03 Check angles 07:50:03 SkyScan query 07:50:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.685<-15979 Statuses=0008 0009 07:50:04 Msec=3000 True Az=176.01 Ze=-59.685 Az status=0008 Ze status=0009 07:50:04 Check angles 07:50:04 SkyScan query 07:50:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:50:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:50:04 Message to Master queued w/err=0: serial=135782 error=0 07:50:09 Received message from Master: op=Filter serial=135783 07:50:09 Color wheel filter change from 0 to 0 07:50:09 FLIGetFilterPos err=0 currentPosition=0 07:50:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:09 Filter is already there-color wheel unchanged 07:50:10 Received message from Master: op=Shutter serial=135784 07:50:10 Shutter LASER close 07:50:10 Received message from Camera: op=State serial=135786 07:50:10 GetSingleValue result=40 Value=cccccccc 07:50:10 SkyScan query 07:50:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:50:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:10 Parameters OK 07:50:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:10 Set A/D data flow result=40 07:50:10 Set A/D channel type result=40 07:50:10 Set A/D encoding result=40 07:50:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:10 Set channel filter=0.000000e+000 result=40 07:50:10 Config A/D Result=40 07:50:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:10 Get A/D filter: -9.255963e+061 result=40 07:50:10 Get A/D value=-858993460 result=40 07:50:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:10 Parameters OK 07:50:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:10 Set A/D data flow result=40 07:50:10 Set A/D channel type result=40 07:50:10 Set A/D encoding result=40 07:50:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:10 Set channel filter=0.000000e+000 result=40 07:50:10 Config A/D Result=40 07:50:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:10 Get A/D filter: -9.255963e+061 result=40 07:50:10 Get A/D value=-858993460 result=40 07:50:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:10 Aux= 07:50:10 Message to Camera, serial 135786 queued 07:50:46 Received message from Master: op=PointingHead serial=135798 07:50:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:50:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:50:47 Point started: ret=0 07:50:47 point_skyscan result=0 07:50:47 Check angles 07:50:47 SkyScan query 07:50:48 SkyScan query done: ret=0 az=153.21<-10214 ze=-21.915<-13461 Statuses=0009 0009 07:50:48 Msec=0 True Az=153.21 Ze=-21.915 Az status=0009 Ze status=0009 07:50:48 Check angles 07:50:48 SkyScan query 07:50:49 SkyScan query done: ret=0 az=135.78<-9052 ze=-0.96<-12064 Statuses=0009 0009 07:50:49 Msec=750 True Az=135.78 Ze=-0.96 Az status=0009 Ze status=0009 07:50:49 Check angles 07:50:49 SkyScan query 07:50:49 SkyScan query done: ret=0 az=118.215<-7881 ze=19.95<-10670 Statuses=0009 0009 07:50:49 Msec=1500 True Az=118.215 Ze=19.95 Az status=0009 Ze status=0009 07:50:50 Check angles 07:50:50 SkyScan query 07:50:50 SkyScan query done: ret=0 az=100.425<-6695 ze=41.37<-9242 Statuses=0009 0009 07:50:50 Msec=2250 True Az=100.425 Ze=41.37 Az status=0009 Ze status=0009 07:50:50 Check angles 07:50:50 SkyScan query 07:50:51 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 07:50:51 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 07:50:51 Check angles 07:50:51 SkyScan query 07:50:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:50:52 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:50:52 Message to Master queued w/err=0: serial=135798 error=0 07:50:57 Received message from Master: op=Filter serial=135799 07:50:57 Color wheel filter change from 0 to 0 07:50:57 FLIGetFilterPos err=0 currentPosition=0 07:50:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:57 Filter is already there-color wheel unchanged 07:50:57 Received message from Master: op=Shutter serial=135800 07:50:57 Shutter LASER close 07:50:57 Received message from Camera: op=State serial=135802 07:50:57 GetSingleValue result=40 Value=cccccccc 07:50:57 SkyScan query 07:50:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:50:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:58 Parameters OK 07:50:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:58 Set A/D data flow result=40 07:50:58 Set A/D channel type result=40 07:50:58 Set A/D encoding result=40 07:50:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:58 Set channel filter=0.000000e+000 result=40 07:50:58 Config A/D Result=40 07:50:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:58 Get A/D filter: -9.255963e+061 result=40 07:50:58 Get A/D value=-858993460 result=40 07:50:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:58 Parameters OK 07:50:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:58 Set A/D data flow result=40 07:50:58 Set A/D channel type result=40 07:50:58 Set A/D encoding result=40 07:50:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:58 Set channel filter=0.000000e+000 result=40 07:50:58 Config A/D Result=40 07:50:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:58 Get A/D filter: -9.255963e+061 result=40 07:50:58 Get A/D value=-858993460 result=40 07:50:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:58 Aux= 07:50:58 Message to Camera, serial 135802 queued 07:51:34 Received message from Master: op=PointingHead serial=135815 07:51:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:51:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:51:35 Point started: ret=0 07:51:35 point_skyscan result=0 07:51:35 Check angles 07:51:35 SkyScan query 07:51:36 SkyScan query done: ret=0 az=109.41<-7294 ze=38.49<-9434 Statuses=0009 0008 07:51:36 Msec=0 True Az=109.41 Ze=38.49 Az status=0009 Ze status=0008 07:51:36 Check angles 07:51:36 SkyScan query 07:51:37 SkyScan query done: ret=0 az=126.93<-8462 ze=38.505<-9433 Statuses=0009 0008 07:51:37 Msec=750 True Az=126.93 Ze=38.505 Az status=0009 Ze status=0008 07:51:37 Check angles 07:51:37 SkyScan query 07:51:38 SkyScan query done: ret=0 az=144.69<-9646 ze=38.505<-9433 Statuses=0009 0008 07:51:38 Msec=1500 True Az=144.69 Ze=38.505 Az status=0009 Ze status=0008 07:51:38 Check angles 07:51:38 SkyScan query 07:51:38 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 07:51:38 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 07:51:38 Check angles 07:51:38 SkyScan query 07:51:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:51:39 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:51:39 Check angles 07:51:39 SkyScan query 07:51:40 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:51:40 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:51:40 Message to Master queued w/err=0: serial=135815 error=0 07:51:45 Received message from Master: op=Filter serial=135816 07:51:45 Color wheel filter change from 0 to 0 07:51:45 FLIGetFilterPos err=0 currentPosition=0 07:51:45 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:45 Filter is already there-color wheel unchanged 07:51:45 Received message from Master: op=Shutter serial=135817 07:51:45 Shutter LASER close 07:51:45 Received message from Camera: op=State serial=135819 07:51:45 GetSingleValue result=40 Value=cccccccc 07:51:45 SkyScan query 07:51:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:51:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:46 Parameters OK 07:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:46 Set A/D data flow result=40 07:51:46 Set A/D channel type result=40 07:51:46 Set A/D encoding result=40 07:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:46 Set channel filter=0.000000e+000 result=40 07:51:46 Config A/D Result=40 07:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:46 Get A/D filter: -9.255963e+061 result=40 07:51:46 Get A/D value=-858993460 result=40 07:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:46 Parameters OK 07:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:46 Set A/D data flow result=40 07:51:46 Set A/D channel type result=40 07:51:46 Set A/D encoding result=40 07:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:46 Set channel filter=0.000000e+000 result=40 07:51:46 Config A/D Result=40 07:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:46 Get A/D filter: -9.255963e+061 result=40 07:51:46 Get A/D value=-858993460 result=40 07:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:46 Aux= 07:51:46 Message to Camera, serial 135819 queued 07:52:22 Received message from Master: op=PointingHead serial=135832 07:52:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:52:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:52:23 Point started: ret=0 07:52:23 point_skyscan result=0 07:52:24 Check angles 07:52:24 SkyScan query 07:52:24 SkyScan query done: ret=0 az=153.12<-10208 ze=8.835<-11411 Statuses=0009 0009 07:52:24 Msec=0 True Az=153.12 Ze=8.835 Az status=0009 Ze status=0009 07:52:24 Check angles 07:52:24 SkyScan query 07:52:25 SkyScan query done: ret=0 az=135.66<-9044 ze=-12.165<-12811 Statuses=0009 0009 07:52:25 Msec=750 True Az=135.66 Ze=-12.165 Az status=0009 Ze status=0009 07:52:25 Check angles 07:52:25 SkyScan query 07:52:26 SkyScan query done: ret=0 az=118.125<-7875 ze=-33.075<-14205 Statuses=0009 0009 07:52:26 Msec=1500 True Az=118.125 Ze=-33.075 Az status=0009 Ze status=0009 07:52:26 Check angles 07:52:26 SkyScan query 07:52:26 SkyScan query done: ret=0 az=100.74<-6716 ze=-51.525<-15435 Statuses=0009 0009 07:52:26 Msec=2250 True Az=100.74 Ze=-51.525 Az status=0009 Ze status=0009 07:52:27 Check angles 07:52:27 SkyScan query 07:52:27 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:52:27 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:52:27 Check angles 07:52:27 SkyScan query 07:52:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:52:28 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:52:28 Message to Master queued w/err=0: serial=135832 error=0 07:52:33 Received message from Master: op=Filter serial=135833 07:52:33 Color wheel filter change from 0 to 0 07:52:33 FLIGetFilterPos err=0 currentPosition=0 07:52:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:33 Filter is already there-color wheel unchanged 07:52:33 Received message from Master: op=Shutter serial=135834 07:52:33 Shutter LASER close 07:52:33 Received message from Camera: op=State serial=135836 07:52:33 GetSingleValue result=40 Value=cccccccc 07:52:33 SkyScan query 07:52:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:52:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:34 Parameters OK 07:52:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:34 Set A/D data flow result=40 07:52:34 Set A/D channel type result=40 07:52:34 Set A/D encoding result=40 07:52:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:34 Set channel filter=0.000000e+000 result=40 07:52:34 Config A/D Result=40 07:52:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:34 Get A/D filter: -9.255963e+061 result=40 07:52:34 Get A/D value=-858993460 result=40 07:52:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:34 Parameters OK 07:52:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:34 Set A/D data flow result=40 07:52:34 Set A/D channel type result=40 07:52:34 Set A/D encoding result=40 07:52:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:34 Set channel filter=0.000000e+000 result=40 07:52:34 Config A/D Result=40 07:52:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:34 Get A/D filter: -9.255963e+061 result=40 07:52:34 Get A/D value=-858993460 result=40 07:52:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:34 Aux= 07:52:34 Message to Camera, serial 135836 queued 07:53:11 Received message from Master: op=PointingHead serial=135849 07:53:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:53:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:53:11 Point started: ret=0 07:53:11 point_skyscan result=0 07:53:12 Check angles 07:53:12 SkyScan query 07:53:12 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.705<-17447 Statuses=0009 0009 07:53:12 Msec=0 True Az=109.335 Ze=-81.705 Az status=0009 Ze status=0009 07:53:12 Check angles 07:53:12 SkyScan query 07:53:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.66<-18844 Statuses=0008 0009 07:53:13 Msec=750 True Az=112.995 Ze=-102.66 Az status=0008 Ze status=0009 07:53:13 Check angles 07:53:13 SkyScan query 07:53:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 07:53:14 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 07:53:14 Check angles 07:53:14 SkyScan query 07:53:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.525<-21635 Statuses=0008 0009 07:53:15 Msec=2250 True Az=112.995 Ze=-144.525 Az status=0008 Ze status=0009 07:53:15 Check angles 07:53:15 SkyScan query 07:53:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 07:53:15 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 07:53:15 Check angles 07:53:15 SkyScan query 07:53:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:53:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:53:16 Message to Master queued w/err=0: serial=135849 error=0 07:53:21 Received message from Master: op=Filter serial=135850 07:53:21 Color wheel filter change from 0 to 0 07:53:21 FLIGetFilterPos err=0 currentPosition=0 07:53:21 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:21 Filter is already there-color wheel unchanged 07:53:21 Received message from Master: op=Shutter serial=135851 07:53:21 Shutter LASER open 07:53:21 Received message from Camera: op=State serial=135853 07:53:21 GetSingleValue result=40 Value=cccccccc 07:53:21 SkyScan query 07:53:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:53:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:22 Parameters OK 07:53:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:22 Set A/D data flow result=40 07:53:22 Set A/D channel type result=40 07:53:22 Set A/D encoding result=40 07:53:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:22 Set channel filter=0.000000e+000 result=40 07:53:22 Config A/D Result=40 07:53:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:22 Get A/D filter: -9.255963e+061 result=40 07:53:22 Get A/D value=-858993460 result=40 07:53:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:22 Parameters OK 07:53:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:22 Set A/D data flow result=40 07:53:22 Set A/D channel type result=40 07:53:22 Set A/D encoding result=40 07:53:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:22 Set channel filter=0.000000e+000 result=40 07:53:22 Config A/D Result=40 07:53:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:22 Get A/D filter: -9.255963e+061 result=40 07:53:22 Get A/D value=-858993460 result=40 07:53:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:22 Aux= 07:53:22 Message to Camera, serial 135853 queued 07:53:30 Received message from Master: op=Shutter serial=135863 07:53:30 Shutter LASER close 07:53:31 Received message from Master: op=PointingHead serial=135867 07:53:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:53:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:53:31 Point started: ret=0 07:53:31 point_skyscan result=0 07:53:32 Check angles 07:53:32 SkyScan query 07:53:33 SkyScan query done: ret=0 az=90.075<-6005 ze=157.44<-1504 Statuses=0009 0009 07:53:33 Msec=0 True Az=90.075 Ze=157.44 Az status=0009 Ze status=0009 07:53:33 Check angles 07:53:33 SkyScan query 07:53:33 SkyScan query done: ret=0 az=72.57<-4838 ze=136.44<-2904 Statuses=0009 0009 07:53:33 Msec=750 True Az=72.57 Ze=136.44 Az status=0009 Ze status=0009 07:53:33 Check angles 07:53:33 SkyScan query 07:53:34 SkyScan query done: ret=0 az=55.155<-3677 ze=115.545<-4297 Statuses=0009 0009 07:53:34 Msec=1500 True Az=55.155 Ze=115.545 Az status=0009 Ze status=0009 07:53:34 Check angles 07:53:34 SkyScan query 07:53:35 SkyScan query done: ret=0 az=40.98<-2732 ze=94.11<-5726 Statuses=0009 0009 07:53:35 Msec=2250 True Az=40.98 Ze=94.11 Az status=0009 Ze status=0009 07:53:35 Check angles 07:53:35 SkyScan query 07:53:36 SkyScan query done: ret=0 az=40.995<-2733 ze=73.14<-7124 Statuses=0008 0009 07:53:36 Msec=3000 True Az=40.995 Ze=73.14 Az status=0008 Ze status=0009 07:53:36 Check angles 07:53:36 SkyScan query 07:53:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 07:53:36 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 07:53:36 Check angles 07:53:36 SkyScan query 07:53:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:53:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:53:37 Message to Master queued w/err=0: serial=135867 error=0 07:53:42 Received message from Master: op=Filter serial=135868 07:53:42 Color wheel filter change from 0 to 0 07:53:42 FLIGetFilterPos err=0 currentPosition=0 07:53:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:42 Filter is already there-color wheel unchanged 07:53:42 Received message from Master: op=Shutter serial=135869 07:53:42 Shutter LASER close 07:53:42 Received message from Camera: op=State serial=135871 07:53:42 GetSingleValue result=40 Value=cccccccc 07:53:42 SkyScan query 07:53:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:53:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:43 Parameters OK 07:53:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:43 Set A/D data flow result=40 07:53:43 Set A/D channel type result=40 07:53:43 Set A/D encoding result=40 07:53:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:43 Set channel filter=0.000000e+000 result=40 07:53:43 Config A/D Result=40 07:53:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:43 Get A/D filter: -9.255963e+061 result=40 07:53:43 Get A/D value=-858993460 result=40 07:53:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:43 Parameters OK 07:53:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:43 Set A/D data flow result=40 07:53:43 Set A/D channel type result=40 07:53:43 Set A/D encoding result=40 07:53:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:43 Set channel filter=0.000000e+000 result=40 07:53:43 Config A/D Result=40 07:53:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:43 Get A/D filter: -9.255963e+061 result=40 07:53:43 Get A/D value=-858993460 result=40 07:53:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:43 Aux= 07:53:43 Message to Camera, serial 135871 queued 07:54:20 Received message from Master: op=PointingHead serial=135884 07:54:20 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:54:20 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:54:20 Point started: ret=0 07:54:20 point_skyscan result=0 07:54:21 Check angles 07:54:21 SkyScan query 07:54:22 SkyScan query done: ret=0 az=64.38<-4292 ze=66.54<-7564 Statuses=0009 0008 07:54:22 Msec=0 True Az=64.38 Ze=66.54 Az status=0009 Ze status=0008 07:54:22 Check angles 07:54:22 SkyScan query 07:54:22 SkyScan query done: ret=0 az=81.885<-5459 ze=66.495<-7567 Statuses=0009 0008 07:54:22 Msec=750 True Az=81.885 Ze=66.495 Az status=0009 Ze status=0008 07:54:22 Check angles 07:54:22 SkyScan query 07:54:23 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 07:54:23 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 07:54:23 Check angles 07:54:23 SkyScan query 07:54:24 SkyScan query done: ret=0 az=116.835<-7789 ze=66.495<-7567 Statuses=0009 0008 07:54:24 Msec=2250 True Az=116.835 Ze=66.495 Az status=0009 Ze status=0008 07:54:24 Check angles 07:54:24 SkyScan query 07:54:25 SkyScan query done: ret=0 az=134.325<-8955 ze=66.495<-7567 Statuses=0009 0008 07:54:25 Msec=3000 True Az=134.325 Ze=66.495 Az status=0009 Ze status=0008 07:54:25 Check angles 07:54:25 SkyScan query 07:54:25 SkyScan query done: ret=0 az=151.71<-10114 ze=66.495<-7567 Statuses=0009 0008 07:54:25 Msec=3750 True Az=151.71 Ze=66.495 Az status=0009 Ze status=0008 07:54:25 Check angles 07:54:25 SkyScan query 07:54:26 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:54:26 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:54:26 Message to Master queued w/err=0: serial=135884 error=0 07:54:31 Received message from Master: op=Filter serial=135885 07:54:31 Color wheel filter change from 0 to 0 07:54:31 FLIGetFilterPos err=0 currentPosition=0 07:54:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:31 Filter is already there-color wheel unchanged 07:54:31 Received message from Master: op=Shutter serial=135886 07:54:31 Shutter LASER close 07:54:31 Received message from Camera: op=State serial=135888 07:54:31 GetSingleValue result=40 Value=cccccccc 07:54:31 SkyScan query 07:54:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:54:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:32 Parameters OK 07:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:32 Set A/D data flow result=40 07:54:32 Set A/D channel type result=40 07:54:32 Set A/D encoding result=40 07:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:32 Set channel filter=0.000000e+000 result=40 07:54:32 Config A/D Result=40 07:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:32 Get A/D filter: -9.255963e+061 result=40 07:54:32 Get A/D value=-858993460 result=40 07:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:32 Parameters OK 07:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:32 Set A/D data flow result=40 07:54:32 Set A/D channel type result=40 07:54:32 Set A/D encoding result=40 07:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:32 Set channel filter=0.000000e+000 result=40 07:54:32 Config A/D Result=40 07:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:32 Get A/D filter: -9.255963e+061 result=40 07:54:32 Get A/D value=-858993460 result=40 07:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:32 Aux= 07:54:32 Message to Camera, serial 135888 queued 07:55:09 Received message from Master: op=PointingHead serial=135901 07:55:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:55:09 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:55:09 Point started: ret=0 07:55:09 point_skyscan result=0 07:55:10 Check angles 07:55:10 SkyScan query 07:55:10 SkyScan query done: ret=0 az=135.195<-9013 ze=36.96<-9536 Statuses=0009 0009 07:55:10 Msec=0 True Az=135.195 Ze=36.96 Az status=0009 Ze status=0009 07:55:10 Check angles 07:55:10 SkyScan query 07:55:11 SkyScan query done: ret=0 az=117.285<-7819 ze=15.66<-10956 Statuses=0009 0009 07:55:11 Msec=750 True Az=117.285 Ze=15.66 Az status=0009 Ze status=0009 07:55:11 Check angles 07:55:11 SkyScan query 07:55:12 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.37<-12358 Statuses=0009 0009 07:55:12 Msec=1500 True Az=99.885 Ze=-5.37 Az status=0009 Ze status=0009 07:55:12 Check angles 07:55:12 SkyScan query 07:55:13 SkyScan query done: ret=0 az=82.455<-5497 ze=-26.325<-13755 Statuses=0009 0009 07:55:13 Msec=2250 True Az=82.455 Ze=-26.325 Az status=0009 Ze status=0009 07:55:13 Check angles 07:55:13 SkyScan query 07:55:13 SkyScan query done: ret=0 az=64.905<-4327 ze=-38.58<-14572 Statuses=0009 0008 07:55:13 Msec=3000 True Az=64.905 Ze=-38.58 Az status=0009 Ze status=0008 07:55:14 Check angles 07:55:14 SkyScan query 07:55:14 SkyScan query done: ret=0 az=47.16<-3144 ze=-38.52<-14568 Statuses=0009 0008 07:55:14 Msec=3750 True Az=47.16 Ze=-38.52 Az status=0009 Ze status=0008 07:55:14 Check angles 07:55:14 SkyScan query 07:55:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:55:15 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:55:15 Message to Master queued w/err=0: serial=135901 error=0 07:55:20 Received message from Master: op=Filter serial=135902 07:55:20 Color wheel filter change from 0 to 0 07:55:20 FLIGetFilterPos err=0 currentPosition=0 07:55:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:55:20 Filter is already there-color wheel unchanged 07:55:20 Received message from Master: op=Shutter serial=135903 07:55:20 Shutter LASER close 07:55:20 Received message from Camera: op=State serial=135905 07:55:20 GetSingleValue result=40 Value=cccccccc 07:55:20 SkyScan query 07:55:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:55:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:21 Parameters OK 07:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:21 Set A/D data flow result=40 07:55:21 Set A/D channel type result=40 07:55:21 Set A/D encoding result=40 07:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:21 Set channel filter=0.000000e+000 result=40 07:55:21 Config A/D Result=40 07:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:21 Get A/D filter: -9.255963e+061 result=40 07:55:21 Get A/D value=-858993460 result=40 07:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:21 Parameters OK 07:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:21 Set A/D data flow result=40 07:55:21 Set A/D channel type result=40 07:55:21 Set A/D encoding result=40 07:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:21 Set channel filter=0.000000e+000 result=40 07:55:21 Config A/D Result=40 07:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:21 Get A/D filter: -9.255963e+061 result=40 07:55:21 Get A/D value=-858993460 result=40 07:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:55:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:55:21 Aux= 07:55:21 Message to Camera, serial 135905 queued [UTC 2018-12-14 07:55:52] 07:55:57 Received message from Master: op=PointingHead serial=135918 07:55:57 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:55:57 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:55:58 Point started: ret=0 07:55:58 point_skyscan result=0 07:55:59 Check angles 07:55:59 SkyScan query 07:55:59 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.085<-16539 Statuses=0009 0009 07:55:59 Msec=0 True Az=63.99 Ze=-68.085 Az status=0009 Ze status=0009 07:55:59 Check angles 07:55:59 SkyScan query 07:56:00 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.04<-17936 Statuses=0009 0009 07:56:00 Msec=750 True Az=81.39 Ze=-89.04 Az status=0009 Ze status=0009 07:56:00 Check angles 07:56:00 SkyScan query 07:56:01 SkyScan query done: ret=0 az=98.82<-6588 ze=-109.98<-19332 Statuses=0009 0009 07:56:01 Msec=1500 True Az=98.82 Ze=-109.98 Az status=0009 Ze status=0009 07:56:01 Check angles 07:56:01 SkyScan query 07:56:01 SkyScan query done: ret=0 az=116.415<-7761 ze=-130.965<-20731 Statuses=0009 0009 07:56:01 Msec=2250 True Az=116.415 Ze=-130.965 Az status=0009 Ze status=0009 07:56:02 Check angles 07:56:02 SkyScan query 07:56:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 07:56:02 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 07:56:02 Check angles 07:56:02 SkyScan query 07:56:03 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:56:03 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:56:03 Message to Master queued w/err=0: serial=135918 error=0 07:56:08 Received message from Master: op=Filter serial=135919 07:56:08 Color wheel filter change from 0 to 0 07:56:08 FLIGetFilterPos err=0 currentPosition=0 07:56:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:08 Filter is already there-color wheel unchanged 07:56:08 Received message from Master: op=Shutter serial=135920 07:56:08 Shutter LASER close 07:56:08 Received message from Camera: op=State serial=135922 07:56:08 GetSingleValue result=40 Value=cccccccc 07:56:08 SkyScan query 07:56:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:56:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:09 Parameters OK 07:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:09 Set A/D data flow result=40 07:56:09 Set A/D channel type result=40 07:56:09 Set A/D encoding result=40 07:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:09 Set channel filter=0.000000e+000 result=40 07:56:09 Config A/D Result=40 07:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:09 Get A/D filter: -9.255963e+061 result=40 07:56:09 Get A/D value=-858993460 result=40 07:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:09 Parameters OK 07:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:09 Set A/D data flow result=40 07:56:09 Set A/D channel type result=40 07:56:09 Set A/D encoding result=40 07:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:09 Set channel filter=0.000000e+000 result=40 07:56:09 Config A/D Result=40 07:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:09 Get A/D filter: -9.255963e+061 result=40 07:56:09 Get A/D value=-858993460 result=40 07:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:09 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:09 Aux= 07:56:09 Message to Camera, serial 135922 queued 07:56:46 Received message from Master: op=PointingHead serial=135935 07:56:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:56:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:56:46 Point started: ret=0 07:56:46 point_skyscan result=0 07:56:47 Check angles 07:56:47 SkyScan query 07:56:47 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 07:56:47 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 07:56:47 Check angles 07:56:47 SkyScan query 07:56:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:56:48 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:56:48 Message to Master queued w/err=0: serial=135935 error=0 07:56:53 Received message from Master: op=Filter serial=135936 07:56:53 Color wheel filter change from 0 to 0 07:56:53 FLIGetFilterPos err=0 currentPosition=0 07:56:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:53 Filter is already there-color wheel unchanged 07:56:53 Received message from Master: op=Shutter serial=135937 07:56:53 Shutter LASER open 07:56:53 Received message from Camera: op=State serial=135939 07:56:53 GetSingleValue result=40 Value=cccccccc 07:56:53 SkyScan query 07:56:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:56:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:54 Parameters OK 07:56:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:54 Set A/D data flow result=40 07:56:54 Set A/D channel type result=40 07:56:54 Set A/D encoding result=40 07:56:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:54 Set channel filter=0.000000e+000 result=40 07:56:54 Config A/D Result=40 07:56:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:54 Get A/D filter: -9.255963e+061 result=40 07:56:54 Get A/D value=-858993460 result=40 07:56:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:54 Parameters OK 07:56:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:54 Set A/D data flow result=40 07:56:54 Set A/D channel type result=40 07:56:54 Set A/D encoding result=40 07:56:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:54 Set channel filter=0.000000e+000 result=40 07:56:54 Config A/D Result=40 07:56:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:54 Get A/D filter: -9.255963e+061 result=40 07:56:54 Get A/D value=-858993460 result=40 07:56:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:54 Aux= 07:56:54 Message to Camera, serial 135939 queued 07:57:02 Received message from Master: op=Shutter serial=135949 07:57:02 Shutter LASER close 07:57:03 Received message from Master: op=PointingHead serial=135953 07:57:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:57:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:57:03 Point started: ret=0 07:57:03 point_skyscan result=0 07:57:04 Check angles 07:57:04 SkyScan query 07:57:05 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.025<-21535 Statuses=0009 0009 07:57:05 Msec=0 True Az=136.17 Ze=-143.025 Az status=0009 Ze status=0009 07:57:05 Check angles 07:57:05 SkyScan query 07:57:05 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.04<-20136 Statuses=0009 0009 07:57:05 Msec=750 True Az=153.57 Ze=-122.04 Az status=0009 Ze status=0009 07:57:05 Check angles 07:57:05 SkyScan query 07:57:06 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.13<-18742 Statuses=0009 0009 07:57:06 Msec=1500 True Az=171.105 Ze=-101.13 Az status=0009 Ze status=0009 07:57:06 Check angles 07:57:06 SkyScan query 07:57:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.175<-17345 Statuses=0008 0009 07:57:07 Msec=2250 True Az=176.01 Ze=-80.175 Az status=0008 Ze status=0009 07:57:07 Check angles 07:57:07 SkyScan query 07:57:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.205<-15947 Statuses=0008 0009 07:57:08 Msec=3000 True Az=176.01 Ze=-59.205 Az status=0008 Ze status=0009 07:57:08 Check angles 07:57:08 SkyScan query 07:57:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 07:57:08 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 07:57:08 Message to Master queued w/err=0: serial=135953 error=0 07:57:13 Received message from Master: op=Filter serial=135954 07:57:13 Color wheel filter change from 0 to 0 07:57:13 FLIGetFilterPos err=0 currentPosition=0 07:57:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:13 Filter is already there-color wheel unchanged 07:57:13 Received message from Master: op=Shutter serial=135955 07:57:13 Shutter LASER close 07:57:14 Received message from Camera: op=State serial=135957 07:57:14 GetSingleValue result=40 Value=cccccccc 07:57:14 SkyScan query 07:57:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:57:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:14 Parameters OK 07:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:14 Set A/D data flow result=40 07:57:14 Set A/D channel type result=40 07:57:14 Set A/D encoding result=40 07:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:14 Set channel filter=0.000000e+000 result=40 07:57:14 Config A/D Result=40 07:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:14 Get A/D filter: -9.255963e+061 result=40 07:57:14 Get A/D value=-858993460 result=40 07:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:14 Parameters OK 07:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:14 Set A/D data flow result=40 07:57:14 Set A/D channel type result=40 07:57:14 Set A/D encoding result=40 07:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:14 Set channel filter=0.000000e+000 result=40 07:57:14 Config A/D Result=40 07:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:14 Get A/D filter: -9.255963e+061 result=40 07:57:14 Get A/D value=-858993460 result=40 07:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:14 Aux= 07:57:14 Message to Camera, serial 135957 queued 07:57:50 Received message from Master: op=PointingHead serial=135969 07:57:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:57:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:57:50 Point started: ret=0 07:57:50 point_skyscan result=0 07:57:51 Check angles 07:57:51 SkyScan query 07:57:52 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.78<-13452 Statuses=0009 0009 07:57:52 Msec=0 True Az=152.955 Ze=-21.78 Az status=0009 Ze status=0009 07:57:52 Check angles 07:57:52 SkyScan query 07:57:53 SkyScan query done: ret=0 az=135.54<-9036 ze=-0.765<-12051 Statuses=0009 0009 07:57:53 Msec=750 True Az=135.54 Ze=-0.765 Az status=0009 Ze status=0009 07:57:53 Check angles 07:57:53 SkyScan query 07:57:53 SkyScan query done: ret=0 az=118.035<-7869 ze=20.145<-10657 Statuses=0009 0009 07:57:53 Msec=1500 True Az=118.035 Ze=20.145 Az status=0009 Ze status=0009 07:57:53 Check angles 07:57:53 SkyScan query 07:57:54 SkyScan query done: ret=0 az=100.605<-6707 ze=41.16<-9256 Statuses=0009 0009 07:57:54 Msec=2250 True Az=100.605 Ze=41.16 Az status=0009 Ze status=0009 07:57:54 Check angles 07:57:54 SkyScan query 07:57:55 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 07:57:55 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 07:57:55 Check angles 07:57:55 SkyScan query 07:57:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:57:56 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:57:56 Message to Master queued w/err=0: serial=135969 error=0 07:58:01 Received message from Master: op=Filter serial=135970 07:58:01 Color wheel filter change from 0 to 0 07:58:01 FLIGetFilterPos err=0 currentPosition=0 07:58:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:01 Filter is already there-color wheel unchanged 07:58:01 Received message from Master: op=Shutter serial=135971 07:58:01 Shutter LASER close 07:58:01 Received message from Camera: op=State serial=135973 07:58:01 GetSingleValue result=40 Value=cccccccc 07:58:01 SkyScan query 07:58:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:58:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:01 Parameters OK 07:58:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:01 Set A/D data flow result=40 07:58:01 Set A/D channel type result=40 07:58:01 Set A/D encoding result=40 07:58:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:01 Set channel filter=0.000000e+000 result=40 07:58:01 Config A/D Result=40 07:58:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:01 Get A/D filter: -9.255963e+061 result=40 07:58:01 Get A/D value=-858993460 result=40 07:58:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:01 Parameters OK 07:58:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:01 Set A/D data flow result=40 07:58:01 Set A/D channel type result=40 07:58:01 Set A/D encoding result=40 07:58:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:01 Set channel filter=0.000000e+000 result=40 07:58:01 Config A/D Result=40 07:58:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:01 Get A/D filter: -9.255963e+061 result=40 07:58:01 Get A/D value=-858993460 result=40 07:58:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:01 Aux= 07:58:01 Message to Camera, serial 135973 queued 07:58:38 Received message from Master: op=PointingHead serial=135986 07:58:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:58:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:58:39 Point started: ret=0 07:58:39 point_skyscan result=0 07:58:39 Check angles 07:58:39 SkyScan query 07:58:40 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 07:58:40 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 07:58:40 Check angles 07:58:40 SkyScan query 07:58:41 SkyScan query done: ret=0 az=126.555<-8437 ze=38.505<-9433 Statuses=0009 0008 07:58:41 Msec=750 True Az=126.555 Ze=38.505 Az status=0009 Ze status=0008 07:58:41 Check angles 07:58:41 SkyScan query 07:58:41 SkyScan query done: ret=0 az=144<-9600 ze=38.505<-9433 Statuses=0009 0008 07:58:41 Msec=1500 True Az=144 Ze=38.505 Az status=0009 Ze status=0008 07:58:42 Check angles 07:58:42 SkyScan query 07:58:42 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 07:58:42 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 07:58:42 Check angles 07:58:42 SkyScan query 07:58:43 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:58:43 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:58:43 Check angles 07:58:43 SkyScan query 07:58:44 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:58:44 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:58:44 Message to Master queued w/err=0: serial=135986 error=0 07:58:49 Received message from Master: op=Filter serial=135987 07:58:49 Color wheel filter change from 0 to 0 07:58:49 FLIGetFilterPos err=0 currentPosition=0 07:58:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:49 Filter is already there-color wheel unchanged 07:58:49 Received message from Master: op=Shutter serial=135988 07:58:49 Shutter LASER close 07:58:49 Received message from Camera: op=State serial=135990 07:58:49 GetSingleValue result=40 Value=cccccccc 07:58:49 SkyScan query 07:58:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:58:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:49 Parameters OK 07:58:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:49 Set A/D data flow result=40 07:58:49 Set A/D channel type result=40 07:58:49 Set A/D encoding result=40 07:58:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:49 Set channel filter=0.000000e+000 result=40 07:58:49 Config A/D Result=40 07:58:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:49 Get A/D filter: -9.255963e+061 result=40 07:58:49 Get A/D value=-858993460 result=40 07:58:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:49 Parameters OK 07:58:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:49 Set A/D data flow result=40 07:58:49 Set A/D channel type result=40 07:58:49 Set A/D encoding result=40 07:58:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:49 Set channel filter=0.000000e+000 result=40 07:58:49 Config A/D Result=40 07:58:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:49 Get A/D filter: -9.255963e+061 result=40 07:58:49 Get A/D value=-858993460 result=40 07:58:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:49 Aux= 07:58:49 Message to Camera, serial 135990 queued 07:59:26 Received message from Master: op=PointingHead serial=136003 07:59:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:59:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:59:27 Point started: ret=0 07:59:27 point_skyscan result=0 07:59:27 Check angles 07:59:27 SkyScan query 07:59:28 SkyScan query done: ret=0 az=152.73<-10182 ze=8.385<-11441 Statuses=0009 0009 07:59:28 Msec=0 True Az=152.73 Ze=8.385 Az status=0009 Ze status=0009 07:59:28 Check angles 07:59:28 SkyScan query 07:59:29 SkyScan query done: ret=0 az=135.27<-9018 ze=-12.51<-12834 Statuses=0009 0009 07:59:29 Msec=750 True Az=135.27 Ze=-12.51 Az status=0009 Ze status=0009 07:59:29 Check angles 07:59:29 SkyScan query 07:59:29 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.495<-14233 Statuses=0009 0009 07:59:29 Msec=1500 True Az=117.765 Ze=-33.495 Az status=0009 Ze status=0009 07:59:30 Check angles 07:59:30 SkyScan query 07:59:30 SkyScan query done: ret=0 az=100.35<-6690 ze=-51.555<-15437 Statuses=0009 0009 07:59:30 Msec=2250 True Az=100.35 Ze=-51.555 Az status=0009 Ze status=0009 07:59:30 Check angles 07:59:30 SkyScan query 07:59:31 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:59:31 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:59:31 Check angles 07:59:31 SkyScan query 07:59:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:59:32 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:59:32 Message to Master queued w/err=0: serial=136003 error=0 07:59:37 Received message from Master: op=Filter serial=136004 07:59:37 Color wheel filter change from 0 to 0 07:59:37 FLIGetFilterPos err=0 currentPosition=0 07:59:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:37 Filter is already there-color wheel unchanged 07:59:37 Received message from Master: op=Shutter serial=136005 07:59:37 Shutter LASER close 07:59:37 Received message from Camera: op=State serial=136007 07:59:37 GetSingleValue result=40 Value=cccccccc 07:59:37 SkyScan query 07:59:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:59:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:38 Parameters OK 07:59:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:38 Set A/D data flow result=40 07:59:38 Set A/D channel type result=40 07:59:38 Set A/D encoding result=40 07:59:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:38 Set channel filter=0.000000e+000 result=40 07:59:38 Config A/D Result=40 07:59:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:38 Get A/D filter: -9.255963e+061 result=40 07:59:38 Get A/D value=-858993460 result=40 07:59:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:38 Parameters OK 07:59:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:38 Set A/D data flow result=40 07:59:38 Set A/D channel type result=40 07:59:38 Set A/D encoding result=40 07:59:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:38 Set channel filter=0.000000e+000 result=40 07:59:38 Config A/D Result=40 07:59:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:38 Get A/D filter: -9.255963e+061 result=40 07:59:38 Get A/D value=-858993460 result=40 07:59:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:38 Aux= 07:59:38 Message to Camera, serial 136007 queued 08:00:14 Received message from Master: op=PointingHead serial=136020 08:00:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:00:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:00:15 Point started: ret=0 08:00:15 point_skyscan result=0 08:00:15 Check angles 08:00:15 SkyScan query 08:00:16 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.09<-17406 Statuses=0009 0009 08:00:16 Msec=0 True Az=108.795 Ze=-81.09 Az status=0009 Ze status=0009 08:00:16 Check angles 08:00:16 SkyScan query 08:00:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.09<-18806 Statuses=0008 0009 08:00:17 Msec=750 True Az=112.995 Ze=-102.09 Az status=0008 Ze status=0009 08:00:17 Check angles 08:00:17 SkyScan query 08:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.015<-20201 Statuses=0008 0009 08:00:18 Msec=1500 True Az=112.995 Ze=-123.015 Az status=0008 Ze status=0009 08:00:18 Check angles 08:00:18 SkyScan query 08:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-144<-21600 Statuses=0008 0009 08:00:18 Msec=2250 True Az=112.995 Ze=-144 Az status=0008 Ze status=0009 08:00:18 Check angles 08:00:18 SkyScan query 08:00:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.925<-22995 Statuses=0008 0009 08:00:19 Msec=3000 True Az=112.995 Ze=-164.925 Az status=0008 Ze status=0009 08:00:19 Check angles 08:00:19 SkyScan query 08:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 08:00:20 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 08:00:20 Message to Master queued w/err=0: serial=136020 error=0 08:00:25 Received message from Master: op=Filter serial=136021 08:00:25 Color wheel filter change from 0 to 0 08:00:25 FLIGetFilterPos err=0 currentPosition=0 08:00:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:25 Filter is already there-color wheel unchanged 08:00:25 Received message from Master: op=Shutter serial=136022 08:00:25 Shutter LASER open 08:00:25 Received message from Camera: op=State serial=136024 08:00:25 GetSingleValue result=40 Value=cccccccc 08:00:25 SkyScan query 08:00:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:00:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:26 Parameters OK 08:00:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:26 Set A/D data flow result=40 08:00:26 Set A/D channel type result=40 08:00:26 Set A/D encoding result=40 08:00:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:26 Set channel filter=0.000000e+000 result=40 08:00:26 Config A/D Result=40 08:00:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:26 Get A/D filter: -9.255963e+061 result=40 08:00:26 Get A/D value=-858993460 result=40 08:00:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:26 Parameters OK 08:00:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:26 Set A/D data flow result=40 08:00:26 Set A/D channel type result=40 08:00:26 Set A/D encoding result=40 08:00:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:26 Set channel filter=0.000000e+000 result=40 08:00:26 Config A/D Result=40 08:00:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:26 Get A/D filter: -9.255963e+061 result=40 08:00:26 Get A/D value=-858993460 result=40 08:00:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:26 Aux= 08:00:26 Message to Camera, serial 136024 queued 08:00:34 Received message from Master: op=Shutter serial=136034 08:00:34 Shutter LASER close 08:00:35 Received message from Master: op=PointingHead serial=136038 08:00:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:00:35 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:00:35 Point started: ret=0 08:00:35 point_skyscan result=0 08:00:36 Check angles 08:00:36 SkyScan query 08:00:36 SkyScan query done: ret=0 az=89.625<-5975 ze=157.005<-1533 Statuses=0009 0009 08:00:36 Msec=0 True Az=89.625 Ze=157.005 Az status=0009 Ze status=0009 08:00:36 Check angles 08:00:36 SkyScan query 08:00:37 SkyScan query done: ret=0 az=72.225<-4815 ze=136.065<-2929 Statuses=0009 0009 08:00:37 Msec=750 True Az=72.225 Ze=136.065 Az status=0009 Ze status=0009 08:00:37 Check angles 08:00:37 SkyScan query 08:00:38 SkyScan query done: ret=0 az=54.795<-3653 ze=115.11<-4326 Statuses=0009 0009 08:00:38 Msec=1500 True Az=54.795 Ze=115.11 Az status=0009 Ze status=0009 08:00:38 Check angles 08:00:38 SkyScan query 08:00:38 SkyScan query done: ret=0 az=40.98<-2732 ze=94.125<-5725 Statuses=0009 0009 08:00:38 Msec=2250 True Az=40.98 Ze=94.125 Az status=0009 Ze status=0009 08:00:39 Check angles 08:00:39 SkyScan query 08:00:39 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 08:00:39 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 08:00:39 Check angles 08:00:39 SkyScan query 08:00:40 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 08:00:40 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 08:00:40 Check angles 08:00:40 SkyScan query 08:00:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:00:41 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:00:41 Message to Master queued w/err=0: serial=136038 error=0 08:00:46 Received message from Master: op=Filter serial=136039 08:00:46 Color wheel filter change from 0 to 0 08:00:46 FLIGetFilterPos err=0 currentPosition=0 08:00:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:46 Filter is already there-color wheel unchanged 08:00:46 Received message from Master: op=Shutter serial=136040 08:00:46 Shutter LASER close 08:00:46 Received message from Camera: op=State serial=136042 08:00:46 GetSingleValue result=40 Value=cccccccc 08:00:46 SkyScan query 08:00:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:00:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:47 Parameters OK 08:00:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:47 Set A/D data flow result=40 08:00:47 Set A/D channel type result=40 08:00:47 Set A/D encoding result=40 08:00:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:47 Set channel filter=0.000000e+000 result=40 08:00:47 Config A/D Result=40 08:00:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:47 Get A/D filter: -9.255963e+061 result=40 08:00:47 Get A/D value=-858993460 result=40 08:00:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:47 Parameters OK 08:00:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:47 Set A/D data flow result=40 08:00:47 Set A/D channel type result=40 08:00:47 Set A/D encoding result=40 08:00:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:47 Set channel filter=0.000000e+000 result=40 08:00:47 Config A/D Result=40 08:00:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:47 Get A/D filter: -9.255963e+061 result=40 08:00:47 Get A/D value=-858993460 result=40 08:00:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:47 Aux= 08:00:47 Message to Camera, serial 136042 queued 08:01:23 Received message from Master: op=PointingHead serial=136055 08:01:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:01:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:01:24 Point started: ret=0 08:01:24 point_skyscan result=0 08:01:25 Check angles 08:01:25 SkyScan query 08:01:25 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 08:01:25 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 08:01:25 Check angles 08:01:25 SkyScan query 08:01:26 SkyScan query done: ret=0 az=81.825<-5455 ze=66.51<-7566 Statuses=0009 0008 08:01:26 Msec=750 True Az=81.825 Ze=66.51 Az status=0009 Ze status=0008 08:01:26 Check angles 08:01:26 SkyScan query 08:01:27 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 08:01:27 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 08:01:27 Check angles 08:01:27 SkyScan query 08:01:27 SkyScan query done: ret=0 az=116.79<-7786 ze=66.495<-7567 Statuses=0009 0008 08:01:27 Msec=2250 True Az=116.79 Ze=66.495 Az status=0009 Ze status=0008 08:01:28 Check angles 08:01:28 SkyScan query 08:01:28 SkyScan query done: ret=0 az=134.67<-8978 ze=66.495<-7567 Statuses=0009 0008 08:01:28 Msec=3000 True Az=134.67 Ze=66.495 Az status=0009 Ze status=0008 08:01:28 Check angles 08:01:28 SkyScan query 08:01:29 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 08:01:29 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 08:01:29 Check angles 08:01:29 SkyScan query 08:01:30 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:01:30 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:01:30 Message to Master queued w/err=0: serial=136055 error=0 08:01:35 Received message from Master: op=Filter serial=136056 08:01:35 Color wheel filter change from 0 to 0 08:01:35 FLIGetFilterPos err=0 currentPosition=0 08:01:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:35 Filter is already there-color wheel unchanged 08:01:35 Received message from Master: op=Shutter serial=136057 08:01:35 Shutter LASER close 08:01:35 Received message from Camera: op=State serial=136059 08:01:35 GetSingleValue result=40 Value=cccccccc 08:01:35 SkyScan query 08:01:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:01:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:35 Parameters OK 08:01:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:35 Set A/D data flow result=40 08:01:35 Set A/D channel type result=40 08:01:35 Set A/D encoding result=40 08:01:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:35 Set channel filter=0.000000e+000 result=40 08:01:35 Config A/D Result=40 08:01:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:35 Get A/D filter: -9.255963e+061 result=40 08:01:35 Get A/D value=-858993460 result=40 08:01:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:35 Parameters OK 08:01:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:35 Set A/D data flow result=40 08:01:35 Set A/D channel type result=40 08:01:35 Set A/D encoding result=40 08:01:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:35 Set channel filter=0.000000e+000 result=40 08:01:35 Config A/D Result=40 08:01:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:35 Get A/D filter: -9.255963e+061 result=40 08:01:35 Get A/D value=-858993460 result=40 08:01:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:35 Aux= 08:01:35 Message to Camera, serial 136059 queued 08:02:12 Received message from Master: op=PointingHead serial=136072 08:02:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:02:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:02:13 Point started: ret=0 08:02:13 point_skyscan result=0 08:02:13 Check angles 08:02:13 SkyScan query 08:02:14 SkyScan query done: ret=0 az=135.105<-9007 ze=36.81<-9546 Statuses=0009 0009 08:02:14 Msec=0 True Az=135.105 Ze=36.81 Az status=0009 Ze status=0009 08:02:14 Check angles 08:02:14 SkyScan query 08:02:15 SkyScan query done: ret=0 az=117.12<-7808 ze=15.465<-10969 Statuses=0009 0009 08:02:15 Msec=750 True Az=117.12 Ze=15.465 Az status=0009 Ze status=0009 08:02:15 Check angles 08:02:15 SkyScan query 08:02:16 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.535<-12369 Statuses=0009 0009 08:02:16 Msec=1500 True Az=99.885 Ze=-5.535 Az status=0009 Ze status=0009 08:02:16 Check angles 08:02:16 SkyScan query 08:02:16 SkyScan query done: ret=0 az=82.29<-5486 ze=-26.505<-13767 Statuses=0009 0009 08:02:16 Msec=2250 True Az=82.29 Ze=-26.505 Az status=0009 Ze status=0009 08:02:16 Check angles 08:02:16 SkyScan query 08:02:17 SkyScan query done: ret=0 az=64.74<-4316 ze=-38.58<-14572 Statuses=0009 0008 08:02:17 Msec=3000 True Az=64.74 Ze=-38.58 Az status=0009 Ze status=0008 08:02:17 Check angles 08:02:17 SkyScan query 08:02:18 SkyScan query done: ret=0 az=47.34<-3156 ze=-38.52<-14568 Statuses=0009 0008 08:02:18 Msec=3750 True Az=47.34 Ze=-38.52 Az status=0009 Ze status=0008 08:02:18 Check angles 08:02:18 SkyScan query 08:02:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:02:19 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:02:19 Message to Master queued w/err=0: serial=136072 error=0 08:02:24 Received message from Master: op=Filter serial=136073 08:02:24 Color wheel filter change from 0 to 0 08:02:24 FLIGetFilterPos err=0 currentPosition=0 08:02:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:24 Filter is already there-color wheel unchanged 08:02:24 Received message from Master: op=Shutter serial=136074 08:02:24 Shutter LASER close 08:02:24 Received message from Camera: op=State serial=136076 08:02:24 GetSingleValue result=40 Value=cccccccc 08:02:24 SkyScan query 08:02:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:02:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:24 Parameters OK 08:02:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:24 Set A/D data flow result=40 08:02:24 Set A/D channel type result=40 08:02:24 Set A/D encoding result=40 08:02:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:24 Set channel filter=0.000000e+000 result=40 08:02:24 Config A/D Result=40 08:02:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:24 Get A/D filter: -9.255963e+061 result=40 08:02:24 Get A/D value=-858993460 result=40 08:02:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:24 Parameters OK 08:02:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:24 Set A/D data flow result=40 08:02:24 Set A/D channel type result=40 08:02:24 Set A/D encoding result=40 08:02:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:24 Set channel filter=0.000000e+000 result=40 08:02:24 Config A/D Result=40 08:02:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:24 Get A/D filter: -9.255963e+061 result=40 08:02:24 Get A/D value=-858993460 result=40 08:02:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:24 Aux= 08:02:24 Message to Camera, serial 136076 queued 08:03:00 Received message from Master: op=PointingHead serial=136088 08:03:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:03:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:03:01 Point started: ret=0 08:03:01 point_skyscan result=0 08:03:01 Check angles 08:03:01 SkyScan query 08:03:02 SkyScan query done: ret=0 az=64.395<-4293 ze=-68.79<-16586 Statuses=0009 0009 08:03:02 Msec=0 True Az=64.395 Ze=-68.79 Az status=0009 Ze status=0009 08:03:02 Check angles 08:03:02 SkyScan query 08:03:03 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.73<-17982 Statuses=0009 0009 08:03:03 Msec=750 True Az=81.885 Ze=-89.73 Az status=0009 Ze status=0009 08:03:03 Check angles 08:03:03 SkyScan query 08:03:03 SkyScan query done: ret=0 az=99.66<-6644 ze=-111.105<-19407 Statuses=0009 0009 08:03:03 Msec=1500 True Az=99.66 Ze=-111.105 Az status=0009 Ze status=0009 08:03:04 Check angles 08:03:04 SkyScan query 08:03:04 SkyScan query done: ret=0 az=117.165<-7811 ze=-132.045<-20803 Statuses=0009 0009 08:03:04 Msec=2250 True Az=117.165 Ze=-132.045 Az status=0009 Ze status=0009 08:03:04 Check angles 08:03:04 SkyScan query 08:03:05 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 08:03:05 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 08:03:05 Check angles 08:03:05 SkyScan query 08:03:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 08:03:06 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 08:03:06 Message to Master queued w/err=0: serial=136088 error=0 08:03:11 Received message from Master: op=Filter serial=136089 08:03:11 Color wheel filter change from 0 to 0 08:03:11 FLIGetFilterPos err=0 currentPosition=0 08:03:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:11 Filter is already there-color wheel unchanged 08:03:11 Received message from Master: op=Shutter serial=136090 08:03:11 Shutter LASER close 08:03:11 Received message from Camera: op=State serial=136092 08:03:11 GetSingleValue result=40 Value=cccccccc 08:03:11 SkyScan query 08:03:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:03:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:11 Parameters OK 08:03:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:11 Set A/D data flow result=40 08:03:11 Set A/D channel type result=40 08:03:11 Set A/D encoding result=40 08:03:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:11 Set channel filter=0.000000e+000 result=40 08:03:11 Config A/D Result=40 08:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:11 Get A/D filter: -9.255963e+061 result=40 08:03:11 Get A/D value=-858993460 result=40 08:03:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:11 Parameters OK 08:03:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:11 Set A/D data flow result=40 08:03:11 Set A/D channel type result=40 08:03:11 Set A/D encoding result=40 08:03:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:11 Set channel filter=0.000000e+000 result=40 08:03:11 Config A/D Result=40 08:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:11 Get A/D filter: -9.255963e+061 result=40 08:03:11 Get A/D value=-858993460 result=40 08:03:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:11 Aux= 08:03:11 Message to Camera, serial 136092 queued 08:03:48 Received message from Master: op=PointingHead serial=136105 08:03:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:03:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:03:49 Point started: ret=0 08:03:49 point_skyscan result=0 08:03:50 Check angles 08:03:50 SkyScan query 08:03:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 08:03:50 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 08:03:50 Check angles 08:03:50 SkyScan query 08:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:03:51 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:03:51 Message to Master queued w/err=0: serial=136105 error=0 08:03:56 Received message from Master: op=Filter serial=136106 08:03:56 Color wheel filter change from 0 to 0 08:03:56 FLIGetFilterPos err=0 currentPosition=0 08:03:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:56 Filter is already there-color wheel unchanged 08:03:56 Received message from Master: op=Shutter serial=136107 08:03:56 Shutter LASER open 08:03:56 Received message from Camera: op=State serial=136109 08:03:56 GetSingleValue result=40 Value=cccccccc 08:03:56 SkyScan query 08:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:03:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:57 Parameters OK 08:03:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:57 Set A/D data flow result=40 08:03:57 Set A/D channel type result=40 08:03:57 Set A/D encoding result=40 08:03:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:57 Set channel filter=0.000000e+000 result=40 08:03:57 Config A/D Result=40 08:03:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:57 Get A/D filter: -9.255963e+061 result=40 08:03:57 Get A/D value=-858993460 result=40 08:03:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:57 Parameters OK 08:03:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:57 Set A/D data flow result=40 08:03:57 Set A/D channel type result=40 08:03:57 Set A/D encoding result=40 08:03:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:57 Set channel filter=0.000000e+000 result=40 08:03:57 Config A/D Result=40 08:03:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:57 Get A/D filter: -9.255963e+061 result=40 08:03:57 Get A/D value=-858993460 result=40 08:03:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:57 Aux= 08:03:57 Message to Camera, serial 136109 queued 08:04:05 Received message from Master: op=Shutter serial=136119 08:04:05 Shutter LASER close 08:04:06 Received message from Master: op=PointingHead serial=136123 08:04:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:04:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:04:07 Point started: ret=0 08:04:07 point_skyscan result=0 08:04:07 Check angles 08:04:07 SkyScan query 08:04:08 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.83<-21522 Statuses=0009 0009 08:04:08 Msec=0 True Az=136.395 Ze=-142.83 Az status=0009 Ze status=0009 08:04:08 Check angles 08:04:08 SkyScan query 08:04:09 SkyScan query done: ret=0 az=153.84<-10256 ze=-121.845<-20123 Statuses=0009 0009 08:04:09 Msec=750 True Az=153.84 Ze=-121.845 Az status=0009 Ze status=0009 08:04:09 Check angles 08:04:09 SkyScan query 08:04:09 SkyScan query done: ret=0 az=171.345<-11423 ze=-100.905<-18727 Statuses=0009 0009 08:04:09 Msec=1500 True Az=171.345 Ze=-100.905 Az status=0009 Ze status=0009 08:04:10 Check angles 08:04:10 SkyScan query 08:04:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.98<-17332 Statuses=0008 0009 08:04:10 Msec=2250 True Az=176.01 Ze=-79.98 Az status=0008 Ze status=0009 08:04:10 Check angles 08:04:10 SkyScan query 08:04:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.545<-15903 Statuses=0008 0009 08:04:11 Msec=3000 True Az=176.01 Ze=-58.545 Az status=0008 Ze status=0009 08:04:11 Check angles 08:04:11 SkyScan query 08:04:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:04:12 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:04:12 Message to Master queued w/err=0: serial=136123 error=0 08:04:17 Received message from Master: op=Filter serial=136124 08:04:17 Color wheel filter change from 0 to 0 08:04:17 FLIGetFilterPos err=0 currentPosition=0 08:04:17 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:17 Filter is already there-color wheel unchanged 08:04:17 Received message from Master: op=Shutter serial=136125 08:04:17 Shutter LASER close 08:04:17 Received message from Camera: op=State serial=136127 08:04:17 GetSingleValue result=40 Value=cccccccc 08:04:17 SkyScan query 08:04:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:04:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:18 Parameters OK 08:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:18 Set A/D data flow result=40 08:04:18 Set A/D channel type result=40 08:04:18 Set A/D encoding result=40 08:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:18 Set channel filter=0.000000e+000 result=40 08:04:18 Config A/D Result=40 08:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:18 Get A/D filter: -9.255963e+061 result=40 08:04:18 Get A/D value=-858993460 result=40 08:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:18 Parameters OK 08:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:18 Set A/D data flow result=40 08:04:18 Set A/D channel type result=40 08:04:18 Set A/D encoding result=40 08:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:18 Set channel filter=0.000000e+000 result=40 08:04:18 Config A/D Result=40 08:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:18 Get A/D filter: -9.255963e+061 result=40 08:04:18 Get A/D value=-858993460 result=40 08:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:18 Aux= 08:04:18 Message to Camera, serial 136127 queued 08:04:54 Received message from Master: op=PointingHead serial=136140 08:04:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:04:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:04:55 Point started: ret=0 08:04:55 point_skyscan result=0 08:04:55 Check angles 08:04:55 SkyScan query 08:04:56 SkyScan query done: ret=0 az=153.21<-10214 ze=-21.93<-13462 Statuses=0009 0009 08:04:56 Msec=0 True Az=153.21 Ze=-21.93 Az status=0009 Ze status=0009 08:04:56 Check angles 08:04:56 SkyScan query 08:04:57 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.51<-12034 Statuses=0009 0009 08:04:57 Msec=750 True Az=135.345 Ze=-0.51 Az status=0009 Ze status=0009 08:04:57 Check angles 08:04:57 SkyScan query 08:04:58 SkyScan query done: ret=0 az=117.48<-7832 ze=20.895<-10607 Statuses=0009 0009 08:04:58 Msec=1500 True Az=117.48 Ze=20.895 Az status=0009 Ze status=0009 08:04:58 Check angles 08:04:58 SkyScan query 08:04:58 SkyScan query done: ret=0 az=100.065<-6671 ze=41.82<-9212 Statuses=0009 0009 08:04:58 Msec=2250 True Az=100.065 Ze=41.82 Az status=0009 Ze status=0009 08:04:58 Check angles 08:04:58 SkyScan query 08:04:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 08:04:59 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 08:04:59 Check angles 08:04:59 SkyScan query 08:05:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:05:00 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:05:00 Message to Master queued w/err=0: serial=136140 error=0 08:05:05 Received message from Master: op=Filter serial=136141 08:05:05 Color wheel filter change from 0 to 0 08:05:05 FLIGetFilterPos err=0 currentPosition=0 08:05:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:05 Filter is already there-color wheel unchanged 08:05:05 Received message from Master: op=Shutter serial=136142 08:05:05 Shutter LASER close 08:05:05 Received message from Camera: op=State serial=136144 08:05:05 GetSingleValue result=40 Value=cccccccc 08:05:05 SkyScan query 08:05:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:05:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:06 Parameters OK 08:05:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:06 Set A/D data flow result=40 08:05:06 Set A/D channel type result=40 08:05:06 Set A/D encoding result=40 08:05:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:06 Set channel filter=0.000000e+000 result=40 08:05:06 Config A/D Result=40 08:05:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:06 Get A/D filter: -9.255963e+061 result=40 08:05:06 Get A/D value=-858993460 result=40 08:05:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:06 Parameters OK 08:05:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:06 Set A/D data flow result=40 08:05:06 Set A/D channel type result=40 08:05:06 Set A/D encoding result=40 08:05:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:06 Set channel filter=0.000000e+000 result=40 08:05:06 Config A/D Result=40 08:05:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:06 Get A/D filter: -9.255963e+061 result=40 08:05:06 Get A/D value=-858993460 result=40 08:05:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:06 Aux= 08:05:06 Message to Camera, serial 136144 queued 08:05:42 Received message from Master: op=PointingHead serial=136157 08:05:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:05:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:05:43 Point started: ret=0 08:05:43 point_skyscan result=0 08:05:44 Check angles 08:05:44 SkyScan query 08:05:44 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 08:05:44 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 08:05:44 Check angles 08:05:44 SkyScan query 08:05:45 SkyScan query done: ret=0 az=126.945<-8463 ze=38.505<-9433 Statuses=0009 0008 08:05:45 Msec=750 True Az=126.945 Ze=38.505 Az status=0009 Ze status=0008 08:05:45 Check angles 08:05:45 SkyScan query 08:05:46 SkyScan query done: ret=0 az=144.825<-9655 ze=38.505<-9433 Statuses=0009 0008 08:05:46 Msec=1500 True Az=144.825 Ze=38.505 Az status=0009 Ze status=0008 08:05:46 Check angles 08:05:46 SkyScan query [UTC 2018-12-14 08:05:46] 08:05:46 SkyScan query done: ret=0 az=162.405<-10827 ze=38.505<-9433 Statuses=0009 0008 08:05:46 Msec=2250 True Az=162.405 Ze=38.505 Az status=0009 Ze status=0008 08:05:47 Check angles 08:05:47 SkyScan query 08:05:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 08:05:47 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 08:05:47 Check angles 08:05:47 SkyScan query 08:05:48 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:05:48 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:05:48 Message to Master queued w/err=0: serial=136157 error=0 08:05:53 Received message from Master: op=Filter serial=136158 08:05:53 Color wheel filter change from 0 to 0 08:05:53 FLIGetFilterPos err=0 currentPosition=0 08:05:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:53 Filter is already there-color wheel unchanged 08:05:53 Received message from Master: op=Shutter serial=136159 08:05:53 Shutter LASER close 08:05:53 Received message from Camera: op=State serial=136161 08:05:53 GetSingleValue result=40 Value=cccccccc 08:05:53 SkyScan query 08:05:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:05:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:54 Parameters OK 08:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:54 Set A/D data flow result=40 08:05:54 Set A/D channel type result=40 08:05:54 Set A/D encoding result=40 08:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:54 Set channel filter=0.000000e+000 result=40 08:05:54 Config A/D Result=40 08:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:54 Get A/D filter: -9.255963e+061 result=40 08:05:54 Get A/D value=-858993460 result=40 08:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:54 Parameters OK 08:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:54 Set A/D data flow result=40 08:05:54 Set A/D channel type result=40 08:05:54 Set A/D encoding result=40 08:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:54 Set channel filter=0.000000e+000 result=40 08:05:54 Config A/D Result=40 08:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:54 Get A/D filter: -9.255963e+061 result=40 08:05:54 Get A/D value=-858993460 result=40 08:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:54 Aux= 08:05:54 Message to Camera, serial 136161 queued 08:06:31 Received message from Master: op=PointingHead serial=136174 08:06:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:06:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:06:31 Point started: ret=0 08:06:31 point_skyscan result=0 08:06:32 Check angles 08:06:32 SkyScan query 08:06:32 SkyScan query done: ret=0 az=152.94<-10196 ze=8.7<-11420 Statuses=0009 0009 08:06:32 Msec=0 True Az=152.94 Ze=8.7 Az status=0009 Ze status=0009 08:06:32 Check angles 08:06:32 SkyScan query 08:06:33 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.27<-12818 Statuses=0009 0009 08:06:33 Msec=750 True Az=135.33 Ze=-12.27 Az status=0009 Ze status=0009 08:06:33 Check angles 08:06:33 SkyScan query 08:06:34 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.21<-14214 Statuses=0009 0009 08:06:34 Msec=1500 True Az=117.93 Ze=-33.21 Az status=0009 Ze status=0009 08:06:34 Check angles 08:06:34 SkyScan query 08:06:35 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.54<-15436 Statuses=0009 0009 08:06:35 Msec=2250 True Az=100.425 Ze=-51.54 Az status=0009 Ze status=0009 08:06:35 Check angles 08:06:35 SkyScan query 08:06:35 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 08:06:35 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 08:06:35 Check angles 08:06:35 SkyScan query 08:06:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:06:36 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:06:36 Message to Master queued w/err=0: serial=136174 error=0 08:06:41 Received message from Master: op=Filter serial=136175 08:06:41 Color wheel filter change from 0 to 0 08:06:41 FLIGetFilterPos err=0 currentPosition=0 08:06:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:41 Filter is already there-color wheel unchanged 08:06:41 Received message from Master: op=Shutter serial=136176 08:06:41 Shutter LASER close 08:06:41 Received message from Camera: op=State serial=136178 08:06:41 GetSingleValue result=40 Value=cccccccc 08:06:41 SkyScan query 08:06:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:06:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:42 Parameters OK 08:06:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:42 Set A/D data flow result=40 08:06:42 Set A/D channel type result=40 08:06:42 Set A/D encoding result=40 08:06:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:42 Set channel filter=0.000000e+000 result=40 08:06:42 Config A/D Result=40 08:06:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:42 Get A/D filter: -9.255963e+061 result=40 08:06:42 Get A/D value=-858993460 result=40 08:06:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:42 Parameters OK 08:06:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:42 Set A/D data flow result=40 08:06:42 Set A/D channel type result=40 08:06:42 Set A/D encoding result=40 08:06:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:42 Set channel filter=0.000000e+000 result=40 08:06:42 Config A/D Result=40 08:06:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:42 Get A/D filter: -9.255963e+061 result=40 08:06:42 Get A/D value=-858993460 result=40 08:06:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:42 Aux= 08:06:42 Message to Camera, serial 136178 queued 08:07:18 Received message from Master: op=PointingHead serial=136190 08:07:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:07:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:07:18 Point started: ret=0 08:07:18 point_skyscan result=0 08:07:19 Check angles 08:07:19 SkyScan query 08:07:19 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.3<-17420 Statuses=0009 0009 08:07:19 Msec=0 True Az=109.005 Ze=-81.3 Az status=0009 Ze status=0009 08:07:20 Check angles 08:07:20 SkyScan query 08:07:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 08:07:20 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 08:07:20 Check angles 08:07:20 SkyScan query 08:07:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 08:07:21 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 08:07:21 Check angles 08:07:21 SkyScan query 08:07:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.585<-21639 Statuses=0008 0009 08:07:22 Msec=2250 True Az=112.995 Ze=-144.585 Az status=0008 Ze status=0009 08:07:22 Check angles 08:07:22 SkyScan query 08:07:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.525<-23035 Statuses=0008 0009 08:07:23 Msec=3000 True Az=112.995 Ze=-165.525 Az status=0008 Ze status=0009 08:07:23 Check angles 08:07:23 SkyScan query 08:07:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:07:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:07:23 Message to Master queued w/err=0: serial=136190 error=0 08:07:28 Received message from Master: op=Filter serial=136191 08:07:28 Color wheel filter change from 0 to 0 08:07:28 FLIGetFilterPos err=0 currentPosition=0 08:07:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:28 Filter is already there-color wheel unchanged 08:07:28 Received message from Master: op=Shutter serial=136192 08:07:28 Shutter LASER open 08:07:29 Received message from Camera: op=State serial=136194 08:07:29 GetSingleValue result=40 Value=cccccccc 08:07:29 SkyScan query 08:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:07:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:29 Parameters OK 08:07:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:29 Set A/D data flow result=40 08:07:29 Set A/D channel type result=40 08:07:29 Set A/D encoding result=40 08:07:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:29 Set channel filter=0.000000e+000 result=40 08:07:29 Config A/D Result=40 08:07:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:29 Get A/D filter: -9.255963e+061 result=40 08:07:29 Get A/D value=-858993460 result=40 08:07:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:29 Parameters OK 08:07:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:29 Set A/D data flow result=40 08:07:29 Set A/D channel type result=40 08:07:29 Set A/D encoding result=40 08:07:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:29 Set channel filter=0.000000e+000 result=40 08:07:29 Config A/D Result=40 08:07:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:29 Get A/D filter: -9.255963e+061 result=40 08:07:29 Get A/D value=-858993460 result=40 08:07:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:29 Aux= 08:07:29 Message to Camera, serial 136194 queued 08:07:38 Received message from Master: op=Shutter serial=136204 08:07:38 Shutter LASER close 08:07:38 Received message from Master: op=PointingHead serial=136208 08:07:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:07:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:07:38 Point started: ret=0 08:07:38 point_skyscan result=0 08:07:39 Check angles 08:07:39 SkyScan query 08:07:40 SkyScan query done: ret=0 az=89.58<-5972 ze=156.84<-1544 Statuses=0009 0009 08:07:40 Msec=0 True Az=89.58 Ze=156.84 Az status=0009 Ze status=0009 08:07:40 Check angles 08:07:40 SkyScan query 08:07:40 SkyScan query done: ret=0 az=72.06<-4804 ze=135.885<-2941 Statuses=0009 0009 08:07:40 Msec=750 True Az=72.06 Ze=135.885 Az status=0009 Ze status=0009 08:07:41 Check angles 08:07:41 SkyScan query 08:07:41 SkyScan query done: ret=0 az=54.57<-3638 ze=114.915<-4339 Statuses=0009 0009 08:07:41 Msec=1500 True Az=54.57 Ze=114.915 Az status=0009 Ze status=0009 08:07:41 Check angles 08:07:41 SkyScan query 08:07:42 SkyScan query done: ret=0 az=40.98<-2732 ze=93.96<-5736 Statuses=0009 0009 08:07:42 Msec=2250 True Az=40.98 Ze=93.96 Az status=0009 Ze status=0009 08:07:42 Check angles 08:07:42 SkyScan query 08:07:43 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 08:07:43 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 08:07:43 Check angles 08:07:43 SkyScan query 08:07:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 08:07:43 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 08:07:44 Check angles 08:07:44 SkyScan query 08:07:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:07:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:07:44 Message to Master queued w/err=0: serial=136208 error=0 08:07:49 Received message from Master: op=Filter serial=136209 08:07:49 Color wheel filter change from 0 to 0 08:07:49 FLIGetFilterPos err=0 currentPosition=0 08:07:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:49 Filter is already there-color wheel unchanged 08:07:49 Received message from Master: op=Shutter serial=136210 08:07:49 Shutter LASER close 08:07:50 Received message from Camera: op=State serial=136212 08:07:50 GetSingleValue result=40 Value=cccccccc 08:07:50 SkyScan query 08:07:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:07:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:50 Parameters OK 08:07:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:50 Set A/D data flow result=40 08:07:50 Set A/D channel type result=40 08:07:50 Set A/D encoding result=40 08:07:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:50 Set channel filter=0.000000e+000 result=40 08:07:50 Config A/D Result=40 08:07:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:50 Get A/D filter: -9.255963e+061 result=40 08:07:50 Get A/D value=-858993460 result=40 08:07:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:50 Parameters OK 08:07:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:50 Set A/D data flow result=40 08:07:50 Set A/D channel type result=40 08:07:50 Set A/D encoding result=40 08:07:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:50 Set channel filter=0.000000e+000 result=40 08:07:50 Config A/D Result=40 08:07:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:50 Get A/D filter: -9.255963e+061 result=40 08:07:50 Get A/D value=-858993460 result=40 08:07:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:50 Aux= 08:07:50 Message to Camera, serial 136212 queued 08:08:27 Received message from Master: op=PointingHead serial=136225 08:08:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:08:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:08:27 Point started: ret=0 08:08:27 point_skyscan result=0 08:08:28 Check angles 08:08:28 SkyScan query 08:08:29 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 08:08:29 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 08:08:29 Check angles 08:08:29 SkyScan query 08:08:29 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 08:08:29 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 08:08:30 Check angles 08:08:30 SkyScan query 08:08:30 SkyScan query done: ret=0 az=98.985<-6599 ze=66.495<-7567 Statuses=0009 0008 08:08:30 Msec=1500 True Az=98.985 Ze=66.495 Az status=0009 Ze status=0008 08:08:30 Check angles 08:08:30 SkyScan query 08:08:31 SkyScan query done: ret=0 az=116.445<-7763 ze=66.495<-7567 Statuses=0009 0008 08:08:31 Msec=2250 True Az=116.445 Ze=66.495 Az status=0009 Ze status=0008 08:08:31 Check angles 08:08:31 SkyScan query 08:08:32 SkyScan query done: ret=0 az=133.86<-8924 ze=66.495<-7567 Statuses=0009 0008 08:08:32 Msec=3000 True Az=133.86 Ze=66.495 Az status=0009 Ze status=0008 08:08:32 Check angles 08:08:32 SkyScan query 08:08:32 SkyScan query done: ret=0 az=151.26<-10084 ze=66.495<-7567 Statuses=0009 0008 08:08:32 Msec=3750 True Az=151.26 Ze=66.495 Az status=0009 Ze status=0008 08:08:33 Check angles 08:08:33 SkyScan query 08:08:33 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:08:33 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:08:33 Message to Master queued w/err=0: serial=136225 error=0 08:08:38 Received message from Master: op=Filter serial=136226 08:08:38 Color wheel filter change from 0 to 0 08:08:38 FLIGetFilterPos err=0 currentPosition=0 08:08:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:38 Filter is already there-color wheel unchanged 08:08:38 Received message from Master: op=Shutter serial=136227 08:08:38 Shutter LASER close 08:08:38 Received message from Camera: op=State serial=136229 08:08:38 GetSingleValue result=40 Value=cccccccc 08:08:38 SkyScan query 08:08:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:08:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:39 Parameters OK 08:08:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:39 Set A/D data flow result=40 08:08:39 Set A/D channel type result=40 08:08:39 Set A/D encoding result=40 08:08:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:39 Set channel filter=0.000000e+000 result=40 08:08:39 Config A/D Result=40 08:08:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:39 Get A/D filter: -9.255963e+061 result=40 08:08:39 Get A/D value=-858993460 result=40 08:08:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:39 Parameters OK 08:08:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:39 Set A/D data flow result=40 08:08:39 Set A/D channel type result=40 08:08:39 Set A/D encoding result=40 08:08:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:39 Set channel filter=0.000000e+000 result=40 08:08:39 Config A/D Result=40 08:08:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:39 Get A/D filter: -9.255963e+061 result=40 08:08:39 Get A/D value=-858993460 result=40 08:08:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:39 Aux= 08:08:39 Message to Camera, serial 136229 queued 08:09:16 Received message from Master: op=PointingHead serial=136242 08:09:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:09:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:09:16 Point started: ret=0 08:09:16 point_skyscan result=0 08:09:17 Check angles 08:09:17 SkyScan query 08:09:17 SkyScan query done: ret=0 az=134.97<-8998 ze=36.69<-9554 Statuses=0009 0009 08:09:17 Msec=0 True Az=134.97 Ze=36.69 Az status=0009 Ze status=0009 08:09:18 Check angles 08:09:18 SkyScan query 08:09:18 SkyScan query done: ret=0 az=116.985<-7799 ze=15.33<-10978 Statuses=0009 0009 08:09:18 Msec=750 True Az=116.985 Ze=15.33 Az status=0009 Ze status=0009 08:09:18 Check angles 08:09:18 SkyScan query 08:09:19 SkyScan query done: ret=0 az=99.705<-6647 ze=-5.7<-12380 Statuses=0009 0009 08:09:19 Msec=1500 True Az=99.705 Ze=-5.7 Az status=0009 Ze status=0009 08:09:19 Check angles 08:09:19 SkyScan query 08:09:20 SkyScan query done: ret=0 az=82.17<-5478 ze=-26.67<-13778 Statuses=0009 0009 08:09:20 Msec=2250 True Az=82.17 Ze=-26.67 Az status=0009 Ze status=0009 08:09:20 Check angles 08:09:20 SkyScan query 08:09:20 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.58<-14572 Statuses=0009 0008 08:09:20 Msec=3000 True Az=64.77 Ze=-38.58 Az status=0009 Ze status=0008 08:09:21 Check angles 08:09:21 SkyScan query 08:09:21 SkyScan query done: ret=0 az=46.935<-3129 ze=-38.52<-14568 Statuses=0009 0008 08:09:21 Msec=3750 True Az=46.935 Ze=-38.52 Az status=0009 Ze status=0008 08:09:21 Check angles 08:09:21 SkyScan query 08:09:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:09:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:09:22 Message to Master queued w/err=0: serial=136242 error=0 08:09:27 Received message from Master: op=Filter serial=136243 08:09:27 Color wheel filter change from 0 to 0 08:09:27 FLIGetFilterPos err=0 currentPosition=0 08:09:27 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:27 Filter is already there-color wheel unchanged 08:09:27 Received message from Master: op=Shutter serial=136244 08:09:27 Shutter LASER close 08:09:27 Received message from Camera: op=State serial=136246 08:09:27 GetSingleValue result=40 Value=cccccccc 08:09:27 SkyScan query 08:09:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:09:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:28 Parameters OK 08:09:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:28 Set A/D data flow result=40 08:09:28 Set A/D channel type result=40 08:09:28 Set A/D encoding result=40 08:09:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:28 Set channel filter=0.000000e+000 result=40 08:09:28 Config A/D Result=40 08:09:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:28 Get A/D filter: -9.255963e+061 result=40 08:09:28 Get A/D value=-858993460 result=40 08:09:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:28 Parameters OK 08:09:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:28 Set A/D data flow result=40 08:09:28 Set A/D channel type result=40 08:09:28 Set A/D encoding result=40 08:09:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:28 Set channel filter=0.000000e+000 result=40 08:09:28 Config A/D Result=40 08:09:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:28 Get A/D filter: -9.255963e+061 result=40 08:09:28 Get A/D value=-858993460 result=40 08:09:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:28 Aux= 08:09:28 Message to Camera, serial 136246 queued 08:10:05 Received message from Master: op=PointingHead serial=136259 08:10:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:10:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:10:05 Point started: ret=0 08:10:05 point_skyscan result=0 08:10:06 Check angles 08:10:06 SkyScan query 08:10:06 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.16<-16544 Statuses=0009 0009 08:10:06 Msec=0 True Az=64.005 Ze=-68.16 Az status=0009 Ze status=0009 08:10:06 Check angles 08:10:06 SkyScan query 08:10:07 SkyScan query done: ret=0 az=81.465<-5431 ze=-89.13<-17942 Statuses=0009 0009 08:10:07 Msec=750 True Az=81.465 Ze=-89.13 Az status=0009 Ze status=0009 08:10:07 Check angles 08:10:07 SkyScan query 08:10:08 SkyScan query done: ret=0 az=98.955<-6597 ze=-110.055<-19337 Statuses=0009 0009 08:10:08 Msec=1500 True Az=98.955 Ze=-110.055 Az status=0009 Ze status=0009 08:10:08 Check angles 08:10:08 SkyScan query 08:10:09 SkyScan query done: ret=0 az=116.445<-7763 ze=-131.04<-20736 Statuses=0009 0009 08:10:09 Msec=2250 True Az=116.445 Ze=-131.04 Az status=0009 Ze status=0009 08:10:09 Check angles 08:10:09 SkyScan query 08:10:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 08:10:09 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 08:10:09 Check angles 08:10:09 SkyScan query 08:10:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:10:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:10:10 Message to Master queued w/err=0: serial=136259 error=0 08:10:15 Received message from Master: op=Filter serial=136260 08:10:15 Color wheel filter change from 0 to 0 08:10:15 FLIGetFilterPos err=0 currentPosition=0 08:10:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:15 Filter is already there-color wheel unchanged 08:10:15 Received message from Master: op=Shutter serial=136261 08:10:15 Shutter LASER close 08:10:15 Received message from Camera: op=State serial=136263 08:10:15 GetSingleValue result=40 Value=cccccccc 08:10:15 SkyScan query 08:10:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:10:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:16 Parameters OK 08:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:16 Set A/D data flow result=40 08:10:16 Set A/D channel type result=40 08:10:16 Set A/D encoding result=40 08:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:16 Set channel filter=0.000000e+000 result=40 08:10:16 Config A/D Result=40 08:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:16 Get A/D filter: -9.255963e+061 result=40 08:10:16 Get A/D value=-858993460 result=40 08:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:16 Parameters OK 08:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:16 Set A/D data flow result=40 08:10:16 Set A/D channel type result=40 08:10:16 Set A/D encoding result=40 08:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:16 Set channel filter=0.000000e+000 result=40 08:10:16 Config A/D Result=40 08:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:16 Get A/D filter: -9.255963e+061 result=40 08:10:16 Get A/D value=-858993460 result=40 08:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:16 Aux= 08:10:16 Message to Camera, serial 136263 queued 08:10:53 Received message from Master: op=PointingHead serial=136276 08:10:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:10:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:10:53 Point started: ret=0 08:10:53 point_skyscan result=0 08:10:54 Check angles 08:10:54 SkyScan query 08:10:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.42<-23428 Statuses=0008 0009 08:10:54 Msec=0 True Az=112.995 Ze=-171.42 Az status=0008 Ze status=0009 08:10:55 Check angles 08:10:55 SkyScan query 08:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:10:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:10:55 Message to Master queued w/err=0: serial=136276 error=0 08:11:00 Received message from Master: op=Filter serial=136277 08:11:00 Color wheel filter change from 0 to 0 08:11:00 FLIGetFilterPos err=0 currentPosition=0 08:11:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:00 Filter is already there-color wheel unchanged 08:11:00 Received message from Master: op=Shutter serial=136278 08:11:00 Shutter LASER open 08:11:00 Received message from Camera: op=State serial=136280 08:11:00 GetSingleValue result=40 Value=cccccccc 08:11:00 SkyScan query 08:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:11:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:01 Parameters OK 08:11:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:01 Set A/D data flow result=40 08:11:01 Set A/D channel type result=40 08:11:01 Set A/D encoding result=40 08:11:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:01 Set channel filter=0.000000e+000 result=40 08:11:01 Config A/D Result=40 08:11:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:01 Get A/D filter: -9.255963e+061 result=40 08:11:01 Get A/D value=-858993460 result=40 08:11:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:01 Parameters OK 08:11:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:01 Set A/D data flow result=40 08:11:01 Set A/D channel type result=40 08:11:01 Set A/D encoding result=40 08:11:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:01 Set channel filter=0.000000e+000 result=40 08:11:01 Config A/D Result=40 08:11:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:01 Get A/D filter: -9.255963e+061 result=40 08:11:01 Get A/D value=-858993460 result=40 08:11:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:01 Aux= 08:11:01 Message to Camera, serial 136280 queued 08:11:09 Received message from Master: op=Shutter serial=136290 08:11:09 Shutter LASER close 08:11:10 Received message from Master: op=PointingHead serial=136294 08:11:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:11:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:11:10 Point started: ret=0 08:11:10 point_skyscan result=0 08:11:11 Check angles 08:11:11 SkyScan query 08:11:12 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.505<-21567 Statuses=0009 0009 08:11:12 Msec=0 True Az=135.765 Ze=-143.505 Az status=0009 Ze status=0009 08:11:12 Check angles 08:11:12 SkyScan query 08:11:12 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.535<-20169 Statuses=0009 0009 08:11:12 Msec=750 True Az=153.225 Ze=-122.535 Az status=0009 Ze status=0009 08:11:13 Check angles 08:11:13 SkyScan query 08:11:13 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.64<-18776 Statuses=0009 0009 08:11:13 Msec=1500 True Az=170.805 Ze=-101.64 Az status=0009 Ze status=0009 08:11:13 Check angles 08:11:13 SkyScan query 08:11:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.595<-17373 Statuses=0008 0009 08:11:14 Msec=2250 True Az=176.01 Ze=-80.595 Az status=0008 Ze status=0009 08:11:14 Check angles 08:11:14 SkyScan query 08:11:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.235<-15949 Statuses=0008 0009 08:11:15 Msec=3000 True Az=175.995 Ze=-59.235 Az status=0008 Ze status=0009 08:11:15 Check angles 08:11:15 SkyScan query 08:11:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 08:11:15 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 08:11:15 Message to Master queued w/err=0: serial=136294 error=0 08:11:20 Received message from Master: op=Filter serial=136295 08:11:20 Color wheel filter change from 0 to 0 08:11:20 FLIGetFilterPos err=0 currentPosition=0 08:11:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:20 Filter is already there-color wheel unchanged 08:11:21 Received message from Master: op=Shutter serial=136296 08:11:21 Shutter LASER close 08:11:21 Received message from Camera: op=State serial=136298 08:11:21 GetSingleValue result=40 Value=cccccccc 08:11:21 SkyScan query 08:11:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:11:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:21 Parameters OK 08:11:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:21 Set A/D data flow result=40 08:11:21 Set A/D channel type result=40 08:11:21 Set A/D encoding result=40 08:11:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:21 Set channel filter=0.000000e+000 result=40 08:11:21 Config A/D Result=40 08:11:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:21 Get A/D filter: -9.255963e+061 result=40 08:11:21 Get A/D value=-858993460 result=40 08:11:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:21 Parameters OK 08:11:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:21 Set A/D data flow result=40 08:11:21 Set A/D channel type result=40 08:11:21 Set A/D encoding result=40 08:11:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:21 Set channel filter=0.000000e+000 result=40 08:11:21 Config A/D Result=40 08:11:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:21 Get A/D filter: -9.255963e+061 result=40 08:11:21 Get A/D value=-858993460 result=40 08:11:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:21 Aux= 08:11:21 Message to Camera, serial 136298 queued 08:11:57 Received message from Master: op=PointingHead serial=136310 08:11:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:11:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:11:58 Point started: ret=0 08:11:58 point_skyscan result=0 08:11:58 Check angles 08:11:58 SkyScan query 08:11:59 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.87<-13458 Statuses=0009 0009 08:11:59 Msec=0 True Az=153.12 Ze=-21.87 Az status=0009 Ze status=0009 08:11:59 Check angles 08:11:59 SkyScan query 08:12:00 SkyScan query done: ret=0 az=135.75<-9050 ze=-0.945<-12063 Statuses=0009 0009 08:12:00 Msec=750 True Az=135.75 Ze=-0.945 Az status=0009 Ze status=0009 08:12:00 Check angles 08:12:00 SkyScan query 08:12:00 SkyScan query done: ret=0 az=117.795<-7853 ze=20.43<-10638 Statuses=0009 0009 08:12:00 Msec=1500 True Az=117.795 Ze=20.43 Az status=0009 Ze status=0009 08:12:01 Check angles 08:12:01 SkyScan query 08:12:01 SkyScan query done: ret=0 az=99.96<-6664 ze=41.835<-9211 Statuses=0009 0009 08:12:01 Msec=2250 True Az=99.96 Ze=41.835 Az status=0009 Ze status=0009 08:12:01 Check angles 08:12:01 SkyScan query 08:12:02 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 08:12:02 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 08:12:02 Check angles 08:12:02 SkyScan query 08:12:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:12:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:12:03 Message to Master queued w/err=0: serial=136310 error=0 08:12:08 Received message from Master: op=Filter serial=136311 08:12:08 Color wheel filter change from 0 to 0 08:12:08 FLIGetFilterPos err=0 currentPosition=0 08:12:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:08 Filter is already there-color wheel unchanged 08:12:08 Received message from Master: op=Shutter serial=136312 08:12:08 Shutter LASER close 08:12:08 Received message from Camera: op=State serial=136314 08:12:08 GetSingleValue result=40 Value=cccccccc 08:12:08 SkyScan query 08:12:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:12:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:09 Parameters OK 08:12:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:09 Set A/D data flow result=40 08:12:09 Set A/D channel type result=40 08:12:09 Set A/D encoding result=40 08:12:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:09 Set channel filter=0.000000e+000 result=40 08:12:09 Config A/D Result=40 08:12:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:09 Get A/D filter: -9.255963e+061 result=40 08:12:09 Get A/D value=-858993460 result=40 08:12:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:09 Parameters OK 08:12:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:09 Set A/D data flow result=40 08:12:09 Set A/D channel type result=40 08:12:09 Set A/D encoding result=40 08:12:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:09 Set channel filter=0.000000e+000 result=40 08:12:09 Config A/D Result=40 08:12:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:09 Get A/D filter: -9.255963e+061 result=40 08:12:09 Get A/D value=-858993460 result=40 08:12:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:09 Aux= 08:12:09 Message to Camera, serial 136314 queued 08:12:45 Received message from Master: op=PointingHead serial=136327 08:12:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:12:45 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:12:46 Point started: ret=0 08:12:46 point_skyscan result=0 08:12:46 Check angles 08:12:46 SkyScan query 08:12:47 SkyScan query done: ret=0 az=109.11<-7274 ze=38.475<-9435 Statuses=0009 0008 08:12:47 Msec=0 True Az=109.11 Ze=38.475 Az status=0009 Ze status=0008 08:12:47 Check angles 08:12:47 SkyScan query 08:12:48 SkyScan query done: ret=0 az=126.93<-8462 ze=38.49<-9434 Statuses=0009 0008 08:12:48 Msec=750 True Az=126.93 Ze=38.49 Az status=0009 Ze status=0008 08:12:48 Check angles 08:12:48 SkyScan query 08:12:49 SkyScan query done: ret=0 az=144.81<-9654 ze=38.505<-9433 Statuses=0009 0008 08:12:49 Msec=1500 True Az=144.81 Ze=38.505 Az status=0009 Ze status=0008 08:12:49 Check angles 08:12:49 SkyScan query 08:12:49 SkyScan query done: ret=0 az=162.24<-10816 ze=38.505<-9433 Statuses=0009 0008 08:12:49 Msec=2250 True Az=162.24 Ze=38.505 Az status=0009 Ze status=0008 08:12:49 Check angles 08:12:49 SkyScan query 08:12:50 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 08:12:50 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 08:12:50 Check angles 08:12:50 SkyScan query 08:12:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:12:51 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:12:51 Message to Master queued w/err=0: serial=136327 error=0 08:12:56 Received message from Master: op=Filter serial=136328 08:12:56 Color wheel filter change from 0 to 0 08:12:56 FLIGetFilterPos err=0 currentPosition=0 08:12:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:56 Filter is already there-color wheel unchanged 08:12:56 Received message from Master: op=Shutter serial=136329 08:12:56 Shutter LASER close 08:12:56 Received message from Camera: op=State serial=136331 08:12:56 GetSingleValue result=40 Value=cccccccc 08:12:56 SkyScan query 08:12:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:12:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:57 Parameters OK 08:12:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:57 Set A/D data flow result=40 08:12:57 Set A/D channel type result=40 08:12:57 Set A/D encoding result=40 08:12:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:57 Set channel filter=0.000000e+000 result=40 08:12:57 Config A/D Result=40 08:12:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:57 Get A/D filter: -9.255963e+061 result=40 08:12:57 Get A/D value=-858993460 result=40 08:12:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:57 Parameters OK 08:12:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:57 Set A/D data flow result=40 08:12:57 Set A/D channel type result=40 08:12:57 Set A/D encoding result=40 08:12:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:57 Set channel filter=0.000000e+000 result=40 08:12:57 Config A/D Result=40 08:12:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:57 Get A/D filter: -9.255963e+061 result=40 08:12:57 Get A/D value=-858993460 result=40 08:12:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:57 Aux= 08:12:57 Message to Camera, serial 136331 queued 08:13:33 Received message from Master: op=PointingHead serial=136344 08:13:33 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:13:33 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:13:34 Point started: ret=0 08:13:34 point_skyscan result=0 08:13:35 Check angles 08:13:35 SkyScan query 08:13:35 SkyScan query done: ret=0 az=153.18<-10212 ze=8.97<-11402 Statuses=0009 0009 08:13:35 Msec=0 True Az=153.18 Ze=8.97 Az status=0009 Ze status=0009 08:13:35 Check angles 08:13:35 SkyScan query 08:13:36 SkyScan query done: ret=0 az=135.735<-9049 ze=-12<-12800 Statuses=0009 0009 08:13:36 Msec=750 True Az=135.735 Ze=-12 Az status=0009 Ze status=0009 08:13:36 Check angles 08:13:36 SkyScan query 08:13:37 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.39<-14226 Statuses=0009 0009 08:13:37 Msec=1500 True Az=117.765 Ze=-33.39 Az status=0009 Ze status=0009 08:13:37 Check angles 08:13:37 SkyScan query 08:13:37 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.555<-15437 Statuses=0009 0009 08:13:37 Msec=2250 True Az=100.41 Ze=-51.555 Az status=0009 Ze status=0009 08:13:38 Check angles 08:13:38 SkyScan query 08:13:38 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 08:13:38 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 08:13:38 Check angles 08:13:38 SkyScan query 08:13:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:13:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:13:39 Message to Master queued w/err=0: serial=136344 error=0 08:13:44 Received message from Master: op=Filter serial=136345 08:13:44 Color wheel filter change from 0 to 0 08:13:44 FLIGetFilterPos err=0 currentPosition=0 08:13:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:44 Filter is already there-color wheel unchanged 08:13:44 Received message from Master: op=Shutter serial=136346 08:13:44 Shutter LASER close 08:13:44 Received message from Camera: op=State serial=136348 08:13:44 GetSingleValue result=40 Value=cccccccc 08:13:44 SkyScan query 08:13:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:13:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:45 Parameters OK 08:13:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:45 Set A/D data flow result=40 08:13:45 Set A/D channel type result=40 08:13:45 Set A/D encoding result=40 08:13:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:45 Set channel filter=0.000000e+000 result=40 08:13:45 Config A/D Result=40 08:13:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:45 Get A/D filter: -9.255963e+061 result=40 08:13:45 Get A/D value=-858993460 result=40 08:13:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:45 Parameters OK 08:13:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:45 Set A/D data flow result=40 08:13:45 Set A/D channel type result=40 08:13:45 Set A/D encoding result=40 08:13:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:45 Set channel filter=0.000000e+000 result=40 08:13:45 Config A/D Result=40 08:13:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:45 Get A/D filter: -9.255963e+061 result=40 08:13:45 Get A/D value=-858993460 result=40 08:13:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:45 Aux= 08:13:45 Message to Camera, serial 136348 queued 08:14:22 Received message from Master: op=PointingHead serial=136361 08:14:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:14:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:14:22 Point started: ret=0 08:14:22 point_skyscan result=0 08:14:23 Check angles 08:14:23 SkyScan query 08:14:23 SkyScan query done: ret=0 az=109.245<-7283 ze=-81.3<-17420 Statuses=0009 0009 08:14:23 Msec=0 True Az=109.245 Ze=-81.3 Az status=0009 Ze status=0009 08:14:23 Check angles 08:14:23 SkyScan query 08:14:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.69<-18846 Statuses=0008 0009 08:14:24 Msec=750 True Az=112.995 Ze=-102.69 Az status=0008 Ze status=0009 08:14:24 Check angles 08:14:24 SkyScan query 08:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.08<-20272 Statuses=0008 0009 08:14:25 Msec=1500 True Az=112.995 Ze=-124.08 Az status=0008 Ze status=0009 08:14:25 Check angles 08:14:25 SkyScan query 08:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.02<-21668 Statuses=0008 0009 08:14:25 Msec=2250 True Az=112.995 Ze=-145.02 Az status=0008 Ze status=0009 08:14:26 Check angles 08:14:26 SkyScan query 08:14:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.975<-23065 Statuses=0008 0009 08:14:26 Msec=3000 True Az=112.995 Ze=-165.975 Az status=0008 Ze status=0009 08:14:26 Check angles 08:14:26 SkyScan query 08:14:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:14:27 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:14:27 Message to Master queued w/err=0: serial=136361 error=0 08:14:32 Received message from Master: op=Filter serial=136362 08:14:32 Color wheel filter change from 0 to 0 08:14:32 FLIGetFilterPos err=0 currentPosition=0 08:14:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:32 Filter is already there-color wheel unchanged 08:14:32 Received message from Master: op=Shutter serial=136363 08:14:32 Shutter LASER open 08:14:32 Received message from Camera: op=State serial=136365 08:14:32 GetSingleValue result=40 Value=cccccccc 08:14:32 SkyScan query 08:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:14:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:33 Parameters OK 08:14:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:33 Set A/D data flow result=40 08:14:33 Set A/D channel type result=40 08:14:33 Set A/D encoding result=40 08:14:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:33 Set channel filter=0.000000e+000 result=40 08:14:33 Config A/D Result=40 08:14:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:33 Get A/D filter: -9.255963e+061 result=40 08:14:33 Get A/D value=-858993460 result=40 08:14:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:33 Parameters OK 08:14:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:33 Set A/D data flow result=40 08:14:33 Set A/D channel type result=40 08:14:33 Set A/D encoding result=40 08:14:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:33 Set channel filter=0.000000e+000 result=40 08:14:33 Config A/D Result=40 08:14:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:33 Get A/D filter: -9.255963e+061 result=40 08:14:33 Get A/D value=-858993460 result=40 08:14:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:33 Aux= 08:14:33 Message to Camera, serial 136365 queued 08:14:41 Received message from Master: op=Shutter serial=136375 08:14:41 Shutter LASER close 08:14:42 Received message from Master: op=PointingHead serial=136379 08:14:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:14:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:14:42 Point started: ret=0 08:14:42 point_skyscan result=0 08:14:43 Check angles 08:14:43 SkyScan query 08:14:43 SkyScan query done: ret=0 az=89.835<-5989 ze=157.26<-1516 Statuses=0009 0009 08:14:43 Msec=0 True Az=89.835 Ze=157.26 Az status=0009 Ze status=0009 08:14:44 Check angles 08:14:44 SkyScan query 08:14:44 SkyScan query done: ret=0 az=72.39<-4826 ze=136.305<-2913 Statuses=0009 0009 08:14:44 Msec=750 True Az=72.39 Ze=136.305 Az status=0009 Ze status=0009 08:14:44 Check angles 08:14:44 SkyScan query 08:14:45 SkyScan query done: ret=0 az=54.675<-3645 ze=114.915<-4339 Statuses=0009 0009 08:14:45 Msec=1500 True Az=54.675 Ze=114.915 Az status=0009 Ze status=0009 08:14:45 Check angles 08:14:45 SkyScan query 08:14:46 SkyScan query done: ret=0 az=40.98<-2732 ze=93.96<-5736 Statuses=0009 0009 08:14:46 Msec=2250 True Az=40.98 Ze=93.96 Az status=0009 Ze status=0009 08:14:46 Check angles 08:14:46 SkyScan query 08:14:46 SkyScan query done: ret=0 az=40.995<-2733 ze=72.96<-7136 Statuses=0008 0009 08:14:46 Msec=3000 True Az=40.995 Ze=72.96 Az status=0008 Ze status=0009 08:14:47 Check angles 08:14:47 SkyScan query 08:14:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 08:14:47 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 08:14:47 Check angles 08:14:47 SkyScan query 08:14:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:14:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:14:48 Message to Master queued w/err=0: serial=136379 error=0 08:14:53 Received message from Master: op=Filter serial=136380 08:14:53 Color wheel filter change from 0 to 0 08:14:53 FLIGetFilterPos err=0 currentPosition=0 08:14:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:53 Filter is already there-color wheel unchanged 08:14:53 Received message from Master: op=Shutter serial=136381 08:14:53 Shutter LASER close 08:14:53 Received message from Camera: op=State serial=136383 08:14:53 GetSingleValue result=40 Value=cccccccc 08:14:53 SkyScan query 08:14:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:14:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:54 Parameters OK 08:14:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:54 Set A/D data flow result=40 08:14:54 Set A/D channel type result=40 08:14:54 Set A/D encoding result=40 08:14:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:54 Set channel filter=0.000000e+000 result=40 08:14:54 Config A/D Result=40 08:14:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:54 Get A/D filter: -9.255963e+061 result=40 08:14:54 Get A/D value=-858993460 result=40 08:14:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:54 Parameters OK 08:14:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:54 Set A/D data flow result=40 08:14:54 Set A/D channel type result=40 08:14:54 Set A/D encoding result=40 08:14:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:54 Set channel filter=0.000000e+000 result=40 08:14:54 Config A/D Result=40 08:14:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:54 Get A/D filter: -9.255963e+061 result=40 08:14:54 Get A/D value=-858993460 result=40 08:14:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:54 Aux= 08:14:54 Message to Camera, serial 136383 queued 08:15:27 Received message from Master: op=Identify serial=136389 08:15:31 Received message from Master: op=PointingHead serial=136399 08:15:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:15:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:15:31 Point started: ret=0 08:15:31 point_skyscan result=0 08:15:32 Check angles 08:15:32 SkyScan query 08:15:32 SkyScan query done: ret=0 az=63.945<-4263 ze=66.54<-7564 Statuses=0009 0008 08:15:32 Msec=0 True Az=63.945 Ze=66.54 Az status=0009 Ze status=0008 08:15:33 Check angles 08:15:33 SkyScan query 08:15:33 SkyScan query done: ret=0 az=81.435<-5429 ze=66.51<-7566 Statuses=0009 0008 08:15:33 Msec=750 True Az=81.435 Ze=66.51 Az status=0009 Ze status=0008 08:15:33 Check angles 08:15:33 SkyScan query 08:15:34 SkyScan query done: ret=0 az=98.88<-6592 ze=66.495<-7567 Statuses=0009 0008 08:15:34 Msec=1500 True Az=98.88 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-14 08:15:34] 08:15:34 Check angles 08:15:34 SkyScan query 08:15:35 SkyScan query done: ret=0 az=117.765<-7851 ze=66.495<-7567 Statuses=0009 0008 08:15:35 Msec=2250 True Az=117.765 Ze=66.495 Az status=0009 Ze status=0008 08:15:35 Check angles 08:15:35 SkyScan query 08:15:35 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 08:15:35 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 08:15:36 Check angles 08:15:36 SkyScan query 08:15:36 SkyScan query done: ret=0 az=151.2<-10080 ze=66.495<-7567 Statuses=0009 0008 08:15:36 Msec=3750 True Az=151.2 Ze=66.495 Az status=0009 Ze status=0008 08:15:36 Check angles 08:15:36 SkyScan query 08:15:37 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:15:37 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:15:37 Message to Master queued w/err=0: serial=136399 error=0 08:15:42 Received message from Master: op=Filter serial=136400 08:15:42 Color wheel filter change from 0 to 0 08:15:42 FLIGetFilterPos err=0 currentPosition=0 08:15:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:42 Filter is already there-color wheel unchanged 08:15:42 Received message from Master: op=Shutter serial=136401 08:15:42 Shutter LASER close 08:15:42 Received message from Camera: op=State serial=136403 08:15:42 GetSingleValue result=40 Value=cccccccc 08:15:42 SkyScan query 08:15:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:15:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:43 Parameters OK 08:15:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:43 Set A/D data flow result=40 08:15:43 Set A/D channel type result=40 08:15:43 Set A/D encoding result=40 08:15:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:43 Set channel filter=0.000000e+000 result=40 08:15:43 Config A/D Result=40 08:15:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:43 Get A/D filter: -9.255963e+061 result=40 08:15:43 Get A/D value=-858993460 result=40 08:15:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:43 Parameters OK 08:15:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:43 Set A/D data flow result=40 08:15:43 Set A/D channel type result=40 08:15:43 Set A/D encoding result=40 08:15:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:43 Set channel filter=0.000000e+000 result=40 08:15:43 Config A/D Result=40 08:15:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:43 Get A/D filter: -9.255963e+061 result=40 08:15:43 Get A/D value=-858993460 result=40 08:15:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:43 Aux= 08:15:43 Message to Camera, serial 136403 queued [UTC 2018-12-14 08:15:52] 08:16:20 Received message from Master: op=PointingHead serial=136416 08:16:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:16:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:16:20 Point started: ret=0 08:16:20 point_skyscan result=0 08:16:21 Check angles 08:16:21 SkyScan query 08:16:21 SkyScan query done: ret=0 az=134.79<-8986 ze=36.69<-9554 Statuses=0009 0009 08:16:21 Msec=0 True Az=134.79 Ze=36.69 Az status=0009 Ze status=0009 08:16:21 Check angles 08:16:21 SkyScan query 08:16:22 SkyScan query done: ret=0 az=117.06<-7804 ze=15.315<-10979 Statuses=0009 0009 08:16:22 Msec=750 True Az=117.06 Ze=15.315 Az status=0009 Ze status=0009 08:16:22 Check angles 08:16:22 SkyScan query 08:16:23 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.67<-12378 Statuses=0009 0009 08:16:23 Msec=1500 True Az=99.66 Ze=-5.67 Az status=0009 Ze status=0009 08:16:23 Check angles 08:16:23 SkyScan query 08:16:23 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.64<-13776 Statuses=0009 0009 08:16:23 Msec=2250 True Az=82.2 Ze=-26.64 Az status=0009 Ze status=0009 08:16:24 Check angles 08:16:24 SkyScan query 08:16:24 SkyScan query done: ret=0 az=64.215<-4281 ze=-38.58<-14572 Statuses=0009 0008 08:16:24 Msec=3000 True Az=64.215 Ze=-38.58 Az status=0009 Ze status=0008 08:16:24 Check angles 08:16:24 SkyScan query 08:16:25 SkyScan query done: ret=0 az=46.485<-3099 ze=-38.52<-14568 Statuses=0009 0008 08:16:25 Msec=3750 True Az=46.485 Ze=-38.52 Az status=0009 Ze status=0008 08:16:25 Check angles 08:16:25 SkyScan query 08:16:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:16:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:16:26 Message to Master queued w/err=0: serial=136416 error=0 08:16:31 Received message from Master: op=Filter serial=136417 08:16:31 Color wheel filter change from 0 to 0 08:16:31 FLIGetFilterPos err=0 currentPosition=0 08:16:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:31 Filter is already there-color wheel unchanged 08:16:31 Received message from Master: op=Shutter serial=136418 08:16:31 Shutter LASER close 08:16:31 Received message from Camera: op=State serial=136420 08:16:31 GetSingleValue result=40 Value=cccccccc 08:16:31 SkyScan query 08:16:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:16:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:32 Parameters OK 08:16:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:32 Set A/D data flow result=40 08:16:32 Set A/D channel type result=40 08:16:32 Set A/D encoding result=40 08:16:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:32 Set channel filter=0.000000e+000 result=40 08:16:32 Config A/D Result=40 08:16:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:32 Get A/D filter: -9.255963e+061 result=40 08:16:32 Get A/D value=-858993460 result=40 08:16:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:32 Parameters OK 08:16:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:32 Set A/D data flow result=40 08:16:32 Set A/D channel type result=40 08:16:32 Set A/D encoding result=40 08:16:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:32 Set channel filter=0.000000e+000 result=40 08:16:32 Config A/D Result=40 08:16:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:32 Get A/D filter: -9.255963e+061 result=40 08:16:32 Get A/D value=-858993460 result=40 08:16:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:32 Aux= 08:16:32 Message to Camera, serial 136420 queued 08:17:07 Received message from Master: op=PointingHead serial=136432 08:17:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:17:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:17:08 Point started: ret=0 08:17:08 point_skyscan result=0 08:17:09 Check angles 08:17:09 SkyScan query 08:17:09 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.295<-16553 Statuses=0009 0009 08:17:09 Msec=0 True Az=63.99 Ze=-68.295 Az status=0009 Ze status=0009 08:17:09 Check angles 08:17:09 SkyScan query 08:17:10 SkyScan query done: ret=0 az=81.435<-5429 ze=-89.25<-17950 Statuses=0009 0009 08:17:10 Msec=750 True Az=81.435 Ze=-89.25 Az status=0009 Ze status=0009 08:17:10 Check angles 08:17:10 SkyScan query 08:17:11 SkyScan query done: ret=0 az=99.24<-6616 ze=-110.64<-19376 Statuses=0009 0009 08:17:11 Msec=1500 True Az=99.24 Ze=-110.64 Az status=0009 Ze status=0009 08:17:11 Check angles 08:17:11 SkyScan query 08:17:11 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.58<-20772 Statuses=0009 0009 08:17:11 Msec=2250 True Az=116.805 Ze=-131.58 Az status=0009 Ze status=0009 08:17:12 Check angles 08:17:12 SkyScan query 08:17:12 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 08:17:12 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 08:17:12 Check angles 08:17:12 SkyScan query 08:17:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 08:17:13 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 08:17:13 Message to Master queued w/err=0: serial=136432 error=0 08:17:18 Received message from Master: op=Filter serial=136433 08:17:18 Color wheel filter change from 0 to 0 08:17:18 FLIGetFilterPos err=0 currentPosition=0 08:17:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:18 Filter is already there-color wheel unchanged 08:17:18 Received message from Master: op=Shutter serial=136434 08:17:18 Shutter LASER close 08:17:18 Received message from Camera: op=State serial=136436 08:17:18 GetSingleValue result=40 Value=cccccccc 08:17:18 SkyScan query 08:17:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:17:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:19 Parameters OK 08:17:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:19 Set A/D data flow result=40 08:17:19 Set A/D channel type result=40 08:17:19 Set A/D encoding result=40 08:17:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:19 Set channel filter=0.000000e+000 result=40 08:17:19 Config A/D Result=40 08:17:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:19 Get A/D filter: -9.255963e+061 result=40 08:17:19 Get A/D value=-858993460 result=40 08:17:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:19 Parameters OK 08:17:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:19 Set A/D data flow result=40 08:17:19 Set A/D channel type result=40 08:17:19 Set A/D encoding result=40 08:17:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:19 Set channel filter=0.000000e+000 result=40 08:17:19 Config A/D Result=40 08:17:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:19 Get A/D filter: -9.255963e+061 result=40 08:17:19 Get A/D value=-858993460 result=40 08:17:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:19 Aux= 08:17:19 Message to Camera, serial 136436 queued 08:17:56 Received message from Master: op=PointingHead serial=136449 08:17:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:17:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:17:56 Point started: ret=0 08:17:56 point_skyscan result=0 08:17:57 Check angles 08:17:57 SkyScan query 08:17:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0009 0009 08:17:57 Msec=0 True Az=112.995 Ze=-171.435 Az status=0009 Ze status=0009 08:17:57 Check angles 08:17:57 SkyScan query 08:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:17:58 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:17:58 Message to Master queued w/err=0: serial=136449 error=0 08:18:03 Received message from Master: op=Filter serial=136450 08:18:03 Color wheel filter change from 0 to 0 08:18:03 FLIGetFilterPos err=0 currentPosition=0 08:18:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:03 Filter is already there-color wheel unchanged 08:18:03 Received message from Master: op=Shutter serial=136451 08:18:03 Shutter LASER open 08:18:03 Received message from Camera: op=State serial=136453 08:18:03 GetSingleValue result=40 Value=cccccccc 08:18:03 SkyScan query 08:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:18:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:04 Parameters OK 08:18:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:04 Set A/D data flow result=40 08:18:04 Set A/D channel type result=40 08:18:04 Set A/D encoding result=40 08:18:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:04 Set channel filter=0.000000e+000 result=40 08:18:04 Config A/D Result=40 08:18:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:04 Get A/D filter: -9.255963e+061 result=40 08:18:04 Get A/D value=-858993460 result=40 08:18:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:04 Parameters OK 08:18:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:04 Set A/D data flow result=40 08:18:04 Set A/D channel type result=40 08:18:04 Set A/D encoding result=40 08:18:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:04 Set channel filter=0.000000e+000 result=40 08:18:04 Config A/D Result=40 08:18:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:04 Get A/D filter: -9.255963e+061 result=40 08:18:04 Get A/D value=-858993460 result=40 08:18:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:04 Aux= 08:18:04 Message to Camera, serial 136453 queued 08:18:12 Received message from Master: op=Shutter serial=136463 08:18:12 Shutter LASER close 08:18:13 Received message from Master: op=PointingHead serial=136467 08:18:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:18:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:18:13 Point started: ret=0 08:18:13 point_skyscan result=0 08:18:14 Check angles 08:18:14 SkyScan query 08:18:15 SkyScan query done: ret=0 az=136.14<-9076 ze=-142.98<-21532 Statuses=0009 0009 08:18:15 Msec=0 True Az=136.14 Ze=-142.98 Az status=0009 Ze status=0009 08:18:15 Check angles 08:18:15 SkyScan query 08:18:15 SkyScan query done: ret=0 az=153.675<-10245 ze=-121.995<-20133 Statuses=0009 0009 08:18:15 Msec=750 True Az=153.675 Ze=-121.995 Az status=0009 Ze status=0009 08:18:16 Check angles 08:18:16 SkyScan query 08:18:16 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.085<-18739 Statuses=0009 0009 08:18:16 Msec=1500 True Az=171.24 Ze=-101.085 Az status=0009 Ze status=0009 08:18:16 Check angles 08:18:16 SkyScan query 08:18:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.695<-17313 Statuses=0008 0009 08:18:17 Msec=2250 True Az=176.01 Ze=-79.695 Az status=0008 Ze status=0009 08:18:17 Check angles 08:18:17 SkyScan query 08:18:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.71<-15914 Statuses=0008 0009 08:18:18 Msec=3000 True Az=176.01 Ze=-58.71 Az status=0008 Ze status=0009 08:18:18 Check angles 08:18:18 SkyScan query 08:18:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:18:18 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:18:18 Message to Master queued w/err=0: serial=136467 error=0 08:18:23 Received message from Master: op=Filter serial=136468 08:18:23 Color wheel filter change from 0 to 0 08:18:23 FLIGetFilterPos err=0 currentPosition=0 08:18:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:23 Filter is already there-color wheel unchanged 08:18:24 Received message from Master: op=Shutter serial=136469 08:18:24 Shutter LASER close 08:18:24 Received message from Camera: op=State serial=136471 08:18:24 GetSingleValue result=40 Value=cccccccc 08:18:24 SkyScan query 08:18:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:18:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:24 Parameters OK 08:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:24 Set A/D data flow result=40 08:18:24 Set A/D channel type result=40 08:18:24 Set A/D encoding result=40 08:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:24 Set channel filter=0.000000e+000 result=40 08:18:24 Config A/D Result=40 08:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:24 Get A/D filter: -9.255963e+061 result=40 08:18:24 Get A/D value=-858993460 result=40 08:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:24 Parameters OK 08:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:24 Set A/D data flow result=40 08:18:24 Set A/D channel type result=40 08:18:24 Set A/D encoding result=40 08:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:24 Set channel filter=0.000000e+000 result=40 08:18:24 Config A/D Result=40 08:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:24 Get A/D filter: -9.255963e+061 result=40 08:18:24 Get A/D value=-858993460 result=40 08:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:24 Aux= 08:18:24 Message to Camera, serial 136471 queued 08:19:01 Received message from Master: op=PointingHead serial=136484 08:19:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:19:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:19:01 Point started: ret=0 08:19:01 point_skyscan result=0 08:19:02 Check angles 08:19:02 SkyScan query 08:19:03 SkyScan query done: ret=0 az=152.64<-10176 ze=-21.255<-13417 Statuses=0009 0009 08:19:03 Msec=0 True Az=152.64 Ze=-21.255 Az status=0009 Ze status=0009 08:19:03 Check angles 08:19:03 SkyScan query 08:19:04 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.3<-12020 Statuses=0009 0009 08:19:04 Msec=750 True Az=135.105 Ze=-0.3 Az status=0009 Ze status=0009 08:19:04 Check angles 08:19:04 SkyScan query 08:19:04 SkyScan query done: ret=0 az=117.585<-7839 ze=20.64<-10624 Statuses=0009 0009 08:19:04 Msec=1500 True Az=117.585 Ze=20.64 Az status=0009 Ze status=0009 08:19:04 Check angles 08:19:04 SkyScan query 08:19:05 SkyScan query done: ret=0 az=100.23<-6682 ze=41.61<-9226 Statuses=0009 0009 08:19:05 Msec=2250 True Az=100.23 Ze=41.61 Az status=0009 Ze status=0009 08:19:05 Check angles 08:19:05 SkyScan query 08:19:06 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 08:19:06 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 08:19:06 Check angles 08:19:06 SkyScan query 08:19:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:19:07 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:19:07 Message to Master queued w/err=0: serial=136484 error=0 08:19:12 Received message from Master: op=Filter serial=136485 08:19:12 Color wheel filter change from 0 to 0 08:19:12 FLIGetFilterPos err=0 currentPosition=0 08:19:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:12 Filter is already there-color wheel unchanged 08:19:12 Received message from Master: op=Shutter serial=136486 08:19:12 Shutter LASER close 08:19:12 Received message from Camera: op=State serial=136488 08:19:12 GetSingleValue result=40 Value=cccccccc 08:19:12 SkyScan query 08:19:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:19:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:12 Parameters OK 08:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:12 Set A/D data flow result=40 08:19:12 Set A/D channel type result=40 08:19:12 Set A/D encoding result=40 08:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:12 Set channel filter=0.000000e+000 result=40 08:19:12 Config A/D Result=40 08:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:12 Get A/D filter: -9.255963e+061 result=40 08:19:12 Get A/D value=-858993460 result=40 08:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:12 Parameters OK 08:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:12 Set A/D data flow result=40 08:19:12 Set A/D channel type result=40 08:19:12 Set A/D encoding result=40 08:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:12 Set channel filter=0.000000e+000 result=40 08:19:12 Config A/D Result=40 08:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:12 Get A/D filter: -9.255963e+061 result=40 08:19:12 Get A/D value=-858993460 result=40 08:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:12 Aux= 08:19:12 Message to Camera, serial 136488 queued 08:19:49 Received message from Master: op=PointingHead serial=136501 08:19:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:19:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:19:50 Point started: ret=0 08:19:50 point_skyscan result=0 08:19:50 Check angles 08:19:50 SkyScan query 08:19:51 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 08:19:51 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 08:19:51 Check angles 08:19:51 SkyScan query 08:19:52 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 08:19:52 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 08:19:52 Check angles 08:19:52 SkyScan query 08:19:52 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 08:19:52 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 08:19:53 Check angles 08:19:53 SkyScan query 08:19:53 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 08:19:53 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 08:19:53 Check angles 08:19:53 SkyScan query 08:19:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 08:19:54 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 08:19:54 Check angles 08:19:54 SkyScan query 08:19:55 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:19:55 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:19:55 Message to Master queued w/err=0: serial=136501 error=0 08:20:00 Received message from Master: op=Filter serial=136502 08:20:00 Color wheel filter change from 0 to 0 08:20:00 FLIGetFilterPos err=0 currentPosition=0 08:20:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:00 Filter is already there-color wheel unchanged 08:20:00 Received message from Master: op=Shutter serial=136503 08:20:00 Shutter LASER close 08:20:00 Received message from Camera: op=State serial=136505 08:20:00 GetSingleValue result=40 Value=cccccccc 08:20:00 SkyScan query 08:20:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:20:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:00 Parameters OK 08:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:00 Set A/D data flow result=40 08:20:00 Set A/D channel type result=40 08:20:00 Set A/D encoding result=40 08:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:00 Set channel filter=0.000000e+000 result=40 08:20:00 Config A/D Result=40 08:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:00 Get A/D filter: -9.255963e+061 result=40 08:20:00 Get A/D value=-858993460 result=40 08:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:00 Parameters OK 08:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:00 Set A/D data flow result=40 08:20:00 Set A/D channel type result=40 08:20:00 Set A/D encoding result=40 08:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:00 Set channel filter=0.000000e+000 result=40 08:20:00 Config A/D Result=40 08:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:00 Get A/D filter: -9.255963e+061 result=40 08:20:00 Get A/D value=-858993460 result=40 08:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:00 Aux= 08:20:00 Message to Camera, serial 136505 queued 08:20:37 Received message from Master: op=PointingHead serial=136518 08:20:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:20:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:20:38 Point started: ret=0 08:20:38 point_skyscan result=0 08:20:38 Check angles 08:20:38 SkyScan query 08:20:39 SkyScan query done: ret=0 az=153.255<-10217 ze=8.97<-11402 Statuses=0009 0009 08:20:39 Msec=0 True Az=153.255 Ze=8.97 Az status=0009 Ze status=0009 08:20:39 Check angles 08:20:39 SkyScan query 08:20:40 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.405<-12827 Statuses=0009 0009 08:20:40 Msec=750 True Az=135.315 Ze=-12.405 Az status=0009 Ze status=0009 08:20:40 Check angles 08:20:40 SkyScan query 08:20:40 SkyScan query done: ret=0 az=117.525<-7835 ze=-33.825<-14255 Statuses=0009 0009 08:20:40 Msec=1500 True Az=117.525 Ze=-33.825 Az status=0009 Ze status=0009 08:20:41 Check angles 08:20:41 SkyScan query 08:20:41 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.57<-15438 Statuses=0009 0009 08:20:41 Msec=2250 True Az=100.17 Ze=-51.57 Az status=0009 Ze status=0009 08:20:41 Check angles 08:20:41 SkyScan query 08:20:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 08:20:42 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 08:20:42 Check angles 08:20:42 SkyScan query 08:20:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:20:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:20:43 Message to Master queued w/err=0: serial=136518 error=0 08:20:48 Received message from Master: op=Filter serial=136519 08:20:48 Color wheel filter change from 0 to 0 08:20:48 FLIGetFilterPos err=0 currentPosition=0 08:20:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:48 Filter is already there-color wheel unchanged 08:20:48 Received message from Master: op=Shutter serial=136520 08:20:48 Shutter LASER close 08:20:48 Received message from Camera: op=State serial=136522 08:20:48 GetSingleValue result=40 Value=cccccccc 08:20:48 SkyScan query 08:20:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:20:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:48 Parameters OK 08:20:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:48 Set A/D data flow result=40 08:20:48 Set A/D channel type result=40 08:20:48 Set A/D encoding result=40 08:20:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:48 Set channel filter=0.000000e+000 result=40 08:20:48 Config A/D Result=40 08:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:48 Get A/D filter: -9.255963e+061 result=40 08:20:48 Get A/D value=-858993460 result=40 08:20:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:48 Parameters OK 08:20:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:48 Set A/D data flow result=40 08:20:48 Set A/D channel type result=40 08:20:48 Set A/D encoding result=40 08:20:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:48 Set channel filter=0.000000e+000 result=40 08:20:48 Config A/D Result=40 08:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:48 Get A/D filter: -9.255963e+061 result=40 08:20:48 Get A/D value=-858993460 result=40 08:20:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:48 Aux= 08:20:48 Message to Camera, serial 136522 queued 08:21:25 Received message from Master: op=PointingHead serial=136535 08:21:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:21:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:21:26 Point started: ret=0 08:21:26 point_skyscan result=0 08:21:26 Check angles 08:21:26 SkyScan query 08:21:27 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.36<-17424 Statuses=0009 0009 08:21:27 Msec=0 True Az=108.99 Ze=-81.36 Az status=0009 Ze status=0009 08:21:27 Check angles 08:21:27 SkyScan query 08:21:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.765<-18851 Statuses=0008 0009 08:21:28 Msec=750 True Az=112.995 Ze=-102.765 Az status=0008 Ze status=0009 08:21:28 Check angles 08:21:28 SkyScan query 08:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.125<-20275 Statuses=0008 0009 08:21:29 Msec=1500 True Az=112.995 Ze=-124.125 Az status=0008 Ze status=0009 08:21:29 Check angles 08:21:29 SkyScan query 08:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.545<-21703 Statuses=0008 0009 08:21:29 Msec=2250 True Az=112.995 Ze=-145.545 Az status=0008 Ze status=0009 08:21:30 Check angles 08:21:30 SkyScan query 08:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.485<-23099 Statuses=0008 0009 08:21:30 Msec=3000 True Az=112.995 Ze=-166.485 Az status=0008 Ze status=0009 08:21:30 Check angles 08:21:30 SkyScan query 08:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:21:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:21:31 Message to Master queued w/err=0: serial=136535 error=0 08:21:36 Received message from Master: op=Filter serial=136536 08:21:36 Color wheel filter change from 0 to 0 08:21:36 FLIGetFilterPos err=0 currentPosition=0 08:21:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:36 Filter is already there-color wheel unchanged 08:21:36 Received message from Master: op=Shutter serial=136537 08:21:36 Shutter LASER open 08:21:36 Received message from Camera: op=State serial=136539 08:21:36 GetSingleValue result=40 Value=cccccccc 08:21:36 SkyScan query 08:21:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:21:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:37 Parameters OK 08:21:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:37 Set A/D data flow result=40 08:21:37 Set A/D channel type result=40 08:21:37 Set A/D encoding result=40 08:21:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:37 Set channel filter=0.000000e+000 result=40 08:21:37 Config A/D Result=40 08:21:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:37 Get A/D filter: -9.255963e+061 result=40 08:21:37 Get A/D value=-858993460 result=40 08:21:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:37 Parameters OK 08:21:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:37 Set A/D data flow result=40 08:21:37 Set A/D channel type result=40 08:21:37 Set A/D encoding result=40 08:21:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:37 Set channel filter=0.000000e+000 result=40 08:21:37 Config A/D Result=40 08:21:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:37 Get A/D filter: -9.255963e+061 result=40 08:21:37 Get A/D value=-858993460 result=40 08:21:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:37 Aux= 08:21:37 Message to Camera, serial 136539 queued 08:21:45 Received message from Master: op=Shutter serial=136549 08:21:45 Shutter LASER close 08:21:46 Received message from Master: op=PointingHead serial=136553 08:21:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:21:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:21:46 Point started: ret=0 08:21:46 point_skyscan result=0 08:21:47 Check angles 08:21:47 SkyScan query 08:21:47 SkyScan query done: ret=0 az=89.64<-5976 ze=156.915<-1539 Statuses=0009 0009 08:21:47 Msec=0 True Az=89.64 Ze=156.915 Az status=0009 Ze status=0009 08:21:48 Check angles 08:21:48 SkyScan query 08:21:48 SkyScan query done: ret=0 az=71.79<-4786 ze=135.54<-2964 Statuses=0009 0009 08:21:48 Msec=750 True Az=71.79 Ze=135.54 Az status=0009 Ze status=0009 08:21:48 Check angles 08:21:48 SkyScan query 08:21:49 SkyScan query done: ret=0 az=54.375<-3625 ze=114.54<-4364 Statuses=0009 0009 08:21:49 Msec=1500 True Az=54.375 Ze=114.54 Az status=0009 Ze status=0009 08:21:49 Check angles 08:21:49 SkyScan query 08:21:50 SkyScan query done: ret=0 az=40.995<-2733 ze=93.615<-5759 Statuses=0009 0009 08:21:50 Msec=2250 True Az=40.995 Ze=93.615 Az status=0009 Ze status=0009 08:21:50 Check angles 08:21:50 SkyScan query 08:21:50 SkyScan query done: ret=0 az=40.995<-2733 ze=72.66<-7156 Statuses=0008 0009 08:21:50 Msec=3000 True Az=40.995 Ze=72.66 Az status=0008 Ze status=0009 08:21:51 Check angles 08:21:51 SkyScan query 08:21:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 08:21:51 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 08:21:51 Check angles 08:21:51 SkyScan query 08:21:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:21:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:21:52 Message to Master queued w/err=0: serial=136553 error=0 08:21:57 Received message from Master: op=Filter serial=136554 08:21:57 Color wheel filter change from 0 to 0 08:21:57 FLIGetFilterPos err=0 currentPosition=0 08:21:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:57 Filter is already there-color wheel unchanged 08:21:57 Received message from Master: op=Shutter serial=136555 08:21:57 Shutter LASER close 08:21:57 Received message from Camera: op=State serial=136557 08:21:57 GetSingleValue result=40 Value=cccccccc 08:21:57 SkyScan query 08:21:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:21:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:58 Parameters OK 08:21:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:58 Set A/D data flow result=40 08:21:58 Set A/D channel type result=40 08:21:58 Set A/D encoding result=40 08:21:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:58 Set channel filter=0.000000e+000 result=40 08:21:58 Config A/D Result=40 08:21:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:58 Get A/D filter: -9.255963e+061 result=40 08:21:58 Get A/D value=-858993460 result=40 08:21:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:58 Parameters OK 08:21:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:58 Set A/D data flow result=40 08:21:58 Set A/D channel type result=40 08:21:58 Set A/D encoding result=40 08:21:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:58 Set channel filter=0.000000e+000 result=40 08:21:58 Config A/D Result=40 08:21:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:58 Get A/D filter: -9.255963e+061 result=40 08:21:58 Get A/D value=-858993460 result=40 08:21:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:58 Aux= 08:21:58 Message to Camera, serial 136557 queued 08:22:35 Received message from Master: op=PointingHead serial=136570 08:22:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:22:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:22:35 Point started: ret=0 08:22:35 point_skyscan result=0 08:22:36 Check angles 08:22:36 SkyScan query 08:22:36 SkyScan query done: ret=0 az=64.335<-4289 ze=66.555<-7563 Statuses=0009 0008 08:22:36 Msec=0 True Az=64.335 Ze=66.555 Az status=0009 Ze status=0008 08:22:36 Check angles 08:22:36 SkyScan query 08:22:37 SkyScan query done: ret=0 az=81.75<-5450 ze=66.495<-7567 Statuses=0009 0008 08:22:37 Msec=750 True Az=81.75 Ze=66.495 Az status=0009 Ze status=0008 08:22:37 Check angles 08:22:37 SkyScan query 08:22:38 SkyScan query done: ret=0 az=99.63<-6642 ze=66.495<-7567 Statuses=0009 0008 08:22:38 Msec=1500 True Az=99.63 Ze=66.495 Az status=0009 Ze status=0008 08:22:38 Check angles 08:22:38 SkyScan query 08:22:39 SkyScan query done: ret=0 az=117.03<-7802 ze=66.495<-7567 Statuses=0009 0008 08:22:39 Msec=2250 True Az=117.03 Ze=66.495 Az status=0009 Ze status=0008 08:22:39 Check angles 08:22:39 SkyScan query 08:22:39 SkyScan query done: ret=0 az=134.55<-8970 ze=66.495<-7567 Statuses=0009 0008 08:22:39 Msec=3000 True Az=134.55 Ze=66.495 Az status=0009 Ze status=0008 08:22:39 Check angles 08:22:39 SkyScan query 08:22:40 SkyScan query done: ret=0 az=152.04<-10136 ze=66.495<-7567 Statuses=0009 0008 08:22:40 Msec=3750 True Az=152.04 Ze=66.495 Az status=0009 Ze status=0008 08:22:40 Check angles 08:22:40 SkyScan query 08:22:41 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:22:41 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:22:41 Message to Master queued w/err=0: serial=136570 error=0 08:22:46 Received message from Master: op=Filter serial=136571 08:22:46 Color wheel filter change from 0 to 0 08:22:46 FLIGetFilterPos err=0 currentPosition=0 08:22:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:46 Filter is already there-color wheel unchanged 08:22:46 Received message from Master: op=Shutter serial=136572 08:22:46 Shutter LASER close 08:22:46 Received message from Camera: op=State serial=136574 08:22:46 GetSingleValue result=40 Value=cccccccc 08:22:46 SkyScan query 08:22:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:22:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:47 Parameters OK 08:22:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:47 Set A/D data flow result=40 08:22:47 Set A/D channel type result=40 08:22:47 Set A/D encoding result=40 08:22:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:47 Set channel filter=0.000000e+000 result=40 08:22:47 Config A/D Result=40 08:22:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:47 Get A/D filter: -9.255963e+061 result=40 08:22:47 Get A/D value=-858993460 result=40 08:22:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:47 Parameters OK 08:22:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:47 Set A/D data flow result=40 08:22:47 Set A/D channel type result=40 08:22:47 Set A/D encoding result=40 08:22:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:47 Set channel filter=0.000000e+000 result=40 08:22:47 Config A/D Result=40 08:22:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:47 Get A/D filter: -9.255963e+061 result=40 08:22:47 Get A/D value=-858993460 result=40 08:22:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:47 Aux= 08:22:47 Message to Camera, serial 136574 queued 08:23:22 Received message from Master: op=PointingHead serial=136586 08:23:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:23:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:23:23 Point started: ret=0 08:23:23 point_skyscan result=0 08:23:24 Check angles 08:23:24 SkyScan query 08:23:24 SkyScan query done: ret=0 az=134.55<-8970 ze=36.495<-9567 Statuses=0009 0009 08:23:24 Msec=0 True Az=134.55 Ze=36.495 Az status=0009 Ze status=0009 08:23:24 Check angles 08:23:24 SkyScan query 08:23:25 SkyScan query done: ret=0 az=117.075<-7805 ze=15.48<-10968 Statuses=0009 0009 08:23:25 Msec=750 True Az=117.075 Ze=15.48 Az status=0009 Ze status=0009 08:23:25 Check angles 08:23:25 SkyScan query 08:23:26 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.445<-12363 Statuses=0009 0009 08:23:26 Msec=1500 True Az=99.795 Ze=-5.445 Az status=0009 Ze status=0009 08:23:26 Check angles 08:23:26 SkyScan query 08:23:26 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.4<-13760 Statuses=0009 0009 08:23:26 Msec=2250 True Az=82.26 Ze=-26.4 Az status=0009 Ze status=0009 08:23:27 Check angles 08:23:27 SkyScan query 08:23:27 SkyScan query done: ret=0 az=64.41<-4294 ze=-38.58<-14572 Statuses=0009 0008 08:23:27 Msec=3000 True Az=64.41 Ze=-38.58 Az status=0009 Ze status=0008 08:23:27 Check angles 08:23:27 SkyScan query 08:23:28 SkyScan query done: ret=0 az=46.62<-3108 ze=-38.52<-14568 Statuses=0009 0008 08:23:28 Msec=3750 True Az=46.62 Ze=-38.52 Az status=0009 Ze status=0008 08:23:28 Check angles 08:23:28 SkyScan query 08:23:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:23:29 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:23:29 Message to Master queued w/err=0: serial=136586 error=0 08:23:34 Received message from Master: op=Filter serial=136587 08:23:34 Color wheel filter change from 0 to 0 08:23:34 FLIGetFilterPos err=0 currentPosition=0 08:23:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:34 Filter is already there-color wheel unchanged 08:23:34 Received message from Master: op=Shutter serial=136588 08:23:34 Shutter LASER close 08:23:34 Received message from Camera: op=State serial=136590 08:23:34 GetSingleValue result=40 Value=cccccccc 08:23:34 SkyScan query 08:23:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:23:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:35 Parameters OK 08:23:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:35 Set A/D data flow result=40 08:23:35 Set A/D channel type result=40 08:23:35 Set A/D encoding result=40 08:23:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:35 Set channel filter=0.000000e+000 result=40 08:23:35 Config A/D Result=40 08:23:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:35 Get A/D filter: -9.255963e+061 result=40 08:23:35 Get A/D value=-858993460 result=40 08:23:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:35 Parameters OK 08:23:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:35 Set A/D data flow result=40 08:23:35 Set A/D channel type result=40 08:23:35 Set A/D encoding result=40 08:23:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:35 Set channel filter=0.000000e+000 result=40 08:23:35 Config A/D Result=40 08:23:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:35 Get A/D filter: -9.255963e+061 result=40 08:23:35 Get A/D value=-858993460 result=40 08:23:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:35 Aux= 08:23:35 Message to Camera, serial 136590 queued 08:24:11 Received message from Master: op=PointingHead serial=136603 08:24:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:24:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:24:12 Point started: ret=0 08:24:12 point_skyscan result=0 08:24:12 Check angles 08:24:12 SkyScan query 08:24:13 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.145<-16543 Statuses=0009 0009 08:24:13 Msec=0 True Az=63.87 Ze=-68.145 Az status=0009 Ze status=0009 08:24:13 Check angles 08:24:13 SkyScan query 08:24:14 SkyScan query done: ret=0 az=81.405<-5427 ze=-89.145<-17943 Statuses=0009 0009 08:24:14 Msec=750 True Az=81.405 Ze=-89.145 Az status=0009 Ze status=0009 08:24:14 Check angles 08:24:14 SkyScan query 08:24:15 SkyScan query done: ret=0 az=98.775<-6585 ze=-110.025<-19335 Statuses=0009 0009 08:24:15 Msec=1500 True Az=98.775 Ze=-110.025 Az status=0009 Ze status=0009 08:24:15 Check angles 08:24:15 SkyScan query 08:24:15 SkyScan query done: ret=0 az=116.22<-7748 ze=-131.01<-20734 Statuses=0009 0009 08:24:15 Msec=2250 True Az=116.22 Ze=-131.01 Az status=0009 Ze status=0009 08:24:15 Check angles 08:24:15 SkyScan query 08:24:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 08:24:16 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 08:24:16 Check angles 08:24:16 SkyScan query 08:24:17 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:24:17 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:24:17 Message to Master queued w/err=0: serial=136603 error=0 08:24:22 Received message from Master: op=Filter serial=136604 08:24:22 Color wheel filter change from 0 to 0 08:24:22 FLIGetFilterPos err=0 currentPosition=0 08:24:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:22 Filter is already there-color wheel unchanged 08:24:22 Received message from Master: op=Shutter serial=136605 08:24:22 Shutter LASER close 08:24:22 Received message from Camera: op=State serial=136607 08:24:22 GetSingleValue result=40 Value=cccccccc 08:24:22 SkyScan query 08:24:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:24:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:23 Parameters OK 08:24:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:23 Set A/D data flow result=40 08:24:23 Set A/D channel type result=40 08:24:23 Set A/D encoding result=40 08:24:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:23 Set channel filter=0.000000e+000 result=40 08:24:23 Config A/D Result=40 08:24:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:23 Get A/D filter: -9.255963e+061 result=40 08:24:23 Get A/D value=-858993460 result=40 08:24:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:23 Parameters OK 08:24:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:23 Set A/D data flow result=40 08:24:23 Set A/D channel type result=40 08:24:23 Set A/D encoding result=40 08:24:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:23 Set channel filter=0.000000e+000 result=40 08:24:23 Config A/D Result=40 08:24:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:23 Get A/D filter: -9.255963e+061 result=40 08:24:23 Get A/D value=-858993460 result=40 08:24:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:23 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:23 Aux= 08:24:23 Message to Camera, serial 136607 queued 08:24:59 Received message from Master: op=PointingHead serial=136620 08:24:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:24:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:25:00 Point started: ret=0 08:25:00 point_skyscan result=0 08:25:01 Check angles 08:25:01 SkyScan query 08:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.405<-23427 Statuses=0009 0009 08:25:01 Msec=0 True Az=112.995 Ze=-171.405 Az status=0009 Ze status=0009 08:25:01 Check angles 08:25:01 SkyScan query 08:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:25:02 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:25:02 Message to Master queued w/err=0: serial=136620 error=0 08:25:07 Received message from Master: op=Filter serial=136621 08:25:07 Color wheel filter change from 0 to 0 08:25:07 FLIGetFilterPos err=0 currentPosition=0 08:25:07 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:07 Filter is already there-color wheel unchanged 08:25:07 Received message from Master: op=Shutter serial=136622 08:25:07 Shutter LASER open 08:25:07 Received message from Camera: op=State serial=136624 08:25:07 GetSingleValue result=40 Value=cccccccc 08:25:07 SkyScan query 08:25:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:25:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:08 Parameters OK 08:25:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:08 Set A/D data flow result=40 08:25:08 Set A/D channel type result=40 08:25:08 Set A/D encoding result=40 08:25:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:08 Set channel filter=0.000000e+000 result=40 08:25:08 Config A/D Result=40 08:25:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:08 Get A/D filter: -9.255963e+061 result=40 08:25:08 Get A/D value=-858993460 result=40 08:25:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:08 Parameters OK 08:25:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:08 Set A/D data flow result=40 08:25:08 Set A/D channel type result=40 08:25:08 Set A/D encoding result=40 08:25:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:08 Set channel filter=0.000000e+000 result=40 08:25:08 Config A/D Result=40 08:25:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:08 Get A/D filter: -9.255963e+061 result=40 08:25:08 Get A/D value=-858993460 result=40 08:25:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:08 Aux= 08:25:08 Message to Camera, serial 136624 queued 08:25:16 Received message from Master: op=Shutter serial=136634 08:25:16 Shutter LASER close 08:25:17 Received message from Master: op=PointingHead serial=136638 08:25:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:25:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:25:17 Point started: ret=0 08:25:17 point_skyscan result=0 08:25:18 Check angles 08:25:18 SkyScan query 08:25:18 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.565<-21571 Statuses=0009 0009 08:25:18 Msec=0 True Az=135.705 Ze=-143.565 Az status=0009 Ze status=0009 08:25:19 Check angles 08:25:19 SkyScan query 08:25:19 SkyScan query done: ret=0 az=153.21<-10214 ze=-122.595<-20173 Statuses=0009 0009 08:25:19 Msec=750 True Az=153.21 Ze=-122.595 Az status=0009 Ze status=0009 08:25:19 Check angles 08:25:19 SkyScan query 08:25:20 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.73<-18782 Statuses=0009 0009 08:25:20 Msec=1500 True Az=170.775 Ze=-101.73 Az status=0009 Ze status=0009 08:25:20 Check angles 08:25:20 SkyScan query 08:25:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.685<-17379 Statuses=0008 0009 08:25:21 Msec=2250 True Az=176.01 Ze=-80.685 Az status=0008 Ze status=0009 08:25:21 Check angles 08:25:21 SkyScan query 08:25:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.745<-15983 Statuses=0008 0009 08:25:21 Msec=3000 True Az=176.01 Ze=-59.745 Az status=0008 Ze status=0009 08:25:22 Check angles 08:25:22 SkyScan query 08:25:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:25:22 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:25:22 Message to Master queued w/err=0: serial=136638 error=0 08:25:27 Received message from Master: op=Filter serial=136639 08:25:27 Color wheel filter change from 0 to 0 08:25:27 FLIGetFilterPos err=0 currentPosition=0 08:25:27 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:27 Filter is already there-color wheel unchanged 08:25:27 Received message from Master: op=Shutter serial=136640 08:25:27 Shutter LASER close 08:25:28 Received message from Camera: op=State serial=136642 08:25:28 GetSingleValue result=40 Value=cccccccc 08:25:28 SkyScan query 08:25:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:25:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:28 Parameters OK 08:25:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:28 Set A/D data flow result=40 08:25:28 Set A/D channel type result=40 08:25:28 Set A/D encoding result=40 08:25:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:28 Set channel filter=0.000000e+000 result=40 08:25:28 Config A/D Result=40 08:25:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:28 Get A/D filter: -9.255963e+061 result=40 08:25:28 Get A/D value=-858993460 result=40 08:25:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:28 Parameters OK 08:25:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:28 Set A/D data flow result=40 08:25:28 Set A/D channel type result=40 08:25:28 Set A/D encoding result=40 08:25:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:28 Set channel filter=0.000000e+000 result=40 08:25:28 Config A/D Result=40 08:25:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:28 Get A/D filter: -9.255963e+061 result=40 08:25:28 Get A/D value=-858993460 result=40 08:25:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:28 Aux= 08:25:28 Message to Camera, serial 136642 queued 08:26:04 Received message from Master: op=PointingHead serial=136654 08:26:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:26:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:26:04 Point started: ret=0 08:26:04 point_skyscan result=0 08:26:05 Check angles 08:26:05 SkyScan query 08:26:06 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.005<-13467 Statuses=0009 0009 08:26:06 Msec=0 True Az=153.225 Ze=-22.005 Az status=0009 Ze status=0009 08:26:06 Check angles 08:26:06 SkyScan query 08:26:06 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.02<-12068 Statuses=0009 0009 08:26:06 Msec=750 True Az=135.795 Ze=-1.02 Az status=0009 Ze status=0009 08:26:07 Check angles 08:26:07 SkyScan query [UTC 2018-12-14 08:26:07] 08:26:07 SkyScan query done: ret=0 az=118.185<-7879 ze=19.905<-10673 Statuses=0009 0009 08:26:07 Msec=1500 True Az=118.185 Ze=19.905 Az status=0009 Ze status=0009 08:26:07 Check angles 08:26:07 SkyScan query 08:26:08 SkyScan query done: ret=0 az=100.8<-6720 ze=40.875<-9275 Statuses=0009 0009 08:26:08 Msec=2250 True Az=100.8 Ze=40.875 Az status=0009 Ze status=0009 08:26:08 Check angles 08:26:08 SkyScan query 08:26:09 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 08:26:09 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 08:26:09 Check angles 08:26:09 SkyScan query 08:26:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 08:26:09 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 08:26:09 Message to Master queued w/err=0: serial=136654 error=0 08:26:14 Received message from Master: op=Filter serial=136655 08:26:14 Color wheel filter change from 0 to 0 08:26:14 FLIGetFilterPos err=0 currentPosition=0 08:26:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:14 Filter is already there-color wheel unchanged 08:26:15 Received message from Master: op=Shutter serial=136656 08:26:15 Shutter LASER close 08:26:15 Received message from Camera: op=State serial=136658 08:26:15 GetSingleValue result=40 Value=cccccccc 08:26:15 SkyScan query 08:26:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:26:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:15 Parameters OK 08:26:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:15 Set A/D data flow result=40 08:26:15 Set A/D channel type result=40 08:26:15 Set A/D encoding result=40 08:26:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:15 Set channel filter=0.000000e+000 result=40 08:26:15 Config A/D Result=40 08:26:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:15 Get A/D filter: -9.255963e+061 result=40 08:26:15 Get A/D value=-858993460 result=40 08:26:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:15 Parameters OK 08:26:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:15 Set A/D data flow result=40 08:26:15 Set A/D channel type result=40 08:26:15 Set A/D encoding result=40 08:26:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:15 Set channel filter=0.000000e+000 result=40 08:26:15 Config A/D Result=40 08:26:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:15 Get A/D filter: -9.255963e+061 result=40 08:26:15 Get A/D value=-858993460 result=40 08:26:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:15 Aux= 08:26:15 Message to Camera, serial 136658 queued 08:26:52 Received message from Master: op=PointingHead serial=136671 08:26:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:26:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:26:52 Point started: ret=0 08:26:52 point_skyscan result=0 08:26:53 Check angles 08:26:53 SkyScan query 08:26:54 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 08:26:54 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 08:26:54 Check angles 08:26:54 SkyScan query 08:26:55 SkyScan query done: ret=0 az=126.555<-8437 ze=38.505<-9433 Statuses=0009 0008 08:26:55 Msec=750 True Az=126.555 Ze=38.505 Az status=0009 Ze status=0008 08:26:55 Check angles 08:26:55 SkyScan query 08:26:55 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 08:26:55 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 08:26:55 Check angles 08:26:55 SkyScan query 08:26:56 SkyScan query done: ret=0 az=161.445<-10763 ze=38.505<-9433 Statuses=0009 0008 08:26:56 Msec=2250 True Az=161.445 Ze=38.505 Az status=0009 Ze status=0008 08:26:56 Check angles 08:26:56 SkyScan query 08:26:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:26:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:26:57 Check angles 08:26:57 SkyScan query 08:26:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:26:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:26:58 Message to Master queued w/err=0: serial=136671 error=0 08:27:03 Received message from Master: op=Filter serial=136672 08:27:03 Color wheel filter change from 0 to 0 08:27:03 FLIGetFilterPos err=0 currentPosition=0 08:27:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:03 Filter is already there-color wheel unchanged 08:27:03 Received message from Master: op=Shutter serial=136673 08:27:03 Shutter LASER close 08:27:03 Received message from Camera: op=State serial=136675 08:27:03 GetSingleValue result=40 Value=cccccccc 08:27:03 SkyScan query 08:27:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:27:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:03 Parameters OK 08:27:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:03 Set A/D data flow result=40 08:27:03 Set A/D channel type result=40 08:27:03 Set A/D encoding result=40 08:27:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:03 Set channel filter=0.000000e+000 result=40 08:27:03 Config A/D Result=40 08:27:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:03 Get A/D filter: -9.255963e+061 result=40 08:27:03 Get A/D value=-858993460 result=40 08:27:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:03 Parameters OK 08:27:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:03 Set A/D data flow result=40 08:27:03 Set A/D channel type result=40 08:27:03 Set A/D encoding result=40 08:27:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:03 Set channel filter=0.000000e+000 result=40 08:27:03 Config A/D Result=40 08:27:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:03 Get A/D filter: -9.255963e+061 result=40 08:27:03 Get A/D value=-858993460 result=40 08:27:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:03 Aux= 08:27:03 Message to Camera, serial 136675 queued 08:27:40 Received message from Master: op=PointingHead serial=136688 08:27:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:27:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:27:41 Point started: ret=0 08:27:41 point_skyscan result=0 08:27:41 Check angles 08:27:41 SkyScan query 08:27:42 SkyScan query done: ret=0 az=152.805<-10187 ze=8.355<-11443 Statuses=0009 0009 08:27:42 Msec=0 True Az=152.805 Ze=8.355 Az status=0009 Ze status=0009 08:27:42 Check angles 08:27:42 SkyScan query 08:27:43 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.54<-12836 Statuses=0009 0009 08:27:43 Msec=750 True Az=135.24 Ze=-12.54 Az status=0009 Ze status=0009 08:27:43 Check angles 08:27:43 SkyScan query 08:27:43 SkyScan query done: ret=0 az=117.735<-7849 ze=-33.525<-14235 Statuses=0009 0009 08:27:43 Msec=1500 True Az=117.735 Ze=-33.525 Az status=0009 Ze status=0009 08:27:44 Check angles 08:27:44 SkyScan query 08:27:44 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.555<-15437 Statuses=0009 0009 08:27:44 Msec=2250 True Az=100.38 Ze=-51.555 Az status=0009 Ze status=0009 08:27:44 Check angles 08:27:44 SkyScan query 08:27:45 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 08:27:45 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 08:27:45 Check angles 08:27:45 SkyScan query 08:27:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:27:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:27:46 Message to Master queued w/err=0: serial=136688 error=0 08:27:51 Received message from Master: op=Filter serial=136689 08:27:51 Color wheel filter change from 0 to 0 08:27:51 FLIGetFilterPos err=0 currentPosition=0 08:27:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:51 Filter is already there-color wheel unchanged 08:27:51 Received message from Master: op=Shutter serial=136690 08:27:51 Shutter LASER close 08:27:51 Received message from Camera: op=State serial=136692 08:27:51 GetSingleValue result=40 Value=cccccccc 08:27:51 SkyScan query 08:27:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:27:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:51 Parameters OK 08:27:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:51 Set A/D data flow result=40 08:27:51 Set A/D channel type result=40 08:27:51 Set A/D encoding result=40 08:27:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:51 Set channel filter=0.000000e+000 result=40 08:27:51 Config A/D Result=40 08:27:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:51 Get A/D filter: -9.255963e+061 result=40 08:27:51 Get A/D value=-858993460 result=40 08:27:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:51 Parameters OK 08:27:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:51 Set A/D data flow result=40 08:27:51 Set A/D channel type result=40 08:27:51 Set A/D encoding result=40 08:27:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:51 Set channel filter=0.000000e+000 result=40 08:27:51 Config A/D Result=40 08:27:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:51 Get A/D filter: -9.255963e+061 result=40 08:27:51 Get A/D value=-858993460 result=40 08:27:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:51 Aux= 08:27:51 Message to Camera, serial 136692 queued 08:28:28 Received message from Master: op=PointingHead serial=136705 08:28:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:28:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:28:29 Point started: ret=0 08:28:29 point_skyscan result=0 08:28:29 Check angles 08:28:29 SkyScan query 08:28:30 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.42<-17428 Statuses=0009 0009 08:28:30 Msec=0 True Az=109.125 Ze=-81.42 Az status=0009 Ze status=0009 08:28:30 Check angles 08:28:30 SkyScan query 08:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.825<-18855 Statuses=0008 0009 08:28:31 Msec=750 True Az=112.995 Ze=-102.825 Az status=0008 Ze status=0009 08:28:31 Check angles 08:28:31 SkyScan query 08:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.765<-20251 Statuses=0008 0009 08:28:31 Msec=1500 True Az=112.995 Ze=-123.765 Az status=0008 Ze status=0009 08:28:32 Check angles 08:28:32 SkyScan query 08:28:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.14<-21676 Statuses=0008 0009 08:28:32 Msec=2250 True Az=112.995 Ze=-145.14 Az status=0008 Ze status=0009 08:28:32 Check angles 08:28:32 SkyScan query 08:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.56<-23104 Statuses=0008 0009 08:28:33 Msec=3000 True Az=112.995 Ze=-166.56 Az status=0008 Ze status=0009 08:28:33 Check angles 08:28:33 SkyScan query 08:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:28:34 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:28:34 Message to Master queued w/err=0: serial=136705 error=0 08:28:39 Received message from Master: op=Filter serial=136706 08:28:39 Color wheel filter change from 0 to 0 08:28:39 FLIGetFilterPos err=0 currentPosition=0 08:28:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:39 Filter is already there-color wheel unchanged 08:28:39 Received message from Master: op=Shutter serial=136707 08:28:39 Shutter LASER open 08:28:39 Received message from Camera: op=State serial=136709 08:28:39 GetSingleValue result=40 Value=cccccccc 08:28:39 SkyScan query 08:28:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:28:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:40 Parameters OK 08:28:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:40 Set A/D data flow result=40 08:28:40 Set A/D channel type result=40 08:28:40 Set A/D encoding result=40 08:28:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:40 Set channel filter=0.000000e+000 result=40 08:28:40 Config A/D Result=40 08:28:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:40 Get A/D filter: -9.255963e+061 result=40 08:28:40 Get A/D value=-858993460 result=40 08:28:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:40 Parameters OK 08:28:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:40 Set A/D data flow result=40 08:28:40 Set A/D channel type result=40 08:28:40 Set A/D encoding result=40 08:28:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:40 Set channel filter=0.000000e+000 result=40 08:28:40 Config A/D Result=40 08:28:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:40 Get A/D filter: -9.255963e+061 result=40 08:28:40 Get A/D value=-858993460 result=40 08:28:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:40 Aux= 08:28:40 Message to Camera, serial 136709 queued 08:28:48 Received message from Master: op=Shutter serial=136719 08:28:48 Shutter LASER close 08:28:49 Received message from Master: op=PointingHead serial=136723 08:28:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:28:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:28:49 Point started: ret=0 08:28:49 point_skyscan result=0 08:28:50 Check angles 08:28:50 SkyScan query 08:28:50 SkyScan query done: ret=0 az=89.37<-5958 ze=156.84<-1544 Statuses=0009 0009 08:28:50 Msec=0 True Az=89.37 Ze=156.84 Az status=0009 Ze status=0009 08:28:50 Check angles 08:28:50 SkyScan query 08:28:51 SkyScan query done: ret=0 az=71.955<-4797 ze=135.9<-2940 Statuses=0009 0009 08:28:51 Msec=750 True Az=71.955 Ze=135.9 Az status=0009 Ze status=0009 08:28:51 Check angles 08:28:51 SkyScan query 08:28:52 SkyScan query done: ret=0 az=54.54<-3636 ze=114.93<-4338 Statuses=0009 0009 08:28:52 Msec=1500 True Az=54.54 Ze=114.93 Az status=0009 Ze status=0009 08:28:52 Check angles 08:28:52 SkyScan query 08:28:52 SkyScan query done: ret=0 az=40.98<-2732 ze=93.945<-5737 Statuses=0009 0009 08:28:52 Msec=2250 True Az=40.98 Ze=93.945 Az status=0009 Ze status=0009 08:28:53 Check angles 08:28:53 SkyScan query 08:28:53 SkyScan query done: ret=0 az=40.995<-2733 ze=72.99<-7134 Statuses=0008 0009 08:28:53 Msec=3000 True Az=40.995 Ze=72.99 Az status=0008 Ze status=0009 08:28:53 Check angles 08:28:53 SkyScan query 08:28:54 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 08:28:54 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 08:28:54 Check angles 08:28:54 SkyScan query 08:28:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:28:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:28:55 Message to Master queued w/err=0: serial=136723 error=0 08:29:00 Received message from Master: op=Filter serial=136724 08:29:00 Color wheel filter change from 0 to 0 08:29:00 FLIGetFilterPos err=0 currentPosition=0 08:29:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:00 Filter is already there-color wheel unchanged 08:29:00 Received message from Master: op=Shutter serial=136725 08:29:00 Shutter LASER close 08:29:00 Received message from Camera: op=State serial=136727 08:29:00 GetSingleValue result=40 Value=cccccccc 08:29:00 SkyScan query 08:29:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:29:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:01 Parameters OK 08:29:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:01 Set A/D data flow result=40 08:29:01 Set A/D channel type result=40 08:29:01 Set A/D encoding result=40 08:29:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:01 Set channel filter=0.000000e+000 result=40 08:29:01 Config A/D Result=40 08:29:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:01 Get A/D filter: -9.255963e+061 result=40 08:29:01 Get A/D value=-858993460 result=40 08:29:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:01 Parameters OK 08:29:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:01 Set A/D data flow result=40 08:29:01 Set A/D channel type result=40 08:29:01 Set A/D encoding result=40 08:29:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:01 Set channel filter=0.000000e+000 result=40 08:29:01 Config A/D Result=40 08:29:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:01 Get A/D filter: -9.255963e+061 result=40 08:29:01 Get A/D value=-858993460 result=40 08:29:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:01 Aux= 08:29:01 Message to Camera, serial 136727 queued 08:29:37 Received message from Master: op=PointingHead serial=136740 08:29:37 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:29:37 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:29:38 Point started: ret=0 08:29:38 point_skyscan result=0 08:29:39 Check angles 08:29:39 SkyScan query 08:29:39 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 08:29:39 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 08:29:39 Check angles 08:29:39 SkyScan query 08:29:40 SkyScan query done: ret=0 az=81.87<-5458 ze=66.495<-7567 Statuses=0009 0008 08:29:40 Msec=750 True Az=81.87 Ze=66.495 Az status=0009 Ze status=0008 08:29:40 Check angles 08:29:40 SkyScan query 08:29:41 SkyScan query done: ret=0 az=99.75<-6650 ze=66.495<-7567 Statuses=0009 0008 08:29:41 Msec=1500 True Az=99.75 Ze=66.495 Az status=0009 Ze status=0008 08:29:41 Check angles 08:29:41 SkyScan query 08:29:41 SkyScan query done: ret=0 az=117.3<-7820 ze=66.495<-7567 Statuses=0009 0008 08:29:41 Msec=2250 True Az=117.3 Ze=66.495 Az status=0009 Ze status=0008 08:29:42 Check angles 08:29:42 SkyScan query 08:29:42 SkyScan query done: ret=0 az=135.09<-9006 ze=66.495<-7567 Statuses=0009 0008 08:29:42 Msec=3000 True Az=135.09 Ze=66.495 Az status=0009 Ze status=0008 08:29:42 Check angles 08:29:42 SkyScan query 08:29:43 SkyScan query done: ret=0 az=152.88<-10192 ze=66.495<-7567 Statuses=0009 0008 08:29:43 Msec=3750 True Az=152.88 Ze=66.495 Az status=0009 Ze status=0008 08:29:43 Check angles 08:29:43 SkyScan query 08:29:44 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:29:44 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:29:44 Message to Master queued w/err=0: serial=136740 error=0 08:29:49 Received message from Master: op=Filter serial=136741 08:29:49 Color wheel filter change from 0 to 0 08:29:49 FLIGetFilterPos err=0 currentPosition=0 08:29:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:49 Filter is already there-color wheel unchanged 08:29:49 Received message from Master: op=Shutter serial=136742 08:29:49 Shutter LASER close 08:29:49 Received message from Camera: op=State serial=136744 08:29:49 GetSingleValue result=40 Value=cccccccc 08:29:49 SkyScan query 08:29:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:29:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:50 Parameters OK 08:29:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:50 Set A/D data flow result=40 08:29:50 Set A/D channel type result=40 08:29:50 Set A/D encoding result=40 08:29:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:50 Set channel filter=0.000000e+000 result=40 08:29:50 Config A/D Result=40 08:29:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:50 Get A/D filter: -9.255963e+061 result=40 08:29:50 Get A/D value=-858993460 result=40 08:29:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:50 Parameters OK 08:29:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:50 Set A/D data flow result=40 08:29:50 Set A/D channel type result=40 08:29:50 Set A/D encoding result=40 08:29:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:50 Set channel filter=0.000000e+000 result=40 08:29:50 Config A/D Result=40 08:29:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:50 Get A/D filter: -9.255963e+061 result=40 08:29:50 Get A/D value=-858993460 result=40 08:29:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:50 Aux= 08:29:50 Message to Camera, serial 136744 queued 08:30:26 Received message from Master: op=PointingHead serial=136757 08:30:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:30:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:30:27 Point started: ret=0 08:30:27 point_skyscan result=0 08:30:27 Check angles 08:30:27 SkyScan query 08:30:28 SkyScan query done: ret=0 az=135.105<-9007 ze=36.84<-9544 Statuses=0009 0009 08:30:28 Msec=0 True Az=135.105 Ze=36.84 Az status=0009 Ze status=0009 08:30:28 Check angles 08:30:28 SkyScan query 08:30:29 SkyScan query done: ret=0 az=117.57<-7838 ze=15.885<-10941 Statuses=0009 0009 08:30:29 Msec=750 True Az=117.57 Ze=15.885 Az status=0009 Ze status=0009 08:30:29 Check angles 08:30:29 SkyScan query 08:30:30 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.07<-12338 Statuses=0009 0009 08:30:30 Msec=1500 True Az=100.2 Ze=-5.07 Az status=0009 Ze status=0009 08:30:30 Check angles 08:30:30 SkyScan query 08:30:30 SkyScan query done: ret=0 az=82.71<-5514 ze=-26.025<-13735 Statuses=0009 0009 08:30:30 Msec=2250 True Az=82.71 Ze=-26.025 Az status=0009 Ze status=0009 08:30:30 Check angles 08:30:30 SkyScan query 08:30:31 SkyScan query done: ret=0 az=65.25<-4350 ze=-38.58<-14572 Statuses=0009 0008 08:30:31 Msec=3000 True Az=65.25 Ze=-38.58 Az status=0009 Ze status=0008 08:30:31 Check angles 08:30:31 SkyScan query 08:30:32 SkyScan query done: ret=0 az=47.745<-3183 ze=-38.52<-14568 Statuses=0009 0008 08:30:32 Msec=3750 True Az=47.745 Ze=-38.52 Az status=0009 Ze status=0008 08:30:32 Check angles 08:30:32 SkyScan query 08:30:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:30:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:30:33 Message to Master queued w/err=0: serial=136757 error=0 08:30:38 Received message from Master: op=Filter serial=136758 08:30:38 Color wheel filter change from 0 to 0 08:30:38 FLIGetFilterPos err=0 currentPosition=0 08:30:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:38 Filter is already there-color wheel unchanged 08:30:38 Received message from Master: op=Shutter serial=136759 08:30:38 Shutter LASER close 08:30:38 Received message from Camera: op=State serial=136761 08:30:38 GetSingleValue result=40 Value=cccccccc 08:30:38 SkyScan query 08:30:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:30:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:38 Parameters OK 08:30:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:38 Set A/D data flow result=40 08:30:38 Set A/D channel type result=40 08:30:38 Set A/D encoding result=40 08:30:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:38 Set channel filter=0.000000e+000 result=40 08:30:38 Config A/D Result=40 08:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:38 Get A/D filter: -9.255963e+061 result=40 08:30:38 Get A/D value=-858993460 result=40 08:30:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:38 Parameters OK 08:30:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:38 Set A/D data flow result=40 08:30:38 Set A/D channel type result=40 08:30:38 Set A/D encoding result=40 08:30:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:38 Set channel filter=0.000000e+000 result=40 08:30:38 Config A/D Result=40 08:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:38 Get A/D filter: -9.255963e+061 result=40 08:30:38 Get A/D value=-858993460 result=40 08:30:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:38 Aux= 08:30:38 Message to Camera, serial 136761 queued 08:31:14 Received message from Master: op=PointingHead serial=136773 08:31:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:31:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:31:15 Point started: ret=0 08:31:15 point_skyscan result=0 08:31:15 Check angles 08:31:15 SkyScan query 08:31:16 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.13<-16542 Statuses=0009 0009 08:31:16 Msec=0 True Az=63.87 Ze=-68.13 Az status=0009 Ze status=0009 08:31:16 Check angles 08:31:16 SkyScan query 08:31:17 SkyScan query done: ret=0 az=81.405<-5427 ze=-89.115<-17941 Statuses=0009 0009 08:31:17 Msec=750 True Az=81.405 Ze=-89.115 Az status=0009 Ze status=0009 08:31:17 Check angles 08:31:17 SkyScan query 08:31:17 SkyScan query done: ret=0 az=98.775<-6585 ze=-110.025<-19335 Statuses=0009 0009 08:31:17 Msec=1500 True Az=98.775 Ze=-110.025 Az status=0009 Ze status=0009 08:31:18 Check angles 08:31:18 SkyScan query 08:31:18 SkyScan query done: ret=0 az=116.295<-7753 ze=-131.01<-20734 Statuses=0009 0009 08:31:18 Msec=2250 True Az=116.295 Ze=-131.01 Az status=0009 Ze status=0009 08:31:18 Check angles 08:31:18 SkyScan query 08:31:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 08:31:19 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 08:31:19 Check angles 08:31:19 SkyScan query 08:31:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:31:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:31:20 Message to Master queued w/err=0: serial=136773 error=0 08:31:25 Received message from Master: op=Filter serial=136774 08:31:25 Color wheel filter change from 0 to 0 08:31:25 FLIGetFilterPos err=0 currentPosition=0 08:31:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:25 Filter is already there-color wheel unchanged 08:31:25 Received message from Master: op=Shutter serial=136775 08:31:25 Shutter LASER close 08:31:25 Received message from Camera: op=State serial=136777 08:31:25 GetSingleValue result=40 Value=cccccccc 08:31:25 SkyScan query 08:31:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:31:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:25 Parameters OK 08:31:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:25 Set A/D data flow result=40 08:31:25 Set A/D channel type result=40 08:31:25 Set A/D encoding result=40 08:31:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:25 Set channel filter=0.000000e+000 result=40 08:31:25 Config A/D Result=40 08:31:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:25 Get A/D filter: -9.255963e+061 result=40 08:31:25 Get A/D value=-858993460 result=40 08:31:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:25 Parameters OK 08:31:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:25 Set A/D data flow result=40 08:31:25 Set A/D channel type result=40 08:31:25 Set A/D encoding result=40 08:31:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:25 Set channel filter=0.000000e+000 result=40 08:31:25 Config A/D Result=40 08:31:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:25 Get A/D filter: -9.255963e+061 result=40 08:31:25 Get A/D value=-858993460 result=40 08:31:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:25 Aux= 08:31:25 Message to Camera, serial 136777 queued 08:32:02 Received message from Master: op=PointingHead serial=136790 08:32:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:32:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:32:03 Point started: ret=0 08:32:03 point_skyscan result=0 08:32:03 Check angles 08:32:03 SkyScan query 08:32:04 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.88<-23392 Statuses=0009 0009 08:32:04 Msec=0 True Az=113.01 Ze=-170.88 Az status=0009 Ze status=0009 08:32:04 Check angles 08:32:04 SkyScan query 08:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:32:05 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:32:05 Message to Master queued w/err=0: serial=136790 error=0 08:32:10 Received message from Master: op=Filter serial=136791 08:32:10 Color wheel filter change from 0 to 0 08:32:10 FLIGetFilterPos err=0 currentPosition=0 08:32:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:10 Filter is already there-color wheel unchanged 08:32:10 Received message from Master: op=Shutter serial=136792 08:32:10 Shutter LASER open 08:32:10 Received message from Camera: op=State serial=136794 08:32:10 GetSingleValue result=40 Value=cccccccc 08:32:10 SkyScan query 08:32:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:32:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:11 Parameters OK 08:32:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:11 Set A/D data flow result=40 08:32:11 Set A/D channel type result=40 08:32:11 Set A/D encoding result=40 08:32:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:11 Set channel filter=0.000000e+000 result=40 08:32:11 Config A/D Result=40 08:32:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:11 Get A/D filter: -9.255963e+061 result=40 08:32:11 Get A/D value=-858993460 result=40 08:32:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:11 Parameters OK 08:32:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:11 Set A/D data flow result=40 08:32:11 Set A/D channel type result=40 08:32:11 Set A/D encoding result=40 08:32:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:11 Set channel filter=0.000000e+000 result=40 08:32:11 Config A/D Result=40 08:32:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:11 Get A/D filter: -9.255963e+061 result=40 08:32:11 Get A/D value=-858993460 result=40 08:32:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:11 Aux= 08:32:11 Message to Camera, serial 136794 queued 08:32:19 Received message from Master: op=Shutter serial=136804 08:32:19 Shutter LASER close 08:32:20 Received message from Master: op=PointingHead serial=136808 08:32:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:32:20 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:32:20 Point started: ret=0 08:32:20 point_skyscan result=0 08:32:21 Check angles 08:32:21 SkyScan query 08:32:21 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.295<-21553 Statuses=0009 0009 08:32:21 Msec=0 True Az=135.945 Ze=-143.295 Az status=0009 Ze status=0009 08:32:21 Check angles 08:32:21 SkyScan query 08:32:22 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.875<-20125 Statuses=0009 0009 08:32:22 Msec=750 True Az=153.81 Ze=-121.875 Az status=0009 Ze status=0009 08:32:22 Check angles 08:32:22 SkyScan query 08:32:23 SkyScan query done: ret=0 az=171.735<-11449 ze=-100.44<-18696 Statuses=0009 0009 08:32:23 Msec=1500 True Az=171.735 Ze=-100.44 Az status=0009 Ze status=0009 08:32:23 Check angles 08:32:23 SkyScan query 08:32:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.515<-17301 Statuses=0008 0009 08:32:24 Msec=2250 True Az=176.01 Ze=-79.515 Az status=0008 Ze status=0009 08:32:24 Check angles 08:32:24 SkyScan query 08:32:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.575<-15905 Statuses=0008 0009 08:32:24 Msec=3000 True Az=176.01 Ze=-58.575 Az status=0008 Ze status=0009 08:32:24 Check angles 08:32:24 SkyScan query 08:32:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:32:25 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:32:25 Message to Master queued w/err=0: serial=136808 error=0 08:32:30 Received message from Master: op=Filter serial=136809 08:32:30 Color wheel filter change from 0 to 0 08:32:30 FLIGetFilterPos err=0 currentPosition=0 08:32:30 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:30 Filter is already there-color wheel unchanged 08:32:30 Received message from Master: op=Shutter serial=136810 08:32:30 Shutter LASER close 08:32:30 Received message from Camera: op=State serial=136812 08:32:30 GetSingleValue result=40 Value=cccccccc 08:32:30 SkyScan query 08:32:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:32:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:31 Parameters OK 08:32:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:31 Set A/D data flow result=40 08:32:31 Set A/D channel type result=40 08:32:31 Set A/D encoding result=40 08:32:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:31 Set channel filter=0.000000e+000 result=40 08:32:31 Config A/D Result=40 08:32:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:31 Get A/D filter: -9.255963e+061 result=40 08:32:31 Get A/D value=-858993460 result=40 08:32:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:31 Parameters OK 08:32:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:31 Set A/D data flow result=40 08:32:31 Set A/D channel type result=40 08:32:31 Set A/D encoding result=40 08:32:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:31 Set channel filter=0.000000e+000 result=40 08:32:31 Config A/D Result=40 08:32:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:31 Get A/D filter: -9.255963e+061 result=40 08:32:31 Get A/D value=-858993460 result=40 08:32:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:31 Aux= 08:32:31 Message to Camera, serial 136812 queued 08:33:08 Received message from Master: op=PointingHead serial=136825 08:33:08 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:33:08 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:33:08 Point started: ret=0 08:33:08 point_skyscan result=0 08:33:09 Check angles 08:33:09 SkyScan query 08:33:09 SkyScan query done: ret=0 az=153.075<-10205 ze=-21.87<-13458 Statuses=0009 0009 08:33:09 Msec=0 True Az=153.075 Ze=-21.87 Az status=0009 Ze status=0009 08:33:10 Check angles 08:33:10 SkyScan query 08:33:10 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.855<-12057 Statuses=0009 0009 08:33:10 Msec=750 True Az=135.615 Ze=-0.855 Az status=0009 Ze status=0009 08:33:10 Check angles 08:33:10 SkyScan query 08:33:11 SkyScan query done: ret=0 az=117.765<-7851 ze=20.52<-10632 Statuses=0009 0009 08:33:11 Msec=1500 True Az=117.765 Ze=20.52 Az status=0009 Ze status=0009 08:33:11 Check angles 08:33:11 SkyScan query 08:33:12 SkyScan query done: ret=0 az=100.275<-6685 ze=41.49<-9234 Statuses=0009 0009 08:33:12 Msec=2250 True Az=100.275 Ze=41.49 Az status=0009 Ze status=0009 08:33:12 Check angles 08:33:12 SkyScan query 08:33:13 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 08:33:13 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 08:33:13 Check angles 08:33:13 SkyScan query 08:33:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:33:13 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:33:13 Message to Master queued w/err=0: serial=136825 error=0 08:33:18 Received message from Master: op=Filter serial=136826 08:33:18 Color wheel filter change from 0 to 0 08:33:18 FLIGetFilterPos err=0 currentPosition=0 08:33:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:18 Filter is already there-color wheel unchanged 08:33:18 Received message from Master: op=Shutter serial=136827 08:33:18 Shutter LASER close 08:33:18 Received message from Camera: op=State serial=136829 08:33:18 GetSingleValue result=40 Value=cccccccc 08:33:18 SkyScan query 08:33:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:33:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:19 Parameters OK 08:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:19 Set A/D data flow result=40 08:33:19 Set A/D channel type result=40 08:33:19 Set A/D encoding result=40 08:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:19 Set channel filter=0.000000e+000 result=40 08:33:19 Config A/D Result=40 08:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:19 Get A/D filter: -9.255963e+061 result=40 08:33:19 Get A/D value=-858993460 result=40 08:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:19 Parameters OK 08:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:19 Set A/D data flow result=40 08:33:19 Set A/D channel type result=40 08:33:19 Set A/D encoding result=40 08:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:19 Set channel filter=0.000000e+000 result=40 08:33:19 Config A/D Result=40 08:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:19 Get A/D filter: -9.255963e+061 result=40 08:33:19 Get A/D value=-858993460 result=40 08:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:19 Aux= 08:33:19 Message to Camera, serial 136829 queued 08:33:56 Received message from Master: op=PointingHead serial=136842 08:33:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:33:56 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:33:56 Point started: ret=0 08:33:56 point_skyscan result=0 08:33:57 Check angles 08:33:57 SkyScan query 08:33:58 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 08:33:58 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 08:33:58 Check angles 08:33:58 SkyScan query 08:33:58 SkyScan query done: ret=0 az=126.945<-8463 ze=38.505<-9433 Statuses=0009 0008 08:33:58 Msec=750 True Az=126.945 Ze=38.505 Az status=0009 Ze status=0008 08:33:59 Check angles 08:33:59 SkyScan query 08:33:59 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 08:33:59 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 08:33:59 Check angles 08:33:59 SkyScan query 08:34:00 SkyScan query done: ret=0 az=161.895<-10793 ze=38.505<-9433 Statuses=0009 0008 08:34:00 Msec=2250 True Az=161.895 Ze=38.505 Az status=0009 Ze status=0008 08:34:00 Check angles 08:34:00 SkyScan query 08:34:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 08:34:01 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 08:34:01 Check angles 08:34:01 SkyScan query 08:34:01 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:34:01 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:34:01 Message to Master queued w/err=0: serial=136842 error=0 08:34:06 Received message from Master: op=Filter serial=136843 08:34:06 Color wheel filter change from 0 to 0 08:34:06 FLIGetFilterPos err=0 currentPosition=0 08:34:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:06 Filter is already there-color wheel unchanged 08:34:07 Received message from Master: op=Shutter serial=136844 08:34:07 Shutter LASER close 08:34:07 Received message from Camera: op=State serial=136846 08:34:07 GetSingleValue result=40 Value=cccccccc 08:34:07 SkyScan query 08:34:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:34:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:07 Parameters OK 08:34:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:07 Set A/D data flow result=40 08:34:07 Set A/D channel type result=40 08:34:07 Set A/D encoding result=40 08:34:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:07 Set channel filter=0.000000e+000 result=40 08:34:07 Config A/D Result=40 08:34:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:07 Get A/D filter: -9.255963e+061 result=40 08:34:07 Get A/D value=-858993460 result=40 08:34:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:07 Parameters OK 08:34:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:07 Set A/D data flow result=40 08:34:07 Set A/D channel type result=40 08:34:07 Set A/D encoding result=40 08:34:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:07 Set channel filter=0.000000e+000 result=40 08:34:07 Config A/D Result=40 08:34:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:07 Get A/D filter: -9.255963e+061 result=40 08:34:07 Get A/D value=-858993460 result=40 08:34:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:07 Aux= 08:34:07 Message to Camera, serial 136846 queued 08:34:44 Received message from Master: op=PointingHead serial=136859 08:34:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:34:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:34:44 Point started: ret=0 08:34:44 point_skyscan result=0 08:34:45 Check angles 08:34:45 SkyScan query 08:34:46 SkyScan query done: ret=0 az=152.91<-10194 ze=8.625<-11425 Statuses=0009 0009 08:34:46 Msec=0 True Az=152.91 Ze=8.625 Az status=0009 Ze status=0009 08:34:46 Check angles 08:34:46 SkyScan query 08:34:46 SkyScan query done: ret=0 az=135.48<-9032 ze=-12.315<-12821 Statuses=0009 0009 08:34:46 Msec=750 True Az=135.48 Ze=-12.315 Az status=0009 Ze status=0009 08:34:47 Check angles 08:34:47 SkyScan query 08:34:47 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.72<-14248 Statuses=0009 0009 08:34:47 Msec=1500 True Az=117.57 Ze=-33.72 Az status=0009 Ze status=0009 08:34:47 Check angles 08:34:47 SkyScan query 08:34:48 SkyScan query done: ret=0 az=99.735<-6649 ze=-51.57<-15438 Statuses=0009 0009 08:34:48 Msec=2250 True Az=99.735 Ze=-51.57 Az status=0009 Ze status=0009 08:34:48 Check angles 08:34:48 SkyScan query 08:34:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 08:34:49 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 08:34:49 Check angles 08:34:49 SkyScan query 08:34:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:34:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:34:49 Message to Master queued w/err=0: serial=136859 error=0 08:34:54 Received message from Master: op=Filter serial=136860 08:34:54 Color wheel filter change from 0 to 0 08:34:54 FLIGetFilterPos err=0 currentPosition=0 08:34:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:54 Filter is already there-color wheel unchanged 08:34:55 Received message from Master: op=Shutter serial=136861 08:34:55 Shutter LASER close 08:34:55 Received message from Camera: op=State serial=136863 08:34:55 GetSingleValue result=40 Value=cccccccc 08:34:55 SkyScan query 08:34:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:34:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:55 Parameters OK 08:34:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:55 Set A/D data flow result=40 08:34:55 Set A/D channel type result=40 08:34:55 Set A/D encoding result=40 08:34:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:55 Set channel filter=0.000000e+000 result=40 08:34:55 Config A/D Result=40 08:34:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:55 Get A/D filter: -9.255963e+061 result=40 08:34:55 Get A/D value=-858993460 result=40 08:34:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:55 Parameters OK 08:34:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:55 Set A/D data flow result=40 08:34:55 Set A/D channel type result=40 08:34:55 Set A/D encoding result=40 08:34:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:55 Set channel filter=0.000000e+000 result=40 08:34:55 Config A/D Result=40 08:34:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:55 Get A/D filter: -9.255963e+061 result=40 08:34:55 Get A/D value=-858993460 result=40 08:34:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:55 Aux= 08:34:55 Message to Camera, serial 136863 queued 08:35:32 Received message from Master: op=PointingHead serial=136876 08:35:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:35:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:35:32 Point started: ret=0 08:35:32 point_skyscan result=0 08:35:33 Check angles 08:35:33 SkyScan query 08:35:34 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.51<-17434 Statuses=0009 0009 08:35:34 Msec=0 True Az=109.14 Ze=-81.51 Az status=0009 Ze status=0009 08:35:34 Check angles 08:35:34 SkyScan query 08:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 08:35:34 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 08:35:35 Check angles 08:35:35 SkyScan query 08:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 08:35:35 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 08:35:35 Check angles 08:35:35 SkyScan query 08:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 08:35:36 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 08:35:36 Check angles 08:35:36 SkyScan query 08:35:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.735<-23049 Statuses=0008 0009 08:35:37 Msec=3000 True Az=112.995 Ze=-165.735 Az status=0008 Ze status=0009 08:35:37 Check angles 08:35:37 SkyScan query 08:35:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:35:38 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:35:38 Message to Master queued w/err=0: serial=136876 error=0 08:35:43 Received message from Master: op=Filter serial=136877 08:35:43 Color wheel filter change from 0 to 0 08:35:43 FLIGetFilterPos err=0 currentPosition=0 08:35:43 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:43 Filter is already there-color wheel unchanged 08:35:43 Received message from Master: op=Shutter serial=136878 08:35:43 Shutter LASER open 08:35:43 Received message from Camera: op=State serial=136880 08:35:43 GetSingleValue result=40 Value=cccccccc 08:35:43 SkyScan query 08:35:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:35:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:44 Parameters OK 08:35:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:44 Set A/D data flow result=40 08:35:44 Set A/D channel type result=40 08:35:44 Set A/D encoding result=40 08:35:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:44 Set channel filter=0.000000e+000 result=40 08:35:44 Config A/D Result=40 08:35:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:44 Get A/D filter: -9.255963e+061 result=40 08:35:44 Get A/D value=-858993460 result=40 08:35:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:44 Parameters OK 08:35:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:44 Set A/D data flow result=40 08:35:44 Set A/D channel type result=40 08:35:44 Set A/D encoding result=40 08:35:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:44 Set channel filter=0.000000e+000 result=40 08:35:44 Config A/D Result=40 08:35:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:44 Get A/D filter: -9.255963e+061 result=40 08:35:44 Get A/D value=-858993460 result=40 08:35:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:44 Aux= 08:35:44 Message to Camera, serial 136880 queued 08:35:52 Received message from Master: op=Shutter serial=136890 08:35:52 Shutter LASER close [UTC 2018-12-14 08:35:52] 08:35:52 Received message from Master: op=PointingHead serial=136894 08:35:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:35:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:35:53 Point started: ret=0 08:35:53 point_skyscan result=0 08:35:54 Check angles 08:35:54 SkyScan query 08:35:54 SkyScan query done: ret=0 az=89.625<-5975 ze=157.02<-1532 Statuses=0009 0009 08:35:54 Msec=0 True Az=89.625 Ze=157.02 Az status=0009 Ze status=0009 08:35:54 Check angles 08:35:54 SkyScan query 08:35:55 SkyScan query done: ret=0 az=72.06<-4804 ze=136.065<-2929 Statuses=0009 0009 08:35:55 Msec=750 True Az=72.06 Ze=136.065 Az status=0009 Ze status=0009 08:35:55 Check angles 08:35:55 SkyScan query 08:35:56 SkyScan query done: ret=0 az=54.75<-3650 ze=115.11<-4326 Statuses=0009 0009 08:35:56 Msec=1500 True Az=54.75 Ze=115.11 Az status=0009 Ze status=0009 08:35:56 Check angles 08:35:56 SkyScan query 08:35:56 SkyScan query done: ret=0 az=40.98<-2732 ze=94.14<-5724 Statuses=0009 0009 08:35:56 Msec=2250 True Az=40.98 Ze=94.14 Az status=0009 Ze status=0009 08:35:57 Check angles 08:35:57 SkyScan query 08:35:57 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 08:35:57 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 08:35:57 Check angles 08:35:57 SkyScan query 08:35:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 08:35:58 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 08:35:58 Check angles 08:35:58 SkyScan query 08:35:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:35:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:35:59 Message to Master queued w/err=0: serial=136894 error=0 08:36:04 Received message from Master: op=Filter serial=136895 08:36:04 Color wheel filter change from 0 to 0 08:36:04 FLIGetFilterPos err=0 currentPosition=0 08:36:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:04 Filter is already there-color wheel unchanged 08:36:04 Received message from Master: op=Shutter serial=136896 08:36:04 Shutter LASER close 08:36:04 Received message from Camera: op=State serial=136898 08:36:04 GetSingleValue result=40 Value=cccccccc 08:36:04 SkyScan query 08:36:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:36:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:05 Parameters OK 08:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:05 Set A/D data flow result=40 08:36:05 Set A/D channel type result=40 08:36:05 Set A/D encoding result=40 08:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:05 Set channel filter=0.000000e+000 result=40 08:36:05 Config A/D Result=40 08:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:05 Get A/D filter: -9.255963e+061 result=40 08:36:05 Get A/D value=-858993460 result=40 08:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:05 Parameters OK 08:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:05 Set A/D data flow result=40 08:36:05 Set A/D channel type result=40 08:36:05 Set A/D encoding result=40 08:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:05 Set channel filter=0.000000e+000 result=40 08:36:05 Config A/D Result=40 08:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:05 Get A/D filter: -9.255963e+061 result=40 08:36:05 Get A/D value=-858993460 result=40 08:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:05 Aux= 08:36:05 Message to Camera, serial 136898 queued 08:36:41 Received message from Master: op=PointingHead serial=136911 08:36:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:36:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:36:42 Point started: ret=0 08:36:42 point_skyscan result=0 08:36:42 Check angles 08:36:42 SkyScan query 08:36:43 SkyScan query done: ret=0 az=63.99<-4266 ze=66.57<-7562 Statuses=0009 0008 08:36:43 Msec=0 True Az=63.99 Ze=66.57 Az status=0009 Ze status=0008 08:36:43 Check angles 08:36:43 SkyScan query 08:36:44 SkyScan query done: ret=0 az=81.465<-5431 ze=66.51<-7566 Statuses=0009 0008 08:36:44 Msec=750 True Az=81.465 Ze=66.51 Az status=0009 Ze status=0008 08:36:44 Check angles 08:36:44 SkyScan query 08:36:45 SkyScan query done: ret=0 az=98.85<-6590 ze=66.51<-7566 Statuses=0009 0008 08:36:45 Msec=1500 True Az=98.85 Ze=66.51 Az status=0009 Ze status=0008 08:36:45 Check angles 08:36:45 SkyScan query 08:36:45 SkyScan query done: ret=0 az=116.355<-7757 ze=66.51<-7566 Statuses=0009 0008 08:36:45 Msec=2250 True Az=116.355 Ze=66.51 Az status=0009 Ze status=0008 08:36:45 Check angles 08:36:45 SkyScan query 08:36:46 SkyScan query done: ret=0 az=133.845<-8923 ze=66.51<-7566 Statuses=0009 0008 08:36:46 Msec=3000 True Az=133.845 Ze=66.51 Az status=0009 Ze status=0008 08:36:46 Check angles 08:36:46 SkyScan query 08:36:47 SkyScan query done: ret=0 az=151.26<-10084 ze=66.51<-7566 Statuses=0009 0008 08:36:47 Msec=3750 True Az=151.26 Ze=66.51 Az status=0009 Ze status=0008 08:36:47 Check angles 08:36:47 SkyScan query 08:36:48 SkyScan query done: ret=0 az=158.01<-10534 ze=66.51<-7566 Statuses=0008 0008 08:36:48 Msec=4500 True Az=158.01 Ze=66.51 Az status=0008 Ze status=0008 08:36:48 Message to Master queued w/err=0: serial=136911 error=0 08:36:53 Received message from Master: op=Filter serial=136912 08:36:53 Color wheel filter change from 0 to 0 08:36:53 FLIGetFilterPos err=0 currentPosition=0 08:36:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:53 Filter is already there-color wheel unchanged 08:36:53 Received message from Master: op=Shutter serial=136913 08:36:53 Shutter LASER close 08:36:53 Received message from Camera: op=State serial=136915 08:36:53 GetSingleValue result=40 Value=cccccccc 08:36:53 SkyScan query 08:36:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 08:36:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:53 Parameters OK 08:36:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:53 Set A/D data flow result=40 08:36:53 Set A/D channel type result=40 08:36:53 Set A/D encoding result=40 08:36:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:53 Set channel filter=0.000000e+000 result=40 08:36:53 Config A/D Result=40 08:36:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:53 Get A/D filter: -9.255963e+061 result=40 08:36:53 Get A/D value=-858993460 result=40 08:36:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:53 Parameters OK 08:36:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:53 Set A/D data flow result=40 08:36:53 Set A/D channel type result=40 08:36:53 Set A/D encoding result=40 08:36:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:53 Set channel filter=0.000000e+000 result=40 08:36:53 Config A/D Result=40 08:36:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:53 Get A/D filter: -9.255963e+061 result=40 08:36:53 Get A/D value=-858993460 result=40 08:36:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:53 Aux= 08:36:53 Message to Camera, serial 136915 queued 08:37:30 Received message from Master: op=PointingHead serial=136928 08:37:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:37:30 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:37:31 Point started: ret=0 08:37:31 point_skyscan result=0 08:37:31 Check angles 08:37:31 SkyScan query 08:37:32 SkyScan query done: ret=0 az=134.775<-8985 ze=36.465<-9569 Statuses=0009 0009 08:37:32 Msec=0 True Az=134.775 Ze=36.465 Az status=0009 Ze status=0009 08:37:32 Check angles 08:37:32 SkyScan query 08:37:33 SkyScan query done: ret=0 az=117.285<-7819 ze=15.54<-10964 Statuses=0009 0009 08:37:33 Msec=750 True Az=117.285 Ze=15.54 Az status=0009 Ze status=0009 08:37:33 Check angles 08:37:33 SkyScan query 08:37:33 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.445<-12363 Statuses=0009 0009 08:37:33 Msec=1500 True Az=99.9 Ze=-5.445 Az status=0009 Ze status=0009 08:37:34 Check angles 08:37:34 SkyScan query 08:37:34 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.895<-13793 Statuses=0009 0009 08:37:34 Msec=2250 True Az=82.05 Ze=-26.895 Az status=0009 Ze status=0009 08:37:34 Check angles 08:37:34 SkyScan query 08:37:35 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.58<-14572 Statuses=0009 0008 08:37:35 Msec=3000 True Az=64.545 Ze=-38.58 Az status=0009 Ze status=0008 08:37:35 Check angles 08:37:35 SkyScan query 08:37:36 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.52<-14568 Statuses=0009 0008 08:37:36 Msec=3750 True Az=47.13 Ze=-38.52 Az status=0009 Ze status=0008 08:37:36 Check angles 08:37:36 SkyScan query 08:37:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:37:36 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:37:36 Message to Master queued w/err=0: serial=136928 error=0 08:37:41 Received message from Master: op=Filter serial=136929 08:37:41 Color wheel filter change from 0 to 0 08:37:41 FLIGetFilterPos err=0 currentPosition=0 08:37:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:41 Filter is already there-color wheel unchanged 08:37:42 Received message from Master: op=Shutter serial=136930 08:37:42 Shutter LASER close 08:37:42 Received message from Camera: op=State serial=136932 08:37:42 GetSingleValue result=40 Value=cccccccc 08:37:42 SkyScan query 08:37:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:37:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:42 Parameters OK 08:37:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:42 Set A/D data flow result=40 08:37:42 Set A/D channel type result=40 08:37:42 Set A/D encoding result=40 08:37:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:42 Set channel filter=0.000000e+000 result=40 08:37:42 Config A/D Result=40 08:37:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:42 Get A/D filter: -9.255963e+061 result=40 08:37:42 Get A/D value=-858993460 result=40 08:37:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:42 Parameters OK 08:37:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:42 Set A/D data flow result=40 08:37:42 Set A/D channel type result=40 08:37:42 Set A/D encoding result=40 08:37:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:42 Set channel filter=0.000000e+000 result=40 08:37:42 Config A/D Result=40 08:37:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:42 Get A/D filter: -9.255963e+061 result=40 08:37:42 Get A/D value=-858993460 result=40 08:37:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:42 Aux= 08:37:42 Message to Camera, serial 136932 queued 08:38:19 Received message from Master: op=PointingHead serial=136945 08:38:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:38:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:38:19 Point started: ret=0 08:38:19 point_skyscan result=0 08:38:20 Check angles 08:38:20 SkyScan query 08:38:21 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.67<-16578 Statuses=0009 0009 08:38:21 Msec=0 True Az=64.2 Ze=-68.67 Az status=0009 Ze status=0009 08:38:21 Check angles 08:38:21 SkyScan query 08:38:21 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.625<-17975 Statuses=0009 0009 08:38:21 Msec=750 True Az=81.735 Ze=-89.625 Az status=0009 Ze status=0009 08:38:22 Check angles 08:38:22 SkyScan query 08:38:22 SkyScan query done: ret=0 az=99.6<-6640 ze=-111.015<-19401 Statuses=0009 0009 08:38:22 Msec=1500 True Az=99.6 Ze=-111.015 Az status=0009 Ze status=0009 08:38:22 Check angles 08:38:22 SkyScan query 08:38:23 SkyScan query done: ret=0 az=117.36<-7824 ze=-132.345<-20823 Statuses=0009 0009 08:38:23 Msec=2250 True Az=117.36 Ze=-132.345 Az status=0009 Ze status=0009 08:38:23 Check angles 08:38:23 SkyScan query 08:38:24 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 08:38:24 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 08:38:24 Check angles 08:38:24 SkyScan query 08:38:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:38:24 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:38:24 Message to Master queued w/err=0: serial=136945 error=0 08:38:29 Received message from Master: op=Filter serial=136946 08:38:29 Color wheel filter change from 0 to 0 08:38:29 FLIGetFilterPos err=0 currentPosition=0 08:38:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:29 Filter is already there-color wheel unchanged 08:38:30 Received message from Master: op=Shutter serial=136947 08:38:30 Shutter LASER close 08:38:30 Received message from Camera: op=State serial=136949 08:38:30 GetSingleValue result=40 Value=cccccccc 08:38:30 SkyScan query 08:38:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:38:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:30 Parameters OK 08:38:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:30 Set A/D data flow result=40 08:38:30 Set A/D channel type result=40 08:38:30 Set A/D encoding result=40 08:38:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:30 Set channel filter=0.000000e+000 result=40 08:38:30 Config A/D Result=40 08:38:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:30 Get A/D filter: -9.255963e+061 result=40 08:38:30 Get A/D value=-858993460 result=40 08:38:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:30 Parameters OK 08:38:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:30 Set A/D data flow result=40 08:38:30 Set A/D channel type result=40 08:38:30 Set A/D encoding result=40 08:38:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:30 Set channel filter=0.000000e+000 result=40 08:38:30 Config A/D Result=40 08:38:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:30 Get A/D filter: -9.255963e+061 result=40 08:38:30 Get A/D value=-858993460 result=40 08:38:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:30 Aux= 08:38:30 Message to Camera, serial 136949 queued 08:39:07 Received message from Master: op=PointingHead serial=136962 08:39:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:39:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:39:07 Point started: ret=0 08:39:07 point_skyscan result=0 08:39:08 Check angles 08:39:08 SkyScan query 08:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.375<-23425 Statuses=0009 0009 08:39:09 Msec=0 True Az=112.995 Ze=-171.375 Az status=0009 Ze status=0009 08:39:09 Check angles 08:39:09 SkyScan query 08:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:39:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:39:10 Message to Master queued w/err=0: serial=136962 error=0 08:39:15 Received message from Master: op=Filter serial=136963 08:39:15 Color wheel filter change from 0 to 0 08:39:15 FLIGetFilterPos err=0 currentPosition=0 08:39:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:15 Filter is already there-color wheel unchanged 08:39:15 Received message from Master: op=Shutter serial=136964 08:39:15 Shutter LASER open 08:39:15 Received message from Camera: op=State serial=136966 08:39:15 GetSingleValue result=40 Value=cccccccc 08:39:15 SkyScan query 08:39:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:39:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:15 Parameters OK 08:39:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:15 Set A/D data flow result=40 08:39:15 Set A/D channel type result=40 08:39:15 Set A/D encoding result=40 08:39:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:15 Set channel filter=0.000000e+000 result=40 08:39:15 Config A/D Result=40 08:39:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:15 Get A/D filter: -9.255963e+061 result=40 08:39:15 Get A/D value=-858993460 result=40 08:39:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:15 Parameters OK 08:39:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:15 Set A/D data flow result=40 08:39:15 Set A/D channel type result=40 08:39:15 Set A/D encoding result=40 08:39:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:15 Set channel filter=0.000000e+000 result=40 08:39:15 Config A/D Result=40 08:39:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:15 Get A/D filter: -9.255963e+061 result=40 08:39:15 Get A/D value=-858993460 result=40 08:39:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:15 Aux= 08:39:15 Message to Camera, serial 136966 queued 08:39:23 Received message from Master: op=Shutter serial=136975 08:39:23 Shutter LASER close 08:39:24 Received message from Master: op=PointingHead serial=136979 08:39:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:39:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:39:24 Point started: ret=0 08:39:24 point_skyscan result=0 08:39:25 Check angles 08:39:25 SkyScan query 08:39:25 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.295<-21553 Statuses=0009 0009 08:39:25 Msec=0 True Az=136.005 Ze=-143.295 Az status=0009 Ze status=0009 08:39:25 Check angles 08:39:25 SkyScan query 08:39:26 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.295<-20153 Statuses=0009 0009 08:39:26 Msec=750 True Az=153.525 Ze=-122.295 Az status=0009 Ze status=0009 08:39:26 Check angles 08:39:26 SkyScan query 08:39:27 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.89<-18726 Statuses=0009 0009 08:39:27 Msec=1500 True Az=171.435 Ze=-100.89 Az status=0009 Ze status=0009 08:39:27 Check angles 08:39:27 SkyScan query 08:39:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.98<-17332 Statuses=0008 0009 08:39:28 Msec=2250 True Az=176.01 Ze=-79.98 Az status=0008 Ze status=0009 08:39:28 Check angles 08:39:28 SkyScan query 08:39:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.01<-15934 Statuses=0008 0009 08:39:28 Msec=3000 True Az=176.01 Ze=-59.01 Az status=0008 Ze status=0009 08:39:28 Check angles 08:39:28 SkyScan query 08:39:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:39:29 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:39:29 Message to Master queued w/err=0: serial=136979 error=0 08:39:34 Received message from Master: op=Filter serial=136980 08:39:34 Color wheel filter change from 0 to 0 08:39:34 FLIGetFilterPos err=0 currentPosition=0 08:39:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:34 Filter is already there-color wheel unchanged 08:39:34 Received message from Master: op=Shutter serial=136981 08:39:34 Shutter LASER close 08:39:34 Received message from Camera: op=State serial=136983 08:39:34 GetSingleValue result=40 Value=cccccccc 08:39:34 SkyScan query 08:39:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:39:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:35 Parameters OK 08:39:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:35 Set A/D data flow result=40 08:39:35 Set A/D channel type result=40 08:39:35 Set A/D encoding result=40 08:39:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:35 Set channel filter=0.000000e+000 result=40 08:39:35 Config A/D Result=40 08:39:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:35 Get A/D filter: -9.255963e+061 result=40 08:39:35 Get A/D value=-858993460 result=40 08:39:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:35 Parameters OK 08:39:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:35 Set A/D data flow result=40 08:39:35 Set A/D channel type result=40 08:39:35 Set A/D encoding result=40 08:39:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:35 Set channel filter=0.000000e+000 result=40 08:39:35 Config A/D Result=40 08:39:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:35 Get A/D filter: -9.255963e+061 result=40 08:39:35 Get A/D value=-858993460 result=40 08:39:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:35 Aux= 08:39:35 Message to Camera, serial 136983 queued 08:40:13 Received message from Master: op=PointingHead serial=136996 08:40:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:40:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:40:13 Point started: ret=0 08:40:13 point_skyscan result=0 08:40:14 Check angles 08:40:14 SkyScan query 08:40:15 SkyScan query done: ret=0 az=151.92<-10128 ze=-20.82<-13388 Statuses=0009 0009 08:40:15 Msec=0 True Az=151.92 Ze=-20.82 Az status=0009 Ze status=0009 08:40:15 Check angles 08:40:15 SkyScan query 08:40:16 SkyScan query done: ret=0 az=133.98<-8932 ze=0.39<-11974 Statuses=0009 0009 08:40:16 Msec=750 True Az=133.98 Ze=0.39 Az status=0009 Ze status=0009 08:40:16 Check angles 08:40:16 SkyScan query 08:40:16 SkyScan query done: ret=0 az=116.625<-7775 ze=21.135<-10591 Statuses=0009 0009 08:40:16 Msec=1500 True Az=116.625 Ze=21.135 Az status=0009 Ze status=0009 08:40:17 Check angles 08:40:17 SkyScan query 08:40:17 SkyScan query done: ret=0 az=98.955<-6597 ze=42.39<-9174 Statuses=0009 0009 08:40:17 Msec=2250 True Az=98.955 Ze=42.39 Az status=0009 Ze status=0009 08:40:17 Check angles 08:40:17 SkyScan query 08:40:18 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 08:40:18 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 08:40:18 Check angles 08:40:18 SkyScan query 08:40:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:40:19 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:40:19 Message to Master queued w/err=0: serial=136996 error=0 08:40:24 Received message from Master: op=Filter serial=136997 08:40:24 Color wheel filter change from 0 to 0 08:40:24 FLIGetFilterPos err=0 currentPosition=0 08:40:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:24 Filter is already there-color wheel unchanged 08:40:24 Received message from Master: op=Shutter serial=136998 08:40:24 Shutter LASER close 08:40:24 Received message from Camera: op=State serial=137000 08:40:24 GetSingleValue result=40 Value=cccccccc 08:40:24 SkyScan query 08:40:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:40:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:24 Parameters OK 08:40:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:24 Set A/D data flow result=40 08:40:24 Set A/D channel type result=40 08:40:24 Set A/D encoding result=40 08:40:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:24 Set channel filter=0.000000e+000 result=40 08:40:24 Config A/D Result=40 08:40:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:24 Get A/D filter: -9.255963e+061 result=40 08:40:24 Get A/D value=-858993460 result=40 08:40:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:24 Parameters OK 08:40:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:24 Set A/D data flow result=40 08:40:24 Set A/D channel type result=40 08:40:24 Set A/D encoding result=40 08:40:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:24 Set channel filter=0.000000e+000 result=40 08:40:24 Config A/D Result=40 08:40:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:24 Get A/D filter: -9.255963e+061 result=40 08:40:24 Get A/D value=-858993460 result=40 08:40:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:24 Aux= 08:40:24 Message to Camera, serial 137000 queued 08:41:01 Received message from Master: op=PointingHead serial=137013 08:41:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:41:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:41:02 Point started: ret=0 08:41:02 point_skyscan result=0 08:41:02 Check angles 08:41:02 SkyScan query 08:41:03 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 08:41:03 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 08:41:03 Check angles 08:41:03 SkyScan query 08:41:04 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 08:41:04 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 08:41:04 Check angles 08:41:04 SkyScan query 08:41:04 SkyScan query done: ret=0 az=144.63<-9642 ze=38.505<-9433 Statuses=0009 0008 08:41:04 Msec=1500 True Az=144.63 Ze=38.505 Az status=0009 Ze status=0008 08:41:05 Check angles 08:41:05 SkyScan query 08:41:05 SkyScan query done: ret=0 az=162.12<-10808 ze=38.505<-9433 Statuses=0009 0008 08:41:05 Msec=2250 True Az=162.12 Ze=38.505 Az status=0009 Ze status=0008 08:41:05 Check angles 08:41:05 SkyScan query 08:41:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 08:41:06 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 08:41:06 Check angles 08:41:06 SkyScan query 08:41:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:41:07 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:41:07 Message to Master queued w/err=0: serial=137013 error=0 08:41:12 Received message from Master: op=Filter serial=137014 08:41:12 Color wheel filter change from 0 to 0 08:41:12 FLIGetFilterPos err=0 currentPosition=0 08:41:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:41:12 Filter is already there-color wheel unchanged 08:41:12 Received message from Master: op=Shutter serial=137015 08:41:12 Shutter LASER close 08:41:12 Received message from Camera: op=State serial=137017 08:41:12 GetSingleValue result=40 Value=cccccccc 08:41:12 SkyScan query 08:41:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:41:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:12 Parameters OK 08:41:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:12 Set A/D data flow result=40 08:41:12 Set A/D channel type result=40 08:41:12 Set A/D encoding result=40 08:41:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:12 Set channel filter=0.000000e+000 result=40 08:41:12 Config A/D Result=40 08:41:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:12 Get A/D filter: -9.255963e+061 result=40 08:41:12 Get A/D value=-858993460 result=40 08:41:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:12 Parameters OK 08:41:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:12 Set A/D data flow result=40 08:41:12 Set A/D channel type result=40 08:41:12 Set A/D encoding result=40 08:41:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:12 Set channel filter=0.000000e+000 result=40 08:41:12 Config A/D Result=40 08:41:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:12 Get A/D filter: -9.255963e+061 result=40 08:41:12 Get A/D value=-858993460 result=40 08:41:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:12 Aux= 08:41:12 Message to Camera, serial 137017 queued 08:41:49 Received message from Master: op=PointingHead serial=137030 08:41:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:41:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:41:50 Point started: ret=0 08:41:50 point_skyscan result=0 08:41:50 Check angles 08:41:50 SkyScan query 08:41:51 SkyScan query done: ret=0 az=152.835<-10189 ze=8.595<-11427 Statuses=0009 0009 08:41:51 Msec=0 True Az=152.835 Ze=8.595 Az status=0009 Ze status=0009 08:41:51 Check angles 08:41:51 SkyScan query 08:41:52 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.36<-12824 Statuses=0009 0009 08:41:52 Msec=750 True Az=135.33 Ze=-12.36 Az status=0009 Ze status=0009 08:41:52 Check angles 08:41:52 SkyScan query 08:41:52 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.285<-14219 Statuses=0009 0009 08:41:52 Msec=1500 True Az=117.795 Ze=-33.285 Az status=0009 Ze status=0009 08:41:53 Check angles 08:41:53 SkyScan query 08:41:53 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.555<-15437 Statuses=0009 0009 08:41:53 Msec=2250 True Az=100.425 Ze=-51.555 Az status=0009 Ze status=0009 08:41:53 Check angles 08:41:53 SkyScan query 08:41:54 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 08:41:54 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 08:41:54 Check angles 08:41:54 SkyScan query 08:41:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:41:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:41:55 Message to Master queued w/err=0: serial=137030 error=0 08:42:00 Received message from Master: op=Filter serial=137031 08:42:00 Color wheel filter change from 0 to 0 08:42:00 FLIGetFilterPos err=0 currentPosition=0 08:42:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:00 Filter is already there-color wheel unchanged 08:42:00 Received message from Master: op=Shutter serial=137032 08:42:00 Shutter LASER close 08:42:00 Received message from Camera: op=State serial=137034 08:42:00 GetSingleValue result=40 Value=cccccccc 08:42:00 SkyScan query 08:42:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:42:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:01 Parameters OK 08:42:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:01 Set A/D data flow result=40 08:42:01 Set A/D channel type result=40 08:42:01 Set A/D encoding result=40 08:42:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:01 Set channel filter=0.000000e+000 result=40 08:42:01 Config A/D Result=40 08:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:01 Get A/D filter: -9.255963e+061 result=40 08:42:01 Get A/D value=-858993460 result=40 08:42:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:01 Parameters OK 08:42:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:01 Set A/D data flow result=40 08:42:01 Set A/D channel type result=40 08:42:01 Set A/D encoding result=40 08:42:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:01 Set channel filter=0.000000e+000 result=40 08:42:01 Config A/D Result=40 08:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:01 Get A/D filter: -9.255963e+061 result=40 08:42:01 Get A/D value=-858993460 result=40 08:42:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:01 Aux= 08:42:01 Message to Camera, serial 137034 queued 08:42:37 Received message from Master: op=PointingHead serial=137047 08:42:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:42:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:42:38 Point started: ret=0 08:42:38 point_skyscan result=0 08:42:38 Check angles 08:42:38 SkyScan query 08:42:39 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.375<-17425 Statuses=0009 0009 08:42:39 Msec=0 True Az=109.14 Ze=-81.375 Az status=0009 Ze status=0009 08:42:39 Check angles 08:42:39 SkyScan query 08:42:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.765<-18851 Statuses=0008 0009 08:42:40 Msec=750 True Az=112.995 Ze=-102.765 Az status=0008 Ze status=0009 08:42:40 Check angles 08:42:40 SkyScan query 08:42:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.72<-20248 Statuses=0008 0009 08:42:41 Msec=1500 True Az=112.995 Ze=-123.72 Az status=0008 Ze status=0009 08:42:41 Check angles 08:42:41 SkyScan query 08:42:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 08:42:41 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 08:42:41 Check angles 08:42:41 SkyScan query 08:42:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.02<-23068 Statuses=0008 0009 08:42:42 Msec=3000 True Az=112.995 Ze=-166.02 Az status=0008 Ze status=0009 08:42:42 Check angles 08:42:42 SkyScan query 08:42:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:42:43 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:42:43 Message to Master queued w/err=0: serial=137047 error=0 08:42:48 Received message from Master: op=Filter serial=137048 08:42:48 Color wheel filter change from 0 to 0 08:42:48 FLIGetFilterPos err=0 currentPosition=0 08:42:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:48 Filter is already there-color wheel unchanged 08:42:48 Received message from Master: op=Shutter serial=137049 08:42:48 Shutter LASER open 08:42:48 Received message from Camera: op=State serial=137051 08:42:48 GetSingleValue result=40 Value=cccccccc 08:42:48 SkyScan query 08:42:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:42:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:49 Parameters OK 08:42:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:49 Set A/D data flow result=40 08:42:49 Set A/D channel type result=40 08:42:49 Set A/D encoding result=40 08:42:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:49 Set channel filter=0.000000e+000 result=40 08:42:49 Config A/D Result=40 08:42:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:49 Get A/D filter: -9.255963e+061 result=40 08:42:49 Get A/D value=-858993460 result=40 08:42:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:49 Parameters OK 08:42:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:49 Set A/D data flow result=40 08:42:49 Set A/D channel type result=40 08:42:49 Set A/D encoding result=40 08:42:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:49 Set channel filter=0.000000e+000 result=40 08:42:49 Config A/D Result=40 08:42:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:49 Get A/D filter: -9.255963e+061 result=40 08:42:49 Get A/D value=-858993460 result=40 08:42:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:49 Aux= 08:42:49 Message to Camera, serial 137051 queued 08:42:57 Received message from Master: op=Shutter serial=137061 08:42:57 Shutter LASER close 08:42:58 Received message from Master: op=PointingHead serial=137065 08:42:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:42:58 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:42:58 Point started: ret=0 08:42:58 point_skyscan result=0 08:42:59 Check angles 08:42:59 SkyScan query 08:42:59 SkyScan query done: ret=0 az=89.64<-5976 ze=156.99<-1534 Statuses=0009 0009 08:42:59 Msec=0 True Az=89.64 Ze=156.99 Az status=0009 Ze status=0009 08:42:59 Check angles 08:42:59 SkyScan query 08:43:00 SkyScan query done: ret=0 az=72.225<-4815 ze=136.035<-2931 Statuses=0009 0009 08:43:00 Msec=750 True Az=72.225 Ze=136.035 Az status=0009 Ze status=0009 08:43:00 Check angles 08:43:00 SkyScan query 08:43:01 SkyScan query done: ret=0 az=54.78<-3652 ze=115.095<-4327 Statuses=0009 0009 08:43:01 Msec=1500 True Az=54.78 Ze=115.095 Az status=0009 Ze status=0009 08:43:01 Check angles 08:43:01 SkyScan query 08:43:02 SkyScan query done: ret=0 az=40.98<-2732 ze=94.125<-5725 Statuses=0009 0009 08:43:02 Msec=2250 True Az=40.98 Ze=94.125 Az status=0009 Ze status=0009 08:43:02 Check angles 08:43:02 SkyScan query 08:43:02 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 08:43:02 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 08:43:02 Check angles 08:43:02 SkyScan query 08:43:03 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 08:43:03 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 08:43:03 Check angles 08:43:03 SkyScan query 08:43:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:43:04 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:43:04 Message to Master queued w/err=0: serial=137065 error=0 08:43:09 Received message from Master: op=Filter serial=137066 08:43:09 Color wheel filter change from 0 to 0 08:43:09 FLIGetFilterPos err=0 currentPosition=0 08:43:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:09 Filter is already there-color wheel unchanged 08:43:09 Received message from Master: op=Shutter serial=137067 08:43:09 Shutter LASER close 08:43:09 Received message from Camera: op=State serial=137069 08:43:09 GetSingleValue result=40 Value=cccccccc 08:43:09 SkyScan query 08:43:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:43:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:10 Parameters OK 08:43:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:10 Set A/D data flow result=40 08:43:10 Set A/D channel type result=40 08:43:10 Set A/D encoding result=40 08:43:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:10 Set channel filter=0.000000e+000 result=40 08:43:10 Config A/D Result=40 08:43:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:10 Get A/D filter: -9.255963e+061 result=40 08:43:10 Get A/D value=-858993460 result=40 08:43:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:10 Parameters OK 08:43:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:10 Set A/D data flow result=40 08:43:10 Set A/D channel type result=40 08:43:10 Set A/D encoding result=40 08:43:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:10 Set channel filter=0.000000e+000 result=40 08:43:10 Config A/D Result=40 08:43:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:10 Get A/D filter: -9.255963e+061 result=40 08:43:10 Get A/D value=-858993460 result=40 08:43:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:10 Aux= 08:43:10 Message to Camera, serial 137069 queued 08:43:47 Received message from Master: op=PointingHead serial=137082 08:43:47 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:43:47 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:43:47 Point started: ret=0 08:43:47 point_skyscan result=0 08:43:48 Check angles 08:43:48 SkyScan query 08:43:48 SkyScan query done: ret=0 az=63.825<-4255 ze=66.54<-7564 Statuses=0009 0008 08:43:48 Msec=0 True Az=63.825 Ze=66.54 Az status=0009 Ze status=0008 08:43:48 Check angles 08:43:48 SkyScan query 08:43:49 SkyScan query done: ret=0 az=81.375<-5425 ze=66.51<-7566 Statuses=0009 0008 08:43:49 Msec=750 True Az=81.375 Ze=66.51 Az status=0009 Ze status=0008 08:43:49 Check angles 08:43:49 SkyScan query 08:43:50 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 08:43:50 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 08:43:50 Check angles 08:43:50 SkyScan query 08:43:51 SkyScan query done: ret=0 az=116.67<-7778 ze=66.495<-7567 Statuses=0009 0008 08:43:51 Msec=2250 True Az=116.67 Ze=66.495 Az status=0009 Ze status=0008 08:43:51 Check angles 08:43:51 SkyScan query 08:43:51 SkyScan query done: ret=0 az=134.16<-8944 ze=66.495<-7567 Statuses=0009 0008 08:43:51 Msec=3000 True Az=134.16 Ze=66.495 Az status=0009 Ze status=0008 08:43:51 Check angles 08:43:51 SkyScan query 08:43:52 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 08:43:52 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 08:43:52 Check angles 08:43:52 SkyScan query 08:43:53 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:43:53 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:43:53 Message to Master queued w/err=0: serial=137082 error=0 08:43:58 Received message from Master: op=Filter serial=137083 08:43:58 Color wheel filter change from 0 to 0 08:43:58 FLIGetFilterPos err=0 currentPosition=0 08:43:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:58 Filter is already there-color wheel unchanged 08:43:58 Received message from Master: op=Shutter serial=137084 08:43:58 Shutter LASER close 08:43:58 Received message from Camera: op=State serial=137086 08:43:58 GetSingleValue result=40 Value=cccccccc 08:43:58 SkyScan query 08:43:59 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:43:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:59 Parameters OK 08:43:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:59 Set A/D data flow result=40 08:43:59 Set A/D channel type result=40 08:43:59 Set A/D encoding result=40 08:43:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:59 Set channel filter=0.000000e+000 result=40 08:43:59 Config A/D Result=40 08:43:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:59 Get A/D filter: -9.255963e+061 result=40 08:43:59 Get A/D value=-858993460 result=40 08:43:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:59 Parameters OK 08:43:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:59 Set A/D data flow result=40 08:43:59 Set A/D channel type result=40 08:43:59 Set A/D encoding result=40 08:43:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:59 Set channel filter=0.000000e+000 result=40 08:43:59 Config A/D Result=40 08:43:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:59 Get A/D filter: -9.255963e+061 result=40 08:43:59 Get A/D value=-858993460 result=40 08:43:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:59 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:59 Aux= 08:43:59 Message to Camera, serial 137086 queued 08:44:35 Received message from Master: op=PointingHead serial=137099 08:44:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:44:35 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:44:36 Point started: ret=0 08:44:36 point_skyscan result=0 08:44:37 Check angles 08:44:37 SkyScan query 08:44:37 SkyScan query done: ret=0 az=134.565<-8971 ze=36.24<-9584 Statuses=0009 0009 08:44:37 Msec=0 True Az=134.565 Ze=36.24 Az status=0009 Ze status=0009 08:44:37 Check angles 08:44:37 SkyScan query 08:44:38 SkyScan query done: ret=0 az=116.745<-7783 ze=14.805<-11013 Statuses=0009 0009 08:44:38 Msec=750 True Az=116.745 Ze=14.805 Az status=0009 Ze status=0009 08:44:38 Check angles 08:44:38 SkyScan query 08:44:39 SkyScan query done: ret=0 az=99.315<-6621 ze=-6.15<-12410 Statuses=0009 0009 08:44:39 Msec=1500 True Az=99.315 Ze=-6.15 Az status=0009 Ze status=0009 08:44:39 Check angles 08:44:39 SkyScan query 08:44:39 SkyScan query done: ret=0 az=81.885<-5459 ze=-27.105<-13807 Statuses=0009 0009 08:44:39 Msec=2250 True Az=81.885 Ze=-27.105 Az status=0009 Ze status=0009 08:44:40 Check angles 08:44:40 SkyScan query 08:44:40 SkyScan query done: ret=0 az=64.335<-4289 ze=-38.58<-14572 Statuses=0009 0008 08:44:40 Msec=3000 True Az=64.335 Ze=-38.58 Az status=0009 Ze status=0008 08:44:40 Check angles 08:44:40 SkyScan query 08:44:41 SkyScan query done: ret=0 az=46.89<-3126 ze=-38.52<-14568 Statuses=0009 0008 08:44:41 Msec=3750 True Az=46.89 Ze=-38.52 Az status=0009 Ze status=0008 08:44:41 Check angles 08:44:41 SkyScan query 08:44:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:44:42 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:44:42 Message to Master queued w/err=0: serial=137099 error=0 08:44:47 Received message from Master: op=Filter serial=137100 08:44:47 Color wheel filter change from 0 to 0 08:44:47 FLIGetFilterPos err=0 currentPosition=0 08:44:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:47 Filter is already there-color wheel unchanged 08:44:47 Received message from Master: op=Shutter serial=137101 08:44:47 Shutter LASER close 08:44:47 Received message from Camera: op=State serial=137103 08:44:47 GetSingleValue result=40 Value=cccccccc 08:44:47 SkyScan query 08:44:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:44:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:47 Parameters OK 08:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:47 Set A/D data flow result=40 08:44:47 Set A/D channel type result=40 08:44:47 Set A/D encoding result=40 08:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:47 Set channel filter=0.000000e+000 result=40 08:44:47 Config A/D Result=40 08:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:47 Get A/D filter: -9.255963e+061 result=40 08:44:47 Get A/D value=-858993460 result=40 08:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:47 Parameters OK 08:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:47 Set A/D data flow result=40 08:44:47 Set A/D channel type result=40 08:44:47 Set A/D encoding result=40 08:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:47 Set channel filter=0.000000e+000 result=40 08:44:47 Config A/D Result=40 08:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:47 Get A/D filter: -9.255963e+061 result=40 08:44:47 Get A/D value=-858993460 result=40 08:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:47 Aux= 08:44:47 Message to Camera, serial 137103 queued 08:45:23 Received message from Master: op=PointingHead serial=137115 08:45:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:45:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:45:24 Point started: ret=0 08:45:24 point_skyscan result=0 08:45:24 Check angles 08:45:24 SkyScan query 08:45:25 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.415<-16561 Statuses=0009 0009 08:45:25 Msec=0 True Az=64.17 Ze=-68.415 Az status=0009 Ze status=0009 08:45:25 Check angles 08:45:25 SkyScan query 08:45:26 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.37<-17958 Statuses=0009 0009 08:45:26 Msec=750 True Az=81.615 Ze=-89.37 Az status=0009 Ze status=0009 08:45:26 Check angles 08:45:26 SkyScan query 08:45:26 SkyScan query done: ret=0 az=99<-6600 ze=-110.325<-19355 Statuses=0009 0009 08:45:26 Msec=1500 True Az=99 Ze=-110.325 Az status=0009 Ze status=0009 08:45:27 Check angles 08:45:27 SkyScan query 08:45:27 SkyScan query done: ret=0 az=116.475<-7765 ze=-131.265<-20751 Statuses=0009 0009 08:45:27 Msec=2250 True Az=116.475 Ze=-131.265 Az status=0009 Ze status=0009 08:45:27 Received message from Master: op=Identify serial=137116 08:45:27 Check angles 08:45:27 SkyScan query 08:45:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 08:45:28 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 08:45:28 Check angles 08:45:28 SkyScan query 08:45:29 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:45:29 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:45:29 Message to Master queued w/err=0: serial=137115 error=0 08:45:34 Received message from Master: op=Filter serial=137119 08:45:34 Color wheel filter change from 0 to 0 08:45:34 FLIGetFilterPos err=0 currentPosition=0 08:45:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:34 Filter is already there-color wheel unchanged 08:45:34 Received message from Master: op=Shutter serial=137120 08:45:34 Shutter LASER close 08:45:34 Received message from Camera: op=State serial=137122 08:45:34 GetSingleValue result=40 Value=cccccccc 08:45:34 SkyScan query 08:45:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:45:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:35 Parameters OK 08:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:35 Set A/D data flow result=40 08:45:35 Set A/D channel type result=40 08:45:35 Set A/D encoding result=40 08:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:35 Set channel filter=0.000000e+000 result=40 08:45:35 Config A/D Result=40 08:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:35 Get A/D filter: -9.255963e+061 result=40 08:45:35 Get A/D value=-858993460 result=40 08:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:35 Parameters OK 08:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:35 Set A/D data flow result=40 08:45:35 Set A/D channel type result=40 08:45:35 Set A/D encoding result=40 08:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:35 Set channel filter=0.000000e+000 result=40 08:45:35 Config A/D Result=40 [UTC 2018-12-14 08:45:35] 08:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:35 Get A/D filter: -9.255963e+061 result=40 08:45:35 Get A/D value=-858993460 result=40 08:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:35 Aux= 08:45:35 Message to Camera, serial 137122 queued 08:46:11 Received message from Master: op=PointingHead serial=137135 08:46:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:46:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:46:12 Point started: ret=0 08:46:12 point_skyscan result=0 08:46:12 Check angles 08:46:12 SkyScan query 08:46:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0009 0009 08:46:13 Msec=0 True Az=112.995 Ze=-171.21 Az status=0009 Ze status=0009 08:46:13 Check angles 08:46:13 SkyScan query 08:46:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:46:14 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:46:14 Message to Master queued w/err=0: serial=137135 error=0 08:46:19 Received message from Master: op=Filter serial=137136 08:46:19 Color wheel filter change from 0 to 0 08:46:19 FLIGetFilterPos err=0 currentPosition=0 08:46:19 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:19 Filter is already there-color wheel unchanged 08:46:19 Received message from Master: op=Shutter serial=137137 08:46:19 Shutter LASER open 08:46:19 Received message from Camera: op=State serial=137139 08:46:19 GetSingleValue result=40 Value=cccccccc 08:46:19 SkyScan query 08:46:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:46:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:20 Parameters OK 08:46:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:20 Set A/D data flow result=40 08:46:20 Set A/D channel type result=40 08:46:20 Set A/D encoding result=40 08:46:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:20 Set channel filter=0.000000e+000 result=40 08:46:20 Config A/D Result=40 08:46:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:20 Get A/D filter: -9.255963e+061 result=40 08:46:20 Get A/D value=-858993460 result=40 08:46:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:20 Parameters OK 08:46:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:20 Set A/D data flow result=40 08:46:20 Set A/D channel type result=40 08:46:20 Set A/D encoding result=40 08:46:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:20 Set channel filter=0.000000e+000 result=40 08:46:20 Config A/D Result=40 08:46:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:20 Get A/D filter: -9.255963e+061 result=40 08:46:20 Get A/D value=-858993460 result=40 08:46:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:20 Aux= 08:46:20 Message to Camera, serial 137139 queued 08:46:28 Received message from Master: op=Shutter serial=137149 08:46:28 Shutter LASER close 08:46:29 Received message from Master: op=PointingHead serial=137153 08:46:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:46:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:46:29 Point started: ret=0 08:46:29 point_skyscan result=0 08:46:30 Check angles 08:46:30 SkyScan query 08:46:30 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.085<-21539 Statuses=0009 0009 08:46:30 Msec=0 True Az=136.14 Ze=-143.085 Az status=0009 Ze status=0009 08:46:31 Check angles 08:46:31 SkyScan query 08:46:31 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.145<-20143 Statuses=0009 0009 08:46:31 Msec=750 True Az=153.585 Ze=-122.145 Az status=0009 Ze status=0009 08:46:31 Check angles 08:46:31 SkyScan query 08:46:32 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.19<-18746 Statuses=0009 0009 08:46:32 Msec=1500 True Az=171.06 Ze=-101.19 Az status=0009 Ze status=0009 08:46:32 Check angles 08:46:32 SkyScan query 08:46:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.265<-17351 Statuses=0008 0009 08:46:33 Msec=2250 True Az=176.01 Ze=-80.265 Az status=0008 Ze status=0009 08:46:33 Check angles 08:46:33 SkyScan query 08:46:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.28<-15952 Statuses=0008 0009 08:46:33 Msec=3000 True Az=176.01 Ze=-59.28 Az status=0008 Ze status=0009 08:46:34 Check angles 08:46:34 SkyScan query 08:46:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:46:34 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:46:34 Message to Master queued w/err=0: serial=137153 error=0 08:46:39 Received message from Master: op=Filter serial=137154 08:46:39 Color wheel filter change from 0 to 0 08:46:39 FLIGetFilterPos err=0 currentPosition=0 08:46:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:39 Filter is already there-color wheel unchanged 08:46:39 Received message from Master: op=Shutter serial=137155 08:46:39 Shutter LASER close 08:46:40 Received message from Camera: op=State serial=137157 08:46:40 GetSingleValue result=40 Value=cccccccc 08:46:40 SkyScan query 08:46:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:46:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:40 Parameters OK 08:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:40 Set A/D data flow result=40 08:46:40 Set A/D channel type result=40 08:46:40 Set A/D encoding result=40 08:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:40 Set channel filter=0.000000e+000 result=40 08:46:40 Config A/D Result=40 08:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:40 Get A/D filter: -9.255963e+061 result=40 08:46:40 Get A/D value=-858993460 result=40 08:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:40 Parameters OK 08:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:40 Set A/D data flow result=40 08:46:40 Set A/D channel type result=40 08:46:40 Set A/D encoding result=40 08:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:40 Set channel filter=0.000000e+000 result=40 08:46:40 Config A/D Result=40 08:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:40 Get A/D filter: -9.255963e+061 result=40 08:46:40 Get A/D value=-858993460 result=40 08:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:40 Aux= 08:46:40 Message to Camera, serial 137157 queued 08:47:17 Received message from Master: op=PointingHead serial=137170 08:47:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:47:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:47:17 Point started: ret=0 08:47:17 point_skyscan result=0 08:47:18 Check angles 08:47:18 SkyScan query 08:47:19 SkyScan query done: ret=0 az=152.865<-10191 ze=-21.465<-13431 Statuses=0009 0009 08:47:19 Msec=0 True Az=152.865 Ze=-21.465 Az status=0009 Ze status=0009 08:47:19 Check angles 08:47:19 SkyScan query 08:47:19 SkyScan query done: ret=0 az=134.895<-8993 ze=-0.09<-12006 Statuses=0009 0009 08:47:19 Msec=750 True Az=134.895 Ze=-0.09 Az status=0009 Ze status=0009 08:47:20 Check angles 08:47:20 SkyScan query 08:47:20 SkyScan query done: ret=0 az=117.435<-7829 ze=20.895<-10607 Statuses=0009 0009 08:47:20 Msec=1500 True Az=117.435 Ze=20.895 Az status=0009 Ze status=0009 08:47:20 Check angles 08:47:20 SkyScan query 08:47:21 SkyScan query done: ret=0 az=100.065<-6671 ze=41.82<-9212 Statuses=0009 0009 08:47:21 Msec=2250 True Az=100.065 Ze=41.82 Az status=0009 Ze status=0009 08:47:21 Check angles 08:47:21 SkyScan query 08:47:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 08:47:22 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 08:47:22 Check angles 08:47:22 SkyScan query 08:47:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:47:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:47:22 Message to Master queued w/err=0: serial=137170 error=0 08:47:27 Received message from Master: op=Filter serial=137171 08:47:27 Color wheel filter change from 0 to 0 08:47:27 FLIGetFilterPos err=0 currentPosition=0 08:47:27 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:27 Filter is already there-color wheel unchanged 08:47:28 Received message from Master: op=Shutter serial=137172 08:47:28 Shutter LASER close 08:47:28 Received message from Camera: op=State serial=137174 08:47:28 GetSingleValue result=40 Value=cccccccc 08:47:28 SkyScan query 08:47:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:47:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:28 Parameters OK 08:47:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:28 Set A/D data flow result=40 08:47:28 Set A/D channel type result=40 08:47:28 Set A/D encoding result=40 08:47:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:28 Set channel filter=0.000000e+000 result=40 08:47:28 Config A/D Result=40 08:47:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:28 Get A/D filter: -9.255963e+061 result=40 08:47:28 Get A/D value=-858993460 result=40 08:47:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:28 Parameters OK 08:47:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:28 Set A/D data flow result=40 08:47:28 Set A/D channel type result=40 08:47:28 Set A/D encoding result=40 08:47:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:28 Set channel filter=0.000000e+000 result=40 08:47:28 Config A/D Result=40 08:47:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:28 Get A/D filter: -9.255963e+061 result=40 08:47:28 Get A/D value=-858993460 result=40 08:47:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:28 Aux= 08:47:28 Message to Camera, serial 137174 queued 08:48:05 Received message from Master: op=PointingHead serial=137187 08:48:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:48:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:48:05 Point started: ret=0 08:48:05 point_skyscan result=0 08:48:06 Check angles 08:48:06 SkyScan query 08:48:07 SkyScan query done: ret=0 az=109.245<-7283 ze=38.49<-9434 Statuses=0009 0008 08:48:07 Msec=0 True Az=109.245 Ze=38.49 Az status=0009 Ze status=0008 08:48:07 Check angles 08:48:07 SkyScan query 08:48:07 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 08:48:07 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 08:48:08 Check angles 08:48:08 SkyScan query 08:48:08 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 08:48:08 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 08:48:08 Check angles 08:48:08 SkyScan query 08:48:09 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 08:48:09 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 08:48:09 Check angles 08:48:09 SkyScan query 08:48:10 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:48:10 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:48:10 Check angles 08:48:10 SkyScan query 08:48:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:48:10 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:48:10 Message to Master queued w/err=0: serial=137187 error=0 08:48:15 Received message from Master: op=Filter serial=137188 08:48:15 Color wheel filter change from 0 to 0 08:48:15 FLIGetFilterPos err=0 currentPosition=0 08:48:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:15 Filter is already there-color wheel unchanged 08:48:16 Received message from Master: op=Shutter serial=137189 08:48:16 Shutter LASER close 08:48:16 Received message from Camera: op=State serial=137191 08:48:16 GetSingleValue result=40 Value=cccccccc 08:48:16 SkyScan query 08:48:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:48:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:16 Parameters OK 08:48:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:16 Set A/D data flow result=40 08:48:16 Set A/D channel type result=40 08:48:16 Set A/D encoding result=40 08:48:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:16 Set channel filter=0.000000e+000 result=40 08:48:16 Config A/D Result=40 08:48:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:16 Get A/D filter: -9.255963e+061 result=40 08:48:16 Get A/D value=-858993460 result=40 08:48:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:16 Parameters OK 08:48:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:16 Set A/D data flow result=40 08:48:16 Set A/D channel type result=40 08:48:16 Set A/D encoding result=40 08:48:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:16 Set channel filter=0.000000e+000 result=40 08:48:16 Config A/D Result=40 08:48:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:16 Get A/D filter: -9.255963e+061 result=40 08:48:16 Get A/D value=-858993460 result=40 08:48:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:16 Aux= 08:48:16 Message to Camera, serial 137191 queued 08:48:53 Received message from Master: op=PointingHead serial=137204 08:48:53 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:48:53 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:48:53 Point started: ret=0 08:48:53 point_skyscan result=0 08:48:54 Check angles 08:48:54 SkyScan query 08:48:55 SkyScan query done: ret=0 az=153.27<-10218 ze=9.015<-11399 Statuses=0009 0009 08:48:55 Msec=0 True Az=153.27 Ze=9.015 Az status=0009 Ze status=0009 08:48:55 Check angles 08:48:55 SkyScan query 08:48:56 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.39<-12826 Statuses=0009 0009 08:48:56 Msec=750 True Az=135.315 Ze=-12.39 Az status=0009 Ze status=0009 08:48:56 Check angles 08:48:56 SkyScan query 08:48:56 SkyScan query done: ret=0 az=117.9<-7860 ze=-33.345<-14223 Statuses=0009 0009 08:48:56 Msec=1500 True Az=117.9 Ze=-33.345 Az status=0009 Ze status=0009 08:48:56 Check angles 08:48:56 SkyScan query 08:48:57 SkyScan query done: ret=0 az=100.515<-6701 ze=-51.555<-15437 Statuses=0009 0009 08:48:57 Msec=2250 True Az=100.515 Ze=-51.555 Az status=0009 Ze status=0009 08:48:57 Check angles 08:48:57 SkyScan query 08:48:58 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 08:48:58 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 08:48:58 Check angles 08:48:58 SkyScan query 08:48:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:48:59 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:48:59 Message to Master queued w/err=0: serial=137204 error=0 08:49:04 Received message from Master: op=Filter serial=137205 08:49:04 Color wheel filter change from 0 to 0 08:49:04 FLIGetFilterPos err=0 currentPosition=0 08:49:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:04 Filter is already there-color wheel unchanged 08:49:04 Received message from Master: op=Shutter serial=137206 08:49:04 Shutter LASER close 08:49:04 Received message from Camera: op=State serial=137208 08:49:04 GetSingleValue result=40 Value=cccccccc 08:49:04 SkyScan query 08:49:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:49:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:04 Parameters OK 08:49:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:04 Set A/D data flow result=40 08:49:04 Set A/D channel type result=40 08:49:04 Set A/D encoding result=40 08:49:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:04 Set channel filter=0.000000e+000 result=40 08:49:04 Config A/D Result=40 08:49:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:04 Get A/D filter: -9.255963e+061 result=40 08:49:04 Get A/D value=-858993460 result=40 08:49:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:04 Parameters OK 08:49:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:04 Set A/D data flow result=40 08:49:04 Set A/D channel type result=40 08:49:04 Set A/D encoding result=40 08:49:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:04 Set channel filter=0.000000e+000 result=40 08:49:04 Config A/D Result=40 08:49:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:04 Get A/D filter: -9.255963e+061 result=40 08:49:04 Get A/D value=-858993460 result=40 08:49:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:04 Aux= 08:49:04 Message to Camera, serial 137208 queued 08:49:41 Received message from Master: op=PointingHead serial=137221 08:49:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:49:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:49:41 Point started: ret=0 08:49:41 point_skyscan result=0 08:49:42 Check angles 08:49:42 SkyScan query 08:49:43 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.75<-17450 Statuses=0009 0009 08:49:43 Msec=0 True Az=109.38 Ze=-81.75 Az status=0009 Ze status=0009 08:49:43 Check angles 08:49:43 SkyScan query 08:49:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.125<-18875 Statuses=0008 0009 08:49:44 Msec=750 True Az=112.995 Ze=-103.125 Az status=0008 Ze status=0009 08:49:44 Check angles 08:49:44 SkyScan query 08:49:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.485<-20299 Statuses=0008 0009 08:49:44 Msec=1500 True Az=112.995 Ze=-124.485 Az status=0008 Ze status=0009 08:49:45 Check angles 08:49:45 SkyScan query 08:49:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.47<-21698 Statuses=0008 0009 08:49:45 Msec=2250 True Az=112.995 Ze=-145.47 Az status=0008 Ze status=0009 08:49:45 Check angles 08:49:45 SkyScan query 08:49:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.41<-23094 Statuses=0008 0009 08:49:46 Msec=3000 True Az=112.995 Ze=-166.41 Az status=0008 Ze status=0009 08:49:46 Check angles 08:49:46 SkyScan query 08:49:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:49:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:49:47 Message to Master queued w/err=0: serial=137221 error=0 08:49:52 Received message from Master: op=Filter serial=137222 08:49:52 Color wheel filter change from 0 to 0 08:49:52 FLIGetFilterPos err=0 currentPosition=0 08:49:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:52 Filter is already there-color wheel unchanged 08:49:52 Received message from Master: op=Shutter serial=137223 08:49:52 Shutter LASER open 08:49:52 Received message from Camera: op=State serial=137225 08:49:52 GetSingleValue result=40 Value=cccccccc 08:49:52 SkyScan query 08:49:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:49:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:53 Parameters OK 08:49:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:53 Set A/D data flow result=40 08:49:53 Set A/D channel type result=40 08:49:53 Set A/D encoding result=40 08:49:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:53 Set channel filter=0.000000e+000 result=40 08:49:53 Config A/D Result=40 08:49:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:53 Get A/D filter: -9.255963e+061 result=40 08:49:53 Get A/D value=-858993460 result=40 08:49:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:53 Parameters OK 08:49:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:53 Set A/D data flow result=40 08:49:53 Set A/D channel type result=40 08:49:53 Set A/D encoding result=40 08:49:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:53 Set channel filter=0.000000e+000 result=40 08:49:53 Config A/D Result=40 08:49:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:53 Get A/D filter: -9.255963e+061 result=40 08:49:53 Get A/D value=-858993460 result=40 08:49:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:53 Aux= 08:49:53 Message to Camera, serial 137225 queued 08:50:01 Received message from Master: op=Shutter serial=137235 08:50:01 Shutter LASER close 08:50:01 Received message from Master: op=PointingHead serial=137239 08:50:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:50:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:50:02 Point started: ret=0 08:50:02 point_skyscan result=0 08:50:02 Check angles 08:50:02 SkyScan query 08:50:03 SkyScan query done: ret=0 az=89.85<-5990 ze=157.125<-1525 Statuses=0009 0009 08:50:03 Msec=0 True Az=89.85 Ze=157.125 Az status=0009 Ze status=0009 08:50:03 Check angles 08:50:03 SkyScan query 08:50:04 SkyScan query done: ret=0 az=72.015<-4801 ze=135.75<-2950 Statuses=0009 0009 08:50:04 Msec=750 True Az=72.015 Ze=135.75 Az status=0009 Ze status=0009 08:50:04 Check angles 08:50:04 SkyScan query 08:50:05 SkyScan query done: ret=0 az=54.555<-3637 ze=114.75<-4350 Statuses=0009 0009 08:50:05 Msec=1500 True Az=54.555 Ze=114.75 Az status=0009 Ze status=0009 08:50:05 Check angles 08:50:05 SkyScan query 08:50:05 SkyScan query done: ret=0 az=40.98<-2732 ze=93.825<-5745 Statuses=0009 0009 08:50:05 Msec=2250 True Az=40.98 Ze=93.825 Az status=0009 Ze status=0009 08:50:06 Check angles 08:50:06 SkyScan query 08:50:06 SkyScan query done: ret=0 az=40.995<-2733 ze=72.405<-7173 Statuses=0008 0009 08:50:06 Msec=3000 True Az=40.995 Ze=72.405 Az status=0008 Ze status=0009 08:50:06 Check angles 08:50:06 SkyScan query 08:50:07 SkyScan query done: ret=0 az=40.995<-2733 ze=52.05<-8530 Statuses=0008 0009 08:50:07 Msec=3750 True Az=40.995 Ze=52.05 Az status=0008 Ze status=0009 08:50:07 Check angles 08:50:07 SkyScan query 08:50:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:50:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:50:08 Message to Master queued w/err=0: serial=137239 error=0 08:50:13 Received message from Master: op=Filter serial=137240 08:50:13 Color wheel filter change from 0 to 0 08:50:13 FLIGetFilterPos err=0 currentPosition=0 08:50:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:13 Filter is already there-color wheel unchanged 08:50:13 Received message from Master: op=Shutter serial=137241 08:50:13 Shutter LASER close 08:50:13 Received message from Camera: op=State serial=137243 08:50:13 GetSingleValue result=40 Value=cccccccc 08:50:13 SkyScan query 08:50:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:50:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:14 Parameters OK 08:50:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:14 Set A/D data flow result=40 08:50:14 Set A/D channel type result=40 08:50:14 Set A/D encoding result=40 08:50:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:14 Set channel filter=0.000000e+000 result=40 08:50:14 Config A/D Result=40 08:50:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:14 Get A/D filter: -9.255963e+061 result=40 08:50:14 Get A/D value=-858993460 result=40 08:50:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:14 Parameters OK 08:50:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:14 Set A/D data flow result=40 08:50:14 Set A/D channel type result=40 08:50:14 Set A/D encoding result=40 08:50:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:14 Set channel filter=0.000000e+000 result=40 08:50:14 Config A/D Result=40 08:50:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:14 Get A/D filter: -9.255963e+061 result=40 08:50:14 Get A/D value=-858993460 result=40 08:50:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:14 Aux= 08:50:14 Message to Camera, serial 137243 queued 08:50:50 Received message from Master: op=PointingHead serial=137256 08:50:50 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:50:50 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:50:51 Point started: ret=0 08:50:51 point_skyscan result=0 08:50:51 Check angles 08:50:51 SkyScan query 08:50:52 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 08:50:52 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 08:50:52 Check angles 08:50:52 SkyScan query 08:50:53 SkyScan query done: ret=0 az=82.125<-5475 ze=66.495<-7567 Statuses=0009 0008 08:50:53 Msec=750 True Az=82.125 Ze=66.495 Az status=0009 Ze status=0008 08:50:53 Check angles 08:50:53 SkyScan query 08:50:54 SkyScan query done: ret=0 az=99.675<-6645 ze=66.495<-7567 Statuses=0009 0008 08:50:54 Msec=1500 True Az=99.675 Ze=66.495 Az status=0009 Ze status=0008 08:50:54 Check angles 08:50:54 SkyScan query 08:50:54 SkyScan query done: ret=0 az=117.105<-7807 ze=66.495<-7567 Statuses=0009 0008 08:50:54 Msec=2250 True Az=117.105 Ze=66.495 Az status=0009 Ze status=0008 08:50:54 Check angles 08:50:54 SkyScan query 08:50:55 SkyScan query done: ret=0 az=134.595<-8973 ze=66.495<-7567 Statuses=0009 0008 08:50:55 Msec=3000 True Az=134.595 Ze=66.495 Az status=0009 Ze status=0008 08:50:55 Check angles 08:50:55 SkyScan query 08:50:56 SkyScan query done: ret=0 az=152.01<-10134 ze=66.495<-7567 Statuses=0009 0008 08:50:56 Msec=3750 True Az=152.01 Ze=66.495 Az status=0009 Ze status=0008 08:50:56 Check angles 08:50:56 SkyScan query 08:50:57 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:50:57 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:50:57 Message to Master queued w/err=0: serial=137256 error=0 08:51:02 Received message from Master: op=Filter serial=137257 08:51:02 Color wheel filter change from 0 to 0 08:51:02 FLIGetFilterPos err=0 currentPosition=0 08:51:02 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:02 Filter is already there-color wheel unchanged 08:51:02 Received message from Master: op=Shutter serial=137258 08:51:02 Shutter LASER close 08:51:02 Received message from Camera: op=State serial=137260 08:51:02 GetSingleValue result=40 Value=cccccccc 08:51:02 SkyScan query 08:51:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:51:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:02 Parameters OK 08:51:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:02 Set A/D data flow result=40 08:51:02 Set A/D channel type result=40 08:51:02 Set A/D encoding result=40 08:51:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:02 Set channel filter=0.000000e+000 result=40 08:51:02 Config A/D Result=40 08:51:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:02 Get A/D filter: -9.255963e+061 result=40 08:51:02 Get A/D value=-858993460 result=40 08:51:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:02 Parameters OK 08:51:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:02 Set A/D data flow result=40 08:51:02 Set A/D channel type result=40 08:51:02 Set A/D encoding result=40 08:51:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:02 Set channel filter=0.000000e+000 result=40 08:51:02 Config A/D Result=40 08:51:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:02 Get A/D filter: -9.255963e+061 result=40 08:51:02 Get A/D value=-858993460 result=40 08:51:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:02 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:02 Aux= 08:51:02 Message to Camera, serial 137260 queued 08:51:39 Received message from Master: op=PointingHead serial=137273 08:51:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:51:39 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:51:40 Point started: ret=0 08:51:40 point_skyscan result=0 08:51:40 Check angles 08:51:40 SkyScan query 08:51:41 SkyScan query done: ret=0 az=135.105<-9007 ze=36.915<-9539 Statuses=0009 0009 08:51:41 Msec=0 True Az=135.105 Ze=36.915 Az status=0009 Ze status=0009 08:51:41 Check angles 08:51:41 SkyScan query 08:51:42 SkyScan query done: ret=0 az=117.27<-7818 ze=15.6<-10960 Statuses=0009 0009 08:51:42 Msec=750 True Az=117.27 Ze=15.6 Az status=0009 Ze status=0009 08:51:42 Check angles 08:51:42 SkyScan query 08:51:42 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.4<-12360 Statuses=0009 0009 08:51:42 Msec=1500 True Az=99.855 Ze=-5.4 Az status=0009 Ze status=0009 08:51:43 Check angles 08:51:43 SkyScan query 08:51:43 SkyScan query done: ret=0 az=82.395<-5493 ze=-26.34<-13756 Statuses=0009 0009 08:51:43 Msec=2250 True Az=82.395 Ze=-26.34 Az status=0009 Ze status=0009 08:51:43 Check angles 08:51:43 SkyScan query 08:51:44 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.58<-14572 Statuses=0009 0008 08:51:44 Msec=3000 True Az=64.86 Ze=-38.58 Az status=0009 Ze status=0008 08:51:44 Check angles 08:51:44 SkyScan query 08:51:45 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.52<-14568 Statuses=0009 0008 08:51:45 Msec=3750 True Az=47.355 Ze=-38.52 Az status=0009 Ze status=0008 08:51:45 Check angles 08:51:45 SkyScan query 08:51:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:51:45 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:51:45 Message to Master queued w/err=0: serial=137273 error=0 08:51:50 Received message from Master: op=Filter serial=137274 08:51:50 Color wheel filter change from 0 to 0 08:51:50 FLIGetFilterPos err=0 currentPosition=0 08:51:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:50 Filter is already there-color wheel unchanged 08:51:51 Received message from Master: op=Shutter serial=137275 08:51:51 Shutter LASER close 08:51:51 Received message from Camera: op=State serial=137277 08:51:51 GetSingleValue result=40 Value=cccccccc 08:51:51 SkyScan query 08:51:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:51:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:51 Parameters OK 08:51:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:51 Set A/D data flow result=40 08:51:51 Set A/D channel type result=40 08:51:51 Set A/D encoding result=40 08:51:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:51 Set channel filter=0.000000e+000 result=40 08:51:51 Config A/D Result=40 08:51:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:51 Get A/D filter: -9.255963e+061 result=40 08:51:51 Get A/D value=-858993460 result=40 08:51:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:51 Parameters OK 08:51:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:51 Set A/D data flow result=40 08:51:51 Set A/D channel type result=40 08:51:51 Set A/D encoding result=40 08:51:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:51 Set channel filter=0.000000e+000 result=40 08:51:51 Config A/D Result=40 08:51:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:51 Get A/D filter: -9.255963e+061 result=40 08:51:51 Get A/D value=-858993460 result=40 08:51:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:51 Aux= 08:51:51 Message to Camera, serial 137277 queued 08:52:28 Received message from Master: op=PointingHead serial=137290 08:52:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:52:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:52:28 Point started: ret=0 08:52:28 point_skyscan result=0 08:52:29 Check angles 08:52:29 SkyScan query 08:52:30 SkyScan query done: ret=0 az=63.735<-4249 ze=-68.055<-16537 Statuses=0009 0009 08:52:30 Msec=0 True Az=63.735 Ze=-68.055 Az status=0009 Ze status=0009 08:52:30 Check angles 08:52:30 SkyScan query 08:52:30 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.415<-17961 Statuses=0009 0009 08:52:30 Msec=750 True Az=81.57 Ze=-89.415 Az status=0009 Ze status=0009 08:52:31 Check angles 08:52:31 SkyScan query 08:52:31 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.82<-19388 Statuses=0009 0009 08:52:31 Msec=1500 True Az=99.36 Ze=-110.82 Az status=0009 Ze status=0009 08:52:31 Check angles 08:52:31 SkyScan query 08:52:32 SkyScan query done: ret=0 az=117.03<-7802 ze=-131.73<-20782 Statuses=0009 0009 08:52:32 Msec=2250 True Az=117.03 Ze=-131.73 Az status=0009 Ze status=0009 08:52:32 Check angles 08:52:32 SkyScan query 08:52:33 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 08:52:33 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 08:52:33 Check angles 08:52:33 SkyScan query 08:52:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 08:52:33 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 08:52:33 Message to Master queued w/err=0: serial=137290 error=0 08:52:38 Received message from Master: op=Filter serial=137291 08:52:38 Color wheel filter change from 0 to 0 08:52:38 FLIGetFilterPos err=0 currentPosition=0 08:52:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:38 Filter is already there-color wheel unchanged 08:52:39 Received message from Master: op=Shutter serial=137292 08:52:39 Shutter LASER close 08:52:39 Received message from Camera: op=State serial=137294 08:52:39 GetSingleValue result=40 Value=cccccccc 08:52:39 SkyScan query 08:52:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:52:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:39 Parameters OK 08:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:39 Set A/D data flow result=40 08:52:39 Set A/D channel type result=40 08:52:39 Set A/D encoding result=40 08:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:39 Set channel filter=0.000000e+000 result=40 08:52:39 Config A/D Result=40 08:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:39 Get A/D filter: -9.255963e+061 result=40 08:52:39 Get A/D value=-858993460 result=40 08:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:39 Parameters OK 08:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:39 Set A/D data flow result=40 08:52:39 Set A/D channel type result=40 08:52:39 Set A/D encoding result=40 08:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:39 Set channel filter=0.000000e+000 result=40 08:52:39 Config A/D Result=40 08:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:39 Get A/D filter: -9.255963e+061 result=40 08:52:39 Get A/D value=-858993460 result=40 08:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:39 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:39 Aux= 08:52:39 Message to Camera, serial 137294 queued 08:53:16 Received message from Master: op=PointingHead serial=137307 08:53:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:53:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:53:16 Point started: ret=0 08:53:16 point_skyscan result=0 08:53:17 Check angles 08:53:17 SkyScan query 08:53:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 08:53:18 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 08:53:18 Check angles 08:53:18 SkyScan query 08:53:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:53:19 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:53:19 Message to Master queued w/err=0: serial=137307 error=0 08:53:24 Received message from Master: op=Filter serial=137308 08:53:24 Color wheel filter change from 0 to 0 08:53:24 FLIGetFilterPos err=0 currentPosition=0 08:53:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:24 Filter is already there-color wheel unchanged 08:53:24 Received message from Master: op=Shutter serial=137309 08:53:24 Shutter LASER open 08:53:24 Received message from Camera: op=State serial=137311 08:53:24 GetSingleValue result=40 Value=cccccccc 08:53:24 SkyScan query 08:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:53:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:24 Parameters OK 08:53:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:24 Set A/D data flow result=40 08:53:24 Set A/D channel type result=40 08:53:24 Set A/D encoding result=40 08:53:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:24 Set channel filter=0.000000e+000 result=40 08:53:24 Config A/D Result=40 08:53:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:24 Get A/D filter: -9.255963e+061 result=40 08:53:24 Get A/D value=-858993460 result=40 08:53:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:24 Parameters OK 08:53:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:24 Set A/D data flow result=40 08:53:24 Set A/D channel type result=40 08:53:24 Set A/D encoding result=40 08:53:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:24 Set channel filter=0.000000e+000 result=40 08:53:24 Config A/D Result=40 08:53:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:24 Get A/D filter: -9.255963e+061 result=40 08:53:24 Get A/D value=-858993460 result=40 08:53:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:24 Aux= 08:53:24 Message to Camera, serial 137311 queued 08:53:33 Received message from Master: op=Shutter serial=137321 08:53:33 Shutter LASER close 08:53:33 Received message from Master: op=PointingHead serial=137325 08:53:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:53:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:53:34 Point started: ret=0 08:53:34 point_skyscan result=0 08:53:35 Check angles 08:53:35 SkyScan query 08:53:35 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.325<-21555 Statuses=0009 0009 08:53:35 Msec=0 True Az=135.915 Ze=-143.325 Az status=0009 Ze status=0009 08:53:35 Check angles 08:53:35 SkyScan query 08:53:36 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.31<-20154 Statuses=0009 0009 08:53:36 Msec=750 True Az=153.39 Ze=-122.31 Az status=0009 Ze status=0009 08:53:36 Check angles 08:53:36 SkyScan query 08:53:37 SkyScan query done: ret=0 az=171.3<-11420 ze=-100.935<-18729 Statuses=0009 0009 08:53:37 Msec=1500 True Az=171.3 Ze=-100.935 Az status=0009 Ze status=0009 08:53:37 Check angles 08:53:37 SkyScan query 08:53:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.04<-17336 Statuses=0008 0009 08:53:37 Msec=2250 True Az=176.01 Ze=-80.04 Az status=0008 Ze status=0009 08:53:38 Check angles 08:53:38 SkyScan query 08:53:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.04<-15936 Statuses=0008 0009 08:53:38 Msec=3000 True Az=176.01 Ze=-59.04 Az status=0008 Ze status=0009 08:53:38 Check angles 08:53:38 SkyScan query 08:53:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:53:39 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:53:39 Message to Master queued w/err=0: serial=137325 error=0 08:53:44 Received message from Master: op=Filter serial=137326 08:53:44 Color wheel filter change from 0 to 0 08:53:44 FLIGetFilterPos err=0 currentPosition=0 08:53:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:44 Filter is already there-color wheel unchanged 08:53:44 Received message from Master: op=Shutter serial=137327 08:53:44 Shutter LASER close 08:53:44 Received message from Camera: op=State serial=137329 08:53:44 GetSingleValue result=40 Value=cccccccc 08:53:44 SkyScan query 08:53:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:53:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:45 Parameters OK 08:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:45 Set A/D data flow result=40 08:53:45 Set A/D channel type result=40 08:53:45 Set A/D encoding result=40 08:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:45 Set channel filter=0.000000e+000 result=40 08:53:45 Config A/D Result=40 08:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:45 Get A/D filter: -9.255963e+061 result=40 08:53:45 Get A/D value=-858993460 result=40 08:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:45 Parameters OK 08:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:45 Set A/D data flow result=40 08:53:45 Set A/D channel type result=40 08:53:45 Set A/D encoding result=40 08:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:45 Set channel filter=0.000000e+000 result=40 08:53:45 Config A/D Result=40 08:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:45 Get A/D filter: -9.255963e+061 result=40 08:53:45 Get A/D value=-858993460 result=40 08:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:45 Aux= 08:53:45 Message to Camera, serial 137329 queued 08:54:21 Received message from Master: op=PointingHead serial=137341 08:54:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:54:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:54:21 Point started: ret=0 08:54:21 point_skyscan result=0 08:54:22 Check angles 08:54:22 SkyScan query 08:54:22 SkyScan query done: ret=0 az=152.64<-10176 ze=-21.195<-13413 Statuses=0009 0009 08:54:22 Msec=0 True Az=152.64 Ze=-21.195 Az status=0009 Ze status=0009 08:54:23 Check angles 08:54:23 SkyScan query 08:54:23 SkyScan query done: ret=0 az=134.55<-8970 ze=0.165<-11989 Statuses=0009 0009 08:54:23 Msec=750 True Az=134.55 Ze=0.165 Az status=0009 Ze status=0009 08:54:23 Check angles 08:54:23 SkyScan query 08:54:24 SkyScan query done: ret=0 az=117.27<-7818 ze=21.165<-10589 Statuses=0009 0009 08:54:24 Msec=1500 True Az=117.27 Ze=21.165 Az status=0009 Ze status=0009 08:54:24 Check angles 08:54:24 SkyScan query 08:54:25 SkyScan query done: ret=0 az=99.45<-6630 ze=42.495<-9167 Statuses=0009 0009 08:54:25 Msec=2250 True Az=99.45 Ze=42.495 Az status=0009 Ze status=0009 08:54:25 Check angles 08:54:25 SkyScan query 08:54:25 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 08:54:25 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 08:54:26 Check angles 08:54:26 SkyScan query 08:54:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:54:26 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:54:26 Message to Master queued w/err=0: serial=137341 error=0 08:54:31 Received message from Master: op=Filter serial=137342 08:54:31 Color wheel filter change from 0 to 0 08:54:31 FLIGetFilterPos err=0 currentPosition=0 08:54:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:31 Filter is already there-color wheel unchanged 08:54:31 Received message from Master: op=Shutter serial=137343 08:54:31 Shutter LASER close 08:54:31 Received message from Camera: op=State serial=137345 08:54:31 GetSingleValue result=40 Value=cccccccc 08:54:31 SkyScan query 08:54:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:54:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:32 Parameters OK 08:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:32 Set A/D data flow result=40 08:54:32 Set A/D channel type result=40 08:54:32 Set A/D encoding result=40 08:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:32 Set channel filter=0.000000e+000 result=40 08:54:32 Config A/D Result=40 08:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:32 Get A/D filter: -9.255963e+061 result=40 08:54:32 Get A/D value=-858993460 result=40 08:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:32 Parameters OK 08:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:32 Set A/D data flow result=40 08:54:32 Set A/D channel type result=40 08:54:32 Set A/D encoding result=40 08:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:32 Set channel filter=0.000000e+000 result=40 08:54:32 Config A/D Result=40 08:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:32 Get A/D filter: -9.255963e+061 result=40 08:54:32 Get A/D value=-858993460 result=40 08:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:32 Aux= 08:54:32 Message to Camera, serial 137345 queued 08:55:09 Received message from Master: op=PointingHead serial=137358 08:55:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:55:09 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:55:09 Point started: ret=0 08:55:09 point_skyscan result=0 08:55:10 Check angles 08:55:10 SkyScan query 08:55:11 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 08:55:11 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 08:55:11 Check angles 08:55:11 SkyScan query 08:55:11 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 08:55:11 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 08:55:11 Check angles 08:55:11 SkyScan query 08:55:12 SkyScan query done: ret=0 az=143.88<-9592 ze=38.505<-9433 Statuses=0009 0008 08:55:12 Msec=1500 True Az=143.88 Ze=38.505 Az status=0009 Ze status=0008 08:55:12 Check angles 08:55:12 SkyScan query 08:55:13 SkyScan query done: ret=0 az=161.295<-10753 ze=38.505<-9433 Statuses=0009 0008 08:55:13 Msec=2250 True Az=161.295 Ze=38.505 Az status=0009 Ze status=0008 08:55:13 Check angles 08:55:13 SkyScan query 08:55:14 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:55:14 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:55:14 Check angles 08:55:14 SkyScan query 08:55:14 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:55:14 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:55:14 Message to Master queued w/err=0: serial=137358 error=0 08:55:19 Received message from Master: op=Filter serial=137359 08:55:19 Color wheel filter change from 0 to 0 08:55:19 FLIGetFilterPos err=0 currentPosition=0 08:55:19 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:19 Filter is already there-color wheel unchanged 08:55:19 Received message from Master: op=Shutter serial=137360 08:55:19 Shutter LASER close 08:55:20 Received message from Camera: op=State serial=137362 08:55:20 GetSingleValue result=40 Value=cccccccc 08:55:20 SkyScan query 08:55:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:55:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:20 Parameters OK 08:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:20 Set A/D data flow result=40 08:55:20 Set A/D channel type result=40 08:55:20 Set A/D encoding result=40 08:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:20 Set channel filter=0.000000e+000 result=40 08:55:20 Config A/D Result=40 08:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:20 Get A/D filter: -9.255963e+061 result=40 08:55:20 Get A/D value=-858993460 result=40 08:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:20 Parameters OK 08:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:20 Set A/D data flow result=40 08:55:20 Set A/D channel type result=40 08:55:20 Set A/D encoding result=40 08:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:20 Set channel filter=0.000000e+000 result=40 08:55:20 Config A/D Result=40 08:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:20 Get A/D filter: -9.255963e+061 result=40 08:55:20 Get A/D value=-858993460 result=40 08:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:20 Aux= 08:55:20 Message to Camera, serial 137362 queued [UTC 2018-12-14 08:55:52] 08:55:57 Received message from Master: op=PointingHead serial=137375 08:55:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:55:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:55:57 Point started: ret=0 08:55:57 point_skyscan result=0 08:55:58 Check angles 08:55:58 SkyScan query 08:55:59 SkyScan query done: ret=0 az=152.64<-10176 ze=8.145<-11457 Statuses=0009 0009 08:55:59 Msec=0 True Az=152.64 Ze=8.145 Az status=0009 Ze status=0009 08:55:59 Check angles 08:55:59 SkyScan query 08:55:59 SkyScan query done: ret=0 az=135.045<-9003 ze=-12.72<-12848 Statuses=0009 0009 08:55:59 Msec=750 True Az=135.045 Ze=-12.72 Az status=0009 Ze status=0009 08:56:00 Check angles 08:56:00 SkyScan query 08:56:00 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.75<-14250 Statuses=0009 0009 08:56:00 Msec=1500 True Az=117.57 Ze=-33.75 Az status=0009 Ze status=0009 08:56:00 Check angles 08:56:00 SkyScan query 08:56:01 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.57<-15438 Statuses=0009 0009 08:56:01 Msec=2250 True Az=100.215 Ze=-51.57 Az status=0009 Ze status=0009 08:56:01 Check angles 08:56:01 SkyScan query 08:56:02 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 08:56:02 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 08:56:02 Check angles 08:56:02 SkyScan query 08:56:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:56:02 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:56:02 Message to Master queued w/err=0: serial=137375 error=0 08:56:07 Received message from Master: op=Filter serial=137376 08:56:07 Color wheel filter change from 0 to 0 08:56:07 FLIGetFilterPos err=0 currentPosition=0 08:56:07 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:07 Filter is already there-color wheel unchanged 08:56:08 Received message from Master: op=Shutter serial=137377 08:56:08 Shutter LASER close 08:56:08 Received message from Camera: op=State serial=137379 08:56:08 GetSingleValue result=40 Value=cccccccc 08:56:08 SkyScan query 08:56:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:56:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:08 Parameters OK 08:56:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:08 Set A/D data flow result=40 08:56:08 Set A/D channel type result=40 08:56:08 Set A/D encoding result=40 08:56:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:08 Set channel filter=0.000000e+000 result=40 08:56:08 Config A/D Result=40 08:56:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:08 Get A/D filter: -9.255963e+061 result=40 08:56:08 Get A/D value=-858993460 result=40 08:56:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:08 Parameters OK 08:56:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:08 Set A/D data flow result=40 08:56:08 Set A/D channel type result=40 08:56:08 Set A/D encoding result=40 08:56:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:08 Set channel filter=0.000000e+000 result=40 08:56:08 Config A/D Result=40 08:56:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:08 Get A/D filter: -9.255963e+061 result=40 08:56:08 Get A/D value=-858993460 result=40 08:56:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:08 Aux= 08:56:08 Message to Camera, serial 137379 queued 08:56:45 Received message from Master: op=PointingHead serial=137392 08:56:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:56:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:56:45 Point started: ret=0 08:56:45 point_skyscan result=0 08:56:46 Check angles 08:56:46 SkyScan query 08:56:47 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.345<-17423 Statuses=0009 0009 08:56:47 Msec=0 True Az=109.02 Ze=-81.345 Az status=0009 Ze status=0009 08:56:47 Check angles 08:56:47 SkyScan query 08:56:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.3<-18820 Statuses=0008 0009 08:56:47 Msec=750 True Az=112.995 Ze=-102.3 Az status=0008 Ze status=0009 08:56:48 Check angles 08:56:48 SkyScan query 08:56:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 08:56:48 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 08:56:48 Check angles 08:56:48 SkyScan query 08:56:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.585<-21639 Statuses=0008 0009 08:56:49 Msec=2250 True Az=112.995 Ze=-144.585 Az status=0008 Ze status=0009 08:56:49 Check angles 08:56:49 SkyScan query 08:56:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 08:56:50 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 08:56:50 Check angles 08:56:50 SkyScan query 08:56:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:56:50 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:56:50 Message to Master queued w/err=0: serial=137392 error=0 08:56:55 Received message from Master: op=Filter serial=137393 08:56:55 Color wheel filter change from 0 to 0 08:56:55 FLIGetFilterPos err=0 currentPosition=0 08:56:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:55 Filter is already there-color wheel unchanged 08:56:56 Received message from Master: op=Shutter serial=137394 08:56:56 Shutter LASER open 08:56:56 Received message from Camera: op=State serial=137396 08:56:56 GetSingleValue result=40 Value=cccccccc 08:56:56 SkyScan query 08:56:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:56:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:56 Parameters OK 08:56:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:56 Set A/D data flow result=40 08:56:56 Set A/D channel type result=40 08:56:56 Set A/D encoding result=40 08:56:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:56 Set channel filter=0.000000e+000 result=40 08:56:56 Config A/D Result=40 08:56:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:56 Get A/D filter: -9.255963e+061 result=40 08:56:56 Get A/D value=-858993460 result=40 08:56:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:56 Parameters OK 08:56:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:56 Set A/D data flow result=40 08:56:56 Set A/D channel type result=40 08:56:56 Set A/D encoding result=40 08:56:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:56 Set channel filter=0.000000e+000 result=40 08:56:56 Config A/D Result=40 08:56:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:56 Get A/D filter: -9.255963e+061 result=40 08:56:56 Get A/D value=-858993460 result=40 08:56:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:56 Aux= 08:56:56 Message to Camera, serial 137396 queued 08:57:05 Received message from Master: op=Shutter serial=137406 08:57:05 Shutter LASER close 08:57:05 Received message from Master: op=PointingHead serial=137410 08:57:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:57:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:57:06 Point started: ret=0 08:57:06 point_skyscan result=0 08:57:06 Check angles 08:57:06 SkyScan query 08:57:07 SkyScan query done: ret=0 az=89.52<-5968 ze=156.825<-1545 Statuses=0009 0009 08:57:07 Msec=0 True Az=89.52 Ze=156.825 Az status=0009 Ze status=0009 08:57:07 Check angles 08:57:07 SkyScan query 08:57:08 SkyScan query done: ret=0 az=72.015<-4801 ze=135.78<-2948 Statuses=0009 0009 08:57:08 Msec=750 True Az=72.015 Ze=135.78 Az status=0009 Ze status=0009 08:57:08 Check angles 08:57:08 SkyScan query 08:57:08 SkyScan query done: ret=0 az=54.135<-3609 ze=114.435<-4371 Statuses=0009 0009 08:57:08 Msec=1500 True Az=54.135 Ze=114.435 Az status=0009 Ze status=0009 08:57:09 Check angles 08:57:09 SkyScan query 08:57:09 SkyScan query done: ret=0 az=40.995<-2733 ze=93.525<-5765 Statuses=0009 0009 08:57:09 Msec=2250 True Az=40.995 Ze=93.525 Az status=0009 Ze status=0009 08:57:09 Check angles 08:57:09 SkyScan query 08:57:10 SkyScan query done: ret=0 az=40.995<-2733 ze=72.54<-7164 Statuses=0008 0009 08:57:10 Msec=3000 True Az=40.995 Ze=72.54 Az status=0008 Ze status=0009 08:57:10 Check angles 08:57:10 SkyScan query 08:57:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 08:57:11 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 08:57:11 Check angles 08:57:11 SkyScan query 08:57:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:57:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:57:11 Message to Master queued w/err=0: serial=137410 error=0 08:57:16 Received message from Master: op=Filter serial=137411 08:57:16 Color wheel filter change from 0 to 0 08:57:16 FLIGetFilterPos err=0 currentPosition=0 08:57:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:16 Filter is already there-color wheel unchanged 08:57:17 Received message from Master: op=Shutter serial=137412 08:57:17 Shutter LASER close 08:57:17 Received message from Camera: op=State serial=137414 08:57:17 GetSingleValue result=40 Value=cccccccc 08:57:17 SkyScan query 08:57:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:57:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:17 Parameters OK 08:57:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:17 Set A/D data flow result=40 08:57:17 Set A/D channel type result=40 08:57:17 Set A/D encoding result=40 08:57:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:17 Set channel filter=0.000000e+000 result=40 08:57:17 Config A/D Result=40 08:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:17 Get A/D filter: -9.255963e+061 result=40 08:57:17 Get A/D value=-858993460 result=40 08:57:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:17 Parameters OK 08:57:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:17 Set A/D data flow result=40 08:57:17 Set A/D channel type result=40 08:57:17 Set A/D encoding result=40 08:57:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:17 Set channel filter=0.000000e+000 result=40 08:57:17 Config A/D Result=40 08:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:17 Get A/D filter: -9.255963e+061 result=40 08:57:17 Get A/D value=-858993460 result=40 08:57:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:17 Aux= 08:57:17 Message to Camera, serial 137414 queued 08:57:54 Received message from Master: op=PointingHead serial=137427 08:57:54 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:57:54 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:57:55 Point started: ret=0 08:57:55 point_skyscan result=0 08:57:55 Check angles 08:57:55 SkyScan query 08:57:56 SkyScan query done: ret=0 az=64.35<-4290 ze=66.57<-7562 Statuses=0009 0008 08:57:56 Msec=0 True Az=64.35 Ze=66.57 Az status=0009 Ze status=0008 08:57:56 Check angles 08:57:56 SkyScan query 08:57:57 SkyScan query done: ret=0 az=81.9<-5460 ze=66.51<-7566 Statuses=0009 0008 08:57:57 Msec=750 True Az=81.9 Ze=66.51 Az status=0009 Ze status=0008 08:57:57 Check angles 08:57:57 SkyScan query 08:57:57 SkyScan query done: ret=0 az=99.405<-6627 ze=66.51<-7566 Statuses=0009 0008 08:57:57 Msec=1500 True Az=99.405 Ze=66.51 Az status=0009 Ze status=0008 08:57:58 Check angles 08:57:58 SkyScan query 08:57:58 SkyScan query done: ret=0 az=117.15<-7810 ze=66.51<-7566 Statuses=0009 0008 08:57:58 Msec=2250 True Az=117.15 Ze=66.51 Az status=0009 Ze status=0008 08:57:58 Check angles 08:57:58 SkyScan query 08:57:59 SkyScan query done: ret=0 az=134.67<-8978 ze=66.51<-7566 Statuses=0009 0008 08:57:59 Msec=3000 True Az=134.67 Ze=66.51 Az status=0009 Ze status=0008 08:57:59 Check angles 08:57:59 SkyScan query 08:58:00 SkyScan query done: ret=0 az=152.07<-10138 ze=66.51<-7566 Statuses=0009 0008 08:58:00 Msec=3750 True Az=152.07 Ze=66.51 Az status=0009 Ze status=0008 08:58:00 Check angles 08:58:00 SkyScan query 08:58:00 SkyScan query done: ret=0 az=158.01<-10534 ze=66.51<-7566 Statuses=0008 0008 08:58:00 Msec=4500 True Az=158.01 Ze=66.51 Az status=0008 Ze status=0008 08:58:00 Message to Master queued w/err=0: serial=137427 error=0 08:58:05 Received message from Master: op=Filter serial=137428 08:58:05 Color wheel filter change from 0 to 0 08:58:05 FLIGetFilterPos err=0 currentPosition=0 08:58:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:05 Filter is already there-color wheel unchanged 08:58:06 Received message from Master: op=Shutter serial=137429 08:58:06 Shutter LASER close 08:58:06 Received message from Camera: op=State serial=137431 08:58:06 GetSingleValue result=40 Value=cccccccc 08:58:06 SkyScan query 08:58:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 08:58:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:06 Parameters OK 08:58:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:06 Set A/D data flow result=40 08:58:06 Set A/D channel type result=40 08:58:06 Set A/D encoding result=40 08:58:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:06 Set channel filter=0.000000e+000 result=40 08:58:06 Config A/D Result=40 08:58:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:06 Get A/D filter: -9.255963e+061 result=40 08:58:06 Get A/D value=-858993460 result=40 08:58:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:06 Parameters OK 08:58:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:06 Set A/D data flow result=40 08:58:06 Set A/D channel type result=40 08:58:06 Set A/D encoding result=40 08:58:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:06 Set channel filter=0.000000e+000 result=40 08:58:06 Config A/D Result=40 08:58:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:06 Get A/D filter: -9.255963e+061 result=40 08:58:06 Get A/D value=-858993460 result=40 08:58:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:06 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:06 Aux= 08:58:06 Message to Camera, serial 137431 queued 08:58:43 Received message from Master: op=PointingHead serial=137444 08:58:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:58:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:58:43 Point started: ret=0 08:58:43 point_skyscan result=0 08:58:44 Check angles 08:58:44 SkyScan query 08:58:45 SkyScan query done: ret=0 az=135.15<-9010 ze=36.9<-9540 Statuses=0009 0009 08:58:45 Msec=0 True Az=135.15 Ze=36.9 Az status=0009 Ze status=0009 08:58:45 Check angles 08:58:45 SkyScan query 08:58:45 SkyScan query done: ret=0 az=117.285<-7819 ze=15.6<-10960 Statuses=0009 0009 08:58:45 Msec=750 True Az=117.285 Ze=15.6 Az status=0009 Ze status=0009 08:58:46 Check angles 08:58:46 SkyScan query 08:58:46 SkyScan query done: ret=0 az=99.48<-6632 ze=-5.865<-12391 Statuses=0009 0009 08:58:46 Msec=1500 True Az=99.48 Ze=-5.865 Az status=0009 Ze status=0009 08:58:46 Check angles 08:58:46 SkyScan query 08:58:47 SkyScan query done: ret=0 az=82.095<-5473 ze=-26.85<-13790 Statuses=0009 0009 08:58:47 Msec=2250 True Az=82.095 Ze=-26.85 Az status=0009 Ze status=0009 08:58:47 Check angles 08:58:47 SkyScan query 08:58:48 SkyScan query done: ret=0 az=64.53<-4302 ze=-38.58<-14572 Statuses=0009 0008 08:58:48 Msec=3000 True Az=64.53 Ze=-38.58 Az status=0009 Ze status=0008 08:58:48 Check angles 08:58:48 SkyScan query 08:58:49 SkyScan query done: ret=0 az=46.65<-3110 ze=-38.52<-14568 Statuses=0009 0008 08:58:49 Msec=3750 True Az=46.65 Ze=-38.52 Az status=0009 Ze status=0008 08:58:49 Check angles 08:58:49 SkyScan query 08:58:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:58:49 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:58:49 Message to Master queued w/err=0: serial=137444 error=0 08:58:54 Received message from Master: op=Filter serial=137445 08:58:54 Color wheel filter change from 0 to 0 08:58:54 FLIGetFilterPos err=0 currentPosition=0 08:58:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:54 Filter is already there-color wheel unchanged 08:58:54 Received message from Master: op=Shutter serial=137446 08:58:54 Shutter LASER close 08:58:54 Received message from Camera: op=State serial=137448 08:58:54 GetSingleValue result=40 Value=cccccccc 08:58:54 SkyScan query 08:58:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:58:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:55 Parameters OK 08:58:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:55 Set A/D data flow result=40 08:58:55 Set A/D channel type result=40 08:58:55 Set A/D encoding result=40 08:58:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:55 Set channel filter=0.000000e+000 result=40 08:58:55 Config A/D Result=40 08:58:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:55 Get A/D filter: -9.255963e+061 result=40 08:58:55 Get A/D value=-858993460 result=40 08:58:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:55 Parameters OK 08:58:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:55 Set A/D data flow result=40 08:58:55 Set A/D channel type result=40 08:58:55 Set A/D encoding result=40 08:58:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:55 Set channel filter=0.000000e+000 result=40 08:58:55 Config A/D Result=40 08:58:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:55 Get A/D filter: -9.255963e+061 result=40 08:58:55 Get A/D value=-858993460 result=40 08:58:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:55 Aux= 08:58:55 Message to Camera, serial 137448 queued 08:59:31 Received message from Master: op=PointingHead serial=137460 08:59:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:59:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:59:31 Point started: ret=0 08:59:31 point_skyscan result=0 08:59:32 Check angles 08:59:32 SkyScan query 08:59:33 SkyScan query done: ret=0 az=64.155<-4277 ze=-68.595<-16573 Statuses=0009 0009 08:59:33 Msec=0 True Az=64.155 Ze=-68.595 Az status=0009 Ze status=0009 08:59:33 Check angles 08:59:33 SkyScan query 08:59:33 SkyScan query done: ret=0 az=82.05<-5470 ze=-89.895<-17993 Statuses=0009 0009 08:59:33 Msec=750 True Az=82.05 Ze=-89.895 Az status=0009 Ze status=0009 08:59:34 Check angles 08:59:34 SkyScan query 08:59:34 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.85<-19390 Statuses=0009 0009 08:59:34 Msec=1500 True Az=99.435 Ze=-110.85 Az status=0009 Ze status=0009 08:59:34 Check angles 08:59:34 SkyScan query 08:59:35 SkyScan query done: ret=0 az=116.94<-7796 ze=-131.745<-20783 Statuses=0009 0009 08:59:35 Msec=2250 True Az=116.94 Ze=-131.745 Az status=0009 Ze status=0009 08:59:35 Check angles 08:59:35 SkyScan query 08:59:36 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 08:59:36 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 08:59:36 Check angles 08:59:36 SkyScan query 08:59:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 08:59:36 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 08:59:36 Message to Master queued w/err=0: serial=137460 error=0 08:59:41 Received message from Master: op=Filter serial=137461 08:59:41 Color wheel filter change from 0 to 0 08:59:41 FLIGetFilterPos err=0 currentPosition=0 08:59:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:41 Filter is already there-color wheel unchanged 08:59:42 Received message from Master: op=Shutter serial=137462 08:59:42 Shutter LASER close 08:59:42 Received message from Camera: op=State serial=137464 08:59:42 GetSingleValue result=40 Value=cccccccc 08:59:42 SkyScan query 08:59:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:59:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:42 Parameters OK 08:59:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:42 Set A/D data flow result=40 08:59:42 Set A/D channel type result=40 08:59:42 Set A/D encoding result=40 08:59:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:42 Set channel filter=0.000000e+000 result=40 08:59:42 Config A/D Result=40 08:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:42 Get A/D filter: -9.255963e+061 result=40 08:59:42 Get A/D value=-858993460 result=40 08:59:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:42 Parameters OK 08:59:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:42 Set A/D data flow result=40 08:59:42 Set A/D channel type result=40 08:59:42 Set A/D encoding result=40 08:59:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:42 Set channel filter=0.000000e+000 result=40 08:59:42 Config A/D Result=40 08:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:42 Get A/D filter: -9.255963e+061 result=40 08:59:42 Get A/D value=-858993460 result=40 08:59:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:42 Aux= 08:59:42 Message to Camera, serial 137464 queued 09:00:19 Received message from Master: op=PointingHead serial=137477 09:00:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:00:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:00:19 Point started: ret=0 09:00:19 point_skyscan result=0 09:00:20 Check angles 09:00:20 SkyScan query 09:00:21 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 09:00:21 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 09:00:21 Check angles 09:00:21 SkyScan query 09:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:00:21 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:00:21 Message to Master queued w/err=0: serial=137477 error=0 09:00:26 Received message from Master: op=Filter serial=137478 09:00:26 Color wheel filter change from 0 to 0 09:00:26 FLIGetFilterPos err=0 currentPosition=0 09:00:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:26 Filter is already there-color wheel unchanged 09:00:27 Received message from Master: op=Shutter serial=137479 09:00:27 Shutter LASER open 09:00:27 Received message from Camera: op=State serial=137481 09:00:27 GetSingleValue result=40 Value=cccccccc 09:00:27 SkyScan query 09:00:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:00:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:27 Parameters OK 09:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:27 Set A/D data flow result=40 09:00:27 Set A/D channel type result=40 09:00:27 Set A/D encoding result=40 09:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:27 Set channel filter=0.000000e+000 result=40 09:00:27 Config A/D Result=40 09:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:27 Get A/D filter: -9.255963e+061 result=40 09:00:27 Get A/D value=-858993460 result=40 09:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:27 Parameters OK 09:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:27 Set A/D data flow result=40 09:00:27 Set A/D channel type result=40 09:00:27 Set A/D encoding result=40 09:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:27 Set channel filter=0.000000e+000 result=40 09:00:27 Config A/D Result=40 09:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:27 Get A/D filter: -9.255963e+061 result=40 09:00:27 Get A/D value=-858993460 result=40 09:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:27 Aux= 09:00:27 Message to Camera, serial 137481 queued 09:00:36 Received message from Master: op=Shutter serial=137491 09:00:36 Shutter LASER close 09:00:36 Received message from Master: op=PointingHead serial=137495 09:00:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:00:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:00:37 Point started: ret=0 09:00:37 point_skyscan result=0 09:00:38 Check angles 09:00:38 SkyScan query 09:00:38 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.115<-21541 Statuses=0009 0009 09:00:38 Msec=0 True Az=135.99 Ze=-143.115 Az status=0009 Ze status=0009 09:00:38 Check angles 09:00:38 SkyScan query 09:00:39 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.145<-20143 Statuses=0009 0009 09:00:39 Msec=750 True Az=153.525 Ze=-122.145 Az status=0009 Ze status=0009 09:00:39 Check angles 09:00:39 SkyScan query 09:00:40 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.71<-18714 Statuses=0009 0009 09:00:40 Msec=1500 True Az=171.435 Ze=-100.71 Az status=0009 Ze status=0009 09:00:40 Check angles 09:00:40 SkyScan query 09:00:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.845<-17323 Statuses=0008 0009 09:00:40 Msec=2250 True Az=176.01 Ze=-79.845 Az status=0008 Ze status=0009 09:00:41 Check angles 09:00:41 SkyScan query 09:00:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.83<-15922 Statuses=0008 0009 09:00:41 Msec=3000 True Az=176.01 Ze=-58.83 Az status=0008 Ze status=0009 09:00:41 Check angles 09:00:41 SkyScan query 09:00:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:00:42 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:00:42 Message to Master queued w/err=0: serial=137495 error=0 09:00:47 Received message from Master: op=Filter serial=137496 09:00:47 Color wheel filter change from 0 to 0 09:00:47 FLIGetFilterPos err=0 currentPosition=0 09:00:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:47 Filter is already there-color wheel unchanged 09:00:47 Received message from Master: op=Shutter serial=137497 09:00:47 Shutter LASER close 09:00:47 Received message from Camera: op=State serial=137499 09:00:47 GetSingleValue result=40 Value=cccccccc 09:00:47 SkyScan query 09:00:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:00:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:48 Parameters OK 09:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:48 Set A/D data flow result=40 09:00:48 Set A/D channel type result=40 09:00:48 Set A/D encoding result=40 09:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:48 Set channel filter=0.000000e+000 result=40 09:00:48 Config A/D Result=40 09:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:48 Get A/D filter: -9.255963e+061 result=40 09:00:48 Get A/D value=-858993460 result=40 09:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:48 Parameters OK 09:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:48 Set A/D data flow result=40 09:00:48 Set A/D channel type result=40 09:00:48 Set A/D encoding result=40 09:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:48 Set channel filter=0.000000e+000 result=40 09:00:48 Config A/D Result=40 09:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:48 Get A/D filter: -9.255963e+061 result=40 09:00:48 Get A/D value=-858993460 result=40 09:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:48 Aux= 09:00:48 Message to Camera, serial 137499 queued 09:01:25 Received message from Master: op=PointingHead serial=137512 09:01:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:01:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:01:25 Point started: ret=0 09:01:25 point_skyscan result=0 09:01:26 Check angles 09:01:26 SkyScan query 09:01:26 SkyScan query done: ret=0 az=152.64<-10176 ze=-21.255<-13417 Statuses=0009 0009 09:01:26 Msec=0 True Az=152.64 Ze=-21.255 Az status=0009 Ze status=0009 09:01:26 Check angles 09:01:26 SkyScan query 09:01:27 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.285<-12019 Statuses=0009 0009 09:01:27 Msec=750 True Az=135.09 Ze=-0.285 Az status=0009 Ze status=0009 09:01:27 Check angles 09:01:27 SkyScan query 09:01:28 SkyScan query done: ret=0 az=117.54<-7836 ze=20.67<-10622 Statuses=0009 0009 09:01:28 Msec=1500 True Az=117.54 Ze=20.67 Az status=0009 Ze status=0009 09:01:28 Check angles 09:01:28 SkyScan query 09:01:29 SkyScan query done: ret=0 az=100.275<-6685 ze=41.595<-9227 Statuses=0009 0009 09:01:29 Msec=2250 True Az=100.275 Ze=41.595 Az status=0009 Ze status=0009 09:01:29 Check angles 09:01:29 SkyScan query 09:01:29 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:01:29 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:01:29 Check angles 09:01:29 SkyScan query 09:01:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:01:30 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:01:30 Message to Master queued w/err=0: serial=137512 error=0 09:01:35 Received message from Master: op=Filter serial=137513 09:01:35 Color wheel filter change from 0 to 0 09:01:35 FLIGetFilterPos err=0 currentPosition=0 09:01:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:35 Filter is already there-color wheel unchanged 09:01:35 Received message from Master: op=Shutter serial=137514 09:01:35 Shutter LASER close 09:01:35 Received message from Camera: op=State serial=137516 09:01:35 GetSingleValue result=40 Value=cccccccc 09:01:35 SkyScan query 09:01:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:01:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:36 Parameters OK 09:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:36 Set A/D data flow result=40 09:01:36 Set A/D channel type result=40 09:01:36 Set A/D encoding result=40 09:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:36 Set channel filter=0.000000e+000 result=40 09:01:36 Config A/D Result=40 09:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:36 Get A/D filter: -9.255963e+061 result=40 09:01:36 Get A/D value=-858993460 result=40 09:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:36 Parameters OK 09:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:36 Set A/D data flow result=40 09:01:36 Set A/D channel type result=40 09:01:36 Set A/D encoding result=40 09:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:36 Set channel filter=0.000000e+000 result=40 09:01:36 Config A/D Result=40 09:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:36 Get A/D filter: -9.255963e+061 result=40 09:01:36 Get A/D value=-858993460 result=40 09:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:01:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:01:36 Aux= 09:01:36 Message to Camera, serial 137516 queued 09:02:13 Received message from Master: op=PointingHead serial=137529 09:02:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:02:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:02:13 Point started: ret=0 09:02:13 point_skyscan result=0 09:02:14 Check angles 09:02:14 SkyScan query 09:02:14 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 09:02:14 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 09:02:15 Check angles 09:02:15 SkyScan query 09:02:15 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 09:02:15 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 09:02:15 Check angles 09:02:15 SkyScan query 09:02:16 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 09:02:16 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 09:02:16 Check angles 09:02:16 SkyScan query 09:02:17 SkyScan query done: ret=0 az=161.775<-10785 ze=38.505<-9433 Statuses=0009 0008 09:02:17 Msec=2250 True Az=161.775 Ze=38.505 Az status=0009 Ze status=0008 09:02:17 Check angles 09:02:17 SkyScan query 09:02:17 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:02:17 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:02:18 Check angles 09:02:18 SkyScan query 09:02:18 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:02:18 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:02:18 Message to Master queued w/err=0: serial=137529 error=0 09:02:23 Received message from Master: op=Filter serial=137530 09:02:23 Color wheel filter change from 0 to 0 09:02:23 FLIGetFilterPos err=0 currentPosition=0 09:02:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:23 Filter is already there-color wheel unchanged 09:02:23 Received message from Master: op=Shutter serial=137531 09:02:23 Shutter LASER close 09:02:23 Received message from Camera: op=State serial=137533 09:02:23 GetSingleValue result=40 Value=cccccccc 09:02:23 SkyScan query 09:02:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:02:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:24 Parameters OK 09:02:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:24 Set A/D data flow result=40 09:02:24 Set A/D channel type result=40 09:02:24 Set A/D encoding result=40 09:02:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:24 Set channel filter=0.000000e+000 result=40 09:02:24 Config A/D Result=40 09:02:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:24 Get A/D filter: -9.255963e+061 result=40 09:02:24 Get A/D value=-858993460 result=40 09:02:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:24 Parameters OK 09:02:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:24 Set A/D data flow result=40 09:02:24 Set A/D channel type result=40 09:02:24 Set A/D encoding result=40 09:02:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:24 Set channel filter=0.000000e+000 result=40 09:02:24 Config A/D Result=40 09:02:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:24 Get A/D filter: -9.255963e+061 result=40 09:02:24 Get A/D value=-858993460 result=40 09:02:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:24 Aux= 09:02:24 Message to Camera, serial 137533 queued 09:03:01 Received message from Master: op=PointingHead serial=137546 09:03:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:03:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:03:01 Point started: ret=0 09:03:01 point_skyscan result=0 09:03:02 Check angles 09:03:02 SkyScan query 09:03:02 SkyScan query done: ret=0 az=153.165<-10211 ze=8.925<-11405 Statuses=0009 0009 09:03:02 Msec=0 True Az=153.165 Ze=8.925 Az status=0009 Ze status=0009 09:03:03 Check angles 09:03:03 SkyScan query 09:03:03 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.075<-12805 Statuses=0009 0009 09:03:03 Msec=750 True Az=135.705 Ze=-12.075 Az status=0009 Ze status=0009 09:03:03 Check angles 09:03:03 SkyScan query 09:03:04 SkyScan query done: ret=0 az=118.17<-7878 ze=-32.97<-14198 Statuses=0009 0009 09:03:04 Msec=1500 True Az=118.17 Ze=-32.97 Az status=0009 Ze status=0009 09:03:04 Check angles 09:03:04 SkyScan query 09:03:05 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.555<-15437 Statuses=0009 0009 09:03:05 Msec=2250 True Az=100.41 Ze=-51.555 Az status=0009 Ze status=0009 09:03:05 Check angles 09:03:05 SkyScan query 09:03:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 09:03:05 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 09:03:06 Check angles 09:03:06 SkyScan query 09:03:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:03:06 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:03:06 Message to Master queued w/err=0: serial=137546 error=0 09:03:11 Received message from Master: op=Filter serial=137547 09:03:11 Color wheel filter change from 0 to 0 09:03:11 FLIGetFilterPos err=0 currentPosition=0 09:03:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:11 Filter is already there-color wheel unchanged 09:03:11 Received message from Master: op=Shutter serial=137548 09:03:11 Shutter LASER close 09:03:11 Received message from Camera: op=State serial=137550 09:03:11 GetSingleValue result=40 Value=cccccccc 09:03:11 SkyScan query 09:03:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:03:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:12 Parameters OK 09:03:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:12 Set A/D data flow result=40 09:03:12 Set A/D channel type result=40 09:03:12 Set A/D encoding result=40 09:03:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:12 Set channel filter=0.000000e+000 result=40 09:03:12 Config A/D Result=40 09:03:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:12 Get A/D filter: -9.255963e+061 result=40 09:03:12 Get A/D value=-858993460 result=40 09:03:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:12 Parameters OK 09:03:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:12 Set A/D data flow result=40 09:03:12 Set A/D channel type result=40 09:03:12 Set A/D encoding result=40 09:03:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:12 Set channel filter=0.000000e+000 result=40 09:03:12 Config A/D Result=40 09:03:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:12 Get A/D filter: -9.255963e+061 result=40 09:03:12 Get A/D value=-858993460 result=40 09:03:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:12 Aux= 09:03:12 Message to Camera, serial 137550 queued 09:03:49 Received message from Master: op=PointingHead serial=137563 09:03:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:03:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:03:49 Point started: ret=0 09:03:49 point_skyscan result=0 09:03:50 Check angles 09:03:50 SkyScan query 09:03:51 SkyScan query done: ret=0 az=108.735<-7249 ze=-81.015<-17401 Statuses=0009 0009 09:03:51 Msec=0 True Az=108.735 Ze=-81.015 Az status=0009 Ze status=0009 09:03:51 Check angles 09:03:51 SkyScan query 09:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 09:03:51 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 09:03:51 Check angles 09:03:51 SkyScan query 09:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.94<-20196 Statuses=0008 0009 09:03:52 Msec=1500 True Az=112.995 Ze=-122.94 Az status=0008 Ze status=0009 09:03:52 Check angles 09:03:52 SkyScan query 09:03:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.895<-21593 Statuses=0008 0009 09:03:53 Msec=2250 True Az=112.995 Ze=-143.895 Az status=0008 Ze status=0009 09:03:53 Check angles 09:03:53 SkyScan query 09:03:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.835<-22989 Statuses=0008 0009 09:03:54 Msec=3000 True Az=112.995 Ze=-164.835 Az status=0008 Ze status=0009 09:03:54 Check angles 09:03:54 SkyScan query 09:03:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 09:03:54 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 09:03:54 Message to Master queued w/err=0: serial=137563 error=0 09:03:59 Received message from Master: op=Filter serial=137564 09:03:59 Color wheel filter change from 0 to 0 09:03:59 FLIGetFilterPos err=0 currentPosition=0 09:03:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:59 Filter is already there-color wheel unchanged 09:04:00 Received message from Master: op=Shutter serial=137565 09:04:00 Shutter LASER open 09:04:00 Received message from Camera: op=State serial=137567 09:04:00 GetSingleValue result=40 Value=cccccccc 09:04:00 SkyScan query 09:04:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:04:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:00 Parameters OK 09:04:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:00 Set A/D data flow result=40 09:04:00 Set A/D channel type result=40 09:04:00 Set A/D encoding result=40 09:04:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:00 Set channel filter=0.000000e+000 result=40 09:04:00 Config A/D Result=40 09:04:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:00 Get A/D filter: -9.255963e+061 result=40 09:04:00 Get A/D value=-858993460 result=40 09:04:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:00 Parameters OK 09:04:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:00 Set A/D data flow result=40 09:04:00 Set A/D channel type result=40 09:04:00 Set A/D encoding result=40 09:04:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:00 Set channel filter=0.000000e+000 result=40 09:04:00 Config A/D Result=40 09:04:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:00 Get A/D filter: -9.255963e+061 result=40 09:04:00 Get A/D value=-858993460 result=40 09:04:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:00 Aux= 09:04:00 Message to Camera, serial 137567 queued 09:04:09 Received message from Master: op=Shutter serial=137577 09:04:09 Shutter LASER close 09:04:09 Received message from Master: op=PointingHead serial=137581 09:04:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:04:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:04:09 Point started: ret=0 09:04:09 point_skyscan result=0 09:04:10 Check angles 09:04:10 SkyScan query 09:04:11 SkyScan query done: ret=0 az=89.985<-5999 ze=157.335<-1511 Statuses=0009 0009 09:04:11 Msec=0 True Az=89.985 Ze=157.335 Az status=0009 Ze status=0009 09:04:11 Check angles 09:04:11 SkyScan query 09:04:12 SkyScan query done: ret=0 az=72.555<-4837 ze=136.38<-2908 Statuses=0009 0009 09:04:12 Msec=750 True Az=72.555 Ze=136.38 Az status=0009 Ze status=0009 09:04:12 Check angles 09:04:12 SkyScan query 09:04:12 SkyScan query done: ret=0 az=55.05<-3670 ze=115.455<-4303 Statuses=0009 0009 09:04:12 Msec=1500 True Az=55.05 Ze=115.455 Az status=0009 Ze status=0009 09:04:13 Check angles 09:04:13 SkyScan query 09:04:13 SkyScan query done: ret=0 az=40.98<-2732 ze=94.065<-5729 Statuses=0009 0009 09:04:13 Msec=2250 True Az=40.98 Ze=94.065 Az status=0009 Ze status=0009 09:04:13 Check angles 09:04:13 SkyScan query 09:04:14 SkyScan query done: ret=0 az=40.995<-2733 ze=73.08<-7128 Statuses=0008 0009 09:04:14 Msec=3000 True Az=40.995 Ze=73.08 Az status=0008 Ze status=0009 09:04:14 Check angles 09:04:14 SkyScan query 09:04:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.635<-8491 Statuses=0008 0009 09:04:15 Msec=3750 True Az=40.995 Ze=52.635 Az status=0008 Ze status=0009 09:04:15 Check angles 09:04:15 SkyScan query 09:04:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:04:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:04:15 Message to Master queued w/err=0: serial=137581 error=0 09:04:20 Received message from Master: op=Filter serial=137582 09:04:20 Color wheel filter change from 0 to 0 09:04:20 FLIGetFilterPos err=0 currentPosition=0 09:04:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:20 Filter is already there-color wheel unchanged 09:04:21 Received message from Master: op=Shutter serial=137583 09:04:21 Shutter LASER close 09:04:21 Received message from Camera: op=State serial=137585 09:04:21 GetSingleValue result=40 Value=cccccccc 09:04:21 SkyScan query 09:04:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:04:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:22 Parameters OK 09:04:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:22 Set A/D data flow result=40 09:04:22 Set A/D channel type result=40 09:04:22 Set A/D encoding result=40 09:04:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:22 Set channel filter=0.000000e+000 result=40 09:04:22 Config A/D Result=40 09:04:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:22 Get A/D filter: -9.255963e+061 result=40 09:04:22 Get A/D value=-858993460 result=40 09:04:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:22 Parameters OK 09:04:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:22 Set A/D data flow result=40 09:04:22 Set A/D channel type result=40 09:04:22 Set A/D encoding result=40 09:04:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:22 Set channel filter=0.000000e+000 result=40 09:04:22 Config A/D Result=40 09:04:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:22 Get A/D filter: -9.255963e+061 result=40 09:04:22 Get A/D value=-858993460 result=40 09:04:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:22 Aux= 09:04:22 Message to Camera, serial 137585 queued 09:04:57 Received message from Master: op=PointingHead serial=137597 09:04:57 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:04:57 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:04:58 Point started: ret=0 09:04:58 point_skyscan result=0 09:04:58 Check angles 09:04:58 SkyScan query 09:04:59 SkyScan query done: ret=0 az=63.93<-4262 ze=66.54<-7564 Statuses=0009 0008 09:04:59 Msec=0 True Az=63.93 Ze=66.54 Az status=0009 Ze status=0008 09:04:59 Check angles 09:04:59 SkyScan query 09:05:00 SkyScan query done: ret=0 az=81.555<-5437 ze=66.51<-7566 Statuses=0009 0008 09:05:00 Msec=750 True Az=81.555 Ze=66.51 Az status=0009 Ze status=0008 09:05:00 Check angles 09:05:00 SkyScan query 09:05:01 SkyScan query done: ret=0 az=98.91<-6594 ze=66.495<-7567 Statuses=0009 0008 09:05:01 Msec=1500 True Az=98.91 Ze=66.495 Az status=0009 Ze status=0008 09:05:01 Check angles 09:05:01 SkyScan query 09:05:01 SkyScan query done: ret=0 az=116.415<-7761 ze=66.495<-7567 Statuses=0009 0008 09:05:01 Msec=2250 True Az=116.415 Ze=66.495 Az status=0009 Ze status=0008 09:05:01 Check angles 09:05:01 SkyScan query 09:05:02 SkyScan query done: ret=0 az=133.875<-8925 ze=66.495<-7567 Statuses=0009 0008 09:05:02 Msec=3000 True Az=133.875 Ze=66.495 Az status=0009 Ze status=0008 09:05:02 Check angles 09:05:02 SkyScan query 09:05:03 SkyScan query done: ret=0 az=151.35<-10090 ze=66.495<-7567 Statuses=0009 0008 09:05:03 Msec=3750 True Az=151.35 Ze=66.495 Az status=0009 Ze status=0008 09:05:03 Check angles 09:05:03 SkyScan query 09:05:04 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:05:04 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:05:04 Message to Master queued w/err=0: serial=137597 error=0 09:05:09 Received message from Master: op=Filter serial=137598 09:05:09 Color wheel filter change from 0 to 0 09:05:09 FLIGetFilterPos err=0 currentPosition=0 09:05:09 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:09 Filter is already there-color wheel unchanged 09:05:09 Received message from Master: op=Shutter serial=137599 09:05:09 Shutter LASER close 09:05:09 Received message from Camera: op=State serial=137601 09:05:09 GetSingleValue result=40 Value=cccccccc 09:05:09 SkyScan query 09:05:09 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:05:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:09 Parameters OK 09:05:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:09 Set A/D data flow result=40 09:05:09 Set A/D channel type result=40 09:05:09 Set A/D encoding result=40 09:05:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:09 Set channel filter=0.000000e+000 result=40 09:05:09 Config A/D Result=40 09:05:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:09 Get A/D filter: -9.255963e+061 result=40 09:05:09 Get A/D value=-858993460 result=40 09:05:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:09 Parameters OK 09:05:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:09 Set A/D data flow result=40 09:05:09 Set A/D channel type result=40 09:05:09 Set A/D encoding result=40 09:05:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:09 Set channel filter=0.000000e+000 result=40 09:05:09 Config A/D Result=40 09:05:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:09 Get A/D filter: -9.255963e+061 result=40 09:05:09 Get A/D value=-858993460 result=40 [UTC 2018-12-14 09:05:09] 09:05:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:09 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:09 Aux= 09:05:09 Message to Camera, serial 137601 queued 09:05:46 Received message from Master: op=PointingHead serial=137614 09:05:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:05:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:05:46 Point started: ret=0 09:05:46 point_skyscan result=0 09:05:47 Check angles 09:05:47 SkyScan query 09:05:48 SkyScan query done: ret=0 az=134.79<-8986 ze=36.615<-9559 Statuses=0009 0009 09:05:48 Msec=0 True Az=134.79 Ze=36.615 Az status=0009 Ze status=0009 09:05:48 Check angles 09:05:48 SkyScan query 09:05:49 SkyScan query done: ret=0 az=117.285<-7819 ze=15.69<-10954 Statuses=0009 0009 09:05:49 Msec=750 True Az=117.285 Ze=15.69 Az status=0009 Ze status=0009 09:05:49 Check angles 09:05:49 SkyScan query 09:05:49 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.325<-12355 Statuses=0009 0009 09:05:49 Msec=1500 True Az=99.915 Ze=-5.325 Az status=0009 Ze status=0009 09:05:49 Check angles 09:05:49 SkyScan query 09:05:50 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.715<-13781 Statuses=0009 0009 09:05:50 Msec=2250 True Az=82.155 Ze=-26.715 Az status=0009 Ze status=0009 09:05:50 Check angles 09:05:50 SkyScan query 09:05:51 SkyScan query done: ret=0 az=64.65<-4310 ze=-38.58<-14572 Statuses=0009 0008 09:05:51 Msec=3000 True Az=64.65 Ze=-38.58 Az status=0009 Ze status=0008 09:05:51 Check angles 09:05:51 SkyScan query 09:05:52 SkyScan query done: ret=0 az=47.205<-3147 ze=-38.52<-14568 Statuses=0009 0008 09:05:52 Msec=3750 True Az=47.205 Ze=-38.52 Az status=0009 Ze status=0008 09:05:52 Check angles 09:05:52 SkyScan query 09:05:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:05:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:05:52 Message to Master queued w/err=0: serial=137614 error=0 09:05:57 Received message from Master: op=Filter serial=137615 09:05:57 Color wheel filter change from 0 to 0 09:05:57 FLIGetFilterPos err=0 currentPosition=0 09:05:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:57 Filter is already there-color wheel unchanged 09:05:58 Received message from Master: op=Shutter serial=137616 09:05:58 Shutter LASER close 09:05:58 Received message from Camera: op=State serial=137618 09:05:58 GetSingleValue result=40 Value=cccccccc 09:05:58 SkyScan query 09:05:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:05:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:58 Parameters OK 09:05:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:58 Set A/D data flow result=40 09:05:58 Set A/D channel type result=40 09:05:58 Set A/D encoding result=40 09:05:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:58 Set channel filter=0.000000e+000 result=40 09:05:58 Config A/D Result=40 09:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:58 Get A/D filter: -9.255963e+061 result=40 09:05:58 Get A/D value=-858993460 result=40 09:05:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:58 Parameters OK 09:05:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:58 Set A/D data flow result=40 09:05:58 Set A/D channel type result=40 09:05:58 Set A/D encoding result=40 09:05:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:58 Set channel filter=0.000000e+000 result=40 09:05:58 Config A/D Result=40 09:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:58 Get A/D filter: -9.255963e+061 result=40 09:05:58 Get A/D value=-858993460 result=40 09:05:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:58 Aux= 09:05:58 Message to Camera, serial 137618 queued 09:06:35 Received message from Master: op=PointingHead serial=137631 09:06:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:06:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:06:35 Point started: ret=0 09:06:35 point_skyscan result=0 09:06:36 Check angles 09:06:36 SkyScan query 09:06:37 SkyScan query done: ret=0 az=64.155<-4277 ze=-68.49<-16566 Statuses=0009 0009 09:06:37 Msec=0 True Az=64.155 Ze=-68.49 Az status=0009 Ze status=0009 09:06:37 Check angles 09:06:37 SkyScan query 09:06:37 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.46<-17964 Statuses=0009 0009 09:06:37 Msec=750 True Az=81.645 Ze=-89.46 Az status=0009 Ze status=0009 09:06:38 Check angles 09:06:38 SkyScan query 09:06:38 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.415<-19361 Statuses=0009 0009 09:06:38 Msec=1500 True Az=99.06 Ze=-110.415 Az status=0009 Ze status=0009 09:06:38 Check angles 09:06:38 SkyScan query 09:06:39 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.34<-20756 Statuses=0009 0009 09:06:39 Msec=2250 True Az=116.625 Ze=-131.34 Az status=0009 Ze status=0009 09:06:39 Check angles 09:06:39 SkyScan query 09:06:40 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 09:06:40 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 09:06:40 Check angles 09:06:40 SkyScan query 09:06:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 09:06:40 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 09:06:40 Message to Master queued w/err=0: serial=137631 error=0 09:06:45 Received message from Master: op=Filter serial=137632 09:06:45 Color wheel filter change from 0 to 0 09:06:45 FLIGetFilterPos err=0 currentPosition=0 09:06:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:45 Filter is already there-color wheel unchanged 09:06:46 Received message from Master: op=Shutter serial=137633 09:06:46 Shutter LASER close 09:06:46 Received message from Camera: op=State serial=137635 09:06:46 GetSingleValue result=40 Value=cccccccc 09:06:46 SkyScan query 09:06:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:06:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:46 Parameters OK 09:06:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:46 Set A/D data flow result=40 09:06:46 Set A/D channel type result=40 09:06:46 Set A/D encoding result=40 09:06:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:46 Set channel filter=0.000000e+000 result=40 09:06:46 Config A/D Result=40 09:06:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:46 Get A/D filter: -9.255963e+061 result=40 09:06:46 Get A/D value=-858993460 result=40 09:06:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:46 Parameters OK 09:06:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:46 Set A/D data flow result=40 09:06:46 Set A/D channel type result=40 09:06:46 Set A/D encoding result=40 09:06:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:46 Set channel filter=0.000000e+000 result=40 09:06:46 Config A/D Result=40 09:06:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:46 Get A/D filter: -9.255963e+061 result=40 09:06:46 Get A/D value=-858993460 result=40 09:06:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:46 Aux= 09:06:46 Message to Camera, serial 137635 queued 09:07:23 Received message from Master: op=PointingHead serial=137648 09:07:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:07:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:07:23 Point started: ret=0 09:07:23 point_skyscan result=0 09:07:24 Check angles 09:07:24 SkyScan query 09:07:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.42<-23428 Statuses=0009 0009 09:07:25 Msec=0 True Az=112.995 Ze=-171.42 Az status=0009 Ze status=0009 09:07:25 Check angles 09:07:25 SkyScan query 09:07:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:07:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:07:25 Message to Master queued w/err=0: serial=137648 error=0 09:07:30 Received message from Master: op=Filter serial=137649 09:07:30 Color wheel filter change from 0 to 0 09:07:30 FLIGetFilterPos err=0 currentPosition=0 09:07:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:30 Filter is already there-color wheel unchanged 09:07:31 Received message from Master: op=Shutter serial=137650 09:07:31 Shutter LASER open 09:07:31 Received message from Camera: op=State serial=137652 09:07:31 GetSingleValue result=40 Value=cccccccc 09:07:31 SkyScan query 09:07:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:07:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:31 Parameters OK 09:07:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:31 Set A/D data flow result=40 09:07:31 Set A/D channel type result=40 09:07:31 Set A/D encoding result=40 09:07:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:31 Set channel filter=0.000000e+000 result=40 09:07:31 Config A/D Result=40 09:07:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:31 Get A/D filter: -9.255963e+061 result=40 09:07:31 Get A/D value=-858993460 result=40 09:07:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:31 Parameters OK 09:07:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:31 Set A/D data flow result=40 09:07:31 Set A/D channel type result=40 09:07:31 Set A/D encoding result=40 09:07:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:31 Set channel filter=0.000000e+000 result=40 09:07:31 Config A/D Result=40 09:07:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:31 Get A/D filter: -9.255963e+061 result=40 09:07:31 Get A/D value=-858993460 result=40 09:07:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:31 Aux= 09:07:31 Message to Camera, serial 137652 queued 09:07:40 Received message from Master: op=Shutter serial=137662 09:07:40 Shutter LASER close 09:07:40 Received message from Master: op=PointingHead serial=137666 09:07:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:07:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:07:41 Point started: ret=0 09:07:41 point_skyscan result=0 09:07:41 Check angles 09:07:41 SkyScan query 09:07:42 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.55<-21570 Statuses=0009 0009 09:07:42 Msec=0 True Az=135.735 Ze=-143.55 Az status=0009 Ze status=0009 09:07:42 Check angles 09:07:42 SkyScan query 09:07:43 SkyScan query done: ret=0 az=153.21<-10214 ze=-122.55<-20170 Statuses=0009 0009 09:07:43 Msec=750 True Az=153.21 Ze=-122.55 Az status=0009 Ze status=0009 09:07:43 Check angles 09:07:43 SkyScan query 09:07:44 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.7<-18780 Statuses=0009 0009 09:07:44 Msec=1500 True Az=170.775 Ze=-101.7 Az status=0009 Ze status=0009 09:07:44 Check angles 09:07:44 SkyScan query 09:07:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.625<-17375 Statuses=0008 0009 09:07:44 Msec=2250 True Az=176.01 Ze=-80.625 Az status=0008 Ze status=0009 09:07:44 Check angles 09:07:44 SkyScan query 09:07:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.715<-15981 Statuses=0008 0009 09:07:45 Msec=3000 True Az=176.01 Ze=-59.715 Az status=0008 Ze status=0009 09:07:45 Check angles 09:07:45 SkyScan query 09:07:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:07:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:07:46 Message to Master queued w/err=0: serial=137666 error=0 09:07:51 Received message from Master: op=Filter serial=137667 09:07:51 Color wheel filter change from 0 to 0 09:07:51 FLIGetFilterPos err=0 currentPosition=0 09:07:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:51 Filter is already there-color wheel unchanged 09:07:51 Received message from Master: op=Shutter serial=137668 09:07:51 Shutter LASER close 09:07:51 Received message from Camera: op=State serial=137670 09:07:51 GetSingleValue result=40 Value=cccccccc 09:07:51 SkyScan query 09:07:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:07:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:52 Parameters OK 09:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:52 Set A/D data flow result=40 09:07:52 Set A/D channel type result=40 09:07:52 Set A/D encoding result=40 09:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:52 Set channel filter=0.000000e+000 result=40 09:07:52 Config A/D Result=40 09:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:52 Get A/D filter: -9.255963e+061 result=40 09:07:52 Get A/D value=-858993460 result=40 09:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:52 Parameters OK 09:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:52 Set A/D data flow result=40 09:07:52 Set A/D channel type result=40 09:07:52 Set A/D encoding result=40 09:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:52 Set channel filter=0.000000e+000 result=40 09:07:52 Config A/D Result=40 09:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:52 Get A/D filter: -9.255963e+061 result=40 09:07:52 Get A/D value=-858993460 result=40 09:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:52 Aux= 09:07:52 Message to Camera, serial 137670 queued 09:08:29 Received message from Master: op=PointingHead serial=137683 09:08:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:08:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:08:29 Point started: ret=0 09:08:29 point_skyscan result=0 09:08:30 Check angles 09:08:30 SkyScan query 09:08:30 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.825<-13455 Statuses=0009 0009 09:08:30 Msec=0 True Az=152.985 Ze=-21.825 Az status=0009 Ze status=0009 09:08:30 Check angles 09:08:30 SkyScan query 09:08:31 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.795<-12053 Statuses=0009 0009 09:08:31 Msec=750 True Az=135.615 Ze=-0.795 Az status=0009 Ze status=0009 09:08:31 Check angles 09:08:31 SkyScan query 09:08:32 SkyScan query done: ret=0 az=118.065<-7871 ze=20.115<-10659 Statuses=0009 0009 09:08:32 Msec=1500 True Az=118.065 Ze=20.115 Az status=0009 Ze status=0009 09:08:32 Check angles 09:08:32 SkyScan query 09:08:33 SkyScan query done: ret=0 az=100.62<-6708 ze=41.115<-9259 Statuses=0009 0009 09:08:33 Msec=2250 True Az=100.62 Ze=41.115 Az status=0009 Ze status=0009 09:08:33 Check angles 09:08:33 SkyScan query 09:08:33 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 09:08:33 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 09:08:33 Check angles 09:08:33 SkyScan query 09:08:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 09:08:34 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 09:08:34 Message to Master queued w/err=0: serial=137683 error=0 09:08:39 Received message from Master: op=Filter serial=137684 09:08:39 Color wheel filter change from 0 to 0 09:08:39 FLIGetFilterPos err=0 currentPosition=0 09:08:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:39 Filter is already there-color wheel unchanged 09:08:39 Received message from Master: op=Shutter serial=137685 09:08:39 Shutter LASER close 09:08:39 Received message from Camera: op=State serial=137687 09:08:39 GetSingleValue result=40 Value=cccccccc 09:08:39 SkyScan query 09:08:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:08:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:40 Parameters OK 09:08:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:40 Set A/D data flow result=40 09:08:40 Set A/D channel type result=40 09:08:40 Set A/D encoding result=40 09:08:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:40 Set channel filter=0.000000e+000 result=40 09:08:40 Config A/D Result=40 09:08:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:40 Get A/D filter: -9.255963e+061 result=40 09:08:40 Get A/D value=-858993460 result=40 09:08:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:40 Parameters OK 09:08:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:40 Set A/D data flow result=40 09:08:40 Set A/D channel type result=40 09:08:40 Set A/D encoding result=40 09:08:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:40 Set channel filter=0.000000e+000 result=40 09:08:40 Config A/D Result=40 09:08:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:40 Get A/D filter: -9.255963e+061 result=40 09:08:40 Get A/D value=-858993460 result=40 09:08:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:40 Aux= 09:08:40 Message to Camera, serial 137687 queued 09:09:17 Received message from Master: op=PointingHead serial=137700 09:09:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:09:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:09:17 Point started: ret=0 09:09:17 point_skyscan result=0 09:09:18 Check angles 09:09:18 SkyScan query 09:09:18 SkyScan query done: ret=0 az=109.35<-7290 ze=38.49<-9434 Statuses=0009 0008 09:09:18 Msec=0 True Az=109.35 Ze=38.49 Az status=0009 Ze status=0008 09:09:19 Check angles 09:09:19 SkyScan query 09:09:19 SkyScan query done: ret=0 az=126.855<-8457 ze=38.505<-9433 Statuses=0009 0008 09:09:19 Msec=750 True Az=126.855 Ze=38.505 Az status=0009 Ze status=0008 09:09:19 Check angles 09:09:19 SkyScan query 09:09:20 SkyScan query done: ret=0 az=144.33<-9622 ze=38.505<-9433 Statuses=0009 0008 09:09:20 Msec=1500 True Az=144.33 Ze=38.505 Az status=0009 Ze status=0008 09:09:20 Check angles 09:09:20 SkyScan query 09:09:21 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 09:09:21 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 09:09:21 Check angles 09:09:21 SkyScan query 09:09:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:09:21 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:09:22 Check angles 09:09:22 SkyScan query 09:09:22 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:09:22 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:09:22 Message to Master queued w/err=0: serial=137700 error=0 09:09:27 Received message from Master: op=Filter serial=137701 09:09:27 Color wheel filter change from 0 to 0 09:09:27 FLIGetFilterPos err=0 currentPosition=0 09:09:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:27 Filter is already there-color wheel unchanged 09:09:27 Received message from Master: op=Shutter serial=137702 09:09:27 Shutter LASER close 09:09:27 Received message from Camera: op=State serial=137704 09:09:27 GetSingleValue result=40 Value=cccccccc 09:09:27 SkyScan query 09:09:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:09:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:28 Parameters OK 09:09:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:28 Set A/D data flow result=40 09:09:28 Set A/D channel type result=40 09:09:28 Set A/D encoding result=40 09:09:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:28 Set channel filter=0.000000e+000 result=40 09:09:28 Config A/D Result=40 09:09:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:28 Get A/D filter: -9.255963e+061 result=40 09:09:28 Get A/D value=-858993460 result=40 09:09:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:28 Parameters OK 09:09:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:28 Set A/D data flow result=40 09:09:28 Set A/D channel type result=40 09:09:28 Set A/D encoding result=40 09:09:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:28 Set channel filter=0.000000e+000 result=40 09:09:28 Config A/D Result=40 09:09:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:28 Get A/D filter: -9.255963e+061 result=40 09:09:28 Get A/D value=-858993460 result=40 09:09:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:28 Aux= 09:09:28 Message to Camera, serial 137704 queued 09:10:05 Received message from Master: op=PointingHead serial=137717 09:10:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:10:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:10:05 Point started: ret=0 09:10:05 point_skyscan result=0 09:10:06 Check angles 09:10:06 SkyScan query 09:10:06 SkyScan query done: ret=0 az=153.15<-10210 ze=8.82<-11412 Statuses=0009 0009 09:10:06 Msec=0 True Az=153.15 Ze=8.82 Az status=0009 Ze status=0009 09:10:07 Check angles 09:10:07 SkyScan query 09:10:07 SkyScan query done: ret=0 az=135.255<-9017 ze=-12.555<-12837 Statuses=0009 0009 09:10:07 Msec=750 True Az=135.255 Ze=-12.555 Az status=0009 Ze status=0009 09:10:07 Check angles 09:10:07 SkyScan query 09:10:08 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.555<-14237 Statuses=0009 0009 09:10:08 Msec=1500 True Az=117.765 Ze=-33.555 Az status=0009 Ze status=0009 09:10:08 Check angles 09:10:08 SkyScan query 09:10:09 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.555<-15437 Statuses=0009 0009 09:10:09 Msec=2250 True Az=100.38 Ze=-51.555 Az status=0009 Ze status=0009 09:10:09 Check angles 09:10:09 SkyScan query 09:10:09 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:10:09 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:10:10 Check angles 09:10:10 SkyScan query 09:10:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:10:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:10:10 Message to Master queued w/err=0: serial=137717 error=0 09:10:15 Received message from Master: op=Filter serial=137718 09:10:15 Color wheel filter change from 0 to 0 09:10:15 FLIGetFilterPos err=0 currentPosition=0 09:10:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:15 Filter is already there-color wheel unchanged 09:10:15 Received message from Master: op=Shutter serial=137719 09:10:15 Shutter LASER close 09:10:15 Received message from Camera: op=State serial=137721 09:10:15 GetSingleValue result=40 Value=cccccccc 09:10:15 SkyScan query 09:10:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:10:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:16 Parameters OK 09:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:16 Set A/D data flow result=40 09:10:16 Set A/D channel type result=40 09:10:16 Set A/D encoding result=40 09:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:16 Set channel filter=0.000000e+000 result=40 09:10:16 Config A/D Result=40 09:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:16 Get A/D filter: -9.255963e+061 result=40 09:10:16 Get A/D value=-858993460 result=40 09:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:16 Parameters OK 09:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:16 Set A/D data flow result=40 09:10:16 Set A/D channel type result=40 09:10:16 Set A/D encoding result=40 09:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:16 Set channel filter=0.000000e+000 result=40 09:10:16 Config A/D Result=40 09:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:16 Get A/D filter: -9.255963e+061 result=40 09:10:16 Get A/D value=-858993460 result=40 09:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:16 Aux= 09:10:16 Message to Camera, serial 137721 queued 09:10:53 Received message from Master: op=PointingHead serial=137734 09:10:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:10:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:10:53 Point started: ret=0 09:10:53 point_skyscan result=0 09:10:54 Check angles 09:10:54 SkyScan query 09:10:54 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.045<-17403 Statuses=0009 0009 09:10:54 Msec=0 True Az=108.87 Ze=-81.045 Az status=0009 Ze status=0009 09:10:55 Check angles 09:10:55 SkyScan query 09:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 09:10:55 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 09:10:55 Check angles 09:10:55 SkyScan query 09:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 09:10:56 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 09:10:56 Check angles 09:10:56 SkyScan query 09:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 09:10:57 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 09:10:57 Check angles 09:10:57 SkyScan query 09:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 09:10:57 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 09:10:58 Check angles 09:10:58 SkyScan query 09:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 09:10:58 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 09:10:58 Message to Master queued w/err=0: serial=137734 error=0 09:11:03 Received message from Master: op=Filter serial=137735 09:11:03 Color wheel filter change from 0 to 0 09:11:03 FLIGetFilterPos err=0 currentPosition=0 09:11:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:03 Filter is already there-color wheel unchanged 09:11:03 Received message from Master: op=Shutter serial=137736 09:11:03 Shutter LASER open 09:11:04 Received message from Camera: op=State serial=137738 09:11:04 GetSingleValue result=40 Value=cccccccc 09:11:04 SkyScan query 09:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:11:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:04 Parameters OK 09:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:04 Set A/D data flow result=40 09:11:04 Set A/D channel type result=40 09:11:04 Set A/D encoding result=40 09:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:04 Set channel filter=0.000000e+000 result=40 09:11:04 Config A/D Result=40 09:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:04 Get A/D filter: -9.255963e+061 result=40 09:11:04 Get A/D value=-858993460 result=40 09:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:04 Parameters OK 09:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:04 Set A/D data flow result=40 09:11:04 Set A/D channel type result=40 09:11:04 Set A/D encoding result=40 09:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:04 Set channel filter=0.000000e+000 result=40 09:11:04 Config A/D Result=40 09:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:04 Get A/D filter: -9.255963e+061 result=40 09:11:04 Get A/D value=-858993460 result=40 09:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:04 Aux= 09:11:04 Message to Camera, serial 137738 queued 09:11:13 Received message from Master: op=Shutter serial=137748 09:11:13 Shutter LASER close 09:11:13 Received message from Master: op=PointingHead serial=137752 09:11:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:11:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:11:13 Point started: ret=0 09:11:13 point_skyscan result=0 09:11:14 Check angles 09:11:14 SkyScan query 09:11:15 SkyScan query done: ret=0 az=89.82<-5988 ze=157.2<-1520 Statuses=0009 0009 09:11:15 Msec=0 True Az=89.82 Ze=157.2 Az status=0009 Ze status=0009 09:11:15 Check angles 09:11:15 SkyScan query 09:11:16 SkyScan query done: ret=0 az=72.42<-4828 ze=136.26<-2916 Statuses=0009 0009 09:11:16 Msec=750 True Az=72.42 Ze=136.26 Az status=0009 Ze status=0009 09:11:16 Check angles 09:11:16 SkyScan query 09:11:16 SkyScan query done: ret=0 az=54.975<-3665 ze=115.335<-4311 Statuses=0009 0009 09:11:16 Msec=1500 True Az=54.975 Ze=115.335 Az status=0009 Ze status=0009 09:11:16 Check angles 09:11:16 SkyScan query 09:11:17 SkyScan query done: ret=0 az=40.98<-2732 ze=94.335<-5711 Statuses=0009 0009 09:11:17 Msec=2250 True Az=40.98 Ze=94.335 Az status=0009 Ze status=0009 09:11:17 Check angles 09:11:17 SkyScan query 09:11:18 SkyScan query done: ret=0 az=40.995<-2733 ze=73.395<-7107 Statuses=0008 0009 09:11:18 Msec=3000 True Az=40.995 Ze=73.395 Az status=0008 Ze status=0009 09:11:18 Check angles 09:11:18 SkyScan query 09:11:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.83<-8478 Statuses=0008 0009 09:11:19 Msec=3750 True Az=40.995 Ze=52.83 Az status=0008 Ze status=0009 09:11:19 Check angles 09:11:19 SkyScan query 09:11:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:11:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:11:19 Message to Master queued w/err=0: serial=137752 error=0 09:11:24 Received message from Master: op=Filter serial=137753 09:11:24 Color wheel filter change from 0 to 0 09:11:24 FLIGetFilterPos err=0 currentPosition=0 09:11:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:24 Filter is already there-color wheel unchanged 09:11:24 Received message from Master: op=Shutter serial=137754 09:11:24 Shutter LASER close 09:11:25 Received message from Camera: op=State serial=137756 09:11:25 GetSingleValue result=40 Value=cccccccc 09:11:25 SkyScan query 09:11:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:11:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:25 Parameters OK 09:11:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:25 Set A/D data flow result=40 09:11:25 Set A/D channel type result=40 09:11:25 Set A/D encoding result=40 09:11:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:25 Set channel filter=0.000000e+000 result=40 09:11:25 Config A/D Result=40 09:11:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:25 Get A/D filter: -9.255963e+061 result=40 09:11:25 Get A/D value=-858993460 result=40 09:11:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:25 Parameters OK 09:11:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:25 Set A/D data flow result=40 09:11:25 Set A/D channel type result=40 09:11:25 Set A/D encoding result=40 09:11:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:25 Set channel filter=0.000000e+000 result=40 09:11:25 Config A/D Result=40 09:11:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:25 Get A/D filter: -9.255963e+061 result=40 09:11:25 Get A/D value=-858993460 result=40 09:11:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:25 Aux= 09:11:25 Message to Camera, serial 137756 queued 09:12:02 Received message from Master: op=PointingHead serial=137769 09:12:02 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:12:02 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:12:02 Point started: ret=0 09:12:02 point_skyscan result=0 09:12:03 Check angles 09:12:03 SkyScan query 09:12:04 SkyScan query done: ret=0 az=64.125<-4275 ze=66.555<-7563 Statuses=0009 0008 09:12:04 Msec=0 True Az=64.125 Ze=66.555 Az status=0009 Ze status=0008 09:12:04 Check angles 09:12:04 SkyScan query 09:12:04 SkyScan query done: ret=0 az=82.02<-5468 ze=66.495<-7567 Statuses=0009 0008 09:12:04 Msec=750 True Az=82.02 Ze=66.495 Az status=0009 Ze status=0008 09:12:05 Check angles 09:12:05 SkyScan query 09:12:05 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 09:12:05 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 09:12:05 Check angles 09:12:05 SkyScan query 09:12:06 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 09:12:06 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 09:12:06 Check angles 09:12:06 SkyScan query 09:12:07 SkyScan query done: ret=0 az=134.805<-8987 ze=66.495<-7567 Statuses=0009 0008 09:12:07 Msec=3000 True Az=134.805 Ze=66.495 Az status=0009 Ze status=0008 09:12:07 Check angles 09:12:07 SkyScan query 09:12:07 SkyScan query done: ret=0 az=152.55<-10170 ze=66.495<-7567 Statuses=0009 0008 09:12:07 Msec=3750 True Az=152.55 Ze=66.495 Az status=0009 Ze status=0008 09:12:08 Check angles 09:12:08 SkyScan query 09:12:08 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:12:08 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:12:08 Message to Master queued w/err=0: serial=137769 error=0 09:12:13 Received message from Master: op=Filter serial=137770 09:12:13 Color wheel filter change from 0 to 0 09:12:13 FLIGetFilterPos err=0 currentPosition=0 09:12:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:13 Filter is already there-color wheel unchanged 09:12:13 Received message from Master: op=Shutter serial=137771 09:12:13 Shutter LASER close 09:12:13 Received message from Camera: op=State serial=137773 09:12:13 GetSingleValue result=40 Value=cccccccc 09:12:13 SkyScan query 09:12:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:12:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:14 Parameters OK 09:12:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:14 Set A/D data flow result=40 09:12:14 Set A/D channel type result=40 09:12:14 Set A/D encoding result=40 09:12:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:14 Set channel filter=0.000000e+000 result=40 09:12:14 Config A/D Result=40 09:12:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:14 Get A/D filter: -9.255963e+061 result=40 09:12:14 Get A/D value=-858993460 result=40 09:12:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:14 Parameters OK 09:12:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:14 Set A/D data flow result=40 09:12:14 Set A/D channel type result=40 09:12:14 Set A/D encoding result=40 09:12:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:14 Set channel filter=0.000000e+000 result=40 09:12:14 Config A/D Result=40 09:12:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:14 Get A/D filter: -9.255963e+061 result=40 09:12:14 Get A/D value=-858993460 result=40 09:12:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:14 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:14 Aux= 09:12:14 Message to Camera, serial 137773 queued 09:12:51 Received message from Master: op=PointingHead serial=137786 09:12:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:12:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:12:51 Point started: ret=0 09:12:51 point_skyscan result=0 09:12:52 Check angles 09:12:52 SkyScan query 09:12:53 SkyScan query done: ret=0 az=134.715<-8981 ze=36.405<-9573 Statuses=0009 0009 09:12:53 Msec=0 True Az=134.715 Ze=36.405 Az status=0009 Ze status=0009 09:12:53 Check angles 09:12:53 SkyScan query 09:12:53 SkyScan query done: ret=0 az=117.225<-7815 ze=15.495<-10967 Statuses=0009 0009 09:12:53 Msec=750 True Az=117.225 Ze=15.495 Az status=0009 Ze status=0009 09:12:53 Check angles 09:12:53 SkyScan query 09:12:54 SkyScan query done: ret=0 az=99.495<-6633 ze=-5.97<-12398 Statuses=0009 0009 09:12:54 Msec=1500 True Az=99.495 Ze=-5.97 Az status=0009 Ze status=0009 09:12:54 Check angles 09:12:54 SkyScan query 09:12:55 SkyScan query done: ret=0 az=82.02<-5468 ze=-26.94<-13796 Statuses=0009 0009 09:12:55 Msec=2250 True Az=82.02 Ze=-26.94 Az status=0009 Ze status=0009 09:12:55 Check angles 09:12:55 SkyScan query 09:12:56 SkyScan query done: ret=0 az=64.455<-4297 ze=-38.58<-14572 Statuses=0009 0008 09:12:56 Msec=3000 True Az=64.455 Ze=-38.58 Az status=0009 Ze status=0008 09:12:56 Check angles 09:12:56 SkyScan query 09:12:56 SkyScan query done: ret=0 az=47.055<-3137 ze=-38.52<-14568 Statuses=0009 0008 09:12:56 Msec=3750 True Az=47.055 Ze=-38.52 Az status=0009 Ze status=0008 09:12:56 Check angles 09:12:56 SkyScan query 09:12:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:12:57 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:12:57 Message to Master queued w/err=0: serial=137786 error=0 09:13:02 Received message from Master: op=Filter serial=137787 09:13:02 Color wheel filter change from 0 to 0 09:13:02 FLIGetFilterPos err=0 currentPosition=0 09:13:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:02 Filter is already there-color wheel unchanged 09:13:02 Received message from Master: op=Shutter serial=137788 09:13:02 Shutter LASER close 09:13:02 Received message from Camera: op=State serial=137790 09:13:02 GetSingleValue result=40 Value=cccccccc 09:13:02 SkyScan query 09:13:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:13:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:03 Parameters OK 09:13:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:03 Set A/D data flow result=40 09:13:03 Set A/D channel type result=40 09:13:03 Set A/D encoding result=40 09:13:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:03 Set channel filter=0.000000e+000 result=40 09:13:03 Config A/D Result=40 09:13:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:03 Get A/D filter: -9.255963e+061 result=40 09:13:03 Get A/D value=-858993460 result=40 09:13:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:03 Parameters OK 09:13:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:03 Set A/D data flow result=40 09:13:03 Set A/D channel type result=40 09:13:03 Set A/D encoding result=40 09:13:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:03 Set channel filter=0.000000e+000 result=40 09:13:03 Config A/D Result=40 09:13:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:03 Get A/D filter: -9.255963e+061 result=40 09:13:03 Get A/D value=-858993460 result=40 09:13:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:03 Aux= 09:13:03 Message to Camera, serial 137790 queued 09:13:39 Received message from Master: op=PointingHead serial=137802 09:13:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:13:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:13:39 Point started: ret=0 09:13:39 point_skyscan result=0 09:13:40 Check angles 09:13:40 SkyScan query 09:13:40 SkyScan query done: ret=0 az=64.065<-4271 ze=-68.385<-16559 Statuses=0009 0009 09:13:40 Msec=0 True Az=64.065 Ze=-68.385 Az status=0009 Ze status=0009 09:13:41 Check angles 09:13:41 SkyScan query 09:13:41 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.37<-17958 Statuses=0009 0009 09:13:41 Msec=750 True Az=81.615 Ze=-89.37 Az status=0009 Ze status=0009 09:13:41 Check angles 09:13:41 SkyScan query 09:13:42 SkyScan query done: ret=0 az=98.94<-6596 ze=-110.295<-19353 Statuses=0009 0009 09:13:42 Msec=1500 True Az=98.94 Ze=-110.295 Az status=0009 Ze status=0009 09:13:42 Check angles 09:13:42 SkyScan query 09:13:43 SkyScan query done: ret=0 az=116.49<-7766 ze=-131.325<-20755 Statuses=0009 0009 09:13:43 Msec=2250 True Az=116.49 Ze=-131.325 Az status=0009 Ze status=0009 09:13:43 Check angles 09:13:43 SkyScan query 09:13:43 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 09:13:43 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 09:13:44 Check angles 09:13:44 SkyScan query 09:13:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 09:13:44 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 09:13:44 Message to Master queued w/err=0: serial=137802 error=0 09:13:49 Received message from Master: op=Filter serial=137803 09:13:49 Color wheel filter change from 0 to 0 09:13:49 FLIGetFilterPos err=0 currentPosition=0 09:13:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:49 Filter is already there-color wheel unchanged 09:13:49 Received message from Master: op=Shutter serial=137804 09:13:49 Shutter LASER close 09:13:49 Received message from Camera: op=State serial=137806 09:13:49 GetSingleValue result=40 Value=cccccccc 09:13:49 SkyScan query 09:13:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:13:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:50 Parameters OK 09:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:50 Set A/D data flow result=40 09:13:50 Set A/D channel type result=40 09:13:50 Set A/D encoding result=40 09:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:50 Set channel filter=0.000000e+000 result=40 09:13:50 Config A/D Result=40 09:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:50 Get A/D filter: -9.255963e+061 result=40 09:13:50 Get A/D value=-858993460 result=40 09:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:50 Parameters OK 09:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:50 Set A/D data flow result=40 09:13:50 Set A/D channel type result=40 09:13:50 Set A/D encoding result=40 09:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:50 Set channel filter=0.000000e+000 result=40 09:13:50 Config A/D Result=40 09:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:50 Get A/D filter: -9.255963e+061 result=40 09:13:50 Get A/D value=-858993460 result=40 09:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:50 Aux= 09:13:50 Message to Camera, serial 137806 queued 09:14:27 Received message from Master: op=PointingHead serial=137819 09:14:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:14:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:14:27 Point started: ret=0 09:14:27 point_skyscan result=0 09:14:28 Check angles 09:14:28 SkyScan query 09:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0009 0009 09:14:29 Msec=0 True Az=112.995 Ze=-171.435 Az status=0009 Ze status=0009 09:14:29 Check angles 09:14:29 SkyScan query 09:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:14:29 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:14:29 Message to Master queued w/err=0: serial=137819 error=0 09:14:34 Received message from Master: op=Filter serial=137820 09:14:34 Color wheel filter change from 0 to 0 09:14:34 FLIGetFilterPos err=0 currentPosition=0 09:14:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:34 Filter is already there-color wheel unchanged 09:14:34 Received message from Master: op=Shutter serial=137821 09:14:34 Shutter LASER open 09:14:35 Received message from Camera: op=State serial=137823 09:14:35 GetSingleValue result=40 Value=cccccccc 09:14:35 SkyScan query 09:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:14:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:35 Parameters OK 09:14:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:35 Set A/D data flow result=40 09:14:35 Set A/D channel type result=40 09:14:35 Set A/D encoding result=40 09:14:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:35 Set channel filter=0.000000e+000 result=40 09:14:35 Config A/D Result=40 09:14:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:35 Get A/D filter: -9.255963e+061 result=40 09:14:35 Get A/D value=-858993460 result=40 09:14:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:35 Parameters OK 09:14:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:35 Set A/D data flow result=40 09:14:35 Set A/D channel type result=40 09:14:35 Set A/D encoding result=40 09:14:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:35 Set channel filter=0.000000e+000 result=40 09:14:35 Config A/D Result=40 09:14:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:35 Get A/D filter: -9.255963e+061 result=40 09:14:35 Get A/D value=-858993460 result=40 09:14:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:35 Aux= 09:14:35 Message to Camera, serial 137823 queued 09:14:44 Received message from Master: op=Shutter serial=137833 09:14:44 Shutter LASER close 09:14:44 Received message from Master: op=PointingHead serial=137837 09:14:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:14:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:14:45 Point started: ret=0 09:14:45 point_skyscan result=0 09:14:45 Check angles 09:14:45 SkyScan query 09:14:46 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.49<-21566 Statuses=0009 0009 09:14:46 Msec=0 True Az=135.705 Ze=-143.49 Az status=0009 Ze status=0009 09:14:46 Check angles 09:14:46 SkyScan query 09:14:47 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.07<-20138 Statuses=0009 0009 09:14:47 Msec=750 True Az=153.57 Ze=-122.07 Az status=0009 Ze status=0009 09:14:47 Check angles 09:14:47 SkyScan query 09:14:47 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.13<-18742 Statuses=0009 0009 09:14:47 Msec=1500 True Az=171.075 Ze=-101.13 Az status=0009 Ze status=0009 09:14:48 Check angles 09:14:48 SkyScan query 09:14:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.205<-17347 Statuses=0008 0009 09:14:48 Msec=2250 True Az=176.01 Ze=-80.205 Az status=0008 Ze status=0009 09:14:48 Check angles 09:14:48 SkyScan query 09:14:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.235<-15949 Statuses=0008 0009 09:14:49 Msec=3000 True Az=176.01 Ze=-59.235 Az status=0008 Ze status=0009 09:14:49 Check angles 09:14:49 SkyScan query 09:14:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 09:14:50 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 09:14:50 Message to Master queued w/err=0: serial=137837 error=0 09:14:55 Received message from Master: op=Filter serial=137838 09:14:55 Color wheel filter change from 0 to 0 09:14:55 FLIGetFilterPos err=0 currentPosition=0 09:14:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:55 Filter is already there-color wheel unchanged 09:14:55 Received message from Master: op=Shutter serial=137839 09:14:55 Shutter LASER close 09:14:55 Received message from Camera: op=State serial=137841 09:14:55 GetSingleValue result=40 Value=cccccccc 09:14:55 SkyScan query 09:14:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:14:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:56 Parameters OK 09:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:56 Set A/D data flow result=40 09:14:56 Set A/D channel type result=40 09:14:56 Set A/D encoding result=40 09:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:56 Set channel filter=0.000000e+000 result=40 09:14:56 Config A/D Result=40 09:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:56 Get A/D filter: -9.255963e+061 result=40 09:14:56 Get A/D value=-858993460 result=40 09:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:56 Parameters OK 09:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:56 Set A/D data flow result=40 09:14:56 Set A/D channel type result=40 09:14:56 Set A/D encoding result=40 09:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:56 Set channel filter=0.000000e+000 result=40 09:14:56 Config A/D Result=40 09:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:56 Get A/D filter: -9.255963e+061 result=40 09:14:56 Get A/D value=-858993460 result=40 09:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:56 Aux= 09:14:56 Message to Camera, serial 137841 queued 09:15:27 Received message from Master: op=Identify serial=137845 09:15:32 Received message from Master: op=PointingHead serial=137857 09:15:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:15:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:15:33 Point started: ret=0 09:15:33 point_skyscan result=0 09:15:33 Check angles 09:15:33 SkyScan query 09:15:34 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.63<-13442 Statuses=0009 0009 09:15:34 Msec=0 True Az=152.925 Ze=-21.63 Az status=0009 Ze status=0009 [UTC 2018-12-14 09:15:34] 09:15:34 Check angles 09:15:34 SkyScan query 09:15:35 SkyScan query done: ret=0 az=133.815<-8921 ze=1.125<-11925 Statuses=0009 0009 09:15:35 Msec=750 True Az=133.815 Ze=1.125 Az status=0009 Ze status=0009 09:15:35 Check angles 09:15:35 SkyScan query 09:15:36 SkyScan query done: ret=0 az=117.795<-7853 ze=20.325<-10645 Statuses=0009 0009 09:15:36 Msec=1500 True Az=117.795 Ze=20.325 Az status=0009 Ze status=0009 09:15:36 Check angles 09:15:36 SkyScan query 09:15:36 SkyScan query done: ret=0 az=100.14<-6676 ze=41.745<-9217 Statuses=0009 0009 09:15:36 Msec=2250 True Az=100.14 Ze=41.745 Az status=0009 Ze status=0009 09:15:36 Check angles 09:15:36 SkyScan query 09:15:37 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:15:37 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:15:37 Check angles 09:15:37 SkyScan query 09:15:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:15:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:15:38 Message to Master queued w/err=0: serial=137857 error=0 09:15:43 Received message from Master: op=Filter serial=137858 09:15:43 Color wheel filter change from 0 to 0 09:15:43 FLIGetFilterPos err=0 currentPosition=0 09:15:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:43 Filter is already there-color wheel unchanged 09:15:43 Received message from Master: op=Shutter serial=137859 09:15:43 Shutter LASER close 09:15:43 Received message from Camera: op=State serial=137861 09:15:43 GetSingleValue result=40 Value=cccccccc 09:15:43 SkyScan query 09:15:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:15:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:44 Parameters OK 09:15:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:44 Set A/D data flow result=40 09:15:44 Set A/D channel type result=40 09:15:44 Set A/D encoding result=40 09:15:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:44 Set channel filter=0.000000e+000 result=40 09:15:44 Config A/D Result=40 09:15:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:44 Get A/D filter: -9.255963e+061 result=40 09:15:44 Get A/D value=-858993460 result=40 09:15:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:44 Parameters OK 09:15:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:44 Set A/D data flow result=40 09:15:44 Set A/D channel type result=40 09:15:44 Set A/D encoding result=40 09:15:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:44 Set channel filter=0.000000e+000 result=40 09:15:44 Config A/D Result=40 09:15:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:44 Get A/D filter: -9.255963e+061 result=40 09:15:44 Get A/D value=-858993460 result=40 09:15:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:44 Aux= 09:15:44 Message to Camera, serial 137861 queued [UTC 2018-12-14 09:15:52] 09:16:20 Received message from Master: op=PointingHead serial=137874 09:16:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:16:20 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:16:21 Point started: ret=0 09:16:21 point_skyscan result=0 09:16:22 Check angles 09:16:22 SkyScan query 09:16:22 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 09:16:22 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 09:16:22 Check angles 09:16:22 SkyScan query 09:16:23 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 09:16:23 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 09:16:23 Check angles 09:16:23 SkyScan query 09:16:24 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 09:16:24 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 09:16:24 Check angles 09:16:24 SkyScan query 09:16:24 SkyScan query done: ret=0 az=161.295<-10753 ze=38.505<-9433 Statuses=0009 0008 09:16:24 Msec=2250 True Az=161.295 Ze=38.505 Az status=0009 Ze status=0008 09:16:25 Check angles 09:16:25 SkyScan query 09:16:25 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:16:25 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:16:25 Check angles 09:16:25 SkyScan query 09:16:26 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:16:26 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:16:26 Message to Master queued w/err=0: serial=137874 error=0 09:16:31 Received message from Master: op=Filter serial=137875 09:16:31 Color wheel filter change from 0 to 0 09:16:31 FLIGetFilterPos err=0 currentPosition=0 09:16:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:31 Filter is already there-color wheel unchanged 09:16:31 Received message from Master: op=Shutter serial=137876 09:16:31 Shutter LASER close 09:16:31 Received message from Camera: op=State serial=137878 09:16:31 GetSingleValue result=40 Value=cccccccc 09:16:31 SkyScan query 09:16:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:16:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:32 Parameters OK 09:16:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:32 Set A/D data flow result=40 09:16:32 Set A/D channel type result=40 09:16:32 Set A/D encoding result=40 09:16:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:32 Set channel filter=0.000000e+000 result=40 09:16:32 Config A/D Result=40 09:16:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:32 Get A/D filter: -9.255963e+061 result=40 09:16:32 Get A/D value=-858993460 result=40 09:16:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:32 Parameters OK 09:16:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:32 Set A/D data flow result=40 09:16:32 Set A/D channel type result=40 09:16:32 Set A/D encoding result=40 09:16:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:32 Set channel filter=0.000000e+000 result=40 09:16:32 Config A/D Result=40 09:16:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:32 Get A/D filter: -9.255963e+061 result=40 09:16:32 Get A/D value=-858993460 result=40 09:16:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:32 Aux= 09:16:32 Message to Camera, serial 137878 queued 09:17:09 Received message from Master: op=PointingHead serial=137891 09:17:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:17:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:17:09 Point started: ret=0 09:17:09 point_skyscan result=0 09:17:10 Check angles 09:17:10 SkyScan query 09:17:10 SkyScan query done: ret=0 az=152.7<-10180 ze=8.19<-11454 Statuses=0009 0009 09:17:10 Msec=0 True Az=152.7 Ze=8.19 Az status=0009 Ze status=0009 09:17:10 Check angles 09:17:10 SkyScan query 09:17:11 SkyScan query done: ret=0 az=135.105<-9007 ze=-12.675<-12845 Statuses=0009 0009 09:17:11 Msec=750 True Az=135.105 Ze=-12.675 Az status=0009 Ze status=0009 09:17:11 Check angles 09:17:11 SkyScan query 09:17:12 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.675<-14245 Statuses=0009 0009 09:17:12 Msec=1500 True Az=117.585 Ze=-33.675 Az status=0009 Ze status=0009 09:17:12 Check angles 09:17:12 SkyScan query 09:17:12 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.57<-15438 Statuses=0009 0009 09:17:12 Msec=2250 True Az=100.23 Ze=-51.57 Az status=0009 Ze status=0009 09:17:13 Check angles 09:17:13 SkyScan query 09:17:13 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 09:17:13 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 09:17:13 Check angles 09:17:13 SkyScan query 09:17:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:17:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:17:14 Message to Master queued w/err=0: serial=137891 error=0 09:17:19 Received message from Master: op=Filter serial=137892 09:17:19 Color wheel filter change from 0 to 0 09:17:19 FLIGetFilterPos err=0 currentPosition=0 09:17:19 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:19 Filter is already there-color wheel unchanged 09:17:19 Received message from Master: op=Shutter serial=137893 09:17:19 Shutter LASER close 09:17:19 Received message from Camera: op=State serial=137895 09:17:19 GetSingleValue result=40 Value=cccccccc 09:17:19 SkyScan query 09:17:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:17:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:20 Parameters OK 09:17:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:20 Set A/D data flow result=40 09:17:20 Set A/D channel type result=40 09:17:20 Set A/D encoding result=40 09:17:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:20 Set channel filter=0.000000e+000 result=40 09:17:20 Config A/D Result=40 09:17:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:20 Get A/D filter: -9.255963e+061 result=40 09:17:20 Get A/D value=-858993460 result=40 09:17:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:20 Parameters OK 09:17:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:20 Set A/D data flow result=40 09:17:20 Set A/D channel type result=40 09:17:20 Set A/D encoding result=40 09:17:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:20 Set channel filter=0.000000e+000 result=40 09:17:20 Config A/D Result=40 09:17:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:20 Get A/D filter: -9.255963e+061 result=40 09:17:20 Get A/D value=-858993460 result=40 09:17:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:20 Aux= 09:17:20 Message to Camera, serial 137895 queued 09:17:57 Received message from Master: op=PointingHead serial=137908 09:17:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:17:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:17:57 Point started: ret=0 09:17:57 point_skyscan result=0 09:17:58 Check angles 09:17:58 SkyScan query 09:17:58 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.195<-17413 Statuses=0009 0009 09:17:58 Msec=0 True Az=108.945 Ze=-81.195 Az status=0009 Ze status=0009 09:17:59 Check angles 09:17:59 SkyScan query 09:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 09:17:59 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 09:17:59 Check angles 09:17:59 SkyScan query 09:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.555<-20237 Statuses=0008 0009 09:18:00 Msec=1500 True Az=112.995 Ze=-123.555 Az status=0008 Ze status=0009 09:18:00 Check angles 09:18:00 SkyScan query 09:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 09:18:01 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 09:18:01 Check angles 09:18:01 SkyScan query 09:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.465<-23031 Statuses=0008 0009 09:18:01 Msec=3000 True Az=112.995 Ze=-165.465 Az status=0008 Ze status=0009 09:18:02 Check angles 09:18:02 SkyScan query 09:18:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:18:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:18:02 Message to Master queued w/err=0: serial=137908 error=0 09:18:07 Received message from Master: op=Filter serial=137909 09:18:07 Color wheel filter change from 0 to 0 09:18:07 FLIGetFilterPos err=0 currentPosition=0 09:18:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:07 Filter is already there-color wheel unchanged 09:18:07 Received message from Master: op=Shutter serial=137910 09:18:07 Shutter LASER open 09:18:07 Received message from Camera: op=State serial=137912 09:18:07 GetSingleValue result=40 Value=cccccccc 09:18:07 SkyScan query 09:18:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:18:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:08 Parameters OK 09:18:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:08 Set A/D data flow result=40 09:18:08 Set A/D channel type result=40 09:18:08 Set A/D encoding result=40 09:18:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:08 Set channel filter=0.000000e+000 result=40 09:18:08 Config A/D Result=40 09:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:08 Get A/D filter: -9.255963e+061 result=40 09:18:08 Get A/D value=-858993460 result=40 09:18:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:08 Parameters OK 09:18:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:08 Set A/D data flow result=40 09:18:08 Set A/D channel type result=40 09:18:08 Set A/D encoding result=40 09:18:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:08 Set channel filter=0.000000e+000 result=40 09:18:08 Config A/D Result=40 09:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:08 Get A/D filter: -9.255963e+061 result=40 09:18:08 Get A/D value=-858993460 result=40 09:18:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:08 Aux= 09:18:08 Message to Camera, serial 137912 queued 09:18:16 Received message from Master: op=Shutter serial=137922 09:18:16 Shutter LASER close 09:18:17 Received message from Master: op=PointingHead serial=137926 09:18:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:18:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:18:17 Point started: ret=0 09:18:17 point_skyscan result=0 09:18:18 Check angles 09:18:18 SkyScan query 09:18:19 SkyScan query done: ret=0 az=89.835<-5989 ze=157.11<-1526 Statuses=0009 0009 09:18:19 Msec=0 True Az=89.835 Ze=157.11 Az status=0009 Ze status=0009 09:18:19 Check angles 09:18:19 SkyScan query 09:18:19 SkyScan query done: ret=0 az=71.925<-4795 ze=135.765<-2949 Statuses=0009 0009 09:18:19 Msec=750 True Az=71.925 Ze=135.765 Az status=0009 Ze status=0009 09:18:20 Check angles 09:18:20 SkyScan query 09:18:20 SkyScan query done: ret=0 az=54.51<-3634 ze=114.735<-4351 Statuses=0009 0009 09:18:20 Msec=1500 True Az=54.51 Ze=114.735 Az status=0009 Ze status=0009 09:18:20 Check angles 09:18:20 SkyScan query 09:18:21 SkyScan query done: ret=0 az=40.98<-2732 ze=93.825<-5745 Statuses=0009 0009 09:18:21 Msec=2250 True Az=40.98 Ze=93.825 Az status=0009 Ze status=0009 09:18:21 Check angles 09:18:21 SkyScan query 09:18:22 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 09:18:22 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 09:18:22 Check angles 09:18:22 SkyScan query 09:18:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 09:18:22 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 09:18:23 Check angles 09:18:23 SkyScan query 09:18:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:18:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:18:23 Message to Master queued w/err=0: serial=137926 error=0 09:18:28 Received message from Master: op=Filter serial=137927 09:18:28 Color wheel filter change from 0 to 0 09:18:28 FLIGetFilterPos err=0 currentPosition=0 09:18:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:28 Filter is already there-color wheel unchanged 09:18:28 Received message from Master: op=Shutter serial=137928 09:18:28 Shutter LASER close 09:18:28 Received message from Camera: op=State serial=137930 09:18:28 GetSingleValue result=40 Value=cccccccc 09:18:28 SkyScan query 09:18:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:18:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:29 Parameters OK 09:18:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:29 Set A/D data flow result=40 09:18:29 Set A/D channel type result=40 09:18:29 Set A/D encoding result=40 09:18:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:29 Set channel filter=0.000000e+000 result=40 09:18:29 Config A/D Result=40 09:18:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:29 Get A/D filter: -9.255963e+061 result=40 09:18:29 Get A/D value=-858993460 result=40 09:18:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:29 Parameters OK 09:18:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:29 Set A/D data flow result=40 09:18:29 Set A/D channel type result=40 09:18:29 Set A/D encoding result=40 09:18:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:29 Set channel filter=0.000000e+000 result=40 09:18:29 Config A/D Result=40 09:18:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:29 Get A/D filter: -9.255963e+061 result=40 09:18:29 Get A/D value=-858993460 result=40 09:18:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:29 Aux= 09:18:29 Message to Camera, serial 137930 queued 09:19:06 Received message from Master: op=PointingHead serial=137943 09:19:06 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:19:06 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:19:06 Point started: ret=0 09:19:06 point_skyscan result=0 09:19:07 Check angles 09:19:07 SkyScan query 09:19:08 SkyScan query done: ret=0 az=64.125<-4275 ze=66.57<-7562 Statuses=0009 0008 09:19:08 Msec=0 True Az=64.125 Ze=66.57 Az status=0009 Ze status=0008 09:19:08 Check angles 09:19:08 SkyScan query 09:19:08 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 09:19:08 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 09:19:08 Check angles 09:19:08 SkyScan query 09:19:09 SkyScan query done: ret=0 az=99<-6600 ze=66.51<-7566 Statuses=0009 0008 09:19:09 Msec=1500 True Az=99 Ze=66.51 Az status=0009 Ze status=0008 09:19:09 Check angles 09:19:09 SkyScan query 09:19:10 SkyScan query done: ret=0 az=116.595<-7773 ze=66.51<-7566 Statuses=0009 0008 09:19:10 Msec=2250 True Az=116.595 Ze=66.51 Az status=0009 Ze status=0008 09:19:10 Check angles 09:19:10 SkyScan query 09:19:11 SkyScan query done: ret=0 az=134.355<-8957 ze=66.51<-7566 Statuses=0009 0008 09:19:11 Msec=3000 True Az=134.355 Ze=66.51 Az status=0009 Ze status=0008 09:19:11 Check angles 09:19:11 SkyScan query 09:19:11 SkyScan query done: ret=0 az=152.115<-10141 ze=66.51<-7566 Statuses=0009 0008 09:19:11 Msec=3750 True Az=152.115 Ze=66.51 Az status=0009 Ze status=0008 09:19:11 Check angles 09:19:11 SkyScan query 09:19:12 SkyScan query done: ret=0 az=158.01<-10534 ze=66.51<-7566 Statuses=0008 0008 09:19:12 Msec=4500 True Az=158.01 Ze=66.51 Az status=0008 Ze status=0008 09:19:12 Message to Master queued w/err=0: serial=137943 error=0 09:19:17 Received message from Master: op=Filter serial=137944 09:19:17 Color wheel filter change from 0 to 0 09:19:17 FLIGetFilterPos err=0 currentPosition=0 09:19:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:17 Filter is already there-color wheel unchanged 09:19:17 Received message from Master: op=Shutter serial=137945 09:19:17 Shutter LASER close 09:19:17 Received message from Camera: op=State serial=137947 09:19:17 GetSingleValue result=40 Value=cccccccc 09:19:17 SkyScan query 09:19:18 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 09:19:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:18 Parameters OK 09:19:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:18 Set A/D data flow result=40 09:19:18 Set A/D channel type result=40 09:19:18 Set A/D encoding result=40 09:19:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:18 Set channel filter=0.000000e+000 result=40 09:19:18 Config A/D Result=40 09:19:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:18 Get A/D filter: -9.255963e+061 result=40 09:19:18 Get A/D value=-858993460 result=40 09:19:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:18 Parameters OK 09:19:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:18 Set A/D data flow result=40 09:19:18 Set A/D channel type result=40 09:19:18 Set A/D encoding result=40 09:19:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:18 Set channel filter=0.000000e+000 result=40 09:19:18 Config A/D Result=40 09:19:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:18 Get A/D filter: -9.255963e+061 result=40 09:19:18 Get A/D value=-858993460 result=40 09:19:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:18 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:18 Aux= 09:19:18 Message to Camera, serial 137947 queued 09:19:55 Received message from Master: op=PointingHead serial=137960 09:19:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:19:55 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:19:55 Point started: ret=0 09:19:55 point_skyscan result=0 09:19:56 Check angles 09:19:56 SkyScan query 09:19:56 SkyScan query done: ret=0 az=135.24<-9016 ze=36.96<-9536 Statuses=0009 0009 09:19:56 Msec=0 True Az=135.24 Ze=36.96 Az status=0009 Ze status=0009 09:19:57 Check angles 09:19:57 SkyScan query 09:19:57 SkyScan query done: ret=0 az=117.765<-7851 ze=15.99<-10934 Statuses=0009 0009 09:19:57 Msec=750 True Az=117.765 Ze=15.99 Az status=0009 Ze status=0009 09:19:57 Check angles 09:19:57 SkyScan query 09:19:58 SkyScan query done: ret=0 az=100.365<-6691 ze=-4.92<-12328 Statuses=0009 0009 09:19:58 Msec=1500 True Az=100.365 Ze=-4.92 Az status=0009 Ze status=0009 09:19:58 Check angles 09:19:58 SkyScan query 09:19:59 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.31<-13754 Statuses=0009 0009 09:19:59 Msec=2250 True Az=82.44 Ze=-26.31 Az status=0009 Ze status=0009 09:19:59 Check angles 09:19:59 SkyScan query 09:19:59 SkyScan query done: ret=0 az=65.01<-4334 ze=-38.58<-14572 Statuses=0009 0008 09:19:59 Msec=3000 True Az=65.01 Ze=-38.58 Az status=0009 Ze status=0008 09:20:00 Check angles 09:20:00 SkyScan query 09:20:00 SkyScan query done: ret=0 az=47.475<-3165 ze=-38.52<-14568 Statuses=0009 0008 09:20:00 Msec=3750 True Az=47.475 Ze=-38.52 Az status=0009 Ze status=0008 09:20:00 Check angles 09:20:00 SkyScan query 09:20:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:20:01 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:20:01 Message to Master queued w/err=0: serial=137960 error=0 09:20:06 Received message from Master: op=Filter serial=137961 09:20:06 Color wheel filter change from 0 to 0 09:20:06 FLIGetFilterPos err=0 currentPosition=0 09:20:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:06 Filter is already there-color wheel unchanged 09:20:06 Received message from Master: op=Shutter serial=137962 09:20:06 Shutter LASER close 09:20:06 Received message from Camera: op=State serial=137964 09:20:06 GetSingleValue result=40 Value=cccccccc 09:20:06 SkyScan query 09:20:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:20:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:07 Parameters OK 09:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:07 Set A/D data flow result=40 09:20:07 Set A/D channel type result=40 09:20:07 Set A/D encoding result=40 09:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:07 Set channel filter=0.000000e+000 result=40 09:20:07 Config A/D Result=40 09:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:07 Get A/D filter: -9.255963e+061 result=40 09:20:07 Get A/D value=-858993460 result=40 09:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:07 Parameters OK 09:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:07 Set A/D data flow result=40 09:20:07 Set A/D channel type result=40 09:20:07 Set A/D encoding result=40 09:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:07 Set channel filter=0.000000e+000 result=40 09:20:07 Config A/D Result=40 09:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:07 Get A/D filter: -9.255963e+061 result=40 09:20:07 Get A/D value=-858993460 result=40 09:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:07 Aux= 09:20:07 Message to Camera, serial 137964 queued 09:20:44 Received message from Master: op=PointingHead serial=137977 09:20:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:20:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:20:44 Point started: ret=0 09:20:44 point_skyscan result=0 09:20:45 Check angles 09:20:45 SkyScan query 09:20:45 SkyScan query done: ret=0 az=63.72<-4248 ze=-68.01<-16534 Statuses=0009 0009 09:20:45 Msec=0 True Az=63.72 Ze=-68.01 Az status=0009 Ze status=0009 09:20:45 Check angles 09:20:45 SkyScan query 09:20:46 SkyScan query done: ret=0 az=81.225<-5415 ze=-88.98<-17932 Statuses=0009 0009 09:20:46 Msec=750 True Az=81.225 Ze=-88.98 Az status=0009 Ze status=0009 09:20:46 Check angles 09:20:46 SkyScan query 09:20:47 SkyScan query done: ret=0 az=98.985<-6599 ze=-110.385<-19359 Statuses=0009 0009 09:20:47 Msec=1500 True Az=98.985 Ze=-110.385 Az status=0009 Ze status=0009 09:20:47 Check angles 09:20:47 SkyScan query 09:20:47 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.73<-20782 Statuses=0009 0009 09:20:47 Msec=2250 True Az=116.895 Ze=-131.73 Az status=0009 Ze status=0009 09:20:48 Check angles 09:20:48 SkyScan query 09:20:48 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 09:20:48 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 09:20:48 Check angles 09:20:48 SkyScan query 09:20:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 09:20:49 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 09:20:49 Message to Master queued w/err=0: serial=137977 error=0 09:20:54 Received message from Master: op=Filter serial=137978 09:20:54 Color wheel filter change from 0 to 0 09:20:54 FLIGetFilterPos err=0 currentPosition=0 09:20:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:54 Filter is already there-color wheel unchanged 09:20:54 Received message from Master: op=Shutter serial=137979 09:20:54 Shutter LASER close 09:20:54 Received message from Camera: op=State serial=137981 09:20:54 GetSingleValue result=40 Value=cccccccc 09:20:54 SkyScan query 09:20:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:20:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:55 Parameters OK 09:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:55 Set A/D data flow result=40 09:20:55 Set A/D channel type result=40 09:20:55 Set A/D encoding result=40 09:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:55 Set channel filter=0.000000e+000 result=40 09:20:55 Config A/D Result=40 09:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:55 Get A/D filter: -9.255963e+061 result=40 09:20:55 Get A/D value=-858993460 result=40 09:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:55 Parameters OK 09:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:55 Set A/D data flow result=40 09:20:55 Set A/D channel type result=40 09:20:55 Set A/D encoding result=40 09:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:55 Set channel filter=0.000000e+000 result=40 09:20:55 Config A/D Result=40 09:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:55 Get A/D filter: -9.255963e+061 result=40 09:20:55 Get A/D value=-858993460 result=40 09:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:55 Aux= 09:20:55 Message to Camera, serial 137981 queued 09:21:32 Received message from Master: op=PointingHead serial=137994 09:21:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:21:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:21:32 Point started: ret=0 09:21:32 point_skyscan result=0 09:21:33 Check angles 09:21:33 SkyScan query 09:21:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 09:21:33 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 09:21:33 Check angles 09:21:33 SkyScan query 09:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:21:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:21:34 Message to Master queued w/err=0: serial=137994 error=0 09:21:39 Received message from Master: op=Filter serial=137995 09:21:39 Color wheel filter change from 0 to 0 09:21:39 FLIGetFilterPos err=0 currentPosition=0 09:21:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:39 Filter is already there-color wheel unchanged 09:21:39 Received message from Master: op=Shutter serial=137996 09:21:39 Shutter LASER open 09:21:39 Received message from Camera: op=State serial=137998 09:21:39 GetSingleValue result=40 Value=cccccccc 09:21:39 SkyScan query 09:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:21:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:40 Parameters OK 09:21:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:40 Set A/D data flow result=40 09:21:40 Set A/D channel type result=40 09:21:40 Set A/D encoding result=40 09:21:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:40 Set channel filter=0.000000e+000 result=40 09:21:40 Config A/D Result=40 09:21:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:40 Get A/D filter: -9.255963e+061 result=40 09:21:40 Get A/D value=-858993460 result=40 09:21:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:40 Parameters OK 09:21:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:40 Set A/D data flow result=40 09:21:40 Set A/D channel type result=40 09:21:40 Set A/D encoding result=40 09:21:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:40 Set channel filter=0.000000e+000 result=40 09:21:40 Config A/D Result=40 09:21:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:40 Get A/D filter: -9.255963e+061 result=40 09:21:40 Get A/D value=-858993460 result=40 09:21:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:40 Aux= 09:21:40 Message to Camera, serial 137998 queued 09:21:48 Received message from Master: op=Shutter serial=138008 09:21:48 Shutter LASER close 09:21:49 Received message from Master: op=PointingHead serial=138012 09:21:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:21:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:21:49 Point started: ret=0 09:21:49 point_skyscan result=0 09:21:50 Check angles 09:21:50 SkyScan query 09:21:51 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.34<-21556 Statuses=0009 0009 09:21:51 Msec=0 True Az=135.9 Ze=-143.34 Az status=0009 Ze status=0009 09:21:51 Check angles 09:21:51 SkyScan query 09:21:51 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.935<-20129 Statuses=0009 0009 09:21:51 Msec=750 True Az=153.765 Ze=-121.935 Az status=0009 Ze status=0009 09:21:52 Check angles 09:21:52 SkyScan query 09:21:52 SkyScan query done: ret=0 az=171.255<-11417 ze=-100.965<-18731 Statuses=0009 0009 09:21:52 Msec=1500 True Az=171.255 Ze=-100.965 Az status=0009 Ze status=0009 09:21:52 Check angles 09:21:52 SkyScan query 09:21:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.07<-17338 Statuses=0008 0009 09:21:53 Msec=2250 True Az=176.01 Ze=-80.07 Az status=0008 Ze status=0009 09:21:53 Check angles 09:21:53 SkyScan query 09:21:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.605<-15907 Statuses=0008 0009 09:21:54 Msec=3000 True Az=176.01 Ze=-58.605 Az status=0008 Ze status=0009 09:21:54 Check angles 09:21:54 SkyScan query 09:21:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:21:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:21:54 Message to Master queued w/err=0: serial=138012 error=0 09:21:59 Received message from Master: op=Filter serial=138013 09:21:59 Color wheel filter change from 0 to 0 09:21:59 FLIGetFilterPos err=0 currentPosition=0 09:21:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:59 Filter is already there-color wheel unchanged 09:22:00 Received message from Master: op=Shutter serial=138014 09:22:00 Shutter LASER close 09:22:00 Received message from Camera: op=State serial=138016 09:22:00 GetSingleValue result=40 Value=cccccccc 09:22:00 SkyScan query 09:22:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:22:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:00 Parameters OK 09:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:00 Set A/D data flow result=40 09:22:00 Set A/D channel type result=40 09:22:00 Set A/D encoding result=40 09:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:00 Set channel filter=0.000000e+000 result=40 09:22:00 Config A/D Result=40 09:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:00 Get A/D filter: -9.255963e+061 result=40 09:22:00 Get A/D value=-858993460 result=40 09:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:00 Parameters OK 09:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:00 Set A/D data flow result=40 09:22:00 Set A/D channel type result=40 09:22:00 Set A/D encoding result=40 09:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:00 Set channel filter=0.000000e+000 result=40 09:22:00 Config A/D Result=40 09:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:00 Get A/D filter: -9.255963e+061 result=40 09:22:00 Get A/D value=-858993460 result=40 09:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:00 Aux= 09:22:00 Message to Camera, serial 138016 queued 09:22:36 Received message from Master: op=PointingHead serial=138028 09:22:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:22:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:22:37 Point started: ret=0 09:22:37 point_skyscan result=0 09:22:37 Check angles 09:22:37 SkyScan query 09:22:38 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.78<-13452 Statuses=0009 0009 09:22:38 Msec=0 True Az=152.925 Ze=-21.78 Az status=0009 Ze status=0009 09:22:38 Check angles 09:22:38 SkyScan query 09:22:39 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.78<-12052 Statuses=0009 0009 09:22:39 Msec=750 True Az=135.36 Ze=-0.78 Az status=0009 Ze status=0009 09:22:39 Check angles 09:22:39 SkyScan query 09:22:40 SkyScan query done: ret=0 az=117.765<-7851 ze=20.16<-10656 Statuses=0009 0009 09:22:40 Msec=1500 True Az=117.765 Ze=20.16 Az status=0009 Ze status=0009 09:22:40 Check angles 09:22:40 SkyScan query 09:22:40 SkyScan query done: ret=0 az=100.41<-6694 ze=41.13<-9258 Statuses=0009 0009 09:22:40 Msec=2250 True Az=100.41 Ze=41.13 Az status=0009 Ze status=0009 09:22:40 Check angles 09:22:40 SkyScan query 09:22:41 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 09:22:41 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 09:22:41 Check angles 09:22:41 SkyScan query 09:22:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:22:42 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:22:42 Message to Master queued w/err=0: serial=138028 error=0 09:22:47 Received message from Master: op=Filter serial=138029 09:22:47 Color wheel filter change from 0 to 0 09:22:47 FLIGetFilterPos err=0 currentPosition=0 09:22:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:47 Filter is already there-color wheel unchanged 09:22:47 Received message from Master: op=Shutter serial=138030 09:22:47 Shutter LASER close 09:22:47 Received message from Camera: op=State serial=138032 09:22:47 GetSingleValue result=40 Value=cccccccc 09:22:47 SkyScan query 09:22:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:22:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:48 Parameters OK 09:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:48 Set A/D data flow result=40 09:22:48 Set A/D channel type result=40 09:22:48 Set A/D encoding result=40 09:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:48 Set channel filter=0.000000e+000 result=40 09:22:48 Config A/D Result=40 09:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:48 Get A/D filter: -9.255963e+061 result=40 09:22:48 Get A/D value=-858993460 result=40 09:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:48 Parameters OK 09:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:48 Set A/D data flow result=40 09:22:48 Set A/D channel type result=40 09:22:48 Set A/D encoding result=40 09:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:48 Set channel filter=0.000000e+000 result=40 09:22:48 Config A/D Result=40 09:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:48 Get A/D filter: -9.255963e+061 result=40 09:22:48 Get A/D value=-858993460 result=40 09:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:48 Aux= 09:22:48 Message to Camera, serial 138032 queued 09:23:24 Received message from Master: op=PointingHead serial=138045 09:23:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:23:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:23:25 Point started: ret=0 09:23:25 point_skyscan result=0 09:23:25 Check angles 09:23:25 SkyScan query 09:23:26 SkyScan query done: ret=0 az=108.75<-7250 ze=38.49<-9434 Statuses=0009 0008 09:23:26 Msec=0 True Az=108.75 Ze=38.49 Az status=0009 Ze status=0008 09:23:26 Check angles 09:23:26 SkyScan query 09:23:27 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 09:23:27 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 09:23:27 Check angles 09:23:27 SkyScan query 09:23:28 SkyScan query done: ret=0 az=144.15<-9610 ze=38.505<-9433 Statuses=0009 0008 09:23:28 Msec=1500 True Az=144.15 Ze=38.505 Az status=0009 Ze status=0008 09:23:28 Check angles 09:23:28 SkyScan query 09:23:28 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 09:23:28 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 09:23:28 Check angles 09:23:28 SkyScan query 09:23:29 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:23:29 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:23:29 Check angles 09:23:29 SkyScan query 09:23:30 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:23:30 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:23:30 Message to Master queued w/err=0: serial=138045 error=0 09:23:35 Received message from Master: op=Filter serial=138046 09:23:35 Color wheel filter change from 0 to 0 09:23:35 FLIGetFilterPos err=0 currentPosition=0 09:23:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:35 Filter is already there-color wheel unchanged 09:23:35 Received message from Master: op=Shutter serial=138047 09:23:35 Shutter LASER close 09:23:35 Received message from Camera: op=State serial=138049 09:23:35 GetSingleValue result=40 Value=cccccccc 09:23:35 SkyScan query 09:23:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:23:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:36 Parameters OK 09:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:36 Set A/D data flow result=40 09:23:36 Set A/D channel type result=40 09:23:36 Set A/D encoding result=40 09:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:36 Set channel filter=0.000000e+000 result=40 09:23:36 Config A/D Result=40 09:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:36 Get A/D filter: -9.255963e+061 result=40 09:23:36 Get A/D value=-858993460 result=40 09:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:36 Parameters OK 09:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:36 Set A/D data flow result=40 09:23:36 Set A/D channel type result=40 09:23:36 Set A/D encoding result=40 09:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:36 Set channel filter=0.000000e+000 result=40 09:23:36 Config A/D Result=40 09:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:36 Get A/D filter: -9.255963e+061 result=40 09:23:36 Get A/D value=-858993460 result=40 09:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:36 Aux= 09:23:36 Message to Camera, serial 138049 queued 09:24:12 Received message from Master: op=PointingHead serial=138062 09:24:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:24:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:24:13 Point started: ret=0 09:24:13 point_skyscan result=0 09:24:14 Check angles 09:24:14 SkyScan query 09:24:14 SkyScan query done: ret=0 az=152.955<-10197 ze=8.805<-11413 Statuses=0009 0009 09:24:14 Msec=0 True Az=152.955 Ze=8.805 Az status=0009 Ze status=0009 09:24:14 Check angles 09:24:14 SkyScan query 09:24:15 SkyScan query done: ret=0 az=135.63<-9042 ze=-12.195<-12813 Statuses=0009 0009 09:24:15 Msec=750 True Az=135.63 Ze=-12.195 Az status=0009 Ze status=0009 09:24:15 Check angles 09:24:15 SkyScan query 09:24:16 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.585<-14239 Statuses=0009 0009 09:24:16 Msec=1500 True Az=117.6 Ze=-33.585 Az status=0009 Ze status=0009 09:24:16 Check angles 09:24:16 SkyScan query 09:24:16 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.57<-15438 Statuses=0009 0009 09:24:16 Msec=2250 True Az=100.215 Ze=-51.57 Az status=0009 Ze status=0009 09:24:17 Check angles 09:24:17 SkyScan query 09:24:17 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 09:24:17 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 09:24:17 Check angles 09:24:17 SkyScan query 09:24:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:24:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:24:18 Message to Master queued w/err=0: serial=138062 error=0 09:24:23 Received message from Master: op=Filter serial=138063 09:24:23 Color wheel filter change from 0 to 0 09:24:23 FLIGetFilterPos err=0 currentPosition=0 09:24:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:23 Filter is already there-color wheel unchanged 09:24:23 Received message from Master: op=Shutter serial=138064 09:24:23 Shutter LASER close 09:24:23 Received message from Camera: op=State serial=138066 09:24:23 GetSingleValue result=40 Value=cccccccc 09:24:23 SkyScan query 09:24:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:24:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:24 Parameters OK 09:24:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:24 Set A/D data flow result=40 09:24:24 Set A/D channel type result=40 09:24:24 Set A/D encoding result=40 09:24:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:24 Set channel filter=0.000000e+000 result=40 09:24:24 Config A/D Result=40 09:24:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:24 Get A/D filter: -9.255963e+061 result=40 09:24:24 Get A/D value=-858993460 result=40 09:24:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:24 Parameters OK 09:24:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:24 Set A/D data flow result=40 09:24:24 Set A/D channel type result=40 09:24:24 Set A/D encoding result=40 09:24:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:24 Set channel filter=0.000000e+000 result=40 09:24:24 Config A/D Result=40 09:24:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:24 Get A/D filter: -9.255963e+061 result=40 09:24:24 Get A/D value=-858993460 result=40 09:24:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:24 Aux= 09:24:24 Message to Camera, serial 138066 queued 09:25:01 Received message from Master: op=PointingHead serial=138079 09:25:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:25:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:25:01 Point started: ret=0 09:25:01 point_skyscan result=0 09:25:02 Check angles 09:25:02 SkyScan query 09:25:02 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.21<-17414 Statuses=0009 0009 09:25:02 Msec=0 True Az=108.99 Ze=-81.21 Az status=0009 Ze status=0009 09:25:02 Check angles 09:25:02 SkyScan query 09:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.18<-18812 Statuses=0008 0009 09:25:03 Msec=750 True Az=112.995 Ze=-102.18 Az status=0008 Ze status=0009 09:25:03 Check angles 09:25:03 SkyScan query 09:25:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.555<-20237 Statuses=0008 0009 09:25:04 Msec=1500 True Az=112.995 Ze=-123.555 Az status=0008 Ze status=0009 09:25:04 Check angles 09:25:04 SkyScan query 09:25:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 09:25:04 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 09:25:05 Check angles 09:25:05 SkyScan query 09:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.45<-23030 Statuses=0008 0009 09:25:05 Msec=3000 True Az=112.995 Ze=-165.45 Az status=0008 Ze status=0009 09:25:05 Check angles 09:25:05 SkyScan query 09:25:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:25:06 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:25:06 Message to Master queued w/err=0: serial=138079 error=0 09:25:11 Received message from Master: op=Filter serial=138080 09:25:11 Color wheel filter change from 0 to 0 09:25:11 FLIGetFilterPos err=0 currentPosition=0 09:25:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:11 Filter is already there-color wheel unchanged 09:25:11 Received message from Master: op=Shutter serial=138081 09:25:11 Shutter LASER open 09:25:11 Received message from Camera: op=State serial=138083 09:25:11 GetSingleValue result=40 Value=cccccccc 09:25:11 SkyScan query 09:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:25:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:12 Parameters OK 09:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:12 Set A/D data flow result=40 09:25:12 Set A/D channel type result=40 09:25:12 Set A/D encoding result=40 09:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:12 Set channel filter=0.000000e+000 result=40 09:25:12 Config A/D Result=40 09:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:12 Get A/D filter: -9.255963e+061 result=40 09:25:12 Get A/D value=-858993460 result=40 09:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:12 Parameters OK 09:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:12 Set A/D data flow result=40 09:25:12 Set A/D channel type result=40 09:25:12 Set A/D encoding result=40 09:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:12 Set channel filter=0.000000e+000 result=40 09:25:12 Config A/D Result=40 09:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:12 Get A/D filter: -9.255963e+061 result=40 09:25:12 Get A/D value=-858993460 result=40 09:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:12 Aux= 09:25:12 Message to Camera, serial 138083 queued 09:25:20 Received message from Master: op=Shutter serial=138093 09:25:20 Shutter LASER close 09:25:21 Received message from Master: op=PointingHead serial=138097 09:25:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:25:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:25:21 Point started: ret=0 09:25:21 point_skyscan result=0 09:25:22 Check angles 09:25:22 SkyScan query 09:25:22 SkyScan query done: ret=0 az=90.015<-6001 ze=157.35<-1510 Statuses=0009 0009 09:25:22 Msec=0 True Az=90.015 Ze=157.35 Az status=0009 Ze status=0009 09:25:23 Check angles 09:25:23 SkyScan query 09:25:23 SkyScan query done: ret=0 az=72.48<-4832 ze=136.38<-2908 Statuses=0009 0009 09:25:23 Msec=750 True Az=72.48 Ze=136.38 Az status=0009 Ze status=0009 09:25:23 Check angles 09:25:23 SkyScan query 09:25:24 SkyScan query done: ret=0 az=55.05<-3670 ze=115.47<-4302 Statuses=0009 0009 09:25:24 Msec=1500 True Az=55.05 Ze=115.47 Az status=0009 Ze status=0009 09:25:24 Check angles 09:25:24 SkyScan query 09:25:25 SkyScan query done: ret=0 az=40.98<-2732 ze=94.47<-5702 Statuses=0009 0009 09:25:25 Msec=2250 True Az=40.98 Ze=94.47 Az status=0009 Ze status=0009 09:25:25 Check angles 09:25:25 SkyScan query 09:25:25 SkyScan query done: ret=0 az=40.995<-2733 ze=73.5<-7100 Statuses=0008 0009 09:25:25 Msec=3000 True Az=40.995 Ze=73.5 Az status=0008 Ze status=0009 09:25:26 Check angles 09:25:26 SkyScan query 09:25:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 09:25:26 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 09:25:26 Check angles 09:25:26 SkyScan query 09:25:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:25:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:25:27 Message to Master queued w/err=0: serial=138097 error=0 09:25:32 Received message from Master: op=Filter serial=138098 09:25:32 Color wheel filter change from 0 to 0 09:25:32 FLIGetFilterPos err=0 currentPosition=0 09:25:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:32 Filter is already there-color wheel unchanged 09:25:32 Received message from Master: op=Shutter serial=138099 09:25:32 Shutter LASER close 09:25:32 Received message from Camera: op=State serial=138101 09:25:32 GetSingleValue result=40 Value=cccccccc 09:25:32 SkyScan query 09:25:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:25:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:33 Parameters OK 09:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:33 Set A/D data flow result=40 09:25:33 Set A/D channel type result=40 09:25:33 Set A/D encoding result=40 09:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:33 Set channel filter=0.000000e+000 result=40 09:25:33 Config A/D Result=40 09:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:33 Get A/D filter: -9.255963e+061 result=40 09:25:33 Get A/D value=-858993460 result=40 09:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:33 Parameters OK 09:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:33 Set A/D data flow result=40 09:25:33 Set A/D channel type result=40 09:25:33 Set A/D encoding result=40 09:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:33 Set channel filter=0.000000e+000 result=40 09:25:33 Config A/D Result=40 09:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:33 Get A/D filter: -9.255963e+061 result=40 09:25:33 Get A/D value=-858993460 result=40 09:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:33 Aux= [UTC 2018-12-14 09:25:33] 09:25:33 Message to Camera, serial 138101 queued 09:26:10 Received message from Master: op=PointingHead serial=138114 09:26:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:26:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:26:10 Point started: ret=0 09:26:10 point_skyscan result=0 09:26:11 Check angles 09:26:11 SkyScan query 09:26:11 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 09:26:11 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 09:26:12 Check angles 09:26:12 SkyScan query 09:26:12 SkyScan query done: ret=0 az=81.66<-5444 ze=66.495<-7567 Statuses=0009 0008 09:26:12 Msec=750 True Az=81.66 Ze=66.495 Az status=0009 Ze status=0008 09:26:12 Check angles 09:26:12 SkyScan query 09:26:13 SkyScan query done: ret=0 az=99.195<-6613 ze=66.495<-7567 Statuses=0009 0008 09:26:13 Msec=1500 True Az=99.195 Ze=66.495 Az status=0009 Ze status=0008 09:26:13 Check angles 09:26:13 SkyScan query 09:26:14 SkyScan query done: ret=0 az=116.655<-7777 ze=66.495<-7567 Statuses=0009 0008 09:26:14 Msec=2250 True Az=116.655 Ze=66.495 Az status=0009 Ze status=0008 09:26:14 Check angles 09:26:14 SkyScan query 09:26:14 SkyScan query done: ret=0 az=134.145<-8943 ze=66.495<-7567 Statuses=0009 0008 09:26:14 Msec=3000 True Az=134.145 Ze=66.495 Az status=0009 Ze status=0008 09:26:15 Check angles 09:26:15 SkyScan query 09:26:15 SkyScan query done: ret=0 az=151.59<-10106 ze=66.495<-7567 Statuses=0009 0008 09:26:15 Msec=3750 True Az=151.59 Ze=66.495 Az status=0009 Ze status=0008 09:26:15 Check angles 09:26:15 SkyScan query 09:26:16 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:26:16 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:26:16 Message to Master queued w/err=0: serial=138114 error=0 09:26:21 Received message from Master: op=Filter serial=138115 09:26:21 Color wheel filter change from 0 to 0 09:26:21 FLIGetFilterPos err=0 currentPosition=0 09:26:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:21 Filter is already there-color wheel unchanged 09:26:21 Received message from Master: op=Shutter serial=138116 09:26:21 Shutter LASER close 09:26:21 Received message from Camera: op=State serial=138118 09:26:21 GetSingleValue result=40 Value=cccccccc 09:26:21 SkyScan query 09:26:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:26:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:22 Parameters OK 09:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:22 Set A/D data flow result=40 09:26:22 Set A/D channel type result=40 09:26:22 Set A/D encoding result=40 09:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:22 Set channel filter=0.000000e+000 result=40 09:26:22 Config A/D Result=40 09:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:22 Get A/D filter: -9.255963e+061 result=40 09:26:22 Get A/D value=-858993460 result=40 09:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:22 Parameters OK 09:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:22 Set A/D data flow result=40 09:26:22 Set A/D channel type result=40 09:26:22 Set A/D encoding result=40 09:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:22 Set channel filter=0.000000e+000 result=40 09:26:22 Config A/D Result=40 09:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:22 Get A/D filter: -9.255963e+061 result=40 09:26:22 Get A/D value=-858993460 result=40 09:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:22 Aux= 09:26:22 Message to Camera, serial 138118 queued 09:26:59 Received message from Master: op=PointingHead serial=138131 09:26:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:26:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:26:59 Point started: ret=0 09:26:59 point_skyscan result=0 09:27:00 Check angles 09:27:00 SkyScan query 09:27:00 SkyScan query done: ret=0 az=134.805<-8987 ze=36.63<-9558 Statuses=0009 0009 09:27:00 Msec=0 True Az=134.805 Ze=36.63 Az status=0009 Ze status=0009 09:27:00 Check angles 09:27:00 SkyScan query 09:27:01 SkyScan query done: ret=0 az=117.09<-7806 ze=15.285<-10981 Statuses=0009 0009 09:27:01 Msec=750 True Az=117.09 Ze=15.285 Az status=0009 Ze status=0009 09:27:01 Check angles 09:27:01 SkyScan query 09:27:02 SkyScan query done: ret=0 az=99.675<-6645 ze=-5.745<-12383 Statuses=0009 0009 09:27:02 Msec=1500 True Az=99.675 Ze=-5.745 Az status=0009 Ze status=0009 09:27:02 Check angles 09:27:02 SkyScan query 09:27:03 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.715<-13781 Statuses=0009 0009 09:27:03 Msec=2250 True Az=82.2 Ze=-26.715 Az status=0009 Ze status=0009 09:27:03 Check angles 09:27:03 SkyScan query 09:27:03 SkyScan query done: ret=0 az=64.695<-4313 ze=-38.58<-14572 Statuses=0009 0008 09:27:03 Msec=3000 True Az=64.695 Ze=-38.58 Az status=0009 Ze status=0008 09:27:03 Check angles 09:27:03 SkyScan query 09:27:04 SkyScan query done: ret=0 az=47.295<-3153 ze=-38.52<-14568 Statuses=0009 0008 09:27:04 Msec=3750 True Az=47.295 Ze=-38.52 Az status=0009 Ze status=0008 09:27:04 Check angles 09:27:04 SkyScan query 09:27:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:27:05 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:27:05 Message to Master queued w/err=0: serial=138131 error=0 09:27:10 Received message from Master: op=Filter serial=138132 09:27:10 Color wheel filter change from 0 to 0 09:27:10 FLIGetFilterPos err=0 currentPosition=0 09:27:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:10 Filter is already there-color wheel unchanged 09:27:10 Received message from Master: op=Shutter serial=138133 09:27:10 Shutter LASER close 09:27:10 Received message from Camera: op=State serial=138135 09:27:10 GetSingleValue result=40 Value=cccccccc 09:27:10 SkyScan query 09:27:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:27:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:11 Parameters OK 09:27:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:11 Set A/D data flow result=40 09:27:11 Set A/D channel type result=40 09:27:11 Set A/D encoding result=40 09:27:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:11 Set channel filter=0.000000e+000 result=40 09:27:11 Config A/D Result=40 09:27:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:11 Get A/D filter: -9.255963e+061 result=40 09:27:11 Get A/D value=-858993460 result=40 09:27:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:11 Parameters OK 09:27:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:11 Set A/D data flow result=40 09:27:11 Set A/D channel type result=40 09:27:11 Set A/D encoding result=40 09:27:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:11 Set channel filter=0.000000e+000 result=40 09:27:11 Config A/D Result=40 09:27:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:11 Get A/D filter: -9.255963e+061 result=40 09:27:11 Get A/D value=-858993460 result=40 09:27:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:11 Aux= 09:27:11 Message to Camera, serial 138135 queued 09:27:47 Received message from Master: op=PointingHead serial=138147 09:27:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:27:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:27:47 Point started: ret=0 09:27:47 point_skyscan result=0 09:27:48 Check angles 09:27:48 SkyScan query 09:27:48 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.25<-16550 Statuses=0009 0009 09:27:48 Msec=0 True Az=63.9 Ze=-68.25 Az status=0009 Ze status=0009 09:27:48 Check angles 09:27:48 SkyScan query 09:27:49 SkyScan query done: ret=0 az=81.435<-5429 ze=-89.22<-17948 Statuses=0009 0009 09:27:49 Msec=750 True Az=81.435 Ze=-89.22 Az status=0009 Ze status=0009 09:27:49 Check angles 09:27:49 SkyScan query 09:27:50 SkyScan query done: ret=0 az=98.835<-6589 ze=-110.175<-19345 Statuses=0009 0009 09:27:50 Msec=1500 True Az=98.835 Ze=-110.175 Az status=0009 Ze status=0009 09:27:50 Check angles 09:27:50 SkyScan query 09:27:50 SkyScan query done: ret=0 az=116.46<-7764 ze=-131.13<-20742 Statuses=0009 0009 09:27:50 Msec=2250 True Az=116.46 Ze=-131.13 Az status=0009 Ze status=0009 09:27:51 Check angles 09:27:51 SkyScan query 09:27:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 09:27:51 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 09:27:51 Check angles 09:27:51 SkyScan query 09:27:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 09:27:52 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 09:27:52 Message to Master queued w/err=0: serial=138147 error=0 09:27:57 Received message from Master: op=Filter serial=138148 09:27:57 Color wheel filter change from 0 to 0 09:27:57 FLIGetFilterPos err=0 currentPosition=0 09:27:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:57 Filter is already there-color wheel unchanged 09:27:57 Received message from Master: op=Shutter serial=138149 09:27:57 Shutter LASER close 09:27:57 Received message from Camera: op=State serial=138151 09:27:57 GetSingleValue result=40 Value=cccccccc 09:27:57 SkyScan query 09:27:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:27:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:58 Parameters OK 09:27:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:58 Set A/D data flow result=40 09:27:58 Set A/D channel type result=40 09:27:58 Set A/D encoding result=40 09:27:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:58 Set channel filter=0.000000e+000 result=40 09:27:58 Config A/D Result=40 09:27:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:58 Get A/D filter: -9.255963e+061 result=40 09:27:58 Get A/D value=-858993460 result=40 09:27:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:58 Parameters OK 09:27:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:58 Set A/D data flow result=40 09:27:58 Set A/D channel type result=40 09:27:58 Set A/D encoding result=40 09:27:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:58 Set channel filter=0.000000e+000 result=40 09:27:58 Config A/D Result=40 09:27:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:58 Get A/D filter: -9.255963e+061 result=40 09:27:58 Get A/D value=-858993460 result=40 09:27:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:58 Aux= 09:27:58 Message to Camera, serial 138151 queued 09:28:35 Received message from Master: op=PointingHead serial=138164 09:28:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:28:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:28:35 Point started: ret=0 09:28:35 point_skyscan result=0 09:28:36 Check angles 09:28:36 SkyScan query 09:28:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 09:28:36 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 09:28:36 Check angles 09:28:36 SkyScan query 09:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:28:37 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:28:37 Message to Master queued w/err=0: serial=138164 error=0 09:28:42 Received message from Master: op=Filter serial=138165 09:28:42 Color wheel filter change from 0 to 0 09:28:42 FLIGetFilterPos err=0 currentPosition=0 09:28:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:42 Filter is already there-color wheel unchanged 09:28:42 Received message from Master: op=Shutter serial=138166 09:28:42 Shutter LASER open 09:28:42 Received message from Camera: op=State serial=138168 09:28:42 GetSingleValue result=40 Value=cccccccc 09:28:42 SkyScan query 09:28:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:28:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:43 Parameters OK 09:28:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:43 Set A/D data flow result=40 09:28:43 Set A/D channel type result=40 09:28:43 Set A/D encoding result=40 09:28:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:43 Set channel filter=0.000000e+000 result=40 09:28:43 Config A/D Result=40 09:28:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:43 Get A/D filter: -9.255963e+061 result=40 09:28:43 Get A/D value=-858993460 result=40 09:28:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:43 Parameters OK 09:28:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:43 Set A/D data flow result=40 09:28:43 Set A/D channel type result=40 09:28:43 Set A/D encoding result=40 09:28:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:43 Set channel filter=0.000000e+000 result=40 09:28:43 Config A/D Result=40 09:28:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:43 Get A/D filter: -9.255963e+061 result=40 09:28:43 Get A/D value=-858993460 result=40 09:28:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:43 Aux= 09:28:43 Message to Camera, serial 138168 queued 09:28:51 Received message from Master: op=Shutter serial=138178 09:28:51 Shutter LASER close 09:28:52 Received message from Master: op=PointingHead serial=138182 09:28:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:28:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:28:52 Point started: ret=0 09:28:52 point_skyscan result=0 09:28:53 Check angles 09:28:53 SkyScan query 09:28:54 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.845<-21523 Statuses=0009 0009 09:28:54 Msec=0 True Az=136.35 Ze=-142.845 Az status=0009 Ze status=0009 09:28:54 Check angles 09:28:54 SkyScan query 09:28:55 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.905<-20127 Statuses=0009 0009 09:28:55 Msec=750 True Az=153.78 Ze=-121.905 Az status=0009 Ze status=0009 09:28:55 Check angles 09:28:55 SkyScan query 09:28:55 SkyScan query done: ret=0 az=171.255<-11417 ze=-100.89<-18726 Statuses=0009 0009 09:28:55 Msec=1500 True Az=171.255 Ze=-100.89 Az status=0009 Ze status=0009 09:28:55 Check angles 09:28:55 SkyScan query 09:28:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.01<-17334 Statuses=0008 0009 09:28:56 Msec=2250 True Az=176.01 Ze=-80.01 Az status=0008 Ze status=0009 09:28:56 Check angles 09:28:56 SkyScan query 09:28:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.025<-15935 Statuses=0008 0009 09:28:57 Msec=3000 True Az=176.01 Ze=-59.025 Az status=0008 Ze status=0009 09:28:57 Check angles 09:28:57 SkyScan query 09:28:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 09:28:58 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 09:28:58 Message to Master queued w/err=0: serial=138182 error=0 09:29:03 Received message from Master: op=Filter serial=138183 09:29:03 Color wheel filter change from 0 to 0 09:29:03 FLIGetFilterPos err=0 currentPosition=0 09:29:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:03 Filter is already there-color wheel unchanged 09:29:03 Received message from Master: op=Shutter serial=138184 09:29:03 Shutter LASER close 09:29:03 Received message from Camera: op=State serial=138186 09:29:03 GetSingleValue result=40 Value=cccccccc 09:29:03 SkyScan query 09:29:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:29:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:03 Parameters OK 09:29:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:03 Set A/D data flow result=40 09:29:03 Set A/D channel type result=40 09:29:03 Set A/D encoding result=40 09:29:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:03 Set channel filter=0.000000e+000 result=40 09:29:03 Config A/D Result=40 09:29:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:03 Get A/D filter: -9.255963e+061 result=40 09:29:03 Get A/D value=-858993460 result=40 09:29:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:03 Parameters OK 09:29:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:03 Set A/D data flow result=40 09:29:03 Set A/D channel type result=40 09:29:03 Set A/D encoding result=40 09:29:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:03 Set channel filter=0.000000e+000 result=40 09:29:03 Config A/D Result=40 09:29:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:03 Get A/D filter: -9.255963e+061 result=40 09:29:03 Get A/D value=-858993460 result=40 09:29:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:03 Aux= 09:29:03 Message to Camera, serial 138186 queued 09:29:40 Received message from Master: op=PointingHead serial=138199 09:29:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:29:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:29:41 Point started: ret=0 09:29:41 point_skyscan result=0 09:29:41 Check angles 09:29:41 SkyScan query 09:29:42 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.975<-13465 Statuses=0009 0009 09:29:42 Msec=0 True Az=152.97 Ze=-21.975 Az status=0009 Ze status=0009 09:29:42 Check angles 09:29:42 SkyScan query 09:29:43 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.87<-12058 Statuses=0009 0009 09:29:43 Msec=750 True Az=135.57 Ze=-0.87 Az status=0009 Ze status=0009 09:29:43 Check angles 09:29:43 SkyScan query 09:29:43 SkyScan query done: ret=0 az=118.035<-7869 ze=19.965<-10669 Statuses=0009 0009 09:29:43 Msec=1500 True Az=118.035 Ze=19.965 Az status=0009 Ze status=0009 09:29:44 Check angles 09:29:44 SkyScan query 09:29:44 SkyScan query done: ret=0 az=100.62<-6708 ze=40.95<-9270 Statuses=0009 0009 09:29:44 Msec=2250 True Az=100.62 Ze=40.95 Az status=0009 Ze status=0009 09:29:44 Check angles 09:29:44 SkyScan query 09:29:45 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:29:45 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:29:45 Check angles 09:29:45 SkyScan query 09:29:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:29:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:29:46 Message to Master queued w/err=0: serial=138199 error=0 09:29:51 Received message from Master: op=Filter serial=138200 09:29:51 Color wheel filter change from 0 to 0 09:29:51 FLIGetFilterPos err=0 currentPosition=0 09:29:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:51 Filter is already there-color wheel unchanged 09:29:51 Received message from Master: op=Shutter serial=138201 09:29:51 Shutter LASER close 09:29:51 Received message from Camera: op=State serial=138203 09:29:51 GetSingleValue result=40 Value=cccccccc 09:29:51 SkyScan query 09:29:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:29:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:51 Parameters OK 09:29:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:51 Set A/D data flow result=40 09:29:51 Set A/D channel type result=40 09:29:51 Set A/D encoding result=40 09:29:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:51 Set channel filter=0.000000e+000 result=40 09:29:51 Config A/D Result=40 09:29:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:51 Get A/D filter: -9.255963e+061 result=40 09:29:51 Get A/D value=-858993460 result=40 09:29:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:51 Parameters OK 09:29:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:51 Set A/D data flow result=40 09:29:51 Set A/D channel type result=40 09:29:51 Set A/D encoding result=40 09:29:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:51 Set channel filter=0.000000e+000 result=40 09:29:51 Config A/D Result=40 09:29:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:51 Get A/D filter: -9.255963e+061 result=40 09:29:51 Get A/D value=-858993460 result=40 09:29:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:51 Aux= 09:29:51 Message to Camera, serial 138203 queued 09:30:28 Received message from Master: op=PointingHead serial=138216 09:30:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:30:28 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:30:29 Point started: ret=0 09:30:29 point_skyscan result=0 09:30:29 Check angles 09:30:29 SkyScan query 09:30:30 SkyScan query done: ret=0 az=109.44<-7296 ze=38.49<-9434 Statuses=0009 0008 09:30:30 Msec=0 True Az=109.44 Ze=38.49 Az status=0009 Ze status=0008 09:30:30 Check angles 09:30:30 SkyScan query 09:30:31 SkyScan query done: ret=0 az=126.96<-8464 ze=38.505<-9433 Statuses=0009 0008 09:30:31 Msec=750 True Az=126.96 Ze=38.505 Az status=0009 Ze status=0008 09:30:31 Check angles 09:30:31 SkyScan query 09:30:32 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 09:30:32 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 09:30:32 Check angles 09:30:32 SkyScan query 09:30:32 SkyScan query done: ret=0 az=161.925<-10795 ze=38.505<-9433 Statuses=0009 0008 09:30:32 Msec=2250 True Az=161.925 Ze=38.505 Az status=0009 Ze status=0008 09:30:32 Check angles 09:30:32 SkyScan query 09:30:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:30:33 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:30:33 Check angles 09:30:33 SkyScan query 09:30:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:30:34 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:30:34 Message to Master queued w/err=0: serial=138216 error=0 09:30:39 Received message from Master: op=Filter serial=138217 09:30:39 Color wheel filter change from 0 to 0 09:30:39 FLIGetFilterPos err=0 currentPosition=0 09:30:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:39 Filter is already there-color wheel unchanged 09:30:39 Received message from Master: op=Shutter serial=138218 09:30:39 Shutter LASER close 09:30:39 Received message from Camera: op=State serial=138220 09:30:39 GetSingleValue result=40 Value=cccccccc 09:30:39 SkyScan query 09:30:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:30:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:40 Parameters OK 09:30:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:40 Set A/D data flow result=40 09:30:40 Set A/D channel type result=40 09:30:40 Set A/D encoding result=40 09:30:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:40 Set channel filter=0.000000e+000 result=40 09:30:40 Config A/D Result=40 09:30:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:40 Get A/D filter: -9.255963e+061 result=40 09:30:40 Get A/D value=-858993460 result=40 09:30:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:40 Parameters OK 09:30:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:40 Set A/D data flow result=40 09:30:40 Set A/D channel type result=40 09:30:40 Set A/D encoding result=40 09:30:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:40 Set channel filter=0.000000e+000 result=40 09:30:40 Config A/D Result=40 09:30:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:40 Get A/D filter: -9.255963e+061 result=40 09:30:40 Get A/D value=-858993460 result=40 09:30:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:40 Aux= 09:30:40 Message to Camera, serial 138220 queued 09:31:16 Received message from Master: op=PointingHead serial=138233 09:31:16 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:31:16 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:31:17 Point started: ret=0 09:31:17 point_skyscan result=0 09:31:18 Check angles 09:31:18 SkyScan query 09:31:18 SkyScan query done: ret=0 az=152.745<-10183 ze=8.295<-11447 Statuses=0009 0009 09:31:18 Msec=0 True Az=152.745 Ze=8.295 Az status=0009 Ze status=0009 09:31:18 Check angles 09:31:18 SkyScan query 09:31:19 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.585<-12839 Statuses=0009 0009 09:31:19 Msec=750 True Az=135.24 Ze=-12.585 Az status=0009 Ze status=0009 09:31:19 Check angles 09:31:19 SkyScan query 09:31:20 SkyScan query done: ret=0 az=117.39<-7826 ze=-34.02<-14268 Statuses=0009 0009 09:31:20 Msec=1500 True Az=117.39 Ze=-34.02 Az status=0009 Ze status=0009 09:31:20 Check angles 09:31:20 SkyScan query 09:31:20 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.57<-15438 Statuses=0009 0009 09:31:20 Msec=2250 True Az=100.02 Ze=-51.57 Az status=0009 Ze status=0009 09:31:21 Check angles 09:31:21 SkyScan query 09:31:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 09:31:21 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 09:31:21 Check angles 09:31:21 SkyScan query 09:31:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:31:22 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:31:22 Message to Master queued w/err=0: serial=138233 error=0 09:31:27 Received message from Master: op=Filter serial=138234 09:31:27 Color wheel filter change from 0 to 0 09:31:27 FLIGetFilterPos err=0 currentPosition=0 09:31:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:27 Filter is already there-color wheel unchanged 09:31:27 Received message from Master: op=Shutter serial=138235 09:31:27 Shutter LASER close 09:31:27 Received message from Camera: op=State serial=138237 09:31:27 GetSingleValue result=40 Value=cccccccc 09:31:27 SkyScan query 09:31:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:31:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:28 Parameters OK 09:31:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:28 Set A/D data flow result=40 09:31:28 Set A/D channel type result=40 09:31:28 Set A/D encoding result=40 09:31:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:28 Set channel filter=0.000000e+000 result=40 09:31:28 Config A/D Result=40 09:31:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:28 Get A/D filter: -9.255963e+061 result=40 09:31:28 Get A/D value=-858993460 result=40 09:31:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:28 Parameters OK 09:31:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:28 Set A/D data flow result=40 09:31:28 Set A/D channel type result=40 09:31:28 Set A/D encoding result=40 09:31:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:28 Set channel filter=0.000000e+000 result=40 09:31:28 Config A/D Result=40 09:31:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:28 Get A/D filter: -9.255963e+061 result=40 09:31:28 Get A/D value=-858993460 result=40 09:31:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:28 Aux= 09:31:28 Message to Camera, serial 138237 queued 09:32:04 Received message from Master: op=PointingHead serial=138250 09:32:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:32:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:32:05 Point started: ret=0 09:32:05 point_skyscan result=0 09:32:06 Check angles 09:32:06 SkyScan query 09:32:06 SkyScan query done: ret=0 az=109.245<-7283 ze=-81.555<-17437 Statuses=0009 0009 09:32:06 Msec=0 True Az=109.245 Ze=-81.555 Az status=0009 Ze status=0009 09:32:06 Check angles 09:32:06 SkyScan query 09:32:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.93<-18862 Statuses=0008 0009 09:32:07 Msec=750 True Az=112.995 Ze=-102.93 Az status=0008 Ze status=0009 09:32:07 Check angles 09:32:07 SkyScan query 09:32:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 09:32:08 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 09:32:08 Check angles 09:32:08 SkyScan query 09:32:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 09:32:08 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 09:32:09 Check angles 09:32:09 SkyScan query 09:32:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.795<-23053 Statuses=0008 0009 09:32:09 Msec=3000 True Az=112.995 Ze=-165.795 Az status=0008 Ze status=0009 09:32:09 Check angles 09:32:09 SkyScan query 09:32:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 09:32:10 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 09:32:10 Message to Master queued w/err=0: serial=138250 error=0 09:32:15 Received message from Master: op=Filter serial=138251 09:32:15 Color wheel filter change from 0 to 0 09:32:15 FLIGetFilterPos err=0 currentPosition=0 09:32:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:15 Filter is already there-color wheel unchanged 09:32:15 Received message from Master: op=Shutter serial=138252 09:32:15 Shutter LASER open 09:32:15 Received message from Camera: op=State serial=138254 09:32:15 GetSingleValue result=40 Value=cccccccc 09:32:15 SkyScan query 09:32:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:32:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:16 Parameters OK 09:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:16 Set A/D data flow result=40 09:32:16 Set A/D channel type result=40 09:32:16 Set A/D encoding result=40 09:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:16 Set channel filter=0.000000e+000 result=40 09:32:16 Config A/D Result=40 09:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:16 Get A/D filter: -9.255963e+061 result=40 09:32:16 Get A/D value=-858993460 result=40 09:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:16 Parameters OK 09:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:16 Set A/D data flow result=40 09:32:16 Set A/D channel type result=40 09:32:16 Set A/D encoding result=40 09:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:16 Set channel filter=0.000000e+000 result=40 09:32:16 Config A/D Result=40 09:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:16 Get A/D filter: -9.255963e+061 result=40 09:32:16 Get A/D value=-858993460 result=40 09:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:16 Aux= 09:32:16 Message to Camera, serial 138254 queued 09:32:24 Received message from Master: op=Shutter serial=138264 09:32:24 Shutter LASER close 09:32:25 Received message from Master: op=PointingHead serial=138268 09:32:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:32:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:32:25 Point started: ret=0 09:32:25 point_skyscan result=0 09:32:26 Check angles 09:32:26 SkyScan query 09:32:26 SkyScan query done: ret=0 az=90.045<-6003 ze=157.38<-1508 Statuses=0009 0009 09:32:26 Msec=0 True Az=90.045 Ze=157.38 Az status=0009 Ze status=0009 09:32:27 Check angles 09:32:27 SkyScan query 09:32:27 SkyScan query done: ret=0 az=72.525<-4835 ze=136.38<-2908 Statuses=0009 0009 09:32:27 Msec=750 True Az=72.525 Ze=136.38 Az status=0009 Ze status=0009 09:32:27 Check angles 09:32:27 SkyScan query 09:32:28 SkyScan query done: ret=0 az=55.11<-3674 ze=115.485<-4301 Statuses=0009 0009 09:32:28 Msec=1500 True Az=55.11 Ze=115.485 Az status=0009 Ze status=0009 09:32:28 Check angles 09:32:28 SkyScan query 09:32:29 SkyScan query done: ret=0 az=40.965<-2731 ze=94.485<-5701 Statuses=0009 0009 09:32:29 Msec=2250 True Az=40.965 Ze=94.485 Az status=0009 Ze status=0009 09:32:29 Check angles 09:32:29 SkyScan query 09:32:29 SkyScan query done: ret=0 az=40.995<-2733 ze=73.56<-7096 Statuses=0008 0009 09:32:29 Msec=3000 True Az=40.995 Ze=73.56 Az status=0008 Ze status=0009 09:32:30 Check angles 09:32:30 SkyScan query 09:32:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.935<-8471 Statuses=0008 0009 09:32:30 Msec=3750 True Az=40.995 Ze=52.935 Az status=0008 Ze status=0009 09:32:30 Check angles 09:32:30 SkyScan query 09:32:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:32:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:32:31 Message to Master queued w/err=0: serial=138268 error=0 09:32:36 Received message from Master: op=Filter serial=138269 09:32:36 Color wheel filter change from 0 to 0 09:32:36 FLIGetFilterPos err=0 currentPosition=0 09:32:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:36 Filter is already there-color wheel unchanged 09:32:36 Received message from Master: op=Shutter serial=138270 09:32:36 Shutter LASER close 09:32:36 Received message from Camera: op=State serial=138272 09:32:36 GetSingleValue result=40 Value=cccccccc 09:32:36 SkyScan query 09:32:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:32:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:37 Parameters OK 09:32:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:37 Set A/D data flow result=40 09:32:37 Set A/D channel type result=40 09:32:37 Set A/D encoding result=40 09:32:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:37 Set channel filter=0.000000e+000 result=40 09:32:37 Config A/D Result=40 09:32:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:37 Get A/D filter: -9.255963e+061 result=40 09:32:37 Get A/D value=-858993460 result=40 09:32:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:37 Parameters OK 09:32:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:37 Set A/D data flow result=40 09:32:37 Set A/D channel type result=40 09:32:37 Set A/D encoding result=40 09:32:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:37 Set channel filter=0.000000e+000 result=40 09:32:37 Config A/D Result=40 09:32:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:37 Get A/D filter: -9.255963e+061 result=40 09:32:37 Get A/D value=-858993460 result=40 09:32:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:37 Aux= 09:32:37 Message to Camera, serial 138272 queued 09:33:14 Received message from Master: op=PointingHead serial=138285 09:33:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:33:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:33:14 Point started: ret=0 09:33:14 point_skyscan result=0 09:33:15 Check angles 09:33:15 SkyScan query 09:33:15 SkyScan query done: ret=0 az=63.885<-4259 ze=66.54<-7564 Statuses=0009 0008 09:33:15 Msec=0 True Az=63.885 Ze=66.54 Az status=0009 Ze status=0008 09:33:16 Check angles 09:33:16 SkyScan query 09:33:16 SkyScan query done: ret=0 az=81.42<-5428 ze=66.51<-7566 Statuses=0009 0008 09:33:16 Msec=750 True Az=81.42 Ze=66.51 Az status=0009 Ze status=0008 09:33:16 Check angles 09:33:16 SkyScan query 09:33:17 SkyScan query done: ret=0 az=98.88<-6592 ze=66.495<-7567 Statuses=0009 0008 09:33:17 Msec=1500 True Az=98.88 Ze=66.495 Az status=0009 Ze status=0008 09:33:17 Check angles 09:33:17 SkyScan query 09:33:18 SkyScan query done: ret=0 az=116.415<-7761 ze=66.495<-7567 Statuses=0009 0008 09:33:18 Msec=2250 True Az=116.415 Ze=66.495 Az status=0009 Ze status=0008 09:33:18 Check angles 09:33:18 SkyScan query 09:33:18 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 09:33:18 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 09:33:19 Check angles 09:33:19 SkyScan query 09:33:19 SkyScan query done: ret=0 az=151.215<-10081 ze=66.495<-7567 Statuses=0009 0008 09:33:19 Msec=3750 True Az=151.215 Ze=66.495 Az status=0009 Ze status=0008 09:33:19 Check angles 09:33:19 SkyScan query 09:33:20 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:33:20 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:33:20 Message to Master queued w/err=0: serial=138285 error=0 09:33:25 Received message from Master: op=Filter serial=138286 09:33:25 Color wheel filter change from 0 to 0 09:33:25 FLIGetFilterPos err=0 currentPosition=0 09:33:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:25 Filter is already there-color wheel unchanged 09:33:25 Received message from Master: op=Shutter serial=138287 09:33:25 Shutter LASER close 09:33:25 Received message from Camera: op=State serial=138289 09:33:25 GetSingleValue result=40 Value=cccccccc 09:33:25 SkyScan query 09:33:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:33:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:26 Parameters OK 09:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:26 Set A/D data flow result=40 09:33:26 Set A/D channel type result=40 09:33:26 Set A/D encoding result=40 09:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:26 Set channel filter=0.000000e+000 result=40 09:33:26 Config A/D Result=40 09:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:26 Get A/D filter: -9.255963e+061 result=40 09:33:26 Get A/D value=-858993460 result=40 09:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:26 Parameters OK 09:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:26 Set A/D data flow result=40 09:33:26 Set A/D channel type result=40 09:33:26 Set A/D encoding result=40 09:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:26 Set channel filter=0.000000e+000 result=40 09:33:26 Config A/D Result=40 09:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:26 Get A/D filter: -9.255963e+061 result=40 09:33:26 Get A/D value=-858993460 result=40 09:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:26 Aux= 09:33:26 Message to Camera, serial 138289 queued 09:34:03 Received message from Master: op=PointingHead serial=138302 09:34:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:34:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:34:03 Point started: ret=0 09:34:03 point_skyscan result=0 09:34:04 Check angles 09:34:04 SkyScan query 09:34:04 SkyScan query done: ret=0 az=134.97<-8998 ze=36.72<-9552 Statuses=0009 0009 09:34:04 Msec=0 True Az=134.97 Ze=36.72 Az status=0009 Ze status=0009 09:34:04 Check angles 09:34:04 SkyScan query 09:34:05 SkyScan query done: ret=0 az=117.525<-7835 ze=15.81<-10946 Statuses=0009 0009 09:34:05 Msec=750 True Az=117.525 Ze=15.81 Az status=0009 Ze status=0009 09:34:05 Check angles 09:34:05 SkyScan query 09:34:06 SkyScan query done: ret=0 az=99.765<-6651 ze=-5.61<-12374 Statuses=0009 0009 09:34:06 Msec=1500 True Az=99.765 Ze=-5.61 Az status=0009 Ze status=0009 09:34:06 Check angles 09:34:06 SkyScan query 09:34:06 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.58<-13772 Statuses=0009 0009 09:34:06 Msec=2250 True Az=82.26 Ze=-26.58 Az status=0009 Ze status=0009 09:34:07 Check angles 09:34:07 SkyScan query 09:34:07 SkyScan query done: ret=0 az=64.665<-4311 ze=-38.58<-14572 Statuses=0009 0008 09:34:07 Msec=3000 True Az=64.665 Ze=-38.58 Az status=0009 Ze status=0008 09:34:07 Check angles 09:34:07 SkyScan query 09:34:08 SkyScan query done: ret=0 az=46.83<-3122 ze=-38.52<-14568 Statuses=0009 0008 09:34:08 Msec=3750 True Az=46.83 Ze=-38.52 Az status=0009 Ze status=0008 09:34:08 Check angles 09:34:08 SkyScan query 09:34:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:34:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:34:09 Message to Master queued w/err=0: serial=138302 error=0 09:34:14 Received message from Master: op=Filter serial=138303 09:34:14 Color wheel filter change from 0 to 0 09:34:14 FLIGetFilterPos err=0 currentPosition=0 09:34:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:14 Filter is already there-color wheel unchanged 09:34:14 Received message from Master: op=Shutter serial=138304 09:34:14 Shutter LASER close 09:34:14 Received message from Camera: op=State serial=138306 09:34:14 GetSingleValue result=40 Value=cccccccc 09:34:14 SkyScan query 09:34:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:34:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:15 Parameters OK 09:34:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:15 Set A/D data flow result=40 09:34:15 Set A/D channel type result=40 09:34:15 Set A/D encoding result=40 09:34:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:15 Set channel filter=0.000000e+000 result=40 09:34:15 Config A/D Result=40 09:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:15 Get A/D filter: -9.255963e+061 result=40 09:34:15 Get A/D value=-858993460 result=40 09:34:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:15 Parameters OK 09:34:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:15 Set A/D data flow result=40 09:34:15 Set A/D channel type result=40 09:34:15 Set A/D encoding result=40 09:34:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:15 Set channel filter=0.000000e+000 result=40 09:34:15 Config A/D Result=40 09:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:15 Get A/D filter: -9.255963e+061 result=40 09:34:15 Get A/D value=-858993460 result=40 09:34:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:15 Aux= 09:34:15 Message to Camera, serial 138306 queued 09:34:51 Received message from Master: op=PointingHead serial=138319 09:34:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:34:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:34:52 Point started: ret=0 09:34:52 point_skyscan result=0 09:34:52 Check angles 09:34:52 SkyScan query 09:34:53 SkyScan query done: ret=0 az=64.35<-4290 ze=-68.67<-16578 Statuses=0009 0009 09:34:53 Msec=0 True Az=64.35 Ze=-68.67 Az status=0009 Ze status=0009 09:34:53 Check angles 09:34:53 SkyScan query 09:34:54 SkyScan query done: ret=0 az=82.26<-5484 ze=-90.045<-18003 Statuses=0009 0009 09:34:54 Msec=750 True Az=82.26 Ze=-90.045 Az status=0009 Ze status=0009 09:34:54 Check angles 09:34:54 SkyScan query 09:34:55 SkyScan query done: ret=0 az=99.72<-6648 ze=-111.015<-19401 Statuses=0009 0009 09:34:55 Msec=1500 True Az=99.72 Ze=-111.015 Az status=0009 Ze status=0009 09:34:55 Check angles 09:34:55 SkyScan query 09:34:55 SkyScan query done: ret=0 az=117.18<-7812 ze=-131.94<-20796 Statuses=0009 0009 09:34:55 Msec=2250 True Az=117.18 Ze=-131.94 Az status=0009 Ze status=0009 09:34:56 Check angles 09:34:56 SkyScan query 09:34:56 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 09:34:56 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 09:34:56 Check angles 09:34:56 SkyScan query 09:34:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 09:34:57 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 09:34:57 Message to Master queued w/err=0: serial=138319 error=0 09:35:02 Received message from Master: op=Filter serial=138320 09:35:02 Color wheel filter change from 0 to 0 09:35:02 FLIGetFilterPos err=0 currentPosition=0 09:35:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:02 Filter is already there-color wheel unchanged 09:35:02 Received message from Master: op=Shutter serial=138321 09:35:02 Shutter LASER close 09:35:02 Received message from Camera: op=State serial=138323 09:35:02 GetSingleValue result=40 Value=cccccccc 09:35:02 SkyScan query 09:35:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:35:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:03 Parameters OK 09:35:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:03 Set A/D data flow result=40 09:35:03 Set A/D channel type result=40 09:35:03 Set A/D encoding result=40 09:35:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:03 Set channel filter=0.000000e+000 result=40 09:35:03 Config A/D Result=40 09:35:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:03 Get A/D filter: -9.255963e+061 result=40 09:35:03 Get A/D value=-858993460 result=40 09:35:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:03 Parameters OK 09:35:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:03 Set A/D data flow result=40 09:35:03 Set A/D channel type result=40 09:35:03 Set A/D encoding result=40 09:35:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:03 Set channel filter=0.000000e+000 result=40 09:35:03 Config A/D Result=40 09:35:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:03 Get A/D filter: -9.255963e+061 result=40 09:35:03 Get A/D value=-858993460 result=40 09:35:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:03 Aux= 09:35:03 Message to Camera, serial 138323 queued 09:35:39 Received message from Master: op=PointingHead serial=138336 09:35:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:35:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:35:40 Point started: ret=0 09:35:40 point_skyscan result=0 09:35:41 Check angles 09:35:41 SkyScan query 09:35:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0009 0009 09:35:41 Msec=0 True Az=112.995 Ze=-171.495 Az status=0009 Ze status=0009 09:35:41 Check angles 09:35:41 SkyScan query 09:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:35:42 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:35:42 Message to Master queued w/err=0: serial=138336 error=0 09:35:47 Received message from Master: op=Filter serial=138337 09:35:47 Color wheel filter change from 0 to 0 09:35:47 FLIGetFilterPos err=0 currentPosition=0 09:35:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:47 Filter is already there-color wheel unchanged 09:35:47 Received message from Master: op=Shutter serial=138338 09:35:47 Shutter LASER open 09:35:47 Received message from Camera: op=State serial=138340 09:35:47 GetSingleValue result=40 Value=cccccccc 09:35:47 SkyScan query 09:35:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:35:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:48 Parameters OK 09:35:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:48 Set A/D data flow result=40 09:35:48 Set A/D channel type result=40 09:35:48 Set A/D encoding result=40 09:35:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:48 Set channel filter=0.000000e+000 result=40 09:35:48 Config A/D Result=40 09:35:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:48 Get A/D filter: -9.255963e+061 result=40 09:35:48 Get A/D value=-858993460 result=40 09:35:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:48 Parameters OK 09:35:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:48 Set A/D data flow result=40 09:35:48 Set A/D channel type result=40 09:35:48 Set A/D encoding result=40 09:35:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:48 Set channel filter=0.000000e+000 result=40 09:35:48 Config A/D Result=40 09:35:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:48 Get A/D filter: -9.255963e+061 result=40 09:35:48 Get A/D value=-858993460 result=40 09:35:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:48 Aux= 09:35:48 Message to Camera, serial 138340 queued [UTC 2018-12-14 09:35:52] 09:35:56 Received message from Master: op=Shutter serial=138350 09:35:56 Shutter LASER close 09:35:57 Received message from Master: op=PointingHead serial=138354 09:35:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:35:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:35:57 Point started: ret=0 09:35:57 point_skyscan result=0 09:35:58 Check angles 09:35:58 SkyScan query 09:35:59 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.415<-21561 Statuses=0009 0009 09:35:59 Msec=0 True Az=135.81 Ze=-143.415 Az status=0009 Ze status=0009 09:35:59 Check angles 09:35:59 SkyScan query 09:35:59 SkyScan query done: ret=0 az=153.33<-10222 ze=-122.46<-20164 Statuses=0009 0009 09:35:59 Msec=750 True Az=153.33 Ze=-122.46 Az status=0009 Ze status=0009 09:35:59 Check angles 09:35:59 SkyScan query 09:36:00 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.055<-18737 Statuses=0009 0009 09:36:00 Msec=1500 True Az=171.225 Ze=-101.055 Az status=0009 Ze status=0009 09:36:00 Check angles 09:36:00 SkyScan query 09:36:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.145<-17343 Statuses=0008 0009 09:36:01 Msec=2250 True Az=176.01 Ze=-80.145 Az status=0008 Ze status=0009 09:36:01 Check angles 09:36:01 SkyScan query 09:36:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.19<-15946 Statuses=0008 0009 09:36:02 Msec=3000 True Az=176.01 Ze=-59.19 Az status=0008 Ze status=0009 09:36:02 Check angles 09:36:02 SkyScan query 09:36:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:36:02 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:36:02 Message to Master queued w/err=0: serial=138354 error=0 09:36:07 Received message from Master: op=Filter serial=138355 09:36:07 Color wheel filter change from 0 to 0 09:36:07 FLIGetFilterPos err=0 currentPosition=0 09:36:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:07 Filter is already there-color wheel unchanged 09:36:08 Received message from Master: op=Shutter serial=138356 09:36:08 Shutter LASER close 09:36:08 Received message from Camera: op=State serial=138358 09:36:08 GetSingleValue result=40 Value=cccccccc 09:36:08 SkyScan query 09:36:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:36:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:08 Parameters OK 09:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:08 Set A/D data flow result=40 09:36:08 Set A/D channel type result=40 09:36:08 Set A/D encoding result=40 09:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:08 Set channel filter=0.000000e+000 result=40 09:36:08 Config A/D Result=40 09:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:08 Get A/D filter: -9.255963e+061 result=40 09:36:08 Get A/D value=-858993460 result=40 09:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:08 Parameters OK 09:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:08 Set A/D data flow result=40 09:36:08 Set A/D channel type result=40 09:36:08 Set A/D encoding result=40 09:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:08 Set channel filter=0.000000e+000 result=40 09:36:08 Config A/D Result=40 09:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:08 Get A/D filter: -9.255963e+061 result=40 09:36:08 Get A/D value=-858993460 result=40 09:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:08 Aux= 09:36:08 Message to Camera, serial 138358 queued 09:36:45 Received message from Master: op=PointingHead serial=138371 09:36:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:36:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:36:46 Point started: ret=0 09:36:46 point_skyscan result=0 09:36:46 Check angles 09:36:46 SkyScan query 09:36:47 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.375<-13425 Statuses=0009 0009 09:36:47 Msec=0 True Az=152.73 Ze=-21.375 Az status=0009 Ze status=0009 09:36:47 Check angles 09:36:47 SkyScan query 09:36:48 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.405<-12027 Statuses=0009 0009 09:36:48 Msec=750 True Az=135.15 Ze=-0.405 Az status=0009 Ze status=0009 09:36:48 Check angles 09:36:48 SkyScan query 09:36:48 SkyScan query done: ret=0 az=117.63<-7842 ze=20.535<-10631 Statuses=0009 0009 09:36:48 Msec=1500 True Az=117.63 Ze=20.535 Az status=0009 Ze status=0009 09:36:49 Check angles 09:36:49 SkyScan query 09:36:49 SkyScan query done: ret=0 az=100.26<-6684 ze=41.52<-9232 Statuses=0009 0009 09:36:49 Msec=2250 True Az=100.26 Ze=41.52 Az status=0009 Ze status=0009 09:36:49 Check angles 09:36:49 SkyScan query 09:36:50 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:36:50 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:36:50 Check angles 09:36:50 SkyScan query 09:36:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:36:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:36:51 Message to Master queued w/err=0: serial=138371 error=0 09:36:56 Received message from Master: op=Filter serial=138372 09:36:56 Color wheel filter change from 0 to 0 09:36:56 FLIGetFilterPos err=0 currentPosition=0 09:36:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:56 Filter is already there-color wheel unchanged 09:36:56 Received message from Master: op=Shutter serial=138373 09:36:56 Shutter LASER close 09:36:56 Received message from Camera: op=State serial=138375 09:36:56 GetSingleValue result=40 Value=cccccccc 09:36:56 SkyScan query 09:36:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:36:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:56 Parameters OK 09:36:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:56 Set A/D data flow result=40 09:36:56 Set A/D channel type result=40 09:36:56 Set A/D encoding result=40 09:36:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:56 Set channel filter=0.000000e+000 result=40 09:36:56 Config A/D Result=40 09:36:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:56 Get A/D filter: -9.255963e+061 result=40 09:36:56 Get A/D value=-858993460 result=40 09:36:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:56 Parameters OK 09:36:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:56 Set A/D data flow result=40 09:36:56 Set A/D channel type result=40 09:36:56 Set A/D encoding result=40 09:36:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:56 Set channel filter=0.000000e+000 result=40 09:36:56 Config A/D Result=40 09:36:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:56 Get A/D filter: -9.255963e+061 result=40 09:36:56 Get A/D value=-858993460 result=40 09:36:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:56 Aux= 09:36:56 Message to Camera, serial 138375 queued 09:37:33 Received message from Master: op=PointingHead serial=138388 09:37:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:37:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:37:34 Point started: ret=0 09:37:34 point_skyscan result=0 09:37:34 Check angles 09:37:34 SkyScan query 09:37:35 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 09:37:35 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 09:37:35 Check angles 09:37:35 SkyScan query 09:37:36 SkyScan query done: ret=0 az=126.945<-8463 ze=38.505<-9433 Statuses=0009 0008 09:37:36 Msec=750 True Az=126.945 Ze=38.505 Az status=0009 Ze status=0008 09:37:36 Check angles 09:37:36 SkyScan query 09:37:36 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 09:37:36 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 09:37:37 Check angles 09:37:37 SkyScan query 09:37:37 SkyScan query done: ret=0 az=162.345<-10823 ze=38.505<-9433 Statuses=0009 0008 09:37:37 Msec=2250 True Az=162.345 Ze=38.505 Az status=0009 Ze status=0008 09:37:37 Check angles 09:37:37 SkyScan query 09:37:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 09:37:38 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 09:37:38 Check angles 09:37:38 SkyScan query 09:37:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:37:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:37:39 Message to Master queued w/err=0: serial=138388 error=0 09:37:44 Received message from Master: op=Filter serial=138389 09:37:44 Color wheel filter change from 0 to 0 09:37:44 FLIGetFilterPos err=0 currentPosition=0 09:37:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:44 Filter is already there-color wheel unchanged 09:37:44 Received message from Master: op=Shutter serial=138390 09:37:44 Shutter LASER close 09:37:44 Received message from Camera: op=State serial=138392 09:37:44 GetSingleValue result=40 Value=cccccccc 09:37:44 SkyScan query 09:37:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:37:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:45 Parameters OK 09:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:45 Set A/D data flow result=40 09:37:45 Set A/D channel type result=40 09:37:45 Set A/D encoding result=40 09:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:45 Set channel filter=0.000000e+000 result=40 09:37:45 Config A/D Result=40 09:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:45 Get A/D filter: -9.255963e+061 result=40 09:37:45 Get A/D value=-858993460 result=40 09:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:45 Parameters OK 09:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:45 Set A/D data flow result=40 09:37:45 Set A/D channel type result=40 09:37:45 Set A/D encoding result=40 09:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:45 Set channel filter=0.000000e+000 result=40 09:37:45 Config A/D Result=40 09:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:45 Get A/D filter: -9.255963e+061 result=40 09:37:45 Get A/D value=-858993460 result=40 09:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:45 Aux= 09:37:45 Message to Camera, serial 138392 queued 09:38:21 Received message from Master: op=PointingHead serial=138405 09:38:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:38:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:38:22 Point started: ret=0 09:38:22 point_skyscan result=0 09:38:22 Check angles 09:38:22 SkyScan query 09:38:23 SkyScan query done: ret=0 az=152.895<-10193 ze=8.4<-11440 Statuses=0009 0009 09:38:23 Msec=0 True Az=152.895 Ze=8.4 Az status=0009 Ze status=0009 09:38:23 Check angles 09:38:23 SkyScan query 09:38:24 SkyScan query done: ret=0 az=134.955<-8997 ze=-12.99<-12866 Statuses=0009 0009 09:38:24 Msec=750 True Az=134.955 Ze=-12.99 Az status=0009 Ze status=0009 09:38:24 Check angles 09:38:24 SkyScan query 09:38:25 SkyScan query done: ret=0 az=117.465<-7831 ze=-33.975<-14265 Statuses=0009 0009 09:38:25 Msec=1500 True Az=117.465 Ze=-33.975 Az status=0009 Ze status=0009 09:38:25 Check angles 09:38:25 SkyScan query 09:38:25 SkyScan query done: ret=0 az=99.72<-6648 ze=-51.57<-15438 Statuses=0009 0009 09:38:25 Msec=2250 True Az=99.72 Ze=-51.57 Az status=0009 Ze status=0009 09:38:26 Check angles 09:38:26 SkyScan query 09:38:26 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 09:38:26 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 09:38:26 Check angles 09:38:26 SkyScan query 09:38:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:38:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:38:27 Message to Master queued w/err=0: serial=138405 error=0 09:38:32 Received message from Master: op=Filter serial=138406 09:38:32 Color wheel filter change from 0 to 0 09:38:32 FLIGetFilterPos err=0 currentPosition=0 09:38:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:32 Filter is already there-color wheel unchanged 09:38:32 Received message from Master: op=Shutter serial=138407 09:38:32 Shutter LASER close 09:38:32 Received message from Camera: op=State serial=138409 09:38:32 GetSingleValue result=40 Value=cccccccc 09:38:32 SkyScan query 09:38:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:38:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:33 Parameters OK 09:38:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:33 Set A/D data flow result=40 09:38:33 Set A/D channel type result=40 09:38:33 Set A/D encoding result=40 09:38:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:33 Set channel filter=0.000000e+000 result=40 09:38:33 Config A/D Result=40 09:38:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:33 Get A/D filter: -9.255963e+061 result=40 09:38:33 Get A/D value=-858993460 result=40 09:38:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:33 Parameters OK 09:38:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:33 Set A/D data flow result=40 09:38:33 Set A/D channel type result=40 09:38:33 Set A/D encoding result=40 09:38:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:33 Set channel filter=0.000000e+000 result=40 09:38:33 Config A/D Result=40 09:38:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:33 Get A/D filter: -9.255963e+061 result=40 09:38:33 Get A/D value=-858993460 result=40 09:38:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:33 Aux= 09:38:33 Message to Camera, serial 138409 queued 09:39:09 Received message from Master: op=PointingHead serial=138422 09:39:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:39:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:39:10 Point started: ret=0 09:39:10 point_skyscan result=0 09:39:11 Check angles 09:39:11 SkyScan query 09:39:11 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.63<-17442 Statuses=0009 0009 09:39:11 Msec=0 True Az=109.335 Ze=-81.63 Az status=0009 Ze status=0009 09:39:11 Check angles 09:39:11 SkyScan query 09:39:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.99<-18866 Statuses=0008 0009 09:39:12 Msec=750 True Az=112.995 Ze=-102.99 Az status=0008 Ze status=0009 09:39:12 Check angles 09:39:12 SkyScan query 09:39:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.02<-20268 Statuses=0008 0009 09:39:13 Msec=1500 True Az=112.995 Ze=-124.02 Az status=0008 Ze status=0009 09:39:13 Check angles 09:39:13 SkyScan query 09:39:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.885<-21659 Statuses=0008 0009 09:39:13 Msec=2250 True Az=112.995 Ze=-144.885 Az status=0008 Ze status=0009 09:39:14 Check angles 09:39:14 SkyScan query 09:39:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.275<-23085 Statuses=0008 0009 09:39:14 Msec=3000 True Az=112.995 Ze=-166.275 Az status=0008 Ze status=0009 09:39:14 Check angles 09:39:14 SkyScan query 09:39:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:39:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:39:15 Message to Master queued w/err=0: serial=138422 error=0 09:39:20 Received message from Master: op=Filter serial=138423 09:39:20 Color wheel filter change from 0 to 0 09:39:20 FLIGetFilterPos err=0 currentPosition=0 09:39:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:20 Filter is already there-color wheel unchanged 09:39:20 Received message from Master: op=Shutter serial=138424 09:39:20 Shutter LASER open 09:39:20 Received message from Camera: op=State serial=138426 09:39:20 GetSingleValue result=40 Value=cccccccc 09:39:20 SkyScan query 09:39:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:39:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:21 Parameters OK 09:39:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:21 Set A/D data flow result=40 09:39:21 Set A/D channel type result=40 09:39:21 Set A/D encoding result=40 09:39:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:21 Set channel filter=0.000000e+000 result=40 09:39:21 Config A/D Result=40 09:39:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:21 Get A/D filter: -9.255963e+061 result=40 09:39:21 Get A/D value=-858993460 result=40 09:39:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:21 Parameters OK 09:39:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:21 Set A/D data flow result=40 09:39:21 Set A/D channel type result=40 09:39:21 Set A/D encoding result=40 09:39:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:21 Set channel filter=0.000000e+000 result=40 09:39:21 Config A/D Result=40 09:39:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:21 Get A/D filter: -9.255963e+061 result=40 09:39:21 Get A/D value=-858993460 result=40 09:39:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:21 Aux= 09:39:21 Message to Camera, serial 138426 queued 09:39:29 Received message from Master: op=Shutter serial=138436 09:39:29 Shutter LASER close 09:39:30 Received message from Master: op=PointingHead serial=138440 09:39:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:39:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:39:30 Point started: ret=0 09:39:30 point_skyscan result=0 09:39:31 Check angles 09:39:31 SkyScan query 09:39:31 SkyScan query done: ret=0 az=90.045<-6003 ze=157.41<-1506 Statuses=0009 0009 09:39:31 Msec=0 True Az=90.045 Ze=157.41 Az status=0009 Ze status=0009 09:39:32 Check angles 09:39:32 SkyScan query 09:39:32 SkyScan query done: ret=0 az=72.21<-4814 ze=136.035<-2931 Statuses=0009 0009 09:39:32 Msec=750 True Az=72.21 Ze=136.035 Az status=0009 Ze status=0009 09:39:32 Check angles 09:39:32 SkyScan query 09:39:33 SkyScan query done: ret=0 az=54.285<-3619 ze=114.6<-4360 Statuses=0009 0009 09:39:33 Msec=1500 True Az=54.285 Ze=114.6 Az status=0009 Ze status=0009 09:39:33 Check angles 09:39:33 SkyScan query 09:39:34 SkyScan query done: ret=0 az=40.995<-2733 ze=93.24<-5784 Statuses=0009 0009 09:39:34 Msec=2250 True Az=40.995 Ze=93.24 Az status=0009 Ze status=0009 09:39:34 Check angles 09:39:34 SkyScan query 09:39:34 SkyScan query done: ret=0 az=40.995<-2733 ze=72.255<-7183 Statuses=0008 0009 09:39:34 Msec=3000 True Az=40.995 Ze=72.255 Az status=0008 Ze status=0009 09:39:35 Check angles 09:39:35 SkyScan query 09:39:35 SkyScan query done: ret=0 az=40.995<-2733 ze=52.17<-8522 Statuses=0008 0009 09:39:35 Msec=3750 True Az=40.995 Ze=52.17 Az status=0008 Ze status=0009 09:39:35 Check angles 09:39:35 SkyScan query 09:39:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:39:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:39:36 Message to Master queued w/err=0: serial=138440 error=0 09:39:41 Received message from Master: op=Filter serial=138441 09:39:41 Color wheel filter change from 0 to 0 09:39:41 FLIGetFilterPos err=0 currentPosition=0 09:39:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:41 Filter is already there-color wheel unchanged 09:39:41 Received message from Master: op=Shutter serial=138442 09:39:41 Shutter LASER close 09:39:41 Received message from Camera: op=State serial=138444 09:39:41 GetSingleValue result=40 Value=cccccccc 09:39:41 SkyScan query 09:39:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:39:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:42 Parameters OK 09:39:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:42 Set A/D data flow result=40 09:39:42 Set A/D channel type result=40 09:39:42 Set A/D encoding result=40 09:39:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:42 Set channel filter=0.000000e+000 result=40 09:39:42 Config A/D Result=40 09:39:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:42 Get A/D filter: -9.255963e+061 result=40 09:39:42 Get A/D value=-858993460 result=40 09:39:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:42 Parameters OK 09:39:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:42 Set A/D data flow result=40 09:39:42 Set A/D channel type result=40 09:39:42 Set A/D encoding result=40 09:39:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:42 Set channel filter=0.000000e+000 result=40 09:39:42 Config A/D Result=40 09:39:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:42 Get A/D filter: -9.255963e+061 result=40 09:39:42 Get A/D value=-858993460 result=40 09:39:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:42 Aux= 09:39:42 Message to Camera, serial 138444 queued 09:40:19 Received message from Master: op=PointingHead serial=138457 09:40:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:40:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:40:19 Point started: ret=0 09:40:19 point_skyscan result=0 09:40:20 Check angles 09:40:20 SkyScan query 09:40:20 SkyScan query done: ret=0 az=63.93<-4262 ze=66.54<-7564 Statuses=0009 0008 09:40:20 Msec=0 True Az=63.93 Ze=66.54 Az status=0009 Ze status=0008 09:40:21 Check angles 09:40:21 SkyScan query 09:40:21 SkyScan query done: ret=0 az=81.555<-5437 ze=66.51<-7566 Statuses=0009 0008 09:40:21 Msec=750 True Az=81.555 Ze=66.51 Az status=0009 Ze status=0008 09:40:21 Check angles 09:40:21 SkyScan query 09:40:22 SkyScan query done: ret=0 az=98.94<-6596 ze=66.495<-7567 Statuses=0009 0008 09:40:22 Msec=1500 True Az=98.94 Ze=66.495 Az status=0009 Ze status=0008 09:40:22 Check angles 09:40:22 SkyScan query 09:40:23 SkyScan query done: ret=0 az=116.4<-7760 ze=66.495<-7567 Statuses=0009 0008 09:40:23 Msec=2250 True Az=116.4 Ze=66.495 Az status=0009 Ze status=0008 09:40:23 Check angles 09:40:23 SkyScan query 09:40:23 SkyScan query done: ret=0 az=133.86<-8924 ze=66.495<-7567 Statuses=0009 0008 09:40:23 Msec=3000 True Az=133.86 Ze=66.495 Az status=0009 Ze status=0008 09:40:24 Check angles 09:40:24 SkyScan query 09:40:24 SkyScan query done: ret=0 az=151.275<-10085 ze=66.495<-7567 Statuses=0009 0008 09:40:24 Msec=3750 True Az=151.275 Ze=66.495 Az status=0009 Ze status=0008 09:40:24 Check angles 09:40:24 SkyScan query 09:40:25 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:40:25 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:40:25 Message to Master queued w/err=0: serial=138457 error=0 09:40:30 Received message from Master: op=Filter serial=138458 09:40:30 Color wheel filter change from 0 to 0 09:40:30 FLIGetFilterPos err=0 currentPosition=0 09:40:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:30 Filter is already there-color wheel unchanged 09:40:30 Received message from Master: op=Shutter serial=138459 09:40:30 Shutter LASER close 09:40:30 Received message from Camera: op=State serial=138461 09:40:30 GetSingleValue result=40 Value=cccccccc 09:40:30 SkyScan query 09:40:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:40:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:31 Parameters OK 09:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:31 Set A/D data flow result=40 09:40:31 Set A/D channel type result=40 09:40:31 Set A/D encoding result=40 09:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:31 Set channel filter=0.000000e+000 result=40 09:40:31 Config A/D Result=40 09:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:31 Get A/D filter: -9.255963e+061 result=40 09:40:31 Get A/D value=-858993460 result=40 09:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:31 Parameters OK 09:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:31 Set A/D data flow result=40 09:40:31 Set A/D channel type result=40 09:40:31 Set A/D encoding result=40 09:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:31 Set channel filter=0.000000e+000 result=40 09:40:31 Config A/D Result=40 09:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:31 Get A/D filter: -9.255963e+061 result=40 09:40:31 Get A/D value=-858993460 result=40 09:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:31 Aux= 09:40:31 Message to Camera, serial 138461 queued 09:41:08 Received message from Master: op=PointingHead serial=138474 09:41:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:41:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:41:08 Point started: ret=0 09:41:08 point_skyscan result=0 09:41:09 Check angles 09:41:09 SkyScan query 09:41:09 SkyScan query done: ret=0 az=135.06<-9004 ze=36.765<-9549 Statuses=0009 0009 09:41:09 Msec=0 True Az=135.06 Ze=36.765 Az status=0009 Ze status=0009 09:41:09 Check angles 09:41:09 SkyScan query 09:41:10 SkyScan query done: ret=0 az=117.615<-7841 ze=15.84<-10944 Statuses=0009 0009 09:41:10 Msec=750 True Az=117.615 Ze=15.84 Az status=0009 Ze status=0009 09:41:10 Check angles 09:41:10 SkyScan query 09:41:11 SkyScan query done: ret=0 az=99.81<-6654 ze=-5.58<-12372 Statuses=0009 0009 09:41:11 Msec=1500 True Az=99.81 Ze=-5.58 Az status=0009 Ze status=0009 09:41:11 Check angles 09:41:11 SkyScan query 09:41:11 SkyScan query done: ret=0 az=82.29<-5486 ze=-26.55<-13770 Statuses=0009 0009 09:41:11 Msec=2250 True Az=82.29 Ze=-26.55 Az status=0009 Ze status=0009 09:41:12 Check angles 09:41:12 SkyScan query 09:41:12 SkyScan query done: ret=0 az=64.74<-4316 ze=-38.58<-14572 Statuses=0009 0008 09:41:12 Msec=3000 True Az=64.74 Ze=-38.58 Az status=0009 Ze status=0008 09:41:12 Check angles 09:41:12 SkyScan query 09:41:13 SkyScan query done: ret=0 az=46.905<-3127 ze=-38.52<-14568 Statuses=0009 0008 09:41:13 Msec=3750 True Az=46.905 Ze=-38.52 Az status=0009 Ze status=0008 09:41:13 Check angles 09:41:13 SkyScan query 09:41:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:41:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:41:14 Message to Master queued w/err=0: serial=138474 error=0 09:41:19 Received message from Master: op=Filter serial=138475 09:41:19 Color wheel filter change from 0 to 0 09:41:19 FLIGetFilterPos err=0 currentPosition=0 09:41:19 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:19 Filter is already there-color wheel unchanged 09:41:19 Received message from Master: op=Shutter serial=138476 09:41:19 Shutter LASER close 09:41:19 Received message from Camera: op=State serial=138478 09:41:19 GetSingleValue result=40 Value=cccccccc 09:41:19 SkyScan query 09:41:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:41:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:20 Parameters OK 09:41:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:20 Set A/D data flow result=40 09:41:20 Set A/D channel type result=40 09:41:20 Set A/D encoding result=40 09:41:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:20 Set channel filter=0.000000e+000 result=40 09:41:20 Config A/D Result=40 09:41:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:20 Get A/D filter: -9.255963e+061 result=40 09:41:20 Get A/D value=-858993460 result=40 09:41:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:20 Parameters OK 09:41:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:20 Set A/D data flow result=40 09:41:20 Set A/D channel type result=40 09:41:20 Set A/D encoding result=40 09:41:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:20 Set channel filter=0.000000e+000 result=40 09:41:20 Config A/D Result=40 09:41:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:20 Get A/D filter: -9.255963e+061 result=40 09:41:20 Get A/D value=-858993460 result=40 09:41:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:20 Aux= 09:41:20 Message to Camera, serial 138478 queued 09:41:55 Received message from Master: op=PointingHead serial=138490 09:41:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:41:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:41:56 Point started: ret=0 09:41:56 point_skyscan result=0 09:41:57 Check angles 09:41:57 SkyScan query 09:41:57 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.295<-16553 Statuses=0009 0009 09:41:57 Msec=0 True Az=63.945 Ze=-68.295 Az status=0009 Ze status=0009 09:41:57 Check angles 09:41:57 SkyScan query 09:41:58 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.7<-17980 Statuses=0009 0009 09:41:58 Msec=750 True Az=81.885 Ze=-89.7 Az status=0009 Ze status=0009 09:41:58 Check angles 09:41:58 SkyScan query 09:41:59 SkyScan query done: ret=0 az=99.225<-6615 ze=-110.67<-19378 Statuses=0009 0009 09:41:59 Msec=1500 True Az=99.225 Ze=-110.67 Az status=0009 Ze status=0009 09:41:59 Check angles 09:41:59 SkyScan query 09:41:59 SkyScan query done: ret=0 az=116.85<-7790 ze=-131.58<-20772 Statuses=0009 0009 09:41:59 Msec=2250 True Az=116.85 Ze=-131.58 Az status=0009 Ze status=0009 09:42:00 Check angles 09:42:00 SkyScan query 09:42:00 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 09:42:00 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 09:42:00 Check angles 09:42:00 SkyScan query 09:42:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 09:42:01 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 09:42:01 Message to Master queued w/err=0: serial=138490 error=0 09:42:06 Received message from Master: op=Filter serial=138491 09:42:06 Color wheel filter change from 0 to 0 09:42:06 FLIGetFilterPos err=0 currentPosition=0 09:42:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:06 Filter is already there-color wheel unchanged 09:42:06 Received message from Master: op=Shutter serial=138492 09:42:06 Shutter LASER close 09:42:06 Received message from Camera: op=State serial=138494 09:42:06 GetSingleValue result=40 Value=cccccccc 09:42:06 SkyScan query 09:42:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:42:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:07 Parameters OK 09:42:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:07 Set A/D data flow result=40 09:42:07 Set A/D channel type result=40 09:42:07 Set A/D encoding result=40 09:42:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:07 Set channel filter=0.000000e+000 result=40 09:42:07 Config A/D Result=40 09:42:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:07 Get A/D filter: -9.255963e+061 result=40 09:42:07 Get A/D value=-858993460 result=40 09:42:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:07 Parameters OK 09:42:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:07 Set A/D data flow result=40 09:42:07 Set A/D channel type result=40 09:42:07 Set A/D encoding result=40 09:42:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:07 Set channel filter=0.000000e+000 result=40 09:42:07 Config A/D Result=40 09:42:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:07 Get A/D filter: -9.255963e+061 result=40 09:42:07 Get A/D value=-858993460 result=40 09:42:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:07 Aux= 09:42:07 Message to Camera, serial 138494 queued 09:42:43 Received message from Master: op=PointingHead serial=138507 09:42:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:42:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:42:44 Point started: ret=0 09:42:44 point_skyscan result=0 09:42:45 Check angles 09:42:45 SkyScan query 09:42:45 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 09:42:45 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 09:42:45 Check angles 09:42:45 SkyScan query 09:42:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:42:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:42:46 Message to Master queued w/err=0: serial=138507 error=0 09:42:51 Received message from Master: op=Filter serial=138508 09:42:51 Color wheel filter change from 0 to 0 09:42:51 FLIGetFilterPos err=0 currentPosition=0 09:42:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:51 Filter is already there-color wheel unchanged 09:42:51 Received message from Master: op=Shutter serial=138509 09:42:51 Shutter LASER open 09:42:51 Received message from Camera: op=State serial=138511 09:42:51 GetSingleValue result=40 Value=cccccccc 09:42:51 SkyScan query 09:42:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:42:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:52 Parameters OK 09:42:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:52 Set A/D data flow result=40 09:42:52 Set A/D channel type result=40 09:42:52 Set A/D encoding result=40 09:42:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:52 Set channel filter=0.000000e+000 result=40 09:42:52 Config A/D Result=40 09:42:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:52 Get A/D filter: -9.255963e+061 result=40 09:42:52 Get A/D value=-858993460 result=40 09:42:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:52 Parameters OK 09:42:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:52 Set A/D data flow result=40 09:42:52 Set A/D channel type result=40 09:42:52 Set A/D encoding result=40 09:42:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:52 Set channel filter=0.000000e+000 result=40 09:42:52 Config A/D Result=40 09:42:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:52 Get A/D filter: -9.255963e+061 result=40 09:42:52 Get A/D value=-858993460 result=40 09:42:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:52 Aux= 09:42:52 Message to Camera, serial 138511 queued 09:43:00 Received message from Master: op=Shutter serial=138521 09:43:00 Shutter LASER close 09:43:01 Received message from Master: op=PointingHead serial=138525 09:43:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:43:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:43:01 Point started: ret=0 09:43:01 point_skyscan result=0 09:43:02 Check angles 09:43:02 SkyScan query 09:43:03 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.55<-21570 Statuses=0009 0009 09:43:03 Msec=0 True Az=135.72 Ze=-143.55 Az status=0009 Ze status=0009 09:43:03 Check angles 09:43:03 SkyScan query 09:43:03 SkyScan query done: ret=0 az=153.315<-10221 ze=-122.55<-20170 Statuses=0009 0009 09:43:03 Msec=750 True Az=153.315 Ze=-122.55 Az status=0009 Ze status=0009 09:43:03 Check angles 09:43:03 SkyScan query 09:43:04 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.67<-18778 Statuses=0009 0009 09:43:04 Msec=1500 True Az=170.76 Ze=-101.67 Az status=0009 Ze status=0009 09:43:04 Check angles 09:43:04 SkyScan query 09:43:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.625<-17375 Statuses=0008 0009 09:43:05 Msec=2250 True Az=176.01 Ze=-80.625 Az status=0008 Ze status=0009 09:43:05 Check angles 09:43:05 SkyScan query 09:43:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.265<-15951 Statuses=0008 0009 09:43:06 Msec=3000 True Az=176.01 Ze=-59.265 Az status=0008 Ze status=0009 09:43:06 Check angles 09:43:06 SkyScan query 09:43:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:43:06 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:43:06 Message to Master queued w/err=0: serial=138525 error=0 09:43:11 Received message from Master: op=Filter serial=138526 09:43:11 Color wheel filter change from 0 to 0 09:43:11 FLIGetFilterPos err=0 currentPosition=0 09:43:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:11 Filter is already there-color wheel unchanged 09:43:11 Received message from Master: op=Shutter serial=138527 09:43:11 Shutter LASER close 09:43:12 Received message from Camera: op=State serial=138529 09:43:12 GetSingleValue result=40 Value=cccccccc 09:43:12 SkyScan query 09:43:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:43:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:12 Parameters OK 09:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:12 Set A/D data flow result=40 09:43:12 Set A/D channel type result=40 09:43:12 Set A/D encoding result=40 09:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:12 Set channel filter=0.000000e+000 result=40 09:43:12 Config A/D Result=40 09:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:12 Get A/D filter: -9.255963e+061 result=40 09:43:12 Get A/D value=-858993460 result=40 09:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:12 Parameters OK 09:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:12 Set A/D data flow result=40 09:43:12 Set A/D channel type result=40 09:43:12 Set A/D encoding result=40 09:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:12 Set channel filter=0.000000e+000 result=40 09:43:12 Config A/D Result=40 09:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:12 Get A/D filter: -9.255963e+061 result=40 09:43:12 Get A/D value=-858993460 result=40 09:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:12 Aux= 09:43:12 Message to Camera, serial 138529 queued 09:43:48 Received message from Master: op=PointingHead serial=138541 09:43:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:43:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:43:48 Point started: ret=0 09:43:48 point_skyscan result=0 09:43:49 Check angles 09:43:49 SkyScan query 09:43:50 SkyScan query done: ret=0 az=153.285<-10219 ze=-22.05<-13470 Statuses=0009 0009 09:43:50 Msec=0 True Az=153.285 Ze=-22.05 Az status=0009 Ze status=0009 09:43:50 Check angles 09:43:50 SkyScan query 09:43:51 SkyScan query done: ret=0 az=135.855<-9057 ze=-1.05<-12070 Statuses=0009 0009 09:43:51 Msec=750 True Az=135.855 Ze=-1.05 Az status=0009 Ze status=0009 09:43:51 Check angles 09:43:51 SkyScan query 09:43:51 SkyScan query done: ret=0 az=118.245<-7883 ze=19.875<-10675 Statuses=0009 0009 09:43:51 Msec=1500 True Az=118.245 Ze=19.875 Az status=0009 Ze status=0009 09:43:51 Check angles 09:43:51 SkyScan query 09:43:52 SkyScan query done: ret=0 az=100.86<-6724 ze=40.875<-9275 Statuses=0009 0009 09:43:52 Msec=2250 True Az=100.86 Ze=40.875 Az status=0009 Ze status=0009 09:43:52 Check angles 09:43:52 SkyScan query 09:43:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 09:43:53 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 09:43:53 Check angles 09:43:53 SkyScan query 09:43:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:43:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:43:54 Message to Master queued w/err=0: serial=138541 error=0 09:43:59 Received message from Master: op=Filter serial=138542 09:43:59 Color wheel filter change from 0 to 0 09:43:59 FLIGetFilterPos err=0 currentPosition=0 09:43:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:59 Filter is already there-color wheel unchanged 09:43:59 Received message from Master: op=Shutter serial=138543 09:43:59 Shutter LASER close 09:43:59 Received message from Camera: op=State serial=138545 09:43:59 GetSingleValue result=40 Value=cccccccc 09:43:59 SkyScan query 09:43:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:43:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:59 Parameters OK 09:43:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:59 Set A/D data flow result=40 09:43:59 Set A/D channel type result=40 09:43:59 Set A/D encoding result=40 09:43:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:59 Set channel filter=0.000000e+000 result=40 09:43:59 Config A/D Result=40 09:43:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:59 Get A/D filter: -9.255963e+061 result=40 09:43:59 Get A/D value=-858993460 result=40 09:43:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:59 Parameters OK 09:43:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:59 Set A/D data flow result=40 09:43:59 Set A/D channel type result=40 09:43:59 Set A/D encoding result=40 09:43:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:59 Set channel filter=0.000000e+000 result=40 09:43:59 Config A/D Result=40 09:43:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:59 Get A/D filter: -9.255963e+061 result=40 09:43:59 Get A/D value=-858993460 result=40 09:43:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:59 Aux= 09:43:59 Message to Camera, serial 138545 queued 09:44:36 Received message from Master: op=PointingHead serial=138558 09:44:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:44:36 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:44:36 Point started: ret=0 09:44:36 point_skyscan result=0 09:44:37 Check angles 09:44:37 SkyScan query 09:44:38 SkyScan query done: ret=0 az=108.795<-7253 ze=38.475<-9435 Statuses=0009 0008 09:44:38 Msec=0 True Az=108.795 Ze=38.475 Az status=0009 Ze status=0008 09:44:38 Check angles 09:44:38 SkyScan query 09:44:39 SkyScan query done: ret=0 az=126.645<-8443 ze=38.505<-9433 Statuses=0009 0008 09:44:39 Msec=750 True Az=126.645 Ze=38.505 Az status=0009 Ze status=0008 09:44:39 Check angles 09:44:39 SkyScan query 09:44:39 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 09:44:39 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 09:44:40 Check angles 09:44:40 SkyScan query 09:44:40 SkyScan query done: ret=0 az=161.91<-10794 ze=38.505<-9433 Statuses=0009 0008 09:44:40 Msec=2250 True Az=161.91 Ze=38.505 Az status=0009 Ze status=0008 09:44:40 Check angles 09:44:40 SkyScan query 09:44:41 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:44:41 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:44:41 Check angles 09:44:41 SkyScan query 09:44:42 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:44:42 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:44:42 Message to Master queued w/err=0: serial=138558 error=0 09:44:47 Received message from Master: op=Filter serial=138559 09:44:47 Color wheel filter change from 0 to 0 09:44:47 FLIGetFilterPos err=0 currentPosition=0 09:44:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:47 Filter is already there-color wheel unchanged 09:44:47 Received message from Master: op=Shutter serial=138560 09:44:47 Shutter LASER close 09:44:47 Received message from Camera: op=State serial=138562 09:44:47 GetSingleValue result=40 Value=cccccccc 09:44:47 SkyScan query 09:44:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:44:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:47 Parameters OK 09:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:47 Set A/D data flow result=40 09:44:47 Set A/D channel type result=40 09:44:47 Set A/D encoding result=40 09:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:47 Set channel filter=0.000000e+000 result=40 09:44:47 Config A/D Result=40 09:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:47 Get A/D filter: -9.255963e+061 result=40 09:44:47 Get A/D value=-858993460 result=40 09:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:47 Parameters OK 09:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:47 Set A/D data flow result=40 09:44:47 Set A/D channel type result=40 09:44:47 Set A/D encoding result=40 09:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:47 Set channel filter=0.000000e+000 result=40 09:44:47 Config A/D Result=40 09:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:47 Get A/D filter: -9.255963e+061 result=40 09:44:47 Get A/D value=-858993460 result=40 09:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:47 Aux= 09:44:47 Message to Camera, serial 138562 queued 09:45:24 Received message from Master: op=PointingHead serial=138575 09:45:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:45:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:45:25 Point started: ret=0 09:45:25 point_skyscan result=0 09:45:25 Check angles 09:45:25 SkyScan query 09:45:26 SkyScan query done: ret=0 az=152.82<-10188 ze=8.61<-11426 Statuses=0009 0009 09:45:26 Msec=0 True Az=152.82 Ze=8.61 Az status=0009 Ze status=0009 09:45:26 Check angles 09:45:26 SkyScan query 09:45:27 SkyScan query done: ret=0 az=134.85<-8990 ze=-13.11<-12874 Statuses=0009 0009 09:45:27 Msec=750 True Az=134.85 Ze=-13.11 Az status=0009 Ze status=0009 09:45:27 Received message from Master: op=Identify serial=138576 09:45:27 Check angles 09:45:27 SkyScan query 09:45:27 SkyScan query done: ret=0 az=117.45<-7830 ze=-33.78<-14252 Statuses=0009 0009 09:45:27 Msec=1500 True Az=117.45 Ze=-33.78 Az status=0009 Ze status=0009 09:45:28 Check angles 09:45:28 SkyScan query 09:45:28 SkyScan query done: ret=0 az=99.66<-6644 ze=-51.57<-15438 Statuses=0009 0009 09:45:28 Msec=2250 True Az=99.66 Ze=-51.57 Az status=0009 Ze status=0009 09:45:28 Check angles 09:45:28 SkyScan query 09:45:29 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 09:45:29 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 09:45:29 Check angles 09:45:29 SkyScan query 09:45:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:45:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:45:30 Message to Master queued w/err=0: serial=138575 error=0 09:45:35 Received message from Master: op=Filter serial=138579 09:45:35 Color wheel filter change from 0 to 0 09:45:35 FLIGetFilterPos err=0 currentPosition=0 09:45:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:35 Filter is already there-color wheel unchanged 09:45:35 Received message from Master: op=Shutter serial=138580 09:45:35 Shutter LASER close 09:45:35 Received message from Camera: op=State serial=138582 09:45:35 GetSingleValue result=40 Value=cccccccc 09:45:35 SkyScan query 09:45:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:45:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:35 Parameters OK 09:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:35 Set A/D data flow result=40 09:45:35 Set A/D channel type result=40 09:45:35 Set A/D encoding result=40 09:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:35 Set channel filter=0.000000e+000 result=40 09:45:35 Config A/D Result=40 09:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:35 Get A/D filter: -9.255963e+061 result=40 09:45:35 Get A/D value=-858993460 result=40 09:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:35 Parameters OK 09:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:35 Set A/D data flow result=40 09:45:35 Set A/D channel type result=40 09:45:35 Set A/D encoding result=40 09:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:35 Set channel filter=0.000000e+000 result=40 09:45:35 Config A/D Result=40 09:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:35 Get A/D filter: -9.255963e+061 result=40 09:45:35 Get A/D value=-858993460 result=40 09:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:35 Aux= 09:45:35 Message to Camera, serial 138582 queued 09:46:12 Received message from Master: op=PointingHead serial=138595 09:46:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) [UTC 2018-12-14 09:46:12] 09:46:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:46:13 Point started: ret=0 09:46:13 point_skyscan result=0 09:46:14 Check angles 09:46:14 SkyScan query 09:46:14 SkyScan query done: ret=0 az=108.78<-7252 ze=-81.015<-17401 Statuses=0009 0009 09:46:14 Msec=0 True Az=108.78 Ze=-81.015 Az status=0009 Ze status=0009 09:46:14 Check angles 09:46:14 SkyScan query 09:46:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 09:46:15 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 09:46:15 Check angles 09:46:15 SkyScan query 09:46:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.91<-20194 Statuses=0008 0009 09:46:16 Msec=1500 True Az=112.995 Ze=-122.91 Az status=0008 Ze status=0009 09:46:16 Check angles 09:46:16 SkyScan query 09:46:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.88<-21592 Statuses=0008 0009 09:46:16 Msec=2250 True Az=112.995 Ze=-143.88 Az status=0008 Ze status=0009 09:46:17 Check angles 09:46:17 SkyScan query 09:46:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.835<-22989 Statuses=0008 0009 09:46:17 Msec=3000 True Az=112.995 Ze=-164.835 Az status=0008 Ze status=0009 09:46:17 Check angles 09:46:17 SkyScan query 09:46:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 09:46:18 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 09:46:18 Message to Master queued w/err=0: serial=138595 error=0 09:46:23 Received message from Master: op=Filter serial=138596 09:46:23 Color wheel filter change from 0 to 0 09:46:23 FLIGetFilterPos err=0 currentPosition=0 09:46:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:23 Filter is already there-color wheel unchanged 09:46:23 Received message from Master: op=Shutter serial=138597 09:46:23 Shutter LASER open 09:46:23 Received message from Camera: op=State serial=138599 09:46:23 GetSingleValue result=40 Value=cccccccc 09:46:23 SkyScan query 09:46:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:46:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:24 Parameters OK 09:46:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:24 Set A/D data flow result=40 09:46:24 Set A/D channel type result=40 09:46:24 Set A/D encoding result=40 09:46:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:24 Set channel filter=0.000000e+000 result=40 09:46:24 Config A/D Result=40 09:46:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:24 Get A/D filter: -9.255963e+061 result=40 09:46:24 Get A/D value=-858993460 result=40 09:46:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:24 Parameters OK 09:46:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:24 Set A/D data flow result=40 09:46:24 Set A/D channel type result=40 09:46:24 Set A/D encoding result=40 09:46:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:24 Set channel filter=0.000000e+000 result=40 09:46:24 Config A/D Result=40 09:46:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:24 Get A/D filter: -9.255963e+061 result=40 09:46:24 Get A/D value=-858993460 result=40 09:46:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:24 Aux= 09:46:24 Message to Camera, serial 138599 queued 09:46:32 Received message from Master: op=Shutter serial=138609 09:46:32 Shutter LASER close 09:46:33 Received message from Master: op=PointingHead serial=138613 09:46:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:46:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:46:33 Point started: ret=0 09:46:33 point_skyscan result=0 09:46:34 Check angles 09:46:34 SkyScan query 09:46:34 SkyScan query done: ret=0 az=89.835<-5989 ze=157.32<-1512 Statuses=0009 0009 09:46:34 Msec=0 True Az=89.835 Ze=157.32 Az status=0009 Ze status=0009 09:46:35 Check angles 09:46:35 SkyScan query 09:46:35 SkyScan query done: ret=0 az=72.495<-4833 ze=136.35<-2910 Statuses=0009 0009 09:46:35 Msec=750 True Az=72.495 Ze=136.35 Az status=0009 Ze status=0009 09:46:35 Check angles 09:46:35 SkyScan query 09:46:36 SkyScan query done: ret=0 az=55.05<-3670 ze=115.425<-4305 Statuses=0009 0009 09:46:36 Msec=1500 True Az=55.05 Ze=115.425 Az status=0009 Ze status=0009 09:46:36 Check angles 09:46:36 SkyScan query 09:46:37 SkyScan query done: ret=0 az=40.965<-2731 ze=94.41<-5706 Statuses=0009 0009 09:46:37 Msec=2250 True Az=40.965 Ze=94.41 Az status=0009 Ze status=0009 09:46:37 Check angles 09:46:37 SkyScan query 09:46:37 SkyScan query done: ret=0 az=40.995<-2733 ze=73.485<-7101 Statuses=0008 0009 09:46:37 Msec=3000 True Az=40.995 Ze=73.485 Az status=0008 Ze status=0009 09:46:38 Check angles 09:46:38 SkyScan query 09:46:38 SkyScan query done: ret=0 az=40.995<-2733 ze=52.875<-8475 Statuses=0008 0009 09:46:38 Msec=3750 True Az=40.995 Ze=52.875 Az status=0008 Ze status=0009 09:46:38 Check angles 09:46:38 SkyScan query 09:46:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:46:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:46:39 Message to Master queued w/err=0: serial=138613 error=0 09:46:44 Received message from Master: op=Filter serial=138614 09:46:44 Color wheel filter change from 0 to 0 09:46:44 FLIGetFilterPos err=0 currentPosition=0 09:46:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:44 Filter is already there-color wheel unchanged 09:46:44 Received message from Master: op=Shutter serial=138615 09:46:44 Shutter LASER close 09:46:44 Received message from Camera: op=State serial=138617 09:46:44 GetSingleValue result=40 Value=cccccccc 09:46:44 SkyScan query 09:46:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:46:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:45 Parameters OK 09:46:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:45 Set A/D data flow result=40 09:46:45 Set A/D channel type result=40 09:46:45 Set A/D encoding result=40 09:46:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:45 Set channel filter=0.000000e+000 result=40 09:46:45 Config A/D Result=40 09:46:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:45 Get A/D filter: -9.255963e+061 result=40 09:46:45 Get A/D value=-858993460 result=40 09:46:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:45 Parameters OK 09:46:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:45 Set A/D data flow result=40 09:46:45 Set A/D channel type result=40 09:46:45 Set A/D encoding result=40 09:46:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:45 Set channel filter=0.000000e+000 result=40 09:46:45 Config A/D Result=40 09:46:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:45 Get A/D filter: -9.255963e+061 result=40 09:46:45 Get A/D value=-858993460 result=40 09:46:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:45 Aux= 09:46:45 Message to Camera, serial 138617 queued 09:47:22 Received message from Master: op=PointingHead serial=138630 09:47:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:47:22 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:47:22 Point started: ret=0 09:47:22 point_skyscan result=0 09:47:23 Check angles 09:47:23 SkyScan query 09:47:23 SkyScan query done: ret=0 az=63.99<-4266 ze=66.54<-7564 Statuses=0009 0008 09:47:23 Msec=0 True Az=63.99 Ze=66.54 Az status=0009 Ze status=0008 09:47:23 Check angles 09:47:23 SkyScan query 09:47:24 SkyScan query done: ret=0 az=81.555<-5437 ze=66.495<-7567 Statuses=0009 0008 09:47:24 Msec=750 True Az=81.555 Ze=66.495 Az status=0009 Ze status=0008 09:47:24 Check angles 09:47:24 SkyScan query 09:47:25 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 09:47:25 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 09:47:25 Check angles 09:47:25 SkyScan query 09:47:26 SkyScan query done: ret=0 az=117.27<-7818 ze=66.495<-7567 Statuses=0009 0008 09:47:26 Msec=2250 True Az=117.27 Ze=66.495 Az status=0009 Ze status=0008 09:47:26 Check angles 09:47:26 SkyScan query 09:47:26 SkyScan query done: ret=0 az=134.745<-8983 ze=66.495<-7567 Statuses=0009 0008 09:47:26 Msec=3000 True Az=134.745 Ze=66.495 Az status=0009 Ze status=0008 09:47:27 Check angles 09:47:27 SkyScan query 09:47:27 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 09:47:27 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 09:47:27 Check angles 09:47:27 SkyScan query 09:47:28 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:47:28 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:47:28 Message to Master queued w/err=0: serial=138630 error=0 09:47:33 Received message from Master: op=Filter serial=138631 09:47:33 Color wheel filter change from 0 to 0 09:47:33 FLIGetFilterPos err=0 currentPosition=0 09:47:33 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:33 Filter is already there-color wheel unchanged 09:47:33 Received message from Master: op=Shutter serial=138632 09:47:33 Shutter LASER close 09:47:33 Received message from Camera: op=State serial=138634 09:47:33 GetSingleValue result=40 Value=cccccccc 09:47:33 SkyScan query 09:47:34 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:47:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:34 Parameters OK 09:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:34 Set A/D data flow result=40 09:47:34 Set A/D channel type result=40 09:47:34 Set A/D encoding result=40 09:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:34 Set channel filter=0.000000e+000 result=40 09:47:34 Config A/D Result=40 09:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:34 Get A/D filter: -9.255963e+061 result=40 09:47:34 Get A/D value=-858993460 result=40 09:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:34 Parameters OK 09:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:34 Set A/D data flow result=40 09:47:34 Set A/D channel type result=40 09:47:34 Set A/D encoding result=40 09:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:34 Set channel filter=0.000000e+000 result=40 09:47:34 Config A/D Result=40 09:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:34 Get A/D filter: -9.255963e+061 result=40 09:47:34 Get A/D value=-858993460 result=40 09:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:34 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:34 Aux= 09:47:34 Message to Camera, serial 138634 queued 09:48:10 Received message from Master: op=PointingHead serial=138647 09:48:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:48:10 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:48:11 Point started: ret=0 09:48:11 point_skyscan result=0 09:48:12 Check angles 09:48:12 SkyScan query 09:48:12 SkyScan query done: ret=0 az=134.595<-8973 ze=36.285<-9581 Statuses=0009 0009 09:48:12 Msec=0 True Az=134.595 Ze=36.285 Az status=0009 Ze status=0009 09:48:12 Check angles 09:48:12 SkyScan query 09:48:13 SkyScan query done: ret=0 az=116.85<-7790 ze=14.835<-11011 Statuses=0009 0009 09:48:13 Msec=750 True Az=116.85 Ze=14.835 Az status=0009 Ze status=0009 09:48:13 Check angles 09:48:13 SkyScan query 09:48:14 SkyScan query done: ret=0 az=99.39<-6626 ze=-6.105<-12407 Statuses=0009 0009 09:48:14 Msec=1500 True Az=99.39 Ze=-6.105 Az status=0009 Ze status=0009 09:48:14 Check angles 09:48:14 SkyScan query 09:48:14 SkyScan query done: ret=0 az=81.615<-5441 ze=-27.495<-13833 Statuses=0009 0009 09:48:14 Msec=2250 True Az=81.615 Ze=-27.495 Az status=0009 Ze status=0009 09:48:15 Check angles 09:48:15 SkyScan query 09:48:15 SkyScan query done: ret=0 az=64.05<-4270 ze=-38.595<-14573 Statuses=0009 0008 09:48:15 Msec=3000 True Az=64.05 Ze=-38.595 Az status=0009 Ze status=0008 09:48:15 Check angles 09:48:15 SkyScan query 09:48:16 SkyScan query done: ret=0 az=46.65<-3110 ze=-38.52<-14568 Statuses=0009 0008 09:48:16 Msec=3750 True Az=46.65 Ze=-38.52 Az status=0009 Ze status=0008 09:48:16 Check angles 09:48:16 SkyScan query 09:48:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:48:17 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:48:17 Message to Master queued w/err=0: serial=138647 error=0 09:48:22 Received message from Master: op=Filter serial=138648 09:48:22 Color wheel filter change from 0 to 0 09:48:22 FLIGetFilterPos err=0 currentPosition=0 09:48:22 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:22 Filter is already there-color wheel unchanged 09:48:22 Received message from Master: op=Shutter serial=138649 09:48:22 Shutter LASER close 09:48:22 Received message from Camera: op=State serial=138651 09:48:22 GetSingleValue result=40 Value=cccccccc 09:48:22 SkyScan query 09:48:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:48:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:23 Parameters OK 09:48:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:23 Set A/D data flow result=40 09:48:23 Set A/D channel type result=40 09:48:23 Set A/D encoding result=40 09:48:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:23 Set channel filter=0.000000e+000 result=40 09:48:23 Config A/D Result=40 09:48:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:23 Get A/D filter: -9.255963e+061 result=40 09:48:23 Get A/D value=-858993460 result=40 09:48:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:23 Parameters OK 09:48:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:23 Set A/D data flow result=40 09:48:23 Set A/D channel type result=40 09:48:23 Set A/D encoding result=40 09:48:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:23 Set channel filter=0.000000e+000 result=40 09:48:23 Config A/D Result=40 09:48:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:23 Get A/D filter: -9.255963e+061 result=40 09:48:23 Get A/D value=-858993460 result=40 09:48:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:23 Aux= 09:48:23 Message to Camera, serial 138651 queued 09:48:59 Received message from Master: op=PointingHead serial=138664 09:48:59 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:48:59 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:49:00 Point started: ret=0 09:49:00 point_skyscan result=0 09:49:00 Check angles 09:49:00 SkyScan query 09:49:01 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.115<-16541 Statuses=0009 0009 09:49:01 Msec=0 True Az=63.87 Ze=-68.115 Az status=0009 Ze status=0009 09:49:01 Check angles 09:49:01 SkyScan query 09:49:02 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.535<-17969 Statuses=0009 0009 09:49:02 Msec=750 True Az=81.735 Ze=-89.535 Az status=0009 Ze status=0009 09:49:02 Check angles 09:49:02 SkyScan query 09:49:03 SkyScan query done: ret=0 az=99.525<-6635 ze=-110.91<-19394 Statuses=0009 0009 09:49:03 Msec=1500 True Az=99.525 Ze=-110.91 Az status=0009 Ze status=0009 09:49:03 Check angles 09:49:03 SkyScan query 09:49:03 SkyScan query done: ret=0 az=116.97<-7798 ze=-131.805<-20787 Statuses=0009 0009 09:49:03 Msec=2250 True Az=116.97 Ze=-131.805 Az status=0009 Ze status=0009 09:49:03 Check angles 09:49:03 SkyScan query 09:49:04 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 09:49:04 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 09:49:04 Check angles 09:49:04 SkyScan query 09:49:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 09:49:05 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 09:49:05 Message to Master queued w/err=0: serial=138664 error=0 09:49:10 Received message from Master: op=Filter serial=138665 09:49:10 Color wheel filter change from 0 to 0 09:49:10 FLIGetFilterPos err=0 currentPosition=0 09:49:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:10 Filter is already there-color wheel unchanged 09:49:10 Received message from Master: op=Shutter serial=138666 09:49:10 Shutter LASER close 09:49:10 Received message from Camera: op=State serial=138668 09:49:10 GetSingleValue result=40 Value=cccccccc 09:49:10 SkyScan query 09:49:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:49:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:11 Parameters OK 09:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:11 Set A/D data flow result=40 09:49:11 Set A/D channel type result=40 09:49:11 Set A/D encoding result=40 09:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:11 Set channel filter=0.000000e+000 result=40 09:49:11 Config A/D Result=40 09:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:11 Get A/D filter: -9.255963e+061 result=40 09:49:11 Get A/D value=-858993460 result=40 09:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:11 Parameters OK 09:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:11 Set A/D data flow result=40 09:49:11 Set A/D channel type result=40 09:49:11 Set A/D encoding result=40 09:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:11 Set channel filter=0.000000e+000 result=40 09:49:11 Config A/D Result=40 09:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:11 Get A/D filter: -9.255963e+061 result=40 09:49:11 Get A/D value=-858993460 result=40 09:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:11 Aux= 09:49:11 Message to Camera, serial 138668 queued 09:49:47 Received message from Master: op=PointingHead serial=138681 09:49:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:49:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:49:48 Point started: ret=0 09:49:48 point_skyscan result=0 09:49:49 Check angles 09:49:49 SkyScan query 09:49:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0009 0009 09:49:49 Msec=0 True Az=112.995 Ze=-171.12 Az status=0009 Ze status=0009 09:49:49 Check angles 09:49:49 SkyScan query 09:49:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:49:50 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:49:50 Message to Master queued w/err=0: serial=138681 error=0 09:49:55 Received message from Master: op=Filter serial=138682 09:49:55 Color wheel filter change from 0 to 0 09:49:55 FLIGetFilterPos err=0 currentPosition=0 09:49:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:55 Filter is already there-color wheel unchanged 09:49:55 Received message from Master: op=Shutter serial=138683 09:49:55 Shutter LASER open 09:49:55 Received message from Camera: op=State serial=138685 09:49:55 GetSingleValue result=40 Value=cccccccc 09:49:55 SkyScan query 09:49:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:49:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:56 Parameters OK 09:49:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:56 Set A/D data flow result=40 09:49:56 Set A/D channel type result=40 09:49:56 Set A/D encoding result=40 09:49:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:56 Set channel filter=0.000000e+000 result=40 09:49:56 Config A/D Result=40 09:49:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:56 Get A/D filter: -9.255963e+061 result=40 09:49:56 Get A/D value=-858993460 result=40 09:49:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:56 Parameters OK 09:49:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:56 Set A/D data flow result=40 09:49:56 Set A/D channel type result=40 09:49:56 Set A/D encoding result=40 09:49:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:56 Set channel filter=0.000000e+000 result=40 09:49:56 Config A/D Result=40 09:49:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:56 Get A/D filter: -9.255963e+061 result=40 09:49:56 Get A/D value=-858993460 result=40 09:49:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:56 Aux= 09:49:56 Message to Camera, serial 138685 queued 09:50:04 Received message from Master: op=Shutter serial=138695 09:50:04 Shutter LASER close 09:50:05 Received message from Master: op=PointingHead serial=138699 09:50:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:50:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:50:05 Point started: ret=0 09:50:05 point_skyscan result=0 09:50:06 Check angles 09:50:06 SkyScan query 09:50:07 SkyScan query done: ret=0 az=135.69<-9046 ze=-143.58<-21572 Statuses=0009 0009 09:50:07 Msec=0 True Az=135.69 Ze=-143.58 Az status=0009 Ze status=0009 09:50:07 Check angles 09:50:07 SkyScan query 09:50:07 SkyScan query done: ret=0 az=153.135<-10209 ze=-122.595<-20173 Statuses=0009 0009 09:50:07 Msec=750 True Az=153.135 Ze=-122.595 Az status=0009 Ze status=0009 09:50:07 Check angles 09:50:07 SkyScan query 09:50:08 SkyScan query done: ret=0 az=170.625<-11375 ze=-101.715<-18781 Statuses=0009 0009 09:50:08 Msec=1500 True Az=170.625 Ze=-101.715 Az status=0009 Ze status=0009 09:50:08 Check angles 09:50:08 SkyScan query 09:50:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.685<-17379 Statuses=0008 0009 09:50:09 Msec=2250 True Az=176.01 Ze=-80.685 Az status=0008 Ze status=0009 09:50:09 Check angles 09:50:09 SkyScan query 09:50:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.73<-15982 Statuses=0008 0009 09:50:10 Msec=3000 True Az=176.01 Ze=-59.73 Az status=0008 Ze status=0009 09:50:10 Check angles 09:50:10 SkyScan query 09:50:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 09:50:10 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 09:50:10 Message to Master queued w/err=0: serial=138699 error=0 09:50:15 Received message from Master: op=Filter serial=138700 09:50:15 Color wheel filter change from 0 to 0 09:50:15 FLIGetFilterPos err=0 currentPosition=0 09:50:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:15 Filter is already there-color wheel unchanged 09:50:15 Received message from Master: op=Shutter serial=138701 09:50:15 Shutter LASER close 09:50:16 Received message from Camera: op=State serial=138703 09:50:16 GetSingleValue result=40 Value=cccccccc 09:50:16 SkyScan query 09:50:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:50:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:16 Parameters OK 09:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:16 Set A/D data flow result=40 09:50:16 Set A/D channel type result=40 09:50:16 Set A/D encoding result=40 09:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:16 Set channel filter=0.000000e+000 result=40 09:50:16 Config A/D Result=40 09:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:16 Get A/D filter: -9.255963e+061 result=40 09:50:16 Get A/D value=-858993460 result=40 09:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:16 Parameters OK 09:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:16 Set A/D data flow result=40 09:50:16 Set A/D channel type result=40 09:50:16 Set A/D encoding result=40 09:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:16 Set channel filter=0.000000e+000 result=40 09:50:16 Config A/D Result=40 09:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:16 Get A/D filter: -9.255963e+061 result=40 09:50:16 Get A/D value=-858993460 result=40 09:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:16 Aux= 09:50:16 Message to Camera, serial 138703 queued 09:50:52 Received message from Master: op=PointingHead serial=138715 09:50:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:50:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:50:52 Point started: ret=0 09:50:52 point_skyscan result=0 09:50:53 Check angles 09:50:53 SkyScan query 09:50:54 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.255<-13417 Statuses=0009 0009 09:50:54 Msec=0 True Az=152.73 Ze=-21.255 Az status=0009 Ze status=0009 09:50:54 Check angles 09:50:54 SkyScan query 09:50:55 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.315<-12021 Statuses=0009 0009 09:50:55 Msec=750 True Az=135.15 Ze=-0.315 Az status=0009 Ze status=0009 09:50:55 Check angles 09:50:55 SkyScan query 09:50:55 SkyScan query done: ret=0 az=117.315<-7821 ze=21.09<-10594 Statuses=0009 0009 09:50:55 Msec=1500 True Az=117.315 Ze=21.09 Az status=0009 Ze status=0009 09:50:55 Check angles 09:50:55 SkyScan query 09:50:56 SkyScan query done: ret=0 az=99.915<-6661 ze=42.015<-9199 Statuses=0009 0009 09:50:56 Msec=2250 True Az=99.915 Ze=42.015 Az status=0009 Ze status=0009 09:50:56 Check angles 09:50:56 SkyScan query 09:50:57 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:50:57 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:50:57 Check angles 09:50:57 SkyScan query 09:50:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:50:58 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:50:58 Message to Master queued w/err=0: serial=138715 error=0 09:51:03 Received message from Master: op=Filter serial=138716 09:51:03 Color wheel filter change from 0 to 0 09:51:03 FLIGetFilterPos err=0 currentPosition=0 09:51:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:03 Filter is already there-color wheel unchanged 09:51:03 Received message from Master: op=Shutter serial=138717 09:51:03 Shutter LASER close 09:51:03 Received message from Camera: op=State serial=138719 09:51:03 GetSingleValue result=40 Value=cccccccc 09:51:03 SkyScan query 09:51:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:51:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:03 Parameters OK 09:51:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:03 Set A/D data flow result=40 09:51:03 Set A/D channel type result=40 09:51:03 Set A/D encoding result=40 09:51:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:03 Set channel filter=0.000000e+000 result=40 09:51:03 Config A/D Result=40 09:51:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:03 Get A/D filter: -9.255963e+061 result=40 09:51:03 Get A/D value=-858993460 result=40 09:51:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:03 Parameters OK 09:51:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:03 Set A/D data flow result=40 09:51:03 Set A/D channel type result=40 09:51:03 Set A/D encoding result=40 09:51:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:03 Set channel filter=0.000000e+000 result=40 09:51:03 Config A/D Result=40 09:51:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:03 Get A/D filter: -9.255963e+061 result=40 09:51:03 Get A/D value=-858993460 result=40 09:51:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:03 Aux= 09:51:03 Message to Camera, serial 138719 queued 09:51:40 Received message from Master: op=PointingHead serial=138732 09:51:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:51:40 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:51:41 Point started: ret=0 09:51:41 point_skyscan result=0 09:51:41 Check angles 09:51:41 SkyScan query 09:51:42 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 09:51:42 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 09:51:42 Check angles 09:51:42 SkyScan query 09:51:43 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 09:51:43 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 09:51:43 Check angles 09:51:43 SkyScan query 09:51:43 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 09:51:43 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 09:51:44 Check angles 09:51:44 SkyScan query 09:51:44 SkyScan query done: ret=0 az=161.505<-10767 ze=38.505<-9433 Statuses=0009 0008 09:51:44 Msec=2250 True Az=161.505 Ze=38.505 Az status=0009 Ze status=0008 09:51:44 Check angles 09:51:44 SkyScan query 09:51:45 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:51:45 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:51:45 Check angles 09:51:45 SkyScan query 09:51:46 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:51:46 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:51:46 Message to Master queued w/err=0: serial=138732 error=0 09:51:51 Received message from Master: op=Filter serial=138733 09:51:51 Color wheel filter change from 0 to 0 09:51:51 FLIGetFilterPos err=0 currentPosition=0 09:51:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:51 Filter is already there-color wheel unchanged 09:51:51 Received message from Master: op=Shutter serial=138734 09:51:51 Shutter LASER close 09:51:51 Received message from Camera: op=State serial=138736 09:51:51 GetSingleValue result=40 Value=cccccccc 09:51:51 SkyScan query 09:51:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:51:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:51 Parameters OK 09:51:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:51 Set A/D data flow result=40 09:51:51 Set A/D channel type result=40 09:51:51 Set A/D encoding result=40 09:51:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:51 Set channel filter=0.000000e+000 result=40 09:51:51 Config A/D Result=40 09:51:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:51 Get A/D filter: -9.255963e+061 result=40 09:51:51 Get A/D value=-858993460 result=40 09:51:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:51 Parameters OK 09:51:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:51 Set A/D data flow result=40 09:51:51 Set A/D channel type result=40 09:51:51 Set A/D encoding result=40 09:51:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:51 Set channel filter=0.000000e+000 result=40 09:51:51 Config A/D Result=40 09:51:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:51 Get A/D filter: -9.255963e+061 result=40 09:51:51 Get A/D value=-858993460 result=40 09:51:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:51 Aux= 09:51:51 Message to Camera, serial 138736 queued 09:52:28 Received message from Master: op=PointingHead serial=138749 09:52:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:52:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:52:29 Point started: ret=0 09:52:29 point_skyscan result=0 09:52:29 Check angles 09:52:29 SkyScan query 09:52:30 SkyScan query done: ret=0 az=152.76<-10184 ze=8.46<-11436 Statuses=0009 0009 09:52:30 Msec=0 True Az=152.76 Ze=8.46 Az status=0009 Ze status=0009 09:52:30 Check angles 09:52:30 SkyScan query 09:52:31 SkyScan query done: ret=0 az=134.895<-8993 ze=-12.975<-12865 Statuses=0009 0009 09:52:31 Msec=750 True Az=134.895 Ze=-12.975 Az status=0009 Ze status=0009 09:52:31 Check angles 09:52:31 SkyScan query 09:52:31 SkyScan query done: ret=0 az=117.42<-7828 ze=-33.9<-14260 Statuses=0009 0009 09:52:31 Msec=1500 True Az=117.42 Ze=-33.9 Az status=0009 Ze status=0009 09:52:32 Check angles 09:52:32 SkyScan query 09:52:32 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.57<-15438 Statuses=0009 0009 09:52:32 Msec=2250 True Az=100.05 Ze=-51.57 Az status=0009 Ze status=0009 09:52:32 Check angles 09:52:32 SkyScan query 09:52:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 09:52:33 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 09:52:33 Check angles 09:52:33 SkyScan query 09:52:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:52:34 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:52:34 Message to Master queued w/err=0: serial=138749 error=0 09:52:39 Received message from Master: op=Filter serial=138750 09:52:39 Color wheel filter change from 0 to 0 09:52:39 FLIGetFilterPos err=0 currentPosition=0 09:52:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:39 Filter is already there-color wheel unchanged 09:52:39 Received message from Master: op=Shutter serial=138751 09:52:39 Shutter LASER close 09:52:39 Received message from Camera: op=State serial=138753 09:52:39 GetSingleValue result=40 Value=cccccccc 09:52:39 SkyScan query 09:52:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:52:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:40 Parameters OK 09:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:40 Set A/D data flow result=40 09:52:40 Set A/D channel type result=40 09:52:40 Set A/D encoding result=40 09:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:40 Set channel filter=0.000000e+000 result=40 09:52:40 Config A/D Result=40 09:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:40 Get A/D filter: -9.255963e+061 result=40 09:52:40 Get A/D value=-858993460 result=40 09:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:40 Parameters OK 09:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:40 Set A/D data flow result=40 09:52:40 Set A/D channel type result=40 09:52:40 Set A/D encoding result=40 09:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:40 Set channel filter=0.000000e+000 result=40 09:52:40 Config A/D Result=40 09:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:40 Get A/D filter: -9.255963e+061 result=40 09:52:40 Get A/D value=-858993460 result=40 09:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:40 Aux= 09:52:40 Message to Camera, serial 138753 queued 09:53:16 Received message from Master: op=PointingHead serial=138766 09:53:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:53:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:53:17 Point started: ret=0 09:53:17 point_skyscan result=0 09:53:17 Check angles 09:53:17 SkyScan query 09:53:18 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.255<-17417 Statuses=0009 0009 09:53:18 Msec=0 True Az=109.005 Ze=-81.255 Az status=0009 Ze status=0009 09:53:18 Check angles 09:53:18 SkyScan query 09:53:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.225<-18815 Statuses=0008 0009 09:53:19 Msec=750 True Az=112.995 Ze=-102.225 Az status=0008 Ze status=0009 09:53:19 Check angles 09:53:19 SkyScan query 09:53:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.165<-20211 Statuses=0008 0009 09:53:20 Msec=1500 True Az=112.995 Ze=-123.165 Az status=0008 Ze status=0009 09:53:20 Check angles 09:53:20 SkyScan query 09:53:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.12<-21608 Statuses=0008 0009 09:53:20 Msec=2250 True Az=112.995 Ze=-144.12 Az status=0008 Ze status=0009 09:53:20 Check angles 09:53:20 SkyScan query 09:53:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.06<-23004 Statuses=0008 0009 09:53:21 Msec=3000 True Az=112.995 Ze=-165.06 Az status=0008 Ze status=0009 09:53:21 Check angles 09:53:21 SkyScan query 09:53:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:53:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:53:22 Message to Master queued w/err=0: serial=138766 error=0 09:53:27 Received message from Master: op=Filter serial=138767 09:53:27 Color wheel filter change from 0 to 0 09:53:27 FLIGetFilterPos err=0 currentPosition=0 09:53:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:27 Filter is already there-color wheel unchanged 09:53:27 Received message from Master: op=Shutter serial=138768 09:53:27 Shutter LASER open 09:53:27 Received message from Camera: op=State serial=138770 09:53:27 GetSingleValue result=40 Value=cccccccc 09:53:27 SkyScan query 09:53:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:53:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:28 Parameters OK 09:53:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:28 Set A/D data flow result=40 09:53:28 Set A/D channel type result=40 09:53:28 Set A/D encoding result=40 09:53:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:28 Set channel filter=0.000000e+000 result=40 09:53:28 Config A/D Result=40 09:53:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:28 Get A/D filter: -9.255963e+061 result=40 09:53:28 Get A/D value=-858993460 result=40 09:53:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:28 Parameters OK 09:53:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:28 Set A/D data flow result=40 09:53:28 Set A/D channel type result=40 09:53:28 Set A/D encoding result=40 09:53:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:28 Set channel filter=0.000000e+000 result=40 09:53:28 Config A/D Result=40 09:53:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:28 Get A/D filter: -9.255963e+061 result=40 09:53:28 Get A/D value=-858993460 result=40 09:53:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:28 Aux= 09:53:28 Message to Camera, serial 138770 queued 09:53:36 Received message from Master: op=Shutter serial=138780 09:53:36 Shutter LASER close 09:53:37 Received message from Master: op=PointingHead serial=138784 09:53:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:53:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:53:37 Point started: ret=0 09:53:37 point_skyscan result=0 09:53:38 Check angles 09:53:38 SkyScan query 09:53:38 SkyScan query done: ret=0 az=89.985<-5999 ze=157.29<-1514 Statuses=0009 0009 09:53:38 Msec=0 True Az=89.985 Ze=157.29 Az status=0009 Ze status=0009 09:53:38 Check angles 09:53:38 SkyScan query 09:53:39 SkyScan query done: ret=0 az=72.015<-4801 ze=135.915<-2939 Statuses=0009 0009 09:53:39 Msec=750 True Az=72.015 Ze=135.915 Az status=0009 Ze status=0009 09:53:39 Check angles 09:53:39 SkyScan query 09:53:40 SkyScan query done: ret=0 az=54.705<-3647 ze=114.93<-4338 Statuses=0009 0009 09:53:40 Msec=1500 True Az=54.705 Ze=114.93 Az status=0009 Ze status=0009 09:53:40 Check angles 09:53:40 SkyScan query 09:53:41 SkyScan query done: ret=0 az=40.98<-2732 ze=93.99<-5734 Statuses=0009 0009 09:53:41 Msec=2250 True Az=40.98 Ze=93.99 Az status=0009 Ze status=0009 09:53:41 Check angles 09:53:41 SkyScan query 09:53:41 SkyScan query done: ret=0 az=40.995<-2733 ze=73.005<-7133 Statuses=0008 0009 09:53:41 Msec=3000 True Az=40.995 Ze=73.005 Az status=0008 Ze status=0009 09:53:41 Check angles 09:53:41 SkyScan query 09:53:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 09:53:42 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 09:53:42 Check angles 09:53:42 SkyScan query 09:53:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:53:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:53:43 Message to Master queued w/err=0: serial=138784 error=0 09:53:48 Received message from Master: op=Filter serial=138785 09:53:48 Color wheel filter change from 0 to 0 09:53:48 FLIGetFilterPos err=0 currentPosition=0 09:53:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:48 Filter is already there-color wheel unchanged 09:53:48 Received message from Master: op=Shutter serial=138786 09:53:48 Shutter LASER close 09:53:48 Received message from Camera: op=State serial=138788 09:53:48 GetSingleValue result=40 Value=cccccccc 09:53:48 SkyScan query 09:53:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:53:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:49 Parameters OK 09:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:49 Set A/D data flow result=40 09:53:49 Set A/D channel type result=40 09:53:49 Set A/D encoding result=40 09:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:49 Set channel filter=0.000000e+000 result=40 09:53:49 Config A/D Result=40 09:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:49 Get A/D filter: -9.255963e+061 result=40 09:53:49 Get A/D value=-858993460 result=40 09:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:49 Parameters OK 09:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:49 Set A/D data flow result=40 09:53:49 Set A/D channel type result=40 09:53:49 Set A/D encoding result=40 09:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:49 Set channel filter=0.000000e+000 result=40 09:53:49 Config A/D Result=40 09:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:49 Get A/D filter: -9.255963e+061 result=40 09:53:49 Get A/D value=-858993460 result=40 09:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:49 Aux= 09:53:49 Message to Camera, serial 138788 queued 09:54:26 Received message from Master: op=PointingHead serial=138801 09:54:26 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:54:26 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:54:26 Point started: ret=0 09:54:26 point_skyscan result=0 09:54:27 Check angles 09:54:27 SkyScan query 09:54:27 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 09:54:27 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 09:54:27 Check angles 09:54:27 SkyScan query 09:54:28 SkyScan query done: ret=0 az=81.75<-5450 ze=66.495<-7567 Statuses=0009 0008 09:54:28 Msec=750 True Az=81.75 Ze=66.495 Az status=0009 Ze status=0008 09:54:28 Check angles 09:54:28 SkyScan query 09:54:29 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 09:54:29 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 09:54:29 Check angles 09:54:29 SkyScan query 09:54:29 SkyScan query done: ret=0 az=117.06<-7804 ze=66.495<-7567 Statuses=0009 0008 09:54:29 Msec=2250 True Az=117.06 Ze=66.495 Az status=0009 Ze status=0008 09:54:30 Check angles 09:54:30 SkyScan query 09:54:30 SkyScan query done: ret=0 az=134.535<-8969 ze=66.495<-7567 Statuses=0009 0008 09:54:30 Msec=3000 True Az=134.535 Ze=66.495 Az status=0009 Ze status=0008 09:54:30 Check angles 09:54:30 SkyScan query 09:54:31 SkyScan query done: ret=0 az=152.265<-10151 ze=66.495<-7567 Statuses=0009 0008 09:54:31 Msec=3750 True Az=152.265 Ze=66.495 Az status=0009 Ze status=0008 09:54:31 Check angles 09:54:31 SkyScan query 09:54:32 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:54:32 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:54:32 Message to Master queued w/err=0: serial=138801 error=0 09:54:37 Received message from Master: op=Filter serial=138802 09:54:37 Color wheel filter change from 0 to 0 09:54:37 FLIGetFilterPos err=0 currentPosition=0 09:54:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:37 Filter is already there-color wheel unchanged 09:54:37 Received message from Master: op=Shutter serial=138803 09:54:37 Shutter LASER close 09:54:37 Received message from Camera: op=State serial=138805 09:54:37 GetSingleValue result=40 Value=cccccccc 09:54:37 SkyScan query 09:54:38 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:54:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:38 Parameters OK 09:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:38 Set A/D data flow result=40 09:54:38 Set A/D channel type result=40 09:54:38 Set A/D encoding result=40 09:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:38 Set channel filter=0.000000e+000 result=40 09:54:38 Config A/D Result=40 09:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:38 Get A/D filter: -9.255963e+061 result=40 09:54:38 Get A/D value=-858993460 result=40 09:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:38 Parameters OK 09:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:38 Set A/D data flow result=40 09:54:38 Set A/D channel type result=40 09:54:38 Set A/D encoding result=40 09:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:38 Set channel filter=0.000000e+000 result=40 09:54:38 Config A/D Result=40 09:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:38 Get A/D filter: -9.255963e+061 result=40 09:54:38 Get A/D value=-858993460 result=40 09:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:38 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:38 Aux= 09:54:38 Message to Camera, serial 138805 queued 09:55:14 Received message from Master: op=PointingHead serial=138818 09:55:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:55:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:55:15 Point started: ret=0 09:55:15 point_skyscan result=0 09:55:15 Check angles 09:55:15 SkyScan query 09:55:16 SkyScan query done: ret=0 az=134.79<-8986 ze=36.54<-9564 Statuses=0009 0009 09:55:16 Msec=0 True Az=134.79 Ze=36.54 Az status=0009 Ze status=0009 09:55:16 Check angles 09:55:16 SkyScan query 09:55:17 SkyScan query done: ret=0 az=117.285<-7819 ze=15.63<-10958 Statuses=0009 0009 09:55:17 Msec=750 True Az=117.285 Ze=15.63 Az status=0009 Ze status=0009 09:55:17 Check angles 09:55:17 SkyScan query 09:55:18 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.385<-12359 Statuses=0009 0009 09:55:18 Msec=1500 True Az=99.9 Ze=-5.385 Az status=0009 Ze status=0009 09:55:18 Check angles 09:55:18 SkyScan query 09:55:18 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.325<-13755 Statuses=0009 0009 09:55:18 Msec=2250 True Az=82.44 Ze=-26.325 Az status=0009 Ze status=0009 09:55:18 Check angles 09:55:18 SkyScan query 09:55:19 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.58<-14572 Statuses=0009 0008 09:55:19 Msec=3000 True Az=64.86 Ze=-38.58 Az status=0009 Ze status=0008 09:55:19 Check angles 09:55:19 SkyScan query 09:55:20 SkyScan query done: ret=0 az=47.49<-3166 ze=-38.52<-14568 Statuses=0009 0008 09:55:20 Msec=3750 True Az=47.49 Ze=-38.52 Az status=0009 Ze status=0008 09:55:20 Check angles 09:55:20 SkyScan query 09:55:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:55:21 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:55:21 Message to Master queued w/err=0: serial=138818 error=0 09:55:26 Received message from Master: op=Filter serial=138819 09:55:26 Color wheel filter change from 0 to 0 09:55:26 FLIGetFilterPos err=0 currentPosition=0 09:55:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:26 Filter is already there-color wheel unchanged 09:55:26 Received message from Master: op=Shutter serial=138820 09:55:26 Shutter LASER close 09:55:26 Received message from Camera: op=State serial=138822 09:55:26 GetSingleValue result=40 Value=cccccccc 09:55:26 SkyScan query 09:55:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:55:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:26 Parameters OK 09:55:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:26 Set A/D data flow result=40 09:55:26 Set A/D channel type result=40 09:55:26 Set A/D encoding result=40 09:55:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:26 Set channel filter=0.000000e+000 result=40 09:55:26 Config A/D Result=40 09:55:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:26 Get A/D filter: -9.255963e+061 result=40 09:55:26 Get A/D value=-858993460 result=40 09:55:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:26 Parameters OK 09:55:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:26 Set A/D data flow result=40 09:55:26 Set A/D channel type result=40 09:55:26 Set A/D encoding result=40 09:55:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:26 Set channel filter=0.000000e+000 result=40 09:55:26 Config A/D Result=40 09:55:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2018-12-14 09:55:26] 09:55:26 Get A/D filter: -9.255963e+061 result=40 09:55:26 Get A/D value=-858993460 result=40 09:55:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:26 Aux= 09:55:26 Message to Camera, serial 138822 queued [UTC 2018-12-14 09:55:52] 09:56:02 Received message from Master: op=PointingHead serial=138834 09:56:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:56:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:56:03 Point started: ret=0 09:56:03 point_skyscan result=0 09:56:03 Check angles 09:56:03 SkyScan query 09:56:04 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.025<-16535 Statuses=0009 0009 09:56:04 Msec=0 True Az=63.825 Ze=-68.025 Az status=0009 Ze status=0009 09:56:04 Check angles 09:56:04 SkyScan query 09:56:05 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.025<-17935 Statuses=0009 0009 09:56:05 Msec=750 True Az=81.39 Ze=-89.025 Az status=0009 Ze status=0009 09:56:05 Check angles 09:56:05 SkyScan query 09:56:05 SkyScan query done: ret=0 az=98.805<-6587 ze=-109.905<-19327 Statuses=0009 0009 09:56:05 Msec=1500 True Az=98.805 Ze=-109.905 Az status=0009 Ze status=0009 09:56:06 Check angles 09:56:06 SkyScan query 09:56:06 SkyScan query done: ret=0 az=116.28<-7752 ze=-130.92<-20728 Statuses=0009 0009 09:56:06 Msec=2250 True Az=116.28 Ze=-130.92 Az status=0009 Ze status=0009 09:56:06 Check angles 09:56:06 SkyScan query 09:56:07 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 09:56:07 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 09:56:07 Check angles 09:56:07 SkyScan query 09:56:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 09:56:08 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 09:56:08 Message to Master queued w/err=0: serial=138834 error=0 09:56:13 Received message from Master: op=Filter serial=138835 09:56:13 Color wheel filter change from 0 to 0 09:56:13 FLIGetFilterPos err=0 currentPosition=0 09:56:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:13 Filter is already there-color wheel unchanged 09:56:13 Received message from Master: op=Shutter serial=138836 09:56:13 Shutter LASER close 09:56:13 Received message from Camera: op=State serial=138838 09:56:13 GetSingleValue result=40 Value=cccccccc 09:56:13 SkyScan query 09:56:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:56:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:13 Parameters OK 09:56:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:13 Set A/D data flow result=40 09:56:13 Set A/D channel type result=40 09:56:13 Set A/D encoding result=40 09:56:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:13 Set channel filter=0.000000e+000 result=40 09:56:13 Config A/D Result=40 09:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:13 Get A/D filter: -9.255963e+061 result=40 09:56:13 Get A/D value=-858993460 result=40 09:56:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:13 Parameters OK 09:56:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:13 Set A/D data flow result=40 09:56:13 Set A/D channel type result=40 09:56:13 Set A/D encoding result=40 09:56:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:13 Set channel filter=0.000000e+000 result=40 09:56:13 Config A/D Result=40 09:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:13 Get A/D filter: -9.255963e+061 result=40 09:56:13 Get A/D value=-858993460 result=40 09:56:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:13 Aux= 09:56:13 Message to Camera, serial 138838 queued 09:56:50 Received message from Master: op=PointingHead serial=138851 09:56:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:56:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:56:51 Point started: ret=0 09:56:51 point_skyscan result=0 09:56:51 Check angles 09:56:51 SkyScan query 09:56:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0009 0009 09:56:52 Msec=0 True Az=112.995 Ze=-171.12 Az status=0009 Ze status=0009 09:56:52 Check angles 09:56:52 SkyScan query 09:56:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:56:53 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:56:53 Message to Master queued w/err=0: serial=138851 error=0 09:56:58 Received message from Master: op=Filter serial=138852 09:56:58 Color wheel filter change from 0 to 0 09:56:58 FLIGetFilterPos err=0 currentPosition=0 09:56:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:58 Filter is already there-color wheel unchanged 09:56:58 Received message from Master: op=Shutter serial=138853 09:56:58 Shutter LASER open 09:56:58 Received message from Camera: op=State serial=138855 09:56:58 GetSingleValue result=40 Value=cccccccc 09:56:58 SkyScan query 09:56:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:56:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:59 Parameters OK 09:56:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:59 Set A/D data flow result=40 09:56:59 Set A/D channel type result=40 09:56:59 Set A/D encoding result=40 09:56:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:59 Set channel filter=0.000000e+000 result=40 09:56:59 Config A/D Result=40 09:56:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:59 Get A/D filter: -9.255963e+061 result=40 09:56:59 Get A/D value=-858993460 result=40 09:56:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:59 Parameters OK 09:56:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:59 Set A/D data flow result=40 09:56:59 Set A/D channel type result=40 09:56:59 Set A/D encoding result=40 09:56:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:59 Set channel filter=0.000000e+000 result=40 09:56:59 Config A/D Result=40 09:56:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:59 Get A/D filter: -9.255963e+061 result=40 09:56:59 Get A/D value=-858993460 result=40 09:56:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:59 Aux= 09:56:59 Message to Camera, serial 138855 queued 09:57:07 Received message from Master: op=Shutter serial=138865 09:57:07 Shutter LASER close 09:57:08 Received message from Master: op=PointingHead serial=138869 09:57:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:57:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:57:08 Point started: ret=0 09:57:08 point_skyscan result=0 09:57:09 Check angles 09:57:09 SkyScan query 09:57:09 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.905<-21527 Statuses=0009 0009 09:57:09 Msec=0 True Az=136.365 Ze=-142.905 Az status=0009 Ze status=0009 09:57:10 Check angles 09:57:10 SkyScan query 09:57:10 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.95<-20130 Statuses=0009 0009 09:57:10 Msec=750 True Az=153.75 Ze=-121.95 Az status=0009 Ze status=0009 09:57:10 Check angles 09:57:10 SkyScan query 09:57:11 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.95<-18730 Statuses=0009 0009 09:57:11 Msec=1500 True Az=171.24 Ze=-100.95 Az status=0009 Ze status=0009 09:57:11 Check angles 09:57:11 SkyScan query 09:57:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.07<-17338 Statuses=0008 0009 09:57:12 Msec=2250 True Az=176.01 Ze=-80.07 Az status=0008 Ze status=0009 09:57:12 Check angles 09:57:12 SkyScan query 09:57:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.07<-15938 Statuses=0008 0009 09:57:12 Msec=3000 True Az=176.01 Ze=-59.07 Az status=0008 Ze status=0009 09:57:13 Check angles 09:57:13 SkyScan query 09:57:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:57:13 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:57:13 Message to Master queued w/err=0: serial=138869 error=0 09:57:18 Received message from Master: op=Filter serial=138870 09:57:18 Color wheel filter change from 0 to 0 09:57:18 FLIGetFilterPos err=0 currentPosition=0 09:57:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:18 Filter is already there-color wheel unchanged 09:57:18 Received message from Master: op=Shutter serial=138871 09:57:18 Shutter LASER close 09:57:18 Received message from Camera: op=State serial=138873 09:57:18 GetSingleValue result=40 Value=cccccccc 09:57:18 SkyScan query 09:57:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:57:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:19 Parameters OK 09:57:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:19 Set A/D data flow result=40 09:57:19 Set A/D channel type result=40 09:57:19 Set A/D encoding result=40 09:57:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:19 Set channel filter=0.000000e+000 result=40 09:57:19 Config A/D Result=40 09:57:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:19 Get A/D filter: -9.255963e+061 result=40 09:57:19 Get A/D value=-858993460 result=40 09:57:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:19 Parameters OK 09:57:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:19 Set A/D data flow result=40 09:57:19 Set A/D channel type result=40 09:57:19 Set A/D encoding result=40 09:57:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:19 Set channel filter=0.000000e+000 result=40 09:57:19 Config A/D Result=40 09:57:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:19 Get A/D filter: -9.255963e+061 result=40 09:57:19 Get A/D value=-858993460 result=40 09:57:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:19 Aux= 09:57:19 Message to Camera, serial 138873 queued 09:57:56 Received message from Master: op=PointingHead serial=138886 09:57:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:57:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:57:56 Point started: ret=0 09:57:56 point_skyscan result=0 09:57:57 Check angles 09:57:57 SkyScan query 09:57:58 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.63<-13442 Statuses=0009 0009 09:57:58 Msec=0 True Az=152.91 Ze=-21.63 Az status=0009 Ze status=0009 09:57:58 Check angles 09:57:58 SkyScan query 09:57:58 SkyScan query done: ret=0 az=135.045<-9003 ze=-0.21<-12014 Statuses=0009 0009 09:57:58 Msec=750 True Az=135.045 Ze=-0.21 Az status=0009 Ze status=0009 09:57:59 Check angles 09:57:59 SkyScan query 09:57:59 SkyScan query done: ret=0 az=117.54<-7836 ze=20.745<-10617 Statuses=0009 0009 09:57:59 Msec=1500 True Az=117.54 Ze=20.745 Az status=0009 Ze status=0009 09:57:59 Check angles 09:57:59 SkyScan query 09:58:00 SkyScan query done: ret=0 az=100.185<-6679 ze=41.715<-9219 Statuses=0009 0009 09:58:00 Msec=2250 True Az=100.185 Ze=41.715 Az status=0009 Ze status=0009 09:58:00 Check angles 09:58:00 SkyScan query 09:58:01 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:58:01 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:58:01 Check angles 09:58:01 SkyScan query 09:58:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:58:01 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:58:01 Message to Master queued w/err=0: serial=138886 error=0 09:58:06 Received message from Master: op=Filter serial=138887 09:58:06 Color wheel filter change from 0 to 0 09:58:06 FLIGetFilterPos err=0 currentPosition=0 09:58:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:06 Filter is already there-color wheel unchanged 09:58:07 Received message from Master: op=Shutter serial=138888 09:58:07 Shutter LASER close 09:58:07 Received message from Camera: op=State serial=138890 09:58:07 GetSingleValue result=40 Value=cccccccc 09:58:07 SkyScan query 09:58:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:58:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:07 Parameters OK 09:58:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:07 Set A/D data flow result=40 09:58:07 Set A/D channel type result=40 09:58:07 Set A/D encoding result=40 09:58:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:07 Set channel filter=0.000000e+000 result=40 09:58:07 Config A/D Result=40 09:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:07 Get A/D filter: -9.255963e+061 result=40 09:58:07 Get A/D value=-858993460 result=40 09:58:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:07 Parameters OK 09:58:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:07 Set A/D data flow result=40 09:58:07 Set A/D channel type result=40 09:58:07 Set A/D encoding result=40 09:58:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:07 Set channel filter=0.000000e+000 result=40 09:58:07 Config A/D Result=40 09:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:07 Get A/D filter: -9.255963e+061 result=40 09:58:07 Get A/D value=-858993460 result=40 09:58:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:07 Aux= 09:58:07 Message to Camera, serial 138890 queued 09:58:44 Received message from Master: op=PointingHead serial=138903 09:58:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:58:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:58:44 Point started: ret=0 09:58:44 point_skyscan result=0 09:58:45 Check angles 09:58:45 SkyScan query 09:58:46 SkyScan query done: ret=0 az=109.095<-7273 ze=38.49<-9434 Statuses=0009 0008 09:58:46 Msec=0 True Az=109.095 Ze=38.49 Az status=0009 Ze status=0008 09:58:46 Check angles 09:58:46 SkyScan query 09:58:46 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 09:58:46 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 09:58:47 Check angles 09:58:47 SkyScan query 09:58:47 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 09:58:47 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 09:58:47 Check angles 09:58:47 SkyScan query 09:58:48 SkyScan query done: ret=0 az=161.895<-10793 ze=38.505<-9433 Statuses=0009 0008 09:58:48 Msec=2250 True Az=161.895 Ze=38.505 Az status=0009 Ze status=0008 09:58:48 Check angles 09:58:48 SkyScan query 09:58:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:58:49 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:58:49 Check angles 09:58:49 SkyScan query 09:58:49 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:58:49 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:58:49 Message to Master queued w/err=0: serial=138903 error=0 09:58:54 Received message from Master: op=Filter serial=138904 09:58:54 Color wheel filter change from 0 to 0 09:58:54 FLIGetFilterPos err=0 currentPosition=0 09:58:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:54 Filter is already there-color wheel unchanged 09:58:55 Received message from Master: op=Shutter serial=138905 09:58:55 Shutter LASER close 09:58:55 Received message from Camera: op=State serial=138907 09:58:55 GetSingleValue result=40 Value=cccccccc 09:58:55 SkyScan query 09:58:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:58:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:55 Parameters OK 09:58:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:55 Set A/D data flow result=40 09:58:55 Set A/D channel type result=40 09:58:55 Set A/D encoding result=40 09:58:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:55 Set channel filter=0.000000e+000 result=40 09:58:55 Config A/D Result=40 09:58:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:55 Get A/D filter: -9.255963e+061 result=40 09:58:55 Get A/D value=-858993460 result=40 09:58:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:55 Parameters OK 09:58:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:55 Set A/D data flow result=40 09:58:55 Set A/D channel type result=40 09:58:55 Set A/D encoding result=40 09:58:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:55 Set channel filter=0.000000e+000 result=40 09:58:55 Config A/D Result=40 09:58:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:55 Get A/D filter: -9.255963e+061 result=40 09:58:55 Get A/D value=-858993460 result=40 09:58:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:55 Aux= 09:58:55 Message to Camera, serial 138907 queued 09:59:32 Received message from Master: op=PointingHead serial=138920 09:59:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:59:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:59:32 Point started: ret=0 09:59:32 point_skyscan result=0 09:59:33 Check angles 09:59:33 SkyScan query 09:59:34 SkyScan query done: ret=0 az=152.925<-10195 ze=8.58<-11428 Statuses=0009 0009 09:59:34 Msec=0 True Az=152.925 Ze=8.58 Az status=0009 Ze status=0009 09:59:34 Check angles 09:59:34 SkyScan query 09:59:34 SkyScan query done: ret=0 az=135.51<-9034 ze=-12.375<-12825 Statuses=0009 0009 09:59:34 Msec=750 True Az=135.51 Ze=-12.375 Az status=0009 Ze status=0009 09:59:35 Check angles 09:59:35 SkyScan query 09:59:35 SkyScan query done: ret=0 az=117.975<-7865 ze=-33.33<-14222 Statuses=0009 0009 09:59:35 Msec=1500 True Az=117.975 Ze=-33.33 Az status=0009 Ze status=0009 09:59:35 Check angles 09:59:35 SkyScan query 09:59:36 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.57<-15438 Statuses=0009 0009 09:59:36 Msec=2250 True Az=100.215 Ze=-51.57 Az status=0009 Ze status=0009 09:59:36 Check angles 09:59:36 SkyScan query 09:59:37 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 09:59:37 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 09:59:37 Check angles 09:59:37 SkyScan query 09:59:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:59:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:59:38 Message to Master queued w/err=0: serial=138920 error=0 09:59:43 Received message from Master: op=Filter serial=138921 09:59:43 Color wheel filter change from 0 to 0 09:59:43 FLIGetFilterPos err=0 currentPosition=0 09:59:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:59:43 Filter is already there-color wheel unchanged 09:59:43 Received message from Master: op=Shutter serial=138922 09:59:43 Shutter LASER close 09:59:43 Received message from Camera: op=State serial=138924 09:59:43 GetSingleValue result=40 Value=cccccccc 09:59:43 SkyScan query 09:59:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:59:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:43 Parameters OK 09:59:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:43 Set A/D data flow result=40 09:59:43 Set A/D channel type result=40 09:59:43 Set A/D encoding result=40 09:59:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:43 Set channel filter=0.000000e+000 result=40 09:59:43 Config A/D Result=40 09:59:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:43 Get A/D filter: -9.255963e+061 result=40 09:59:43 Get A/D value=-858993460 result=40 09:59:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:43 Parameters OK 09:59:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:43 Set A/D data flow result=40 09:59:43 Set A/D channel type result=40 09:59:43 Set A/D encoding result=40 09:59:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:43 Set channel filter=0.000000e+000 result=40 09:59:43 Config A/D Result=40 09:59:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:43 Get A/D filter: -9.255963e+061 result=40 09:59:43 Get A/D value=-858993460 result=40 09:59:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:43 Aux= 09:59:43 Message to Camera, serial 138924 queued 10:00:19 Received message from Master: op=PointingHead serial=138936 10:00:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:00:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:00:20 Point started: ret=0 10:00:20 point_skyscan result=0 10:00:20 Check angles 10:00:20 SkyScan query 10:00:21 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.39<-17426 Statuses=0009 0009 10:00:21 Msec=0 True Az=109.125 Ze=-81.39 Az status=0009 Ze status=0009 10:00:21 Check angles 10:00:21 SkyScan query 10:00:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.345<-18823 Statuses=0008 0009 10:00:22 Msec=750 True Az=112.995 Ze=-102.345 Az status=0008 Ze status=0009 10:00:22 Check angles 10:00:22 SkyScan query 10:00:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.735<-20249 Statuses=0008 0009 10:00:22 Msec=1500 True Az=112.995 Ze=-123.735 Az status=0008 Ze status=0009 10:00:23 Check angles 10:00:23 SkyScan query 10:00:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 10:00:23 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 10:00:23 Check angles 10:00:23 SkyScan query 10:00:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.615<-23041 Statuses=0008 0009 10:00:24 Msec=3000 True Az=112.995 Ze=-165.615 Az status=0008 Ze status=0009 10:00:24 Check angles 10:00:24 SkyScan query 10:00:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:00:25 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:00:25 Message to Master queued w/err=0: serial=138936 error=0 10:00:30 Received message from Master: op=Filter serial=138937 10:00:30 Color wheel filter change from 0 to 0 10:00:30 FLIGetFilterPos err=0 currentPosition=0 10:00:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:30 Filter is already there-color wheel unchanged 10:00:30 Received message from Master: op=Shutter serial=138938 10:00:30 Shutter LASER open 10:00:30 Received message from Camera: op=State serial=138940 10:00:30 GetSingleValue result=40 Value=cccccccc 10:00:30 SkyScan query 10:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:00:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:31 Parameters OK 10:00:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:31 Set A/D data flow result=40 10:00:31 Set A/D channel type result=40 10:00:31 Set A/D encoding result=40 10:00:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:31 Set channel filter=0.000000e+000 result=40 10:00:31 Config A/D Result=40 10:00:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:31 Get A/D filter: -9.255963e+061 result=40 10:00:31 Get A/D value=-858993460 result=40 10:00:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:31 Parameters OK 10:00:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:31 Set A/D data flow result=40 10:00:31 Set A/D channel type result=40 10:00:31 Set A/D encoding result=40 10:00:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:31 Set channel filter=0.000000e+000 result=40 10:00:31 Config A/D Result=40 10:00:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:31 Get A/D filter: -9.255963e+061 result=40 10:00:31 Get A/D value=-858993460 result=40 10:00:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:31 Aux= 10:00:31 Message to Camera, serial 138940 queued 10:00:39 Received message from Master: op=Shutter serial=138950 10:00:39 Shutter LASER close 10:00:39 Received message from Master: op=PointingHead serial=138954 10:00:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:00:39 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:00:40 Point started: ret=0 10:00:40 point_skyscan result=0 10:00:41 Check angles 10:00:41 SkyScan query 10:00:41 SkyScan query done: ret=0 az=89.805<-5987 ze=157.155<-1523 Statuses=0009 0009 10:00:41 Msec=0 True Az=89.805 Ze=157.155 Az status=0009 Ze status=0009 10:00:41 Check angles 10:00:41 SkyScan query 10:00:42 SkyScan query done: ret=0 az=71.97<-4798 ze=135.765<-2949 Statuses=0009 0009 10:00:42 Msec=750 True Az=71.97 Ze=135.765 Az status=0009 Ze status=0009 10:00:42 Check angles 10:00:42 SkyScan query 10:00:43 SkyScan query done: ret=0 az=54.525<-3635 ze=114.765<-4349 Statuses=0009 0009 10:00:43 Msec=1500 True Az=54.525 Ze=114.765 Az status=0009 Ze status=0009 10:00:43 Check angles 10:00:43 SkyScan query 10:00:43 SkyScan query done: ret=0 az=40.98<-2732 ze=93.825<-5745 Statuses=0009 0009 10:00:43 Msec=2250 True Az=40.98 Ze=93.825 Az status=0009 Ze status=0009 10:00:44 Check angles 10:00:44 SkyScan query 10:00:44 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 10:00:44 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 10:00:44 Check angles 10:00:44 SkyScan query 10:00:45 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 10:00:45 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 10:00:45 Check angles 10:00:45 SkyScan query 10:00:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:00:46 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:00:46 Message to Master queued w/err=0: serial=138954 error=0 10:00:51 Received message from Master: op=Filter serial=138955 10:00:51 Color wheel filter change from 0 to 0 10:00:51 FLIGetFilterPos err=0 currentPosition=0 10:00:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:51 Filter is already there-color wheel unchanged 10:00:51 Received message from Master: op=Shutter serial=138956 10:00:51 Shutter LASER close 10:00:51 Received message from Camera: op=State serial=138958 10:00:51 GetSingleValue result=40 Value=cccccccc 10:00:51 SkyScan query 10:00:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:00:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:52 Parameters OK 10:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:52 Set A/D data flow result=40 10:00:52 Set A/D channel type result=40 10:00:52 Set A/D encoding result=40 10:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:52 Set channel filter=0.000000e+000 result=40 10:00:52 Config A/D Result=40 10:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:52 Get A/D filter: -9.255963e+061 result=40 10:00:52 Get A/D value=-858993460 result=40 10:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:52 Parameters OK 10:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:52 Set A/D data flow result=40 10:00:52 Set A/D channel type result=40 10:00:52 Set A/D encoding result=40 10:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:52 Set channel filter=0.000000e+000 result=40 10:00:52 Config A/D Result=40 10:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:52 Get A/D filter: -9.255963e+061 result=40 10:00:52 Get A/D value=-858993460 result=40 10:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:52 Aux= 10:00:52 Message to Camera, serial 138958 queued 10:01:28 Received message from Master: op=PointingHead serial=138971 10:01:28 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:01:28 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:01:29 Point started: ret=0 10:01:29 point_skyscan result=0 10:01:30 Check angles 10:01:30 SkyScan query 10:01:30 SkyScan query done: ret=0 az=63.915<-4261 ze=66.54<-7564 Statuses=0009 0008 10:01:30 Msec=0 True Az=63.915 Ze=66.54 Az status=0009 Ze status=0008 10:01:30 Check angles 10:01:30 SkyScan query 10:01:31 SkyScan query done: ret=0 az=81.39<-5426 ze=66.51<-7566 Statuses=0009 0008 10:01:31 Msec=750 True Az=81.39 Ze=66.51 Az status=0009 Ze status=0008 10:01:31 Check angles 10:01:31 SkyScan query 10:01:32 SkyScan query done: ret=0 az=98.82<-6588 ze=66.495<-7567 Statuses=0009 0008 10:01:32 Msec=1500 True Az=98.82 Ze=66.495 Az status=0009 Ze status=0008 10:01:32 Check angles 10:01:32 SkyScan query 10:01:32 SkyScan query done: ret=0 az=116.325<-7755 ze=66.495<-7567 Statuses=0009 0008 10:01:32 Msec=2250 True Az=116.325 Ze=66.495 Az status=0009 Ze status=0008 10:01:33 Check angles 10:01:33 SkyScan query 10:01:33 SkyScan query done: ret=0 az=134.22<-8948 ze=66.495<-7567 Statuses=0009 0008 10:01:33 Msec=3000 True Az=134.22 Ze=66.495 Az status=0009 Ze status=0008 10:01:33 Check angles 10:01:33 SkyScan query 10:01:34 SkyScan query done: ret=0 az=151.575<-10105 ze=66.495<-7567 Statuses=0009 0008 10:01:34 Msec=3750 True Az=151.575 Ze=66.495 Az status=0009 Ze status=0008 10:01:34 Check angles 10:01:34 SkyScan query 10:01:35 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:01:35 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:01:35 Message to Master queued w/err=0: serial=138971 error=0 10:01:40 Received message from Master: op=Filter serial=138972 10:01:40 Color wheel filter change from 0 to 0 10:01:40 FLIGetFilterPos err=0 currentPosition=0 10:01:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:40 Filter is already there-color wheel unchanged 10:01:40 Received message from Master: op=Shutter serial=138973 10:01:40 Shutter LASER close 10:01:40 Received message from Camera: op=State serial=138975 10:01:40 GetSingleValue result=40 Value=cccccccc 10:01:40 SkyScan query 10:01:40 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:01:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:40 Parameters OK 10:01:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:40 Set A/D data flow result=40 10:01:40 Set A/D channel type result=40 10:01:40 Set A/D encoding result=40 10:01:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:40 Set channel filter=0.000000e+000 result=40 10:01:40 Config A/D Result=40 10:01:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:40 Get A/D filter: -9.255963e+061 result=40 10:01:40 Get A/D value=-858993460 result=40 10:01:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:40 Parameters OK 10:01:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:40 Set A/D data flow result=40 10:01:40 Set A/D channel type result=40 10:01:40 Set A/D encoding result=40 10:01:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:40 Set channel filter=0.000000e+000 result=40 10:01:40 Config A/D Result=40 10:01:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:40 Get A/D filter: -9.255963e+061 result=40 10:01:40 Get A/D value=-858993460 result=40 10:01:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:40 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:40 Aux= 10:01:40 Message to Camera, serial 138975 queued 10:02:17 Received message from Master: op=PointingHead serial=138988 10:02:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:02:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:02:18 Point started: ret=0 10:02:18 point_skyscan result=0 10:02:18 Check angles 10:02:18 SkyScan query 10:02:19 SkyScan query done: ret=0 az=134.97<-8998 ze=36.84<-9544 Statuses=0009 0009 10:02:19 Msec=0 True Az=134.97 Ze=36.84 Az status=0009 Ze status=0009 10:02:19 Check angles 10:02:19 SkyScan query 10:02:20 SkyScan query done: ret=0 az=117.105<-7807 ze=15.48<-10968 Statuses=0009 0009 10:02:20 Msec=750 True Az=117.105 Ze=15.48 Az status=0009 Ze status=0009 10:02:20 Check angles 10:02:20 SkyScan query 10:02:20 SkyScan query done: ret=0 az=99.81<-6654 ze=-5.535<-12369 Statuses=0009 0009 10:02:20 Msec=1500 True Az=99.81 Ze=-5.535 Az status=0009 Ze status=0009 10:02:21 Check angles 10:02:21 SkyScan query 10:02:21 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.445<-13763 Statuses=0009 0009 10:02:21 Msec=2250 True Az=82.23 Ze=-26.445 Az status=0009 Ze status=0009 10:02:21 Check angles 10:02:21 SkyScan query 10:02:22 SkyScan query done: ret=0 az=64.74<-4316 ze=-38.58<-14572 Statuses=0009 0008 10:02:22 Msec=3000 True Az=64.74 Ze=-38.58 Az status=0009 Ze status=0008 10:02:22 Check angles 10:02:22 SkyScan query 10:02:23 SkyScan query done: ret=0 az=47.28<-3152 ze=-38.535<-14569 Statuses=0009 0008 10:02:23 Msec=3750 True Az=47.28 Ze=-38.535 Az status=0009 Ze status=0008 10:02:23 Check angles 10:02:23 SkyScan query 10:02:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:02:23 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:02:23 Message to Master queued w/err=0: serial=138988 error=0 10:02:28 Received message from Master: op=Filter serial=138989 10:02:28 Color wheel filter change from 0 to 0 10:02:28 FLIGetFilterPos err=0 currentPosition=0 10:02:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:28 Filter is already there-color wheel unchanged 10:02:29 Received message from Master: op=Shutter serial=138990 10:02:29 Shutter LASER close 10:02:29 Received message from Camera: op=State serial=138992 10:02:29 GetSingleValue result=40 Value=cccccccc 10:02:29 SkyScan query 10:02:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:02:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:29 Parameters OK 10:02:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:29 Set A/D data flow result=40 10:02:29 Set A/D channel type result=40 10:02:29 Set A/D encoding result=40 10:02:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:29 Set channel filter=0.000000e+000 result=40 10:02:29 Config A/D Result=40 10:02:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:29 Get A/D filter: -9.255963e+061 result=40 10:02:29 Get A/D value=-858993460 result=40 10:02:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:29 Parameters OK 10:02:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:29 Set A/D data flow result=40 10:02:29 Set A/D channel type result=40 10:02:29 Set A/D encoding result=40 10:02:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:29 Set channel filter=0.000000e+000 result=40 10:02:29 Config A/D Result=40 10:02:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:29 Get A/D filter: -9.255963e+061 result=40 10:02:29 Get A/D value=-858993460 result=40 10:02:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:29 Aux= 10:02:29 Message to Camera, serial 138992 queued 10:03:06 Received message from Master: op=PointingHead serial=139005 10:03:06 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:03:06 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:03:06 Point started: ret=0 10:03:06 point_skyscan result=0 10:03:07 Check angles 10:03:07 SkyScan query 10:03:08 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.25<-16550 Statuses=0009 0009 10:03:08 Msec=0 True Az=63.96 Ze=-68.25 Az status=0009 Ze status=0009 10:03:08 Check angles 10:03:08 SkyScan query 10:03:08 SkyScan query done: ret=0 az=81.45<-5430 ze=-89.235<-17949 Statuses=0009 0009 10:03:08 Msec=750 True Az=81.45 Ze=-89.235 Az status=0009 Ze status=0009 10:03:09 Check angles 10:03:09 SkyScan query 10:03:09 SkyScan query done: ret=0 az=99.21<-6614 ze=-110.655<-19377 Statuses=0009 0009 10:03:09 Msec=1500 True Az=99.21 Ze=-110.655 Az status=0009 Ze status=0009 10:03:09 Check angles 10:03:09 SkyScan query 10:03:10 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.535<-20769 Statuses=0009 0009 10:03:10 Msec=2250 True Az=116.76 Ze=-131.535 Az status=0009 Ze status=0009 10:03:10 Check angles 10:03:10 SkyScan query 10:03:11 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 10:03:11 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 10:03:11 Check angles 10:03:11 SkyScan query 10:03:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 10:03:12 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 10:03:12 Message to Master queued w/err=0: serial=139005 error=0 10:03:17 Received message from Master: op=Filter serial=139006 10:03:17 Color wheel filter change from 0 to 0 10:03:17 FLIGetFilterPos err=0 currentPosition=0 10:03:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:17 Filter is already there-color wheel unchanged 10:03:17 Received message from Master: op=Shutter serial=139007 10:03:17 Shutter LASER close 10:03:17 Received message from Camera: op=State serial=139009 10:03:17 GetSingleValue result=40 Value=cccccccc 10:03:17 SkyScan query 10:03:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:03:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:17 Parameters OK 10:03:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:17 Set A/D data flow result=40 10:03:17 Set A/D channel type result=40 10:03:17 Set A/D encoding result=40 10:03:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:17 Set channel filter=0.000000e+000 result=40 10:03:17 Config A/D Result=40 10:03:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:17 Get A/D filter: -9.255963e+061 result=40 10:03:17 Get A/D value=-858993460 result=40 10:03:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:17 Parameters OK 10:03:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:17 Set A/D data flow result=40 10:03:17 Set A/D channel type result=40 10:03:17 Set A/D encoding result=40 10:03:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:17 Set channel filter=0.000000e+000 result=40 10:03:17 Config A/D Result=40 10:03:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:17 Get A/D filter: -9.255963e+061 result=40 10:03:17 Get A/D value=-858993460 result=40 10:03:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:17 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:17 Aux= 10:03:17 Message to Camera, serial 139009 queued 10:03:54 Received message from Master: op=PointingHead serial=139022 10:03:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:03:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:03:54 Point started: ret=0 10:03:54 point_skyscan result=0 10:03:55 Check angles 10:03:55 SkyScan query 10:03:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.85<-23390 Statuses=0009 0009 10:03:56 Msec=0 True Az=113.01 Ze=-170.85 Az status=0009 Ze status=0009 10:03:56 Check angles 10:03:56 SkyScan query 10:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:03:57 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:03:57 Message to Master queued w/err=0: serial=139022 error=0 10:04:02 Received message from Master: op=Filter serial=139023 10:04:02 Color wheel filter change from 0 to 0 10:04:02 FLIGetFilterPos err=0 currentPosition=0 10:04:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:02 Filter is already there-color wheel unchanged 10:04:02 Received message from Master: op=Shutter serial=139024 10:04:02 Shutter LASER open 10:04:02 Received message from Camera: op=State serial=139026 10:04:02 GetSingleValue result=40 Value=cccccccc 10:04:02 SkyScan query 10:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:04:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:02 Parameters OK 10:04:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:02 Set A/D data flow result=40 10:04:02 Set A/D channel type result=40 10:04:02 Set A/D encoding result=40 10:04:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:02 Set channel filter=0.000000e+000 result=40 10:04:02 Config A/D Result=40 10:04:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:02 Get A/D filter: -9.255963e+061 result=40 10:04:02 Get A/D value=-858993460 result=40 10:04:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:02 Parameters OK 10:04:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:02 Set A/D data flow result=40 10:04:02 Set A/D channel type result=40 10:04:02 Set A/D encoding result=40 10:04:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:02 Set channel filter=0.000000e+000 result=40 10:04:02 Config A/D Result=40 10:04:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:02 Get A/D filter: -9.255963e+061 result=40 10:04:02 Get A/D value=-858993460 result=40 10:04:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:02 Aux= 10:04:02 Message to Camera, serial 139026 queued 10:04:11 Received message from Master: op=Shutter serial=139036 10:04:11 Shutter LASER close 10:04:11 Received message from Master: op=PointingHead serial=139040 10:04:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:04:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:04:12 Point started: ret=0 10:04:12 point_skyscan result=0 10:04:13 Check angles 10:04:13 SkyScan query 10:04:13 SkyScan query done: ret=0 az=136.425<-9095 ze=-142.71<-21514 Statuses=0009 0009 10:04:13 Msec=0 True Az=136.425 Ze=-142.71 Az status=0009 Ze status=0009 10:04:13 Check angles 10:04:13 SkyScan query 10:04:14 SkyScan query done: ret=0 az=153.87<-10258 ze=-121.77<-20118 Statuses=0009 0009 10:04:14 Msec=750 True Az=153.87 Ze=-121.77 Az status=0009 Ze status=0009 10:04:14 Check angles 10:04:14 SkyScan query 10:04:15 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.74<-18716 Statuses=0009 0009 10:04:15 Msec=1500 True Az=171.465 Ze=-100.74 Az status=0009 Ze status=0009 10:04:15 Check angles 10:04:15 SkyScan query 10:04:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.395<-17293 Statuses=0008 0009 10:04:15 Msec=2250 True Az=176.01 Ze=-79.395 Az status=0008 Ze status=0009 10:04:16 Check angles 10:04:16 SkyScan query 10:04:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.425<-15895 Statuses=0008 0009 10:04:16 Msec=3000 True Az=176.01 Ze=-58.425 Az status=0008 Ze status=0009 10:04:16 Check angles 10:04:16 SkyScan query 10:04:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:04:17 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:04:17 Message to Master queued w/err=0: serial=139040 error=0 10:04:22 Received message from Master: op=Filter serial=139041 10:04:22 Color wheel filter change from 0 to 0 10:04:22 FLIGetFilterPos err=0 currentPosition=0 10:04:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:22 Filter is already there-color wheel unchanged 10:04:22 Received message from Master: op=Shutter serial=139042 10:04:22 Shutter LASER close 10:04:22 Received message from Camera: op=State serial=139044 10:04:22 GetSingleValue result=40 Value=cccccccc 10:04:22 SkyScan query 10:04:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:04:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:23 Parameters OK 10:04:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:23 Set A/D data flow result=40 10:04:23 Set A/D channel type result=40 10:04:23 Set A/D encoding result=40 10:04:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:23 Set channel filter=0.000000e+000 result=40 10:04:23 Config A/D Result=40 10:04:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:23 Get A/D filter: -9.255963e+061 result=40 10:04:23 Get A/D value=-858993460 result=40 10:04:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:23 Parameters OK 10:04:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:23 Set A/D data flow result=40 10:04:23 Set A/D channel type result=40 10:04:23 Set A/D encoding result=40 10:04:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:23 Set channel filter=0.000000e+000 result=40 10:04:23 Config A/D Result=40 10:04:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:23 Get A/D filter: -9.255963e+061 result=40 10:04:23 Get A/D value=-858993460 result=40 10:04:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:23 Aux= 10:04:23 Message to Camera, serial 139044 queued 10:05:00 Received message from Master: op=PointingHead serial=139057 10:05:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:05:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:05:00 Point started: ret=0 10:05:00 point_skyscan result=0 10:05:01 Check angles 10:05:01 SkyScan query 10:05:01 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.69<-13446 Statuses=0009 0009 10:05:01 Msec=0 True Az=152.955 Ze=-21.69 Az status=0009 Ze status=0009 10:05:02 Check angles 10:05:02 SkyScan query 10:05:02 SkyScan query done: ret=0 az=135.525<-9035 ze=-0.72<-12048 Statuses=0009 0009 10:05:02 Msec=750 True Az=135.525 Ze=-0.72 Az status=0009 Ze status=0009 10:05:02 Check angles 10:05:02 SkyScan query 10:05:03 SkyScan query done: ret=0 az=117.48<-7832 ze=20.67<-10622 Statuses=0009 0009 10:05:03 Msec=1500 True Az=117.48 Ze=20.67 Az status=0009 Ze status=0009 10:05:03 Check angles 10:05:03 SkyScan query 10:05:04 SkyScan query done: ret=0 az=99.75<-6650 ze=42.03<-9198 Statuses=0009 0009 10:05:04 Msec=2250 True Az=99.75 Ze=42.03 Az status=0009 Ze status=0009 10:05:04 Check angles 10:05:04 SkyScan query 10:05:04 SkyScan query done: ret=0 az=86.01<-5734 ze=51.525<-8565 Statuses=0009 0008 10:05:04 Msec=3000 True Az=86.01 Ze=51.525 Az status=0009 Ze status=0008 10:05:05 Check angles 10:05:05 SkyScan query 10:05:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:05:05 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 10:05:05 Message to Master queued w/err=0: serial=139057 error=0 10:05:10 Received message from Master: op=Filter serial=139058 10:05:10 Color wheel filter change from 0 to 0 10:05:10 FLIGetFilterPos err=0 currentPosition=0 10:05:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:10 Filter is already there-color wheel unchanged 10:05:10 Received message from Master: op=Shutter serial=139059 10:05:10 Shutter LASER close 10:05:10 Received message from Camera: op=State serial=139061 10:05:10 GetSingleValue result=40 Value=cccccccc 10:05:10 SkyScan query 10:05:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 10:05:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:11 Parameters OK 10:05:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:11 Set A/D data flow result=40 10:05:11 Set A/D channel type result=40 10:05:11 Set A/D encoding result=40 10:05:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:11 Set channel filter=0.000000e+000 result=40 10:05:11 Config A/D Result=40 10:05:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:11 Get A/D filter: -9.255963e+061 result=40 10:05:11 Get A/D value=-858993460 result=40 10:05:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:11 Parameters OK 10:05:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:11 Set A/D data flow result=40 10:05:11 Set A/D channel type result=40 10:05:11 Set A/D encoding result=40 10:05:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:11 Set channel filter=0.000000e+000 result=40 10:05:11 Config A/D Result=40 10:05:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:11 Get A/D filter: -9.255963e+061 result=40 10:05:11 Get A/D value=-858993460 result=40 10:05:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:11 Aux= 10:05:11 Message to Camera, serial 139061 queued 10:05:48 Received message from Master: op=PointingHead serial=139074 10:05:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:05:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:05:48 Point started: ret=0 10:05:48 point_skyscan result=0 10:05:49 Check angles 10:05:49 SkyScan query 10:05:50 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 10:05:50 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 10:05:50 Check angles 10:05:50 SkyScan query 10:05:50 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 10:05:50 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 10:05:50 Check angles 10:05:50 SkyScan query 10:05:51 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 10:05:51 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 10:05:51 Check angles 10:05:51 SkyScan query [UTC 2018-12-14 10:05:52] 10:05:52 SkyScan query done: ret=0 az=161.22<-10748 ze=38.505<-9433 Statuses=0009 0008 10:05:52 Msec=2250 True Az=161.22 Ze=38.505 Az status=0009 Ze status=0008 10:05:52 Check angles 10:05:52 SkyScan query 10:05:53 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:05:53 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:05:53 Check angles 10:05:53 SkyScan query 10:05:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:05:53 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:05:53 Message to Master queued w/err=0: serial=139074 error=0 10:05:58 Received message from Master: op=Filter serial=139075 10:05:58 Color wheel filter change from 0 to 0 10:05:58 FLIGetFilterPos err=0 currentPosition=0 10:05:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:58 Filter is already there-color wheel unchanged 10:05:58 Received message from Master: op=Shutter serial=139076 10:05:58 Shutter LASER close 10:05:58 Received message from Camera: op=State serial=139078 10:05:58 GetSingleValue result=40 Value=cccccccc 10:05:58 SkyScan query 10:05:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:05:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:59 Parameters OK 10:05:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:59 Set A/D data flow result=40 10:05:59 Set A/D channel type result=40 10:05:59 Set A/D encoding result=40 10:05:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:59 Set channel filter=0.000000e+000 result=40 10:05:59 Config A/D Result=40 10:05:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:59 Get A/D filter: -9.255963e+061 result=40 10:05:59 Get A/D value=-858993460 result=40 10:05:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:59 Parameters OK 10:05:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:59 Set A/D data flow result=40 10:05:59 Set A/D channel type result=40 10:05:59 Set A/D encoding result=40 10:05:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:59 Set channel filter=0.000000e+000 result=40 10:05:59 Config A/D Result=40 10:05:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:59 Get A/D filter: -9.255963e+061 result=40 10:05:59 Get A/D value=-858993460 result=40 10:05:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:59 Aux= 10:05:59 Message to Camera, serial 139078 queued 10:06:36 Received message from Master: op=PointingHead serial=139091 10:06:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:06:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:06:36 Point started: ret=0 10:06:36 point_skyscan result=0 10:06:37 Check angles 10:06:37 SkyScan query 10:06:38 SkyScan query done: ret=0 az=152.655<-10177 ze=8.175<-11455 Statuses=0009 0009 10:06:38 Msec=0 True Az=152.655 Ze=8.175 Az status=0009 Ze status=0009 10:06:38 Check angles 10:06:38 SkyScan query 10:06:38 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.72<-12848 Statuses=0009 0009 10:06:38 Msec=750 True Az=135.135 Ze=-12.72 Az status=0009 Ze status=0009 10:06:38 Check angles 10:06:38 SkyScan query 10:06:39 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.72<-14248 Statuses=0009 0009 10:06:39 Msec=1500 True Az=117.6 Ze=-33.72 Az status=0009 Ze status=0009 10:06:39 Check angles 10:06:39 SkyScan query 10:06:40 SkyScan query done: ret=0 az=99.78<-6652 ze=-51.57<-15438 Statuses=0009 0009 10:06:40 Msec=2250 True Az=99.78 Ze=-51.57 Az status=0009 Ze status=0009 10:06:40 Check angles 10:06:40 SkyScan query 10:06:41 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 10:06:41 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 10:06:41 Check angles 10:06:41 SkyScan query 10:06:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:06:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:06:41 Message to Master queued w/err=0: serial=139091 error=0 10:06:46 Received message from Master: op=Filter serial=139092 10:06:46 Color wheel filter change from 0 to 0 10:06:46 FLIGetFilterPos err=0 currentPosition=0 10:06:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:46 Filter is already there-color wheel unchanged 10:06:47 Received message from Master: op=Shutter serial=139093 10:06:47 Shutter LASER close 10:06:47 Received message from Camera: op=State serial=139095 10:06:47 GetSingleValue result=40 Value=cccccccc 10:06:47 SkyScan query 10:06:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:06:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:47 Parameters OK 10:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:47 Set A/D data flow result=40 10:06:47 Set A/D channel type result=40 10:06:47 Set A/D encoding result=40 10:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:47 Set channel filter=0.000000e+000 result=40 10:06:47 Config A/D Result=40 10:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:47 Get A/D filter: -9.255963e+061 result=40 10:06:47 Get A/D value=-858993460 result=40 10:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:47 Parameters OK 10:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:47 Set A/D data flow result=40 10:06:47 Set A/D channel type result=40 10:06:47 Set A/D encoding result=40 10:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:47 Set channel filter=0.000000e+000 result=40 10:06:47 Config A/D Result=40 10:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:47 Get A/D filter: -9.255963e+061 result=40 10:06:47 Get A/D value=-858993460 result=40 10:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:47 Aux= 10:06:47 Message to Camera, serial 139095 queued 10:07:24 Received message from Master: op=PointingHead serial=139108 10:07:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:07:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:07:24 Point started: ret=0 10:07:24 point_skyscan result=0 10:07:25 Check angles 10:07:25 SkyScan query 10:07:26 SkyScan query done: ret=0 az=109.44<-7296 ze=-81.855<-17457 Statuses=0009 0009 10:07:26 Msec=0 True Az=109.44 Ze=-81.855 Az status=0009 Ze status=0009 10:07:26 Check angles 10:07:26 SkyScan query 10:07:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.81<-18854 Statuses=0008 0009 10:07:26 Msec=750 True Az=112.995 Ze=-102.81 Az status=0008 Ze status=0009 10:07:27 Check angles 10:07:27 SkyScan query 10:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.75<-20250 Statuses=0008 0009 10:07:27 Msec=1500 True Az=112.995 Ze=-123.75 Az status=0008 Ze status=0009 10:07:27 Check angles 10:07:27 SkyScan query 10:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.125<-21675 Statuses=0008 0009 10:07:28 Msec=2250 True Az=112.995 Ze=-145.125 Az status=0008 Ze status=0009 10:07:28 Check angles 10:07:28 SkyScan query 10:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.08<-23072 Statuses=0008 0009 10:07:29 Msec=3000 True Az=112.995 Ze=-166.08 Az status=0008 Ze status=0009 10:07:29 Check angles 10:07:29 SkyScan query 10:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:07:29 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:07:29 Message to Master queued w/err=0: serial=139108 error=0 10:07:34 Received message from Master: op=Filter serial=139109 10:07:34 Color wheel filter change from 0 to 0 10:07:34 FLIGetFilterPos err=0 currentPosition=0 10:07:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:34 Filter is already there-color wheel unchanged 10:07:35 Received message from Master: op=Shutter serial=139110 10:07:35 Shutter LASER open 10:07:35 Received message from Camera: op=State serial=139112 10:07:35 GetSingleValue result=40 Value=cccccccc 10:07:35 SkyScan query 10:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:07:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:35 Parameters OK 10:07:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:35 Set A/D data flow result=40 10:07:35 Set A/D channel type result=40 10:07:35 Set A/D encoding result=40 10:07:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:35 Set channel filter=0.000000e+000 result=40 10:07:35 Config A/D Result=40 10:07:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:35 Get A/D filter: -9.255963e+061 result=40 10:07:35 Get A/D value=-858993460 result=40 10:07:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:35 Parameters OK 10:07:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:35 Set A/D data flow result=40 10:07:35 Set A/D channel type result=40 10:07:35 Set A/D encoding result=40 10:07:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:35 Set channel filter=0.000000e+000 result=40 10:07:35 Config A/D Result=40 10:07:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:35 Get A/D filter: -9.255963e+061 result=40 10:07:35 Get A/D value=-858993460 result=40 10:07:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:35 Aux= 10:07:35 Message to Camera, serial 139112 queued 10:07:44 Received message from Master: op=Shutter serial=139122 10:07:44 Shutter LASER close 10:07:44 Received message from Master: op=PointingHead serial=139126 10:07:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:07:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:07:45 Point started: ret=0 10:07:45 point_skyscan result=0 10:07:45 Check angles 10:07:45 SkyScan query 10:07:46 SkyScan query done: ret=0 az=89.565<-5971 ze=156.795<-1547 Statuses=0009 0009 10:07:46 Msec=0 True Az=89.565 Ze=156.795 Az status=0009 Ze status=0009 10:07:46 Check angles 10:07:46 SkyScan query 10:07:47 SkyScan query done: ret=0 az=72.045<-4803 ze=135.855<-2943 Statuses=0009 0009 10:07:47 Msec=750 True Az=72.045 Ze=135.855 Az status=0009 Ze status=0009 10:07:47 Check angles 10:07:47 SkyScan query 10:07:47 SkyScan query done: ret=0 az=54.57<-3638 ze=114.855<-4343 Statuses=0009 0009 10:07:47 Msec=1500 True Az=54.57 Ze=114.855 Az status=0009 Ze status=0009 10:07:48 Check angles 10:07:48 SkyScan query 10:07:48 SkyScan query done: ret=0 az=40.98<-2732 ze=93.93<-5738 Statuses=0009 0009 10:07:48 Msec=2250 True Az=40.98 Ze=93.93 Az status=0009 Ze status=0009 10:07:48 Check angles 10:07:48 SkyScan query 10:07:49 SkyScan query done: ret=0 az=40.995<-2733 ze=72.945<-7137 Statuses=0008 0009 10:07:49 Msec=3000 True Az=40.995 Ze=72.945 Az status=0008 Ze status=0009 10:07:49 Check angles 10:07:49 SkyScan query 10:07:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 10:07:50 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 10:07:50 Check angles 10:07:50 SkyScan query 10:07:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:07:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:07:50 Message to Master queued w/err=0: serial=139126 error=0 10:07:55 Received message from Master: op=Filter serial=139127 10:07:55 Color wheel filter change from 0 to 0 10:07:55 FLIGetFilterPos err=0 currentPosition=0 10:07:55 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:55 Filter is already there-color wheel unchanged 10:07:56 Received message from Master: op=Shutter serial=139128 10:07:56 Shutter LASER close 10:07:56 Received message from Camera: op=State serial=139130 10:07:56 GetSingleValue result=40 Value=cccccccc 10:07:56 SkyScan query 10:07:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:07:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:56 Parameters OK 10:07:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:56 Set A/D data flow result=40 10:07:56 Set A/D channel type result=40 10:07:56 Set A/D encoding result=40 10:07:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:56 Set channel filter=0.000000e+000 result=40 10:07:56 Config A/D Result=40 10:07:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:56 Get A/D filter: -9.255963e+061 result=40 10:07:56 Get A/D value=-858993460 result=40 10:07:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:56 Parameters OK 10:07:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:56 Set A/D data flow result=40 10:07:56 Set A/D channel type result=40 10:07:56 Set A/D encoding result=40 10:07:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:56 Set channel filter=0.000000e+000 result=40 10:07:56 Config A/D Result=40 10:07:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:56 Get A/D filter: -9.255963e+061 result=40 10:07:56 Get A/D value=-858993460 result=40 10:07:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:56 Aux= 10:07:56 Message to Camera, serial 139130 queued 10:08:33 Received message from Master: op=PointingHead serial=139143 10:08:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:08:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:08:34 Point started: ret=0 10:08:34 point_skyscan result=0 10:08:34 Check angles 10:08:34 SkyScan query 10:08:35 SkyScan query done: ret=0 az=64.125<-4275 ze=66.555<-7563 Statuses=0009 0008 10:08:35 Msec=0 True Az=64.125 Ze=66.555 Az status=0009 Ze status=0008 10:08:35 Check angles 10:08:35 SkyScan query 10:08:36 SkyScan query done: ret=0 az=82.005<-5467 ze=66.495<-7567 Statuses=0009 0008 10:08:36 Msec=750 True Az=82.005 Ze=66.495 Az status=0009 Ze status=0008 10:08:36 Check angles 10:08:36 SkyScan query 10:08:36 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 10:08:36 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 10:08:37 Check angles 10:08:37 SkyScan query 10:08:37 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 10:08:37 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 10:08:37 Check angles 10:08:37 SkyScan query 10:08:38 SkyScan query done: ret=0 az=134.46<-8964 ze=66.495<-7567 Statuses=0009 0008 10:08:38 Msec=3000 True Az=134.46 Ze=66.495 Az status=0009 Ze status=0008 10:08:38 Check angles 10:08:38 SkyScan query 10:08:39 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 10:08:39 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 10:08:39 Check angles 10:08:39 SkyScan query 10:08:39 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:08:39 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:08:39 Message to Master queued w/err=0: serial=139143 error=0 10:08:44 Received message from Master: op=Filter serial=139144 10:08:44 Color wheel filter change from 0 to 0 10:08:44 FLIGetFilterPos err=0 currentPosition=0 10:08:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:44 Filter is already there-color wheel unchanged 10:08:45 Received message from Master: op=Shutter serial=139145 10:08:45 Shutter LASER close 10:08:45 Received message from Camera: op=State serial=139147 10:08:45 GetSingleValue result=40 Value=cccccccc 10:08:45 SkyScan query 10:08:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:08:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:45 Parameters OK 10:08:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:45 Set A/D data flow result=40 10:08:45 Set A/D channel type result=40 10:08:45 Set A/D encoding result=40 10:08:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:45 Set channel filter=0.000000e+000 result=40 10:08:45 Config A/D Result=40 10:08:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:45 Get A/D filter: -9.255963e+061 result=40 10:08:45 Get A/D value=-858993460 result=40 10:08:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:45 Parameters OK 10:08:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:45 Set A/D data flow result=40 10:08:45 Set A/D channel type result=40 10:08:45 Set A/D encoding result=40 10:08:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:45 Set channel filter=0.000000e+000 result=40 10:08:45 Config A/D Result=40 10:08:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:45 Get A/D filter: -9.255963e+061 result=40 10:08:45 Get A/D value=-858993460 result=40 10:08:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:45 Aux= 10:08:45 Message to Camera, serial 139147 queued 10:09:22 Received message from Master: op=PointingHead serial=139160 10:09:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:09:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:09:22 Point started: ret=0 10:09:22 point_skyscan result=0 10:09:23 Check angles 10:09:23 SkyScan query 10:09:24 SkyScan query done: ret=0 az=134.58<-8972 ze=36.195<-9587 Statuses=0009 0009 10:09:24 Msec=0 True Az=134.58 Ze=36.195 Az status=0009 Ze status=0009 10:09:24 Check angles 10:09:24 SkyScan query 10:09:24 SkyScan query done: ret=0 az=117.105<-7807 ze=15.435<-10971 Statuses=0009 0009 10:09:24 Msec=750 True Az=117.105 Ze=15.435 Az status=0009 Ze status=0009 10:09:25 Check angles 10:09:25 SkyScan query 10:09:25 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.565<-12371 Statuses=0009 0009 10:09:25 Msec=1500 True Az=99.78 Ze=-5.565 Az status=0009 Ze status=0009 10:09:25 Check angles 10:09:25 SkyScan query 10:09:26 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.535<-13769 Statuses=0009 0009 10:09:26 Msec=2250 True Az=82.245 Ze=-26.535 Az status=0009 Ze status=0009 10:09:26 Check angles 10:09:26 SkyScan query 10:09:27 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.58<-14572 Statuses=0009 0008 10:09:27 Msec=3000 True Az=64.86 Ze=-38.58 Az status=0009 Ze status=0008 10:09:27 Check angles 10:09:27 SkyScan query 10:09:27 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.52<-14568 Statuses=0009 0008 10:09:27 Msec=3750 True Az=47.355 Ze=-38.52 Az status=0009 Ze status=0008 10:09:28 Check angles 10:09:28 SkyScan query 10:09:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:09:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:09:28 Message to Master queued w/err=0: serial=139160 error=0 10:09:33 Received message from Master: op=Filter serial=139161 10:09:33 Color wheel filter change from 0 to 0 10:09:33 FLIGetFilterPos err=0 currentPosition=0 10:09:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:33 Filter is already there-color wheel unchanged 10:09:33 Received message from Master: op=Shutter serial=139162 10:09:33 Shutter LASER close 10:09:33 Received message from Camera: op=State serial=139164 10:09:33 GetSingleValue result=40 Value=cccccccc 10:09:33 SkyScan query 10:09:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:09:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:34 Parameters OK 10:09:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:34 Set A/D data flow result=40 10:09:34 Set A/D channel type result=40 10:09:34 Set A/D encoding result=40 10:09:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:34 Set channel filter=0.000000e+000 result=40 10:09:34 Config A/D Result=40 10:09:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:34 Get A/D filter: -9.255963e+061 result=40 10:09:34 Get A/D value=-858993460 result=40 10:09:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:34 Parameters OK 10:09:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:34 Set A/D data flow result=40 10:09:34 Set A/D channel type result=40 10:09:34 Set A/D encoding result=40 10:09:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:34 Set channel filter=0.000000e+000 result=40 10:09:34 Config A/D Result=40 10:09:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:34 Get A/D filter: -9.255963e+061 result=40 10:09:34 Get A/D value=-858993460 result=40 10:09:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:34 Aux= 10:09:34 Message to Camera, serial 139164 queued 10:10:10 Received message from Master: op=PointingHead serial=139176 10:10:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:10:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:10:10 Point started: ret=0 10:10:10 point_skyscan result=0 10:10:11 Check angles 10:10:11 SkyScan query 10:10:12 SkyScan query done: ret=0 az=64.35<-4290 ze=-68.79<-16586 Statuses=0009 0009 10:10:12 Msec=0 True Az=64.35 Ze=-68.79 Az status=0009 Ze status=0009 10:10:12 Check angles 10:10:12 SkyScan query 10:10:12 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.745<-17983 Statuses=0009 0009 10:10:12 Msec=750 True Az=81.84 Ze=-89.745 Az status=0009 Ze status=0009 10:10:13 Check angles 10:10:13 SkyScan query 10:10:13 SkyScan query done: ret=0 az=99.27<-6618 ze=-110.73<-19382 Statuses=0009 0009 10:10:13 Msec=1500 True Az=99.27 Ze=-110.73 Az status=0009 Ze status=0009 10:10:13 Check angles 10:10:13 SkyScan query 10:10:14 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.61<-20774 Statuses=0009 0009 10:10:14 Msec=2250 True Az=116.895 Ze=-131.61 Az status=0009 Ze status=0009 10:10:14 Check angles 10:10:14 SkyScan query 10:10:15 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 10:10:15 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 10:10:15 Check angles 10:10:15 SkyScan query 10:10:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 10:10:15 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 10:10:15 Message to Master queued w/err=0: serial=139176 error=0 10:10:20 Received message from Master: op=Filter serial=139177 10:10:20 Color wheel filter change from 0 to 0 10:10:20 FLIGetFilterPos err=0 currentPosition=0 10:10:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:20 Filter is already there-color wheel unchanged 10:10:21 Received message from Master: op=Shutter serial=139178 10:10:21 Shutter LASER close 10:10:21 Received message from Camera: op=State serial=139180 10:10:21 GetSingleValue result=40 Value=cccccccc 10:10:21 SkyScan query 10:10:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:10:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:21 Parameters OK 10:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:21 Set A/D data flow result=40 10:10:21 Set A/D channel type result=40 10:10:21 Set A/D encoding result=40 10:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:21 Set channel filter=0.000000e+000 result=40 10:10:21 Config A/D Result=40 10:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:21 Get A/D filter: -9.255963e+061 result=40 10:10:21 Get A/D value=-858993460 result=40 10:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:21 Parameters OK 10:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:21 Set A/D data flow result=40 10:10:21 Set A/D channel type result=40 10:10:21 Set A/D encoding result=40 10:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:21 Set channel filter=0.000000e+000 result=40 10:10:21 Config A/D Result=40 10:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:21 Get A/D filter: -9.255963e+061 result=40 10:10:21 Get A/D value=-858993460 result=40 10:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:21 Aux= 10:10:21 Message to Camera, serial 139180 queued 10:10:58 Received message from Master: op=PointingHead serial=139193 10:10:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:10:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:10:58 Point started: ret=0 10:10:58 point_skyscan result=0 10:10:59 Check angles 10:10:59 SkyScan query 10:11:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 10:11:00 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 10:11:00 Check angles 10:11:00 SkyScan query 10:11:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:11:00 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:11:00 Message to Master queued w/err=0: serial=139193 error=0 10:11:05 Received message from Master: op=Filter serial=139194 10:11:05 Color wheel filter change from 0 to 0 10:11:05 FLIGetFilterPos err=0 currentPosition=0 10:11:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:05 Filter is already there-color wheel unchanged 10:11:06 Received message from Master: op=Shutter serial=139195 10:11:06 Shutter LASER open 10:11:06 Received message from Camera: op=State serial=139197 10:11:06 GetSingleValue result=40 Value=cccccccc 10:11:06 SkyScan query 10:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:11:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:06 Parameters OK 10:11:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:06 Set A/D data flow result=40 10:11:06 Set A/D channel type result=40 10:11:06 Set A/D encoding result=40 10:11:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:06 Set channel filter=0.000000e+000 result=40 10:11:06 Config A/D Result=40 10:11:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:06 Get A/D filter: -9.255963e+061 result=40 10:11:06 Get A/D value=-858993460 result=40 10:11:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:06 Parameters OK 10:11:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:06 Set A/D data flow result=40 10:11:06 Set A/D channel type result=40 10:11:06 Set A/D encoding result=40 10:11:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:06 Set channel filter=0.000000e+000 result=40 10:11:06 Config A/D Result=40 10:11:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:06 Get A/D filter: -9.255963e+061 result=40 10:11:06 Get A/D value=-858993460 result=40 10:11:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:06 Aux= 10:11:06 Message to Camera, serial 139197 queued 10:11:15 Received message from Master: op=Shutter serial=139207 10:11:15 Shutter LASER close 10:11:15 Received message from Master: op=PointingHead serial=139211 10:11:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:11:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:11:16 Point started: ret=0 10:11:16 point_skyscan result=0 10:11:16 Check angles 10:11:16 SkyScan query 10:11:17 SkyScan query done: ret=0 az=135.87<-9058 ze=-143.415<-21561 Statuses=0009 0009 10:11:17 Msec=0 True Az=135.87 Ze=-143.415 Az status=0009 Ze status=0009 10:11:17 Check angles 10:11:17 SkyScan query 10:11:18 SkyScan query done: ret=0 az=153.33<-10222 ze=-122.415<-20161 Statuses=0009 0009 10:11:18 Msec=750 True Az=153.33 Ze=-122.415 Az status=0009 Ze status=0009 10:11:18 Check angles 10:11:18 SkyScan query 10:11:19 SkyScan query done: ret=0 az=170.895<-11393 ze=-101.505<-18767 Statuses=0009 0009 10:11:19 Msec=1500 True Az=170.895 Ze=-101.505 Az status=0009 Ze status=0009 10:11:19 Check angles 10:11:19 SkyScan query 10:11:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.52<-17368 Statuses=0008 0009 10:11:19 Msec=2250 True Az=176.01 Ze=-80.52 Az status=0008 Ze status=0009 10:11:19 Check angles 10:11:19 SkyScan query 10:11:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.58<-15972 Statuses=0008 0009 10:11:20 Msec=3000 True Az=176.01 Ze=-59.58 Az status=0008 Ze status=0009 10:11:20 Check angles 10:11:20 SkyScan query 10:11:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:11:21 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:11:21 Message to Master queued w/err=0: serial=139211 error=0 10:11:26 Received message from Master: op=Filter serial=139212 10:11:26 Color wheel filter change from 0 to 0 10:11:26 FLIGetFilterPos err=0 currentPosition=0 10:11:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:26 Filter is already there-color wheel unchanged 10:11:26 Received message from Master: op=Shutter serial=139213 10:11:26 Shutter LASER close 10:11:26 Received message from Camera: op=State serial=139215 10:11:26 GetSingleValue result=40 Value=cccccccc 10:11:26 SkyScan query 10:11:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:11:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:27 Parameters OK 10:11:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:27 Set A/D data flow result=40 10:11:27 Set A/D channel type result=40 10:11:27 Set A/D encoding result=40 10:11:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:27 Set channel filter=0.000000e+000 result=40 10:11:27 Config A/D Result=40 10:11:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:27 Get A/D filter: -9.255963e+061 result=40 10:11:27 Get A/D value=-858993460 result=40 10:11:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:27 Parameters OK 10:11:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:27 Set A/D data flow result=40 10:11:27 Set A/D channel type result=40 10:11:27 Set A/D encoding result=40 10:11:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:27 Set channel filter=0.000000e+000 result=40 10:11:27 Config A/D Result=40 10:11:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:27 Get A/D filter: -9.255963e+061 result=40 10:11:27 Get A/D value=-858993460 result=40 10:11:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:27 Aux= 10:11:27 Message to Camera, serial 139215 queued 10:12:03 Received message from Master: op=PointingHead serial=139228 10:12:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:12:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:12:04 Point started: ret=0 10:12:04 point_skyscan result=0 10:12:05 Check angles 10:12:05 SkyScan query 10:12:05 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.08<-13472 Statuses=0009 0009 10:12:05 Msec=0 True Az=153.225 Ze=-22.08 Az status=0009 Ze status=0009 10:12:05 Check angles 10:12:05 SkyScan query 10:12:06 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.63<-12042 Statuses=0009 0009 10:12:06 Msec=750 True Az=135.39 Ze=-0.63 Az status=0009 Ze status=0009 10:12:06 Check angles 10:12:06 SkyScan query 10:12:07 SkyScan query done: ret=0 az=117.795<-7853 ze=20.295<-10647 Statuses=0009 0009 10:12:07 Msec=1500 True Az=117.795 Ze=20.295 Az status=0009 Ze status=0009 10:12:07 Check angles 10:12:07 SkyScan query 10:12:07 SkyScan query done: ret=0 az=100.425<-6695 ze=41.28<-9248 Statuses=0009 0009 10:12:07 Msec=2250 True Az=100.425 Ze=41.28 Az status=0009 Ze status=0009 10:12:08 Check angles 10:12:08 SkyScan query 10:12:08 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 10:12:08 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 10:12:08 Check angles 10:12:08 SkyScan query 10:12:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:12:09 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:12:09 Message to Master queued w/err=0: serial=139228 error=0 10:12:14 Received message from Master: op=Filter serial=139229 10:12:14 Color wheel filter change from 0 to 0 10:12:14 FLIGetFilterPos err=0 currentPosition=0 10:12:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:14 Filter is already there-color wheel unchanged 10:12:14 Received message from Master: op=Shutter serial=139230 10:12:14 Shutter LASER close 10:12:14 Received message from Camera: op=State serial=139232 10:12:14 GetSingleValue result=40 Value=cccccccc 10:12:14 SkyScan query 10:12:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:12:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:15 Parameters OK 10:12:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:15 Set A/D data flow result=40 10:12:15 Set A/D channel type result=40 10:12:15 Set A/D encoding result=40 10:12:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:15 Set channel filter=0.000000e+000 result=40 10:12:15 Config A/D Result=40 10:12:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:15 Get A/D filter: -9.255963e+061 result=40 10:12:15 Get A/D value=-858993460 result=40 10:12:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:15 Parameters OK 10:12:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:15 Set A/D data flow result=40 10:12:15 Set A/D channel type result=40 10:12:15 Set A/D encoding result=40 10:12:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:15 Set channel filter=0.000000e+000 result=40 10:12:15 Config A/D Result=40 10:12:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:15 Get A/D filter: -9.255963e+061 result=40 10:12:15 Get A/D value=-858993460 result=40 10:12:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:15 Aux= 10:12:15 Message to Camera, serial 139232 queued 10:12:52 Received message from Master: op=PointingHead serial=139245 10:12:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:12:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:12:52 Point started: ret=0 10:12:52 point_skyscan result=0 10:12:53 Check angles 10:12:53 SkyScan query 10:12:53 SkyScan query done: ret=0 az=108.855<-7257 ze=38.475<-9435 Statuses=0009 0008 10:12:53 Msec=0 True Az=108.855 Ze=38.475 Az status=0009 Ze status=0008 10:12:53 Check angles 10:12:53 SkyScan query 10:12:54 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 10:12:54 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 10:12:54 Check angles 10:12:54 SkyScan query 10:12:55 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 10:12:55 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 10:12:55 Check angles 10:12:55 SkyScan query 10:12:56 SkyScan query done: ret=0 az=161.145<-10743 ze=38.505<-9433 Statuses=0009 0008 10:12:56 Msec=2250 True Az=161.145 Ze=38.505 Az status=0009 Ze status=0008 10:12:56 Check angles 10:12:56 SkyScan query 10:12:56 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:12:56 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:12:56 Check angles 10:12:56 SkyScan query 10:12:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:12:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:12:57 Message to Master queued w/err=0: serial=139245 error=0 10:13:02 Received message from Master: op=Filter serial=139246 10:13:02 Color wheel filter change from 0 to 0 10:13:02 FLIGetFilterPos err=0 currentPosition=0 10:13:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:02 Filter is already there-color wheel unchanged 10:13:02 Received message from Master: op=Shutter serial=139247 10:13:02 Shutter LASER close 10:13:02 Received message from Camera: op=State serial=139249 10:13:02 GetSingleValue result=40 Value=cccccccc 10:13:02 SkyScan query 10:13:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:13:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:03 Parameters OK 10:13:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:03 Set A/D data flow result=40 10:13:03 Set A/D channel type result=40 10:13:03 Set A/D encoding result=40 10:13:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:03 Set channel filter=0.000000e+000 result=40 10:13:03 Config A/D Result=40 10:13:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:03 Get A/D filter: -9.255963e+061 result=40 10:13:03 Get A/D value=-858993460 result=40 10:13:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:03 Parameters OK 10:13:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:03 Set A/D data flow result=40 10:13:03 Set A/D channel type result=40 10:13:03 Set A/D encoding result=40 10:13:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:03 Set channel filter=0.000000e+000 result=40 10:13:03 Config A/D Result=40 10:13:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:03 Get A/D filter: -9.255963e+061 result=40 10:13:03 Get A/D value=-858993460 result=40 10:13:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:03 Aux= 10:13:03 Message to Camera, serial 139249 queued 10:13:40 Received message from Master: op=PointingHead serial=139262 10:13:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:13:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:13:40 Point started: ret=0 10:13:40 point_skyscan result=0 10:13:41 Check angles 10:13:41 SkyScan query 10:13:41 SkyScan query done: ret=0 az=152.715<-10181 ze=8.205<-11453 Statuses=0009 0009 10:13:41 Msec=0 True Az=152.715 Ze=8.205 Az status=0009 Ze status=0009 10:13:42 Check angles 10:13:42 SkyScan query 10:13:42 SkyScan query done: ret=0 az=134.745<-8983 ze=-13.14<-12876 Statuses=0009 0009 10:13:42 Msec=750 True Az=134.745 Ze=-13.14 Az status=0009 Ze status=0009 10:13:42 Check angles 10:13:42 SkyScan query 10:13:43 SkyScan query done: ret=0 az=117.345<-7823 ze=-34.155<-14277 Statuses=0009 0009 10:13:43 Msec=1500 True Az=117.345 Ze=-34.155 Az status=0009 Ze status=0009 10:13:43 Check angles 10:13:43 SkyScan query 10:13:44 SkyScan query done: ret=0 az=99.9<-6660 ze=-51.57<-15438 Statuses=0009 0009 10:13:44 Msec=2250 True Az=99.9 Ze=-51.57 Az status=0009 Ze status=0009 10:13:44 Check angles 10:13:44 SkyScan query 10:13:44 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 10:13:44 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 10:13:45 Check angles 10:13:45 SkyScan query 10:13:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:13:45 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:13:45 Message to Master queued w/err=0: serial=139262 error=0 10:13:50 Received message from Master: op=Filter serial=139263 10:13:50 Color wheel filter change from 0 to 0 10:13:50 FLIGetFilterPos err=0 currentPosition=0 10:13:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:50 Filter is already there-color wheel unchanged 10:13:50 Received message from Master: op=Shutter serial=139264 10:13:50 Shutter LASER close 10:13:50 Received message from Camera: op=State serial=139266 10:13:50 GetSingleValue result=40 Value=cccccccc 10:13:50 SkyScan query 10:13:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:13:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:51 Parameters OK 10:13:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:51 Set A/D data flow result=40 10:13:51 Set A/D channel type result=40 10:13:51 Set A/D encoding result=40 10:13:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:51 Set channel filter=0.000000e+000 result=40 10:13:51 Config A/D Result=40 10:13:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:51 Get A/D filter: -9.255963e+061 result=40 10:13:51 Get A/D value=-858993460 result=40 10:13:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:51 Parameters OK 10:13:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:51 Set A/D data flow result=40 10:13:51 Set A/D channel type result=40 10:13:51 Set A/D encoding result=40 10:13:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:51 Set channel filter=0.000000e+000 result=40 10:13:51 Config A/D Result=40 10:13:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:51 Get A/D filter: -9.255963e+061 result=40 10:13:51 Get A/D value=-858993460 result=40 10:13:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:51 Aux= 10:13:51 Message to Camera, serial 139266 queued 10:14:28 Received message from Master: op=PointingHead serial=139279 10:14:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:14:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:14:28 Point started: ret=0 10:14:28 point_skyscan result=0 10:14:29 Check angles 10:14:29 SkyScan query 10:14:29 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.825<-17455 Statuses=0009 0009 10:14:29 Msec=0 True Az=109.38 Ze=-81.825 Az status=0009 Ze status=0009 10:14:30 Check angles 10:14:30 SkyScan query 10:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 10:14:30 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 10:14:30 Check angles 10:14:30 SkyScan query 10:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.14<-20276 Statuses=0008 0009 10:14:31 Msec=1500 True Az=112.995 Ze=-124.14 Az status=0008 Ze status=0009 10:14:31 Check angles 10:14:31 SkyScan query 10:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.53<-21702 Statuses=0008 0009 10:14:32 Msec=2250 True Az=112.995 Ze=-145.53 Az status=0008 Ze status=0009 10:14:32 Check angles 10:14:32 SkyScan query 10:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.92<-23128 Statuses=0008 0009 10:14:32 Msec=3000 True Az=112.995 Ze=-166.92 Az status=0008 Ze status=0009 10:14:33 Check angles 10:14:33 SkyScan query 10:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:14:33 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:14:33 Message to Master queued w/err=0: serial=139279 error=0 10:14:38 Received message from Master: op=Filter serial=139280 10:14:38 Color wheel filter change from 0 to 0 10:14:38 FLIGetFilterPos err=0 currentPosition=0 10:14:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:38 Filter is already there-color wheel unchanged 10:14:38 Received message from Master: op=Shutter serial=139281 10:14:38 Shutter LASER open 10:14:39 Received message from Camera: op=State serial=139283 10:14:39 GetSingleValue result=40 Value=cccccccc 10:14:39 SkyScan query 10:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:14:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:39 Parameters OK 10:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:39 Set A/D data flow result=40 10:14:39 Set A/D channel type result=40 10:14:39 Set A/D encoding result=40 10:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:39 Set channel filter=0.000000e+000 result=40 10:14:39 Config A/D Result=40 10:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:39 Get A/D filter: -9.255963e+061 result=40 10:14:39 Get A/D value=-858993460 result=40 10:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:39 Parameters OK 10:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:39 Set A/D data flow result=40 10:14:39 Set A/D channel type result=40 10:14:39 Set A/D encoding result=40 10:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:39 Set channel filter=0.000000e+000 result=40 10:14:39 Config A/D Result=40 10:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:39 Get A/D filter: -9.255963e+061 result=40 10:14:39 Get A/D value=-858993460 result=40 10:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:39 Aux= 10:14:39 Message to Camera, serial 139283 queued 10:14:48 Received message from Master: op=Shutter serial=139293 10:14:48 Shutter LASER close 10:14:48 Received message from Master: op=PointingHead serial=139297 10:14:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:14:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:14:48 Point started: ret=0 10:14:48 point_skyscan result=0 10:14:49 Check angles 10:14:49 SkyScan query 10:14:50 SkyScan query done: ret=0 az=89.985<-5999 ze=157.335<-1511 Statuses=0009 0009 10:14:50 Msec=0 True Az=89.985 Ze=157.335 Az status=0009 Ze status=0009 10:14:50 Check angles 10:14:50 SkyScan query 10:14:51 SkyScan query done: ret=0 az=72.18<-4812 ze=135.93<-2938 Statuses=0009 0009 10:14:51 Msec=750 True Az=72.18 Ze=135.93 Az status=0009 Ze status=0009 10:14:51 Check angles 10:14:51 SkyScan query 10:14:51 SkyScan query done: ret=0 az=54.36<-3624 ze=114.495<-4367 Statuses=0009 0009 10:14:51 Msec=1500 True Az=54.36 Ze=114.495 Az status=0009 Ze status=0009 10:14:51 Check angles 10:14:51 SkyScan query 10:14:52 SkyScan query done: ret=0 az=40.98<-2732 ze=93.6<-5760 Statuses=0009 0009 10:14:52 Msec=2250 True Az=40.98 Ze=93.6 Az status=0009 Ze status=0009 10:14:52 Check angles 10:14:52 SkyScan query 10:14:53 SkyScan query done: ret=0 az=40.995<-2733 ze=72.195<-7187 Statuses=0008 0009 10:14:53 Msec=3000 True Az=40.995 Ze=72.195 Az status=0008 Ze status=0009 10:14:53 Check angles 10:14:53 SkyScan query 10:14:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.975<-8535 Statuses=0008 0009 10:14:54 Msec=3750 True Az=40.995 Ze=51.975 Az status=0008 Ze status=0009 10:14:54 Check angles 10:14:54 SkyScan query 10:14:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:14:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:14:54 Message to Master queued w/err=0: serial=139297 error=0 10:14:59 Received message from Master: op=Filter serial=139298 10:14:59 Color wheel filter change from 0 to 0 10:14:59 FLIGetFilterPos err=0 currentPosition=0 10:14:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:59 Filter is already there-color wheel unchanged 10:15:00 Received message from Master: op=Shutter serial=139299 10:15:00 Shutter LASER close 10:15:00 Received message from Camera: op=State serial=139301 10:15:00 GetSingleValue result=40 Value=cccccccc 10:15:00 SkyScan query 10:15:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:15:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:00 Parameters OK 10:15:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:00 Set A/D data flow result=40 10:15:00 Set A/D channel type result=40 10:15:00 Set A/D encoding result=40 10:15:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:00 Set channel filter=0.000000e+000 result=40 10:15:00 Config A/D Result=40 10:15:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:00 Get A/D filter: -9.255963e+061 result=40 10:15:00 Get A/D value=-858993460 result=40 10:15:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:00 Parameters OK 10:15:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:00 Set A/D data flow result=40 10:15:00 Set A/D channel type result=40 10:15:00 Set A/D encoding result=40 10:15:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:00 Set channel filter=0.000000e+000 result=40 10:15:00 Config A/D Result=40 10:15:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:00 Get A/D filter: -9.255963e+061 result=40 10:15:00 Get A/D value=-858993460 result=40 10:15:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:00 Aux= 10:15:00 Message to Camera, serial 139301 queued 10:15:27 Received message from Master: op=Identify serial=139302 10:15:37 Received message from Master: op=PointingHead serial=139317 10:15:37 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:15:37 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:15:37 Point started: ret=0 10:15:37 point_skyscan result=0 10:15:38 Check angles 10:15:38 SkyScan query 10:15:39 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 10:15:39 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 10:15:39 Check angles 10:15:39 SkyScan query 10:15:40 SkyScan query done: ret=0 az=81.39<-5426 ze=66.495<-7567 Statuses=0009 0008 10:15:40 Msec=750 True Az=81.39 Ze=66.495 Az status=0009 Ze status=0008 10:15:40 Check angles 10:15:40 SkyScan query 10:15:40 SkyScan query done: ret=0 az=98.76<-6584 ze=66.495<-7567 Statuses=0009 0008 10:15:40 Msec=1500 True Az=98.76 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-14 10:15:40] 10:15:40 Check angles 10:15:40 SkyScan query 10:15:41 SkyScan query done: ret=0 az=117.72<-7848 ze=66.495<-7567 Statuses=0009 0008 10:15:41 Msec=2250 True Az=117.72 Ze=66.495 Az status=0009 Ze status=0008 10:15:41 Check angles 10:15:41 SkyScan query 10:15:42 SkyScan query done: ret=0 az=133.845<-8923 ze=66.495<-7567 Statuses=0009 0008 10:15:42 Msec=3000 True Az=133.845 Ze=66.495 Az status=0009 Ze status=0008 10:15:42 Check angles 10:15:42 SkyScan query 10:15:43 SkyScan query done: ret=0 az=151.095<-10073 ze=66.495<-7567 Statuses=0009 0008 10:15:43 Msec=3750 True Az=151.095 Ze=66.495 Az status=0009 Ze status=0008 10:15:43 Check angles 10:15:43 SkyScan query 10:15:43 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:15:43 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:15:43 Message to Master queued w/err=0: serial=139317 error=0 10:15:48 Received message from Master: op=Filter serial=139318 10:15:48 Color wheel filter change from 0 to 0 10:15:48 FLIGetFilterPos err=0 currentPosition=0 10:15:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:48 Filter is already there-color wheel unchanged 10:15:48 Received message from Master: op=Shutter serial=139319 10:15:48 Shutter LASER close 10:15:48 Received message from Camera: op=State serial=139321 10:15:48 GetSingleValue result=40 Value=cccccccc 10:15:48 SkyScan query 10:15:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:15:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:49 Parameters OK 10:15:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:49 Set A/D data flow result=40 10:15:49 Set A/D channel type result=40 10:15:49 Set A/D encoding result=40 10:15:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:49 Set channel filter=0.000000e+000 result=40 10:15:49 Config A/D Result=40 10:15:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:49 Get A/D filter: -9.255963e+061 result=40 10:15:49 Get A/D value=-858993460 result=40 10:15:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:49 Parameters OK 10:15:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:49 Set A/D data flow result=40 10:15:49 Set A/D channel type result=40 10:15:49 Set A/D encoding result=40 10:15:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:49 Set channel filter=0.000000e+000 result=40 10:15:49 Config A/D Result=40 10:15:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:49 Get A/D filter: -9.255963e+061 result=40 10:15:49 Get A/D value=-858993460 result=40 10:15:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:49 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:49 Aux= 10:15:49 Message to Camera, serial 139321 queued [UTC 2018-12-14 10:15:52] 10:16:25 Received message from Master: op=PointingHead serial=139333 10:16:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:16:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:16:25 Point started: ret=0 10:16:25 point_skyscan result=0 10:16:26 Check angles 10:16:26 SkyScan query 10:16:27 SkyScan query done: ret=0 az=134.58<-8972 ze=36.39<-9574 Statuses=0009 0009 10:16:27 Msec=0 True Az=134.58 Ze=36.39 Az status=0009 Ze status=0009 10:16:27 Check angles 10:16:27 SkyScan query 10:16:27 SkyScan query done: ret=0 az=117.24<-7816 ze=15.48<-10968 Statuses=0009 0009 10:16:27 Msec=750 True Az=117.24 Ze=15.48 Az status=0009 Ze status=0009 10:16:28 Check angles 10:16:28 SkyScan query 10:16:28 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.535<-12369 Statuses=0009 0009 10:16:28 Msec=1500 True Az=99.885 Ze=-5.535 Az status=0009 Ze status=0009 10:16:28 Check angles 10:16:28 SkyScan query 10:16:29 SkyScan query done: ret=0 az=82.38<-5492 ze=-26.475<-13765 Statuses=0009 0009 10:16:29 Msec=2250 True Az=82.38 Ze=-26.475 Az status=0009 Ze status=0009 10:16:29 Check angles 10:16:29 SkyScan query 10:16:30 SkyScan query done: ret=0 az=64.83<-4322 ze=-38.58<-14572 Statuses=0009 0008 10:16:30 Msec=3000 True Az=64.83 Ze=-38.58 Az status=0009 Ze status=0008 10:16:30 Check angles 10:16:30 SkyScan query 10:16:30 SkyScan query done: ret=0 az=47.34<-3156 ze=-38.52<-14568 Statuses=0009 0008 10:16:30 Msec=3750 True Az=47.34 Ze=-38.52 Az status=0009 Ze status=0008 10:16:31 Check angles 10:16:31 SkyScan query 10:16:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:16:31 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:16:31 Message to Master queued w/err=0: serial=139333 error=0 10:16:36 Received message from Master: op=Filter serial=139334 10:16:36 Color wheel filter change from 0 to 0 10:16:36 FLIGetFilterPos err=0 currentPosition=0 10:16:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:36 Filter is already there-color wheel unchanged 10:16:36 Received message from Master: op=Shutter serial=139335 10:16:36 Shutter LASER close 10:16:36 Received message from Camera: op=State serial=139337 10:16:36 GetSingleValue result=40 Value=cccccccc 10:16:36 SkyScan query 10:16:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:16:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:37 Parameters OK 10:16:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:37 Set A/D data flow result=40 10:16:37 Set A/D channel type result=40 10:16:37 Set A/D encoding result=40 10:16:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:37 Set channel filter=0.000000e+000 result=40 10:16:37 Config A/D Result=40 10:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:37 Get A/D filter: -9.255963e+061 result=40 10:16:37 Get A/D value=-858993460 result=40 10:16:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:37 Parameters OK 10:16:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:37 Set A/D data flow result=40 10:16:37 Set A/D channel type result=40 10:16:37 Set A/D encoding result=40 10:16:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:37 Set channel filter=0.000000e+000 result=40 10:16:37 Config A/D Result=40 10:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:37 Get A/D filter: -9.255963e+061 result=40 10:16:37 Get A/D value=-858993460 result=40 10:16:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:37 Aux= 10:16:37 Message to Camera, serial 139337 queued 10:17:14 Received message from Master: op=PointingHead serial=139350 10:17:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:17:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:17:14 Point started: ret=0 10:17:14 point_skyscan result=0 10:17:15 Check angles 10:17:15 SkyScan query 10:17:15 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.19<-16546 Statuses=0009 0009 10:17:15 Msec=0 True Az=63.96 Ze=-68.19 Az status=0009 Ze status=0009 10:17:16 Check angles 10:17:16 SkyScan query 10:17:16 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.16<-17944 Statuses=0009 0009 10:17:16 Msec=750 True Az=81.36 Ze=-89.16 Az status=0009 Ze status=0009 10:17:16 Check angles 10:17:16 SkyScan query 10:17:17 SkyScan query done: ret=0 az=98.85<-6590 ze=-110.085<-19339 Statuses=0009 0009 10:17:17 Msec=1500 True Az=98.85 Ze=-110.085 Az status=0009 Ze status=0009 10:17:17 Check angles 10:17:17 SkyScan query 10:17:18 SkyScan query done: ret=0 az=116.385<-7759 ze=-131.22<-20748 Statuses=0009 0009 10:17:18 Msec=2250 True Az=116.385 Ze=-131.22 Az status=0009 Ze status=0009 10:17:18 Check angles 10:17:18 SkyScan query 10:17:18 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 10:17:18 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 10:17:19 Check angles 10:17:19 SkyScan query 10:17:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 10:17:19 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 10:17:19 Message to Master queued w/err=0: serial=139350 error=0 10:17:24 Received message from Master: op=Filter serial=139351 10:17:24 Color wheel filter change from 0 to 0 10:17:24 FLIGetFilterPos err=0 currentPosition=0 10:17:24 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:24 Filter is already there-color wheel unchanged 10:17:24 Received message from Master: op=Shutter serial=139352 10:17:24 Shutter LASER close 10:17:24 Received message from Camera: op=State serial=139354 10:17:24 GetSingleValue result=40 Value=cccccccc 10:17:24 SkyScan query 10:17:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:17:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:25 Parameters OK 10:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:25 Set A/D data flow result=40 10:17:25 Set A/D channel type result=40 10:17:25 Set A/D encoding result=40 10:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:25 Set channel filter=0.000000e+000 result=40 10:17:25 Config A/D Result=40 10:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:25 Get A/D filter: -9.255963e+061 result=40 10:17:25 Get A/D value=-858993460 result=40 10:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:25 Parameters OK 10:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:25 Set A/D data flow result=40 10:17:25 Set A/D channel type result=40 10:17:25 Set A/D encoding result=40 10:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:25 Set channel filter=0.000000e+000 result=40 10:17:25 Config A/D Result=40 10:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:25 Get A/D filter: -9.255963e+061 result=40 10:17:25 Get A/D value=-858993460 result=40 10:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:25 Aux= 10:17:25 Message to Camera, serial 139354 queued 10:18:02 Received message from Master: op=PointingHead serial=139367 10:18:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:18:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:18:02 Point started: ret=0 10:18:02 point_skyscan result=0 10:18:03 Check angles 10:18:03 SkyScan query 10:18:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 10:18:03 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 10:18:04 Check angles 10:18:04 SkyScan query 10:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:18:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:18:04 Message to Master queued w/err=0: serial=139367 error=0 10:18:09 Received message from Master: op=Filter serial=139368 10:18:09 Color wheel filter change from 0 to 0 10:18:09 FLIGetFilterPos err=0 currentPosition=0 10:18:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:09 Filter is already there-color wheel unchanged 10:18:09 Received message from Master: op=Shutter serial=139369 10:18:09 Shutter LASER open 10:18:10 Received message from Camera: op=State serial=139371 10:18:10 GetSingleValue result=40 Value=cccccccc 10:18:10 SkyScan query 10:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:18:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:10 Parameters OK 10:18:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:10 Set A/D data flow result=40 10:18:10 Set A/D channel type result=40 10:18:10 Set A/D encoding result=40 10:18:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:10 Set channel filter=0.000000e+000 result=40 10:18:10 Config A/D Result=40 10:18:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:10 Get A/D filter: -9.255963e+061 result=40 10:18:10 Get A/D value=-858993460 result=40 10:18:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:10 Parameters OK 10:18:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:10 Set A/D data flow result=40 10:18:10 Set A/D channel type result=40 10:18:10 Set A/D encoding result=40 10:18:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:10 Set channel filter=0.000000e+000 result=40 10:18:10 Config A/D Result=40 10:18:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:10 Get A/D filter: -9.255963e+061 result=40 10:18:10 Get A/D value=-858993460 result=40 10:18:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:10 Aux= 10:18:10 Message to Camera, serial 139371 queued 10:18:19 Received message from Master: op=Shutter serial=139381 10:18:19 Shutter LASER close 10:18:19 Received message from Master: op=PointingHead serial=139385 10:18:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:18:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:18:20 Point started: ret=0 10:18:20 point_skyscan result=0 10:18:20 Check angles 10:18:20 SkyScan query 10:18:21 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.49<-21566 Statuses=0009 0009 10:18:21 Msec=0 True Az=135.825 Ze=-143.49 Az status=0009 Ze status=0009 10:18:21 Check angles 10:18:21 SkyScan query 10:18:22 SkyScan query done: ret=0 az=153.21<-10214 ze=-122.505<-20167 Statuses=0009 0009 10:18:22 Msec=750 True Az=153.21 Ze=-122.505 Az status=0009 Ze status=0009 10:18:22 Check angles 10:18:22 SkyScan query 10:18:22 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.625<-18775 Statuses=0009 0009 10:18:22 Msec=1500 True Az=170.775 Ze=-101.625 Az status=0009 Ze status=0009 10:18:23 Check angles 10:18:23 SkyScan query 10:18:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.595<-17373 Statuses=0008 0009 10:18:23 Msec=2250 True Az=176.01 Ze=-80.595 Az status=0008 Ze status=0009 10:18:23 Check angles 10:18:23 SkyScan query 10:18:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.67<-15978 Statuses=0008 0009 10:18:24 Msec=3000 True Az=176.01 Ze=-59.67 Az status=0008 Ze status=0009 10:18:24 Check angles 10:18:24 SkyScan query 10:18:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:18:25 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:18:25 Message to Master queued w/err=0: serial=139385 error=0 10:18:30 Received message from Master: op=Filter serial=139386 10:18:30 Color wheel filter change from 0 to 0 10:18:30 FLIGetFilterPos err=0 currentPosition=0 10:18:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:30 Filter is already there-color wheel unchanged 10:18:30 Received message from Master: op=Shutter serial=139387 10:18:30 Shutter LASER close 10:18:30 Received message from Camera: op=State serial=139389 10:18:30 GetSingleValue result=40 Value=cccccccc 10:18:30 SkyScan query 10:18:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:18:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:31 Parameters OK 10:18:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:31 Set A/D data flow result=40 10:18:31 Set A/D channel type result=40 10:18:31 Set A/D encoding result=40 10:18:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:31 Set channel filter=0.000000e+000 result=40 10:18:31 Config A/D Result=40 10:18:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:31 Get A/D filter: -9.255963e+061 result=40 10:18:31 Get A/D value=-858993460 result=40 10:18:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:31 Parameters OK 10:18:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:31 Set A/D data flow result=40 10:18:31 Set A/D channel type result=40 10:18:31 Set A/D encoding result=40 10:18:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:31 Set channel filter=0.000000e+000 result=40 10:18:31 Config A/D Result=40 10:18:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:31 Get A/D filter: -9.255963e+061 result=40 10:18:31 Get A/D value=-858993460 result=40 10:18:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:31 Aux= 10:18:31 Message to Camera, serial 139389 queued 10:19:07 Received message from Master: op=PointingHead serial=139402 10:19:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:19:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:19:08 Point started: ret=0 10:19:08 point_skyscan result=0 10:19:09 Check angles 10:19:09 SkyScan query 10:19:09 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.96<-13464 Statuses=0009 0009 10:19:09 Msec=0 True Az=153.18 Ze=-21.96 Az status=0009 Ze status=0009 10:19:09 Check angles 10:19:09 SkyScan query 10:19:10 SkyScan query done: ret=0 az=135.72<-9048 ze=-0.945<-12063 Statuses=0009 0009 10:19:10 Msec=750 True Az=135.72 Ze=-0.945 Az status=0009 Ze status=0009 10:19:10 Check angles 10:19:10 SkyScan query 10:19:11 SkyScan query done: ret=0 az=117.81<-7854 ze=20.43<-10638 Statuses=0009 0009 10:19:11 Msec=1500 True Az=117.81 Ze=20.43 Az status=0009 Ze status=0009 10:19:11 Check angles 10:19:11 SkyScan query 10:19:11 SkyScan query done: ret=0 az=100.44<-6696 ze=41.415<-9239 Statuses=0009 0009 10:19:11 Msec=2250 True Az=100.44 Ze=41.415 Az status=0009 Ze status=0009 10:19:12 Check angles 10:19:12 SkyScan query 10:19:12 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 10:19:12 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 10:19:12 Check angles 10:19:12 SkyScan query 10:19:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:19:13 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:19:13 Message to Master queued w/err=0: serial=139402 error=0 10:19:18 Received message from Master: op=Filter serial=139403 10:19:18 Color wheel filter change from 0 to 0 10:19:18 FLIGetFilterPos err=0 currentPosition=0 10:19:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:18 Filter is already there-color wheel unchanged 10:19:18 Received message from Master: op=Shutter serial=139404 10:19:18 Shutter LASER close 10:19:18 Received message from Camera: op=State serial=139406 10:19:18 GetSingleValue result=40 Value=cccccccc 10:19:18 SkyScan query 10:19:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:19:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:19 Parameters OK 10:19:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:19 Set A/D data flow result=40 10:19:19 Set A/D channel type result=40 10:19:19 Set A/D encoding result=40 10:19:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:19 Set channel filter=0.000000e+000 result=40 10:19:19 Config A/D Result=40 10:19:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:19 Get A/D filter: -9.255963e+061 result=40 10:19:19 Get A/D value=-858993460 result=40 10:19:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:19 Parameters OK 10:19:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:19 Set A/D data flow result=40 10:19:19 Set A/D channel type result=40 10:19:19 Set A/D encoding result=40 10:19:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:19 Set channel filter=0.000000e+000 result=40 10:19:19 Config A/D Result=40 10:19:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:19 Get A/D filter: -9.255963e+061 result=40 10:19:19 Get A/D value=-858993460 result=40 10:19:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:19 Aux= 10:19:19 Message to Camera, serial 139406 queued 10:19:56 Received message from Master: op=PointingHead serial=139419 10:19:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:19:56 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:19:56 Point started: ret=0 10:19:56 point_skyscan result=0 10:19:57 Check angles 10:19:57 SkyScan query 10:19:57 SkyScan query done: ret=0 az=109.095<-7273 ze=38.49<-9434 Statuses=0009 0008 10:19:57 Msec=0 True Az=109.095 Ze=38.49 Az status=0009 Ze status=0008 10:19:57 Check angles 10:19:57 SkyScan query 10:19:58 SkyScan query done: ret=0 az=126.555<-8437 ze=38.505<-9433 Statuses=0009 0008 10:19:58 Msec=750 True Az=126.555 Ze=38.505 Az status=0009 Ze status=0008 10:19:58 Check angles 10:19:58 SkyScan query 10:19:59 SkyScan query done: ret=0 az=144.075<-9605 ze=38.505<-9433 Statuses=0009 0008 10:19:59 Msec=1500 True Az=144.075 Ze=38.505 Az status=0009 Ze status=0008 10:19:59 Check angles 10:19:59 SkyScan query 10:19:59 SkyScan query done: ret=0 az=161.91<-10794 ze=38.505<-9433 Statuses=0009 0008 10:19:59 Msec=2250 True Az=161.91 Ze=38.505 Az status=0009 Ze status=0008 10:20:00 Check angles 10:20:00 SkyScan query 10:20:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:20:00 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:20:00 Check angles 10:20:00 SkyScan query 10:20:01 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:20:01 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:20:01 Message to Master queued w/err=0: serial=139419 error=0 10:20:06 Received message from Master: op=Filter serial=139420 10:20:06 Color wheel filter change from 0 to 0 10:20:06 FLIGetFilterPos err=0 currentPosition=0 10:20:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:06 Filter is already there-color wheel unchanged 10:20:06 Received message from Master: op=Shutter serial=139421 10:20:06 Shutter LASER close 10:20:06 Received message from Camera: op=State serial=139423 10:20:06 GetSingleValue result=40 Value=cccccccc 10:20:06 SkyScan query 10:20:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:20:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:07 Parameters OK 10:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:07 Set A/D data flow result=40 10:20:07 Set A/D channel type result=40 10:20:07 Set A/D encoding result=40 10:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:07 Set channel filter=0.000000e+000 result=40 10:20:07 Config A/D Result=40 10:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:07 Get A/D filter: -9.255963e+061 result=40 10:20:07 Get A/D value=-858993460 result=40 10:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:07 Parameters OK 10:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:07 Set A/D data flow result=40 10:20:07 Set A/D channel type result=40 10:20:07 Set A/D encoding result=40 10:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:07 Set channel filter=0.000000e+000 result=40 10:20:07 Config A/D Result=40 10:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:07 Get A/D filter: -9.255963e+061 result=40 10:20:07 Get A/D value=-858993460 result=40 10:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:07 Aux= 10:20:07 Message to Camera, serial 139423 queued 10:20:44 Received message from Master: op=PointingHead serial=139436 10:20:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:20:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:20:44 Point started: ret=0 10:20:44 point_skyscan result=0 10:20:45 Check angles 10:20:45 SkyScan query 10:20:45 SkyScan query done: ret=0 az=152.925<-10195 ze=8.67<-11422 Statuses=0009 0009 10:20:45 Msec=0 True Az=152.925 Ze=8.67 Az status=0009 Ze status=0009 10:20:45 Check angles 10:20:45 SkyScan query 10:20:46 SkyScan query done: ret=0 az=135.525<-9035 ze=-12.27<-12818 Statuses=0009 0009 10:20:46 Msec=750 True Az=135.525 Ze=-12.27 Az status=0009 Ze status=0009 10:20:46 Check angles 10:20:46 SkyScan query 10:20:47 SkyScan query done: ret=0 az=117.99<-7866 ze=-33.255<-14217 Statuses=0009 0009 10:20:47 Msec=1500 True Az=117.99 Ze=-33.255 Az status=0009 Ze status=0009 10:20:47 Check angles 10:20:47 SkyScan query 10:20:48 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.54<-15436 Statuses=0009 0009 10:20:48 Msec=2250 True Az=100.62 Ze=-51.54 Az status=0009 Ze status=0009 10:20:48 Check angles 10:20:48 SkyScan query 10:20:48 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:20:48 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:20:48 Check angles 10:20:48 SkyScan query 10:20:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:20:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:20:49 Message to Master queued w/err=0: serial=139436 error=0 10:20:54 Received message from Master: op=Filter serial=139437 10:20:54 Color wheel filter change from 0 to 0 10:20:54 FLIGetFilterPos err=0 currentPosition=0 10:20:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:54 Filter is already there-color wheel unchanged 10:20:54 Received message from Master: op=Shutter serial=139438 10:20:54 Shutter LASER close 10:20:54 Received message from Camera: op=State serial=139440 10:20:54 GetSingleValue result=40 Value=cccccccc 10:20:54 SkyScan query 10:20:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:20:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:55 Parameters OK 10:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:55 Set A/D data flow result=40 10:20:55 Set A/D channel type result=40 10:20:55 Set A/D encoding result=40 10:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:55 Set channel filter=0.000000e+000 result=40 10:20:55 Config A/D Result=40 10:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:55 Get A/D filter: -9.255963e+061 result=40 10:20:55 Get A/D value=-858993460 result=40 10:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:55 Parameters OK 10:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:55 Set A/D data flow result=40 10:20:55 Set A/D channel type result=40 10:20:55 Set A/D encoding result=40 10:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:55 Set channel filter=0.000000e+000 result=40 10:20:55 Config A/D Result=40 10:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:55 Get A/D filter: -9.255963e+061 result=40 10:20:55 Get A/D value=-858993460 result=40 10:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:55 Aux= 10:20:55 Message to Camera, serial 139440 queued 10:21:32 Received message from Master: op=PointingHead serial=139453 10:21:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:21:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:21:32 Point started: ret=0 10:21:32 point_skyscan result=0 10:21:33 Check angles 10:21:33 SkyScan query 10:21:33 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.585<-17439 Statuses=0009 0009 10:21:33 Msec=0 True Az=109.2 Ze=-81.585 Az status=0009 Ze status=0009 10:21:34 Check angles 10:21:34 SkyScan query 10:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 10:21:34 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 10:21:34 Check angles 10:21:34 SkyScan query 10:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.51<-20234 Statuses=0008 0009 10:21:35 Msec=1500 True Az=112.995 Ze=-123.51 Az status=0008 Ze status=0009 10:21:35 Check angles 10:21:35 SkyScan query 10:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.435<-21629 Statuses=0008 0009 10:21:36 Msec=2250 True Az=112.995 Ze=-144.435 Az status=0008 Ze status=0009 10:21:36 Check angles 10:21:36 SkyScan query 10:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.375<-23025 Statuses=0008 0009 10:21:36 Msec=3000 True Az=112.995 Ze=-165.375 Az status=0008 Ze status=0009 10:21:37 Check angles 10:21:37 SkyScan query 10:21:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:21:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:21:37 Message to Master queued w/err=0: serial=139453 error=0 10:21:42 Received message from Master: op=Filter serial=139454 10:21:42 Color wheel filter change from 0 to 0 10:21:42 FLIGetFilterPos err=0 currentPosition=0 10:21:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:42 Filter is already there-color wheel unchanged 10:21:42 Received message from Master: op=Shutter serial=139455 10:21:42 Shutter LASER open 10:21:42 Received message from Camera: op=State serial=139457 10:21:42 GetSingleValue result=40 Value=cccccccc 10:21:42 SkyScan query 10:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:21:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:43 Parameters OK 10:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:43 Set A/D data flow result=40 10:21:43 Set A/D channel type result=40 10:21:43 Set A/D encoding result=40 10:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:43 Set channel filter=0.000000e+000 result=40 10:21:43 Config A/D Result=40 10:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:43 Get A/D filter: -9.255963e+061 result=40 10:21:43 Get A/D value=-858993460 result=40 10:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:43 Parameters OK 10:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:43 Set A/D data flow result=40 10:21:43 Set A/D channel type result=40 10:21:43 Set A/D encoding result=40 10:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:43 Set channel filter=0.000000e+000 result=40 10:21:43 Config A/D Result=40 10:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:43 Get A/D filter: -9.255963e+061 result=40 10:21:43 Get A/D value=-858993460 result=40 10:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:43 Aux= 10:21:43 Message to Camera, serial 139457 queued 10:21:51 Received message from Master: op=Shutter serial=139467 10:21:51 Shutter LASER close 10:21:52 Received message from Master: op=PointingHead serial=139471 10:21:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:21:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:21:52 Point started: ret=0 10:21:52 point_skyscan result=0 10:21:53 Check angles 10:21:53 SkyScan query 10:21:54 SkyScan query done: ret=0 az=89.865<-5991 ze=157.155<-1523 Statuses=0009 0009 10:21:54 Msec=0 True Az=89.865 Ze=157.155 Az status=0009 Ze status=0009 10:21:54 Check angles 10:21:54 SkyScan query 10:21:54 SkyScan query done: ret=0 az=72.285<-4819 ze=136.215<-2919 Statuses=0009 0009 10:21:54 Msec=750 True Az=72.285 Ze=136.215 Az status=0009 Ze status=0009 10:21:54 Check angles 10:21:54 SkyScan query 10:21:55 SkyScan query done: ret=0 az=54.975<-3665 ze=115.29<-4314 Statuses=0009 0009 10:21:55 Msec=1500 True Az=54.975 Ze=115.29 Az status=0009 Ze status=0009 10:21:55 Check angles 10:21:55 SkyScan query 10:21:56 SkyScan query done: ret=0 az=40.98<-2732 ze=94.26<-5716 Statuses=0009 0009 10:21:56 Msec=2250 True Az=40.98 Ze=94.26 Az status=0009 Ze status=0009 10:21:56 Check angles 10:21:56 SkyScan query 10:21:57 SkyScan query done: ret=0 az=40.995<-2733 ze=73.305<-7113 Statuses=0008 0009 10:21:57 Msec=3000 True Az=40.995 Ze=73.305 Az status=0008 Ze status=0009 10:21:57 Check angles 10:21:57 SkyScan query 10:21:57 SkyScan query done: ret=0 az=40.995<-2733 ze=52.785<-8481 Statuses=0008 0009 10:21:57 Msec=3750 True Az=40.995 Ze=52.785 Az status=0008 Ze status=0009 10:21:57 Check angles 10:21:57 SkyScan query 10:21:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:21:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:21:58 Message to Master queued w/err=0: serial=139471 error=0 10:22:03 Received message from Master: op=Filter serial=139472 10:22:03 Color wheel filter change from 0 to 0 10:22:03 FLIGetFilterPos err=0 currentPosition=0 10:22:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:03 Filter is already there-color wheel unchanged 10:22:03 Received message from Master: op=Shutter serial=139473 10:22:03 Shutter LASER close 10:22:03 Received message from Camera: op=State serial=139475 10:22:03 GetSingleValue result=40 Value=cccccccc 10:22:03 SkyScan query 10:22:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:22:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:04 Parameters OK 10:22:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:04 Set A/D data flow result=40 10:22:04 Set A/D channel type result=40 10:22:04 Set A/D encoding result=40 10:22:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:04 Set channel filter=0.000000e+000 result=40 10:22:04 Config A/D Result=40 10:22:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:04 Get A/D filter: -9.255963e+061 result=40 10:22:04 Get A/D value=-858993460 result=40 10:22:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:04 Parameters OK 10:22:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:04 Set A/D data flow result=40 10:22:04 Set A/D channel type result=40 10:22:04 Set A/D encoding result=40 10:22:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:04 Set channel filter=0.000000e+000 result=40 10:22:04 Config A/D Result=40 10:22:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:04 Get A/D filter: -9.255963e+061 result=40 10:22:04 Get A/D value=-858993460 result=40 10:22:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:04 Aux= 10:22:04 Message to Camera, serial 139475 queued 10:22:41 Received message from Master: op=PointingHead serial=139488 10:22:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:22:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:22:41 Point started: ret=0 10:22:41 point_skyscan result=0 10:22:42 Check angles 10:22:42 SkyScan query 10:22:42 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 10:22:42 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 10:22:43 Check angles 10:22:43 SkyScan query 10:22:43 SkyScan query done: ret=0 az=81.555<-5437 ze=66.51<-7566 Statuses=0009 0008 10:22:43 Msec=750 True Az=81.555 Ze=66.51 Az status=0009 Ze status=0008 10:22:43 Check angles 10:22:43 SkyScan query 10:22:44 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 10:22:44 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 10:22:44 Check angles 10:22:44 SkyScan query 10:22:45 SkyScan query done: ret=0 az=116.835<-7789 ze=66.495<-7567 Statuses=0009 0008 10:22:45 Msec=2250 True Az=116.835 Ze=66.495 Az status=0009 Ze status=0008 10:22:45 Check angles 10:22:45 SkyScan query 10:22:45 SkyScan query done: ret=0 az=134.34<-8956 ze=66.495<-7567 Statuses=0009 0008 10:22:45 Msec=3000 True Az=134.34 Ze=66.495 Az status=0009 Ze status=0008 10:22:46 Check angles 10:22:46 SkyScan query 10:22:46 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 10:22:46 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 10:22:46 Check angles 10:22:46 SkyScan query 10:22:47 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:22:47 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:22:47 Message to Master queued w/err=0: serial=139488 error=0 10:22:52 Received message from Master: op=Filter serial=139489 10:22:52 Color wheel filter change from 0 to 0 10:22:52 FLIGetFilterPos err=0 currentPosition=0 10:22:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:52 Filter is already there-color wheel unchanged 10:22:52 Received message from Master: op=Shutter serial=139490 10:22:52 Shutter LASER close 10:22:52 Received message from Camera: op=State serial=139492 10:22:52 GetSingleValue result=40 Value=cccccccc 10:22:52 SkyScan query 10:22:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:22:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:53 Parameters OK 10:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:53 Set A/D data flow result=40 10:22:53 Set A/D channel type result=40 10:22:53 Set A/D encoding result=40 10:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:53 Set channel filter=0.000000e+000 result=40 10:22:53 Config A/D Result=40 10:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:53 Get A/D filter: -9.255963e+061 result=40 10:22:53 Get A/D value=-858993460 result=40 10:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:53 Parameters OK 10:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:53 Set A/D data flow result=40 10:22:53 Set A/D channel type result=40 10:22:53 Set A/D encoding result=40 10:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:53 Set channel filter=0.000000e+000 result=40 10:22:53 Config A/D Result=40 10:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:53 Get A/D filter: -9.255963e+061 result=40 10:22:53 Get A/D value=-858993460 result=40 10:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:53 Aux= 10:22:53 Message to Camera, serial 139492 queued 10:23:30 Received message from Master: op=PointingHead serial=139505 10:23:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:23:30 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:23:30 Point started: ret=0 10:23:30 point_skyscan result=0 10:23:31 Check angles 10:23:31 SkyScan query 10:23:31 SkyScan query done: ret=0 az=134.55<-8970 ze=36.195<-9587 Statuses=0009 0009 10:23:31 Msec=0 True Az=134.55 Ze=36.195 Az status=0009 Ze status=0009 10:23:32 Check angles 10:23:32 SkyScan query 10:23:32 SkyScan query done: ret=0 az=116.67<-7778 ze=14.79<-11014 Statuses=0009 0009 10:23:32 Msec=750 True Az=116.67 Ze=14.79 Az status=0009 Ze status=0009 10:23:32 Check angles 10:23:32 SkyScan query 10:23:33 SkyScan query done: ret=0 az=99.15<-6610 ze=-6.195<-12413 Statuses=0009 0009 10:23:33 Msec=1500 True Az=99.15 Ze=-6.195 Az status=0009 Ze status=0009 10:23:33 Check angles 10:23:33 SkyScan query 10:23:34 SkyScan query done: ret=0 az=81.825<-5455 ze=-27.12<-13808 Statuses=0009 0009 10:23:34 Msec=2250 True Az=81.825 Ze=-27.12 Az status=0009 Ze status=0009 10:23:34 Check angles 10:23:34 SkyScan query 10:23:34 SkyScan query done: ret=0 az=64.005<-4267 ze=-38.58<-14572 Statuses=0009 0008 10:23:34 Msec=3000 True Az=64.005 Ze=-38.58 Az status=0009 Ze status=0008 10:23:35 Check angles 10:23:35 SkyScan query 10:23:35 SkyScan query done: ret=0 az=46.53<-3102 ze=-38.52<-14568 Statuses=0009 0008 10:23:35 Msec=3750 True Az=46.53 Ze=-38.52 Az status=0009 Ze status=0008 10:23:35 Check angles 10:23:35 SkyScan query 10:23:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:23:36 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:23:36 Message to Master queued w/err=0: serial=139505 error=0 10:23:41 Received message from Master: op=Filter serial=139506 10:23:41 Color wheel filter change from 0 to 0 10:23:41 FLIGetFilterPos err=0 currentPosition=0 10:23:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:41 Filter is already there-color wheel unchanged 10:23:41 Received message from Master: op=Shutter serial=139507 10:23:41 Shutter LASER close 10:23:41 Received message from Camera: op=State serial=139509 10:23:41 GetSingleValue result=40 Value=cccccccc 10:23:41 SkyScan query 10:23:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:23:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:42 Parameters OK 10:23:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:42 Set A/D data flow result=40 10:23:42 Set A/D channel type result=40 10:23:42 Set A/D encoding result=40 10:23:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:42 Set channel filter=0.000000e+000 result=40 10:23:42 Config A/D Result=40 10:23:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:42 Get A/D filter: -9.255963e+061 result=40 10:23:42 Get A/D value=-858993460 result=40 10:23:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:42 Parameters OK 10:23:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:42 Set A/D data flow result=40 10:23:42 Set A/D channel type result=40 10:23:42 Set A/D encoding result=40 10:23:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:42 Set channel filter=0.000000e+000 result=40 10:23:42 Config A/D Result=40 10:23:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:42 Get A/D filter: -9.255963e+061 result=40 10:23:42 Get A/D value=-858993460 result=40 10:23:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:42 Aux= 10:23:42 Message to Camera, serial 139509 queued 10:24:18 Received message from Master: op=PointingHead serial=139521 10:24:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:24:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:24:18 Point started: ret=0 10:24:18 point_skyscan result=0 10:24:19 Check angles 10:24:19 SkyScan query 10:24:19 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.055<-16537 Statuses=0009 0009 10:24:19 Msec=0 True Az=63.78 Ze=-68.055 Az status=0009 Ze status=0009 10:24:19 Check angles 10:24:19 SkyScan query 10:24:20 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.025<-17935 Statuses=0009 0009 10:24:20 Msec=750 True Az=81.36 Ze=-89.025 Az status=0009 Ze status=0009 10:24:20 Check angles 10:24:20 SkyScan query 10:24:21 SkyScan query done: ret=0 az=98.745<-6583 ze=-109.95<-19330 Statuses=0009 0009 10:24:21 Msec=1500 True Az=98.745 Ze=-109.95 Az status=0009 Ze status=0009 10:24:21 Check angles 10:24:21 SkyScan query 10:24:21 SkyScan query done: ret=0 az=116.175<-7745 ze=-130.935<-20729 Statuses=0009 0009 10:24:21 Msec=2250 True Az=116.175 Ze=-130.935 Az status=0009 Ze status=0009 10:24:22 Check angles 10:24:22 SkyScan query 10:24:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 10:24:22 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 10:24:22 Check angles 10:24:22 SkyScan query 10:24:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 10:24:23 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 10:24:23 Message to Master queued w/err=0: serial=139521 error=0 10:24:28 Received message from Master: op=Filter serial=139522 10:24:28 Color wheel filter change from 0 to 0 10:24:28 FLIGetFilterPos err=0 currentPosition=0 10:24:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:28 Filter is already there-color wheel unchanged 10:24:28 Received message from Master: op=Shutter serial=139523 10:24:28 Shutter LASER close 10:24:28 Received message from Camera: op=State serial=139525 10:24:28 GetSingleValue result=40 Value=cccccccc 10:24:28 SkyScan query 10:24:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:24:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:29 Parameters OK 10:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:29 Set A/D data flow result=40 10:24:29 Set A/D channel type result=40 10:24:29 Set A/D encoding result=40 10:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:29 Set channel filter=0.000000e+000 result=40 10:24:29 Config A/D Result=40 10:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:29 Get A/D filter: -9.255963e+061 result=40 10:24:29 Get A/D value=-858993460 result=40 10:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:29 Parameters OK 10:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:29 Set A/D data flow result=40 10:24:29 Set A/D channel type result=40 10:24:29 Set A/D encoding result=40 10:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:29 Set channel filter=0.000000e+000 result=40 10:24:29 Config A/D Result=40 10:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:29 Get A/D filter: -9.255963e+061 result=40 10:24:29 Get A/D value=-858993460 result=40 10:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:29 Aux= 10:24:29 Message to Camera, serial 139525 queued 10:25:06 Received message from Master: op=PointingHead serial=139538 10:25:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:25:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:25:06 Point started: ret=0 10:25:06 point_skyscan result=0 10:25:07 Check angles 10:25:07 SkyScan query 10:25:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.09<-23406 Statuses=0009 0009 10:25:07 Msec=0 True Az=112.995 Ze=-171.09 Az status=0009 Ze status=0009 10:25:07 Check angles 10:25:07 SkyScan query 10:25:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:25:08 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:25:08 Message to Master queued w/err=0: serial=139538 error=0 10:25:13 Received message from Master: op=Filter serial=139539 10:25:13 Color wheel filter change from 0 to 0 10:25:13 FLIGetFilterPos err=0 currentPosition=0 10:25:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:13 Filter is already there-color wheel unchanged 10:25:13 Received message from Master: op=Shutter serial=139540 10:25:13 Shutter LASER open 10:25:13 Received message from Camera: op=State serial=139542 10:25:13 GetSingleValue result=40 Value=cccccccc 10:25:13 SkyScan query 10:25:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:25:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:14 Parameters OK 10:25:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:14 Set A/D data flow result=40 10:25:14 Set A/D channel type result=40 10:25:14 Set A/D encoding result=40 10:25:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:14 Set channel filter=0.000000e+000 result=40 10:25:14 Config A/D Result=40 10:25:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:14 Get A/D filter: -9.255963e+061 result=40 10:25:14 Get A/D value=-858993460 result=40 10:25:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:14 Parameters OK 10:25:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:14 Set A/D data flow result=40 10:25:14 Set A/D channel type result=40 10:25:14 Set A/D encoding result=40 10:25:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:14 Set channel filter=0.000000e+000 result=40 10:25:14 Config A/D Result=40 10:25:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:14 Get A/D filter: -9.255963e+061 result=40 10:25:14 Get A/D value=-858993460 result=40 10:25:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:14 Aux= 10:25:14 Message to Camera, serial 139542 queued 10:25:22 Received message from Master: op=Shutter serial=139552 10:25:22 Shutter LASER close 10:25:23 Received message from Master: op=PointingHead serial=139556 10:25:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:25:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:25:23 Point started: ret=0 10:25:23 point_skyscan result=0 10:25:24 Check angles 10:25:24 SkyScan query 10:25:25 SkyScan query done: ret=0 az=136.2<-9080 ze=-142.875<-21525 Statuses=0009 0009 10:25:25 Msec=0 True Az=136.2 Ze=-142.875 Az status=0009 Ze status=0009 10:25:25 Check angles 10:25:25 SkyScan query 10:25:25 SkyScan query done: ret=0 az=154.185<-10279 ze=-121.56<-20104 Statuses=0009 0009 10:25:25 Msec=750 True Az=154.185 Ze=-121.56 Az status=0009 Ze status=0009 10:25:26 Check angles 10:25:26 SkyScan query 10:25:26 SkyScan query done: ret=0 az=171.93<-11462 ze=-100.125<-18675 Statuses=0009 0009 10:25:26 Msec=1500 True Az=171.93 Ze=-100.125 Az status=0009 Ze status=0009 10:25:26 Check angles 10:25:26 SkyScan query 10:25:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.17<-17278 Statuses=0008 0009 10:25:27 Msec=2250 True Az=176.01 Ze=-79.17 Az status=0008 Ze status=0009 10:25:27 Check angles 10:25:27 SkyScan query 10:25:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-57.825<-15855 Statuses=0008 0009 10:25:28 Msec=3000 True Az=176.01 Ze=-57.825 Az status=0008 Ze status=0009 10:25:28 Check angles 10:25:28 SkyScan query 10:25:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:25:29 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:25:29 Message to Master queued w/err=0: serial=139556 error=0 10:25:34 Received message from Master: op=Filter serial=139557 10:25:34 Color wheel filter change from 0 to 0 10:25:34 FLIGetFilterPos err=0 currentPosition=0 10:25:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:34 Filter is already there-color wheel unchanged 10:25:34 Received message from Master: op=Shutter serial=139558 10:25:34 Shutter LASER close 10:25:34 Received message from Camera: op=State serial=139560 10:25:34 GetSingleValue result=40 Value=cccccccc 10:25:34 SkyScan query 10:25:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:25:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:34 Parameters OK 10:25:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:34 Set A/D data flow result=40 10:25:34 Set A/D channel type result=40 10:25:34 Set A/D encoding result=40 10:25:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:34 Set channel filter=0.000000e+000 result=40 10:25:34 Config A/D Result=40 10:25:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:34 Get A/D filter: -9.255963e+061 result=40 10:25:34 Get A/D value=-858993460 result=40 10:25:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:34 Parameters OK 10:25:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:34 Set A/D data flow result=40 10:25:34 Set A/D channel type result=40 10:25:34 Set A/D encoding result=40 10:25:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:34 Set channel filter=0.000000e+000 result=40 10:25:34 Config A/D Result=40 10:25:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:34 Get A/D filter: -9.255963e+061 result=40 10:25:34 Get A/D value=-858993460 result=40 10:25:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:34 Aux= 10:25:34 Message to Camera, serial 139560 queued 10:26:11 Received message from Master: op=PointingHead serial=139573 10:26:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:26:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:26:12 Point started: ret=0 10:26:12 point_skyscan result=0 10:26:12 Check angles 10:26:12 SkyScan query 10:26:13 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.035<-13469 Statuses=0009 0009 10:26:13 Msec=0 True Az=153.21 Ze=-22.035 Az status=0009 Ze status=0009 10:26:13 Check angles 10:26:13 SkyScan query 10:26:14 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.495<-12033 Statuses=0009 0009 10:26:14 Msec=750 True Az=135.36 Ze=-0.495 Az status=0009 Ze status=0009 10:26:14 Check angles 10:26:14 SkyScan query [UTC 2018-12-14 10:26:14] 10:26:14 SkyScan query done: ret=0 az=117.48<-7832 ze=20.805<-10613 Statuses=0009 0009 10:26:14 Msec=1500 True Az=117.48 Ze=20.805 Az status=0009 Ze status=0009 10:26:15 Check angles 10:26:15 SkyScan query 10:26:15 SkyScan query done: ret=0 az=100.095<-6673 ze=41.745<-9217 Statuses=0009 0009 10:26:15 Msec=2250 True Az=100.095 Ze=41.745 Az status=0009 Ze status=0009 10:26:15 Check angles 10:26:15 SkyScan query 10:26:16 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 10:26:16 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 10:26:16 Check angles 10:26:16 SkyScan query 10:26:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:26:17 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:26:17 Message to Master queued w/err=0: serial=139573 error=0 10:26:22 Received message from Master: op=Filter serial=139574 10:26:22 Color wheel filter change from 0 to 0 10:26:22 FLIGetFilterPos err=0 currentPosition=0 10:26:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:22 Filter is already there-color wheel unchanged 10:26:22 Received message from Master: op=Shutter serial=139575 10:26:22 Shutter LASER close 10:26:22 Received message from Camera: op=State serial=139577 10:26:22 GetSingleValue result=40 Value=cccccccc 10:26:22 SkyScan query 10:26:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:26:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:22 Parameters OK 10:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:22 Set A/D data flow result=40 10:26:22 Set A/D channel type result=40 10:26:22 Set A/D encoding result=40 10:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:22 Set channel filter=0.000000e+000 result=40 10:26:22 Config A/D Result=40 10:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:22 Get A/D filter: -9.255963e+061 result=40 10:26:22 Get A/D value=-858993460 result=40 10:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:22 Parameters OK 10:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:22 Set A/D data flow result=40 10:26:22 Set A/D channel type result=40 10:26:22 Set A/D encoding result=40 10:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:22 Set channel filter=0.000000e+000 result=40 10:26:22 Config A/D Result=40 10:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:22 Get A/D filter: -9.255963e+061 result=40 10:26:22 Get A/D value=-858993460 result=40 10:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:22 Aux= 10:26:22 Message to Camera, serial 139577 queued 10:26:59 Received message from Master: op=PointingHead serial=139590 10:26:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:26:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:27:00 Point started: ret=0 10:27:00 point_skyscan result=0 10:27:00 Check angles 10:27:00 SkyScan query 10:27:01 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 10:27:01 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 10:27:01 Check angles 10:27:01 SkyScan query 10:27:02 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 10:27:02 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 10:27:02 Check angles 10:27:02 SkyScan query 10:27:02 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 10:27:02 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 10:27:03 Check angles 10:27:03 SkyScan query 10:27:03 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 10:27:03 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 10:27:03 Check angles 10:27:03 SkyScan query 10:27:04 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:27:04 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:27:04 Check angles 10:27:04 SkyScan query 10:27:05 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:27:05 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:27:05 Message to Master queued w/err=0: serial=139590 error=0 10:27:10 Received message from Master: op=Filter serial=139591 10:27:10 Color wheel filter change from 0 to 0 10:27:10 FLIGetFilterPos err=0 currentPosition=0 10:27:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:10 Filter is already there-color wheel unchanged 10:27:10 Received message from Master: op=Shutter serial=139592 10:27:10 Shutter LASER close 10:27:10 Received message from Camera: op=State serial=139594 10:27:10 GetSingleValue result=40 Value=cccccccc 10:27:10 SkyScan query 10:27:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:27:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:11 Parameters OK 10:27:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:11 Set A/D data flow result=40 10:27:11 Set A/D channel type result=40 10:27:11 Set A/D encoding result=40 10:27:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:11 Set channel filter=0.000000e+000 result=40 10:27:11 Config A/D Result=40 10:27:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:11 Get A/D filter: -9.255963e+061 result=40 10:27:11 Get A/D value=-858993460 result=40 10:27:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:11 Parameters OK 10:27:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:11 Set A/D data flow result=40 10:27:11 Set A/D channel type result=40 10:27:11 Set A/D encoding result=40 10:27:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:11 Set channel filter=0.000000e+000 result=40 10:27:11 Config A/D Result=40 10:27:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:11 Get A/D filter: -9.255963e+061 result=40 10:27:11 Get A/D value=-858993460 result=40 10:27:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:11 Aux= 10:27:11 Message to Camera, serial 139594 queued 10:27:47 Received message from Master: op=PointingHead serial=139607 10:27:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:27:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:27:48 Point started: ret=0 10:27:48 point_skyscan result=0 10:27:48 Check angles 10:27:48 SkyScan query 10:27:49 SkyScan query done: ret=0 az=152.91<-10194 ze=8.52<-11432 Statuses=0009 0009 10:27:49 Msec=0 True Az=152.91 Ze=8.52 Az status=0009 Ze status=0009 10:27:49 Check angles 10:27:49 SkyScan query 10:27:50 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.435<-12829 Statuses=0009 0009 10:27:50 Msec=750 True Az=135.375 Ze=-12.435 Az status=0009 Ze status=0009 10:27:50 Check angles 10:27:50 SkyScan query 10:27:51 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.405<-14227 Statuses=0009 0009 10:27:51 Msec=1500 True Az=117.795 Ze=-33.405 Az status=0009 Ze status=0009 10:27:51 Check angles 10:27:51 SkyScan query 10:27:51 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.555<-15437 Statuses=0009 0009 10:27:51 Msec=2250 True Az=100.44 Ze=-51.555 Az status=0009 Ze status=0009 10:27:51 Check angles 10:27:51 SkyScan query 10:27:52 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 10:27:52 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 10:27:52 Check angles 10:27:52 SkyScan query 10:27:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:27:53 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:27:53 Message to Master queued w/err=0: serial=139607 error=0 10:27:58 Received message from Master: op=Filter serial=139608 10:27:58 Color wheel filter change from 0 to 0 10:27:58 FLIGetFilterPos err=0 currentPosition=0 10:27:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:58 Filter is already there-color wheel unchanged 10:27:58 Received message from Master: op=Shutter serial=139609 10:27:58 Shutter LASER close 10:27:58 Received message from Camera: op=State serial=139611 10:27:58 GetSingleValue result=40 Value=cccccccc 10:27:58 SkyScan query 10:27:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:27:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:59 Parameters OK 10:27:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:59 Set A/D data flow result=40 10:27:59 Set A/D channel type result=40 10:27:59 Set A/D encoding result=40 10:27:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:59 Set channel filter=0.000000e+000 result=40 10:27:59 Config A/D Result=40 10:27:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:59 Get A/D filter: -9.255963e+061 result=40 10:27:59 Get A/D value=-858993460 result=40 10:27:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:59 Parameters OK 10:27:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:59 Set A/D data flow result=40 10:27:59 Set A/D channel type result=40 10:27:59 Set A/D encoding result=40 10:27:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:59 Set channel filter=0.000000e+000 result=40 10:27:59 Config A/D Result=40 10:27:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:59 Get A/D filter: -9.255963e+061 result=40 10:27:59 Get A/D value=-858993460 result=40 10:27:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:59 Aux= 10:27:59 Message to Camera, serial 139611 queued 10:28:35 Received message from Master: op=PointingHead serial=139624 10:28:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:28:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:28:36 Point started: ret=0 10:28:36 point_skyscan result=0 10:28:37 Check angles 10:28:37 SkyScan query 10:28:37 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.27<-17418 Statuses=0009 0009 10:28:37 Msec=0 True Az=108.99 Ze=-81.27 Az status=0009 Ze status=0009 10:28:37 Check angles 10:28:37 SkyScan query 10:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.24<-18816 Statuses=0008 0009 10:28:38 Msec=750 True Az=112.995 Ze=-102.24 Az status=0008 Ze status=0009 10:28:38 Check angles 10:28:38 SkyScan query 10:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.195<-20213 Statuses=0008 0009 10:28:39 Msec=1500 True Az=112.995 Ze=-123.195 Az status=0008 Ze status=0009 10:28:39 Check angles 10:28:39 SkyScan query 10:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.57<-21638 Statuses=0008 0009 10:28:39 Msec=2250 True Az=112.995 Ze=-144.57 Az status=0008 Ze status=0009 10:28:40 Check angles 10:28:40 SkyScan query 10:28:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.525<-23035 Statuses=0008 0009 10:28:40 Msec=3000 True Az=112.995 Ze=-165.525 Az status=0008 Ze status=0009 10:28:40 Check angles 10:28:40 SkyScan query 10:28:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 10:28:41 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 10:28:41 Message to Master queued w/err=0: serial=139624 error=0 10:28:46 Received message from Master: op=Filter serial=139625 10:28:46 Color wheel filter change from 0 to 0 10:28:46 FLIGetFilterPos err=0 currentPosition=0 10:28:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:46 Filter is already there-color wheel unchanged 10:28:46 Received message from Master: op=Shutter serial=139626 10:28:46 Shutter LASER open 10:28:46 Received message from Camera: op=State serial=139628 10:28:46 GetSingleValue result=40 Value=cccccccc 10:28:46 SkyScan query 10:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:28:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:47 Parameters OK 10:28:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:47 Set A/D data flow result=40 10:28:47 Set A/D channel type result=40 10:28:47 Set A/D encoding result=40 10:28:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:47 Set channel filter=0.000000e+000 result=40 10:28:47 Config A/D Result=40 10:28:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:47 Get A/D filter: -9.255963e+061 result=40 10:28:47 Get A/D value=-858993460 result=40 10:28:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:47 Parameters OK 10:28:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:47 Set A/D data flow result=40 10:28:47 Set A/D channel type result=40 10:28:47 Set A/D encoding result=40 10:28:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:47 Set channel filter=0.000000e+000 result=40 10:28:47 Config A/D Result=40 10:28:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:47 Get A/D filter: -9.255963e+061 result=40 10:28:47 Get A/D value=-858993460 result=40 10:28:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:47 Aux= 10:28:47 Message to Camera, serial 139628 queued 10:28:55 Received message from Master: op=Shutter serial=139638 10:28:55 Shutter LASER close 10:28:56 Received message from Master: op=PointingHead serial=139642 10:28:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:28:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:28:56 Point started: ret=0 10:28:56 point_skyscan result=0 10:28:57 Check angles 10:28:57 SkyScan query 10:28:57 SkyScan query done: ret=0 az=89.79<-5986 ze=157.125<-1525 Statuses=0009 0009 10:28:57 Msec=0 True Az=89.79 Ze=157.125 Az status=0009 Ze status=0009 10:28:58 Check angles 10:28:58 SkyScan query 10:28:58 SkyScan query done: ret=0 az=71.94<-4796 ze=135.735<-2951 Statuses=0009 0009 10:28:58 Msec=750 True Az=71.94 Ze=135.735 Az status=0009 Ze status=0009 10:28:58 Check angles 10:28:58 SkyScan query 10:28:59 SkyScan query done: ret=0 az=54.525<-3635 ze=114.735<-4351 Statuses=0009 0009 10:28:59 Msec=1500 True Az=54.525 Ze=114.735 Az status=0009 Ze status=0009 10:28:59 Check angles 10:28:59 SkyScan query 10:29:00 SkyScan query done: ret=0 az=40.98<-2732 ze=93.825<-5745 Statuses=0009 0009 10:29:00 Msec=2250 True Az=40.98 Ze=93.825 Az status=0009 Ze status=0009 10:29:00 Check angles 10:29:00 SkyScan query 10:29:00 SkyScan query done: ret=0 az=40.98<-2732 ze=72.405<-7173 Statuses=0008 0009 10:29:00 Msec=3000 True Az=40.98 Ze=72.405 Az status=0008 Ze status=0009 10:29:01 Check angles 10:29:01 SkyScan query 10:29:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.245<-8517 Statuses=0008 0009 10:29:01 Msec=3750 True Az=40.995 Ze=52.245 Az status=0008 Ze status=0009 10:29:01 Check angles 10:29:01 SkyScan query 10:29:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:29:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:29:02 Message to Master queued w/err=0: serial=139642 error=0 10:29:07 Received message from Master: op=Filter serial=139643 10:29:07 Color wheel filter change from 0 to 0 10:29:07 FLIGetFilterPos err=0 currentPosition=0 10:29:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:07 Filter is already there-color wheel unchanged 10:29:07 Received message from Master: op=Shutter serial=139644 10:29:07 Shutter LASER close 10:29:07 Received message from Camera: op=State serial=139646 10:29:07 GetSingleValue result=40 Value=cccccccc 10:29:07 SkyScan query 10:29:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:29:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:08 Parameters OK 10:29:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:08 Set A/D data flow result=40 10:29:08 Set A/D channel type result=40 10:29:08 Set A/D encoding result=40 10:29:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:08 Set channel filter=0.000000e+000 result=40 10:29:08 Config A/D Result=40 10:29:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:08 Get A/D filter: -9.255963e+061 result=40 10:29:08 Get A/D value=-858993460 result=40 10:29:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:08 Parameters OK 10:29:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:08 Set A/D data flow result=40 10:29:08 Set A/D channel type result=40 10:29:08 Set A/D encoding result=40 10:29:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:08 Set channel filter=0.000000e+000 result=40 10:29:08 Config A/D Result=40 10:29:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:08 Get A/D filter: -9.255963e+061 result=40 10:29:08 Get A/D value=-858993460 result=40 10:29:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:08 Aux= 10:29:08 Message to Camera, serial 139646 queued 10:29:45 Received message from Master: op=PointingHead serial=139659 10:29:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:29:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:29:45 Point started: ret=0 10:29:45 point_skyscan result=0 10:29:46 Check angles 10:29:46 SkyScan query 10:29:46 SkyScan query done: ret=0 az=64.125<-4275 ze=66.555<-7563 Statuses=0009 0008 10:29:46 Msec=0 True Az=64.125 Ze=66.555 Az status=0009 Ze status=0008 10:29:46 Check angles 10:29:46 SkyScan query 10:29:47 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 10:29:47 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 10:29:47 Check angles 10:29:47 SkyScan query 10:29:48 SkyScan query done: ret=0 az=99.06<-6604 ze=66.495<-7567 Statuses=0009 0008 10:29:48 Msec=1500 True Az=99.06 Ze=66.495 Az status=0009 Ze status=0008 10:29:48 Check angles 10:29:48 SkyScan query 10:29:49 SkyScan query done: ret=0 az=116.595<-7773 ze=66.495<-7567 Statuses=0009 0008 10:29:49 Msec=2250 True Az=116.595 Ze=66.495 Az status=0009 Ze status=0008 10:29:49 Check angles 10:29:49 SkyScan query 10:29:49 SkyScan query done: ret=0 az=134.01<-8934 ze=66.495<-7567 Statuses=0009 0008 10:29:49 Msec=3000 True Az=134.01 Ze=66.495 Az status=0009 Ze status=0008 10:29:49 Check angles 10:29:49 SkyScan query 10:29:50 SkyScan query done: ret=0 az=151.845<-10123 ze=66.495<-7567 Statuses=0009 0008 10:29:50 Msec=3750 True Az=151.845 Ze=66.495 Az status=0009 Ze status=0008 10:29:50 Check angles 10:29:50 SkyScan query 10:29:51 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:29:51 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:29:51 Message to Master queued w/err=0: serial=139659 error=0 10:29:56 Received message from Master: op=Filter serial=139660 10:29:56 Color wheel filter change from 0 to 0 10:29:56 FLIGetFilterPos err=0 currentPosition=0 10:29:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:56 Filter is already there-color wheel unchanged 10:29:56 Received message from Master: op=Shutter serial=139661 10:29:56 Shutter LASER close 10:29:56 Received message from Camera: op=State serial=139663 10:29:56 GetSingleValue result=40 Value=cccccccc 10:29:56 SkyScan query 10:29:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:29:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:57 Parameters OK 10:29:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:57 Set A/D data flow result=40 10:29:57 Set A/D channel type result=40 10:29:57 Set A/D encoding result=40 10:29:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:57 Set channel filter=0.000000e+000 result=40 10:29:57 Config A/D Result=40 10:29:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:57 Get A/D filter: -9.255963e+061 result=40 10:29:57 Get A/D value=-858993460 result=40 10:29:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:57 Parameters OK 10:29:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:57 Set A/D data flow result=40 10:29:57 Set A/D channel type result=40 10:29:57 Set A/D encoding result=40 10:29:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:57 Set channel filter=0.000000e+000 result=40 10:29:57 Config A/D Result=40 10:29:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:57 Get A/D filter: -9.255963e+061 result=40 10:29:57 Get A/D value=-858993460 result=40 10:29:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:57 Aux= 10:29:57 Message to Camera, serial 139663 queued 10:30:33 Received message from Master: op=PointingHead serial=139676 10:30:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:30:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:30:34 Point started: ret=0 10:30:34 point_skyscan result=0 10:30:35 Check angles 10:30:35 SkyScan query 10:30:35 SkyScan query done: ret=0 az=134.79<-8986 ze=36.615<-9559 Statuses=0009 0009 10:30:35 Msec=0 True Az=134.79 Ze=36.615 Az status=0009 Ze status=0009 10:30:35 Check angles 10:30:35 SkyScan query 10:30:36 SkyScan query done: ret=0 az=117.45<-7830 ze=15.705<-10953 Statuses=0009 0009 10:30:36 Msec=750 True Az=117.45 Ze=15.705 Az status=0009 Ze status=0009 10:30:36 Check angles 10:30:36 SkyScan query 10:30:37 SkyScan query done: ret=0 az=99.69<-6646 ze=-5.715<-12381 Statuses=0009 0009 10:30:37 Msec=1500 True Az=99.69 Ze=-5.715 Az status=0009 Ze status=0009 10:30:37 Check angles 10:30:37 SkyScan query 10:30:37 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.685<-13779 Statuses=0009 0009 10:30:37 Msec=2250 True Az=82.26 Ze=-26.685 Az status=0009 Ze status=0009 10:30:38 Check angles 10:30:38 SkyScan query 10:30:38 SkyScan query done: ret=0 az=64.71<-4314 ze=-38.58<-14572 Statuses=0009 0008 10:30:38 Msec=3000 True Az=64.71 Ze=-38.58 Az status=0009 Ze status=0008 10:30:38 Check angles 10:30:38 SkyScan query 10:30:39 SkyScan query done: ret=0 az=47.205<-3147 ze=-38.52<-14568 Statuses=0009 0008 10:30:39 Msec=3750 True Az=47.205 Ze=-38.52 Az status=0009 Ze status=0008 10:30:39 Check angles 10:30:39 SkyScan query 10:30:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:30:40 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:30:40 Message to Master queued w/err=0: serial=139676 error=0 10:30:45 Received message from Master: op=Filter serial=139677 10:30:45 Color wheel filter change from 0 to 0 10:30:45 FLIGetFilterPos err=0 currentPosition=0 10:30:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:45 Filter is already there-color wheel unchanged 10:30:45 Received message from Master: op=Shutter serial=139678 10:30:45 Shutter LASER close 10:30:45 Received message from Camera: op=State serial=139680 10:30:45 GetSingleValue result=40 Value=cccccccc 10:30:45 SkyScan query 10:30:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:30:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:45 Parameters OK 10:30:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:45 Set A/D data flow result=40 10:30:45 Set A/D channel type result=40 10:30:45 Set A/D encoding result=40 10:30:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:45 Set channel filter=0.000000e+000 result=40 10:30:45 Config A/D Result=40 10:30:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:45 Get A/D filter: -9.255963e+061 result=40 10:30:45 Get A/D value=-858993460 result=40 10:30:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:45 Parameters OK 10:30:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:45 Set A/D data flow result=40 10:30:45 Set A/D channel type result=40 10:30:45 Set A/D encoding result=40 10:30:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:45 Set channel filter=0.000000e+000 result=40 10:30:45 Config A/D Result=40 10:30:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:45 Get A/D filter: -9.255963e+061 result=40 10:30:45 Get A/D value=-858993460 result=40 10:30:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:45 Aux= 10:30:45 Message to Camera, serial 139680 queued 10:31:22 Received message from Master: op=PointingHead serial=139693 10:31:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:31:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:31:23 Point started: ret=0 10:31:23 point_skyscan result=0 10:31:23 Check angles 10:31:23 SkyScan query 10:31:24 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.19<-16546 Statuses=0009 0009 10:31:24 Msec=0 True Az=63.96 Ze=-68.19 Az status=0009 Ze status=0009 10:31:24 Check angles 10:31:24 SkyScan query 10:31:25 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.175<-17945 Statuses=0009 0009 10:31:25 Msec=750 True Az=81.57 Ze=-89.175 Az status=0009 Ze status=0009 10:31:25 Check angles 10:31:25 SkyScan query 10:31:25 SkyScan query done: ret=0 az=98.91<-6594 ze=-110.1<-19340 Statuses=0009 0009 10:31:25 Msec=1500 True Az=98.91 Ze=-110.1 Az status=0009 Ze status=0009 10:31:26 Check angles 10:31:26 SkyScan query 10:31:26 SkyScan query done: ret=0 az=116.43<-7762 ze=-131.07<-20738 Statuses=0009 0009 10:31:26 Msec=2250 True Az=116.43 Ze=-131.07 Az status=0009 Ze status=0009 10:31:26 Check angles 10:31:26 SkyScan query 10:31:27 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 10:31:27 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 10:31:27 Check angles 10:31:27 SkyScan query 10:31:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 10:31:28 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 10:31:28 Message to Master queued w/err=0: serial=139693 error=0 10:31:33 Received message from Master: op=Filter serial=139694 10:31:33 Color wheel filter change from 0 to 0 10:31:33 FLIGetFilterPos err=0 currentPosition=0 10:31:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:31:33 Filter is already there-color wheel unchanged 10:31:33 Received message from Master: op=Shutter serial=139695 10:31:33 Shutter LASER close 10:31:33 Received message from Camera: op=State serial=139697 10:31:33 GetSingleValue result=40 Value=cccccccc 10:31:33 SkyScan query 10:31:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:31:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:33 Parameters OK 10:31:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:33 Set A/D data flow result=40 10:31:33 Set A/D channel type result=40 10:31:33 Set A/D encoding result=40 10:31:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:33 Set channel filter=0.000000e+000 result=40 10:31:33 Config A/D Result=40 10:31:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:33 Get A/D filter: -9.255963e+061 result=40 10:31:33 Get A/D value=-858993460 result=40 10:31:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:33 Parameters OK 10:31:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:33 Set A/D data flow result=40 10:31:33 Set A/D channel type result=40 10:31:33 Set A/D encoding result=40 10:31:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:33 Set channel filter=0.000000e+000 result=40 10:31:33 Config A/D Result=40 10:31:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:33 Get A/D filter: -9.255963e+061 result=40 10:31:33 Get A/D value=-858993460 result=40 10:31:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:31:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:31:33 Aux= 10:31:33 Message to Camera, serial 139697 queued 10:32:10 Received message from Master: op=PointingHead serial=139710 10:32:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:32:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:32:11 Point started: ret=0 10:32:11 point_skyscan result=0 10:32:11 Check angles 10:32:11 SkyScan query 10:32:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 10:32:12 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 10:32:12 Check angles 10:32:12 SkyScan query 10:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:32:13 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:32:13 Message to Master queued w/err=0: serial=139710 error=0 10:32:18 Received message from Master: op=Filter serial=139711 10:32:18 Color wheel filter change from 0 to 0 10:32:18 FLIGetFilterPos err=0 currentPosition=0 10:32:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:18 Filter is already there-color wheel unchanged 10:32:18 Received message from Master: op=Shutter serial=139712 10:32:18 Shutter LASER open 10:32:18 Received message from Camera: op=State serial=139714 10:32:18 GetSingleValue result=40 Value=cccccccc 10:32:18 SkyScan query 10:32:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:32:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:19 Parameters OK 10:32:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:19 Set A/D data flow result=40 10:32:19 Set A/D channel type result=40 10:32:19 Set A/D encoding result=40 10:32:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:19 Set channel filter=0.000000e+000 result=40 10:32:19 Config A/D Result=40 10:32:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:19 Get A/D filter: -9.255963e+061 result=40 10:32:19 Get A/D value=-858993460 result=40 10:32:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:19 Parameters OK 10:32:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:19 Set A/D data flow result=40 10:32:19 Set A/D channel type result=40 10:32:19 Set A/D encoding result=40 10:32:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:19 Set channel filter=0.000000e+000 result=40 10:32:19 Config A/D Result=40 10:32:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:19 Get A/D filter: -9.255963e+061 result=40 10:32:19 Get A/D value=-858993460 result=40 10:32:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:19 Aux= 10:32:19 Message to Camera, serial 139714 queued 10:32:27 Received message from Master: op=Shutter serial=139724 10:32:27 Shutter LASER close 10:32:28 Received message from Master: op=PointingHead serial=139728 10:32:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:32:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:32:28 Point started: ret=0 10:32:28 point_skyscan result=0 10:32:29 Check angles 10:32:29 SkyScan query 10:32:29 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.98<-21532 Statuses=0009 0009 10:32:29 Msec=0 True Az=136.215 Ze=-142.98 Az status=0009 Ze status=0009 10:32:30 Check angles 10:32:30 SkyScan query 10:32:30 SkyScan query done: ret=0 az=153.75<-10250 ze=-122.01<-20134 Statuses=0009 0009 10:32:30 Msec=750 True Az=153.75 Ze=-122.01 Az status=0009 Ze status=0009 10:32:30 Check angles 10:32:30 SkyScan query 10:32:31 SkyScan query done: ret=0 az=171.255<-11417 ze=-101.04<-18736 Statuses=0009 0009 10:32:31 Msec=1500 True Az=171.255 Ze=-101.04 Az status=0009 Ze status=0009 10:32:31 Check angles 10:32:31 SkyScan query 10:32:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.13<-17342 Statuses=0008 0009 10:32:32 Msec=2250 True Az=176.01 Ze=-80.13 Az status=0008 Ze status=0009 10:32:32 Check angles 10:32:32 SkyScan query 10:32:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.145<-15943 Statuses=0008 0009 10:32:32 Msec=3000 True Az=176.01 Ze=-59.145 Az status=0008 Ze status=0009 10:32:33 Check angles 10:32:33 SkyScan query 10:32:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:32:33 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:32:33 Message to Master queued w/err=0: serial=139728 error=0 10:32:38 Received message from Master: op=Filter serial=139729 10:32:38 Color wheel filter change from 0 to 0 10:32:38 FLIGetFilterPos err=0 currentPosition=0 10:32:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:38 Filter is already there-color wheel unchanged 10:32:38 Received message from Master: op=Shutter serial=139730 10:32:38 Shutter LASER close 10:32:39 Received message from Camera: op=State serial=139732 10:32:39 GetSingleValue result=40 Value=cccccccc 10:32:39 SkyScan query 10:32:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:32:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:39 Parameters OK 10:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:39 Set A/D data flow result=40 10:32:39 Set A/D channel type result=40 10:32:39 Set A/D encoding result=40 10:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:39 Set channel filter=0.000000e+000 result=40 10:32:39 Config A/D Result=40 10:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:39 Get A/D filter: -9.255963e+061 result=40 10:32:39 Get A/D value=-858993460 result=40 10:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:39 Parameters OK 10:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:39 Set A/D data flow result=40 10:32:39 Set A/D channel type result=40 10:32:39 Set A/D encoding result=40 10:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:39 Set channel filter=0.000000e+000 result=40 10:32:39 Config A/D Result=40 10:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:39 Get A/D filter: -9.255963e+061 result=40 10:32:39 Get A/D value=-858993460 result=40 10:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:39 Aux= 10:32:39 Message to Camera, serial 139732 queued 10:33:15 Received message from Master: op=PointingHead serial=139744 10:33:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:33:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:33:15 Point started: ret=0 10:33:15 point_skyscan result=0 10:33:16 Check angles 10:33:16 SkyScan query 10:33:17 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.585<-13439 Statuses=0009 0009 10:33:17 Msec=0 True Az=152.925 Ze=-21.585 Az status=0009 Ze status=0009 10:33:17 Check angles 10:33:17 SkyScan query 10:33:17 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.675<-12045 Statuses=0009 0009 10:33:17 Msec=750 True Az=135.39 Ze=-0.675 Az status=0009 Ze status=0009 10:33:18 Check angles 10:33:18 SkyScan query 10:33:18 SkyScan query done: ret=0 az=117.57<-7838 ze=20.685<-10621 Statuses=0009 0009 10:33:18 Msec=1500 True Az=117.57 Ze=20.685 Az status=0009 Ze status=0009 10:33:18 Check angles 10:33:18 SkyScan query 10:33:19 SkyScan query done: ret=0 az=100.125<-6675 ze=41.64<-9224 Statuses=0009 0009 10:33:19 Msec=2250 True Az=100.125 Ze=41.64 Az status=0009 Ze status=0009 10:33:19 Check angles 10:33:19 SkyScan query 10:33:20 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 10:33:20 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 10:33:20 Check angles 10:33:20 SkyScan query 10:33:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:33:20 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:33:20 Message to Master queued w/err=0: serial=139744 error=0 10:33:25 Received message from Master: op=Filter serial=139745 10:33:25 Color wheel filter change from 0 to 0 10:33:25 FLIGetFilterPos err=0 currentPosition=0 10:33:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:25 Filter is already there-color wheel unchanged 10:33:26 Received message from Master: op=Shutter serial=139746 10:33:26 Shutter LASER close 10:33:26 Received message from Camera: op=State serial=139748 10:33:26 GetSingleValue result=40 Value=cccccccc 10:33:26 SkyScan query 10:33:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:33:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:26 Parameters OK 10:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:26 Set A/D data flow result=40 10:33:26 Set A/D channel type result=40 10:33:26 Set A/D encoding result=40 10:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:26 Set channel filter=0.000000e+000 result=40 10:33:26 Config A/D Result=40 10:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:26 Get A/D filter: -9.255963e+061 result=40 10:33:26 Get A/D value=-858993460 result=40 10:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:26 Parameters OK 10:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:26 Set A/D data flow result=40 10:33:26 Set A/D channel type result=40 10:33:26 Set A/D encoding result=40 10:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:26 Set channel filter=0.000000e+000 result=40 10:33:26 Config A/D Result=40 10:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:26 Get A/D filter: -9.255963e+061 result=40 10:33:26 Get A/D value=-858993460 result=40 10:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:26 Aux= 10:33:26 Message to Camera, serial 139748 queued 10:34:03 Received message from Master: op=PointingHead serial=139761 10:34:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:34:03 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:34:03 Point started: ret=0 10:34:03 point_skyscan result=0 10:34:04 Check angles 10:34:04 SkyScan query 10:34:05 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 10:34:05 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 10:34:05 Check angles 10:34:05 SkyScan query 10:34:06 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 10:34:06 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 10:34:06 Check angles 10:34:06 SkyScan query 10:34:06 SkyScan query done: ret=0 az=143.985<-9599 ze=38.505<-9433 Statuses=0009 0008 10:34:06 Msec=1500 True Az=143.985 Ze=38.505 Az status=0009 Ze status=0008 10:34:06 Check angles 10:34:06 SkyScan query 10:34:07 SkyScan query done: ret=0 az=161.46<-10764 ze=38.505<-9433 Statuses=0009 0008 10:34:07 Msec=2250 True Az=161.46 Ze=38.505 Az status=0009 Ze status=0008 10:34:07 Check angles 10:34:07 SkyScan query 10:34:08 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:34:08 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:34:08 Check angles 10:34:08 SkyScan query 10:34:09 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:34:09 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:34:09 Message to Master queued w/err=0: serial=139761 error=0 10:34:14 Received message from Master: op=Filter serial=139762 10:34:14 Color wheel filter change from 0 to 0 10:34:14 FLIGetFilterPos err=0 currentPosition=0 10:34:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:14 Filter is already there-color wheel unchanged 10:34:14 Received message from Master: op=Shutter serial=139763 10:34:14 Shutter LASER close 10:34:14 Received message from Camera: op=State serial=139765 10:34:14 GetSingleValue result=40 Value=cccccccc 10:34:14 SkyScan query 10:34:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:34:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:14 Parameters OK 10:34:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:14 Set A/D data flow result=40 10:34:14 Set A/D channel type result=40 10:34:14 Set A/D encoding result=40 10:34:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:14 Set channel filter=0.000000e+000 result=40 10:34:14 Config A/D Result=40 10:34:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:14 Get A/D filter: -9.255963e+061 result=40 10:34:14 Get A/D value=-858993460 result=40 10:34:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:14 Parameters OK 10:34:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:14 Set A/D data flow result=40 10:34:14 Set A/D channel type result=40 10:34:14 Set A/D encoding result=40 10:34:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:14 Set channel filter=0.000000e+000 result=40 10:34:14 Config A/D Result=40 10:34:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:14 Get A/D filter: -9.255963e+061 result=40 10:34:14 Get A/D value=-858993460 result=40 10:34:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:14 Aux= 10:34:14 Message to Camera, serial 139765 queued 10:34:51 Received message from Master: op=PointingHead serial=139778 10:34:51 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:34:51 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:34:51 Point started: ret=0 10:34:51 point_skyscan result=0 10:34:52 Check angles 10:34:52 SkyScan query 10:34:53 SkyScan query done: ret=0 az=152.76<-10184 ze=8.415<-11439 Statuses=0009 0009 10:34:53 Msec=0 True Az=152.76 Ze=8.415 Az status=0009 Ze status=0009 10:34:53 Check angles 10:34:53 SkyScan query 10:34:54 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.495<-12833 Statuses=0009 0009 10:34:54 Msec=750 True Az=135.315 Ze=-12.495 Az status=0009 Ze status=0009 10:34:54 Check angles 10:34:54 SkyScan query 10:34:54 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.465<-14231 Statuses=0009 0009 10:34:54 Msec=1500 True Az=117.795 Ze=-33.465 Az status=0009 Ze status=0009 10:34:54 Check angles 10:34:54 SkyScan query 10:34:55 SkyScan query done: ret=0 az=100.065<-6671 ze=-51.57<-15438 Statuses=0009 0009 10:34:55 Msec=2250 True Az=100.065 Ze=-51.57 Az status=0009 Ze status=0009 10:34:55 Check angles 10:34:55 SkyScan query 10:34:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 10:34:56 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 10:34:56 Check angles 10:34:56 SkyScan query 10:34:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:34:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:34:57 Message to Master queued w/err=0: serial=139778 error=0 10:35:02 Received message from Master: op=Filter serial=139779 10:35:02 Color wheel filter change from 0 to 0 10:35:02 FLIGetFilterPos err=0 currentPosition=0 10:35:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:02 Filter is already there-color wheel unchanged 10:35:02 Received message from Master: op=Shutter serial=139780 10:35:02 Shutter LASER close 10:35:02 Received message from Camera: op=State serial=139782 10:35:02 GetSingleValue result=40 Value=cccccccc 10:35:02 SkyScan query 10:35:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:35:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:02 Parameters OK 10:35:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:02 Set A/D data flow result=40 10:35:02 Set A/D channel type result=40 10:35:02 Set A/D encoding result=40 10:35:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:02 Set channel filter=0.000000e+000 result=40 10:35:02 Config A/D Result=40 10:35:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:02 Get A/D filter: -9.255963e+061 result=40 10:35:02 Get A/D value=-858993460 result=40 10:35:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:02 Parameters OK 10:35:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:02 Set A/D data flow result=40 10:35:02 Set A/D channel type result=40 10:35:02 Set A/D encoding result=40 10:35:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:02 Set channel filter=0.000000e+000 result=40 10:35:02 Config A/D Result=40 10:35:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:02 Get A/D filter: -9.255963e+061 result=40 10:35:02 Get A/D value=-858993460 result=40 10:35:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:02 Aux= 10:35:02 Message to Camera, serial 139782 queued 10:35:39 Received message from Master: op=PointingHead serial=139795 10:35:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:35:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:35:40 Point started: ret=0 10:35:40 point_skyscan result=0 10:35:40 Check angles 10:35:40 SkyScan query 10:35:41 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.195<-17413 Statuses=0009 0009 10:35:41 Msec=0 True Az=108.915 Ze=-81.195 Az status=0009 Ze status=0009 10:35:41 Check angles 10:35:41 SkyScan query 10:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.165<-18811 Statuses=0008 0009 10:35:42 Msec=750 True Az=112.995 Ze=-102.165 Az status=0008 Ze status=0009 10:35:42 Check angles 10:35:42 SkyScan query 10:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.105<-20207 Statuses=0008 0009 10:35:42 Msec=1500 True Az=112.995 Ze=-123.105 Az status=0008 Ze status=0009 10:35:43 Check angles 10:35:43 SkyScan query 10:35:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.075<-21605 Statuses=0008 0009 10:35:43 Msec=2250 True Az=112.995 Ze=-144.075 Az status=0008 Ze status=0009 10:35:43 Check angles 10:35:43 SkyScan query 10:35:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.03<-23002 Statuses=0008 0009 10:35:44 Msec=3000 True Az=112.995 Ze=-165.03 Az status=0008 Ze status=0009 10:35:44 Check angles 10:35:44 SkyScan query 10:35:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 10:35:45 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 10:35:45 Message to Master queued w/err=0: serial=139795 error=0 10:35:50 Received message from Master: op=Filter serial=139796 10:35:50 Color wheel filter change from 0 to 0 10:35:50 FLIGetFilterPos err=0 currentPosition=0 10:35:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:50 Filter is already there-color wheel unchanged 10:35:50 Received message from Master: op=Shutter serial=139797 10:35:50 Shutter LASER open 10:35:50 Received message from Camera: op=State serial=139799 10:35:50 GetSingleValue result=40 Value=cccccccc 10:35:50 SkyScan query 10:35:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:35:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:51 Parameters OK 10:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:51 Set A/D data flow result=40 10:35:51 Set A/D channel type result=40 10:35:51 Set A/D encoding result=40 10:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:51 Set channel filter=0.000000e+000 result=40 10:35:51 Config A/D Result=40 10:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:51 Get A/D filter: -9.255963e+061 result=40 10:35:51 Get A/D value=-858993460 result=40 10:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:51 Parameters OK 10:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:51 Set A/D data flow result=40 10:35:51 Set A/D channel type result=40 10:35:51 Set A/D encoding result=40 10:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:51 Set channel filter=0.000000e+000 result=40 10:35:51 Config A/D Result=40 10:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:51 Get A/D filter: -9.255963e+061 result=40 10:35:51 Get A/D value=-858993460 result=40 10:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:51 Aux= 10:35:51 Message to Camera, serial 139799 queued [UTC 2018-12-14 10:35:52] 10:35:59 Received message from Master: op=Shutter serial=139809 10:35:59 Shutter LASER close 10:35:59 Received message from Master: op=PointingHead serial=139813 10:35:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:35:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:36:00 Point started: ret=0 10:36:00 point_skyscan result=0 10:36:01 Check angles 10:36:01 SkyScan query 10:36:01 SkyScan query done: ret=0 az=89.835<-5989 ze=157.305<-1513 Statuses=0009 0009 10:36:01 Msec=0 True Az=89.835 Ze=157.305 Az status=0009 Ze status=0009 10:36:01 Check angles 10:36:01 SkyScan query 10:36:02 SkyScan query done: ret=0 az=72.495<-4833 ze=136.335<-2911 Statuses=0009 0009 10:36:02 Msec=750 True Az=72.495 Ze=136.335 Az status=0009 Ze status=0009 10:36:02 Check angles 10:36:02 SkyScan query 10:36:03 SkyScan query done: ret=0 az=55.065<-3671 ze=115.41<-4306 Statuses=0009 0009 10:36:03 Msec=1500 True Az=55.065 Ze=115.41 Az status=0009 Ze status=0009 10:36:03 Check angles 10:36:03 SkyScan query 10:36:03 SkyScan query done: ret=0 az=40.965<-2731 ze=94.425<-5705 Statuses=0009 0009 10:36:03 Msec=2250 True Az=40.965 Ze=94.425 Az status=0009 Ze status=0009 10:36:04 Check angles 10:36:04 SkyScan query 10:36:04 SkyScan query done: ret=0 az=40.995<-2733 ze=73.455<-7103 Statuses=0008 0009 10:36:04 Msec=3000 True Az=40.995 Ze=73.455 Az status=0008 Ze status=0009 10:36:04 Check angles 10:36:04 SkyScan query 10:36:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.89<-8474 Statuses=0008 0009 10:36:05 Msec=3750 True Az=40.995 Ze=52.89 Az status=0008 Ze status=0009 10:36:05 Check angles 10:36:05 SkyScan query 10:36:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:36:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:36:06 Message to Master queued w/err=0: serial=139813 error=0 10:36:11 Received message from Master: op=Filter serial=139814 10:36:11 Color wheel filter change from 0 to 0 10:36:11 FLIGetFilterPos err=0 currentPosition=0 10:36:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:11 Filter is already there-color wheel unchanged 10:36:11 Received message from Master: op=Shutter serial=139815 10:36:11 Shutter LASER close 10:36:11 Received message from Camera: op=State serial=139817 10:36:11 GetSingleValue result=40 Value=cccccccc 10:36:11 SkyScan query 10:36:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:36:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:12 Parameters OK 10:36:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:12 Set A/D data flow result=40 10:36:12 Set A/D channel type result=40 10:36:12 Set A/D encoding result=40 10:36:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:12 Set channel filter=0.000000e+000 result=40 10:36:12 Config A/D Result=40 10:36:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:12 Get A/D filter: -9.255963e+061 result=40 10:36:12 Get A/D value=-858993460 result=40 10:36:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:12 Parameters OK 10:36:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:12 Set A/D data flow result=40 10:36:12 Set A/D channel type result=40 10:36:12 Set A/D encoding result=40 10:36:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:12 Set channel filter=0.000000e+000 result=40 10:36:12 Config A/D Result=40 10:36:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:12 Get A/D filter: -9.255963e+061 result=40 10:36:12 Get A/D value=-858993460 result=40 10:36:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:12 Aux= 10:36:12 Message to Camera, serial 139817 queued 10:36:48 Received message from Master: op=PointingHead serial=139830 10:36:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:36:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:36:49 Point started: ret=0 10:36:49 point_skyscan result=0 10:36:49 Check angles 10:36:49 SkyScan query 10:36:50 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 10:36:50 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 10:36:50 Check angles 10:36:50 SkyScan query 10:36:51 SkyScan query done: ret=0 az=81.705<-5447 ze=66.51<-7566 Statuses=0009 0008 10:36:51 Msec=750 True Az=81.705 Ze=66.51 Az status=0009 Ze status=0008 10:36:51 Check angles 10:36:51 SkyScan query 10:36:52 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 10:36:52 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 10:36:52 Check angles 10:36:52 SkyScan query 10:36:52 SkyScan query done: ret=0 az=116.67<-7778 ze=66.495<-7567 Statuses=0009 0008 10:36:52 Msec=2250 True Az=116.67 Ze=66.495 Az status=0009 Ze status=0008 10:36:52 Check angles 10:36:52 SkyScan query 10:36:53 SkyScan query done: ret=0 az=134.175<-8945 ze=66.495<-7567 Statuses=0009 0008 10:36:53 Msec=3000 True Az=134.175 Ze=66.495 Az status=0009 Ze status=0008 10:36:53 Check angles 10:36:53 SkyScan query 10:36:54 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 10:36:54 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 10:36:54 Check angles 10:36:54 SkyScan query 10:36:55 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:36:55 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:36:55 Message to Master queued w/err=0: serial=139830 error=0 10:37:00 Received message from Master: op=Filter serial=139831 10:37:00 Color wheel filter change from 0 to 0 10:37:00 FLIGetFilterPos err=0 currentPosition=0 10:37:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:00 Filter is already there-color wheel unchanged 10:37:00 Received message from Master: op=Shutter serial=139832 10:37:00 Shutter LASER close 10:37:00 Received message from Camera: op=State serial=139834 10:37:00 GetSingleValue result=40 Value=cccccccc 10:37:00 SkyScan query 10:37:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:37:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:00 Parameters OK 10:37:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:00 Set A/D data flow result=40 10:37:00 Set A/D channel type result=40 10:37:00 Set A/D encoding result=40 10:37:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:00 Set channel filter=0.000000e+000 result=40 10:37:00 Config A/D Result=40 10:37:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:00 Get A/D filter: -9.255963e+061 result=40 10:37:00 Get A/D value=-858993460 result=40 10:37:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:00 Parameters OK 10:37:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:00 Set A/D data flow result=40 10:37:00 Set A/D channel type result=40 10:37:00 Set A/D encoding result=40 10:37:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:00 Set channel filter=0.000000e+000 result=40 10:37:00 Config A/D Result=40 10:37:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:00 Get A/D filter: -9.255963e+061 result=40 10:37:00 Get A/D value=-858993460 result=40 10:37:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:00 Aux= 10:37:00 Message to Camera, serial 139834 queued 10:37:37 Received message from Master: op=PointingHead serial=139847 10:37:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:37:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:37:38 Point started: ret=0 10:37:38 point_skyscan result=0 10:37:38 Check angles 10:37:38 SkyScan query 10:37:39 SkyScan query done: ret=0 az=134.775<-8985 ze=36.585<-9561 Statuses=0009 0009 10:37:39 Msec=0 True Az=134.775 Ze=36.585 Az status=0009 Ze status=0009 10:37:39 Check angles 10:37:39 SkyScan query 10:37:40 SkyScan query done: ret=0 az=117.285<-7819 ze=15.69<-10954 Statuses=0009 0009 10:37:40 Msec=750 True Az=117.285 Ze=15.69 Az status=0009 Ze status=0009 10:37:40 Check angles 10:37:40 SkyScan query 10:37:40 SkyScan query done: ret=0 az=100.035<-6669 ze=-5.31<-12354 Statuses=0009 0009 10:37:40 Msec=1500 True Az=100.035 Ze=-5.31 Az status=0009 Ze status=0009 10:37:41 Check angles 10:37:41 SkyScan query 10:37:41 SkyScan query done: ret=0 az=82.425<-5495 ze=-26.265<-13751 Statuses=0009 0009 10:37:41 Msec=2250 True Az=82.425 Ze=-26.265 Az status=0009 Ze status=0009 10:37:41 Check angles 10:37:41 SkyScan query 10:37:42 SkyScan query done: ret=0 az=64.65<-4310 ze=-38.58<-14572 Statuses=0009 0008 10:37:42 Msec=3000 True Az=64.65 Ze=-38.58 Az status=0009 Ze status=0008 10:37:42 Check angles 10:37:42 SkyScan query 10:37:43 SkyScan query done: ret=0 az=47.235<-3149 ze=-38.52<-14568 Statuses=0009 0008 10:37:43 Msec=3750 True Az=47.235 Ze=-38.52 Az status=0009 Ze status=0008 10:37:43 Check angles 10:37:43 SkyScan query 10:37:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:37:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:37:43 Message to Master queued w/err=0: serial=139847 error=0 10:37:48 Received message from Master: op=Filter serial=139848 10:37:48 Color wheel filter change from 0 to 0 10:37:48 FLIGetFilterPos err=0 currentPosition=0 10:37:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:48 Filter is already there-color wheel unchanged 10:37:49 Received message from Master: op=Shutter serial=139849 10:37:49 Shutter LASER close 10:37:49 Received message from Camera: op=State serial=139851 10:37:49 GetSingleValue result=40 Value=cccccccc 10:37:49 SkyScan query 10:37:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:37:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:49 Parameters OK 10:37:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:49 Set A/D data flow result=40 10:37:49 Set A/D channel type result=40 10:37:49 Set A/D encoding result=40 10:37:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:49 Set channel filter=0.000000e+000 result=40 10:37:49 Config A/D Result=40 10:37:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:49 Get A/D filter: -9.255963e+061 result=40 10:37:49 Get A/D value=-858993460 result=40 10:37:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:49 Parameters OK 10:37:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:49 Set A/D data flow result=40 10:37:49 Set A/D channel type result=40 10:37:49 Set A/D encoding result=40 10:37:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:49 Set channel filter=0.000000e+000 result=40 10:37:49 Config A/D Result=40 10:37:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:49 Get A/D filter: -9.255963e+061 result=40 10:37:49 Get A/D value=-858993460 result=40 10:37:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:49 Aux= 10:37:49 Message to Camera, serial 139851 queued 10:38:25 Received message from Master: op=PointingHead serial=139863 10:38:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:38:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:38:25 Point started: ret=0 10:38:25 point_skyscan result=0 10:38:26 Check angles 10:38:26 SkyScan query 10:38:27 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.205<-16547 Statuses=0009 0009 10:38:27 Msec=0 True Az=63.84 Ze=-68.205 Az status=0009 Ze status=0009 10:38:27 Check angles 10:38:27 SkyScan query 10:38:27 SkyScan query done: ret=0 az=81.705<-5447 ze=-89.625<-17975 Statuses=0009 0009 10:38:27 Msec=750 True Az=81.705 Ze=-89.625 Az status=0009 Ze status=0009 10:38:28 Check angles 10:38:28 SkyScan query 10:38:28 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.595<-19373 Statuses=0009 0009 10:38:28 Msec=1500 True Az=99.18 Ze=-110.595 Az status=0009 Ze status=0009 10:38:28 Check angles 10:38:28 SkyScan query 10:38:29 SkyScan query done: ret=0 az=116.655<-7777 ze=-131.49<-20766 Statuses=0009 0009 10:38:29 Msec=2250 True Az=116.655 Ze=-131.49 Az status=0009 Ze status=0009 10:38:29 Check angles 10:38:29 SkyScan query 10:38:30 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 10:38:30 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 10:38:30 Check angles 10:38:30 SkyScan query 10:38:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 10:38:31 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 10:38:31 Message to Master queued w/err=0: serial=139863 error=0 10:38:36 Received message from Master: op=Filter serial=139864 10:38:36 Color wheel filter change from 0 to 0 10:38:36 FLIGetFilterPos err=0 currentPosition=0 10:38:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:38:36 Filter is already there-color wheel unchanged 10:38:36 Received message from Master: op=Shutter serial=139865 10:38:36 Shutter LASER close 10:38:36 Received message from Camera: op=State serial=139867 10:38:36 GetSingleValue result=40 Value=cccccccc 10:38:36 SkyScan query 10:38:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:38:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:36 Parameters OK 10:38:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:36 Set A/D data flow result=40 10:38:36 Set A/D channel type result=40 10:38:36 Set A/D encoding result=40 10:38:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:36 Set channel filter=0.000000e+000 result=40 10:38:36 Config A/D Result=40 10:38:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:36 Get A/D filter: -9.255963e+061 result=40 10:38:36 Get A/D value=-858993460 result=40 10:38:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:36 Parameters OK 10:38:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:36 Set A/D data flow result=40 10:38:36 Set A/D channel type result=40 10:38:36 Set A/D encoding result=40 10:38:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:36 Set channel filter=0.000000e+000 result=40 10:38:36 Config A/D Result=40 10:38:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:36 Get A/D filter: -9.255963e+061 result=40 10:38:36 Get A/D value=-858993460 result=40 10:38:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:38:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:38:36 Aux= 10:38:36 Message to Camera, serial 139867 queued 10:39:13 Received message from Master: op=PointingHead serial=139880 10:39:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:39:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:39:13 Point started: ret=0 10:39:13 point_skyscan result=0 10:39:14 Check angles 10:39:14 SkyScan query 10:39:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.315<-23421 Statuses=0009 0009 10:39:15 Msec=0 True Az=112.995 Ze=-171.315 Az status=0009 Ze status=0009 10:39:15 Check angles 10:39:15 SkyScan query 10:39:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:39:16 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:39:16 Message to Master queued w/err=0: serial=139880 error=0 10:39:21 Received message from Master: op=Filter serial=139881 10:39:21 Color wheel filter change from 0 to 0 10:39:21 FLIGetFilterPos err=0 currentPosition=0 10:39:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:21 Filter is already there-color wheel unchanged 10:39:21 Received message from Master: op=Shutter serial=139882 10:39:21 Shutter LASER open 10:39:21 Received message from Camera: op=State serial=139884 10:39:21 GetSingleValue result=40 Value=cccccccc 10:39:21 SkyScan query 10:39:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:39:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:21 Parameters OK 10:39:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:21 Set A/D data flow result=40 10:39:21 Set A/D channel type result=40 10:39:21 Set A/D encoding result=40 10:39:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:21 Set channel filter=0.000000e+000 result=40 10:39:21 Config A/D Result=40 10:39:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:21 Get A/D filter: -9.255963e+061 result=40 10:39:21 Get A/D value=-858993460 result=40 10:39:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:21 Parameters OK 10:39:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:21 Set A/D data flow result=40 10:39:21 Set A/D channel type result=40 10:39:21 Set A/D encoding result=40 10:39:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:21 Set channel filter=0.000000e+000 result=40 10:39:21 Config A/D Result=40 10:39:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:21 Get A/D filter: -9.255963e+061 result=40 10:39:21 Get A/D value=-858993460 result=40 10:39:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:21 Aux= 10:39:21 Message to Camera, serial 139884 queued 10:39:30 Received message from Master: op=Shutter serial=139894 10:39:30 Shutter LASER close 10:39:30 Received message from Master: op=PointingHead serial=139898 10:39:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:39:30 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:39:31 Point started: ret=0 10:39:31 point_skyscan result=0 10:39:32 Check angles 10:39:32 SkyScan query 10:39:32 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.83<-21522 Statuses=0009 0009 10:39:32 Msec=0 True Az=136.395 Ze=-142.83 Az status=0009 Ze status=0009 10:39:32 Check angles 10:39:32 SkyScan query 10:39:33 SkyScan query done: ret=0 az=154.215<-10281 ze=-121.47<-20098 Statuses=0009 0009 10:39:33 Msec=750 True Az=154.215 Ze=-121.47 Az status=0009 Ze status=0009 10:39:33 Check angles 10:39:33 SkyScan query 10:39:34 SkyScan query done: ret=0 az=171.645<-11443 ze=-100.32<-18688 Statuses=0009 0009 10:39:34 Msec=1500 True Az=171.645 Ze=-100.32 Az status=0009 Ze status=0009 10:39:34 Check angles 10:39:34 SkyScan query 10:39:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.035<-17269 Statuses=0008 0009 10:39:34 Msec=2250 True Az=176.01 Ze=-79.035 Az status=0008 Ze status=0009 10:39:35 Check angles 10:39:35 SkyScan query 10:39:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.095<-15873 Statuses=0008 0009 10:39:35 Msec=3000 True Az=176.01 Ze=-58.095 Az status=0008 Ze status=0009 10:39:35 Check angles 10:39:35 SkyScan query 10:39:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 10:39:36 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 10:39:36 Message to Master queued w/err=0: serial=139898 error=0 10:39:41 Received message from Master: op=Filter serial=139899 10:39:41 Color wheel filter change from 0 to 0 10:39:41 FLIGetFilterPos err=0 currentPosition=0 10:39:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:41 Filter is already there-color wheel unchanged 10:39:41 Received message from Master: op=Shutter serial=139900 10:39:41 Shutter LASER close 10:39:41 Received message from Camera: op=State serial=139902 10:39:41 GetSingleValue result=40 Value=cccccccc 10:39:41 SkyScan query 10:39:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:39:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:42 Parameters OK 10:39:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:42 Set A/D data flow result=40 10:39:42 Set A/D channel type result=40 10:39:42 Set A/D encoding result=40 10:39:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:42 Set channel filter=0.000000e+000 result=40 10:39:42 Config A/D Result=40 10:39:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:42 Get A/D filter: -9.255963e+061 result=40 10:39:42 Get A/D value=-858993460 result=40 10:39:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:42 Parameters OK 10:39:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:42 Set A/D data flow result=40 10:39:42 Set A/D channel type result=40 10:39:42 Set A/D encoding result=40 10:39:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:42 Set channel filter=0.000000e+000 result=40 10:39:42 Config A/D Result=40 10:39:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:42 Get A/D filter: -9.255963e+061 result=40 10:39:42 Get A/D value=-858993460 result=40 10:39:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:42 Aux= 10:39:42 Message to Camera, serial 139902 queued 10:40:19 Received message from Master: op=PointingHead serial=139915 10:40:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:40:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:40:19 Point started: ret=0 10:40:19 point_skyscan result=0 10:40:20 Check angles 10:40:20 SkyScan query 10:40:20 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.675<-13445 Statuses=0009 0009 10:40:20 Msec=0 True Az=152.985 Ze=-21.675 Az status=0009 Ze status=0009 10:40:21 Check angles 10:40:21 SkyScan query 10:40:21 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.675<-12045 Statuses=0009 0009 10:40:21 Msec=750 True Az=135.405 Ze=-0.675 Az status=0009 Ze status=0009 10:40:21 Check angles 10:40:21 SkyScan query 10:40:22 SkyScan query done: ret=0 az=117.96<-7864 ze=20.25<-10650 Statuses=0009 0009 10:40:22 Msec=1500 True Az=117.96 Ze=20.25 Az status=0009 Ze status=0009 10:40:22 Check angles 10:40:22 SkyScan query 10:40:23 SkyScan query done: ret=0 az=100.44<-6696 ze=41.235<-9251 Statuses=0009 0009 10:40:23 Msec=2250 True Az=100.44 Ze=41.235 Az status=0009 Ze status=0009 10:40:23 Check angles 10:40:23 SkyScan query 10:40:23 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 10:40:23 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 10:40:24 Check angles 10:40:24 SkyScan query 10:40:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:40:24 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:40:24 Message to Master queued w/err=0: serial=139915 error=0 10:40:29 Received message from Master: op=Filter serial=139916 10:40:29 Color wheel filter change from 0 to 0 10:40:29 FLIGetFilterPos err=0 currentPosition=0 10:40:29 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:29 Filter is already there-color wheel unchanged 10:40:29 Received message from Master: op=Shutter serial=139917 10:40:29 Shutter LASER close 10:40:29 Received message from Camera: op=State serial=139919 10:40:29 GetSingleValue result=40 Value=cccccccc 10:40:29 SkyScan query 10:40:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:40:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:30 Parameters OK 10:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:30 Set A/D data flow result=40 10:40:30 Set A/D channel type result=40 10:40:30 Set A/D encoding result=40 10:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:30 Set channel filter=0.000000e+000 result=40 10:40:30 Config A/D Result=40 10:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:30 Get A/D filter: -9.255963e+061 result=40 10:40:30 Get A/D value=-858993460 result=40 10:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:30 Parameters OK 10:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:30 Set A/D data flow result=40 10:40:30 Set A/D channel type result=40 10:40:30 Set A/D encoding result=40 10:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:30 Set channel filter=0.000000e+000 result=40 10:40:30 Config A/D Result=40 10:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:30 Get A/D filter: -9.255963e+061 result=40 10:40:30 Get A/D value=-858993460 result=40 10:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:30 Aux= 10:40:30 Message to Camera, serial 139919 queued 10:41:07 Received message from Master: op=PointingHead serial=139932 10:41:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:41:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:41:07 Point started: ret=0 10:41:07 point_skyscan result=0 10:41:08 Check angles 10:41:08 SkyScan query 10:41:08 SkyScan query done: ret=0 az=108.72<-7248 ze=38.49<-9434 Statuses=0009 0008 10:41:08 Msec=0 True Az=108.72 Ze=38.49 Az status=0009 Ze status=0008 10:41:09 Check angles 10:41:09 SkyScan query 10:41:09 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 10:41:09 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 10:41:09 Check angles 10:41:09 SkyScan query 10:41:10 SkyScan query done: ret=0 az=144.105<-9607 ze=38.505<-9433 Statuses=0009 0008 10:41:10 Msec=1500 True Az=144.105 Ze=38.505 Az status=0009 Ze status=0008 10:41:10 Check angles 10:41:10 SkyScan query 10:41:11 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 10:41:11 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 10:41:11 Check angles 10:41:11 SkyScan query 10:41:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:41:11 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:41:12 Check angles 10:41:12 SkyScan query 10:41:12 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:41:12 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:41:12 Message to Master queued w/err=0: serial=139932 error=0 10:41:17 Received message from Master: op=Filter serial=139933 10:41:17 Color wheel filter change from 0 to 0 10:41:17 FLIGetFilterPos err=0 currentPosition=0 10:41:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:17 Filter is already there-color wheel unchanged 10:41:17 Received message from Master: op=Shutter serial=139934 10:41:17 Shutter LASER close 10:41:17 Received message from Camera: op=State serial=139936 10:41:17 GetSingleValue result=40 Value=cccccccc 10:41:17 SkyScan query 10:41:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:41:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:18 Parameters OK 10:41:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:18 Set A/D data flow result=40 10:41:18 Set A/D channel type result=40 10:41:18 Set A/D encoding result=40 10:41:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:18 Set channel filter=0.000000e+000 result=40 10:41:18 Config A/D Result=40 10:41:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:18 Get A/D filter: -9.255963e+061 result=40 10:41:18 Get A/D value=-858993460 result=40 10:41:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:18 Parameters OK 10:41:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:18 Set A/D data flow result=40 10:41:18 Set A/D channel type result=40 10:41:18 Set A/D encoding result=40 10:41:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:18 Set channel filter=0.000000e+000 result=40 10:41:18 Config A/D Result=40 10:41:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:18 Get A/D filter: -9.255963e+061 result=40 10:41:18 Get A/D value=-858993460 result=40 10:41:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:18 Aux= 10:41:18 Message to Camera, serial 139936 queued 10:41:55 Received message from Master: op=PointingHead serial=139949 10:41:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:41:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:41:55 Point started: ret=0 10:41:55 point_skyscan result=0 10:41:56 Check angles 10:41:56 SkyScan query 10:41:56 SkyScan query done: ret=0 az=152.865<-10191 ze=8.415<-11439 Statuses=0009 0009 10:41:56 Msec=0 True Az=152.865 Ze=8.415 Az status=0009 Ze status=0009 10:41:57 Check angles 10:41:57 SkyScan query 10:41:57 SkyScan query done: ret=0 az=134.88<-8992 ze=-12.93<-12862 Statuses=0009 0009 10:41:57 Msec=750 True Az=134.88 Ze=-12.93 Az status=0009 Ze status=0009 10:41:57 Check angles 10:41:57 SkyScan query 10:41:58 SkyScan query done: ret=0 az=117.465<-7831 ze=-33.945<-14263 Statuses=0009 0009 10:41:58 Msec=1500 True Az=117.465 Ze=-33.945 Az status=0009 Ze status=0009 10:41:58 Check angles 10:41:58 SkyScan query 10:41:59 SkyScan query done: ret=0 az=100.08<-6672 ze=-51.57<-15438 Statuses=0009 0009 10:41:59 Msec=2250 True Az=100.08 Ze=-51.57 Az status=0009 Ze status=0009 10:41:59 Check angles 10:41:59 SkyScan query 10:42:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 10:42:00 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 10:42:00 Check angles 10:42:00 SkyScan query 10:42:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:42:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:42:00 Message to Master queued w/err=0: serial=139949 error=0 10:42:05 Received message from Master: op=Filter serial=139950 10:42:05 Color wheel filter change from 0 to 0 10:42:05 FLIGetFilterPos err=0 currentPosition=0 10:42:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:05 Filter is already there-color wheel unchanged 10:42:05 Received message from Master: op=Shutter serial=139951 10:42:05 Shutter LASER close 10:42:05 Received message from Camera: op=State serial=139953 10:42:05 GetSingleValue result=40 Value=cccccccc 10:42:05 SkyScan query 10:42:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:42:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:06 Parameters OK 10:42:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:06 Set A/D data flow result=40 10:42:06 Set A/D channel type result=40 10:42:06 Set A/D encoding result=40 10:42:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:06 Set channel filter=0.000000e+000 result=40 10:42:06 Config A/D Result=40 10:42:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:06 Get A/D filter: -9.255963e+061 result=40 10:42:06 Get A/D value=-858993460 result=40 10:42:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:06 Parameters OK 10:42:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:06 Set A/D data flow result=40 10:42:06 Set A/D channel type result=40 10:42:06 Set A/D encoding result=40 10:42:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:06 Set channel filter=0.000000e+000 result=40 10:42:06 Config A/D Result=40 10:42:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:06 Get A/D filter: -9.255963e+061 result=40 10:42:06 Get A/D value=-858993460 result=40 10:42:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:06 Aux= 10:42:06 Message to Camera, serial 139953 queued 10:42:43 Received message from Master: op=PointingHead serial=139966 10:42:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:42:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:42:43 Point started: ret=0 10:42:43 point_skyscan result=0 10:42:44 Check angles 10:42:44 SkyScan query 10:42:45 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.105<-17407 Statuses=0009 0009 10:42:45 Msec=0 True Az=108.915 Ze=-81.105 Az status=0009 Ze status=0009 10:42:45 Check angles 10:42:45 SkyScan query 10:42:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 10:42:45 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 10:42:45 Check angles 10:42:45 SkyScan query 10:42:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.465<-20231 Statuses=0008 0009 10:42:46 Msec=1500 True Az=112.995 Ze=-123.465 Az status=0008 Ze status=0009 10:42:46 Check angles 10:42:46 SkyScan query 10:42:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 10:42:47 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 10:42:47 Check angles 10:42:47 SkyScan query 10:42:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 10:42:48 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 10:42:48 Check angles 10:42:48 SkyScan query 10:42:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:42:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:42:48 Message to Master queued w/err=0: serial=139966 error=0 10:42:53 Received message from Master: op=Filter serial=139967 10:42:53 Color wheel filter change from 0 to 0 10:42:53 FLIGetFilterPos err=0 currentPosition=0 10:42:53 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:53 Filter is already there-color wheel unchanged 10:42:54 Received message from Master: op=Shutter serial=139968 10:42:54 Shutter LASER open 10:42:54 Received message from Camera: op=State serial=139970 10:42:54 GetSingleValue result=40 Value=cccccccc 10:42:54 SkyScan query 10:42:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:42:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:54 Parameters OK 10:42:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:54 Set A/D data flow result=40 10:42:54 Set A/D channel type result=40 10:42:54 Set A/D encoding result=40 10:42:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:54 Set channel filter=0.000000e+000 result=40 10:42:54 Config A/D Result=40 10:42:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:54 Get A/D filter: -9.255963e+061 result=40 10:42:54 Get A/D value=-858993460 result=40 10:42:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:54 Parameters OK 10:42:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:54 Set A/D data flow result=40 10:42:54 Set A/D channel type result=40 10:42:54 Set A/D encoding result=40 10:42:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:54 Set channel filter=0.000000e+000 result=40 10:42:54 Config A/D Result=40 10:42:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:54 Get A/D filter: -9.255963e+061 result=40 10:42:54 Get A/D value=-858993460 result=40 10:42:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:54 Aux= 10:42:54 Message to Camera, serial 139970 queued 10:43:03 Received message from Master: op=Shutter serial=139980 10:43:03 Shutter LASER close 10:43:03 Received message from Master: op=PointingHead serial=139984 10:43:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:43:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:43:04 Point started: ret=0 10:43:04 point_skyscan result=0 10:43:04 Check angles 10:43:04 SkyScan query 10:43:05 SkyScan query done: ret=0 az=89.415<-5961 ze=156.615<-1559 Statuses=0009 0009 10:43:05 Msec=0 True Az=89.415 Ze=156.615 Az status=0009 Ze status=0009 10:43:05 Check angles 10:43:05 SkyScan query 10:43:06 SkyScan query done: ret=0 az=71.91<-4794 ze=135.69<-2954 Statuses=0009 0009 10:43:06 Msec=750 True Az=71.91 Ze=135.69 Az status=0009 Ze status=0009 10:43:06 Check angles 10:43:06 SkyScan query 10:43:06 SkyScan query done: ret=0 az=54.51<-3634 ze=114.69<-4354 Statuses=0009 0009 10:43:06 Msec=1500 True Az=54.51 Ze=114.69 Az status=0009 Ze status=0009 10:43:07 Check angles 10:43:07 SkyScan query 10:43:07 SkyScan query done: ret=0 az=40.98<-2732 ze=93.765<-5749 Statuses=0009 0009 10:43:07 Msec=2250 True Az=40.98 Ze=93.765 Az status=0009 Ze status=0009 10:43:07 Check angles 10:43:07 SkyScan query 10:43:08 SkyScan query done: ret=0 az=40.995<-2733 ze=72.795<-7147 Statuses=0008 0009 10:43:08 Msec=3000 True Az=40.995 Ze=72.795 Az status=0008 Ze status=0009 10:43:08 Check angles 10:43:08 SkyScan query 10:43:09 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 10:43:09 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 10:43:09 Check angles 10:43:09 SkyScan query 10:43:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:43:09 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:43:09 Message to Master queued w/err=0: serial=139984 error=0 10:43:14 Received message from Master: op=Filter serial=139985 10:43:14 Color wheel filter change from 0 to 0 10:43:14 FLIGetFilterPos err=0 currentPosition=0 10:43:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:14 Filter is already there-color wheel unchanged 10:43:15 Received message from Master: op=Shutter serial=139986 10:43:15 Shutter LASER close 10:43:15 Received message from Camera: op=State serial=139988 10:43:15 GetSingleValue result=40 Value=cccccccc 10:43:15 SkyScan query 10:43:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:43:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:15 Parameters OK 10:43:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:15 Set A/D data flow result=40 10:43:15 Set A/D channel type result=40 10:43:15 Set A/D encoding result=40 10:43:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:15 Set channel filter=0.000000e+000 result=40 10:43:15 Config A/D Result=40 10:43:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:15 Get A/D filter: -9.255963e+061 result=40 10:43:15 Get A/D value=-858993460 result=40 10:43:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:15 Parameters OK 10:43:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:15 Set A/D data flow result=40 10:43:15 Set A/D channel type result=40 10:43:15 Set A/D encoding result=40 10:43:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:15 Set channel filter=0.000000e+000 result=40 10:43:15 Config A/D Result=40 10:43:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:15 Get A/D filter: -9.255963e+061 result=40 10:43:15 Get A/D value=-858993460 result=40 10:43:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:15 Aux= 10:43:15 Message to Camera, serial 139988 queued 10:43:52 Received message from Master: op=PointingHead serial=140001 10:43:52 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:43:52 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:43:52 Point started: ret=0 10:43:52 point_skyscan result=0 10:43:53 Check angles 10:43:53 SkyScan query 10:43:54 SkyScan query done: ret=0 az=63.855<-4257 ze=66.555<-7563 Statuses=0009 0008 10:43:54 Msec=0 True Az=63.855 Ze=66.555 Az status=0009 Ze status=0008 10:43:54 Check angles 10:43:54 SkyScan query 10:43:55 SkyScan query done: ret=0 az=81.315<-5421 ze=66.51<-7566 Statuses=0009 0008 10:43:55 Msec=750 True Az=81.315 Ze=66.51 Az status=0009 Ze status=0008 10:43:55 Check angles 10:43:55 SkyScan query 10:43:55 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 10:43:55 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 10:43:55 Check angles 10:43:55 SkyScan query 10:43:56 SkyScan query done: ret=0 az=116.64<-7776 ze=66.495<-7567 Statuses=0009 0008 10:43:56 Msec=2250 True Az=116.64 Ze=66.495 Az status=0009 Ze status=0008 10:43:56 Check angles 10:43:56 SkyScan query 10:43:57 SkyScan query done: ret=0 az=134.13<-8942 ze=66.495<-7567 Statuses=0009 0008 10:43:57 Msec=3000 True Az=134.13 Ze=66.495 Az status=0009 Ze status=0008 10:43:57 Check angles 10:43:57 SkyScan query 10:43:58 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 10:43:58 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 10:43:58 Check angles 10:43:58 SkyScan query 10:43:58 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:43:58 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:43:58 Message to Master queued w/err=0: serial=140001 error=0 10:44:03 Received message from Master: op=Filter serial=140002 10:44:03 Color wheel filter change from 0 to 0 10:44:03 FLIGetFilterPos err=0 currentPosition=0 10:44:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:03 Filter is already there-color wheel unchanged 10:44:03 Received message from Master: op=Shutter serial=140003 10:44:03 Shutter LASER close 10:44:04 Received message from Camera: op=State serial=140005 10:44:04 GetSingleValue result=40 Value=cccccccc 10:44:04 SkyScan query 10:44:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:44:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:04 Parameters OK 10:44:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:04 Set A/D data flow result=40 10:44:04 Set A/D channel type result=40 10:44:04 Set A/D encoding result=40 10:44:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:04 Set channel filter=0.000000e+000 result=40 10:44:04 Config A/D Result=40 10:44:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:04 Get A/D filter: -9.255963e+061 result=40 10:44:04 Get A/D value=-858993460 result=40 10:44:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:04 Parameters OK 10:44:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:04 Set A/D data flow result=40 10:44:04 Set A/D channel type result=40 10:44:04 Set A/D encoding result=40 10:44:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:04 Set channel filter=0.000000e+000 result=40 10:44:04 Config A/D Result=40 10:44:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:04 Get A/D filter: -9.255963e+061 result=40 10:44:04 Get A/D value=-858993460 result=40 10:44:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:04 Aux= 10:44:04 Message to Camera, serial 140005 queued 10:44:41 Received message from Master: op=PointingHead serial=140018 10:44:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:44:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:44:41 Point started: ret=0 10:44:41 point_skyscan result=0 10:44:42 Check angles 10:44:42 SkyScan query 10:44:43 SkyScan query done: ret=0 az=134.835<-8989 ze=36.675<-9555 Statuses=0009 0009 10:44:43 Msec=0 True Az=134.835 Ze=36.675 Az status=0009 Ze status=0009 10:44:43 Check angles 10:44:43 SkyScan query 10:44:43 SkyScan query done: ret=0 az=117.48<-7832 ze=15.765<-10949 Statuses=0009 0009 10:44:43 Msec=750 True Az=117.48 Ze=15.765 Az status=0009 Ze status=0009 10:44:44 Check angles 10:44:44 SkyScan query 10:44:44 SkyScan query done: ret=0 az=100.08<-6672 ze=-5.235<-12349 Statuses=0009 0009 10:44:44 Msec=1500 True Az=100.08 Ze=-5.235 Az status=0009 Ze status=0009 10:44:44 Check angles 10:44:44 SkyScan query 10:44:45 SkyScan query done: ret=0 az=82.605<-5507 ze=-26.19<-13746 Statuses=0009 0009 10:44:45 Msec=2250 True Az=82.605 Ze=-26.19 Az status=0009 Ze status=0009 10:44:45 Check angles 10:44:45 SkyScan query 10:44:46 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.58<-14572 Statuses=0009 0008 10:44:46 Msec=3000 True Az=64.68 Ze=-38.58 Az status=0009 Ze status=0008 10:44:46 Check angles 10:44:46 SkyScan query 10:44:46 SkyScan query done: ret=0 az=47.31<-3154 ze=-38.52<-14568 Statuses=0009 0008 10:44:46 Msec=3750 True Az=47.31 Ze=-38.52 Az status=0009 Ze status=0008 10:44:47 Check angles 10:44:47 SkyScan query 10:44:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:44:47 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:44:47 Message to Master queued w/err=0: serial=140018 error=0 10:44:52 Received message from Master: op=Filter serial=140019 10:44:52 Color wheel filter change from 0 to 0 10:44:52 FLIGetFilterPos err=0 currentPosition=0 10:44:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:52 Filter is already there-color wheel unchanged 10:44:52 Received message from Master: op=Shutter serial=140020 10:44:52 Shutter LASER close 10:44:52 Received message from Camera: op=State serial=140022 10:44:52 GetSingleValue result=40 Value=cccccccc 10:44:52 SkyScan query 10:44:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:44:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:53 Parameters OK 10:44:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:53 Set A/D data flow result=40 10:44:53 Set A/D channel type result=40 10:44:53 Set A/D encoding result=40 10:44:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:53 Set channel filter=0.000000e+000 result=40 10:44:53 Config A/D Result=40 10:44:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:53 Get A/D filter: -9.255963e+061 result=40 10:44:53 Get A/D value=-858993460 result=40 10:44:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:53 Parameters OK 10:44:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:53 Set A/D data flow result=40 10:44:53 Set A/D channel type result=40 10:44:53 Set A/D encoding result=40 10:44:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:53 Set channel filter=0.000000e+000 result=40 10:44:53 Config A/D Result=40 10:44:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:53 Get A/D filter: -9.255963e+061 result=40 10:44:53 Get A/D value=-858993460 result=40 10:44:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:53 Aux= 10:44:53 Message to Camera, serial 140022 queued 10:45:27 Received message from Master: op=Identify serial=140029 10:45:30 Received message from Master: op=PointingHead serial=140038 10:45:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:45:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:45:30 Point started: ret=0 10:45:30 point_skyscan result=0 10:45:31 Check angles 10:45:31 SkyScan query 10:45:31 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.475<-16565 Statuses=0009 0009 10:45:31 Msec=0 True Az=64.17 Ze=-68.475 Az status=0009 Ze status=0009 10:45:32 Check angles 10:45:32 SkyScan query 10:45:32 SkyScan query done: ret=0 az=82.065<-5471 ze=-89.865<-17991 Statuses=0009 0009 10:45:32 Msec=750 True Az=82.065 Ze=-89.865 Az status=0009 Ze status=0009 10:45:32 Check angles 10:45:32 SkyScan query 10:45:33 SkyScan query done: ret=0 az=99.42<-6628 ze=-110.82<-19388 Statuses=0009 0009 10:45:33 Msec=1500 True Az=99.42 Ze=-110.82 Az status=0009 Ze status=0009 10:45:33 Check angles 10:45:33 SkyScan query 10:45:34 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.73<-20782 Statuses=0009 0009 10:45:34 Msec=2250 True Az=116.895 Ze=-131.73 Az status=0009 Ze status=0009 10:45:34 Check angles 10:45:34 SkyScan query 10:45:34 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 10:45:34 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 10:45:35 Check angles 10:45:35 SkyScan query 10:45:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 10:45:35 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 10:45:35 Message to Master queued w/err=0: serial=140038 error=0 10:45:40 Received message from Master: op=Filter serial=140039 10:45:40 Color wheel filter change from 0 to 0 10:45:40 FLIGetFilterPos err=0 currentPosition=0 10:45:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:40 Filter is already there-color wheel unchanged 10:45:40 Received message from Master: op=Shutter serial=140040 10:45:40 Shutter LASER close 10:45:40 Received message from Camera: op=State serial=140042 10:45:40 GetSingleValue result=40 Value=cccccccc 10:45:40 SkyScan query 10:45:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:45:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:41 Parameters OK 10:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:41 Set A/D data flow result=40 10:45:41 Set A/D channel type result=40 10:45:41 Set A/D encoding result=40 10:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:41 Set channel filter=0.000000e+000 result=40 10:45:41 Config A/D Result=40 10:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:41 Get A/D filter: -9.255963e+061 result=40 10:45:41 Get A/D value=-858993460 result=40 10:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:41 Parameters OK 10:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:41 Set A/D data flow result=40 10:45:41 Set A/D channel type result=40 10:45:41 Set A/D encoding result=40 10:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 [UTC 2018-12-14 10:45:41] 10:45:41 Set channel filter=0.000000e+000 result=40 10:45:41 Config A/D Result=40 10:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:41 Get A/D filter: -9.255963e+061 result=40 10:45:41 Get A/D value=-858993460 result=40 10:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:45:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:45:41 Aux= 10:45:41 Message to Camera, serial 140042 queued 10:46:18 Received message from Master: op=PointingHead serial=140055 10:46:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:46:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:46:18 Point started: ret=0 10:46:18 point_skyscan result=0 10:46:19 Check angles 10:46:19 SkyScan query 10:46:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 10:46:19 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 10:46:20 Check angles 10:46:20 SkyScan query 10:46:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:46:20 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:46:20 Message to Master queued w/err=0: serial=140055 error=0 10:46:25 Received message from Master: op=Filter serial=140056 10:46:25 Color wheel filter change from 0 to 0 10:46:25 FLIGetFilterPos err=0 currentPosition=0 10:46:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:25 Filter is already there-color wheel unchanged 10:46:25 Received message from Master: op=Shutter serial=140057 10:46:25 Shutter LASER open 10:46:26 Received message from Camera: op=State serial=140059 10:46:26 GetSingleValue result=40 Value=cccccccc 10:46:26 SkyScan query 10:46:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:46:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:26 Parameters OK 10:46:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:26 Set A/D data flow result=40 10:46:26 Set A/D channel type result=40 10:46:26 Set A/D encoding result=40 10:46:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:26 Set channel filter=0.000000e+000 result=40 10:46:26 Config A/D Result=40 10:46:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:26 Get A/D filter: -9.255963e+061 result=40 10:46:26 Get A/D value=-858993460 result=40 10:46:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:26 Parameters OK 10:46:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:26 Set A/D data flow result=40 10:46:26 Set A/D channel type result=40 10:46:26 Set A/D encoding result=40 10:46:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:26 Set channel filter=0.000000e+000 result=40 10:46:26 Config A/D Result=40 10:46:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:26 Get A/D filter: -9.255963e+061 result=40 10:46:26 Get A/D value=-858993460 result=40 10:46:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:26 Aux= 10:46:26 Message to Camera, serial 140059 queued 10:46:35 Received message from Master: op=Shutter serial=140069 10:46:35 Shutter LASER close 10:46:35 Received message from Master: op=PointingHead serial=140073 10:46:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:46:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:46:36 Point started: ret=0 10:46:36 point_skyscan result=0 10:46:36 Check angles 10:46:36 SkyScan query 10:46:37 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.965<-21531 Statuses=0009 0009 10:46:37 Msec=0 True Az=136.215 Ze=-142.965 Az status=0009 Ze status=0009 10:46:37 Check angles 10:46:37 SkyScan query 10:46:38 SkyScan query done: ret=0 az=153.66<-10244 ze=-121.995<-20133 Statuses=0009 0009 10:46:38 Msec=750 True Az=153.66 Ze=-121.995 Az status=0009 Ze status=0009 10:46:38 Check angles 10:46:38 SkyScan query 10:46:38 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.01<-18734 Statuses=0009 0009 10:46:38 Msec=1500 True Az=171.24 Ze=-101.01 Az status=0009 Ze status=0009 10:46:39 Check angles 10:46:39 SkyScan query 10:46:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.115<-17341 Statuses=0008 0009 10:46:39 Msec=2250 True Az=176.01 Ze=-80.115 Az status=0008 Ze status=0009 10:46:39 Check angles 10:46:39 SkyScan query 10:46:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.115<-15941 Statuses=0008 0009 10:46:40 Msec=3000 True Az=176.01 Ze=-59.115 Az status=0008 Ze status=0009 10:46:40 Check angles 10:46:40 SkyScan query 10:46:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:46:41 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:46:41 Message to Master queued w/err=0: serial=140073 error=0 10:46:46 Received message from Master: op=Filter serial=140074 10:46:46 Color wheel filter change from 0 to 0 10:46:46 FLIGetFilterPos err=0 currentPosition=0 10:46:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:46 Filter is already there-color wheel unchanged 10:46:46 Received message from Master: op=Shutter serial=140075 10:46:46 Shutter LASER close 10:46:46 Received message from Camera: op=State serial=140077 10:46:46 GetSingleValue result=40 Value=cccccccc 10:46:46 SkyScan query 10:46:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:46:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:47 Parameters OK 10:46:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:47 Set A/D data flow result=40 10:46:47 Set A/D channel type result=40 10:46:47 Set A/D encoding result=40 10:46:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:47 Set channel filter=0.000000e+000 result=40 10:46:47 Config A/D Result=40 10:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:47 Get A/D filter: -9.255963e+061 result=40 10:46:47 Get A/D value=-858993460 result=40 10:46:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:47 Parameters OK 10:46:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:47 Set A/D data flow result=40 10:46:47 Set A/D channel type result=40 10:46:47 Set A/D encoding result=40 10:46:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:47 Set channel filter=0.000000e+000 result=40 10:46:47 Config A/D Result=40 10:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:47 Get A/D filter: -9.255963e+061 result=40 10:46:47 Get A/D value=-858993460 result=40 10:46:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:47 Aux= 10:46:47 Message to Camera, serial 140077 queued 10:47:22 Received message from Master: op=PointingHead serial=140089 10:47:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:47:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:47:23 Point started: ret=0 10:47:23 point_skyscan result=0 10:47:24 Check angles 10:47:24 SkyScan query 10:47:24 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.165<-13411 Statuses=0009 0009 10:47:24 Msec=0 True Az=152.58 Ze=-21.165 Az status=0009 Ze status=0009 10:47:24 Check angles 10:47:24 SkyScan query 10:47:25 SkyScan query done: ret=0 az=135<-9000 ze=-0.24<-12016 Statuses=0009 0009 10:47:25 Msec=750 True Az=135 Ze=-0.24 Az status=0009 Ze status=0009 10:47:25 Check angles 10:47:25 SkyScan query 10:47:26 SkyScan query done: ret=0 az=117.18<-7812 ze=21.18<-10588 Statuses=0009 0009 10:47:26 Msec=1500 True Az=117.18 Ze=21.18 Az status=0009 Ze status=0009 10:47:26 Check angles 10:47:26 SkyScan query 10:47:26 SkyScan query done: ret=0 az=99.75<-6650 ze=42.075<-9195 Statuses=0009 0009 10:47:26 Msec=2250 True Az=99.75 Ze=42.075 Az status=0009 Ze status=0009 10:47:27 Check angles 10:47:27 SkyScan query 10:47:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 10:47:27 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 10:47:27 Check angles 10:47:27 SkyScan query 10:47:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:47:28 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:47:28 Message to Master queued w/err=0: serial=140089 error=0 10:47:33 Received message from Master: op=Filter serial=140090 10:47:33 Color wheel filter change from 0 to 0 10:47:33 FLIGetFilterPos err=0 currentPosition=0 10:47:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:33 Filter is already there-color wheel unchanged 10:47:33 Received message from Master: op=Shutter serial=140091 10:47:33 Shutter LASER close 10:47:33 Received message from Camera: op=State serial=140093 10:47:33 GetSingleValue result=40 Value=cccccccc 10:47:33 SkyScan query 10:47:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:47:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:34 Parameters OK 10:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:34 Set A/D data flow result=40 10:47:34 Set A/D channel type result=40 10:47:34 Set A/D encoding result=40 10:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:34 Set channel filter=0.000000e+000 result=40 10:47:34 Config A/D Result=40 10:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:34 Get A/D filter: -9.255963e+061 result=40 10:47:34 Get A/D value=-858993460 result=40 10:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:34 Parameters OK 10:47:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:34 Set A/D data flow result=40 10:47:34 Set A/D channel type result=40 10:47:34 Set A/D encoding result=40 10:47:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:34 Set channel filter=0.000000e+000 result=40 10:47:34 Config A/D Result=40 10:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:34 Get A/D filter: -9.255963e+061 result=40 10:47:34 Get A/D value=-858993460 result=40 10:47:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:34 Aux= 10:47:34 Message to Camera, serial 140093 queued 10:48:11 Received message from Master: op=PointingHead serial=140106 10:48:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:48:11 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:48:11 Point started: ret=0 10:48:11 point_skyscan result=0 10:48:12 Check angles 10:48:12 SkyScan query 10:48:12 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 10:48:12 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 10:48:12 Check angles 10:48:12 SkyScan query 10:48:13 SkyScan query done: ret=0 az=126.555<-8437 ze=38.505<-9433 Statuses=0009 0008 10:48:13 Msec=750 True Az=126.555 Ze=38.505 Az status=0009 Ze status=0008 10:48:13 Check angles 10:48:13 SkyScan query 10:48:14 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 10:48:14 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 10:48:14 Check angles 10:48:14 SkyScan query 10:48:14 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 10:48:14 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 10:48:15 Check angles 10:48:15 SkyScan query 10:48:15 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:48:15 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:48:15 Check angles 10:48:15 SkyScan query 10:48:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:48:16 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:48:16 Message to Master queued w/err=0: serial=140106 error=0 10:48:21 Received message from Master: op=Filter serial=140107 10:48:21 Color wheel filter change from 0 to 0 10:48:21 FLIGetFilterPos err=0 currentPosition=0 10:48:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:21 Filter is already there-color wheel unchanged 10:48:21 Received message from Master: op=Shutter serial=140108 10:48:21 Shutter LASER close 10:48:21 Received message from Camera: op=State serial=140110 10:48:21 GetSingleValue result=40 Value=cccccccc 10:48:21 SkyScan query 10:48:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:48:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:22 Parameters OK 10:48:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:22 Set A/D data flow result=40 10:48:22 Set A/D channel type result=40 10:48:22 Set A/D encoding result=40 10:48:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:22 Set channel filter=0.000000e+000 result=40 10:48:22 Config A/D Result=40 10:48:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:22 Get A/D filter: -9.255963e+061 result=40 10:48:22 Get A/D value=-858993460 result=40 10:48:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:22 Parameters OK 10:48:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:22 Set A/D data flow result=40 10:48:22 Set A/D channel type result=40 10:48:22 Set A/D encoding result=40 10:48:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:22 Set channel filter=0.000000e+000 result=40 10:48:22 Config A/D Result=40 10:48:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:22 Get A/D filter: -9.255963e+061 result=40 10:48:22 Get A/D value=-858993460 result=40 10:48:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:22 Aux= 10:48:22 Message to Camera, serial 140110 queued 10:48:59 Received message from Master: op=PointingHead serial=140123 10:48:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:48:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:48:59 Point started: ret=0 10:48:59 point_skyscan result=0 10:49:00 Check angles 10:49:00 SkyScan query 10:49:00 SkyScan query done: ret=0 az=152.745<-10183 ze=8.31<-11446 Statuses=0009 0009 10:49:00 Msec=0 True Az=152.745 Ze=8.31 Az status=0009 Ze status=0009 10:49:00 Check angles 10:49:00 SkyScan query 10:49:01 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.585<-12839 Statuses=0009 0009 10:49:01 Msec=750 True Az=135.285 Ze=-12.585 Az status=0009 Ze status=0009 10:49:01 Check angles 10:49:01 SkyScan query 10:49:02 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.57<-14238 Statuses=0009 0009 10:49:02 Msec=1500 True Az=117.78 Ze=-33.57 Az status=0009 Ze status=0009 10:49:02 Check angles 10:49:02 SkyScan query 10:49:03 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.57<-15438 Statuses=0009 0009 10:49:03 Msec=2250 True Az=100.38 Ze=-51.57 Az status=0009 Ze status=0009 10:49:03 Check angles 10:49:03 SkyScan query 10:49:03 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:49:03 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:49:03 Check angles 10:49:03 SkyScan query 10:49:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:49:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:49:04 Message to Master queued w/err=0: serial=140123 error=0 10:49:09 Received message from Master: op=Filter serial=140124 10:49:09 Color wheel filter change from 0 to 0 10:49:09 FLIGetFilterPos err=0 currentPosition=0 10:49:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:09 Filter is already there-color wheel unchanged 10:49:09 Received message from Master: op=Shutter serial=140125 10:49:09 Shutter LASER close 10:49:09 Received message from Camera: op=State serial=140127 10:49:09 GetSingleValue result=40 Value=cccccccc 10:49:09 SkyScan query 10:49:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:49:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:10 Parameters OK 10:49:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:10 Set A/D data flow result=40 10:49:10 Set A/D channel type result=40 10:49:10 Set A/D encoding result=40 10:49:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:10 Set channel filter=0.000000e+000 result=40 10:49:10 Config A/D Result=40 10:49:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:10 Get A/D filter: -9.255963e+061 result=40 10:49:10 Get A/D value=-858993460 result=40 10:49:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:10 Parameters OK 10:49:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:10 Set A/D data flow result=40 10:49:10 Set A/D channel type result=40 10:49:10 Set A/D encoding result=40 10:49:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:10 Set channel filter=0.000000e+000 result=40 10:49:10 Config A/D Result=40 10:49:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:10 Get A/D filter: -9.255963e+061 result=40 10:49:10 Get A/D value=-858993460 result=40 10:49:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:10 Aux= 10:49:10 Message to Camera, serial 140127 queued 10:49:47 Received message from Master: op=PointingHead serial=140140 10:49:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:49:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:49:47 Point started: ret=0 10:49:47 point_skyscan result=0 10:49:48 Check angles 10:49:48 SkyScan query 10:49:48 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.42<-17428 Statuses=0009 0009 10:49:48 Msec=0 True Az=109.155 Ze=-81.42 Az status=0009 Ze status=0009 10:49:49 Check angles 10:49:49 SkyScan query 10:49:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 10:49:49 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 10:49:49 Check angles 10:49:49 SkyScan query 10:49:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.765<-20251 Statuses=0008 0009 10:49:50 Msec=1500 True Az=112.995 Ze=-123.765 Az status=0008 Ze status=0009 10:49:50 Check angles 10:49:50 SkyScan query 10:49:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.675<-21645 Statuses=0008 0009 10:49:51 Msec=2250 True Az=112.995 Ze=-144.675 Az status=0008 Ze status=0009 10:49:51 Check angles 10:49:51 SkyScan query 10:49:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 10:49:51 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 10:49:52 Check angles 10:49:52 SkyScan query 10:49:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:49:52 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:49:52 Message to Master queued w/err=0: serial=140140 error=0 10:49:57 Received message from Master: op=Filter serial=140141 10:49:57 Color wheel filter change from 0 to 0 10:49:57 FLIGetFilterPos err=0 currentPosition=0 10:49:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:57 Filter is already there-color wheel unchanged 10:49:57 Received message from Master: op=Shutter serial=140142 10:49:57 Shutter LASER open 10:49:57 Received message from Camera: op=State serial=140144 10:49:57 GetSingleValue result=40 Value=cccccccc 10:49:57 SkyScan query 10:49:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:49:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:58 Parameters OK 10:49:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:58 Set A/D data flow result=40 10:49:58 Set A/D channel type result=40 10:49:58 Set A/D encoding result=40 10:49:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:58 Set channel filter=0.000000e+000 result=40 10:49:58 Config A/D Result=40 10:49:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:58 Get A/D filter: -9.255963e+061 result=40 10:49:58 Get A/D value=-858993460 result=40 10:49:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:58 Parameters OK 10:49:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:58 Set A/D data flow result=40 10:49:58 Set A/D channel type result=40 10:49:58 Set A/D encoding result=40 10:49:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:58 Set channel filter=0.000000e+000 result=40 10:49:58 Config A/D Result=40 10:49:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:58 Get A/D filter: -9.255963e+061 result=40 10:49:58 Get A/D value=-858993460 result=40 10:49:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:58 Aux= 10:49:58 Message to Camera, serial 140144 queued 10:50:06 Received message from Master: op=Shutter serial=140154 10:50:06 Shutter LASER close 10:50:07 Received message from Master: op=PointingHead serial=140158 10:50:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:50:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:50:07 Point started: ret=0 10:50:07 point_skyscan result=0 10:50:08 Check angles 10:50:08 SkyScan query 10:50:09 SkyScan query done: ret=0 az=89.775<-5985 ze=157.065<-1529 Statuses=0009 0009 10:50:09 Msec=0 True Az=89.775 Ze=157.065 Az status=0009 Ze status=0009 10:50:09 Check angles 10:50:09 SkyScan query 10:50:09 SkyScan query done: ret=0 az=71.925<-4795 ze=135.66<-2956 Statuses=0009 0009 10:50:09 Msec=750 True Az=71.925 Ze=135.66 Az status=0009 Ze status=0009 10:50:10 Check angles 10:50:10 SkyScan query 10:50:10 SkyScan query done: ret=0 az=54.51<-3634 ze=114.675<-4355 Statuses=0009 0009 10:50:10 Msec=1500 True Az=54.51 Ze=114.675 Az status=0009 Ze status=0009 10:50:10 Check angles 10:50:10 SkyScan query 10:50:11 SkyScan query done: ret=0 az=40.98<-2732 ze=93.765<-5749 Statuses=0009 0009 10:50:11 Msec=2250 True Az=40.98 Ze=93.765 Az status=0009 Ze status=0009 10:50:11 Check angles 10:50:11 SkyScan query 10:50:12 SkyScan query done: ret=0 az=40.98<-2732 ze=72.36<-7176 Statuses=0008 0009 10:50:12 Msec=3000 True Az=40.98 Ze=72.36 Az status=0008 Ze status=0009 10:50:12 Check angles 10:50:12 SkyScan query 10:50:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.215<-8519 Statuses=0008 0009 10:50:12 Msec=3750 True Az=40.995 Ze=52.215 Az status=0008 Ze status=0009 10:50:13 Check angles 10:50:13 SkyScan query 10:50:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:50:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:50:13 Message to Master queued w/err=0: serial=140158 error=0 10:50:18 Received message from Master: op=Filter serial=140159 10:50:18 Color wheel filter change from 0 to 0 10:50:18 FLIGetFilterPos err=0 currentPosition=0 10:50:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:18 Filter is already there-color wheel unchanged 10:50:18 Received message from Master: op=Shutter serial=140160 10:50:18 Shutter LASER close 10:50:18 Received message from Camera: op=State serial=140162 10:50:18 GetSingleValue result=40 Value=cccccccc 10:50:18 SkyScan query 10:50:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:50:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:19 Parameters OK 10:50:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:19 Set A/D data flow result=40 10:50:19 Set A/D channel type result=40 10:50:19 Set A/D encoding result=40 10:50:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:19 Set channel filter=0.000000e+000 result=40 10:50:19 Config A/D Result=40 10:50:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:19 Get A/D filter: -9.255963e+061 result=40 10:50:19 Get A/D value=-858993460 result=40 10:50:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:19 Parameters OK 10:50:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:19 Set A/D data flow result=40 10:50:19 Set A/D channel type result=40 10:50:19 Set A/D encoding result=40 10:50:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:19 Set channel filter=0.000000e+000 result=40 10:50:19 Config A/D Result=40 10:50:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:19 Get A/D filter: -9.255963e+061 result=40 10:50:19 Get A/D value=-858993460 result=40 10:50:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:19 Aux= 10:50:19 Message to Camera, serial 140162 queued 10:50:56 Received message from Master: op=PointingHead serial=140175 10:50:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:50:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:50:56 Point started: ret=0 10:50:56 point_skyscan result=0 10:50:57 Check angles 10:50:57 SkyScan query 10:50:58 SkyScan query done: ret=0 az=64.185<-4279 ze=66.555<-7563 Statuses=0009 0008 10:50:58 Msec=0 True Az=64.185 Ze=66.555 Az status=0009 Ze status=0008 10:50:58 Check angles 10:50:58 SkyScan query 10:50:58 SkyScan query done: ret=0 az=81.705<-5447 ze=66.51<-7566 Statuses=0009 0008 10:50:58 Msec=750 True Az=81.705 Ze=66.51 Az status=0009 Ze status=0008 10:50:58 Check angles 10:50:58 SkyScan query 10:50:59 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 10:50:59 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 10:50:59 Check angles 10:50:59 SkyScan query 10:51:00 SkyScan query done: ret=0 az=116.67<-7778 ze=66.495<-7567 Statuses=0009 0008 10:51:00 Msec=2250 True Az=116.67 Ze=66.495 Az status=0009 Ze status=0008 10:51:00 Check angles 10:51:00 SkyScan query 10:51:01 SkyScan query done: ret=0 az=134.175<-8945 ze=66.495<-7567 Statuses=0009 0008 10:51:01 Msec=3000 True Az=134.175 Ze=66.495 Az status=0009 Ze status=0008 10:51:01 Check angles 10:51:01 SkyScan query 10:51:01 SkyScan query done: ret=0 az=151.875<-10125 ze=66.495<-7567 Statuses=0009 0008 10:51:01 Msec=3750 True Az=151.875 Ze=66.495 Az status=0009 Ze status=0008 10:51:01 Check angles 10:51:01 SkyScan query 10:51:02 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:51:02 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:51:02 Message to Master queued w/err=0: serial=140175 error=0 10:51:07 Received message from Master: op=Filter serial=140176 10:51:07 Color wheel filter change from 0 to 0 10:51:07 FLIGetFilterPos err=0 currentPosition=0 10:51:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:07 Filter is already there-color wheel unchanged 10:51:07 Received message from Master: op=Shutter serial=140177 10:51:07 Shutter LASER close 10:51:07 Received message from Camera: op=State serial=140179 10:51:07 GetSingleValue result=40 Value=cccccccc 10:51:07 SkyScan query 10:51:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:51:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:08 Parameters OK 10:51:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:08 Set A/D data flow result=40 10:51:08 Set A/D channel type result=40 10:51:08 Set A/D encoding result=40 10:51:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:08 Set channel filter=0.000000e+000 result=40 10:51:08 Config A/D Result=40 10:51:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:08 Get A/D filter: -9.255963e+061 result=40 10:51:08 Get A/D value=-858993460 result=40 10:51:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:08 Parameters OK 10:51:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:08 Set A/D data flow result=40 10:51:08 Set A/D channel type result=40 10:51:08 Set A/D encoding result=40 10:51:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:08 Set channel filter=0.000000e+000 result=40 10:51:08 Config A/D Result=40 10:51:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:08 Get A/D filter: -9.255963e+061 result=40 10:51:08 Get A/D value=-858993460 result=40 10:51:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:08 Aux= 10:51:08 Message to Camera, serial 140179 queued 10:51:44 Received message from Master: op=PointingHead serial=140191 10:51:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:51:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:51:44 Point started: ret=0 10:51:44 point_skyscan result=0 10:51:45 Check angles 10:51:45 SkyScan query 10:51:45 SkyScan query done: ret=0 az=135.105<-9007 ze=36.885<-9541 Statuses=0009 0009 10:51:45 Msec=0 True Az=135.105 Ze=36.885 Az status=0009 Ze status=0009 10:51:46 Check angles 10:51:46 SkyScan query 10:51:46 SkyScan query done: ret=0 az=117.27<-7818 ze=15.555<-10963 Statuses=0009 0009 10:51:46 Msec=750 True Az=117.27 Ze=15.555 Az status=0009 Ze status=0009 10:51:46 Check angles 10:51:46 SkyScan query 10:51:47 SkyScan query done: ret=0 az=99.465<-6631 ze=-5.955<-12397 Statuses=0009 0009 10:51:47 Msec=1500 True Az=99.465 Ze=-5.955 Az status=0009 Ze status=0009 10:51:47 Check angles 10:51:47 SkyScan query 10:51:48 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.985<-13799 Statuses=0009 0009 10:51:48 Msec=2250 True Az=82.035 Ze=-26.985 Az status=0009 Ze status=0009 10:51:48 Check angles 10:51:48 SkyScan query 10:51:48 SkyScan query done: ret=0 az=64.53<-4302 ze=-38.58<-14572 Statuses=0009 0008 10:51:48 Msec=3000 True Az=64.53 Ze=-38.58 Az status=0009 Ze status=0008 10:51:49 Check angles 10:51:49 SkyScan query 10:51:49 SkyScan query done: ret=0 az=47.07<-3138 ze=-38.52<-14568 Statuses=0009 0008 10:51:49 Msec=3750 True Az=47.07 Ze=-38.52 Az status=0009 Ze status=0008 10:51:49 Check angles 10:51:49 SkyScan query 10:51:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:51:50 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:51:50 Message to Master queued w/err=0: serial=140191 error=0 10:51:55 Received message from Master: op=Filter serial=140192 10:51:55 Color wheel filter change from 0 to 0 10:51:55 FLIGetFilterPos err=0 currentPosition=0 10:51:55 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:55 Filter is already there-color wheel unchanged 10:51:55 Received message from Master: op=Shutter serial=140193 10:51:55 Shutter LASER close 10:51:55 Received message from Camera: op=State serial=140195 10:51:55 GetSingleValue result=40 Value=cccccccc 10:51:55 SkyScan query 10:51:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:51:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:56 Parameters OK 10:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:56 Set A/D data flow result=40 10:51:56 Set A/D channel type result=40 10:51:56 Set A/D encoding result=40 10:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:56 Set channel filter=0.000000e+000 result=40 10:51:56 Config A/D Result=40 10:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:56 Get A/D filter: -9.255963e+061 result=40 10:51:56 Get A/D value=-858993460 result=40 10:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:56 Parameters OK 10:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:56 Set A/D data flow result=40 10:51:56 Set A/D channel type result=40 10:51:56 Set A/D encoding result=40 10:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:56 Set channel filter=0.000000e+000 result=40 10:51:56 Config A/D Result=40 10:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:56 Get A/D filter: -9.255963e+061 result=40 10:51:56 Get A/D value=-858993460 result=40 10:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:56 Aux= 10:51:56 Message to Camera, serial 140195 queued 10:52:32 Received message from Master: op=PointingHead serial=140207 10:52:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:52:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:52:32 Point started: ret=0 10:52:32 point_skyscan result=0 10:52:33 Check angles 10:52:33 SkyScan query 10:52:33 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.055<-16537 Statuses=0009 0009 10:52:33 Msec=0 True Az=63.765 Ze=-68.055 Az status=0009 Ze status=0009 10:52:33 Check angles 10:52:33 SkyScan query 10:52:34 SkyScan query done: ret=0 az=81.24<-5416 ze=-89.04<-17936 Statuses=0009 0009 10:52:34 Msec=750 True Az=81.24 Ze=-89.04 Az status=0009 Ze status=0009 10:52:34 Check angles 10:52:34 SkyScan query 10:52:35 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.43<-19362 Statuses=0009 0009 10:52:35 Msec=1500 True Az=99.06 Ze=-110.43 Az status=0009 Ze status=0009 10:52:35 Check angles 10:52:35 SkyScan query 10:52:36 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.775<-20785 Statuses=0009 0009 10:52:36 Msec=2250 True Az=116.925 Ze=-131.775 Az status=0009 Ze status=0009 10:52:36 Check angles 10:52:36 SkyScan query 10:52:36 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 10:52:36 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 10:52:37 Check angles 10:52:37 SkyScan query 10:52:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 10:52:37 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 10:52:37 Message to Master queued w/err=0: serial=140207 error=0 10:52:42 Received message from Master: op=Filter serial=140208 10:52:42 Color wheel filter change from 0 to 0 10:52:42 FLIGetFilterPos err=0 currentPosition=0 10:52:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:42 Filter is already there-color wheel unchanged 10:52:42 Received message from Master: op=Shutter serial=140209 10:52:42 Shutter LASER close 10:52:42 Received message from Camera: op=State serial=140211 10:52:42 GetSingleValue result=40 Value=cccccccc 10:52:42 SkyScan query 10:52:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:52:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:43 Parameters OK 10:52:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:43 Set A/D data flow result=40 10:52:43 Set A/D channel type result=40 10:52:43 Set A/D encoding result=40 10:52:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:43 Set channel filter=0.000000e+000 result=40 10:52:43 Config A/D Result=40 10:52:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:43 Get A/D filter: -9.255963e+061 result=40 10:52:43 Get A/D value=-858993460 result=40 10:52:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:43 Parameters OK 10:52:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:43 Set A/D data flow result=40 10:52:43 Set A/D channel type result=40 10:52:43 Set A/D encoding result=40 10:52:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:43 Set channel filter=0.000000e+000 result=40 10:52:43 Config A/D Result=40 10:52:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:43 Get A/D filter: -9.255963e+061 result=40 10:52:43 Get A/D value=-858993460 result=40 10:52:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:43 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:43 Aux= 10:52:43 Message to Camera, serial 140211 queued 10:53:20 Received message from Master: op=PointingHead serial=140224 10:53:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:53:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:53:20 Point started: ret=0 10:53:20 point_skyscan result=0 10:53:21 Check angles 10:53:21 SkyScan query 10:53:21 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 10:53:21 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 10:53:22 Check angles 10:53:22 SkyScan query 10:53:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:53:22 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:53:22 Message to Master queued w/err=0: serial=140224 error=0 10:53:27 Received message from Master: op=Filter serial=140225 10:53:27 Color wheel filter change from 0 to 0 10:53:27 FLIGetFilterPos err=0 currentPosition=0 10:53:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:27 Filter is already there-color wheel unchanged 10:53:27 Received message from Master: op=Shutter serial=140226 10:53:27 Shutter LASER open 10:53:27 Received message from Camera: op=State serial=140228 10:53:27 GetSingleValue result=40 Value=cccccccc 10:53:27 SkyScan query 10:53:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:53:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:28 Parameters OK 10:53:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:28 Set A/D data flow result=40 10:53:28 Set A/D channel type result=40 10:53:28 Set A/D encoding result=40 10:53:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:28 Set channel filter=0.000000e+000 result=40 10:53:28 Config A/D Result=40 10:53:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:28 Get A/D filter: -9.255963e+061 result=40 10:53:28 Get A/D value=-858993460 result=40 10:53:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:28 Parameters OK 10:53:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:28 Set A/D data flow result=40 10:53:28 Set A/D channel type result=40 10:53:28 Set A/D encoding result=40 10:53:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:28 Set channel filter=0.000000e+000 result=40 10:53:28 Config A/D Result=40 10:53:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:28 Get A/D filter: -9.255963e+061 result=40 10:53:28 Get A/D value=-858993460 result=40 10:53:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:28 Aux= 10:53:28 Message to Camera, serial 140228 queued 10:53:36 Received message from Master: op=Shutter serial=140238 10:53:37 Shutter LASER close 10:53:37 Received message from Master: op=PointingHead serial=140242 10:53:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:53:37 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:53:37 Point started: ret=0 10:53:37 point_skyscan result=0 10:53:38 Check angles 10:53:38 SkyScan query 10:53:39 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.145<-21543 Statuses=0009 0009 10:53:39 Msec=0 True Az=136.17 Ze=-143.145 Az status=0009 Ze status=0009 10:53:39 Check angles 10:53:39 SkyScan query 10:53:40 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.16<-20144 Statuses=0009 0009 10:53:40 Msec=750 True Az=153.54 Ze=-122.16 Az status=0009 Ze status=0009 10:53:40 Check angles 10:53:40 SkyScan query 10:53:40 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.22<-18748 Statuses=0009 0009 10:53:40 Msec=1500 True Az=171.045 Ze=-101.22 Az status=0009 Ze status=0009 10:53:40 Check angles 10:53:40 SkyScan query 10:53:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.295<-17353 Statuses=0008 0009 10:53:41 Msec=2250 True Az=176.01 Ze=-80.295 Az status=0008 Ze status=0009 10:53:41 Check angles 10:53:41 SkyScan query 10:53:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.31<-15954 Statuses=0008 0009 10:53:42 Msec=3000 True Az=176.01 Ze=-59.31 Az status=0008 Ze status=0009 10:53:42 Check angles 10:53:42 SkyScan query 10:53:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:53:43 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:53:43 Message to Master queued w/err=0: serial=140242 error=0 10:53:48 Received message from Master: op=Filter serial=140243 10:53:48 Color wheel filter change from 0 to 0 10:53:48 FLIGetFilterPos err=0 currentPosition=0 10:53:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:48 Filter is already there-color wheel unchanged 10:53:48 Received message from Master: op=Shutter serial=140244 10:53:48 Shutter LASER close 10:53:48 Received message from Camera: op=State serial=140246 10:53:48 GetSingleValue result=40 Value=cccccccc 10:53:48 SkyScan query 10:53:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:53:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:48 Parameters OK 10:53:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:48 Set A/D data flow result=40 10:53:48 Set A/D channel type result=40 10:53:48 Set A/D encoding result=40 10:53:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:48 Set channel filter=0.000000e+000 result=40 10:53:48 Config A/D Result=40 10:53:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:48 Get A/D filter: -9.255963e+061 result=40 10:53:48 Get A/D value=-858993460 result=40 10:53:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:48 Parameters OK 10:53:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:48 Set A/D data flow result=40 10:53:48 Set A/D channel type result=40 10:53:48 Set A/D encoding result=40 10:53:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:48 Set channel filter=0.000000e+000 result=40 10:53:48 Config A/D Result=40 10:53:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:48 Get A/D filter: -9.255963e+061 result=40 10:53:48 Get A/D value=-858993460 result=40 10:53:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:48 Aux= 10:53:48 Message to Camera, serial 140246 queued 10:54:25 Received message from Master: op=PointingHead serial=140259 10:54:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:54:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:54:26 Point started: ret=0 10:54:26 point_skyscan result=0 10:54:26 Check angles 10:54:26 SkyScan query 10:54:27 SkyScan query done: ret=0 az=152.85<-10190 ze=-21.66<-13444 Statuses=0009 0009 10:54:27 Msec=0 True Az=152.85 Ze=-21.66 Az status=0009 Ze status=0009 10:54:27 Check angles 10:54:27 SkyScan query 10:54:28 SkyScan query done: ret=0 az=134.94<-8996 ze=-0.255<-12017 Statuses=0009 0009 10:54:28 Msec=750 True Az=134.94 Ze=-0.255 Az status=0009 Ze status=0009 10:54:28 Check angles 10:54:28 SkyScan query 10:54:28 SkyScan query done: ret=0 az=117.45<-7830 ze=20.7<-10620 Statuses=0009 0009 10:54:28 Msec=1500 True Az=117.45 Ze=20.7 Az status=0009 Ze status=0009 10:54:29 Check angles 10:54:29 SkyScan query 10:54:29 SkyScan query done: ret=0 az=100.08<-6672 ze=41.67<-9222 Statuses=0009 0009 10:54:29 Msec=2250 True Az=100.08 Ze=41.67 Az status=0009 Ze status=0009 10:54:29 Check angles 10:54:29 SkyScan query 10:54:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 10:54:30 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 10:54:30 Check angles 10:54:30 SkyScan query 10:54:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:54:31 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 10:54:31 Message to Master queued w/err=0: serial=140259 error=0 10:54:36 Received message from Master: op=Filter serial=140260 10:54:36 Color wheel filter change from 0 to 0 10:54:36 FLIGetFilterPos err=0 currentPosition=0 10:54:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:36 Filter is already there-color wheel unchanged 10:54:36 Received message from Master: op=Shutter serial=140261 10:54:36 Shutter LASER close 10:54:36 Received message from Camera: op=State serial=140263 10:54:36 GetSingleValue result=40 Value=cccccccc 10:54:36 SkyScan query 10:54:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:54:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:37 Parameters OK 10:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:37 Set A/D data flow result=40 10:54:37 Set A/D channel type result=40 10:54:37 Set A/D encoding result=40 10:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:37 Set channel filter=0.000000e+000 result=40 10:54:37 Config A/D Result=40 10:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:37 Get A/D filter: -9.255963e+061 result=40 10:54:37 Get A/D value=-858993460 result=40 10:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:37 Parameters OK 10:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:37 Set A/D data flow result=40 10:54:37 Set A/D channel type result=40 10:54:37 Set A/D encoding result=40 10:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:37 Set channel filter=0.000000e+000 result=40 10:54:37 Config A/D Result=40 10:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:37 Get A/D filter: -9.255963e+061 result=40 10:54:37 Get A/D value=-858993460 result=40 10:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:37 Aux= 10:54:37 Message to Camera, serial 140263 queued 10:55:13 Received message from Master: op=PointingHead serial=140276 10:55:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:55:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:55:14 Point started: ret=0 10:55:14 point_skyscan result=0 10:55:14 Check angles 10:55:14 SkyScan query 10:55:15 SkyScan query done: ret=0 az=109.32<-7288 ze=38.49<-9434 Statuses=0009 0008 10:55:15 Msec=0 True Az=109.32 Ze=38.49 Az status=0009 Ze status=0008 10:55:15 Check angles 10:55:15 SkyScan query 10:55:16 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 10:55:16 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 10:55:16 Check angles 10:55:16 SkyScan query 10:55:17 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 10:55:17 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 10:55:17 Check angles 10:55:17 SkyScan query 10:55:17 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 10:55:17 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 10:55:17 Check angles 10:55:17 SkyScan query 10:55:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:55:18 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:55:18 Check angles 10:55:18 SkyScan query 10:55:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:55:19 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:55:19 Message to Master queued w/err=0: serial=140276 error=0 10:55:24 Received message from Master: op=Filter serial=140277 10:55:24 Color wheel filter change from 0 to 0 10:55:24 FLIGetFilterPos err=0 currentPosition=0 10:55:24 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:24 Filter is already there-color wheel unchanged 10:55:24 Received message from Master: op=Shutter serial=140278 10:55:24 Shutter LASER close 10:55:24 Received message from Camera: op=State serial=140280 10:55:24 GetSingleValue result=40 Value=cccccccc 10:55:24 SkyScan query 10:55:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:55:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:25 Parameters OK 10:55:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:25 Set A/D data flow result=40 10:55:25 Set A/D channel type result=40 10:55:25 Set A/D encoding result=40 10:55:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:25 Set channel filter=0.000000e+000 result=40 10:55:25 Config A/D Result=40 10:55:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:25 Get A/D filter: -9.255963e+061 result=40 10:55:25 Get A/D value=-858993460 result=40 10:55:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:25 Parameters OK 10:55:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:25 Set A/D data flow result=40 10:55:25 Set A/D channel type result=40 10:55:25 Set A/D encoding result=40 10:55:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:25 Set channel filter=0.000000e+000 result=40 10:55:25 Config A/D Result=40 10:55:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:25 Get A/D filter: -9.255963e+061 result=40 10:55:25 Get A/D value=-858993460 result=40 10:55:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:25 Aux= 10:55:25 Message to Camera, serial 140280 queued [UTC 2018-12-14 10:55:52] 10:56:01 Received message from Master: op=PointingHead serial=140293 10:56:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:56:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:56:02 Point started: ret=0 10:56:02 point_skyscan result=0 10:56:03 Check angles 10:56:03 SkyScan query 10:56:03 SkyScan query done: ret=0 az=152.925<-10195 ze=8.655<-11423 Statuses=0009 0009 10:56:03 Msec=0 True Az=152.925 Ze=8.655 Az status=0009 Ze status=0009 10:56:03 Check angles 10:56:03 SkyScan query 10:56:04 SkyScan query done: ret=0 az=135.585<-9039 ze=-12.285<-12819 Statuses=0009 0009 10:56:04 Msec=750 True Az=135.585 Ze=-12.285 Az status=0009 Ze status=0009 10:56:04 Check angles 10:56:04 SkyScan query 10:56:05 SkyScan query done: ret=0 az=118.05<-7870 ze=-33.24<-14216 Statuses=0009 0009 10:56:05 Msec=1500 True Az=118.05 Ze=-33.24 Az status=0009 Ze status=0009 10:56:05 Check angles 10:56:05 SkyScan query 10:56:05 SkyScan query done: ret=0 az=100.635<-6709 ze=-51.54<-15436 Statuses=0009 0009 10:56:05 Msec=2250 True Az=100.635 Ze=-51.54 Az status=0009 Ze status=0009 10:56:06 Check angles 10:56:06 SkyScan query 10:56:06 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 10:56:06 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 10:56:06 Check angles 10:56:06 SkyScan query 10:56:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:56:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:56:07 Message to Master queued w/err=0: serial=140293 error=0 10:56:12 Received message from Master: op=Filter serial=140294 10:56:12 Color wheel filter change from 0 to 0 10:56:12 FLIGetFilterPos err=0 currentPosition=0 10:56:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:12 Filter is already there-color wheel unchanged 10:56:12 Received message from Master: op=Shutter serial=140295 10:56:12 Shutter LASER close 10:56:12 Received message from Camera: op=State serial=140297 10:56:12 GetSingleValue result=40 Value=cccccccc 10:56:12 SkyScan query 10:56:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:56:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:13 Parameters OK 10:56:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:13 Set A/D data flow result=40 10:56:13 Set A/D channel type result=40 10:56:13 Set A/D encoding result=40 10:56:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:13 Set channel filter=0.000000e+000 result=40 10:56:13 Config A/D Result=40 10:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:13 Get A/D filter: -9.255963e+061 result=40 10:56:13 Get A/D value=-858993460 result=40 10:56:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:13 Parameters OK 10:56:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:13 Set A/D data flow result=40 10:56:13 Set A/D channel type result=40 10:56:13 Set A/D encoding result=40 10:56:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:13 Set channel filter=0.000000e+000 result=40 10:56:13 Config A/D Result=40 10:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:13 Get A/D filter: -9.255963e+061 result=40 10:56:13 Get A/D value=-858993460 result=40 10:56:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:13 Aux= 10:56:13 Message to Camera, serial 140297 queued 10:56:49 Received message from Master: op=PointingHead serial=140310 10:56:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:56:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:56:50 Point started: ret=0 10:56:50 point_skyscan result=0 10:56:51 Check angles 10:56:51 SkyScan query 10:56:51 SkyScan query done: ret=0 az=109.32<-7288 ze=-81.585<-17439 Statuses=0009 0009 10:56:51 Msec=0 True Az=109.32 Ze=-81.585 Az status=0009 Ze status=0009 10:56:51 Check angles 10:56:51 SkyScan query 10:56:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.975<-18865 Statuses=0008 0009 10:56:52 Msec=750 True Az=112.995 Ze=-102.975 Az status=0008 Ze status=0009 10:56:52 Check angles 10:56:52 SkyScan query 10:56:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.065<-20271 Statuses=0008 0009 10:56:53 Msec=1500 True Az=112.995 Ze=-124.065 Az status=0008 Ze status=0009 10:56:53 Check angles 10:56:53 SkyScan query 10:56:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 10:56:53 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 10:56:54 Check angles 10:56:54 SkyScan query 10:56:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.78<-23052 Statuses=0008 0009 10:56:54 Msec=3000 True Az=112.995 Ze=-165.78 Az status=0008 Ze status=0009 10:56:54 Check angles 10:56:54 SkyScan query 10:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:56:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:56:55 Message to Master queued w/err=0: serial=140310 error=0 10:57:00 Received message from Master: op=Filter serial=140311 10:57:00 Color wheel filter change from 0 to 0 10:57:00 FLIGetFilterPos err=0 currentPosition=0 10:57:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:00 Filter is already there-color wheel unchanged 10:57:00 Received message from Master: op=Shutter serial=140312 10:57:00 Shutter LASER open 10:57:00 Received message from Camera: op=State serial=140314 10:57:00 GetSingleValue result=40 Value=cccccccc 10:57:00 SkyScan query 10:57:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:57:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:01 Parameters OK 10:57:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:01 Set A/D data flow result=40 10:57:01 Set A/D channel type result=40 10:57:01 Set A/D encoding result=40 10:57:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:01 Set channel filter=0.000000e+000 result=40 10:57:01 Config A/D Result=40 10:57:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:01 Get A/D filter: -9.255963e+061 result=40 10:57:01 Get A/D value=-858993460 result=40 10:57:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:01 Parameters OK 10:57:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:01 Set A/D data flow result=40 10:57:01 Set A/D channel type result=40 10:57:01 Set A/D encoding result=40 10:57:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:01 Set channel filter=0.000000e+000 result=40 10:57:01 Config A/D Result=40 10:57:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:01 Get A/D filter: -9.255963e+061 result=40 10:57:01 Get A/D value=-858993460 result=40 10:57:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:01 Aux= 10:57:01 Message to Camera, serial 140314 queued 10:57:09 Received message from Master: op=Shutter serial=140324 10:57:09 Shutter LASER close 10:57:10 Received message from Master: op=PointingHead serial=140328 10:57:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:57:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:57:10 Point started: ret=0 10:57:10 point_skyscan result=0 10:57:11 Check angles 10:57:11 SkyScan query 10:57:11 SkyScan query done: ret=0 az=90.21<-6014 ze=157.575<-1495 Statuses=0009 0009 10:57:11 Msec=0 True Az=90.21 Ze=157.575 Az status=0009 Ze status=0009 10:57:12 Check angles 10:57:12 SkyScan query 10:57:12 SkyScan query done: ret=0 az=72.705<-4847 ze=136.59<-2894 Statuses=0009 0009 10:57:12 Msec=750 True Az=72.705 Ze=136.59 Az status=0009 Ze status=0009 10:57:12 Check angles 10:57:12 SkyScan query 10:57:13 SkyScan query done: ret=0 az=54.915<-3661 ze=115.23<-4318 Statuses=0009 0009 10:57:13 Msec=1500 True Az=54.915 Ze=115.23 Az status=0009 Ze status=0009 10:57:13 Check angles 10:57:13 SkyScan query 10:57:14 SkyScan query done: ret=0 az=40.98<-2732 ze=93.795<-5747 Statuses=0009 0009 10:57:14 Msec=2250 True Az=40.98 Ze=93.795 Az status=0009 Ze status=0009 10:57:14 Check angles 10:57:14 SkyScan query 10:57:14 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 10:57:14 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 10:57:15 Check angles 10:57:15 SkyScan query 10:57:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.23<-8518 Statuses=0008 0009 10:57:15 Msec=3750 True Az=40.995 Ze=52.23 Az status=0008 Ze status=0009 10:57:15 Check angles 10:57:15 SkyScan query 10:57:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:57:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:57:16 Message to Master queued w/err=0: serial=140328 error=0 10:57:21 Received message from Master: op=Filter serial=140329 10:57:21 Color wheel filter change from 0 to 0 10:57:21 FLIGetFilterPos err=0 currentPosition=0 10:57:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:21 Filter is already there-color wheel unchanged 10:57:21 Received message from Master: op=Shutter serial=140330 10:57:21 Shutter LASER close 10:57:21 Received message from Camera: op=State serial=140332 10:57:21 GetSingleValue result=40 Value=cccccccc 10:57:21 SkyScan query 10:57:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:57:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:22 Parameters OK 10:57:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:22 Set A/D data flow result=40 10:57:22 Set A/D channel type result=40 10:57:22 Set A/D encoding result=40 10:57:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:22 Set channel filter=0.000000e+000 result=40 10:57:22 Config A/D Result=40 10:57:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:22 Get A/D filter: -9.255963e+061 result=40 10:57:22 Get A/D value=-858993460 result=40 10:57:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:22 Parameters OK 10:57:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:22 Set A/D data flow result=40 10:57:22 Set A/D channel type result=40 10:57:22 Set A/D encoding result=40 10:57:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:22 Set channel filter=0.000000e+000 result=40 10:57:22 Config A/D Result=40 10:57:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:22 Get A/D filter: -9.255963e+061 result=40 10:57:22 Get A/D value=-858993460 result=40 10:57:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:22 Aux= 10:57:22 Message to Camera, serial 140332 queued 10:57:59 Received message from Master: op=PointingHead serial=140345 10:57:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:57:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:57:59 Point started: ret=0 10:57:59 point_skyscan result=0 10:58:00 Check angles 10:58:00 SkyScan query 10:58:00 SkyScan query done: ret=0 az=64.185<-4279 ze=66.54<-7564 Statuses=0009 0008 10:58:00 Msec=0 True Az=64.185 Ze=66.54 Az status=0009 Ze status=0008 10:58:01 Check angles 10:58:01 SkyScan query 10:58:01 SkyScan query done: ret=0 az=81.75<-5450 ze=66.51<-7566 Statuses=0009 0008 10:58:01 Msec=750 True Az=81.75 Ze=66.51 Az status=0009 Ze status=0008 10:58:01 Check angles 10:58:01 SkyScan query 10:58:02 SkyScan query done: ret=0 az=99.51<-6634 ze=66.495<-7567 Statuses=0009 0008 10:58:02 Msec=1500 True Az=99.51 Ze=66.495 Az status=0009 Ze status=0008 10:58:02 Check angles 10:58:02 SkyScan query 10:58:03 SkyScan query done: ret=0 az=117.045<-7803 ze=66.495<-7567 Statuses=0009 0008 10:58:03 Msec=2250 True Az=117.045 Ze=66.495 Az status=0009 Ze status=0008 10:58:03 Check angles 10:58:03 SkyScan query 10:58:03 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 10:58:03 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 10:58:04 Check angles 10:58:04 SkyScan query 10:58:04 SkyScan query done: ret=0 az=152.325<-10155 ze=66.495<-7567 Statuses=0009 0008 10:58:04 Msec=3750 True Az=152.325 Ze=66.495 Az status=0009 Ze status=0008 10:58:04 Check angles 10:58:04 SkyScan query 10:58:05 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:58:05 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:58:05 Message to Master queued w/err=0: serial=140345 error=0 10:58:10 Received message from Master: op=Filter serial=140346 10:58:10 Color wheel filter change from 0 to 0 10:58:10 FLIGetFilterPos err=0 currentPosition=0 10:58:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:10 Filter is already there-color wheel unchanged 10:58:10 Received message from Master: op=Shutter serial=140347 10:58:10 Shutter LASER close 10:58:10 Received message from Camera: op=State serial=140349 10:58:10 GetSingleValue result=40 Value=cccccccc 10:58:10 SkyScan query 10:58:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:58:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:11 Parameters OK 10:58:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:11 Set A/D data flow result=40 10:58:11 Set A/D channel type result=40 10:58:11 Set A/D encoding result=40 10:58:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:11 Set channel filter=0.000000e+000 result=40 10:58:11 Config A/D Result=40 10:58:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:11 Get A/D filter: -9.255963e+061 result=40 10:58:11 Get A/D value=-858993460 result=40 10:58:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:11 Parameters OK 10:58:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:11 Set A/D data flow result=40 10:58:11 Set A/D channel type result=40 10:58:11 Set A/D encoding result=40 10:58:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:11 Set channel filter=0.000000e+000 result=40 10:58:11 Config A/D Result=40 10:58:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:11 Get A/D filter: -9.255963e+061 result=40 10:58:11 Get A/D value=-858993460 result=40 10:58:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:11 Aux= 10:58:11 Message to Camera, serial 140349 queued 10:58:48 Received message from Master: op=PointingHead serial=140362 10:58:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:58:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:58:48 Point started: ret=0 10:58:48 point_skyscan result=0 10:58:49 Check angles 10:58:49 SkyScan query 10:58:49 SkyScan query done: ret=0 az=134.565<-8971 ze=36.18<-9588 Statuses=0009 0009 10:58:49 Msec=0 True Az=134.565 Ze=36.18 Az status=0009 Ze status=0009 10:58:49 Check angles 10:58:49 SkyScan query 10:58:50 SkyScan query done: ret=0 az=116.655<-7777 ze=14.745<-11017 Statuses=0009 0009 10:58:50 Msec=750 True Az=116.655 Ze=14.745 Az status=0009 Ze status=0009 10:58:50 Check angles 10:58:50 SkyScan query 10:58:51 SkyScan query done: ret=0 az=99.315<-6621 ze=-6.195<-12413 Statuses=0009 0009 10:58:51 Msec=1500 True Az=99.315 Ze=-6.195 Az status=0009 Ze status=0009 10:58:51 Check angles 10:58:51 SkyScan query 10:58:52 SkyScan query done: ret=0 az=81.765<-5451 ze=-27.165<-13811 Statuses=0009 0009 10:58:52 Msec=2250 True Az=81.765 Ze=-27.165 Az status=0009 Ze status=0009 10:58:52 Check angles 10:58:52 SkyScan query 10:58:52 SkyScan query done: ret=0 az=63.975<-4265 ze=-38.58<-14572 Statuses=0009 0008 10:58:52 Msec=3000 True Az=63.975 Ze=-38.58 Az status=0009 Ze status=0008 10:58:53 Check angles 10:58:53 SkyScan query 10:58:53 SkyScan query done: ret=0 az=46.185<-3079 ze=-38.52<-14568 Statuses=0009 0008 10:58:53 Msec=3750 True Az=46.185 Ze=-38.52 Az status=0009 Ze status=0008 10:58:53 Check angles 10:58:53 SkyScan query 10:58:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:58:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:58:54 Message to Master queued w/err=0: serial=140362 error=0 10:58:59 Received message from Master: op=Filter serial=140363 10:58:59 Color wheel filter change from 0 to 0 10:58:59 FLIGetFilterPos err=0 currentPosition=0 10:58:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:59 Filter is already there-color wheel unchanged 10:58:59 Received message from Master: op=Shutter serial=140364 10:58:59 Shutter LASER close 10:58:59 Received message from Camera: op=State serial=140366 10:58:59 GetSingleValue result=40 Value=cccccccc 10:58:59 SkyScan query 10:59:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:59:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:00 Parameters OK 10:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:00 Set A/D data flow result=40 10:59:00 Set A/D channel type result=40 10:59:00 Set A/D encoding result=40 10:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:00 Set channel filter=0.000000e+000 result=40 10:59:00 Config A/D Result=40 10:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:00 Get A/D filter: -9.255963e+061 result=40 10:59:00 Get A/D value=-858993460 result=40 10:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:00 Parameters OK 10:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:00 Set A/D data flow result=40 10:59:00 Set A/D channel type result=40 10:59:00 Set A/D encoding result=40 10:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:00 Set channel filter=0.000000e+000 result=40 10:59:00 Config A/D Result=40 10:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:00 Get A/D filter: -9.255963e+061 result=40 10:59:00 Get A/D value=-858993460 result=40 10:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:00 Aux= 10:59:00 Message to Camera, serial 140366 queued 10:59:36 Received message from Master: op=PointingHead serial=140379 10:59:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:59:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:59:37 Point started: ret=0 10:59:37 point_skyscan result=0 10:59:38 Check angles 10:59:38 SkyScan query 10:59:38 SkyScan query done: ret=0 az=64.155<-4277 ze=-68.595<-16573 Statuses=0009 0009 10:59:38 Msec=0 True Az=64.155 Ze=-68.595 Az status=0009 Ze status=0009 10:59:38 Check angles 10:59:38 SkyScan query 10:59:39 SkyScan query done: ret=0 az=81.69<-5446 ze=-89.565<-17971 Statuses=0009 0009 10:59:39 Msec=750 True Az=81.69 Ze=-89.565 Az status=0009 Ze status=0009 10:59:39 Check angles 10:59:39 SkyScan query 10:59:40 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.505<-19367 Statuses=0009 0009 10:59:40 Msec=1500 True Az=99.165 Ze=-110.505 Az status=0009 Ze status=0009 10:59:40 Check angles 10:59:40 SkyScan query 10:59:40 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.865<-20791 Statuses=0009 0009 10:59:40 Msec=2250 True Az=117.045 Ze=-131.865 Az status=0009 Ze status=0009 10:59:41 Check angles 10:59:41 SkyScan query 10:59:41 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 10:59:41 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 10:59:41 Check angles 10:59:41 SkyScan query 10:59:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 10:59:42 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 10:59:42 Message to Master queued w/err=0: serial=140379 error=0 10:59:47 Received message from Master: op=Filter serial=140380 10:59:47 Color wheel filter change from 0 to 0 10:59:47 FLIGetFilterPos err=0 currentPosition=0 10:59:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:47 Filter is already there-color wheel unchanged 10:59:47 Received message from Master: op=Shutter serial=140381 10:59:47 Shutter LASER close 10:59:47 Received message from Camera: op=State serial=140383 10:59:47 GetSingleValue result=40 Value=cccccccc 10:59:47 SkyScan query 10:59:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:59:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:48 Parameters OK 10:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:48 Set A/D data flow result=40 10:59:48 Set A/D channel type result=40 10:59:48 Set A/D encoding result=40 10:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:48 Set channel filter=0.000000e+000 result=40 10:59:48 Config A/D Result=40 10:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:48 Get A/D filter: -9.255963e+061 result=40 10:59:48 Get A/D value=-858993460 result=40 10:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:48 Parameters OK 10:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:48 Set A/D data flow result=40 10:59:48 Set A/D channel type result=40 10:59:48 Set A/D encoding result=40 10:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:48 Set channel filter=0.000000e+000 result=40 10:59:48 Config A/D Result=40 10:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:48 Get A/D filter: -9.255963e+061 result=40 10:59:48 Get A/D value=-858993460 result=40 10:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:48 Aux= 10:59:48 Message to Camera, serial 140383 queued 11:00:25 Received message from Master: op=PointingHead serial=140396 11:00:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:00:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:00:25 Point started: ret=0 11:00:25 point_skyscan result=0 11:00:26 Check angles 11:00:26 SkyScan query 11:00:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 11:00:26 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 11:00:26 Check angles 11:00:26 SkyScan query 11:00:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:00:27 Msec=750 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 11:00:27 Message to Master queued w/err=0: serial=140396 error=0 11:00:32 Received message from Master: op=Filter serial=140397 11:00:32 Color wheel filter change from 0 to 0 11:00:32 FLIGetFilterPos err=0 currentPosition=0 11:00:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:32 Filter is already there-color wheel unchanged 11:00:32 Received message from Master: op=Shutter serial=140398 11:00:32 Shutter LASER open 11:00:32 Received message from Camera: op=State serial=140400 11:00:32 GetSingleValue result=40 Value=cccccccc 11:00:32 SkyScan query 11:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.98<-23532 Statuses=0008 0008 11:00:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:33 Parameters OK 11:00:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:33 Set A/D data flow result=40 11:00:33 Set A/D channel type result=40 11:00:33 Set A/D encoding result=40 11:00:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:33 Set channel filter=0.000000e+000 result=40 11:00:33 Config A/D Result=40 11:00:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:33 Get A/D filter: -9.255963e+061 result=40 11:00:33 Get A/D value=-858993460 result=40 11:00:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:33 Parameters OK 11:00:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:33 Set A/D data flow result=40 11:00:33 Set A/D channel type result=40 11:00:33 Set A/D encoding result=40 11:00:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:33 Set channel filter=0.000000e+000 result=40 11:00:33 Config A/D Result=40 11:00:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:33 Get A/D filter: -9.255963e+061 result=40 11:00:33 Get A/D value=-858993460 result=40 11:00:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.979996 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:33 Aux= 11:00:33 Message to Camera, serial 140400 queued 11:00:41 Received message from Master: op=Shutter serial=140410 11:00:41 Shutter LASER close 11:00:42 Received message from Master: op=PointingHead serial=140414 11:00:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:00:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:00:42 Point started: ret=0 11:00:42 point_skyscan result=0 11:00:43 Check angles 11:00:43 SkyScan query 11:00:44 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.58<-21572 Statuses=0009 0009 11:00:44 Msec=0 True Az=135.705 Ze=-143.58 Az status=0009 Ze status=0009 11:00:44 Check angles 11:00:44 SkyScan query 11:00:44 SkyScan query done: ret=0 az=153.195<-10213 ze=-122.55<-20170 Statuses=0009 0009 11:00:44 Msec=750 True Az=153.195 Ze=-122.55 Az status=0009 Ze status=0009 11:00:45 Check angles 11:00:45 SkyScan query 11:00:45 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.7<-18780 Statuses=0009 0009 11:00:45 Msec=1500 True Az=170.76 Ze=-101.7 Az status=0009 Ze status=0009 11:00:45 Check angles 11:00:45 SkyScan query 11:00:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.64<-17376 Statuses=0008 0009 11:00:46 Msec=2250 True Az=176.01 Ze=-80.64 Az status=0008 Ze status=0009 11:00:46 Check angles 11:00:46 SkyScan query 11:00:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.73<-15982 Statuses=0008 0009 11:00:47 Msec=3000 True Az=176.01 Ze=-59.73 Az status=0008 Ze status=0009 11:00:47 Check angles 11:00:47 SkyScan query 11:00:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:00:47 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:00:47 Message to Master queued w/err=0: serial=140414 error=0 11:00:52 Received message from Master: op=Filter serial=140415 11:00:52 Color wheel filter change from 0 to 0 11:00:52 FLIGetFilterPos err=0 currentPosition=0 11:00:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:52 Filter is already there-color wheel unchanged 11:00:53 Received message from Master: op=Shutter serial=140416 11:00:53 Shutter LASER close 11:00:53 Received message from Camera: op=State serial=140418 11:00:53 GetSingleValue result=40 Value=cccccccc 11:00:53 SkyScan query 11:00:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:00:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:53 Parameters OK 11:00:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:53 Set A/D data flow result=40 11:00:53 Set A/D channel type result=40 11:00:53 Set A/D encoding result=40 11:00:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:53 Set channel filter=0.000000e+000 result=40 11:00:53 Config A/D Result=40 11:00:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:53 Get A/D filter: -9.255963e+061 result=40 11:00:53 Get A/D value=-858993460 result=40 11:00:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:53 Parameters OK 11:00:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:53 Set A/D data flow result=40 11:00:53 Set A/D channel type result=40 11:00:53 Set A/D encoding result=40 11:00:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:53 Set channel filter=0.000000e+000 result=40 11:00:53 Config A/D Result=40 11:00:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:53 Get A/D filter: -9.255963e+061 result=40 11:00:53 Get A/D value=-858993460 result=40 11:00:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:53 Aux= 11:00:53 Message to Camera, serial 140418 queued 11:01:30 Received message from Master: op=PointingHead serial=140431 11:01:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:01:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:01:31 Point started: ret=0 11:01:31 point_skyscan result=0 11:01:31 Check angles 11:01:31 SkyScan query 11:01:32 SkyScan query done: ret=0 az=152.43<-10162 ze=-21.165<-13411 Statuses=0009 0009 11:01:32 Msec=0 True Az=152.43 Ze=-21.165 Az status=0009 Ze status=0009 11:01:32 Check angles 11:01:32 SkyScan query 11:01:33 SkyScan query done: ret=0 az=134.865<-8991 ze=-0.255<-12017 Statuses=0009 0009 11:01:33 Msec=750 True Az=134.865 Ze=-0.255 Az status=0009 Ze status=0009 11:01:33 Check angles 11:01:33 SkyScan query 11:01:33 SkyScan query done: ret=0 az=117.465<-7831 ze=20.7<-10620 Statuses=0009 0009 11:01:33 Msec=1500 True Az=117.465 Ze=20.7 Az status=0009 Ze status=0009 11:01:34 Check angles 11:01:34 SkyScan query 11:01:34 SkyScan query done: ret=0 az=99.69<-6646 ze=42.075<-9195 Statuses=0009 0009 11:01:34 Msec=2250 True Az=99.69 Ze=42.075 Az status=0009 Ze status=0009 11:01:34 Check angles 11:01:34 SkyScan query 11:01:35 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 11:01:35 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 11:01:35 Check angles 11:01:35 SkyScan query 11:01:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:01:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:01:36 Message to Master queued w/err=0: serial=140431 error=0 11:01:41 Received message from Master: op=Filter serial=140432 11:01:41 Color wheel filter change from 0 to 0 11:01:41 FLIGetFilterPos err=0 currentPosition=0 11:01:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:41 Filter is already there-color wheel unchanged 11:01:41 Received message from Master: op=Shutter serial=140433 11:01:41 Shutter LASER close 11:01:41 Received message from Camera: op=State serial=140435 11:01:41 GetSingleValue result=40 Value=cccccccc 11:01:41 SkyScan query 11:01:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:01:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:41 Parameters OK 11:01:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:41 Set A/D data flow result=40 11:01:41 Set A/D channel type result=40 11:01:41 Set A/D encoding result=40 11:01:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:41 Set channel filter=0.000000e+000 result=40 11:01:41 Config A/D Result=40 11:01:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:41 Get A/D filter: -9.255963e+061 result=40 11:01:41 Get A/D value=-858993460 result=40 11:01:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:41 Parameters OK 11:01:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:41 Set A/D data flow result=40 11:01:41 Set A/D channel type result=40 11:01:41 Set A/D encoding result=40 11:01:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:41 Set channel filter=0.000000e+000 result=40 11:01:41 Config A/D Result=40 11:01:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:41 Get A/D filter: -9.255963e+061 result=40 11:01:41 Get A/D value=-858993460 result=40 11:01:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:41 Aux= 11:01:41 Message to Camera, serial 140435 queued 11:02:18 Received message from Master: op=PointingHead serial=140448 11:02:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:02:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:02:19 Point started: ret=0 11:02:19 point_skyscan result=0 11:02:19 Check angles 11:02:19 SkyScan query 11:02:20 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 11:02:20 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 11:02:20 Check angles 11:02:20 SkyScan query 11:02:21 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 11:02:21 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 11:02:21 Check angles 11:02:21 SkyScan query 11:02:22 SkyScan query done: ret=0 az=144.375<-9625 ze=38.505<-9433 Statuses=0009 0008 11:02:22 Msec=1500 True Az=144.375 Ze=38.505 Az status=0009 Ze status=0008 11:02:22 Check angles 11:02:22 SkyScan query 11:02:22 SkyScan query done: ret=0 az=161.715<-10781 ze=38.505<-9433 Statuses=0009 0008 11:02:22 Msec=2250 True Az=161.715 Ze=38.505 Az status=0009 Ze status=0008 11:02:22 Check angles 11:02:22 SkyScan query 11:02:23 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:02:23 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:02:23 Check angles 11:02:23 SkyScan query 11:02:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:02:24 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:02:24 Message to Master queued w/err=0: serial=140448 error=0 11:02:29 Received message from Master: op=Filter serial=140449 11:02:29 Color wheel filter change from 0 to 0 11:02:29 FLIGetFilterPos err=0 currentPosition=0 11:02:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:29 Filter is already there-color wheel unchanged 11:02:29 Received message from Master: op=Shutter serial=140450 11:02:29 Shutter LASER close 11:02:29 Received message from Camera: op=State serial=140452 11:02:29 GetSingleValue result=40 Value=cccccccc 11:02:29 SkyScan query 11:02:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:02:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:30 Parameters OK 11:02:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:30 Set A/D data flow result=40 11:02:30 Set A/D channel type result=40 11:02:30 Set A/D encoding result=40 11:02:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:30 Set channel filter=0.000000e+000 result=40 11:02:30 Config A/D Result=40 11:02:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:30 Get A/D filter: -9.255963e+061 result=40 11:02:30 Get A/D value=-858993460 result=40 11:02:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:30 Parameters OK 11:02:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:30 Set A/D data flow result=40 11:02:30 Set A/D channel type result=40 11:02:30 Set A/D encoding result=40 11:02:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:30 Set channel filter=0.000000e+000 result=40 11:02:30 Config A/D Result=40 11:02:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:30 Get A/D filter: -9.255963e+061 result=40 11:02:30 Get A/D value=-858993460 result=40 11:02:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:30 Aux= 11:02:30 Message to Camera, serial 140452 queued 11:03:06 Received message from Master: op=PointingHead serial=140465 11:03:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:03:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:03:07 Point started: ret=0 11:03:07 point_skyscan result=0 11:03:08 Check angles 11:03:08 SkyScan query 11:03:08 SkyScan query done: ret=0 az=152.685<-10179 ze=8.13<-11458 Statuses=0009 0009 11:03:08 Msec=0 True Az=152.685 Ze=8.13 Az status=0009 Ze status=0009 11:03:08 Check angles 11:03:08 SkyScan query 11:03:09 SkyScan query done: ret=0 az=135.09<-9006 ze=-12.735<-12849 Statuses=0009 0009 11:03:09 Msec=750 True Az=135.09 Ze=-12.735 Az status=0009 Ze status=0009 11:03:09 Check angles 11:03:09 SkyScan query 11:03:10 SkyScan query done: ret=0 az=117.27<-7818 ze=-34.2<-14280 Statuses=0009 0009 11:03:10 Msec=1500 True Az=117.27 Ze=-34.2 Az status=0009 Ze status=0009 11:03:10 Check angles 11:03:10 SkyScan query 11:03:10 SkyScan query done: ret=0 az=99.75<-6650 ze=-51.585<-15439 Statuses=0009 0009 11:03:10 Msec=2250 True Az=99.75 Ze=-51.585 Az status=0009 Ze status=0009 11:03:11 Check angles 11:03:11 SkyScan query 11:03:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 11:03:11 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 11:03:11 Check angles 11:03:11 SkyScan query 11:03:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:03:12 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:03:12 Message to Master queued w/err=0: serial=140465 error=0 11:03:17 Received message from Master: op=Filter serial=140466 11:03:17 Color wheel filter change from 0 to 0 11:03:17 FLIGetFilterPos err=0 currentPosition=0 11:03:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:17 Filter is already there-color wheel unchanged 11:03:17 Received message from Master: op=Shutter serial=140467 11:03:17 Shutter LASER close 11:03:17 Received message from Camera: op=State serial=140469 11:03:17 GetSingleValue result=40 Value=cccccccc 11:03:17 SkyScan query 11:03:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:03:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:18 Parameters OK 11:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:18 Set A/D data flow result=40 11:03:18 Set A/D channel type result=40 11:03:18 Set A/D encoding result=40 11:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:18 Set channel filter=0.000000e+000 result=40 11:03:18 Config A/D Result=40 11:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:18 Get A/D filter: -9.255963e+061 result=40 11:03:18 Get A/D value=-858993460 result=40 11:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:18 Parameters OK 11:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:18 Set A/D data flow result=40 11:03:18 Set A/D channel type result=40 11:03:18 Set A/D encoding result=40 11:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:18 Set channel filter=0.000000e+000 result=40 11:03:18 Config A/D Result=40 11:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:18 Get A/D filter: -9.255963e+061 result=40 11:03:18 Get A/D value=-858993460 result=40 11:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:18 Aux= 11:03:18 Message to Camera, serial 140469 queued 11:03:54 Received message from Master: op=PointingHead serial=140482 11:03:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:03:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:03:55 Point started: ret=0 11:03:55 point_skyscan result=0 11:03:56 Check angles 11:03:56 SkyScan query 11:03:56 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.045<-17403 Statuses=0009 0009 11:03:56 Msec=0 True Az=108.9 Ze=-81.045 Az status=0009 Ze status=0009 11:03:56 Check angles 11:03:56 SkyScan query 11:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 11:03:57 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 11:03:57 Check angles 11:03:57 SkyScan query 11:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 11:03:58 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 11:03:58 Check angles 11:03:58 SkyScan query 11:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.765<-21651 Statuses=0008 0009 11:03:58 Msec=2250 True Az=112.995 Ze=-144.765 Az status=0008 Ze status=0009 11:03:59 Check angles 11:03:59 SkyScan query 11:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.735<-23049 Statuses=0008 0009 11:03:59 Msec=3000 True Az=112.995 Ze=-165.735 Az status=0008 Ze status=0009 11:03:59 Check angles 11:03:59 SkyScan query 11:04:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:04:00 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:04:00 Message to Master queued w/err=0: serial=140482 error=0 11:04:05 Received message from Master: op=Filter serial=140483 11:04:05 Color wheel filter change from 0 to 0 11:04:05 FLIGetFilterPos err=0 currentPosition=0 11:04:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:05 Filter is already there-color wheel unchanged 11:04:05 Received message from Master: op=Shutter serial=140484 11:04:05 Shutter LASER open 11:04:05 Received message from Camera: op=State serial=140486 11:04:05 GetSingleValue result=40 Value=cccccccc 11:04:05 SkyScan query 11:04:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:04:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:06 Parameters OK 11:04:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:06 Set A/D data flow result=40 11:04:06 Set A/D channel type result=40 11:04:06 Set A/D encoding result=40 11:04:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:06 Set channel filter=0.000000e+000 result=40 11:04:06 Config A/D Result=40 11:04:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:06 Get A/D filter: -9.255963e+061 result=40 11:04:06 Get A/D value=-858993460 result=40 11:04:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:06 Parameters OK 11:04:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:06 Set A/D data flow result=40 11:04:06 Set A/D channel type result=40 11:04:06 Set A/D encoding result=40 11:04:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:06 Set channel filter=0.000000e+000 result=40 11:04:06 Config A/D Result=40 11:04:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:06 Get A/D filter: -9.255963e+061 result=40 11:04:06 Get A/D value=-858993460 result=40 11:04:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:06 Aux= 11:04:06 Message to Camera, serial 140486 queued 11:04:14 Received message from Master: op=Shutter serial=140496 11:04:14 Shutter LASER close 11:04:15 Received message from Master: op=PointingHead serial=140500 11:04:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:04:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:04:15 Point started: ret=0 11:04:15 point_skyscan result=0 11:04:16 Check angles 11:04:16 SkyScan query 11:04:16 SkyScan query done: ret=0 az=90.21<-6014 ze=157.53<-1498 Statuses=0009 0009 11:04:16 Msec=0 True Az=90.21 Ze=157.53 Az status=0009 Ze status=0009 11:04:17 Check angles 11:04:17 SkyScan query 11:04:17 SkyScan query done: ret=0 az=72.705<-4847 ze=136.545<-2897 Statuses=0009 0009 11:04:17 Msec=750 True Az=72.705 Ze=136.545 Az status=0009 Ze status=0009 11:04:17 Check angles 11:04:17 SkyScan query 11:04:18 SkyScan query done: ret=0 az=55.23<-3682 ze=115.65<-4290 Statuses=0009 0009 11:04:18 Msec=1500 True Az=55.23 Ze=115.65 Az status=0009 Ze status=0009 11:04:18 Check angles 11:04:18 SkyScan query 11:04:19 SkyScan query done: ret=0 az=40.98<-2732 ze=94.545<-5697 Statuses=0009 0009 11:04:19 Msec=2250 True Az=40.98 Ze=94.545 Az status=0009 Ze status=0009 11:04:19 Check angles 11:04:19 SkyScan query 11:04:19 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 11:04:19 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 11:04:20 Check angles 11:04:20 SkyScan query 11:04:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.74<-8484 Statuses=0008 0009 11:04:20 Msec=3750 True Az=40.995 Ze=52.74 Az status=0008 Ze status=0009 11:04:20 Check angles 11:04:20 SkyScan query 11:04:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:04:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:04:21 Message to Master queued w/err=0: serial=140500 error=0 11:04:26 Received message from Master: op=Filter serial=140501 11:04:26 Color wheel filter change from 0 to 0 11:04:26 FLIGetFilterPos err=0 currentPosition=0 11:04:26 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:26 Filter is already there-color wheel unchanged 11:04:26 Received message from Master: op=Shutter serial=140502 11:04:26 Shutter LASER close 11:04:26 Received message from Camera: op=State serial=140504 11:04:26 GetSingleValue result=40 Value=cccccccc 11:04:26 SkyScan query 11:04:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:04:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:27 Parameters OK 11:04:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:27 Set A/D data flow result=40 11:04:27 Set A/D channel type result=40 11:04:27 Set A/D encoding result=40 11:04:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:27 Set channel filter=0.000000e+000 result=40 11:04:27 Config A/D Result=40 11:04:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:27 Get A/D filter: -9.255963e+061 result=40 11:04:27 Get A/D value=-858993460 result=40 11:04:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:27 Parameters OK 11:04:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:27 Set A/D data flow result=40 11:04:27 Set A/D channel type result=40 11:04:27 Set A/D encoding result=40 11:04:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:27 Set channel filter=0.000000e+000 result=40 11:04:27 Config A/D Result=40 11:04:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:27 Get A/D filter: -9.255963e+061 result=40 11:04:27 Get A/D value=-858993460 result=40 11:04:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:27 Aux= 11:04:27 Message to Camera, serial 140504 queued 11:05:04 Received message from Master: op=PointingHead serial=140517 11:05:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:05:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:05:04 Point started: ret=0 11:05:04 point_skyscan result=0 11:05:05 Check angles 11:05:05 SkyScan query 11:05:05 SkyScan query done: ret=0 az=63.93<-4262 ze=66.555<-7563 Statuses=0009 0008 11:05:05 Msec=0 True Az=63.93 Ze=66.555 Az status=0009 Ze status=0008 11:05:06 Check angles 11:05:06 SkyScan query 11:05:06 SkyScan query done: ret=0 az=81.39<-5426 ze=66.51<-7566 Statuses=0009 0008 11:05:06 Msec=750 True Az=81.39 Ze=66.51 Az status=0009 Ze status=0008 11:05:06 Check angles 11:05:06 SkyScan query 11:05:07 SkyScan query done: ret=0 az=98.895<-6593 ze=66.495<-7567 Statuses=0009 0008 11:05:07 Msec=1500 True Az=98.895 Ze=66.495 Az status=0009 Ze status=0008 11:05:07 Check angles 11:05:07 SkyScan query 11:05:08 SkyScan query done: ret=0 az=116.385<-7759 ze=66.495<-7567 Statuses=0009 0008 11:05:08 Msec=2250 True Az=116.385 Ze=66.495 Az status=0009 Ze status=0008 11:05:08 Check angles 11:05:08 SkyScan query 11:05:08 SkyScan query done: ret=0 az=133.86<-8924 ze=66.495<-7567 Statuses=0009 0008 11:05:08 Msec=3000 True Az=133.86 Ze=66.495 Az status=0009 Ze status=0008 11:05:09 Check angles 11:05:09 SkyScan query 11:05:09 SkyScan query done: ret=0 az=151.26<-10084 ze=66.495<-7567 Statuses=0009 0008 11:05:09 Msec=3750 True Az=151.26 Ze=66.495 Az status=0009 Ze status=0008 11:05:09 Check angles 11:05:09 SkyScan query 11:05:10 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:05:10 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:05:10 Message to Master queued w/err=0: serial=140517 error=0 11:05:15 Received message from Master: op=Filter serial=140518 11:05:15 Color wheel filter change from 0 to 0 11:05:15 FLIGetFilterPos err=0 currentPosition=0 11:05:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:15 Filter is already there-color wheel unchanged 11:05:15 Received message from Master: op=Shutter serial=140519 11:05:15 Shutter LASER close 11:05:15 Received message from Camera: op=State serial=140521 11:05:15 GetSingleValue result=40 Value=cccccccc 11:05:15 SkyScan query 11:05:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:05:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:16 Parameters OK 11:05:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:16 Set A/D data flow result=40 11:05:16 Set A/D channel type result=40 11:05:16 Set A/D encoding result=40 11:05:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:16 Set channel filter=0.000000e+000 result=40 11:05:16 Config A/D Result=40 11:05:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:16 Get A/D filter: -9.255963e+061 result=40 11:05:16 Get A/D value=-858993460 result=40 11:05:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:16 Parameters OK 11:05:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:16 Set A/D data flow result=40 11:05:16 Set A/D channel type result=40 11:05:16 Set A/D encoding result=40 11:05:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:16 Set channel filter=0.000000e+000 result=40 11:05:16 Config A/D Result=40 11:05:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:16 Get A/D filter: -9.255963e+061 result=40 11:05:16 Get A/D value=-858993460 result=40 [UTC 2018-12-14 11:05:16] 11:05:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:16 Aux= 11:05:16 Message to Camera, serial 140521 queued 11:05:53 Received message from Master: op=PointingHead serial=140534 11:05:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:05:53 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:05:53 Point started: ret=0 11:05:53 point_skyscan result=0 11:05:54 Check angles 11:05:54 SkyScan query 11:05:54 SkyScan query done: ret=0 az=135.195<-9013 ze=36.9<-9540 Statuses=0009 0009 11:05:54 Msec=0 True Az=135.195 Ze=36.9 Az status=0009 Ze status=0009 11:05:54 Check angles 11:05:54 SkyScan query 11:05:55 SkyScan query done: ret=0 az=117.66<-7844 ze=15.96<-10936 Statuses=0009 0009 11:05:55 Msec=750 True Az=117.66 Ze=15.96 Az status=0009 Ze status=0009 11:05:55 Check angles 11:05:55 SkyScan query 11:05:56 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.475<-12365 Statuses=0009 0009 11:05:56 Msec=1500 True Az=99.9 Ze=-5.475 Az status=0009 Ze status=0009 11:05:56 Check angles 11:05:56 SkyScan query 11:05:56 SkyScan query done: ret=0 az=82.455<-5497 ze=-26.415<-13761 Statuses=0009 0009 11:05:56 Msec=2250 True Az=82.455 Ze=-26.415 Az status=0009 Ze status=0009 11:05:57 Check angles 11:05:57 SkyScan query 11:05:57 SkyScan query done: ret=0 az=64.905<-4327 ze=-38.595<-14573 Statuses=0009 0008 11:05:57 Msec=3000 True Az=64.905 Ze=-38.595 Az status=0009 Ze status=0008 11:05:57 Check angles 11:05:57 SkyScan query 11:05:58 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.52<-14568 Statuses=0009 0008 11:05:58 Msec=3750 True Az=47.13 Ze=-38.52 Az status=0009 Ze status=0008 11:05:58 Check angles 11:05:58 SkyScan query 11:05:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:05:59 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:05:59 Message to Master queued w/err=0: serial=140534 error=0 11:06:04 Received message from Master: op=Filter serial=140535 11:06:04 Color wheel filter change from 0 to 0 11:06:04 FLIGetFilterPos err=0 currentPosition=0 11:06:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:04 Filter is already there-color wheel unchanged 11:06:04 Received message from Master: op=Shutter serial=140536 11:06:04 Shutter LASER close 11:06:04 Received message from Camera: op=State serial=140538 11:06:04 GetSingleValue result=40 Value=cccccccc 11:06:04 SkyScan query 11:06:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:06:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:05 Parameters OK 11:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:05 Set A/D data flow result=40 11:06:05 Set A/D channel type result=40 11:06:05 Set A/D encoding result=40 11:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:05 Set channel filter=0.000000e+000 result=40 11:06:05 Config A/D Result=40 11:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:05 Get A/D filter: -9.255963e+061 result=40 11:06:05 Get A/D value=-858993460 result=40 11:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:05 Parameters OK 11:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:05 Set A/D data flow result=40 11:06:05 Set A/D channel type result=40 11:06:05 Set A/D encoding result=40 11:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:05 Set channel filter=0.000000e+000 result=40 11:06:05 Config A/D Result=40 11:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:05 Get A/D filter: -9.255963e+061 result=40 11:06:05 Get A/D value=-858993460 result=40 11:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:05 Aux= 11:06:05 Message to Camera, serial 140538 queued 11:06:40 Received message from Master: op=PointingHead serial=140550 11:06:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:06:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:06:41 Point started: ret=0 11:06:41 point_skyscan result=0 11:06:42 Check angles 11:06:42 SkyScan query 11:06:42 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.415<-16561 Statuses=0009 0009 11:06:42 Msec=0 True Az=64.02 Ze=-68.415 Az status=0009 Ze status=0009 11:06:42 Check angles 11:06:42 SkyScan query 11:06:43 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.4<-17960 Statuses=0009 0009 11:06:43 Msec=750 True Az=81.6 Ze=-89.4 Az status=0009 Ze status=0009 11:06:43 Check angles 11:06:43 SkyScan query 11:06:44 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.79<-19386 Statuses=0009 0009 11:06:44 Msec=1500 True Az=99.405 Ze=-110.79 Az status=0009 Ze status=0009 11:06:44 Check angles 11:06:44 SkyScan query 11:06:44 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.685<-20779 Statuses=0009 0009 11:06:44 Msec=2250 True Az=116.82 Ze=-131.685 Az status=0009 Ze status=0009 11:06:45 Check angles 11:06:45 SkyScan query 11:06:45 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 11:06:45 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 11:06:45 Check angles 11:06:45 SkyScan query 11:06:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:06:46 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:06:46 Message to Master queued w/err=0: serial=140550 error=0 11:06:51 Received message from Master: op=Filter serial=140551 11:06:51 Color wheel filter change from 0 to 0 11:06:51 FLIGetFilterPos err=0 currentPosition=0 11:06:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:51 Filter is already there-color wheel unchanged 11:06:51 Received message from Master: op=Shutter serial=140552 11:06:51 Shutter LASER close 11:06:51 Received message from Camera: op=State serial=140554 11:06:51 GetSingleValue result=40 Value=cccccccc 11:06:51 SkyScan query 11:06:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:06:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:52 Parameters OK 11:06:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:52 Set A/D data flow result=40 11:06:52 Set A/D channel type result=40 11:06:52 Set A/D encoding result=40 11:06:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:52 Set channel filter=0.000000e+000 result=40 11:06:52 Config A/D Result=40 11:06:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:52 Get A/D filter: -9.255963e+061 result=40 11:06:52 Get A/D value=-858993460 result=40 11:06:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:52 Parameters OK 11:06:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:52 Set A/D data flow result=40 11:06:52 Set A/D channel type result=40 11:06:52 Set A/D encoding result=40 11:06:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:52 Set channel filter=0.000000e+000 result=40 11:06:52 Config A/D Result=40 11:06:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:52 Get A/D filter: -9.255963e+061 result=40 11:06:52 Get A/D value=-858993460 result=40 11:06:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:52 Aux= 11:06:52 Message to Camera, serial 140554 queued 11:07:29 Received message from Master: op=PointingHead serial=140567 11:07:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:07:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:07:29 Point started: ret=0 11:07:29 point_skyscan result=0 11:07:30 Check angles 11:07:30 SkyScan query 11:07:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 11:07:30 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 11:07:30 Check angles 11:07:30 SkyScan query 11:07:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:07:31 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:07:31 Message to Master queued w/err=0: serial=140567 error=0 11:07:36 Received message from Master: op=Filter serial=140568 11:07:36 Color wheel filter change from 0 to 0 11:07:36 FLIGetFilterPos err=0 currentPosition=0 11:07:36 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:36 Filter is already there-color wheel unchanged 11:07:36 Received message from Master: op=Shutter serial=140569 11:07:36 Shutter LASER open 11:07:36 Received message from Camera: op=State serial=140571 11:07:36 GetSingleValue result=40 Value=cccccccc 11:07:36 SkyScan query 11:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:07:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:37 Parameters OK 11:07:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:37 Set A/D data flow result=40 11:07:37 Set A/D channel type result=40 11:07:37 Set A/D encoding result=40 11:07:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:37 Set channel filter=0.000000e+000 result=40 11:07:37 Config A/D Result=40 11:07:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:37 Get A/D filter: -9.255963e+061 result=40 11:07:37 Get A/D value=-858993460 result=40 11:07:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:37 Parameters OK 11:07:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:37 Set A/D data flow result=40 11:07:37 Set A/D channel type result=40 11:07:37 Set A/D encoding result=40 11:07:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:37 Set channel filter=0.000000e+000 result=40 11:07:37 Config A/D Result=40 11:07:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:37 Get A/D filter: -9.255963e+061 result=40 11:07:37 Get A/D value=-858993460 result=40 11:07:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:37 Aux= 11:07:37 Message to Camera, serial 140571 queued 11:07:45 Received message from Master: op=Shutter serial=140581 11:07:45 Shutter LASER close 11:07:46 Received message from Master: op=PointingHead serial=140585 11:07:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:07:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:07:46 Point started: ret=0 11:07:46 point_skyscan result=0 11:07:47 Check angles 11:07:47 SkyScan query 11:07:48 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.8<-21520 Statuses=0009 0009 11:07:48 Msec=0 True Az=136.38 Ze=-142.8 Az status=0009 Ze status=0009 11:07:48 Check angles 11:07:48 SkyScan query 11:07:48 SkyScan query done: ret=0 az=154.215<-10281 ze=-121.455<-20097 Statuses=0009 0009 11:07:48 Msec=750 True Az=154.215 Ze=-121.455 Az status=0009 Ze status=0009 11:07:49 Check angles 11:07:49 SkyScan query 11:07:49 SkyScan query done: ret=0 az=171.69<-11446 ze=-100.41<-18694 Statuses=0009 0009 11:07:49 Msec=1500 True Az=171.69 Ze=-100.41 Az status=0009 Ze status=0009 11:07:49 Check angles 11:07:49 SkyScan query 11:07:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.47<-17298 Statuses=0008 0009 11:07:50 Msec=2250 True Az=176.01 Ze=-79.47 Az status=0008 Ze status=0009 11:07:50 Check angles 11:07:50 SkyScan query 11:07:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.08<-15872 Statuses=0008 0009 11:07:51 Msec=3000 True Az=176.01 Ze=-58.08 Az status=0008 Ze status=0009 11:07:51 Check angles 11:07:51 SkyScan query 11:07:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 11:07:51 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 11:07:51 Message to Master queued w/err=0: serial=140585 error=0 11:07:56 Received message from Master: op=Filter serial=140586 11:07:56 Color wheel filter change from 0 to 0 11:07:56 FLIGetFilterPos err=0 currentPosition=0 11:07:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:56 Filter is already there-color wheel unchanged 11:07:57 Received message from Master: op=Shutter serial=140587 11:07:57 Shutter LASER close 11:07:57 Received message from Camera: op=State serial=140589 11:07:57 GetSingleValue result=40 Value=cccccccc 11:07:57 SkyScan query 11:07:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:07:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:57 Parameters OK 11:07:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:57 Set A/D data flow result=40 11:07:57 Set A/D channel type result=40 11:07:57 Set A/D encoding result=40 11:07:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:57 Set channel filter=0.000000e+000 result=40 11:07:57 Config A/D Result=40 11:07:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:57 Get A/D filter: -9.255963e+061 result=40 11:07:57 Get A/D value=-858993460 result=40 11:07:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:57 Parameters OK 11:07:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:57 Set A/D data flow result=40 11:07:57 Set A/D channel type result=40 11:07:57 Set A/D encoding result=40 11:07:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:57 Set channel filter=0.000000e+000 result=40 11:07:57 Config A/D Result=40 11:07:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:57 Get A/D filter: -9.255963e+061 result=40 11:07:57 Get A/D value=-858993460 result=40 11:07:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:57 Aux= 11:07:57 Message to Camera, serial 140589 queued 11:08:34 Received message from Master: op=PointingHead serial=140602 11:08:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:08:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:08:34 Point started: ret=0 11:08:34 point_skyscan result=0 11:08:35 Check angles 11:08:35 SkyScan query 11:08:36 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.9<-13460 Statuses=0009 0009 11:08:36 Msec=0 True Az=153.12 Ze=-21.9 Az status=0009 Ze status=0009 11:08:36 Check angles 11:08:36 SkyScan query 11:08:37 SkyScan query done: ret=0 az=135.24<-9016 ze=-0.48<-12032 Statuses=0009 0009 11:08:37 Msec=750 True Az=135.24 Ze=-0.48 Az status=0009 Ze status=0009 11:08:37 Check angles 11:08:37 SkyScan query 11:08:37 SkyScan query done: ret=0 az=117.765<-7851 ze=20.49<-10634 Statuses=0009 0009 11:08:37 Msec=1500 True Az=117.765 Ze=20.49 Az status=0009 Ze status=0009 11:08:37 Check angles 11:08:37 SkyScan query 11:08:38 SkyScan query done: ret=0 az=100.29<-6686 ze=41.445<-9237 Statuses=0009 0009 11:08:38 Msec=2250 True Az=100.29 Ze=41.445 Az status=0009 Ze status=0009 11:08:38 Check angles 11:08:38 SkyScan query 11:08:39 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 11:08:39 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 11:08:39 Check angles 11:08:39 SkyScan query 11:08:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:08:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:08:40 Message to Master queued w/err=0: serial=140602 error=0 11:08:45 Received message from Master: op=Filter serial=140603 11:08:45 Color wheel filter change from 0 to 0 11:08:45 FLIGetFilterPos err=0 currentPosition=0 11:08:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:45 Filter is already there-color wheel unchanged 11:08:45 Received message from Master: op=Shutter serial=140604 11:08:45 Shutter LASER close 11:08:45 Received message from Camera: op=State serial=140606 11:08:45 GetSingleValue result=40 Value=cccccccc 11:08:45 SkyScan query 11:08:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:08:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:45 Parameters OK 11:08:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:45 Set A/D data flow result=40 11:08:45 Set A/D channel type result=40 11:08:45 Set A/D encoding result=40 11:08:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:45 Set channel filter=0.000000e+000 result=40 11:08:45 Config A/D Result=40 11:08:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:45 Get A/D filter: -9.255963e+061 result=40 11:08:45 Get A/D value=-858993460 result=40 11:08:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:45 Parameters OK 11:08:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:45 Set A/D data flow result=40 11:08:45 Set A/D channel type result=40 11:08:45 Set A/D encoding result=40 11:08:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:45 Set channel filter=0.000000e+000 result=40 11:08:45 Config A/D Result=40 11:08:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:45 Get A/D filter: -9.255963e+061 result=40 11:08:45 Get A/D value=-858993460 result=40 11:08:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:45 Aux= 11:08:45 Message to Camera, serial 140606 queued 11:09:22 Received message from Master: op=PointingHead serial=140619 11:09:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:09:22 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:09:23 Point started: ret=0 11:09:23 point_skyscan result=0 11:09:23 Check angles 11:09:23 SkyScan query 11:09:24 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 11:09:24 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 11:09:24 Check angles 11:09:24 SkyScan query 11:09:25 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 11:09:25 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 11:09:25 Check angles 11:09:25 SkyScan query 11:09:25 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 11:09:25 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 11:09:26 Check angles 11:09:26 SkyScan query 11:09:26 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 11:09:26 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 11:09:26 Check angles 11:09:26 SkyScan query 11:09:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:09:27 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:09:27 Check angles 11:09:27 SkyScan query 11:09:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:09:28 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:09:28 Message to Master queued w/err=0: serial=140619 error=0 11:09:33 Received message from Master: op=Filter serial=140620 11:09:33 Color wheel filter change from 0 to 0 11:09:33 FLIGetFilterPos err=0 currentPosition=0 11:09:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:33 Filter is already there-color wheel unchanged 11:09:33 Received message from Master: op=Shutter serial=140621 11:09:33 Shutter LASER close 11:09:33 Received message from Camera: op=State serial=140623 11:09:33 GetSingleValue result=40 Value=cccccccc 11:09:33 SkyScan query 11:09:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:09:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:33 Parameters OK 11:09:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:33 Set A/D data flow result=40 11:09:33 Set A/D channel type result=40 11:09:33 Set A/D encoding result=40 11:09:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:33 Set channel filter=0.000000e+000 result=40 11:09:33 Config A/D Result=40 11:09:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:33 Get A/D filter: -9.255963e+061 result=40 11:09:33 Get A/D value=-858993460 result=40 11:09:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:33 Parameters OK 11:09:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:33 Set A/D data flow result=40 11:09:33 Set A/D channel type result=40 11:09:33 Set A/D encoding result=40 11:09:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:33 Set channel filter=0.000000e+000 result=40 11:09:33 Config A/D Result=40 11:09:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:33 Get A/D filter: -9.255963e+061 result=40 11:09:33 Get A/D value=-858993460 result=40 11:09:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:33 Aux= 11:09:33 Message to Camera, serial 140623 queued 11:10:10 Received message from Master: op=PointingHead serial=140636 11:10:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:10:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:10:11 Point started: ret=0 11:10:11 point_skyscan result=0 11:10:11 Check angles 11:10:11 SkyScan query 11:10:12 SkyScan query done: ret=0 az=152.865<-10191 ze=8.535<-11431 Statuses=0009 0009 11:10:12 Msec=0 True Az=152.865 Ze=8.535 Az status=0009 Ze status=0009 11:10:12 Check angles 11:10:12 SkyScan query 11:10:13 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.405<-12827 Statuses=0009 0009 11:10:13 Msec=750 True Az=135.3 Ze=-12.405 Az status=0009 Ze status=0009 11:10:13 Check angles 11:10:13 SkyScan query 11:10:13 SkyScan query done: ret=0 az=117.51<-7834 ze=-33.84<-14256 Statuses=0009 0009 11:10:13 Msec=1500 True Az=117.51 Ze=-33.84 Az status=0009 Ze status=0009 11:10:14 Check angles 11:10:14 SkyScan query 11:10:14 SkyScan query done: ret=0 az=99.735<-6649 ze=-51.57<-15438 Statuses=0009 0009 11:10:14 Msec=2250 True Az=99.735 Ze=-51.57 Az status=0009 Ze status=0009 11:10:14 Check angles 11:10:14 SkyScan query 11:10:15 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 11:10:15 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 11:10:15 Check angles 11:10:15 SkyScan query 11:10:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:10:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:10:16 Message to Master queued w/err=0: serial=140636 error=0 11:10:21 Received message from Master: op=Filter serial=140637 11:10:21 Color wheel filter change from 0 to 0 11:10:21 FLIGetFilterPos err=0 currentPosition=0 11:10:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:10:21 Filter is already there-color wheel unchanged 11:10:21 Received message from Master: op=Shutter serial=140638 11:10:21 Shutter LASER close 11:10:21 Received message from Camera: op=State serial=140640 11:10:21 GetSingleValue result=40 Value=cccccccc 11:10:21 SkyScan query 11:10:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:10:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:22 Parameters OK 11:10:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:22 Set A/D data flow result=40 11:10:22 Set A/D channel type result=40 11:10:22 Set A/D encoding result=40 11:10:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:22 Set channel filter=0.000000e+000 result=40 11:10:22 Config A/D Result=40 11:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:22 Get A/D filter: -9.255963e+061 result=40 11:10:22 Get A/D value=-858993460 result=40 11:10:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:22 Parameters OK 11:10:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:22 Set A/D data flow result=40 11:10:22 Set A/D channel type result=40 11:10:22 Set A/D encoding result=40 11:10:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:22 Set channel filter=0.000000e+000 result=40 11:10:22 Config A/D Result=40 11:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:22 Get A/D filter: -9.255963e+061 result=40 11:10:22 Get A/D value=-858993460 result=40 11:10:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:10:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:10:22 Aux= 11:10:22 Message to Camera, serial 140640 queued 11:10:58 Received message from Master: op=PointingHead serial=140653 11:10:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:10:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:10:59 Point started: ret=0 11:10:59 point_skyscan result=0 11:10:59 Check angles 11:10:59 SkyScan query 11:11:00 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.525<-17435 Statuses=0009 0009 11:11:00 Msec=0 True Az=109.125 Ze=-81.525 Az status=0009 Ze status=0009 11:11:00 Check angles 11:11:00 SkyScan query 11:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 11:11:01 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 11:11:01 Check angles 11:11:01 SkyScan query 11:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.87<-20258 Statuses=0008 0009 11:11:02 Msec=1500 True Az=112.995 Ze=-123.87 Az status=0008 Ze status=0009 11:11:02 Check angles 11:11:02 SkyScan query 11:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.795<-21653 Statuses=0008 0009 11:11:02 Msec=2250 True Az=112.995 Ze=-144.795 Az status=0008 Ze status=0009 11:11:02 Check angles 11:11:02 SkyScan query 11:11:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 11:11:03 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 11:11:03 Check angles 11:11:03 SkyScan query 11:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 11:11:04 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 11:11:04 Message to Master queued w/err=0: serial=140653 error=0 11:11:09 Received message from Master: op=Filter serial=140654 11:11:09 Color wheel filter change from 0 to 0 11:11:09 FLIGetFilterPos err=0 currentPosition=0 11:11:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:09 Filter is already there-color wheel unchanged 11:11:09 Received message from Master: op=Shutter serial=140655 11:11:09 Shutter LASER open 11:11:09 Received message from Camera: op=State serial=140657 11:11:09 GetSingleValue result=40 Value=cccccccc 11:11:09 SkyScan query 11:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:11:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:10 Parameters OK 11:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:10 Set A/D data flow result=40 11:11:10 Set A/D channel type result=40 11:11:10 Set A/D encoding result=40 11:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:10 Set channel filter=0.000000e+000 result=40 11:11:10 Config A/D Result=40 11:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:10 Get A/D filter: -9.255963e+061 result=40 11:11:10 Get A/D value=-858993460 result=40 11:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:10 Parameters OK 11:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:10 Set A/D data flow result=40 11:11:10 Set A/D channel type result=40 11:11:10 Set A/D encoding result=40 11:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:10 Set channel filter=0.000000e+000 result=40 11:11:10 Config A/D Result=40 11:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:10 Get A/D filter: -9.255963e+061 result=40 11:11:10 Get A/D value=-858993460 result=40 11:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:10 Aux= 11:11:10 Message to Camera, serial 140657 queued 11:11:18 Received message from Master: op=Shutter serial=140667 11:11:18 Shutter LASER close 11:11:19 Received message from Master: op=PointingHead serial=140671 11:11:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:11:19 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:11:19 Point started: ret=0 11:11:19 point_skyscan result=0 11:11:20 Check angles 11:11:20 SkyScan query 11:11:20 SkyScan query done: ret=0 az=89.49<-5966 ze=156.75<-1550 Statuses=0009 0009 11:11:20 Msec=0 True Az=89.49 Ze=156.75 Az status=0009 Ze status=0009 11:11:21 Check angles 11:11:21 SkyScan query 11:11:21 SkyScan query done: ret=0 az=72<-4800 ze=135.84<-2944 Statuses=0009 0009 11:11:21 Msec=750 True Az=72 Ze=135.84 Az status=0009 Ze status=0009 11:11:21 Check angles 11:11:21 SkyScan query 11:11:22 SkyScan query done: ret=0 az=54.585<-3639 ze=114.84<-4344 Statuses=0009 0009 11:11:22 Msec=1500 True Az=54.585 Ze=114.84 Az status=0009 Ze status=0009 11:11:22 Check angles 11:11:22 SkyScan query 11:11:23 SkyScan query done: ret=0 az=40.98<-2732 ze=93.915<-5739 Statuses=0009 0009 11:11:23 Msec=2250 True Az=40.98 Ze=93.915 Az status=0009 Ze status=0009 11:11:23 Check angles 11:11:23 SkyScan query 11:11:23 SkyScan query done: ret=0 az=40.995<-2733 ze=72.9<-7140 Statuses=0008 0009 11:11:23 Msec=3000 True Az=40.995 Ze=72.9 Az status=0008 Ze status=0009 11:11:24 Check angles 11:11:24 SkyScan query 11:11:24 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 11:11:24 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 11:11:24 Check angles 11:11:24 SkyScan query 11:11:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:11:25 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:11:25 Message to Master queued w/err=0: serial=140671 error=0 11:11:30 Received message from Master: op=Filter serial=140672 11:11:30 Color wheel filter change from 0 to 0 11:11:30 FLIGetFilterPos err=0 currentPosition=0 11:11:30 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:30 Filter is already there-color wheel unchanged 11:11:30 Received message from Master: op=Shutter serial=140673 11:11:30 Shutter LASER close 11:11:30 Received message from Camera: op=State serial=140675 11:11:30 GetSingleValue result=40 Value=cccccccc 11:11:30 SkyScan query 11:11:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:11:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:31 Parameters OK 11:11:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:31 Set A/D data flow result=40 11:11:31 Set A/D channel type result=40 11:11:31 Set A/D encoding result=40 11:11:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:31 Set channel filter=0.000000e+000 result=40 11:11:31 Config A/D Result=40 11:11:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:31 Get A/D filter: -9.255963e+061 result=40 11:11:31 Get A/D value=-858993460 result=40 11:11:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:31 Parameters OK 11:11:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:31 Set A/D data flow result=40 11:11:31 Set A/D channel type result=40 11:11:31 Set A/D encoding result=40 11:11:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:31 Set channel filter=0.000000e+000 result=40 11:11:31 Config A/D Result=40 11:11:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:31 Get A/D filter: -9.255963e+061 result=40 11:11:31 Get A/D value=-858993460 result=40 11:11:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:31 Aux= 11:11:31 Message to Camera, serial 140675 queued 11:12:08 Received message from Master: op=PointingHead serial=140688 11:12:08 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:12:08 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:12:08 Point started: ret=0 11:12:08 point_skyscan result=0 11:12:09 Check angles 11:12:09 SkyScan query 11:12:09 SkyScan query done: ret=0 az=64.125<-4275 ze=66.54<-7564 Statuses=0009 0008 11:12:09 Msec=0 True Az=64.125 Ze=66.54 Az status=0009 Ze status=0008 11:12:09 Check angles 11:12:09 SkyScan query 11:12:10 SkyScan query done: ret=0 az=82.02<-5468 ze=66.51<-7566 Statuses=0009 0008 11:12:10 Msec=750 True Az=82.02 Ze=66.51 Az status=0009 Ze status=0008 11:12:10 Check angles 11:12:10 SkyScan query 11:12:11 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 11:12:11 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 11:12:11 Check angles 11:12:11 SkyScan query 11:12:12 SkyScan query done: ret=0 az=116.865<-7791 ze=66.495<-7567 Statuses=0009 0008 11:12:12 Msec=2250 True Az=116.865 Ze=66.495 Az status=0009 Ze status=0008 11:12:12 Check angles 11:12:12 SkyScan query 11:12:12 SkyScan query done: ret=0 az=134.745<-8983 ze=66.495<-7567 Statuses=0009 0008 11:12:12 Msec=3000 True Az=134.745 Ze=66.495 Az status=0009 Ze status=0008 11:12:13 Check angles 11:12:13 SkyScan query 11:12:13 SkyScan query done: ret=0 az=152.595<-10173 ze=66.495<-7567 Statuses=0009 0008 11:12:13 Msec=3750 True Az=152.595 Ze=66.495 Az status=0009 Ze status=0008 11:12:13 Check angles 11:12:13 SkyScan query 11:12:14 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:12:14 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:12:14 Message to Master queued w/err=0: serial=140688 error=0 11:12:19 Received message from Master: op=Filter serial=140689 11:12:19 Color wheel filter change from 0 to 0 11:12:19 FLIGetFilterPos err=0 currentPosition=0 11:12:19 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:19 Filter is already there-color wheel unchanged 11:12:19 Received message from Master: op=Shutter serial=140690 11:12:19 Shutter LASER close 11:12:19 Received message from Camera: op=State serial=140692 11:12:19 GetSingleValue result=40 Value=cccccccc 11:12:19 SkyScan query 11:12:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:12:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:20 Parameters OK 11:12:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:20 Set A/D data flow result=40 11:12:20 Set A/D channel type result=40 11:12:20 Set A/D encoding result=40 11:12:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:20 Set channel filter=0.000000e+000 result=40 11:12:20 Config A/D Result=40 11:12:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:20 Get A/D filter: -9.255963e+061 result=40 11:12:20 Get A/D value=-858993460 result=40 11:12:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:20 Parameters OK 11:12:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:20 Set A/D data flow result=40 11:12:20 Set A/D channel type result=40 11:12:20 Set A/D encoding result=40 11:12:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:20 Set channel filter=0.000000e+000 result=40 11:12:20 Config A/D Result=40 11:12:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:20 Get A/D filter: -9.255963e+061 result=40 11:12:20 Get A/D value=-858993460 result=40 11:12:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:20 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:20 Aux= 11:12:20 Message to Camera, serial 140692 queued 11:12:56 Received message from Master: op=PointingHead serial=140705 11:12:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:12:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:12:57 Point started: ret=0 11:12:57 point_skyscan result=0 11:12:58 Check angles 11:12:58 SkyScan query 11:12:58 SkyScan query done: ret=0 az=134.535<-8969 ze=36.165<-9589 Statuses=0009 0009 11:12:58 Msec=0 True Az=134.535 Ze=36.165 Az status=0009 Ze status=0009 11:12:58 Check angles 11:12:58 SkyScan query 11:12:59 SkyScan query done: ret=0 az=117.045<-7803 ze=15.24<-10984 Statuses=0009 0009 11:12:59 Msec=750 True Az=117.045 Ze=15.24 Az status=0009 Ze status=0009 11:12:59 Check angles 11:12:59 SkyScan query 11:13:00 SkyScan query done: ret=0 az=99.105<-6607 ze=-6.24<-12416 Statuses=0009 0009 11:13:00 Msec=1500 True Az=99.105 Ze=-6.24 Az status=0009 Ze status=0009 11:13:00 Check angles 11:13:00 SkyScan query 11:13:00 SkyScan query done: ret=0 az=81.495<-5433 ze=-27.585<-13839 Statuses=0009 0009 11:13:00 Msec=2250 True Az=81.495 Ze=-27.585 Az status=0009 Ze status=0009 11:13:01 Check angles 11:13:01 SkyScan query 11:13:01 SkyScan query done: ret=0 az=63.555<-4237 ze=-38.58<-14572 Statuses=0009 0008 11:13:01 Msec=3000 True Az=63.555 Ze=-38.58 Az status=0009 Ze status=0008 11:13:01 Check angles 11:13:01 SkyScan query 11:13:02 SkyScan query done: ret=0 az=46.17<-3078 ze=-38.52<-14568 Statuses=0009 0008 11:13:02 Msec=3750 True Az=46.17 Ze=-38.52 Az status=0009 Ze status=0008 11:13:02 Check angles 11:13:02 SkyScan query 11:13:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:13:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:13:03 Message to Master queued w/err=0: serial=140705 error=0 11:13:08 Received message from Master: op=Filter serial=140706 11:13:08 Color wheel filter change from 0 to 0 11:13:08 FLIGetFilterPos err=0 currentPosition=0 11:13:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:08 Filter is already there-color wheel unchanged 11:13:08 Received message from Master: op=Shutter serial=140707 11:13:08 Shutter LASER close 11:13:08 Received message from Camera: op=State serial=140709 11:13:08 GetSingleValue result=40 Value=cccccccc 11:13:08 SkyScan query 11:13:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:13:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:09 Parameters OK 11:13:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:09 Set A/D data flow result=40 11:13:09 Set A/D channel type result=40 11:13:09 Set A/D encoding result=40 11:13:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:09 Set channel filter=0.000000e+000 result=40 11:13:09 Config A/D Result=40 11:13:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:09 Get A/D filter: -9.255963e+061 result=40 11:13:09 Get A/D value=-858993460 result=40 11:13:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:09 Parameters OK 11:13:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:09 Set A/D data flow result=40 11:13:09 Set A/D channel type result=40 11:13:09 Set A/D encoding result=40 11:13:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:09 Set channel filter=0.000000e+000 result=40 11:13:09 Config A/D Result=40 11:13:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:09 Get A/D filter: -9.255963e+061 result=40 11:13:09 Get A/D value=-858993460 result=40 11:13:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:09 Aux= 11:13:09 Message to Camera, serial 140709 queued 11:13:45 Received message from Master: op=PointingHead serial=140722 11:13:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:13:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:13:46 Point started: ret=0 11:13:46 point_skyscan result=0 11:13:46 Check angles 11:13:46 SkyScan query 11:13:47 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.625<-16575 Statuses=0009 0009 11:13:47 Msec=0 True Az=64.215 Ze=-68.625 Az status=0009 Ze status=0009 11:13:47 Check angles 11:13:47 SkyScan query 11:13:48 SkyScan query done: ret=0 az=82.155<-5477 ze=-89.985<-17999 Statuses=0009 0009 11:13:48 Msec=750 True Az=82.155 Ze=-89.985 Az status=0009 Ze status=0009 11:13:48 Check angles 11:13:48 SkyScan query 11:13:49 SkyScan query done: ret=0 az=99.54<-6636 ze=-110.97<-19398 Statuses=0009 0009 11:13:49 Msec=1500 True Az=99.54 Ze=-110.97 Az status=0009 Ze status=0009 11:13:49 Check angles 11:13:49 SkyScan query 11:13:49 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.85<-20790 Statuses=0009 0009 11:13:49 Msec=2250 True Az=117.105 Ze=-131.85 Az status=0009 Ze status=0009 11:13:49 Check angles 11:13:49 SkyScan query 11:13:50 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 11:13:50 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 11:13:50 Check angles 11:13:50 SkyScan query 11:13:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 11:13:51 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 11:13:51 Message to Master queued w/err=0: serial=140722 error=0 11:13:56 Received message from Master: op=Filter serial=140723 11:13:56 Color wheel filter change from 0 to 0 11:13:56 FLIGetFilterPos err=0 currentPosition=0 11:13:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:56 Filter is already there-color wheel unchanged 11:13:56 Received message from Master: op=Shutter serial=140724 11:13:56 Shutter LASER close 11:13:56 Received message from Camera: op=State serial=140726 11:13:56 GetSingleValue result=40 Value=cccccccc 11:13:56 SkyScan query 11:13:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:13:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:57 Parameters OK 11:13:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:57 Set A/D data flow result=40 11:13:57 Set A/D channel type result=40 11:13:57 Set A/D encoding result=40 11:13:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:57 Set channel filter=0.000000e+000 result=40 11:13:57 Config A/D Result=40 11:13:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:57 Get A/D filter: -9.255963e+061 result=40 11:13:57 Get A/D value=-858993460 result=40 11:13:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:57 Parameters OK 11:13:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:57 Set A/D data flow result=40 11:13:57 Set A/D channel type result=40 11:13:57 Set A/D encoding result=40 11:13:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:57 Set channel filter=0.000000e+000 result=40 11:13:57 Config A/D Result=40 11:13:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:57 Get A/D filter: -9.255963e+061 result=40 11:13:57 Get A/D value=-858993460 result=40 11:13:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:57 Aux= 11:13:57 Message to Camera, serial 140726 queued 11:14:33 Received message from Master: op=PointingHead serial=140739 11:14:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:14:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:14:34 Point started: ret=0 11:14:34 point_skyscan result=0 11:14:35 Check angles 11:14:35 SkyScan query 11:14:35 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 11:14:35 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 11:14:35 Check angles 11:14:35 SkyScan query 11:14:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:14:36 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:14:36 Message to Master queued w/err=0: serial=140739 error=0 11:14:41 Received message from Master: op=Filter serial=140740 11:14:41 Color wheel filter change from 0 to 0 11:14:41 FLIGetFilterPos err=0 currentPosition=0 11:14:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:41 Filter is already there-color wheel unchanged 11:14:41 Received message from Master: op=Shutter serial=140741 11:14:41 Shutter LASER open 11:14:41 Received message from Camera: op=State serial=140743 11:14:41 GetSingleValue result=40 Value=cccccccc 11:14:41 SkyScan query 11:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:14:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:42 Parameters OK 11:14:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:42 Set A/D data flow result=40 11:14:42 Set A/D channel type result=40 11:14:42 Set A/D encoding result=40 11:14:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:42 Set channel filter=0.000000e+000 result=40 11:14:42 Config A/D Result=40 11:14:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:42 Get A/D filter: -9.255963e+061 result=40 11:14:42 Get A/D value=-858993460 result=40 11:14:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:42 Parameters OK 11:14:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:42 Set A/D data flow result=40 11:14:42 Set A/D channel type result=40 11:14:42 Set A/D encoding result=40 11:14:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:42 Set channel filter=0.000000e+000 result=40 11:14:42 Config A/D Result=40 11:14:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:42 Get A/D filter: -9.255963e+061 result=40 11:14:42 Get A/D value=-858993460 result=40 11:14:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:42 Aux= 11:14:42 Message to Camera, serial 140743 queued 11:14:50 Received message from Master: op=Shutter serial=140753 11:14:50 Shutter LASER close 11:14:51 Received message from Master: op=PointingHead serial=140757 11:14:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:14:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:14:51 Point started: ret=0 11:14:51 point_skyscan result=0 11:14:52 Check angles 11:14:52 SkyScan query 11:14:53 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.995<-21533 Statuses=0009 0009 11:14:53 Msec=0 True Az=136.215 Ze=-142.995 Az status=0009 Ze status=0009 11:14:53 Check angles 11:14:53 SkyScan query 11:14:53 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.025<-20135 Statuses=0009 0009 11:14:53 Msec=750 True Az=153.645 Ze=-122.025 Az status=0009 Ze status=0009 11:14:53 Check angles 11:14:53 SkyScan query 11:14:54 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.055<-18737 Statuses=0009 0009 11:14:54 Msec=1500 True Az=171.24 Ze=-101.055 Az status=0009 Ze status=0009 11:14:54 Check angles 11:14:54 SkyScan query 11:14:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.145<-17343 Statuses=0008 0009 11:14:55 Msec=2250 True Az=176.01 Ze=-80.145 Az status=0008 Ze status=0009 11:14:55 Check angles 11:14:55 SkyScan query 11:14:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.145<-15943 Statuses=0008 0009 11:14:56 Msec=3000 True Az=176.01 Ze=-59.145 Az status=0008 Ze status=0009 11:14:56 Check angles 11:14:56 SkyScan query 11:14:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:14:56 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:14:56 Message to Master queued w/err=0: serial=140757 error=0 11:15:01 Received message from Master: op=Filter serial=140758 11:15:01 Color wheel filter change from 0 to 0 11:15:01 FLIGetFilterPos err=0 currentPosition=0 11:15:01 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:01 Filter is already there-color wheel unchanged 11:15:01 Received message from Master: op=Shutter serial=140759 11:15:01 Shutter LASER close 11:15:02 Received message from Camera: op=State serial=140761 11:15:02 GetSingleValue result=40 Value=cccccccc 11:15:02 SkyScan query 11:15:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:15:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:02 Parameters OK 11:15:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:02 Set A/D data flow result=40 11:15:02 Set A/D channel type result=40 11:15:02 Set A/D encoding result=40 11:15:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:02 Set channel filter=0.000000e+000 result=40 11:15:02 Config A/D Result=40 11:15:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:02 Get A/D filter: -9.255963e+061 result=40 11:15:02 Get A/D value=-858993460 result=40 11:15:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:02 Parameters OK 11:15:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:02 Set A/D data flow result=40 11:15:02 Set A/D channel type result=40 11:15:02 Set A/D encoding result=40 11:15:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:02 Set channel filter=0.000000e+000 result=40 11:15:02 Config A/D Result=40 11:15:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:02 Get A/D filter: -9.255963e+061 result=40 11:15:02 Get A/D value=-858993460 result=40 11:15:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:02 Aux= 11:15:02 Message to Camera, serial 140761 queued 11:15:27 Received message from Master: op=Identify serial=140762 11:15:38 Received message from Master: op=PointingHead serial=140776 11:15:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:15:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:15:38 Point started: ret=0 11:15:38 point_skyscan result=0 11:15:39 Check angles 11:15:39 SkyScan query 11:15:40 SkyScan query done: ret=0 az=152.85<-10190 ze=-21.48<-13432 Statuses=0009 0009 11:15:40 Msec=0 True Az=152.85 Ze=-21.48 Az status=0009 Ze status=0009 [UTC 2018-12-14 11:15:40] 11:15:40 Check angles 11:15:40 SkyScan query 11:15:41 SkyScan query done: ret=0 az=133.665<-8911 ze=1.23<-11918 Statuses=0009 0009 11:15:41 Msec=750 True Az=133.665 Ze=1.23 Az status=0009 Ze status=0009 11:15:41 Check angles 11:15:41 SkyScan query 11:15:41 SkyScan query done: ret=0 az=117.81<-7854 ze=20.445<-10637 Statuses=0009 0009 11:15:41 Msec=1500 True Az=117.81 Ze=20.445 Az status=0009 Ze status=0009 11:15:41 Check angles 11:15:41 SkyScan query 11:15:42 SkyScan query done: ret=0 az=100.425<-6695 ze=41.4<-9240 Statuses=0009 0009 11:15:42 Msec=2250 True Az=100.425 Ze=41.4 Az status=0009 Ze status=0009 11:15:42 Check angles 11:15:42 SkyScan query 11:15:43 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 11:15:43 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 11:15:43 Check angles 11:15:43 SkyScan query 11:15:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:15:44 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:15:44 Message to Master queued w/err=0: serial=140776 error=0 11:15:49 Received message from Master: op=Filter serial=140777 11:15:49 Color wheel filter change from 0 to 0 11:15:49 FLIGetFilterPos err=0 currentPosition=0 11:15:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:49 Filter is already there-color wheel unchanged 11:15:49 Received message from Master: op=Shutter serial=140778 11:15:49 Shutter LASER close 11:15:49 Received message from Camera: op=State serial=140780 11:15:49 GetSingleValue result=40 Value=cccccccc 11:15:49 SkyScan query 11:15:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:15:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:49 Parameters OK 11:15:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:49 Set A/D data flow result=40 11:15:49 Set A/D channel type result=40 11:15:49 Set A/D encoding result=40 11:15:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:49 Set channel filter=0.000000e+000 result=40 11:15:49 Config A/D Result=40 11:15:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:49 Get A/D filter: -9.255963e+061 result=40 11:15:49 Get A/D value=-858993460 result=40 11:15:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:49 Parameters OK 11:15:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:49 Set A/D data flow result=40 11:15:49 Set A/D channel type result=40 11:15:49 Set A/D encoding result=40 11:15:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:49 Set channel filter=0.000000e+000 result=40 11:15:49 Config A/D Result=40 11:15:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:49 Get A/D filter: -9.255963e+061 result=40 11:15:49 Get A/D value=-858993460 result=40 11:15:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:49 Aux= 11:15:49 Message to Camera, serial 140780 queued [UTC 2018-12-14 11:15:52] 11:16:26 Received message from Master: op=PointingHead serial=140793 11:16:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:16:26 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:16:26 Point started: ret=0 11:16:26 point_skyscan result=0 11:16:27 Check angles 11:16:27 SkyScan query 11:16:28 SkyScan query done: ret=0 az=109.245<-7283 ze=38.49<-9434 Statuses=0009 0008 11:16:28 Msec=0 True Az=109.245 Ze=38.49 Az status=0009 Ze status=0008 11:16:28 Check angles 11:16:28 SkyScan query 11:16:29 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 11:16:29 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 11:16:29 Check angles 11:16:29 SkyScan query 11:16:29 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 11:16:29 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 11:16:29 Check angles 11:16:29 SkyScan query 11:16:30 SkyScan query done: ret=0 az=161.985<-10799 ze=38.505<-9433 Statuses=0009 0008 11:16:30 Msec=2250 True Az=161.985 Ze=38.505 Az status=0009 Ze status=0008 11:16:30 Check angles 11:16:30 SkyScan query 11:16:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:16:31 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:16:31 Check angles 11:16:31 SkyScan query 11:16:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:16:32 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:16:32 Message to Master queued w/err=0: serial=140793 error=0 11:16:37 Received message from Master: op=Filter serial=140794 11:16:37 Color wheel filter change from 0 to 0 11:16:37 FLIGetFilterPos err=0 currentPosition=0 11:16:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:37 Filter is already there-color wheel unchanged 11:16:37 Received message from Master: op=Shutter serial=140795 11:16:37 Shutter LASER close 11:16:37 Received message from Camera: op=State serial=140797 11:16:37 GetSingleValue result=40 Value=cccccccc 11:16:37 SkyScan query 11:16:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:16:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:37 Parameters OK 11:16:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:37 Set A/D data flow result=40 11:16:37 Set A/D channel type result=40 11:16:37 Set A/D encoding result=40 11:16:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:37 Set channel filter=0.000000e+000 result=40 11:16:37 Config A/D Result=40 11:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:37 Get A/D filter: -9.255963e+061 result=40 11:16:37 Get A/D value=-858993460 result=40 11:16:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:37 Parameters OK 11:16:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:37 Set A/D data flow result=40 11:16:37 Set A/D channel type result=40 11:16:37 Set A/D encoding result=40 11:16:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:37 Set channel filter=0.000000e+000 result=40 11:16:37 Config A/D Result=40 11:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:37 Get A/D filter: -9.255963e+061 result=40 11:16:37 Get A/D value=-858993460 result=40 11:16:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:37 Aux= 11:16:37 Message to Camera, serial 140797 queued 11:17:14 Received message from Master: op=PointingHead serial=140810 11:17:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:17:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:17:15 Point started: ret=0 11:17:15 point_skyscan result=0 11:17:15 Check angles 11:17:15 SkyScan query 11:17:16 SkyScan query done: ret=0 az=152.895<-10193 ze=8.655<-11423 Statuses=0009 0009 11:17:16 Msec=0 True Az=152.895 Ze=8.655 Az status=0009 Ze status=0009 11:17:16 Check angles 11:17:16 SkyScan query 11:17:17 SkyScan query done: ret=0 az=134.97<-8998 ze=-12.72<-12848 Statuses=0009 0009 11:17:17 Msec=750 True Az=134.97 Ze=-12.72 Az status=0009 Ze status=0009 11:17:17 Check angles 11:17:17 SkyScan query 11:17:17 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.735<-14249 Statuses=0009 0009 11:17:17 Msec=1500 True Az=117.555 Ze=-33.735 Az status=0009 Ze status=0009 11:17:18 Check angles 11:17:18 SkyScan query 11:17:18 SkyScan query done: ret=0 az=100.125<-6675 ze=-51.57<-15438 Statuses=0009 0009 11:17:18 Msec=2250 True Az=100.125 Ze=-51.57 Az status=0009 Ze status=0009 11:17:18 Check angles 11:17:18 SkyScan query 11:17:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 11:17:19 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 11:17:19 Check angles 11:17:19 SkyScan query 11:17:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:17:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:17:20 Message to Master queued w/err=0: serial=140810 error=0 11:17:25 Received message from Master: op=Filter serial=140811 11:17:25 Color wheel filter change from 0 to 0 11:17:25 FLIGetFilterPos err=0 currentPosition=0 11:17:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:25 Filter is already there-color wheel unchanged 11:17:25 Received message from Master: op=Shutter serial=140812 11:17:25 Shutter LASER close 11:17:25 Received message from Camera: op=State serial=140814 11:17:25 GetSingleValue result=40 Value=cccccccc 11:17:25 SkyScan query 11:17:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:17:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:25 Parameters OK 11:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:25 Set A/D data flow result=40 11:17:25 Set A/D channel type result=40 11:17:25 Set A/D encoding result=40 11:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:25 Set channel filter=0.000000e+000 result=40 11:17:25 Config A/D Result=40 11:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:25 Get A/D filter: -9.255963e+061 result=40 11:17:25 Get A/D value=-858993460 result=40 11:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:25 Parameters OK 11:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:25 Set A/D data flow result=40 11:17:25 Set A/D channel type result=40 11:17:25 Set A/D encoding result=40 11:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:25 Set channel filter=0.000000e+000 result=40 11:17:25 Config A/D Result=40 11:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:25 Get A/D filter: -9.255963e+061 result=40 11:17:25 Get A/D value=-858993460 result=40 11:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:25 Aux= 11:17:25 Message to Camera, serial 140814 queued 11:18:02 Received message from Master: op=PointingHead serial=140827 11:18:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:18:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:18:03 Point started: ret=0 11:18:03 point_skyscan result=0 11:18:03 Check angles 11:18:03 SkyScan query 11:18:04 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.15<-17410 Statuses=0009 0009 11:18:04 Msec=0 True Az=108.975 Ze=-81.15 Az status=0009 Ze status=0009 11:18:04 Check angles 11:18:04 SkyScan query 11:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.135<-18809 Statuses=0008 0009 11:18:05 Msec=750 True Az=112.995 Ze=-102.135 Az status=0008 Ze status=0009 11:18:05 Check angles 11:18:05 SkyScan query 11:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.06<-20204 Statuses=0008 0009 11:18:05 Msec=1500 True Az=112.995 Ze=-123.06 Az status=0008 Ze status=0009 11:18:06 Check angles 11:18:06 SkyScan query 11:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.045<-21603 Statuses=0008 0009 11:18:06 Msec=2250 True Az=112.995 Ze=-144.045 Az status=0008 Ze status=0009 11:18:06 Check angles 11:18:06 SkyScan query 11:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 11:18:07 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 11:18:07 Check angles 11:18:07 SkyScan query 11:18:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:18:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:18:08 Message to Master queued w/err=0: serial=140827 error=0 11:18:13 Received message from Master: op=Filter serial=140828 11:18:13 Color wheel filter change from 0 to 0 11:18:13 FLIGetFilterPos err=0 currentPosition=0 11:18:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:13 Filter is already there-color wheel unchanged 11:18:13 Received message from Master: op=Shutter serial=140829 11:18:13 Shutter LASER open 11:18:13 Received message from Camera: op=State serial=140831 11:18:13 GetSingleValue result=40 Value=cccccccc 11:18:13 SkyScan query 11:18:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:18:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:14 Parameters OK 11:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:14 Set A/D data flow result=40 11:18:14 Set A/D channel type result=40 11:18:14 Set A/D encoding result=40 11:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:14 Set channel filter=0.000000e+000 result=40 11:18:14 Config A/D Result=40 11:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:14 Get A/D filter: -9.255963e+061 result=40 11:18:14 Get A/D value=-858993460 result=40 11:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:14 Parameters OK 11:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:14 Set A/D data flow result=40 11:18:14 Set A/D channel type result=40 11:18:14 Set A/D encoding result=40 11:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:14 Set channel filter=0.000000e+000 result=40 11:18:14 Config A/D Result=40 11:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:14 Get A/D filter: -9.255963e+061 result=40 11:18:14 Get A/D value=-858993460 result=40 11:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:14 Aux= 11:18:14 Message to Camera, serial 140831 queued 11:18:22 Received message from Master: op=Shutter serial=140841 11:18:22 Shutter LASER close 11:18:22 Received message from Master: op=PointingHead serial=140845 11:18:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:18:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:18:23 Point started: ret=0 11:18:23 point_skyscan result=0 11:18:24 Check angles 11:18:24 SkyScan query 11:18:24 SkyScan query done: ret=0 az=89.835<-5989 ze=157.26<-1516 Statuses=0009 0009 11:18:24 Msec=0 True Az=89.835 Ze=157.26 Az status=0009 Ze status=0009 11:18:24 Check angles 11:18:24 SkyScan query 11:18:25 SkyScan query done: ret=0 az=72.435<-4829 ze=136.305<-2913 Statuses=0009 0009 11:18:25 Msec=750 True Az=72.435 Ze=136.305 Az status=0009 Ze status=0009 11:18:25 Check angles 11:18:25 SkyScan query 11:18:26 SkyScan query done: ret=0 az=55.035<-3669 ze=115.365<-4309 Statuses=0009 0009 11:18:26 Msec=1500 True Az=55.035 Ze=115.365 Az status=0009 Ze status=0009 11:18:26 Check angles 11:18:26 SkyScan query 11:18:26 SkyScan query done: ret=0 az=40.965<-2731 ze=94.35<-5710 Statuses=0009 0009 11:18:26 Msec=2250 True Az=40.965 Ze=94.35 Az status=0009 Ze status=0009 11:18:27 Check angles 11:18:27 SkyScan query 11:18:27 SkyScan query done: ret=0 az=40.995<-2733 ze=72.945<-7137 Statuses=0008 0009 11:18:27 Msec=3000 True Az=40.995 Ze=72.945 Az status=0008 Ze status=0009 11:18:27 Check angles 11:18:27 SkyScan query 11:18:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 11:18:28 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 11:18:28 Check angles 11:18:28 SkyScan query 11:18:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:18:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:18:29 Message to Master queued w/err=0: serial=140845 error=0 11:18:34 Received message from Master: op=Filter serial=140846 11:18:34 Color wheel filter change from 0 to 0 11:18:34 FLIGetFilterPos err=0 currentPosition=0 11:18:34 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:34 Filter is already there-color wheel unchanged 11:18:34 Received message from Master: op=Shutter serial=140847 11:18:34 Shutter LASER close 11:18:34 Received message from Camera: op=State serial=140849 11:18:34 GetSingleValue result=40 Value=cccccccc 11:18:34 SkyScan query 11:18:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:18:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:35 Parameters OK 11:18:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:35 Set A/D data flow result=40 11:18:35 Set A/D channel type result=40 11:18:35 Set A/D encoding result=40 11:18:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:35 Set channel filter=0.000000e+000 result=40 11:18:35 Config A/D Result=40 11:18:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:35 Get A/D filter: -9.255963e+061 result=40 11:18:35 Get A/D value=-858993460 result=40 11:18:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:35 Parameters OK 11:18:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:35 Set A/D data flow result=40 11:18:35 Set A/D channel type result=40 11:18:35 Set A/D encoding result=40 11:18:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:35 Set channel filter=0.000000e+000 result=40 11:18:35 Config A/D Result=40 11:18:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:35 Get A/D filter: -9.255963e+061 result=40 11:18:35 Get A/D value=-858993460 result=40 11:18:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:35 Aux= 11:18:35 Message to Camera, serial 140849 queued 11:19:11 Received message from Master: op=PointingHead serial=140862 11:19:11 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:19:11 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:19:12 Point started: ret=0 11:19:12 point_skyscan result=0 11:19:13 Check angles 11:19:13 SkyScan query 11:19:13 SkyScan query done: ret=0 az=63.87<-4258 ze=66.54<-7564 Statuses=0009 0008 11:19:13 Msec=0 True Az=63.87 Ze=66.54 Az status=0009 Ze status=0008 11:19:13 Check angles 11:19:13 SkyScan query 11:19:14 SkyScan query done: ret=0 az=81.405<-5427 ze=66.51<-7566 Statuses=0009 0008 11:19:14 Msec=750 True Az=81.405 Ze=66.51 Az status=0009 Ze status=0008 11:19:14 Check angles 11:19:14 SkyScan query 11:19:15 SkyScan query done: ret=0 az=98.91<-6594 ze=66.495<-7567 Statuses=0009 0008 11:19:15 Msec=1500 True Az=98.91 Ze=66.495 Az status=0009 Ze status=0008 11:19:15 Check angles 11:19:15 SkyScan query 11:19:15 SkyScan query done: ret=0 az=116.4<-7760 ze=66.495<-7567 Statuses=0009 0008 11:19:15 Msec=2250 True Az=116.4 Ze=66.495 Az status=0009 Ze status=0008 11:19:16 Check angles 11:19:16 SkyScan query 11:19:16 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 11:19:16 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 11:19:16 Check angles 11:19:16 SkyScan query 11:19:17 SkyScan query done: ret=0 az=151.215<-10081 ze=66.495<-7567 Statuses=0009 0008 11:19:17 Msec=3750 True Az=151.215 Ze=66.495 Az status=0009 Ze status=0008 11:19:17 Check angles 11:19:17 SkyScan query 11:19:18 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:19:18 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:19:18 Message to Master queued w/err=0: serial=140862 error=0 11:19:23 Received message from Master: op=Filter serial=140863 11:19:23 Color wheel filter change from 0 to 0 11:19:23 FLIGetFilterPos err=0 currentPosition=0 11:19:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:23 Filter is already there-color wheel unchanged 11:19:23 Received message from Master: op=Shutter serial=140864 11:19:23 Shutter LASER close 11:19:23 Received message from Camera: op=State serial=140866 11:19:23 GetSingleValue result=40 Value=cccccccc 11:19:23 SkyScan query 11:19:23 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:19:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:23 Parameters OK 11:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:23 Set A/D data flow result=40 11:19:23 Set A/D channel type result=40 11:19:23 Set A/D encoding result=40 11:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:23 Set channel filter=0.000000e+000 result=40 11:19:23 Config A/D Result=40 11:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:23 Get A/D filter: -9.255963e+061 result=40 11:19:23 Get A/D value=-858993460 result=40 11:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:23 Parameters OK 11:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:23 Set A/D data flow result=40 11:19:23 Set A/D channel type result=40 11:19:23 Set A/D encoding result=40 11:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:23 Set channel filter=0.000000e+000 result=40 11:19:23 Config A/D Result=40 11:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:23 Get A/D filter: -9.255963e+061 result=40 11:19:23 Get A/D value=-858993460 result=40 11:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:23 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:23 Aux= 11:19:23 Message to Camera, serial 140866 queued 11:20:00 Received message from Master: op=PointingHead serial=140879 11:20:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:20:00 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:20:01 Point started: ret=0 11:20:01 point_skyscan result=0 11:20:01 Check angles 11:20:01 SkyScan query 11:20:02 SkyScan query done: ret=0 az=134.565<-8971 ze=36.33<-9578 Statuses=0009 0009 11:20:02 Msec=0 True Az=134.565 Ze=36.33 Az status=0009 Ze status=0009 11:20:02 Check angles 11:20:02 SkyScan query 11:20:03 SkyScan query done: ret=0 az=116.745<-7783 ze=14.895<-11007 Statuses=0009 0009 11:20:03 Msec=750 True Az=116.745 Ze=14.895 Az status=0009 Ze status=0009 11:20:03 Check angles 11:20:03 SkyScan query 11:20:03 SkyScan query done: ret=0 az=99.285<-6619 ze=-6.06<-12404 Statuses=0009 0009 11:20:03 Msec=1500 True Az=99.285 Ze=-6.06 Az status=0009 Ze status=0009 11:20:04 Check angles 11:20:04 SkyScan query 11:20:04 SkyScan query done: ret=0 az=81.9<-5460 ze=-27.06<-13804 Statuses=0009 0009 11:20:04 Msec=2250 True Az=81.9 Ze=-27.06 Az status=0009 Ze status=0009 11:20:04 Check angles 11:20:04 SkyScan query 11:20:05 SkyScan query done: ret=0 az=63.915<-4261 ze=-38.58<-14572 Statuses=0009 0008 11:20:05 Msec=3000 True Az=63.915 Ze=-38.58 Az status=0009 Ze status=0008 11:20:05 Check angles 11:20:05 SkyScan query 11:20:06 SkyScan query done: ret=0 az=46.545<-3103 ze=-38.52<-14568 Statuses=0009 0008 11:20:06 Msec=3750 True Az=46.545 Ze=-38.52 Az status=0009 Ze status=0008 11:20:06 Check angles 11:20:06 SkyScan query 11:20:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:20:06 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:20:06 Message to Master queued w/err=0: serial=140879 error=0 11:20:11 Received message from Master: op=Filter serial=140880 11:20:11 Color wheel filter change from 0 to 0 11:20:11 FLIGetFilterPos err=0 currentPosition=0 11:20:11 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:11 Filter is already there-color wheel unchanged 11:20:12 Received message from Master: op=Shutter serial=140881 11:20:12 Shutter LASER close 11:20:12 Received message from Camera: op=State serial=140883 11:20:12 GetSingleValue result=40 Value=cccccccc 11:20:12 SkyScan query 11:20:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:20:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:12 Parameters OK 11:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:12 Set A/D data flow result=40 11:20:12 Set A/D channel type result=40 11:20:12 Set A/D encoding result=40 11:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:12 Set channel filter=0.000000e+000 result=40 11:20:12 Config A/D Result=40 11:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:12 Get A/D filter: -9.255963e+061 result=40 11:20:12 Get A/D value=-858993460 result=40 11:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:12 Parameters OK 11:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:12 Set A/D data flow result=40 11:20:12 Set A/D channel type result=40 11:20:12 Set A/D encoding result=40 11:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:12 Set channel filter=0.000000e+000 result=40 11:20:12 Config A/D Result=40 11:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:12 Get A/D filter: -9.255963e+061 result=40 11:20:12 Get A/D value=-858993460 result=40 11:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:12 Aux= 11:20:12 Message to Camera, serial 140883 queued 11:20:48 Received message from Master: op=PointingHead serial=140895 11:20:48 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:20:48 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:20:49 Point started: ret=0 11:20:49 point_skyscan result=0 11:20:49 Check angles 11:20:49 SkyScan query 11:20:50 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.37<-16558 Statuses=0009 0009 11:20:50 Msec=0 True Az=64.2 Ze=-68.37 Az status=0009 Ze status=0009 11:20:50 Check angles 11:20:50 SkyScan query 11:20:51 SkyScan query done: ret=0 az=82.05<-5470 ze=-89.82<-17988 Statuses=0009 0009 11:20:51 Msec=750 True Az=82.05 Ze=-89.82 Az status=0009 Ze status=0009 11:20:51 Check angles 11:20:51 SkyScan query 11:20:51 SkyScan query done: ret=0 az=99.48<-6632 ze=-110.775<-19385 Statuses=0009 0009 11:20:51 Msec=1500 True Az=99.48 Ze=-110.775 Az status=0009 Ze status=0009 11:20:52 Check angles 11:20:52 SkyScan query 11:20:52 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.655<-20777 Statuses=0009 0009 11:20:52 Msec=2250 True Az=117.045 Ze=-131.655 Az status=0009 Ze status=0009 11:20:52 Check angles 11:20:52 SkyScan query 11:20:53 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 11:20:53 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 11:20:53 Check angles 11:20:53 SkyScan query 11:20:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:20:54 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:20:54 Message to Master queued w/err=0: serial=140895 error=0 11:20:59 Received message from Master: op=Filter serial=140896 11:20:59 Color wheel filter change from 0 to 0 11:20:59 FLIGetFilterPos err=0 currentPosition=0 11:20:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:59 Filter is already there-color wheel unchanged 11:20:59 Received message from Master: op=Shutter serial=140897 11:20:59 Shutter LASER close 11:20:59 Received message from Camera: op=State serial=140899 11:20:59 GetSingleValue result=40 Value=cccccccc 11:20:59 SkyScan query 11:21:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:21:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:00 Parameters OK 11:21:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:00 Set A/D data flow result=40 11:21:00 Set A/D channel type result=40 11:21:00 Set A/D encoding result=40 11:21:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:00 Set channel filter=0.000000e+000 result=40 11:21:00 Config A/D Result=40 11:21:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:00 Get A/D filter: -9.255963e+061 result=40 11:21:00 Get A/D value=-858993460 result=40 11:21:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:00 Parameters OK 11:21:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:00 Set A/D data flow result=40 11:21:00 Set A/D channel type result=40 11:21:00 Set A/D encoding result=40 11:21:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:00 Set channel filter=0.000000e+000 result=40 11:21:00 Config A/D Result=40 11:21:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:00 Get A/D filter: -9.255963e+061 result=40 11:21:00 Get A/D value=-858993460 result=40 11:21:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:00 Aux= 11:21:00 Message to Camera, serial 140899 queued 11:21:36 Received message from Master: op=PointingHead serial=140912 11:21:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:21:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:21:37 Point started: ret=0 11:21:37 point_skyscan result=0 11:21:37 Check angles 11:21:37 SkyScan query 11:21:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.88<-23392 Statuses=0009 0009 11:21:38 Msec=0 True Az=113.01 Ze=-170.88 Az status=0009 Ze status=0009 11:21:38 Check angles 11:21:38 SkyScan query 11:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:21:39 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:21:39 Message to Master queued w/err=0: serial=140912 error=0 11:21:44 Received message from Master: op=Filter serial=140913 11:21:44 Color wheel filter change from 0 to 0 11:21:44 FLIGetFilterPos err=0 currentPosition=0 11:21:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:44 Filter is already there-color wheel unchanged 11:21:44 Received message from Master: op=Shutter serial=140914 11:21:44 Shutter LASER open 11:21:44 Received message from Camera: op=State serial=140916 11:21:44 GetSingleValue result=40 Value=cccccccc 11:21:44 SkyScan query 11:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:21:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:45 Parameters OK 11:21:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:45 Set A/D data flow result=40 11:21:45 Set A/D channel type result=40 11:21:45 Set A/D encoding result=40 11:21:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:45 Set channel filter=0.000000e+000 result=40 11:21:45 Config A/D Result=40 11:21:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:45 Get A/D filter: -9.255963e+061 result=40 11:21:45 Get A/D value=-858993460 result=40 11:21:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:45 Parameters OK 11:21:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:45 Set A/D data flow result=40 11:21:45 Set A/D channel type result=40 11:21:45 Set A/D encoding result=40 11:21:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:45 Set channel filter=0.000000e+000 result=40 11:21:45 Config A/D Result=40 11:21:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:45 Get A/D filter: -9.255963e+061 result=40 11:21:45 Get A/D value=-858993460 result=40 11:21:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:45 Aux= 11:21:45 Message to Camera, serial 140916 queued 11:21:53 Received message from Master: op=Shutter serial=140926 11:21:53 Shutter LASER close 11:21:54 Received message from Master: op=PointingHead serial=140930 11:21:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:21:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:21:54 Point started: ret=0 11:21:54 point_skyscan result=0 11:21:55 Check angles 11:21:55 SkyScan query 11:21:55 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.19<-21546 Statuses=0009 0009 11:21:55 Msec=0 True Az=136.005 Ze=-143.19 Az status=0009 Ze status=0009 11:21:56 Check angles 11:21:56 SkyScan query 11:21:56 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.205<-20147 Statuses=0009 0009 11:21:56 Msec=750 True Az=153.51 Ze=-122.205 Az status=0009 Ze status=0009 11:21:56 Check angles 11:21:56 SkyScan query 11:21:57 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.28<-18752 Statuses=0009 0009 11:21:57 Msec=1500 True Az=171.075 Ze=-101.28 Az status=0009 Ze status=0009 11:21:57 Check angles 11:21:57 SkyScan query 11:21:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.34<-17356 Statuses=0008 0009 11:21:58 Msec=2250 True Az=176.01 Ze=-80.34 Az status=0008 Ze status=0009 11:21:58 Check angles 11:21:58 SkyScan query 11:21:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.355<-15957 Statuses=0008 0009 11:21:58 Msec=3000 True Az=176.01 Ze=-59.355 Az status=0008 Ze status=0009 11:21:59 Check angles 11:21:59 SkyScan query 11:21:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:21:59 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:21:59 Message to Master queued w/err=0: serial=140930 error=0 11:22:04 Received message from Master: op=Filter serial=140931 11:22:04 Color wheel filter change from 0 to 0 11:22:04 FLIGetFilterPos err=0 currentPosition=0 11:22:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:04 Filter is already there-color wheel unchanged 11:22:04 Received message from Master: op=Shutter serial=140932 11:22:04 Shutter LASER close 11:22:04 Received message from Camera: op=State serial=140934 11:22:04 GetSingleValue result=40 Value=cccccccc 11:22:04 SkyScan query 11:22:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:22:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:05 Parameters OK 11:22:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:05 Set A/D data flow result=40 11:22:05 Set A/D channel type result=40 11:22:05 Set A/D encoding result=40 11:22:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:05 Set channel filter=0.000000e+000 result=40 11:22:05 Config A/D Result=40 11:22:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:05 Get A/D filter: -9.255963e+061 result=40 11:22:05 Get A/D value=-858993460 result=40 11:22:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:05 Parameters OK 11:22:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:05 Set A/D data flow result=40 11:22:05 Set A/D channel type result=40 11:22:05 Set A/D encoding result=40 11:22:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:05 Set channel filter=0.000000e+000 result=40 11:22:05 Config A/D Result=40 11:22:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:05 Get A/D filter: -9.255963e+061 result=40 11:22:05 Get A/D value=-858993460 result=40 11:22:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:05 Aux= 11:22:05 Message to Camera, serial 140934 queued 11:22:42 Received message from Master: op=PointingHead serial=140947 11:22:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:22:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:22:42 Point started: ret=0 11:22:42 point_skyscan result=0 11:22:43 Check angles 11:22:43 SkyScan query 11:22:44 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.05<-13470 Statuses=0009 0009 11:22:44 Msec=0 True Az=153.21 Ze=-22.05 Az status=0009 Ze status=0009 11:22:44 Check angles 11:22:44 SkyScan query 11:22:44 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.05<-12070 Statuses=0009 0009 11:22:44 Msec=750 True Az=135.78 Ze=-1.05 Az status=0009 Ze status=0009 11:22:44 Check angles 11:22:44 SkyScan query 11:22:45 SkyScan query done: ret=0 az=117.795<-7853 ze=20.34<-10644 Statuses=0009 0009 11:22:45 Msec=1500 True Az=117.795 Ze=20.34 Az status=0009 Ze status=0009 11:22:45 Check angles 11:22:45 SkyScan query 11:22:46 SkyScan query done: ret=0 az=100.44<-6696 ze=41.31<-9246 Statuses=0009 0009 11:22:46 Msec=2250 True Az=100.44 Ze=41.31 Az status=0009 Ze status=0009 11:22:46 Check angles 11:22:46 SkyScan query 11:22:47 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 11:22:47 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 11:22:47 Check angles 11:22:47 SkyScan query 11:22:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:22:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:22:47 Message to Master queued w/err=0: serial=140947 error=0 11:22:52 Received message from Master: op=Filter serial=140948 11:22:52 Color wheel filter change from 0 to 0 11:22:52 FLIGetFilterPos err=0 currentPosition=0 11:22:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:52 Filter is already there-color wheel unchanged 11:22:53 Received message from Master: op=Shutter serial=140949 11:22:53 Shutter LASER close 11:22:53 Received message from Camera: op=State serial=140951 11:22:53 GetSingleValue result=40 Value=cccccccc 11:22:53 SkyScan query 11:22:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:22:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:53 Parameters OK 11:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:53 Set A/D data flow result=40 11:22:53 Set A/D channel type result=40 11:22:53 Set A/D encoding result=40 11:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:53 Set channel filter=0.000000e+000 result=40 11:22:53 Config A/D Result=40 11:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:53 Get A/D filter: -9.255963e+061 result=40 11:22:53 Get A/D value=-858993460 result=40 11:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:53 Parameters OK 11:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:53 Set A/D data flow result=40 11:22:53 Set A/D channel type result=40 11:22:53 Set A/D encoding result=40 11:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:53 Set channel filter=0.000000e+000 result=40 11:22:53 Config A/D Result=40 11:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:53 Get A/D filter: -9.255963e+061 result=40 11:22:53 Get A/D value=-858993460 result=40 11:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:53 Aux= 11:22:53 Message to Camera, serial 140951 queued 11:23:30 Received message from Master: op=PointingHead serial=140964 11:23:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:23:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:23:30 Point started: ret=0 11:23:30 point_skyscan result=0 11:23:31 Check angles 11:23:31 SkyScan query 11:23:32 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 11:23:32 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 11:23:32 Check angles 11:23:32 SkyScan query 11:23:32 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 11:23:32 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 11:23:33 Check angles 11:23:33 SkyScan query 11:23:33 SkyScan query done: ret=0 az=144<-9600 ze=38.505<-9433 Statuses=0009 0008 11:23:33 Msec=1500 True Az=144 Ze=38.505 Az status=0009 Ze status=0008 11:23:33 Check angles 11:23:33 SkyScan query 11:23:34 SkyScan query done: ret=0 az=161.475<-10765 ze=38.505<-9433 Statuses=0009 0008 11:23:34 Msec=2250 True Az=161.475 Ze=38.505 Az status=0009 Ze status=0008 11:23:34 Check angles 11:23:34 SkyScan query 11:23:35 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:23:35 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:23:35 Check angles 11:23:35 SkyScan query 11:23:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:23:35 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:23:35 Message to Master queued w/err=0: serial=140964 error=0 11:23:40 Received message from Master: op=Filter serial=140965 11:23:40 Color wheel filter change from 0 to 0 11:23:40 FLIGetFilterPos err=0 currentPosition=0 11:23:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:40 Filter is already there-color wheel unchanged 11:23:41 Received message from Master: op=Shutter serial=140966 11:23:41 Shutter LASER close 11:23:41 Received message from Camera: op=State serial=140968 11:23:41 GetSingleValue result=40 Value=cccccccc 11:23:41 SkyScan query 11:23:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:23:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:41 Parameters OK 11:23:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:41 Set A/D data flow result=40 11:23:41 Set A/D channel type result=40 11:23:41 Set A/D encoding result=40 11:23:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:41 Set channel filter=0.000000e+000 result=40 11:23:41 Config A/D Result=40 11:23:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:41 Get A/D filter: -9.255963e+061 result=40 11:23:41 Get A/D value=-858993460 result=40 11:23:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:41 Parameters OK 11:23:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:41 Set A/D data flow result=40 11:23:41 Set A/D channel type result=40 11:23:41 Set A/D encoding result=40 11:23:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:41 Set channel filter=0.000000e+000 result=40 11:23:41 Config A/D Result=40 11:23:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:41 Get A/D filter: -9.255963e+061 result=40 11:23:41 Get A/D value=-858993460 result=40 11:23:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:41 Aux= 11:23:41 Message to Camera, serial 140968 queued 11:24:18 Received message from Master: op=PointingHead serial=140981 11:24:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:24:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:24:18 Point started: ret=0 11:24:18 point_skyscan result=0 11:24:19 Check angles 11:24:19 SkyScan query 11:24:20 SkyScan query done: ret=0 az=152.745<-10183 ze=8.22<-11452 Statuses=0009 0009 11:24:20 Msec=0 True Az=152.745 Ze=8.22 Az status=0009 Ze status=0009 11:24:20 Check angles 11:24:20 SkyScan query 11:24:20 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.495<-12833 Statuses=0009 0009 11:24:20 Msec=750 True Az=135.3 Ze=-12.495 Az status=0009 Ze status=0009 11:24:21 Check angles 11:24:21 SkyScan query 11:24:21 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.48<-14232 Statuses=0009 0009 11:24:21 Msec=1500 True Az=117.825 Ze=-33.48 Az status=0009 Ze status=0009 11:24:21 Check angles 11:24:21 SkyScan query 11:24:22 SkyScan query done: ret=0 az=100.47<-6698 ze=-51.555<-15437 Statuses=0009 0009 11:24:22 Msec=2250 True Az=100.47 Ze=-51.555 Az status=0009 Ze status=0009 11:24:22 Check angles 11:24:22 SkyScan query 11:24:23 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 11:24:23 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 11:24:23 Check angles 11:24:23 SkyScan query 11:24:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:24:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:24:23 Message to Master queued w/err=0: serial=140981 error=0 11:24:28 Received message from Master: op=Filter serial=140982 11:24:28 Color wheel filter change from 0 to 0 11:24:28 FLIGetFilterPos err=0 currentPosition=0 11:24:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:28 Filter is already there-color wheel unchanged 11:24:29 Received message from Master: op=Shutter serial=140983 11:24:29 Shutter LASER close 11:24:29 Received message from Camera: op=State serial=140985 11:24:29 GetSingleValue result=40 Value=cccccccc 11:24:29 SkyScan query 11:24:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:24:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:29 Parameters OK 11:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:29 Set A/D data flow result=40 11:24:29 Set A/D channel type result=40 11:24:29 Set A/D encoding result=40 11:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:29 Set channel filter=0.000000e+000 result=40 11:24:29 Config A/D Result=40 11:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:29 Get A/D filter: -9.255963e+061 result=40 11:24:29 Get A/D value=-858993460 result=40 11:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:29 Parameters OK 11:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:29 Set A/D data flow result=40 11:24:29 Set A/D channel type result=40 11:24:29 Set A/D encoding result=40 11:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:29 Set channel filter=0.000000e+000 result=40 11:24:29 Config A/D Result=40 11:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:29 Get A/D filter: -9.255963e+061 result=40 11:24:29 Get A/D value=-858993460 result=40 11:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:29 Aux= 11:24:29 Message to Camera, serial 140985 queued 11:25:06 Received message from Master: op=PointingHead serial=140998 11:25:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:25:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:25:06 Point started: ret=0 11:25:06 point_skyscan result=0 11:25:07 Check angles 11:25:07 SkyScan query 11:25:08 SkyScan query done: ret=0 az=109.32<-7288 ze=-81.72<-17448 Statuses=0009 0009 11:25:08 Msec=0 True Az=109.32 Ze=-81.72 Az status=0009 Ze status=0009 11:25:08 Check angles 11:25:08 SkyScan query 11:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.08<-18872 Statuses=0008 0009 11:25:09 Msec=750 True Az=112.995 Ze=-103.08 Az status=0008 Ze status=0009 11:25:09 Check angles 11:25:09 SkyScan query 11:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.455<-20297 Statuses=0008 0009 11:25:09 Msec=1500 True Az=112.995 Ze=-124.455 Az status=0008 Ze status=0009 11:25:10 Check angles 11:25:10 SkyScan query 11:25:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.44<-21696 Statuses=0008 0009 11:25:10 Msec=2250 True Az=112.995 Ze=-145.44 Az status=0008 Ze status=0009 11:25:10 Check angles 11:25:10 SkyScan query 11:25:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.83<-23122 Statuses=0008 0009 11:25:11 Msec=3000 True Az=112.995 Ze=-166.83 Az status=0008 Ze status=0009 11:25:11 Check angles 11:25:11 SkyScan query 11:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:25:12 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:25:12 Message to Master queued w/err=0: serial=140998 error=0 11:25:17 Received message from Master: op=Filter serial=140999 11:25:17 Color wheel filter change from 0 to 0 11:25:17 FLIGetFilterPos err=0 currentPosition=0 11:25:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:17 Filter is already there-color wheel unchanged 11:25:17 Received message from Master: op=Shutter serial=141000 11:25:17 Shutter LASER open 11:25:17 Received message from Camera: op=State serial=141002 11:25:17 GetSingleValue result=40 Value=cccccccc 11:25:17 SkyScan query 11:25:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:25:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:18 Parameters OK 11:25:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:18 Set A/D data flow result=40 11:25:18 Set A/D channel type result=40 11:25:18 Set A/D encoding result=40 11:25:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:18 Set channel filter=0.000000e+000 result=40 11:25:18 Config A/D Result=40 11:25:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:18 Get A/D filter: -9.255963e+061 result=40 11:25:18 Get A/D value=-858993460 result=40 11:25:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:18 Parameters OK 11:25:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:18 Set A/D data flow result=40 11:25:18 Set A/D channel type result=40 11:25:18 Set A/D encoding result=40 11:25:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:18 Set channel filter=0.000000e+000 result=40 11:25:18 Config A/D Result=40 11:25:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:18 Get A/D filter: -9.255963e+061 result=40 11:25:18 Get A/D value=-858993460 result=40 11:25:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:18 Aux= 11:25:18 Message to Camera, serial 141002 queued 11:25:26 Received message from Master: op=Shutter serial=141012 11:25:26 Shutter LASER close 11:25:26 Received message from Master: op=PointingHead serial=141016 11:25:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:25:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:25:27 Point started: ret=0 11:25:27 point_skyscan result=0 11:25:28 Check angles 11:25:28 SkyScan query 11:25:28 SkyScan query done: ret=0 az=90.06<-6004 ze=157.41<-1506 Statuses=0009 0009 11:25:28 Msec=0 True Az=90.06 Ze=157.41 Az status=0009 Ze status=0009 11:25:28 Check angles 11:25:28 SkyScan query 11:25:29 SkyScan query done: ret=0 az=72.615<-4841 ze=136.425<-2905 Statuses=0009 0009 11:25:29 Msec=750 True Az=72.615 Ze=136.425 Az status=0009 Ze status=0009 11:25:29 Check angles 11:25:29 SkyScan query 11:25:30 SkyScan query done: ret=0 az=55.14<-3676 ze=115.515<-4299 Statuses=0009 0009 11:25:30 Msec=1500 True Az=55.14 Ze=115.515 Az status=0009 Ze status=0009 11:25:30 Check angles 11:25:30 SkyScan query 11:25:30 SkyScan query done: ret=0 az=40.965<-2731 ze=94.5<-5700 Statuses=0009 0009 11:25:30 Msec=2250 True Az=40.965 Ze=94.5 Az status=0009 Ze status=0009 11:25:31 Check angles 11:25:31 SkyScan query 11:25:31 SkyScan query done: ret=0 az=40.995<-2733 ze=73.575<-7095 Statuses=0008 0009 11:25:31 Msec=3000 True Az=40.995 Ze=73.575 Az status=0008 Ze status=0009 11:25:31 Check angles 11:25:31 SkyScan query 11:25:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 11:25:32 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 11:25:32 Check angles 11:25:32 SkyScan query 11:25:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:25:33 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:25:33 Message to Master queued w/err=0: serial=141016 error=0 11:25:38 Received message from Master: op=Filter serial=141017 11:25:38 Color wheel filter change from 0 to 0 11:25:38 FLIGetFilterPos err=0 currentPosition=0 11:25:38 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:38 Filter is already there-color wheel unchanged 11:25:38 Received message from Master: op=Shutter serial=141018 11:25:38 Shutter LASER close 11:25:38 Received message from Camera: op=State serial=141020 11:25:38 GetSingleValue result=40 Value=cccccccc 11:25:38 SkyScan query 11:25:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:25:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:39 Parameters OK 11:25:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:39 Set A/D data flow result=40 11:25:39 Set A/D channel type result=40 11:25:39 Set A/D encoding result=40 11:25:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:39 Set channel filter=0.000000e+000 result=40 11:25:39 Config A/D Result=40 11:25:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:39 Get A/D filter: -9.255963e+061 result=40 11:25:39 Get A/D value=-858993460 result=40 11:25:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:39 Parameters OK 11:25:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:39 Set A/D data flow result=40 11:25:39 Set A/D channel type result=40 11:25:39 Set A/D encoding result=40 11:25:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:39 Set channel filter=0.000000e+000 result=40 11:25:39 Config A/D Result=40 11:25:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:39 Get A/D filter: -9.255963e+061 result=40 11:25:39 Get A/D value=-858993460 result=40 11:25:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:39 Aux= [UTC 2018-12-14 11:25:39] 11:25:39 Message to Camera, serial 141020 queued 11:26:15 Received message from Master: op=PointingHead serial=141033 11:26:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:26:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:26:16 Point started: ret=0 11:26:16 point_skyscan result=0 11:26:16 Check angles 11:26:16 SkyScan query 11:26:17 SkyScan query done: ret=0 az=64.32<-4288 ze=66.54<-7564 Statuses=0009 0008 11:26:17 Msec=0 True Az=64.32 Ze=66.54 Az status=0009 Ze status=0008 11:26:17 Check angles 11:26:17 SkyScan query 11:26:18 SkyScan query done: ret=0 az=82.23<-5482 ze=66.495<-7567 Statuses=0009 0008 11:26:18 Msec=750 True Az=82.23 Ze=66.495 Az status=0009 Ze status=0008 11:26:18 Check angles 11:26:18 SkyScan query 11:26:19 SkyScan query done: ret=0 az=99.63<-6642 ze=66.495<-7567 Statuses=0009 0008 11:26:19 Msec=1500 True Az=99.63 Ze=66.495 Az status=0009 Ze status=0008 11:26:19 Check angles 11:26:19 SkyScan query 11:26:19 SkyScan query done: ret=0 az=117.06<-7804 ze=66.495<-7567 Statuses=0009 0008 11:26:19 Msec=2250 True Az=117.06 Ze=66.495 Az status=0009 Ze status=0008 11:26:19 Check angles 11:26:19 SkyScan query 11:26:20 SkyScan query done: ret=0 az=134.58<-8972 ze=66.495<-7567 Statuses=0009 0008 11:26:20 Msec=3000 True Az=134.58 Ze=66.495 Az status=0009 Ze status=0008 11:26:20 Check angles 11:26:20 SkyScan query 11:26:21 SkyScan query done: ret=0 az=152.07<-10138 ze=66.495<-7567 Statuses=0009 0008 11:26:21 Msec=3750 True Az=152.07 Ze=66.495 Az status=0009 Ze status=0008 11:26:21 Check angles 11:26:21 SkyScan query 11:26:22 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:26:22 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:26:22 Message to Master queued w/err=0: serial=141033 error=0 11:26:27 Received message from Master: op=Filter serial=141034 11:26:27 Color wheel filter change from 0 to 0 11:26:27 FLIGetFilterPos err=0 currentPosition=0 11:26:27 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:27 Filter is already there-color wheel unchanged 11:26:27 Received message from Master: op=Shutter serial=141035 11:26:27 Shutter LASER close 11:26:27 Received message from Camera: op=State serial=141037 11:26:27 GetSingleValue result=40 Value=cccccccc 11:26:27 SkyScan query 11:26:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:26:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:27 Parameters OK 11:26:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:27 Set A/D data flow result=40 11:26:27 Set A/D channel type result=40 11:26:27 Set A/D encoding result=40 11:26:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:27 Set channel filter=0.000000e+000 result=40 11:26:27 Config A/D Result=40 11:26:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:27 Get A/D filter: -9.255963e+061 result=40 11:26:27 Get A/D value=-858993460 result=40 11:26:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:27 Parameters OK 11:26:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:27 Set A/D data flow result=40 11:26:27 Set A/D channel type result=40 11:26:27 Set A/D encoding result=40 11:26:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:27 Set channel filter=0.000000e+000 result=40 11:26:27 Config A/D Result=40 11:26:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:27 Get A/D filter: -9.255963e+061 result=40 11:26:27 Get A/D value=-858993460 result=40 11:26:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:27 Aux= 11:26:27 Message to Camera, serial 141037 queued 11:27:04 Received message from Master: op=PointingHead serial=141050 11:27:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:27:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:27:05 Point started: ret=0 11:27:05 point_skyscan result=0 11:27:05 Check angles 11:27:05 SkyScan query 11:27:06 SkyScan query done: ret=0 az=134.835<-8989 ze=36.57<-9562 Statuses=0009 0009 11:27:06 Msec=0 True Az=134.835 Ze=36.57 Az status=0009 Ze status=0009 11:27:06 Check angles 11:27:06 SkyScan query 11:27:07 SkyScan query done: ret=0 az=117.315<-7821 ze=15.66<-10956 Statuses=0009 0009 11:27:07 Msec=750 True Az=117.315 Ze=15.66 Az status=0009 Ze status=0009 11:27:07 Check angles 11:27:07 SkyScan query 11:27:07 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.355<-12357 Statuses=0009 0009 11:27:07 Msec=1500 True Az=99.915 Ze=-5.355 Az status=0009 Ze status=0009 11:27:08 Check angles 11:27:08 SkyScan query 11:27:08 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.805<-13787 Statuses=0009 0009 11:27:08 Msec=2250 True Az=82.14 Ze=-26.805 Az status=0009 Ze status=0009 11:27:08 Check angles 11:27:08 SkyScan query 11:27:09 SkyScan query done: ret=0 az=64.605<-4307 ze=-38.58<-14572 Statuses=0009 0008 11:27:09 Msec=3000 True Az=64.605 Ze=-38.58 Az status=0009 Ze status=0008 11:27:09 Check angles 11:27:09 SkyScan query 11:27:10 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.52<-14568 Statuses=0009 0008 11:27:10 Msec=3750 True Az=47.19 Ze=-38.52 Az status=0009 Ze status=0008 11:27:10 Check angles 11:27:10 SkyScan query 11:27:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:27:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:27:10 Message to Master queued w/err=0: serial=141050 error=0 11:27:15 Received message from Master: op=Filter serial=141051 11:27:15 Color wheel filter change from 0 to 0 11:27:15 FLIGetFilterPos err=0 currentPosition=0 11:27:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:15 Filter is already there-color wheel unchanged 11:27:16 Received message from Master: op=Shutter serial=141052 11:27:16 Shutter LASER close 11:27:16 Received message from Camera: op=State serial=141054 11:27:16 GetSingleValue result=40 Value=cccccccc 11:27:16 SkyScan query 11:27:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:27:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:16 Parameters OK 11:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:16 Set A/D data flow result=40 11:27:16 Set A/D channel type result=40 11:27:16 Set A/D encoding result=40 11:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:16 Set channel filter=0.000000e+000 result=40 11:27:16 Config A/D Result=40 11:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:16 Get A/D filter: -9.255963e+061 result=40 11:27:16 Get A/D value=-858993460 result=40 11:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:16 Parameters OK 11:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:16 Set A/D data flow result=40 11:27:16 Set A/D channel type result=40 11:27:16 Set A/D encoding result=40 11:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:16 Set channel filter=0.000000e+000 result=40 11:27:16 Config A/D Result=40 11:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:16 Get A/D filter: -9.255963e+061 result=40 11:27:16 Get A/D value=-858993460 result=40 11:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:16 Aux= 11:27:16 Message to Camera, serial 141054 queued 11:27:53 Received message from Master: op=PointingHead serial=141067 11:27:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:27:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:27:53 Point started: ret=0 11:27:53 point_skyscan result=0 11:27:54 Check angles 11:27:54 SkyScan query 11:27:55 SkyScan query done: ret=0 az=64.125<-4275 ze=-68.505<-16567 Statuses=0009 0009 11:27:55 Msec=0 True Az=64.125 Ze=-68.505 Az status=0009 Ze status=0009 11:27:55 Check angles 11:27:55 SkyScan query 11:27:55 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.49<-17966 Statuses=0009 0009 11:27:55 Msec=750 True Az=81.615 Ze=-89.49 Az status=0009 Ze status=0009 11:27:56 Check angles 11:27:56 SkyScan query 11:27:56 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.46<-19364 Statuses=0009 0009 11:27:56 Msec=1500 True Az=99.06 Ze=-110.46 Az status=0009 Ze status=0009 11:27:56 Check angles 11:27:56 SkyScan query 11:27:57 SkyScan query done: ret=0 az=117.03<-7802 ze=-131.775<-20785 Statuses=0009 0009 11:27:57 Msec=2250 True Az=117.03 Ze=-131.775 Az status=0009 Ze status=0009 11:27:57 Check angles 11:27:57 SkyScan query 11:27:58 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 11:27:58 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 11:27:58 Check angles 11:27:58 SkyScan query 11:27:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 11:27:58 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 11:27:58 Message to Master queued w/err=0: serial=141067 error=0 11:28:03 Received message from Master: op=Filter serial=141068 11:28:03 Color wheel filter change from 0 to 0 11:28:03 FLIGetFilterPos err=0 currentPosition=0 11:28:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:03 Filter is already there-color wheel unchanged 11:28:04 Received message from Master: op=Shutter serial=141069 11:28:04 Shutter LASER close 11:28:04 Received message from Camera: op=State serial=141071 11:28:04 GetSingleValue result=40 Value=cccccccc 11:28:04 SkyScan query 11:28:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:28:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:04 Parameters OK 11:28:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:04 Set A/D data flow result=40 11:28:04 Set A/D channel type result=40 11:28:04 Set A/D encoding result=40 11:28:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:04 Set channel filter=0.000000e+000 result=40 11:28:04 Config A/D Result=40 11:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:04 Get A/D filter: -9.255963e+061 result=40 11:28:04 Get A/D value=-858993460 result=40 11:28:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:04 Parameters OK 11:28:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:04 Set A/D data flow result=40 11:28:04 Set A/D channel type result=40 11:28:04 Set A/D encoding result=40 11:28:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:04 Set channel filter=0.000000e+000 result=40 11:28:04 Config A/D Result=40 11:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:04 Get A/D filter: -9.255963e+061 result=40 11:28:04 Get A/D value=-858993460 result=40 11:28:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:04 Aux= 11:28:04 Message to Camera, serial 141071 queued 11:28:41 Received message from Master: op=PointingHead serial=141084 11:28:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:28:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:28:41 Point started: ret=0 11:28:41 point_skyscan result=0 11:28:42 Check angles 11:28:42 SkyScan query 11:28:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 11:28:43 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 11:28:43 Check angles 11:28:43 SkyScan query 11:28:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:28:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:28:44 Message to Master queued w/err=0: serial=141084 error=0 11:28:49 Received message from Master: op=Filter serial=141085 11:28:49 Color wheel filter change from 0 to 0 11:28:49 FLIGetFilterPos err=0 currentPosition=0 11:28:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:49 Filter is already there-color wheel unchanged 11:28:49 Received message from Master: op=Shutter serial=141086 11:28:49 Shutter LASER open 11:28:49 Received message from Camera: op=State serial=141088 11:28:49 GetSingleValue result=40 Value=cccccccc 11:28:49 SkyScan query 11:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:28:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:49 Parameters OK 11:28:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:49 Set A/D data flow result=40 11:28:49 Set A/D channel type result=40 11:28:49 Set A/D encoding result=40 11:28:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:49 Set channel filter=0.000000e+000 result=40 11:28:49 Config A/D Result=40 11:28:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:49 Get A/D filter: -9.255963e+061 result=40 11:28:49 Get A/D value=-858993460 result=40 11:28:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:49 Parameters OK 11:28:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:49 Set A/D data flow result=40 11:28:49 Set A/D channel type result=40 11:28:49 Set A/D encoding result=40 11:28:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:49 Set channel filter=0.000000e+000 result=40 11:28:49 Config A/D Result=40 11:28:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:49 Get A/D filter: -9.255963e+061 result=40 11:28:49 Get A/D value=-858993460 result=40 11:28:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:49 Aux= 11:28:49 Message to Camera, serial 141088 queued 11:28:58 Received message from Master: op=Shutter serial=141098 11:28:58 Shutter LASER close 11:28:58 Received message from Master: op=PointingHead serial=141102 11:28:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:28:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:28:59 Point started: ret=0 11:28:59 point_skyscan result=0 11:29:00 Check angles 11:29:00 SkyScan query 11:29:00 SkyScan query done: ret=0 az=136.17<-9078 ze=-142.995<-21533 Statuses=0009 0009 11:29:00 Msec=0 True Az=136.17 Ze=-142.995 Az status=0009 Ze status=0009 11:29:00 Check angles 11:29:00 SkyScan query 11:29:01 SkyScan query done: ret=0 az=154.02<-10268 ze=-121.605<-20107 Statuses=0009 0009 11:29:01 Msec=750 True Az=154.02 Ze=-121.605 Az status=0009 Ze status=0009 11:29:01 Check angles 11:29:01 SkyScan query 11:29:02 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.59<-18706 Statuses=0009 0009 11:29:02 Msec=1500 True Az=171.525 Ze=-100.59 Az status=0009 Ze status=0009 11:29:02 Check angles 11:29:02 SkyScan query 11:29:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.665<-17311 Statuses=0008 0009 11:29:02 Msec=2250 True Az=176.01 Ze=-79.665 Az status=0008 Ze status=0009 11:29:03 Check angles 11:29:03 SkyScan query 11:29:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.23<-15882 Statuses=0008 0009 11:29:03 Msec=3000 True Az=176.01 Ze=-58.23 Az status=0008 Ze status=0009 11:29:03 Check angles 11:29:03 SkyScan query 11:29:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:29:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:29:04 Message to Master queued w/err=0: serial=141102 error=0 11:29:09 Received message from Master: op=Filter serial=141103 11:29:09 Color wheel filter change from 0 to 0 11:29:09 FLIGetFilterPos err=0 currentPosition=0 11:29:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:09 Filter is already there-color wheel unchanged 11:29:09 Received message from Master: op=Shutter serial=141104 11:29:09 Shutter LASER close 11:29:09 Received message from Camera: op=State serial=141106 11:29:09 GetSingleValue result=40 Value=cccccccc 11:29:09 SkyScan query 11:29:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:29:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:10 Parameters OK 11:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:10 Set A/D data flow result=40 11:29:10 Set A/D channel type result=40 11:29:10 Set A/D encoding result=40 11:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:10 Set channel filter=0.000000e+000 result=40 11:29:10 Config A/D Result=40 11:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:10 Get A/D filter: -9.255963e+061 result=40 11:29:10 Get A/D value=-858993460 result=40 11:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:10 Parameters OK 11:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:10 Set A/D data flow result=40 11:29:10 Set A/D channel type result=40 11:29:10 Set A/D encoding result=40 11:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:10 Set channel filter=0.000000e+000 result=40 11:29:10 Config A/D Result=40 11:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:10 Get A/D filter: -9.255963e+061 result=40 11:29:10 Get A/D value=-858993460 result=40 11:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:10 Aux= 11:29:10 Message to Camera, serial 141106 queued 11:29:46 Received message from Master: op=PointingHead serial=141118 11:29:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:29:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:29:46 Point started: ret=0 11:29:46 point_skyscan result=0 11:29:47 Check angles 11:29:47 SkyScan query 11:29:47 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.405<-13427 Statuses=0009 0009 11:29:47 Msec=0 True Az=152.775 Ze=-21.405 Az status=0009 Ze status=0009 11:29:48 Check angles 11:29:48 SkyScan query 11:29:48 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.465<-12031 Statuses=0009 0009 11:29:48 Msec=750 True Az=135.27 Ze=-0.465 Az status=0009 Ze status=0009 11:29:48 Check angles 11:29:48 SkyScan query 11:29:49 SkyScan query done: ret=0 az=117.405<-7827 ze=20.985<-10601 Statuses=0009 0009 11:29:49 Msec=1500 True Az=117.405 Ze=20.985 Az status=0009 Ze status=0009 11:29:49 Check angles 11:29:49 SkyScan query 11:29:50 SkyScan query done: ret=0 az=100.005<-6667 ze=41.91<-9206 Statuses=0009 0009 11:29:50 Msec=2250 True Az=100.005 Ze=41.91 Az status=0009 Ze status=0009 11:29:50 Check angles 11:29:50 SkyScan query 11:29:50 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 11:29:50 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 11:29:51 Check angles 11:29:51 SkyScan query 11:29:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:29:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:29:51 Message to Master queued w/err=0: serial=141118 error=0 11:29:56 Received message from Master: op=Filter serial=141119 11:29:56 Color wheel filter change from 0 to 0 11:29:56 FLIGetFilterPos err=0 currentPosition=0 11:29:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:56 Filter is already there-color wheel unchanged 11:29:56 Received message from Master: op=Shutter serial=141120 11:29:56 Shutter LASER close 11:29:56 Received message from Camera: op=State serial=141122 11:29:56 GetSingleValue result=40 Value=cccccccc 11:29:56 SkyScan query 11:29:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:29:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:57 Parameters OK 11:29:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:57 Set A/D data flow result=40 11:29:57 Set A/D channel type result=40 11:29:57 Set A/D encoding result=40 11:29:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:57 Set channel filter=0.000000e+000 result=40 11:29:57 Config A/D Result=40 11:29:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:57 Get A/D filter: -9.255963e+061 result=40 11:29:57 Get A/D value=-858993460 result=40 11:29:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:57 Parameters OK 11:29:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:57 Set A/D data flow result=40 11:29:57 Set A/D channel type result=40 11:29:57 Set A/D encoding result=40 11:29:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:57 Set channel filter=0.000000e+000 result=40 11:29:57 Config A/D Result=40 11:29:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:57 Get A/D filter: -9.255963e+061 result=40 11:29:57 Get A/D value=-858993460 result=40 11:29:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:57 Aux= 11:29:57 Message to Camera, serial 141122 queued 11:30:34 Received message from Master: op=PointingHead serial=141135 11:30:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:30:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:30:34 Point started: ret=0 11:30:34 point_skyscan result=0 11:30:35 Check angles 11:30:35 SkyScan query 11:30:36 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 11:30:36 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 11:30:36 Check angles 11:30:36 SkyScan query 11:30:36 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 11:30:36 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 11:30:36 Check angles 11:30:36 SkyScan query 11:30:37 SkyScan query done: ret=0 az=144.075<-9605 ze=38.505<-9433 Statuses=0009 0008 11:30:37 Msec=1500 True Az=144.075 Ze=38.505 Az status=0009 Ze status=0008 11:30:37 Check angles 11:30:37 SkyScan query 11:30:38 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 11:30:38 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 11:30:38 Check angles 11:30:38 SkyScan query 11:30:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 11:30:39 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 11:30:39 Check angles 11:30:39 SkyScan query 11:30:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:30:39 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:30:39 Message to Master queued w/err=0: serial=141135 error=0 11:30:44 Received message from Master: op=Filter serial=141136 11:30:44 Color wheel filter change from 0 to 0 11:30:44 FLIGetFilterPos err=0 currentPosition=0 11:30:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:44 Filter is already there-color wheel unchanged 11:30:45 Received message from Master: op=Shutter serial=141137 11:30:45 Shutter LASER close 11:30:45 Received message from Camera: op=State serial=141139 11:30:45 GetSingleValue result=40 Value=cccccccc 11:30:45 SkyScan query 11:30:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:30:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:45 Parameters OK 11:30:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:45 Set A/D data flow result=40 11:30:45 Set A/D channel type result=40 11:30:45 Set A/D encoding result=40 11:30:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:45 Set channel filter=0.000000e+000 result=40 11:30:45 Config A/D Result=40 11:30:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:45 Get A/D filter: -9.255963e+061 result=40 11:30:45 Get A/D value=-858993460 result=40 11:30:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:45 Parameters OK 11:30:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:45 Set A/D data flow result=40 11:30:45 Set A/D channel type result=40 11:30:45 Set A/D encoding result=40 11:30:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:45 Set channel filter=0.000000e+000 result=40 11:30:45 Config A/D Result=40 11:30:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:45 Get A/D filter: -9.255963e+061 result=40 11:30:45 Get A/D value=-858993460 result=40 11:30:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:45 Aux= 11:30:45 Message to Camera, serial 141139 queued 11:31:22 Received message from Master: op=PointingHead serial=141152 11:31:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:31:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:31:22 Point started: ret=0 11:31:22 point_skyscan result=0 11:31:23 Check angles 11:31:23 SkyScan query 11:31:24 SkyScan query done: ret=0 az=153.105<-10207 ze=8.835<-11411 Statuses=0009 0009 11:31:24 Msec=0 True Az=153.105 Ze=8.835 Az status=0009 Ze status=0009 11:31:24 Check angles 11:31:24 SkyScan query 11:31:24 SkyScan query done: ret=0 az=135.63<-9042 ze=-12.135<-12809 Statuses=0009 0009 11:31:24 Msec=750 True Az=135.63 Ze=-12.135 Az status=0009 Ze status=0009 11:31:25 Check angles 11:31:25 SkyScan query 11:31:25 SkyScan query done: ret=0 az=118.11<-7874 ze=-33.075<-14205 Statuses=0009 0009 11:31:25 Msec=1500 True Az=118.11 Ze=-33.075 Az status=0009 Ze status=0009 11:31:25 Check angles 11:31:25 SkyScan query 11:31:26 SkyScan query done: ret=0 az=100.74<-6716 ze=-51.525<-15435 Statuses=0009 0009 11:31:26 Msec=2250 True Az=100.74 Ze=-51.525 Az status=0009 Ze status=0009 11:31:26 Check angles 11:31:26 SkyScan query 11:31:27 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 11:31:27 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 11:31:27 Check angles 11:31:27 SkyScan query 11:31:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:31:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:31:27 Message to Master queued w/err=0: serial=141152 error=0 11:31:32 Received message from Master: op=Filter serial=141153 11:31:32 Color wheel filter change from 0 to 0 11:31:32 FLIGetFilterPos err=0 currentPosition=0 11:31:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:32 Filter is already there-color wheel unchanged 11:31:33 Received message from Master: op=Shutter serial=141154 11:31:33 Shutter LASER close 11:31:33 Received message from Camera: op=State serial=141156 11:31:33 GetSingleValue result=40 Value=cccccccc 11:31:33 SkyScan query 11:31:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:31:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:33 Parameters OK 11:31:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:33 Set A/D data flow result=40 11:31:33 Set A/D channel type result=40 11:31:33 Set A/D encoding result=40 11:31:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:33 Set channel filter=0.000000e+000 result=40 11:31:33 Config A/D Result=40 11:31:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:33 Get A/D filter: -9.255963e+061 result=40 11:31:33 Get A/D value=-858993460 result=40 11:31:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:33 Parameters OK 11:31:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:33 Set A/D data flow result=40 11:31:33 Set A/D channel type result=40 11:31:33 Set A/D encoding result=40 11:31:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:33 Set channel filter=0.000000e+000 result=40 11:31:33 Config A/D Result=40 11:31:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:33 Get A/D filter: -9.255963e+061 result=40 11:31:33 Get A/D value=-858993460 result=40 11:31:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:33 Aux= 11:31:33 Message to Camera, serial 141156 queued 11:32:10 Received message from Master: op=PointingHead serial=141169 11:32:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:32:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:32:10 Point started: ret=0 11:32:10 point_skyscan result=0 11:32:11 Check angles 11:32:11 SkyScan query 11:32:12 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.48<-17432 Statuses=0009 0009 11:32:12 Msec=0 True Az=109.14 Ze=-81.48 Az status=0009 Ze status=0009 11:32:12 Check angles 11:32:12 SkyScan query 11:32:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.39<-18826 Statuses=0008 0009 11:32:12 Msec=750 True Az=112.995 Ze=-102.39 Az status=0008 Ze status=0009 11:32:13 Check angles 11:32:13 SkyScan query 11:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.81<-20254 Statuses=0008 0009 11:32:13 Msec=1500 True Az=112.995 Ze=-123.81 Az status=0008 Ze status=0009 11:32:13 Check angles 11:32:13 SkyScan query 11:32:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.72<-21648 Statuses=0008 0009 11:32:14 Msec=2250 True Az=112.995 Ze=-144.72 Az status=0008 Ze status=0009 11:32:14 Check angles 11:32:14 SkyScan query 11:32:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.675<-23045 Statuses=0008 0009 11:32:15 Msec=3000 True Az=112.995 Ze=-165.675 Az status=0008 Ze status=0009 11:32:15 Check angles 11:32:15 SkyScan query 11:32:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:32:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:32:15 Message to Master queued w/err=0: serial=141169 error=0 11:32:20 Received message from Master: op=Filter serial=141170 11:32:20 Color wheel filter change from 0 to 0 11:32:20 FLIGetFilterPos err=0 currentPosition=0 11:32:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:20 Filter is already there-color wheel unchanged 11:32:21 Received message from Master: op=Shutter serial=141171 11:32:21 Shutter LASER open 11:32:21 Received message from Camera: op=State serial=141173 11:32:21 GetSingleValue result=40 Value=cccccccc 11:32:21 SkyScan query 11:32:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:32:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:21 Parameters OK 11:32:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:21 Set A/D data flow result=40 11:32:21 Set A/D channel type result=40 11:32:21 Set A/D encoding result=40 11:32:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:21 Set channel filter=0.000000e+000 result=40 11:32:21 Config A/D Result=40 11:32:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:21 Get A/D filter: -9.255963e+061 result=40 11:32:21 Get A/D value=-858993460 result=40 11:32:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:21 Parameters OK 11:32:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:21 Set A/D data flow result=40 11:32:21 Set A/D channel type result=40 11:32:21 Set A/D encoding result=40 11:32:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:21 Set channel filter=0.000000e+000 result=40 11:32:21 Config A/D Result=40 11:32:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:21 Get A/D filter: -9.255963e+061 result=40 11:32:21 Get A/D value=-858993460 result=40 11:32:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:21 Aux= 11:32:21 Message to Camera, serial 141173 queued 11:32:30 Received message from Master: op=Shutter serial=141183 11:32:30 Shutter LASER close 11:32:30 Received message from Master: op=PointingHead serial=141187 11:32:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:32:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:32:31 Point started: ret=0 11:32:31 point_skyscan result=0 11:32:31 Check angles 11:32:31 SkyScan query 11:32:32 SkyScan query done: ret=0 az=89.82<-5988 ze=157.305<-1513 Statuses=0009 0009 11:32:32 Msec=0 True Az=89.82 Ze=157.305 Az status=0009 Ze status=0009 11:32:32 Check angles 11:32:32 SkyScan query 11:32:33 SkyScan query done: ret=0 az=72.255<-4817 ze=136.29<-2914 Statuses=0009 0009 11:32:33 Msec=750 True Az=72.255 Ze=136.29 Az status=0009 Ze status=0009 11:32:33 Check angles 11:32:33 SkyScan query 11:32:33 SkyScan query done: ret=0 az=54.555<-3637 ze=114.915<-4339 Statuses=0009 0009 11:32:33 Msec=1500 True Az=54.555 Ze=114.915 Az status=0009 Ze status=0009 11:32:34 Check angles 11:32:34 SkyScan query 11:32:34 SkyScan query done: ret=0 az=40.98<-2732 ze=93.975<-5735 Statuses=0009 0009 11:32:34 Msec=2250 True Az=40.98 Ze=93.975 Az status=0009 Ze status=0009 11:32:34 Check angles 11:32:34 SkyScan query 11:32:35 SkyScan query done: ret=0 az=40.995<-2733 ze=73.005<-7133 Statuses=0008 0009 11:32:35 Msec=3000 True Az=40.995 Ze=73.005 Az status=0008 Ze status=0009 11:32:35 Check angles 11:32:35 SkyScan query 11:32:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 11:32:36 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 11:32:36 Check angles 11:32:36 SkyScan query 11:32:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:32:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:32:36 Message to Master queued w/err=0: serial=141187 error=0 11:32:41 Received message from Master: op=Filter serial=141188 11:32:41 Color wheel filter change from 0 to 0 11:32:41 FLIGetFilterPos err=0 currentPosition=0 11:32:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:41 Filter is already there-color wheel unchanged 11:32:42 Received message from Master: op=Shutter serial=141189 11:32:42 Shutter LASER close 11:32:42 Received message from Camera: op=State serial=141191 11:32:42 GetSingleValue result=40 Value=cccccccc 11:32:42 SkyScan query 11:32:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:32:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:42 Parameters OK 11:32:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:42 Set A/D data flow result=40 11:32:42 Set A/D channel type result=40 11:32:42 Set A/D encoding result=40 11:32:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:42 Set channel filter=0.000000e+000 result=40 11:32:42 Config A/D Result=40 11:32:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:42 Get A/D filter: -9.255963e+061 result=40 11:32:42 Get A/D value=-858993460 result=40 11:32:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:42 Parameters OK 11:32:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:42 Set A/D data flow result=40 11:32:42 Set A/D channel type result=40 11:32:42 Set A/D encoding result=40 11:32:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:42 Set channel filter=0.000000e+000 result=40 11:32:42 Config A/D Result=40 11:32:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:42 Get A/D filter: -9.255963e+061 result=40 11:32:42 Get A/D value=-858993460 result=40 11:32:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:42 Aux= 11:32:42 Message to Camera, serial 141191 queued 11:33:19 Received message from Master: op=PointingHead serial=141204 11:33:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:33:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:33:20 Point started: ret=0 11:33:20 point_skyscan result=0 11:33:20 Check angles 11:33:20 SkyScan query 11:33:21 SkyScan query done: ret=0 az=63.93<-4262 ze=66.555<-7563 Statuses=0009 0008 11:33:21 Msec=0 True Az=63.93 Ze=66.555 Az status=0009 Ze status=0008 11:33:21 Check angles 11:33:21 SkyScan query 11:33:22 SkyScan query done: ret=0 az=81.825<-5455 ze=66.51<-7566 Statuses=0009 0008 11:33:22 Msec=750 True Az=81.825 Ze=66.51 Az status=0009 Ze status=0008 11:33:22 Check angles 11:33:22 SkyScan query 11:33:22 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 11:33:22 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 11:33:23 Check angles 11:33:23 SkyScan query 11:33:23 SkyScan query done: ret=0 az=116.835<-7789 ze=66.495<-7567 Statuses=0009 0008 11:33:23 Msec=2250 True Az=116.835 Ze=66.495 Az status=0009 Ze status=0008 11:33:23 Check angles 11:33:23 SkyScan query 11:33:24 SkyScan query done: ret=0 az=134.34<-8956 ze=66.495<-7567 Statuses=0009 0008 11:33:24 Msec=3000 True Az=134.34 Ze=66.495 Az status=0009 Ze status=0008 11:33:24 Check angles 11:33:24 SkyScan query 11:33:25 SkyScan query done: ret=0 az=151.68<-10112 ze=66.495<-7567 Statuses=0009 0008 11:33:25 Msec=3750 True Az=151.68 Ze=66.495 Az status=0009 Ze status=0008 11:33:25 Check angles 11:33:25 SkyScan query 11:33:25 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:33:25 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:33:25 Message to Master queued w/err=0: serial=141204 error=0 11:33:30 Received message from Master: op=Filter serial=141205 11:33:30 Color wheel filter change from 0 to 0 11:33:30 FLIGetFilterPos err=0 currentPosition=0 11:33:30 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:30 Filter is already there-color wheel unchanged 11:33:31 Received message from Master: op=Shutter serial=141206 11:33:31 Shutter LASER close 11:33:31 Received message from Camera: op=State serial=141208 11:33:31 GetSingleValue result=40 Value=cccccccc 11:33:31 SkyScan query 11:33:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:33:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:31 Parameters OK 11:33:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:31 Set A/D data flow result=40 11:33:31 Set A/D channel type result=40 11:33:31 Set A/D encoding result=40 11:33:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:31 Set channel filter=0.000000e+000 result=40 11:33:31 Config A/D Result=40 11:33:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:31 Get A/D filter: -9.255963e+061 result=40 11:33:31 Get A/D value=-858993460 result=40 11:33:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:31 Parameters OK 11:33:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:31 Set A/D data flow result=40 11:33:31 Set A/D channel type result=40 11:33:31 Set A/D encoding result=40 11:33:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:31 Set channel filter=0.000000e+000 result=40 11:33:31 Config A/D Result=40 11:33:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:31 Get A/D filter: -9.255963e+061 result=40 11:33:31 Get A/D value=-858993460 result=40 11:33:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:31 Aux= 11:33:31 Message to Camera, serial 141208 queued 11:34:08 Received message from Master: op=PointingHead serial=141221 11:34:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:34:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:34:08 Point started: ret=0 11:34:08 point_skyscan result=0 11:34:09 Check angles 11:34:09 SkyScan query 11:34:10 SkyScan query done: ret=0 az=134.595<-8973 ze=36.345<-9577 Statuses=0009 0009 11:34:10 Msec=0 True Az=134.595 Ze=36.345 Az status=0009 Ze status=0009 11:34:10 Check angles 11:34:10 SkyScan query 11:34:10 SkyScan query done: ret=0 az=117.105<-7807 ze=15.45<-10970 Statuses=0009 0009 11:34:10 Msec=750 True Az=117.105 Ze=15.45 Az status=0009 Ze status=0009 11:34:11 Check angles 11:34:11 SkyScan query 11:34:11 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.58<-12372 Statuses=0009 0009 11:34:11 Msec=1500 True Az=99.84 Ze=-5.58 Az status=0009 Ze status=0009 11:34:11 Check angles 11:34:11 SkyScan query 11:34:12 SkyScan query done: ret=0 az=81.975<-5465 ze=-27.03<-13802 Statuses=0009 0009 11:34:12 Msec=2250 True Az=81.975 Ze=-27.03 Az status=0009 Ze status=0009 11:34:12 Check angles 11:34:12 SkyScan query 11:34:13 SkyScan query done: ret=0 az=64.47<-4298 ze=-38.58<-14572 Statuses=0009 0008 11:34:13 Msec=3000 True Az=64.47 Ze=-38.58 Az status=0009 Ze status=0008 11:34:13 Check angles 11:34:13 SkyScan query 11:34:13 SkyScan query done: ret=0 az=46.89<-3126 ze=-38.52<-14568 Statuses=0009 0008 11:34:13 Msec=3750 True Az=46.89 Ze=-38.52 Az status=0009 Ze status=0008 11:34:14 Check angles 11:34:14 SkyScan query 11:34:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:34:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:34:14 Message to Master queued w/err=0: serial=141221 error=0 11:34:19 Received message from Master: op=Filter serial=141222 11:34:19 Color wheel filter change from 0 to 0 11:34:19 FLIGetFilterPos err=0 currentPosition=0 11:34:19 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:19 Filter is already there-color wheel unchanged 11:34:19 Received message from Master: op=Shutter serial=141223 11:34:19 Shutter LASER close 11:34:19 Received message from Camera: op=State serial=141225 11:34:19 GetSingleValue result=40 Value=cccccccc 11:34:19 SkyScan query 11:34:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:34:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:20 Parameters OK 11:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:20 Set A/D data flow result=40 11:34:20 Set A/D channel type result=40 11:34:20 Set A/D encoding result=40 11:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:20 Set channel filter=0.000000e+000 result=40 11:34:20 Config A/D Result=40 11:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:20 Get A/D filter: -9.255963e+061 result=40 11:34:20 Get A/D value=-858993460 result=40 11:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:20 Parameters OK 11:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:20 Set A/D data flow result=40 11:34:20 Set A/D channel type result=40 11:34:20 Set A/D encoding result=40 11:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:20 Set channel filter=0.000000e+000 result=40 11:34:20 Config A/D Result=40 11:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:20 Get A/D filter: -9.255963e+061 result=40 11:34:20 Get A/D value=-858993460 result=40 11:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:20 Aux= 11:34:20 Message to Camera, serial 141225 queued 11:34:56 Received message from Master: op=PointingHead serial=141237 11:34:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:34:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:34:56 Point started: ret=0 11:34:56 point_skyscan result=0 11:34:57 Check angles 11:34:57 SkyScan query 11:34:58 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.385<-16559 Statuses=0009 0009 11:34:58 Msec=0 True Az=64.005 Ze=-68.385 Az status=0009 Ze status=0009 11:34:58 Check angles 11:34:58 SkyScan query 11:34:58 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.76<-17984 Statuses=0009 0009 11:34:58 Msec=750 True Az=81.9 Ze=-89.76 Az status=0009 Ze status=0009 11:34:59 Check angles 11:34:59 SkyScan query 11:34:59 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.76<-19384 Statuses=0009 0009 11:34:59 Msec=1500 True Az=99.375 Ze=-110.76 Az status=0009 Ze status=0009 11:34:59 Check angles 11:34:59 SkyScan query 11:35:00 SkyScan query done: ret=0 az=116.85<-7790 ze=-131.64<-20776 Statuses=0009 0009 11:35:00 Msec=2250 True Az=116.85 Ze=-131.64 Az status=0009 Ze status=0009 11:35:00 Check angles 11:35:00 SkyScan query 11:35:01 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 11:35:01 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 11:35:01 Check angles 11:35:01 SkyScan query 11:35:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:35:01 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:35:01 Message to Master queued w/err=0: serial=141237 error=0 11:35:06 Received message from Master: op=Filter serial=141238 11:35:06 Color wheel filter change from 0 to 0 11:35:06 FLIGetFilterPos err=0 currentPosition=0 11:35:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:06 Filter is already there-color wheel unchanged 11:35:07 Received message from Master: op=Shutter serial=141239 11:35:07 Shutter LASER close 11:35:07 Received message from Camera: op=State serial=141241 11:35:07 GetSingleValue result=40 Value=cccccccc 11:35:07 SkyScan query 11:35:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:35:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:07 Parameters OK 11:35:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:07 Set A/D data flow result=40 11:35:07 Set A/D channel type result=40 11:35:07 Set A/D encoding result=40 11:35:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:07 Set channel filter=0.000000e+000 result=40 11:35:07 Config A/D Result=40 11:35:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:07 Get A/D filter: -9.255963e+061 result=40 11:35:07 Get A/D value=-858993460 result=40 11:35:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:07 Parameters OK 11:35:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:07 Set A/D data flow result=40 11:35:07 Set A/D channel type result=40 11:35:07 Set A/D encoding result=40 11:35:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:07 Set channel filter=0.000000e+000 result=40 11:35:07 Config A/D Result=40 11:35:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:07 Get A/D filter: -9.255963e+061 result=40 11:35:07 Get A/D value=-858993460 result=40 11:35:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:07 Aux= 11:35:07 Message to Camera, serial 141241 queued 11:35:44 Received message from Master: op=PointingHead serial=141254 11:35:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:35:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:35:44 Point started: ret=0 11:35:44 point_skyscan result=0 11:35:45 Check angles 11:35:45 SkyScan query 11:35:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0009 0009 11:35:46 Msec=0 True Az=112.995 Ze=-171.435 Az status=0009 Ze status=0009 11:35:46 Check angles 11:35:46 SkyScan query 11:35:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:35:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:35:46 Message to Master queued w/err=0: serial=141254 error=0 11:35:51 Received message from Master: op=Filter serial=141255 11:35:51 Color wheel filter change from 0 to 0 11:35:51 FLIGetFilterPos err=0 currentPosition=0 11:35:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:51 Filter is already there-color wheel unchanged 11:35:52 Received message from Master: op=Shutter serial=141256 11:35:52 Shutter LASER open 11:35:52 Received message from Camera: op=State serial=141258 11:35:52 GetSingleValue result=40 Value=cccccccc 11:35:52 SkyScan query 11:35:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:35:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:52 Parameters OK 11:35:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:52 Set A/D data flow result=40 11:35:52 Set A/D channel type result=40 11:35:52 Set A/D encoding result=40 11:35:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:52 Set channel filter=0.000000e+000 result=40 11:35:52 Config A/D Result=40 11:35:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:52 Get A/D filter: -9.255963e+061 result=40 11:35:52 Get A/D value=-858993460 result=40 11:35:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:52 Parameters OK 11:35:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:52 Set A/D data flow result=40 11:35:52 Set A/D channel type result=40 11:35:52 Set A/D encoding result=40 11:35:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:52 Set channel filter=0.000000e+000 result=40 11:35:52 Config A/D Result=40 11:35:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:52 Get A/D filter: -9.255963e+061 result=40 11:35:52 Get A/D value=-858993460 result=40 11:35:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:52 Aux= 11:35:52 Message to Camera, serial 141258 queued [UTC 2018-12-14 11:35:52] 11:36:01 Received message from Master: op=Shutter serial=141268 11:36:01 Shutter LASER close 11:36:01 Received message from Master: op=PointingHead serial=141272 11:36:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:36:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:36:02 Point started: ret=0 11:36:02 point_skyscan result=0 11:36:03 Check angles 11:36:03 SkyScan query 11:36:03 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.025<-21535 Statuses=0009 0009 11:36:03 Msec=0 True Az=136.17 Ze=-143.025 Az status=0009 Ze status=0009 11:36:03 Check angles 11:36:03 SkyScan query 11:36:04 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.055<-20137 Statuses=0009 0009 11:36:04 Msec=750 True Az=153.615 Ze=-122.055 Az status=0009 Ze status=0009 11:36:04 Check angles 11:36:04 SkyScan query 11:36:05 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.085<-18739 Statuses=0009 0009 11:36:05 Msec=1500 True Az=171.105 Ze=-101.085 Az status=0009 Ze status=0009 11:36:05 Check angles 11:36:05 SkyScan query 11:36:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.205<-17347 Statuses=0008 0009 11:36:05 Msec=2250 True Az=176.01 Ze=-80.205 Az status=0008 Ze status=0009 11:36:06 Check angles 11:36:06 SkyScan query 11:36:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.22<-15948 Statuses=0008 0009 11:36:06 Msec=3000 True Az=176.01 Ze=-59.22 Az status=0008 Ze status=0009 11:36:06 Check angles 11:36:06 SkyScan query 11:36:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:36:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:36:07 Message to Master queued w/err=0: serial=141272 error=0 11:36:12 Received message from Master: op=Filter serial=141273 11:36:12 Color wheel filter change from 0 to 0 11:36:12 FLIGetFilterPos err=0 currentPosition=0 11:36:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:12 Filter is already there-color wheel unchanged 11:36:12 Received message from Master: op=Shutter serial=141274 11:36:12 Shutter LASER close 11:36:12 Received message from Camera: op=State serial=141276 11:36:12 GetSingleValue result=40 Value=cccccccc 11:36:12 SkyScan query 11:36:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:36:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:13 Parameters OK 11:36:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:13 Set A/D data flow result=40 11:36:13 Set A/D channel type result=40 11:36:13 Set A/D encoding result=40 11:36:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:13 Set channel filter=0.000000e+000 result=40 11:36:13 Config A/D Result=40 11:36:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:13 Get A/D filter: -9.255963e+061 result=40 11:36:13 Get A/D value=-858993460 result=40 11:36:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:13 Parameters OK 11:36:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:13 Set A/D data flow result=40 11:36:13 Set A/D channel type result=40 11:36:13 Set A/D encoding result=40 11:36:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:13 Set channel filter=0.000000e+000 result=40 11:36:13 Config A/D Result=40 11:36:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:13 Get A/D filter: -9.255963e+061 result=40 11:36:13 Get A/D value=-858993460 result=40 11:36:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:13 Aux= 11:36:13 Message to Camera, serial 141276 queued 11:36:49 Received message from Master: op=PointingHead serial=141288 11:36:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:36:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:36:49 Point started: ret=0 11:36:49 point_skyscan result=0 11:36:50 Check angles 11:36:50 SkyScan query 11:36:50 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.57<-13438 Statuses=0009 0009 11:36:50 Msec=0 True Az=152.76 Ze=-21.57 Az status=0009 Ze status=0009 11:36:51 Check angles 11:36:51 SkyScan query 11:36:51 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.615<-12041 Statuses=0009 0009 11:36:51 Msec=750 True Az=135.315 Ze=-0.615 Az status=0009 Ze status=0009 11:36:51 Check angles 11:36:51 SkyScan query 11:36:52 SkyScan query done: ret=0 az=117.435<-7829 ze=20.835<-10611 Statuses=0009 0009 11:36:52 Msec=1500 True Az=117.435 Ze=20.835 Az status=0009 Ze status=0009 11:36:52 Check angles 11:36:52 SkyScan query 11:36:53 SkyScan query done: ret=0 az=100.08<-6672 ze=41.745<-9217 Statuses=0009 0009 11:36:53 Msec=2250 True Az=100.08 Ze=41.745 Az status=0009 Ze status=0009 11:36:53 Check angles 11:36:53 SkyScan query 11:36:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 11:36:53 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 11:36:54 Check angles 11:36:54 SkyScan query 11:36:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:36:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:36:54 Message to Master queued w/err=0: serial=141288 error=0 11:36:59 Received message from Master: op=Filter serial=141289 11:36:59 Color wheel filter change from 0 to 0 11:36:59 FLIGetFilterPos err=0 currentPosition=0 11:36:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:59 Filter is already there-color wheel unchanged 11:36:59 Received message from Master: op=Shutter serial=141290 11:36:59 Shutter LASER close 11:36:59 Received message from Camera: op=State serial=141292 11:36:59 GetSingleValue result=40 Value=cccccccc 11:36:59 SkyScan query 11:37:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:37:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:00 Parameters OK 11:37:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:00 Set A/D data flow result=40 11:37:00 Set A/D channel type result=40 11:37:00 Set A/D encoding result=40 11:37:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:00 Set channel filter=0.000000e+000 result=40 11:37:00 Config A/D Result=40 11:37:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:00 Get A/D filter: -9.255963e+061 result=40 11:37:00 Get A/D value=-858993460 result=40 11:37:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:00 Parameters OK 11:37:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:00 Set A/D data flow result=40 11:37:00 Set A/D channel type result=40 11:37:00 Set A/D encoding result=40 11:37:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:00 Set channel filter=0.000000e+000 result=40 11:37:00 Config A/D Result=40 11:37:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:00 Get A/D filter: -9.255963e+061 result=40 11:37:00 Get A/D value=-858993460 result=40 11:37:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:00 Aux= 11:37:00 Message to Camera, serial 141292 queued 11:37:37 Received message from Master: op=PointingHead serial=141305 11:37:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:37:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:37:37 Point started: ret=0 11:37:37 point_skyscan result=0 11:37:38 Check angles 11:37:38 SkyScan query 11:37:38 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 11:37:38 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 11:37:39 Check angles 11:37:39 SkyScan query 11:37:39 SkyScan query done: ret=0 az=126.945<-8463 ze=38.505<-9433 Statuses=0009 0008 11:37:39 Msec=750 True Az=126.945 Ze=38.505 Az status=0009 Ze status=0008 11:37:39 Check angles 11:37:39 SkyScan query 11:37:40 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 11:37:40 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 11:37:40 Check angles 11:37:40 SkyScan query 11:37:41 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 11:37:41 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 11:37:41 Check angles 11:37:41 SkyScan query 11:37:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:37:41 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:37:42 Check angles 11:37:42 SkyScan query 11:37:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:37:42 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:37:42 Message to Master queued w/err=0: serial=141305 error=0 11:37:47 Received message from Master: op=Filter serial=141306 11:37:47 Color wheel filter change from 0 to 0 11:37:47 FLIGetFilterPos err=0 currentPosition=0 11:37:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:47 Filter is already there-color wheel unchanged 11:37:47 Received message from Master: op=Shutter serial=141307 11:37:47 Shutter LASER close 11:37:47 Received message from Camera: op=State serial=141309 11:37:47 GetSingleValue result=40 Value=cccccccc 11:37:47 SkyScan query 11:37:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:37:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:48 Parameters OK 11:37:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:48 Set A/D data flow result=40 11:37:48 Set A/D channel type result=40 11:37:48 Set A/D encoding result=40 11:37:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:48 Set channel filter=0.000000e+000 result=40 11:37:48 Config A/D Result=40 11:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:48 Get A/D filter: -9.255963e+061 result=40 11:37:48 Get A/D value=-858993460 result=40 11:37:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:48 Parameters OK 11:37:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:48 Set A/D data flow result=40 11:37:48 Set A/D channel type result=40 11:37:48 Set A/D encoding result=40 11:37:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:48 Set channel filter=0.000000e+000 result=40 11:37:48 Config A/D Result=40 11:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:48 Get A/D filter: -9.255963e+061 result=40 11:37:48 Get A/D value=-858993460 result=40 11:37:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:48 Aux= 11:37:48 Message to Camera, serial 141309 queued 11:38:25 Received message from Master: op=PointingHead serial=141322 11:38:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:38:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:38:25 Point started: ret=0 11:38:25 point_skyscan result=0 11:38:26 Check angles 11:38:26 SkyScan query 11:38:27 SkyScan query done: ret=0 az=152.64<-10176 ze=8.16<-11456 Statuses=0009 0009 11:38:27 Msec=0 True Az=152.64 Ze=8.16 Az status=0009 Ze status=0009 11:38:27 Check angles 11:38:27 SkyScan query 11:38:27 SkyScan query done: ret=0 az=134.565<-8971 ze=-13.17<-12878 Statuses=0009 0009 11:38:27 Msec=750 True Az=134.565 Ze=-13.17 Az status=0009 Ze status=0009 11:38:27 Check angles 11:38:27 SkyScan query 11:38:28 SkyScan query done: ret=0 az=117.27<-7818 ze=-34.14<-14276 Statuses=0009 0009 11:38:28 Msec=1500 True Az=117.27 Ze=-34.14 Az status=0009 Ze status=0009 11:38:28 Check angles 11:38:28 SkyScan query 11:38:29 SkyScan query done: ret=0 az=99.75<-6650 ze=-51.57<-15438 Statuses=0009 0009 11:38:29 Msec=2250 True Az=99.75 Ze=-51.57 Az status=0009 Ze status=0009 11:38:29 Check angles 11:38:29 SkyScan query 11:38:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 11:38:30 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 11:38:30 Check angles 11:38:30 SkyScan query 11:38:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:38:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:38:30 Message to Master queued w/err=0: serial=141322 error=0 11:38:35 Received message from Master: op=Filter serial=141323 11:38:35 Color wheel filter change from 0 to 0 11:38:35 FLIGetFilterPos err=0 currentPosition=0 11:38:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:35 Filter is already there-color wheel unchanged 11:38:35 Received message from Master: op=Shutter serial=141324 11:38:35 Shutter LASER close 11:38:36 Received message from Camera: op=State serial=141326 11:38:36 GetSingleValue result=40 Value=cccccccc 11:38:36 SkyScan query 11:38:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:38:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:36 Parameters OK 11:38:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:36 Set A/D data flow result=40 11:38:36 Set A/D channel type result=40 11:38:36 Set A/D encoding result=40 11:38:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:36 Set channel filter=0.000000e+000 result=40 11:38:36 Config A/D Result=40 11:38:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:36 Get A/D filter: -9.255963e+061 result=40 11:38:36 Get A/D value=-858993460 result=40 11:38:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:36 Parameters OK 11:38:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:36 Set A/D data flow result=40 11:38:36 Set A/D channel type result=40 11:38:36 Set A/D encoding result=40 11:38:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:36 Set channel filter=0.000000e+000 result=40 11:38:36 Config A/D Result=40 11:38:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:36 Get A/D filter: -9.255963e+061 result=40 11:38:36 Get A/D value=-858993460 result=40 11:38:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:36 Aux= 11:38:36 Message to Camera, serial 141326 queued 11:39:13 Received message from Master: op=PointingHead serial=141339 11:39:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:39:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:39:13 Point started: ret=0 11:39:13 point_skyscan result=0 11:39:14 Check angles 11:39:14 SkyScan query 11:39:15 SkyScan query done: ret=0 az=109.11<-7274 ze=-81.36<-17424 Statuses=0009 0009 11:39:15 Msec=0 True Az=109.11 Ze=-81.36 Az status=0009 Ze status=0009 11:39:15 Check angles 11:39:15 SkyScan query 11:39:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.315<-18821 Statuses=0008 0009 11:39:15 Msec=750 True Az=112.995 Ze=-102.315 Az status=0008 Ze status=0009 11:39:16 Check angles 11:39:16 SkyScan query 11:39:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.285<-20219 Statuses=0008 0009 11:39:16 Msec=1500 True Az=112.995 Ze=-123.285 Az status=0008 Ze status=0009 11:39:16 Check angles 11:39:16 SkyScan query 11:39:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.21<-21614 Statuses=0008 0009 11:39:17 Msec=2250 True Az=112.995 Ze=-144.21 Az status=0008 Ze status=0009 11:39:17 Check angles 11:39:17 SkyScan query 11:39:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.15<-23010 Statuses=0008 0009 11:39:18 Msec=3000 True Az=112.995 Ze=-165.15 Az status=0008 Ze status=0009 11:39:18 Check angles 11:39:18 SkyScan query 11:39:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 11:39:18 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 11:39:18 Message to Master queued w/err=0: serial=141339 error=0 11:39:23 Received message from Master: op=Filter serial=141340 11:39:23 Color wheel filter change from 0 to 0 11:39:23 FLIGetFilterPos err=0 currentPosition=0 11:39:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:23 Filter is already there-color wheel unchanged 11:39:24 Received message from Master: op=Shutter serial=141341 11:39:24 Shutter LASER open 11:39:24 Received message from Camera: op=State serial=141343 11:39:24 GetSingleValue result=40 Value=cccccccc 11:39:24 SkyScan query 11:39:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:39:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:24 Parameters OK 11:39:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:24 Set A/D data flow result=40 11:39:24 Set A/D channel type result=40 11:39:24 Set A/D encoding result=40 11:39:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:24 Set channel filter=0.000000e+000 result=40 11:39:24 Config A/D Result=40 11:39:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:24 Get A/D filter: -9.255963e+061 result=40 11:39:24 Get A/D value=-858993460 result=40 11:39:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:24 Parameters OK 11:39:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:24 Set A/D data flow result=40 11:39:24 Set A/D channel type result=40 11:39:24 Set A/D encoding result=40 11:39:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:24 Set channel filter=0.000000e+000 result=40 11:39:24 Config A/D Result=40 11:39:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:24 Get A/D filter: -9.255963e+061 result=40 11:39:24 Get A/D value=-858993460 result=40 11:39:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:24 Aux= 11:39:24 Message to Camera, serial 141343 queued 11:39:33 Received message from Master: op=Shutter serial=141353 11:39:33 Shutter LASER close 11:39:33 Received message from Master: op=PointingHead serial=141357 11:39:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:39:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:39:34 Point started: ret=0 11:39:34 point_skyscan result=0 11:39:34 Check angles 11:39:34 SkyScan query 11:39:35 SkyScan query done: ret=0 az=90<-6000 ze=157.365<-1509 Statuses=0009 0009 11:39:35 Msec=0 True Az=90 Ze=157.365 Az status=0009 Ze status=0009 11:39:35 Check angles 11:39:35 SkyScan query 11:39:36 SkyScan query done: ret=0 az=72.075<-4805 ze=135.87<-2942 Statuses=0009 0009 11:39:36 Msec=750 True Az=72.075 Ze=135.87 Az status=0009 Ze status=0009 11:39:36 Check angles 11:39:36 SkyScan query 11:39:36 SkyScan query done: ret=0 az=54.75<-3650 ze=115.005<-4333 Statuses=0009 0009 11:39:36 Msec=1500 True Az=54.75 Ze=115.005 Az status=0009 Ze status=0009 11:39:37 Check angles 11:39:37 SkyScan query 11:39:37 SkyScan query done: ret=0 az=40.98<-2732 ze=94.035<-5731 Statuses=0009 0009 11:39:37 Msec=2250 True Az=40.98 Ze=94.035 Az status=0009 Ze status=0009 11:39:37 Check angles 11:39:37 SkyScan query 11:39:38 SkyScan query done: ret=0 az=40.995<-2733 ze=72.615<-7159 Statuses=0008 0009 11:39:38 Msec=3000 True Az=40.995 Ze=72.615 Az status=0008 Ze status=0009 11:39:38 Check angles 11:39:38 SkyScan query 11:39:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 11:39:39 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 11:39:39 Check angles 11:39:39 SkyScan query 11:39:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:39:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:39:39 Message to Master queued w/err=0: serial=141357 error=0 11:39:44 Received message from Master: op=Filter serial=141358 11:39:44 Color wheel filter change from 0 to 0 11:39:44 FLIGetFilterPos err=0 currentPosition=0 11:39:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:44 Filter is already there-color wheel unchanged 11:39:45 Received message from Master: op=Shutter serial=141359 11:39:45 Shutter LASER close 11:39:45 Received message from Camera: op=State serial=141361 11:39:45 GetSingleValue result=40 Value=cccccccc 11:39:45 SkyScan query 11:39:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:39:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:45 Parameters OK 11:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:45 Set A/D data flow result=40 11:39:45 Set A/D channel type result=40 11:39:45 Set A/D encoding result=40 11:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:45 Set channel filter=0.000000e+000 result=40 11:39:45 Config A/D Result=40 11:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:45 Get A/D filter: -9.255963e+061 result=40 11:39:45 Get A/D value=-858993460 result=40 11:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:45 Parameters OK 11:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:45 Set A/D data flow result=40 11:39:45 Set A/D channel type result=40 11:39:45 Set A/D encoding result=40 11:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:45 Set channel filter=0.000000e+000 result=40 11:39:45 Config A/D Result=40 11:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:45 Get A/D filter: -9.255963e+061 result=40 11:39:45 Get A/D value=-858993460 result=40 11:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:45 Aux= 11:39:45 Message to Camera, serial 141361 queued 11:40:22 Received message from Master: op=PointingHead serial=141374 11:40:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:40:22 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:40:23 Point started: ret=0 11:40:23 point_skyscan result=0 11:40:23 Check angles 11:40:23 SkyScan query 11:40:24 SkyScan query done: ret=0 az=63.795<-4253 ze=66.555<-7563 Statuses=0009 0008 11:40:24 Msec=0 True Az=63.795 Ze=66.555 Az status=0009 Ze status=0008 11:40:24 Check angles 11:40:24 SkyScan query 11:40:25 SkyScan query done: ret=0 az=81.345<-5423 ze=66.495<-7567 Statuses=0009 0008 11:40:25 Msec=750 True Az=81.345 Ze=66.495 Az status=0009 Ze status=0008 11:40:25 Check angles 11:40:25 SkyScan query 11:40:25 SkyScan query done: ret=0 az=98.79<-6586 ze=66.495<-7567 Statuses=0009 0008 11:40:25 Msec=1500 True Az=98.79 Ze=66.495 Az status=0009 Ze status=0008 11:40:26 Check angles 11:40:26 SkyScan query 11:40:26 SkyScan query done: ret=0 az=116.235<-7749 ze=66.495<-7567 Statuses=0009 0008 11:40:26 Msec=2250 True Az=116.235 Ze=66.495 Az status=0009 Ze status=0008 11:40:26 Check angles 11:40:26 SkyScan query 11:40:27 SkyScan query done: ret=0 az=133.815<-8921 ze=66.495<-7567 Statuses=0009 0008 11:40:27 Msec=3000 True Az=133.815 Ze=66.495 Az status=0009 Ze status=0008 11:40:27 Check angles 11:40:27 SkyScan query 11:40:28 SkyScan query done: ret=0 az=151.125<-10075 ze=66.495<-7567 Statuses=0009 0008 11:40:28 Msec=3750 True Az=151.125 Ze=66.495 Az status=0009 Ze status=0008 11:40:28 Check angles 11:40:28 SkyScan query 11:40:28 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:40:28 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:40:28 Message to Master queued w/err=0: serial=141374 error=0 11:40:33 Received message from Master: op=Filter serial=141375 11:40:33 Color wheel filter change from 0 to 0 11:40:33 FLIGetFilterPos err=0 currentPosition=0 11:40:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:33 Filter is already there-color wheel unchanged 11:40:34 Received message from Master: op=Shutter serial=141376 11:40:34 Shutter LASER close 11:40:34 Received message from Camera: op=State serial=141378 11:40:34 GetSingleValue result=40 Value=cccccccc 11:40:34 SkyScan query 11:40:34 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:40:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:34 Parameters OK 11:40:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:34 Set A/D data flow result=40 11:40:34 Set A/D channel type result=40 11:40:34 Set A/D encoding result=40 11:40:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:34 Set channel filter=0.000000e+000 result=40 11:40:34 Config A/D Result=40 11:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:34 Get A/D filter: -9.255963e+061 result=40 11:40:34 Get A/D value=-858993460 result=40 11:40:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:34 Parameters OK 11:40:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:34 Set A/D data flow result=40 11:40:34 Set A/D channel type result=40 11:40:34 Set A/D encoding result=40 11:40:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:34 Set channel filter=0.000000e+000 result=40 11:40:34 Config A/D Result=40 11:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:34 Get A/D filter: -9.255963e+061 result=40 11:40:34 Get A/D value=-858993460 result=40 11:40:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:34 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:34 Aux= 11:40:34 Message to Camera, serial 141378 queued 11:41:11 Received message from Master: op=PointingHead serial=141391 11:41:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:41:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:41:11 Point started: ret=0 11:41:11 point_skyscan result=0 11:41:12 Check angles 11:41:12 SkyScan query 11:41:13 SkyScan query done: ret=0 az=135.105<-9007 ze=36.855<-9543 Statuses=0009 0009 11:41:13 Msec=0 True Az=135.105 Ze=36.855 Az status=0009 Ze status=0009 11:41:13 Check angles 11:41:13 SkyScan query 11:41:13 SkyScan query done: ret=0 az=117.585<-7839 ze=15.915<-10939 Statuses=0009 0009 11:41:13 Msec=750 True Az=117.585 Ze=15.915 Az status=0009 Ze status=0009 11:41:14 Check angles 11:41:14 SkyScan query 11:41:14 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.055<-12337 Statuses=0009 0009 11:41:14 Msec=1500 True Az=100.2 Ze=-5.055 Az status=0009 Ze status=0009 11:41:14 Check angles 11:41:14 SkyScan query 11:41:15 SkyScan query done: ret=0 az=82.695<-5513 ze=-25.995<-13733 Statuses=0009 0009 11:41:15 Msec=2250 True Az=82.695 Ze=-25.995 Az status=0009 Ze status=0009 11:41:15 Check angles 11:41:15 SkyScan query 11:41:16 SkyScan query done: ret=0 az=65.265<-4351 ze=-38.595<-14573 Statuses=0009 0008 11:41:16 Msec=3000 True Az=65.265 Ze=-38.595 Az status=0009 Ze status=0008 11:41:16 Check angles 11:41:16 SkyScan query 11:41:16 SkyScan query done: ret=0 az=47.79<-3186 ze=-38.52<-14568 Statuses=0009 0008 11:41:16 Msec=3750 True Az=47.79 Ze=-38.52 Az status=0009 Ze status=0008 11:41:17 Check angles 11:41:17 SkyScan query 11:41:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:41:17 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:41:17 Message to Master queued w/err=0: serial=141391 error=0 11:41:22 Received message from Master: op=Filter serial=141392 11:41:22 Color wheel filter change from 0 to 0 11:41:22 FLIGetFilterPos err=0 currentPosition=0 11:41:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:22 Filter is already there-color wheel unchanged 11:41:22 Received message from Master: op=Shutter serial=141393 11:41:22 Shutter LASER close 11:41:22 Received message from Camera: op=State serial=141395 11:41:22 GetSingleValue result=40 Value=cccccccc 11:41:22 SkyScan query 11:41:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:41:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:23 Parameters OK 11:41:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:23 Set A/D data flow result=40 11:41:23 Set A/D channel type result=40 11:41:23 Set A/D encoding result=40 11:41:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:23 Set channel filter=0.000000e+000 result=40 11:41:23 Config A/D Result=40 11:41:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:23 Get A/D filter: -9.255963e+061 result=40 11:41:23 Get A/D value=-858993460 result=40 11:41:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:23 Parameters OK 11:41:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:23 Set A/D data flow result=40 11:41:23 Set A/D channel type result=40 11:41:23 Set A/D encoding result=40 11:41:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:23 Set channel filter=0.000000e+000 result=40 11:41:23 Config A/D Result=40 11:41:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:23 Get A/D filter: -9.255963e+061 result=40 11:41:23 Get A/D value=-858993460 result=40 11:41:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:23 Aux= 11:41:23 Message to Camera, serial 141395 queued 11:42:00 Received message from Master: op=PointingHead serial=141408 11:42:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:42:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:42:00 Point started: ret=0 11:42:00 point_skyscan result=0 11:42:01 Check angles 11:42:01 SkyScan query 11:42:01 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.19<-16546 Statuses=0009 0009 11:42:01 Msec=0 True Az=63.84 Ze=-68.19 Az status=0009 Ze status=0009 11:42:02 Check angles 11:42:02 SkyScan query 11:42:02 SkyScan query done: ret=0 az=81.765<-5451 ze=-89.595<-17973 Statuses=0009 0009 11:42:02 Msec=750 True Az=81.765 Ze=-89.595 Az status=0009 Ze status=0009 11:42:02 Check angles 11:42:02 SkyScan query 11:42:03 SkyScan query done: ret=0 az=99.51<-6634 ze=-110.985<-19399 Statuses=0009 0009 11:42:03 Msec=1500 True Az=99.51 Ze=-110.985 Az status=0009 Ze status=0009 11:42:03 Check angles 11:42:03 SkyScan query 11:42:04 SkyScan query done: ret=0 az=117.405<-7827 ze=-132.33<-20822 Statuses=0009 0009 11:42:04 Msec=2250 True Az=117.405 Ze=-132.33 Az status=0009 Ze status=0009 11:42:04 Check angles 11:42:04 SkyScan query 11:42:04 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 11:42:04 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 11:42:05 Check angles 11:42:05 SkyScan query 11:42:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:42:05 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:42:05 Message to Master queued w/err=0: serial=141408 error=0 11:42:10 Received message from Master: op=Filter serial=141409 11:42:10 Color wheel filter change from 0 to 0 11:42:10 FLIGetFilterPos err=0 currentPosition=0 11:42:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:10 Filter is already there-color wheel unchanged 11:42:10 Received message from Master: op=Shutter serial=141410 11:42:10 Shutter LASER close 11:42:10 Received message from Camera: op=State serial=141412 11:42:10 GetSingleValue result=40 Value=cccccccc 11:42:10 SkyScan query 11:42:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:42:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:11 Parameters OK 11:42:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:11 Set A/D data flow result=40 11:42:11 Set A/D channel type result=40 11:42:11 Set A/D encoding result=40 11:42:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:11 Set channel filter=0.000000e+000 result=40 11:42:11 Config A/D Result=40 11:42:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:11 Get A/D filter: -9.255963e+061 result=40 11:42:11 Get A/D value=-858993460 result=40 11:42:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:11 Parameters OK 11:42:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:11 Set A/D data flow result=40 11:42:11 Set A/D channel type result=40 11:42:11 Set A/D encoding result=40 11:42:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:11 Set channel filter=0.000000e+000 result=40 11:42:11 Config A/D Result=40 11:42:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:11 Get A/D filter: -9.255963e+061 result=40 11:42:11 Get A/D value=-858993460 result=40 11:42:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:11 Aux= 11:42:11 Message to Camera, serial 141412 queued 11:42:48 Received message from Master: op=PointingHead serial=141425 11:42:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:42:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:42:48 Point started: ret=0 11:42:48 point_skyscan result=0 11:42:49 Check angles 11:42:49 SkyScan query 11:42:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 11:42:50 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 11:42:50 Check angles 11:42:50 SkyScan query 11:42:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:42:50 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:42:50 Message to Master queued w/err=0: serial=141425 error=0 11:42:55 Received message from Master: op=Filter serial=141426 11:42:55 Color wheel filter change from 0 to 0 11:42:55 FLIGetFilterPos err=0 currentPosition=0 11:42:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:55 Filter is already there-color wheel unchanged 11:42:55 Received message from Master: op=Shutter serial=141427 11:42:55 Shutter LASER open 11:42:56 Received message from Camera: op=State serial=141429 11:42:56 GetSingleValue result=40 Value=cccccccc 11:42:56 SkyScan query 11:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:42:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:56 Parameters OK 11:42:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:56 Set A/D data flow result=40 11:42:56 Set A/D channel type result=40 11:42:56 Set A/D encoding result=40 11:42:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:56 Set channel filter=0.000000e+000 result=40 11:42:56 Config A/D Result=40 11:42:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:56 Get A/D filter: -9.255963e+061 result=40 11:42:56 Get A/D value=-858993460 result=40 11:42:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:56 Parameters OK 11:42:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:56 Set A/D data flow result=40 11:42:56 Set A/D channel type result=40 11:42:56 Set A/D encoding result=40 11:42:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:56 Set channel filter=0.000000e+000 result=40 11:42:56 Config A/D Result=40 11:42:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:56 Get A/D filter: -9.255963e+061 result=40 11:42:56 Get A/D value=-858993460 result=40 11:42:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:56 Aux= 11:42:56 Message to Camera, serial 141429 queued 11:43:05 Received message from Master: op=Shutter serial=141439 11:43:05 Shutter LASER close 11:43:05 Received message from Master: op=PointingHead serial=141443 11:43:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:43:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:43:06 Point started: ret=0 11:43:06 point_skyscan result=0 11:43:06 Check angles 11:43:06 SkyScan query 11:43:07 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.295<-21553 Statuses=0009 0009 11:43:07 Msec=0 True Az=136.17 Ze=-143.295 Az status=0009 Ze status=0009 11:43:07 Check angles 11:43:07 SkyScan query 11:43:08 SkyScan query done: ret=0 az=154.035<-10269 ze=-121.875<-20125 Statuses=0009 0009 11:43:08 Msec=750 True Az=154.035 Ze=-121.875 Az status=0009 Ze status=0009 11:43:08 Check angles 11:43:08 SkyScan query 11:43:08 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.875<-18725 Statuses=0009 0009 11:43:08 Msec=1500 True Az=171.495 Ze=-100.875 Az status=0009 Ze status=0009 11:43:09 Check angles 11:43:09 SkyScan query 11:43:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.98<-17332 Statuses=0008 0009 11:43:09 Msec=2250 True Az=176.01 Ze=-79.98 Az status=0008 Ze status=0009 11:43:09 Check angles 11:43:09 SkyScan query 11:43:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.01<-15934 Statuses=0008 0009 11:43:10 Msec=3000 True Az=175.995 Ze=-59.01 Az status=0008 Ze status=0009 11:43:10 Check angles 11:43:10 SkyScan query 11:43:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:43:11 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:43:11 Message to Master queued w/err=0: serial=141443 error=0 11:43:16 Received message from Master: op=Filter serial=141444 11:43:16 Color wheel filter change from 0 to 0 11:43:16 FLIGetFilterPos err=0 currentPosition=0 11:43:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:16 Filter is already there-color wheel unchanged 11:43:16 Received message from Master: op=Shutter serial=141445 11:43:16 Shutter LASER close 11:43:16 Received message from Camera: op=State serial=141447 11:43:16 GetSingleValue result=40 Value=cccccccc 11:43:16 SkyScan query 11:43:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:43:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:17 Parameters OK 11:43:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:17 Set A/D data flow result=40 11:43:17 Set A/D channel type result=40 11:43:17 Set A/D encoding result=40 11:43:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:17 Set channel filter=0.000000e+000 result=40 11:43:17 Config A/D Result=40 11:43:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:17 Get A/D filter: -9.255963e+061 result=40 11:43:17 Get A/D value=-858993460 result=40 11:43:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:17 Parameters OK 11:43:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:17 Set A/D data flow result=40 11:43:17 Set A/D channel type result=40 11:43:17 Set A/D encoding result=40 11:43:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:17 Set channel filter=0.000000e+000 result=40 11:43:17 Config A/D Result=40 11:43:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:17 Get A/D filter: -9.255963e+061 result=40 11:43:17 Get A/D value=-858993460 result=40 11:43:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:17 Aux= 11:43:17 Message to Camera, serial 141447 queued 11:43:53 Received message from Master: op=PointingHead serial=141460 11:43:53 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:43:53 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:43:54 Point started: ret=0 11:43:54 point_skyscan result=0 11:43:55 Check angles 11:43:55 SkyScan query 11:43:55 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.87<-13458 Statuses=0009 0009 11:43:55 Msec=0 True Az=152.97 Ze=-21.87 Az status=0009 Ze status=0009 11:43:55 Check angles 11:43:55 SkyScan query 11:43:56 SkyScan query done: ret=0 az=135.645<-9043 ze=-0.87<-12058 Statuses=0009 0009 11:43:56 Msec=750 True Az=135.645 Ze=-0.87 Az status=0009 Ze status=0009 11:43:56 Check angles 11:43:56 SkyScan query 11:43:57 SkyScan query done: ret=0 az=117.615<-7841 ze=20.52<-10632 Statuses=0009 0009 11:43:57 Msec=1500 True Az=117.615 Ze=20.52 Az status=0009 Ze status=0009 11:43:57 Check angles 11:43:57 SkyScan query 11:43:57 SkyScan query done: ret=0 az=100.26<-6684 ze=41.505<-9233 Statuses=0009 0009 11:43:57 Msec=2250 True Az=100.26 Ze=41.505 Az status=0009 Ze status=0009 11:43:58 Check angles 11:43:58 SkyScan query 11:43:58 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 11:43:58 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 11:43:58 Check angles 11:43:58 SkyScan query 11:43:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:43:59 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 11:43:59 Message to Master queued w/err=0: serial=141460 error=0 11:44:04 Received message from Master: op=Filter serial=141461 11:44:04 Color wheel filter change from 0 to 0 11:44:04 FLIGetFilterPos err=0 currentPosition=0 11:44:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:04 Filter is already there-color wheel unchanged 11:44:04 Received message from Master: op=Shutter serial=141462 11:44:04 Shutter LASER close 11:44:04 Received message from Camera: op=State serial=141464 11:44:04 GetSingleValue result=40 Value=cccccccc 11:44:04 SkyScan query 11:44:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 11:44:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:05 Parameters OK 11:44:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:05 Set A/D data flow result=40 11:44:05 Set A/D channel type result=40 11:44:05 Set A/D encoding result=40 11:44:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:05 Set channel filter=0.000000e+000 result=40 11:44:05 Config A/D Result=40 11:44:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:05 Get A/D filter: -9.255963e+061 result=40 11:44:05 Get A/D value=-858993460 result=40 11:44:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:05 Parameters OK 11:44:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:05 Set A/D data flow result=40 11:44:05 Set A/D channel type result=40 11:44:05 Set A/D encoding result=40 11:44:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:05 Set channel filter=0.000000e+000 result=40 11:44:05 Config A/D Result=40 11:44:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:05 Get A/D filter: -9.255963e+061 result=40 11:44:05 Get A/D value=-858993460 result=40 11:44:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:05 Aux= 11:44:05 Message to Camera, serial 141464 queued 11:44:42 Received message from Master: op=PointingHead serial=141477 11:44:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:44:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:44:42 Point started: ret=0 11:44:42 point_skyscan result=0 11:44:43 Check angles 11:44:43 SkyScan query 11:44:43 SkyScan query done: ret=0 az=109.305<-7287 ze=38.49<-9434 Statuses=0009 0008 11:44:43 Msec=0 True Az=109.305 Ze=38.49 Az status=0009 Ze status=0008 11:44:43 Check angles 11:44:43 SkyScan query 11:44:44 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 11:44:44 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 11:44:44 Check angles 11:44:44 SkyScan query 11:44:45 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 11:44:45 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 11:44:45 Check angles 11:44:45 SkyScan query 11:44:45 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 11:44:45 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 11:44:46 Check angles 11:44:46 SkyScan query 11:44:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:44:46 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:44:46 Check angles 11:44:46 SkyScan query 11:44:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:44:47 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:44:47 Message to Master queued w/err=0: serial=141477 error=0 11:44:52 Received message from Master: op=Filter serial=141478 11:44:52 Color wheel filter change from 0 to 0 11:44:52 FLIGetFilterPos err=0 currentPosition=0 11:44:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:52 Filter is already there-color wheel unchanged 11:44:52 Received message from Master: op=Shutter serial=141479 11:44:52 Shutter LASER close 11:44:52 Received message from Camera: op=State serial=141481 11:44:52 GetSingleValue result=40 Value=cccccccc 11:44:52 SkyScan query 11:44:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:44:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:53 Parameters OK 11:44:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:53 Set A/D data flow result=40 11:44:53 Set A/D channel type result=40 11:44:53 Set A/D encoding result=40 11:44:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:53 Set channel filter=0.000000e+000 result=40 11:44:53 Config A/D Result=40 11:44:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:53 Get A/D filter: -9.255963e+061 result=40 11:44:53 Get A/D value=-858993460 result=40 11:44:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:53 Parameters OK 11:44:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:53 Set A/D data flow result=40 11:44:53 Set A/D channel type result=40 11:44:53 Set A/D encoding result=40 11:44:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:53 Set channel filter=0.000000e+000 result=40 11:44:53 Config A/D Result=40 11:44:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:53 Get A/D filter: -9.255963e+061 result=40 11:44:53 Get A/D value=-858993460 result=40 11:44:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:53 Aux= 11:44:53 Message to Camera, serial 141481 queued 11:45:27 Received message from Master: op=Identify serial=141488 11:45:30 Received message from Master: op=PointingHead serial=141497 11:45:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:45:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:45:30 Point started: ret=0 11:45:30 point_skyscan result=0 11:45:31 Check angles 11:45:31 SkyScan query 11:45:31 SkyScan query done: ret=0 az=152.895<-10193 ze=8.52<-11432 Statuses=0009 0009 11:45:31 Msec=0 True Az=152.895 Ze=8.52 Az status=0009 Ze status=0009 11:45:31 Check angles 11:45:31 SkyScan query 11:45:32 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.405<-12827 Statuses=0009 0009 11:45:32 Msec=750 True Az=135.345 Ze=-12.405 Az status=0009 Ze status=0009 11:45:32 Check angles 11:45:32 SkyScan query 11:45:33 SkyScan query done: ret=0 az=117.945<-7863 ze=-33.405<-14227 Statuses=0009 0009 11:45:33 Msec=1500 True Az=117.945 Ze=-33.405 Az status=0009 Ze status=0009 11:45:33 Check angles 11:45:33 SkyScan query 11:45:34 SkyScan query done: ret=0 az=100.455<-6697 ze=-51.555<-15437 Statuses=0009 0009 11:45:34 Msec=2250 True Az=100.455 Ze=-51.555 Az status=0009 Ze status=0009 11:45:34 Check angles 11:45:34 SkyScan query 11:45:34 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 11:45:34 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 11:45:34 Check angles 11:45:34 SkyScan query 11:45:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:45:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:45:35 Message to Master queued w/err=0: serial=141497 error=0 11:45:40 Received message from Master: op=Filter serial=141498 11:45:40 Color wheel filter change from 0 to 0 11:45:40 FLIGetFilterPos err=0 currentPosition=0 11:45:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:40 Filter is already there-color wheel unchanged 11:45:40 Received message from Master: op=Shutter serial=141499 11:45:40 Shutter LASER close 11:45:40 Received message from Camera: op=State serial=141501 11:45:40 GetSingleValue result=40 Value=cccccccc 11:45:40 SkyScan query 11:45:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:45:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:41 Parameters OK 11:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:41 Set A/D data flow result=40 11:45:41 Set A/D channel type result=40 11:45:41 Set A/D encoding result=40 11:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:41 Set channel filter=0.000000e+000 result=40 11:45:41 Config A/D Result=40 11:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:41 Get A/D filter: -9.255963e+061 result=40 11:45:41 Get A/D value=-858993460 result=40 11:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:41 Parameters OK 11:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:41 Set A/D data flow result=40 11:45:41 Set A/D channel type result=40 11:45:41 Set A/D encoding result=40 11:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:41 Set channel filter=0.000000e+000 result=40 11:45:41 Config A/D Result=40 11:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:41 Get A/D filter: -9.255963e+061 result=40 11:45:41 Get A/D value=-858993460 result=40 11:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:41 Aux= 11:45:41 Message to Camera, serial 141501 queued 11:46:18 Received message from Master: op=PointingHead serial=141514 11:46:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) [UTC 2018-12-14 11:46:18] 11:46:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:46:18 Point started: ret=0 11:46:18 point_skyscan result=0 11:46:19 Check angles 11:46:19 SkyScan query 11:46:19 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.255<-17417 Statuses=0009 0009 11:46:19 Msec=0 True Az=108.99 Ze=-81.255 Az status=0009 Ze status=0009 11:46:20 Check angles 11:46:20 SkyScan query 11:46:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.225<-18815 Statuses=0008 0009 11:46:20 Msec=750 True Az=112.995 Ze=-102.225 Az status=0008 Ze status=0009 11:46:20 Check angles 11:46:20 SkyScan query 11:46:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.18<-20212 Statuses=0008 0009 11:46:21 Msec=1500 True Az=112.995 Ze=-123.18 Az status=0008 Ze status=0009 11:46:21 Check angles 11:46:21 SkyScan query 11:46:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 11:46:22 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 11:46:22 Check angles 11:46:22 SkyScan query 11:46:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.915<-23061 Statuses=0008 0009 11:46:22 Msec=3000 True Az=112.995 Ze=-165.915 Az status=0008 Ze status=0009 11:46:23 Check angles 11:46:23 SkyScan query 11:46:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 11:46:23 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 11:46:23 Message to Master queued w/err=0: serial=141514 error=0 11:46:28 Received message from Master: op=Filter serial=141515 11:46:28 Color wheel filter change from 0 to 0 11:46:28 FLIGetFilterPos err=0 currentPosition=0 11:46:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:28 Filter is already there-color wheel unchanged 11:46:28 Received message from Master: op=Shutter serial=141516 11:46:28 Shutter LASER open 11:46:29 Received message from Camera: op=State serial=141518 11:46:29 GetSingleValue result=40 Value=cccccccc 11:46:29 SkyScan query 11:46:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:46:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:29 Parameters OK 11:46:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:29 Set A/D data flow result=40 11:46:29 Set A/D channel type result=40 11:46:29 Set A/D encoding result=40 11:46:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:29 Set channel filter=0.000000e+000 result=40 11:46:29 Config A/D Result=40 11:46:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:29 Get A/D filter: -9.255963e+061 result=40 11:46:29 Get A/D value=-858993460 result=40 11:46:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:29 Parameters OK 11:46:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:29 Set A/D data flow result=40 11:46:29 Set A/D channel type result=40 11:46:29 Set A/D encoding result=40 11:46:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:29 Set channel filter=0.000000e+000 result=40 11:46:29 Config A/D Result=40 11:46:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:29 Get A/D filter: -9.255963e+061 result=40 11:46:29 Get A/D value=-858993460 result=40 11:46:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:29 Aux= 11:46:29 Message to Camera, serial 141518 queued 11:46:38 Received message from Master: op=Shutter serial=141528 11:46:38 Shutter LASER close 11:46:38 Received message from Master: op=PointingHead serial=141532 11:46:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:46:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:46:38 Point started: ret=0 11:46:38 point_skyscan result=0 11:46:39 Check angles 11:46:39 SkyScan query 11:46:40 SkyScan query done: ret=0 az=89.835<-5989 ze=157.185<-1521 Statuses=0009 0009 11:46:40 Msec=0 True Az=89.835 Ze=157.185 Az status=0009 Ze status=0009 11:46:40 Check angles 11:46:40 SkyScan query 11:46:40 SkyScan query done: ret=0 az=72.48<-4832 ze=136.275<-2915 Statuses=0009 0009 11:46:40 Msec=750 True Az=72.48 Ze=136.275 Az status=0009 Ze status=0009 11:46:41 Check angles 11:46:41 SkyScan query 11:46:41 SkyScan query done: ret=0 az=54.585<-3639 ze=114.87<-4342 Statuses=0009 0009 11:46:41 Msec=1500 True Az=54.585 Ze=114.87 Az status=0009 Ze status=0009 11:46:41 Check angles 11:46:41 SkyScan query 11:46:42 SkyScan query done: ret=0 az=40.98<-2732 ze=93.93<-5738 Statuses=0009 0009 11:46:42 Msec=2250 True Az=40.98 Ze=93.93 Az status=0009 Ze status=0009 11:46:42 Check angles 11:46:42 SkyScan query 11:46:43 SkyScan query done: ret=0 az=40.995<-2733 ze=72.51<-7166 Statuses=0008 0009 11:46:43 Msec=3000 True Az=40.995 Ze=72.51 Az status=0008 Ze status=0009 11:46:43 Check angles 11:46:43 SkyScan query 11:46:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 11:46:43 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 11:46:44 Check angles 11:46:44 SkyScan query 11:46:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:46:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:46:44 Message to Master queued w/err=0: serial=141532 error=0 11:46:49 Received message from Master: op=Filter serial=141533 11:46:49 Color wheel filter change from 0 to 0 11:46:49 FLIGetFilterPos err=0 currentPosition=0 11:46:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:49 Filter is already there-color wheel unchanged 11:46:49 Received message from Master: op=Shutter serial=141534 11:46:49 Shutter LASER close 11:46:50 Received message from Camera: op=State serial=141536 11:46:50 GetSingleValue result=40 Value=cccccccc 11:46:50 SkyScan query 11:46:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:46:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:50 Parameters OK 11:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:50 Set A/D data flow result=40 11:46:50 Set A/D channel type result=40 11:46:50 Set A/D encoding result=40 11:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:50 Set channel filter=0.000000e+000 result=40 11:46:50 Config A/D Result=40 11:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:50 Get A/D filter: -9.255963e+061 result=40 11:46:50 Get A/D value=-858993460 result=40 11:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:50 Parameters OK 11:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:50 Set A/D data flow result=40 11:46:50 Set A/D channel type result=40 11:46:50 Set A/D encoding result=40 11:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:50 Set channel filter=0.000000e+000 result=40 11:46:50 Config A/D Result=40 11:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:50 Get A/D filter: -9.255963e+061 result=40 11:46:50 Get A/D value=-858993460 result=40 11:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:50 Aux= 11:46:50 Message to Camera, serial 141536 queued 11:47:27 Received message from Master: op=PointingHead serial=141549 11:47:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:47:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:47:27 Point started: ret=0 11:47:27 point_skyscan result=0 11:47:28 Check angles 11:47:28 SkyScan query 11:47:29 SkyScan query done: ret=0 az=63.72<-4248 ze=66.54<-7564 Statuses=0009 0008 11:47:29 Msec=0 True Az=63.72 Ze=66.54 Az status=0009 Ze status=0008 11:47:29 Check angles 11:47:29 SkyScan query 11:47:29 SkyScan query done: ret=0 az=81.18<-5412 ze=66.51<-7566 Statuses=0009 0008 11:47:29 Msec=750 True Az=81.18 Ze=66.51 Az status=0009 Ze status=0008 11:47:30 Check angles 11:47:30 SkyScan query 11:47:30 SkyScan query done: ret=0 az=98.745<-6583 ze=66.495<-7567 Statuses=0009 0008 11:47:30 Msec=1500 True Az=98.745 Ze=66.495 Az status=0009 Ze status=0008 11:47:30 Check angles 11:47:30 SkyScan query 11:47:31 SkyScan query done: ret=0 az=116.085<-7739 ze=66.495<-7567 Statuses=0009 0008 11:47:31 Msec=2250 True Az=116.085 Ze=66.495 Az status=0009 Ze status=0008 11:47:31 Check angles 11:47:31 SkyScan query 11:47:32 SkyScan query done: ret=0 az=133.62<-8908 ze=66.495<-7567 Statuses=0009 0008 11:47:32 Msec=3000 True Az=133.62 Ze=66.495 Az status=0009 Ze status=0008 11:47:32 Check angles 11:47:32 SkyScan query 11:47:32 SkyScan query done: ret=0 az=151.005<-10067 ze=66.495<-7567 Statuses=0009 0008 11:47:32 Msec=3750 True Az=151.005 Ze=66.495 Az status=0009 Ze status=0008 11:47:33 Check angles 11:47:33 SkyScan query 11:47:33 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:47:33 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:47:33 Message to Master queued w/err=0: serial=141549 error=0 11:47:38 Received message from Master: op=Filter serial=141550 11:47:38 Color wheel filter change from 0 to 0 11:47:38 FLIGetFilterPos err=0 currentPosition=0 11:47:38 FLIGetStepsRemaining err=0 RemainingSteps=0 11:47:38 Filter is already there-color wheel unchanged 11:47:38 Received message from Master: op=Shutter serial=141551 11:47:38 Shutter LASER close 11:47:38 Received message from Camera: op=State serial=141553 11:47:38 GetSingleValue result=40 Value=cccccccc 11:47:38 SkyScan query 11:47:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:47:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:39 Parameters OK 11:47:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:39 Set A/D data flow result=40 11:47:39 Set A/D channel type result=40 11:47:39 Set A/D encoding result=40 11:47:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:39 Set channel filter=0.000000e+000 result=40 11:47:39 Config A/D Result=40 11:47:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:39 Get A/D filter: -9.255963e+061 result=40 11:47:39 Get A/D value=-858993460 result=40 11:47:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:39 Parameters OK 11:47:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:39 Set A/D data flow result=40 11:47:39 Set A/D channel type result=40 11:47:39 Set A/D encoding result=40 11:47:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:39 Set channel filter=0.000000e+000 result=40 11:47:39 Config A/D Result=40 11:47:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:39 Get A/D filter: -9.255963e+061 result=40 11:47:39 Get A/D value=-858993460 result=40 11:47:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:47:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:47:39 Aux= 11:47:39 Message to Camera, serial 141553 queued 11:48:16 Received message from Master: op=PointingHead serial=141566 11:48:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:48:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:48:16 Point started: ret=0 11:48:16 point_skyscan result=0 11:48:17 Check angles 11:48:17 SkyScan query 11:48:17 SkyScan query done: ret=0 az=134.82<-8988 ze=36.57<-9562 Statuses=0009 0009 11:48:17 Msec=0 True Az=134.82 Ze=36.57 Az status=0009 Ze status=0009 11:48:18 Check angles 11:48:18 SkyScan query 11:48:18 SkyScan query done: ret=0 az=117.015<-7801 ze=15.18<-10988 Statuses=0009 0009 11:48:18 Msec=750 True Az=117.015 Ze=15.18 Az status=0009 Ze status=0009 11:48:18 Check angles 11:48:18 SkyScan query 11:48:19 SkyScan query done: ret=0 az=99.585<-6639 ze=-5.835<-12389 Statuses=0009 0009 11:48:19 Msec=1500 True Az=99.585 Ze=-5.835 Az status=0009 Ze status=0009 11:48:19 Check angles 11:48:19 SkyScan query 11:48:20 SkyScan query done: ret=0 az=82.17<-5478 ze=-26.85<-13790 Statuses=0009 0009 11:48:20 Msec=2250 True Az=82.17 Ze=-26.85 Az status=0009 Ze status=0009 11:48:20 Check angles 11:48:20 SkyScan query 11:48:20 SkyScan query done: ret=0 az=64.635<-4309 ze=-38.58<-14572 Statuses=0009 0008 11:48:20 Msec=3000 True Az=64.635 Ze=-38.58 Az status=0009 Ze status=0008 11:48:21 Check angles 11:48:21 SkyScan query 11:48:21 SkyScan query done: ret=0 az=46.815<-3121 ze=-38.52<-14568 Statuses=0009 0008 11:48:21 Msec=3750 True Az=46.815 Ze=-38.52 Az status=0009 Ze status=0008 11:48:21 Check angles 11:48:21 SkyScan query 11:48:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:48:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:48:22 Message to Master queued w/err=0: serial=141566 error=0 11:48:27 Received message from Master: op=Filter serial=141567 11:48:27 Color wheel filter change from 0 to 0 11:48:27 FLIGetFilterPos err=0 currentPosition=0 11:48:27 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:27 Filter is already there-color wheel unchanged 11:48:27 Received message from Master: op=Shutter serial=141568 11:48:27 Shutter LASER close 11:48:27 Received message from Camera: op=State serial=141570 11:48:27 GetSingleValue result=40 Value=cccccccc 11:48:27 SkyScan query 11:48:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:48:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:28 Parameters OK 11:48:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:28 Set A/D data flow result=40 11:48:28 Set A/D channel type result=40 11:48:28 Set A/D encoding result=40 11:48:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:28 Set channel filter=0.000000e+000 result=40 11:48:28 Config A/D Result=40 11:48:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:28 Get A/D filter: -9.255963e+061 result=40 11:48:28 Get A/D value=-858993460 result=40 11:48:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:28 Parameters OK 11:48:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:28 Set A/D data flow result=40 11:48:28 Set A/D channel type result=40 11:48:28 Set A/D encoding result=40 11:48:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:28 Set channel filter=0.000000e+000 result=40 11:48:28 Config A/D Result=40 11:48:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:28 Get A/D filter: -9.255963e+061 result=40 11:48:28 Get A/D value=-858993460 result=40 11:48:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:28 Aux= 11:48:28 Message to Camera, serial 141570 queued 11:49:04 Received message from Master: op=PointingHead serial=141582 11:49:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:49:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:49:04 Point started: ret=0 11:49:04 point_skyscan result=0 11:49:05 Check angles 11:49:05 SkyScan query 11:49:05 SkyScan query done: ret=0 az=64.125<-4275 ze=-68.415<-16561 Statuses=0009 0009 11:49:05 Msec=0 True Az=64.125 Ze=-68.415 Az status=0009 Ze status=0009 11:49:06 Check angles 11:49:06 SkyScan query 11:49:06 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.385<-17959 Statuses=0009 0009 11:49:06 Msec=750 True Az=81.54 Ze=-89.385 Az status=0009 Ze status=0009 11:49:06 Check angles 11:49:06 SkyScan query 11:49:07 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.79<-19386 Statuses=0009 0009 11:49:07 Msec=1500 True Az=99.36 Ze=-110.79 Az status=0009 Ze status=0009 11:49:07 Check angles 11:49:07 SkyScan query 11:49:08 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.685<-20779 Statuses=0009 0009 11:49:08 Msec=2250 True Az=116.91 Ze=-131.685 Az status=0009 Ze status=0009 11:49:08 Check angles 11:49:08 SkyScan query 11:49:08 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 11:49:08 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 11:49:09 Check angles 11:49:09 SkyScan query 11:49:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 11:49:09 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 11:49:09 Message to Master queued w/err=0: serial=141582 error=0 11:49:14 Received message from Master: op=Filter serial=141583 11:49:14 Color wheel filter change from 0 to 0 11:49:14 FLIGetFilterPos err=0 currentPosition=0 11:49:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:14 Filter is already there-color wheel unchanged 11:49:14 Received message from Master: op=Shutter serial=141584 11:49:14 Shutter LASER close 11:49:14 Received message from Camera: op=State serial=141586 11:49:14 GetSingleValue result=40 Value=cccccccc 11:49:14 SkyScan query 11:49:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:49:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:15 Parameters OK 11:49:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:15 Set A/D data flow result=40 11:49:15 Set A/D channel type result=40 11:49:15 Set A/D encoding result=40 11:49:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:15 Set channel filter=0.000000e+000 result=40 11:49:15 Config A/D Result=40 11:49:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:15 Get A/D filter: -9.255963e+061 result=40 11:49:15 Get A/D value=-858993460 result=40 11:49:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:15 Parameters OK 11:49:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:15 Set A/D data flow result=40 11:49:15 Set A/D channel type result=40 11:49:15 Set A/D encoding result=40 11:49:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:15 Set channel filter=0.000000e+000 result=40 11:49:15 Config A/D Result=40 11:49:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:15 Get A/D filter: -9.255963e+061 result=40 11:49:15 Get A/D value=-858993460 result=40 11:49:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:15 Aux= 11:49:15 Message to Camera, serial 141586 queued 11:49:52 Received message from Master: op=PointingHead serial=141599 11:49:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:49:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:49:52 Point started: ret=0 11:49:52 point_skyscan result=0 11:49:53 Check angles 11:49:53 SkyScan query 11:49:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0009 0009 11:49:53 Msec=0 True Az=112.995 Ze=-171.135 Az status=0009 Ze status=0009 11:49:54 Check angles 11:49:54 SkyScan query 11:49:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:49:54 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:49:54 Message to Master queued w/err=0: serial=141599 error=0 11:49:59 Received message from Master: op=Filter serial=141600 11:49:59 Color wheel filter change from 0 to 0 11:49:59 FLIGetFilterPos err=0 currentPosition=0 11:49:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:59 Filter is already there-color wheel unchanged 11:49:59 Received message from Master: op=Shutter serial=141601 11:49:59 Shutter LASER open 11:50:00 Received message from Camera: op=State serial=141603 11:50:00 GetSingleValue result=40 Value=cccccccc 11:50:00 SkyScan query 11:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:50:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:00 Parameters OK 11:50:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:00 Set A/D data flow result=40 11:50:00 Set A/D channel type result=40 11:50:00 Set A/D encoding result=40 11:50:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:00 Set channel filter=0.000000e+000 result=40 11:50:00 Config A/D Result=40 11:50:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:00 Get A/D filter: -9.255963e+061 result=40 11:50:00 Get A/D value=-858993460 result=40 11:50:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:00 Parameters OK 11:50:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:00 Set A/D data flow result=40 11:50:00 Set A/D channel type result=40 11:50:00 Set A/D encoding result=40 11:50:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:00 Set channel filter=0.000000e+000 result=40 11:50:00 Config A/D Result=40 11:50:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:00 Get A/D filter: -9.255963e+061 result=40 11:50:00 Get A/D value=-858993460 result=40 11:50:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:00 Aux= 11:50:00 Message to Camera, serial 141603 queued 11:50:09 Received message from Master: op=Shutter serial=141613 11:50:09 Shutter LASER close 11:50:09 Received message from Master: op=PointingHead serial=141617 11:50:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:50:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:50:09 Point started: ret=0 11:50:09 point_skyscan result=0 11:50:10 Check angles 11:50:10 SkyScan query 11:50:11 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.31<-21554 Statuses=0009 0009 11:50:11 Msec=0 True Az=135.9 Ze=-143.31 Az status=0009 Ze status=0009 11:50:11 Check angles 11:50:11 SkyScan query 11:50:12 SkyScan query done: ret=0 az=153.405<-10227 ze=-122.325<-20155 Statuses=0009 0009 11:50:12 Msec=750 True Az=153.405 Ze=-122.325 Az status=0009 Ze status=0009 11:50:12 Check angles 11:50:12 SkyScan query 11:50:12 SkyScan query done: ret=0 az=171.255<-11417 ze=-100.89<-18726 Statuses=0009 0009 11:50:12 Msec=1500 True Az=171.255 Ze=-100.89 Az status=0009 Ze status=0009 11:50:13 Check angles 11:50:13 SkyScan query 11:50:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.515<-17301 Statuses=0008 0009 11:50:13 Msec=2250 True Az=176.01 Ze=-79.515 Az status=0008 Ze status=0009 11:50:13 Check angles 11:50:13 SkyScan query 11:50:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.545<-15903 Statuses=0008 0009 11:50:14 Msec=3000 True Az=176.01 Ze=-58.545 Az status=0008 Ze status=0009 11:50:14 Check angles 11:50:14 SkyScan query 11:50:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:50:15 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:50:15 Message to Master queued w/err=0: serial=141617 error=0 11:50:20 Received message from Master: op=Filter serial=141618 11:50:20 Color wheel filter change from 0 to 0 11:50:20 FLIGetFilterPos err=0 currentPosition=0 11:50:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:20 Filter is already there-color wheel unchanged 11:50:20 Received message from Master: op=Shutter serial=141619 11:50:20 Shutter LASER close 11:50:20 Received message from Camera: op=State serial=141621 11:50:20 GetSingleValue result=40 Value=cccccccc 11:50:20 SkyScan query 11:50:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:50:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:21 Parameters OK 11:50:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:21 Set A/D data flow result=40 11:50:21 Set A/D channel type result=40 11:50:21 Set A/D encoding result=40 11:50:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:21 Set channel filter=0.000000e+000 result=40 11:50:21 Config A/D Result=40 11:50:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:21 Get A/D filter: -9.255963e+061 result=40 11:50:21 Get A/D value=-858993460 result=40 11:50:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:21 Parameters OK 11:50:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:21 Set A/D data flow result=40 11:50:21 Set A/D channel type result=40 11:50:21 Set A/D encoding result=40 11:50:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:21 Set channel filter=0.000000e+000 result=40 11:50:21 Config A/D Result=40 11:50:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:21 Get A/D filter: -9.255963e+061 result=40 11:50:21 Get A/D value=-858993460 result=40 11:50:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:21 Aux= 11:50:21 Message to Camera, serial 141621 queued 11:50:57 Received message from Master: op=PointingHead serial=141634 11:50:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:50:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:50:58 Point started: ret=0 11:50:58 point_skyscan result=0 11:50:58 Check angles 11:50:58 SkyScan query 11:50:59 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.675<-13445 Statuses=0009 0009 11:50:59 Msec=0 True Az=152.97 Ze=-21.675 Az status=0009 Ze status=0009 11:50:59 Check angles 11:50:59 SkyScan query 11:51:00 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.675<-12045 Statuses=0009 0009 11:51:00 Msec=750 True Az=135.36 Ze=-0.675 Az status=0009 Ze status=0009 11:51:00 Check angles 11:51:00 SkyScan query 11:51:01 SkyScan query done: ret=0 az=117.945<-7863 ze=20.25<-10650 Statuses=0009 0009 11:51:01 Msec=1500 True Az=117.945 Ze=20.25 Az status=0009 Ze status=0009 11:51:01 Check angles 11:51:01 SkyScan query 11:51:01 SkyScan query done: ret=0 az=100.47<-6698 ze=41.25<-9250 Statuses=0009 0009 11:51:01 Msec=2250 True Az=100.47 Ze=41.25 Az status=0009 Ze status=0009 11:51:01 Check angles 11:51:01 SkyScan query 11:51:02 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 11:51:02 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 11:51:02 Check angles 11:51:02 SkyScan query 11:51:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:51:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:51:03 Message to Master queued w/err=0: serial=141634 error=0 11:51:08 Received message from Master: op=Filter serial=141635 11:51:08 Color wheel filter change from 0 to 0 11:51:08 FLIGetFilterPos err=0 currentPosition=0 11:51:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:08 Filter is already there-color wheel unchanged 11:51:08 Received message from Master: op=Shutter serial=141636 11:51:08 Shutter LASER close 11:51:08 Received message from Camera: op=State serial=141638 11:51:08 GetSingleValue result=40 Value=cccccccc 11:51:08 SkyScan query 11:51:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:51:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:09 Parameters OK 11:51:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:09 Set A/D data flow result=40 11:51:09 Set A/D channel type result=40 11:51:09 Set A/D encoding result=40 11:51:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:09 Set channel filter=0.000000e+000 result=40 11:51:09 Config A/D Result=40 11:51:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:09 Get A/D filter: -9.255963e+061 result=40 11:51:09 Get A/D value=-858993460 result=40 11:51:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:09 Parameters OK 11:51:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:09 Set A/D data flow result=40 11:51:09 Set A/D channel type result=40 11:51:09 Set A/D encoding result=40 11:51:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:09 Set channel filter=0.000000e+000 result=40 11:51:09 Config A/D Result=40 11:51:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:09 Get A/D filter: -9.255963e+061 result=40 11:51:09 Get A/D value=-858993460 result=40 11:51:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:09 Aux= 11:51:09 Message to Camera, serial 141638 queued 11:51:45 Received message from Master: op=PointingHead serial=141651 11:51:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:51:45 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:51:46 Point started: ret=0 11:51:46 point_skyscan result=0 11:51:46 Check angles 11:51:46 SkyScan query 11:51:47 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 11:51:47 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 11:51:47 Check angles 11:51:47 SkyScan query 11:51:48 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 11:51:48 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 11:51:48 Check angles 11:51:48 SkyScan query 11:51:49 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 11:51:49 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 11:51:49 Check angles 11:51:49 SkyScan query 11:51:49 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 11:51:49 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 11:51:49 Check angles 11:51:49 SkyScan query 11:51:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:51:50 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:51:50 Check angles 11:51:50 SkyScan query 11:51:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:51:51 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:51:51 Message to Master queued w/err=0: serial=141651 error=0 11:51:56 Received message from Master: op=Filter serial=141652 11:51:56 Color wheel filter change from 0 to 0 11:51:56 FLIGetFilterPos err=0 currentPosition=0 11:51:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:56 Filter is already there-color wheel unchanged 11:51:56 Received message from Master: op=Shutter serial=141653 11:51:56 Shutter LASER close 11:51:56 Received message from Camera: op=State serial=141655 11:51:56 GetSingleValue result=40 Value=cccccccc 11:51:56 SkyScan query 11:51:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:51:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:57 Parameters OK 11:51:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:57 Set A/D data flow result=40 11:51:57 Set A/D channel type result=40 11:51:57 Set A/D encoding result=40 11:51:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:57 Set channel filter=0.000000e+000 result=40 11:51:57 Config A/D Result=40 11:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:57 Get A/D filter: -9.255963e+061 result=40 11:51:57 Get A/D value=-858993460 result=40 11:51:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:57 Parameters OK 11:51:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:57 Set A/D data flow result=40 11:51:57 Set A/D channel type result=40 11:51:57 Set A/D encoding result=40 11:51:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:57 Set channel filter=0.000000e+000 result=40 11:51:57 Config A/D Result=40 11:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:57 Get A/D filter: -9.255963e+061 result=40 11:51:57 Get A/D value=-858993460 result=40 11:51:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:57 Aux= 11:51:57 Message to Camera, serial 141655 queued 11:52:33 Received message from Master: op=PointingHead serial=141668 11:52:33 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:52:33 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:52:34 Point started: ret=0 11:52:34 point_skyscan result=0 11:52:35 Check angles 11:52:35 SkyScan query 11:52:35 SkyScan query done: ret=0 az=152.955<-10197 ze=8.655<-11423 Statuses=0009 0009 11:52:35 Msec=0 True Az=152.955 Ze=8.655 Az status=0009 Ze status=0009 11:52:35 Check angles 11:52:35 SkyScan query 11:52:36 SkyScan query done: ret=0 az=135.525<-9035 ze=-12.285<-12819 Statuses=0009 0009 11:52:36 Msec=750 True Az=135.525 Ze=-12.285 Az status=0009 Ze status=0009 11:52:36 Check angles 11:52:36 SkyScan query 11:52:37 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.72<-14248 Statuses=0009 0009 11:52:37 Msec=1500 True Az=117.585 Ze=-33.72 Az status=0009 Ze status=0009 11:52:37 Check angles 11:52:37 SkyScan query 11:52:37 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.57<-15438 Statuses=0009 0009 11:52:37 Msec=2250 True Az=100.245 Ze=-51.57 Az status=0009 Ze status=0009 11:52:38 Check angles 11:52:38 SkyScan query 11:52:38 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 11:52:38 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 11:52:38 Check angles 11:52:38 SkyScan query 11:52:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:52:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:52:39 Message to Master queued w/err=0: serial=141668 error=0 11:52:44 Received message from Master: op=Filter serial=141669 11:52:44 Color wheel filter change from 0 to 0 11:52:44 FLIGetFilterPos err=0 currentPosition=0 11:52:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:44 Filter is already there-color wheel unchanged 11:52:44 Received message from Master: op=Shutter serial=141670 11:52:44 Shutter LASER close 11:52:44 Received message from Camera: op=State serial=141672 11:52:44 GetSingleValue result=40 Value=cccccccc 11:52:44 SkyScan query 11:52:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:52:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:45 Parameters OK 11:52:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:45 Set A/D data flow result=40 11:52:45 Set A/D channel type result=40 11:52:45 Set A/D encoding result=40 11:52:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:45 Set channel filter=0.000000e+000 result=40 11:52:45 Config A/D Result=40 11:52:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:45 Get A/D filter: -9.255963e+061 result=40 11:52:45 Get A/D value=-858993460 result=40 11:52:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:45 Parameters OK 11:52:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:45 Set A/D data flow result=40 11:52:45 Set A/D channel type result=40 11:52:45 Set A/D encoding result=40 11:52:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:45 Set channel filter=0.000000e+000 result=40 11:52:45 Config A/D Result=40 11:52:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:45 Get A/D filter: -9.255963e+061 result=40 11:52:45 Get A/D value=-858993460 result=40 11:52:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:45 Aux= 11:52:45 Message to Camera, serial 141672 queued 11:53:21 Received message from Master: op=PointingHead serial=141684 11:53:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:53:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:53:21 Point started: ret=0 11:53:21 point_skyscan result=0 11:53:22 Check angles 11:53:22 SkyScan query 11:53:22 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.72<-17448 Statuses=0009 0009 11:53:22 Msec=0 True Az=109.335 Ze=-81.72 Az status=0009 Ze status=0009 11:53:22 Check angles 11:53:22 SkyScan query 11:53:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.66<-18844 Statuses=0008 0009 11:53:23 Msec=750 True Az=112.995 Ze=-102.66 Az status=0008 Ze status=0009 11:53:23 Check angles 11:53:23 SkyScan query 11:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 11:53:24 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 11:53:24 Check angles 11:53:24 SkyScan query 11:53:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 11:53:25 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 11:53:25 Check angles 11:53:25 SkyScan query 11:53:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.48<-23032 Statuses=0008 0009 11:53:25 Msec=3000 True Az=112.995 Ze=-165.48 Az status=0008 Ze status=0009 11:53:25 Check angles 11:53:25 SkyScan query 11:53:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 11:53:26 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 11:53:26 Message to Master queued w/err=0: serial=141684 error=0 11:53:31 Received message from Master: op=Filter serial=141685 11:53:31 Color wheel filter change from 0 to 0 11:53:31 FLIGetFilterPos err=0 currentPosition=0 11:53:31 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:31 Filter is already there-color wheel unchanged 11:53:31 Received message from Master: op=Shutter serial=141686 11:53:31 Shutter LASER open 11:53:31 Received message from Camera: op=State serial=141688 11:53:31 GetSingleValue result=40 Value=cccccccc 11:53:31 SkyScan query 11:53:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:53:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:32 Parameters OK 11:53:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:32 Set A/D data flow result=40 11:53:32 Set A/D channel type result=40 11:53:32 Set A/D encoding result=40 11:53:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:32 Set channel filter=0.000000e+000 result=40 11:53:32 Config A/D Result=40 11:53:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:32 Get A/D filter: -9.255963e+061 result=40 11:53:32 Get A/D value=-858993460 result=40 11:53:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:32 Parameters OK 11:53:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:32 Set A/D data flow result=40 11:53:32 Set A/D channel type result=40 11:53:32 Set A/D encoding result=40 11:53:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:32 Set channel filter=0.000000e+000 result=40 11:53:32 Config A/D Result=40 11:53:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:32 Get A/D filter: -9.255963e+061 result=40 11:53:32 Get A/D value=-858993460 result=40 11:53:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:32 Aux= 11:53:32 Message to Camera, serial 141688 queued 11:53:40 Received message from Master: op=Shutter serial=141698 11:53:40 Shutter LASER close 11:53:41 Received message from Master: op=PointingHead serial=141702 11:53:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:53:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:53:41 Point started: ret=0 11:53:41 point_skyscan result=0 11:53:42 Check angles 11:53:42 SkyScan query 11:53:43 SkyScan query done: ret=0 az=90<-6000 ze=157.38<-1508 Statuses=0009 0009 11:53:43 Msec=0 True Az=90 Ze=157.38 Az status=0009 Ze status=0009 11:53:43 Check angles 11:53:43 SkyScan query 11:53:43 SkyScan query done: ret=0 az=72.555<-4837 ze=136.41<-2906 Statuses=0009 0009 11:53:43 Msec=750 True Az=72.555 Ze=136.41 Az status=0009 Ze status=0009 11:53:43 Check angles 11:53:43 SkyScan query 11:53:44 SkyScan query done: ret=0 az=55.14<-3676 ze=115.5<-4300 Statuses=0009 0009 11:53:44 Msec=1500 True Az=55.14 Ze=115.5 Az status=0009 Ze status=0009 11:53:44 Check angles 11:53:44 SkyScan query 11:53:45 SkyScan query done: ret=0 az=40.965<-2731 ze=94.5<-5700 Statuses=0009 0009 11:53:45 Msec=2250 True Az=40.965 Ze=94.5 Az status=0009 Ze status=0009 11:53:45 Check angles 11:53:45 SkyScan query 11:53:46 SkyScan query done: ret=0 az=40.995<-2733 ze=73.53<-7098 Statuses=0008 0009 11:53:46 Msec=3000 True Az=40.995 Ze=73.53 Az status=0008 Ze status=0009 11:53:46 Check angles 11:53:46 SkyScan query 11:53:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.65<-8490 Statuses=0008 0009 11:53:46 Msec=3750 True Az=40.995 Ze=52.65 Az status=0008 Ze status=0009 11:53:46 Check angles 11:53:46 SkyScan query 11:53:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:53:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:53:47 Message to Master queued w/err=0: serial=141702 error=0 11:53:52 Received message from Master: op=Filter serial=141703 11:53:52 Color wheel filter change from 0 to 0 11:53:52 FLIGetFilterPos err=0 currentPosition=0 11:53:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:52 Filter is already there-color wheel unchanged 11:53:52 Received message from Master: op=Shutter serial=141704 11:53:52 Shutter LASER close 11:53:52 Received message from Camera: op=State serial=141706 11:53:52 GetSingleValue result=40 Value=cccccccc 11:53:52 SkyScan query 11:53:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:53:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:53 Parameters OK 11:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:53 Set A/D data flow result=40 11:53:53 Set A/D channel type result=40 11:53:53 Set A/D encoding result=40 11:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:53 Set channel filter=0.000000e+000 result=40 11:53:53 Config A/D Result=40 11:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:53 Get A/D filter: -9.255963e+061 result=40 11:53:53 Get A/D value=-858993460 result=40 11:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:53 Parameters OK 11:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:53 Set A/D data flow result=40 11:53:53 Set A/D channel type result=40 11:53:53 Set A/D encoding result=40 11:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:53 Set channel filter=0.000000e+000 result=40 11:53:53 Config A/D Result=40 11:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:53 Get A/D filter: -9.255963e+061 result=40 11:53:53 Get A/D value=-858993460 result=40 11:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:53 Aux= 11:53:53 Message to Camera, serial 141706 queued 11:54:30 Received message from Master: op=PointingHead serial=141719 11:54:30 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:54:30 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:54:30 Point started: ret=0 11:54:30 point_skyscan result=0 11:54:31 Check angles 11:54:31 SkyScan query 11:54:31 SkyScan query done: ret=0 az=63.735<-4249 ze=66.555<-7563 Statuses=0009 0008 11:54:31 Msec=0 True Az=63.735 Ze=66.555 Az status=0009 Ze status=0008 11:54:32 Check angles 11:54:32 SkyScan query 11:54:32 SkyScan query done: ret=0 az=81.33<-5422 ze=66.51<-7566 Statuses=0009 0008 11:54:32 Msec=750 True Az=81.33 Ze=66.51 Az status=0009 Ze status=0008 11:54:32 Check angles 11:54:32 SkyScan query 11:54:33 SkyScan query done: ret=0 az=98.805<-6587 ze=66.495<-7567 Statuses=0009 0008 11:54:33 Msec=1500 True Az=98.805 Ze=66.495 Az status=0009 Ze status=0008 11:54:33 Check angles 11:54:33 SkyScan query 11:54:34 SkyScan query done: ret=0 az=116.175<-7745 ze=66.495<-7567 Statuses=0009 0008 11:54:34 Msec=2250 True Az=116.175 Ze=66.495 Az status=0009 Ze status=0008 11:54:34 Check angles 11:54:34 SkyScan query 11:54:34 SkyScan query done: ret=0 az=133.635<-8909 ze=66.495<-7567 Statuses=0009 0008 11:54:34 Msec=3000 True Az=133.635 Ze=66.495 Az status=0009 Ze status=0008 11:54:35 Check angles 11:54:35 SkyScan query 11:54:35 SkyScan query done: ret=0 az=151.05<-10070 ze=66.495<-7567 Statuses=0009 0008 11:54:35 Msec=3750 True Az=151.05 Ze=66.495 Az status=0009 Ze status=0008 11:54:35 Check angles 11:54:35 SkyScan query 11:54:36 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:54:36 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:54:36 Message to Master queued w/err=0: serial=141719 error=0 11:54:41 Received message from Master: op=Filter serial=141720 11:54:41 Color wheel filter change from 0 to 0 11:54:41 FLIGetFilterPos err=0 currentPosition=0 11:54:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:41 Filter is already there-color wheel unchanged 11:54:41 Received message from Master: op=Shutter serial=141721 11:54:41 Shutter LASER close 11:54:41 Received message from Camera: op=State serial=141723 11:54:41 GetSingleValue result=40 Value=cccccccc 11:54:41 SkyScan query 11:54:42 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:54:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:42 Parameters OK 11:54:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:42 Set A/D data flow result=40 11:54:42 Set A/D channel type result=40 11:54:42 Set A/D encoding result=40 11:54:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:42 Set channel filter=0.000000e+000 result=40 11:54:42 Config A/D Result=40 11:54:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:42 Get A/D filter: -9.255963e+061 result=40 11:54:42 Get A/D value=-858993460 result=40 11:54:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:42 Parameters OK 11:54:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:42 Set A/D data flow result=40 11:54:42 Set A/D channel type result=40 11:54:42 Set A/D encoding result=40 11:54:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:42 Set channel filter=0.000000e+000 result=40 11:54:42 Config A/D Result=40 11:54:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:42 Get A/D filter: -9.255963e+061 result=40 11:54:42 Get A/D value=-858993460 result=40 11:54:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:42 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:42 Aux= 11:54:42 Message to Camera, serial 141723 queued 11:55:19 Received message from Master: op=PointingHead serial=141736 11:55:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:55:19 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:55:19 Point started: ret=0 11:55:19 point_skyscan result=0 11:55:20 Check angles 11:55:20 SkyScan query 11:55:20 SkyScan query done: ret=0 az=135.09<-9006 ze=36.825<-9545 Statuses=0009 0009 11:55:20 Msec=0 True Az=135.09 Ze=36.825 Az status=0009 Ze status=0009 11:55:20 Check angles 11:55:20 SkyScan query 11:55:21 SkyScan query done: ret=0 az=117.66<-7844 ze=15.9<-10940 Statuses=0009 0009 11:55:21 Msec=750 True Az=117.66 Ze=15.9 Az status=0009 Ze status=0009 11:55:21 Check angles 11:55:21 SkyScan query 11:55:22 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.535<-12369 Statuses=0009 0009 11:55:22 Msec=1500 True Az=99.915 Ze=-5.535 Az status=0009 Ze status=0009 11:55:22 Check angles 11:55:22 SkyScan query 11:55:23 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.985<-13799 Statuses=0009 0009 11:55:23 Msec=2250 True Az=82.035 Ze=-26.985 Az status=0009 Ze status=0009 11:55:23 Check angles 11:55:23 SkyScan query 11:55:23 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.58<-14572 Statuses=0009 0008 11:55:23 Msec=3000 True Az=64.545 Ze=-38.58 Az status=0009 Ze status=0008 11:55:23 Check angles 11:55:23 SkyScan query 11:55:24 SkyScan query done: ret=0 az=46.935<-3129 ze=-38.52<-14568 Statuses=0009 0008 11:55:24 Msec=3750 True Az=46.935 Ze=-38.52 Az status=0009 Ze status=0008 11:55:24 Check angles 11:55:24 SkyScan query 11:55:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:55:25 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:55:25 Message to Master queued w/err=0: serial=141736 error=0 11:55:30 Received message from Master: op=Filter serial=141737 11:55:30 Color wheel filter change from 0 to 0 11:55:30 FLIGetFilterPos err=0 currentPosition=0 11:55:30 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:30 Filter is already there-color wheel unchanged 11:55:30 Received message from Master: op=Shutter serial=141738 11:55:30 Shutter LASER close 11:55:30 Received message from Camera: op=State serial=141740 11:55:30 GetSingleValue result=40 Value=cccccccc 11:55:30 SkyScan query 11:55:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:55:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:31 Parameters OK 11:55:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:31 Set A/D data flow result=40 11:55:31 Set A/D channel type result=40 11:55:31 Set A/D encoding result=40 11:55:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:31 Set channel filter=0.000000e+000 result=40 11:55:31 Config A/D Result=40 11:55:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:31 Get A/D filter: -9.255963e+061 result=40 11:55:31 Get A/D value=-858993460 result=40 11:55:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:31 Parameters OK 11:55:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:31 Set A/D data flow result=40 11:55:31 Set A/D channel type result=40 11:55:31 Set A/D encoding result=40 11:55:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:31 Set channel filter=0.000000e+000 result=40 11:55:31 Config A/D Result=40 11:55:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2018-12-14 11:55:31] 11:55:31 Get A/D filter: -9.255963e+061 result=40 11:55:31 Get A/D value=-858993460 result=40 11:55:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:31 Aux= 11:55:31 Message to Camera, serial 141740 queued [UTC 2018-12-14 11:55:52] 11:56:07 Received message from Master: op=PointingHead serial=141753 11:56:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:56:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:56:08 Point started: ret=0 11:56:08 point_skyscan result=0 11:56:09 Check angles 11:56:09 SkyScan query 11:56:09 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.295<-16553 Statuses=0009 0009 11:56:09 Msec=0 True Az=63.945 Ze=-68.295 Az status=0009 Ze status=0009 11:56:09 Check angles 11:56:09 SkyScan query 11:56:10 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.7<-17980 Statuses=0009 0009 11:56:10 Msec=750 True Az=81.84 Ze=-89.7 Az status=0009 Ze status=0009 11:56:10 Check angles 11:56:10 SkyScan query 11:56:11 SkyScan query done: ret=0 az=99.3<-6620 ze=-110.685<-19379 Statuses=0009 0009 11:56:11 Msec=1500 True Az=99.3 Ze=-110.685 Az status=0009 Ze status=0009 11:56:11 Check angles 11:56:11 SkyScan query 11:56:11 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.58<-20772 Statuses=0009 0009 11:56:11 Msec=2250 True Az=116.76 Ze=-131.58 Az status=0009 Ze status=0009 11:56:12 Check angles 11:56:12 SkyScan query 11:56:12 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 11:56:12 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 11:56:12 Check angles 11:56:12 SkyScan query 11:56:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 11:56:13 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 11:56:13 Message to Master queued w/err=0: serial=141753 error=0 11:56:18 Received message from Master: op=Filter serial=141754 11:56:18 Color wheel filter change from 0 to 0 11:56:18 FLIGetFilterPos err=0 currentPosition=0 11:56:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:18 Filter is already there-color wheel unchanged 11:56:18 Received message from Master: op=Shutter serial=141755 11:56:18 Shutter LASER close 11:56:18 Received message from Camera: op=State serial=141757 11:56:18 GetSingleValue result=40 Value=cccccccc 11:56:18 SkyScan query 11:56:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:56:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:19 Parameters OK 11:56:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:19 Set A/D data flow result=40 11:56:19 Set A/D channel type result=40 11:56:19 Set A/D encoding result=40 11:56:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:19 Set channel filter=0.000000e+000 result=40 11:56:19 Config A/D Result=40 11:56:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:19 Get A/D filter: -9.255963e+061 result=40 11:56:19 Get A/D value=-858993460 result=40 11:56:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:19 Parameters OK 11:56:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:19 Set A/D data flow result=40 11:56:19 Set A/D channel type result=40 11:56:19 Set A/D encoding result=40 11:56:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:19 Set channel filter=0.000000e+000 result=40 11:56:19 Config A/D Result=40 11:56:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:19 Get A/D filter: -9.255963e+061 result=40 11:56:19 Get A/D value=-858993460 result=40 11:56:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:19 Aux= 11:56:19 Message to Camera, serial 141757 queued 11:56:56 Received message from Master: op=PointingHead serial=141770 11:56:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:56:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:56:56 Point started: ret=0 11:56:56 point_skyscan result=0 11:56:57 Check angles 11:56:57 SkyScan query 11:56:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.315<-23421 Statuses=0009 0009 11:56:57 Msec=0 True Az=112.995 Ze=-171.315 Az status=0009 Ze status=0009 11:56:57 Check angles 11:56:57 SkyScan query 11:56:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:56:58 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:56:58 Message to Master queued w/err=0: serial=141770 error=0 11:57:03 Received message from Master: op=Filter serial=141771 11:57:03 Color wheel filter change from 0 to 0 11:57:03 FLIGetFilterPos err=0 currentPosition=0 11:57:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:03 Filter is already there-color wheel unchanged 11:57:03 Received message from Master: op=Shutter serial=141772 11:57:03 Shutter LASER open 11:57:03 Received message from Camera: op=State serial=141774 11:57:03 GetSingleValue result=40 Value=cccccccc 11:57:03 SkyScan query 11:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:57:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:04 Parameters OK 11:57:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:04 Set A/D data flow result=40 11:57:04 Set A/D channel type result=40 11:57:04 Set A/D encoding result=40 11:57:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:04 Set channel filter=0.000000e+000 result=40 11:57:04 Config A/D Result=40 11:57:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:04 Get A/D filter: -9.255963e+061 result=40 11:57:04 Get A/D value=-858993460 result=40 11:57:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:04 Parameters OK 11:57:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:04 Set A/D data flow result=40 11:57:04 Set A/D channel type result=40 11:57:04 Set A/D encoding result=40 11:57:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:04 Set channel filter=0.000000e+000 result=40 11:57:04 Config A/D Result=40 11:57:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:04 Get A/D filter: -9.255963e+061 result=40 11:57:04 Get A/D value=-858993460 result=40 11:57:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:04 Aux= 11:57:04 Message to Camera, serial 141774 queued 11:57:12 Received message from Master: op=Shutter serial=141784 11:57:12 Shutter LASER close 11:57:13 Received message from Master: op=PointingHead serial=141788 11:57:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:57:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:57:13 Point started: ret=0 11:57:13 point_skyscan result=0 11:57:14 Check angles 11:57:14 SkyScan query 11:57:15 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.385<-21559 Statuses=0009 0009 11:57:15 Msec=0 True Az=135.81 Ze=-143.385 Az status=0009 Ze status=0009 11:57:15 Check angles 11:57:15 SkyScan query 11:57:15 SkyScan query done: ret=0 az=153.735<-10249 ze=-121.965<-20131 Statuses=0009 0009 11:57:15 Msec=750 True Az=153.735 Ze=-121.965 Az status=0009 Ze status=0009 11:57:16 Check angles 11:57:16 SkyScan query 11:57:16 SkyScan query done: ret=0 az=171.57<-11438 ze=-100.515<-18701 Statuses=0009 0009 11:57:16 Msec=1500 True Az=171.57 Ze=-100.515 Az status=0009 Ze status=0009 11:57:16 Check angles 11:57:16 SkyScan query 11:57:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.155<-17277 Statuses=0008 0009 11:57:17 Msec=2250 True Az=176.01 Ze=-79.155 Az status=0008 Ze status=0009 11:57:17 Check angles 11:57:17 SkyScan query 11:57:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.2<-15880 Statuses=0008 0009 11:57:18 Msec=3000 True Az=176.01 Ze=-58.2 Az status=0008 Ze status=0009 11:57:18 Check angles 11:57:18 SkyScan query 11:57:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:57:18 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:57:18 Message to Master queued w/err=0: serial=141788 error=0 11:57:23 Received message from Master: op=Filter serial=141789 11:57:23 Color wheel filter change from 0 to 0 11:57:23 FLIGetFilterPos err=0 currentPosition=0 11:57:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:23 Filter is already there-color wheel unchanged 11:57:24 Received message from Master: op=Shutter serial=141790 11:57:24 Shutter LASER close 11:57:24 Received message from Camera: op=State serial=141792 11:57:24 GetSingleValue result=40 Value=cccccccc 11:57:24 SkyScan query 11:57:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:57:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:24 Parameters OK 11:57:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:24 Set A/D data flow result=40 11:57:24 Set A/D channel type result=40 11:57:24 Set A/D encoding result=40 11:57:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:24 Set channel filter=0.000000e+000 result=40 11:57:24 Config A/D Result=40 11:57:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:24 Get A/D filter: -9.255963e+061 result=40 11:57:24 Get A/D value=-858993460 result=40 11:57:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:24 Parameters OK 11:57:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:24 Set A/D data flow result=40 11:57:24 Set A/D channel type result=40 11:57:24 Set A/D encoding result=40 11:57:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:24 Set channel filter=0.000000e+000 result=40 11:57:24 Config A/D Result=40 11:57:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:24 Get A/D filter: -9.255963e+061 result=40 11:57:24 Get A/D value=-858993460 result=40 11:57:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:24 Aux= 11:57:24 Message to Camera, serial 141792 queued 11:58:01 Received message from Master: op=PointingHead serial=141805 11:58:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:58:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:58:02 Point started: ret=0 11:58:02 point_skyscan result=0 11:58:02 Check angles 11:58:02 SkyScan query 11:58:03 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.795<-13453 Statuses=0009 0009 11:58:03 Msec=0 True Az=152.97 Ze=-21.795 Az status=0009 Ze status=0009 11:58:03 Check angles 11:58:03 SkyScan query 11:58:04 SkyScan query done: ret=0 az=135.63<-9042 ze=-0.795<-12053 Statuses=0009 0009 11:58:04 Msec=750 True Az=135.63 Ze=-0.795 Az status=0009 Ze status=0009 11:58:04 Check angles 11:58:04 SkyScan query 11:58:04 SkyScan query done: ret=0 az=117.63<-7842 ze=20.61<-10626 Statuses=0009 0009 11:58:04 Msec=1500 True Az=117.63 Ze=20.61 Az status=0009 Ze status=0009 11:58:05 Check angles 11:58:05 SkyScan query 11:58:05 SkyScan query done: ret=0 az=100.305<-6687 ze=41.55<-9230 Statuses=0009 0009 11:58:05 Msec=2250 True Az=100.305 Ze=41.55 Az status=0009 Ze status=0009 11:58:05 Check angles 11:58:05 SkyScan query 11:58:06 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 11:58:06 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 11:58:06 Check angles 11:58:06 SkyScan query 11:58:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 11:58:07 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 11:58:07 Message to Master queued w/err=0: serial=141805 error=0 11:58:12 Received message from Master: op=Filter serial=141806 11:58:12 Color wheel filter change from 0 to 0 11:58:12 FLIGetFilterPos err=0 currentPosition=0 11:58:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:12 Filter is already there-color wheel unchanged 11:58:12 Received message from Master: op=Shutter serial=141807 11:58:12 Shutter LASER close 11:58:12 Received message from Camera: op=State serial=141809 11:58:12 GetSingleValue result=40 Value=cccccccc 11:58:12 SkyScan query 11:58:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:58:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:12 Parameters OK 11:58:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:12 Set A/D data flow result=40 11:58:12 Set A/D channel type result=40 11:58:12 Set A/D encoding result=40 11:58:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:12 Set channel filter=0.000000e+000 result=40 11:58:12 Config A/D Result=40 11:58:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:12 Get A/D filter: -9.255963e+061 result=40 11:58:12 Get A/D value=-858993460 result=40 11:58:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:12 Parameters OK 11:58:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:12 Set A/D data flow result=40 11:58:12 Set A/D channel type result=40 11:58:12 Set A/D encoding result=40 11:58:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:12 Set channel filter=0.000000e+000 result=40 11:58:12 Config A/D Result=40 11:58:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:12 Get A/D filter: -9.255963e+061 result=40 11:58:12 Get A/D value=-858993460 result=40 11:58:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:12 Aux= 11:58:12 Message to Camera, serial 141809 queued 11:58:49 Received message from Master: op=PointingHead serial=141822 11:58:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:58:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:58:50 Point started: ret=0 11:58:50 point_skyscan result=0 11:58:50 Check angles 11:58:50 SkyScan query 11:58:51 SkyScan query done: ret=0 az=109.095<-7273 ze=38.49<-9434 Statuses=0009 0008 11:58:51 Msec=0 True Az=109.095 Ze=38.49 Az status=0009 Ze status=0008 11:58:51 Check angles 11:58:51 SkyScan query 11:58:52 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 11:58:52 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 11:58:52 Check angles 11:58:52 SkyScan query 11:58:52 SkyScan query done: ret=0 az=144.12<-9608 ze=38.505<-9433 Statuses=0009 0008 11:58:52 Msec=1500 True Az=144.12 Ze=38.505 Az status=0009 Ze status=0008 11:58:53 Check angles 11:58:53 SkyScan query 11:58:53 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 11:58:53 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 11:58:53 Check angles 11:58:53 SkyScan query 11:58:54 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:58:54 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:58:54 Check angles 11:58:54 SkyScan query 11:58:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:58:55 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:58:55 Message to Master queued w/err=0: serial=141822 error=0 11:59:00 Received message from Master: op=Filter serial=141823 11:59:00 Color wheel filter change from 0 to 0 11:59:00 FLIGetFilterPos err=0 currentPosition=0 11:59:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:00 Filter is already there-color wheel unchanged 11:59:00 Received message from Master: op=Shutter serial=141824 11:59:00 Shutter LASER close 11:59:00 Received message from Camera: op=State serial=141826 11:59:00 GetSingleValue result=40 Value=cccccccc 11:59:00 SkyScan query 11:59:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:59:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:00 Parameters OK 11:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:00 Set A/D data flow result=40 11:59:00 Set A/D channel type result=40 11:59:00 Set A/D encoding result=40 11:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:00 Set channel filter=0.000000e+000 result=40 11:59:00 Config A/D Result=40 11:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:00 Get A/D filter: -9.255963e+061 result=40 11:59:00 Get A/D value=-858993460 result=40 11:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:00 Parameters OK 11:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:00 Set A/D data flow result=40 11:59:00 Set A/D channel type result=40 11:59:00 Set A/D encoding result=40 11:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:00 Set channel filter=0.000000e+000 result=40 11:59:00 Config A/D Result=40 11:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:00 Get A/D filter: -9.255963e+061 result=40 11:59:00 Get A/D value=-858993460 result=40 11:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:00 Aux= 11:59:00 Message to Camera, serial 141826 queued 11:59:37 Received message from Master: op=PointingHead serial=141839 11:59:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:59:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:59:38 Point started: ret=0 11:59:38 point_skyscan result=0 11:59:38 Check angles 11:59:38 SkyScan query 11:59:39 SkyScan query done: ret=0 az=152.745<-10183 ze=8.58<-11428 Statuses=0009 0009 11:59:39 Msec=0 True Az=152.745 Ze=8.58 Az status=0009 Ze status=0009 11:59:39 Check angles 11:59:39 SkyScan query 11:59:40 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.345<-12823 Statuses=0009 0009 11:59:40 Msec=750 True Az=135.315 Ze=-12.345 Az status=0009 Ze status=0009 11:59:40 Check angles 11:59:40 SkyScan query 11:59:40 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.33<-14222 Statuses=0009 0009 11:59:40 Msec=1500 True Az=117.765 Ze=-33.33 Az status=0009 Ze status=0009 11:59:41 Check angles 11:59:41 SkyScan query 11:59:41 SkyScan query done: ret=0 az=100.11<-6674 ze=-51.555<-15437 Statuses=0009 0009 11:59:41 Msec=2250 True Az=100.11 Ze=-51.555 Az status=0009 Ze status=0009 11:59:41 Check angles 11:59:41 SkyScan query 11:59:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 11:59:42 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 11:59:42 Check angles 11:59:42 SkyScan query 11:59:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:59:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:59:43 Message to Master queued w/err=0: serial=141839 error=0 11:59:48 Received message from Master: op=Filter serial=141840 11:59:48 Color wheel filter change from 0 to 0 11:59:48 FLIGetFilterPos err=0 currentPosition=0 11:59:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:48 Filter is already there-color wheel unchanged 11:59:48 Received message from Master: op=Shutter serial=141841 11:59:48 Shutter LASER close 11:59:48 Received message from Camera: op=State serial=141843 11:59:48 GetSingleValue result=40 Value=cccccccc 11:59:48 SkyScan query 11:59:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:59:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:49 Parameters OK 11:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:49 Set A/D data flow result=40 11:59:49 Set A/D channel type result=40 11:59:49 Set A/D encoding result=40 11:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:49 Set channel filter=0.000000e+000 result=40 11:59:49 Config A/D Result=40 11:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:49 Get A/D filter: -9.255963e+061 result=40 11:59:49 Get A/D value=-858993460 result=40 11:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:49 Parameters OK 11:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:49 Set A/D data flow result=40 11:59:49 Set A/D channel type result=40 11:59:49 Set A/D encoding result=40 11:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:49 Set channel filter=0.000000e+000 result=40 11:59:49 Config A/D Result=40 11:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:49 Get A/D filter: -9.255963e+061 result=40 11:59:49 Get A/D value=-858993460 result=40 11:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:49 Aux= 11:59:49 Message to Camera, serial 141843 queued 12:00:25 Received message from Master: op=PointingHead serial=141856 12:00:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:00:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:00:26 Point started: ret=0 12:00:26 point_skyscan result=0 12:00:26 Check angles 12:00:26 SkyScan query 12:00:27 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.135<-17409 Statuses=0009 0009 12:00:27 Msec=0 True Az=108.855 Ze=-81.135 Az status=0009 Ze status=0009 12:00:27 Check angles 12:00:27 SkyScan query 12:00:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 12:00:28 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 12:00:28 Check angles 12:00:28 SkyScan query 12:00:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.51<-20234 Statuses=0008 0009 12:00:29 Msec=1500 True Az=112.995 Ze=-123.51 Az status=0008 Ze status=0009 12:00:29 Check angles 12:00:29 SkyScan query 12:00:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.45<-21630 Statuses=0008 0009 12:00:29 Msec=2250 True Az=112.995 Ze=-144.45 Az status=0008 Ze status=0009 12:00:29 Check angles 12:00:29 SkyScan query 12:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 12:00:30 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 12:00:30 Check angles 12:00:30 SkyScan query 12:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 12:00:31 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 12:00:31 Message to Master queued w/err=0: serial=141856 error=0 12:00:36 Received message from Master: op=Filter serial=141857 12:00:36 Color wheel filter change from 0 to 0 12:00:36 FLIGetFilterPos err=0 currentPosition=0 12:00:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:36 Filter is already there-color wheel unchanged 12:00:36 Received message from Master: op=Shutter serial=141858 12:00:36 Shutter LASER open 12:00:36 Received message from Camera: op=State serial=141860 12:00:36 GetSingleValue result=40 Value=cccccccc 12:00:36 SkyScan query 12:00:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:00:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:37 Parameters OK 12:00:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:37 Set A/D data flow result=40 12:00:37 Set A/D channel type result=40 12:00:37 Set A/D encoding result=40 12:00:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:37 Set channel filter=0.000000e+000 result=40 12:00:37 Config A/D Result=40 12:00:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:37 Get A/D filter: -9.255963e+061 result=40 12:00:37 Get A/D value=-858993460 result=40 12:00:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:37 Parameters OK 12:00:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:37 Set A/D data flow result=40 12:00:37 Set A/D channel type result=40 12:00:37 Set A/D encoding result=40 12:00:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:37 Set channel filter=0.000000e+000 result=40 12:00:37 Config A/D Result=40 12:00:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:37 Get A/D filter: -9.255963e+061 result=40 12:00:37 Get A/D value=-858993460 result=40 12:00:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:37 Aux= 12:00:37 Message to Camera, serial 141860 queued 12:00:45 Received message from Master: op=Shutter serial=141870 12:00:45 Shutter LASER close 12:00:46 Received message from Master: op=PointingHead serial=141874 12:00:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:00:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:00:46 Point started: ret=0 12:00:46 point_skyscan result=0 12:00:47 Check angles 12:00:47 SkyScan query 12:00:47 SkyScan query done: ret=0 az=89.625<-5975 ze=156.96<-1536 Statuses=0009 0009 12:00:47 Msec=0 True Az=89.625 Ze=156.96 Az status=0009 Ze status=0009 12:00:47 Check angles 12:00:47 SkyScan query 12:00:48 SkyScan query done: ret=0 az=72.225<-4815 ze=136.005<-2933 Statuses=0009 0009 12:00:48 Msec=750 True Az=72.225 Ze=136.005 Az status=0009 Ze status=0009 12:00:48 Check angles 12:00:48 SkyScan query 12:00:49 SkyScan query done: ret=0 az=54.405<-3627 ze=114.555<-4363 Statuses=0009 0009 12:00:49 Msec=1500 True Az=54.405 Ze=114.555 Az status=0009 Ze status=0009 12:00:49 Check angles 12:00:49 SkyScan query 12:00:50 SkyScan query done: ret=0 az=40.98<-2732 ze=93.66<-5756 Statuses=0009 0009 12:00:50 Msec=2250 True Az=40.98 Ze=93.66 Az status=0009 Ze status=0009 12:00:50 Check angles 12:00:50 SkyScan query 12:00:50 SkyScan query done: ret=0 az=40.995<-2733 ze=72.66<-7156 Statuses=0008 0009 12:00:50 Msec=3000 True Az=40.995 Ze=72.66 Az status=0008 Ze status=0009 12:00:51 Check angles 12:00:51 SkyScan query 12:00:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.155<-8523 Statuses=0008 0009 12:00:51 Msec=3750 True Az=40.995 Ze=52.155 Az status=0008 Ze status=0009 12:00:51 Check angles 12:00:51 SkyScan query 12:00:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:00:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:00:52 Message to Master queued w/err=0: serial=141874 error=0 12:00:57 Received message from Master: op=Filter serial=141875 12:00:57 Color wheel filter change from 0 to 0 12:00:57 FLIGetFilterPos err=0 currentPosition=0 12:00:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:57 Filter is already there-color wheel unchanged 12:00:57 Received message from Master: op=Shutter serial=141876 12:00:57 Shutter LASER close 12:00:57 Received message from Camera: op=State serial=141878 12:00:57 GetSingleValue result=40 Value=cccccccc 12:00:57 SkyScan query 12:00:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:00:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:58 Parameters OK 12:00:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:58 Set A/D data flow result=40 12:00:58 Set A/D channel type result=40 12:00:58 Set A/D encoding result=40 12:00:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:58 Set channel filter=0.000000e+000 result=40 12:00:58 Config A/D Result=40 12:00:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:58 Get A/D filter: -9.255963e+061 result=40 12:00:58 Get A/D value=-858993460 result=40 12:00:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:58 Parameters OK 12:00:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:58 Set A/D data flow result=40 12:00:58 Set A/D channel type result=40 12:00:58 Set A/D encoding result=40 12:00:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:58 Set channel filter=0.000000e+000 result=40 12:00:58 Config A/D Result=40 12:00:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:58 Get A/D filter: -9.255963e+061 result=40 12:00:58 Get A/D value=-858993460 result=40 12:00:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:58 Aux= 12:00:58 Message to Camera, serial 141878 queued 12:01:35 Received message from Master: op=PointingHead serial=141891 12:01:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:01:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:01:35 Point started: ret=0 12:01:35 point_skyscan result=0 12:01:36 Check angles 12:01:36 SkyScan query 12:01:36 SkyScan query done: ret=0 az=64.365<-4291 ze=66.54<-7564 Statuses=0009 0008 12:01:36 Msec=0 True Az=64.365 Ze=66.54 Az status=0009 Ze status=0008 12:01:36 Check angles 12:01:36 SkyScan query 12:01:37 SkyScan query done: ret=0 az=81.915<-5461 ze=66.51<-7566 Statuses=0009 0008 12:01:37 Msec=750 True Az=81.915 Ze=66.51 Az status=0009 Ze status=0008 12:01:37 Check angles 12:01:37 SkyScan query 12:01:38 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 12:01:38 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 12:01:38 Check angles 12:01:38 SkyScan query 12:01:39 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 12:01:39 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 12:01:39 Check angles 12:01:39 SkyScan query 12:01:39 SkyScan query done: ret=0 az=135.03<-9002 ze=66.495<-7567 Statuses=0009 0008 12:01:39 Msec=3000 True Az=135.03 Ze=66.495 Az status=0009 Ze status=0008 12:01:40 Check angles 12:01:40 SkyScan query 12:01:40 SkyScan query done: ret=0 az=152.46<-10164 ze=66.495<-7567 Statuses=0009 0008 12:01:40 Msec=3750 True Az=152.46 Ze=66.495 Az status=0009 Ze status=0008 12:01:40 Check angles 12:01:40 SkyScan query 12:01:41 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:01:41 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:01:41 Message to Master queued w/err=0: serial=141891 error=0 12:01:46 Received message from Master: op=Filter serial=141892 12:01:46 Color wheel filter change from 0 to 0 12:01:46 FLIGetFilterPos err=0 currentPosition=0 12:01:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:01:46 Filter is already there-color wheel unchanged 12:01:46 Received message from Master: op=Shutter serial=141893 12:01:46 Shutter LASER close 12:01:46 Received message from Camera: op=State serial=141895 12:01:46 GetSingleValue result=40 Value=cccccccc 12:01:46 SkyScan query 12:01:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:01:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:47 Parameters OK 12:01:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:47 Set A/D data flow result=40 12:01:47 Set A/D channel type result=40 12:01:47 Set A/D encoding result=40 12:01:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:47 Set channel filter=0.000000e+000 result=40 12:01:47 Config A/D Result=40 12:01:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:47 Get A/D filter: -9.255963e+061 result=40 12:01:47 Get A/D value=-858993460 result=40 12:01:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:47 Parameters OK 12:01:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:47 Set A/D data flow result=40 12:01:47 Set A/D channel type result=40 12:01:47 Set A/D encoding result=40 12:01:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:47 Set channel filter=0.000000e+000 result=40 12:01:47 Config A/D Result=40 12:01:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:47 Get A/D filter: -9.255963e+061 result=40 12:01:47 Get A/D value=-858993460 result=40 12:01:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:01:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:01:47 Aux= 12:01:47 Message to Camera, serial 141895 queued 12:02:23 Received message from Master: op=PointingHead serial=141908 12:02:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:02:23 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:02:24 Point started: ret=0 12:02:24 point_skyscan result=0 12:02:25 Check angles 12:02:25 SkyScan query 12:02:25 SkyScan query done: ret=0 az=134.565<-8971 ze=36.21<-9586 Statuses=0009 0009 12:02:25 Msec=0 True Az=134.565 Ze=36.21 Az status=0009 Ze status=0009 12:02:25 Check angles 12:02:25 SkyScan query 12:02:26 SkyScan query done: ret=0 az=116.61<-7774 ze=14.73<-11018 Statuses=0009 0009 12:02:26 Msec=750 True Az=116.61 Ze=14.73 Az status=0009 Ze status=0009 12:02:26 Check angles 12:02:26 SkyScan query 12:02:27 SkyScan query done: ret=0 az=99.33<-6622 ze=-6.21<-12414 Statuses=0009 0009 12:02:27 Msec=1500 True Az=99.33 Ze=-6.21 Az status=0009 Ze status=0009 12:02:27 Check angles 12:02:27 SkyScan query 12:02:27 SkyScan query done: ret=0 az=81.75<-5450 ze=-27.15<-13810 Statuses=0009 0009 12:02:27 Msec=2250 True Az=81.75 Ze=-27.15 Az status=0009 Ze status=0009 12:02:28 Check angles 12:02:28 SkyScan query 12:02:28 SkyScan query done: ret=0 az=64.35<-4290 ze=-38.58<-14572 Statuses=0009 0008 12:02:28 Msec=3000 True Az=64.35 Ze=-38.58 Az status=0009 Ze status=0008 12:02:28 Check angles 12:02:28 SkyScan query 12:02:29 SkyScan query done: ret=0 az=46.86<-3124 ze=-38.52<-14568 Statuses=0009 0008 12:02:29 Msec=3750 True Az=46.86 Ze=-38.52 Az status=0009 Ze status=0008 12:02:29 Check angles 12:02:29 SkyScan query 12:02:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:02:30 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:02:30 Message to Master queued w/err=0: serial=141908 error=0 12:02:35 Received message from Master: op=Filter serial=141909 12:02:35 Color wheel filter change from 0 to 0 12:02:35 FLIGetFilterPos err=0 currentPosition=0 12:02:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:35 Filter is already there-color wheel unchanged 12:02:35 Received message from Master: op=Shutter serial=141910 12:02:35 Shutter LASER close 12:02:35 Received message from Camera: op=State serial=141912 12:02:35 GetSingleValue result=40 Value=cccccccc 12:02:35 SkyScan query 12:02:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:02:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:35 Parameters OK 12:02:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:35 Set A/D data flow result=40 12:02:35 Set A/D channel type result=40 12:02:35 Set A/D encoding result=40 12:02:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:35 Set channel filter=0.000000e+000 result=40 12:02:35 Config A/D Result=40 12:02:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:35 Get A/D filter: -9.255963e+061 result=40 12:02:35 Get A/D value=-858993460 result=40 12:02:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:35 Parameters OK 12:02:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:35 Set A/D data flow result=40 12:02:35 Set A/D channel type result=40 12:02:35 Set A/D encoding result=40 12:02:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:35 Set channel filter=0.000000e+000 result=40 12:02:35 Config A/D Result=40 12:02:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:35 Get A/D filter: -9.255963e+061 result=40 12:02:35 Get A/D value=-858993460 result=40 12:02:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:35 Aux= 12:02:35 Message to Camera, serial 141912 queued 12:03:11 Received message from Master: op=PointingHead serial=141924 12:03:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:03:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:03:12 Point started: ret=0 12:03:12 point_skyscan result=0 12:03:13 Check angles 12:03:13 SkyScan query 12:03:13 SkyScan query done: ret=0 az=64.305<-4287 ze=-68.76<-16584 Statuses=0009 0009 12:03:13 Msec=0 True Az=64.305 Ze=-68.76 Az status=0009 Ze status=0009 12:03:13 Check angles 12:03:13 SkyScan query 12:03:14 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.715<-17981 Statuses=0009 0009 12:03:14 Msec=750 True Az=81.81 Ze=-89.715 Az status=0009 Ze status=0009 12:03:14 Check angles 12:03:14 SkyScan query 12:03:15 SkyScan query done: ret=0 az=99.6<-6640 ze=-111.09<-19406 Statuses=0009 0009 12:03:15 Msec=1500 True Az=99.6 Ze=-111.09 Az status=0009 Ze status=0009 12:03:15 Check angles 12:03:15 SkyScan query 12:03:15 SkyScan query done: ret=0 az=117.18<-7812 ze=-132.015<-20801 Statuses=0009 0009 12:03:15 Msec=2250 True Az=117.18 Ze=-132.015 Az status=0009 Ze status=0009 12:03:16 Check angles 12:03:16 SkyScan query 12:03:16 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 12:03:16 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 12:03:16 Check angles 12:03:16 SkyScan query 12:03:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:03:17 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:03:17 Message to Master queued w/err=0: serial=141924 error=0 12:03:22 Received message from Master: op=Filter serial=141925 12:03:22 Color wheel filter change from 0 to 0 12:03:22 FLIGetFilterPos err=0 currentPosition=0 12:03:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:22 Filter is already there-color wheel unchanged 12:03:22 Received message from Master: op=Shutter serial=141926 12:03:22 Shutter LASER close 12:03:22 Received message from Camera: op=State serial=141928 12:03:22 GetSingleValue result=40 Value=cccccccc 12:03:22 SkyScan query 12:03:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:03:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:23 Parameters OK 12:03:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:23 Set A/D data flow result=40 12:03:23 Set A/D channel type result=40 12:03:23 Set A/D encoding result=40 12:03:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:23 Set channel filter=0.000000e+000 result=40 12:03:23 Config A/D Result=40 12:03:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:23 Get A/D filter: -9.255963e+061 result=40 12:03:23 Get A/D value=-858993460 result=40 12:03:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:23 Parameters OK 12:03:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:23 Set A/D data flow result=40 12:03:23 Set A/D channel type result=40 12:03:23 Set A/D encoding result=40 12:03:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:23 Set channel filter=0.000000e+000 result=40 12:03:23 Config A/D Result=40 12:03:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:23 Get A/D filter: -9.255963e+061 result=40 12:03:23 Get A/D value=-858993460 result=40 12:03:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:23 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:23 Aux= 12:03:23 Message to Camera, serial 141928 queued 12:03:59 Received message from Master: op=PointingHead serial=141941 12:03:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:03:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:04:00 Point started: ret=0 12:04:00 point_skyscan result=0 12:04:01 Check angles 12:04:01 SkyScan query 12:04:01 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 12:04:01 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 12:04:01 Check angles 12:04:01 SkyScan query 12:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:04:02 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:04:02 Message to Master queued w/err=0: serial=141941 error=0 12:04:07 Received message from Master: op=Filter serial=141942 12:04:07 Color wheel filter change from 0 to 0 12:04:07 FLIGetFilterPos err=0 currentPosition=0 12:04:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:07 Filter is already there-color wheel unchanged 12:04:07 Received message from Master: op=Shutter serial=141943 12:04:07 Shutter LASER open 12:04:07 Received message from Camera: op=State serial=141945 12:04:07 GetSingleValue result=40 Value=cccccccc 12:04:07 SkyScan query 12:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:04:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:08 Parameters OK 12:04:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:08 Set A/D data flow result=40 12:04:08 Set A/D channel type result=40 12:04:08 Set A/D encoding result=40 12:04:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:08 Set channel filter=0.000000e+000 result=40 12:04:08 Config A/D Result=40 12:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:08 Get A/D filter: -9.255963e+061 result=40 12:04:08 Get A/D value=-858993460 result=40 12:04:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:08 Parameters OK 12:04:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:08 Set A/D data flow result=40 12:04:08 Set A/D channel type result=40 12:04:08 Set A/D encoding result=40 12:04:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:08 Set channel filter=0.000000e+000 result=40 12:04:08 Config A/D Result=40 12:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:08 Get A/D filter: -9.255963e+061 result=40 12:04:08 Get A/D value=-858993460 result=40 12:04:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:08 Aux= 12:04:08 Message to Camera, serial 141945 queued 12:04:16 Received message from Master: op=Shutter serial=141955 12:04:16 Shutter LASER close 12:04:17 Received message from Master: op=PointingHead serial=141959 12:04:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:04:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:04:17 Point started: ret=0 12:04:17 point_skyscan result=0 12:04:18 Check angles 12:04:18 SkyScan query 12:04:19 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.505<-21567 Statuses=0009 0009 12:04:19 Msec=0 True Az=135.84 Ze=-143.505 Az status=0009 Ze status=0009 12:04:19 Check angles 12:04:19 SkyScan query 12:04:19 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.07<-20138 Statuses=0009 0009 12:04:19 Msec=750 True Az=153.63 Ze=-122.07 Az status=0009 Ze status=0009 12:04:19 Check angles 12:04:19 SkyScan query 12:04:20 SkyScan query done: ret=0 az=171.51<-11434 ze=-100.605<-18707 Statuses=0009 0009 12:04:20 Msec=1500 True Az=171.51 Ze=-100.605 Az status=0009 Ze status=0009 12:04:20 Check angles 12:04:20 SkyScan query 12:04:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.725<-17315 Statuses=0008 0009 12:04:21 Msec=2250 True Az=176.01 Ze=-79.725 Az status=0008 Ze status=0009 12:04:21 Check angles 12:04:21 SkyScan query 12:04:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.74<-15916 Statuses=0008 0009 12:04:22 Msec=3000 True Az=176.01 Ze=-58.74 Az status=0008 Ze status=0009 12:04:22 Check angles 12:04:22 SkyScan query 12:04:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:04:22 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:04:22 Message to Master queued w/err=0: serial=141959 error=0 12:04:27 Received message from Master: op=Filter serial=141960 12:04:27 Color wheel filter change from 0 to 0 12:04:27 FLIGetFilterPos err=0 currentPosition=0 12:04:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:27 Filter is already there-color wheel unchanged 12:04:28 Received message from Master: op=Shutter serial=141961 12:04:28 Shutter LASER close 12:04:28 Received message from Camera: op=State serial=141963 12:04:28 GetSingleValue result=40 Value=cccccccc 12:04:28 SkyScan query 12:04:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:04:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:28 Parameters OK 12:04:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:28 Set A/D data flow result=40 12:04:28 Set A/D channel type result=40 12:04:28 Set A/D encoding result=40 12:04:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:28 Set channel filter=0.000000e+000 result=40 12:04:28 Config A/D Result=40 12:04:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:28 Get A/D filter: -9.255963e+061 result=40 12:04:28 Get A/D value=-858993460 result=40 12:04:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:28 Parameters OK 12:04:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:28 Set A/D data flow result=40 12:04:28 Set A/D channel type result=40 12:04:28 Set A/D encoding result=40 12:04:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:28 Set channel filter=0.000000e+000 result=40 12:04:28 Config A/D Result=40 12:04:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:28 Get A/D filter: -9.255963e+061 result=40 12:04:28 Get A/D value=-858993460 result=40 12:04:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:28 Aux= 12:04:28 Message to Camera, serial 141963 queued 12:05:05 Received message from Master: op=PointingHead serial=141976 12:05:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:05:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:05:05 Point started: ret=0 12:05:05 point_skyscan result=0 12:05:06 Check angles 12:05:06 SkyScan query 12:05:07 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.825<-13455 Statuses=0009 0009 12:05:07 Msec=0 True Az=152.955 Ze=-21.825 Az status=0009 Ze status=0009 12:05:07 Check angles 12:05:07 SkyScan query 12:05:08 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.39<-12026 Statuses=0009 0009 12:05:08 Msec=750 True Az=135.21 Ze=-0.39 Az status=0009 Ze status=0009 12:05:08 Check angles 12:05:08 SkyScan query 12:05:08 SkyScan query done: ret=0 az=117.615<-7841 ze=20.58<-10628 Statuses=0009 0009 12:05:08 Msec=1500 True Az=117.615 Ze=20.58 Az status=0009 Ze status=0009 12:05:08 Check angles 12:05:08 SkyScan query 12:05:09 SkyScan query done: ret=0 az=99.945<-6663 ze=41.94<-9204 Statuses=0009 0009 12:05:09 Msec=2250 True Az=99.945 Ze=41.94 Az status=0009 Ze status=0009 12:05:09 Check angles 12:05:09 SkyScan query 12:05:10 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 12:05:10 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 12:05:10 Check angles 12:05:10 SkyScan query 12:05:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:05:11 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:05:11 Message to Master queued w/err=0: serial=141976 error=0 12:05:16 Received message from Master: op=Filter serial=141977 12:05:16 Color wheel filter change from 0 to 0 12:05:16 FLIGetFilterPos err=0 currentPosition=0 12:05:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:16 Filter is already there-color wheel unchanged 12:05:16 Received message from Master: op=Shutter serial=141978 12:05:16 Shutter LASER close 12:05:16 Received message from Camera: op=State serial=141980 12:05:16 GetSingleValue result=40 Value=cccccccc 12:05:16 SkyScan query 12:05:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:05:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:16 Parameters OK 12:05:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:16 Set A/D data flow result=40 12:05:16 Set A/D channel type result=40 12:05:16 Set A/D encoding result=40 12:05:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:16 Set channel filter=0.000000e+000 result=40 12:05:16 Config A/D Result=40 12:05:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:16 Get A/D filter: -9.255963e+061 result=40 12:05:16 Get A/D value=-858993460 result=40 12:05:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:16 Parameters OK 12:05:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:16 Set A/D data flow result=40 12:05:16 Set A/D channel type result=40 12:05:16 Set A/D encoding result=40 12:05:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:16 Set channel filter=0.000000e+000 result=40 12:05:16 Config A/D Result=40 12:05:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:16 Get A/D filter: -9.255963e+061 result=40 12:05:16 Get A/D value=-858993460 result=40 12:05:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:16 Aux= 12:05:16 Message to Camera, serial 141980 queued 12:05:53 Received message from Master: op=PointingHead serial=141993 12:05:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:05:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:05:54 Point started: ret=0 12:05:54 point_skyscan result=0 12:05:54 Check angles 12:05:54 SkyScan query 12:05:55 SkyScan query done: ret=0 az=109.32<-7288 ze=38.49<-9434 Statuses=0009 0008 12:05:55 Msec=0 True Az=109.32 Ze=38.49 Az status=0009 Ze status=0008 12:05:55 Check angles 12:05:55 SkyScan query 12:05:56 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 12:05:56 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 12:05:56 Check angles 12:05:56 SkyScan query 12:05:56 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 12:05:56 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 12:05:57 Check angles 12:05:57 SkyScan query [UTC 2018-12-14 12:05:57] 12:05:57 SkyScan query done: ret=0 az=161.67<-10778 ze=38.505<-9433 Statuses=0009 0008 12:05:57 Msec=2250 True Az=161.67 Ze=38.505 Az status=0009 Ze status=0008 12:05:57 Check angles 12:05:57 SkyScan query 12:05:58 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:05:58 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:05:58 Check angles 12:05:58 SkyScan query 12:05:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:05:59 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:05:59 Message to Master queued w/err=0: serial=141993 error=0 12:06:04 Received message from Master: op=Filter serial=141994 12:06:04 Color wheel filter change from 0 to 0 12:06:04 FLIGetFilterPos err=0 currentPosition=0 12:06:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:04 Filter is already there-color wheel unchanged 12:06:04 Received message from Master: op=Shutter serial=141995 12:06:04 Shutter LASER close 12:06:04 Received message from Camera: op=State serial=141997 12:06:04 GetSingleValue result=40 Value=cccccccc 12:06:04 SkyScan query 12:06:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:06:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:04 Parameters OK 12:06:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:04 Set A/D data flow result=40 12:06:04 Set A/D channel type result=40 12:06:04 Set A/D encoding result=40 12:06:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:04 Set channel filter=0.000000e+000 result=40 12:06:04 Config A/D Result=40 12:06:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:04 Get A/D filter: -9.255963e+061 result=40 12:06:04 Get A/D value=-858993460 result=40 12:06:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:04 Parameters OK 12:06:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:04 Set A/D data flow result=40 12:06:04 Set A/D channel type result=40 12:06:04 Set A/D encoding result=40 12:06:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:04 Set channel filter=0.000000e+000 result=40 12:06:04 Config A/D Result=40 12:06:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:04 Get A/D filter: -9.255963e+061 result=40 12:06:04 Get A/D value=-858993460 result=40 12:06:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:04 Aux= 12:06:04 Message to Camera, serial 141997 queued 12:06:41 Received message from Master: op=PointingHead serial=142010 12:06:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:06:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:06:42 Point started: ret=0 12:06:42 point_skyscan result=0 12:06:42 Check angles 12:06:42 SkyScan query 12:06:43 SkyScan query done: ret=0 az=152.535<-10169 ze=8.265<-11449 Statuses=0009 0009 12:06:43 Msec=0 True Az=152.535 Ze=8.265 Az status=0009 Ze status=0009 12:06:43 Check angles 12:06:43 SkyScan query 12:06:44 SkyScan query done: ret=0 az=134.55<-8970 ze=-13.08<-12872 Statuses=0009 0009 12:06:44 Msec=750 True Az=134.55 Ze=-13.08 Az status=0009 Ze status=0009 12:06:44 Check angles 12:06:44 SkyScan query 12:06:44 SkyScan query done: ret=0 az=117.105<-7807 ze=-34.11<-14274 Statuses=0009 0009 12:06:44 Msec=1500 True Az=117.105 Ze=-34.11 Az status=0009 Ze status=0009 12:06:45 Check angles 12:06:45 SkyScan query 12:06:45 SkyScan query done: ret=0 az=99.705<-6647 ze=-51.585<-15439 Statuses=0009 0009 12:06:45 Msec=2250 True Az=99.705 Ze=-51.585 Az status=0009 Ze status=0009 12:06:45 Check angles 12:06:45 SkyScan query 12:06:46 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 12:06:46 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 12:06:46 Check angles 12:06:46 SkyScan query 12:06:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:06:47 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:06:47 Message to Master queued w/err=0: serial=142010 error=0 12:06:52 Received message from Master: op=Filter serial=142011 12:06:52 Color wheel filter change from 0 to 0 12:06:52 FLIGetFilterPos err=0 currentPosition=0 12:06:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:52 Filter is already there-color wheel unchanged 12:06:52 Received message from Master: op=Shutter serial=142012 12:06:52 Shutter LASER close 12:06:52 Received message from Camera: op=State serial=142014 12:06:52 GetSingleValue result=40 Value=cccccccc 12:06:52 SkyScan query 12:06:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:06:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:53 Parameters OK 12:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:53 Set A/D data flow result=40 12:06:53 Set A/D channel type result=40 12:06:53 Set A/D encoding result=40 12:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:53 Set channel filter=0.000000e+000 result=40 12:06:53 Config A/D Result=40 12:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:53 Get A/D filter: -9.255963e+061 result=40 12:06:53 Get A/D value=-858993460 result=40 12:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:53 Parameters OK 12:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:53 Set A/D data flow result=40 12:06:53 Set A/D channel type result=40 12:06:53 Set A/D encoding result=40 12:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:53 Set channel filter=0.000000e+000 result=40 12:06:53 Config A/D Result=40 12:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:53 Get A/D filter: -9.255963e+061 result=40 12:06:53 Get A/D value=-858993460 result=40 12:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:53 Aux= 12:06:53 Message to Camera, serial 142014 queued 12:07:29 Received message from Master: op=PointingHead serial=142027 12:07:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:07:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:07:30 Point started: ret=0 12:07:30 point_skyscan result=0 12:07:30 Check angles 12:07:30 SkyScan query 12:07:31 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.195<-17413 Statuses=0009 0009 12:07:31 Msec=0 True Az=108.93 Ze=-81.195 Az status=0009 Ze status=0009 12:07:31 Check angles 12:07:31 SkyScan query 12:07:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.6<-18840 Statuses=0008 0009 12:07:32 Msec=750 True Az=112.995 Ze=-102.6 Az status=0008 Ze status=0009 12:07:32 Check angles 12:07:32 SkyScan query 12:07:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.585<-20239 Statuses=0008 0009 12:07:33 Msec=1500 True Az=112.995 Ze=-123.585 Az status=0008 Ze status=0009 12:07:33 Check angles 12:07:33 SkyScan query 12:07:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 12:07:33 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 12:07:34 Check angles 12:07:34 SkyScan query 12:07:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.84<-23056 Statuses=0008 0009 12:07:34 Msec=3000 True Az=112.995 Ze=-165.84 Az status=0008 Ze status=0009 12:07:34 Check angles 12:07:34 SkyScan query 12:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:07:35 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:07:35 Message to Master queued w/err=0: serial=142027 error=0 12:07:40 Received message from Master: op=Filter serial=142028 12:07:40 Color wheel filter change from 0 to 0 12:07:40 FLIGetFilterPos err=0 currentPosition=0 12:07:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:40 Filter is already there-color wheel unchanged 12:07:40 Received message from Master: op=Shutter serial=142029 12:07:40 Shutter LASER open 12:07:40 Received message from Camera: op=State serial=142031 12:07:40 GetSingleValue result=40 Value=cccccccc 12:07:40 SkyScan query 12:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:07:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:41 Parameters OK 12:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:41 Set A/D data flow result=40 12:07:41 Set A/D channel type result=40 12:07:41 Set A/D encoding result=40 12:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:41 Set channel filter=0.000000e+000 result=40 12:07:41 Config A/D Result=40 12:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:41 Get A/D filter: -9.255963e+061 result=40 12:07:41 Get A/D value=-858993460 result=40 12:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:41 Parameters OK 12:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:41 Set A/D data flow result=40 12:07:41 Set A/D channel type result=40 12:07:41 Set A/D encoding result=40 12:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:41 Set channel filter=0.000000e+000 result=40 12:07:41 Config A/D Result=40 12:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:41 Get A/D filter: -9.255963e+061 result=40 12:07:41 Get A/D value=-858993460 result=40 12:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:41 Aux= 12:07:41 Message to Camera, serial 142031 queued 12:07:49 Received message from Master: op=Shutter serial=142041 12:07:49 Shutter LASER close 12:07:50 Received message from Master: op=PointingHead serial=142045 12:07:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:07:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:07:50 Point started: ret=0 12:07:50 point_skyscan result=0 12:07:51 Check angles 12:07:51 SkyScan query 12:07:51 SkyScan query done: ret=0 az=89.82<-5988 ze=157.125<-1525 Statuses=0009 0009 12:07:51 Msec=0 True Az=89.82 Ze=157.125 Az status=0009 Ze status=0009 12:07:52 Check angles 12:07:52 SkyScan query 12:07:52 SkyScan query done: ret=0 az=71.985<-4799 ze=135.72<-2952 Statuses=0009 0009 12:07:52 Msec=750 True Az=71.985 Ze=135.72 Az status=0009 Ze status=0009 12:07:52 Check angles 12:07:52 SkyScan query 12:07:53 SkyScan query done: ret=0 az=54.525<-3635 ze=114.72<-4352 Statuses=0009 0009 12:07:53 Msec=1500 True Az=54.525 Ze=114.72 Az status=0009 Ze status=0009 12:07:53 Check angles 12:07:53 SkyScan query 12:07:54 SkyScan query done: ret=0 az=40.98<-2732 ze=93.795<-5747 Statuses=0009 0009 12:07:54 Msec=2250 True Az=40.98 Ze=93.795 Az status=0009 Ze status=0009 12:07:54 Check angles 12:07:54 SkyScan query 12:07:54 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 12:07:54 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 12:07:55 Check angles 12:07:55 SkyScan query 12:07:55 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 12:07:55 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 12:07:55 Check angles 12:07:55 SkyScan query 12:07:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:07:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:07:56 Message to Master queued w/err=0: serial=142045 error=0 12:08:01 Received message from Master: op=Filter serial=142046 12:08:01 Color wheel filter change from 0 to 0 12:08:01 FLIGetFilterPos err=0 currentPosition=0 12:08:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:01 Filter is already there-color wheel unchanged 12:08:01 Received message from Master: op=Shutter serial=142047 12:08:01 Shutter LASER close 12:08:01 Received message from Camera: op=State serial=142049 12:08:01 GetSingleValue result=40 Value=cccccccc 12:08:01 SkyScan query 12:08:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:08:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:02 Parameters OK 12:08:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:02 Set A/D data flow result=40 12:08:02 Set A/D channel type result=40 12:08:02 Set A/D encoding result=40 12:08:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:02 Set channel filter=0.000000e+000 result=40 12:08:02 Config A/D Result=40 12:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:02 Get A/D filter: -9.255963e+061 result=40 12:08:02 Get A/D value=-858993460 result=40 12:08:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:02 Parameters OK 12:08:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:02 Set A/D data flow result=40 12:08:02 Set A/D channel type result=40 12:08:02 Set A/D encoding result=40 12:08:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:02 Set channel filter=0.000000e+000 result=40 12:08:02 Config A/D Result=40 12:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:02 Get A/D filter: -9.255963e+061 result=40 12:08:02 Get A/D value=-858993460 result=40 12:08:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:02 Aux= 12:08:02 Message to Camera, serial 142049 queued 12:08:39 Received message from Master: op=PointingHead serial=142062 12:08:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:08:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:08:39 Point started: ret=0 12:08:39 point_skyscan result=0 12:08:40 Check angles 12:08:40 SkyScan query 12:08:40 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 12:08:40 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 12:08:40 Check angles 12:08:40 SkyScan query 12:08:41 SkyScan query done: ret=0 az=81.465<-5431 ze=66.495<-7567 Statuses=0009 0008 12:08:41 Msec=750 True Az=81.465 Ze=66.495 Az status=0009 Ze status=0008 12:08:41 Check angles 12:08:41 SkyScan query 12:08:42 SkyScan query done: ret=0 az=99.24<-6616 ze=66.495<-7567 Statuses=0009 0008 12:08:42 Msec=1500 True Az=99.24 Ze=66.495 Az status=0009 Ze status=0008 12:08:42 Check angles 12:08:42 SkyScan query 12:08:43 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 12:08:43 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 12:08:43 Check angles 12:08:43 SkyScan query 12:08:43 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 12:08:43 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 12:08:43 Check angles 12:08:43 SkyScan query 12:08:44 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 12:08:44 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 12:08:44 Check angles 12:08:44 SkyScan query 12:08:45 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:08:45 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:08:45 Message to Master queued w/err=0: serial=142062 error=0 12:08:50 Received message from Master: op=Filter serial=142063 12:08:50 Color wheel filter change from 0 to 0 12:08:50 FLIGetFilterPos err=0 currentPosition=0 12:08:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:50 Filter is already there-color wheel unchanged 12:08:50 Received message from Master: op=Shutter serial=142064 12:08:50 Shutter LASER close 12:08:50 Received message from Camera: op=State serial=142066 12:08:50 GetSingleValue result=40 Value=cccccccc 12:08:50 SkyScan query 12:08:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:08:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:51 Parameters OK 12:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:51 Set A/D data flow result=40 12:08:51 Set A/D channel type result=40 12:08:51 Set A/D encoding result=40 12:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:51 Set channel filter=0.000000e+000 result=40 12:08:51 Config A/D Result=40 12:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:51 Get A/D filter: -9.255963e+061 result=40 12:08:51 Get A/D value=-858993460 result=40 12:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:51 Parameters OK 12:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:51 Set A/D data flow result=40 12:08:51 Set A/D channel type result=40 12:08:51 Set A/D encoding result=40 12:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:51 Set channel filter=0.000000e+000 result=40 12:08:51 Config A/D Result=40 12:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:51 Get A/D filter: -9.255963e+061 result=40 12:08:51 Get A/D value=-858993460 result=40 12:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:51 Aux= 12:08:51 Message to Camera, serial 142066 queued 12:09:27 Received message from Master: op=PointingHead serial=142079 12:09:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:09:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:09:28 Point started: ret=0 12:09:28 point_skyscan result=0 12:09:29 Check angles 12:09:29 SkyScan query 12:09:29 SkyScan query done: ret=0 az=135.075<-9005 ze=36.825<-9545 Statuses=0009 0009 12:09:29 Msec=0 True Az=135.075 Ze=36.825 Az status=0009 Ze status=0009 12:09:29 Check angles 12:09:29 SkyScan query 12:09:30 SkyScan query done: ret=0 az=117.195<-7813 ze=15.48<-10968 Statuses=0009 0009 12:09:30 Msec=750 True Az=117.195 Ze=15.48 Az status=0009 Ze status=0009 12:09:30 Check angles 12:09:30 SkyScan query 12:09:31 SkyScan query done: ret=0 az=99.435<-6629 ze=-6.045<-12403 Statuses=0009 0009 12:09:31 Msec=1500 True Az=99.435 Ze=-6.045 Az status=0009 Ze status=0009 12:09:31 Check angles 12:09:31 SkyScan query 12:09:31 SkyScan query done: ret=0 az=81.96<-5464 ze=-26.97<-13798 Statuses=0009 0009 12:09:31 Msec=2250 True Az=81.96 Ze=-26.97 Az status=0009 Ze status=0009 12:09:32 Check angles 12:09:32 SkyScan query 12:09:32 SkyScan query done: ret=0 az=64.425<-4295 ze=-38.58<-14572 Statuses=0009 0008 12:09:32 Msec=3000 True Az=64.425 Ze=-38.58 Az status=0009 Ze status=0008 12:09:32 Check angles 12:09:32 SkyScan query 12:09:33 SkyScan query done: ret=0 az=46.59<-3106 ze=-38.52<-14568 Statuses=0009 0008 12:09:33 Msec=3750 True Az=46.59 Ze=-38.52 Az status=0009 Ze status=0008 12:09:33 Check angles 12:09:33 SkyScan query 12:09:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:09:34 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:09:34 Message to Master queued w/err=0: serial=142079 error=0 12:09:39 Received message from Master: op=Filter serial=142080 12:09:39 Color wheel filter change from 0 to 0 12:09:39 FLIGetFilterPos err=0 currentPosition=0 12:09:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:39 Filter is already there-color wheel unchanged 12:09:39 Received message from Master: op=Shutter serial=142081 12:09:39 Shutter LASER close 12:09:39 Received message from Camera: op=State serial=142083 12:09:39 GetSingleValue result=40 Value=cccccccc 12:09:39 SkyScan query 12:09:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:09:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:40 Parameters OK 12:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:40 Set A/D data flow result=40 12:09:40 Set A/D channel type result=40 12:09:40 Set A/D encoding result=40 12:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:40 Set channel filter=0.000000e+000 result=40 12:09:40 Config A/D Result=40 12:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:40 Get A/D filter: -9.255963e+061 result=40 12:09:40 Get A/D value=-858993460 result=40 12:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:40 Parameters OK 12:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:40 Set A/D data flow result=40 12:09:40 Set A/D channel type result=40 12:09:40 Set A/D encoding result=40 12:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:40 Set channel filter=0.000000e+000 result=40 12:09:40 Config A/D Result=40 12:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:40 Get A/D filter: -9.255963e+061 result=40 12:09:40 Get A/D value=-858993460 result=40 12:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:40 Aux= 12:09:40 Message to Camera, serial 142083 queued 12:10:16 Received message from Master: op=PointingHead serial=142096 12:10:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:10:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:10:17 Point started: ret=0 12:10:17 point_skyscan result=0 12:10:17 Check angles 12:10:17 SkyScan query 12:10:18 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.85<-16590 Statuses=0009 0009 12:10:18 Msec=0 True Az=64.425 Ze=-68.85 Az status=0009 Ze status=0009 12:10:18 Check angles 12:10:18 SkyScan query 12:10:19 SkyScan query done: ret=0 az=82.365<-5491 ze=-90.195<-18013 Statuses=0009 0009 12:10:19 Msec=750 True Az=82.365 Ze=-90.195 Az status=0009 Ze status=0009 12:10:19 Check angles 12:10:19 SkyScan query 12:10:20 SkyScan query done: ret=0 az=99.84<-6656 ze=-111.165<-19411 Statuses=0009 0009 12:10:20 Msec=1500 True Az=99.84 Ze=-111.165 Az status=0009 Ze status=0009 12:10:20 Check angles 12:10:20 SkyScan query 12:10:20 SkyScan query done: ret=0 az=117.27<-7818 ze=-132.09<-20806 Statuses=0009 0009 12:10:20 Msec=2250 True Az=117.27 Ze=-132.09 Az status=0009 Ze status=0009 12:10:20 Check angles 12:10:20 SkyScan query 12:10:21 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.57<-21438 Statuses=0009 0008 12:10:21 Msec=3000 True Az=131.025 Ze=-141.57 Az status=0009 Ze status=0008 12:10:21 Check angles 12:10:21 SkyScan query 12:10:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 12:10:22 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 12:10:22 Message to Master queued w/err=0: serial=142096 error=0 12:10:27 Received message from Master: op=Filter serial=142097 12:10:27 Color wheel filter change from 0 to 0 12:10:27 FLIGetFilterPos err=0 currentPosition=0 12:10:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:27 Filter is already there-color wheel unchanged 12:10:27 Received message from Master: op=Shutter serial=142098 12:10:27 Shutter LASER close 12:10:27 Received message from Camera: op=State serial=142100 12:10:27 GetSingleValue result=40 Value=cccccccc 12:10:27 SkyScan query 12:10:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:10:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:28 Parameters OK 12:10:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:28 Set A/D data flow result=40 12:10:28 Set A/D channel type result=40 12:10:28 Set A/D encoding result=40 12:10:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:28 Set channel filter=0.000000e+000 result=40 12:10:28 Config A/D Result=40 12:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:28 Get A/D filter: -9.255963e+061 result=40 12:10:28 Get A/D value=-858993460 result=40 12:10:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:28 Parameters OK 12:10:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:28 Set A/D data flow result=40 12:10:28 Set A/D channel type result=40 12:10:28 Set A/D encoding result=40 12:10:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:28 Set channel filter=0.000000e+000 result=40 12:10:28 Config A/D Result=40 12:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:28 Get A/D filter: -9.255963e+061 result=40 12:10:28 Get A/D value=-858993460 result=40 12:10:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:10:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:10:28 Aux= 12:10:28 Message to Camera, serial 142100 queued 12:11:04 Received message from Master: op=PointingHead serial=142113 12:11:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:11:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:11:05 Point started: ret=0 12:11:05 point_skyscan result=0 12:11:06 Check angles 12:11:06 SkyScan query 12:11:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 12:11:06 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 12:11:06 Check angles 12:11:06 SkyScan query 12:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:11:07 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:11:07 Message to Master queued w/err=0: serial=142113 error=0 12:11:12 Received message from Master: op=Filter serial=142114 12:11:12 Color wheel filter change from 0 to 0 12:11:12 FLIGetFilterPos err=0 currentPosition=0 12:11:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:12 Filter is already there-color wheel unchanged 12:11:12 Received message from Master: op=Shutter serial=142115 12:11:12 Shutter LASER open 12:11:12 Received message from Camera: op=State serial=142117 12:11:12 GetSingleValue result=40 Value=cccccccc 12:11:12 SkyScan query 12:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:11:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:13 Parameters OK 12:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:13 Set A/D data flow result=40 12:11:13 Set A/D channel type result=40 12:11:13 Set A/D encoding result=40 12:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:13 Set channel filter=0.000000e+000 result=40 12:11:13 Config A/D Result=40 12:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:13 Get A/D filter: -9.255963e+061 result=40 12:11:13 Get A/D value=-858993460 result=40 12:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:13 Parameters OK 12:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:13 Set A/D data flow result=40 12:11:13 Set A/D channel type result=40 12:11:13 Set A/D encoding result=40 12:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:13 Set channel filter=0.000000e+000 result=40 12:11:13 Config A/D Result=40 12:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:13 Get A/D filter: -9.255963e+061 result=40 12:11:13 Get A/D value=-858993460 result=40 12:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:13 Aux= 12:11:13 Message to Camera, serial 142117 queued 12:11:21 Received message from Master: op=Shutter serial=142127 12:11:21 Shutter LASER close 12:11:22 Received message from Master: op=PointingHead serial=142131 12:11:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:11:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:11:22 Point started: ret=0 12:11:22 point_skyscan result=0 12:11:23 Check angles 12:11:23 SkyScan query 12:11:24 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.415<-21561 Statuses=0009 0009 12:11:24 Msec=0 True Az=135.825 Ze=-143.415 Az status=0009 Ze status=0009 12:11:24 Check angles 12:11:24 SkyScan query 12:11:24 SkyScan query done: ret=0 az=153.345<-10223 ze=-122.43<-20162 Statuses=0009 0009 12:11:24 Msec=750 True Az=153.345 Ze=-122.43 Az status=0009 Ze status=0009 12:11:24 Check angles 12:11:24 SkyScan query 12:11:25 SkyScan query done: ret=0 az=170.85<-11390 ze=-101.535<-18769 Statuses=0009 0009 12:11:25 Msec=1500 True Az=170.85 Ze=-101.535 Az status=0009 Ze status=0009 12:11:25 Check angles 12:11:25 SkyScan query 12:11:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.535<-17369 Statuses=0008 0009 12:11:26 Msec=2250 True Az=176.01 Ze=-80.535 Az status=0008 Ze status=0009 12:11:26 Check angles 12:11:26 SkyScan query 12:11:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.595<-15973 Statuses=0008 0009 12:11:27 Msec=3000 True Az=176.01 Ze=-59.595 Az status=0008 Ze status=0009 12:11:27 Check angles 12:11:27 SkyScan query 12:11:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:11:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:11:27 Message to Master queued w/err=0: serial=142131 error=0 12:11:32 Received message from Master: op=Filter serial=142132 12:11:32 Color wheel filter change from 0 to 0 12:11:32 FLIGetFilterPos err=0 currentPosition=0 12:11:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:32 Filter is already there-color wheel unchanged 12:11:32 Received message from Master: op=Shutter serial=142133 12:11:32 Shutter LASER close 12:11:33 Received message from Camera: op=State serial=142135 12:11:33 GetSingleValue result=40 Value=cccccccc 12:11:33 SkyScan query 12:11:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:11:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:33 Parameters OK 12:11:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:33 Set A/D data flow result=40 12:11:33 Set A/D channel type result=40 12:11:33 Set A/D encoding result=40 12:11:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:33 Set channel filter=0.000000e+000 result=40 12:11:33 Config A/D Result=40 12:11:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:33 Get A/D filter: -9.255963e+061 result=40 12:11:33 Get A/D value=-858993460 result=40 12:11:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:33 Parameters OK 12:11:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:33 Set A/D data flow result=40 12:11:33 Set A/D channel type result=40 12:11:33 Set A/D encoding result=40 12:11:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:33 Set channel filter=0.000000e+000 result=40 12:11:33 Config A/D Result=40 12:11:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:33 Get A/D filter: -9.255963e+061 result=40 12:11:33 Get A/D value=-858993460 result=40 12:11:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:33 Aux= 12:11:33 Message to Camera, serial 142135 queued 12:12:09 Received message from Master: op=PointingHead serial=142147 12:12:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:12:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:12:09 Point started: ret=0 12:12:09 point_skyscan result=0 12:12:10 Check angles 12:12:10 SkyScan query 12:12:11 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.005<-13467 Statuses=0009 0009 12:12:11 Msec=0 True Az=153.225 Ze=-22.005 Az status=0009 Ze status=0009 12:12:11 Check angles 12:12:11 SkyScan query 12:12:11 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.005<-12067 Statuses=0009 0009 12:12:11 Msec=750 True Az=135.78 Ze=-1.005 Az status=0009 Ze status=0009 12:12:12 Check angles 12:12:12 SkyScan query 12:12:12 SkyScan query done: ret=0 az=118.215<-7881 ze=19.905<-10673 Statuses=0009 0009 12:12:12 Msec=1500 True Az=118.215 Ze=19.905 Az status=0009 Ze status=0009 12:12:12 Check angles 12:12:12 SkyScan query 12:12:13 SkyScan query done: ret=0 az=100.455<-6697 ze=41.34<-9244 Statuses=0009 0009 12:12:13 Msec=2250 True Az=100.455 Ze=41.34 Az status=0009 Ze status=0009 12:12:13 Check angles 12:12:13 SkyScan query 12:12:14 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 12:12:14 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 12:12:14 Check angles 12:12:14 SkyScan query 12:12:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:12:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:12:15 Message to Master queued w/err=0: serial=142147 error=0 12:12:20 Received message from Master: op=Filter serial=142148 12:12:20 Color wheel filter change from 0 to 0 12:12:20 FLIGetFilterPos err=0 currentPosition=0 12:12:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:20 Filter is already there-color wheel unchanged 12:12:20 Received message from Master: op=Shutter serial=142149 12:12:20 Shutter LASER close 12:12:20 Received message from Camera: op=State serial=142151 12:12:20 GetSingleValue result=40 Value=cccccccc 12:12:20 SkyScan query 12:12:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:12:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:20 Parameters OK 12:12:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:20 Set A/D data flow result=40 12:12:20 Set A/D channel type result=40 12:12:20 Set A/D encoding result=40 12:12:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:20 Set channel filter=0.000000e+000 result=40 12:12:20 Config A/D Result=40 12:12:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:20 Get A/D filter: -9.255963e+061 result=40 12:12:20 Get A/D value=-858993460 result=40 12:12:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:20 Parameters OK 12:12:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:20 Set A/D data flow result=40 12:12:20 Set A/D channel type result=40 12:12:20 Set A/D encoding result=40 12:12:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:20 Set channel filter=0.000000e+000 result=40 12:12:20 Config A/D Result=40 12:12:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:20 Get A/D filter: -9.255963e+061 result=40 12:12:20 Get A/D value=-858993460 result=40 12:12:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:20 Aux= 12:12:20 Message to Camera, serial 142151 queued 12:12:57 Received message from Master: op=PointingHead serial=142164 12:12:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:12:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:12:57 Point started: ret=0 12:12:57 point_skyscan result=0 12:12:58 Check angles 12:12:58 SkyScan query 12:12:59 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 12:12:59 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 12:12:59 Check angles 12:12:59 SkyScan query 12:13:00 SkyScan query done: ret=0 az=126.57<-8438 ze=38.49<-9434 Statuses=0009 0008 12:13:00 Msec=750 True Az=126.57 Ze=38.49 Az status=0009 Ze status=0008 12:13:00 Check angles 12:13:00 SkyScan query 12:13:00 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 12:13:00 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 12:13:01 Check angles 12:13:01 SkyScan query 12:13:01 SkyScan query done: ret=0 az=162.195<-10813 ze=38.505<-9433 Statuses=0009 0008 12:13:01 Msec=2250 True Az=162.195 Ze=38.505 Az status=0009 Ze status=0008 12:13:01 Check angles 12:13:01 SkyScan query 12:13:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 12:13:02 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 12:13:02 Check angles 12:13:02 SkyScan query 12:13:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:13:03 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:13:03 Message to Master queued w/err=0: serial=142164 error=0 12:13:08 Received message from Master: op=Filter serial=142165 12:13:08 Color wheel filter change from 0 to 0 12:13:08 FLIGetFilterPos err=0 currentPosition=0 12:13:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:08 Filter is already there-color wheel unchanged 12:13:08 Received message from Master: op=Shutter serial=142166 12:13:08 Shutter LASER close 12:13:08 Received message from Camera: op=State serial=142168 12:13:08 GetSingleValue result=40 Value=cccccccc 12:13:08 SkyScan query 12:13:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:13:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:08 Parameters OK 12:13:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:08 Set A/D data flow result=40 12:13:08 Set A/D channel type result=40 12:13:08 Set A/D encoding result=40 12:13:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:08 Set channel filter=0.000000e+000 result=40 12:13:08 Config A/D Result=40 12:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:08 Get A/D filter: -9.255963e+061 result=40 12:13:08 Get A/D value=-858993460 result=40 12:13:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:08 Parameters OK 12:13:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:08 Set A/D data flow result=40 12:13:08 Set A/D channel type result=40 12:13:08 Set A/D encoding result=40 12:13:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:08 Set channel filter=0.000000e+000 result=40 12:13:08 Config A/D Result=40 12:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:08 Get A/D filter: -9.255963e+061 result=40 12:13:08 Get A/D value=-858993460 result=40 12:13:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:08 Aux= 12:13:08 Message to Camera, serial 142168 queued 12:13:45 Received message from Master: op=PointingHead serial=142181 12:13:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:13:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:13:46 Point started: ret=0 12:13:46 point_skyscan result=0 12:13:46 Check angles 12:13:46 SkyScan query 12:13:47 SkyScan query done: ret=0 az=152.595<-10173 ze=8.34<-11444 Statuses=0009 0009 12:13:47 Msec=0 True Az=152.595 Ze=8.34 Az status=0009 Ze status=0009 12:13:47 Check angles 12:13:47 SkyScan query 12:13:48 SkyScan query done: ret=0 az=135.045<-9003 ze=-12.54<-12836 Statuses=0009 0009 12:13:48 Msec=750 True Az=135.045 Ze=-12.54 Az status=0009 Ze status=0009 12:13:48 Check angles 12:13:48 SkyScan query 12:13:48 SkyScan query done: ret=0 az=117.255<-7817 ze=-34.005<-14267 Statuses=0009 0009 12:13:48 Msec=1500 True Az=117.255 Ze=-34.005 Az status=0009 Ze status=0009 12:13:49 Check angles 12:13:49 SkyScan query 12:13:49 SkyScan query done: ret=0 az=99.885<-6659 ze=-51.57<-15438 Statuses=0009 0009 12:13:49 Msec=2250 True Az=99.885 Ze=-51.57 Az status=0009 Ze status=0009 12:13:49 Check angles 12:13:49 SkyScan query 12:13:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 12:13:50 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 12:13:50 Check angles 12:13:50 SkyScan query 12:13:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:13:51 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:13:51 Message to Master queued w/err=0: serial=142181 error=0 12:13:56 Received message from Master: op=Filter serial=142182 12:13:56 Color wheel filter change from 0 to 0 12:13:56 FLIGetFilterPos err=0 currentPosition=0 12:13:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:56 Filter is already there-color wheel unchanged 12:13:56 Received message from Master: op=Shutter serial=142183 12:13:56 Shutter LASER close 12:13:56 Received message from Camera: op=State serial=142185 12:13:56 GetSingleValue result=40 Value=cccccccc 12:13:56 SkyScan query 12:13:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:13:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:56 Parameters OK 12:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:56 Set A/D data flow result=40 12:13:56 Set A/D channel type result=40 12:13:56 Set A/D encoding result=40 12:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:56 Set channel filter=0.000000e+000 result=40 12:13:56 Config A/D Result=40 12:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:56 Get A/D filter: -9.255963e+061 result=40 12:13:56 Get A/D value=-858993460 result=40 12:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:56 Parameters OK 12:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:56 Set A/D data flow result=40 12:13:56 Set A/D channel type result=40 12:13:56 Set A/D encoding result=40 12:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:56 Set channel filter=0.000000e+000 result=40 12:13:56 Config A/D Result=40 12:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:56 Get A/D filter: -9.255963e+061 result=40 12:13:56 Get A/D value=-858993460 result=40 12:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:56 Aux= 12:13:56 Message to Camera, serial 142185 queued 12:14:33 Received message from Master: op=PointingHead serial=142198 12:14:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:14:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:14:34 Point started: ret=0 12:14:34 point_skyscan result=0 12:14:34 Check angles 12:14:34 SkyScan query 12:14:35 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.375<-17425 Statuses=0009 0009 12:14:35 Msec=0 True Az=109.185 Ze=-81.375 Az status=0009 Ze status=0009 12:14:35 Check angles 12:14:35 SkyScan query 12:14:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.345<-18823 Statuses=0008 0009 12:14:36 Msec=750 True Az=112.995 Ze=-102.345 Az status=0008 Ze status=0009 12:14:36 Check angles 12:14:36 SkyScan query 12:14:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.3<-20220 Statuses=0008 0009 12:14:36 Msec=1500 True Az=112.995 Ze=-123.3 Az status=0008 Ze status=0009 12:14:37 Check angles 12:14:37 SkyScan query 12:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.24<-21616 Statuses=0008 0009 12:14:37 Msec=2250 True Az=112.995 Ze=-144.24 Az status=0008 Ze status=0009 12:14:37 Check angles 12:14:37 SkyScan query 12:14:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.18<-23012 Statuses=0008 0009 12:14:38 Msec=3000 True Az=112.995 Ze=-165.18 Az status=0008 Ze status=0009 12:14:38 Check angles 12:14:38 SkyScan query 12:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 12:14:39 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 12:14:39 Message to Master queued w/err=0: serial=142198 error=0 12:14:44 Received message from Master: op=Filter serial=142199 12:14:44 Color wheel filter change from 0 to 0 12:14:44 FLIGetFilterPos err=0 currentPosition=0 12:14:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:44 Filter is already there-color wheel unchanged 12:14:44 Received message from Master: op=Shutter serial=142200 12:14:44 Shutter LASER open 12:14:44 Received message from Camera: op=State serial=142202 12:14:44 GetSingleValue result=40 Value=cccccccc 12:14:44 SkyScan query 12:14:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:14:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:45 Parameters OK 12:14:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:45 Set A/D data flow result=40 12:14:45 Set A/D channel type result=40 12:14:45 Set A/D encoding result=40 12:14:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:45 Set channel filter=0.000000e+000 result=40 12:14:45 Config A/D Result=40 12:14:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:45 Get A/D filter: -9.255963e+061 result=40 12:14:45 Get A/D value=-858993460 result=40 12:14:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:45 Parameters OK 12:14:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:45 Set A/D data flow result=40 12:14:45 Set A/D channel type result=40 12:14:45 Set A/D encoding result=40 12:14:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:45 Set channel filter=0.000000e+000 result=40 12:14:45 Config A/D Result=40 12:14:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:45 Get A/D filter: -9.255963e+061 result=40 12:14:45 Get A/D value=-858993460 result=40 12:14:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:45 Aux= 12:14:45 Message to Camera, serial 142202 queued 12:14:53 Received message from Master: op=Shutter serial=142212 12:14:53 Shutter LASER close 12:14:54 Received message from Master: op=PointingHead serial=142216 12:14:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:14:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:14:54 Point started: ret=0 12:14:54 point_skyscan result=0 12:14:55 Check angles 12:14:55 SkyScan query 12:14:55 SkyScan query done: ret=0 az=90.135<-6009 ze=157.53<-1498 Statuses=0009 0009 12:14:55 Msec=0 True Az=90.135 Ze=157.53 Az status=0009 Ze status=0009 12:14:55 Check angles 12:14:55 SkyScan query 12:14:56 SkyScan query done: ret=0 az=72.72<-4848 ze=136.53<-2898 Statuses=0009 0009 12:14:56 Msec=750 True Az=72.72 Ze=136.53 Az status=0009 Ze status=0009 12:14:56 Check angles 12:14:56 SkyScan query 12:14:57 SkyScan query done: ret=0 az=54.81<-3654 ze=115.17<-4322 Statuses=0009 0009 12:14:57 Msec=1500 True Az=54.81 Ze=115.17 Az status=0009 Ze status=0009 12:14:57 Check angles 12:14:57 SkyScan query 12:14:57 SkyScan query done: ret=0 az=40.98<-2732 ze=93.78<-5748 Statuses=0009 0009 12:14:57 Msec=2250 True Az=40.98 Ze=93.78 Az status=0009 Ze status=0009 12:14:58 Check angles 12:14:58 SkyScan query 12:14:58 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 12:14:58 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 12:14:58 Check angles 12:14:58 SkyScan query 12:14:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.215<-8519 Statuses=0008 0009 12:14:59 Msec=3750 True Az=40.995 Ze=52.215 Az status=0008 Ze status=0009 12:14:59 Check angles 12:14:59 SkyScan query 12:15:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:15:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:15:00 Message to Master queued w/err=0: serial=142216 error=0 12:15:05 Received message from Master: op=Filter serial=142217 12:15:05 Color wheel filter change from 0 to 0 12:15:05 FLIGetFilterPos err=0 currentPosition=0 12:15:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:05 Filter is already there-color wheel unchanged 12:15:05 Received message from Master: op=Shutter serial=142218 12:15:05 Shutter LASER close 12:15:05 Received message from Camera: op=State serial=142220 12:15:05 GetSingleValue result=40 Value=cccccccc 12:15:05 SkyScan query 12:15:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:15:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:06 Parameters OK 12:15:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:06 Set A/D data flow result=40 12:15:06 Set A/D channel type result=40 12:15:06 Set A/D encoding result=40 12:15:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:06 Set channel filter=0.000000e+000 result=40 12:15:06 Config A/D Result=40 12:15:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:06 Get A/D filter: -9.255963e+061 result=40 12:15:06 Get A/D value=-858993460 result=40 12:15:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:06 Parameters OK 12:15:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:06 Set A/D data flow result=40 12:15:06 Set A/D channel type result=40 12:15:06 Set A/D encoding result=40 12:15:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:06 Set channel filter=0.000000e+000 result=40 12:15:06 Config A/D Result=40 12:15:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:06 Get A/D filter: -9.255963e+061 result=40 12:15:06 Get A/D value=-858993460 result=40 12:15:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:06 Aux= 12:15:06 Message to Camera, serial 142220 queued 12:15:27 Received message from Master: op=Identify serial=142221 12:15:43 Received message from Master: op=PointingHead serial=142236 12:15:43 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:15:43 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:15:43 Point started: ret=0 12:15:43 point_skyscan result=0 12:15:44 Check angles 12:15:44 SkyScan query 12:15:44 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 12:15:44 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 12:15:44 Check angles 12:15:44 SkyScan query 12:15:45 SkyScan query done: ret=0 az=81.555<-5437 ze=66.495<-7567 Statuses=0009 0008 12:15:45 Msec=750 True Az=81.555 Ze=66.495 Az status=0009 Ze status=0008 12:15:45 Check angles 12:15:45 SkyScan query 12:15:46 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 12:15:46 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-14 12:15:46] 12:15:46 Check angles 12:15:46 SkyScan query 12:15:47 SkyScan query done: ret=0 az=118.2<-7880 ze=66.495<-7567 Statuses=0009 0008 12:15:47 Msec=2250 True Az=118.2 Ze=66.495 Az status=0009 Ze status=0008 12:15:47 Check angles 12:15:47 SkyScan query 12:15:47 SkyScan query done: ret=0 az=134.355<-8957 ze=66.495<-7567 Statuses=0009 0008 12:15:47 Msec=3000 True Az=134.355 Ze=66.495 Az status=0009 Ze status=0008 12:15:47 Check angles 12:15:47 SkyScan query 12:15:48 SkyScan query done: ret=0 az=152.115<-10141 ze=66.495<-7567 Statuses=0009 0008 12:15:48 Msec=3750 True Az=152.115 Ze=66.495 Az status=0009 Ze status=0008 12:15:48 Check angles 12:15:48 SkyScan query 12:15:49 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:15:49 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:15:49 Message to Master queued w/err=0: serial=142236 error=0 [UTC 2018-12-14 12:15:52] 12:15:54 Received message from Master: op=Filter serial=142237 12:15:54 Color wheel filter change from 0 to 0 12:15:54 FLIGetFilterPos err=0 currentPosition=0 12:15:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:54 Filter is already there-color wheel unchanged 12:15:54 Received message from Master: op=Shutter serial=142238 12:15:54 Shutter LASER close 12:15:54 Received message from Camera: op=State serial=142240 12:15:54 GetSingleValue result=40 Value=cccccccc 12:15:54 SkyScan query 12:15:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:15:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:55 Parameters OK 12:15:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:55 Set A/D data flow result=40 12:15:55 Set A/D channel type result=40 12:15:55 Set A/D encoding result=40 12:15:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:55 Set channel filter=0.000000e+000 result=40 12:15:55 Config A/D Result=40 12:15:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:55 Get A/D filter: -9.255963e+061 result=40 12:15:55 Get A/D value=-858993460 result=40 12:15:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:55 Parameters OK 12:15:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:55 Set A/D data flow result=40 12:15:55 Set A/D channel type result=40 12:15:55 Set A/D encoding result=40 12:15:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:55 Set channel filter=0.000000e+000 result=40 12:15:55 Config A/D Result=40 12:15:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:55 Get A/D filter: -9.255963e+061 result=40 12:15:55 Get A/D value=-858993460 result=40 12:15:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:55 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:55 Aux= 12:15:55 Message to Camera, serial 142240 queued 12:16:31 Received message from Master: op=PointingHead serial=142253 12:16:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:16:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:16:32 Point started: ret=0 12:16:32 point_skyscan result=0 12:16:32 Check angles 12:16:32 SkyScan query 12:16:33 SkyScan query done: ret=0 az=135.18<-9012 ze=36.99<-9534 Statuses=0009 0009 12:16:33 Msec=0 True Az=135.18 Ze=36.99 Az status=0009 Ze status=0009 12:16:33 Check angles 12:16:33 SkyScan query 12:16:34 SkyScan query done: ret=0 az=117.72<-7848 ze=16.035<-10931 Statuses=0009 0009 12:16:34 Msec=750 True Az=117.72 Ze=16.035 Az status=0009 Ze status=0009 12:16:34 Check angles 12:16:34 SkyScan query 12:16:35 SkyScan query done: ret=0 az=100.35<-6690 ze=-4.89<-12326 Statuses=0009 0009 12:16:35 Msec=1500 True Az=100.35 Ze=-4.89 Az status=0009 Ze status=0009 12:16:35 Check angles 12:16:35 SkyScan query 12:16:35 SkyScan query done: ret=0 az=82.86<-5524 ze=-25.86<-13724 Statuses=0009 0009 12:16:35 Msec=2250 True Az=82.86 Ze=-25.86 Az status=0009 Ze status=0009 12:16:35 Check angles 12:16:35 SkyScan query 12:16:36 SkyScan query done: ret=0 az=65.355<-4357 ze=-38.58<-14572 Statuses=0009 0008 12:16:36 Msec=3000 True Az=65.355 Ze=-38.58 Az status=0009 Ze status=0008 12:16:36 Check angles 12:16:36 SkyScan query 12:16:37 SkyScan query done: ret=0 az=47.85<-3190 ze=-38.52<-14568 Statuses=0009 0008 12:16:37 Msec=3750 True Az=47.85 Ze=-38.52 Az status=0009 Ze status=0008 12:16:37 Check angles 12:16:37 SkyScan query 12:16:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:16:38 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:16:38 Message to Master queued w/err=0: serial=142253 error=0 12:16:43 Received message from Master: op=Filter serial=142254 12:16:43 Color wheel filter change from 0 to 0 12:16:43 FLIGetFilterPos err=0 currentPosition=0 12:16:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:43 Filter is already there-color wheel unchanged 12:16:43 Received message from Master: op=Shutter serial=142255 12:16:43 Shutter LASER close 12:16:43 Received message from Camera: op=State serial=142257 12:16:43 GetSingleValue result=40 Value=cccccccc 12:16:43 SkyScan query 12:16:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:16:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:43 Parameters OK 12:16:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:43 Set A/D data flow result=40 12:16:43 Set A/D channel type result=40 12:16:43 Set A/D encoding result=40 12:16:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:43 Set channel filter=0.000000e+000 result=40 12:16:43 Config A/D Result=40 12:16:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:43 Get A/D filter: -9.255963e+061 result=40 12:16:43 Get A/D value=-858993460 result=40 12:16:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:43 Parameters OK 12:16:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:43 Set A/D data flow result=40 12:16:43 Set A/D channel type result=40 12:16:43 Set A/D encoding result=40 12:16:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:43 Set channel filter=0.000000e+000 result=40 12:16:43 Config A/D Result=40 12:16:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:43 Get A/D filter: -9.255963e+061 result=40 12:16:43 Get A/D value=-858993460 result=40 12:16:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:43 Aux= 12:16:43 Message to Camera, serial 142257 queued 12:17:19 Received message from Master: op=PointingHead serial=142269 12:17:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:17:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:17:20 Point started: ret=0 12:17:20 point_skyscan result=0 12:17:20 Check angles 12:17:20 SkyScan query 12:17:21 SkyScan query done: ret=0 az=64.125<-4275 ze=-68.31<-16554 Statuses=0009 0009 12:17:21 Msec=0 True Az=64.125 Ze=-68.31 Az status=0009 Ze status=0009 12:17:21 Check angles 12:17:21 SkyScan query 12:17:22 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.265<-17951 Statuses=0009 0009 12:17:22 Msec=750 True Az=81.57 Ze=-89.265 Az status=0009 Ze status=0009 12:17:22 Check angles 12:17:22 SkyScan query 12:17:22 SkyScan query done: ret=0 az=99<-6600 ze=-110.205<-19347 Statuses=0009 0009 12:17:22 Msec=1500 True Az=99 Ze=-110.205 Az status=0009 Ze status=0009 12:17:23 Check angles 12:17:23 SkyScan query 12:17:23 SkyScan query done: ret=0 az=116.475<-7765 ze=-131.145<-20743 Statuses=0009 0009 12:17:23 Msec=2250 True Az=116.475 Ze=-131.145 Az status=0009 Ze status=0009 12:17:23 Check angles 12:17:23 SkyScan query 12:17:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 12:17:24 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 12:17:24 Check angles 12:17:24 SkyScan query 12:17:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 12:17:25 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 12:17:25 Message to Master queued w/err=0: serial=142269 error=0 12:17:30 Received message from Master: op=Filter serial=142270 12:17:30 Color wheel filter change from 0 to 0 12:17:30 FLIGetFilterPos err=0 currentPosition=0 12:17:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:30 Filter is already there-color wheel unchanged 12:17:30 Received message from Master: op=Shutter serial=142271 12:17:30 Shutter LASER close 12:17:30 Received message from Camera: op=State serial=142273 12:17:30 GetSingleValue result=40 Value=cccccccc 12:17:30 SkyScan query 12:17:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:17:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:30 Parameters OK 12:17:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:30 Set A/D data flow result=40 12:17:30 Set A/D channel type result=40 12:17:30 Set A/D encoding result=40 12:17:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:30 Set channel filter=0.000000e+000 result=40 12:17:30 Config A/D Result=40 12:17:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:30 Get A/D filter: -9.255963e+061 result=40 12:17:30 Get A/D value=-858993460 result=40 12:17:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:30 Parameters OK 12:17:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:30 Set A/D data flow result=40 12:17:30 Set A/D channel type result=40 12:17:30 Set A/D encoding result=40 12:17:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:30 Set channel filter=0.000000e+000 result=40 12:17:30 Config A/D Result=40 12:17:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:30 Get A/D filter: -9.255963e+061 result=40 12:17:30 Get A/D value=-858993460 result=40 12:17:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:30 Aux= 12:17:30 Message to Camera, serial 142273 queued 12:18:07 Received message from Master: op=PointingHead serial=142286 12:18:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:18:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:18:08 Point started: ret=0 12:18:08 point_skyscan result=0 12:18:08 Check angles 12:18:08 SkyScan query 12:18:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0009 0009 12:18:09 Msec=0 True Az=112.995 Ze=-171.045 Az status=0009 Ze status=0009 12:18:09 Check angles 12:18:09 SkyScan query 12:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:18:10 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:18:10 Message to Master queued w/err=0: serial=142286 error=0 12:18:15 Received message from Master: op=Filter serial=142287 12:18:15 Color wheel filter change from 0 to 0 12:18:15 FLIGetFilterPos err=0 currentPosition=0 12:18:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:15 Filter is already there-color wheel unchanged 12:18:15 Received message from Master: op=Shutter serial=142288 12:18:15 Shutter LASER open 12:18:15 Received message from Camera: op=State serial=142290 12:18:15 GetSingleValue result=40 Value=cccccccc 12:18:15 SkyScan query 12:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:18:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:16 Parameters OK 12:18:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:16 Set A/D data flow result=40 12:18:16 Set A/D channel type result=40 12:18:16 Set A/D encoding result=40 12:18:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:16 Set channel filter=0.000000e+000 result=40 12:18:16 Config A/D Result=40 12:18:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:16 Get A/D filter: -9.255963e+061 result=40 12:18:16 Get A/D value=-858993460 result=40 12:18:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:16 Parameters OK 12:18:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:16 Set A/D data flow result=40 12:18:16 Set A/D channel type result=40 12:18:16 Set A/D encoding result=40 12:18:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:16 Set channel filter=0.000000e+000 result=40 12:18:16 Config A/D Result=40 12:18:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:16 Get A/D filter: -9.255963e+061 result=40 12:18:16 Get A/D value=-858993460 result=40 12:18:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:16 Aux= 12:18:16 Message to Camera, serial 142290 queued 12:18:24 Received message from Master: op=Shutter serial=142300 12:18:24 Shutter LASER close 12:18:25 Received message from Master: op=PointingHead serial=142304 12:18:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:18:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:18:25 Point started: ret=0 12:18:25 point_skyscan result=0 12:18:26 Check angles 12:18:26 SkyScan query 12:18:26 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.52<-21568 Statuses=0009 0009 12:18:26 Msec=0 True Az=135.765 Ze=-143.52 Az status=0009 Ze status=0009 12:18:26 Check angles 12:18:26 SkyScan query 12:18:27 SkyScan query done: ret=0 az=153.345<-10223 ze=-122.505<-20167 Statuses=0009 0009 12:18:27 Msec=750 True Az=153.345 Ze=-122.505 Az status=0009 Ze status=0009 12:18:27 Check angles 12:18:27 SkyScan query 12:18:28 SkyScan query done: ret=0 az=171.12<-11408 ze=-101.13<-18742 Statuses=0009 0009 12:18:28 Msec=1500 True Az=171.12 Ze=-101.13 Az status=0009 Ze status=0009 12:18:28 Check angles 12:18:28 SkyScan query 12:18:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.74<-17316 Statuses=0008 0009 12:18:29 Msec=2250 True Az=176.01 Ze=-79.74 Az status=0008 Ze status=0009 12:18:29 Check angles 12:18:29 SkyScan query 12:18:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.29<-15886 Statuses=0008 0009 12:18:29 Msec=3000 True Az=176.01 Ze=-58.29 Az status=0008 Ze status=0009 12:18:30 Check angles 12:18:30 SkyScan query 12:18:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 12:18:30 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 12:18:30 Message to Master queued w/err=0: serial=142304 error=0 12:18:35 Received message from Master: op=Filter serial=142305 12:18:35 Color wheel filter change from 0 to 0 12:18:35 FLIGetFilterPos err=0 currentPosition=0 12:18:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:35 Filter is already there-color wheel unchanged 12:18:35 Received message from Master: op=Shutter serial=142306 12:18:35 Shutter LASER close 12:18:35 Received message from Camera: op=State serial=142308 12:18:35 GetSingleValue result=40 Value=cccccccc 12:18:35 SkyScan query 12:18:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:18:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:36 Parameters OK 12:18:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:36 Set A/D data flow result=40 12:18:36 Set A/D channel type result=40 12:18:36 Set A/D encoding result=40 12:18:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:36 Set channel filter=0.000000e+000 result=40 12:18:36 Config A/D Result=40 12:18:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:36 Get A/D filter: -9.255963e+061 result=40 12:18:36 Get A/D value=-858993460 result=40 12:18:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:36 Parameters OK 12:18:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:36 Set A/D data flow result=40 12:18:36 Set A/D channel type result=40 12:18:36 Set A/D encoding result=40 12:18:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:36 Set channel filter=0.000000e+000 result=40 12:18:36 Config A/D Result=40 12:18:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:36 Get A/D filter: -9.255963e+061 result=40 12:18:36 Get A/D value=-858993460 result=40 12:18:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:36 Aux= 12:18:36 Message to Camera, serial 142308 queued 12:19:13 Received message from Master: op=PointingHead serial=142321 12:19:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:19:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:19:13 Point started: ret=0 12:19:13 point_skyscan result=0 12:19:14 Check angles 12:19:14 SkyScan query 12:19:15 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.96<-13464 Statuses=0009 0009 12:19:15 Msec=0 True Az=153.165 Ze=-21.96 Az status=0009 Ze status=0009 12:19:15 Check angles 12:19:15 SkyScan query 12:19:15 SkyScan query done: ret=0 az=135.72<-9048 ze=-0.96<-12064 Statuses=0009 0009 12:19:15 Msec=750 True Az=135.72 Ze=-0.96 Az status=0009 Ze status=0009 12:19:15 Check angles 12:19:15 SkyScan query 12:19:16 SkyScan query done: ret=0 az=118.215<-7881 ze=19.95<-10670 Statuses=0009 0009 12:19:16 Msec=1500 True Az=118.215 Ze=19.95 Az status=0009 Ze status=0009 12:19:16 Check angles 12:19:16 SkyScan query 12:19:17 SkyScan query done: ret=0 az=100.44<-6696 ze=41.4<-9240 Statuses=0009 0009 12:19:17 Msec=2250 True Az=100.44 Ze=41.4 Az status=0009 Ze status=0009 12:19:17 Check angles 12:19:17 SkyScan query 12:19:18 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 12:19:18 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 12:19:18 Check angles 12:19:18 SkyScan query 12:19:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:19:18 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:19:18 Message to Master queued w/err=0: serial=142321 error=0 12:19:23 Received message from Master: op=Filter serial=142322 12:19:23 Color wheel filter change from 0 to 0 12:19:23 FLIGetFilterPos err=0 currentPosition=0 12:19:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:23 Filter is already there-color wheel unchanged 12:19:23 Received message from Master: op=Shutter serial=142323 12:19:23 Shutter LASER close 12:19:24 Received message from Camera: op=State serial=142325 12:19:24 GetSingleValue result=40 Value=cccccccc 12:19:24 SkyScan query 12:19:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:19:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:24 Parameters OK 12:19:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:24 Set A/D data flow result=40 12:19:24 Set A/D channel type result=40 12:19:24 Set A/D encoding result=40 12:19:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:24 Set channel filter=0.000000e+000 result=40 12:19:24 Config A/D Result=40 12:19:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:24 Get A/D filter: -9.255963e+061 result=40 12:19:24 Get A/D value=-858993460 result=40 12:19:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:24 Parameters OK 12:19:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:24 Set A/D data flow result=40 12:19:24 Set A/D channel type result=40 12:19:24 Set A/D encoding result=40 12:19:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:24 Set channel filter=0.000000e+000 result=40 12:19:24 Config A/D Result=40 12:19:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:24 Get A/D filter: -9.255963e+061 result=40 12:19:24 Get A/D value=-858993460 result=40 12:19:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:24 Aux= 12:19:24 Message to Camera, serial 142325 queued 12:20:01 Received message from Master: op=PointingHead serial=142338 12:20:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:20:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:20:01 Point started: ret=0 12:20:01 point_skyscan result=0 12:20:02 Check angles 12:20:02 SkyScan query 12:20:03 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 12:20:03 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 12:20:03 Check angles 12:20:03 SkyScan query 12:20:03 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 12:20:03 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 12:20:04 Check angles 12:20:04 SkyScan query 12:20:04 SkyScan query done: ret=0 az=143.88<-9592 ze=38.505<-9433 Statuses=0009 0008 12:20:04 Msec=1500 True Az=143.88 Ze=38.505 Az status=0009 Ze status=0008 12:20:04 Check angles 12:20:04 SkyScan query 12:20:05 SkyScan query done: ret=0 az=161.28<-10752 ze=38.505<-9433 Statuses=0009 0008 12:20:05 Msec=2250 True Az=161.28 Ze=38.505 Az status=0009 Ze status=0008 12:20:05 Check angles 12:20:05 SkyScan query 12:20:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:20:06 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:20:06 Check angles 12:20:06 SkyScan query 12:20:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:20:06 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:20:06 Message to Master queued w/err=0: serial=142338 error=0 12:20:11 Received message from Master: op=Filter serial=142339 12:20:11 Color wheel filter change from 0 to 0 12:20:11 FLIGetFilterPos err=0 currentPosition=0 12:20:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:11 Filter is already there-color wheel unchanged 12:20:12 Received message from Master: op=Shutter serial=142340 12:20:12 Shutter LASER close 12:20:12 Received message from Camera: op=State serial=142342 12:20:12 GetSingleValue result=40 Value=cccccccc 12:20:12 SkyScan query 12:20:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:20:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:12 Parameters OK 12:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:12 Set A/D data flow result=40 12:20:12 Set A/D channel type result=40 12:20:12 Set A/D encoding result=40 12:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:12 Set channel filter=0.000000e+000 result=40 12:20:12 Config A/D Result=40 12:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:12 Get A/D filter: -9.255963e+061 result=40 12:20:12 Get A/D value=-858993460 result=40 12:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:12 Parameters OK 12:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:12 Set A/D data flow result=40 12:20:12 Set A/D channel type result=40 12:20:12 Set A/D encoding result=40 12:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:12 Set channel filter=0.000000e+000 result=40 12:20:12 Config A/D Result=40 12:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:12 Get A/D filter: -9.255963e+061 result=40 12:20:12 Get A/D value=-858993460 result=40 12:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:12 Aux= 12:20:12 Message to Camera, serial 142342 queued 12:20:49 Received message from Master: op=PointingHead serial=142355 12:20:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:20:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:20:49 Point started: ret=0 12:20:49 point_skyscan result=0 12:20:50 Check angles 12:20:50 SkyScan query 12:20:51 SkyScan query done: ret=0 az=152.73<-10182 ze=8.25<-11450 Statuses=0009 0009 12:20:51 Msec=0 True Az=152.73 Ze=8.25 Az status=0009 Ze status=0009 12:20:51 Check angles 12:20:51 SkyScan query 12:20:51 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.525<-12835 Statuses=0009 0009 12:20:51 Msec=750 True Az=135.3 Ze=-12.525 Az status=0009 Ze status=0009 12:20:52 Check angles 12:20:52 SkyScan query 12:20:52 SkyScan query done: ret=0 az=117.51<-7834 ze=-33.96<-14264 Statuses=0009 0009 12:20:52 Msec=1500 True Az=117.51 Ze=-33.96 Az status=0009 Ze status=0009 12:20:52 Check angles 12:20:52 SkyScan query 12:20:53 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.585<-15439 Statuses=0009 0009 12:20:53 Msec=2250 True Az=100.05 Ze=-51.585 Az status=0009 Ze status=0009 12:20:53 Check angles 12:20:53 SkyScan query 12:20:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 12:20:54 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 12:20:54 Check angles 12:20:54 SkyScan query 12:20:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:20:54 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:20:54 Message to Master queued w/err=0: serial=142355 error=0 12:20:59 Received message from Master: op=Filter serial=142356 12:20:59 Color wheel filter change from 0 to 0 12:20:59 FLIGetFilterPos err=0 currentPosition=0 12:20:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:59 Filter is already there-color wheel unchanged 12:21:00 Received message from Master: op=Shutter serial=142357 12:21:00 Shutter LASER close 12:21:00 Received message from Camera: op=State serial=142359 12:21:00 GetSingleValue result=40 Value=cccccccc 12:21:00 SkyScan query 12:21:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:21:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:00 Parameters OK 12:21:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:00 Set A/D data flow result=40 12:21:00 Set A/D channel type result=40 12:21:00 Set A/D encoding result=40 12:21:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:00 Set channel filter=0.000000e+000 result=40 12:21:00 Config A/D Result=40 12:21:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:00 Get A/D filter: -9.255963e+061 result=40 12:21:00 Get A/D value=-858993460 result=40 12:21:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:00 Parameters OK 12:21:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:00 Set A/D data flow result=40 12:21:00 Set A/D channel type result=40 12:21:00 Set A/D encoding result=40 12:21:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:00 Set channel filter=0.000000e+000 result=40 12:21:00 Config A/D Result=40 12:21:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:00 Get A/D filter: -9.255963e+061 result=40 12:21:00 Get A/D value=-858993460 result=40 12:21:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:00 Aux= 12:21:00 Message to Camera, serial 142359 queued 12:21:37 Received message from Master: op=PointingHead serial=142372 12:21:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:21:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:21:37 Point started: ret=0 12:21:37 point_skyscan result=0 12:21:38 Check angles 12:21:38 SkyScan query 12:21:39 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.555<-17437 Statuses=0009 0009 12:21:39 Msec=0 True Az=109.17 Ze=-81.555 Az status=0009 Ze status=0009 12:21:39 Check angles 12:21:39 SkyScan query 12:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.915<-18861 Statuses=0008 0009 12:21:40 Msec=750 True Az=112.995 Ze=-102.915 Az status=0008 Ze status=0009 12:21:40 Check angles 12:21:40 SkyScan query 12:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 12:21:40 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 12:21:41 Check angles 12:21:41 SkyScan query 12:21:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.795<-21653 Statuses=0008 0009 12:21:41 Msec=2250 True Az=112.995 Ze=-144.795 Az status=0008 Ze status=0009 12:21:41 Check angles 12:21:41 SkyScan query 12:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.2<-23080 Statuses=0008 0009 12:21:42 Msec=3000 True Az=112.995 Ze=-166.2 Az status=0008 Ze status=0009 12:21:42 Check angles 12:21:42 SkyScan query 12:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:21:43 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:21:43 Message to Master queued w/err=0: serial=142372 error=0 12:21:48 Received message from Master: op=Filter serial=142373 12:21:48 Color wheel filter change from 0 to 0 12:21:48 FLIGetFilterPos err=0 currentPosition=0 12:21:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:48 Filter is already there-color wheel unchanged 12:21:48 Received message from Master: op=Shutter serial=142374 12:21:48 Shutter LASER open 12:21:48 Received message from Camera: op=State serial=142376 12:21:48 GetSingleValue result=40 Value=cccccccc 12:21:48 SkyScan query 12:21:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:21:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:49 Parameters OK 12:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:49 Set A/D data flow result=40 12:21:49 Set A/D channel type result=40 12:21:49 Set A/D encoding result=40 12:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:49 Set channel filter=0.000000e+000 result=40 12:21:49 Config A/D Result=40 12:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:49 Get A/D filter: -9.255963e+061 result=40 12:21:49 Get A/D value=-858993460 result=40 12:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:49 Parameters OK 12:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:49 Set A/D data flow result=40 12:21:49 Set A/D channel type result=40 12:21:49 Set A/D encoding result=40 12:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:49 Set channel filter=0.000000e+000 result=40 12:21:49 Config A/D Result=40 12:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:49 Get A/D filter: -9.255963e+061 result=40 12:21:49 Get A/D value=-858993460 result=40 12:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:49 Aux= 12:21:49 Message to Camera, serial 142376 queued 12:21:57 Received message from Master: op=Shutter serial=142386 12:21:57 Shutter LASER close 12:21:57 Received message from Master: op=PointingHead serial=142390 12:21:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:21:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:21:58 Point started: ret=0 12:21:58 point_skyscan result=0 12:21:58 Check angles 12:21:58 SkyScan query 12:21:59 SkyScan query done: ret=0 az=90.15<-6010 ze=157.56<-1496 Statuses=0009 0009 12:21:59 Msec=0 True Az=90.15 Ze=157.56 Az status=0009 Ze status=0009 12:21:59 Check angles 12:21:59 SkyScan query 12:22:00 SkyScan query done: ret=0 az=72.72<-4848 ze=136.56<-2896 Statuses=0009 0009 12:22:00 Msec=750 True Az=72.72 Ze=136.56 Az status=0009 Ze status=0009 12:22:00 Check angles 12:22:00 SkyScan query 12:22:01 SkyScan query done: ret=0 az=55.23<-3682 ze=115.65<-4290 Statuses=0009 0009 12:22:01 Msec=1500 True Az=55.23 Ze=115.65 Az status=0009 Ze status=0009 12:22:01 Check angles 12:22:01 SkyScan query 12:22:01 SkyScan query done: ret=0 az=40.965<-2731 ze=94.215<-5719 Statuses=0009 0009 12:22:01 Msec=2250 True Az=40.965 Ze=94.215 Az status=0009 Ze status=0009 12:22:01 Check angles 12:22:01 SkyScan query 12:22:02 SkyScan query done: ret=0 az=40.995<-2733 ze=73.245<-7117 Statuses=0008 0009 12:22:02 Msec=3000 True Az=40.995 Ze=73.245 Az status=0008 Ze status=0009 12:22:02 Check angles 12:22:02 SkyScan query 12:22:03 SkyScan query done: ret=0 az=40.995<-2733 ze=52.74<-8484 Statuses=0008 0009 12:22:03 Msec=3750 True Az=40.995 Ze=52.74 Az status=0008 Ze status=0009 12:22:03 Check angles 12:22:03 SkyScan query 12:22:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:22:04 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:22:04 Message to Master queued w/err=0: serial=142390 error=0 12:22:09 Received message from Master: op=Filter serial=142391 12:22:09 Color wheel filter change from 0 to 0 12:22:09 FLIGetFilterPos err=0 currentPosition=0 12:22:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:09 Filter is already there-color wheel unchanged 12:22:09 Received message from Master: op=Shutter serial=142392 12:22:09 Shutter LASER close 12:22:09 Received message from Camera: op=State serial=142394 12:22:09 GetSingleValue result=40 Value=cccccccc 12:22:09 SkyScan query 12:22:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:22:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:10 Parameters OK 12:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:10 Set A/D data flow result=40 12:22:10 Set A/D channel type result=40 12:22:10 Set A/D encoding result=40 12:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:10 Set channel filter=0.000000e+000 result=40 12:22:10 Config A/D Result=40 12:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:10 Get A/D filter: -9.255963e+061 result=40 12:22:10 Get A/D value=-858993460 result=40 12:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:10 Parameters OK 12:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:10 Set A/D data flow result=40 12:22:10 Set A/D channel type result=40 12:22:10 Set A/D encoding result=40 12:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:10 Set channel filter=0.000000e+000 result=40 12:22:10 Config A/D Result=40 12:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:10 Get A/D filter: -9.255963e+061 result=40 12:22:10 Get A/D value=-858993460 result=40 12:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:10 Aux= 12:22:10 Message to Camera, serial 142394 queued 12:22:46 Received message from Master: op=PointingHead serial=142407 12:22:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:22:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:22:47 Point started: ret=0 12:22:47 point_skyscan result=0 12:22:47 Check angles 12:22:47 SkyScan query 12:22:48 SkyScan query done: ret=0 az=64.335<-4289 ze=66.555<-7563 Statuses=0009 0008 12:22:48 Msec=0 True Az=64.335 Ze=66.555 Az status=0009 Ze status=0008 12:22:48 Check angles 12:22:48 SkyScan query 12:22:49 SkyScan query done: ret=0 az=81.9<-5460 ze=66.495<-7567 Statuses=0009 0008 12:22:49 Msec=750 True Az=81.9 Ze=66.495 Az status=0009 Ze status=0008 12:22:49 Check angles 12:22:49 SkyScan query 12:22:50 SkyScan query done: ret=0 az=99.42<-6628 ze=66.495<-7567 Statuses=0009 0008 12:22:50 Msec=1500 True Az=99.42 Ze=66.495 Az status=0009 Ze status=0008 12:22:50 Check angles 12:22:50 SkyScan query 12:22:50 SkyScan query done: ret=0 az=116.805<-7787 ze=66.495<-7567 Statuses=0009 0008 12:22:50 Msec=2250 True Az=116.805 Ze=66.495 Az status=0009 Ze status=0008 12:22:50 Check angles 12:22:50 SkyScan query 12:22:51 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 12:22:51 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 12:22:51 Check angles 12:22:51 SkyScan query 12:22:52 SkyScan query done: ret=0 az=151.71<-10114 ze=66.495<-7567 Statuses=0009 0008 12:22:52 Msec=3750 True Az=151.71 Ze=66.495 Az status=0009 Ze status=0008 12:22:52 Check angles 12:22:52 SkyScan query 12:22:53 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:22:53 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:22:53 Message to Master queued w/err=0: serial=142407 error=0 12:22:58 Received message from Master: op=Filter serial=142408 12:22:58 Color wheel filter change from 0 to 0 12:22:58 FLIGetFilterPos err=0 currentPosition=0 12:22:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:58 Filter is already there-color wheel unchanged 12:22:58 Received message from Master: op=Shutter serial=142409 12:22:58 Shutter LASER close 12:22:58 Received message from Camera: op=State serial=142411 12:22:58 GetSingleValue result=40 Value=cccccccc 12:22:58 SkyScan query 12:22:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:22:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:58 Parameters OK 12:22:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:58 Set A/D data flow result=40 12:22:58 Set A/D channel type result=40 12:22:58 Set A/D encoding result=40 12:22:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:58 Set channel filter=0.000000e+000 result=40 12:22:58 Config A/D Result=40 12:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:58 Get A/D filter: -9.255963e+061 result=40 12:22:58 Get A/D value=-858993460 result=40 12:22:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:58 Parameters OK 12:22:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:58 Set A/D data flow result=40 12:22:58 Set A/D channel type result=40 12:22:58 Set A/D encoding result=40 12:22:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:58 Set channel filter=0.000000e+000 result=40 12:22:58 Config A/D Result=40 12:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:58 Get A/D filter: -9.255963e+061 result=40 12:22:58 Get A/D value=-858993460 result=40 12:22:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:58 Aux= 12:22:58 Message to Camera, serial 142411 queued 12:23:35 Received message from Master: op=PointingHead serial=142424 12:23:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:23:35 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:23:35 Point started: ret=0 12:23:35 point_skyscan result=0 12:23:36 Check angles 12:23:36 SkyScan query 12:23:37 SkyScan query done: ret=0 az=134.805<-8987 ze=36.645<-9557 Statuses=0009 0009 12:23:37 Msec=0 True Az=134.805 Ze=36.645 Az status=0009 Ze status=0009 12:23:37 Check angles 12:23:37 SkyScan query 12:23:38 SkyScan query done: ret=0 az=117.075<-7805 ze=15.27<-10982 Statuses=0009 0009 12:23:38 Msec=750 True Az=117.075 Ze=15.27 Az status=0009 Ze status=0009 12:23:38 Check angles 12:23:38 SkyScan query 12:23:38 SkyScan query done: ret=0 az=99.765<-6651 ze=-5.745<-12383 Statuses=0009 0009 12:23:38 Msec=1500 True Az=99.765 Ze=-5.745 Az status=0009 Ze status=0009 12:23:38 Check angles 12:23:38 SkyScan query 12:23:39 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.7<-13780 Statuses=0009 0009 12:23:39 Msec=2250 True Az=82.2 Ze=-26.7 Az status=0009 Ze status=0009 12:23:39 Check angles 12:23:39 SkyScan query 12:23:40 SkyScan query done: ret=0 az=64.335<-4289 ze=-38.58<-14572 Statuses=0009 0008 12:23:40 Msec=3000 True Az=64.335 Ze=-38.58 Az status=0009 Ze status=0008 12:23:40 Check angles 12:23:40 SkyScan query 12:23:41 SkyScan query done: ret=0 az=46.545<-3103 ze=-38.52<-14568 Statuses=0009 0008 12:23:41 Msec=3750 True Az=46.545 Ze=-38.52 Az status=0009 Ze status=0008 12:23:41 Check angles 12:23:41 SkyScan query 12:23:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:23:41 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:23:41 Message to Master queued w/err=0: serial=142424 error=0 12:23:46 Received message from Master: op=Filter serial=142425 12:23:46 Color wheel filter change from 0 to 0 12:23:46 FLIGetFilterPos err=0 currentPosition=0 12:23:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:46 Filter is already there-color wheel unchanged 12:23:47 Received message from Master: op=Shutter serial=142426 12:23:47 Shutter LASER close 12:23:47 Received message from Camera: op=State serial=142428 12:23:47 GetSingleValue result=40 Value=cccccccc 12:23:47 SkyScan query 12:23:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:23:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:47 Parameters OK 12:23:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:47 Set A/D data flow result=40 12:23:47 Set A/D channel type result=40 12:23:47 Set A/D encoding result=40 12:23:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:47 Set channel filter=0.000000e+000 result=40 12:23:47 Config A/D Result=40 12:23:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:47 Get A/D filter: -9.255963e+061 result=40 12:23:47 Get A/D value=-858993460 result=40 12:23:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:47 Parameters OK 12:23:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:47 Set A/D data flow result=40 12:23:47 Set A/D channel type result=40 12:23:47 Set A/D encoding result=40 12:23:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:47 Set channel filter=0.000000e+000 result=40 12:23:47 Config A/D Result=40 12:23:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:47 Get A/D filter: -9.255963e+061 result=40 12:23:47 Get A/D value=-858993460 result=40 12:23:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:47 Aux= 12:23:47 Message to Camera, serial 142428 queued 12:24:24 Received message from Master: op=PointingHead serial=142441 12:24:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:24:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:24:24 Point started: ret=0 12:24:24 point_skyscan result=0 12:24:25 Check angles 12:24:25 SkyScan query 12:24:26 SkyScan query done: ret=0 az=63.735<-4249 ze=-68.055<-16537 Statuses=0009 0009 12:24:26 Msec=0 True Az=63.735 Ze=-68.055 Az status=0009 Ze status=0009 12:24:26 Check angles 12:24:26 SkyScan query 12:24:26 SkyScan query done: ret=0 az=81.225<-5415 ze=-89.01<-17934 Statuses=0009 0009 12:24:26 Msec=750 True Az=81.225 Ze=-89.01 Az status=0009 Ze status=0009 12:24:27 Check angles 12:24:27 SkyScan query 12:24:27 SkyScan query done: ret=0 az=98.76<-6584 ze=-109.905<-19327 Statuses=0009 0009 12:24:27 Msec=1500 True Az=98.76 Ze=-109.905 Az status=0009 Ze status=0009 12:24:27 Check angles 12:24:27 SkyScan query 12:24:28 SkyScan query done: ret=0 az=116.205<-7747 ze=-130.935<-20729 Statuses=0009 0009 12:24:28 Msec=2250 True Az=116.205 Ze=-130.935 Az status=0009 Ze status=0009 12:24:28 Check angles 12:24:28 SkyScan query 12:24:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 12:24:29 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 12:24:29 Check angles 12:24:29 SkyScan query 12:24:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:24:29 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:24:29 Message to Master queued w/err=0: serial=142441 error=0 12:24:34 Received message from Master: op=Filter serial=142442 12:24:34 Color wheel filter change from 0 to 0 12:24:34 FLIGetFilterPos err=0 currentPosition=0 12:24:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:34 Filter is already there-color wheel unchanged 12:24:35 Received message from Master: op=Shutter serial=142443 12:24:35 Shutter LASER close 12:24:35 Received message from Camera: op=State serial=142445 12:24:35 GetSingleValue result=40 Value=cccccccc 12:24:35 SkyScan query 12:24:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:24:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:35 Parameters OK 12:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:35 Set A/D data flow result=40 12:24:35 Set A/D channel type result=40 12:24:35 Set A/D encoding result=40 12:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:35 Set channel filter=0.000000e+000 result=40 12:24:35 Config A/D Result=40 12:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:35 Get A/D filter: -9.255963e+061 result=40 12:24:35 Get A/D value=-858993460 result=40 12:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:35 Parameters OK 12:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:35 Set A/D data flow result=40 12:24:35 Set A/D channel type result=40 12:24:35 Set A/D encoding result=40 12:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:35 Set channel filter=0.000000e+000 result=40 12:24:35 Config A/D Result=40 12:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:35 Get A/D filter: -9.255963e+061 result=40 12:24:35 Get A/D value=-858993460 result=40 12:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:35 Aux= 12:24:35 Message to Camera, serial 142445 queued 12:25:12 Received message from Master: op=PointingHead serial=142458 12:25:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:25:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:25:12 Point started: ret=0 12:25:12 point_skyscan result=0 12:25:13 Check angles 12:25:13 SkyScan query 12:25:14 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.88<-23392 Statuses=0009 0009 12:25:14 Msec=0 True Az=113.01 Ze=-170.88 Az status=0009 Ze status=0009 12:25:14 Check angles 12:25:14 SkyScan query 12:25:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:25:15 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:25:15 Message to Master queued w/err=0: serial=142458 error=0 12:25:20 Received message from Master: op=Filter serial=142459 12:25:20 Color wheel filter change from 0 to 0 12:25:20 FLIGetFilterPos err=0 currentPosition=0 12:25:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:20 Filter is already there-color wheel unchanged 12:25:20 Received message from Master: op=Shutter serial=142460 12:25:20 Shutter LASER open 12:25:20 Received message from Camera: op=State serial=142462 12:25:20 GetSingleValue result=40 Value=cccccccc 12:25:20 SkyScan query 12:25:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:25:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:20 Parameters OK 12:25:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:20 Set A/D data flow result=40 12:25:20 Set A/D channel type result=40 12:25:20 Set A/D encoding result=40 12:25:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:20 Set channel filter=0.000000e+000 result=40 12:25:20 Config A/D Result=40 12:25:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:20 Get A/D filter: -9.255963e+061 result=40 12:25:20 Get A/D value=-858993460 result=40 12:25:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:20 Parameters OK 12:25:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:20 Set A/D data flow result=40 12:25:20 Set A/D channel type result=40 12:25:20 Set A/D encoding result=40 12:25:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:20 Set channel filter=0.000000e+000 result=40 12:25:20 Config A/D Result=40 12:25:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:20 Get A/D filter: -9.255963e+061 result=40 12:25:20 Get A/D value=-858993460 result=40 12:25:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:20 Aux= 12:25:20 Message to Camera, serial 142462 queued 12:25:29 Received message from Master: op=Shutter serial=142472 12:25:29 Shutter LASER close 12:25:29 Received message from Master: op=PointingHead serial=142476 12:25:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:25:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:25:30 Point started: ret=0 12:25:30 point_skyscan result=0 12:25:31 Check angles 12:25:31 SkyScan query 12:25:31 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.46<-21564 Statuses=0009 0009 12:25:31 Msec=0 True Az=135.75 Ze=-143.46 Az status=0009 Ze status=0009 12:25:31 Check angles 12:25:31 SkyScan query 12:25:32 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.04<-20136 Statuses=0009 0009 12:25:32 Msec=750 True Az=153.6 Ze=-122.04 Az status=0009 Ze status=0009 12:25:32 Check angles 12:25:32 SkyScan query 12:25:33 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.07<-18738 Statuses=0009 0009 12:25:33 Msec=1500 True Az=171.105 Ze=-101.07 Az status=0009 Ze status=0009 12:25:33 Check angles 12:25:33 SkyScan query 12:25:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.175<-17345 Statuses=0008 0009 12:25:33 Msec=2250 True Az=176.01 Ze=-80.175 Az status=0008 Ze status=0009 12:25:34 Check angles 12:25:34 SkyScan query 12:25:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.71<-15914 Statuses=0008 0009 12:25:34 Msec=3000 True Az=176.01 Ze=-58.71 Az status=0008 Ze status=0009 12:25:34 Check angles 12:25:34 SkyScan query 12:25:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:25:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:25:35 Message to Master queued w/err=0: serial=142476 error=0 12:25:40 Received message from Master: op=Filter serial=142477 12:25:40 Color wheel filter change from 0 to 0 12:25:40 FLIGetFilterPos err=0 currentPosition=0 12:25:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:40 Filter is already there-color wheel unchanged 12:25:40 Received message from Master: op=Shutter serial=142478 12:25:40 Shutter LASER close 12:25:40 Received message from Camera: op=State serial=142480 12:25:40 GetSingleValue result=40 Value=cccccccc 12:25:40 SkyScan query 12:25:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:25:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:41 Parameters OK 12:25:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:41 Set A/D data flow result=40 [UTC 2018-12-14 12:25:41] 12:25:41 Set A/D channel type result=40 12:25:41 Set A/D encoding result=40 12:25:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:41 Set channel filter=0.000000e+000 result=40 12:25:41 Config A/D Result=40 12:25:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:41 Get A/D filter: -9.255963e+061 result=40 12:25:41 Get A/D value=-858993460 result=40 12:25:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:41 Parameters OK 12:25:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:41 Set A/D data flow result=40 12:25:41 Set A/D channel type result=40 12:25:41 Set A/D encoding result=40 12:25:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:41 Set channel filter=0.000000e+000 result=40 12:25:41 Config A/D Result=40 12:25:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:41 Get A/D filter: -9.255963e+061 result=40 12:25:41 Get A/D value=-858993460 result=40 12:25:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:41 Aux= 12:25:41 Message to Camera, serial 142480 queued 12:26:17 Received message from Master: op=PointingHead serial=142492 12:26:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:26:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:26:17 Point started: ret=0 12:26:17 point_skyscan result=0 12:26:18 Check angles 12:26:18 SkyScan query 12:26:18 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.005<-13467 Statuses=0009 0009 12:26:18 Msec=0 True Az=153.21 Ze=-22.005 Az status=0009 Ze status=0009 12:26:19 Check angles 12:26:19 SkyScan query 12:26:19 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.02<-12068 Statuses=0009 0009 12:26:19 Msec=750 True Az=135.78 Ze=-1.02 Az status=0009 Ze status=0009 12:26:19 Check angles 12:26:19 SkyScan query 12:26:20 SkyScan query done: ret=0 az=118.215<-7881 ze=19.905<-10673 Statuses=0009 0009 12:26:20 Msec=1500 True Az=118.215 Ze=19.905 Az status=0009 Ze status=0009 12:26:20 Check angles 12:26:20 SkyScan query 12:26:21 SkyScan query done: ret=0 az=100.845<-6723 ze=40.905<-9273 Statuses=0009 0009 12:26:21 Msec=2250 True Az=100.845 Ze=40.905 Az status=0009 Ze status=0009 12:26:21 Check angles 12:26:21 SkyScan query 12:26:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 12:26:21 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 12:26:22 Check angles 12:26:22 SkyScan query 12:26:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:26:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:26:22 Message to Master queued w/err=0: serial=142492 error=0 12:26:27 Received message from Master: op=Filter serial=142493 12:26:27 Color wheel filter change from 0 to 0 12:26:27 FLIGetFilterPos err=0 currentPosition=0 12:26:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:27 Filter is already there-color wheel unchanged 12:26:27 Received message from Master: op=Shutter serial=142494 12:26:27 Shutter LASER close 12:26:27 Received message from Camera: op=State serial=142496 12:26:27 GetSingleValue result=40 Value=cccccccc 12:26:27 SkyScan query 12:26:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:26:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:28 Parameters OK 12:26:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:28 Set A/D data flow result=40 12:26:28 Set A/D channel type result=40 12:26:28 Set A/D encoding result=40 12:26:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:28 Set channel filter=0.000000e+000 result=40 12:26:28 Config A/D Result=40 12:26:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:28 Get A/D filter: -9.255963e+061 result=40 12:26:28 Get A/D value=-858993460 result=40 12:26:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:28 Parameters OK 12:26:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:28 Set A/D data flow result=40 12:26:28 Set A/D channel type result=40 12:26:28 Set A/D encoding result=40 12:26:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:28 Set channel filter=0.000000e+000 result=40 12:26:28 Config A/D Result=40 12:26:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:28 Get A/D filter: -9.255963e+061 result=40 12:26:28 Get A/D value=-858993460 result=40 12:26:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:28 Aux= 12:26:28 Message to Camera, serial 142496 queued 12:27:05 Received message from Master: op=PointingHead serial=142509 12:27:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:27:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:27:05 Point started: ret=0 12:27:05 point_skyscan result=0 12:27:06 Check angles 12:27:06 SkyScan query 12:27:06 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 12:27:06 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 12:27:07 Check angles 12:27:07 SkyScan query 12:27:07 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 12:27:07 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 12:27:07 Check angles 12:27:07 SkyScan query 12:27:08 SkyScan query done: ret=0 az=143.91<-9594 ze=38.505<-9433 Statuses=0009 0008 12:27:08 Msec=1500 True Az=143.91 Ze=38.505 Az status=0009 Ze status=0008 12:27:08 Check angles 12:27:08 SkyScan query 12:27:09 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 12:27:09 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 12:27:09 Check angles 12:27:09 SkyScan query 12:27:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:27:09 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:27:10 Check angles 12:27:10 SkyScan query 12:27:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:27:10 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:27:10 Message to Master queued w/err=0: serial=142509 error=0 12:27:15 Received message from Master: op=Filter serial=142510 12:27:15 Color wheel filter change from 0 to 0 12:27:15 FLIGetFilterPos err=0 currentPosition=0 12:27:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:15 Filter is already there-color wheel unchanged 12:27:15 Received message from Master: op=Shutter serial=142511 12:27:15 Shutter LASER close 12:27:15 Received message from Camera: op=State serial=142513 12:27:15 GetSingleValue result=40 Value=cccccccc 12:27:15 SkyScan query 12:27:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:27:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:16 Parameters OK 12:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:16 Set A/D data flow result=40 12:27:16 Set A/D channel type result=40 12:27:16 Set A/D encoding result=40 12:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:16 Set channel filter=0.000000e+000 result=40 12:27:16 Config A/D Result=40 12:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:16 Get A/D filter: -9.255963e+061 result=40 12:27:16 Get A/D value=-858993460 result=40 12:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:16 Parameters OK 12:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:16 Set A/D data flow result=40 12:27:16 Set A/D channel type result=40 12:27:16 Set A/D encoding result=40 12:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:16 Set channel filter=0.000000e+000 result=40 12:27:16 Config A/D Result=40 12:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:16 Get A/D filter: -9.255963e+061 result=40 12:27:16 Get A/D value=-858993460 result=40 12:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:16 Aux= 12:27:16 Message to Camera, serial 142513 queued 12:27:53 Received message from Master: op=PointingHead serial=142526 12:27:53 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:27:53 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:27:53 Point started: ret=0 12:27:53 point_skyscan result=0 12:27:54 Check angles 12:27:54 SkyScan query 12:27:54 SkyScan query done: ret=0 az=153.195<-10213 ze=8.955<-11403 Statuses=0009 0009 12:27:54 Msec=0 True Az=153.195 Ze=8.955 Az status=0009 Ze status=0009 12:27:55 Check angles 12:27:55 SkyScan query 12:27:55 SkyScan query done: ret=0 az=135.765<-9051 ze=-12.075<-12805 Statuses=0009 0009 12:27:55 Msec=750 True Az=135.765 Ze=-12.075 Az status=0009 Ze status=0009 12:27:55 Check angles 12:27:55 SkyScan query 12:27:56 SkyScan query done: ret=0 az=118.155<-7877 ze=-32.97<-14198 Statuses=0009 0009 12:27:56 Msec=1500 True Az=118.155 Ze=-32.97 Az status=0009 Ze status=0009 12:27:56 Check angles 12:27:56 SkyScan query 12:27:57 SkyScan query done: ret=0 az=100.755<-6717 ze=-51.51<-15434 Statuses=0009 0009 12:27:57 Msec=2250 True Az=100.755 Ze=-51.51 Az status=0009 Ze status=0009 12:27:57 Check angles 12:27:57 SkyScan query 12:27:57 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:27:57 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:27:58 Check angles 12:27:58 SkyScan query 12:27:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:27:58 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:27:58 Message to Master queued w/err=0: serial=142526 error=0 12:28:03 Received message from Master: op=Filter serial=142527 12:28:03 Color wheel filter change from 0 to 0 12:28:03 FLIGetFilterPos err=0 currentPosition=0 12:28:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:03 Filter is already there-color wheel unchanged 12:28:03 Received message from Master: op=Shutter serial=142528 12:28:03 Shutter LASER close 12:28:03 Received message from Camera: op=State serial=142530 12:28:03 GetSingleValue result=40 Value=cccccccc 12:28:03 SkyScan query 12:28:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:28:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:04 Parameters OK 12:28:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:04 Set A/D data flow result=40 12:28:04 Set A/D channel type result=40 12:28:04 Set A/D encoding result=40 12:28:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:04 Set channel filter=0.000000e+000 result=40 12:28:04 Config A/D Result=40 12:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:04 Get A/D filter: -9.255963e+061 result=40 12:28:04 Get A/D value=-858993460 result=40 12:28:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:04 Parameters OK 12:28:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:04 Set A/D data flow result=40 12:28:04 Set A/D channel type result=40 12:28:04 Set A/D encoding result=40 12:28:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:04 Set channel filter=0.000000e+000 result=40 12:28:04 Config A/D Result=40 12:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:04 Get A/D filter: -9.255963e+061 result=40 12:28:04 Get A/D value=-858993460 result=40 12:28:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:04 Aux= 12:28:04 Message to Camera, serial 142530 queued 12:28:41 Received message from Master: op=PointingHead serial=142543 12:28:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:28:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:28:41 Point started: ret=0 12:28:41 point_skyscan result=0 12:28:42 Check angles 12:28:42 SkyScan query 12:28:43 SkyScan query done: ret=0 az=108.795<-7253 ze=-80.985<-17399 Statuses=0009 0009 12:28:43 Msec=0 True Az=108.795 Ze=-80.985 Az status=0009 Ze status=0009 12:28:43 Check angles 12:28:43 SkyScan query 12:28:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.955<-18797 Statuses=0008 0009 12:28:43 Msec=750 True Az=112.995 Ze=-101.955 Az status=0008 Ze status=0009 12:28:43 Check angles 12:28:43 SkyScan query 12:28:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.895<-20193 Statuses=0008 0009 12:28:44 Msec=1500 True Az=112.995 Ze=-122.895 Az status=0008 Ze status=0009 12:28:44 Check angles 12:28:44 SkyScan query 12:28:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.88<-21592 Statuses=0008 0009 12:28:45 Msec=2250 True Az=112.995 Ze=-143.88 Az status=0008 Ze status=0009 12:28:45 Check angles 12:28:45 SkyScan query 12:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 12:28:46 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 12:28:46 Check angles 12:28:46 SkyScan query 12:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:28:46 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:28:46 Message to Master queued w/err=0: serial=142543 error=0 12:28:51 Received message from Master: op=Filter serial=142544 12:28:51 Color wheel filter change from 0 to 0 12:28:51 FLIGetFilterPos err=0 currentPosition=0 12:28:51 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:51 Filter is already there-color wheel unchanged 12:28:51 Received message from Master: op=Shutter serial=142545 12:28:51 Shutter LASER open 12:28:52 Received message from Camera: op=State serial=142547 12:28:52 GetSingleValue result=40 Value=cccccccc 12:28:52 SkyScan query 12:28:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:28:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:52 Parameters OK 12:28:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:52 Set A/D data flow result=40 12:28:52 Set A/D channel type result=40 12:28:52 Set A/D encoding result=40 12:28:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:52 Set channel filter=0.000000e+000 result=40 12:28:52 Config A/D Result=40 12:28:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:52 Get A/D filter: -9.255963e+061 result=40 12:28:52 Get A/D value=-858993460 result=40 12:28:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:52 Parameters OK 12:28:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:52 Set A/D data flow result=40 12:28:52 Set A/D channel type result=40 12:28:52 Set A/D encoding result=40 12:28:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:52 Set channel filter=0.000000e+000 result=40 12:28:52 Config A/D Result=40 12:28:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:52 Get A/D filter: -9.255963e+061 result=40 12:28:52 Get A/D value=-858993460 result=40 12:28:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:52 Aux= 12:28:52 Message to Camera, serial 142547 queued 12:29:01 Received message from Master: op=Shutter serial=142557 12:29:01 Shutter LASER close 12:29:01 Received message from Master: op=PointingHead serial=142561 12:29:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:29:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:29:01 Point started: ret=0 12:29:01 point_skyscan result=0 12:29:02 Check angles 12:29:02 SkyScan query 12:29:03 SkyScan query done: ret=0 az=90.06<-6004 ze=157.395<-1507 Statuses=0009 0009 12:29:03 Msec=0 True Az=90.06 Ze=157.395 Az status=0009 Ze status=0009 12:29:03 Check angles 12:29:03 SkyScan query 12:29:04 SkyScan query done: ret=0 az=72.555<-4837 ze=136.425<-2905 Statuses=0009 0009 12:29:04 Msec=750 True Az=72.555 Ze=136.425 Az status=0009 Ze status=0009 12:29:04 Check angles 12:29:04 SkyScan query 12:29:04 SkyScan query done: ret=0 az=55.155<-3677 ze=115.5<-4300 Statuses=0009 0009 12:29:04 Msec=1500 True Az=55.155 Ze=115.5 Az status=0009 Ze status=0009 12:29:04 Check angles 12:29:04 SkyScan query 12:29:05 SkyScan query done: ret=0 az=40.98<-2732 ze=94.515<-5699 Statuses=0009 0009 12:29:05 Msec=2250 True Az=40.98 Ze=94.515 Az status=0009 Ze status=0009 12:29:05 Check angles 12:29:05 SkyScan query 12:29:06 SkyScan query done: ret=0 az=40.995<-2733 ze=73.545<-7097 Statuses=0008 0009 12:29:06 Msec=3000 True Az=40.995 Ze=73.545 Az status=0008 Ze status=0009 12:29:06 Check angles 12:29:06 SkyScan query 12:29:07 SkyScan query done: ret=0 az=40.995<-2733 ze=52.935<-8471 Statuses=0008 0009 12:29:07 Msec=3750 True Az=40.995 Ze=52.935 Az status=0008 Ze status=0009 12:29:07 Check angles 12:29:07 SkyScan query 12:29:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:29:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:29:07 Message to Master queued w/err=0: serial=142561 error=0 12:29:12 Received message from Master: op=Filter serial=142562 12:29:12 Color wheel filter change from 0 to 0 12:29:12 FLIGetFilterPos err=0 currentPosition=0 12:29:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:12 Filter is already there-color wheel unchanged 12:29:12 Received message from Master: op=Shutter serial=142563 12:29:12 Shutter LASER close 12:29:13 Received message from Camera: op=State serial=142565 12:29:13 GetSingleValue result=40 Value=cccccccc 12:29:13 SkyScan query 12:29:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:29:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:13 Parameters OK 12:29:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:13 Set A/D data flow result=40 12:29:13 Set A/D channel type result=40 12:29:13 Set A/D encoding result=40 12:29:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:13 Set channel filter=0.000000e+000 result=40 12:29:13 Config A/D Result=40 12:29:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:13 Get A/D filter: -9.255963e+061 result=40 12:29:13 Get A/D value=-858993460 result=40 12:29:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:13 Parameters OK 12:29:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:13 Set A/D data flow result=40 12:29:13 Set A/D channel type result=40 12:29:13 Set A/D encoding result=40 12:29:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:13 Set channel filter=0.000000e+000 result=40 12:29:13 Config A/D Result=40 12:29:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:13 Get A/D filter: -9.255963e+061 result=40 12:29:13 Get A/D value=-858993460 result=40 12:29:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:13 Aux= 12:29:13 Message to Camera, serial 142565 queued 12:29:50 Received message from Master: op=PointingHead serial=142578 12:29:50 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:29:50 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:29:50 Point started: ret=0 12:29:50 point_skyscan result=0 12:29:51 Check angles 12:29:51 SkyScan query 12:29:52 SkyScan query done: ret=0 az=63.915<-4261 ze=66.54<-7564 Statuses=0009 0008 12:29:52 Msec=0 True Az=63.915 Ze=66.54 Az status=0009 Ze status=0008 12:29:52 Check angles 12:29:52 SkyScan query 12:29:52 SkyScan query done: ret=0 az=81.33<-5422 ze=66.51<-7566 Statuses=0009 0008 12:29:52 Msec=750 True Az=81.33 Ze=66.51 Az status=0009 Ze status=0008 12:29:53 Check angles 12:29:53 SkyScan query 12:29:53 SkyScan query done: ret=0 az=98.82<-6588 ze=66.495<-7567 Statuses=0009 0008 12:29:53 Msec=1500 True Az=98.82 Ze=66.495 Az status=0009 Ze status=0008 12:29:53 Check angles 12:29:53 SkyScan query 12:29:54 SkyScan query done: ret=0 az=116.4<-7760 ze=66.495<-7567 Statuses=0009 0008 12:29:54 Msec=2250 True Az=116.4 Ze=66.495 Az status=0009 Ze status=0008 12:29:54 Check angles 12:29:54 SkyScan query 12:29:55 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 12:29:55 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 12:29:55 Check angles 12:29:55 SkyScan query 12:29:55 SkyScan query done: ret=0 az=151.935<-10129 ze=66.495<-7567 Statuses=0009 0008 12:29:55 Msec=3750 True Az=151.935 Ze=66.495 Az status=0009 Ze status=0008 12:29:56 Check angles 12:29:56 SkyScan query 12:29:56 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:29:56 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:29:56 Message to Master queued w/err=0: serial=142578 error=0 12:30:01 Received message from Master: op=Filter serial=142579 12:30:01 Color wheel filter change from 0 to 0 12:30:01 FLIGetFilterPos err=0 currentPosition=0 12:30:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:01 Filter is already there-color wheel unchanged 12:30:01 Received message from Master: op=Shutter serial=142580 12:30:01 Shutter LASER close 12:30:01 Received message from Camera: op=State serial=142582 12:30:01 GetSingleValue result=40 Value=cccccccc 12:30:01 SkyScan query 12:30:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:30:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:02 Parameters OK 12:30:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:02 Set A/D data flow result=40 12:30:02 Set A/D channel type result=40 12:30:02 Set A/D encoding result=40 12:30:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:02 Set channel filter=0.000000e+000 result=40 12:30:02 Config A/D Result=40 12:30:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:02 Get A/D filter: -9.255963e+061 result=40 12:30:02 Get A/D value=-858993460 result=40 12:30:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:02 Parameters OK 12:30:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:02 Set A/D data flow result=40 12:30:02 Set A/D channel type result=40 12:30:02 Set A/D encoding result=40 12:30:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:02 Set channel filter=0.000000e+000 result=40 12:30:02 Config A/D Result=40 12:30:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:02 Get A/D filter: -9.255963e+061 result=40 12:30:02 Get A/D value=-858993460 result=40 12:30:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:02 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:02 Aux= 12:30:02 Message to Camera, serial 142582 queued 12:30:39 Received message from Master: op=PointingHead serial=142595 12:30:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:30:39 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:30:39 Point started: ret=0 12:30:39 point_skyscan result=0 12:30:40 Check angles 12:30:40 SkyScan query 12:30:41 SkyScan query done: ret=0 az=134.745<-8983 ze=36.405<-9573 Statuses=0009 0009 12:30:41 Msec=0 True Az=134.745 Ze=36.405 Az status=0009 Ze status=0009 12:30:41 Check angles 12:30:41 SkyScan query 12:30:41 SkyScan query done: ret=0 az=116.91<-7794 ze=15<-11000 Statuses=0009 0009 12:30:41 Msec=750 True Az=116.91 Ze=15 Az status=0009 Ze status=0009 12:30:41 Check angles 12:30:41 SkyScan query 12:30:42 SkyScan query done: ret=0 az=99.45<-6630 ze=-6<-12400 Statuses=0009 0009 12:30:42 Msec=1500 True Az=99.45 Ze=-6 Az status=0009 Ze status=0009 12:30:42 Check angles 12:30:42 SkyScan query 12:30:43 SkyScan query done: ret=0 az=82.02<-5468 ze=-26.955<-13797 Statuses=0009 0009 12:30:43 Msec=2250 True Az=82.02 Ze=-26.955 Az status=0009 Ze status=0009 12:30:43 Check angles 12:30:43 SkyScan query 12:30:44 SkyScan query done: ret=0 az=64.56<-4304 ze=-38.58<-14572 Statuses=0009 0008 12:30:44 Msec=3000 True Az=64.56 Ze=-38.58 Az status=0009 Ze status=0008 12:30:44 Check angles 12:30:44 SkyScan query 12:30:44 SkyScan query done: ret=0 az=47.1<-3140 ze=-38.52<-14568 Statuses=0009 0008 12:30:44 Msec=3750 True Az=47.1 Ze=-38.52 Az status=0009 Ze status=0008 12:30:44 Check angles 12:30:44 SkyScan query 12:30:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:30:45 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:30:45 Message to Master queued w/err=0: serial=142595 error=0 12:30:50 Received message from Master: op=Filter serial=142596 12:30:50 Color wheel filter change from 0 to 0 12:30:50 FLIGetFilterPos err=0 currentPosition=0 12:30:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:50 Filter is already there-color wheel unchanged 12:30:50 Received message from Master: op=Shutter serial=142597 12:30:50 Shutter LASER close 12:30:50 Received message from Camera: op=State serial=142599 12:30:50 GetSingleValue result=40 Value=cccccccc 12:30:50 SkyScan query 12:30:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:30:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:51 Parameters OK 12:30:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:51 Set A/D data flow result=40 12:30:51 Set A/D channel type result=40 12:30:51 Set A/D encoding result=40 12:30:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:51 Set channel filter=0.000000e+000 result=40 12:30:51 Config A/D Result=40 12:30:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:51 Get A/D filter: -9.255963e+061 result=40 12:30:51 Get A/D value=-858993460 result=40 12:30:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:51 Parameters OK 12:30:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:51 Set A/D data flow result=40 12:30:51 Set A/D channel type result=40 12:30:51 Set A/D encoding result=40 12:30:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:51 Set channel filter=0.000000e+000 result=40 12:30:51 Config A/D Result=40 12:30:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:51 Get A/D filter: -9.255963e+061 result=40 12:30:51 Get A/D value=-858993460 result=40 12:30:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:51 Aux= 12:30:51 Message to Camera, serial 142599 queued 12:31:27 Received message from Master: op=PointingHead serial=142611 12:31:27 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:31:27 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:31:27 Point started: ret=0 12:31:27 point_skyscan result=0 12:31:28 Check angles 12:31:28 SkyScan query 12:31:28 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.355<-16557 Statuses=0009 0009 12:31:28 Msec=0 True Az=64.005 Ze=-68.355 Az status=0009 Ze status=0009 12:31:29 Check angles 12:31:29 SkyScan query 12:31:29 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.325<-17955 Statuses=0009 0009 12:31:29 Msec=750 True Az=81.57 Ze=-89.325 Az status=0009 Ze status=0009 12:31:29 Check angles 12:31:29 SkyScan query 12:31:30 SkyScan query done: ret=0 az=99<-6600 ze=-110.25<-19350 Statuses=0009 0009 12:31:30 Msec=1500 True Az=99 Ze=-110.25 Az status=0009 Ze status=0009 12:31:30 Check angles 12:31:30 SkyScan query 12:31:31 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.67<-20778 Statuses=0009 0009 12:31:31 Msec=2250 True Az=116.82 Ze=-131.67 Az status=0009 Ze status=0009 12:31:31 Check angles 12:31:31 SkyScan query 12:31:31 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 12:31:31 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 12:31:32 Check angles 12:31:32 SkyScan query 12:31:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 12:31:32 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 12:31:32 Message to Master queued w/err=0: serial=142611 error=0 12:31:37 Received message from Master: op=Filter serial=142612 12:31:37 Color wheel filter change from 0 to 0 12:31:37 FLIGetFilterPos err=0 currentPosition=0 12:31:37 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:37 Filter is already there-color wheel unchanged 12:31:37 Received message from Master: op=Shutter serial=142613 12:31:37 Shutter LASER close 12:31:37 Received message from Camera: op=State serial=142615 12:31:37 GetSingleValue result=40 Value=cccccccc 12:31:37 SkyScan query 12:31:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:31:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:38 Parameters OK 12:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:38 Set A/D data flow result=40 12:31:38 Set A/D channel type result=40 12:31:38 Set A/D encoding result=40 12:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:38 Set channel filter=0.000000e+000 result=40 12:31:38 Config A/D Result=40 12:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:38 Get A/D filter: -9.255963e+061 result=40 12:31:38 Get A/D value=-858993460 result=40 12:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:38 Parameters OK 12:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:38 Set A/D data flow result=40 12:31:38 Set A/D channel type result=40 12:31:38 Set A/D encoding result=40 12:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:38 Set channel filter=0.000000e+000 result=40 12:31:38 Config A/D Result=40 12:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:38 Get A/D filter: -9.255963e+061 result=40 12:31:38 Get A/D value=-858993460 result=40 12:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:38 Aux= 12:31:38 Message to Camera, serial 142615 queued 12:32:15 Received message from Master: op=PointingHead serial=142628 12:32:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:32:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:32:15 Point started: ret=0 12:32:15 point_skyscan result=0 12:32:16 Check angles 12:32:16 SkyScan query 12:32:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 12:32:16 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 12:32:17 Check angles 12:32:17 SkyScan query 12:32:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:32:17 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:32:17 Message to Master queued w/err=0: serial=142628 error=0 12:32:22 Received message from Master: op=Filter serial=142629 12:32:22 Color wheel filter change from 0 to 0 12:32:22 FLIGetFilterPos err=0 currentPosition=0 12:32:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:22 Filter is already there-color wheel unchanged 12:32:22 Received message from Master: op=Shutter serial=142630 12:32:22 Shutter LASER open 12:32:23 Received message from Camera: op=State serial=142632 12:32:23 GetSingleValue result=40 Value=cccccccc 12:32:23 SkyScan query 12:32:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:32:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:23 Parameters OK 12:32:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:23 Set A/D data flow result=40 12:32:23 Set A/D channel type result=40 12:32:23 Set A/D encoding result=40 12:32:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:23 Set channel filter=0.000000e+000 result=40 12:32:23 Config A/D Result=40 12:32:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:23 Get A/D filter: -9.255963e+061 result=40 12:32:23 Get A/D value=-858993460 result=40 12:32:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:23 Parameters OK 12:32:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:23 Set A/D data flow result=40 12:32:23 Set A/D channel type result=40 12:32:23 Set A/D encoding result=40 12:32:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:23 Set channel filter=0.000000e+000 result=40 12:32:23 Config A/D Result=40 12:32:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:23 Get A/D filter: -9.255963e+061 result=40 12:32:23 Get A/D value=-858993460 result=40 12:32:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:23 Aux= 12:32:23 Message to Camera, serial 142632 queued 12:32:32 Received message from Master: op=Shutter serial=142642 12:32:32 Shutter LASER close 12:32:32 Received message from Master: op=PointingHead serial=142646 12:32:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:32:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:32:32 Point started: ret=0 12:32:32 point_skyscan result=0 12:32:33 Check angles 12:32:33 SkyScan query 12:32:34 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.92<-21528 Statuses=0009 0009 12:32:34 Msec=0 True Az=136.23 Ze=-142.92 Az status=0009 Ze status=0009 12:32:34 Check angles 12:32:34 SkyScan query 12:32:35 SkyScan query done: ret=0 az=154.215<-10281 ze=-121.53<-20102 Statuses=0009 0009 12:32:35 Msec=750 True Az=154.215 Ze=-121.53 Az status=0009 Ze status=0009 12:32:35 Check angles 12:32:35 SkyScan query 12:32:35 SkyScan query done: ret=0 az=171.63<-11442 ze=-100.485<-18699 Statuses=0009 0009 12:32:35 Msec=1500 True Az=171.63 Ze=-100.485 Az status=0009 Ze status=0009 12:32:36 Check angles 12:32:36 SkyScan query 12:32:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.575<-17305 Statuses=0008 0009 12:32:36 Msec=2250 True Az=176.01 Ze=-79.575 Az status=0008 Ze status=0009 12:32:36 Check angles 12:32:36 SkyScan query 12:32:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.155<-15877 Statuses=0008 0009 12:32:37 Msec=3000 True Az=176.01 Ze=-58.155 Az status=0008 Ze status=0009 12:32:37 Check angles 12:32:37 SkyScan query 12:32:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:32:38 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:32:38 Message to Master queued w/err=0: serial=142646 error=0 12:32:43 Received message from Master: op=Filter serial=142647 12:32:43 Color wheel filter change from 0 to 0 12:32:43 FLIGetFilterPos err=0 currentPosition=0 12:32:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:43 Filter is already there-color wheel unchanged 12:32:43 Received message from Master: op=Shutter serial=142648 12:32:43 Shutter LASER close 12:32:43 Received message from Camera: op=State serial=142650 12:32:43 GetSingleValue result=40 Value=cccccccc 12:32:43 SkyScan query 12:32:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:32:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:44 Parameters OK 12:32:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:44 Set A/D data flow result=40 12:32:44 Set A/D channel type result=40 12:32:44 Set A/D encoding result=40 12:32:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:44 Set channel filter=0.000000e+000 result=40 12:32:44 Config A/D Result=40 12:32:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:44 Get A/D filter: -9.255963e+061 result=40 12:32:44 Get A/D value=-858993460 result=40 12:32:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:44 Parameters OK 12:32:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:44 Set A/D data flow result=40 12:32:44 Set A/D channel type result=40 12:32:44 Set A/D encoding result=40 12:32:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:44 Set channel filter=0.000000e+000 result=40 12:32:44 Config A/D Result=40 12:32:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:44 Get A/D filter: -9.255963e+061 result=40 12:32:44 Get A/D value=-858993460 result=40 12:32:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:44 Aux= 12:32:44 Message to Camera, serial 142650 queued 12:33:20 Received message from Master: op=PointingHead serial=142663 12:33:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:33:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:33:21 Point started: ret=0 12:33:21 point_skyscan result=0 12:33:21 Check angles 12:33:21 SkyScan query 12:33:22 SkyScan query done: ret=0 az=153.285<-10219 ze=-22.08<-13472 Statuses=0009 0009 12:33:22 Msec=0 True Az=153.285 Ze=-22.08 Az status=0009 Ze status=0009 12:33:22 Check angles 12:33:22 SkyScan query 12:33:23 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.645<-12043 Statuses=0009 0009 12:33:23 Msec=750 True Az=135.36 Ze=-0.645 Az status=0009 Ze status=0009 12:33:23 Check angles 12:33:23 SkyScan query 12:33:24 SkyScan query done: ret=0 az=117.93<-7862 ze=20.325<-10645 Statuses=0009 0009 12:33:24 Msec=1500 True Az=117.93 Ze=20.325 Az status=0009 Ze status=0009 12:33:24 Check angles 12:33:24 SkyScan query 12:33:24 SkyScan query done: ret=0 az=100.425<-6695 ze=41.295<-9247 Statuses=0009 0009 12:33:24 Msec=2250 True Az=100.425 Ze=41.295 Az status=0009 Ze status=0009 12:33:24 Check angles 12:33:24 SkyScan query 12:33:25 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 12:33:25 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 12:33:25 Check angles 12:33:25 SkyScan query 12:33:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:33:26 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:33:26 Message to Master queued w/err=0: serial=142663 error=0 12:33:31 Received message from Master: op=Filter serial=142664 12:33:31 Color wheel filter change from 0 to 0 12:33:31 FLIGetFilterPos err=0 currentPosition=0 12:33:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:31 Filter is already there-color wheel unchanged 12:33:31 Received message from Master: op=Shutter serial=142665 12:33:31 Shutter LASER close 12:33:31 Received message from Camera: op=State serial=142667 12:33:31 GetSingleValue result=40 Value=cccccccc 12:33:31 SkyScan query 12:33:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:33:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:32 Parameters OK 12:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:32 Set A/D data flow result=40 12:33:32 Set A/D channel type result=40 12:33:32 Set A/D encoding result=40 12:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:32 Set channel filter=0.000000e+000 result=40 12:33:32 Config A/D Result=40 12:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:32 Get A/D filter: -9.255963e+061 result=40 12:33:32 Get A/D value=-858993460 result=40 12:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:32 Parameters OK 12:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:32 Set A/D data flow result=40 12:33:32 Set A/D channel type result=40 12:33:32 Set A/D encoding result=40 12:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:32 Set channel filter=0.000000e+000 result=40 12:33:32 Config A/D Result=40 12:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:32 Get A/D filter: -9.255963e+061 result=40 12:33:32 Get A/D value=-858993460 result=40 12:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:32 Aux= 12:33:32 Message to Camera, serial 142667 queued 12:34:08 Received message from Master: op=PointingHead serial=142680 12:34:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:34:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:34:09 Point started: ret=0 12:34:09 point_skyscan result=0 12:34:10 Check angles 12:34:10 SkyScan query 12:34:10 SkyScan query done: ret=0 az=108.975<-7265 ze=38.475<-9435 Statuses=0009 0008 12:34:10 Msec=0 True Az=108.975 Ze=38.475 Az status=0009 Ze status=0008 12:34:10 Check angles 12:34:10 SkyScan query 12:34:11 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 12:34:11 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 12:34:11 Check angles 12:34:11 SkyScan query 12:34:12 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 12:34:12 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 12:34:12 Check angles 12:34:12 SkyScan query 12:34:12 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 12:34:12 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 12:34:13 Check angles 12:34:13 SkyScan query 12:34:13 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:34:13 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:34:13 Check angles 12:34:13 SkyScan query 12:34:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:34:14 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:34:14 Message to Master queued w/err=0: serial=142680 error=0 12:34:19 Received message from Master: op=Filter serial=142681 12:34:19 Color wheel filter change from 0 to 0 12:34:19 FLIGetFilterPos err=0 currentPosition=0 12:34:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:19 Filter is already there-color wheel unchanged 12:34:19 Received message from Master: op=Shutter serial=142682 12:34:19 Shutter LASER close 12:34:19 Received message from Camera: op=State serial=142684 12:34:19 GetSingleValue result=40 Value=cccccccc 12:34:19 SkyScan query 12:34:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:34:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:20 Parameters OK 12:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:20 Set A/D data flow result=40 12:34:20 Set A/D channel type result=40 12:34:20 Set A/D encoding result=40 12:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:20 Set channel filter=0.000000e+000 result=40 12:34:20 Config A/D Result=40 12:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:20 Get A/D filter: -9.255963e+061 result=40 12:34:20 Get A/D value=-858993460 result=40 12:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:20 Parameters OK 12:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:20 Set A/D data flow result=40 12:34:20 Set A/D channel type result=40 12:34:20 Set A/D encoding result=40 12:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:20 Set channel filter=0.000000e+000 result=40 12:34:20 Config A/D Result=40 12:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:20 Get A/D filter: -9.255963e+061 result=40 12:34:20 Get A/D value=-858993460 result=40 12:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:20 Aux= 12:34:20 Message to Camera, serial 142684 queued 12:34:56 Received message from Master: op=PointingHead serial=142697 12:34:56 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:34:56 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:34:57 Point started: ret=0 12:34:57 point_skyscan result=0 12:34:58 Check angles 12:34:58 SkyScan query 12:34:58 SkyScan query done: ret=0 az=152.745<-10183 ze=8.34<-11444 Statuses=0009 0009 12:34:58 Msec=0 True Az=152.745 Ze=8.34 Az status=0009 Ze status=0009 12:34:58 Check angles 12:34:58 SkyScan query 12:34:59 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.525<-12835 Statuses=0009 0009 12:34:59 Msec=750 True Az=135.315 Ze=-12.525 Az status=0009 Ze status=0009 12:34:59 Check angles 12:34:59 SkyScan query 12:35:00 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.63<-14242 Statuses=0009 0009 12:35:00 Msec=1500 True Az=117.765 Ze=-33.63 Az status=0009 Ze status=0009 12:35:00 Check angles 12:35:00 SkyScan query 12:35:00 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.555<-15437 Statuses=0009 0009 12:35:00 Msec=2250 True Az=100.44 Ze=-51.555 Az status=0009 Ze status=0009 12:35:01 Check angles 12:35:01 SkyScan query 12:35:01 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 12:35:01 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 12:35:01 Check angles 12:35:01 SkyScan query 12:35:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:35:02 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:35:02 Message to Master queued w/err=0: serial=142697 error=0 12:35:07 Received message from Master: op=Filter serial=142698 12:35:07 Color wheel filter change from 0 to 0 12:35:07 FLIGetFilterPos err=0 currentPosition=0 12:35:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:07 Filter is already there-color wheel unchanged 12:35:07 Received message from Master: op=Shutter serial=142699 12:35:07 Shutter LASER close 12:35:07 Received message from Camera: op=State serial=142701 12:35:07 GetSingleValue result=40 Value=cccccccc 12:35:07 SkyScan query 12:35:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:35:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:08 Parameters OK 12:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:08 Set A/D data flow result=40 12:35:08 Set A/D channel type result=40 12:35:08 Set A/D encoding result=40 12:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:08 Set channel filter=0.000000e+000 result=40 12:35:08 Config A/D Result=40 12:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:08 Get A/D filter: -9.255963e+061 result=40 12:35:08 Get A/D value=-858993460 result=40 12:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:08 Parameters OK 12:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:08 Set A/D data flow result=40 12:35:08 Set A/D channel type result=40 12:35:08 Set A/D encoding result=40 12:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:08 Set channel filter=0.000000e+000 result=40 12:35:08 Config A/D Result=40 12:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:08 Get A/D filter: -9.255963e+061 result=40 12:35:08 Get A/D value=-858993460 result=40 12:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:08 Aux= 12:35:08 Message to Camera, serial 142701 queued 12:35:45 Received message from Master: op=PointingHead serial=142714 12:35:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:35:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:35:45 Point started: ret=0 12:35:45 point_skyscan result=0 12:35:46 Check angles 12:35:46 SkyScan query 12:35:46 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.435<-17429 Statuses=0009 0009 12:35:46 Msec=0 True Az=109.125 Ze=-81.435 Az status=0009 Ze status=0009 12:35:47 Check angles 12:35:47 SkyScan query 12:35:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.825<-18855 Statuses=0008 0009 12:35:47 Msec=750 True Az=112.995 Ze=-102.825 Az status=0008 Ze status=0009 12:35:47 Check angles 12:35:47 SkyScan query 12:35:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.795<-20253 Statuses=0008 0009 12:35:48 Msec=1500 True Az=112.995 Ze=-123.795 Az status=0008 Ze status=0009 12:35:48 Check angles 12:35:48 SkyScan query 12:35:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 12:35:49 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 12:35:49 Check angles 12:35:49 SkyScan query 12:35:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.095<-23073 Statuses=0008 0009 12:35:49 Msec=3000 True Az=112.995 Ze=-166.095 Az status=0008 Ze status=0009 12:35:50 Check angles 12:35:50 SkyScan query 12:35:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 12:35:50 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 12:35:50 Message to Master queued w/err=0: serial=142714 error=0 [UTC 2018-12-14 12:35:52] 12:35:55 Received message from Master: op=Filter serial=142715 12:35:55 Color wheel filter change from 0 to 0 12:35:55 FLIGetFilterPos err=0 currentPosition=0 12:35:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:55 Filter is already there-color wheel unchanged 12:35:55 Received message from Master: op=Shutter serial=142716 12:35:55 Shutter LASER open 12:35:55 Received message from Camera: op=State serial=142718 12:35:55 GetSingleValue result=40 Value=cccccccc 12:35:55 SkyScan query 12:35:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:35:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:56 Parameters OK 12:35:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:56 Set A/D data flow result=40 12:35:56 Set A/D channel type result=40 12:35:56 Set A/D encoding result=40 12:35:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:56 Set channel filter=0.000000e+000 result=40 12:35:56 Config A/D Result=40 12:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:56 Get A/D filter: -9.255963e+061 result=40 12:35:56 Get A/D value=-858993460 result=40 12:35:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:56 Parameters OK 12:35:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:56 Set A/D data flow result=40 12:35:56 Set A/D channel type result=40 12:35:56 Set A/D encoding result=40 12:35:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:56 Set channel filter=0.000000e+000 result=40 12:35:56 Config A/D Result=40 12:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:56 Get A/D filter: -9.255963e+061 result=40 12:35:56 Get A/D value=-858993460 result=40 12:35:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:56 Aux= 12:35:56 Message to Camera, serial 142718 queued 12:36:04 Received message from Master: op=Shutter serial=142728 12:36:04 Shutter LASER close 12:36:05 Received message from Master: op=PointingHead serial=142732 12:36:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:36:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:36:05 Point started: ret=0 12:36:05 point_skyscan result=0 12:36:06 Check angles 12:36:06 SkyScan query 12:36:07 SkyScan query done: ret=0 az=89.82<-5988 ze=157.245<-1517 Statuses=0009 0009 12:36:07 Msec=0 True Az=89.82 Ze=157.245 Az status=0009 Ze status=0009 12:36:07 Check angles 12:36:07 SkyScan query 12:36:07 SkyScan query done: ret=0 az=72.045<-4803 ze=135.855<-2943 Statuses=0009 0009 12:36:07 Msec=750 True Az=72.045 Ze=135.855 Az status=0009 Ze status=0009 12:36:08 Check angles 12:36:08 SkyScan query 12:36:08 SkyScan query done: ret=0 az=54.255<-3617 ze=114.39<-4374 Statuses=0009 0009 12:36:08 Msec=1500 True Az=54.255 Ze=114.39 Az status=0009 Ze status=0009 12:36:08 Check angles 12:36:08 SkyScan query 12:36:09 SkyScan query done: ret=0 az=40.995<-2733 ze=93.48<-5768 Statuses=0009 0009 12:36:09 Msec=2250 True Az=40.995 Ze=93.48 Az status=0009 Ze status=0009 12:36:09 Check angles 12:36:09 SkyScan query 12:36:10 SkyScan query done: ret=0 az=40.98<-2732 ze=72.525<-7165 Statuses=0008 0009 12:36:10 Msec=3000 True Az=40.98 Ze=72.525 Az status=0008 Ze status=0009 12:36:10 Check angles 12:36:10 SkyScan query 12:36:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 12:36:10 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 12:36:11 Check angles 12:36:11 SkyScan query 12:36:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:36:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:36:11 Message to Master queued w/err=0: serial=142732 error=0 12:36:16 Received message from Master: op=Filter serial=142733 12:36:16 Color wheel filter change from 0 to 0 12:36:16 FLIGetFilterPos err=0 currentPosition=0 12:36:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:16 Filter is already there-color wheel unchanged 12:36:16 Received message from Master: op=Shutter serial=142734 12:36:16 Shutter LASER close 12:36:16 Received message from Camera: op=State serial=142736 12:36:16 GetSingleValue result=40 Value=cccccccc 12:36:16 SkyScan query 12:36:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:36:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:17 Parameters OK 12:36:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:17 Set A/D data flow result=40 12:36:17 Set A/D channel type result=40 12:36:17 Set A/D encoding result=40 12:36:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:17 Set channel filter=0.000000e+000 result=40 12:36:17 Config A/D Result=40 12:36:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:17 Get A/D filter: -9.255963e+061 result=40 12:36:17 Get A/D value=-858993460 result=40 12:36:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:17 Parameters OK 12:36:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:17 Set A/D data flow result=40 12:36:17 Set A/D channel type result=40 12:36:17 Set A/D encoding result=40 12:36:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:17 Set channel filter=0.000000e+000 result=40 12:36:17 Config A/D Result=40 12:36:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:17 Get A/D filter: -9.255963e+061 result=40 12:36:17 Get A/D value=-858993460 result=40 12:36:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:17 Aux= 12:36:17 Message to Camera, serial 142736 queued 12:36:54 Received message from Master: op=PointingHead serial=142749 12:36:54 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:36:54 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:36:54 Point started: ret=0 12:36:54 point_skyscan result=0 12:36:55 Check angles 12:36:55 SkyScan query 12:36:56 SkyScan query done: ret=0 az=63.93<-4262 ze=66.555<-7563 Statuses=0009 0008 12:36:56 Msec=0 True Az=63.93 Ze=66.555 Az status=0009 Ze status=0008 12:36:56 Check angles 12:36:56 SkyScan query 12:36:56 SkyScan query done: ret=0 az=81.405<-5427 ze=66.495<-7567 Statuses=0009 0008 12:36:56 Msec=750 True Az=81.405 Ze=66.495 Az status=0009 Ze status=0008 12:36:56 Check angles 12:36:56 SkyScan query 12:36:57 SkyScan query done: ret=0 az=98.895<-6593 ze=66.495<-7567 Statuses=0009 0008 12:36:57 Msec=1500 True Az=98.895 Ze=66.495 Az status=0009 Ze status=0008 12:36:57 Check angles 12:36:57 SkyScan query 12:36:58 SkyScan query done: ret=0 az=116.385<-7759 ze=66.495<-7567 Statuses=0009 0008 12:36:58 Msec=2250 True Az=116.385 Ze=66.495 Az status=0009 Ze status=0008 12:36:58 Check angles 12:36:58 SkyScan query 12:36:59 SkyScan query done: ret=0 az=133.95<-8930 ze=66.495<-7567 Statuses=0009 0008 12:36:59 Msec=3000 True Az=133.95 Ze=66.495 Az status=0009 Ze status=0008 12:36:59 Check angles 12:36:59 SkyScan query 12:36:59 SkyScan query done: ret=0 az=151.29<-10086 ze=66.495<-7567 Statuses=0009 0008 12:36:59 Msec=3750 True Az=151.29 Ze=66.495 Az status=0009 Ze status=0008 12:36:59 Check angles 12:36:59 SkyScan query 12:37:00 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:37:00 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:37:00 Message to Master queued w/err=0: serial=142749 error=0 12:37:05 Received message from Master: op=Filter serial=142750 12:37:05 Color wheel filter change from 0 to 0 12:37:05 FLIGetFilterPos err=0 currentPosition=0 12:37:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:05 Filter is already there-color wheel unchanged 12:37:05 Received message from Master: op=Shutter serial=142751 12:37:05 Shutter LASER close 12:37:05 Received message from Camera: op=State serial=142753 12:37:05 GetSingleValue result=40 Value=cccccccc 12:37:05 SkyScan query 12:37:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:37:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:06 Parameters OK 12:37:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:06 Set A/D data flow result=40 12:37:06 Set A/D channel type result=40 12:37:06 Set A/D encoding result=40 12:37:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:06 Set channel filter=0.000000e+000 result=40 12:37:06 Config A/D Result=40 12:37:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:06 Get A/D filter: -9.255963e+061 result=40 12:37:06 Get A/D value=-858993460 result=40 12:37:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:06 Parameters OK 12:37:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:06 Set A/D data flow result=40 12:37:06 Set A/D channel type result=40 12:37:06 Set A/D encoding result=40 12:37:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:06 Set channel filter=0.000000e+000 result=40 12:37:06 Config A/D Result=40 12:37:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:06 Get A/D filter: -9.255963e+061 result=40 12:37:06 Get A/D value=-858993460 result=40 12:37:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:06 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:06 Aux= 12:37:06 Message to Camera, serial 142753 queued 12:37:43 Received message from Master: op=PointingHead serial=142766 12:37:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:37:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:37:43 Point started: ret=0 12:37:43 point_skyscan result=0 12:37:44 Check angles 12:37:44 SkyScan query 12:37:44 SkyScan query done: ret=0 az=135.12<-9008 ze=36.855<-9543 Statuses=0009 0009 12:37:44 Msec=0 True Az=135.12 Ze=36.855 Az status=0009 Ze status=0009 12:37:44 Check angles 12:37:44 SkyScan query 12:37:45 SkyScan query done: ret=0 az=117.675<-7845 ze=15.93<-10938 Statuses=0009 0009 12:37:45 Msec=750 True Az=117.675 Ze=15.93 Az status=0009 Ze status=0009 12:37:45 Check angles 12:37:45 SkyScan query 12:37:46 SkyScan query done: ret=0 az=100.23<-6682 ze=-5.025<-12335 Statuses=0009 0009 12:37:46 Msec=1500 True Az=100.23 Ze=-5.025 Az status=0009 Ze status=0009 12:37:46 Check angles 12:37:46 SkyScan query 12:37:47 SkyScan query done: ret=0 az=82.74<-5516 ze=-25.98<-13732 Statuses=0009 0009 12:37:47 Msec=2250 True Az=82.74 Ze=-25.98 Az status=0009 Ze status=0009 12:37:47 Check angles 12:37:47 SkyScan query 12:37:47 SkyScan query done: ret=0 az=65.31<-4354 ze=-38.595<-14573 Statuses=0009 0008 12:37:47 Msec=3000 True Az=65.31 Ze=-38.595 Az status=0009 Ze status=0008 12:37:47 Check angles 12:37:47 SkyScan query 12:37:48 SkyScan query done: ret=0 az=47.835<-3189 ze=-38.52<-14568 Statuses=0009 0008 12:37:48 Msec=3750 True Az=47.835 Ze=-38.52 Az status=0009 Ze status=0008 12:37:48 Check angles 12:37:48 SkyScan query 12:37:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:37:49 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:37:49 Message to Master queued w/err=0: serial=142766 error=0 12:37:54 Received message from Master: op=Filter serial=142767 12:37:54 Color wheel filter change from 0 to 0 12:37:54 FLIGetFilterPos err=0 currentPosition=0 12:37:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:54 Filter is already there-color wheel unchanged 12:37:54 Received message from Master: op=Shutter serial=142768 12:37:54 Shutter LASER close 12:37:54 Received message from Camera: op=State serial=142770 12:37:54 GetSingleValue result=40 Value=cccccccc 12:37:54 SkyScan query 12:37:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:37:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:55 Parameters OK 12:37:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:55 Set A/D data flow result=40 12:37:55 Set A/D channel type result=40 12:37:55 Set A/D encoding result=40 12:37:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:55 Set channel filter=0.000000e+000 result=40 12:37:55 Config A/D Result=40 12:37:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:55 Get A/D filter: -9.255963e+061 result=40 12:37:55 Get A/D value=-858993460 result=40 12:37:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:55 Parameters OK 12:37:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:55 Set A/D data flow result=40 12:37:55 Set A/D channel type result=40 12:37:55 Set A/D encoding result=40 12:37:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:55 Set channel filter=0.000000e+000 result=40 12:37:55 Config A/D Result=40 12:37:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:55 Get A/D filter: -9.255963e+061 result=40 12:37:55 Get A/D value=-858993460 result=40 12:37:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:55 Aux= 12:37:55 Message to Camera, serial 142770 queued 12:38:31 Received message from Master: op=PointingHead serial=142783 12:38:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:38:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:38:32 Point started: ret=0 12:38:32 point_skyscan result=0 12:38:33 Check angles 12:38:33 SkyScan query 12:38:33 SkyScan query done: ret=0 az=64.11<-4274 ze=-68.565<-16571 Statuses=0009 0009 12:38:33 Msec=0 True Az=64.11 Ze=-68.565 Az status=0009 Ze status=0009 12:38:33 Check angles 12:38:33 SkyScan query 12:38:34 SkyScan query done: ret=0 az=81.63<-5442 ze=-89.535<-17969 Statuses=0009 0009 12:38:34 Msec=750 True Az=81.63 Ze=-89.535 Az status=0009 Ze status=0009 12:38:34 Check angles 12:38:34 SkyScan query 12:38:35 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.49<-19366 Statuses=0009 0009 12:38:35 Msec=1500 True Az=99.06 Ze=-110.49 Az status=0009 Ze status=0009 12:38:35 Check angles 12:38:35 SkyScan query 12:38:35 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.4<-20760 Statuses=0009 0009 12:38:35 Msec=2250 True Az=116.625 Ze=-131.4 Az status=0009 Ze status=0009 12:38:36 Check angles 12:38:36 SkyScan query 12:38:36 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 12:38:36 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 12:38:36 Check angles 12:38:36 SkyScan query 12:38:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 12:38:37 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 12:38:37 Message to Master queued w/err=0: serial=142783 error=0 12:38:42 Received message from Master: op=Filter serial=142784 12:38:42 Color wheel filter change from 0 to 0 12:38:42 FLIGetFilterPos err=0 currentPosition=0 12:38:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:42 Filter is already there-color wheel unchanged 12:38:42 Received message from Master: op=Shutter serial=142785 12:38:42 Shutter LASER close 12:38:42 Received message from Camera: op=State serial=142787 12:38:42 GetSingleValue result=40 Value=cccccccc 12:38:42 SkyScan query 12:38:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:38:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:43 Parameters OK 12:38:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:43 Set A/D data flow result=40 12:38:43 Set A/D channel type result=40 12:38:43 Set A/D encoding result=40 12:38:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:43 Set channel filter=0.000000e+000 result=40 12:38:43 Config A/D Result=40 12:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:43 Get A/D filter: -9.255963e+061 result=40 12:38:43 Get A/D value=-858993460 result=40 12:38:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:43 Parameters OK 12:38:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:43 Set A/D data flow result=40 12:38:43 Set A/D channel type result=40 12:38:43 Set A/D encoding result=40 12:38:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:43 Set channel filter=0.000000e+000 result=40 12:38:43 Config A/D Result=40 12:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:43 Get A/D filter: -9.255963e+061 result=40 12:38:43 Get A/D value=-858993460 result=40 12:38:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:43 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:43 Aux= 12:38:43 Message to Camera, serial 142787 queued 12:39:20 Received message from Master: op=PointingHead serial=142800 12:39:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:39:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:39:20 Point started: ret=0 12:39:20 point_skyscan result=0 12:39:21 Check angles 12:39:21 SkyScan query 12:39:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.375<-23425 Statuses=0009 0009 12:39:21 Msec=0 True Az=112.995 Ze=-171.375 Az status=0009 Ze status=0009 12:39:21 Check angles 12:39:21 SkyScan query 12:39:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:39:22 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:39:22 Message to Master queued w/err=0: serial=142800 error=0 12:39:27 Received message from Master: op=Filter serial=142801 12:39:27 Color wheel filter change from 0 to 0 12:39:27 FLIGetFilterPos err=0 currentPosition=0 12:39:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:27 Filter is already there-color wheel unchanged 12:39:27 Received message from Master: op=Shutter serial=142802 12:39:27 Shutter LASER open 12:39:27 Received message from Camera: op=State serial=142804 12:39:27 GetSingleValue result=40 Value=cccccccc 12:39:27 SkyScan query 12:39:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:39:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:28 Parameters OK 12:39:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:28 Set A/D data flow result=40 12:39:28 Set A/D channel type result=40 12:39:28 Set A/D encoding result=40 12:39:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:28 Set channel filter=0.000000e+000 result=40 12:39:28 Config A/D Result=40 12:39:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:28 Get A/D filter: -9.255963e+061 result=40 12:39:28 Get A/D value=-858993460 result=40 12:39:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:28 Parameters OK 12:39:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:28 Set A/D data flow result=40 12:39:28 Set A/D channel type result=40 12:39:28 Set A/D encoding result=40 12:39:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:28 Set channel filter=0.000000e+000 result=40 12:39:28 Config A/D Result=40 12:39:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:28 Get A/D filter: -9.255963e+061 result=40 12:39:28 Get A/D value=-858993460 result=40 12:39:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:28 Aux= 12:39:28 Message to Camera, serial 142804 queued 12:39:36 Received message from Master: op=Shutter serial=142814 12:39:36 Shutter LASER close 12:39:37 Received message from Master: op=PointingHead serial=142818 12:39:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:39:37 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:39:37 Point started: ret=0 12:39:37 point_skyscan result=0 12:39:38 Check angles 12:39:38 SkyScan query 12:39:39 SkyScan query done: ret=0 az=135.855<-9057 ze=-143.355<-21557 Statuses=0009 0009 12:39:39 Msec=0 True Az=135.855 Ze=-143.355 Az status=0009 Ze status=0009 12:39:39 Check angles 12:39:39 SkyScan query 12:39:39 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.355<-20157 Statuses=0009 0009 12:39:39 Msec=750 True Az=153.39 Ze=-122.355 Az status=0009 Ze status=0009 12:39:40 Check angles 12:39:40 SkyScan query 12:39:40 SkyScan query done: ret=0 az=170.895<-11393 ze=-101.445<-18763 Statuses=0009 0009 12:39:40 Msec=1500 True Az=170.895 Ze=-101.445 Az status=0009 Ze status=0009 12:39:40 Check angles 12:39:40 SkyScan query 12:39:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.475<-17365 Statuses=0008 0009 12:39:41 Msec=2250 True Az=176.01 Ze=-80.475 Az status=0008 Ze status=0009 12:39:41 Check angles 12:39:41 SkyScan query 12:39:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.52<-15968 Statuses=0008 0009 12:39:42 Msec=3000 True Az=176.01 Ze=-59.52 Az status=0008 Ze status=0009 12:39:42 Check angles 12:39:42 SkyScan query 12:39:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 12:39:42 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 12:39:42 Message to Master queued w/err=0: serial=142818 error=0 12:39:47 Received message from Master: op=Filter serial=142819 12:39:47 Color wheel filter change from 0 to 0 12:39:47 FLIGetFilterPos err=0 currentPosition=0 12:39:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:47 Filter is already there-color wheel unchanged 12:39:48 Received message from Master: op=Shutter serial=142820 12:39:48 Shutter LASER close 12:39:48 Received message from Camera: op=State serial=142822 12:39:48 GetSingleValue result=40 Value=cccccccc 12:39:48 SkyScan query 12:39:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:39:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:48 Parameters OK 12:39:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:48 Set A/D data flow result=40 12:39:48 Set A/D channel type result=40 12:39:48 Set A/D encoding result=40 12:39:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:48 Set channel filter=0.000000e+000 result=40 12:39:48 Config A/D Result=40 12:39:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:48 Get A/D filter: -9.255963e+061 result=40 12:39:48 Get A/D value=-858993460 result=40 12:39:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:48 Parameters OK 12:39:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:48 Set A/D data flow result=40 12:39:48 Set A/D channel type result=40 12:39:48 Set A/D encoding result=40 12:39:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:48 Set channel filter=0.000000e+000 result=40 12:39:48 Config A/D Result=40 12:39:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:48 Get A/D filter: -9.255963e+061 result=40 12:39:48 Get A/D value=-858993460 result=40 12:39:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:48 Aux= 12:39:48 Message to Camera, serial 142822 queued 12:40:24 Received message from Master: op=PointingHead serial=142834 12:40:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:40:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:40:25 Point started: ret=0 12:40:25 point_skyscan result=0 12:40:25 Check angles 12:40:25 SkyScan query 12:40:26 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.36<-13424 Statuses=0009 0009 12:40:26 Msec=0 True Az=152.73 Ze=-21.36 Az status=0009 Ze status=0009 12:40:26 Check angles 12:40:26 SkyScan query 12:40:27 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.405<-12027 Statuses=0009 0009 12:40:27 Msec=750 True Az=135.15 Ze=-0.405 Az status=0009 Ze status=0009 12:40:27 Check angles 12:40:27 SkyScan query 12:40:27 SkyScan query done: ret=0 az=117.615<-7841 ze=20.565<-10629 Statuses=0009 0009 12:40:27 Msec=1500 True Az=117.615 Ze=20.565 Az status=0009 Ze status=0009 12:40:28 Check angles 12:40:28 SkyScan query 12:40:28 SkyScan query done: ret=0 az=100.35<-6690 ze=41.52<-9232 Statuses=0009 0009 12:40:28 Msec=2250 True Az=100.35 Ze=41.52 Az status=0009 Ze status=0009 12:40:28 Check angles 12:40:28 SkyScan query 12:40:29 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 12:40:29 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 12:40:29 Check angles 12:40:29 SkyScan query 12:40:30 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 12:40:30 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 12:40:30 Message to Master queued w/err=0: serial=142834 error=0 12:40:35 Received message from Master: op=Filter serial=142835 12:40:35 Color wheel filter change from 0 to 0 12:40:35 FLIGetFilterPos err=0 currentPosition=0 12:40:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:35 Filter is already there-color wheel unchanged 12:40:35 Received message from Master: op=Shutter serial=142836 12:40:35 Shutter LASER close 12:40:35 Received message from Camera: op=State serial=142838 12:40:35 GetSingleValue result=40 Value=cccccccc 12:40:35 SkyScan query 12:40:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:40:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:35 Parameters OK 12:40:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:35 Set A/D data flow result=40 12:40:35 Set A/D channel type result=40 12:40:35 Set A/D encoding result=40 12:40:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:35 Set channel filter=0.000000e+000 result=40 12:40:35 Config A/D Result=40 12:40:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:35 Get A/D filter: -9.255963e+061 result=40 12:40:35 Get A/D value=-858993460 result=40 12:40:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:35 Parameters OK 12:40:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:35 Set A/D data flow result=40 12:40:35 Set A/D channel type result=40 12:40:35 Set A/D encoding result=40 12:40:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:35 Set channel filter=0.000000e+000 result=40 12:40:35 Config A/D Result=40 12:40:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:35 Get A/D filter: -9.255963e+061 result=40 12:40:35 Get A/D value=-858993460 result=40 12:40:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:35 Aux= 12:40:35 Message to Camera, serial 142838 queued 12:41:12 Received message from Master: op=PointingHead serial=142851 12:41:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:41:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:41:13 Point started: ret=0 12:41:13 point_skyscan result=0 12:41:13 Check angles 12:41:13 SkyScan query 12:41:14 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 12:41:14 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 12:41:14 Check angles 12:41:14 SkyScan query 12:41:15 SkyScan query done: ret=0 az=126.975<-8465 ze=38.505<-9433 Statuses=0009 0008 12:41:15 Msec=750 True Az=126.975 Ze=38.505 Az status=0009 Ze status=0008 12:41:15 Check angles 12:41:15 SkyScan query 12:41:16 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 12:41:16 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 12:41:16 Check angles 12:41:16 SkyScan query 12:41:16 SkyScan query done: ret=0 az=162.045<-10803 ze=38.505<-9433 Statuses=0009 0008 12:41:16 Msec=2250 True Az=162.045 Ze=38.505 Az status=0009 Ze status=0008 12:41:16 Check angles 12:41:16 SkyScan query 12:41:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:41:17 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:41:17 Check angles 12:41:17 SkyScan query 12:41:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:41:18 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:41:18 Message to Master queued w/err=0: serial=142851 error=0 12:41:23 Received message from Master: op=Filter serial=142852 12:41:23 Color wheel filter change from 0 to 0 12:41:23 FLIGetFilterPos err=0 currentPosition=0 12:41:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:23 Filter is already there-color wheel unchanged 12:41:23 Received message from Master: op=Shutter serial=142853 12:41:23 Shutter LASER close 12:41:23 Received message from Camera: op=State serial=142855 12:41:23 GetSingleValue result=40 Value=cccccccc 12:41:23 SkyScan query 12:41:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:41:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:24 Parameters OK 12:41:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:24 Set A/D data flow result=40 12:41:24 Set A/D channel type result=40 12:41:24 Set A/D encoding result=40 12:41:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:24 Set channel filter=0.000000e+000 result=40 12:41:24 Config A/D Result=40 12:41:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:24 Get A/D filter: -9.255963e+061 result=40 12:41:24 Get A/D value=-858993460 result=40 12:41:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:24 Parameters OK 12:41:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:24 Set A/D data flow result=40 12:41:24 Set A/D channel type result=40 12:41:24 Set A/D encoding result=40 12:41:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:24 Set channel filter=0.000000e+000 result=40 12:41:24 Config A/D Result=40 12:41:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:24 Get A/D filter: -9.255963e+061 result=40 12:41:24 Get A/D value=-858993460 result=40 12:41:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:24 Aux= 12:41:24 Message to Camera, serial 142855 queued 12:42:00 Received message from Master: op=PointingHead serial=142868 12:42:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:42:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:42:01 Point started: ret=0 12:42:01 point_skyscan result=0 12:42:02 Check angles 12:42:02 SkyScan query 12:42:02 SkyScan query done: ret=0 az=152.745<-10183 ze=8.25<-11450 Statuses=0009 0009 12:42:02 Msec=0 True Az=152.745 Ze=8.25 Az status=0009 Ze status=0009 12:42:02 Check angles 12:42:02 SkyScan query 12:42:03 SkyScan query done: ret=0 az=135.21<-9014 ze=-12.615<-12841 Statuses=0009 0009 12:42:03 Msec=750 True Az=135.21 Ze=-12.615 Az status=0009 Ze status=0009 12:42:03 Check angles 12:42:03 SkyScan query 12:42:04 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.63<-14242 Statuses=0009 0009 12:42:04 Msec=1500 True Az=117.75 Ze=-33.63 Az status=0009 Ze status=0009 12:42:04 Check angles 12:42:04 SkyScan query 12:42:04 SkyScan query done: ret=0 az=100.26<-6684 ze=-51.555<-15437 Statuses=0009 0009 12:42:04 Msec=2250 True Az=100.26 Ze=-51.555 Az status=0009 Ze status=0009 12:42:05 Check angles 12:42:05 SkyScan query 12:42:05 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 12:42:05 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 12:42:05 Check angles 12:42:05 SkyScan query 12:42:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:42:06 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:42:06 Message to Master queued w/err=0: serial=142868 error=0 12:42:11 Received message from Master: op=Filter serial=142869 12:42:11 Color wheel filter change from 0 to 0 12:42:11 FLIGetFilterPos err=0 currentPosition=0 12:42:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:11 Filter is already there-color wheel unchanged 12:42:11 Received message from Master: op=Shutter serial=142870 12:42:11 Shutter LASER close 12:42:11 Received message from Camera: op=State serial=142872 12:42:11 GetSingleValue result=40 Value=cccccccc 12:42:11 SkyScan query 12:42:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:42:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:12 Parameters OK 12:42:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:12 Set A/D data flow result=40 12:42:12 Set A/D channel type result=40 12:42:12 Set A/D encoding result=40 12:42:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:12 Set channel filter=0.000000e+000 result=40 12:42:12 Config A/D Result=40 12:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:12 Get A/D filter: -9.255963e+061 result=40 12:42:12 Get A/D value=-858993460 result=40 12:42:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:12 Parameters OK 12:42:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:12 Set A/D data flow result=40 12:42:12 Set A/D channel type result=40 12:42:12 Set A/D encoding result=40 12:42:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:12 Set channel filter=0.000000e+000 result=40 12:42:12 Config A/D Result=40 12:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:12 Get A/D filter: -9.255963e+061 result=40 12:42:12 Get A/D value=-858993460 result=40 12:42:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:12 Aux= 12:42:12 Message to Camera, serial 142872 queued 12:42:48 Received message from Master: op=PointingHead serial=142885 12:42:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:42:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:42:49 Point started: ret=0 12:42:49 point_skyscan result=0 12:42:50 Check angles 12:42:50 SkyScan query 12:42:50 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.765<-17451 Statuses=0009 0009 12:42:50 Msec=0 True Az=109.365 Ze=-81.765 Az status=0009 Ze status=0009 12:42:50 Check angles 12:42:50 SkyScan query 12:42:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.11<-18874 Statuses=0008 0009 12:42:51 Msec=750 True Az=112.995 Ze=-103.11 Az status=0008 Ze status=0009 12:42:51 Check angles 12:42:51 SkyScan query 12:42:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.185<-20279 Statuses=0008 0009 12:42:52 Msec=1500 True Az=112.995 Ze=-124.185 Az status=0008 Ze status=0009 12:42:52 Check angles 12:42:52 SkyScan query 12:42:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 12:42:52 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 12:42:53 Check angles 12:42:53 SkyScan query 12:42:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.425<-23095 Statuses=0008 0009 12:42:53 Msec=3000 True Az=112.995 Ze=-166.425 Az status=0008 Ze status=0009 12:42:53 Check angles 12:42:53 SkyScan query 12:42:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 12:42:54 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 12:42:54 Message to Master queued w/err=0: serial=142885 error=0 12:42:59 Received message from Master: op=Filter serial=142886 12:42:59 Color wheel filter change from 0 to 0 12:42:59 FLIGetFilterPos err=0 currentPosition=0 12:42:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:59 Filter is already there-color wheel unchanged 12:42:59 Received message from Master: op=Shutter serial=142887 12:42:59 Shutter LASER open 12:42:59 Received message from Camera: op=State serial=142889 12:42:59 GetSingleValue result=40 Value=cccccccc 12:42:59 SkyScan query 12:43:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:43:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:00 Parameters OK 12:43:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:00 Set A/D data flow result=40 12:43:00 Set A/D channel type result=40 12:43:00 Set A/D encoding result=40 12:43:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:00 Set channel filter=0.000000e+000 result=40 12:43:00 Config A/D Result=40 12:43:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:00 Get A/D filter: -9.255963e+061 result=40 12:43:00 Get A/D value=-858993460 result=40 12:43:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:00 Parameters OK 12:43:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:00 Set A/D data flow result=40 12:43:00 Set A/D channel type result=40 12:43:00 Set A/D encoding result=40 12:43:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:00 Set channel filter=0.000000e+000 result=40 12:43:00 Config A/D Result=40 12:43:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:00 Get A/D filter: -9.255963e+061 result=40 12:43:00 Get A/D value=-858993460 result=40 12:43:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:00 Aux= 12:43:00 Message to Camera, serial 142889 queued 12:43:08 Received message from Master: op=Shutter serial=142899 12:43:08 Shutter LASER close 12:43:09 Received message from Master: op=PointingHead serial=142903 12:43:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:43:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:43:09 Point started: ret=0 12:43:09 point_skyscan result=0 12:43:10 Check angles 12:43:10 SkyScan query 12:43:10 SkyScan query done: ret=0 az=90.135<-6009 ze=157.485<-1501 Statuses=0009 0009 12:43:10 Msec=0 True Az=90.135 Ze=157.485 Az status=0009 Ze status=0009 12:43:11 Check angles 12:43:11 SkyScan query 12:43:11 SkyScan query done: ret=0 az=72.285<-4819 ze=136.095<-2927 Statuses=0009 0009 12:43:11 Msec=750 True Az=72.285 Ze=136.095 Az status=0009 Ze status=0009 12:43:11 Check angles 12:43:11 SkyScan query 12:43:12 SkyScan query done: ret=0 az=54.48<-3632 ze=114.645<-4357 Statuses=0009 0009 12:43:12 Msec=1500 True Az=54.48 Ze=114.645 Az status=0009 Ze status=0009 12:43:12 Check angles 12:43:12 SkyScan query 12:43:13 SkyScan query done: ret=0 az=40.98<-2732 ze=93.735<-5751 Statuses=0009 0009 12:43:13 Msec=2250 True Az=40.98 Ze=93.735 Az status=0009 Ze status=0009 12:43:13 Check angles 12:43:13 SkyScan query 12:43:13 SkyScan query done: ret=0 az=40.995<-2733 ze=72.735<-7151 Statuses=0008 0009 12:43:13 Msec=3000 True Az=40.995 Ze=72.735 Az status=0008 Ze status=0009 12:43:14 Check angles 12:43:14 SkyScan query 12:43:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.2<-8520 Statuses=0008 0009 12:43:14 Msec=3750 True Az=40.995 Ze=52.2 Az status=0008 Ze status=0009 12:43:14 Check angles 12:43:14 SkyScan query 12:43:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:43:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:43:15 Message to Master queued w/err=0: serial=142903 error=0 12:43:20 Received message from Master: op=Filter serial=142904 12:43:20 Color wheel filter change from 0 to 0 12:43:20 FLIGetFilterPos err=0 currentPosition=0 12:43:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:20 Filter is already there-color wheel unchanged 12:43:20 Received message from Master: op=Shutter serial=142905 12:43:20 Shutter LASER close 12:43:20 Received message from Camera: op=State serial=142907 12:43:20 GetSingleValue result=40 Value=cccccccc 12:43:20 SkyScan query 12:43:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:43:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:21 Parameters OK 12:43:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:21 Set A/D data flow result=40 12:43:21 Set A/D channel type result=40 12:43:21 Set A/D encoding result=40 12:43:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:21 Set channel filter=0.000000e+000 result=40 12:43:21 Config A/D Result=40 12:43:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:21 Get A/D filter: -9.255963e+061 result=40 12:43:21 Get A/D value=-858993460 result=40 12:43:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:21 Parameters OK 12:43:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:21 Set A/D data flow result=40 12:43:21 Set A/D channel type result=40 12:43:21 Set A/D encoding result=40 12:43:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:21 Set channel filter=0.000000e+000 result=40 12:43:21 Config A/D Result=40 12:43:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:21 Get A/D filter: -9.255963e+061 result=40 12:43:21 Get A/D value=-858993460 result=40 12:43:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:21 Aux= 12:43:21 Message to Camera, serial 142907 queued 12:43:58 Received message from Master: op=PointingHead serial=142920 12:43:58 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:43:58 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:43:58 Point started: ret=0 12:43:58 point_skyscan result=0 12:43:59 Check angles 12:43:59 SkyScan query 12:43:59 SkyScan query done: ret=0 az=64.35<-4290 ze=66.54<-7564 Statuses=0009 0008 12:43:59 Msec=0 True Az=64.35 Ze=66.54 Az status=0009 Ze status=0008 12:44:00 Check angles 12:44:00 SkyScan query 12:44:00 SkyScan query done: ret=0 az=81.885<-5459 ze=66.51<-7566 Statuses=0009 0008 12:44:00 Msec=750 True Az=81.885 Ze=66.51 Az status=0009 Ze status=0008 12:44:00 Check angles 12:44:00 SkyScan query 12:44:01 SkyScan query done: ret=0 az=99.645<-6643 ze=66.495<-7567 Statuses=0009 0008 12:44:01 Msec=1500 True Az=99.645 Ze=66.495 Az status=0009 Ze status=0008 12:44:01 Check angles 12:44:01 SkyScan query 12:44:02 SkyScan query done: ret=0 az=117.255<-7817 ze=66.495<-7567 Statuses=0009 0008 12:44:02 Msec=2250 True Az=117.255 Ze=66.495 Az status=0009 Ze status=0008 12:44:02 Check angles 12:44:02 SkyScan query 12:44:02 SkyScan query done: ret=0 az=134.76<-8984 ze=66.495<-7567 Statuses=0009 0008 12:44:02 Msec=3000 True Az=134.76 Ze=66.495 Az status=0009 Ze status=0008 12:44:03 Check angles 12:44:03 SkyScan query 12:44:03 SkyScan query done: ret=0 az=152.46<-10164 ze=66.495<-7567 Statuses=0009 0008 12:44:03 Msec=3750 True Az=152.46 Ze=66.495 Az status=0009 Ze status=0008 12:44:03 Check angles 12:44:03 SkyScan query 12:44:04 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:44:04 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:44:04 Message to Master queued w/err=0: serial=142920 error=0 12:44:09 Received message from Master: op=Filter serial=142921 12:44:09 Color wheel filter change from 0 to 0 12:44:09 FLIGetFilterPos err=0 currentPosition=0 12:44:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:09 Filter is already there-color wheel unchanged 12:44:09 Received message from Master: op=Shutter serial=142922 12:44:09 Shutter LASER close 12:44:09 Received message from Camera: op=State serial=142924 12:44:09 GetSingleValue result=40 Value=cccccccc 12:44:09 SkyScan query 12:44:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:44:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:10 Parameters OK 12:44:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:10 Set A/D data flow result=40 12:44:10 Set A/D channel type result=40 12:44:10 Set A/D encoding result=40 12:44:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:10 Set channel filter=0.000000e+000 result=40 12:44:10 Config A/D Result=40 12:44:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:10 Get A/D filter: -9.255963e+061 result=40 12:44:10 Get A/D value=-858993460 result=40 12:44:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:10 Parameters OK 12:44:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:10 Set A/D data flow result=40 12:44:10 Set A/D channel type result=40 12:44:10 Set A/D encoding result=40 12:44:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:10 Set channel filter=0.000000e+000 result=40 12:44:10 Config A/D Result=40 12:44:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:10 Get A/D filter: -9.255963e+061 result=40 12:44:10 Get A/D value=-858993460 result=40 12:44:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:10 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:10 Aux= 12:44:10 Message to Camera, serial 142924 queued 12:44:47 Received message from Master: op=PointingHead serial=142937 12:44:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:44:47 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:44:47 Point started: ret=0 12:44:47 point_skyscan result=0 12:44:48 Check angles 12:44:48 SkyScan query 12:44:48 SkyScan query done: ret=0 az=135.105<-9007 ze=36.87<-9542 Statuses=0009 0009 12:44:48 Msec=0 True Az=135.105 Ze=36.87 Az status=0009 Ze status=0009 12:44:48 Check angles 12:44:48 SkyScan query 12:44:49 SkyScan query done: ret=0 az=117.645<-7843 ze=15.945<-10937 Statuses=0009 0009 12:44:49 Msec=750 True Az=117.645 Ze=15.945 Az status=0009 Ze status=0009 12:44:49 Check angles 12:44:49 SkyScan query 12:44:50 SkyScan query done: ret=0 az=100.275<-6685 ze=-4.995<-12333 Statuses=0009 0009 12:44:50 Msec=1500 True Az=100.275 Ze=-4.995 Az status=0009 Ze status=0009 12:44:50 Check angles 12:44:50 SkyScan query 12:44:51 SkyScan query done: ret=0 az=82.755<-5517 ze=-25.995<-13733 Statuses=0009 0009 12:44:51 Msec=2250 True Az=82.755 Ze=-25.995 Az status=0009 Ze status=0009 12:44:51 Check angles 12:44:51 SkyScan query 12:44:51 SkyScan query done: ret=0 az=65.31<-4354 ze=-38.58<-14572 Statuses=0009 0008 12:44:51 Msec=3000 True Az=65.31 Ze=-38.58 Az status=0009 Ze status=0008 12:44:51 Check angles 12:44:51 SkyScan query 12:44:52 SkyScan query done: ret=0 az=47.79<-3186 ze=-38.52<-14568 Statuses=0009 0008 12:44:52 Msec=3750 True Az=47.79 Ze=-38.52 Az status=0009 Ze status=0008 12:44:52 Check angles 12:44:52 SkyScan query 12:44:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:44:53 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:44:53 Message to Master queued w/err=0: serial=142937 error=0 12:44:58 Received message from Master: op=Filter serial=142938 12:44:58 Color wheel filter change from 0 to 0 12:44:58 FLIGetFilterPos err=0 currentPosition=0 12:44:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:58 Filter is already there-color wheel unchanged 12:44:58 Received message from Master: op=Shutter serial=142939 12:44:58 Shutter LASER close 12:44:58 Received message from Camera: op=State serial=142941 12:44:58 GetSingleValue result=40 Value=cccccccc 12:44:58 SkyScan query 12:44:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:44:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:59 Parameters OK 12:44:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:59 Set A/D data flow result=40 12:44:59 Set A/D channel type result=40 12:44:59 Set A/D encoding result=40 12:44:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:59 Set channel filter=0.000000e+000 result=40 12:44:59 Config A/D Result=40 12:44:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:59 Get A/D filter: -9.255963e+061 result=40 12:44:59 Get A/D value=-858993460 result=40 12:44:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:59 Parameters OK 12:44:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:59 Set A/D data flow result=40 12:44:59 Set A/D channel type result=40 12:44:59 Set A/D encoding result=40 12:44:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:59 Set channel filter=0.000000e+000 result=40 12:44:59 Config A/D Result=40 12:44:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:59 Get A/D filter: -9.255963e+061 result=40 12:44:59 Get A/D value=-858993460 result=40 12:44:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:59 Aux= 12:44:59 Message to Camera, serial 142941 queued 12:45:27 Received message from Master: op=Identify serial=142942 12:45:34 Received message from Master: op=PointingHead serial=142956 12:45:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:45:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:45:35 Point started: ret=0 12:45:35 point_skyscan result=0 12:45:36 Check angles 12:45:36 SkyScan query 12:45:36 SkyScan query done: ret=0 az=64.305<-4287 ze=-68.745<-16583 Statuses=0009 0009 12:45:36 Msec=0 True Az=64.305 Ze=-68.745 Az status=0009 Ze status=0009 12:45:36 Check angles 12:45:36 SkyScan query 12:45:37 SkyScan query done: ret=0 az=82.23<-5482 ze=-90.09<-18006 Statuses=0009 0009 12:45:37 Msec=750 True Az=82.23 Ze=-90.09 Az status=0009 Ze status=0009 12:45:37 Check angles 12:45:37 SkyScan query 12:45:38 SkyScan query done: ret=0 az=99.615<-6641 ze=-111.15<-19410 Statuses=0009 0009 12:45:38 Msec=1500 True Az=99.615 Ze=-111.15 Az status=0009 Ze status=0009 12:45:38 Check angles 12:45:38 SkyScan query 12:45:38 SkyScan query done: ret=0 az=117.12<-7808 ze=-131.985<-20799 Statuses=0009 0009 [UTC 2018-12-14 12:45:38] 12:45:38 Msec=2250 True Az=117.12 Ze=-131.985 Az status=0009 Ze status=0009 12:45:39 Check angles 12:45:39 SkyScan query 12:45:39 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 12:45:39 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 12:45:39 Check angles 12:45:39 SkyScan query 12:45:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 12:45:40 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 12:45:40 Message to Master queued w/err=0: serial=142956 error=0 12:45:45 Received message from Master: op=Filter serial=142957 12:45:45 Color wheel filter change from 0 to 0 12:45:45 FLIGetFilterPos err=0 currentPosition=0 12:45:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:45 Filter is already there-color wheel unchanged 12:45:45 Received message from Master: op=Shutter serial=142958 12:45:45 Shutter LASER close 12:45:45 Received message from Camera: op=State serial=142960 12:45:45 GetSingleValue result=40 Value=cccccccc 12:45:45 SkyScan query 12:45:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:45:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:46 Parameters OK 12:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:46 Set A/D data flow result=40 12:45:46 Set A/D channel type result=40 12:45:46 Set A/D encoding result=40 12:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:46 Set channel filter=0.000000e+000 result=40 12:45:46 Config A/D Result=40 12:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:46 Get A/D filter: -9.255963e+061 result=40 12:45:46 Get A/D value=-858993460 result=40 12:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:46 Parameters OK 12:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:46 Set A/D data flow result=40 12:45:46 Set A/D channel type result=40 12:45:46 Set A/D encoding result=40 12:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:46 Set channel filter=0.000000e+000 result=40 12:45:46 Config A/D Result=40 12:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:46 Get A/D filter: -9.255963e+061 result=40 12:45:46 Get A/D value=-858993460 result=40 12:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:46 Aux= 12:45:46 Message to Camera, serial 142960 queued 12:46:23 Received message from Master: op=PointingHead serial=142973 12:46:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:46:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:46:23 Point started: ret=0 12:46:23 point_skyscan result=0 12:46:24 Check angles 12:46:24 SkyScan query 12:46:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0009 0009 12:46:24 Msec=0 True Az=112.995 Ze=-171.18 Az status=0009 Ze status=0009 12:46:24 Check angles 12:46:24 SkyScan query 12:46:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:46:25 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:46:25 Message to Master queued w/err=0: serial=142973 error=0 12:46:30 Received message from Master: op=Filter serial=142974 12:46:30 Color wheel filter change from 0 to 0 12:46:30 FLIGetFilterPos err=0 currentPosition=0 12:46:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:30 Filter is already there-color wheel unchanged 12:46:30 Received message from Master: op=Shutter serial=142975 12:46:30 Shutter LASER open 12:46:30 Received message from Camera: op=State serial=142977 12:46:30 GetSingleValue result=40 Value=cccccccc 12:46:30 SkyScan query 12:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:46:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:31 Parameters OK 12:46:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:31 Set A/D data flow result=40 12:46:31 Set A/D channel type result=40 12:46:31 Set A/D encoding result=40 12:46:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:31 Set channel filter=0.000000e+000 result=40 12:46:31 Config A/D Result=40 12:46:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:31 Get A/D filter: -9.255963e+061 result=40 12:46:31 Get A/D value=-858993460 result=40 12:46:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:31 Parameters OK 12:46:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:31 Set A/D data flow result=40 12:46:31 Set A/D channel type result=40 12:46:31 Set A/D encoding result=40 12:46:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:31 Set channel filter=0.000000e+000 result=40 12:46:31 Config A/D Result=40 12:46:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:31 Get A/D filter: -9.255963e+061 result=40 12:46:31 Get A/D value=-858993460 result=40 12:46:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:31 Aux= 12:46:31 Message to Camera, serial 142977 queued 12:46:39 Received message from Master: op=Shutter serial=142987 12:46:39 Shutter LASER close 12:46:40 Received message from Master: op=PointingHead serial=142991 12:46:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:46:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:46:40 Point started: ret=0 12:46:40 point_skyscan result=0 12:46:41 Check angles 12:46:41 SkyScan query 12:46:42 SkyScan query done: ret=0 az=136.47<-9098 ze=-142.68<-21512 Statuses=0009 0009 12:46:42 Msec=0 True Az=136.47 Ze=-142.68 Az status=0009 Ze status=0009 12:46:42 Check angles 12:46:42 SkyScan query 12:46:42 SkyScan query done: ret=0 az=153.84<-10256 ze=-121.845<-20123 Statuses=0009 0009 12:46:42 Msec=750 True Az=153.84 Ze=-121.845 Az status=0009 Ze status=0009 12:46:43 Check angles 12:46:43 SkyScan query 12:46:43 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.815<-18721 Statuses=0009 0009 12:46:43 Msec=1500 True Az=171.435 Ze=-100.815 Az status=0009 Ze status=0009 12:46:43 Check angles 12:46:43 SkyScan query 12:46:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.935<-17329 Statuses=0008 0009 12:46:44 Msec=2250 True Az=176.01 Ze=-79.935 Az status=0008 Ze status=0009 12:46:44 Check angles 12:46:44 SkyScan query 12:46:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.965<-15931 Statuses=0008 0009 12:46:45 Msec=3000 True Az=176.01 Ze=-58.965 Az status=0008 Ze status=0009 12:46:45 Check angles 12:46:45 SkyScan query 12:46:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:46:45 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:46:45 Message to Master queued w/err=0: serial=142991 error=0 12:46:50 Received message from Master: op=Filter serial=142992 12:46:50 Color wheel filter change from 0 to 0 12:46:50 FLIGetFilterPos err=0 currentPosition=0 12:46:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:50 Filter is already there-color wheel unchanged 12:46:51 Received message from Master: op=Shutter serial=142993 12:46:51 Shutter LASER close 12:46:51 Received message from Camera: op=State serial=142995 12:46:51 GetSingleValue result=40 Value=cccccccc 12:46:51 SkyScan query 12:46:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:46:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:51 Parameters OK 12:46:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:51 Set A/D data flow result=40 12:46:51 Set A/D channel type result=40 12:46:51 Set A/D encoding result=40 12:46:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:51 Set channel filter=0.000000e+000 result=40 12:46:51 Config A/D Result=40 12:46:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:51 Get A/D filter: -9.255963e+061 result=40 12:46:51 Get A/D value=-858993460 result=40 12:46:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:51 Parameters OK 12:46:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:51 Set A/D data flow result=40 12:46:51 Set A/D channel type result=40 12:46:51 Set A/D encoding result=40 12:46:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:51 Set channel filter=0.000000e+000 result=40 12:46:51 Config A/D Result=40 12:46:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:51 Get A/D filter: -9.255963e+061 result=40 12:46:51 Get A/D value=-858993460 result=40 12:46:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:51 Aux= 12:46:51 Message to Camera, serial 142995 queued 12:47:28 Received message from Master: op=PointingHead serial=143008 12:47:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:47:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:47:29 Point started: ret=0 12:47:29 point_skyscan result=0 12:47:29 Check angles 12:47:29 SkyScan query 12:47:30 SkyScan query done: ret=0 az=152.52<-10168 ze=-21.15<-13410 Statuses=0009 0009 12:47:30 Msec=0 True Az=152.52 Ze=-21.15 Az status=0009 Ze status=0009 12:47:30 Check angles 12:47:30 SkyScan query 12:47:31 SkyScan query done: ret=0 az=134.955<-8997 ze=-0.225<-12015 Statuses=0009 0009 12:47:31 Msec=750 True Az=134.955 Ze=-0.225 Az status=0009 Ze status=0009 12:47:31 Check angles 12:47:31 SkyScan query 12:47:31 SkyScan query done: ret=0 az=117.48<-7832 ze=20.745<-10617 Statuses=0009 0009 12:47:31 Msec=1500 True Az=117.48 Ze=20.745 Az status=0009 Ze status=0009 12:47:32 Check angles 12:47:32 SkyScan query 12:47:32 SkyScan query done: ret=0 az=100.11<-6674 ze=41.685<-9221 Statuses=0009 0009 12:47:32 Msec=2250 True Az=100.11 Ze=41.685 Az status=0009 Ze status=0009 12:47:32 Check angles 12:47:32 SkyScan query 12:47:33 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 12:47:33 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 12:47:33 Check angles 12:47:33 SkyScan query 12:47:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:47:34 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 12:47:34 Message to Master queued w/err=0: serial=143008 error=0 12:47:39 Received message from Master: op=Filter serial=143009 12:47:39 Color wheel filter change from 0 to 0 12:47:39 FLIGetFilterPos err=0 currentPosition=0 12:47:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:39 Filter is already there-color wheel unchanged 12:47:39 Received message from Master: op=Shutter serial=143010 12:47:39 Shutter LASER close 12:47:39 Received message from Camera: op=State serial=143012 12:47:39 GetSingleValue result=40 Value=cccccccc 12:47:39 SkyScan query 12:47:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:47:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:39 Parameters OK 12:47:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:39 Set A/D data flow result=40 12:47:39 Set A/D channel type result=40 12:47:39 Set A/D encoding result=40 12:47:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:39 Set channel filter=0.000000e+000 result=40 12:47:39 Config A/D Result=40 12:47:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:39 Get A/D filter: -9.255963e+061 result=40 12:47:39 Get A/D value=-858993460 result=40 12:47:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:39 Parameters OK 12:47:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:39 Set A/D data flow result=40 12:47:39 Set A/D channel type result=40 12:47:39 Set A/D encoding result=40 12:47:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:39 Set channel filter=0.000000e+000 result=40 12:47:39 Config A/D Result=40 12:47:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:39 Get A/D filter: -9.255963e+061 result=40 12:47:39 Get A/D value=-858993460 result=40 12:47:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:39 Aux= 12:47:39 Message to Camera, serial 143012 queued 12:48:16 Received message from Master: op=PointingHead serial=143025 12:48:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:48:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:48:17 Point started: ret=0 12:48:17 point_skyscan result=0 12:48:17 Check angles 12:48:17 SkyScan query 12:48:18 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 12:48:18 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 12:48:18 Check angles 12:48:18 SkyScan query 12:48:19 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 12:48:19 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 12:48:19 Check angles 12:48:19 SkyScan query 12:48:19 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 12:48:19 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 12:48:20 Check angles 12:48:20 SkyScan query 12:48:20 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 12:48:20 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 12:48:20 Check angles 12:48:20 SkyScan query 12:48:21 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:48:21 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:48:21 Check angles 12:48:21 SkyScan query 12:48:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:48:22 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:48:22 Message to Master queued w/err=0: serial=143025 error=0 12:48:27 Received message from Master: op=Filter serial=143026 12:48:27 Color wheel filter change from 0 to 0 12:48:27 FLIGetFilterPos err=0 currentPosition=0 12:48:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:27 Filter is already there-color wheel unchanged 12:48:27 Received message from Master: op=Shutter serial=143027 12:48:27 Shutter LASER close 12:48:27 Received message from Camera: op=State serial=143029 12:48:27 GetSingleValue result=40 Value=cccccccc 12:48:27 SkyScan query 12:48:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:48:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:27 Parameters OK 12:48:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:27 Set A/D data flow result=40 12:48:27 Set A/D channel type result=40 12:48:27 Set A/D encoding result=40 12:48:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:27 Set channel filter=0.000000e+000 result=40 12:48:27 Config A/D Result=40 12:48:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:27 Get A/D filter: -9.255963e+061 result=40 12:48:27 Get A/D value=-858993460 result=40 12:48:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:27 Parameters OK 12:48:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:27 Set A/D data flow result=40 12:48:27 Set A/D channel type result=40 12:48:27 Set A/D encoding result=40 12:48:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:27 Set channel filter=0.000000e+000 result=40 12:48:27 Config A/D Result=40 12:48:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:27 Get A/D filter: -9.255963e+061 result=40 12:48:27 Get A/D value=-858993460 result=40 12:48:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:27 Aux= 12:48:27 Message to Camera, serial 143029 queued 12:49:04 Received message from Master: op=PointingHead serial=143042 12:49:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:49:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:49:05 Point started: ret=0 12:49:05 point_skyscan result=0 12:49:05 Check angles 12:49:05 SkyScan query 12:49:06 SkyScan query done: ret=0 az=152.91<-10194 ze=8.85<-11410 Statuses=0009 0009 12:49:06 Msec=0 True Az=152.91 Ze=8.85 Az status=0009 Ze status=0009 12:49:06 Check angles 12:49:06 SkyScan query 12:49:07 SkyScan query done: ret=0 az=135.57<-9038 ze=-12.15<-12810 Statuses=0009 0009 12:49:07 Msec=750 True Az=135.57 Ze=-12.15 Az status=0009 Ze status=0009 12:49:07 Check angles 12:49:07 SkyScan query 12:49:07 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.585<-14239 Statuses=0009 0009 12:49:07 Msec=1500 True Az=117.57 Ze=-33.585 Az status=0009 Ze status=0009 12:49:08 Check angles 12:49:08 SkyScan query 12:49:08 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.555<-15437 Statuses=0009 0009 12:49:08 Msec=2250 True Az=100.215 Ze=-51.555 Az status=0009 Ze status=0009 12:49:08 Check angles 12:49:08 SkyScan query 12:49:09 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:49:09 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:49:09 Check angles 12:49:09 SkyScan query 12:49:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:49:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:49:10 Message to Master queued w/err=0: serial=143042 error=0 12:49:15 Received message from Master: op=Filter serial=143043 12:49:15 Color wheel filter change from 0 to 0 12:49:15 FLIGetFilterPos err=0 currentPosition=0 12:49:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:15 Filter is already there-color wheel unchanged 12:49:15 Received message from Master: op=Shutter serial=143044 12:49:15 Shutter LASER close 12:49:15 Received message from Camera: op=State serial=143046 12:49:15 GetSingleValue result=40 Value=cccccccc 12:49:15 SkyScan query 12:49:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:49:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:16 Parameters OK 12:49:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:16 Set A/D data flow result=40 12:49:16 Set A/D channel type result=40 12:49:16 Set A/D encoding result=40 12:49:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:16 Set channel filter=0.000000e+000 result=40 12:49:16 Config A/D Result=40 12:49:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:16 Get A/D filter: -9.255963e+061 result=40 12:49:16 Get A/D value=-858993460 result=40 12:49:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:16 Parameters OK 12:49:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:16 Set A/D data flow result=40 12:49:16 Set A/D channel type result=40 12:49:16 Set A/D encoding result=40 12:49:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:16 Set channel filter=0.000000e+000 result=40 12:49:16 Config A/D Result=40 12:49:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:16 Get A/D filter: -9.255963e+061 result=40 12:49:16 Get A/D value=-858993460 result=40 12:49:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:16 Aux= 12:49:16 Message to Camera, serial 143046 queued 12:49:52 Received message from Master: op=PointingHead serial=143059 12:49:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:49:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:49:53 Point started: ret=0 12:49:53 point_skyscan result=0 12:49:54 Check angles 12:49:54 SkyScan query 12:49:54 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.3<-17420 Statuses=0009 0009 12:49:54 Msec=0 True Az=108.975 Ze=-81.3 Az status=0009 Ze status=0009 12:49:54 Check angles 12:49:54 SkyScan query 12:49:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.705<-18847 Statuses=0008 0009 12:49:55 Msec=750 True Az=112.995 Ze=-102.705 Az status=0008 Ze status=0009 12:49:55 Check angles 12:49:55 SkyScan query 12:49:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 12:49:56 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 12:49:56 Check angles 12:49:56 SkyScan query 12:49:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 12:49:56 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 12:49:57 Check angles 12:49:57 SkyScan query 12:49:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.54<-23036 Statuses=0008 0009 12:49:57 Msec=3000 True Az=112.995 Ze=-165.54 Az status=0008 Ze status=0009 12:49:57 Check angles 12:49:57 SkyScan query 12:49:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 12:49:58 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 12:49:58 Message to Master queued w/err=0: serial=143059 error=0 12:50:03 Received message from Master: op=Filter serial=143060 12:50:03 Color wheel filter change from 0 to 0 12:50:03 FLIGetFilterPos err=0 currentPosition=0 12:50:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:03 Filter is already there-color wheel unchanged 12:50:03 Received message from Master: op=Shutter serial=143061 12:50:03 Shutter LASER open 12:50:03 Received message from Camera: op=State serial=143063 12:50:03 GetSingleValue result=40 Value=cccccccc 12:50:03 SkyScan query 12:50:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:50:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:04 Parameters OK 12:50:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:04 Set A/D data flow result=40 12:50:04 Set A/D channel type result=40 12:50:04 Set A/D encoding result=40 12:50:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:04 Set channel filter=0.000000e+000 result=40 12:50:04 Config A/D Result=40 12:50:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:04 Get A/D filter: -9.255963e+061 result=40 12:50:04 Get A/D value=-858993460 result=40 12:50:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:04 Parameters OK 12:50:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:04 Set A/D data flow result=40 12:50:04 Set A/D channel type result=40 12:50:04 Set A/D encoding result=40 12:50:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:04 Set channel filter=0.000000e+000 result=40 12:50:04 Config A/D Result=40 12:50:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:04 Get A/D filter: -9.255963e+061 result=40 12:50:04 Get A/D value=-858993460 result=40 12:50:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:04 Aux= 12:50:04 Message to Camera, serial 143063 queued 12:50:12 Received message from Master: op=Shutter serial=143073 12:50:12 Shutter LASER close 12:50:13 Received message from Master: op=PointingHead serial=143077 12:50:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:50:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:50:13 Point started: ret=0 12:50:13 point_skyscan result=0 12:50:14 Check angles 12:50:14 SkyScan query 12:50:14 SkyScan query done: ret=0 az=90<-6000 ze=157.29<-1514 Statuses=0009 0009 12:50:14 Msec=0 True Az=90 Ze=157.29 Az status=0009 Ze status=0009 12:50:15 Check angles 12:50:15 SkyScan query 12:50:15 SkyScan query done: ret=0 az=72.495<-4833 ze=136.335<-2911 Statuses=0009 0009 12:50:15 Msec=750 True Az=72.495 Ze=136.335 Az status=0009 Ze status=0009 12:50:15 Check angles 12:50:15 SkyScan query 12:50:16 SkyScan query done: ret=0 az=55.065<-3671 ze=115.41<-4306 Statuses=0009 0009 12:50:16 Msec=1500 True Az=55.065 Ze=115.41 Az status=0009 Ze status=0009 12:50:16 Check angles 12:50:16 SkyScan query 12:50:17 SkyScan query done: ret=0 az=40.965<-2731 ze=94.395<-5707 Statuses=0009 0009 12:50:17 Msec=2250 True Az=40.965 Ze=94.395 Az status=0009 Ze status=0009 12:50:17 Check angles 12:50:17 SkyScan query 12:50:17 SkyScan query done: ret=0 az=40.995<-2733 ze=73.47<-7102 Statuses=0008 0009 12:50:17 Msec=3000 True Az=40.995 Ze=73.47 Az status=0008 Ze status=0009 12:50:18 Check angles 12:50:18 SkyScan query 12:50:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.875<-8475 Statuses=0008 0009 12:50:18 Msec=3750 True Az=40.995 Ze=52.875 Az status=0008 Ze status=0009 12:50:18 Check angles 12:50:18 SkyScan query 12:50:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:50:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:50:19 Message to Master queued w/err=0: serial=143077 error=0 12:50:24 Received message from Master: op=Filter serial=143078 12:50:24 Color wheel filter change from 0 to 0 12:50:24 FLIGetFilterPos err=0 currentPosition=0 12:50:24 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:24 Filter is already there-color wheel unchanged 12:50:24 Received message from Master: op=Shutter serial=143079 12:50:24 Shutter LASER close 12:50:24 Received message from Camera: op=State serial=143081 12:50:24 GetSingleValue result=40 Value=cccccccc 12:50:24 SkyScan query 12:50:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:50:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:25 Parameters OK 12:50:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:25 Set A/D data flow result=40 12:50:25 Set A/D channel type result=40 12:50:25 Set A/D encoding result=40 12:50:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:25 Set channel filter=0.000000e+000 result=40 12:50:25 Config A/D Result=40 12:50:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:25 Get A/D filter: -9.255963e+061 result=40 12:50:25 Get A/D value=-858993460 result=40 12:50:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:25 Parameters OK 12:50:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:25 Set A/D data flow result=40 12:50:25 Set A/D channel type result=40 12:50:25 Set A/D encoding result=40 12:50:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:25 Set channel filter=0.000000e+000 result=40 12:50:25 Config A/D Result=40 12:50:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:25 Get A/D filter: -9.255963e+061 result=40 12:50:25 Get A/D value=-858993460 result=40 12:50:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:25 Aux= 12:50:25 Message to Camera, serial 143081 queued 12:51:02 Received message from Master: op=PointingHead serial=143094 12:51:02 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:51:02 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:51:02 Point started: ret=0 12:51:02 point_skyscan result=0 12:51:03 Check angles 12:51:03 SkyScan query 12:51:03 SkyScan query done: ret=0 az=63.75<-4250 ze=66.525<-7565 Statuses=0009 0008 12:51:03 Msec=0 True Az=63.75 Ze=66.525 Az status=0009 Ze status=0008 12:51:03 Check angles 12:51:03 SkyScan query 12:51:04 SkyScan query done: ret=0 az=81.69<-5446 ze=66.51<-7566 Statuses=0009 0008 12:51:04 Msec=750 True Az=81.69 Ze=66.51 Az status=0009 Ze status=0008 12:51:04 Check angles 12:51:04 SkyScan query 12:51:05 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 12:51:05 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 12:51:05 Check angles 12:51:05 SkyScan query 12:51:06 SkyScan query done: ret=0 az=117.285<-7819 ze=66.495<-7567 Statuses=0009 0008 12:51:06 Msec=2250 True Az=117.285 Ze=66.495 Az status=0009 Ze status=0008 12:51:06 Check angles 12:51:06 SkyScan query 12:51:06 SkyScan query done: ret=0 az=134.805<-8987 ze=66.495<-7567 Statuses=0009 0008 12:51:06 Msec=3000 True Az=134.805 Ze=66.495 Az status=0009 Ze status=0008 12:51:07 Check angles 12:51:07 SkyScan query 12:51:07 SkyScan query done: ret=0 az=152.325<-10155 ze=66.495<-7567 Statuses=0009 0008 12:51:07 Msec=3750 True Az=152.325 Ze=66.495 Az status=0009 Ze status=0008 12:51:07 Check angles 12:51:07 SkyScan query 12:51:08 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:51:08 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:51:08 Message to Master queued w/err=0: serial=143094 error=0 12:51:13 Received message from Master: op=Filter serial=143095 12:51:13 Color wheel filter change from 0 to 0 12:51:13 FLIGetFilterPos err=0 currentPosition=0 12:51:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:13 Filter is already there-color wheel unchanged 12:51:13 Received message from Master: op=Shutter serial=143096 12:51:13 Shutter LASER close 12:51:13 Received message from Camera: op=State serial=143098 12:51:13 GetSingleValue result=40 Value=cccccccc 12:51:13 SkyScan query 12:51:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:51:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:14 Parameters OK 12:51:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:14 Set A/D data flow result=40 12:51:14 Set A/D channel type result=40 12:51:14 Set A/D encoding result=40 12:51:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:14 Set channel filter=0.000000e+000 result=40 12:51:14 Config A/D Result=40 12:51:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:14 Get A/D filter: -9.255963e+061 result=40 12:51:14 Get A/D value=-858993460 result=40 12:51:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:14 Parameters OK 12:51:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:14 Set A/D data flow result=40 12:51:14 Set A/D channel type result=40 12:51:14 Set A/D encoding result=40 12:51:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:14 Set channel filter=0.000000e+000 result=40 12:51:14 Config A/D Result=40 12:51:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:14 Get A/D filter: -9.255963e+061 result=40 12:51:14 Get A/D value=-858993460 result=40 12:51:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:14 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:14 Aux= 12:51:14 Message to Camera, serial 143098 queued 12:51:50 Received message from Master: op=PointingHead serial=143111 12:51:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:51:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:51:51 Point started: ret=0 12:51:51 point_skyscan result=0 12:51:52 Check angles 12:51:52 SkyScan query 12:51:52 SkyScan query done: ret=0 az=134.595<-8973 ze=36.39<-9574 Statuses=0009 0009 12:51:52 Msec=0 True Az=134.595 Ze=36.39 Az status=0009 Ze status=0009 12:51:52 Check angles 12:51:52 SkyScan query 12:51:53 SkyScan query done: ret=0 az=116.82<-7788 ze=14.97<-11002 Statuses=0009 0009 12:51:53 Msec=750 True Az=116.82 Ze=14.97 Az status=0009 Ze status=0009 12:51:53 Check angles 12:51:53 SkyScan query 12:51:54 SkyScan query done: ret=0 az=99.39<-6626 ze=-6.015<-12401 Statuses=0009 0009 12:51:54 Msec=1500 True Az=99.39 Ze=-6.015 Az status=0009 Ze status=0009 12:51:54 Check angles 12:51:54 SkyScan query 12:51:54 SkyScan query done: ret=0 az=81.93<-5462 ze=-26.985<-13799 Statuses=0009 0009 12:51:54 Msec=2250 True Az=81.93 Ze=-26.985 Az status=0009 Ze status=0009 12:51:55 Check angles 12:51:55 SkyScan query 12:51:55 SkyScan query done: ret=0 az=64.425<-4295 ze=-38.58<-14572 Statuses=0009 0008 12:51:55 Msec=3000 True Az=64.425 Ze=-38.58 Az status=0009 Ze status=0008 12:51:55 Check angles 12:51:55 SkyScan query 12:51:56 SkyScan query done: ret=0 az=46.86<-3124 ze=-38.52<-14568 Statuses=0009 0008 12:51:56 Msec=3750 True Az=46.86 Ze=-38.52 Az status=0009 Ze status=0008 12:51:56 Check angles 12:51:56 SkyScan query 12:51:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:51:57 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:51:57 Message to Master queued w/err=0: serial=143111 error=0 12:52:02 Received message from Master: op=Filter serial=143112 12:52:02 Color wheel filter change from 0 to 0 12:52:02 FLIGetFilterPos err=0 currentPosition=0 12:52:02 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:02 Filter is already there-color wheel unchanged 12:52:02 Received message from Master: op=Shutter serial=143113 12:52:02 Shutter LASER close 12:52:02 Received message from Camera: op=State serial=143115 12:52:02 GetSingleValue result=40 Value=cccccccc 12:52:02 SkyScan query 12:52:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:52:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:02 Parameters OK 12:52:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:02 Set A/D data flow result=40 12:52:02 Set A/D channel type result=40 12:52:02 Set A/D encoding result=40 12:52:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:02 Set channel filter=0.000000e+000 result=40 12:52:02 Config A/D Result=40 12:52:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:02 Get A/D filter: -9.255963e+061 result=40 12:52:02 Get A/D value=-858993460 result=40 12:52:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:02 Parameters OK 12:52:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:02 Set A/D data flow result=40 12:52:02 Set A/D channel type result=40 12:52:02 Set A/D encoding result=40 12:52:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:02 Set channel filter=0.000000e+000 result=40 12:52:02 Config A/D Result=40 12:52:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:02 Get A/D filter: -9.255963e+061 result=40 12:52:02 Get A/D value=-858993460 result=40 12:52:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:02 Aux= 12:52:02 Message to Camera, serial 143115 queued 12:52:39 Received message from Master: op=PointingHead serial=143128 12:52:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:52:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:52:40 Point started: ret=0 12:52:40 point_skyscan result=0 12:52:40 Check angles 12:52:40 SkyScan query 12:52:41 SkyScan query done: ret=0 az=64.38<-4292 ze=-68.775<-16585 Statuses=0009 0009 12:52:41 Msec=0 True Az=64.38 Ze=-68.775 Az status=0009 Ze status=0009 12:52:41 Check angles 12:52:41 SkyScan query 12:52:42 SkyScan query done: ret=0 az=82.035<-5469 ze=-89.715<-17981 Statuses=0009 0009 12:52:42 Msec=750 True Az=82.035 Ze=-89.715 Az status=0009 Ze status=0009 12:52:42 Check angles 12:52:42 SkyScan query 12:52:43 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.73<-19382 Statuses=0009 0009 12:52:43 Msec=1500 True Az=99.375 Ze=-110.73 Az status=0009 Ze status=0009 12:52:43 Check angles 12:52:43 SkyScan query 12:52:43 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.61<-20774 Statuses=0009 0009 12:52:43 Msec=2250 True Az=116.925 Ze=-131.61 Az status=0009 Ze status=0009 12:52:43 Check angles 12:52:43 SkyScan query 12:52:44 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 12:52:44 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 12:52:44 Check angles 12:52:44 SkyScan query 12:52:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 12:52:45 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 12:52:45 Message to Master queued w/err=0: serial=143128 error=0 12:52:50 Received message from Master: op=Filter serial=143129 12:52:50 Color wheel filter change from 0 to 0 12:52:50 FLIGetFilterPos err=0 currentPosition=0 12:52:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:50 Filter is already there-color wheel unchanged 12:52:50 Received message from Master: op=Shutter serial=143130 12:52:50 Shutter LASER close 12:52:50 Received message from Camera: op=State serial=143132 12:52:50 GetSingleValue result=40 Value=cccccccc 12:52:50 SkyScan query 12:52:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:52:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:51 Parameters OK 12:52:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:51 Set A/D data flow result=40 12:52:51 Set A/D channel type result=40 12:52:51 Set A/D encoding result=40 12:52:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:51 Set channel filter=0.000000e+000 result=40 12:52:51 Config A/D Result=40 12:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:51 Get A/D filter: -9.255963e+061 result=40 12:52:51 Get A/D value=-858993460 result=40 12:52:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:51 Parameters OK 12:52:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:51 Set A/D data flow result=40 12:52:51 Set A/D channel type result=40 12:52:51 Set A/D encoding result=40 12:52:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:51 Set channel filter=0.000000e+000 result=40 12:52:51 Config A/D Result=40 12:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:51 Get A/D filter: -9.255963e+061 result=40 12:52:51 Get A/D value=-858993460 result=40 12:52:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:51 Aux= 12:52:51 Message to Camera, serial 143132 queued 12:53:27 Received message from Master: op=PointingHead serial=143145 12:53:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:53:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:53:28 Point started: ret=0 12:53:28 point_skyscan result=0 12:53:28 Check angles 12:53:28 SkyScan query 12:53:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 12:53:29 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 12:53:29 Check angles 12:53:29 SkyScan query 12:53:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:53:30 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:53:30 Message to Master queued w/err=0: serial=143145 error=0 12:53:35 Received message from Master: op=Filter serial=143146 12:53:35 Color wheel filter change from 0 to 0 12:53:35 FLIGetFilterPos err=0 currentPosition=0 12:53:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:35 Filter is already there-color wheel unchanged 12:53:35 Received message from Master: op=Shutter serial=143147 12:53:35 Shutter LASER open 12:53:35 Received message from Camera: op=State serial=143149 12:53:35 GetSingleValue result=40 Value=cccccccc 12:53:35 SkyScan query 12:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:53:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:36 Parameters OK 12:53:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:36 Set A/D data flow result=40 12:53:36 Set A/D channel type result=40 12:53:36 Set A/D encoding result=40 12:53:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:36 Set channel filter=0.000000e+000 result=40 12:53:36 Config A/D Result=40 12:53:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:36 Get A/D filter: -9.255963e+061 result=40 12:53:36 Get A/D value=-858993460 result=40 12:53:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:36 Parameters OK 12:53:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:36 Set A/D data flow result=40 12:53:36 Set A/D channel type result=40 12:53:36 Set A/D encoding result=40 12:53:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:36 Set channel filter=0.000000e+000 result=40 12:53:36 Config A/D Result=40 12:53:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:36 Get A/D filter: -9.255963e+061 result=40 12:53:36 Get A/D value=-858993460 result=40 12:53:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:36 Aux= 12:53:36 Message to Camera, serial 143149 queued 12:53:44 Received message from Master: op=Shutter serial=143159 12:53:44 Shutter LASER close 12:53:45 Received message from Master: op=PointingHead serial=143163 12:53:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:53:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:53:45 Point started: ret=0 12:53:45 point_skyscan result=0 12:53:46 Check angles 12:53:46 SkyScan query 12:53:46 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.89<-21526 Statuses=0009 0009 12:53:46 Msec=0 True Az=136.35 Ze=-142.89 Az status=0009 Ze status=0009 12:53:47 Check angles 12:53:47 SkyScan query 12:53:47 SkyScan query done: ret=0 az=154.185<-10279 ze=-121.5<-20100 Statuses=0009 0009 12:53:47 Msec=750 True Az=154.185 Ze=-121.5 Az status=0009 Ze status=0009 12:53:47 Check angles 12:53:47 SkyScan query 12:53:48 SkyScan query done: ret=0 az=171.675<-11445 ze=-100.455<-18697 Statuses=0009 0009 12:53:48 Msec=1500 True Az=171.675 Ze=-100.455 Az status=0009 Ze status=0009 12:53:48 Check angles 12:53:48 SkyScan query 12:53:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.53<-17302 Statuses=0008 0009 12:53:49 Msec=2250 True Az=176.01 Ze=-79.53 Az status=0008 Ze status=0009 12:53:49 Check angles 12:53:49 SkyScan query 12:53:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.56<-15904 Statuses=0008 0009 12:53:49 Msec=3000 True Az=176.01 Ze=-58.56 Az status=0008 Ze status=0009 12:53:50 Check angles 12:53:50 SkyScan query 12:53:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:53:50 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:53:50 Message to Master queued w/err=0: serial=143163 error=0 12:53:55 Received message from Master: op=Filter serial=143164 12:53:55 Color wheel filter change from 0 to 0 12:53:55 FLIGetFilterPos err=0 currentPosition=0 12:53:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:55 Filter is already there-color wheel unchanged 12:53:55 Received message from Master: op=Shutter serial=143165 12:53:55 Shutter LASER close 12:53:56 Received message from Camera: op=State serial=143167 12:53:56 GetSingleValue result=40 Value=cccccccc 12:53:56 SkyScan query 12:53:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:53:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:56 Parameters OK 12:53:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:56 Set A/D data flow result=40 12:53:56 Set A/D channel type result=40 12:53:56 Set A/D encoding result=40 12:53:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:56 Set channel filter=0.000000e+000 result=40 12:53:56 Config A/D Result=40 12:53:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:56 Get A/D filter: -9.255963e+061 result=40 12:53:56 Get A/D value=-858993460 result=40 12:53:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:56 Parameters OK 12:53:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:56 Set A/D data flow result=40 12:53:56 Set A/D channel type result=40 12:53:56 Set A/D encoding result=40 12:53:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:56 Set channel filter=0.000000e+000 result=40 12:53:56 Config A/D Result=40 12:53:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:56 Get A/D filter: -9.255963e+061 result=40 12:53:56 Get A/D value=-858993460 result=40 12:53:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:56 Aux= 12:53:56 Message to Camera, serial 143167 queued 12:54:32 Received message from Master: op=PointingHead serial=143179 12:54:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:54:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:54:32 Point started: ret=0 12:54:32 point_skyscan result=0 12:54:33 Check angles 12:54:33 SkyScan query 12:54:34 SkyScan query done: ret=0 az=152.67<-10178 ze=-21.285<-13419 Statuses=0009 0009 12:54:34 Msec=0 True Az=152.67 Ze=-21.285 Az status=0009 Ze status=0009 12:54:34 Check angles 12:54:34 SkyScan query 12:54:34 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.36<-12024 Statuses=0009 0009 12:54:34 Msec=750 True Az=135.15 Ze=-0.36 Az status=0009 Ze status=0009 12:54:35 Check angles 12:54:35 SkyScan query 12:54:35 SkyScan query done: ret=0 az=117.585<-7839 ze=20.625<-10625 Statuses=0009 0009 12:54:35 Msec=1500 True Az=117.585 Ze=20.625 Az status=0009 Ze status=0009 12:54:35 Check angles 12:54:35 SkyScan query 12:54:36 SkyScan query done: ret=0 az=99.945<-6663 ze=42<-9200 Statuses=0009 0009 12:54:36 Msec=2250 True Az=99.945 Ze=42 Az status=0009 Ze status=0009 12:54:36 Check angles 12:54:36 SkyScan query 12:54:37 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 12:54:37 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 12:54:37 Check angles 12:54:37 SkyScan query 12:54:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:54:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:54:38 Message to Master queued w/err=0: serial=143179 error=0 12:54:43 Received message from Master: op=Filter serial=143180 12:54:43 Color wheel filter change from 0 to 0 12:54:43 FLIGetFilterPos err=0 currentPosition=0 12:54:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:43 Filter is already there-color wheel unchanged 12:54:43 Received message from Master: op=Shutter serial=143181 12:54:43 Shutter LASER close 12:54:43 Received message from Camera: op=State serial=143183 12:54:43 GetSingleValue result=40 Value=cccccccc 12:54:43 SkyScan query 12:54:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:54:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:43 Parameters OK 12:54:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:43 Set A/D data flow result=40 12:54:43 Set A/D channel type result=40 12:54:43 Set A/D encoding result=40 12:54:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:43 Set channel filter=0.000000e+000 result=40 12:54:43 Config A/D Result=40 12:54:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:43 Get A/D filter: -9.255963e+061 result=40 12:54:43 Get A/D value=-858993460 result=40 12:54:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:43 Parameters OK 12:54:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:43 Set A/D data flow result=40 12:54:43 Set A/D channel type result=40 12:54:43 Set A/D encoding result=40 12:54:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:43 Set channel filter=0.000000e+000 result=40 12:54:43 Config A/D Result=40 12:54:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:43 Get A/D filter: -9.255963e+061 result=40 12:54:43 Get A/D value=-858993460 result=40 12:54:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:43 Aux= 12:54:43 Message to Camera, serial 143183 queued 12:55:20 Received message from Master: op=PointingHead serial=143196 12:55:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:55:20 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:55:20 Point started: ret=0 12:55:20 point_skyscan result=0 12:55:21 Check angles 12:55:21 SkyScan query 12:55:22 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 12:55:22 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 12:55:22 Check angles 12:55:22 SkyScan query 12:55:23 SkyScan query done: ret=0 az=127.14<-8476 ze=38.505<-9433 Statuses=0009 0008 12:55:23 Msec=750 True Az=127.14 Ze=38.505 Az status=0009 Ze status=0008 12:55:23 Check angles 12:55:23 SkyScan query 12:55:23 SkyScan query done: ret=0 az=144.63<-9642 ze=38.505<-9433 Statuses=0009 0008 12:55:23 Msec=1500 True Az=144.63 Ze=38.505 Az status=0009 Ze status=0008 12:55:23 Check angles 12:55:23 SkyScan query 12:55:24 SkyScan query done: ret=0 az=162.21<-10814 ze=38.505<-9433 Statuses=0009 0008 12:55:24 Msec=2250 True Az=162.21 Ze=38.505 Az status=0009 Ze status=0008 12:55:24 Check angles 12:55:24 SkyScan query 12:55:25 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 12:55:25 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 12:55:25 Check angles 12:55:25 SkyScan query 12:55:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:55:26 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:55:26 Message to Master queued w/err=0: serial=143196 error=0 12:55:31 Received message from Master: op=Filter serial=143197 12:55:31 Color wheel filter change from 0 to 0 12:55:31 FLIGetFilterPos err=0 currentPosition=0 12:55:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:31 Filter is already there-color wheel unchanged 12:55:31 Received message from Master: op=Shutter serial=143198 12:55:31 Shutter LASER close 12:55:31 Received message from Camera: op=State serial=143200 12:55:31 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-14 12:55:31] 12:55:31 SkyScan query 12:55:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:55:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:31 Parameters OK 12:55:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:31 Set A/D data flow result=40 12:55:31 Set A/D channel type result=40 12:55:31 Set A/D encoding result=40 12:55:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:31 Set channel filter=0.000000e+000 result=40 12:55:31 Config A/D Result=40 12:55:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:31 Get A/D filter: -9.255963e+061 result=40 12:55:31 Get A/D value=-858993460 result=40 12:55:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:31 Parameters OK 12:55:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:31 Set A/D data flow result=40 12:55:31 Set A/D channel type result=40 12:55:31 Set A/D encoding result=40 12:55:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:31 Set channel filter=0.000000e+000 result=40 12:55:31 Config A/D Result=40 12:55:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:31 Get A/D filter: -9.255963e+061 result=40 12:55:31 Get A/D value=-858993460 result=40 12:55:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:31 Aux= 12:55:31 Message to Camera, serial 143200 queued [UTC 2018-12-14 12:55:52] 12:56:08 Received message from Master: op=PointingHead serial=143213 12:56:08 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:56:08 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:56:09 Point started: ret=0 12:56:09 point_skyscan result=0 12:56:09 Check angles 12:56:09 SkyScan query 12:56:10 SkyScan query done: ret=0 az=153.06<-10204 ze=8.895<-11407 Statuses=0009 0009 12:56:10 Msec=0 True Az=153.06 Ze=8.895 Az status=0009 Ze status=0009 12:56:10 Check angles 12:56:10 SkyScan query 12:56:11 SkyScan query done: ret=0 az=135.645<-9043 ze=-12.09<-12806 Statuses=0009 0009 12:56:11 Msec=750 True Az=135.645 Ze=-12.09 Az status=0009 Ze status=0009 12:56:11 Check angles 12:56:11 SkyScan query 12:56:11 SkyScan query done: ret=0 az=118.11<-7874 ze=-33.03<-14202 Statuses=0009 0009 12:56:11 Msec=1500 True Az=118.11 Ze=-33.03 Az status=0009 Ze status=0009 12:56:12 Check angles 12:56:12 SkyScan query 12:56:12 SkyScan query done: ret=0 az=100.65<-6710 ze=-51.51<-15434 Statuses=0009 0009 12:56:12 Msec=2250 True Az=100.65 Ze=-51.51 Az status=0009 Ze status=0009 12:56:12 Check angles 12:56:12 SkyScan query 12:56:13 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:56:13 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:56:13 Check angles 12:56:13 SkyScan query 12:56:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:56:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:56:14 Message to Master queued w/err=0: serial=143213 error=0 12:56:19 Received message from Master: op=Filter serial=143214 12:56:19 Color wheel filter change from 0 to 0 12:56:19 FLIGetFilterPos err=0 currentPosition=0 12:56:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:19 Filter is already there-color wheel unchanged 12:56:19 Received message from Master: op=Shutter serial=143215 12:56:19 Shutter LASER close 12:56:19 Received message from Camera: op=State serial=143217 12:56:19 GetSingleValue result=40 Value=cccccccc 12:56:19 SkyScan query 12:56:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:56:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:19 Parameters OK 12:56:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:19 Set A/D data flow result=40 12:56:19 Set A/D channel type result=40 12:56:19 Set A/D encoding result=40 12:56:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:19 Set channel filter=0.000000e+000 result=40 12:56:19 Config A/D Result=40 12:56:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:19 Get A/D filter: -9.255963e+061 result=40 12:56:19 Get A/D value=-858993460 result=40 12:56:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:19 Parameters OK 12:56:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:19 Set A/D data flow result=40 12:56:19 Set A/D channel type result=40 12:56:19 Set A/D encoding result=40 12:56:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:19 Set channel filter=0.000000e+000 result=40 12:56:19 Config A/D Result=40 12:56:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:19 Get A/D filter: -9.255963e+061 result=40 12:56:19 Get A/D value=-858993460 result=40 12:56:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:19 Aux= 12:56:19 Message to Camera, serial 143217 queued 12:56:55 Received message from Master: op=PointingHead serial=143229 12:56:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:56:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:56:56 Point started: ret=0 12:56:56 point_skyscan result=0 12:56:56 Check angles 12:56:56 SkyScan query 12:56:57 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.33<-17422 Statuses=0009 0009 12:56:57 Msec=0 True Az=109.335 Ze=-81.33 Az status=0009 Ze status=0009 12:56:57 Check angles 12:56:57 SkyScan query 12:56:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.3<-18820 Statuses=0008 0009 12:56:58 Msec=750 True Az=112.995 Ze=-102.3 Az status=0008 Ze status=0009 12:56:58 Check angles 12:56:58 SkyScan query 12:56:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.24<-20216 Statuses=0008 0009 12:56:58 Msec=1500 True Az=112.995 Ze=-123.24 Az status=0008 Ze status=0009 12:56:59 Check angles 12:56:59 SkyScan query 12:56:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.195<-21613 Statuses=0008 0009 12:56:59 Msec=2250 True Az=112.995 Ze=-144.195 Az status=0008 Ze status=0009 12:56:59 Check angles 12:56:59 SkyScan query 12:57:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 12:57:00 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 12:57:00 Check angles 12:57:00 SkyScan query 12:57:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 12:57:01 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 12:57:01 Message to Master queued w/err=0: serial=143229 error=0 12:57:06 Received message from Master: op=Filter serial=143230 12:57:06 Color wheel filter change from 0 to 0 12:57:06 FLIGetFilterPos err=0 currentPosition=0 12:57:06 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:06 Filter is already there-color wheel unchanged 12:57:06 Received message from Master: op=Shutter serial=143231 12:57:06 Shutter LASER open 12:57:06 Received message from Camera: op=State serial=143233 12:57:06 GetSingleValue result=40 Value=cccccccc 12:57:06 SkyScan query 12:57:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:57:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:07 Parameters OK 12:57:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:07 Set A/D data flow result=40 12:57:07 Set A/D channel type result=40 12:57:07 Set A/D encoding result=40 12:57:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:07 Set channel filter=0.000000e+000 result=40 12:57:07 Config A/D Result=40 12:57:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:07 Get A/D filter: -9.255963e+061 result=40 12:57:07 Get A/D value=-858993460 result=40 12:57:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:07 Parameters OK 12:57:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:07 Set A/D data flow result=40 12:57:07 Set A/D channel type result=40 12:57:07 Set A/D encoding result=40 12:57:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:07 Set channel filter=0.000000e+000 result=40 12:57:07 Config A/D Result=40 12:57:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:07 Get A/D filter: -9.255963e+061 result=40 12:57:07 Get A/D value=-858993460 result=40 12:57:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:07 Aux= 12:57:07 Message to Camera, serial 143233 queued 12:57:14 Received message from Master: op=Shutter serial=143242 12:57:14 Shutter LASER close 12:57:15 Received message from Master: op=PointingHead serial=143246 12:57:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:57:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:57:15 Point started: ret=0 12:57:15 point_skyscan result=0 12:57:16 Check angles 12:57:16 SkyScan query 12:57:16 SkyScan query done: ret=0 az=89.82<-5988 ze=157.26<-1516 Statuses=0009 0009 12:57:16 Msec=0 True Az=89.82 Ze=157.26 Az status=0009 Ze status=0009 12:57:16 Check angles 12:57:16 SkyScan query 12:57:17 SkyScan query done: ret=0 az=72.465<-4831 ze=136.305<-2913 Statuses=0009 0009 12:57:17 Msec=750 True Az=72.465 Ze=136.305 Az status=0009 Ze status=0009 12:57:17 Check angles 12:57:17 SkyScan query 12:57:18 SkyScan query done: ret=0 az=55.02<-3668 ze=115.38<-4308 Statuses=0009 0009 12:57:18 Msec=1500 True Az=55.02 Ze=115.38 Az status=0009 Ze status=0009 12:57:18 Check angles 12:57:18 SkyScan query 12:57:19 SkyScan query done: ret=0 az=40.965<-2731 ze=94.365<-5709 Statuses=0009 0009 12:57:19 Msec=2250 True Az=40.965 Ze=94.365 Az status=0009 Ze status=0009 12:57:19 Check angles 12:57:19 SkyScan query 12:57:19 SkyScan query done: ret=0 az=40.995<-2733 ze=73.41<-7106 Statuses=0008 0009 12:57:19 Msec=3000 True Az=40.995 Ze=73.41 Az status=0008 Ze status=0009 12:57:19 Check angles 12:57:19 SkyScan query 12:57:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 12:57:20 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 12:57:20 Check angles 12:57:20 SkyScan query 12:57:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:57:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:57:21 Message to Master queued w/err=0: serial=143246 error=0 12:57:26 Received message from Master: op=Filter serial=143247 12:57:26 Color wheel filter change from 0 to 0 12:57:26 FLIGetFilterPos err=0 currentPosition=0 12:57:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:26 Filter is already there-color wheel unchanged 12:57:26 Received message from Master: op=Shutter serial=143248 12:57:26 Shutter LASER close 12:57:26 Received message from Camera: op=State serial=143250 12:57:26 GetSingleValue result=40 Value=cccccccc 12:57:26 SkyScan query 12:57:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:57:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:27 Parameters OK 12:57:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:27 Set A/D data flow result=40 12:57:27 Set A/D channel type result=40 12:57:27 Set A/D encoding result=40 12:57:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:27 Set channel filter=0.000000e+000 result=40 12:57:27 Config A/D Result=40 12:57:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:27 Get A/D filter: -9.255963e+061 result=40 12:57:27 Get A/D value=-858993460 result=40 12:57:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:27 Parameters OK 12:57:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:27 Set A/D data flow result=40 12:57:27 Set A/D channel type result=40 12:57:27 Set A/D encoding result=40 12:57:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:27 Set channel filter=0.000000e+000 result=40 12:57:27 Config A/D Result=40 12:57:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:27 Get A/D filter: -9.255963e+061 result=40 12:57:27 Get A/D value=-858993460 result=40 12:57:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:27 Aux= 12:57:27 Message to Camera, serial 143250 queued 12:58:03 Received message from Master: op=PointingHead serial=143263 12:58:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:58:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:58:04 Point started: ret=0 12:58:04 point_skyscan result=0 12:58:05 Check angles 12:58:05 SkyScan query 12:58:05 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 12:58:05 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 12:58:05 Check angles 12:58:05 SkyScan query 12:58:06 SkyScan query done: ret=0 az=81.42<-5428 ze=66.51<-7566 Statuses=0009 0008 12:58:06 Msec=750 True Az=81.42 Ze=66.51 Az status=0009 Ze status=0008 12:58:06 Check angles 12:58:06 SkyScan query 12:58:07 SkyScan query done: ret=0 az=99.03<-6602 ze=66.495<-7567 Statuses=0009 0008 12:58:07 Msec=1500 True Az=99.03 Ze=66.495 Az status=0009 Ze status=0008 12:58:07 Check angles 12:58:07 SkyScan query 12:58:07 SkyScan query done: ret=0 az=116.4<-7760 ze=66.495<-7567 Statuses=0009 0008 12:58:07 Msec=2250 True Az=116.4 Ze=66.495 Az status=0009 Ze status=0008 12:58:08 Check angles 12:58:08 SkyScan query 12:58:08 SkyScan query done: ret=0 az=133.86<-8924 ze=66.495<-7567 Statuses=0009 0008 12:58:08 Msec=3000 True Az=133.86 Ze=66.495 Az status=0009 Ze status=0008 12:58:08 Check angles 12:58:08 SkyScan query 12:58:09 SkyScan query done: ret=0 az=151.41<-10094 ze=66.495<-7567 Statuses=0009 0008 12:58:09 Msec=3750 True Az=151.41 Ze=66.495 Az status=0009 Ze status=0008 12:58:09 Check angles 12:58:09 SkyScan query 12:58:10 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:58:10 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:58:10 Message to Master queued w/err=0: serial=143263 error=0 12:58:15 Received message from Master: op=Filter serial=143264 12:58:15 Color wheel filter change from 0 to 0 12:58:15 FLIGetFilterPos err=0 currentPosition=0 12:58:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:15 Filter is already there-color wheel unchanged 12:58:15 Received message from Master: op=Shutter serial=143265 12:58:15 Shutter LASER close 12:58:15 Received message from Camera: op=State serial=143267 12:58:15 GetSingleValue result=40 Value=cccccccc 12:58:15 SkyScan query 12:58:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:58:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:15 Parameters OK 12:58:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:15 Set A/D data flow result=40 12:58:15 Set A/D channel type result=40 12:58:15 Set A/D encoding result=40 12:58:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:15 Set channel filter=0.000000e+000 result=40 12:58:15 Config A/D Result=40 12:58:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:15 Get A/D filter: -9.255963e+061 result=40 12:58:15 Get A/D value=-858993460 result=40 12:58:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:15 Parameters OK 12:58:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:15 Set A/D data flow result=40 12:58:15 Set A/D channel type result=40 12:58:15 Set A/D encoding result=40 12:58:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:15 Set channel filter=0.000000e+000 result=40 12:58:15 Config A/D Result=40 12:58:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:15 Get A/D filter: -9.255963e+061 result=40 12:58:15 Get A/D value=-858993460 result=40 12:58:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:15 Aux= 12:58:15 Message to Camera, serial 143267 queued 12:58:52 Received message from Master: op=PointingHead serial=143280 12:58:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:58:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:58:53 Point started: ret=0 12:58:53 point_skyscan result=0 12:58:53 Check angles 12:58:53 SkyScan query 12:58:54 SkyScan query done: ret=0 az=135.06<-9004 ze=36.84<-9544 Statuses=0009 0009 12:58:54 Msec=0 True Az=135.06 Ze=36.84 Az status=0009 Ze status=0009 12:58:54 Check angles 12:58:54 SkyScan query 12:58:55 SkyScan query done: ret=0 az=117.15<-7810 ze=15.51<-10966 Statuses=0009 0009 12:58:55 Msec=750 True Az=117.15 Ze=15.51 Az status=0009 Ze status=0009 12:58:55 Check angles 12:58:55 SkyScan query 12:58:56 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.535<-12369 Statuses=0009 0009 12:58:56 Msec=1500 True Az=99.885 Ze=-5.535 Az status=0009 Ze status=0009 12:58:56 Check angles 12:58:56 SkyScan query 12:58:56 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.52<-13768 Statuses=0009 0009 12:58:56 Msec=2250 True Az=82.23 Ze=-26.52 Az status=0009 Ze status=0009 12:58:56 Check angles 12:58:56 SkyScan query 12:58:57 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.595<-14573 Statuses=0009 0008 12:58:57 Msec=3000 True Az=64.86 Ze=-38.595 Az status=0009 Ze status=0008 12:58:57 Check angles 12:58:57 SkyScan query 12:58:58 SkyScan query done: ret=0 az=47.325<-3155 ze=-38.52<-14568 Statuses=0009 0008 12:58:58 Msec=3750 True Az=47.325 Ze=-38.52 Az status=0009 Ze status=0008 12:58:58 Check angles 12:58:58 SkyScan query 12:58:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:58:59 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:58:59 Message to Master queued w/err=0: serial=143280 error=0 12:59:04 Received message from Master: op=Filter serial=143281 12:59:04 Color wheel filter change from 0 to 0 12:59:04 FLIGetFilterPos err=0 currentPosition=0 12:59:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:04 Filter is already there-color wheel unchanged 12:59:04 Received message from Master: op=Shutter serial=143282 12:59:04 Shutter LASER close 12:59:04 Received message from Camera: op=State serial=143284 12:59:04 GetSingleValue result=40 Value=cccccccc 12:59:04 SkyScan query 12:59:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:59:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:04 Parameters OK 12:59:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:04 Set A/D data flow result=40 12:59:04 Set A/D channel type result=40 12:59:04 Set A/D encoding result=40 12:59:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:04 Set channel filter=0.000000e+000 result=40 12:59:04 Config A/D Result=40 12:59:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:04 Get A/D filter: -9.255963e+061 result=40 12:59:04 Get A/D value=-858993460 result=40 12:59:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:04 Parameters OK 12:59:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:04 Set A/D data flow result=40 12:59:04 Set A/D channel type result=40 12:59:04 Set A/D encoding result=40 12:59:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:04 Set channel filter=0.000000e+000 result=40 12:59:04 Config A/D Result=40 12:59:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:04 Get A/D filter: -9.255963e+061 result=40 12:59:04 Get A/D value=-858993460 result=40 12:59:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:04 Aux= 12:59:04 Message to Camera, serial 143284 queued 12:59:40 Received message from Master: op=PointingHead serial=143296 12:59:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:59:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:59:41 Point started: ret=0 12:59:41 point_skyscan result=0 12:59:41 Check angles 12:59:41 SkyScan query 12:59:42 SkyScan query done: ret=0 az=64.125<-4275 ze=-68.565<-16571 Statuses=0009 0009 12:59:42 Msec=0 True Az=64.125 Ze=-68.565 Az status=0009 Ze status=0009 12:59:42 Check angles 12:59:42 SkyScan query 12:59:43 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.535<-17969 Statuses=0009 0009 12:59:43 Msec=750 True Az=81.66 Ze=-89.535 Az status=0009 Ze status=0009 12:59:43 Check angles 12:59:43 SkyScan query 12:59:43 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.505<-19367 Statuses=0009 0009 12:59:43 Msec=1500 True Az=99.135 Ze=-110.505 Az status=0009 Ze status=0009 12:59:44 Check angles 12:59:44 SkyScan query 12:59:44 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.385<-20759 Statuses=0009 0009 12:59:44 Msec=2250 True Az=116.625 Ze=-131.385 Az status=0009 Ze status=0009 12:59:44 Check angles 12:59:44 SkyScan query 12:59:45 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 12:59:45 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 12:59:45 Check angles 12:59:45 SkyScan query 12:59:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:59:46 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:59:46 Message to Master queued w/err=0: serial=143296 error=0 12:59:51 Received message from Master: op=Filter serial=143297 12:59:51 Color wheel filter change from 0 to 0 12:59:51 FLIGetFilterPos err=0 currentPosition=0 12:59:51 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:51 Filter is already there-color wheel unchanged 12:59:51 Received message from Master: op=Shutter serial=143298 12:59:51 Shutter LASER close 12:59:51 Received message from Camera: op=State serial=143300 12:59:51 GetSingleValue result=40 Value=cccccccc 12:59:51 SkyScan query 12:59:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:59:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:51 Parameters OK 12:59:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:51 Set A/D data flow result=40 12:59:51 Set A/D channel type result=40 12:59:51 Set A/D encoding result=40 12:59:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:51 Set channel filter=0.000000e+000 result=40 12:59:51 Config A/D Result=40 12:59:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:51 Get A/D filter: -9.255963e+061 result=40 12:59:51 Get A/D value=-858993460 result=40 12:59:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:51 Parameters OK 12:59:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:51 Set A/D data flow result=40 12:59:51 Set A/D channel type result=40 12:59:51 Set A/D encoding result=40 12:59:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:51 Set channel filter=0.000000e+000 result=40 12:59:51 Config A/D Result=40 12:59:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:51 Get A/D filter: -9.255963e+061 result=40 12:59:51 Get A/D value=-858993460 result=40 12:59:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:51 Aux= 12:59:51 Message to Camera, serial 143300 queued 13:00:28 Received message from Master: op=PointingHead serial=143313 13:00:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:00:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:00:29 Point started: ret=0 13:00:29 point_skyscan result=0 13:00:29 Check angles 13:00:29 SkyScan query 13:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.315<-23421 Statuses=0009 0009 13:00:30 Msec=0 True Az=112.995 Ze=-171.315 Az status=0009 Ze status=0009 13:00:30 Check angles 13:00:30 SkyScan query 13:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:00:31 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:00:31 Message to Master queued w/err=0: serial=143313 error=0 13:00:36 Received message from Master: op=Filter serial=143314 13:00:36 Color wheel filter change from 0 to 0 13:00:36 FLIGetFilterPos err=0 currentPosition=0 13:00:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:36 Filter is already there-color wheel unchanged 13:00:36 Received message from Master: op=Shutter serial=143315 13:00:36 Shutter LASER open 13:00:36 Received message from Camera: op=State serial=143317 13:00:36 GetSingleValue result=40 Value=cccccccc 13:00:36 SkyScan query 13:00:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:00:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:37 Parameters OK 13:00:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:37 Set A/D data flow result=40 13:00:37 Set A/D channel type result=40 13:00:37 Set A/D encoding result=40 13:00:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:37 Set channel filter=0.000000e+000 result=40 13:00:37 Config A/D Result=40 13:00:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:37 Get A/D filter: -9.255963e+061 result=40 13:00:37 Get A/D value=-858993460 result=40 13:00:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:37 Parameters OK 13:00:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:37 Set A/D data flow result=40 13:00:37 Set A/D channel type result=40 13:00:37 Set A/D encoding result=40 13:00:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:37 Set channel filter=0.000000e+000 result=40 13:00:37 Config A/D Result=40 13:00:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:37 Get A/D filter: -9.255963e+061 result=40 13:00:37 Get A/D value=-858993460 result=40 13:00:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:37 Aux= 13:00:37 Message to Camera, serial 143317 queued 13:00:45 Received message from Master: op=Shutter serial=143327 13:00:45 Shutter LASER close 13:00:46 Received message from Master: op=PointingHead serial=143331 13:00:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:00:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:00:46 Point started: ret=0 13:00:46 point_skyscan result=0 13:00:47 Check angles 13:00:47 SkyScan query 13:00:47 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.325<-21555 Statuses=0009 0009 13:00:47 Msec=0 True Az=135.93 Ze=-143.325 Az status=0009 Ze status=0009 13:00:48 Check angles 13:00:48 SkyScan query 13:00:48 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.325<-20155 Statuses=0009 0009 13:00:48 Msec=750 True Az=153.51 Ze=-122.325 Az status=0009 Ze status=0009 13:00:48 Check angles 13:00:48 SkyScan query 13:00:49 SkyScan query done: ret=0 az=171<-11400 ze=-101.415<-18761 Statuses=0009 0009 13:00:49 Msec=1500 True Az=171 Ze=-101.415 Az status=0009 Ze status=0009 13:00:49 Check angles 13:00:49 SkyScan query 13:00:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.46<-17364 Statuses=0008 0009 13:00:50 Msec=2250 True Az=176.01 Ze=-80.46 Az status=0008 Ze status=0009 13:00:50 Check angles 13:00:50 SkyScan query 13:00:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.505<-15967 Statuses=0008 0009 13:00:50 Msec=3000 True Az=176.01 Ze=-59.505 Az status=0008 Ze status=0009 13:00:51 Check angles 13:00:51 SkyScan query 13:00:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:00:51 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:00:51 Message to Master queued w/err=0: serial=143331 error=0 13:00:56 Received message from Master: op=Filter serial=143332 13:00:56 Color wheel filter change from 0 to 0 13:00:56 FLIGetFilterPos err=0 currentPosition=0 13:00:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:56 Filter is already there-color wheel unchanged 13:00:56 Received message from Master: op=Shutter serial=143333 13:00:56 Shutter LASER close 13:00:56 Received message from Camera: op=State serial=143335 13:00:56 GetSingleValue result=40 Value=cccccccc 13:00:56 SkyScan query 13:00:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:00:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:57 Parameters OK 13:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:57 Set A/D data flow result=40 13:00:57 Set A/D channel type result=40 13:00:57 Set A/D encoding result=40 13:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:57 Set channel filter=0.000000e+000 result=40 13:00:57 Config A/D Result=40 13:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:57 Get A/D filter: -9.255963e+061 result=40 13:00:57 Get A/D value=-858993460 result=40 13:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:57 Parameters OK 13:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:57 Set A/D data flow result=40 13:00:57 Set A/D channel type result=40 13:00:57 Set A/D encoding result=40 13:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:57 Set channel filter=0.000000e+000 result=40 13:00:57 Config A/D Result=40 13:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:57 Get A/D filter: -9.255963e+061 result=40 13:00:57 Get A/D value=-858993460 result=40 13:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:57 Aux= 13:00:57 Message to Camera, serial 143335 queued 13:01:34 Received message from Master: op=PointingHead serial=143348 13:01:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:01:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:01:34 Point started: ret=0 13:01:34 point_skyscan result=0 13:01:35 Check angles 13:01:35 SkyScan query 13:01:36 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.39<-13426 Statuses=0009 0009 13:01:36 Msec=0 True Az=152.76 Ze=-21.39 Az status=0009 Ze status=0009 13:01:36 Check angles 13:01:36 SkyScan query 13:01:36 SkyScan query done: ret=0 az=134.88<-8992 ze=-0<-12000 Statuses=0009 0009 13:01:36 Msec=750 True Az=134.88 Ze=-0 Az status=0009 Ze status=0009 13:01:36 Check angles 13:01:36 SkyScan query 13:01:37 SkyScan query done: ret=0 az=117.375<-7825 ze=20.97<-10602 Statuses=0009 0009 13:01:37 Msec=1500 True Az=117.375 Ze=20.97 Az status=0009 Ze status=0009 13:01:37 Check angles 13:01:37 SkyScan query 13:01:38 SkyScan query done: ret=0 az=99.615<-6641 ze=42.3<-9180 Statuses=0009 0009 13:01:38 Msec=2250 True Az=99.615 Ze=42.3 Az status=0009 Ze status=0009 13:01:38 Check angles 13:01:38 SkyScan query 13:01:39 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 13:01:39 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 13:01:39 Check angles 13:01:39 SkyScan query 13:01:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:01:39 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 13:01:39 Message to Master queued w/err=0: serial=143348 error=0 13:01:44 Received message from Master: op=Filter serial=143349 13:01:44 Color wheel filter change from 0 to 0 13:01:44 FLIGetFilterPos err=0 currentPosition=0 13:01:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:44 Filter is already there-color wheel unchanged 13:01:45 Received message from Master: op=Shutter serial=143350 13:01:45 Shutter LASER close 13:01:45 Received message from Camera: op=State serial=143352 13:01:45 GetSingleValue result=40 Value=cccccccc 13:01:45 SkyScan query 13:01:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 13:01:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:45 Parameters OK 13:01:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:45 Set A/D data flow result=40 13:01:45 Set A/D channel type result=40 13:01:45 Set A/D encoding result=40 13:01:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:45 Set channel filter=0.000000e+000 result=40 13:01:45 Config A/D Result=40 13:01:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:45 Get A/D filter: -9.255963e+061 result=40 13:01:45 Get A/D value=-858993460 result=40 13:01:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:45 Parameters OK 13:01:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:45 Set A/D data flow result=40 13:01:45 Set A/D channel type result=40 13:01:45 Set A/D encoding result=40 13:01:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:45 Set channel filter=0.000000e+000 result=40 13:01:45 Config A/D Result=40 13:01:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:45 Get A/D filter: -9.255963e+061 result=40 13:01:45 Get A/D value=-858993460 result=40 13:01:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:45 Aux= 13:01:45 Message to Camera, serial 143352 queued 13:02:22 Received message from Master: op=PointingHead serial=143365 13:02:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:02:22 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:02:22 Point started: ret=0 13:02:22 point_skyscan result=0 13:02:23 Check angles 13:02:23 SkyScan query 13:02:24 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 13:02:24 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 13:02:24 Check angles 13:02:24 SkyScan query 13:02:24 SkyScan query done: ret=0 az=126.975<-8465 ze=38.505<-9433 Statuses=0009 0008 13:02:24 Msec=750 True Az=126.975 Ze=38.505 Az status=0009 Ze status=0008 13:02:25 Check angles 13:02:25 SkyScan query 13:02:25 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 13:02:25 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 13:02:25 Check angles 13:02:25 SkyScan query 13:02:26 SkyScan query done: ret=0 az=161.925<-10795 ze=38.505<-9433 Statuses=0009 0008 13:02:26 Msec=2250 True Az=161.925 Ze=38.505 Az status=0009 Ze status=0008 13:02:26 Check angles 13:02:26 SkyScan query 13:02:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:02:27 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:02:27 Check angles 13:02:27 SkyScan query 13:02:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:02:27 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:02:27 Message to Master queued w/err=0: serial=143365 error=0 13:02:32 Received message from Master: op=Filter serial=143366 13:02:32 Color wheel filter change from 0 to 0 13:02:32 FLIGetFilterPos err=0 currentPosition=0 13:02:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:32 Filter is already there-color wheel unchanged 13:02:33 Received message from Master: op=Shutter serial=143367 13:02:33 Shutter LASER close 13:02:33 Received message from Camera: op=State serial=143369 13:02:33 GetSingleValue result=40 Value=cccccccc 13:02:33 SkyScan query 13:02:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:02:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:33 Parameters OK 13:02:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:33 Set A/D data flow result=40 13:02:33 Set A/D channel type result=40 13:02:33 Set A/D encoding result=40 13:02:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:33 Set channel filter=0.000000e+000 result=40 13:02:33 Config A/D Result=40 13:02:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:33 Get A/D filter: -9.255963e+061 result=40 13:02:33 Get A/D value=-858993460 result=40 13:02:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:33 Parameters OK 13:02:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:33 Set A/D data flow result=40 13:02:33 Set A/D channel type result=40 13:02:33 Set A/D encoding result=40 13:02:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:33 Set channel filter=0.000000e+000 result=40 13:02:33 Config A/D Result=40 13:02:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:33 Get A/D filter: -9.255963e+061 result=40 13:02:33 Get A/D value=-858993460 result=40 13:02:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:33 Aux= 13:02:33 Message to Camera, serial 143369 queued 13:03:10 Received message from Master: op=PointingHead serial=143382 13:03:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:03:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:03:10 Point started: ret=0 13:03:10 point_skyscan result=0 13:03:11 Check angles 13:03:11 SkyScan query 13:03:12 SkyScan query done: ret=0 az=152.745<-10183 ze=8.46<-11436 Statuses=0009 0009 13:03:12 Msec=0 True Az=152.745 Ze=8.46 Az status=0009 Ze status=0009 13:03:12 Check angles 13:03:12 SkyScan query 13:03:12 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.435<-12829 Statuses=0009 0009 13:03:12 Msec=750 True Az=135.345 Ze=-12.435 Az status=0009 Ze status=0009 13:03:13 Check angles 13:03:13 SkyScan query 13:03:13 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.435<-14229 Statuses=0009 0009 13:03:13 Msec=1500 True Az=117.765 Ze=-33.435 Az status=0009 Ze status=0009 13:03:13 Check angles 13:03:13 SkyScan query 13:03:14 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.555<-15437 Statuses=0009 0009 13:03:14 Msec=2250 True Az=100.41 Ze=-51.555 Az status=0009 Ze status=0009 13:03:14 Check angles 13:03:14 SkyScan query 13:03:15 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:03:15 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:03:15 Check angles 13:03:15 SkyScan query 13:03:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:03:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:03:15 Message to Master queued w/err=0: serial=143382 error=0 13:03:20 Received message from Master: op=Filter serial=143383 13:03:20 Color wheel filter change from 0 to 0 13:03:20 FLIGetFilterPos err=0 currentPosition=0 13:03:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:20 Filter is already there-color wheel unchanged 13:03:21 Received message from Master: op=Shutter serial=143384 13:03:21 Shutter LASER close 13:03:21 Received message from Camera: op=State serial=143386 13:03:21 GetSingleValue result=40 Value=cccccccc 13:03:21 SkyScan query 13:03:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:03:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:21 Parameters OK 13:03:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:21 Set A/D data flow result=40 13:03:21 Set A/D channel type result=40 13:03:21 Set A/D encoding result=40 13:03:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:21 Set channel filter=0.000000e+000 result=40 13:03:21 Config A/D Result=40 13:03:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:21 Get A/D filter: -9.255963e+061 result=40 13:03:21 Get A/D value=-858993460 result=40 13:03:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:21 Parameters OK 13:03:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:21 Set A/D data flow result=40 13:03:21 Set A/D channel type result=40 13:03:21 Set A/D encoding result=40 13:03:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:21 Set channel filter=0.000000e+000 result=40 13:03:21 Config A/D Result=40 13:03:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:21 Get A/D filter: -9.255963e+061 result=40 13:03:21 Get A/D value=-858993460 result=40 13:03:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:21 Aux= 13:03:21 Message to Camera, serial 143386 queued 13:03:58 Received message from Master: op=PointingHead serial=143399 13:03:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:03:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:03:58 Point started: ret=0 13:03:58 point_skyscan result=0 13:03:59 Check angles 13:03:59 SkyScan query 13:04:00 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.075<-17405 Statuses=0009 0009 13:04:00 Msec=0 True Az=108.855 Ze=-81.075 Az status=0009 Ze status=0009 13:04:00 Check angles 13:04:00 SkyScan query 13:04:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.06<-18804 Statuses=0008 0009 13:04:01 Msec=750 True Az=112.995 Ze=-102.06 Az status=0008 Ze status=0009 13:04:01 Check angles 13:04:01 SkyScan query 13:04:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.985<-20199 Statuses=0008 0009 13:04:01 Msec=1500 True Az=112.995 Ze=-122.985 Az status=0008 Ze status=0009 13:04:01 Check angles 13:04:01 SkyScan query 13:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.955<-21597 Statuses=0008 0009 13:04:02 Msec=2250 True Az=112.995 Ze=-143.955 Az status=0008 Ze status=0009 13:04:02 Check angles 13:04:02 SkyScan query 13:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.91<-22994 Statuses=0008 0009 13:04:03 Msec=3000 True Az=112.995 Ze=-164.91 Az status=0008 Ze status=0009 13:04:03 Check angles 13:04:03 SkyScan query 13:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 13:04:04 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 13:04:04 Message to Master queued w/err=0: serial=143399 error=0 13:04:09 Received message from Master: op=Filter serial=143400 13:04:09 Color wheel filter change from 0 to 0 13:04:09 FLIGetFilterPos err=0 currentPosition=0 13:04:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:09 Filter is already there-color wheel unchanged 13:04:09 Received message from Master: op=Shutter serial=143401 13:04:09 Shutter LASER open 13:04:09 Received message from Camera: op=State serial=143403 13:04:09 GetSingleValue result=40 Value=cccccccc 13:04:09 SkyScan query 13:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:04:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:10 Parameters OK 13:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:10 Set A/D data flow result=40 13:04:10 Set A/D channel type result=40 13:04:10 Set A/D encoding result=40 13:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:10 Set channel filter=0.000000e+000 result=40 13:04:10 Config A/D Result=40 13:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:10 Get A/D filter: -9.255963e+061 result=40 13:04:10 Get A/D value=-858993460 result=40 13:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:10 Parameters OK 13:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:10 Set A/D data flow result=40 13:04:10 Set A/D channel type result=40 13:04:10 Set A/D encoding result=40 13:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:10 Set channel filter=0.000000e+000 result=40 13:04:10 Config A/D Result=40 13:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:10 Get A/D filter: -9.255963e+061 result=40 13:04:10 Get A/D value=-858993460 result=40 13:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:10 Aux= 13:04:10 Message to Camera, serial 143403 queued 13:04:18 Received message from Master: op=Shutter serial=143413 13:04:18 Shutter LASER close 13:04:18 Received message from Master: op=PointingHead serial=143417 13:04:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:04:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:04:19 Point started: ret=0 13:04:19 point_skyscan result=0 13:04:19 Check angles 13:04:19 SkyScan query 13:04:20 SkyScan query done: ret=0 az=89.805<-5987 ze=157.245<-1517 Statuses=0009 0009 13:04:20 Msec=0 True Az=89.805 Ze=157.245 Az status=0009 Ze status=0009 13:04:20 Check angles 13:04:20 SkyScan query 13:04:21 SkyScan query done: ret=0 az=72.27<-4818 ze=136.29<-2914 Statuses=0009 0009 13:04:21 Msec=750 True Az=72.27 Ze=136.29 Az status=0009 Ze status=0009 13:04:21 Check angles 13:04:21 SkyScan query 13:04:22 SkyScan query done: ret=0 az=54.51<-3634 ze=114.87<-4342 Statuses=0009 0009 13:04:22 Msec=1500 True Az=54.51 Ze=114.87 Az status=0009 Ze status=0009 13:04:22 Check angles 13:04:22 SkyScan query 13:04:22 SkyScan query done: ret=0 az=40.98<-2732 ze=93.93<-5738 Statuses=0009 0009 13:04:22 Msec=2250 True Az=40.98 Ze=93.93 Az status=0009 Ze status=0009 13:04:22 Check angles 13:04:22 SkyScan query 13:04:23 SkyScan query done: ret=0 az=40.995<-2733 ze=72.96<-7136 Statuses=0008 0009 13:04:23 Msec=3000 True Az=40.995 Ze=72.96 Az status=0008 Ze status=0009 13:04:23 Check angles 13:04:23 SkyScan query 13:04:24 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 13:04:24 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 13:04:24 Check angles 13:04:24 SkyScan query 13:04:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:04:25 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:04:25 Message to Master queued w/err=0: serial=143417 error=0 13:04:30 Received message from Master: op=Filter serial=143418 13:04:30 Color wheel filter change from 0 to 0 13:04:30 FLIGetFilterPos err=0 currentPosition=0 13:04:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:30 Filter is already there-color wheel unchanged 13:04:30 Received message from Master: op=Shutter serial=143419 13:04:30 Shutter LASER close 13:04:30 Received message from Camera: op=State serial=143421 13:04:30 GetSingleValue result=40 Value=cccccccc 13:04:30 SkyScan query 13:04:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:04:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:30 Parameters OK 13:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:30 Set A/D data flow result=40 13:04:30 Set A/D channel type result=40 13:04:30 Set A/D encoding result=40 13:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:30 Set channel filter=0.000000e+000 result=40 13:04:30 Config A/D Result=40 13:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:30 Get A/D filter: -9.255963e+061 result=40 13:04:30 Get A/D value=-858993460 result=40 13:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:30 Parameters OK 13:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:30 Set A/D data flow result=40 13:04:30 Set A/D channel type result=40 13:04:30 Set A/D encoding result=40 13:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:30 Set channel filter=0.000000e+000 result=40 13:04:30 Config A/D Result=40 13:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:30 Get A/D filter: -9.255963e+061 result=40 13:04:30 Get A/D value=-858993460 result=40 13:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:30 Aux= 13:04:30 Message to Camera, serial 143421 queued 13:05:07 Received message from Master: op=PointingHead serial=143434 13:05:07 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:05:07 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:05:08 Point started: ret=0 13:05:08 point_skyscan result=0 13:05:08 Check angles 13:05:08 SkyScan query 13:05:09 SkyScan query done: ret=0 az=64.32<-4288 ze=66.555<-7563 Statuses=0009 0008 13:05:09 Msec=0 True Az=64.32 Ze=66.555 Az status=0009 Ze status=0008 13:05:09 Check angles 13:05:09 SkyScan query 13:05:10 SkyScan query done: ret=0 az=82.23<-5482 ze=66.51<-7566 Statuses=0009 0008 13:05:10 Msec=750 True Az=82.23 Ze=66.51 Az status=0009 Ze status=0008 13:05:10 Check angles 13:05:10 SkyScan query 13:05:11 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 13:05:11 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 13:05:11 Check angles 13:05:11 SkyScan query 13:05:11 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 13:05:11 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 13:05:11 Check angles 13:05:11 SkyScan query 13:05:12 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 13:05:12 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 13:05:12 Check angles 13:05:12 SkyScan query 13:05:13 SkyScan query done: ret=0 az=152.07<-10138 ze=66.495<-7567 Statuses=0009 0008 13:05:13 Msec=3750 True Az=152.07 Ze=66.495 Az status=0009 Ze status=0008 13:05:13 Check angles 13:05:13 SkyScan query 13:05:14 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 13:05:14 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 13:05:14 Message to Master queued w/err=0: serial=143434 error=0 13:05:19 Received message from Master: op=Filter serial=143435 13:05:19 Color wheel filter change from 0 to 0 13:05:19 FLIGetFilterPos err=0 currentPosition=0 13:05:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:19 Filter is already there-color wheel unchanged 13:05:19 Received message from Master: op=Shutter serial=143436 13:05:19 Shutter LASER close 13:05:19 Received message from Camera: op=State serial=143438 13:05:19 GetSingleValue result=40 Value=cccccccc 13:05:19 SkyScan query 13:05:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:05:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:19 Parameters OK 13:05:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:19 Set A/D data flow result=40 13:05:19 Set A/D channel type result=40 13:05:19 Set A/D encoding result=40 13:05:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:19 Set channel filter=0.000000e+000 result=40 13:05:19 Config A/D Result=40 13:05:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:19 Get A/D filter: -9.255963e+061 result=40 13:05:19 Get A/D value=-858993460 result=40 13:05:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:19 Parameters OK 13:05:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:19 Set A/D data flow result=40 13:05:19 Set A/D channel type result=40 13:05:19 Set A/D encoding result=40 13:05:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:19 Set channel filter=0.000000e+000 result=40 13:05:19 Config A/D Result=40 13:05:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:19 Get A/D filter: -9.255963e+061 result=40 13:05:19 Get A/D value=-858993460 result=40 [UTC 2018-12-14 13:05:19] 13:05:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:19 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:19 Aux= 13:05:19 Message to Camera, serial 143438 queued 13:05:56 Received message from Master: op=PointingHead serial=143451 13:05:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:05:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:05:56 Point started: ret=0 13:05:56 point_skyscan result=0 13:05:57 Check angles 13:05:57 SkyScan query 13:05:58 SkyScan query done: ret=0 az=134.58<-8972 ze=36.285<-9581 Statuses=0009 0009 13:05:58 Msec=0 True Az=134.58 Ze=36.285 Az status=0009 Ze status=0009 13:05:58 Check angles 13:05:58 SkyScan query 13:05:59 SkyScan query done: ret=0 az=117.105<-7807 ze=15.375<-10975 Statuses=0009 0009 13:05:59 Msec=750 True Az=117.105 Ze=15.375 Az status=0009 Ze status=0009 13:05:59 Check angles 13:05:59 SkyScan query 13:05:59 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.655<-12377 Statuses=0009 0009 13:05:59 Msec=1500 True Az=99.66 Ze=-5.655 Az status=0009 Ze status=0009 13:05:59 Check angles 13:05:59 SkyScan query 13:06:00 SkyScan query done: ret=0 az=81.765<-5451 ze=-27.105<-13807 Statuses=0009 0009 13:06:00 Msec=2250 True Az=81.765 Ze=-27.105 Az status=0009 Ze status=0009 13:06:00 Check angles 13:06:00 SkyScan query 13:06:01 SkyScan query done: ret=0 az=64.365<-4291 ze=-38.595<-14573 Statuses=0009 0008 13:06:01 Msec=3000 True Az=64.365 Ze=-38.595 Az status=0009 Ze status=0008 13:06:01 Check angles 13:06:01 SkyScan query 13:06:02 SkyScan query done: ret=0 az=46.89<-3126 ze=-38.52<-14568 Statuses=0009 0008 13:06:02 Msec=3750 True Az=46.89 Ze=-38.52 Az status=0009 Ze status=0008 13:06:02 Check angles 13:06:02 SkyScan query 13:06:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:06:02 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:06:02 Message to Master queued w/err=0: serial=143451 error=0 13:06:07 Received message from Master: op=Filter serial=143452 13:06:07 Color wheel filter change from 0 to 0 13:06:07 FLIGetFilterPos err=0 currentPosition=0 13:06:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:07 Filter is already there-color wheel unchanged 13:06:08 Received message from Master: op=Shutter serial=143453 13:06:08 Shutter LASER close 13:06:08 Received message from Camera: op=State serial=143455 13:06:08 GetSingleValue result=40 Value=cccccccc 13:06:08 SkyScan query 13:06:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:06:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:08 Parameters OK 13:06:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:08 Set A/D data flow result=40 13:06:08 Set A/D channel type result=40 13:06:08 Set A/D encoding result=40 13:06:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:08 Set channel filter=0.000000e+000 result=40 13:06:08 Config A/D Result=40 13:06:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:08 Get A/D filter: -9.255963e+061 result=40 13:06:08 Get A/D value=-858993460 result=40 13:06:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:08 Parameters OK 13:06:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:08 Set A/D data flow result=40 13:06:08 Set A/D channel type result=40 13:06:08 Set A/D encoding result=40 13:06:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:08 Set channel filter=0.000000e+000 result=40 13:06:08 Config A/D Result=40 13:06:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:08 Get A/D filter: -9.255963e+061 result=40 13:06:08 Get A/D value=-858993460 result=40 13:06:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:08 Aux= 13:06:08 Message to Camera, serial 143455 queued 13:06:45 Received message from Master: op=PointingHead serial=143468 13:06:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:06:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:06:45 Point started: ret=0 13:06:45 point_skyscan result=0 13:06:46 Check angles 13:06:46 SkyScan query 13:06:47 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.265<-16551 Statuses=0009 0009 13:06:47 Msec=0 True Az=63.915 Ze=-68.265 Az status=0009 Ze status=0009 13:06:47 Check angles 13:06:47 SkyScan query 13:06:47 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.25<-17950 Statuses=0009 0009 13:06:47 Msec=750 True Az=81.39 Ze=-89.25 Az status=0009 Ze status=0009 13:06:48 Check angles 13:06:48 SkyScan query 13:06:48 SkyScan query done: ret=0 az=99.225<-6615 ze=-110.64<-19376 Statuses=0009 0009 13:06:48 Msec=1500 True Az=99.225 Ze=-110.64 Az status=0009 Ze status=0009 13:06:48 Check angles 13:06:48 SkyScan query 13:06:49 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.52<-20768 Statuses=0009 0009 13:06:49 Msec=2250 True Az=116.745 Ze=-131.52 Az status=0009 Ze status=0009 13:06:49 Check angles 13:06:49 SkyScan query 13:06:50 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 13:06:50 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 13:06:50 Check angles 13:06:50 SkyScan query 13:06:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 13:06:50 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 13:06:50 Message to Master queued w/err=0: serial=143468 error=0 13:06:55 Received message from Master: op=Filter serial=143469 13:06:55 Color wheel filter change from 0 to 0 13:06:55 FLIGetFilterPos err=0 currentPosition=0 13:06:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:55 Filter is already there-color wheel unchanged 13:06:56 Received message from Master: op=Shutter serial=143470 13:06:56 Shutter LASER close 13:06:56 Received message from Camera: op=State serial=143472 13:06:56 GetSingleValue result=40 Value=cccccccc 13:06:56 SkyScan query 13:06:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:06:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:56 Parameters OK 13:06:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:56 Set A/D data flow result=40 13:06:56 Set A/D channel type result=40 13:06:56 Set A/D encoding result=40 13:06:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:56 Set channel filter=0.000000e+000 result=40 13:06:56 Config A/D Result=40 13:06:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:56 Get A/D filter: -9.255963e+061 result=40 13:06:56 Get A/D value=-858993460 result=40 13:06:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:56 Parameters OK 13:06:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:56 Set A/D data flow result=40 13:06:56 Set A/D channel type result=40 13:06:56 Set A/D encoding result=40 13:06:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:56 Set channel filter=0.000000e+000 result=40 13:06:56 Config A/D Result=40 13:06:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:56 Get A/D filter: -9.255963e+061 result=40 13:06:56 Get A/D value=-858993460 result=40 13:06:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:56 Aux= 13:06:56 Message to Camera, serial 143472 queued 13:07:33 Received message from Master: op=PointingHead serial=143485 13:07:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:07:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:07:33 Point started: ret=0 13:07:33 point_skyscan result=0 13:07:34 Check angles 13:07:34 SkyScan query 13:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.39<-23426 Statuses=0009 0009 13:07:35 Msec=0 True Az=112.995 Ze=-171.39 Az status=0009 Ze status=0009 13:07:35 Check angles 13:07:35 SkyScan query 13:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:07:35 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:07:35 Message to Master queued w/err=0: serial=143485 error=0 13:07:40 Received message from Master: op=Filter serial=143486 13:07:40 Color wheel filter change from 0 to 0 13:07:40 FLIGetFilterPos err=0 currentPosition=0 13:07:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:40 Filter is already there-color wheel unchanged 13:07:41 Received message from Master: op=Shutter serial=143487 13:07:41 Shutter LASER open 13:07:41 Received message from Camera: op=State serial=143489 13:07:41 GetSingleValue result=40 Value=cccccccc 13:07:41 SkyScan query 13:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:07:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:41 Parameters OK 13:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:41 Set A/D data flow result=40 13:07:41 Set A/D channel type result=40 13:07:41 Set A/D encoding result=40 13:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:41 Set channel filter=0.000000e+000 result=40 13:07:41 Config A/D Result=40 13:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:41 Get A/D filter: -9.255963e+061 result=40 13:07:41 Get A/D value=-858993460 result=40 13:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:41 Parameters OK 13:07:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:41 Set A/D data flow result=40 13:07:41 Set A/D channel type result=40 13:07:41 Set A/D encoding result=40 13:07:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:41 Set channel filter=0.000000e+000 result=40 13:07:41 Config A/D Result=40 13:07:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:41 Get A/D filter: -9.255963e+061 result=40 13:07:41 Get A/D value=-858993460 result=40 13:07:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:41 Aux= 13:07:41 Message to Camera, serial 143489 queued 13:07:50 Received message from Master: op=Shutter serial=143499 13:07:50 Shutter LASER close 13:07:50 Received message from Master: op=PointingHead serial=143503 13:07:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:07:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:07:51 Point started: ret=0 13:07:51 point_skyscan result=0 13:07:52 Check angles 13:07:52 SkyScan query 13:07:52 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.92<-21528 Statuses=0009 0009 13:07:52 Msec=0 True Az=136.365 Ze=-142.92 Az status=0009 Ze status=0009 13:07:52 Check angles 13:07:52 SkyScan query 13:07:53 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.92<-20128 Statuses=0009 0009 13:07:53 Msec=750 True Az=153.78 Ze=-121.92 Az status=0009 Ze status=0009 13:07:53 Check angles 13:07:53 SkyScan query 13:07:54 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.935<-18729 Statuses=0009 0009 13:07:54 Msec=1500 True Az=171.24 Ze=-100.935 Az status=0009 Ze status=0009 13:07:54 Check angles 13:07:54 SkyScan query 13:07:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.545<-17303 Statuses=0008 0009 13:07:54 Msec=2250 True Az=176.01 Ze=-79.545 Az status=0008 Ze status=0009 13:07:55 Check angles 13:07:55 SkyScan query 13:07:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 13:07:55 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 13:07:55 Check angles 13:07:55 SkyScan query 13:07:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:07:56 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:07:56 Message to Master queued w/err=0: serial=143503 error=0 13:08:01 Received message from Master: op=Filter serial=143504 13:08:01 Color wheel filter change from 0 to 0 13:08:01 FLIGetFilterPos err=0 currentPosition=0 13:08:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:01 Filter is already there-color wheel unchanged 13:08:01 Received message from Master: op=Shutter serial=143505 13:08:01 Shutter LASER close 13:08:01 Received message from Camera: op=State serial=143507 13:08:01 GetSingleValue result=40 Value=cccccccc 13:08:01 SkyScan query 13:08:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:08:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:02 Parameters OK 13:08:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:02 Set A/D data flow result=40 13:08:02 Set A/D channel type result=40 13:08:02 Set A/D encoding result=40 13:08:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:02 Set channel filter=0.000000e+000 result=40 13:08:02 Config A/D Result=40 13:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:02 Get A/D filter: -9.255963e+061 result=40 13:08:02 Get A/D value=-858993460 result=40 13:08:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:02 Parameters OK 13:08:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:02 Set A/D data flow result=40 13:08:02 Set A/D channel type result=40 13:08:02 Set A/D encoding result=40 13:08:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:02 Set channel filter=0.000000e+000 result=40 13:08:02 Config A/D Result=40 13:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:02 Get A/D filter: -9.255963e+061 result=40 13:08:02 Get A/D value=-858993460 result=40 13:08:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:02 Aux= 13:08:02 Message to Camera, serial 143507 queued 13:08:39 Received message from Master: op=PointingHead serial=143520 13:08:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:08:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:08:39 Point started: ret=0 13:08:39 point_skyscan result=0 13:08:40 Check angles 13:08:40 SkyScan query 13:08:40 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.675<-13445 Statuses=0009 0009 13:08:40 Msec=0 True Az=152.955 Ze=-21.675 Az status=0009 Ze status=0009 13:08:41 Check angles 13:08:41 SkyScan query 13:08:41 SkyScan query done: ret=0 az=135.06<-9004 ze=-0.24<-12016 Statuses=0009 0009 13:08:41 Msec=750 True Az=135.06 Ze=-0.24 Az status=0009 Ze status=0009 13:08:41 Check angles 13:08:41 SkyScan query 13:08:42 SkyScan query done: ret=0 az=117.27<-7818 ze=21.15<-10590 Statuses=0009 0009 13:08:42 Msec=1500 True Az=117.27 Ze=21.15 Az status=0009 Ze status=0009 13:08:42 Check angles 13:08:42 SkyScan query 13:08:43 SkyScan query done: ret=0 az=99.72<-6648 ze=42.06<-9196 Statuses=0009 0009 13:08:43 Msec=2250 True Az=99.72 Ze=42.06 Az status=0009 Ze status=0009 13:08:43 Check angles 13:08:43 SkyScan query 13:08:43 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:08:43 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:08:44 Check angles 13:08:44 SkyScan query 13:08:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:08:44 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:08:44 Message to Master queued w/err=0: serial=143520 error=0 13:08:49 Received message from Master: op=Filter serial=143521 13:08:49 Color wheel filter change from 0 to 0 13:08:49 FLIGetFilterPos err=0 currentPosition=0 13:08:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:49 Filter is already there-color wheel unchanged 13:08:49 Received message from Master: op=Shutter serial=143522 13:08:49 Shutter LASER close 13:08:49 Received message from Camera: op=State serial=143524 13:08:49 GetSingleValue result=40 Value=cccccccc 13:08:49 SkyScan query 13:08:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:08:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:50 Parameters OK 13:08:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:50 Set A/D data flow result=40 13:08:50 Set A/D channel type result=40 13:08:50 Set A/D encoding result=40 13:08:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:50 Set channel filter=0.000000e+000 result=40 13:08:50 Config A/D Result=40 13:08:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:50 Get A/D filter: -9.255963e+061 result=40 13:08:50 Get A/D value=-858993460 result=40 13:08:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:50 Parameters OK 13:08:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:50 Set A/D data flow result=40 13:08:50 Set A/D channel type result=40 13:08:50 Set A/D encoding result=40 13:08:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:50 Set channel filter=0.000000e+000 result=40 13:08:50 Config A/D Result=40 13:08:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:50 Get A/D filter: -9.255963e+061 result=40 13:08:50 Get A/D value=-858993460 result=40 13:08:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:50 Aux= 13:08:50 Message to Camera, serial 143524 queued 13:09:27 Received message from Master: op=PointingHead serial=143537 13:09:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:09:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:09:27 Point started: ret=0 13:09:27 point_skyscan result=0 13:09:28 Check angles 13:09:28 SkyScan query 13:09:28 SkyScan query done: ret=0 az=109.17<-7278 ze=38.475<-9435 Statuses=0009 0008 13:09:28 Msec=0 True Az=109.17 Ze=38.475 Az status=0009 Ze status=0008 13:09:29 Check angles 13:09:29 SkyScan query 13:09:29 SkyScan query done: ret=0 az=126.645<-8443 ze=38.505<-9433 Statuses=0009 0008 13:09:29 Msec=750 True Az=126.645 Ze=38.505 Az status=0009 Ze status=0008 13:09:29 Check angles 13:09:29 SkyScan query 13:09:30 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 13:09:30 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 13:09:30 Check angles 13:09:30 SkyScan query 13:09:31 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 13:09:31 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 13:09:31 Check angles 13:09:31 SkyScan query 13:09:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:09:31 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:09:32 Check angles 13:09:32 SkyScan query 13:09:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:09:32 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:09:32 Message to Master queued w/err=0: serial=143537 error=0 13:09:37 Received message from Master: op=Filter serial=143538 13:09:37 Color wheel filter change from 0 to 0 13:09:37 FLIGetFilterPos err=0 currentPosition=0 13:09:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:37 Filter is already there-color wheel unchanged 13:09:37 Received message from Master: op=Shutter serial=143539 13:09:37 Shutter LASER close 13:09:37 Received message from Camera: op=State serial=143541 13:09:37 GetSingleValue result=40 Value=cccccccc 13:09:37 SkyScan query 13:09:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:09:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:38 Parameters OK 13:09:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:38 Set A/D data flow result=40 13:09:38 Set A/D channel type result=40 13:09:38 Set A/D encoding result=40 13:09:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:38 Set channel filter=0.000000e+000 result=40 13:09:38 Config A/D Result=40 13:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:38 Get A/D filter: -9.255963e+061 result=40 13:09:38 Get A/D value=-858993460 result=40 13:09:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:38 Parameters OK 13:09:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:38 Set A/D data flow result=40 13:09:38 Set A/D channel type result=40 13:09:38 Set A/D encoding result=40 13:09:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:38 Set channel filter=0.000000e+000 result=40 13:09:38 Config A/D Result=40 13:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:38 Get A/D filter: -9.255963e+061 result=40 13:09:38 Get A/D value=-858993460 result=40 13:09:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:38 Aux= 13:09:38 Message to Camera, serial 143541 queued 13:10:14 Received message from Master: op=PointingHead serial=143553 13:10:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:10:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:10:14 Point started: ret=0 13:10:14 point_skyscan result=0 13:10:15 Check angles 13:10:15 SkyScan query 13:10:16 SkyScan query done: ret=0 az=152.76<-10184 ze=8.37<-11442 Statuses=0009 0009 13:10:16 Msec=0 True Az=152.76 Ze=8.37 Az status=0009 Ze status=0009 13:10:16 Check angles 13:10:16 SkyScan query 13:10:16 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.51<-12834 Statuses=0009 0009 13:10:16 Msec=750 True Az=135.36 Ze=-12.51 Az status=0009 Ze status=0009 13:10:17 Check angles 13:10:17 SkyScan query 13:10:17 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.96<-14264 Statuses=0009 0009 13:10:17 Msec=1500 True Az=117.54 Ze=-33.96 Az status=0009 Ze status=0009 13:10:17 Check angles 13:10:17 SkyScan query 13:10:18 SkyScan query done: ret=0 az=100.08<-6672 ze=-51.57<-15438 Statuses=0009 0009 13:10:18 Msec=2250 True Az=100.08 Ze=-51.57 Az status=0009 Ze status=0009 13:10:18 Check angles 13:10:18 SkyScan query 13:10:19 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 13:10:19 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 13:10:19 Check angles 13:10:19 SkyScan query 13:10:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:10:19 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:10:19 Message to Master queued w/err=0: serial=143553 error=0 13:10:24 Received message from Master: op=Filter serial=143554 13:10:24 Color wheel filter change from 0 to 0 13:10:24 FLIGetFilterPos err=0 currentPosition=0 13:10:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:24 Filter is already there-color wheel unchanged 13:10:25 Received message from Master: op=Shutter serial=143555 13:10:25 Shutter LASER close 13:10:25 Received message from Camera: op=State serial=143557 13:10:25 GetSingleValue result=40 Value=cccccccc 13:10:25 SkyScan query 13:10:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:10:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:25 Parameters OK 13:10:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:25 Set A/D data flow result=40 13:10:25 Set A/D channel type result=40 13:10:25 Set A/D encoding result=40 13:10:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:25 Set channel filter=0.000000e+000 result=40 13:10:25 Config A/D Result=40 13:10:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:25 Get A/D filter: -9.255963e+061 result=40 13:10:25 Get A/D value=-858993460 result=40 13:10:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:25 Parameters OK 13:10:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:25 Set A/D data flow result=40 13:10:25 Set A/D channel type result=40 13:10:25 Set A/D encoding result=40 13:10:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:25 Set channel filter=0.000000e+000 result=40 13:10:25 Config A/D Result=40 13:10:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:25 Get A/D filter: -9.255963e+061 result=40 13:10:25 Get A/D value=-858993460 result=40 13:10:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:25 Aux= 13:10:25 Message to Camera, serial 143557 queued 13:11:02 Received message from Master: op=PointingHead serial=143570 13:11:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:11:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:11:02 Point started: ret=0 13:11:02 point_skyscan result=0 13:11:03 Check angles 13:11:03 SkyScan query 13:11:04 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.495<-17433 Statuses=0009 0009 13:11:04 Msec=0 True Az=109.17 Ze=-81.495 Az status=0009 Ze status=0009 13:11:04 Check angles 13:11:04 SkyScan query 13:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.9<-18860 Statuses=0008 0009 13:11:04 Msec=750 True Az=112.995 Ze=-102.9 Az status=0008 Ze status=0009 13:11:05 Check angles 13:11:05 SkyScan query 13:11:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 13:11:05 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 13:11:05 Check angles 13:11:05 SkyScan query 13:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.765<-21651 Statuses=0008 0009 13:11:06 Msec=2250 True Az=112.995 Ze=-144.765 Az status=0008 Ze status=0009 13:11:06 Check angles 13:11:06 SkyScan query 13:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.705<-23047 Statuses=0008 0009 13:11:07 Msec=3000 True Az=112.995 Ze=-165.705 Az status=0008 Ze status=0009 13:11:07 Check angles 13:11:07 SkyScan query 13:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 13:11:07 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 13:11:07 Message to Master queued w/err=0: serial=143570 error=0 13:11:12 Received message from Master: op=Filter serial=143571 13:11:12 Color wheel filter change from 0 to 0 13:11:12 FLIGetFilterPos err=0 currentPosition=0 13:11:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:12 Filter is already there-color wheel unchanged 13:11:13 Received message from Master: op=Shutter serial=143572 13:11:13 Shutter LASER open 13:11:13 Received message from Camera: op=State serial=143574 13:11:13 GetSingleValue result=40 Value=cccccccc 13:11:13 SkyScan query 13:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:11:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:13 Parameters OK 13:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:13 Set A/D data flow result=40 13:11:13 Set A/D channel type result=40 13:11:13 Set A/D encoding result=40 13:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:13 Set channel filter=0.000000e+000 result=40 13:11:13 Config A/D Result=40 13:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:13 Get A/D filter: -9.255963e+061 result=40 13:11:13 Get A/D value=-858993460 result=40 13:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:13 Parameters OK 13:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:13 Set A/D data flow result=40 13:11:13 Set A/D channel type result=40 13:11:13 Set A/D encoding result=40 13:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:13 Set channel filter=0.000000e+000 result=40 13:11:13 Config A/D Result=40 13:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:13 Get A/D filter: -9.255963e+061 result=40 13:11:13 Get A/D value=-858993460 result=40 13:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:13 Aux= 13:11:13 Message to Camera, serial 143574 queued 13:11:22 Received message from Master: op=Shutter serial=143584 13:11:22 Shutter LASER close 13:11:22 Received message from Master: op=PointingHead serial=143588 13:11:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:11:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:11:23 Point started: ret=0 13:11:23 point_skyscan result=0 13:11:23 Check angles 13:11:23 SkyScan query 13:11:24 SkyScan query done: ret=0 az=89.82<-5988 ze=157.395<-1507 Statuses=0009 0009 13:11:24 Msec=0 True Az=89.82 Ze=157.395 Az status=0009 Ze status=0009 13:11:24 Check angles 13:11:24 SkyScan query 13:11:25 SkyScan query done: ret=0 az=72.03<-4802 ze=135.96<-2936 Statuses=0009 0009 13:11:25 Msec=750 True Az=72.03 Ze=135.96 Az status=0009 Ze status=0009 13:11:25 Check angles 13:11:25 SkyScan query 13:11:25 SkyScan query done: ret=0 az=54.3<-3620 ze=114.54<-4364 Statuses=0009 0009 13:11:25 Msec=1500 True Az=54.3 Ze=114.54 Az status=0009 Ze status=0009 13:11:26 Check angles 13:11:26 SkyScan query 13:11:26 SkyScan query done: ret=0 az=40.995<-2733 ze=93.63<-5758 Statuses=0009 0009 13:11:26 Msec=2250 True Az=40.995 Ze=93.63 Az status=0009 Ze status=0009 13:11:26 Check angles 13:11:26 SkyScan query 13:11:27 SkyScan query done: ret=0 az=40.995<-2733 ze=72.66<-7156 Statuses=0008 0009 13:11:27 Msec=3000 True Az=40.995 Ze=72.66 Az status=0008 Ze status=0009 13:11:27 Check angles 13:11:27 SkyScan query 13:11:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 13:11:28 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 13:11:28 Check angles 13:11:28 SkyScan query 13:11:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:11:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:11:28 Message to Master queued w/err=0: serial=143588 error=0 13:11:33 Received message from Master: op=Filter serial=143589 13:11:33 Color wheel filter change from 0 to 0 13:11:33 FLIGetFilterPos err=0 currentPosition=0 13:11:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:33 Filter is already there-color wheel unchanged 13:11:34 Received message from Master: op=Shutter serial=143590 13:11:34 Shutter LASER close 13:11:34 Received message from Camera: op=State serial=143592 13:11:34 GetSingleValue result=40 Value=cccccccc 13:11:34 SkyScan query 13:11:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:11:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:34 Parameters OK 13:11:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:34 Set A/D data flow result=40 13:11:34 Set A/D channel type result=40 13:11:34 Set A/D encoding result=40 13:11:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:34 Set channel filter=0.000000e+000 result=40 13:11:34 Config A/D Result=40 13:11:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:34 Get A/D filter: -9.255963e+061 result=40 13:11:34 Get A/D value=-858993460 result=40 13:11:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:34 Parameters OK 13:11:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:34 Set A/D data flow result=40 13:11:34 Set A/D channel type result=40 13:11:34 Set A/D encoding result=40 13:11:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:34 Set channel filter=0.000000e+000 result=40 13:11:34 Config A/D Result=40 13:11:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:34 Get A/D filter: -9.255963e+061 result=40 13:11:34 Get A/D value=-858993460 result=40 13:11:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:34 Aux= 13:11:34 Message to Camera, serial 143592 queued 13:12:11 Received message from Master: op=PointingHead serial=143605 13:12:11 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:12:11 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:12:12 Point started: ret=0 13:12:12 point_skyscan result=0 13:12:12 Check angles 13:12:12 SkyScan query 13:12:13 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 13:12:13 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 13:12:13 Check angles 13:12:13 SkyScan query 13:12:14 SkyScan query done: ret=0 az=81.33<-5422 ze=66.525<-7565 Statuses=0009 0008 13:12:14 Msec=750 True Az=81.33 Ze=66.525 Az status=0009 Ze status=0008 13:12:14 Check angles 13:12:14 SkyScan query 13:12:14 SkyScan query done: ret=0 az=99.195<-6613 ze=66.51<-7566 Statuses=0009 0008 13:12:14 Msec=1500 True Az=99.195 Ze=66.51 Az status=0009 Ze status=0008 13:12:15 Check angles 13:12:15 SkyScan query 13:12:15 SkyScan query done: ret=0 az=116.64<-7776 ze=66.51<-7566 Statuses=0009 0008 13:12:15 Msec=2250 True Az=116.64 Ze=66.51 Az status=0009 Ze status=0008 13:12:15 Check angles 13:12:15 SkyScan query 13:12:16 SkyScan query done: ret=0 az=134.085<-8939 ze=66.51<-7566 Statuses=0009 0008 13:12:16 Msec=3000 True Az=134.085 Ze=66.51 Az status=0009 Ze status=0008 13:12:16 Check angles 13:12:16 SkyScan query 13:12:17 SkyScan query done: ret=0 az=151.47<-10098 ze=66.51<-7566 Statuses=0009 0008 13:12:17 Msec=3750 True Az=151.47 Ze=66.51 Az status=0009 Ze status=0008 13:12:17 Check angles 13:12:17 SkyScan query 13:12:17 SkyScan query done: ret=0 az=158.01<-10534 ze=66.51<-7566 Statuses=0008 0008 13:12:17 Msec=4500 True Az=158.01 Ze=66.51 Az status=0008 Ze status=0008 13:12:17 Message to Master queued w/err=0: serial=143605 error=0 13:12:22 Received message from Master: op=Filter serial=143606 13:12:22 Color wheel filter change from 0 to 0 13:12:22 FLIGetFilterPos err=0 currentPosition=0 13:12:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:22 Filter is already there-color wheel unchanged 13:12:23 Received message from Master: op=Shutter serial=143607 13:12:23 Shutter LASER close 13:12:23 Received message from Camera: op=State serial=143609 13:12:23 GetSingleValue result=40 Value=cccccccc 13:12:23 SkyScan query 13:12:23 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 13:12:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:23 Parameters OK 13:12:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:23 Set A/D data flow result=40 13:12:23 Set A/D channel type result=40 13:12:23 Set A/D encoding result=40 13:12:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:23 Set channel filter=0.000000e+000 result=40 13:12:23 Config A/D Result=40 13:12:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:23 Get A/D filter: -9.255963e+061 result=40 13:12:23 Get A/D value=-858993460 result=40 13:12:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:23 Parameters OK 13:12:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:23 Set A/D data flow result=40 13:12:23 Set A/D channel type result=40 13:12:23 Set A/D encoding result=40 13:12:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:23 Set channel filter=0.000000e+000 result=40 13:12:23 Config A/D Result=40 13:12:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:23 Get A/D filter: -9.255963e+061 result=40 13:12:23 Get A/D value=-858993460 result=40 13:12:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:23 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:23 Aux= 13:12:23 Message to Camera, serial 143609 queued 13:13:00 Received message from Master: op=PointingHead serial=143622 13:13:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:13:00 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:13:00 Point started: ret=0 13:13:00 point_skyscan result=0 13:13:01 Check angles 13:13:01 SkyScan query 13:13:02 SkyScan query done: ret=0 az=135.09<-9006 ze=36.645<-9557 Statuses=0009 0009 13:13:02 Msec=0 True Az=135.09 Ze=36.645 Az status=0009 Ze status=0009 13:13:02 Check angles 13:13:02 SkyScan query 13:13:02 SkyScan query done: ret=0 az=117.66<-7844 ze=15.87<-10942 Statuses=0009 0009 13:13:02 Msec=750 True Az=117.66 Ze=15.87 Az status=0009 Ze status=0009 13:13:03 Check angles 13:13:03 SkyScan query 13:13:03 SkyScan query done: ret=0 az=100.215<-6681 ze=-5.085<-12339 Statuses=0009 0009 13:13:03 Msec=1500 True Az=100.215 Ze=-5.085 Az status=0009 Ze status=0009 13:13:03 Check angles 13:13:03 SkyScan query 13:13:04 SkyScan query done: ret=0 az=82.71<-5514 ze=-26.04<-13736 Statuses=0009 0009 13:13:04 Msec=2250 True Az=82.71 Ze=-26.04 Az status=0009 Ze status=0009 13:13:04 Check angles 13:13:04 SkyScan query 13:13:05 SkyScan query done: ret=0 az=64.89<-4326 ze=-38.58<-14572 Statuses=0009 0008 13:13:05 Msec=3000 True Az=64.89 Ze=-38.58 Az status=0009 Ze status=0008 13:13:05 Check angles 13:13:05 SkyScan query 13:13:05 SkyScan query done: ret=0 az=47.055<-3137 ze=-38.52<-14568 Statuses=0009 0008 13:13:05 Msec=3750 True Az=47.055 Ze=-38.52 Az status=0009 Ze status=0008 13:13:06 Check angles 13:13:06 SkyScan query 13:13:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:13:06 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:13:06 Message to Master queued w/err=0: serial=143622 error=0 13:13:11 Received message from Master: op=Filter serial=143623 13:13:11 Color wheel filter change from 0 to 0 13:13:11 FLIGetFilterPos err=0 currentPosition=0 13:13:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:11 Filter is already there-color wheel unchanged 13:13:11 Received message from Master: op=Shutter serial=143624 13:13:11 Shutter LASER close 13:13:11 Received message from Camera: op=State serial=143626 13:13:11 GetSingleValue result=40 Value=cccccccc 13:13:11 SkyScan query 13:13:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:13:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:12 Parameters OK 13:13:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:12 Set A/D data flow result=40 13:13:12 Set A/D channel type result=40 13:13:12 Set A/D encoding result=40 13:13:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:12 Set channel filter=0.000000e+000 result=40 13:13:12 Config A/D Result=40 13:13:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:12 Get A/D filter: -9.255963e+061 result=40 13:13:12 Get A/D value=-858993460 result=40 13:13:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:12 Parameters OK 13:13:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:12 Set A/D data flow result=40 13:13:12 Set A/D channel type result=40 13:13:12 Set A/D encoding result=40 13:13:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:12 Set channel filter=0.000000e+000 result=40 13:13:12 Config A/D Result=40 13:13:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:12 Get A/D filter: -9.255963e+061 result=40 13:13:12 Get A/D value=-858993460 result=40 13:13:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:12 Aux= 13:13:12 Message to Camera, serial 143626 queued 13:13:48 Received message from Master: op=PointingHead serial=143638 13:13:48 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:13:48 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:13:48 Point started: ret=0 13:13:48 point_skyscan result=0 13:13:49 Check angles 13:13:49 SkyScan query 13:13:50 SkyScan query done: ret=0 az=64.38<-4292 ze=-68.82<-16588 Statuses=0009 0009 13:13:50 Msec=0 True Az=64.38 Ze=-68.82 Az status=0009 Ze status=0009 13:13:50 Check angles 13:13:50 SkyScan query 13:13:50 SkyScan query done: ret=0 az=82.26<-5484 ze=-90.165<-18011 Statuses=0009 0009 13:13:50 Msec=750 True Az=82.26 Ze=-90.165 Az status=0009 Ze status=0009 13:13:51 Check angles 13:13:51 SkyScan query 13:13:51 SkyScan query done: ret=0 az=99.69<-6646 ze=-111.12<-19408 Statuses=0009 0009 13:13:51 Msec=1500 True Az=99.69 Ze=-111.12 Az status=0009 Ze status=0009 13:13:51 Check angles 13:13:51 SkyScan query 13:13:52 SkyScan query done: ret=0 az=117.69<-7846 ze=-132.525<-20835 Statuses=0009 0009 13:13:52 Msec=2250 True Az=117.69 Ze=-132.525 Az status=0009 Ze status=0009 13:13:52 Check angles 13:13:52 SkyScan query 13:13:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 13:13:53 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 13:13:53 Check angles 13:13:53 SkyScan query 13:13:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 13:13:53 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 13:13:53 Message to Master queued w/err=0: serial=143638 error=0 13:13:58 Received message from Master: op=Filter serial=143639 13:13:58 Color wheel filter change from 0 to 0 13:13:58 FLIGetFilterPos err=0 currentPosition=0 13:13:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:58 Filter is already there-color wheel unchanged 13:13:59 Received message from Master: op=Shutter serial=143640 13:13:59 Shutter LASER close 13:13:59 Received message from Camera: op=State serial=143642 13:13:59 GetSingleValue result=40 Value=cccccccc 13:13:59 SkyScan query 13:13:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:13:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:59 Parameters OK 13:13:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:59 Set A/D data flow result=40 13:13:59 Set A/D channel type result=40 13:13:59 Set A/D encoding result=40 13:13:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:59 Set channel filter=0.000000e+000 result=40 13:13:59 Config A/D Result=40 13:13:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:59 Get A/D filter: -9.255963e+061 result=40 13:13:59 Get A/D value=-858993460 result=40 13:13:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:59 Parameters OK 13:13:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:59 Set A/D data flow result=40 13:13:59 Set A/D channel type result=40 13:13:59 Set A/D encoding result=40 13:13:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:59 Set channel filter=0.000000e+000 result=40 13:13:59 Config A/D Result=40 13:13:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:59 Get A/D filter: -9.255963e+061 result=40 13:13:59 Get A/D value=-858993460 result=40 13:13:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:59 Aux= 13:13:59 Message to Camera, serial 143642 queued 13:14:36 Received message from Master: op=PointingHead serial=143655 13:14:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:14:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:14:36 Point started: ret=0 13:14:36 point_skyscan result=0 13:14:37 Check angles 13:14:37 SkyScan query 13:14:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.375<-23425 Statuses=0009 0009 13:14:38 Msec=0 True Az=112.995 Ze=-171.375 Az status=0009 Ze status=0009 13:14:38 Check angles 13:14:38 SkyScan query 13:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:14:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:14:39 Message to Master queued w/err=0: serial=143655 error=0 13:14:44 Received message from Master: op=Filter serial=143656 13:14:44 Color wheel filter change from 0 to 0 13:14:44 FLIGetFilterPos err=0 currentPosition=0 13:14:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:44 Filter is already there-color wheel unchanged 13:14:44 Received message from Master: op=Shutter serial=143657 13:14:44 Shutter LASER open 13:14:44 Received message from Camera: op=State serial=143659 13:14:44 GetSingleValue result=40 Value=cccccccc 13:14:44 SkyScan query 13:14:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:14:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:44 Parameters OK 13:14:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:44 Set A/D data flow result=40 13:14:44 Set A/D channel type result=40 13:14:44 Set A/D encoding result=40 13:14:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:44 Set channel filter=0.000000e+000 result=40 13:14:44 Config A/D Result=40 13:14:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:44 Get A/D filter: -9.255963e+061 result=40 13:14:44 Get A/D value=-858993460 result=40 13:14:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:44 Parameters OK 13:14:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:44 Set A/D data flow result=40 13:14:44 Set A/D channel type result=40 13:14:44 Set A/D encoding result=40 13:14:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:44 Set channel filter=0.000000e+000 result=40 13:14:44 Config A/D Result=40 13:14:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:44 Get A/D filter: -9.255963e+061 result=40 13:14:44 Get A/D value=-858993460 result=40 13:14:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:44 Aux= 13:14:44 Message to Camera, serial 143659 queued 13:14:53 Received message from Master: op=Shutter serial=143669 13:14:53 Shutter LASER close 13:14:53 Received message from Master: op=PointingHead serial=143673 13:14:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:14:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:14:54 Point started: ret=0 13:14:54 point_skyscan result=0 13:14:55 Check angles 13:14:55 SkyScan query 13:14:55 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.415<-21561 Statuses=0009 0009 13:14:55 Msec=0 True Az=135.825 Ze=-143.415 Az status=0009 Ze status=0009 13:14:55 Check angles 13:14:55 SkyScan query 13:14:56 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.415<-20161 Statuses=0009 0009 13:14:56 Msec=750 True Az=153.36 Ze=-122.415 Az status=0009 Ze status=0009 13:14:56 Check angles 13:14:56 SkyScan query 13:14:57 SkyScan query done: ret=0 az=170.85<-11390 ze=-101.52<-18768 Statuses=0009 0009 13:14:57 Msec=1500 True Az=170.85 Ze=-101.52 Az status=0009 Ze status=0009 13:14:57 Check angles 13:14:57 SkyScan query 13:14:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.535<-17369 Statuses=0008 0009 13:14:57 Msec=2250 True Az=176.01 Ze=-80.535 Az status=0008 Ze status=0009 13:14:58 Check angles 13:14:58 SkyScan query 13:14:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.145<-15943 Statuses=0008 0009 13:14:58 Msec=3000 True Az=176.01 Ze=-59.145 Az status=0008 Ze status=0009 13:14:58 Check angles 13:14:58 SkyScan query 13:14:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:14:59 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:14:59 Message to Master queued w/err=0: serial=143673 error=0 13:15:04 Received message from Master: op=Filter serial=143674 13:15:04 Color wheel filter change from 0 to 0 13:15:04 FLIGetFilterPos err=0 currentPosition=0 13:15:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:04 Filter is already there-color wheel unchanged 13:15:04 Received message from Master: op=Shutter serial=143675 13:15:04 Shutter LASER close 13:15:04 Received message from Camera: op=State serial=143677 13:15:04 GetSingleValue result=40 Value=cccccccc 13:15:04 SkyScan query 13:15:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:15:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:05 Parameters OK 13:15:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:05 Set A/D data flow result=40 13:15:05 Set A/D channel type result=40 13:15:05 Set A/D encoding result=40 13:15:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:05 Set channel filter=0.000000e+000 result=40 13:15:05 Config A/D Result=40 13:15:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:05 Get A/D filter: -9.255963e+061 result=40 13:15:05 Get A/D value=-858993460 result=40 13:15:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:05 Parameters OK 13:15:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:05 Set A/D data flow result=40 13:15:05 Set A/D channel type result=40 13:15:05 Set A/D encoding result=40 13:15:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:05 Set channel filter=0.000000e+000 result=40 13:15:05 Config A/D Result=40 13:15:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:05 Get A/D filter: -9.255963e+061 result=40 13:15:05 Get A/D value=-858993460 result=40 13:15:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:05 Aux= 13:15:05 Message to Camera, serial 143677 queued 13:15:27 Received message from Master: op=Identify serial=143678 13:15:42 Received message from Master: op=PointingHead serial=143693 13:15:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:15:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:15:42 Point started: ret=0 13:15:42 point_skyscan result=0 13:15:43 Check angles 13:15:43 SkyScan query 13:15:43 SkyScan query done: ret=0 az=153.075<-10205 ze=-21.825<-13455 Statuses=0009 0009 13:15:43 Msec=0 True Az=153.075 Ze=-21.825 Az status=0009 Ze status=0009 [UTC 2018-12-14 13:15:43] 13:15:43 Check angles 13:15:44 SkyScan query 13:15:44 SkyScan query done: ret=0 az=133.335<-8889 ze=1.815<-11879 Statuses=0009 0009 13:15:44 Msec=750 True Az=133.335 Ze=1.815 Az status=0009 Ze status=0009 13:15:44 Check angles 13:15:44 SkyScan query 13:15:45 SkyScan query done: ret=0 az=117.69<-7846 ze=20.58<-10628 Statuses=0009 0009 13:15:45 Msec=1500 True Az=117.69 Ze=20.58 Az status=0009 Ze status=0009 13:15:45 Check angles 13:15:45 SkyScan query 13:15:46 SkyScan query done: ret=0 az=100.335<-6689 ze=41.55<-9230 Statuses=0009 0009 13:15:46 Msec=2250 True Az=100.335 Ze=41.55 Az status=0009 Ze status=0009 13:15:46 Check angles 13:15:46 SkyScan query 13:15:46 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 13:15:46 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 13:15:46 Check angles 13:15:46 SkyScan query 13:15:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:15:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:15:47 Message to Master queued w/err=0: serial=143693 error=0 13:15:52 Received message from Master: op=Filter serial=143694 13:15:52 Color wheel filter change from 0 to 0 13:15:52 FLIGetFilterPos err=0 currentPosition=0 13:15:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:52 Filter is already there-color wheel unchanged 13:15:52 Received message from Master: op=Shutter serial=143695 13:15:52 Shutter LASER close 13:15:52 Received message from Camera: op=State serial=143697 13:15:52 GetSingleValue result=40 Value=cccccccc 13:15:52 SkyScan query 13:15:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:15:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:53 Parameters OK 13:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:53 Set A/D data flow result=40 13:15:53 Set A/D channel type result=40 13:15:53 Set A/D encoding result=40 13:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:53 Set channel filter=0.000000e+000 result=40 13:15:53 Config A/D Result=40 13:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:53 Get A/D filter: -9.255963e+061 result=40 13:15:53 Get A/D value=-858993460 result=40 13:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:53 Parameters OK 13:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:53 Set A/D data flow result=40 13:15:53 Set A/D channel type result=40 13:15:53 Set A/D encoding result=40 13:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:53 Set channel filter=0.000000e+000 result=40 13:15:53 Config A/D Result=40 13:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:53 Get A/D filter: -9.255963e+061 result=40 13:15:53 Get A/D value=-858993460 result=40 13:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:53 Aux= 13:15:53 Message to Camera, serial 143697 queued [UTC 2018-12-14 13:15:53] 13:16:30 Received message from Master: op=PointingHead serial=143710 13:16:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:16:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:16:30 Point started: ret=0 13:16:30 point_skyscan result=0 13:16:31 Check angles 13:16:31 SkyScan query 13:16:31 SkyScan query done: ret=0 az=109.11<-7274 ze=38.475<-9435 Statuses=0009 0008 13:16:31 Msec=0 True Az=109.11 Ze=38.475 Az status=0009 Ze status=0008 13:16:32 Check angles 13:16:32 SkyScan query 13:16:32 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 13:16:32 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 13:16:32 Check angles 13:16:32 SkyScan query 13:16:33 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 13:16:33 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 13:16:33 Check angles 13:16:33 SkyScan query 13:16:34 SkyScan query done: ret=0 az=161.46<-10764 ze=38.505<-9433 Statuses=0009 0008 13:16:34 Msec=2250 True Az=161.46 Ze=38.505 Az status=0009 Ze status=0008 13:16:34 Check angles 13:16:34 SkyScan query 13:16:34 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:16:34 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:16:35 Check angles 13:16:35 SkyScan query 13:16:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:16:35 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:16:35 Message to Master queued w/err=0: serial=143710 error=0 13:16:40 Received message from Master: op=Filter serial=143711 13:16:40 Color wheel filter change from 0 to 0 13:16:40 FLIGetFilterPos err=0 currentPosition=0 13:16:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:40 Filter is already there-color wheel unchanged 13:16:40 Received message from Master: op=Shutter serial=143712 13:16:40 Shutter LASER close 13:16:40 Received message from Camera: op=State serial=143714 13:16:40 GetSingleValue result=40 Value=cccccccc 13:16:40 SkyScan query 13:16:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:16:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:41 Parameters OK 13:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:41 Set A/D data flow result=40 13:16:41 Set A/D channel type result=40 13:16:41 Set A/D encoding result=40 13:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:41 Set channel filter=0.000000e+000 result=40 13:16:41 Config A/D Result=40 13:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:41 Get A/D filter: -9.255963e+061 result=40 13:16:41 Get A/D value=-858993460 result=40 13:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:41 Parameters OK 13:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:41 Set A/D data flow result=40 13:16:41 Set A/D channel type result=40 13:16:41 Set A/D encoding result=40 13:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:41 Set channel filter=0.000000e+000 result=40 13:16:41 Config A/D Result=40 13:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:41 Get A/D filter: -9.255963e+061 result=40 13:16:41 Get A/D value=-858993460 result=40 13:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:41 Aux= 13:16:41 Message to Camera, serial 143714 queued 13:17:18 Received message from Master: op=PointingHead serial=143727 13:17:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:17:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:17:18 Point started: ret=0 13:17:18 point_skyscan result=0 13:17:19 Check angles 13:17:19 SkyScan query 13:17:19 SkyScan query done: ret=0 az=152.76<-10184 ze=8.46<-11436 Statuses=0009 0009 13:17:19 Msec=0 True Az=152.76 Ze=8.46 Az status=0009 Ze status=0009 13:17:20 Check angles 13:17:20 SkyScan query 13:17:20 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.45<-12830 Statuses=0009 0009 13:17:20 Msec=750 True Az=135.375 Ze=-12.45 Az status=0009 Ze status=0009 13:17:20 Check angles 13:17:20 SkyScan query 13:17:21 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.45<-14230 Statuses=0009 0009 13:17:21 Msec=1500 True Az=117.795 Ze=-33.45 Az status=0009 Ze status=0009 13:17:21 Check angles 13:17:21 SkyScan query 13:17:22 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.555<-15437 Statuses=0009 0009 13:17:22 Msec=2250 True Az=100.425 Ze=-51.555 Az status=0009 Ze status=0009 13:17:22 Check angles 13:17:22 SkyScan query 13:17:22 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 13:17:22 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 13:17:23 Check angles 13:17:23 SkyScan query 13:17:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:17:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:17:23 Message to Master queued w/err=0: serial=143727 error=0 13:17:28 Received message from Master: op=Filter serial=143728 13:17:28 Color wheel filter change from 0 to 0 13:17:28 FLIGetFilterPos err=0 currentPosition=0 13:17:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:28 Filter is already there-color wheel unchanged 13:17:28 Received message from Master: op=Shutter serial=143729 13:17:28 Shutter LASER close 13:17:28 Received message from Camera: op=State serial=143731 13:17:28 GetSingleValue result=40 Value=cccccccc 13:17:28 SkyScan query 13:17:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:17:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:29 Parameters OK 13:17:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:29 Set A/D data flow result=40 13:17:29 Set A/D channel type result=40 13:17:29 Set A/D encoding result=40 13:17:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:29 Set channel filter=0.000000e+000 result=40 13:17:29 Config A/D Result=40 13:17:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:29 Get A/D filter: -9.255963e+061 result=40 13:17:29 Get A/D value=-858993460 result=40 13:17:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:29 Parameters OK 13:17:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:29 Set A/D data flow result=40 13:17:29 Set A/D channel type result=40 13:17:29 Set A/D encoding result=40 13:17:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:29 Set channel filter=0.000000e+000 result=40 13:17:29 Config A/D Result=40 13:17:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:29 Get A/D filter: -9.255963e+061 result=40 13:17:29 Get A/D value=-858993460 result=40 13:17:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:29 Aux= 13:17:29 Message to Camera, serial 143731 queued 13:18:06 Received message from Master: op=PointingHead serial=143744 13:18:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:18:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:18:06 Point started: ret=0 13:18:06 point_skyscan result=0 13:18:07 Check angles 13:18:07 SkyScan query 13:18:07 SkyScan query done: ret=0 az=108.78<-7252 ze=-81.015<-17401 Statuses=0009 0009 13:18:07 Msec=0 True Az=108.78 Ze=-81.015 Az status=0009 Ze status=0009 13:18:08 Check angles 13:18:08 SkyScan query 13:18:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102<-18800 Statuses=0008 0009 13:18:08 Msec=750 True Az=112.995 Ze=-102 Az status=0008 Ze status=0009 13:18:08 Check angles 13:18:08 SkyScan query 13:18:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 13:18:09 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 13:18:09 Check angles 13:18:09 SkyScan query 13:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 13:18:10 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 13:18:10 Check angles 13:18:10 SkyScan query 13:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.3<-23020 Statuses=0008 0009 13:18:10 Msec=3000 True Az=112.995 Ze=-165.3 Az status=0008 Ze status=0009 13:18:11 Check angles 13:18:11 SkyScan query 13:18:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 13:18:11 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 13:18:11 Message to Master queued w/err=0: serial=143744 error=0 13:18:16 Received message from Master: op=Filter serial=143745 13:18:16 Color wheel filter change from 0 to 0 13:18:16 FLIGetFilterPos err=0 currentPosition=0 13:18:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:16 Filter is already there-color wheel unchanged 13:18:16 Received message from Master: op=Shutter serial=143746 13:18:17 Shutter LASER open 13:18:17 Received message from Camera: op=State serial=143748 13:18:17 GetSingleValue result=40 Value=cccccccc 13:18:17 SkyScan query 13:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:18:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:17 Parameters OK 13:18:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:17 Set A/D data flow result=40 13:18:17 Set A/D channel type result=40 13:18:17 Set A/D encoding result=40 13:18:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:17 Set channel filter=0.000000e+000 result=40 13:18:17 Config A/D Result=40 13:18:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:17 Get A/D filter: -9.255963e+061 result=40 13:18:17 Get A/D value=-858993460 result=40 13:18:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:17 Parameters OK 13:18:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:17 Set A/D data flow result=40 13:18:17 Set A/D channel type result=40 13:18:17 Set A/D encoding result=40 13:18:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:17 Set channel filter=0.000000e+000 result=40 13:18:17 Config A/D Result=40 13:18:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:17 Get A/D filter: -9.255963e+061 result=40 13:18:17 Get A/D value=-858993460 result=40 13:18:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:17 Aux= 13:18:17 Message to Camera, serial 143748 queued 13:18:26 Received message from Master: op=Shutter serial=143758 13:18:26 Shutter LASER close 13:18:26 Received message from Master: op=PointingHead serial=143762 13:18:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:18:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:18:26 Point started: ret=0 13:18:26 point_skyscan result=0 13:18:27 Check angles 13:18:27 SkyScan query 13:18:28 SkyScan query done: ret=0 az=89.55<-5970 ze=156.75<-1550 Statuses=0009 0009 13:18:28 Msec=0 True Az=89.55 Ze=156.75 Az status=0009 Ze status=0009 13:18:28 Check angles 13:18:28 SkyScan query 13:18:29 SkyScan query done: ret=0 az=72.015<-4801 ze=135.795<-2947 Statuses=0009 0009 13:18:29 Msec=750 True Az=72.015 Ze=135.795 Az status=0009 Ze status=0009 13:18:29 Check angles 13:18:29 SkyScan query 13:18:29 SkyScan query done: ret=0 az=54.54<-3636 ze=114.795<-4347 Statuses=0009 0009 13:18:29 Msec=1500 True Az=54.54 Ze=114.795 Az status=0009 Ze status=0009 13:18:29 Check angles 13:18:29 SkyScan query 13:18:30 SkyScan query done: ret=0 az=40.995<-2733 ze=93.45<-5770 Statuses=0009 0009 13:18:30 Msec=2250 True Az=40.995 Ze=93.45 Az status=0009 Ze status=0009 13:18:30 Check angles 13:18:30 SkyScan query 13:18:31 SkyScan query done: ret=0 az=40.98<-2732 ze=72.48<-7168 Statuses=0008 0009 13:18:31 Msec=3000 True Az=40.98 Ze=72.48 Az status=0008 Ze status=0009 13:18:31 Check angles 13:18:31 SkyScan query 13:18:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 13:18:32 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 13:18:32 Check angles 13:18:32 SkyScan query 13:18:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:18:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:18:32 Message to Master queued w/err=0: serial=143762 error=0 13:18:37 Received message from Master: op=Filter serial=143763 13:18:37 Color wheel filter change from 0 to 0 13:18:37 FLIGetFilterPos err=0 currentPosition=0 13:18:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:37 Filter is already there-color wheel unchanged 13:18:37 Received message from Master: op=Shutter serial=143764 13:18:37 Shutter LASER close 13:18:38 Received message from Camera: op=State serial=143766 13:18:38 GetSingleValue result=40 Value=cccccccc 13:18:38 SkyScan query 13:18:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:18:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:38 Parameters OK 13:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:38 Set A/D data flow result=40 13:18:38 Set A/D channel type result=40 13:18:38 Set A/D encoding result=40 13:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:38 Set channel filter=0.000000e+000 result=40 13:18:38 Config A/D Result=40 13:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:38 Get A/D filter: -9.255963e+061 result=40 13:18:38 Get A/D value=-858993460 result=40 13:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:38 Parameters OK 13:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:38 Set A/D data flow result=40 13:18:38 Set A/D channel type result=40 13:18:38 Set A/D encoding result=40 13:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:38 Set channel filter=0.000000e+000 result=40 13:18:38 Config A/D Result=40 13:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:38 Get A/D filter: -9.255963e+061 result=40 13:18:38 Get A/D value=-858993460 result=40 13:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:38 Aux= 13:18:38 Message to Camera, serial 143766 queued 13:19:15 Received message from Master: op=PointingHead serial=143779 13:19:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:19:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:19:15 Point started: ret=0 13:19:15 point_skyscan result=0 13:19:16 Check angles 13:19:16 SkyScan query 13:19:17 SkyScan query done: ret=0 az=64.185<-4279 ze=66.54<-7564 Statuses=0009 0008 13:19:17 Msec=0 True Az=64.185 Ze=66.54 Az status=0009 Ze status=0008 13:19:17 Check angles 13:19:17 SkyScan query 13:19:18 SkyScan query done: ret=0 az=81.765<-5451 ze=66.51<-7566 Statuses=0009 0008 13:19:18 Msec=750 True Az=81.765 Ze=66.51 Az status=0009 Ze status=0008 13:19:18 Check angles 13:19:18 SkyScan query 13:19:18 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 13:19:18 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 13:19:18 Check angles 13:19:18 SkyScan query 13:19:19 SkyScan query done: ret=0 az=116.655<-7777 ze=66.495<-7567 Statuses=0009 0008 13:19:19 Msec=2250 True Az=116.655 Ze=66.495 Az status=0009 Ze status=0008 13:19:19 Check angles 13:19:19 SkyScan query 13:19:20 SkyScan query done: ret=0 az=134.145<-8943 ze=66.495<-7567 Statuses=0009 0008 13:19:20 Msec=3000 True Az=134.145 Ze=66.495 Az status=0009 Ze status=0008 13:19:20 Check angles 13:19:20 SkyScan query 13:19:21 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 13:19:21 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 13:19:21 Check angles 13:19:21 SkyScan query 13:19:21 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 13:19:21 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 13:19:21 Message to Master queued w/err=0: serial=143779 error=0 13:19:26 Received message from Master: op=Filter serial=143780 13:19:26 Color wheel filter change from 0 to 0 13:19:26 FLIGetFilterPos err=0 currentPosition=0 13:19:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:26 Filter is already there-color wheel unchanged 13:19:26 Received message from Master: op=Shutter serial=143781 13:19:26 Shutter LASER close 13:19:26 Received message from Camera: op=State serial=143783 13:19:26 GetSingleValue result=40 Value=cccccccc 13:19:26 SkyScan query 13:19:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:19:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:27 Parameters OK 13:19:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:27 Set A/D data flow result=40 13:19:27 Set A/D channel type result=40 13:19:27 Set A/D encoding result=40 13:19:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:27 Set channel filter=0.000000e+000 result=40 13:19:27 Config A/D Result=40 13:19:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:27 Get A/D filter: -9.255963e+061 result=40 13:19:27 Get A/D value=-858993460 result=40 13:19:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:27 Parameters OK 13:19:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:27 Set A/D data flow result=40 13:19:27 Set A/D channel type result=40 13:19:27 Set A/D encoding result=40 13:19:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:27 Set channel filter=0.000000e+000 result=40 13:19:27 Config A/D Result=40 13:19:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:27 Get A/D filter: -9.255963e+061 result=40 13:19:27 Get A/D value=-858993460 result=40 13:19:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:27 Aux= 13:19:27 Message to Camera, serial 143783 queued 13:20:04 Received message from Master: op=PointingHead serial=143796 13:20:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:20:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:20:04 Point started: ret=0 13:20:04 point_skyscan result=0 13:20:05 Check angles 13:20:05 SkyScan query 13:20:06 SkyScan query done: ret=0 az=134.79<-8986 ze=36.6<-9560 Statuses=0009 0009 13:20:06 Msec=0 True Az=134.79 Ze=36.6 Az status=0009 Ze status=0009 13:20:06 Check angles 13:20:06 SkyScan query 13:20:06 SkyScan query done: ret=0 az=117.045<-7803 ze=15.21<-10986 Statuses=0009 0009 13:20:06 Msec=750 True Az=117.045 Ze=15.21 Az status=0009 Ze status=0009 13:20:06 Check angles 13:20:06 SkyScan query 13:20:07 SkyScan query done: ret=0 az=99.675<-6645 ze=-5.805<-12387 Statuses=0009 0009 13:20:07 Msec=1500 True Az=99.675 Ze=-5.805 Az status=0009 Ze status=0009 13:20:07 Check angles 13:20:07 SkyScan query 13:20:08 SkyScan query done: ret=0 az=82.185<-5479 ze=-26.76<-13784 Statuses=0009 0009 13:20:08 Msec=2250 True Az=82.185 Ze=-26.76 Az status=0009 Ze status=0009 13:20:08 Check angles 13:20:08 SkyScan query 13:20:09 SkyScan query done: ret=0 az=64.665<-4311 ze=-38.58<-14572 Statuses=0009 0008 13:20:09 Msec=3000 True Az=64.665 Ze=-38.58 Az status=0009 Ze status=0008 13:20:09 Check angles 13:20:09 SkyScan query 13:20:09 SkyScan query done: ret=0 az=46.845<-3123 ze=-38.52<-14568 Statuses=0009 0008 13:20:09 Msec=3750 True Az=46.845 Ze=-38.52 Az status=0009 Ze status=0008 13:20:10 Check angles 13:20:10 SkyScan query 13:20:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:20:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:20:10 Message to Master queued w/err=0: serial=143796 error=0 13:20:15 Received message from Master: op=Filter serial=143797 13:20:15 Color wheel filter change from 0 to 0 13:20:15 FLIGetFilterPos err=0 currentPosition=0 13:20:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:15 Filter is already there-color wheel unchanged 13:20:15 Received message from Master: op=Shutter serial=143798 13:20:15 Shutter LASER close 13:20:15 Received message from Camera: op=State serial=143800 13:20:15 GetSingleValue result=40 Value=cccccccc 13:20:15 SkyScan query 13:20:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:20:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:16 Parameters OK 13:20:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:16 Set A/D data flow result=40 13:20:16 Set A/D channel type result=40 13:20:16 Set A/D encoding result=40 13:20:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:16 Set channel filter=0.000000e+000 result=40 13:20:16 Config A/D Result=40 13:20:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:16 Get A/D filter: -9.255963e+061 result=40 13:20:16 Get A/D value=-858993460 result=40 13:20:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:16 Parameters OK 13:20:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:16 Set A/D data flow result=40 13:20:16 Set A/D channel type result=40 13:20:16 Set A/D encoding result=40 13:20:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:16 Set channel filter=0.000000e+000 result=40 13:20:16 Config A/D Result=40 13:20:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:16 Get A/D filter: -9.255963e+061 result=40 13:20:16 Get A/D value=-858993460 result=40 13:20:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:16 Aux= 13:20:16 Message to Camera, serial 143800 queued 13:20:53 Received message from Master: op=PointingHead serial=143813 13:20:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:20:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:20:53 Point started: ret=0 13:20:53 point_skyscan result=0 13:20:54 Check angles 13:20:54 SkyScan query 13:20:54 SkyScan query done: ret=0 az=64.305<-4287 ze=-68.685<-16579 Statuses=0009 0009 13:20:54 Msec=0 True Az=64.305 Ze=-68.685 Az status=0009 Ze status=0009 13:20:55 Check angles 13:20:55 SkyScan query 13:20:55 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.655<-17977 Statuses=0009 0009 13:20:55 Msec=750 True Az=81.81 Ze=-89.655 Az status=0009 Ze status=0009 13:20:55 Check angles 13:20:55 SkyScan query 13:20:56 SkyScan query done: ret=0 az=99.63<-6642 ze=-111.03<-19402 Statuses=0009 0009 13:20:56 Msec=1500 True Az=99.63 Ze=-111.03 Az status=0009 Ze status=0009 13:20:56 Check angles 13:20:56 SkyScan query 13:20:57 SkyScan query done: ret=0 az=117.18<-7812 ze=-131.94<-20796 Statuses=0009 0009 13:20:57 Msec=2250 True Az=117.18 Ze=-131.94 Az status=0009 Ze status=0009 13:20:57 Check angles 13:20:57 SkyScan query 13:20:57 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 13:20:57 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 13:20:58 Check angles 13:20:58 SkyScan query 13:20:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 13:20:58 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 13:20:58 Message to Master queued w/err=0: serial=143813 error=0 13:21:03 Received message from Master: op=Filter serial=143814 13:21:03 Color wheel filter change from 0 to 0 13:21:03 FLIGetFilterPos err=0 currentPosition=0 13:21:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:03 Filter is already there-color wheel unchanged 13:21:03 Received message from Master: op=Shutter serial=143815 13:21:03 Shutter LASER close 13:21:03 Received message from Camera: op=State serial=143817 13:21:03 GetSingleValue result=40 Value=cccccccc 13:21:03 SkyScan query 13:21:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:21:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:04 Parameters OK 13:21:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:04 Set A/D data flow result=40 13:21:04 Set A/D channel type result=40 13:21:04 Set A/D encoding result=40 13:21:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:04 Set channel filter=0.000000e+000 result=40 13:21:04 Config A/D Result=40 13:21:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:04 Get A/D filter: -9.255963e+061 result=40 13:21:04 Get A/D value=-858993460 result=40 13:21:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:04 Parameters OK 13:21:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:04 Set A/D data flow result=40 13:21:04 Set A/D channel type result=40 13:21:04 Set A/D encoding result=40 13:21:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:04 Set channel filter=0.000000e+000 result=40 13:21:04 Config A/D Result=40 13:21:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:04 Get A/D filter: -9.255963e+061 result=40 13:21:04 Get A/D value=-858993460 result=40 13:21:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:04 Aux= 13:21:04 Message to Camera, serial 143817 queued 13:21:41 Received message from Master: op=PointingHead serial=143830 13:21:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:21:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:21:41 Point started: ret=0 13:21:41 point_skyscan result=0 13:21:42 Check angles 13:21:42 SkyScan query 13:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0009 0009 13:21:43 Msec=0 True Az=112.995 Ze=-171.45 Az status=0009 Ze status=0009 13:21:43 Check angles 13:21:43 SkyScan query 13:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:21:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:21:43 Message to Master queued w/err=0: serial=143830 error=0 13:21:48 Received message from Master: op=Filter serial=143831 13:21:48 Color wheel filter change from 0 to 0 13:21:48 FLIGetFilterPos err=0 currentPosition=0 13:21:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:48 Filter is already there-color wheel unchanged 13:21:48 Received message from Master: op=Shutter serial=143832 13:21:48 Shutter LASER open 13:21:49 Received message from Camera: op=State serial=143834 13:21:49 GetSingleValue result=40 Value=cccccccc 13:21:49 SkyScan query 13:21:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:21:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:49 Parameters OK 13:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:49 Set A/D data flow result=40 13:21:49 Set A/D channel type result=40 13:21:49 Set A/D encoding result=40 13:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:49 Set channel filter=0.000000e+000 result=40 13:21:49 Config A/D Result=40 13:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:49 Get A/D filter: -9.255963e+061 result=40 13:21:49 Get A/D value=-858993460 result=40 13:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:49 Parameters OK 13:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:49 Set A/D data flow result=40 13:21:49 Set A/D channel type result=40 13:21:49 Set A/D encoding result=40 13:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:49 Set channel filter=0.000000e+000 result=40 13:21:49 Config A/D Result=40 13:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:49 Get A/D filter: -9.255963e+061 result=40 13:21:49 Get A/D value=-858993460 result=40 13:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:49 Aux= 13:21:49 Message to Camera, serial 143834 queued 13:21:58 Received message from Master: op=Shutter serial=143844 13:21:58 Shutter LASER close 13:21:58 Received message from Master: op=PointingHead serial=143848 13:21:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:21:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:21:59 Point started: ret=0 13:21:59 point_skyscan result=0 13:21:59 Check angles 13:21:59 SkyScan query 13:22:00 SkyScan query done: ret=0 az=136.635<-9109 ze=-142.785<-21519 Statuses=0009 0009 13:22:00 Msec=0 True Az=136.635 Ze=-142.785 Az status=0009 Ze status=0009 13:22:00 Check angles 13:22:00 SkyScan query 13:22:01 SkyScan query done: ret=0 az=154.425<-10295 ze=-121.305<-20087 Statuses=0009 0009 13:22:01 Msec=750 True Az=154.425 Ze=-121.305 Az status=0009 Ze status=0009 13:22:01 Check angles 13:22:01 SkyScan query 13:22:01 SkyScan query done: ret=0 az=171.9<-11460 ze=-100.38<-18692 Statuses=0009 0009 13:22:01 Msec=1500 True Az=171.9 Ze=-100.38 Az status=0009 Ze status=0009 13:22:02 Check angles 13:22:02 SkyScan query 13:22:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.425<-17295 Statuses=0008 0009 13:22:02 Msec=2250 True Az=176.01 Ze=-79.425 Az status=0008 Ze status=0009 13:22:02 Check angles 13:22:02 SkyScan query 13:22:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 13:22:03 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 13:22:03 Check angles 13:22:03 SkyScan query 13:22:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:22:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:22:04 Message to Master queued w/err=0: serial=143848 error=0 13:22:09 Received message from Master: op=Filter serial=143849 13:22:09 Color wheel filter change from 0 to 0 13:22:09 FLIGetFilterPos err=0 currentPosition=0 13:22:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:09 Filter is already there-color wheel unchanged 13:22:09 Received message from Master: op=Shutter serial=143850 13:22:09 Shutter LASER close 13:22:09 Received message from Camera: op=State serial=143852 13:22:09 GetSingleValue result=40 Value=cccccccc 13:22:09 SkyScan query 13:22:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:22:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:10 Parameters OK 13:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:10 Set A/D data flow result=40 13:22:10 Set A/D channel type result=40 13:22:10 Set A/D encoding result=40 13:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:10 Set channel filter=0.000000e+000 result=40 13:22:10 Config A/D Result=40 13:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:10 Get A/D filter: -9.255963e+061 result=40 13:22:10 Get A/D value=-858993460 result=40 13:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:10 Parameters OK 13:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:10 Set A/D data flow result=40 13:22:10 Set A/D channel type result=40 13:22:10 Set A/D encoding result=40 13:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:10 Set channel filter=0.000000e+000 result=40 13:22:10 Config A/D Result=40 13:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:10 Get A/D filter: -9.255963e+061 result=40 13:22:10 Get A/D value=-858993460 result=40 13:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:10 Aux= 13:22:10 Message to Camera, serial 143852 queued 13:22:46 Received message from Master: op=PointingHead serial=143865 13:22:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:22:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:22:47 Point started: ret=0 13:22:47 point_skyscan result=0 13:22:48 Check angles 13:22:48 SkyScan query 13:22:48 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.27<-13418 Statuses=0009 0009 13:22:48 Msec=0 True Az=152.715 Ze=-21.27 Az status=0009 Ze status=0009 13:22:48 Check angles 13:22:48 SkyScan query 13:22:49 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.33<-12022 Statuses=0009 0009 13:22:49 Msec=750 True Az=135.12 Ze=-0.33 Az status=0009 Ze status=0009 13:22:49 Check angles 13:22:49 SkyScan query 13:22:50 SkyScan query done: ret=0 az=117.6<-7840 ze=20.73<-10618 Statuses=0009 0009 13:22:50 Msec=1500 True Az=117.6 Ze=20.73 Az status=0009 Ze status=0009 13:22:50 Check angles 13:22:50 SkyScan query 13:22:50 SkyScan query done: ret=0 az=100.23<-6682 ze=41.58<-9228 Statuses=0009 0009 13:22:50 Msec=2250 True Az=100.23 Ze=41.58 Az status=0009 Ze status=0009 13:22:51 Check angles 13:22:51 SkyScan query 13:22:51 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:22:51 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:22:51 Check angles 13:22:51 SkyScan query 13:22:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:22:52 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:22:52 Message to Master queued w/err=0: serial=143865 error=0 13:22:57 Received message from Master: op=Filter serial=143866 13:22:57 Color wheel filter change from 0 to 0 13:22:57 FLIGetFilterPos err=0 currentPosition=0 13:22:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:57 Filter is already there-color wheel unchanged 13:22:57 Received message from Master: op=Shutter serial=143867 13:22:57 Shutter LASER close 13:22:57 Received message from Camera: op=State serial=143869 13:22:57 GetSingleValue result=40 Value=cccccccc 13:22:57 SkyScan query 13:22:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:22:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:58 Parameters OK 13:22:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:58 Set A/D data flow result=40 13:22:58 Set A/D channel type result=40 13:22:58 Set A/D encoding result=40 13:22:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:58 Set channel filter=0.000000e+000 result=40 13:22:58 Config A/D Result=40 13:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:58 Get A/D filter: -9.255963e+061 result=40 13:22:58 Get A/D value=-858993460 result=40 13:22:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:58 Parameters OK 13:22:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:58 Set A/D data flow result=40 13:22:58 Set A/D channel type result=40 13:22:58 Set A/D encoding result=40 13:22:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:58 Set channel filter=0.000000e+000 result=40 13:22:58 Config A/D Result=40 13:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:58 Get A/D filter: -9.255963e+061 result=40 13:22:58 Get A/D value=-858993460 result=40 13:22:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:58 Aux= 13:22:58 Message to Camera, serial 143869 queued 13:23:35 Received message from Master: op=PointingHead serial=143882 13:23:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:23:35 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:23:35 Point started: ret=0 13:23:35 point_skyscan result=0 13:23:36 Check angles 13:23:36 SkyScan query 13:23:36 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 13:23:36 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 13:23:36 Check angles 13:23:36 SkyScan query 13:23:37 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 13:23:37 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 13:23:37 Check angles 13:23:37 SkyScan query 13:23:38 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 13:23:38 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 13:23:38 Check angles 13:23:38 SkyScan query 13:23:39 SkyScan query done: ret=0 az=161.46<-10764 ze=38.505<-9433 Statuses=0009 0008 13:23:39 Msec=2250 True Az=161.46 Ze=38.505 Az status=0009 Ze status=0008 13:23:39 Check angles 13:23:39 SkyScan query 13:23:39 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:23:39 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:23:39 Check angles 13:23:39 SkyScan query 13:23:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:23:40 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:23:40 Message to Master queued w/err=0: serial=143882 error=0 13:23:45 Received message from Master: op=Filter serial=143883 13:23:45 Color wheel filter change from 0 to 0 13:23:45 FLIGetFilterPos err=0 currentPosition=0 13:23:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:45 Filter is already there-color wheel unchanged 13:23:45 Received message from Master: op=Shutter serial=143884 13:23:45 Shutter LASER close 13:23:45 Received message from Camera: op=State serial=143886 13:23:45 GetSingleValue result=40 Value=cccccccc 13:23:45 SkyScan query 13:23:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:23:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:46 Parameters OK 13:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:46 Set A/D data flow result=40 13:23:46 Set A/D channel type result=40 13:23:46 Set A/D encoding result=40 13:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:46 Set channel filter=0.000000e+000 result=40 13:23:46 Config A/D Result=40 13:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:46 Get A/D filter: -9.255963e+061 result=40 13:23:46 Get A/D value=-858993460 result=40 13:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:46 Parameters OK 13:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:46 Set A/D data flow result=40 13:23:46 Set A/D channel type result=40 13:23:46 Set A/D encoding result=40 13:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:46 Set channel filter=0.000000e+000 result=40 13:23:46 Config A/D Result=40 13:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:46 Get A/D filter: -9.255963e+061 result=40 13:23:46 Get A/D value=-858993460 result=40 13:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:46 Aux= 13:23:46 Message to Camera, serial 143886 queued 13:24:23 Received message from Master: op=PointingHead serial=143899 13:24:23 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:24:23 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:24:23 Point started: ret=0 13:24:23 point_skyscan result=0 13:24:24 Check angles 13:24:24 SkyScan query 13:24:24 SkyScan query done: ret=0 az=152.745<-10183 ze=8.28<-11448 Statuses=0009 0009 13:24:24 Msec=0 True Az=152.745 Ze=8.28 Az status=0009 Ze status=0009 13:24:25 Check angles 13:24:25 SkyScan query 13:24:25 SkyScan query done: ret=0 az=135.225<-9015 ze=-12.615<-12841 Statuses=0009 0009 13:24:25 Msec=750 True Az=135.225 Ze=-12.615 Az status=0009 Ze status=0009 13:24:25 Check angles 13:24:25 SkyScan query 13:24:26 SkyScan query done: ret=0 az=117.39<-7826 ze=-34.08<-14272 Statuses=0009 0009 13:24:26 Msec=1500 True Az=117.39 Ze=-34.08 Az status=0009 Ze status=0009 13:24:26 Check angles 13:24:26 SkyScan query 13:24:27 SkyScan query done: ret=0 az=99.975<-6665 ze=-51.585<-15439 Statuses=0009 0009 13:24:27 Msec=2250 True Az=99.975 Ze=-51.585 Az status=0009 Ze status=0009 13:24:27 Check angles 13:24:27 SkyScan query 13:24:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 13:24:27 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 13:24:28 Check angles 13:24:28 SkyScan query 13:24:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:24:28 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:24:28 Message to Master queued w/err=0: serial=143899 error=0 13:24:33 Received message from Master: op=Filter serial=143900 13:24:33 Color wheel filter change from 0 to 0 13:24:33 FLIGetFilterPos err=0 currentPosition=0 13:24:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:33 Filter is already there-color wheel unchanged 13:24:33 Received message from Master: op=Shutter serial=143901 13:24:33 Shutter LASER close 13:24:33 Received message from Camera: op=State serial=143903 13:24:33 GetSingleValue result=40 Value=cccccccc 13:24:33 SkyScan query 13:24:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:24:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:34 Parameters OK 13:24:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:34 Set A/D data flow result=40 13:24:34 Set A/D channel type result=40 13:24:34 Set A/D encoding result=40 13:24:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:34 Set channel filter=0.000000e+000 result=40 13:24:34 Config A/D Result=40 13:24:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:34 Get A/D filter: -9.255963e+061 result=40 13:24:34 Get A/D value=-858993460 result=40 13:24:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:34 Parameters OK 13:24:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:34 Set A/D data flow result=40 13:24:34 Set A/D channel type result=40 13:24:34 Set A/D encoding result=40 13:24:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:34 Set channel filter=0.000000e+000 result=40 13:24:34 Config A/D Result=40 13:24:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:34 Get A/D filter: -9.255963e+061 result=40 13:24:34 Get A/D value=-858993460 result=40 13:24:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:34 Aux= 13:24:34 Message to Camera, serial 143903 queued 13:25:11 Received message from Master: op=PointingHead serial=143916 13:25:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:25:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:25:11 Point started: ret=0 13:25:11 point_skyscan result=0 13:25:12 Check angles 13:25:12 SkyScan query 13:25:12 SkyScan query done: ret=0 az=109.095<-7273 ze=-81.42<-17428 Statuses=0009 0009 13:25:12 Msec=0 True Az=109.095 Ze=-81.42 Az status=0009 Ze status=0009 13:25:13 Check angles 13:25:13 SkyScan query 13:25:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.375<-18825 Statuses=0008 0009 13:25:13 Msec=750 True Az=112.995 Ze=-102.375 Az status=0008 Ze status=0009 13:25:13 Check angles 13:25:13 SkyScan query 13:25:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.33<-20222 Statuses=0008 0009 13:25:14 Msec=1500 True Az=112.995 Ze=-123.33 Az status=0008 Ze status=0009 13:25:14 Check angles 13:25:14 SkyScan query 13:25:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 13:25:15 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 13:25:15 Check angles 13:25:15 SkyScan query 13:25:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.21<-23014 Statuses=0008 0009 13:25:15 Msec=3000 True Az=112.995 Ze=-165.21 Az status=0008 Ze status=0009 13:25:16 Check angles 13:25:16 SkyScan query 13:25:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 13:25:16 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 13:25:16 Message to Master queued w/err=0: serial=143916 error=0 13:25:21 Received message from Master: op=Filter serial=143917 13:25:21 Color wheel filter change from 0 to 0 13:25:21 FLIGetFilterPos err=0 currentPosition=0 13:25:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:21 Filter is already there-color wheel unchanged 13:25:21 Received message from Master: op=Shutter serial=143918 13:25:21 Shutter LASER open 13:25:22 Received message from Camera: op=State serial=143920 13:25:22 GetSingleValue result=40 Value=cccccccc 13:25:22 SkyScan query 13:25:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:25:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:22 Parameters OK 13:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:22 Set A/D data flow result=40 13:25:22 Set A/D channel type result=40 13:25:22 Set A/D encoding result=40 13:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:22 Set channel filter=0.000000e+000 result=40 13:25:22 Config A/D Result=40 13:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:22 Get A/D filter: -9.255963e+061 result=40 13:25:22 Get A/D value=-858993460 result=40 13:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:22 Parameters OK 13:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:22 Set A/D data flow result=40 13:25:22 Set A/D channel type result=40 13:25:22 Set A/D encoding result=40 13:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:22 Set channel filter=0.000000e+000 result=40 13:25:22 Config A/D Result=40 13:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:22 Get A/D filter: -9.255963e+061 result=40 13:25:22 Get A/D value=-858993460 result=40 13:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:22 Aux= 13:25:22 Message to Camera, serial 143920 queued 13:25:31 Received message from Master: op=Shutter serial=143930 13:25:31 Shutter LASER close 13:25:31 Received message from Master: op=PointingHead serial=143934 13:25:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:25:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:25:31 Point started: ret=0 13:25:31 point_skyscan result=0 13:25:32 Check angles 13:25:32 SkyScan query 13:25:33 SkyScan query done: ret=0 az=90.195<-6013 ze=157.425<-1505 Statuses=0009 0009 13:25:33 Msec=0 True Az=90.195 Ze=157.425 Az status=0009 Ze status=0009 13:25:33 Check angles 13:25:33 SkyScan query 13:25:33 SkyScan query done: ret=0 az=72.24<-4816 ze=136.125<-2925 Statuses=0009 0009 13:25:33 Msec=750 True Az=72.24 Ze=136.125 Az status=0009 Ze status=0009 13:25:34 Check angles 13:25:34 SkyScan query 13:25:34 SkyScan query done: ret=0 az=54.9<-3660 ze=115.185<-4321 Statuses=0009 0009 13:25:34 Msec=1500 True Az=54.9 Ze=115.185 Az status=0009 Ze status=0009 13:25:34 Check angles 13:25:34 SkyScan query 13:25:35 SkyScan query done: ret=0 az=40.965<-2731 ze=94.185<-5721 Statuses=0009 0009 13:25:35 Msec=2250 True Az=40.965 Ze=94.185 Az status=0009 Ze status=0009 13:25:35 Check angles 13:25:35 SkyScan query 13:25:36 SkyScan query done: ret=0 az=40.995<-2733 ze=73.245<-7117 Statuses=0008 0009 13:25:36 Msec=3000 True Az=40.995 Ze=73.245 Az status=0008 Ze status=0009 13:25:36 Check angles 13:25:36 SkyScan query 13:25:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.755<-8483 Statuses=0008 0009 13:25:36 Msec=3750 True Az=40.995 Ze=52.755 Az status=0008 Ze status=0009 13:25:37 Check angles 13:25:37 SkyScan query 13:25:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:25:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:25:37 Message to Master queued w/err=0: serial=143934 error=0 13:25:42 Received message from Master: op=Filter serial=143935 13:25:42 Color wheel filter change from 0 to 0 13:25:42 FLIGetFilterPos err=0 currentPosition=0 13:25:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:42 Filter is already there-color wheel unchanged 13:25:42 Received message from Master: op=Shutter serial=143936 13:25:42 Shutter LASER close 13:25:43 Received message from Camera: op=State serial=143938 13:25:43 GetSingleValue result=40 Value=cccccccc 13:25:43 SkyScan query 13:25:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:25:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:43 Parameters OK 13:25:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:43 Set A/D data flow result=40 13:25:43 Set A/D channel type result=40 13:25:43 Set A/D encoding result=40 13:25:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:43 Set channel filter=0.000000e+000 result=40 13:25:43 Config A/D Result=40 13:25:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:43 Get A/D filter: -9.255963e+061 result=40 13:25:43 Get A/D value=-858993460 result=40 13:25:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:43 Parameters OK 13:25:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:43 Set A/D data flow result=40 13:25:43 Set A/D channel type result=40 13:25:43 Set A/D encoding result=40 13:25:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:43 Set channel filter=0.000000e+000 result=40 13:25:43 Config A/D Result=40 13:25:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:43 Get A/D filter: -9.255963e+061 result=40 13:25:43 Get A/D value=-858993460 result=40 13:25:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:43 Aux= [UTC 2018-12-14 13:25:43] 13:25:43 Message to Camera, serial 143938 queued 13:26:20 Received message from Master: op=PointingHead serial=143951 13:26:20 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:26:20 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:26:20 Point started: ret=0 13:26:20 point_skyscan result=0 13:26:21 Check angles 13:26:21 SkyScan query 13:26:22 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 13:26:22 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 13:26:22 Check angles 13:26:22 SkyScan query 13:26:22 SkyScan query done: ret=0 az=81.63<-5442 ze=66.495<-7567 Statuses=0009 0008 13:26:22 Msec=750 True Az=81.63 Ze=66.495 Az status=0009 Ze status=0008 13:26:23 Check angles 13:26:23 SkyScan query 13:26:23 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 13:26:23 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 13:26:23 Check angles 13:26:23 SkyScan query 13:26:24 SkyScan query done: ret=0 az=116.97<-7798 ze=66.495<-7567 Statuses=0009 0008 13:26:24 Msec=2250 True Az=116.97 Ze=66.495 Az status=0009 Ze status=0008 13:26:24 Check angles 13:26:24 SkyScan query 13:26:25 SkyScan query done: ret=0 az=134.61<-8974 ze=66.495<-7567 Statuses=0009 0008 13:26:25 Msec=3000 True Az=134.61 Ze=66.495 Az status=0009 Ze status=0008 13:26:25 Check angles 13:26:25 SkyScan query 13:26:25 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 13:26:25 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 13:26:26 Check angles 13:26:26 SkyScan query 13:26:26 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 13:26:26 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 13:26:26 Message to Master queued w/err=0: serial=143951 error=0 13:26:31 Received message from Master: op=Filter serial=143952 13:26:31 Color wheel filter change from 0 to 0 13:26:31 FLIGetFilterPos err=0 currentPosition=0 13:26:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:31 Filter is already there-color wheel unchanged 13:26:31 Received message from Master: op=Shutter serial=143953 13:26:31 Shutter LASER close 13:26:31 Received message from Camera: op=State serial=143955 13:26:31 GetSingleValue result=40 Value=cccccccc 13:26:31 SkyScan query 13:26:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:26:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:32 Parameters OK 13:26:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:32 Set A/D data flow result=40 13:26:32 Set A/D channel type result=40 13:26:32 Set A/D encoding result=40 13:26:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:32 Set channel filter=0.000000e+000 result=40 13:26:32 Config A/D Result=40 13:26:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:32 Get A/D filter: -9.255963e+061 result=40 13:26:32 Get A/D value=-858993460 result=40 13:26:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:32 Parameters OK 13:26:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:32 Set A/D data flow result=40 13:26:32 Set A/D channel type result=40 13:26:32 Set A/D encoding result=40 13:26:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:32 Set channel filter=0.000000e+000 result=40 13:26:32 Config A/D Result=40 13:26:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:32 Get A/D filter: -9.255963e+061 result=40 13:26:32 Get A/D value=-858993460 result=40 13:26:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:32 Aux= 13:26:32 Message to Camera, serial 143955 queued 13:27:09 Received message from Master: op=PointingHead serial=143968 13:27:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:27:09 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:27:09 Point started: ret=0 13:27:09 point_skyscan result=0 13:27:10 Check angles 13:27:10 SkyScan query 13:27:10 SkyScan query done: ret=0 az=135.165<-9011 ze=36.915<-9539 Statuses=0009 0009 13:27:10 Msec=0 True Az=135.165 Ze=36.915 Az status=0009 Ze status=0009 13:27:11 Check angles 13:27:11 SkyScan query 13:27:11 SkyScan query done: ret=0 az=117.3<-7820 ze=15.615<-10959 Statuses=0009 0009 13:27:11 Msec=750 True Az=117.3 Ze=15.615 Az status=0009 Ze status=0009 13:27:11 Check angles 13:27:11 SkyScan query 13:27:12 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.415<-12361 Statuses=0009 0009 13:27:12 Msec=1500 True Az=99.885 Ze=-5.415 Az status=0009 Ze status=0009 13:27:12 Check angles 13:27:12 SkyScan query 13:27:13 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.355<-13757 Statuses=0009 0009 13:27:13 Msec=2250 True Az=82.44 Ze=-26.355 Az status=0009 Ze status=0009 13:27:13 Check angles 13:27:13 SkyScan query 13:27:13 SkyScan query done: ret=0 az=64.875<-4325 ze=-38.595<-14573 Statuses=0009 0008 13:27:13 Msec=3000 True Az=64.875 Ze=-38.595 Az status=0009 Ze status=0008 13:27:14 Check angles 13:27:14 SkyScan query 13:27:14 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.52<-14568 Statuses=0009 0008 13:27:14 Msec=3750 True Az=47.115 Ze=-38.52 Az status=0009 Ze status=0008 13:27:14 Check angles 13:27:14 SkyScan query 13:27:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:27:15 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:27:15 Message to Master queued w/err=0: serial=143968 error=0 13:27:20 Received message from Master: op=Filter serial=143969 13:27:20 Color wheel filter change from 0 to 0 13:27:20 FLIGetFilterPos err=0 currentPosition=0 13:27:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:20 Filter is already there-color wheel unchanged 13:27:20 Received message from Master: op=Shutter serial=143970 13:27:20 Shutter LASER close 13:27:20 Received message from Camera: op=State serial=143972 13:27:20 GetSingleValue result=40 Value=cccccccc 13:27:20 SkyScan query 13:27:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:27:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:21 Parameters OK 13:27:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:21 Set A/D data flow result=40 13:27:21 Set A/D channel type result=40 13:27:21 Set A/D encoding result=40 13:27:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:21 Set channel filter=0.000000e+000 result=40 13:27:21 Config A/D Result=40 13:27:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:21 Get A/D filter: -9.255963e+061 result=40 13:27:21 Get A/D value=-858993460 result=40 13:27:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:21 Parameters OK 13:27:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:21 Set A/D data flow result=40 13:27:21 Set A/D channel type result=40 13:27:21 Set A/D encoding result=40 13:27:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:21 Set channel filter=0.000000e+000 result=40 13:27:21 Config A/D Result=40 13:27:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:21 Get A/D filter: -9.255963e+061 result=40 13:27:21 Get A/D value=-858993460 result=40 13:27:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:21 Aux= 13:27:21 Message to Camera, serial 143972 queued 13:27:57 Received message from Master: op=PointingHead serial=143984 13:27:57 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:27:57 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:27:57 Point started: ret=0 13:27:57 point_skyscan result=0 13:27:58 Check angles 13:27:58 SkyScan query 13:27:58 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.115<-16541 Statuses=0009 0009 13:27:58 Msec=0 True Az=63.795 Ze=-68.115 Az status=0009 Ze status=0009 13:27:59 Check angles 13:27:59 SkyScan query 13:27:59 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.55<-17970 Statuses=0009 0009 13:27:59 Msec=750 True Az=81.645 Ze=-89.55 Az status=0009 Ze status=0009 13:27:59 Check angles 13:27:59 SkyScan query 13:28:00 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.52<-19368 Statuses=0009 0009 13:28:00 Msec=1500 True Az=99.195 Ze=-110.52 Az status=0009 Ze status=0009 13:28:00 Check angles 13:28:00 SkyScan query 13:28:01 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.4<-20760 Statuses=0009 0009 13:28:01 Msec=2250 True Az=116.625 Ze=-131.4 Az status=0009 Ze status=0009 13:28:01 Check angles 13:28:01 SkyScan query 13:28:01 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 13:28:01 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 13:28:02 Check angles 13:28:02 SkyScan query 13:28:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 13:28:02 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 13:28:02 Message to Master queued w/err=0: serial=143984 error=0 13:28:07 Received message from Master: op=Filter serial=143985 13:28:07 Color wheel filter change from 0 to 0 13:28:07 FLIGetFilterPos err=0 currentPosition=0 13:28:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:07 Filter is already there-color wheel unchanged 13:28:07 Received message from Master: op=Shutter serial=143986 13:28:07 Shutter LASER close 13:28:07 Received message from Camera: op=State serial=143988 13:28:07 GetSingleValue result=40 Value=cccccccc 13:28:07 SkyScan query 13:28:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:28:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:08 Parameters OK 13:28:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:08 Set A/D data flow result=40 13:28:08 Set A/D channel type result=40 13:28:08 Set A/D encoding result=40 13:28:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:08 Set channel filter=0.000000e+000 result=40 13:28:08 Config A/D Result=40 13:28:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:08 Get A/D filter: -9.255963e+061 result=40 13:28:08 Get A/D value=-858993460 result=40 13:28:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:08 Parameters OK 13:28:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:08 Set A/D data flow result=40 13:28:08 Set A/D channel type result=40 13:28:08 Set A/D encoding result=40 13:28:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:08 Set channel filter=0.000000e+000 result=40 13:28:08 Config A/D Result=40 13:28:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:08 Get A/D filter: -9.255963e+061 result=40 13:28:08 Get A/D value=-858993460 result=40 13:28:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:08 Aux= 13:28:08 Message to Camera, serial 143988 queued 13:28:45 Received message from Master: op=PointingHead serial=144001 13:28:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:28:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:28:45 Point started: ret=0 13:28:45 point_skyscan result=0 13:28:46 Check angles 13:28:46 SkyScan query 13:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 13:28:46 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 13:28:47 Check angles 13:28:47 SkyScan query 13:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:28:47 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:28:47 Message to Master queued w/err=0: serial=144001 error=0 13:28:52 Received message from Master: op=Filter serial=144002 13:28:52 Color wheel filter change from 0 to 0 13:28:52 FLIGetFilterPos err=0 currentPosition=0 13:28:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:52 Filter is already there-color wheel unchanged 13:28:52 Received message from Master: op=Shutter serial=144003 13:28:52 Shutter LASER open 13:28:53 Received message from Camera: op=State serial=144005 13:28:53 GetSingleValue result=40 Value=cccccccc 13:28:53 SkyScan query 13:28:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:28:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:53 Parameters OK 13:28:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:53 Set A/D data flow result=40 13:28:53 Set A/D channel type result=40 13:28:53 Set A/D encoding result=40 13:28:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:53 Set channel filter=0.000000e+000 result=40 13:28:53 Config A/D Result=40 13:28:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:53 Get A/D filter: -9.255963e+061 result=40 13:28:53 Get A/D value=-858993460 result=40 13:28:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:53 Parameters OK 13:28:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:53 Set A/D data flow result=40 13:28:53 Set A/D channel type result=40 13:28:53 Set A/D encoding result=40 13:28:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:53 Set channel filter=0.000000e+000 result=40 13:28:53 Config A/D Result=40 13:28:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:53 Get A/D filter: -9.255963e+061 result=40 13:28:53 Get A/D value=-858993460 result=40 13:28:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:53 Aux= 13:28:53 Message to Camera, serial 144005 queued 13:29:02 Received message from Master: op=Shutter serial=144015 13:29:02 Shutter LASER close 13:29:02 Received message from Master: op=PointingHead serial=144019 13:29:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:29:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:29:02 Point started: ret=0 13:29:02 point_skyscan result=0 13:29:03 Check angles 13:29:03 SkyScan query 13:29:04 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.385<-21559 Statuses=0009 0009 13:29:04 Msec=0 True Az=135.93 Ze=-143.385 Az status=0009 Ze status=0009 13:29:04 Check angles 13:29:04 SkyScan query 13:29:05 SkyScan query done: ret=0 az=153.315<-10221 ze=-122.385<-20159 Statuses=0009 0009 13:29:05 Msec=750 True Az=153.315 Ze=-122.385 Az status=0009 Ze status=0009 13:29:05 Check angles 13:29:05 SkyScan query 13:29:05 SkyScan query done: ret=0 az=170.88<-11392 ze=-101.46<-18764 Statuses=0009 0009 13:29:05 Msec=1500 True Az=170.88 Ze=-101.46 Az status=0009 Ze status=0009 13:29:06 Check angles 13:29:06 SkyScan query 13:29:06 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.085<-17339 Statuses=0008 0009 13:29:06 Msec=2250 True Az=176.01 Ze=-80.085 Az status=0008 Ze status=0009 13:29:06 Check angles 13:29:06 SkyScan query 13:29:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.59<-15906 Statuses=0008 0009 13:29:07 Msec=3000 True Az=176.01 Ze=-58.59 Az status=0008 Ze status=0009 13:29:07 Check angles 13:29:07 SkyScan query 13:29:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 13:29:08 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 13:29:08 Message to Master queued w/err=0: serial=144019 error=0 13:29:13 Received message from Master: op=Filter serial=144020 13:29:13 Color wheel filter change from 0 to 0 13:29:13 FLIGetFilterPos err=0 currentPosition=0 13:29:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:13 Filter is already there-color wheel unchanged 13:29:13 Received message from Master: op=Shutter serial=144021 13:29:13 Shutter LASER close 13:29:13 Received message from Camera: op=State serial=144023 13:29:13 GetSingleValue result=40 Value=cccccccc 13:29:13 SkyScan query 13:29:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:29:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:14 Parameters OK 13:29:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:14 Set A/D data flow result=40 13:29:14 Set A/D channel type result=40 13:29:14 Set A/D encoding result=40 13:29:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:14 Set channel filter=0.000000e+000 result=40 13:29:14 Config A/D Result=40 13:29:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:14 Get A/D filter: -9.255963e+061 result=40 13:29:14 Get A/D value=-858993460 result=40 13:29:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:14 Parameters OK 13:29:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:14 Set A/D data flow result=40 13:29:14 Set A/D channel type result=40 13:29:14 Set A/D encoding result=40 13:29:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:14 Set channel filter=0.000000e+000 result=40 13:29:14 Config A/D Result=40 13:29:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:14 Get A/D filter: -9.255963e+061 result=40 13:29:14 Get A/D value=-858993460 result=40 13:29:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:14 Aux= 13:29:14 Message to Camera, serial 144023 queued 13:29:49 Received message from Master: op=PointingHead serial=144035 13:29:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:29:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:29:50 Point started: ret=0 13:29:50 point_skyscan result=0 13:29:51 Check angles 13:29:51 SkyScan query 13:29:51 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.435<-13429 Statuses=0009 0009 13:29:51 Msec=0 True Az=152.775 Ze=-21.435 Az status=0009 Ze status=0009 13:29:51 Check angles 13:29:51 SkyScan query 13:29:52 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.495<-12033 Statuses=0009 0009 13:29:52 Msec=750 True Az=135.27 Ze=-0.495 Az status=0009 Ze status=0009 13:29:52 Check angles 13:29:52 SkyScan query 13:29:53 SkyScan query done: ret=0 az=117.765<-7851 ze=20.49<-10634 Statuses=0009 0009 13:29:53 Msec=1500 True Az=117.765 Ze=20.49 Az status=0009 Ze status=0009 13:29:53 Check angles 13:29:53 SkyScan query 13:29:53 SkyScan query done: ret=0 az=100.395<-6693 ze=41.43<-9238 Statuses=0009 0009 13:29:53 Msec=2250 True Az=100.395 Ze=41.43 Az status=0009 Ze status=0009 13:29:54 Check angles 13:29:54 SkyScan query 13:29:54 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 13:29:54 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 13:29:54 Check angles 13:29:54 SkyScan query 13:29:55 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 13:29:55 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 13:29:55 Message to Master queued w/err=0: serial=144035 error=0 13:30:00 Received message from Master: op=Filter serial=144036 13:30:00 Color wheel filter change from 0 to 0 13:30:00 FLIGetFilterPos err=0 currentPosition=0 13:30:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:00 Filter is already there-color wheel unchanged 13:30:00 Received message from Master: op=Shutter serial=144037 13:30:00 Shutter LASER close 13:30:00 Received message from Camera: op=State serial=144039 13:30:00 GetSingleValue result=40 Value=cccccccc 13:30:00 SkyScan query 13:30:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:30:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:01 Parameters OK 13:30:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:01 Set A/D data flow result=40 13:30:01 Set A/D channel type result=40 13:30:01 Set A/D encoding result=40 13:30:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:01 Set channel filter=0.000000e+000 result=40 13:30:01 Config A/D Result=40 13:30:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:01 Get A/D filter: -9.255963e+061 result=40 13:30:01 Get A/D value=-858993460 result=40 13:30:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:01 Parameters OK 13:30:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:01 Set A/D data flow result=40 13:30:01 Set A/D channel type result=40 13:30:01 Set A/D encoding result=40 13:30:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:01 Set channel filter=0.000000e+000 result=40 13:30:01 Config A/D Result=40 13:30:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:01 Get A/D filter: -9.255963e+061 result=40 13:30:01 Get A/D value=-858993460 result=40 13:30:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:01 Aux= 13:30:01 Message to Camera, serial 144039 queued 13:30:37 Received message from Master: op=PointingHead serial=144052 13:30:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:30:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:30:38 Point started: ret=0 13:30:38 point_skyscan result=0 13:30:39 Check angles 13:30:39 SkyScan query 13:30:39 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 13:30:39 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 13:30:39 Check angles 13:30:39 SkyScan query 13:30:40 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 13:30:40 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 13:30:40 Check angles 13:30:40 SkyScan query 13:30:41 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 13:30:41 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 13:30:41 Check angles 13:30:41 SkyScan query 13:30:41 SkyScan query done: ret=0 az=161.775<-10785 ze=38.505<-9433 Statuses=0009 0008 13:30:41 Msec=2250 True Az=161.775 Ze=38.505 Az status=0009 Ze status=0008 13:30:42 Check angles 13:30:42 SkyScan query 13:30:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:30:42 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:30:42 Check angles 13:30:42 SkyScan query 13:30:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:30:43 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:30:43 Message to Master queued w/err=0: serial=144052 error=0 13:30:48 Received message from Master: op=Filter serial=144053 13:30:48 Color wheel filter change from 0 to 0 13:30:48 FLIGetFilterPos err=0 currentPosition=0 13:30:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:48 Filter is already there-color wheel unchanged 13:30:48 Received message from Master: op=Shutter serial=144054 13:30:48 Shutter LASER close 13:30:48 Received message from Camera: op=State serial=144056 13:30:48 GetSingleValue result=40 Value=cccccccc 13:30:48 SkyScan query 13:30:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:30:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:49 Parameters OK 13:30:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:49 Set A/D data flow result=40 13:30:49 Set A/D channel type result=40 13:30:49 Set A/D encoding result=40 13:30:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:49 Set channel filter=0.000000e+000 result=40 13:30:49 Config A/D Result=40 13:30:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:49 Get A/D filter: -9.255963e+061 result=40 13:30:49 Get A/D value=-858993460 result=40 13:30:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:49 Parameters OK 13:30:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:49 Set A/D data flow result=40 13:30:49 Set A/D channel type result=40 13:30:49 Set A/D encoding result=40 13:30:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:49 Set channel filter=0.000000e+000 result=40 13:30:49 Config A/D Result=40 13:30:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:49 Get A/D filter: -9.255963e+061 result=40 13:30:49 Get A/D value=-858993460 result=40 13:30:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:49 Aux= 13:30:49 Message to Camera, serial 144056 queued 13:31:26 Received message from Master: op=PointingHead serial=144069 13:31:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:31:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:31:26 Point started: ret=0 13:31:26 point_skyscan result=0 13:31:27 Check angles 13:31:27 SkyScan query 13:31:27 SkyScan query done: ret=0 az=152.94<-10196 ze=8.7<-11420 Statuses=0009 0009 13:31:27 Msec=0 True Az=152.94 Ze=8.7 Az status=0009 Ze status=0009 13:31:27 Check angles 13:31:27 SkyScan query 13:31:28 SkyScan query done: ret=0 az=135.525<-9035 ze=-12.27<-12818 Statuses=0009 0009 13:31:28 Msec=750 True Az=135.525 Ze=-12.27 Az status=0009 Ze status=0009 13:31:28 Check angles 13:31:28 SkyScan query 13:31:29 SkyScan query done: ret=0 az=118.005<-7867 ze=-33.21<-14214 Statuses=0009 0009 13:31:29 Msec=1500 True Az=118.005 Ze=-33.21 Az status=0009 Ze status=0009 13:31:29 Check angles 13:31:29 SkyScan query 13:31:30 SkyScan query done: ret=0 az=100.59<-6706 ze=-51.54<-15436 Statuses=0009 0009 13:31:30 Msec=2250 True Az=100.59 Ze=-51.54 Az status=0009 Ze status=0009 13:31:30 Check angles 13:31:30 SkyScan query 13:31:30 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 13:31:30 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 13:31:30 Check angles 13:31:30 SkyScan query 13:31:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:31:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:31:31 Message to Master queued w/err=0: serial=144069 error=0 13:31:36 Received message from Master: op=Filter serial=144070 13:31:36 Color wheel filter change from 0 to 0 13:31:36 FLIGetFilterPos err=0 currentPosition=0 13:31:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:36 Filter is already there-color wheel unchanged 13:31:36 Received message from Master: op=Shutter serial=144071 13:31:36 Shutter LASER close 13:31:36 Received message from Camera: op=State serial=144073 13:31:36 GetSingleValue result=40 Value=cccccccc 13:31:36 SkyScan query 13:31:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:31:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:37 Parameters OK 13:31:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:37 Set A/D data flow result=40 13:31:37 Set A/D channel type result=40 13:31:37 Set A/D encoding result=40 13:31:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:37 Set channel filter=0.000000e+000 result=40 13:31:37 Config A/D Result=40 13:31:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:37 Get A/D filter: -9.255963e+061 result=40 13:31:37 Get A/D value=-858993460 result=40 13:31:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:37 Parameters OK 13:31:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:37 Set A/D data flow result=40 13:31:37 Set A/D channel type result=40 13:31:37 Set A/D encoding result=40 13:31:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:37 Set channel filter=0.000000e+000 result=40 13:31:37 Config A/D Result=40 13:31:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:37 Get A/D filter: -9.255963e+061 result=40 13:31:37 Get A/D value=-858993460 result=40 13:31:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:37 Aux= 13:31:37 Message to Camera, serial 144073 queued 13:32:14 Received message from Master: op=PointingHead serial=144086 13:32:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:32:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:32:14 Point started: ret=0 13:32:14 point_skyscan result=0 13:32:15 Check angles 13:32:15 SkyScan query 13:32:15 SkyScan query done: ret=0 az=109.11<-7274 ze=-81.345<-17423 Statuses=0009 0009 13:32:15 Msec=0 True Az=109.11 Ze=-81.345 Az status=0009 Ze status=0009 13:32:16 Check angles 13:32:16 SkyScan query 13:32:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 13:32:16 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 13:32:16 Check angles 13:32:16 SkyScan query 13:32:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.14<-20276 Statuses=0008 0009 13:32:17 Msec=1500 True Az=112.995 Ze=-124.14 Az status=0008 Ze status=0009 13:32:17 Check angles 13:32:17 SkyScan query 13:32:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 13:32:18 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 13:32:18 Check angles 13:32:18 SkyScan query 13:32:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.02<-23068 Statuses=0008 0009 13:32:18 Msec=3000 True Az=112.995 Ze=-166.02 Az status=0008 Ze status=0009 13:32:19 Check angles 13:32:19 SkyScan query 13:32:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:32:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:32:19 Message to Master queued w/err=0: serial=144086 error=0 13:32:24 Received message from Master: op=Filter serial=144087 13:32:24 Color wheel filter change from 0 to 0 13:32:24 FLIGetFilterPos err=0 currentPosition=0 13:32:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:24 Filter is already there-color wheel unchanged 13:32:24 Received message from Master: op=Shutter serial=144088 13:32:24 Shutter LASER open 13:32:25 Received message from Camera: op=State serial=144090 13:32:25 GetSingleValue result=40 Value=cccccccc 13:32:25 SkyScan query 13:32:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:32:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:25 Parameters OK 13:32:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:25 Set A/D data flow result=40 13:32:25 Set A/D channel type result=40 13:32:25 Set A/D encoding result=40 13:32:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:25 Set channel filter=0.000000e+000 result=40 13:32:25 Config A/D Result=40 13:32:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:25 Get A/D filter: -9.255963e+061 result=40 13:32:25 Get A/D value=-858993460 result=40 13:32:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:25 Parameters OK 13:32:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:25 Set A/D data flow result=40 13:32:25 Set A/D channel type result=40 13:32:25 Set A/D encoding result=40 13:32:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:25 Set channel filter=0.000000e+000 result=40 13:32:25 Config A/D Result=40 13:32:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:25 Get A/D filter: -9.255963e+061 result=40 13:32:25 Get A/D value=-858993460 result=40 13:32:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:25 Aux= 13:32:25 Message to Camera, serial 144090 queued 13:32:34 Received message from Master: op=Shutter serial=144100 13:32:34 Shutter LASER close 13:32:34 Received message from Master: op=PointingHead serial=144104 13:32:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:32:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:32:34 Point started: ret=0 13:32:34 point_skyscan result=0 13:32:35 Check angles 13:32:35 SkyScan query 13:32:36 SkyScan query done: ret=0 az=89.46<-5964 ze=156.72<-1552 Statuses=0009 0009 13:32:36 Msec=0 True Az=89.46 Ze=156.72 Az status=0009 Ze status=0009 13:32:36 Check angles 13:32:36 SkyScan query 13:32:36 SkyScan query done: ret=0 az=72.015<-4801 ze=135.78<-2948 Statuses=0009 0009 13:32:36 Msec=750 True Az=72.015 Ze=135.78 Az status=0009 Ze status=0009 13:32:37 Check angles 13:32:37 SkyScan query 13:32:37 SkyScan query done: ret=0 az=54.27<-3618 ze=114.33<-4378 Statuses=0009 0009 13:32:37 Msec=1500 True Az=54.27 Ze=114.33 Az status=0009 Ze status=0009 13:32:37 Check angles 13:32:37 SkyScan query 13:32:38 SkyScan query done: ret=0 az=40.995<-2733 ze=93<-5800 Statuses=0009 0009 13:32:38 Msec=2250 True Az=40.995 Ze=93 Az status=0009 Ze status=0009 13:32:38 Check angles 13:32:38 SkyScan query 13:32:39 SkyScan query done: ret=0 az=40.995<-2733 ze=71.625<-7225 Statuses=0008 0009 13:32:39 Msec=3000 True Az=40.995 Ze=71.625 Az status=0008 Ze status=0009 13:32:39 Check angles 13:32:39 SkyScan query 13:32:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.93<-8538 Statuses=0008 0009 13:32:39 Msec=3750 True Az=40.995 Ze=51.93 Az status=0008 Ze status=0009 13:32:40 Check angles 13:32:40 SkyScan query 13:32:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:32:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:32:40 Message to Master queued w/err=0: serial=144104 error=0 13:32:45 Received message from Master: op=Filter serial=144105 13:32:45 Color wheel filter change from 0 to 0 13:32:45 FLIGetFilterPos err=0 currentPosition=0 13:32:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:45 Filter is already there-color wheel unchanged 13:32:45 Received message from Master: op=Shutter serial=144106 13:32:45 Shutter LASER close 13:32:46 Received message from Camera: op=State serial=144108 13:32:46 GetSingleValue result=40 Value=cccccccc 13:32:46 SkyScan query 13:32:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:32:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:46 Parameters OK 13:32:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:46 Set A/D data flow result=40 13:32:46 Set A/D channel type result=40 13:32:46 Set A/D encoding result=40 13:32:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:46 Set channel filter=0.000000e+000 result=40 13:32:46 Config A/D Result=40 13:32:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:46 Get A/D filter: -9.255963e+061 result=40 13:32:46 Get A/D value=-858993460 result=40 13:32:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:46 Parameters OK 13:32:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:46 Set A/D data flow result=40 13:32:46 Set A/D channel type result=40 13:32:46 Set A/D encoding result=40 13:32:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:46 Set channel filter=0.000000e+000 result=40 13:32:46 Config A/D Result=40 13:32:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:46 Get A/D filter: -9.255963e+061 result=40 13:32:46 Get A/D value=-858993460 result=40 13:32:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:46 Aux= 13:32:46 Message to Camera, serial 144108 queued 13:33:23 Received message from Master: op=PointingHead serial=144121 13:33:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:33:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:33:23 Point started: ret=0 13:33:23 point_skyscan result=0 13:33:24 Check angles 13:33:24 SkyScan query 13:33:25 SkyScan query done: ret=0 az=63.99<-4266 ze=66.54<-7564 Statuses=0009 0008 13:33:25 Msec=0 True Az=63.99 Ze=66.54 Az status=0009 Ze status=0008 13:33:25 Check angles 13:33:25 SkyScan query 13:33:25 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 13:33:25 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 13:33:26 Check angles 13:33:26 SkyScan query 13:33:26 SkyScan query done: ret=0 az=99<-6600 ze=66.495<-7567 Statuses=0009 0008 13:33:26 Msec=1500 True Az=99 Ze=66.495 Az status=0009 Ze status=0008 13:33:26 Check angles 13:33:26 SkyScan query 13:33:27 SkyScan query done: ret=0 az=116.46<-7764 ze=66.495<-7567 Statuses=0009 0008 13:33:27 Msec=2250 True Az=116.46 Ze=66.495 Az status=0009 Ze status=0008 13:33:27 Check angles 13:33:27 SkyScan query 13:33:28 SkyScan query done: ret=0 az=133.95<-8930 ze=66.495<-7567 Statuses=0009 0008 13:33:28 Msec=3000 True Az=133.95 Ze=66.495 Az status=0009 Ze status=0008 13:33:28 Check angles 13:33:28 SkyScan query 13:33:28 SkyScan query done: ret=0 az=151.41<-10094 ze=66.495<-7567 Statuses=0009 0008 13:33:28 Msec=3750 True Az=151.41 Ze=66.495 Az status=0009 Ze status=0008 13:33:29 Check angles 13:33:29 SkyScan query 13:33:29 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 13:33:29 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 13:33:29 Message to Master queued w/err=0: serial=144121 error=0 13:33:34 Received message from Master: op=Filter serial=144122 13:33:34 Color wheel filter change from 0 to 0 13:33:34 FLIGetFilterPos err=0 currentPosition=0 13:33:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:34 Filter is already there-color wheel unchanged 13:33:34 Received message from Master: op=Shutter serial=144123 13:33:34 Shutter LASER close 13:33:34 Received message from Camera: op=State serial=144125 13:33:34 GetSingleValue result=40 Value=cccccccc 13:33:34 SkyScan query 13:33:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:33:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:35 Parameters OK 13:33:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:35 Set A/D data flow result=40 13:33:35 Set A/D channel type result=40 13:33:35 Set A/D encoding result=40 13:33:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:35 Set channel filter=0.000000e+000 result=40 13:33:35 Config A/D Result=40 13:33:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:35 Get A/D filter: -9.255963e+061 result=40 13:33:35 Get A/D value=-858993460 result=40 13:33:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:35 Parameters OK 13:33:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:35 Set A/D data flow result=40 13:33:35 Set A/D channel type result=40 13:33:35 Set A/D encoding result=40 13:33:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:35 Set channel filter=0.000000e+000 result=40 13:33:35 Config A/D Result=40 13:33:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:35 Get A/D filter: -9.255963e+061 result=40 13:33:35 Get A/D value=-858993460 result=40 13:33:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:33:35 Aux= 13:33:35 Message to Camera, serial 144125 queued 13:34:12 Received message from Master: op=PointingHead serial=144138 13:34:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:34:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:34:12 Point started: ret=0 13:34:12 point_skyscan result=0 13:34:13 Check angles 13:34:13 SkyScan query 13:34:13 SkyScan query done: ret=0 az=134.745<-8983 ze=36.63<-9558 Statuses=0009 0009 13:34:13 Msec=0 True Az=134.745 Ze=36.63 Az status=0009 Ze status=0009 13:34:14 Check angles 13:34:14 SkyScan query 13:34:14 SkyScan query done: ret=0 az=117.375<-7825 ze=15.705<-10953 Statuses=0009 0009 13:34:14 Msec=750 True Az=117.375 Ze=15.705 Az status=0009 Ze status=0009 13:34:14 Check angles 13:34:14 SkyScan query 13:34:15 SkyScan query done: ret=0 az=100.05<-6670 ze=-5.295<-12353 Statuses=0009 0009 13:34:15 Msec=1500 True Az=100.05 Ze=-5.295 Az status=0009 Ze status=0009 13:34:15 Check angles 13:34:15 SkyScan query 13:34:16 SkyScan query done: ret=0 az=82.53<-5502 ze=-26.415<-13761 Statuses=0009 0009 13:34:16 Msec=2250 True Az=82.53 Ze=-26.415 Az status=0009 Ze status=0009 13:34:16 Check angles 13:34:16 SkyScan query 13:34:16 SkyScan query done: ret=0 az=65.04<-4336 ze=-38.595<-14573 Statuses=0009 0008 13:34:16 Msec=3000 True Az=65.04 Ze=-38.595 Az status=0009 Ze status=0008 13:34:17 Check angles 13:34:17 SkyScan query 13:34:17 SkyScan query done: ret=0 az=47.565<-3171 ze=-38.52<-14568 Statuses=0009 0008 13:34:17 Msec=3750 True Az=47.565 Ze=-38.52 Az status=0009 Ze status=0008 13:34:17 Check angles 13:34:17 SkyScan query 13:34:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:34:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:34:18 Message to Master queued w/err=0: serial=144138 error=0 13:34:23 Received message from Master: op=Filter serial=144139 13:34:23 Color wheel filter change from 0 to 0 13:34:23 FLIGetFilterPos err=0 currentPosition=0 13:34:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:23 Filter is already there-color wheel unchanged 13:34:23 Received message from Master: op=Shutter serial=144140 13:34:23 Shutter LASER close 13:34:23 Received message from Camera: op=State serial=144142 13:34:23 GetSingleValue result=40 Value=cccccccc 13:34:23 SkyScan query 13:34:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:34:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:24 Parameters OK 13:34:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:24 Set A/D data flow result=40 13:34:24 Set A/D channel type result=40 13:34:24 Set A/D encoding result=40 13:34:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:24 Set channel filter=0.000000e+000 result=40 13:34:24 Config A/D Result=40 13:34:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:24 Get A/D filter: -9.255963e+061 result=40 13:34:24 Get A/D value=-858993460 result=40 13:34:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:24 Parameters OK 13:34:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:24 Set A/D data flow result=40 13:34:24 Set A/D channel type result=40 13:34:24 Set A/D encoding result=40 13:34:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:24 Set channel filter=0.000000e+000 result=40 13:34:24 Config A/D Result=40 13:34:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:24 Get A/D filter: -9.255963e+061 result=40 13:34:24 Get A/D value=-858993460 result=40 13:34:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:24 Aux= 13:34:24 Message to Camera, serial 144142 queued 13:35:01 Received message from Master: op=PointingHead serial=144155 13:35:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:35:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:35:01 Point started: ret=0 13:35:01 point_skyscan result=0 13:35:02 Check angles 13:35:02 SkyScan query 13:35:02 SkyScan query done: ret=0 az=63.72<-4248 ze=-68.055<-16537 Statuses=0009 0009 13:35:02 Msec=0 True Az=63.72 Ze=-68.055 Az status=0009 Ze status=0009 13:35:02 Check angles 13:35:02 SkyScan query 13:35:03 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.025<-17935 Statuses=0009 0009 13:35:03 Msec=750 True Az=81.33 Ze=-89.025 Az status=0009 Ze status=0009 13:35:03 Check angles 13:35:03 SkyScan query 13:35:04 SkyScan query done: ret=0 az=99.03<-6602 ze=-110.415<-19361 Statuses=0009 0009 13:35:04 Msec=1500 True Az=99.03 Ze=-110.415 Az status=0009 Ze status=0009 13:35:04 Check angles 13:35:04 SkyScan query 13:35:04 SkyScan query done: ret=0 az=116.595<-7773 ze=-131.34<-20756 Statuses=0009 0009 13:35:04 Msec=2250 True Az=116.595 Ze=-131.34 Az status=0009 Ze status=0009 13:35:05 Check angles 13:35:05 SkyScan query 13:35:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 13:35:05 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 13:35:05 Check angles 13:35:05 SkyScan query 13:35:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 13:35:06 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 13:35:06 Message to Master queued w/err=0: serial=144155 error=0 13:35:11 Received message from Master: op=Filter serial=144156 13:35:11 Color wheel filter change from 0 to 0 13:35:11 FLIGetFilterPos err=0 currentPosition=0 13:35:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:11 Filter is already there-color wheel unchanged 13:35:11 Received message from Master: op=Shutter serial=144157 13:35:11 Shutter LASER close 13:35:11 Received message from Camera: op=State serial=144159 13:35:11 GetSingleValue result=40 Value=cccccccc 13:35:11 SkyScan query 13:35:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:35:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:12 Parameters OK 13:35:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:12 Set A/D data flow result=40 13:35:12 Set A/D channel type result=40 13:35:12 Set A/D encoding result=40 13:35:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:12 Set channel filter=0.000000e+000 result=40 13:35:12 Config A/D Result=40 13:35:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:12 Get A/D filter: -9.255963e+061 result=40 13:35:12 Get A/D value=-858993460 result=40 13:35:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:12 Parameters OK 13:35:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:12 Set A/D data flow result=40 13:35:12 Set A/D channel type result=40 13:35:12 Set A/D encoding result=40 13:35:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:12 Set channel filter=0.000000e+000 result=40 13:35:12 Config A/D Result=40 13:35:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:12 Get A/D filter: -9.255963e+061 result=40 13:35:12 Get A/D value=-858993460 result=40 13:35:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:12 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:12 Aux= 13:35:12 Message to Camera, serial 144159 queued 13:35:49 Received message from Master: op=PointingHead serial=144172 13:35:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:35:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:35:49 Point started: ret=0 13:35:49 point_skyscan result=0 13:35:50 Check angles 13:35:50 SkyScan query 13:35:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0009 0009 13:35:50 Msec=0 True Az=112.995 Ze=-171.21 Az status=0009 Ze status=0009 13:35:51 Check angles 13:35:51 SkyScan query 13:35:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:35:51 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:35:51 Message to Master queued w/err=0: serial=144172 error=0 [UTC 2018-12-14 13:35:52] 13:35:56 Received message from Master: op=Filter serial=144173 13:35:56 Color wheel filter change from 0 to 0 13:35:56 FLIGetFilterPos err=0 currentPosition=0 13:35:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:56 Filter is already there-color wheel unchanged 13:35:56 Received message from Master: op=Shutter serial=144174 13:35:56 Shutter LASER open 13:35:56 Received message from Camera: op=State serial=144176 13:35:56 GetSingleValue result=40 Value=cccccccc 13:35:56 SkyScan query 13:35:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:35:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:57 Parameters OK 13:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:57 Set A/D data flow result=40 13:35:57 Set A/D channel type result=40 13:35:57 Set A/D encoding result=40 13:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:57 Set channel filter=0.000000e+000 result=40 13:35:57 Config A/D Result=40 13:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:57 Get A/D filter: -9.255963e+061 result=40 13:35:57 Get A/D value=-858993460 result=40 13:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:57 Parameters OK 13:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:57 Set A/D data flow result=40 13:35:57 Set A/D channel type result=40 13:35:57 Set A/D encoding result=40 13:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:57 Set channel filter=0.000000e+000 result=40 13:35:57 Config A/D Result=40 13:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:57 Get A/D filter: -9.255963e+061 result=40 13:35:57 Get A/D value=-858993460 result=40 13:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:57 Aux= 13:35:57 Message to Camera, serial 144176 queued 13:36:05 Received message from Master: op=Shutter serial=144186 13:36:05 Shutter LASER close 13:36:06 Received message from Master: op=PointingHead serial=144190 13:36:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:36:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:36:06 Point started: ret=0 13:36:06 point_skyscan result=0 13:36:07 Check angles 13:36:07 SkyScan query 13:36:08 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.205<-21547 Statuses=0009 0009 13:36:08 Msec=0 True Az=135.99 Ze=-143.205 Az status=0009 Ze status=0009 13:36:08 Check angles 13:36:08 SkyScan query 13:36:09 SkyScan query done: ret=0 az=153.855<-10257 ze=-121.8<-20120 Statuses=0009 0009 13:36:09 Msec=750 True Az=153.855 Ze=-121.8 Az status=0009 Ze status=0009 13:36:09 Check angles 13:36:09 SkyScan query 13:36:09 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.77<-18718 Statuses=0009 0009 13:36:09 Msec=1500 True Az=171.465 Ze=-100.77 Az status=0009 Ze status=0009 13:36:09 Check angles 13:36:09 SkyScan query 13:36:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.905<-17327 Statuses=0008 0009 13:36:10 Msec=2250 True Az=176.01 Ze=-79.905 Az status=0008 Ze status=0009 13:36:10 Check angles 13:36:10 SkyScan query 13:36:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.905<-15927 Statuses=0008 0009 13:36:11 Msec=3000 True Az=176.01 Ze=-58.905 Az status=0008 Ze status=0009 13:36:11 Check angles 13:36:11 SkyScan query 13:36:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 13:36:12 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 13:36:12 Message to Master queued w/err=0: serial=144190 error=0 13:36:17 Received message from Master: op=Filter serial=144191 13:36:17 Color wheel filter change from 0 to 0 13:36:17 FLIGetFilterPos err=0 currentPosition=0 13:36:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:17 Filter is already there-color wheel unchanged 13:36:17 Received message from Master: op=Shutter serial=144192 13:36:17 Shutter LASER close 13:36:17 Received message from Camera: op=State serial=144194 13:36:17 GetSingleValue result=40 Value=cccccccc 13:36:17 SkyScan query 13:36:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:36:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:17 Parameters OK 13:36:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:17 Set A/D data flow result=40 13:36:17 Set A/D channel type result=40 13:36:17 Set A/D encoding result=40 13:36:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:17 Set channel filter=0.000000e+000 result=40 13:36:17 Config A/D Result=40 13:36:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:17 Get A/D filter: -9.255963e+061 result=40 13:36:17 Get A/D value=-858993460 result=40 13:36:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:17 Parameters OK 13:36:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:17 Set A/D data flow result=40 13:36:17 Set A/D channel type result=40 13:36:17 Set A/D encoding result=40 13:36:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:17 Set channel filter=0.000000e+000 result=40 13:36:17 Config A/D Result=40 13:36:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:17 Get A/D filter: -9.255963e+061 result=40 13:36:17 Get A/D value=-858993460 result=40 13:36:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:17 Aux= 13:36:17 Message to Camera, serial 144194 queued 13:36:54 Received message from Master: op=PointingHead serial=144207 13:36:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:36:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:36:55 Point started: ret=0 13:36:55 point_skyscan result=0 13:36:55 Check angles 13:36:55 SkyScan query 13:36:56 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.84<-13456 Statuses=0009 0009 13:36:56 Msec=0 True Az=152.91 Ze=-21.84 Az status=0009 Ze status=0009 13:36:56 Check angles 13:36:56 SkyScan query 13:36:57 SkyScan query done: ret=0 az=135.075<-9005 ze=-0.42<-12028 Statuses=0009 0009 13:36:57 Msec=750 True Az=135.075 Ze=-0.42 Az status=0009 Ze status=0009 13:36:57 Check angles 13:36:57 SkyScan query 13:36:58 SkyScan query done: ret=0 az=117.135<-7809 ze=21.03<-10598 Statuses=0009 0009 13:36:58 Msec=1500 True Az=117.135 Ze=21.03 Az status=0009 Ze status=0009 13:36:58 Check angles 13:36:58 SkyScan query 13:36:58 SkyScan query done: ret=0 az=99.705<-6647 ze=41.94<-9204 Statuses=0009 0009 13:36:58 Msec=2250 True Az=99.705 Ze=41.94 Az status=0009 Ze status=0009 13:36:58 Check angles 13:36:58 SkyScan query 13:36:59 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 13:36:59 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 13:36:59 Check angles 13:36:59 SkyScan query 13:37:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:37:00 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 13:37:00 Message to Master queued w/err=0: serial=144207 error=0 13:37:05 Received message from Master: op=Filter serial=144208 13:37:05 Color wheel filter change from 0 to 0 13:37:05 FLIGetFilterPos err=0 currentPosition=0 13:37:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:05 Filter is already there-color wheel unchanged 13:37:05 Received message from Master: op=Shutter serial=144209 13:37:05 Shutter LASER close 13:37:05 Received message from Camera: op=State serial=144211 13:37:05 GetSingleValue result=40 Value=cccccccc 13:37:05 SkyScan query 13:37:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:37:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:06 Parameters OK 13:37:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:06 Set A/D data flow result=40 13:37:06 Set A/D channel type result=40 13:37:06 Set A/D encoding result=40 13:37:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:06 Set channel filter=0.000000e+000 result=40 13:37:06 Config A/D Result=40 13:37:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:06 Get A/D filter: -9.255963e+061 result=40 13:37:06 Get A/D value=-858993460 result=40 13:37:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:06 Parameters OK 13:37:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:06 Set A/D data flow result=40 13:37:06 Set A/D channel type result=40 13:37:06 Set A/D encoding result=40 13:37:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:06 Set channel filter=0.000000e+000 result=40 13:37:06 Config A/D Result=40 13:37:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:06 Get A/D filter: -9.255963e+061 result=40 13:37:06 Get A/D value=-858993460 result=40 13:37:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:06 Aux= 13:37:06 Message to Camera, serial 144211 queued 13:37:42 Received message from Master: op=PointingHead serial=144224 13:37:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:37:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:37:43 Point started: ret=0 13:37:43 point_skyscan result=0 13:37:44 Check angles 13:37:44 SkyScan query 13:37:44 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 13:37:44 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 13:37:44 Check angles 13:37:44 SkyScan query 13:37:45 SkyScan query done: ret=0 az=126.36<-8424 ze=38.49<-9434 Statuses=0009 0008 13:37:45 Msec=750 True Az=126.36 Ze=38.49 Az status=0009 Ze status=0008 13:37:45 Check angles 13:37:45 SkyScan query 13:37:46 SkyScan query done: ret=0 az=144.06<-9604 ze=38.505<-9433 Statuses=0009 0008 13:37:46 Msec=1500 True Az=144.06 Ze=38.505 Az status=0009 Ze status=0008 13:37:46 Check angles 13:37:46 SkyScan query 13:37:46 SkyScan query done: ret=0 az=161.49<-10766 ze=38.505<-9433 Statuses=0009 0008 13:37:46 Msec=2250 True Az=161.49 Ze=38.505 Az status=0009 Ze status=0008 13:37:47 Check angles 13:37:47 SkyScan query 13:37:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:37:47 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:37:47 Check angles 13:37:47 SkyScan query 13:37:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:37:48 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:37:48 Message to Master queued w/err=0: serial=144224 error=0 13:37:53 Received message from Master: op=Filter serial=144225 13:37:53 Color wheel filter change from 0 to 0 13:37:53 FLIGetFilterPos err=0 currentPosition=0 13:37:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:53 Filter is already there-color wheel unchanged 13:37:53 Received message from Master: op=Shutter serial=144226 13:37:53 Shutter LASER close 13:37:53 Received message from Camera: op=State serial=144228 13:37:53 GetSingleValue result=40 Value=cccccccc 13:37:53 SkyScan query 13:37:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:37:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:54 Parameters OK 13:37:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:54 Set A/D data flow result=40 13:37:54 Set A/D channel type result=40 13:37:54 Set A/D encoding result=40 13:37:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:54 Set channel filter=0.000000e+000 result=40 13:37:54 Config A/D Result=40 13:37:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:54 Get A/D filter: -9.255963e+061 result=40 13:37:54 Get A/D value=-858993460 result=40 13:37:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:54 Parameters OK 13:37:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:54 Set A/D data flow result=40 13:37:54 Set A/D channel type result=40 13:37:54 Set A/D encoding result=40 13:37:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:54 Set channel filter=0.000000e+000 result=40 13:37:54 Config A/D Result=40 13:37:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:54 Get A/D filter: -9.255963e+061 result=40 13:37:54 Get A/D value=-858993460 result=40 13:37:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:54 Aux= 13:37:54 Message to Camera, serial 144228 queued 13:38:30 Received message from Master: op=PointingHead serial=144241 13:38:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:38:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:38:31 Point started: ret=0 13:38:31 point_skyscan result=0 13:38:32 Check angles 13:38:32 SkyScan query 13:38:32 SkyScan query done: ret=0 az=152.76<-10184 ze=8.445<-11437 Statuses=0009 0009 13:38:32 Msec=0 True Az=152.76 Ze=8.445 Az status=0009 Ze status=0009 13:38:32 Check angles 13:38:32 SkyScan query 13:38:33 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.48<-12832 Statuses=0009 0009 13:38:33 Msec=750 True Az=135.315 Ze=-12.48 Az status=0009 Ze status=0009 13:38:33 Check angles 13:38:33 SkyScan query 13:38:34 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.48<-14232 Statuses=0009 0009 13:38:34 Msec=1500 True Az=117.825 Ze=-33.48 Az status=0009 Ze status=0009 13:38:34 Check angles 13:38:34 SkyScan query 13:38:34 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.555<-15437 Statuses=0009 0009 13:38:34 Msec=2250 True Az=100.425 Ze=-51.555 Az status=0009 Ze status=0009 13:38:35 Check angles 13:38:35 SkyScan query 13:38:35 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:38:35 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:38:35 Check angles 13:38:35 SkyScan query 13:38:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:38:36 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:38:36 Message to Master queued w/err=0: serial=144241 error=0 13:38:41 Received message from Master: op=Filter serial=144242 13:38:41 Color wheel filter change from 0 to 0 13:38:41 FLIGetFilterPos err=0 currentPosition=0 13:38:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:41 Filter is already there-color wheel unchanged 13:38:41 Received message from Master: op=Shutter serial=144243 13:38:41 Shutter LASER close 13:38:41 Received message from Camera: op=State serial=144245 13:38:41 GetSingleValue result=40 Value=cccccccc 13:38:41 SkyScan query 13:38:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:38:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:42 Parameters OK 13:38:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:42 Set A/D data flow result=40 13:38:42 Set A/D channel type result=40 13:38:42 Set A/D encoding result=40 13:38:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:42 Set channel filter=0.000000e+000 result=40 13:38:42 Config A/D Result=40 13:38:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:42 Get A/D filter: -9.255963e+061 result=40 13:38:42 Get A/D value=-858993460 result=40 13:38:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:42 Parameters OK 13:38:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:42 Set A/D data flow result=40 13:38:42 Set A/D channel type result=40 13:38:42 Set A/D encoding result=40 13:38:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:42 Set channel filter=0.000000e+000 result=40 13:38:42 Config A/D Result=40 13:38:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:42 Get A/D filter: -9.255963e+061 result=40 13:38:42 Get A/D value=-858993460 result=40 13:38:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:42 Aux= 13:38:42 Message to Camera, serial 144245 queued 13:39:19 Received message from Master: op=PointingHead serial=144258 13:39:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:39:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:39:19 Point started: ret=0 13:39:19 point_skyscan result=0 13:39:20 Check angles 13:39:20 SkyScan query 13:39:20 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.09<-17406 Statuses=0009 0009 13:39:20 Msec=0 True Az=108.915 Ze=-81.09 Az status=0009 Ze status=0009 13:39:20 Check angles 13:39:20 SkyScan query 13:39:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 13:39:21 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 13:39:21 Check angles 13:39:21 SkyScan query 13:39:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.03<-20202 Statuses=0008 0009 13:39:22 Msec=1500 True Az=112.995 Ze=-123.03 Az status=0008 Ze status=0009 13:39:22 Check angles 13:39:22 SkyScan query 13:39:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.985<-21599 Statuses=0008 0009 13:39:22 Msec=2250 True Az=112.995 Ze=-143.985 Az status=0008 Ze status=0009 13:39:23 Check angles 13:39:23 SkyScan query 13:39:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.94<-22996 Statuses=0008 0009 13:39:23 Msec=3000 True Az=112.995 Ze=-164.94 Az status=0008 Ze status=0009 13:39:23 Check angles 13:39:23 SkyScan query 13:39:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 13:39:24 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 13:39:24 Message to Master queued w/err=0: serial=144258 error=0 13:39:29 Received message from Master: op=Filter serial=144259 13:39:29 Color wheel filter change from 0 to 0 13:39:29 FLIGetFilterPos err=0 currentPosition=0 13:39:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:29 Filter is already there-color wheel unchanged 13:39:29 Received message from Master: op=Shutter serial=144260 13:39:29 Shutter LASER open 13:39:29 Received message from Camera: op=State serial=144262 13:39:29 GetSingleValue result=40 Value=cccccccc 13:39:29 SkyScan query 13:39:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:39:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:30 Parameters OK 13:39:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:30 Set A/D data flow result=40 13:39:30 Set A/D channel type result=40 13:39:30 Set A/D encoding result=40 13:39:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:30 Set channel filter=0.000000e+000 result=40 13:39:30 Config A/D Result=40 13:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:30 Get A/D filter: -9.255963e+061 result=40 13:39:30 Get A/D value=-858993460 result=40 13:39:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:30 Parameters OK 13:39:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:30 Set A/D data flow result=40 13:39:30 Set A/D channel type result=40 13:39:30 Set A/D encoding result=40 13:39:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:30 Set channel filter=0.000000e+000 result=40 13:39:30 Config A/D Result=40 13:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:30 Get A/D filter: -9.255963e+061 result=40 13:39:30 Get A/D value=-858993460 result=40 13:39:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:30 Aux= 13:39:30 Message to Camera, serial 144262 queued 13:39:38 Received message from Master: op=Shutter serial=144272 13:39:38 Shutter LASER close 13:39:39 Received message from Master: op=PointingHead serial=144276 13:39:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:39:39 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:39:39 Point started: ret=0 13:39:39 point_skyscan result=0 13:39:40 Check angles 13:39:40 SkyScan query 13:39:40 SkyScan query done: ret=0 az=90.12<-6008 ze=157.515<-1499 Statuses=0009 0009 13:39:40 Msec=0 True Az=90.12 Ze=157.515 Az status=0009 Ze status=0009 13:39:41 Check angles 13:39:41 SkyScan query 13:39:41 SkyScan query done: ret=0 az=72.255<-4817 ze=136.11<-2926 Statuses=0009 0009 13:39:41 Msec=750 True Az=72.255 Ze=136.11 Az status=0009 Ze status=0009 13:39:41 Check angles 13:39:41 SkyScan query 13:39:42 SkyScan query done: ret=0 az=54.765<-3651 ze=115.185<-4321 Statuses=0009 0009 13:39:42 Msec=1500 True Az=54.765 Ze=115.185 Az status=0009 Ze status=0009 13:39:42 Check angles 13:39:42 SkyScan query 13:39:43 SkyScan query done: ret=0 az=40.965<-2731 ze=94.2<-5720 Statuses=0009 0009 13:39:43 Msec=2250 True Az=40.965 Ze=94.2 Az status=0009 Ze status=0009 13:39:43 Check angles 13:39:43 SkyScan query 13:39:44 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 13:39:44 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 13:39:44 Check angles 13:39:44 SkyScan query 13:39:44 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 13:39:44 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 13:39:44 Check angles 13:39:44 SkyScan query 13:39:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:39:45 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:39:45 Message to Master queued w/err=0: serial=144276 error=0 13:39:50 Received message from Master: op=Filter serial=144277 13:39:50 Color wheel filter change from 0 to 0 13:39:50 FLIGetFilterPos err=0 currentPosition=0 13:39:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:50 Filter is already there-color wheel unchanged 13:39:50 Received message from Master: op=Shutter serial=144278 13:39:50 Shutter LASER close 13:39:50 Received message from Camera: op=State serial=144280 13:39:50 GetSingleValue result=40 Value=cccccccc 13:39:50 SkyScan query 13:39:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:39:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:51 Parameters OK 13:39:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:51 Set A/D data flow result=40 13:39:51 Set A/D channel type result=40 13:39:51 Set A/D encoding result=40 13:39:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:51 Set channel filter=0.000000e+000 result=40 13:39:51 Config A/D Result=40 13:39:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:51 Get A/D filter: -9.255963e+061 result=40 13:39:51 Get A/D value=-858993460 result=40 13:39:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:51 Parameters OK 13:39:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:51 Set A/D data flow result=40 13:39:51 Set A/D channel type result=40 13:39:51 Set A/D encoding result=40 13:39:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:51 Set channel filter=0.000000e+000 result=40 13:39:51 Config A/D Result=40 13:39:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:51 Get A/D filter: -9.255963e+061 result=40 13:39:51 Get A/D value=-858993460 result=40 13:39:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:51 Aux= 13:39:51 Message to Camera, serial 144280 queued 13:40:28 Received message from Master: op=PointingHead serial=144293 13:40:28 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:40:28 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:40:28 Point started: ret=0 13:40:28 point_skyscan result=0 13:40:29 Check angles 13:40:29 SkyScan query 13:40:29 SkyScan query done: ret=0 az=64.335<-4289 ze=66.555<-7563 Statuses=0009 0008 13:40:29 Msec=0 True Az=64.335 Ze=66.555 Az status=0009 Ze status=0008 13:40:30 Check angles 13:40:30 SkyScan query 13:40:30 SkyScan query done: ret=0 az=82.275<-5485 ze=66.495<-7567 Statuses=0009 0008 13:40:30 Msec=750 True Az=82.275 Ze=66.495 Az status=0009 Ze status=0008 13:40:30 Check angles 13:40:30 SkyScan query 13:40:31 SkyScan query done: ret=0 az=99.645<-6643 ze=66.495<-7567 Statuses=0009 0008 13:40:31 Msec=1500 True Az=99.645 Ze=66.495 Az status=0009 Ze status=0008 13:40:31 Check angles 13:40:31 SkyScan query 13:40:32 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 13:40:32 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 13:40:32 Check angles 13:40:32 SkyScan query 13:40:32 SkyScan query done: ret=0 az=134.67<-8978 ze=66.495<-7567 Statuses=0009 0008 13:40:32 Msec=3000 True Az=134.67 Ze=66.495 Az status=0009 Ze status=0008 13:40:33 Check angles 13:40:33 SkyScan query 13:40:33 SkyScan query done: ret=0 az=151.95<-10130 ze=66.495<-7567 Statuses=0009 0008 13:40:33 Msec=3750 True Az=151.95 Ze=66.495 Az status=0009 Ze status=0008 13:40:33 Check angles 13:40:33 SkyScan query 13:40:34 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 13:40:34 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 13:40:34 Message to Master queued w/err=0: serial=144293 error=0 13:40:39 Received message from Master: op=Filter serial=144294 13:40:39 Color wheel filter change from 0 to 0 13:40:39 FLIGetFilterPos err=0 currentPosition=0 13:40:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:39 Filter is already there-color wheel unchanged 13:40:39 Received message from Master: op=Shutter serial=144295 13:40:39 Shutter LASER close 13:40:39 Received message from Camera: op=State serial=144297 13:40:39 GetSingleValue result=40 Value=cccccccc 13:40:39 SkyScan query 13:40:40 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:40:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:40 Parameters OK 13:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:40 Set A/D data flow result=40 13:40:40 Set A/D channel type result=40 13:40:40 Set A/D encoding result=40 13:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:40 Set channel filter=0.000000e+000 result=40 13:40:40 Config A/D Result=40 13:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:40 Get A/D filter: -9.255963e+061 result=40 13:40:40 Get A/D value=-858993460 result=40 13:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:40 Parameters OK 13:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:40 Set A/D data flow result=40 13:40:40 Set A/D channel type result=40 13:40:40 Set A/D encoding result=40 13:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:40 Set channel filter=0.000000e+000 result=40 13:40:40 Config A/D Result=40 13:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:40 Get A/D filter: -9.255963e+061 result=40 13:40:40 Get A/D value=-858993460 result=40 13:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:40 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:40 Aux= 13:40:40 Message to Camera, serial 144297 queued 13:41:17 Received message from Master: op=PointingHead serial=144310 13:41:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:41:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:41:17 Point started: ret=0 13:41:17 point_skyscan result=0 13:41:18 Check angles 13:41:18 SkyScan query 13:41:18 SkyScan query done: ret=0 az=135.225<-9015 ze=37.005<-9533 Statuses=0009 0009 13:41:18 Msec=0 True Az=135.225 Ze=37.005 Az status=0009 Ze status=0009 13:41:18 Check angles 13:41:18 SkyScan query 13:41:19 SkyScan query done: ret=0 az=117.765<-7851 ze=16.02<-10932 Statuses=0009 0009 13:41:19 Msec=750 True Az=117.765 Ze=16.02 Az status=0009 Ze status=0009 13:41:19 Check angles 13:41:19 SkyScan query 13:41:20 SkyScan query done: ret=0 az=100.335<-6689 ze=-4.89<-12326 Statuses=0009 0009 13:41:20 Msec=1500 True Az=100.335 Ze=-4.89 Az status=0009 Ze status=0009 13:41:20 Check angles 13:41:20 SkyScan query 13:41:21 SkyScan query done: ret=0 az=82.515<-5501 ze=-26.265<-13751 Statuses=0009 0009 13:41:21 Msec=2250 True Az=82.515 Ze=-26.265 Az status=0009 Ze status=0009 13:41:21 Check angles 13:41:21 SkyScan query 13:41:21 SkyScan query done: ret=0 az=64.59<-4306 ze=-38.595<-14573 Statuses=0009 0008 13:41:21 Msec=3000 True Az=64.59 Ze=-38.595 Az status=0009 Ze status=0008 13:41:21 Check angles 13:41:21 SkyScan query 13:41:22 SkyScan query done: ret=0 az=47.175<-3145 ze=-38.52<-14568 Statuses=0009 0008 13:41:22 Msec=3750 True Az=47.175 Ze=-38.52 Az status=0009 Ze status=0008 13:41:22 Check angles 13:41:22 SkyScan query 13:41:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:41:23 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:41:23 Message to Master queued w/err=0: serial=144310 error=0 13:41:28 Received message from Master: op=Filter serial=144311 13:41:28 Color wheel filter change from 0 to 0 13:41:28 FLIGetFilterPos err=0 currentPosition=0 13:41:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:28 Filter is already there-color wheel unchanged 13:41:28 Received message from Master: op=Shutter serial=144312 13:41:28 Shutter LASER close 13:41:28 Received message from Camera: op=State serial=144314 13:41:28 GetSingleValue result=40 Value=cccccccc 13:41:28 SkyScan query 13:41:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:41:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:29 Parameters OK 13:41:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:29 Set A/D data flow result=40 13:41:29 Set A/D channel type result=40 13:41:29 Set A/D encoding result=40 13:41:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:29 Set channel filter=0.000000e+000 result=40 13:41:29 Config A/D Result=40 13:41:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:29 Get A/D filter: -9.255963e+061 result=40 13:41:29 Get A/D value=-858993460 result=40 13:41:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:29 Parameters OK 13:41:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:29 Set A/D data flow result=40 13:41:29 Set A/D channel type result=40 13:41:29 Set A/D encoding result=40 13:41:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:29 Set channel filter=0.000000e+000 result=40 13:41:29 Config A/D Result=40 13:41:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:29 Get A/D filter: -9.255963e+061 result=40 13:41:29 Get A/D value=-858993460 result=40 13:41:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:29 Aux= 13:41:29 Message to Camera, serial 144314 queued 13:42:05 Received message from Master: op=PointingHead serial=144326 13:42:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:42:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:42:05 Point started: ret=0 13:42:05 point_skyscan result=0 13:42:06 Check angles 13:42:06 SkyScan query 13:42:06 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.655<-16577 Statuses=0009 0009 13:42:06 Msec=0 True Az=64.185 Ze=-68.655 Az status=0009 Ze status=0009 13:42:06 Check angles 13:42:06 SkyScan query 13:42:07 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.61<-17974 Statuses=0009 0009 13:42:07 Msec=750 True Az=81.78 Ze=-89.61 Az status=0009 Ze status=0009 13:42:07 Check angles 13:42:07 SkyScan query 13:42:08 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.595<-19373 Statuses=0009 0009 13:42:08 Msec=1500 True Az=99.195 Ze=-110.595 Az status=0009 Ze status=0009 13:42:08 Check angles 13:42:08 SkyScan query 13:42:08 SkyScan query done: ret=0 az=116.67<-7778 ze=-131.46<-20764 Statuses=0009 0009 13:42:08 Msec=2250 True Az=116.67 Ze=-131.46 Az status=0009 Ze status=0009 13:42:09 Check angles 13:42:09 SkyScan query 13:42:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 13:42:09 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 13:42:09 Check angles 13:42:09 SkyScan query 13:42:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 13:42:10 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 13:42:10 Message to Master queued w/err=0: serial=144326 error=0 13:42:15 Received message from Master: op=Filter serial=144327 13:42:15 Color wheel filter change from 0 to 0 13:42:15 FLIGetFilterPos err=0 currentPosition=0 13:42:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:15 Filter is already there-color wheel unchanged 13:42:15 Received message from Master: op=Shutter serial=144328 13:42:15 Shutter LASER close 13:42:15 Received message from Camera: op=State serial=144330 13:42:15 GetSingleValue result=40 Value=cccccccc 13:42:15 SkyScan query 13:42:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:42:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:16 Parameters OK 13:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:16 Set A/D data flow result=40 13:42:16 Set A/D channel type result=40 13:42:16 Set A/D encoding result=40 13:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:16 Set channel filter=0.000000e+000 result=40 13:42:16 Config A/D Result=40 13:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:16 Get A/D filter: -9.255963e+061 result=40 13:42:16 Get A/D value=-858993460 result=40 13:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:16 Parameters OK 13:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:16 Set A/D data flow result=40 13:42:16 Set A/D channel type result=40 13:42:16 Set A/D encoding result=40 13:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:16 Set channel filter=0.000000e+000 result=40 13:42:16 Config A/D Result=40 13:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:16 Get A/D filter: -9.255963e+061 result=40 13:42:16 Get A/D value=-858993460 result=40 13:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:16 Aux= 13:42:16 Message to Camera, serial 144330 queued 13:42:53 Received message from Master: op=PointingHead serial=144343 13:42:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:42:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:42:53 Point started: ret=0 13:42:53 point_skyscan result=0 13:42:54 Check angles 13:42:54 SkyScan query 13:42:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0009 0009 13:42:54 Msec=0 True Az=112.995 Ze=-171.3 Az status=0009 Ze status=0009 13:42:55 Check angles 13:42:55 SkyScan query 13:42:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:42:55 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:42:55 Message to Master queued w/err=0: serial=144343 error=0 13:43:00 Received message from Master: op=Filter serial=144344 13:43:00 Color wheel filter change from 0 to 0 13:43:00 FLIGetFilterPos err=0 currentPosition=0 13:43:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:00 Filter is already there-color wheel unchanged 13:43:00 Received message from Master: op=Shutter serial=144345 13:43:00 Shutter LASER open 13:43:00 Received message from Camera: op=State serial=144347 13:43:00 GetSingleValue result=40 Value=cccccccc 13:43:00 SkyScan query 13:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:43:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:01 Parameters OK 13:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:01 Set A/D data flow result=40 13:43:01 Set A/D channel type result=40 13:43:01 Set A/D encoding result=40 13:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:01 Set channel filter=0.000000e+000 result=40 13:43:01 Config A/D Result=40 13:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:01 Get A/D filter: -9.255963e+061 result=40 13:43:01 Get A/D value=-858993460 result=40 13:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:01 Parameters OK 13:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:01 Set A/D data flow result=40 13:43:01 Set A/D channel type result=40 13:43:01 Set A/D encoding result=40 13:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:01 Set channel filter=0.000000e+000 result=40 13:43:01 Config A/D Result=40 13:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:01 Get A/D filter: -9.255963e+061 result=40 13:43:01 Get A/D value=-858993460 result=40 13:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:01 Aux= 13:43:01 Message to Camera, serial 144347 queued 13:43:09 Received message from Master: op=Shutter serial=144357 13:43:09 Shutter LASER close 13:43:10 Received message from Master: op=PointingHead serial=144361 13:43:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:43:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:43:10 Point started: ret=0 13:43:10 point_skyscan result=0 13:43:11 Check angles 13:43:11 SkyScan query 13:43:12 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.505<-21567 Statuses=0009 0009 13:43:12 Msec=0 True Az=135.72 Ze=-143.505 Az status=0009 Ze status=0009 13:43:12 Check angles 13:43:12 SkyScan query 13:43:12 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.505<-20167 Statuses=0009 0009 13:43:12 Msec=750 True Az=153.225 Ze=-122.505 Az status=0009 Ze status=0009 13:43:13 Check angles 13:43:13 SkyScan query 13:43:13 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.13<-18742 Statuses=0009 0009 13:43:13 Msec=1500 True Az=171.105 Ze=-101.13 Az status=0009 Ze status=0009 13:43:13 Check angles 13:43:13 SkyScan query 13:43:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.22<-17348 Statuses=0008 0009 13:43:14 Msec=2250 True Az=176.01 Ze=-80.22 Az status=0008 Ze status=0009 13:43:14 Check angles 13:43:14 SkyScan query 13:43:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.235<-15949 Statuses=0008 0009 13:43:15 Msec=3000 True Az=176.01 Ze=-59.235 Az status=0008 Ze status=0009 13:43:15 Check angles 13:43:15 SkyScan query 13:43:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 13:43:15 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 13:43:15 Message to Master queued w/err=0: serial=144361 error=0 13:43:20 Received message from Master: op=Filter serial=144362 13:43:20 Color wheel filter change from 0 to 0 13:43:20 FLIGetFilterPos err=0 currentPosition=0 13:43:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:20 Filter is already there-color wheel unchanged 13:43:21 Received message from Master: op=Shutter serial=144363 13:43:21 Shutter LASER close 13:43:21 Received message from Camera: op=State serial=144365 13:43:21 GetSingleValue result=40 Value=cccccccc 13:43:21 SkyScan query 13:43:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:43:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:21 Parameters OK 13:43:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:21 Set A/D data flow result=40 13:43:21 Set A/D channel type result=40 13:43:21 Set A/D encoding result=40 13:43:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:21 Set channel filter=0.000000e+000 result=40 13:43:21 Config A/D Result=40 13:43:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:21 Get A/D filter: -9.255963e+061 result=40 13:43:21 Get A/D value=-858993460 result=40 13:43:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:21 Parameters OK 13:43:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:21 Set A/D data flow result=40 13:43:21 Set A/D channel type result=40 13:43:21 Set A/D encoding result=40 13:43:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:21 Set channel filter=0.000000e+000 result=40 13:43:21 Config A/D Result=40 13:43:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:21 Get A/D filter: -9.255963e+061 result=40 13:43:21 Get A/D value=-858993460 result=40 13:43:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:21 Aux= 13:43:21 Message to Camera, serial 144365 queued 13:43:58 Received message from Master: op=PointingHead serial=144378 13:43:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:43:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:43:59 Point started: ret=0 13:43:59 point_skyscan result=0 13:43:59 Check angles 13:43:59 SkyScan query 13:44:00 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.84<-13456 Statuses=0009 0009 13:44:00 Msec=0 True Az=152.955 Ze=-21.84 Az status=0009 Ze status=0009 13:44:00 Check angles 13:44:00 SkyScan query 13:44:01 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.855<-12057 Statuses=0009 0009 13:44:01 Msec=750 True Az=135.585 Ze=-0.855 Az status=0009 Ze status=0009 13:44:01 Check angles 13:44:01 SkyScan query 13:44:01 SkyScan query done: ret=0 az=118.05<-7870 ze=20.07<-10662 Statuses=0009 0009 13:44:01 Msec=1500 True Az=118.05 Ze=20.07 Az status=0009 Ze status=0009 13:44:02 Check angles 13:44:02 SkyScan query 13:44:02 SkyScan query done: ret=0 az=100.65<-6710 ze=41.055<-9263 Statuses=0009 0009 13:44:02 Msec=2250 True Az=100.65 Ze=41.055 Az status=0009 Ze status=0009 13:44:02 Check angles 13:44:02 SkyScan query 13:44:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 13:44:03 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 13:44:03 Check angles 13:44:03 SkyScan query 13:44:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:44:04 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:44:04 Message to Master queued w/err=0: serial=144378 error=0 13:44:09 Received message from Master: op=Filter serial=144379 13:44:09 Color wheel filter change from 0 to 0 13:44:09 FLIGetFilterPos err=0 currentPosition=0 13:44:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:09 Filter is already there-color wheel unchanged 13:44:09 Received message from Master: op=Shutter serial=144380 13:44:09 Shutter LASER close 13:44:09 Received message from Camera: op=State serial=144382 13:44:09 GetSingleValue result=40 Value=cccccccc 13:44:09 SkyScan query 13:44:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:44:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:09 Parameters OK 13:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:09 Set A/D data flow result=40 13:44:09 Set A/D channel type result=40 13:44:09 Set A/D encoding result=40 13:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:09 Set channel filter=0.000000e+000 result=40 13:44:09 Config A/D Result=40 13:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:09 Get A/D filter: -9.255963e+061 result=40 13:44:09 Get A/D value=-858993460 result=40 13:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:09 Parameters OK 13:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:09 Set A/D data flow result=40 13:44:09 Set A/D channel type result=40 13:44:09 Set A/D encoding result=40 13:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:09 Set channel filter=0.000000e+000 result=40 13:44:09 Config A/D Result=40 13:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:09 Get A/D filter: -9.255963e+061 result=40 13:44:09 Get A/D value=-858993460 result=40 13:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:09 Aux= 13:44:09 Message to Camera, serial 144382 queued 13:44:46 Received message from Master: op=PointingHead serial=144395 13:44:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:44:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:44:47 Point started: ret=0 13:44:47 point_skyscan result=0 13:44:47 Check angles 13:44:47 SkyScan query 13:44:48 SkyScan query done: ret=0 az=108.78<-7252 ze=38.475<-9435 Statuses=0009 0008 13:44:48 Msec=0 True Az=108.78 Ze=38.475 Az status=0009 Ze status=0008 13:44:48 Check angles 13:44:48 SkyScan query 13:44:49 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 13:44:49 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 13:44:49 Check angles 13:44:49 SkyScan query 13:44:49 SkyScan query done: ret=0 az=143.79<-9586 ze=38.505<-9433 Statuses=0009 0008 13:44:49 Msec=1500 True Az=143.79 Ze=38.505 Az status=0009 Ze status=0008 13:44:50 Check angles 13:44:50 SkyScan query 13:44:50 SkyScan query done: ret=0 az=161.145<-10743 ze=38.505<-9433 Statuses=0009 0008 13:44:50 Msec=2250 True Az=161.145 Ze=38.505 Az status=0009 Ze status=0008 13:44:50 Check angles 13:44:50 SkyScan query 13:44:51 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:44:51 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:44:51 Check angles 13:44:51 SkyScan query 13:44:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:44:52 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:44:52 Message to Master queued w/err=0: serial=144395 error=0 13:44:57 Received message from Master: op=Filter serial=144396 13:44:57 Color wheel filter change from 0 to 0 13:44:57 FLIGetFilterPos err=0 currentPosition=0 13:44:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:57 Filter is already there-color wheel unchanged 13:44:57 Received message from Master: op=Shutter serial=144397 13:44:57 Shutter LASER close 13:44:57 Received message from Camera: op=State serial=144399 13:44:57 GetSingleValue result=40 Value=cccccccc 13:44:57 SkyScan query 13:44:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:44:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:57 Parameters OK 13:44:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:57 Set A/D data flow result=40 13:44:57 Set A/D channel type result=40 13:44:57 Set A/D encoding result=40 13:44:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:57 Set channel filter=0.000000e+000 result=40 13:44:57 Config A/D Result=40 13:44:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:57 Get A/D filter: -9.255963e+061 result=40 13:44:57 Get A/D value=-858993460 result=40 13:44:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:57 Parameters OK 13:44:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:57 Set A/D data flow result=40 13:44:57 Set A/D channel type result=40 13:44:57 Set A/D encoding result=40 13:44:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:57 Set channel filter=0.000000e+000 result=40 13:44:57 Config A/D Result=40 13:44:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:57 Get A/D filter: -9.255963e+061 result=40 13:44:57 Get A/D value=-858993460 result=40 13:44:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:57 Aux= 13:44:57 Message to Camera, serial 144399 queued 13:45:27 Received message from Master: op=Identify serial=144401 13:45:34 Received message from Master: op=PointingHead serial=144415 13:45:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:45:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:45:35 Point started: ret=0 13:45:35 point_skyscan result=0 13:45:35 Check angles 13:45:35 SkyScan query 13:45:36 SkyScan query done: ret=0 az=152.715<-10181 ze=8.355<-11443 Statuses=0009 0009 13:45:36 Msec=0 True Az=152.715 Ze=8.355 Az status=0009 Ze status=0009 13:45:36 Check angles 13:45:36 SkyScan query 13:45:37 SkyScan query done: ret=0 az=135.105<-9007 ze=-12.705<-12847 Statuses=0009 0009 13:45:37 Msec=750 True Az=135.105 Ze=-12.705 Az status=0009 Ze status=0009 13:45:37 Check angles 13:45:37 SkyScan query 13:45:37 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.525<-14235 Statuses=0009 0009 13:45:37 Msec=1500 True Az=117.585 Ze=-33.525 Az status=0009 Ze status=0009 13:45:38 Check angles 13:45:38 SkyScan query 13:45:38 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.57<-15438 Statuses=0009 0009 13:45:38 Msec=2250 True Az=100.23 Ze=-51.57 Az status=0009 Ze status=0009 13:45:38 Check angles 13:45:38 SkyScan query 13:45:39 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 13:45:39 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 13:45:39 Check angles 13:45:39 SkyScan query 13:45:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:45:40 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:45:40 Message to Master queued w/err=0: serial=144415 error=0 13:45:45 Received message from Master: op=Filter serial=144416 13:45:45 Color wheel filter change from 0 to 0 [UTC 2018-12-14 13:45:45] 13:45:45 FLIGetFilterPos err=0 currentPosition=0 13:45:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:45 Filter is already there-color wheel unchanged 13:45:45 Received message from Master: op=Shutter serial=144417 13:45:45 Shutter LASER close 13:45:45 Received message from Camera: op=State serial=144419 13:45:45 GetSingleValue result=40 Value=cccccccc 13:45:45 SkyScan query 13:45:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:45:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:46 Parameters OK 13:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:46 Set A/D data flow result=40 13:45:46 Set A/D channel type result=40 13:45:46 Set A/D encoding result=40 13:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:46 Set channel filter=0.000000e+000 result=40 13:45:46 Config A/D Result=40 13:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:46 Get A/D filter: -9.255963e+061 result=40 13:45:46 Get A/D value=-858993460 result=40 13:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:46 Parameters OK 13:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:46 Set A/D data flow result=40 13:45:46 Set A/D channel type result=40 13:45:46 Set A/D encoding result=40 13:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:46 Set channel filter=0.000000e+000 result=40 13:45:46 Config A/D Result=40 13:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:46 Get A/D filter: -9.255963e+061 result=40 13:45:46 Get A/D value=-858993460 result=40 13:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:46 Aux= 13:45:46 Message to Camera, serial 144419 queued 13:46:21 Received message from Master: op=PointingHead serial=144431 13:46:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:46:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:46:22 Point started: ret=0 13:46:22 point_skyscan result=0 13:46:23 Check angles 13:46:23 SkyScan query 13:46:23 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.48<-17432 Statuses=0009 0009 13:46:23 Msec=0 True Az=109.125 Ze=-81.48 Az status=0009 Ze status=0009 13:46:23 Check angles 13:46:23 SkyScan query 13:46:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 13:46:24 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 13:46:24 Check angles 13:46:24 SkyScan query 13:46:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 13:46:25 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 13:46:25 Check angles 13:46:25 SkyScan query 13:46:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 13:46:25 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 13:46:26 Check angles 13:46:26 SkyScan query 13:46:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 13:46:26 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 13:46:26 Check angles 13:46:26 SkyScan query 13:46:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 13:46:27 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 13:46:27 Message to Master queued w/err=0: serial=144431 error=0 13:46:32 Received message from Master: op=Filter serial=144432 13:46:32 Color wheel filter change from 0 to 0 13:46:32 FLIGetFilterPos err=0 currentPosition=0 13:46:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:32 Filter is already there-color wheel unchanged 13:46:32 Received message from Master: op=Shutter serial=144433 13:46:32 Shutter LASER open 13:46:32 Received message from Camera: op=State serial=144435 13:46:32 GetSingleValue result=40 Value=cccccccc 13:46:32 SkyScan query 13:46:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:46:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:33 Parameters OK 13:46:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:33 Set A/D data flow result=40 13:46:33 Set A/D channel type result=40 13:46:33 Set A/D encoding result=40 13:46:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:33 Set channel filter=0.000000e+000 result=40 13:46:33 Config A/D Result=40 13:46:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:33 Get A/D filter: -9.255963e+061 result=40 13:46:33 Get A/D value=-858993460 result=40 13:46:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:33 Parameters OK 13:46:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:33 Set A/D data flow result=40 13:46:33 Set A/D channel type result=40 13:46:33 Set A/D encoding result=40 13:46:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:33 Set channel filter=0.000000e+000 result=40 13:46:33 Config A/D Result=40 13:46:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:33 Get A/D filter: -9.255963e+061 result=40 13:46:33 Get A/D value=-858993460 result=40 13:46:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:33 Aux= 13:46:33 Message to Camera, serial 144435 queued 13:46:41 Received message from Master: op=Shutter serial=144445 13:46:41 Shutter LASER close 13:46:42 Received message from Master: op=PointingHead serial=144449 13:46:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:46:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:46:42 Point started: ret=0 13:46:42 point_skyscan result=0 13:46:43 Check angles 13:46:43 SkyScan query 13:46:43 SkyScan query done: ret=0 az=90.045<-6003 ze=157.365<-1509 Statuses=0009 0009 13:46:43 Msec=0 True Az=90.045 Ze=157.365 Az status=0009 Ze status=0009 13:46:44 Check angles 13:46:44 SkyScan query 13:46:44 SkyScan query done: ret=0 az=72.525<-4835 ze=136.395<-2907 Statuses=0009 0009 13:46:44 Msec=750 True Az=72.525 Ze=136.395 Az status=0009 Ze status=0009 13:46:44 Check angles 13:46:44 SkyScan query 13:46:45 SkyScan query done: ret=0 az=55.095<-3673 ze=115.47<-4302 Statuses=0009 0009 13:46:45 Msec=1500 True Az=55.095 Ze=115.47 Az status=0009 Ze status=0009 13:46:45 Check angles 13:46:45 SkyScan query 13:46:46 SkyScan query done: ret=0 az=40.98<-2732 ze=93.975<-5735 Statuses=0009 0009 13:46:46 Msec=2250 True Az=40.98 Ze=93.975 Az status=0009 Ze status=0009 13:46:46 Check angles 13:46:46 SkyScan query 13:46:46 SkyScan query done: ret=0 az=40.995<-2733 ze=73.065<-7129 Statuses=0008 0009 13:46:46 Msec=3000 True Az=40.995 Ze=73.065 Az status=0008 Ze status=0009 13:46:47 Check angles 13:46:47 SkyScan query 13:46:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 13:46:47 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 13:46:47 Check angles 13:46:47 SkyScan query 13:46:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:46:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:46:48 Message to Master queued w/err=0: serial=144449 error=0 13:46:53 Received message from Master: op=Filter serial=144450 13:46:53 Color wheel filter change from 0 to 0 13:46:53 FLIGetFilterPos err=0 currentPosition=0 13:46:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:53 Filter is already there-color wheel unchanged 13:46:53 Received message from Master: op=Shutter serial=144451 13:46:53 Shutter LASER close 13:46:53 Received message from Camera: op=State serial=144453 13:46:53 GetSingleValue result=40 Value=cccccccc 13:46:53 SkyScan query 13:46:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:46:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:54 Parameters OK 13:46:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:54 Set A/D data flow result=40 13:46:54 Set A/D channel type result=40 13:46:54 Set A/D encoding result=40 13:46:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:54 Set channel filter=0.000000e+000 result=40 13:46:54 Config A/D Result=40 13:46:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:54 Get A/D filter: -9.255963e+061 result=40 13:46:54 Get A/D value=-858993460 result=40 13:46:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:54 Parameters OK 13:46:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:54 Set A/D data flow result=40 13:46:54 Set A/D channel type result=40 13:46:54 Set A/D encoding result=40 13:46:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:54 Set channel filter=0.000000e+000 result=40 13:46:54 Config A/D Result=40 13:46:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:54 Get A/D filter: -9.255963e+061 result=40 13:46:54 Get A/D value=-858993460 result=40 13:46:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:54 Aux= 13:46:54 Message to Camera, serial 144453 queued 13:47:31 Received message from Master: op=PointingHead serial=144466 13:47:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:47:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:47:31 Point started: ret=0 13:47:31 point_skyscan result=0 13:47:32 Check angles 13:47:32 SkyScan query 13:47:32 SkyScan query done: ret=0 az=63.945<-4263 ze=66.54<-7564 Statuses=0009 0008 13:47:32 Msec=0 True Az=63.945 Ze=66.54 Az status=0009 Ze status=0008 13:47:33 Check angles 13:47:33 SkyScan query 13:47:33 SkyScan query done: ret=0 az=81.42<-5428 ze=66.51<-7566 Statuses=0009 0008 13:47:33 Msec=750 True Az=81.42 Ze=66.51 Az status=0009 Ze status=0008 13:47:33 Check angles 13:47:33 SkyScan query 13:47:34 SkyScan query done: ret=0 az=98.91<-6594 ze=66.495<-7567 Statuses=0009 0008 13:47:34 Msec=1500 True Az=98.91 Ze=66.495 Az status=0009 Ze status=0008 13:47:34 Check angles 13:47:34 SkyScan query 13:47:35 SkyScan query done: ret=0 az=116.445<-7763 ze=66.495<-7567 Statuses=0009 0008 13:47:35 Msec=2250 True Az=116.445 Ze=66.495 Az status=0009 Ze status=0008 13:47:35 Check angles 13:47:35 SkyScan query 13:47:35 SkyScan query done: ret=0 az=133.95<-8930 ze=66.495<-7567 Statuses=0009 0008 13:47:35 Msec=3000 True Az=133.95 Ze=66.495 Az status=0009 Ze status=0008 13:47:36 Check angles 13:47:36 SkyScan query 13:47:36 SkyScan query done: ret=0 az=151.305<-10087 ze=66.495<-7567 Statuses=0009 0008 13:47:36 Msec=3750 True Az=151.305 Ze=66.495 Az status=0009 Ze status=0008 13:47:36 Check angles 13:47:36 SkyScan query 13:47:37 SkyScan query done: ret=0 az=158.04<-10536 ze=66.495<-7567 Statuses=0008 0008 13:47:37 Msec=4500 True Az=158.04 Ze=66.495 Az status=0008 Ze status=0008 13:47:37 Message to Master queued w/err=0: serial=144466 error=0 13:47:42 Received message from Master: op=Filter serial=144467 13:47:42 Color wheel filter change from 0 to 0 13:47:42 FLIGetFilterPos err=0 currentPosition=0 13:47:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:42 Filter is already there-color wheel unchanged 13:47:42 Received message from Master: op=Shutter serial=144468 13:47:42 Shutter LASER close 13:47:42 Received message from Camera: op=State serial=144470 13:47:42 GetSingleValue result=40 Value=cccccccc 13:47:42 SkyScan query 13:47:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:47:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:43 Parameters OK 13:47:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:43 Set A/D data flow result=40 13:47:43 Set A/D channel type result=40 13:47:43 Set A/D encoding result=40 13:47:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:43 Set channel filter=0.000000e+000 result=40 13:47:43 Config A/D Result=40 13:47:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:43 Get A/D filter: -9.255963e+061 result=40 13:47:43 Get A/D value=-858993460 result=40 13:47:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:43 Parameters OK 13:47:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:43 Set A/D data flow result=40 13:47:43 Set A/D channel type result=40 13:47:43 Set A/D encoding result=40 13:47:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:43 Set channel filter=0.000000e+000 result=40 13:47:43 Config A/D Result=40 13:47:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:43 Get A/D filter: -9.255963e+061 result=40 13:47:43 Get A/D value=-858993460 result=40 13:47:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:43 Aux= 13:47:43 Message to Camera, serial 144470 queued 13:48:20 Received message from Master: op=PointingHead serial=144483 13:48:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:48:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:48:20 Point started: ret=0 13:48:20 point_skyscan result=0 13:48:21 Check angles 13:48:21 SkyScan query 13:48:21 SkyScan query done: ret=0 az=135.09<-9006 ze=36.795<-9547 Statuses=0009 0009 13:48:21 Msec=0 True Az=135.09 Ze=36.795 Az status=0009 Ze status=0009 13:48:21 Check angles 13:48:21 SkyScan query 13:48:22 SkyScan query done: ret=0 az=117.135<-7809 ze=15.465<-10969 Statuses=0009 0009 13:48:22 Msec=750 True Az=117.135 Ze=15.465 Az status=0009 Ze status=0009 13:48:22 Check angles 13:48:22 SkyScan query 13:48:23 SkyScan query done: ret=0 az=99.75<-6650 ze=-5.58<-12372 Statuses=0009 0009 13:48:23 Msec=1500 True Az=99.75 Ze=-5.58 Az status=0009 Ze status=0009 13:48:23 Check angles 13:48:23 SkyScan query 13:48:23 SkyScan query done: ret=0 az=82.29<-5486 ze=-26.535<-13769 Statuses=0009 0009 13:48:23 Msec=2250 True Az=82.29 Ze=-26.535 Az status=0009 Ze status=0009 13:48:24 Check angles 13:48:24 SkyScan query 13:48:24 SkyScan query done: ret=0 az=64.5<-4300 ze=-38.58<-14572 Statuses=0009 0008 13:48:24 Msec=3000 True Az=64.5 Ze=-38.58 Az status=0009 Ze status=0008 13:48:24 Check angles 13:48:24 SkyScan query 13:48:25 SkyScan query done: ret=0 az=46.62<-3108 ze=-38.52<-14568 Statuses=0009 0008 13:48:25 Msec=3750 True Az=46.62 Ze=-38.52 Az status=0009 Ze status=0008 13:48:25 Check angles 13:48:25 SkyScan query 13:48:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:48:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:48:26 Message to Master queued w/err=0: serial=144483 error=0 13:48:31 Received message from Master: op=Filter serial=144484 13:48:31 Color wheel filter change from 0 to 0 13:48:31 FLIGetFilterPos err=0 currentPosition=0 13:48:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:31 Filter is already there-color wheel unchanged 13:48:31 Received message from Master: op=Shutter serial=144485 13:48:31 Shutter LASER close 13:48:31 Received message from Camera: op=State serial=144487 13:48:31 GetSingleValue result=40 Value=cccccccc 13:48:31 SkyScan query 13:48:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:48:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:32 Parameters OK 13:48:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:32 Set A/D data flow result=40 13:48:32 Set A/D channel type result=40 13:48:32 Set A/D encoding result=40 13:48:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:32 Set channel filter=0.000000e+000 result=40 13:48:32 Config A/D Result=40 13:48:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:32 Get A/D filter: -9.255963e+061 result=40 13:48:32 Get A/D value=-858993460 result=40 13:48:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:32 Parameters OK 13:48:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:32 Set A/D data flow result=40 13:48:32 Set A/D channel type result=40 13:48:32 Set A/D encoding result=40 13:48:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:32 Set channel filter=0.000000e+000 result=40 13:48:32 Config A/D Result=40 13:48:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:32 Get A/D filter: -9.255963e+061 result=40 13:48:32 Get A/D value=-858993460 result=40 13:48:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:32 Aux= 13:48:32 Message to Camera, serial 144487 queued 13:49:08 Received message from Master: op=PointingHead serial=144500 13:49:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:49:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:49:09 Point started: ret=0 13:49:09 point_skyscan result=0 13:49:09 Check angles 13:49:09 SkyScan query 13:49:10 SkyScan query done: ret=0 az=64.335<-4289 ze=-68.685<-16579 Statuses=0009 0009 13:49:10 Msec=0 True Az=64.335 Ze=-68.685 Az status=0009 Ze status=0009 13:49:10 Check angles 13:49:10 SkyScan query 13:49:11 SkyScan query done: ret=0 az=81.825<-5455 ze=-89.625<-17975 Statuses=0009 0009 13:49:11 Msec=750 True Az=81.825 Ze=-89.625 Az status=0009 Ze status=0009 13:49:11 Check angles 13:49:11 SkyScan query 13:49:12 SkyScan query done: ret=0 az=99.255<-6617 ze=-110.595<-19373 Statuses=0009 0009 13:49:12 Msec=1500 True Az=99.255 Ze=-110.595 Az status=0009 Ze status=0009 13:49:12 Check angles 13:49:12 SkyScan query 13:49:12 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.475<-20765 Statuses=0009 0009 13:49:12 Msec=2250 True Az=116.745 Ze=-131.475 Az status=0009 Ze status=0009 13:49:12 Check angles 13:49:12 SkyScan query 13:49:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 13:49:13 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 13:49:13 Check angles 13:49:13 SkyScan query 13:49:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 13:49:14 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 13:49:14 Message to Master queued w/err=0: serial=144500 error=0 13:49:19 Received message from Master: op=Filter serial=144501 13:49:19 Color wheel filter change from 0 to 0 13:49:19 FLIGetFilterPos err=0 currentPosition=0 13:49:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:19 Filter is already there-color wheel unchanged 13:49:19 Received message from Master: op=Shutter serial=144502 13:49:19 Shutter LASER close 13:49:19 Received message from Camera: op=State serial=144504 13:49:19 GetSingleValue result=40 Value=cccccccc 13:49:19 SkyScan query 13:49:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:49:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:20 Parameters OK 13:49:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:20 Set A/D data flow result=40 13:49:20 Set A/D channel type result=40 13:49:20 Set A/D encoding result=40 13:49:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:20 Set channel filter=0.000000e+000 result=40 13:49:20 Config A/D Result=40 13:49:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:20 Get A/D filter: -9.255963e+061 result=40 13:49:20 Get A/D value=-858993460 result=40 13:49:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:20 Parameters OK 13:49:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:20 Set A/D data flow result=40 13:49:20 Set A/D channel type result=40 13:49:20 Set A/D encoding result=40 13:49:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:20 Set channel filter=0.000000e+000 result=40 13:49:20 Config A/D Result=40 13:49:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:20 Get A/D filter: -9.255963e+061 result=40 13:49:20 Get A/D value=-858993460 result=40 13:49:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:20 Aux= 13:49:20 Message to Camera, serial 144504 queued 13:49:56 Received message from Master: op=PointingHead serial=144517 13:49:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:49:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:49:57 Point started: ret=0 13:49:57 point_skyscan result=0 13:49:58 Check angles 13:49:58 SkyScan query 13:49:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 13:49:58 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 13:49:58 Check angles 13:49:58 SkyScan query 13:49:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:49:59 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:49:59 Message to Master queued w/err=0: serial=144517 error=0 13:50:04 Received message from Master: op=Filter serial=144518 13:50:04 Color wheel filter change from 0 to 0 13:50:04 FLIGetFilterPos err=0 currentPosition=0 13:50:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:04 Filter is already there-color wheel unchanged 13:50:04 Received message from Master: op=Shutter serial=144519 13:50:04 Shutter LASER open 13:50:04 Received message from Camera: op=State serial=144521 13:50:04 GetSingleValue result=40 Value=cccccccc 13:50:04 SkyScan query 13:50:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:50:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:05 Parameters OK 13:50:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:05 Set A/D data flow result=40 13:50:05 Set A/D channel type result=40 13:50:05 Set A/D encoding result=40 13:50:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:05 Set channel filter=0.000000e+000 result=40 13:50:05 Config A/D Result=40 13:50:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:05 Get A/D filter: -9.255963e+061 result=40 13:50:05 Get A/D value=-858993460 result=40 13:50:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:05 Parameters OK 13:50:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:05 Set A/D data flow result=40 13:50:05 Set A/D channel type result=40 13:50:05 Set A/D encoding result=40 13:50:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:05 Set channel filter=0.000000e+000 result=40 13:50:05 Config A/D Result=40 13:50:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:05 Get A/D filter: -9.255963e+061 result=40 13:50:05 Get A/D value=-858993460 result=40 13:50:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:05 Aux= 13:50:05 Message to Camera, serial 144521 queued 13:50:13 Received message from Master: op=Shutter serial=144531 13:50:13 Shutter LASER close 13:50:14 Received message from Master: op=PointingHead serial=144535 13:50:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:50:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:50:14 Point started: ret=0 13:50:14 point_skyscan result=0 13:50:15 Check angles 13:50:15 SkyScan query 13:50:16 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.31<-21554 Statuses=0009 0009 13:50:16 Msec=0 True Az=135.885 Ze=-143.31 Az status=0009 Ze status=0009 13:50:16 Check angles 13:50:16 SkyScan query 13:50:16 SkyScan query done: ret=0 az=153.795<-10253 ze=-121.89<-20126 Statuses=0009 0009 13:50:16 Msec=750 True Az=153.795 Ze=-121.89 Az status=0009 Ze status=0009 13:50:16 Check angles 13:50:16 SkyScan query 13:50:17 SkyScan query done: ret=0 az=171.3<-11420 ze=-100.875<-18725 Statuses=0009 0009 13:50:17 Msec=1500 True Az=171.3 Ze=-100.875 Az status=0009 Ze status=0009 13:50:17 Check angles 13:50:17 SkyScan query 13:50:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.515<-17301 Statuses=0008 0009 13:50:18 Msec=2250 True Az=176.01 Ze=-79.515 Az status=0008 Ze status=0009 13:50:18 Check angles 13:50:18 SkyScan query 13:50:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.545<-15903 Statuses=0008 0009 13:50:19 Msec=3000 True Az=176.01 Ze=-58.545 Az status=0008 Ze status=0009 13:50:19 Check angles 13:50:19 SkyScan query 13:50:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:50:19 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:50:19 Message to Master queued w/err=0: serial=144535 error=0 13:50:24 Received message from Master: op=Filter serial=144536 13:50:24 Color wheel filter change from 0 to 0 13:50:24 FLIGetFilterPos err=0 currentPosition=0 13:50:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:24 Filter is already there-color wheel unchanged 13:50:24 Received message from Master: op=Shutter serial=144537 13:50:24 Shutter LASER close 13:50:25 Received message from Camera: op=State serial=144539 13:50:25 GetSingleValue result=40 Value=cccccccc 13:50:25 SkyScan query 13:50:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:50:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:25 Parameters OK 13:50:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:25 Set A/D data flow result=40 13:50:25 Set A/D channel type result=40 13:50:25 Set A/D encoding result=40 13:50:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:25 Set channel filter=0.000000e+000 result=40 13:50:25 Config A/D Result=40 13:50:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:25 Get A/D filter: -9.255963e+061 result=40 13:50:25 Get A/D value=-858993460 result=40 13:50:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:25 Parameters OK 13:50:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:25 Set A/D data flow result=40 13:50:25 Set A/D channel type result=40 13:50:25 Set A/D encoding result=40 13:50:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:25 Set channel filter=0.000000e+000 result=40 13:50:25 Config A/D Result=40 13:50:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:25 Get A/D filter: -9.255963e+061 result=40 13:50:25 Get A/D value=-858993460 result=40 13:50:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:25 Aux= 13:50:25 Message to Camera, serial 144539 queued 13:51:02 Received message from Master: op=PointingHead serial=144552 13:51:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:51:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:51:02 Point started: ret=0 13:51:02 point_skyscan result=0 13:51:03 Check angles 13:51:03 SkyScan query 13:51:04 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.39<-13426 Statuses=0009 0009 13:51:04 Msec=0 True Az=152.73 Ze=-21.39 Az status=0009 Ze status=0009 13:51:04 Check angles 13:51:04 SkyScan query 13:51:05 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.45<-12030 Statuses=0009 0009 13:51:05 Msec=750 True Az=135.135 Ze=-0.45 Az status=0009 Ze status=0009 13:51:05 Check angles 13:51:05 SkyScan query 13:51:05 SkyScan query done: ret=0 az=117.75<-7850 ze=20.52<-10632 Statuses=0009 0009 13:51:05 Msec=1500 True Az=117.75 Ze=20.52 Az status=0009 Ze status=0009 13:51:06 Check angles 13:51:06 SkyScan query 13:51:06 SkyScan query done: ret=0 az=100.005<-6667 ze=41.895<-9207 Statuses=0009 0009 13:51:06 Msec=2250 True Az=100.005 Ze=41.895 Az status=0009 Ze status=0009 13:51:06 Check angles 13:51:06 SkyScan query 13:51:07 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:51:07 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:51:07 Check angles 13:51:07 SkyScan query 13:51:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:51:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:51:08 Message to Master queued w/err=0: serial=144552 error=0 13:51:13 Received message from Master: op=Filter serial=144553 13:51:13 Color wheel filter change from 0 to 0 13:51:13 FLIGetFilterPos err=0 currentPosition=0 13:51:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:13 Filter is already there-color wheel unchanged 13:51:13 Received message from Master: op=Shutter serial=144554 13:51:13 Shutter LASER close 13:51:13 Received message from Camera: op=State serial=144556 13:51:13 GetSingleValue result=40 Value=cccccccc 13:51:13 SkyScan query 13:51:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:51:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:13 Parameters OK 13:51:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:13 Set A/D data flow result=40 13:51:13 Set A/D channel type result=40 13:51:13 Set A/D encoding result=40 13:51:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:13 Set channel filter=0.000000e+000 result=40 13:51:13 Config A/D Result=40 13:51:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:13 Get A/D filter: -9.255963e+061 result=40 13:51:13 Get A/D value=-858993460 result=40 13:51:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:13 Parameters OK 13:51:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:13 Set A/D data flow result=40 13:51:13 Set A/D channel type result=40 13:51:13 Set A/D encoding result=40 13:51:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:13 Set channel filter=0.000000e+000 result=40 13:51:13 Config A/D Result=40 13:51:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:13 Get A/D filter: -9.255963e+061 result=40 13:51:13 Get A/D value=-858993460 result=40 13:51:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:13 Aux= 13:51:13 Message to Camera, serial 144556 queued 13:51:50 Received message from Master: op=PointingHead serial=144569 13:51:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:51:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:51:51 Point started: ret=0 13:51:51 point_skyscan result=0 13:51:51 Check angles 13:51:51 SkyScan query 13:51:52 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 13:51:52 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 13:51:52 Check angles 13:51:52 SkyScan query 13:51:53 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 13:51:53 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 13:51:53 Check angles 13:51:53 SkyScan query 13:51:53 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 13:51:53 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 13:51:54 Check angles 13:51:54 SkyScan query 13:51:54 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 13:51:54 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 13:51:54 Check angles 13:51:54 SkyScan query 13:51:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:51:55 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:51:55 Check angles 13:51:55 SkyScan query 13:51:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:51:56 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:51:56 Message to Master queued w/err=0: serial=144569 error=0 13:52:01 Received message from Master: op=Filter serial=144570 13:52:01 Color wheel filter change from 0 to 0 13:52:01 FLIGetFilterPos err=0 currentPosition=0 13:52:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:01 Filter is already there-color wheel unchanged 13:52:01 Received message from Master: op=Shutter serial=144571 13:52:01 Shutter LASER close 13:52:01 Received message from Camera: op=State serial=144573 13:52:01 GetSingleValue result=40 Value=cccccccc 13:52:01 SkyScan query 13:52:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:52:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:01 Parameters OK 13:52:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:01 Set A/D data flow result=40 13:52:01 Set A/D channel type result=40 13:52:01 Set A/D encoding result=40 13:52:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:01 Set channel filter=0.000000e+000 result=40 13:52:01 Config A/D Result=40 13:52:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:01 Get A/D filter: -9.255963e+061 result=40 13:52:01 Get A/D value=-858993460 result=40 13:52:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:01 Parameters OK 13:52:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:01 Set A/D data flow result=40 13:52:01 Set A/D channel type result=40 13:52:01 Set A/D encoding result=40 13:52:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:01 Set channel filter=0.000000e+000 result=40 13:52:01 Config A/D Result=40 13:52:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:01 Get A/D filter: -9.255963e+061 result=40 13:52:01 Get A/D value=-858993460 result=40 13:52:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:01 Aux= 13:52:01 Message to Camera, serial 144573 queued 13:52:38 Received message from Master: op=PointingHead serial=144586 13:52:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:52:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:52:39 Point started: ret=0 13:52:39 point_skyscan result=0 13:52:39 Check angles 13:52:39 SkyScan query 13:52:40 SkyScan query done: ret=0 az=152.76<-10184 ze=8.385<-11441 Statuses=0009 0009 13:52:40 Msec=0 True Az=152.76 Ze=8.385 Az status=0009 Ze status=0009 13:52:40 Check angles 13:52:40 SkyScan query 13:52:41 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.495<-12833 Statuses=0009 0009 13:52:41 Msec=750 True Az=135.315 Ze=-12.495 Az status=0009 Ze status=0009 13:52:41 Check angles 13:52:41 SkyScan query 13:52:41 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.51<-14234 Statuses=0009 0009 13:52:41 Msec=1500 True Az=117.81 Ze=-33.51 Az status=0009 Ze status=0009 13:52:42 Check angles 13:52:42 SkyScan query 13:52:42 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.57<-15438 Statuses=0009 0009 13:52:42 Msec=2250 True Az=100.05 Ze=-51.57 Az status=0009 Ze status=0009 13:52:42 Check angles 13:52:42 SkyScan query 13:52:43 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 13:52:43 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 13:52:43 Check angles 13:52:43 SkyScan query 13:52:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:52:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:52:44 Message to Master queued w/err=0: serial=144586 error=0 13:52:49 Received message from Master: op=Filter serial=144587 13:52:49 Color wheel filter change from 0 to 0 13:52:49 FLIGetFilterPos err=0 currentPosition=0 13:52:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:49 Filter is already there-color wheel unchanged 13:52:49 Received message from Master: op=Shutter serial=144588 13:52:49 Shutter LASER close 13:52:49 Received message from Camera: op=State serial=144590 13:52:49 GetSingleValue result=40 Value=cccccccc 13:52:49 SkyScan query 13:52:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:52:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:50 Parameters OK 13:52:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:50 Set A/D data flow result=40 13:52:50 Set A/D channel type result=40 13:52:50 Set A/D encoding result=40 13:52:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:50 Set channel filter=0.000000e+000 result=40 13:52:50 Config A/D Result=40 13:52:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:50 Get A/D filter: -9.255963e+061 result=40 13:52:50 Get A/D value=-858993460 result=40 13:52:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:50 Parameters OK 13:52:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:50 Set A/D data flow result=40 13:52:50 Set A/D channel type result=40 13:52:50 Set A/D encoding result=40 13:52:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:50 Set channel filter=0.000000e+000 result=40 13:52:50 Config A/D Result=40 13:52:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:50 Get A/D filter: -9.255963e+061 result=40 13:52:50 Get A/D value=-858993460 result=40 13:52:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:50 Aux= 13:52:50 Message to Camera, serial 144590 queued 13:53:26 Received message from Master: op=PointingHead serial=144603 13:53:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:53:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:53:27 Point started: ret=0 13:53:27 point_skyscan result=0 13:53:28 Check angles 13:53:28 SkyScan query 13:53:28 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.555<-17437 Statuses=0009 0009 13:53:28 Msec=0 True Az=109.17 Ze=-81.555 Az status=0009 Ze status=0009 13:53:28 Check angles 13:53:28 SkyScan query 13:53:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 13:53:29 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 13:53:29 Check angles 13:53:29 SkyScan query 13:53:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 13:53:30 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 13:53:30 Check angles 13:53:30 SkyScan query 13:53:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.795<-21653 Statuses=0008 0009 13:53:30 Msec=2250 True Az=112.995 Ze=-144.795 Az status=0008 Ze status=0009 13:53:31 Check angles 13:53:31 SkyScan query 13:53:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 13:53:31 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 13:53:31 Check angles 13:53:31 SkyScan query 13:53:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:53:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:53:32 Message to Master queued w/err=0: serial=144603 error=0 13:53:37 Received message from Master: op=Filter serial=144604 13:53:37 Color wheel filter change from 0 to 0 13:53:37 FLIGetFilterPos err=0 currentPosition=0 13:53:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:37 Filter is already there-color wheel unchanged 13:53:37 Received message from Master: op=Shutter serial=144605 13:53:37 Shutter LASER open 13:53:37 Received message from Camera: op=State serial=144607 13:53:37 GetSingleValue result=40 Value=cccccccc 13:53:37 SkyScan query 13:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:53:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:38 Parameters OK 13:53:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:38 Set A/D data flow result=40 13:53:38 Set A/D channel type result=40 13:53:38 Set A/D encoding result=40 13:53:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:38 Set channel filter=0.000000e+000 result=40 13:53:38 Config A/D Result=40 13:53:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:38 Get A/D filter: -9.255963e+061 result=40 13:53:38 Get A/D value=-858993460 result=40 13:53:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:38 Parameters OK 13:53:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:38 Set A/D data flow result=40 13:53:38 Set A/D channel type result=40 13:53:38 Set A/D encoding result=40 13:53:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:38 Set channel filter=0.000000e+000 result=40 13:53:38 Config A/D Result=40 13:53:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:38 Get A/D filter: -9.255963e+061 result=40 13:53:38 Get A/D value=-858993460 result=40 13:53:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:38 Aux= 13:53:38 Message to Camera, serial 144607 queued 13:53:46 Received message from Master: op=Shutter serial=144617 13:53:46 Shutter LASER close 13:53:47 Received message from Master: op=PointingHead serial=144621 13:53:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:53:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:53:47 Point started: ret=0 13:53:47 point_skyscan result=0 13:53:48 Check angles 13:53:48 SkyScan query 13:53:48 SkyScan query done: ret=0 az=90.135<-6009 ze=157.515<-1499 Statuses=0009 0009 13:53:48 Msec=0 True Az=90.135 Ze=157.515 Az status=0009 Ze status=0009 13:53:48 Check angles 13:53:48 SkyScan query 13:53:49 SkyScan query done: ret=0 az=72.72<-4848 ze=136.53<-2898 Statuses=0009 0009 13:53:49 Msec=750 True Az=72.72 Ze=136.53 Az status=0009 Ze status=0009 13:53:49 Check angles 13:53:49 SkyScan query 13:53:50 SkyScan query done: ret=0 az=55.23<-3682 ze=115.635<-4291 Statuses=0009 0009 13:53:50 Msec=1500 True Az=55.23 Ze=115.635 Az status=0009 Ze status=0009 13:53:50 Check angles 13:53:50 SkyScan query 13:53:51 SkyScan query done: ret=0 az=40.98<-2732 ze=94.185<-5721 Statuses=0009 0009 13:53:51 Msec=2250 True Az=40.98 Ze=94.185 Az status=0009 Ze status=0009 13:53:51 Check angles 13:53:51 SkyScan query 13:53:51 SkyScan query done: ret=0 az=40.995<-2733 ze=73.215<-7119 Statuses=0008 0009 13:53:51 Msec=3000 True Az=40.995 Ze=73.215 Az status=0008 Ze status=0009 13:53:52 Check angles 13:53:52 SkyScan query 13:53:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.74<-8484 Statuses=0008 0009 13:53:52 Msec=3750 True Az=40.995 Ze=52.74 Az status=0008 Ze status=0009 13:53:52 Check angles 13:53:52 SkyScan query 13:53:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:53:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:53:53 Message to Master queued w/err=0: serial=144621 error=0 13:53:58 Received message from Master: op=Filter serial=144622 13:53:58 Color wheel filter change from 0 to 0 13:53:58 FLIGetFilterPos err=0 currentPosition=0 13:53:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:58 Filter is already there-color wheel unchanged 13:53:58 Received message from Master: op=Shutter serial=144623 13:53:58 Shutter LASER close 13:53:58 Received message from Camera: op=State serial=144625 13:53:58 GetSingleValue result=40 Value=cccccccc 13:53:58 SkyScan query 13:53:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:53:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:59 Parameters OK 13:53:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:59 Set A/D data flow result=40 13:53:59 Set A/D channel type result=40 13:53:59 Set A/D encoding result=40 13:53:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:59 Set channel filter=0.000000e+000 result=40 13:53:59 Config A/D Result=40 13:53:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:59 Get A/D filter: -9.255963e+061 result=40 13:53:59 Get A/D value=-858993460 result=40 13:53:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:59 Parameters OK 13:53:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:59 Set A/D data flow result=40 13:53:59 Set A/D channel type result=40 13:53:59 Set A/D encoding result=40 13:53:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:59 Set channel filter=0.000000e+000 result=40 13:53:59 Config A/D Result=40 13:53:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:59 Get A/D filter: -9.255963e+061 result=40 13:53:59 Get A/D value=-858993460 result=40 13:53:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:59 Aux= 13:53:59 Message to Camera, serial 144625 queued 13:54:36 Received message from Master: op=PointingHead serial=144638 13:54:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:54:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:54:36 Point started: ret=0 13:54:36 point_skyscan result=0 13:54:37 Check angles 13:54:37 SkyScan query 13:54:37 SkyScan query done: ret=0 az=64.2<-4280 ze=66.57<-7562 Statuses=0009 0008 13:54:37 Msec=0 True Az=64.2 Ze=66.57 Az status=0009 Ze status=0008 13:54:37 Check angles 13:54:37 SkyScan query 13:54:38 SkyScan query done: ret=0 az=81.78<-5452 ze=66.495<-7567 Statuses=0009 0008 13:54:38 Msec=750 True Az=81.78 Ze=66.495 Az status=0009 Ze status=0008 13:54:38 Check angles 13:54:38 SkyScan query 13:54:39 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 13:54:39 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 13:54:39 Check angles 13:54:39 SkyScan query 13:54:40 SkyScan query done: ret=0 az=116.67<-7778 ze=66.495<-7567 Statuses=0009 0008 13:54:40 Msec=2250 True Az=116.67 Ze=66.495 Az status=0009 Ze status=0008 13:54:40 Check angles 13:54:40 SkyScan query 13:54:40 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 13:54:40 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 13:54:40 Check angles 13:54:40 SkyScan query 13:54:41 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 13:54:41 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 13:54:41 Check angles 13:54:41 SkyScan query 13:54:42 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 13:54:42 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 13:54:42 Message to Master queued w/err=0: serial=144638 error=0 13:54:47 Received message from Master: op=Filter serial=144639 13:54:47 Color wheel filter change from 0 to 0 13:54:47 FLIGetFilterPos err=0 currentPosition=0 13:54:47 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:47 Filter is already there-color wheel unchanged 13:54:47 Received message from Master: op=Shutter serial=144640 13:54:47 Shutter LASER close 13:54:47 Received message from Camera: op=State serial=144642 13:54:47 GetSingleValue result=40 Value=cccccccc 13:54:47 SkyScan query 13:54:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:54:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:48 Parameters OK 13:54:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:48 Set A/D data flow result=40 13:54:48 Set A/D channel type result=40 13:54:48 Set A/D encoding result=40 13:54:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:48 Set channel filter=0.000000e+000 result=40 13:54:48 Config A/D Result=40 13:54:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:48 Get A/D filter: -9.255963e+061 result=40 13:54:48 Get A/D value=-858993460 result=40 13:54:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:48 Parameters OK 13:54:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:48 Set A/D data flow result=40 13:54:48 Set A/D channel type result=40 13:54:48 Set A/D encoding result=40 13:54:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:48 Set channel filter=0.000000e+000 result=40 13:54:48 Config A/D Result=40 13:54:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:48 Get A/D filter: -9.255963e+061 result=40 13:54:48 Get A/D value=-858993460 result=40 13:54:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:48 Aux= 13:54:48 Message to Camera, serial 144642 queued 13:55:24 Received message from Master: op=PointingHead serial=144655 13:55:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:55:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:55:25 Point started: ret=0 13:55:25 point_skyscan result=0 13:55:26 Check angles 13:55:26 SkyScan query 13:55:26 SkyScan query done: ret=0 az=135.195<-9013 ze=36.87<-9542 Statuses=0009 0009 13:55:26 Msec=0 True Az=135.195 Ze=36.87 Az status=0009 Ze status=0009 13:55:26 Check angles 13:55:26 SkyScan query 13:55:27 SkyScan query done: ret=0 az=117.27<-7818 ze=15.57<-10962 Statuses=0009 0009 13:55:27 Msec=750 True Az=117.27 Ze=15.57 Az status=0009 Ze status=0009 13:55:27 Check angles 13:55:27 SkyScan query 13:55:28 SkyScan query done: ret=0 az=99.87<-6658 ze=-5.46<-12364 Statuses=0009 0009 13:55:28 Msec=1500 True Az=99.87 Ze=-5.46 Az status=0009 Ze status=0009 13:55:28 Check angles 13:55:28 SkyScan query 13:55:28 SkyScan query done: ret=0 az=82.35<-5490 ze=-26.445<-13763 Statuses=0009 0009 13:55:28 Msec=2250 True Az=82.35 Ze=-26.445 Az status=0009 Ze status=0009 13:55:29 Check angles 13:55:29 SkyScan query 13:55:29 SkyScan query done: ret=0 az=64.56<-4304 ze=-38.595<-14573 Statuses=0009 0008 13:55:29 Msec=3000 True Az=64.56 Ze=-38.595 Az status=0009 Ze status=0008 13:55:29 Check angles 13:55:29 SkyScan query [UTC 2018-12-14 13:55:30] 13:55:30 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.52<-14568 Statuses=0009 0008 13:55:30 Msec=3750 True Az=47.13 Ze=-38.52 Az status=0009 Ze status=0008 13:55:30 Check angles 13:55:30 SkyScan query 13:55:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:55:31 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:55:31 Message to Master queued w/err=0: serial=144655 error=0 13:55:36 Received message from Master: op=Filter serial=144656 13:55:36 Color wheel filter change from 0 to 0 13:55:36 FLIGetFilterPos err=0 currentPosition=0 13:55:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:36 Filter is already there-color wheel unchanged 13:55:36 Received message from Master: op=Shutter serial=144657 13:55:36 Shutter LASER close 13:55:36 Received message from Camera: op=State serial=144659 13:55:36 GetSingleValue result=40 Value=cccccccc 13:55:36 SkyScan query 13:55:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:55:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:36 Parameters OK 13:55:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:36 Set A/D data flow result=40 13:55:36 Set A/D channel type result=40 13:55:36 Set A/D encoding result=40 13:55:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:36 Set channel filter=0.000000e+000 result=40 13:55:36 Config A/D Result=40 13:55:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:36 Get A/D filter: -9.255963e+061 result=40 13:55:36 Get A/D value=-858993460 result=40 13:55:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:36 Parameters OK 13:55:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:36 Set A/D data flow result=40 13:55:36 Set A/D channel type result=40 13:55:36 Set A/D encoding result=40 13:55:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:36 Set channel filter=0.000000e+000 result=40 13:55:36 Config A/D Result=40 13:55:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:36 Get A/D filter: -9.255963e+061 result=40 13:55:36 Get A/D value=-858993460 result=40 13:55:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:36 Aux= 13:55:36 Message to Camera, serial 144659 queued [UTC 2018-12-14 13:55:52] 13:56:12 Received message from Master: op=PointingHead serial=144671 13:56:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:56:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:56:13 Point started: ret=0 13:56:13 point_skyscan result=0 13:56:13 Check angles 13:56:13 SkyScan query 13:56:14 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.085<-16539 Statuses=0009 0009 13:56:14 Msec=0 True Az=63.915 Ze=-68.085 Az status=0009 Ze status=0009 13:56:14 Check angles 13:56:14 SkyScan query 13:56:15 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.1<-17940 Statuses=0009 0009 13:56:15 Msec=750 True Az=81.345 Ze=-89.1 Az status=0009 Ze status=0009 13:56:15 Check angles 13:56:15 SkyScan query 13:56:16 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.475<-19365 Statuses=0009 0009 13:56:16 Msec=1500 True Az=99.195 Ze=-110.475 Az status=0009 Ze status=0009 13:56:16 Check angles 13:56:16 SkyScan query 13:56:16 SkyScan query done: ret=0 az=116.685<-7779 ze=-131.385<-20759 Statuses=0009 0009 13:56:16 Msec=2250 True Az=116.685 Ze=-131.385 Az status=0009 Ze status=0009 13:56:16 Check angles 13:56:16 SkyScan query 13:56:17 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 13:56:17 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 13:56:17 Check angles 13:56:17 SkyScan query 13:56:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 13:56:18 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 13:56:18 Message to Master queued w/err=0: serial=144671 error=0 13:56:23 Received message from Master: op=Filter serial=144672 13:56:23 Color wheel filter change from 0 to 0 13:56:23 FLIGetFilterPos err=0 currentPosition=0 13:56:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:23 Filter is already there-color wheel unchanged 13:56:23 Received message from Master: op=Shutter serial=144673 13:56:23 Shutter LASER close 13:56:23 Received message from Camera: op=State serial=144675 13:56:23 GetSingleValue result=40 Value=cccccccc 13:56:23 SkyScan query 13:56:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:56:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:24 Parameters OK 13:56:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:24 Set A/D data flow result=40 13:56:24 Set A/D channel type result=40 13:56:24 Set A/D encoding result=40 13:56:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:24 Set channel filter=0.000000e+000 result=40 13:56:24 Config A/D Result=40 13:56:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:24 Get A/D filter: -9.255963e+061 result=40 13:56:24 Get A/D value=-858993460 result=40 13:56:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:24 Parameters OK 13:56:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:24 Set A/D data flow result=40 13:56:24 Set A/D channel type result=40 13:56:24 Set A/D encoding result=40 13:56:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:24 Set channel filter=0.000000e+000 result=40 13:56:24 Config A/D Result=40 13:56:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:24 Get A/D filter: -9.255963e+061 result=40 13:56:24 Get A/D value=-858993460 result=40 13:56:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:24 Aux= 13:56:24 Message to Camera, serial 144675 queued 13:57:00 Received message from Master: op=PointingHead serial=144688 13:57:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:57:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:57:01 Point started: ret=0 13:57:01 point_skyscan result=0 13:57:01 Check angles 13:57:01 SkyScan query 13:57:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 13:57:02 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 13:57:02 Check angles 13:57:02 SkyScan query 13:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:57:03 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:57:03 Message to Master queued w/err=0: serial=144688 error=0 13:57:08 Received message from Master: op=Filter serial=144689 13:57:08 Color wheel filter change from 0 to 0 13:57:08 FLIGetFilterPos err=0 currentPosition=0 13:57:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:08 Filter is already there-color wheel unchanged 13:57:08 Received message from Master: op=Shutter serial=144690 13:57:08 Shutter LASER open 13:57:08 Received message from Camera: op=State serial=144692 13:57:08 GetSingleValue result=40 Value=cccccccc 13:57:08 SkyScan query 13:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:57:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:09 Parameters OK 13:57:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:09 Set A/D data flow result=40 13:57:09 Set A/D channel type result=40 13:57:09 Set A/D encoding result=40 13:57:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:09 Set channel filter=0.000000e+000 result=40 13:57:09 Config A/D Result=40 13:57:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:09 Get A/D filter: -9.255963e+061 result=40 13:57:09 Get A/D value=-858993460 result=40 13:57:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:09 Parameters OK 13:57:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:09 Set A/D data flow result=40 13:57:09 Set A/D channel type result=40 13:57:09 Set A/D encoding result=40 13:57:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:09 Set channel filter=0.000000e+000 result=40 13:57:09 Config A/D Result=40 13:57:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:09 Get A/D filter: -9.255963e+061 result=40 13:57:09 Get A/D value=-858993460 result=40 13:57:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:09 Aux= 13:57:09 Message to Camera, serial 144692 queued 13:57:17 Received message from Master: op=Shutter serial=144702 13:57:17 Shutter LASER close 13:57:18 Received message from Master: op=PointingHead serial=144706 13:57:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:57:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:57:18 Point started: ret=0 13:57:18 point_skyscan result=0 13:57:19 Check angles 13:57:19 SkyScan query 13:57:19 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.83<-21522 Statuses=0009 0009 13:57:19 Msec=0 True Az=136.365 Ze=-142.83 Az status=0009 Ze status=0009 13:57:20 Check angles 13:57:20 SkyScan query 13:57:20 SkyScan query done: ret=0 az=153.855<-10257 ze=-121.845<-20123 Statuses=0009 0009 13:57:20 Msec=750 True Az=153.855 Ze=-121.845 Az status=0009 Ze status=0009 13:57:20 Check angles 13:57:20 SkyScan query 13:57:21 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.815<-18721 Statuses=0009 0009 13:57:21 Msec=1500 True Az=171.435 Ze=-100.815 Az status=0009 Ze status=0009 13:57:21 Check angles 13:57:21 SkyScan query 13:57:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.44<-17296 Statuses=0008 0009 13:57:22 Msec=2250 True Az=176.01 Ze=-79.44 Az status=0008 Ze status=0009 13:57:22 Check angles 13:57:22 SkyScan query 13:57:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.08<-15872 Statuses=0008 0009 13:57:22 Msec=3000 True Az=176.01 Ze=-58.08 Az status=0008 Ze status=0009 13:57:23 Check angles 13:57:23 SkyScan query 13:57:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:57:23 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:57:23 Message to Master queued w/err=0: serial=144706 error=0 13:57:28 Received message from Master: op=Filter serial=144707 13:57:28 Color wheel filter change from 0 to 0 13:57:28 FLIGetFilterPos err=0 currentPosition=0 13:57:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:28 Filter is already there-color wheel unchanged 13:57:28 Received message from Master: op=Shutter serial=144708 13:57:28 Shutter LASER close 13:57:29 Received message from Camera: op=State serial=144710 13:57:29 GetSingleValue result=40 Value=cccccccc 13:57:29 SkyScan query 13:57:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:57:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:29 Parameters OK 13:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:29 Set A/D data flow result=40 13:57:29 Set A/D channel type result=40 13:57:29 Set A/D encoding result=40 13:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:29 Set channel filter=0.000000e+000 result=40 13:57:29 Config A/D Result=40 13:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:29 Get A/D filter: -9.255963e+061 result=40 13:57:29 Get A/D value=-858993460 result=40 13:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:29 Parameters OK 13:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:29 Set A/D data flow result=40 13:57:29 Set A/D channel type result=40 13:57:29 Set A/D encoding result=40 13:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:29 Set channel filter=0.000000e+000 result=40 13:57:29 Config A/D Result=40 13:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:29 Get A/D filter: -9.255963e+061 result=40 13:57:29 Get A/D value=-858993460 result=40 13:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:29 Aux= 13:57:29 Message to Camera, serial 144710 queued 13:58:06 Received message from Master: op=PointingHead serial=144723 13:58:06 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:58:06 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:58:06 Point started: ret=0 13:58:06 point_skyscan result=0 13:58:07 Check angles 13:58:07 SkyScan query 13:58:08 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.035<-13469 Statuses=0009 0009 13:58:08 Msec=0 True Az=153.21 Ze=-22.035 Az status=0009 Ze status=0009 13:58:08 Check angles 13:58:08 SkyScan query 13:58:08 SkyScan query done: ret=0 az=135.81<-9054 ze=-1.035<-12069 Statuses=0009 0009 13:58:08 Msec=750 True Az=135.81 Ze=-1.035 Az status=0009 Ze status=0009 13:58:09 Check angles 13:58:09 SkyScan query 13:58:09 SkyScan query done: ret=0 az=118.2<-7880 ze=19.89<-10674 Statuses=0009 0009 13:58:09 Msec=1500 True Az=118.2 Ze=19.89 Az status=0009 Ze status=0009 13:58:09 Check angles 13:58:09 SkyScan query 13:58:10 SkyScan query done: ret=0 az=100.815<-6721 ze=40.89<-9274 Statuses=0009 0009 13:58:10 Msec=2250 True Az=100.815 Ze=40.89 Az status=0009 Ze status=0009 13:58:10 Check angles 13:58:10 SkyScan query 13:58:11 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 13:58:11 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 13:58:11 Check angles 13:58:11 SkyScan query 13:58:11 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 13:58:11 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 13:58:11 Message to Master queued w/err=0: serial=144723 error=0 13:58:16 Received message from Master: op=Filter serial=144724 13:58:16 Color wheel filter change from 0 to 0 13:58:16 FLIGetFilterPos err=0 currentPosition=0 13:58:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:16 Filter is already there-color wheel unchanged 13:58:17 Received message from Master: op=Shutter serial=144725 13:58:17 Shutter LASER close 13:58:17 Received message from Camera: op=State serial=144727 13:58:17 GetSingleValue result=40 Value=cccccccc 13:58:17 SkyScan query 13:58:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:58:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:17 Parameters OK 13:58:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:17 Set A/D data flow result=40 13:58:17 Set A/D channel type result=40 13:58:17 Set A/D encoding result=40 13:58:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:17 Set channel filter=0.000000e+000 result=40 13:58:17 Config A/D Result=40 13:58:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:17 Get A/D filter: -9.255963e+061 result=40 13:58:17 Get A/D value=-858993460 result=40 13:58:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:17 Parameters OK 13:58:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:17 Set A/D data flow result=40 13:58:17 Set A/D channel type result=40 13:58:17 Set A/D encoding result=40 13:58:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:17 Set channel filter=0.000000e+000 result=40 13:58:17 Config A/D Result=40 13:58:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:17 Get A/D filter: -9.255963e+061 result=40 13:58:17 Get A/D value=-858993460 result=40 13:58:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:17 Aux= 13:58:17 Message to Camera, serial 144727 queued 13:58:54 Received message from Master: op=PointingHead serial=144740 13:58:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:58:54 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:58:54 Point started: ret=0 13:58:54 point_skyscan result=0 13:58:55 Check angles 13:58:55 SkyScan query 13:58:56 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 13:58:56 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 13:58:56 Check angles 13:58:56 SkyScan query 13:58:56 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 13:58:56 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 13:58:57 Check angles 13:58:57 SkyScan query 13:58:57 SkyScan query done: ret=0 az=144.165<-9611 ze=38.505<-9433 Statuses=0009 0008 13:58:57 Msec=1500 True Az=144.165 Ze=38.505 Az status=0009 Ze status=0008 13:58:57 Check angles 13:58:57 SkyScan query 13:58:58 SkyScan query done: ret=0 az=161.985<-10799 ze=38.505<-9433 Statuses=0009 0008 13:58:58 Msec=2250 True Az=161.985 Ze=38.505 Az status=0009 Ze status=0008 13:58:58 Check angles 13:58:58 SkyScan query 13:58:59 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 13:58:59 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 13:58:59 Check angles 13:58:59 SkyScan query 13:58:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:58:59 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 13:58:59 Message to Master queued w/err=0: serial=144740 error=0 13:59:04 Received message from Master: op=Filter serial=144741 13:59:04 Color wheel filter change from 0 to 0 13:59:04 FLIGetFilterPos err=0 currentPosition=0 13:59:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:04 Filter is already there-color wheel unchanged 13:59:05 Received message from Master: op=Shutter serial=144742 13:59:05 Shutter LASER close 13:59:05 Received message from Camera: op=State serial=144744 13:59:05 GetSingleValue result=40 Value=cccccccc 13:59:05 SkyScan query 13:59:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:59:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:05 Parameters OK 13:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:05 Set A/D data flow result=40 13:59:05 Set A/D channel type result=40 13:59:05 Set A/D encoding result=40 13:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:05 Set channel filter=0.000000e+000 result=40 13:59:05 Config A/D Result=40 13:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:05 Get A/D filter: -9.255963e+061 result=40 13:59:05 Get A/D value=-858993460 result=40 13:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:05 Parameters OK 13:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:05 Set A/D data flow result=40 13:59:05 Set A/D channel type result=40 13:59:05 Set A/D encoding result=40 13:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:05 Set channel filter=0.000000e+000 result=40 13:59:05 Config A/D Result=40 13:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:05 Get A/D filter: -9.255963e+061 result=40 13:59:05 Get A/D value=-858993460 result=40 13:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:05 Aux= 13:59:05 Message to Camera, serial 144744 queued 13:59:42 Received message from Master: op=PointingHead serial=144757 13:59:42 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:59:42 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:59:42 Point started: ret=0 13:59:42 point_skyscan result=0 13:59:43 Check angles 13:59:43 SkyScan query 13:59:44 SkyScan query done: ret=0 az=153.225<-10215 ze=9.03<-11398 Statuses=0009 0009 13:59:44 Msec=0 True Az=153.225 Ze=9.03 Az status=0009 Ze status=0009 13:59:44 Check angles 13:59:44 SkyScan query 13:59:45 SkyScan query done: ret=0 az=135.81<-9054 ze=-12.015<-12801 Statuses=0009 0009 13:59:45 Msec=750 True Az=135.81 Ze=-12.015 Az status=0009 Ze status=0009 13:59:45 Check angles 13:59:45 SkyScan query 13:59:45 SkyScan query done: ret=0 az=118.29<-7886 ze=-32.91<-14194 Statuses=0009 0009 13:59:45 Msec=1500 True Az=118.29 Ze=-32.91 Az status=0009 Ze status=0009 13:59:45 Check angles 13:59:45 SkyScan query 13:59:46 SkyScan query done: ret=0 az=100.86<-6724 ze=-51.51<-15434 Statuses=0009 0009 13:59:46 Msec=2250 True Az=100.86 Ze=-51.51 Az status=0009 Ze status=0009 13:59:46 Check angles 13:59:46 SkyScan query 13:59:47 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:59:47 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:59:47 Check angles 13:59:47 SkyScan query 13:59:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:59:48 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:59:48 Message to Master queued w/err=0: serial=144757 error=0 13:59:53 Received message from Master: op=Filter serial=144758 13:59:53 Color wheel filter change from 0 to 0 13:59:53 FLIGetFilterPos err=0 currentPosition=0 13:59:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:53 Filter is already there-color wheel unchanged 13:59:53 Received message from Master: op=Shutter serial=144759 13:59:53 Shutter LASER close 13:59:53 Received message from Camera: op=State serial=144761 13:59:53 GetSingleValue result=40 Value=cccccccc 13:59:53 SkyScan query 13:59:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:59:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:53 Parameters OK 13:59:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:53 Set A/D data flow result=40 13:59:53 Set A/D channel type result=40 13:59:53 Set A/D encoding result=40 13:59:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:53 Set channel filter=0.000000e+000 result=40 13:59:53 Config A/D Result=40 13:59:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:53 Get A/D filter: -9.255963e+061 result=40 13:59:53 Get A/D value=-858993460 result=40 13:59:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:53 Parameters OK 13:59:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:53 Set A/D data flow result=40 13:59:53 Set A/D channel type result=40 13:59:53 Set A/D encoding result=40 13:59:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:53 Set channel filter=0.000000e+000 result=40 13:59:53 Config A/D Result=40 13:59:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:53 Get A/D filter: -9.255963e+061 result=40 13:59:53 Get A/D value=-858993460 result=40 13:59:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:53 Aux= 13:59:53 Message to Camera, serial 144761 queued 14:00:30 Received message from Master: op=PointingHead serial=144774 14:00:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:00:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:00:30 Point started: ret=0 14:00:30 point_skyscan result=0 14:00:31 Check angles 14:00:31 SkyScan query 14:00:32 SkyScan query done: ret=0 az=109.305<-7287 ze=-81.675<-17445 Statuses=0009 0009 14:00:32 Msec=0 True Az=109.305 Ze=-81.675 Az status=0009 Ze status=0009 14:00:32 Check angles 14:00:32 SkyScan query 14:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.02<-18868 Statuses=0008 0009 14:00:33 Msec=750 True Az=112.995 Ze=-103.02 Az status=0008 Ze status=0009 14:00:33 Check angles 14:00:33 SkyScan query 14:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.005<-20267 Statuses=0008 0009 14:00:33 Msec=1500 True Az=112.995 Ze=-124.005 Az status=0008 Ze status=0009 14:00:33 Check angles 14:00:33 SkyScan query 14:00:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.915<-21661 Statuses=0008 0009 14:00:34 Msec=2250 True Az=112.995 Ze=-144.915 Az status=0008 Ze status=0009 14:00:34 Check angles 14:00:34 SkyScan query 14:00:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.335<-23089 Statuses=0008 0009 14:00:35 Msec=3000 True Az=112.995 Ze=-166.335 Az status=0008 Ze status=0009 14:00:35 Check angles 14:00:35 SkyScan query 14:00:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:00:36 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:00:36 Message to Master queued w/err=0: serial=144774 error=0 14:00:41 Received message from Master: op=Filter serial=144775 14:00:41 Color wheel filter change from 0 to 0 14:00:41 FLIGetFilterPos err=0 currentPosition=0 14:00:41 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:41 Filter is already there-color wheel unchanged 14:00:41 Received message from Master: op=Shutter serial=144776 14:00:41 Shutter LASER open 14:00:41 Received message from Camera: op=State serial=144778 14:00:41 GetSingleValue result=40 Value=cccccccc 14:00:41 SkyScan query 14:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:00:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:42 Parameters OK 14:00:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:42 Set A/D data flow result=40 14:00:42 Set A/D channel type result=40 14:00:42 Set A/D encoding result=40 14:00:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:42 Set channel filter=0.000000e+000 result=40 14:00:42 Config A/D Result=40 14:00:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:42 Get A/D filter: -9.255963e+061 result=40 14:00:42 Get A/D value=-858993460 result=40 14:00:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:42 Parameters OK 14:00:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:42 Set A/D data flow result=40 14:00:42 Set A/D channel type result=40 14:00:42 Set A/D encoding result=40 14:00:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:42 Set channel filter=0.000000e+000 result=40 14:00:42 Config A/D Result=40 14:00:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:42 Get A/D filter: -9.255963e+061 result=40 14:00:42 Get A/D value=-858993460 result=40 14:00:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:42 Aux= 14:00:42 Message to Camera, serial 144778 queued 14:00:50 Received message from Master: op=Shutter serial=144788 14:00:50 Shutter LASER close 14:00:50 Received message from Master: op=PointingHead serial=144792 14:00:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:00:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:00:51 Point started: ret=0 14:00:51 point_skyscan result=0 14:00:52 Check angles 14:00:52 SkyScan query 14:00:52 SkyScan query done: ret=0 az=89.55<-5970 ze=156.72<-1552 Statuses=0009 0009 14:00:52 Msec=0 True Az=89.55 Ze=156.72 Az status=0009 Ze status=0009 14:00:52 Check angles 14:00:52 SkyScan query 14:00:53 SkyScan query done: ret=0 az=72.015<-4801 ze=135.78<-2948 Statuses=0009 0009 14:00:53 Msec=750 True Az=72.015 Ze=135.78 Az status=0009 Ze status=0009 14:00:53 Check angles 14:00:53 SkyScan query 14:00:54 SkyScan query done: ret=0 az=54.495<-3633 ze=114.66<-4356 Statuses=0009 0009 14:00:54 Msec=1500 True Az=54.495 Ze=114.66 Az status=0009 Ze status=0009 14:00:54 Check angles 14:00:54 SkyScan query 14:00:54 SkyScan query done: ret=0 az=40.98<-2732 ze=93.405<-5773 Statuses=0009 0009 14:00:54 Msec=2250 True Az=40.98 Ze=93.405 Az status=0009 Ze status=0009 14:00:55 Check angles 14:00:55 SkyScan query 14:00:55 SkyScan query done: ret=0 az=40.98<-2732 ze=72.465<-7169 Statuses=0008 0009 14:00:55 Msec=3000 True Az=40.98 Ze=72.465 Az status=0008 Ze status=0009 14:00:55 Check angles 14:00:55 SkyScan query 14:00:56 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 14:00:56 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 14:00:56 Check angles 14:00:56 SkyScan query 14:00:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:00:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:00:57 Message to Master queued w/err=0: serial=144792 error=0 14:01:02 Received message from Master: op=Filter serial=144793 14:01:02 Color wheel filter change from 0 to 0 14:01:02 FLIGetFilterPos err=0 currentPosition=0 14:01:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:02 Filter is already there-color wheel unchanged 14:01:02 Received message from Master: op=Shutter serial=144794 14:01:02 Shutter LASER close 14:01:02 Received message from Camera: op=State serial=144796 14:01:02 GetSingleValue result=40 Value=cccccccc 14:01:02 SkyScan query 14:01:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:01:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:03 Parameters OK 14:01:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:03 Set A/D data flow result=40 14:01:03 Set A/D channel type result=40 14:01:03 Set A/D encoding result=40 14:01:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:03 Set channel filter=0.000000e+000 result=40 14:01:03 Config A/D Result=40 14:01:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:03 Get A/D filter: -9.255963e+061 result=40 14:01:03 Get A/D value=-858993460 result=40 14:01:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:03 Parameters OK 14:01:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:03 Set A/D data flow result=40 14:01:03 Set A/D channel type result=40 14:01:03 Set A/D encoding result=40 14:01:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:03 Set channel filter=0.000000e+000 result=40 14:01:03 Config A/D Result=40 14:01:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:03 Get A/D filter: -9.255963e+061 result=40 14:01:03 Get A/D value=-858993460 result=40 14:01:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:03 Aux= 14:01:03 Message to Camera, serial 144796 queued 14:01:40 Received message from Master: op=PointingHead serial=144809 14:01:40 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:01:40 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:01:40 Point started: ret=0 14:01:40 point_skyscan result=0 14:01:41 Check angles 14:01:41 SkyScan query 14:01:41 SkyScan query done: ret=0 az=63.99<-4266 ze=66.54<-7564 Statuses=0009 0008 14:01:41 Msec=0 True Az=63.99 Ze=66.54 Az status=0009 Ze status=0008 14:01:41 Check angles 14:01:41 SkyScan query 14:01:42 SkyScan query done: ret=0 az=82.035<-5469 ze=66.51<-7566 Statuses=0009 0008 14:01:42 Msec=750 True Az=82.035 Ze=66.51 Az status=0009 Ze status=0008 14:01:42 Check angles 14:01:42 SkyScan query 14:01:43 SkyScan query done: ret=0 az=99.705<-6647 ze=66.495<-7567 Statuses=0009 0008 14:01:43 Msec=1500 True Az=99.705 Ze=66.495 Az status=0009 Ze status=0008 14:01:43 Check angles 14:01:43 SkyScan query 14:01:43 SkyScan query done: ret=0 az=117.255<-7817 ze=66.495<-7567 Statuses=0009 0008 14:01:43 Msec=2250 True Az=117.255 Ze=66.495 Az status=0009 Ze status=0008 14:01:44 Check angles 14:01:44 SkyScan query 14:01:44 SkyScan query done: ret=0 az=134.73<-8982 ze=66.495<-7567 Statuses=0009 0008 14:01:44 Msec=3000 True Az=134.73 Ze=66.495 Az status=0009 Ze status=0008 14:01:44 Check angles 14:01:44 SkyScan query 14:01:45 SkyScan query done: ret=0 az=152.49<-10166 ze=66.495<-7567 Statuses=0009 0008 14:01:45 Msec=3750 True Az=152.49 Ze=66.495 Az status=0009 Ze status=0008 14:01:45 Check angles 14:01:45 SkyScan query 14:01:46 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 14:01:46 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 14:01:46 Message to Master queued w/err=0: serial=144809 error=0 14:01:51 Received message from Master: op=Filter serial=144810 14:01:51 Color wheel filter change from 0 to 0 14:01:51 FLIGetFilterPos err=0 currentPosition=0 14:01:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:51 Filter is already there-color wheel unchanged 14:01:51 Received message from Master: op=Shutter serial=144811 14:01:51 Shutter LASER close 14:01:51 Received message from Camera: op=State serial=144813 14:01:51 GetSingleValue result=40 Value=cccccccc 14:01:51 SkyScan query 14:01:52 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:01:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:52 Parameters OK 14:01:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:52 Set A/D data flow result=40 14:01:52 Set A/D channel type result=40 14:01:52 Set A/D encoding result=40 14:01:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:52 Set channel filter=0.000000e+000 result=40 14:01:52 Config A/D Result=40 14:01:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:52 Get A/D filter: -9.255963e+061 result=40 14:01:52 Get A/D value=-858993460 result=40 14:01:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:52 Parameters OK 14:01:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:52 Set A/D data flow result=40 14:01:52 Set A/D channel type result=40 14:01:52 Set A/D encoding result=40 14:01:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:52 Set channel filter=0.000000e+000 result=40 14:01:52 Config A/D Result=40 14:01:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:52 Get A/D filter: -9.255963e+061 result=40 14:01:52 Get A/D value=-858993460 result=40 14:01:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:52 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:52 Aux= 14:01:52 Message to Camera, serial 144813 queued 14:02:28 Received message from Master: op=PointingHead serial=144826 14:02:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:02:28 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:02:29 Point started: ret=0 14:02:29 point_skyscan result=0 14:02:29 Check angles 14:02:29 SkyScan query 14:02:30 SkyScan query done: ret=0 az=134.505<-8967 ze=36.18<-9588 Statuses=0009 0009 14:02:30 Msec=0 True Az=134.505 Ze=36.18 Az status=0009 Ze status=0009 14:02:30 Check angles 14:02:30 SkyScan query 14:02:31 SkyScan query done: ret=0 az=116.985<-7799 ze=15.255<-10983 Statuses=0009 0009 14:02:31 Msec=750 True Az=116.985 Ze=15.255 Az status=0009 Ze status=0009 14:02:31 Check angles 14:02:31 SkyScan query 14:02:32 SkyScan query done: ret=0 az=99.12<-6608 ze=-6.24<-12416 Statuses=0009 0009 14:02:32 Msec=1500 True Az=99.12 Ze=-6.24 Az status=0009 Ze status=0009 14:02:32 Check angles 14:02:32 SkyScan query 14:02:32 SkyScan query done: ret=0 az=81.465<-5431 ze=-27.57<-13838 Statuses=0009 0009 14:02:32 Msec=2250 True Az=81.465 Ze=-27.57 Az status=0009 Ze status=0009 14:02:33 Check angles 14:02:33 SkyScan query 14:02:33 SkyScan query done: ret=0 az=63.525<-4235 ze=-38.58<-14572 Statuses=0009 0008 14:02:33 Msec=3000 True Az=63.525 Ze=-38.58 Az status=0009 Ze status=0008 14:02:33 Check angles 14:02:33 SkyScan query 14:02:34 SkyScan query done: ret=0 az=46.125<-3075 ze=-38.52<-14568 Statuses=0009 0008 14:02:34 Msec=3750 True Az=46.125 Ze=-38.52 Az status=0009 Ze status=0008 14:02:34 Check angles 14:02:34 SkyScan query 14:02:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:02:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:02:35 Message to Master queued w/err=0: serial=144826 error=0 14:02:40 Received message from Master: op=Filter serial=144827 14:02:40 Color wheel filter change from 0 to 0 14:02:40 FLIGetFilterPos err=0 currentPosition=0 14:02:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:40 Filter is already there-color wheel unchanged 14:02:40 Received message from Master: op=Shutter serial=144828 14:02:40 Shutter LASER close 14:02:40 Received message from Camera: op=State serial=144830 14:02:40 GetSingleValue result=40 Value=cccccccc 14:02:40 SkyScan query 14:02:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:02:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:40 Parameters OK 14:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:40 Set A/D data flow result=40 14:02:40 Set A/D channel type result=40 14:02:40 Set A/D encoding result=40 14:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:40 Set channel filter=0.000000e+000 result=40 14:02:40 Config A/D Result=40 14:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:40 Get A/D filter: -9.255963e+061 result=40 14:02:40 Get A/D value=-858993460 result=40 14:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:40 Parameters OK 14:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:40 Set A/D data flow result=40 14:02:40 Set A/D channel type result=40 14:02:40 Set A/D encoding result=40 14:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:40 Set channel filter=0.000000e+000 result=40 14:02:40 Config A/D Result=40 14:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:40 Get A/D filter: -9.255963e+061 result=40 14:02:40 Get A/D value=-858993460 result=40 14:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:40 Aux= 14:02:40 Message to Camera, serial 144830 queued 14:03:17 Received message from Master: op=PointingHead serial=144843 14:03:17 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:03:17 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:03:18 Point started: ret=0 14:03:18 point_skyscan result=0 14:03:18 Check angles 14:03:18 SkyScan query 14:03:19 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.43<-16562 Statuses=0009 0009 14:03:19 Msec=0 True Az=64.095 Ze=-68.43 Az status=0009 Ze status=0009 14:03:19 Check angles 14:03:19 SkyScan query 14:03:20 SkyScan query done: ret=0 az=82.005<-5467 ze=-89.895<-17993 Statuses=0009 0009 14:03:20 Msec=750 True Az=82.005 Ze=-89.895 Az status=0009 Ze status=0009 14:03:20 Check angles 14:03:20 SkyScan query 14:03:20 SkyScan query done: ret=0 az=99.795<-6653 ze=-111.165<-19411 Statuses=0009 0009 14:03:20 Msec=1500 True Az=99.795 Ze=-111.165 Az status=0009 Ze status=0009 14:03:21 Check angles 14:03:21 SkyScan query 14:03:21 SkyScan query done: ret=0 az=117.225<-7815 ze=-132.105<-20807 Statuses=0009 0009 14:03:21 Msec=2250 True Az=117.225 Ze=-132.105 Az status=0009 Ze status=0009 14:03:21 Check angles 14:03:21 SkyScan query 14:03:22 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.57<-21438 Statuses=0009 0008 14:03:22 Msec=3000 True Az=131.025 Ze=-141.57 Az status=0009 Ze status=0008 14:03:22 Check angles 14:03:22 SkyScan query 14:03:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 14:03:23 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 14:03:23 Message to Master queued w/err=0: serial=144843 error=0 14:03:28 Received message from Master: op=Filter serial=144844 14:03:28 Color wheel filter change from 0 to 0 14:03:28 FLIGetFilterPos err=0 currentPosition=0 14:03:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:28 Filter is already there-color wheel unchanged 14:03:28 Received message from Master: op=Shutter serial=144845 14:03:28 Shutter LASER close 14:03:28 Received message from Camera: op=State serial=144847 14:03:28 GetSingleValue result=40 Value=cccccccc 14:03:28 SkyScan query 14:03:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:03:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:28 Parameters OK 14:03:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:28 Set A/D data flow result=40 14:03:28 Set A/D channel type result=40 14:03:28 Set A/D encoding result=40 14:03:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:28 Set channel filter=0.000000e+000 result=40 14:03:28 Config A/D Result=40 14:03:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:28 Get A/D filter: -9.255963e+061 result=40 14:03:28 Get A/D value=-858993460 result=40 14:03:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:28 Parameters OK 14:03:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:28 Set A/D data flow result=40 14:03:28 Set A/D channel type result=40 14:03:28 Set A/D encoding result=40 14:03:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:28 Set channel filter=0.000000e+000 result=40 14:03:28 Config A/D Result=40 14:03:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:28 Get A/D filter: -9.255963e+061 result=40 14:03:28 Get A/D value=-858993460 result=40 14:03:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:28 Aux= 14:03:28 Message to Camera, serial 144847 queued 14:04:05 Received message from Master: op=PointingHead serial=144860 14:04:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:04:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:04:06 Point started: ret=0 14:04:06 point_skyscan result=0 14:04:06 Check angles 14:04:06 SkyScan query 14:04:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0009 0009 14:04:07 Msec=0 True Az=112.995 Ze=-171.165 Az status=0009 Ze status=0009 14:04:07 Check angles 14:04:07 SkyScan query 14:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:04:08 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:04:08 Message to Master queued w/err=0: serial=144860 error=0 14:04:13 Received message from Master: op=Filter serial=144861 14:04:13 Color wheel filter change from 0 to 0 14:04:13 FLIGetFilterPos err=0 currentPosition=0 14:04:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:13 Filter is already there-color wheel unchanged 14:04:13 Received message from Master: op=Shutter serial=144862 14:04:13 Shutter LASER open 14:04:13 Received message from Camera: op=State serial=144864 14:04:13 GetSingleValue result=40 Value=cccccccc 14:04:13 SkyScan query 14:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:04:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:14 Parameters OK 14:04:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:14 Set A/D data flow result=40 14:04:14 Set A/D channel type result=40 14:04:14 Set A/D encoding result=40 14:04:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:14 Set channel filter=0.000000e+000 result=40 14:04:14 Config A/D Result=40 14:04:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:14 Get A/D filter: -9.255963e+061 result=40 14:04:14 Get A/D value=-858993460 result=40 14:04:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:14 Parameters OK 14:04:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:14 Set A/D data flow result=40 14:04:14 Set A/D channel type result=40 14:04:14 Set A/D encoding result=40 14:04:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:14 Set channel filter=0.000000e+000 result=40 14:04:14 Config A/D Result=40 14:04:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:14 Get A/D filter: -9.255963e+061 result=40 14:04:14 Get A/D value=-858993460 result=40 14:04:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:14 Aux= 14:04:14 Message to Camera, serial 144864 queued 14:04:22 Received message from Master: op=Shutter serial=144874 14:04:22 Shutter LASER close 14:04:23 Received message from Master: op=PointingHead serial=144878 14:04:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:04:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:04:23 Point started: ret=0 14:04:23 point_skyscan result=0 14:04:24 Check angles 14:04:24 SkyScan query 14:04:24 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.98<-21532 Statuses=0009 0009 14:04:24 Msec=0 True Az=136.23 Ze=-142.98 Az status=0009 Ze status=0009 14:04:25 Check angles 14:04:25 SkyScan query 14:04:25 SkyScan query done: ret=0 az=153.66<-10244 ze=-122.04<-20136 Statuses=0009 0009 14:04:25 Msec=750 True Az=153.66 Ze=-122.04 Az status=0009 Ze status=0009 14:04:25 Check angles 14:04:25 SkyScan query 14:04:26 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.01<-18734 Statuses=0009 0009 14:04:26 Msec=1500 True Az=171.24 Ze=-101.01 Az status=0009 Ze status=0009 14:04:26 Check angles 14:04:26 SkyScan query 14:04:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.665<-17311 Statuses=0008 0009 14:04:27 Msec=2250 True Az=176.01 Ze=-79.665 Az status=0008 Ze status=0009 14:04:27 Check angles 14:04:27 SkyScan query 14:04:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 14:04:27 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 14:04:28 Check angles 14:04:28 SkyScan query 14:04:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 14:04:28 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 14:04:28 Message to Master queued w/err=0: serial=144878 error=0 14:04:33 Received message from Master: op=Filter serial=144879 14:04:33 Color wheel filter change from 0 to 0 14:04:33 FLIGetFilterPos err=0 currentPosition=0 14:04:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:33 Filter is already there-color wheel unchanged 14:04:33 Received message from Master: op=Shutter serial=144880 14:04:33 Shutter LASER close 14:04:33 Received message from Camera: op=State serial=144882 14:04:33 GetSingleValue result=40 Value=cccccccc 14:04:33 SkyScan query 14:04:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:04:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:34 Parameters OK 14:04:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:34 Set A/D data flow result=40 14:04:34 Set A/D channel type result=40 14:04:34 Set A/D encoding result=40 14:04:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:34 Set channel filter=0.000000e+000 result=40 14:04:34 Config A/D Result=40 14:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:34 Get A/D filter: -9.255963e+061 result=40 14:04:34 Get A/D value=-858993460 result=40 14:04:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:34 Parameters OK 14:04:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:34 Set A/D data flow result=40 14:04:34 Set A/D channel type result=40 14:04:34 Set A/D encoding result=40 14:04:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:34 Set channel filter=0.000000e+000 result=40 14:04:34 Config A/D Result=40 14:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:34 Get A/D filter: -9.255963e+061 result=40 14:04:34 Get A/D value=-858993460 result=40 14:04:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:34 Aux= 14:04:34 Message to Camera, serial 144882 queued 14:05:11 Received message from Master: op=PointingHead serial=144895 14:05:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:05:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:05:11 Point started: ret=0 14:05:11 point_skyscan result=0 14:05:12 Check angles 14:05:12 SkyScan query 14:05:13 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.12<-13408 Statuses=0009 0009 14:05:13 Msec=0 True Az=152.655 Ze=-21.12 Az status=0009 Ze status=0009 14:05:13 Check angles 14:05:13 SkyScan query 14:05:13 SkyScan query done: ret=0 az=134.58<-8972 ze=0.135<-11991 Statuses=0009 0009 14:05:13 Msec=750 True Az=134.58 Ze=0.135 Az status=0009 Ze status=0009 14:05:14 Check angles 14:05:14 SkyScan query 14:05:14 SkyScan query done: ret=0 az=117.27<-7818 ze=21.12<-10592 Statuses=0009 0009 14:05:14 Msec=1500 True Az=117.27 Ze=21.12 Az status=0009 Ze status=0009 14:05:14 Check angles 14:05:14 SkyScan query 14:05:15 SkyScan query done: ret=0 az=99.84<-6656 ze=42.03<-9198 Statuses=0009 0009 14:05:15 Msec=2250 True Az=99.84 Ze=42.03 Az status=0009 Ze status=0009 14:05:15 Check angles 14:05:15 SkyScan query 14:05:16 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 14:05:16 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 14:05:16 Check angles 14:05:16 SkyScan query 14:05:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:05:16 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 14:05:16 Message to Master queued w/err=0: serial=144895 error=0 14:05:21 Received message from Master: op=Filter serial=144896 14:05:21 Color wheel filter change from 0 to 0 14:05:21 FLIGetFilterPos err=0 currentPosition=0 14:05:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:21 Filter is already there-color wheel unchanged 14:05:22 Received message from Master: op=Shutter serial=144897 14:05:22 Shutter LASER close 14:05:22 Received message from Camera: op=State serial=144899 14:05:22 GetSingleValue result=40 Value=cccccccc 14:05:22 SkyScan query 14:05:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:05:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:22 Parameters OK 14:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:22 Set A/D data flow result=40 14:05:22 Set A/D channel type result=40 14:05:22 Set A/D encoding result=40 14:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:22 Set channel filter=0.000000e+000 result=40 14:05:22 Config A/D Result=40 14:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:22 Get A/D filter: -9.255963e+061 result=40 14:05:22 Get A/D value=-858993460 result=40 14:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:22 Parameters OK 14:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:22 Set A/D data flow result=40 14:05:22 Set A/D channel type result=40 14:05:22 Set A/D encoding result=40 14:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:22 Set channel filter=0.000000e+000 result=40 14:05:22 Config A/D Result=40 14:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:22 Get A/D filter: -9.255963e+061 result=40 14:05:22 Get A/D value=-858993460 result=40 14:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:22 Aux= 14:05:22 Message to Camera, serial 144899 queued 14:05:59 Received message from Master: op=PointingHead serial=144912 14:05:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:05:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:05:59 Point started: ret=0 14:05:59 point_skyscan result=0 14:06:00 Check angles 14:06:00 SkyScan query 14:06:01 SkyScan query done: ret=0 az=109.095<-7273 ze=38.49<-9434 Statuses=0009 0008 14:06:01 Msec=0 True Az=109.095 Ze=38.49 Az status=0009 Ze status=0008 14:06:01 Check angles 14:06:01 SkyScan query 14:06:01 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 14:06:01 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 14:06:02 Check angles 14:06:02 SkyScan query 14:06:02 SkyScan query done: ret=0 az=144.36<-9624 ze=38.505<-9433 Statuses=0009 0008 14:06:02 Msec=1500 True Az=144.36 Ze=38.505 Az status=0009 Ze status=0008 14:06:02 Check angles 14:06:02 SkyScan query [UTC 2018-12-14 14:06:03] 14:06:03 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 14:06:03 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 14:06:03 Check angles 14:06:03 SkyScan query 14:06:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 14:06:04 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 14:06:04 Check angles 14:06:04 SkyScan query 14:06:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:06:04 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:06:04 Message to Master queued w/err=0: serial=144912 error=0 14:06:09 Received message from Master: op=Filter serial=144913 14:06:09 Color wheel filter change from 0 to 0 14:06:09 FLIGetFilterPos err=0 currentPosition=0 14:06:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:09 Filter is already there-color wheel unchanged 14:06:10 Received message from Master: op=Shutter serial=144914 14:06:10 Shutter LASER close 14:06:10 Received message from Camera: op=State serial=144916 14:06:10 GetSingleValue result=40 Value=cccccccc 14:06:10 SkyScan query 14:06:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:06:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:10 Parameters OK 14:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:10 Set A/D data flow result=40 14:06:10 Set A/D channel type result=40 14:06:10 Set A/D encoding result=40 14:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:10 Set channel filter=0.000000e+000 result=40 14:06:10 Config A/D Result=40 14:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:10 Get A/D filter: -9.255963e+061 result=40 14:06:10 Get A/D value=-858993460 result=40 14:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:10 Parameters OK 14:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:10 Set A/D data flow result=40 14:06:10 Set A/D channel type result=40 14:06:10 Set A/D encoding result=40 14:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:10 Set channel filter=0.000000e+000 result=40 14:06:10 Config A/D Result=40 14:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:10 Get A/D filter: -9.255963e+061 result=40 14:06:10 Get A/D value=-858993460 result=40 14:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:10 Aux= 14:06:10 Message to Camera, serial 144916 queued 14:06:47 Received message from Master: op=PointingHead serial=144929 14:06:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:06:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:06:47 Point started: ret=0 14:06:47 point_skyscan result=0 14:06:48 Check angles 14:06:48 SkyScan query 14:06:49 SkyScan query done: ret=0 az=152.76<-10184 ze=8.46<-11436 Statuses=0009 0009 14:06:49 Msec=0 True Az=152.76 Ze=8.46 Az status=0009 Ze status=0009 14:06:49 Check angles 14:06:49 SkyScan query 14:06:50 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.435<-12829 Statuses=0009 0009 14:06:50 Msec=750 True Az=135.375 Ze=-12.435 Az status=0009 Ze status=0009 14:06:50 Check angles 14:06:50 SkyScan query 14:06:50 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.45<-14230 Statuses=0009 0009 14:06:50 Msec=1500 True Az=117.81 Ze=-33.45 Az status=0009 Ze status=0009 14:06:50 Check angles 14:06:50 SkyScan query 14:06:51 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.57<-15438 Statuses=0009 0009 14:06:51 Msec=2250 True Az=100.05 Ze=-51.57 Az status=0009 Ze status=0009 14:06:51 Check angles 14:06:51 SkyScan query 14:06:52 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 14:06:52 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 14:06:52 Check angles 14:06:52 SkyScan query 14:06:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:06:53 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:06:53 Message to Master queued w/err=0: serial=144929 error=0 14:06:58 Received message from Master: op=Filter serial=144930 14:06:58 Color wheel filter change from 0 to 0 14:06:58 FLIGetFilterPos err=0 currentPosition=0 14:06:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:58 Filter is already there-color wheel unchanged 14:06:58 Received message from Master: op=Shutter serial=144931 14:06:58 Shutter LASER close 14:06:58 Received message from Camera: op=State serial=144933 14:06:58 GetSingleValue result=40 Value=cccccccc 14:06:58 SkyScan query 14:06:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:06:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:58 Parameters OK 14:06:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:58 Set A/D data flow result=40 14:06:58 Set A/D channel type result=40 14:06:58 Set A/D encoding result=40 14:06:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:58 Set channel filter=0.000000e+000 result=40 14:06:58 Config A/D Result=40 14:06:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:58 Get A/D filter: -9.255963e+061 result=40 14:06:58 Get A/D value=-858993460 result=40 14:06:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:58 Parameters OK 14:06:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:58 Set A/D data flow result=40 14:06:58 Set A/D channel type result=40 14:06:58 Set A/D encoding result=40 14:06:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:58 Set channel filter=0.000000e+000 result=40 14:06:58 Config A/D Result=40 14:06:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:58 Get A/D filter: -9.255963e+061 result=40 14:06:58 Get A/D value=-858993460 result=40 14:06:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:58 Aux= 14:06:58 Message to Camera, serial 144933 queued 14:07:35 Received message from Master: op=PointingHead serial=144946 14:07:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:07:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:07:36 Point started: ret=0 14:07:36 point_skyscan result=0 14:07:36 Check angles 14:07:36 SkyScan query 14:07:37 SkyScan query done: ret=0 az=109.32<-7288 ze=-81.51<-17434 Statuses=0009 0009 14:07:37 Msec=0 True Az=109.32 Ze=-81.51 Az status=0009 Ze status=0009 14:07:37 Check angles 14:07:37 SkyScan query 14:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.45<-18830 Statuses=0008 0009 14:07:38 Msec=750 True Az=112.995 Ze=-102.45 Az status=0008 Ze status=0009 14:07:38 Check angles 14:07:38 SkyScan query 14:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 14:07:38 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 14:07:39 Check angles 14:07:39 SkyScan query 14:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 14:07:39 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 14:07:39 Check angles 14:07:39 SkyScan query 14:07:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 14:07:40 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 14:07:40 Check angles 14:07:40 SkyScan query 14:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:07:41 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:07:41 Message to Master queued w/err=0: serial=144946 error=0 14:07:46 Received message from Master: op=Filter serial=144947 14:07:46 Color wheel filter change from 0 to 0 14:07:46 FLIGetFilterPos err=0 currentPosition=0 14:07:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:46 Filter is already there-color wheel unchanged 14:07:46 Received message from Master: op=Shutter serial=144948 14:07:46 Shutter LASER open 14:07:46 Received message from Camera: op=State serial=144950 14:07:46 GetSingleValue result=40 Value=cccccccc 14:07:46 SkyScan query 14:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:07:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:47 Parameters OK 14:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:47 Set A/D data flow result=40 14:07:47 Set A/D channel type result=40 14:07:47 Set A/D encoding result=40 14:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:47 Set channel filter=0.000000e+000 result=40 14:07:47 Config A/D Result=40 14:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:47 Get A/D filter: -9.255963e+061 result=40 14:07:47 Get A/D value=-858993460 result=40 14:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:47 Parameters OK 14:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:47 Set A/D data flow result=40 14:07:47 Set A/D channel type result=40 14:07:47 Set A/D encoding result=40 14:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:47 Set channel filter=0.000000e+000 result=40 14:07:47 Config A/D Result=40 14:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:47 Get A/D filter: -9.255963e+061 result=40 14:07:47 Get A/D value=-858993460 result=40 14:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:47 Aux= 14:07:47 Message to Camera, serial 144950 queued 14:07:55 Received message from Master: op=Shutter serial=144960 14:07:55 Shutter LASER close 14:07:55 Received message from Master: op=PointingHead serial=144964 14:07:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:07:55 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:07:56 Point started: ret=0 14:07:56 point_skyscan result=0 14:07:57 Check angles 14:07:57 SkyScan query 14:07:57 SkyScan query done: ret=0 az=89.805<-5987 ze=157.155<-1523 Statuses=0009 0009 14:07:57 Msec=0 True Az=89.805 Ze=157.155 Az status=0009 Ze status=0009 14:07:57 Check angles 14:07:57 SkyScan query 14:07:58 SkyScan query done: ret=0 az=71.97<-4798 ze=135.78<-2948 Statuses=0009 0009 14:07:58 Msec=750 True Az=71.97 Ze=135.78 Az status=0009 Ze status=0009 14:07:58 Check angles 14:07:58 SkyScan query 14:07:59 SkyScan query done: ret=0 az=54.51<-3634 ze=114.78<-4348 Statuses=0009 0009 14:07:59 Msec=1500 True Az=54.51 Ze=114.78 Az status=0009 Ze status=0009 14:07:59 Check angles 14:07:59 SkyScan query 14:07:59 SkyScan query done: ret=0 az=40.98<-2732 ze=93.84<-5744 Statuses=0009 0009 14:07:59 Msec=2250 True Az=40.98 Ze=93.84 Az status=0009 Ze status=0009 14:08:00 Check angles 14:08:00 SkyScan query 14:08:00 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 14:08:00 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 14:08:00 Check angles 14:08:00 SkyScan query 14:08:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 14:08:01 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 14:08:01 Check angles 14:08:01 SkyScan query 14:08:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:08:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:08:02 Message to Master queued w/err=0: serial=144964 error=0 14:08:07 Received message from Master: op=Filter serial=144965 14:08:07 Color wheel filter change from 0 to 0 14:08:07 FLIGetFilterPos err=0 currentPosition=0 14:08:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:07 Filter is already there-color wheel unchanged 14:08:07 Received message from Master: op=Shutter serial=144966 14:08:07 Shutter LASER close 14:08:07 Received message from Camera: op=State serial=144968 14:08:07 GetSingleValue result=40 Value=cccccccc 14:08:07 SkyScan query 14:08:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:08:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:08 Parameters OK 14:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:08 Set A/D data flow result=40 14:08:08 Set A/D channel type result=40 14:08:08 Set A/D encoding result=40 14:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:08 Set channel filter=0.000000e+000 result=40 14:08:08 Config A/D Result=40 14:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:08 Get A/D filter: -9.255963e+061 result=40 14:08:08 Get A/D value=-858993460 result=40 14:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:08 Parameters OK 14:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:08 Set A/D data flow result=40 14:08:08 Set A/D channel type result=40 14:08:08 Set A/D encoding result=40 14:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:08 Set channel filter=0.000000e+000 result=40 14:08:08 Config A/D Result=40 14:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:08 Get A/D filter: -9.255963e+061 result=40 14:08:08 Get A/D value=-858993460 result=40 14:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:08 Aux= 14:08:08 Message to Camera, serial 144968 queued 14:08:44 Received message from Master: op=PointingHead serial=144981 14:08:44 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:08:44 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:08:45 Point started: ret=0 14:08:45 point_skyscan result=0 14:08:45 Check angles 14:08:45 SkyScan query 14:08:46 SkyScan query done: ret=0 az=63.93<-4262 ze=66.555<-7563 Statuses=0009 0008 14:08:46 Msec=0 True Az=63.93 Ze=66.555 Az status=0009 Ze status=0008 14:08:46 Check angles 14:08:46 SkyScan query 14:08:47 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 14:08:47 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 14:08:47 Check angles 14:08:47 SkyScan query 14:08:48 SkyScan query done: ret=0 az=99.045<-6603 ze=66.495<-7567 Statuses=0009 0008 14:08:48 Msec=1500 True Az=99.045 Ze=66.495 Az status=0009 Ze status=0008 14:08:48 Check angles 14:08:48 SkyScan query 14:08:48 SkyScan query done: ret=0 az=116.385<-7759 ze=66.495<-7567 Statuses=0009 0008 14:08:48 Msec=2250 True Az=116.385 Ze=66.495 Az status=0009 Ze status=0008 14:08:48 Check angles 14:08:48 SkyScan query 14:08:49 SkyScan query done: ret=0 az=133.935<-8929 ze=66.495<-7567 Statuses=0009 0008 14:08:49 Msec=3000 True Az=133.935 Ze=66.495 Az status=0009 Ze status=0008 14:08:49 Check angles 14:08:49 SkyScan query 14:08:50 SkyScan query done: ret=0 az=151.38<-10092 ze=66.495<-7567 Statuses=0009 0008 14:08:50 Msec=3750 True Az=151.38 Ze=66.495 Az status=0009 Ze status=0008 14:08:50 Check angles 14:08:50 SkyScan query 14:08:51 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 14:08:51 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 14:08:51 Message to Master queued w/err=0: serial=144981 error=0 14:08:56 Received message from Master: op=Filter serial=144982 14:08:56 Color wheel filter change from 0 to 0 14:08:56 FLIGetFilterPos err=0 currentPosition=0 14:08:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:56 Filter is already there-color wheel unchanged 14:08:56 Received message from Master: op=Shutter serial=144983 14:08:56 Shutter LASER close 14:08:56 Received message from Camera: op=State serial=144985 14:08:56 GetSingleValue result=40 Value=cccccccc 14:08:56 SkyScan query 14:08:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:08:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:56 Parameters OK 14:08:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:56 Set A/D data flow result=40 14:08:56 Set A/D channel type result=40 14:08:56 Set A/D encoding result=40 14:08:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:56 Set channel filter=0.000000e+000 result=40 14:08:56 Config A/D Result=40 14:08:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:56 Get A/D filter: -9.255963e+061 result=40 14:08:56 Get A/D value=-858993460 result=40 14:08:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:56 Parameters OK 14:08:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:56 Set A/D data flow result=40 14:08:56 Set A/D channel type result=40 14:08:56 Set A/D encoding result=40 14:08:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:56 Set channel filter=0.000000e+000 result=40 14:08:56 Config A/D Result=40 14:08:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:56 Get A/D filter: -9.255963e+061 result=40 14:08:56 Get A/D value=-858993460 result=40 14:08:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:56 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:56 Aux= 14:08:56 Message to Camera, serial 144985 queued 14:09:33 Received message from Master: op=PointingHead serial=144998 14:09:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:09:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:09:34 Point started: ret=0 14:09:34 point_skyscan result=0 14:09:34 Check angles 14:09:34 SkyScan query 14:09:35 SkyScan query done: ret=0 az=134.715<-8981 ze=36.42<-9572 Statuses=0009 0009 14:09:35 Msec=0 True Az=134.715 Ze=36.42 Az status=0009 Ze status=0009 14:09:35 Check angles 14:09:35 SkyScan query 14:09:36 SkyScan query done: ret=0 az=116.895<-7793 ze=15.015<-10999 Statuses=0009 0009 14:09:36 Msec=750 True Az=116.895 Ze=15.015 Az status=0009 Ze status=0009 14:09:36 Check angles 14:09:36 SkyScan query 14:09:36 SkyScan query done: ret=0 az=99.525<-6635 ze=-6<-12400 Statuses=0009 0009 14:09:36 Msec=1500 True Az=99.525 Ze=-6 Az status=0009 Ze status=0009 14:09:37 Check angles 14:09:37 SkyScan query 14:09:37 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.94<-13796 Statuses=0009 0009 14:09:37 Msec=2250 True Az=82.05 Ze=-26.94 Az status=0009 Ze status=0009 14:09:37 Check angles 14:09:37 SkyScan query 14:09:38 SkyScan query done: ret=0 az=64.155<-4277 ze=-38.58<-14572 Statuses=0009 0008 14:09:38 Msec=3000 True Az=64.155 Ze=-38.58 Az status=0009 Ze status=0008 14:09:38 Check angles 14:09:38 SkyScan query 14:09:39 SkyScan query done: ret=0 az=46.65<-3110 ze=-38.505<-14567 Statuses=0009 0008 14:09:39 Msec=3750 True Az=46.65 Ze=-38.505 Az status=0009 Ze status=0008 14:09:39 Check angles 14:09:39 SkyScan query 14:09:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:09:39 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:09:39 Message to Master queued w/err=0: serial=144998 error=0 14:09:44 Received message from Master: op=Filter serial=144999 14:09:44 Color wheel filter change from 0 to 0 14:09:44 FLIGetFilterPos err=0 currentPosition=0 14:09:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:44 Filter is already there-color wheel unchanged 14:09:45 Received message from Master: op=Shutter serial=145000 14:09:45 Shutter LASER close 14:09:45 Received message from Camera: op=State serial=145002 14:09:45 GetSingleValue result=40 Value=cccccccc 14:09:45 SkyScan query 14:09:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:09:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:45 Parameters OK 14:09:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:45 Set A/D data flow result=40 14:09:45 Set A/D channel type result=40 14:09:45 Set A/D encoding result=40 14:09:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:45 Set channel filter=0.000000e+000 result=40 14:09:45 Config A/D Result=40 14:09:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:45 Get A/D filter: -9.255963e+061 result=40 14:09:45 Get A/D value=-858993460 result=40 14:09:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:45 Parameters OK 14:09:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:45 Set A/D data flow result=40 14:09:45 Set A/D channel type result=40 14:09:45 Set A/D encoding result=40 14:09:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:45 Set channel filter=0.000000e+000 result=40 14:09:45 Config A/D Result=40 14:09:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:45 Get A/D filter: -9.255963e+061 result=40 14:09:45 Get A/D value=-858993460 result=40 14:09:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:45 Aux= 14:09:45 Message to Camera, serial 145002 queued 14:10:21 Received message from Master: op=PointingHead serial=145014 14:10:21 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:10:21 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:10:21 Point started: ret=0 14:10:21 point_skyscan result=0 14:10:22 Check angles 14:10:22 SkyScan query 14:10:23 SkyScan query done: ret=0 az=63.735<-4249 ze=-68.07<-16538 Statuses=0009 0009 14:10:23 Msec=0 True Az=63.735 Ze=-68.07 Az status=0009 Ze status=0009 14:10:23 Check angles 14:10:23 SkyScan query 14:10:23 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.055<-17937 Statuses=0009 0009 14:10:23 Msec=750 True Az=81.345 Ze=-89.055 Az status=0009 Ze status=0009 14:10:24 Check angles 14:10:24 SkyScan query 14:10:24 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.445<-19363 Statuses=0009 0009 14:10:24 Msec=1500 True Az=99.06 Ze=-110.445 Az status=0009 Ze status=0009 14:10:24 Check angles 14:10:24 SkyScan query 14:10:25 SkyScan query done: ret=0 az=116.61<-7774 ze=-131.355<-20757 Statuses=0009 0009 14:10:25 Msec=2250 True Az=116.61 Ze=-131.355 Az status=0009 Ze status=0009 14:10:25 Check angles 14:10:25 SkyScan query 14:10:26 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 14:10:26 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 14:10:26 Check angles 14:10:26 SkyScan query 14:10:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 14:10:27 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 14:10:27 Message to Master queued w/err=0: serial=145014 error=0 14:10:32 Received message from Master: op=Filter serial=145015 14:10:32 Color wheel filter change from 0 to 0 14:10:32 FLIGetFilterPos err=0 currentPosition=0 14:10:32 FLIGetStepsRemaining err=0 RemainingSteps=0 14:10:32 Filter is already there-color wheel unchanged 14:10:32 Received message from Master: op=Shutter serial=145016 14:10:32 Shutter LASER close 14:10:32 Received message from Camera: op=State serial=145018 14:10:32 GetSingleValue result=40 Value=cccccccc 14:10:32 SkyScan query 14:10:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:10:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:32 Parameters OK 14:10:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:32 Set A/D data flow result=40 14:10:32 Set A/D channel type result=40 14:10:32 Set A/D encoding result=40 14:10:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:32 Set channel filter=0.000000e+000 result=40 14:10:32 Config A/D Result=40 14:10:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:32 Get A/D filter: -9.255963e+061 result=40 14:10:32 Get A/D value=-858993460 result=40 14:10:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:32 Parameters OK 14:10:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:32 Set A/D data flow result=40 14:10:32 Set A/D channel type result=40 14:10:32 Set A/D encoding result=40 14:10:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:32 Set channel filter=0.000000e+000 result=40 14:10:32 Config A/D Result=40 14:10:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:32 Get A/D filter: -9.255963e+061 result=40 14:10:32 Get A/D value=-858993460 result=40 14:10:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:32 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:10:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:10:32 Aux= 14:10:32 Message to Camera, serial 145018 queued 14:11:09 Received message from Master: op=PointingHead serial=145031 14:11:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:11:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:11:09 Point started: ret=0 14:11:09 point_skyscan result=0 14:11:10 Check angles 14:11:10 SkyScan query 14:11:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0009 0009 14:11:11 Msec=0 True Az=112.995 Ze=-171.105 Az status=0009 Ze status=0009 14:11:11 Check angles 14:11:11 SkyScan query 14:11:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:11:12 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:11:12 Message to Master queued w/err=0: serial=145031 error=0 14:11:17 Received message from Master: op=Filter serial=145032 14:11:17 Color wheel filter change from 0 to 0 14:11:17 FLIGetFilterPos err=0 currentPosition=0 14:11:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:17 Filter is already there-color wheel unchanged 14:11:17 Received message from Master: op=Shutter serial=145033 14:11:17 Shutter LASER open 14:11:17 Received message from Camera: op=State serial=145035 14:11:17 GetSingleValue result=40 Value=cccccccc 14:11:17 SkyScan query 14:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:11:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:17 Parameters OK 14:11:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:17 Set A/D data flow result=40 14:11:17 Set A/D channel type result=40 14:11:17 Set A/D encoding result=40 14:11:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:17 Set channel filter=0.000000e+000 result=40 14:11:17 Config A/D Result=40 14:11:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:17 Get A/D filter: -9.255963e+061 result=40 14:11:17 Get A/D value=-858993460 result=40 14:11:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:17 Parameters OK 14:11:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:17 Set A/D data flow result=40 14:11:17 Set A/D channel type result=40 14:11:17 Set A/D encoding result=40 14:11:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:17 Set channel filter=0.000000e+000 result=40 14:11:17 Config A/D Result=40 14:11:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:17 Get A/D filter: -9.255963e+061 result=40 14:11:17 Get A/D value=-858993460 result=40 14:11:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:17 Aux= 14:11:17 Message to Camera, serial 145035 queued 14:11:26 Received message from Master: op=Shutter serial=145045 14:11:26 Shutter LASER close 14:11:26 Received message from Master: op=PointingHead serial=145049 14:11:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:11:26 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:11:27 Point started: ret=0 14:11:27 point_skyscan result=0 14:11:28 Check angles 14:11:28 SkyScan query 14:11:28 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.025<-21535 Statuses=0009 0009 14:11:28 Msec=0 True Az=136.17 Ze=-143.025 Az status=0009 Ze status=0009 14:11:28 Check angles 14:11:28 SkyScan query 14:11:29 SkyScan query done: ret=0 az=153.75<-10250 ze=-122.025<-20135 Statuses=0009 0009 14:11:29 Msec=750 True Az=153.75 Ze=-122.025 Az status=0009 Ze status=0009 14:11:29 Check angles 14:11:29 SkyScan query 14:11:30 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.575<-18705 Statuses=0009 0009 14:11:30 Msec=1500 True Az=171.525 Ze=-100.575 Az status=0009 Ze status=0009 14:11:30 Check angles 14:11:30 SkyScan query 14:11:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.2<-17280 Statuses=0008 0009 14:11:30 Msec=2250 True Az=176.01 Ze=-79.2 Az status=0008 Ze status=0009 14:11:31 Check angles 14:11:31 SkyScan query 14:11:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-57.885<-15859 Statuses=0008 0009 14:11:31 Msec=3000 True Az=176.01 Ze=-57.885 Az status=0008 Ze status=0009 14:11:31 Check angles 14:11:31 SkyScan query 14:11:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:11:32 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:11:32 Message to Master queued w/err=0: serial=145049 error=0 14:11:37 Received message from Master: op=Filter serial=145050 14:11:37 Color wheel filter change from 0 to 0 14:11:37 FLIGetFilterPos err=0 currentPosition=0 14:11:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:37 Filter is already there-color wheel unchanged 14:11:37 Received message from Master: op=Shutter serial=145051 14:11:37 Shutter LASER close 14:11:37 Received message from Camera: op=State serial=145053 14:11:37 GetSingleValue result=40 Value=cccccccc 14:11:37 SkyScan query 14:11:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:11:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:38 Parameters OK 14:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:38 Set A/D data flow result=40 14:11:38 Set A/D channel type result=40 14:11:38 Set A/D encoding result=40 14:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:38 Set channel filter=0.000000e+000 result=40 14:11:38 Config A/D Result=40 14:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:38 Get A/D filter: -9.255963e+061 result=40 14:11:38 Get A/D value=-858993460 result=40 14:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:38 Parameters OK 14:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:38 Set A/D data flow result=40 14:11:38 Set A/D channel type result=40 14:11:38 Set A/D encoding result=40 14:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:38 Set channel filter=0.000000e+000 result=40 14:11:38 Config A/D Result=40 14:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:38 Get A/D filter: -9.255963e+061 result=40 14:11:38 Get A/D value=-858993460 result=40 14:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:38 Aux= 14:11:38 Message to Camera, serial 145053 queued 14:12:15 Received message from Master: op=PointingHead serial=145066 14:12:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:12:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:12:15 Point started: ret=0 14:12:15 point_skyscan result=0 14:12:16 Check angles 14:12:16 SkyScan query 14:12:16 SkyScan query done: ret=0 az=153.21<-10214 ze=-21.975<-13465 Statuses=0009 0009 14:12:16 Msec=0 True Az=153.21 Ze=-21.975 Az status=0009 Ze status=0009 14:12:17 Check angles 14:12:17 SkyScan query 14:12:17 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.96<-12064 Statuses=0009 0009 14:12:17 Msec=750 True Az=135.735 Ze=-0.96 Az status=0009 Ze status=0009 14:12:17 Check angles 14:12:17 SkyScan query 14:12:18 SkyScan query done: ret=0 az=118.23<-7882 ze=19.95<-10670 Statuses=0009 0009 14:12:18 Msec=1500 True Az=118.23 Ze=19.95 Az status=0009 Ze status=0009 14:12:18 Check angles 14:12:18 SkyScan query 14:12:19 SkyScan query done: ret=0 az=100.83<-6722 ze=40.95<-9270 Statuses=0009 0009 14:12:19 Msec=2250 True Az=100.83 Ze=40.95 Az status=0009 Ze status=0009 14:12:19 Check angles 14:12:19 SkyScan query 14:12:19 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 14:12:19 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 14:12:20 Check angles 14:12:20 SkyScan query 14:12:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:12:20 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 14:12:20 Message to Master queued w/err=0: serial=145066 error=0 14:12:25 Received message from Master: op=Filter serial=145067 14:12:25 Color wheel filter change from 0 to 0 14:12:25 FLIGetFilterPos err=0 currentPosition=0 14:12:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:25 Filter is already there-color wheel unchanged 14:12:25 Received message from Master: op=Shutter serial=145068 14:12:25 Shutter LASER close 14:12:25 Received message from Camera: op=State serial=145070 14:12:25 GetSingleValue result=40 Value=cccccccc 14:12:25 SkyScan query 14:12:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 14:12:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:26 Parameters OK 14:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:26 Set A/D data flow result=40 14:12:26 Set A/D channel type result=40 14:12:26 Set A/D encoding result=40 14:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:26 Set channel filter=0.000000e+000 result=40 14:12:26 Config A/D Result=40 14:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:26 Get A/D filter: -9.255963e+061 result=40 14:12:26 Get A/D value=-858993460 result=40 14:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:26 Parameters OK 14:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:26 Set A/D data flow result=40 14:12:26 Set A/D channel type result=40 14:12:26 Set A/D encoding result=40 14:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:26 Set channel filter=0.000000e+000 result=40 14:12:26 Config A/D Result=40 14:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:26 Get A/D filter: -9.255963e+061 result=40 14:12:26 Get A/D value=-858993460 result=40 14:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:26 Aux= 14:12:26 Message to Camera, serial 145070 queued 14:13:03 Received message from Master: op=PointingHead serial=145083 14:13:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:13:03 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:13:03 Point started: ret=0 14:13:03 point_skyscan result=0 14:13:04 Check angles 14:13:04 SkyScan query 14:13:04 SkyScan query done: ret=0 az=109.425<-7295 ze=38.49<-9434 Statuses=0009 0008 14:13:04 Msec=0 True Az=109.425 Ze=38.49 Az status=0009 Ze status=0008 14:13:05 Check angles 14:13:05 SkyScan query 14:13:05 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 14:13:05 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 14:13:05 Check angles 14:13:05 SkyScan query 14:13:06 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 14:13:06 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 14:13:06 Check angles 14:13:06 SkyScan query 14:13:07 SkyScan query done: ret=0 az=162.255<-10817 ze=38.505<-9433 Statuses=0009 0008 14:13:07 Msec=2250 True Az=162.255 Ze=38.505 Az status=0009 Ze status=0008 14:13:07 Check angles 14:13:07 SkyScan query 14:13:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 14:13:07 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 14:13:08 Check angles 14:13:08 SkyScan query 14:13:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:13:08 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:13:08 Message to Master queued w/err=0: serial=145083 error=0 14:13:13 Received message from Master: op=Filter serial=145084 14:13:13 Color wheel filter change from 0 to 0 14:13:13 FLIGetFilterPos err=0 currentPosition=0 14:13:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:13 Filter is already there-color wheel unchanged 14:13:13 Received message from Master: op=Shutter serial=145085 14:13:13 Shutter LASER close 14:13:13 Received message from Camera: op=State serial=145087 14:13:13 GetSingleValue result=40 Value=cccccccc 14:13:13 SkyScan query 14:13:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:13:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:14 Parameters OK 14:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:14 Set A/D data flow result=40 14:13:14 Set A/D channel type result=40 14:13:14 Set A/D encoding result=40 14:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:14 Set channel filter=0.000000e+000 result=40 14:13:14 Config A/D Result=40 14:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:14 Get A/D filter: -9.255963e+061 result=40 14:13:14 Get A/D value=-858993460 result=40 14:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:14 Parameters OK 14:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:14 Set A/D data flow result=40 14:13:14 Set A/D channel type result=40 14:13:14 Set A/D encoding result=40 14:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:14 Set channel filter=0.000000e+000 result=40 14:13:14 Config A/D Result=40 14:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:14 Get A/D filter: -9.255963e+061 result=40 14:13:14 Get A/D value=-858993460 result=40 14:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:14 Aux= 14:13:14 Message to Camera, serial 145087 queued 14:13:51 Received message from Master: op=PointingHead serial=145100 14:13:51 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:13:51 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:13:51 Point started: ret=0 14:13:51 point_skyscan result=0 14:13:52 Check angles 14:13:52 SkyScan query 14:13:53 SkyScan query done: ret=0 az=153.135<-10209 ze=8.88<-11408 Statuses=0009 0009 14:13:53 Msec=0 True Az=153.135 Ze=8.88 Az status=0009 Ze status=0009 14:13:53 Check angles 14:13:53 SkyScan query 14:13:53 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.105<-12807 Statuses=0009 0009 14:13:53 Msec=750 True Az=135.705 Ze=-12.105 Az status=0009 Ze status=0009 14:13:53 Check angles 14:13:53 SkyScan query 14:13:54 SkyScan query done: ret=0 az=118.215<-7881 ze=-33.03<-14202 Statuses=0009 0009 14:13:54 Msec=1500 True Az=118.215 Ze=-33.03 Az status=0009 Ze status=0009 14:13:54 Check angles 14:13:54 SkyScan query 14:13:55 SkyScan query done: ret=0 az=100.785<-6719 ze=-51.51<-15434 Statuses=0009 0009 14:13:55 Msec=2250 True Az=100.785 Ze=-51.51 Az status=0009 Ze status=0009 14:13:55 Check angles 14:13:55 SkyScan query 14:13:56 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:13:56 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:13:56 Check angles 14:13:56 SkyScan query 14:13:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:13:56 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:13:56 Message to Master queued w/err=0: serial=145100 error=0 14:14:01 Received message from Master: op=Filter serial=145101 14:14:01 Color wheel filter change from 0 to 0 14:14:01 FLIGetFilterPos err=0 currentPosition=0 14:14:01 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:01 Filter is already there-color wheel unchanged 14:14:01 Received message from Master: op=Shutter serial=145102 14:14:01 Shutter LASER close 14:14:01 Received message from Camera: op=State serial=145104 14:14:01 GetSingleValue result=40 Value=cccccccc 14:14:01 SkyScan query 14:14:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:14:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:02 Parameters OK 14:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:02 Set A/D data flow result=40 14:14:02 Set A/D channel type result=40 14:14:02 Set A/D encoding result=40 14:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:02 Set channel filter=0.000000e+000 result=40 14:14:02 Config A/D Result=40 14:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:02 Get A/D filter: -9.255963e+061 result=40 14:14:02 Get A/D value=-858993460 result=40 14:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:02 Parameters OK 14:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:02 Set A/D data flow result=40 14:14:02 Set A/D channel type result=40 14:14:02 Set A/D encoding result=40 14:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:02 Set channel filter=0.000000e+000 result=40 14:14:02 Config A/D Result=40 14:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:02 Get A/D filter: -9.255963e+061 result=40 14:14:02 Get A/D value=-858993460 result=40 14:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:02 Aux= 14:14:02 Message to Camera, serial 145104 queued 14:14:39 Received message from Master: op=PointingHead serial=145117 14:14:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:14:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:14:39 Point started: ret=0 14:14:39 point_skyscan result=0 14:14:40 Check angles 14:14:40 SkyScan query 14:14:41 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.135<-17409 Statuses=0009 0009 14:14:41 Msec=0 True Az=108.9 Ze=-81.135 Az status=0009 Ze status=0009 14:14:41 Check angles 14:14:41 SkyScan query 14:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 14:14:41 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 14:14:42 Check angles 14:14:42 SkyScan query 14:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.045<-20203 Statuses=0008 0009 14:14:42 Msec=1500 True Az=112.995 Ze=-123.045 Az status=0008 Ze status=0009 14:14:42 Check angles 14:14:42 SkyScan query 14:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.03<-21602 Statuses=0008 0009 14:14:43 Msec=2250 True Az=112.995 Ze=-144.03 Az status=0008 Ze status=0009 14:14:43 Check angles 14:14:43 SkyScan query 14:14:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.97<-22998 Statuses=0008 0009 14:14:44 Msec=3000 True Az=112.995 Ze=-164.97 Az status=0008 Ze status=0009 14:14:44 Check angles 14:14:44 SkyScan query 14:14:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:14:44 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:14:44 Message to Master queued w/err=0: serial=145117 error=0 14:14:49 Received message from Master: op=Filter serial=145118 14:14:49 Color wheel filter change from 0 to 0 14:14:49 FLIGetFilterPos err=0 currentPosition=0 14:14:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:49 Filter is already there-color wheel unchanged 14:14:50 Received message from Master: op=Shutter serial=145119 14:14:50 Shutter LASER open 14:14:50 Received message from Camera: op=State serial=145121 14:14:50 GetSingleValue result=40 Value=cccccccc 14:14:50 SkyScan query 14:14:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:14:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:50 Parameters OK 14:14:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:50 Set A/D data flow result=40 14:14:50 Set A/D channel type result=40 14:14:50 Set A/D encoding result=40 14:14:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:50 Set channel filter=0.000000e+000 result=40 14:14:50 Config A/D Result=40 14:14:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:50 Get A/D filter: -9.255963e+061 result=40 14:14:50 Get A/D value=-858993460 result=40 14:14:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:50 Parameters OK 14:14:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:50 Set A/D data flow result=40 14:14:50 Set A/D channel type result=40 14:14:50 Set A/D encoding result=40 14:14:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:50 Set channel filter=0.000000e+000 result=40 14:14:50 Config A/D Result=40 14:14:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:50 Get A/D filter: -9.255963e+061 result=40 14:14:50 Get A/D value=-858993460 result=40 14:14:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:50 Aux= 14:14:50 Message to Camera, serial 145121 queued 14:14:59 Received message from Master: op=Shutter serial=145131 14:14:59 Shutter LASER close 14:14:59 Received message from Master: op=PointingHead serial=145135 14:14:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:14:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:15:00 Point started: ret=0 14:15:00 point_skyscan result=0 14:15:00 Check angles 14:15:00 SkyScan query 14:15:01 SkyScan query done: ret=0 az=89.985<-5999 ze=157.32<-1512 Statuses=0009 0009 14:15:01 Msec=0 True Az=89.985 Ze=157.32 Az status=0009 Ze status=0009 14:15:01 Check angles 14:15:01 SkyScan query 14:15:02 SkyScan query done: ret=0 az=72.03<-4802 ze=135.915<-2939 Statuses=0009 0009 14:15:02 Msec=750 True Az=72.03 Ze=135.915 Az status=0009 Ze status=0009 14:15:02 Check angles 14:15:02 SkyScan query 14:15:02 SkyScan query done: ret=0 az=54.675<-3645 ze=114.93<-4338 Statuses=0009 0009 14:15:02 Msec=1500 True Az=54.675 Ze=114.93 Az status=0009 Ze status=0009 14:15:03 Check angles 14:15:03 SkyScan query 14:15:03 SkyScan query done: ret=0 az=40.995<-2733 ze=93.57<-5762 Statuses=0009 0009 14:15:03 Msec=2250 True Az=40.995 Ze=93.57 Az status=0009 Ze status=0009 14:15:03 Check angles 14:15:03 SkyScan query 14:15:04 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 14:15:04 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 14:15:04 Check angles 14:15:04 SkyScan query 14:15:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 14:15:05 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 14:15:05 Check angles 14:15:05 SkyScan query 14:15:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:15:05 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:15:05 Message to Master queued w/err=0: serial=145135 error=0 14:15:10 Received message from Master: op=Filter serial=145136 14:15:10 Color wheel filter change from 0 to 0 14:15:10 FLIGetFilterPos err=0 currentPosition=0 14:15:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:10 Filter is already there-color wheel unchanged 14:15:11 Received message from Master: op=Shutter serial=145137 14:15:11 Shutter LASER close 14:15:11 Received message from Camera: op=State serial=145139 14:15:11 GetSingleValue result=40 Value=cccccccc 14:15:11 SkyScan query 14:15:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:15:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:11 Parameters OK 14:15:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:11 Set A/D data flow result=40 14:15:11 Set A/D channel type result=40 14:15:11 Set A/D encoding result=40 14:15:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:11 Set channel filter=0.000000e+000 result=40 14:15:11 Config A/D Result=40 14:15:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:11 Get A/D filter: -9.255963e+061 result=40 14:15:11 Get A/D value=-858993460 result=40 14:15:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:11 Parameters OK 14:15:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:11 Set A/D data flow result=40 14:15:11 Set A/D channel type result=40 14:15:11 Set A/D encoding result=40 14:15:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:11 Set channel filter=0.000000e+000 result=40 14:15:11 Config A/D Result=40 14:15:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:11 Get A/D filter: -9.255963e+061 result=40 14:15:11 Get A/D value=-858993460 result=40 14:15:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:11 Aux= 14:15:11 Message to Camera, serial 145139 queued 14:15:27 Received message from Master: op=Identify serial=145140 14:15:48 Received message from Master: op=PointingHead serial=145155 14:15:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:15:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:15:49 Point started: ret=0 14:15:49 point_skyscan result=0 14:15:49 Check angles 14:15:49 SkyScan query 14:15:50 SkyScan query done: ret=0 az=63.795<-4253 ze=66.54<-7564 Statuses=0009 0008 14:15:50 Msec=0 True Az=63.795 Ze=66.54 Az status=0009 Ze status=0008 14:15:50 Check angles 14:15:50 SkyScan query 14:15:51 SkyScan query done: ret=0 az=81.675<-5445 ze=66.51<-7566 Statuses=0009 0008 14:15:51 Msec=750 True Az=81.675 Ze=66.51 Az status=0009 Ze status=0008 14:15:51 Check angles 14:15:51 SkyScan query 14:15:51 SkyScan query done: ret=0 az=99.24<-6616 ze=66.495<-7567 Statuses=0009 0008 14:15:51 Msec=1500 True Az=99.24 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-14 14:15:52] 14:15:52 Check angles 14:15:52 SkyScan query 14:15:52 SkyScan query done: ret=0 az=118.38<-7892 ze=66.495<-7567 Statuses=0009 0008 14:15:52 Msec=2250 True Az=118.38 Ze=66.495 Az status=0009 Ze status=0008 14:15:52 Check angles 14:15:52 SkyScan query 14:15:53 SkyScan query done: ret=0 az=134.085<-8939 ze=66.495<-7567 Statuses=0009 0008 14:15:53 Msec=3000 True Az=134.085 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-14 14:15:53] 14:15:53 Check angles 14:15:53 SkyScan query 14:15:54 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 14:15:54 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 14:15:54 Check angles 14:15:54 SkyScan query 14:15:54 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:15:54 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:15:54 Message to Master queued w/err=0: serial=145155 error=0 14:15:59 Received message from Master: op=Filter serial=145156 14:15:59 Color wheel filter change from 0 to 0 14:15:59 FLIGetFilterPos err=0 currentPosition=0 14:15:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:59 Filter is already there-color wheel unchanged 14:16:00 Received message from Master: op=Shutter serial=145157 14:16:00 Shutter LASER close 14:16:00 Received message from Camera: op=State serial=145159 14:16:00 GetSingleValue result=40 Value=cccccccc 14:16:00 SkyScan query 14:16:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:16:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:00 Parameters OK 14:16:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:00 Set A/D data flow result=40 14:16:00 Set A/D channel type result=40 14:16:00 Set A/D encoding result=40 14:16:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:00 Set channel filter=0.000000e+000 result=40 14:16:00 Config A/D Result=40 14:16:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:00 Get A/D filter: -9.255963e+061 result=40 14:16:00 Get A/D value=-858993460 result=40 14:16:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:00 Parameters OK 14:16:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:00 Set A/D data flow result=40 14:16:00 Set A/D channel type result=40 14:16:00 Set A/D encoding result=40 14:16:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:00 Set channel filter=0.000000e+000 result=40 14:16:00 Config A/D Result=40 14:16:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:00 Get A/D filter: -9.255963e+061 result=40 14:16:00 Get A/D value=-858993460 result=40 14:16:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:00 Aux= 14:16:00 Message to Camera, serial 145159 queued 14:16:37 Received message from Master: op=PointingHead serial=145172 14:16:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:16:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:16:37 Point started: ret=0 14:16:37 point_skyscan result=0 14:16:38 Check angles 14:16:38 SkyScan query 14:16:39 SkyScan query done: ret=0 az=134.535<-8969 ze=36.21<-9586 Statuses=0009 0009 14:16:39 Msec=0 True Az=134.535 Ze=36.21 Az status=0009 Ze status=0009 14:16:39 Check angles 14:16:39 SkyScan query 14:16:39 SkyScan query done: ret=0 az=116.76<-7784 ze=14.745<-11017 Statuses=0009 0009 14:16:39 Msec=750 True Az=116.76 Ze=14.745 Az status=0009 Ze status=0009 14:16:40 Check angles 14:16:40 SkyScan query 14:16:40 SkyScan query done: ret=0 az=99.315<-6621 ze=-6.195<-12413 Statuses=0009 0009 14:16:40 Msec=1500 True Az=99.315 Ze=-6.195 Az status=0009 Ze status=0009 14:16:40 Check angles 14:16:40 SkyScan query 14:16:41 SkyScan query done: ret=0 az=81.915<-5461 ze=-27.105<-13807 Statuses=0009 0009 14:16:41 Msec=2250 True Az=81.915 Ze=-27.105 Az status=0009 Ze status=0009 14:16:41 Check angles 14:16:41 SkyScan query 14:16:42 SkyScan query done: ret=0 az=64.35<-4290 ze=-38.595<-14573 Statuses=0009 0008 14:16:42 Msec=3000 True Az=64.35 Ze=-38.595 Az status=0009 Ze status=0008 14:16:42 Check angles 14:16:42 SkyScan query 14:16:42 SkyScan query done: ret=0 az=46.905<-3127 ze=-38.52<-14568 Statuses=0009 0008 14:16:42 Msec=3750 True Az=46.905 Ze=-38.52 Az status=0009 Ze status=0008 14:16:43 Check angles 14:16:43 SkyScan query 14:16:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:16:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:16:43 Message to Master queued w/err=0: serial=145172 error=0 14:16:48 Received message from Master: op=Filter serial=145173 14:16:48 Color wheel filter change from 0 to 0 14:16:48 FLIGetFilterPos err=0 currentPosition=0 14:16:48 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:48 Filter is already there-color wheel unchanged 14:16:48 Received message from Master: op=Shutter serial=145174 14:16:48 Shutter LASER close 14:16:48 Received message from Camera: op=State serial=145176 14:16:48 GetSingleValue result=40 Value=cccccccc 14:16:48 SkyScan query 14:16:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:16:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:49 Parameters OK 14:16:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:49 Set A/D data flow result=40 14:16:49 Set A/D channel type result=40 14:16:49 Set A/D encoding result=40 14:16:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:49 Set channel filter=0.000000e+000 result=40 14:16:49 Config A/D Result=40 14:16:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:49 Get A/D filter: -9.255963e+061 result=40 14:16:49 Get A/D value=-858993460 result=40 14:16:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:49 Parameters OK 14:16:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:49 Set A/D data flow result=40 14:16:49 Set A/D channel type result=40 14:16:49 Set A/D encoding result=40 14:16:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:49 Set channel filter=0.000000e+000 result=40 14:16:49 Config A/D Result=40 14:16:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:49 Get A/D filter: -9.255963e+061 result=40 14:16:49 Get A/D value=-858993460 result=40 14:16:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:49 Aux= 14:16:49 Message to Camera, serial 145176 queued 14:17:26 Received message from Master: op=PointingHead serial=145189 14:17:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:17:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:17:26 Point started: ret=0 14:17:26 point_skyscan result=0 14:17:27 Check angles 14:17:27 SkyScan query 14:17:27 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.775<-16585 Statuses=0009 0009 14:17:27 Msec=0 True Az=64.29 Ze=-68.775 Az status=0009 Ze status=0009 14:17:28 Check angles 14:17:28 SkyScan query 14:17:28 SkyScan query done: ret=0 az=81.825<-5455 ze=-89.715<-17981 Statuses=0009 0009 14:17:28 Msec=750 True Az=81.825 Ze=-89.715 Az status=0009 Ze status=0009 14:17:28 Check angles 14:17:28 SkyScan query 14:17:29 SkyScan query done: ret=0 az=99.33<-6622 ze=-110.715<-19381 Statuses=0009 0009 14:17:29 Msec=1500 True Az=99.33 Ze=-110.715 Az status=0009 Ze status=0009 14:17:29 Check angles 14:17:29 SkyScan query 14:17:30 SkyScan query done: ret=0 az=117.18<-7812 ze=-132.015<-20801 Statuses=0009 0009 14:17:30 Msec=2250 True Az=117.18 Ze=-132.015 Az status=0009 Ze status=0009 14:17:30 Check angles 14:17:30 SkyScan query 14:17:31 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 14:17:31 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 14:17:31 Check angles 14:17:31 SkyScan query 14:17:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 14:17:31 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 14:17:31 Message to Master queued w/err=0: serial=145189 error=0 14:17:36 Received message from Master: op=Filter serial=145190 14:17:36 Color wheel filter change from 0 to 0 14:17:36 FLIGetFilterPos err=0 currentPosition=0 14:17:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:36 Filter is already there-color wheel unchanged 14:17:36 Received message from Master: op=Shutter serial=145191 14:17:36 Shutter LASER close 14:17:36 Received message from Camera: op=State serial=145193 14:17:36 GetSingleValue result=40 Value=cccccccc 14:17:36 SkyScan query 14:17:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:17:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:37 Parameters OK 14:17:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:37 Set A/D data flow result=40 14:17:37 Set A/D channel type result=40 14:17:37 Set A/D encoding result=40 14:17:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:37 Set channel filter=0.000000e+000 result=40 14:17:37 Config A/D Result=40 14:17:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:37 Get A/D filter: -9.255963e+061 result=40 14:17:37 Get A/D value=-858993460 result=40 14:17:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:37 Parameters OK 14:17:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:37 Set A/D data flow result=40 14:17:37 Set A/D channel type result=40 14:17:37 Set A/D encoding result=40 14:17:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:37 Set channel filter=0.000000e+000 result=40 14:17:37 Config A/D Result=40 14:17:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:37 Get A/D filter: -9.255963e+061 result=40 14:17:37 Get A/D value=-858993460 result=40 14:17:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:37 Aux= 14:17:37 Message to Camera, serial 145193 queued 14:18:14 Received message from Master: op=PointingHead serial=145206 14:18:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:18:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:18:14 Point started: ret=0 14:18:14 point_skyscan result=0 14:18:15 Check angles 14:18:15 SkyScan query 14:18:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 14:18:16 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 14:18:16 Check angles 14:18:16 SkyScan query 14:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:18:16 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:18:16 Message to Master queued w/err=0: serial=145206 error=0 14:18:21 Received message from Master: op=Filter serial=145207 14:18:21 Color wheel filter change from 0 to 0 14:18:21 FLIGetFilterPos err=0 currentPosition=0 14:18:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:21 Filter is already there-color wheel unchanged 14:18:22 Received message from Master: op=Shutter serial=145208 14:18:22 Shutter LASER open 14:18:22 Received message from Camera: op=State serial=145210 14:18:22 GetSingleValue result=40 Value=cccccccc 14:18:22 SkyScan query 14:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.98<-23532 Statuses=0008 0008 14:18:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:22 Parameters OK 14:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:22 Set A/D data flow result=40 14:18:22 Set A/D channel type result=40 14:18:22 Set A/D encoding result=40 14:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:22 Set channel filter=0.000000e+000 result=40 14:18:22 Config A/D Result=40 14:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:22 Get A/D filter: -9.255963e+061 result=40 14:18:22 Get A/D value=-858993460 result=40 14:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:22 Parameters OK 14:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:22 Set A/D data flow result=40 14:18:22 Set A/D channel type result=40 14:18:22 Set A/D encoding result=40 14:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:22 Set channel filter=0.000000e+000 result=40 14:18:22 Config A/D Result=40 14:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:22 Get A/D filter: -9.255963e+061 result=40 14:18:22 Get A/D value=-858993460 result=40 14:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.979996 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:22 Aux= 14:18:22 Message to Camera, serial 145210 queued 14:18:31 Received message from Master: op=Shutter serial=145220 14:18:31 Shutter LASER close 14:18:31 Received message from Master: op=PointingHead serial=145224 14:18:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:18:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:18:32 Point started: ret=0 14:18:32 point_skyscan result=0 14:18:32 Check angles 14:18:32 SkyScan query 14:18:33 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.52<-21568 Statuses=0009 0009 14:18:33 Msec=0 True Az=135.765 Ze=-143.52 Az status=0009 Ze status=0009 14:18:33 Check angles 14:18:33 SkyScan query 14:18:34 SkyScan query done: ret=0 az=153.345<-10223 ze=-122.55<-20170 Statuses=0009 0009 14:18:34 Msec=750 True Az=153.345 Ze=-122.55 Az status=0009 Ze status=0009 14:18:34 Check angles 14:18:34 SkyScan query 14:18:35 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.655<-18777 Statuses=0009 0009 14:18:35 Msec=1500 True Az=170.775 Ze=-101.655 Az status=0009 Ze status=0009 14:18:35 Check angles 14:18:35 SkyScan query 14:18:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.64<-17376 Statuses=0008 0009 14:18:35 Msec=2250 True Az=176.01 Ze=-80.64 Az status=0008 Ze status=0009 14:18:35 Check angles 14:18:35 SkyScan query 14:18:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.7<-15980 Statuses=0008 0009 14:18:36 Msec=3000 True Az=176.01 Ze=-59.7 Az status=0008 Ze status=0009 14:18:36 Check angles 14:18:36 SkyScan query 14:18:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:18:37 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:18:37 Message to Master queued w/err=0: serial=145224 error=0 14:18:42 Received message from Master: op=Filter serial=145225 14:18:42 Color wheel filter change from 0 to 0 14:18:42 FLIGetFilterPos err=0 currentPosition=0 14:18:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:42 Filter is already there-color wheel unchanged 14:18:42 Received message from Master: op=Shutter serial=145226 14:18:42 Shutter LASER close 14:18:42 Received message from Camera: op=State serial=145228 14:18:42 GetSingleValue result=40 Value=cccccccc 14:18:42 SkyScan query 14:18:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:18:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:43 Parameters OK 14:18:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:43 Set A/D data flow result=40 14:18:43 Set A/D channel type result=40 14:18:43 Set A/D encoding result=40 14:18:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:43 Set channel filter=0.000000e+000 result=40 14:18:43 Config A/D Result=40 14:18:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:43 Get A/D filter: -9.255963e+061 result=40 14:18:43 Get A/D value=-858993460 result=40 14:18:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:43 Parameters OK 14:18:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:43 Set A/D data flow result=40 14:18:43 Set A/D channel type result=40 14:18:43 Set A/D encoding result=40 14:18:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:43 Set channel filter=0.000000e+000 result=40 14:18:43 Config A/D Result=40 14:18:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:43 Get A/D filter: -9.255963e+061 result=40 14:18:43 Get A/D value=-858993460 result=40 14:18:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:43 Aux= 14:18:43 Message to Camera, serial 145228 queued 14:19:19 Received message from Master: op=PointingHead serial=145240 14:19:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:19:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:19:19 Point started: ret=0 14:19:19 point_skyscan result=0 14:19:20 Check angles 14:19:20 SkyScan query 14:19:20 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.915<-13461 Statuses=0009 0009 14:19:20 Msec=0 True Az=153.09 Ze=-21.915 Az status=0009 Ze status=0009 14:19:20 Check angles 14:19:20 SkyScan query 14:19:21 SkyScan query done: ret=0 az=135.27<-9018 ze=-0.48<-12032 Statuses=0009 0009 14:19:21 Msec=750 True Az=135.27 Ze=-0.48 Az status=0009 Ze status=0009 14:19:21 Check angles 14:19:21 SkyScan query 14:19:22 SkyScan query done: ret=0 az=117.765<-7851 ze=20.46<-10636 Statuses=0009 0009 14:19:22 Msec=1500 True Az=117.765 Ze=20.46 Az status=0009 Ze status=0009 14:19:22 Check angles 14:19:22 SkyScan query 14:19:23 SkyScan query done: ret=0 az=100.245<-6683 ze=41.46<-9236 Statuses=0009 0009 14:19:23 Msec=2250 True Az=100.245 Ze=41.46 Az status=0009 Ze status=0009 14:19:23 Check angles 14:19:23 SkyScan query 14:19:23 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 14:19:23 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 14:19:23 Check angles 14:19:23 SkyScan query 14:19:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:19:24 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:19:24 Message to Master queued w/err=0: serial=145240 error=0 14:19:29 Received message from Master: op=Filter serial=145241 14:19:29 Color wheel filter change from 0 to 0 14:19:29 FLIGetFilterPos err=0 currentPosition=0 14:19:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:29 Filter is already there-color wheel unchanged 14:19:29 Received message from Master: op=Shutter serial=145242 14:19:29 Shutter LASER close 14:19:29 Received message from Camera: op=State serial=145244 14:19:29 GetSingleValue result=40 Value=cccccccc 14:19:29 SkyScan query 14:19:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:19:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:30 Parameters OK 14:19:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:30 Set A/D data flow result=40 14:19:30 Set A/D channel type result=40 14:19:30 Set A/D encoding result=40 14:19:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:30 Set channel filter=0.000000e+000 result=40 14:19:30 Config A/D Result=40 14:19:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:30 Get A/D filter: -9.255963e+061 result=40 14:19:30 Get A/D value=-858993460 result=40 14:19:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:30 Parameters OK 14:19:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:30 Set A/D data flow result=40 14:19:30 Set A/D channel type result=40 14:19:30 Set A/D encoding result=40 14:19:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:30 Set channel filter=0.000000e+000 result=40 14:19:30 Config A/D Result=40 14:19:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:30 Get A/D filter: -9.255963e+061 result=40 14:19:30 Get A/D value=-858993460 result=40 14:19:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:30 Aux= 14:19:30 Message to Camera, serial 145244 queued 14:20:07 Received message from Master: op=PointingHead serial=145257 14:20:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:20:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:20:07 Point started: ret=0 14:20:07 point_skyscan result=0 14:20:08 Check angles 14:20:08 SkyScan query 14:20:08 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 14:20:08 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 14:20:08 Check angles 14:20:08 SkyScan query 14:20:09 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 14:20:09 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 14:20:09 Check angles 14:20:09 SkyScan query 14:20:10 SkyScan query done: ret=0 az=143.805<-9587 ze=38.505<-9433 Statuses=0009 0008 14:20:10 Msec=1500 True Az=143.805 Ze=38.505 Az status=0009 Ze status=0008 14:20:10 Check angles 14:20:10 SkyScan query 14:20:11 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 14:20:11 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 14:20:11 Check angles 14:20:11 SkyScan query 14:20:11 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:20:11 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:20:12 Check angles 14:20:12 SkyScan query 14:20:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:20:12 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:20:12 Message to Master queued w/err=0: serial=145257 error=0 14:20:17 Received message from Master: op=Filter serial=145258 14:20:17 Color wheel filter change from 0 to 0 14:20:17 FLIGetFilterPos err=0 currentPosition=0 14:20:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:17 Filter is already there-color wheel unchanged 14:20:17 Received message from Master: op=Shutter serial=145259 14:20:17 Shutter LASER close 14:20:17 Received message from Camera: op=State serial=145261 14:20:17 GetSingleValue result=40 Value=cccccccc 14:20:17 SkyScan query 14:20:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:20:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:18 Parameters OK 14:20:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:18 Set A/D data flow result=40 14:20:18 Set A/D channel type result=40 14:20:18 Set A/D encoding result=40 14:20:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:18 Set channel filter=0.000000e+000 result=40 14:20:18 Config A/D Result=40 14:20:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:18 Get A/D filter: -9.255963e+061 result=40 14:20:18 Get A/D value=-858993460 result=40 14:20:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:18 Parameters OK 14:20:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:18 Set A/D data flow result=40 14:20:18 Set A/D channel type result=40 14:20:18 Set A/D encoding result=40 14:20:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:18 Set channel filter=0.000000e+000 result=40 14:20:18 Config A/D Result=40 14:20:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:18 Get A/D filter: -9.255963e+061 result=40 14:20:18 Get A/D value=-858993460 result=40 14:20:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:18 Aux= 14:20:18 Message to Camera, serial 145261 queued 14:20:55 Received message from Master: op=PointingHead serial=145274 14:20:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:20:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:20:55 Point started: ret=0 14:20:55 point_skyscan result=0 14:20:56 Check angles 14:20:56 SkyScan query 14:20:56 SkyScan query done: ret=0 az=153.09<-10206 ze=8.805<-11413 Statuses=0009 0009 14:20:56 Msec=0 True Az=153.09 Ze=8.805 Az status=0009 Ze status=0009 14:20:57 Check angles 14:20:57 SkyScan query 14:20:57 SkyScan query done: ret=0 az=135.225<-9015 ze=-12.585<-12839 Statuses=0009 0009 14:20:57 Msec=750 True Az=135.225 Ze=-12.585 Az status=0009 Ze status=0009 14:20:57 Check angles 14:20:57 SkyScan query 14:20:58 SkyScan query done: ret=0 az=117.39<-7826 ze=-34.05<-14270 Statuses=0009 0009 14:20:58 Msec=1500 True Az=117.39 Ze=-34.05 Az status=0009 Ze status=0009 14:20:58 Check angles 14:20:58 SkyScan query 14:20:59 SkyScan query done: ret=0 az=99.96<-6664 ze=-51.585<-15439 Statuses=0009 0009 14:20:59 Msec=2250 True Az=99.96 Ze=-51.585 Az status=0009 Ze status=0009 14:20:59 Check angles 14:20:59 SkyScan query 14:20:59 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 14:20:59 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 14:21:00 Check angles 14:21:00 SkyScan query 14:21:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:21:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:21:00 Message to Master queued w/err=0: serial=145274 error=0 14:21:05 Received message from Master: op=Filter serial=145275 14:21:05 Color wheel filter change from 0 to 0 14:21:05 FLIGetFilterPos err=0 currentPosition=0 14:21:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:05 Filter is already there-color wheel unchanged 14:21:05 Received message from Master: op=Shutter serial=145276 14:21:05 Shutter LASER close 14:21:05 Received message from Camera: op=State serial=145278 14:21:05 GetSingleValue result=40 Value=cccccccc 14:21:05 SkyScan query 14:21:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:21:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:06 Parameters OK 14:21:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:06 Set A/D data flow result=40 14:21:06 Set A/D channel type result=40 14:21:06 Set A/D encoding result=40 14:21:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:06 Set channel filter=0.000000e+000 result=40 14:21:06 Config A/D Result=40 14:21:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:06 Get A/D filter: -9.255963e+061 result=40 14:21:06 Get A/D value=-858993460 result=40 14:21:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:06 Parameters OK 14:21:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:06 Set A/D data flow result=40 14:21:06 Set A/D channel type result=40 14:21:06 Set A/D encoding result=40 14:21:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:06 Set channel filter=0.000000e+000 result=40 14:21:06 Config A/D Result=40 14:21:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:06 Get A/D filter: -9.255963e+061 result=40 14:21:06 Get A/D value=-858993460 result=40 14:21:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:06 Aux= 14:21:06 Message to Camera, serial 145278 queued 14:21:43 Received message from Master: op=PointingHead serial=145291 14:21:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:21:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:21:43 Point started: ret=0 14:21:43 point_skyscan result=0 14:21:44 Check angles 14:21:44 SkyScan query 14:21:44 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.165<-17411 Statuses=0009 0009 14:21:44 Msec=0 True Az=108.855 Ze=-81.165 Az status=0009 Ze status=0009 14:21:45 Check angles 14:21:45 SkyScan query 14:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.15<-18810 Statuses=0008 0009 14:21:45 Msec=750 True Az=112.995 Ze=-102.15 Az status=0008 Ze status=0009 14:21:45 Check angles 14:21:45 SkyScan query 14:21:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.09<-20206 Statuses=0008 0009 14:21:46 Msec=1500 True Az=112.995 Ze=-123.09 Az status=0008 Ze status=0009 14:21:46 Check angles 14:21:46 SkyScan query 14:21:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.045<-21603 Statuses=0008 0009 14:21:47 Msec=2250 True Az=112.995 Ze=-144.045 Az status=0008 Ze status=0009 14:21:47 Check angles 14:21:47 SkyScan query 14:21:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 14:21:47 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 14:21:48 Check angles 14:21:48 SkyScan query 14:21:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:21:48 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:21:48 Message to Master queued w/err=0: serial=145291 error=0 14:21:53 Received message from Master: op=Filter serial=145292 14:21:53 Color wheel filter change from 0 to 0 14:21:53 FLIGetFilterPos err=0 currentPosition=0 14:21:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:53 Filter is already there-color wheel unchanged 14:21:53 Received message from Master: op=Shutter serial=145293 14:21:53 Shutter LASER open 14:21:54 Received message from Camera: op=State serial=145295 14:21:54 GetSingleValue result=40 Value=cccccccc 14:21:54 SkyScan query 14:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:21:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:54 Parameters OK 14:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:54 Set A/D data flow result=40 14:21:54 Set A/D channel type result=40 14:21:54 Set A/D encoding result=40 14:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:54 Set channel filter=0.000000e+000 result=40 14:21:54 Config A/D Result=40 14:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:54 Get A/D filter: -9.255963e+061 result=40 14:21:54 Get A/D value=-858993460 result=40 14:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:54 Parameters OK 14:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:54 Set A/D data flow result=40 14:21:54 Set A/D channel type result=40 14:21:54 Set A/D encoding result=40 14:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:54 Set channel filter=0.000000e+000 result=40 14:21:54 Config A/D Result=40 14:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:54 Get A/D filter: -9.255963e+061 result=40 14:21:54 Get A/D value=-858993460 result=40 14:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:54 Aux= 14:21:54 Message to Camera, serial 145295 queued 14:22:03 Received message from Master: op=Shutter serial=145305 14:22:03 Shutter LASER close 14:22:03 Received message from Master: op=PointingHead serial=145309 14:22:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:22:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:22:03 Point started: ret=0 14:22:03 point_skyscan result=0 14:22:04 Check angles 14:22:04 SkyScan query 14:22:05 SkyScan query done: ret=0 az=89.55<-5970 ze=156.78<-1548 Statuses=0009 0009 14:22:05 Msec=0 True Az=89.55 Ze=156.78 Az status=0009 Ze status=0009 14:22:05 Check angles 14:22:05 SkyScan query 14:22:05 SkyScan query done: ret=0 az=72.015<-4801 ze=135.825<-2945 Statuses=0009 0009 14:22:05 Msec=750 True Az=72.015 Ze=135.825 Az status=0009 Ze status=0009 14:22:06 Check angles 14:22:06 SkyScan query 14:22:06 SkyScan query done: ret=0 az=54.63<-3642 ze=114.855<-4343 Statuses=0009 0009 14:22:06 Msec=1500 True Az=54.63 Ze=114.855 Az status=0009 Ze status=0009 14:22:06 Check angles 14:22:06 SkyScan query 14:22:07 SkyScan query done: ret=0 az=40.965<-2731 ze=93.9<-5740 Statuses=0009 0009 14:22:07 Msec=2250 True Az=40.965 Ze=93.9 Az status=0009 Ze status=0009 14:22:07 Check angles 14:22:07 SkyScan query 14:22:08 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 14:22:08 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 14:22:08 Check angles 14:22:08 SkyScan query 14:22:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 14:22:08 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 14:22:09 Check angles 14:22:09 SkyScan query 14:22:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:22:09 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:22:09 Message to Master queued w/err=0: serial=145309 error=0 14:22:14 Received message from Master: op=Filter serial=145310 14:22:14 Color wheel filter change from 0 to 0 14:22:14 FLIGetFilterPos err=0 currentPosition=0 14:22:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:14 Filter is already there-color wheel unchanged 14:22:14 Received message from Master: op=Shutter serial=145311 14:22:14 Shutter LASER close 14:22:15 Received message from Camera: op=State serial=145313 14:22:15 GetSingleValue result=40 Value=cccccccc 14:22:15 SkyScan query 14:22:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:22:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:15 Parameters OK 14:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:15 Set A/D data flow result=40 14:22:15 Set A/D channel type result=40 14:22:15 Set A/D encoding result=40 14:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:15 Set channel filter=0.000000e+000 result=40 14:22:15 Config A/D Result=40 14:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:15 Get A/D filter: -9.255963e+061 result=40 14:22:15 Get A/D value=-858993460 result=40 14:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:15 Parameters OK 14:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:15 Set A/D data flow result=40 14:22:15 Set A/D channel type result=40 14:22:15 Set A/D encoding result=40 14:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:15 Set channel filter=0.000000e+000 result=40 14:22:15 Config A/D Result=40 14:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:15 Get A/D filter: -9.255963e+061 result=40 14:22:15 Get A/D value=-858993460 result=40 14:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:15 Aux= 14:22:15 Message to Camera, serial 145313 queued 14:22:52 Received message from Master: op=PointingHead serial=145326 14:22:52 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:22:52 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:22:52 Point started: ret=0 14:22:52 point_skyscan result=0 14:22:53 Check angles 14:22:53 SkyScan query 14:22:54 SkyScan query done: ret=0 az=64.125<-4275 ze=66.525<-7565 Statuses=0009 0008 14:22:54 Msec=0 True Az=64.125 Ze=66.525 Az status=0009 Ze status=0008 14:22:54 Check angles 14:22:54 SkyScan query 14:22:54 SkyScan query done: ret=0 az=82.035<-5469 ze=66.51<-7566 Statuses=0009 0008 14:22:54 Msec=750 True Az=82.035 Ze=66.51 Az status=0009 Ze status=0008 14:22:55 Check angles 14:22:55 SkyScan query 14:22:55 SkyScan query done: ret=0 az=99.48<-6632 ze=66.495<-7567 Statuses=0009 0008 14:22:55 Msec=1500 True Az=99.48 Ze=66.495 Az status=0009 Ze status=0008 14:22:55 Check angles 14:22:55 SkyScan query 14:22:56 SkyScan query done: ret=0 az=116.94<-7796 ze=66.495<-7567 Statuses=0009 0008 14:22:56 Msec=2250 True Az=116.94 Ze=66.495 Az status=0009 Ze status=0008 14:22:56 Check angles 14:22:56 SkyScan query 14:22:57 SkyScan query done: ret=0 az=134.535<-8969 ze=66.495<-7567 Statuses=0009 0008 14:22:57 Msec=3000 True Az=134.535 Ze=66.495 Az status=0009 Ze status=0008 14:22:57 Check angles 14:22:57 SkyScan query 14:22:57 SkyScan query done: ret=0 az=151.875<-10125 ze=66.495<-7567 Statuses=0009 0008 14:22:57 Msec=3750 True Az=151.875 Ze=66.495 Az status=0009 Ze status=0008 14:22:58 Check angles 14:22:58 SkyScan query 14:22:58 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 14:22:58 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 14:22:58 Message to Master queued w/err=0: serial=145326 error=0 14:23:03 Received message from Master: op=Filter serial=145327 14:23:03 Color wheel filter change from 0 to 0 14:23:03 FLIGetFilterPos err=0 currentPosition=0 14:23:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:03 Filter is already there-color wheel unchanged 14:23:03 Received message from Master: op=Shutter serial=145328 14:23:03 Shutter LASER close 14:23:03 Received message from Camera: op=State serial=145330 14:23:03 GetSingleValue result=40 Value=cccccccc 14:23:03 SkyScan query 14:23:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:23:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:04 Parameters OK 14:23:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:04 Set A/D data flow result=40 14:23:04 Set A/D channel type result=40 14:23:04 Set A/D encoding result=40 14:23:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:04 Set channel filter=0.000000e+000 result=40 14:23:04 Config A/D Result=40 14:23:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:04 Get A/D filter: -9.255963e+061 result=40 14:23:04 Get A/D value=-858993460 result=40 14:23:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:04 Parameters OK 14:23:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:04 Set A/D data flow result=40 14:23:04 Set A/D channel type result=40 14:23:04 Set A/D encoding result=40 14:23:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:04 Set channel filter=0.000000e+000 result=40 14:23:04 Config A/D Result=40 14:23:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:04 Get A/D filter: -9.255963e+061 result=40 14:23:04 Get A/D value=-858993460 result=40 14:23:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:04 Aux= 14:23:04 Message to Camera, serial 145330 queued 14:23:41 Received message from Master: op=PointingHead serial=145343 14:23:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:23:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:23:41 Point started: ret=0 14:23:41 point_skyscan result=0 14:23:42 Check angles 14:23:42 SkyScan query 14:23:42 SkyScan query done: ret=0 az=134.73<-8982 ze=36.45<-9570 Statuses=0009 0009 14:23:42 Msec=0 True Az=134.73 Ze=36.45 Az status=0009 Ze status=0009 14:23:43 Check angles 14:23:43 SkyScan query 14:23:43 SkyScan query done: ret=0 az=117.285<-7819 ze=15.555<-10963 Statuses=0009 0009 14:23:43 Msec=750 True Az=117.285 Ze=15.555 Az status=0009 Ze status=0009 14:23:43 Check angles 14:23:43 SkyScan query 14:23:44 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.475<-12365 Statuses=0009 0009 14:23:44 Msec=1500 True Az=99.855 Ze=-5.475 Az status=0009 Ze status=0009 14:23:44 Check angles 14:23:44 SkyScan query 14:23:45 SkyScan query done: ret=0 az=82.425<-5495 ze=-26.445<-13763 Statuses=0009 0009 14:23:45 Msec=2250 True Az=82.425 Ze=-26.445 Az status=0009 Ze status=0009 14:23:45 Check angles 14:23:45 SkyScan query 14:23:45 SkyScan query done: ret=0 az=64.83<-4322 ze=-38.595<-14573 Statuses=0009 0008 14:23:45 Msec=3000 True Az=64.83 Ze=-38.595 Az status=0009 Ze status=0008 14:23:46 Check angles 14:23:46 SkyScan query 14:23:46 SkyScan query done: ret=0 az=47.04<-3136 ze=-38.52<-14568 Statuses=0009 0008 14:23:46 Msec=3750 True Az=47.04 Ze=-38.52 Az status=0009 Ze status=0008 14:23:46 Check angles 14:23:46 SkyScan query 14:23:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:23:47 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:23:47 Message to Master queued w/err=0: serial=145343 error=0 14:23:52 Received message from Master: op=Filter serial=145344 14:23:52 Color wheel filter change from 0 to 0 14:23:52 FLIGetFilterPos err=0 currentPosition=0 14:23:52 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:52 Filter is already there-color wheel unchanged 14:23:52 Received message from Master: op=Shutter serial=145345 14:23:52 Shutter LASER close 14:23:52 Received message from Camera: op=State serial=145347 14:23:52 GetSingleValue result=40 Value=cccccccc 14:23:52 SkyScan query 14:23:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:23:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:53 Parameters OK 14:23:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:53 Set A/D data flow result=40 14:23:53 Set A/D channel type result=40 14:23:53 Set A/D encoding result=40 14:23:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:53 Set channel filter=0.000000e+000 result=40 14:23:53 Config A/D Result=40 14:23:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:53 Get A/D filter: -9.255963e+061 result=40 14:23:53 Get A/D value=-858993460 result=40 14:23:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:53 Parameters OK 14:23:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:53 Set A/D data flow result=40 14:23:53 Set A/D channel type result=40 14:23:53 Set A/D encoding result=40 14:23:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:53 Set channel filter=0.000000e+000 result=40 14:23:53 Config A/D Result=40 14:23:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:53 Get A/D filter: -9.255963e+061 result=40 14:23:53 Get A/D value=-858993460 result=40 14:23:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:53 Aux= 14:23:53 Message to Camera, serial 145347 queued 14:24:29 Received message from Master: op=PointingHead serial=145359 14:24:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:24:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:24:29 Point started: ret=0 14:24:29 point_skyscan result=0 14:24:30 Check angles 14:24:30 SkyScan query 14:24:30 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.445<-16563 Statuses=0009 0009 14:24:30 Msec=0 True Az=64.08 Ze=-68.445 Az status=0009 Ze status=0009 14:24:31 Check angles 14:24:31 SkyScan query 14:24:31 SkyScan query done: ret=0 az=82.005<-5467 ze=-89.805<-17987 Statuses=0009 0009 14:24:31 Msec=750 True Az=82.005 Ze=-89.805 Az status=0009 Ze status=0009 14:24:31 Check angles 14:24:31 SkyScan query 14:24:32 SkyScan query done: ret=0 az=99.705<-6647 ze=-111.165<-19411 Statuses=0009 0009 14:24:32 Msec=1500 True Az=99.705 Ze=-111.165 Az status=0009 Ze status=0009 14:24:32 Check angles 14:24:32 SkyScan query 14:24:33 SkyScan query done: ret=0 az=117.27<-7818 ze=-132.12<-20808 Statuses=0009 0009 14:24:33 Msec=2250 True Az=117.27 Ze=-132.12 Az status=0009 Ze status=0009 14:24:33 Check angles 14:24:33 SkyScan query 14:24:33 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 14:24:33 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 14:24:34 Check angles 14:24:34 SkyScan query 14:24:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 14:24:34 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 14:24:34 Message to Master queued w/err=0: serial=145359 error=0 14:24:39 Received message from Master: op=Filter serial=145360 14:24:39 Color wheel filter change from 0 to 0 14:24:39 FLIGetFilterPos err=0 currentPosition=0 14:24:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:39 Filter is already there-color wheel unchanged 14:24:39 Received message from Master: op=Shutter serial=145361 14:24:39 Shutter LASER close 14:24:39 Received message from Camera: op=State serial=145363 14:24:39 GetSingleValue result=40 Value=cccccccc 14:24:39 SkyScan query 14:24:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:24:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:40 Parameters OK 14:24:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:40 Set A/D data flow result=40 14:24:40 Set A/D channel type result=40 14:24:40 Set A/D encoding result=40 14:24:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:40 Set channel filter=0.000000e+000 result=40 14:24:40 Config A/D Result=40 14:24:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:40 Get A/D filter: -9.255963e+061 result=40 14:24:40 Get A/D value=-858993460 result=40 14:24:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:40 Parameters OK 14:24:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:40 Set A/D data flow result=40 14:24:40 Set A/D channel type result=40 14:24:40 Set A/D encoding result=40 14:24:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:40 Set channel filter=0.000000e+000 result=40 14:24:40 Config A/D Result=40 14:24:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:40 Get A/D filter: -9.255963e+061 result=40 14:24:40 Get A/D value=-858993460 result=40 14:24:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:40 Aux= 14:24:40 Message to Camera, serial 145363 queued 14:25:17 Received message from Master: op=PointingHead serial=145376 14:25:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:25:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:25:17 Point started: ret=0 14:25:17 point_skyscan result=0 14:25:18 Check angles 14:25:18 SkyScan query 14:25:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 14:25:18 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 14:25:19 Check angles 14:25:19 SkyScan query 14:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:25:19 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:25:19 Message to Master queued w/err=0: serial=145376 error=0 14:25:24 Received message from Master: op=Filter serial=145377 14:25:24 Color wheel filter change from 0 to 0 14:25:24 FLIGetFilterPos err=0 currentPosition=0 14:25:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:24 Filter is already there-color wheel unchanged 14:25:24 Received message from Master: op=Shutter serial=145378 14:25:24 Shutter LASER open 14:25:25 Received message from Camera: op=State serial=145380 14:25:25 GetSingleValue result=40 Value=cccccccc 14:25:25 SkyScan query 14:25:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:25:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:25 Parameters OK 14:25:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:25 Set A/D data flow result=40 14:25:25 Set A/D channel type result=40 14:25:25 Set A/D encoding result=40 14:25:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:25 Set channel filter=0.000000e+000 result=40 14:25:25 Config A/D Result=40 14:25:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:25 Get A/D filter: -9.255963e+061 result=40 14:25:25 Get A/D value=-858993460 result=40 14:25:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:25 Parameters OK 14:25:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:25 Set A/D data flow result=40 14:25:25 Set A/D channel type result=40 14:25:25 Set A/D encoding result=40 14:25:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:25 Set channel filter=0.000000e+000 result=40 14:25:25 Config A/D Result=40 14:25:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:25 Get A/D filter: -9.255963e+061 result=40 14:25:25 Get A/D value=-858993460 result=40 14:25:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:25 Aux= 14:25:25 Message to Camera, serial 145380 queued 14:25:34 Received message from Master: op=Shutter serial=145390 14:25:34 Shutter LASER close 14:25:34 Received message from Master: op=PointingHead serial=145394 14:25:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:25:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:25:35 Point started: ret=0 14:25:35 point_skyscan result=0 14:25:35 Check angles 14:25:35 SkyScan query 14:25:36 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.07<-21538 Statuses=0009 0009 14:25:36 Msec=0 True Az=136.155 Ze=-143.07 Az status=0009 Ze status=0009 14:25:36 Check angles 14:25:36 SkyScan query 14:25:37 SkyScan query done: ret=0 az=153.66<-10244 ze=-122.07<-20138 Statuses=0009 0009 14:25:37 Msec=750 True Az=153.66 Ze=-122.07 Az status=0009 Ze status=0009 14:25:37 Check angles 14:25:37 SkyScan query 14:25:37 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.1<-18740 Statuses=0009 0009 14:25:37 Msec=1500 True Az=171.24 Ze=-101.1 Az status=0009 Ze status=0009 14:25:38 Check angles 14:25:38 SkyScan query 14:25:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.71<-17314 Statuses=0008 0009 14:25:38 Msec=2250 True Az=176.01 Ze=-79.71 Az status=0008 Ze status=0009 14:25:38 Check angles 14:25:38 SkyScan query 14:25:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.725<-15915 Statuses=0008 0009 14:25:39 Msec=3000 True Az=176.01 Ze=-58.725 Az status=0008 Ze status=0009 14:25:39 Check angles 14:25:39 SkyScan query 14:25:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:25:40 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:25:40 Message to Master queued w/err=0: serial=145394 error=0 14:25:45 Received message from Master: op=Filter serial=145395 14:25:45 Color wheel filter change from 0 to 0 14:25:45 FLIGetFilterPos err=0 currentPosition=0 14:25:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:45 Filter is already there-color wheel unchanged 14:25:45 Received message from Master: op=Shutter serial=145396 [UTC 2018-12-14 14:25:45] 14:25:45 Shutter LASER close 14:25:45 Received message from Camera: op=State serial=145398 14:25:45 GetSingleValue result=40 Value=cccccccc 14:25:45 SkyScan query 14:25:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:25:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:46 Parameters OK 14:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:46 Set A/D data flow result=40 14:25:46 Set A/D channel type result=40 14:25:46 Set A/D encoding result=40 14:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:46 Set channel filter=0.000000e+000 result=40 14:25:46 Config A/D Result=40 14:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:46 Get A/D filter: -9.255963e+061 result=40 14:25:46 Get A/D value=-858993460 result=40 14:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:46 Parameters OK 14:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:46 Set A/D data flow result=40 14:25:46 Set A/D channel type result=40 14:25:46 Set A/D encoding result=40 14:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:46 Set channel filter=0.000000e+000 result=40 14:25:46 Config A/D Result=40 14:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:46 Get A/D filter: -9.255963e+061 result=40 14:25:46 Get A/D value=-858993460 result=40 14:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:46 Aux= 14:25:46 Message to Camera, serial 145398 queued 14:26:22 Received message from Master: op=PointingHead serial=145411 14:26:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:26:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:26:23 Point started: ret=0 14:26:23 point_skyscan result=0 14:26:23 Check angles 14:26:23 SkyScan query 14:26:24 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.9<-13460 Statuses=0009 0009 14:26:24 Msec=0 True Az=152.97 Ze=-21.9 Az status=0009 Ze status=0009 14:26:24 Check angles 14:26:24 SkyScan query 14:26:25 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.9<-12060 Statuses=0009 0009 14:26:25 Msec=750 True Az=135.405 Ze=-0.9 Az status=0009 Ze status=0009 14:26:25 Check angles 14:26:25 SkyScan query 14:26:26 SkyScan query done: ret=0 az=118.02<-7868 ze=20.025<-10665 Statuses=0009 0009 14:26:26 Msec=1500 True Az=118.02 Ze=20.025 Az status=0009 Ze status=0009 14:26:26 Check angles 14:26:26 SkyScan query 14:26:26 SkyScan query done: ret=0 az=100.29<-6686 ze=41.46<-9236 Statuses=0009 0009 14:26:26 Msec=2250 True Az=100.29 Ze=41.46 Az status=0009 Ze status=0009 14:26:26 Check angles 14:26:26 SkyScan query 14:26:27 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 14:26:27 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 14:26:27 Check angles 14:26:27 SkyScan query 14:26:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:26:28 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:26:28 Message to Master queued w/err=0: serial=145411 error=0 14:26:33 Received message from Master: op=Filter serial=145412 14:26:33 Color wheel filter change from 0 to 0 14:26:33 FLIGetFilterPos err=0 currentPosition=0 14:26:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:33 Filter is already there-color wheel unchanged 14:26:33 Received message from Master: op=Shutter serial=145413 14:26:33 Shutter LASER close 14:26:33 Received message from Camera: op=State serial=145415 14:26:33 GetSingleValue result=40 Value=cccccccc 14:26:33 SkyScan query 14:26:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:26:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:34 Parameters OK 14:26:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:34 Set A/D data flow result=40 14:26:34 Set A/D channel type result=40 14:26:34 Set A/D encoding result=40 14:26:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:34 Set channel filter=0.000000e+000 result=40 14:26:34 Config A/D Result=40 14:26:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:34 Get A/D filter: -9.255963e+061 result=40 14:26:34 Get A/D value=-858993460 result=40 14:26:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:34 Parameters OK 14:26:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:34 Set A/D data flow result=40 14:26:34 Set A/D channel type result=40 14:26:34 Set A/D encoding result=40 14:26:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:34 Set channel filter=0.000000e+000 result=40 14:26:34 Config A/D Result=40 14:26:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:34 Get A/D filter: -9.255963e+061 result=40 14:26:34 Get A/D value=-858993460 result=40 14:26:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:34 Aux= 14:26:34 Message to Camera, serial 145415 queued 14:27:10 Received message from Master: op=PointingHead serial=145428 14:27:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:27:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:27:11 Point started: ret=0 14:27:11 point_skyscan result=0 14:27:12 Check angles 14:27:12 SkyScan query 14:27:12 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 14:27:12 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 14:27:12 Check angles 14:27:12 SkyScan query 14:27:13 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 14:27:13 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 14:27:13 Check angles 14:27:13 SkyScan query 14:27:14 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 14:27:14 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 14:27:14 Check angles 14:27:14 SkyScan query 14:27:14 SkyScan query done: ret=0 az=161.625<-10775 ze=38.505<-9433 Statuses=0009 0008 14:27:14 Msec=2250 True Az=161.625 Ze=38.505 Az status=0009 Ze status=0008 14:27:15 Check angles 14:27:15 SkyScan query 14:27:15 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:27:15 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:27:15 Check angles 14:27:15 SkyScan query 14:27:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:27:16 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:27:16 Message to Master queued w/err=0: serial=145428 error=0 14:27:21 Received message from Master: op=Filter serial=145429 14:27:21 Color wheel filter change from 0 to 0 14:27:21 FLIGetFilterPos err=0 currentPosition=0 14:27:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:21 Filter is already there-color wheel unchanged 14:27:21 Received message from Master: op=Shutter serial=145430 14:27:21 Shutter LASER close 14:27:21 Received message from Camera: op=State serial=145432 14:27:21 GetSingleValue result=40 Value=cccccccc 14:27:21 SkyScan query 14:27:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:27:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:22 Parameters OK 14:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:22 Set A/D data flow result=40 14:27:22 Set A/D channel type result=40 14:27:22 Set A/D encoding result=40 14:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:22 Set channel filter=0.000000e+000 result=40 14:27:22 Config A/D Result=40 14:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:22 Get A/D filter: -9.255963e+061 result=40 14:27:22 Get A/D value=-858993460 result=40 14:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:22 Parameters OK 14:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:22 Set A/D data flow result=40 14:27:22 Set A/D channel type result=40 14:27:22 Set A/D encoding result=40 14:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:22 Set channel filter=0.000000e+000 result=40 14:27:22 Config A/D Result=40 14:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:22 Get A/D filter: -9.255963e+061 result=40 14:27:22 Get A/D value=-858993460 result=40 14:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:22 Aux= 14:27:22 Message to Camera, serial 145432 queued 14:27:59 Received message from Master: op=PointingHead serial=145445 14:27:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:27:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:27:59 Point started: ret=0 14:27:59 point_skyscan result=0 14:28:00 Check angles 14:28:00 SkyScan query 14:28:00 SkyScan query done: ret=0 az=152.895<-10193 ze=8.49<-11434 Statuses=0009 0009 14:28:00 Msec=0 True Az=152.895 Ze=8.49 Az status=0009 Ze status=0009 14:28:00 Check angles 14:28:00 SkyScan query 14:28:01 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.42<-12828 Statuses=0009 0009 14:28:01 Msec=750 True Az=135.345 Ze=-12.42 Az status=0009 Ze status=0009 14:28:01 Check angles 14:28:01 SkyScan query 14:28:02 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.405<-14227 Statuses=0009 0009 14:28:02 Msec=1500 True Az=117.78 Ze=-33.405 Az status=0009 Ze status=0009 14:28:02 Check angles 14:28:02 SkyScan query 14:28:02 SkyScan query done: ret=0 az=100.095<-6673 ze=-51.57<-15438 Statuses=0009 0009 14:28:02 Msec=2250 True Az=100.095 Ze=-51.57 Az status=0009 Ze status=0009 14:28:03 Check angles 14:28:03 SkyScan query 14:28:03 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 14:28:03 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 14:28:03 Check angles 14:28:03 SkyScan query 14:28:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:28:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:28:04 Message to Master queued w/err=0: serial=145445 error=0 14:28:09 Received message from Master: op=Filter serial=145446 14:28:09 Color wheel filter change from 0 to 0 14:28:09 FLIGetFilterPos err=0 currentPosition=0 14:28:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:09 Filter is already there-color wheel unchanged 14:28:09 Received message from Master: op=Shutter serial=145447 14:28:09 Shutter LASER close 14:28:09 Received message from Camera: op=State serial=145449 14:28:09 GetSingleValue result=40 Value=cccccccc 14:28:09 SkyScan query 14:28:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:28:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:10 Parameters OK 14:28:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:10 Set A/D data flow result=40 14:28:10 Set A/D channel type result=40 14:28:10 Set A/D encoding result=40 14:28:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:10 Set channel filter=0.000000e+000 result=40 14:28:10 Config A/D Result=40 14:28:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:10 Get A/D filter: -9.255963e+061 result=40 14:28:10 Get A/D value=-858993460 result=40 14:28:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:10 Parameters OK 14:28:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:10 Set A/D data flow result=40 14:28:10 Set A/D channel type result=40 14:28:10 Set A/D encoding result=40 14:28:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:10 Set channel filter=0.000000e+000 result=40 14:28:10 Config A/D Result=40 14:28:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:10 Get A/D filter: -9.255963e+061 result=40 14:28:10 Get A/D value=-858993460 result=40 14:28:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:10 Aux= 14:28:10 Message to Camera, serial 145449 queued 14:28:47 Received message from Master: op=PointingHead serial=145462 14:28:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:28:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:28:47 Point started: ret=0 14:28:47 point_skyscan result=0 14:28:48 Check angles 14:28:48 SkyScan query 14:28:48 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.555<-17437 Statuses=0009 0009 14:28:48 Msec=0 True Az=109.185 Ze=-81.555 Az status=0009 Ze status=0009 14:28:49 Check angles 14:28:49 SkyScan query 14:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 14:28:49 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 14:28:49 Check angles 14:28:49 SkyScan query 14:28:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.465<-20231 Statuses=0008 0009 14:28:50 Msec=1500 True Az=112.995 Ze=-123.465 Az status=0008 Ze status=0009 14:28:50 Check angles 14:28:50 SkyScan query 14:28:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 14:28:51 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 14:28:51 Check angles 14:28:51 SkyScan query 14:28:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 14:28:51 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 14:28:52 Check angles 14:28:52 SkyScan query 14:28:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:28:52 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:28:52 Message to Master queued w/err=0: serial=145462 error=0 14:28:57 Received message from Master: op=Filter serial=145463 14:28:57 Color wheel filter change from 0 to 0 14:28:57 FLIGetFilterPos err=0 currentPosition=0 14:28:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:57 Filter is already there-color wheel unchanged 14:28:57 Received message from Master: op=Shutter serial=145464 14:28:57 Shutter LASER open 14:28:58 Received message from Camera: op=State serial=145466 14:28:58 GetSingleValue result=40 Value=cccccccc 14:28:58 SkyScan query 14:28:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:28:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:58 Parameters OK 14:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:58 Set A/D data flow result=40 14:28:58 Set A/D channel type result=40 14:28:58 Set A/D encoding result=40 14:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:58 Set channel filter=0.000000e+000 result=40 14:28:58 Config A/D Result=40 14:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:58 Get A/D filter: -9.255963e+061 result=40 14:28:58 Get A/D value=-858993460 result=40 14:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:58 Parameters OK 14:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:58 Set A/D data flow result=40 14:28:58 Set A/D channel type result=40 14:28:58 Set A/D encoding result=40 14:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:58 Set channel filter=0.000000e+000 result=40 14:28:58 Config A/D Result=40 14:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:58 Get A/D filter: -9.255963e+061 result=40 14:28:58 Get A/D value=-858993460 result=40 14:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:58 Aux= 14:28:58 Message to Camera, serial 145466 queued 14:29:07 Received message from Master: op=Shutter serial=145476 14:29:07 Shutter LASER close 14:29:07 Received message from Master: op=PointingHead serial=145480 14:29:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:29:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:29:07 Point started: ret=0 14:29:07 point_skyscan result=0 14:29:08 Check angles 14:29:08 SkyScan query 14:29:09 SkyScan query done: ret=0 az=89.565<-5971 ze=156.6<-1560 Statuses=0009 0009 14:29:09 Msec=0 True Az=89.565 Ze=156.6 Az status=0009 Ze status=0009 14:29:09 Check angles 14:29:09 SkyScan query 14:29:09 SkyScan query done: ret=0 az=71.58<-4772 ze=135.375<-2975 Statuses=0009 0009 14:29:09 Msec=750 True Az=71.58 Ze=135.375 Az status=0009 Ze status=0009 14:29:10 Check angles 14:29:10 SkyScan query 14:29:10 SkyScan query done: ret=0 az=54.255<-3617 ze=114.36<-4376 Statuses=0009 0009 14:29:10 Msec=1500 True Az=54.255 Ze=114.36 Az status=0009 Ze status=0009 14:29:10 Check angles 14:29:10 SkyScan query 14:29:11 SkyScan query done: ret=0 az=40.965<-2731 ze=93.465<-5769 Statuses=0009 0009 14:29:11 Msec=2250 True Az=40.965 Ze=93.465 Az status=0009 Ze status=0009 14:29:11 Check angles 14:29:11 SkyScan query 14:29:12 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 14:29:12 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 14:29:12 Check angles 14:29:12 SkyScan query 14:29:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 14:29:12 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 14:29:13 Check angles 14:29:13 SkyScan query 14:29:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:29:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:29:13 Message to Master queued w/err=0: serial=145480 error=0 14:29:18 Received message from Master: op=Filter serial=145481 14:29:18 Color wheel filter change from 0 to 0 14:29:18 FLIGetFilterPos err=0 currentPosition=0 14:29:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:18 Filter is already there-color wheel unchanged 14:29:18 Received message from Master: op=Shutter serial=145482 14:29:18 Shutter LASER close 14:29:19 Received message from Camera: op=State serial=145484 14:29:19 GetSingleValue result=40 Value=cccccccc 14:29:19 SkyScan query 14:29:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:29:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:19 Parameters OK 14:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:19 Set A/D data flow result=40 14:29:19 Set A/D channel type result=40 14:29:19 Set A/D encoding result=40 14:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:19 Set channel filter=0.000000e+000 result=40 14:29:19 Config A/D Result=40 14:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:19 Get A/D filter: -9.255963e+061 result=40 14:29:19 Get A/D value=-858993460 result=40 14:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:19 Parameters OK 14:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:19 Set A/D data flow result=40 14:29:19 Set A/D channel type result=40 14:29:19 Set A/D encoding result=40 14:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:19 Set channel filter=0.000000e+000 result=40 14:29:19 Config A/D Result=40 14:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:19 Get A/D filter: -9.255963e+061 result=40 14:29:19 Get A/D value=-858993460 result=40 14:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:19 Aux= 14:29:19 Message to Camera, serial 145484 queued 14:29:56 Received message from Master: op=PointingHead serial=145497 14:29:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:29:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:29:56 Point started: ret=0 14:29:56 point_skyscan result=0 14:29:57 Check angles 14:29:57 SkyScan query 14:29:58 SkyScan query done: ret=0 az=63.705<-4247 ze=66.525<-7565 Statuses=0009 0008 14:29:58 Msec=0 True Az=63.705 Ze=66.525 Az status=0009 Ze status=0008 14:29:58 Check angles 14:29:58 SkyScan query 14:29:58 SkyScan query done: ret=0 az=81.585<-5439 ze=66.525<-7565 Statuses=0009 0008 14:29:58 Msec=750 True Az=81.585 Ze=66.525 Az status=0009 Ze status=0008 14:29:59 Check angles 14:29:59 SkyScan query 14:29:59 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 14:29:59 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 14:29:59 Check angles 14:29:59 SkyScan query 14:30:00 SkyScan query done: ret=0 az=116.625<-7775 ze=66.495<-7567 Statuses=0009 0008 14:30:00 Msec=2250 True Az=116.625 Ze=66.495 Az status=0009 Ze status=0008 14:30:00 Check angles 14:30:00 SkyScan query 14:30:01 SkyScan query done: ret=0 az=134.52<-8968 ze=66.495<-7567 Statuses=0009 0008 14:30:01 Msec=3000 True Az=134.52 Ze=66.495 Az status=0009 Ze status=0008 14:30:01 Check angles 14:30:01 SkyScan query 14:30:01 SkyScan query done: ret=0 az=151.86<-10124 ze=66.495<-7567 Statuses=0009 0008 14:30:01 Msec=3750 True Az=151.86 Ze=66.495 Az status=0009 Ze status=0008 14:30:02 Check angles 14:30:02 SkyScan query 14:30:02 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 14:30:02 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 14:30:02 Message to Master queued w/err=0: serial=145497 error=0 14:30:07 Received message from Master: op=Filter serial=145498 14:30:07 Color wheel filter change from 0 to 0 14:30:07 FLIGetFilterPos err=0 currentPosition=0 14:30:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:07 Filter is already there-color wheel unchanged 14:30:07 Received message from Master: op=Shutter serial=145499 14:30:07 Shutter LASER close 14:30:07 Received message from Camera: op=State serial=145501 14:30:07 GetSingleValue result=40 Value=cccccccc 14:30:07 SkyScan query 14:30:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:30:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:08 Parameters OK 14:30:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:08 Set A/D data flow result=40 14:30:08 Set A/D channel type result=40 14:30:08 Set A/D encoding result=40 14:30:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:08 Set channel filter=0.000000e+000 result=40 14:30:08 Config A/D Result=40 14:30:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:08 Get A/D filter: -9.255963e+061 result=40 14:30:08 Get A/D value=-858993460 result=40 14:30:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:08 Parameters OK 14:30:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:08 Set A/D data flow result=40 14:30:08 Set A/D channel type result=40 14:30:08 Set A/D encoding result=40 14:30:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:08 Set channel filter=0.000000e+000 result=40 14:30:08 Config A/D Result=40 14:30:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:08 Get A/D filter: -9.255963e+061 result=40 14:30:08 Get A/D value=-858993460 result=40 14:30:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:08 Aux= 14:30:08 Message to Camera, serial 145501 queued 14:30:45 Received message from Master: op=PointingHead serial=145514 14:30:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:30:45 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:30:45 Point started: ret=0 14:30:45 point_skyscan result=0 14:30:46 Check angles 14:30:46 SkyScan query 14:30:46 SkyScan query done: ret=0 az=134.79<-8986 ze=36.69<-9554 Statuses=0009 0009 14:30:46 Msec=0 True Az=134.79 Ze=36.69 Az status=0009 Ze status=0009 14:30:47 Check angles 14:30:47 SkyScan query 14:30:47 SkyScan query done: ret=0 az=117.045<-7803 ze=15.3<-10980 Statuses=0009 0009 14:30:47 Msec=750 True Az=117.045 Ze=15.3 Az status=0009 Ze status=0009 14:30:47 Check angles 14:30:47 SkyScan query 14:30:48 SkyScan query done: ret=0 az=99.645<-6643 ze=-5.73<-12382 Statuses=0009 0009 14:30:48 Msec=1500 True Az=99.645 Ze=-5.73 Az status=0009 Ze status=0009 14:30:48 Check angles 14:30:48 SkyScan query 14:30:49 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.775<-13785 Statuses=0009 0009 14:30:49 Msec=2250 True Az=82.2 Ze=-26.775 Az status=0009 Ze status=0009 14:30:49 Check angles 14:30:49 SkyScan query 14:30:49 SkyScan query done: ret=0 az=64.305<-4287 ze=-38.58<-14572 Statuses=0009 0008 14:30:49 Msec=3000 True Az=64.305 Ze=-38.58 Az status=0009 Ze status=0008 14:30:50 Check angles 14:30:50 SkyScan query 14:30:50 SkyScan query done: ret=0 az=46.785<-3119 ze=-38.52<-14568 Statuses=0009 0008 14:30:50 Msec=3750 True Az=46.785 Ze=-38.52 Az status=0009 Ze status=0008 14:30:50 Check angles 14:30:50 SkyScan query 14:30:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:30:51 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:30:51 Message to Master queued w/err=0: serial=145514 error=0 14:30:56 Received message from Master: op=Filter serial=145515 14:30:56 Color wheel filter change from 0 to 0 14:30:56 FLIGetFilterPos err=0 currentPosition=0 14:30:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:56 Filter is already there-color wheel unchanged 14:30:56 Received message from Master: op=Shutter serial=145516 14:30:56 Shutter LASER close 14:30:56 Received message from Camera: op=State serial=145518 14:30:56 GetSingleValue result=40 Value=cccccccc 14:30:56 SkyScan query 14:30:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:30:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:57 Parameters OK 14:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:57 Set A/D data flow result=40 14:30:57 Set A/D channel type result=40 14:30:57 Set A/D encoding result=40 14:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:57 Set channel filter=0.000000e+000 result=40 14:30:57 Config A/D Result=40 14:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:57 Get A/D filter: -9.255963e+061 result=40 14:30:57 Get A/D value=-858993460 result=40 14:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:57 Parameters OK 14:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:57 Set A/D data flow result=40 14:30:57 Set A/D channel type result=40 14:30:57 Set A/D encoding result=40 14:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:57 Set channel filter=0.000000e+000 result=40 14:30:57 Config A/D Result=40 14:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:57 Get A/D filter: -9.255963e+061 result=40 14:30:57 Get A/D value=-858993460 result=40 14:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:57 Aux= 14:30:57 Message to Camera, serial 145518 queued 14:31:34 Received message from Master: op=PointingHead serial=145531 14:31:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:31:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:31:34 Point started: ret=0 14:31:34 point_skyscan result=0 14:31:35 Check angles 14:31:35 SkyScan query 14:31:35 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.22<-16548 Statuses=0009 0009 14:31:35 Msec=0 True Az=63.96 Ze=-68.22 Az status=0009 Ze status=0009 14:31:35 Check angles 14:31:35 SkyScan query 14:31:36 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.61<-17974 Statuses=0009 0009 14:31:36 Msec=750 True Az=81.78 Ze=-89.61 Az status=0009 Ze status=0009 14:31:36 Check angles 14:31:36 SkyScan query 14:31:37 SkyScan query done: ret=0 az=99.255<-6617 ze=-110.625<-19375 Statuses=0009 0009 14:31:37 Msec=1500 True Az=99.255 Ze=-110.625 Az status=0009 Ze status=0009 14:31:37 Check angles 14:31:37 SkyScan query 14:31:38 SkyScan query done: ret=0 az=116.685<-7779 ze=-131.49<-20766 Statuses=0009 0009 14:31:38 Msec=2250 True Az=116.685 Ze=-131.49 Az status=0009 Ze status=0009 14:31:38 Check angles 14:31:38 SkyScan query 14:31:38 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 14:31:38 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 14:31:38 Check angles 14:31:38 SkyScan query 14:31:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 14:31:39 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 14:31:39 Message to Master queued w/err=0: serial=145531 error=0 14:31:44 Received message from Master: op=Filter serial=145532 14:31:44 Color wheel filter change from 0 to 0 14:31:44 FLIGetFilterPos err=0 currentPosition=0 14:31:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:44 Filter is already there-color wheel unchanged 14:31:44 Received message from Master: op=Shutter serial=145533 14:31:44 Shutter LASER close 14:31:44 Received message from Camera: op=State serial=145535 14:31:44 GetSingleValue result=40 Value=cccccccc 14:31:44 SkyScan query 14:31:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:31:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:45 Parameters OK 14:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:45 Set A/D data flow result=40 14:31:45 Set A/D channel type result=40 14:31:45 Set A/D encoding result=40 14:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:45 Set channel filter=0.000000e+000 result=40 14:31:45 Config A/D Result=40 14:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:45 Get A/D filter: -9.255963e+061 result=40 14:31:45 Get A/D value=-858993460 result=40 14:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:45 Parameters OK 14:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:45 Set A/D data flow result=40 14:31:45 Set A/D channel type result=40 14:31:45 Set A/D encoding result=40 14:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:45 Set channel filter=0.000000e+000 result=40 14:31:45 Config A/D Result=40 14:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:45 Get A/D filter: -9.255963e+061 result=40 14:31:45 Get A/D value=-858993460 result=40 14:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:45 Aux= 14:31:45 Message to Camera, serial 145535 queued 14:32:22 Received message from Master: op=PointingHead serial=145548 14:32:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:32:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:32:22 Point started: ret=0 14:32:22 point_skyscan result=0 14:32:23 Check angles 14:32:23 SkyScan query 14:32:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0009 0009 14:32:23 Msec=0 True Az=112.995 Ze=-170.895 Az status=0009 Ze status=0009 14:32:23 Check angles 14:32:23 SkyScan query 14:32:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:32:24 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:32:24 Message to Master queued w/err=0: serial=145548 error=0 14:32:29 Received message from Master: op=Filter serial=145549 14:32:29 Color wheel filter change from 0 to 0 14:32:29 FLIGetFilterPos err=0 currentPosition=0 14:32:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:29 Filter is already there-color wheel unchanged 14:32:29 Received message from Master: op=Shutter serial=145550 14:32:29 Shutter LASER open 14:32:29 Received message from Camera: op=State serial=145552 14:32:29 GetSingleValue result=40 Value=cccccccc 14:32:29 SkyScan query 14:32:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:32:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:30 Parameters OK 14:32:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:30 Set A/D data flow result=40 14:32:30 Set A/D channel type result=40 14:32:30 Set A/D encoding result=40 14:32:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:30 Set channel filter=0.000000e+000 result=40 14:32:30 Config A/D Result=40 14:32:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:30 Get A/D filter: -9.255963e+061 result=40 14:32:30 Get A/D value=-858993460 result=40 14:32:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:30 Parameters OK 14:32:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:30 Set A/D data flow result=40 14:32:30 Set A/D channel type result=40 14:32:30 Set A/D encoding result=40 14:32:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:30 Set channel filter=0.000000e+000 result=40 14:32:30 Config A/D Result=40 14:32:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:30 Get A/D filter: -9.255963e+061 result=40 14:32:30 Get A/D value=-858993460 result=40 14:32:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:30 Aux= 14:32:30 Message to Camera, serial 145552 queued 14:32:38 Received message from Master: op=Shutter serial=145562 14:32:38 Shutter LASER close 14:32:39 Received message from Master: op=PointingHead serial=145566 14:32:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:32:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:32:39 Point started: ret=0 14:32:39 point_skyscan result=0 14:32:40 Check angles 14:32:40 SkyScan query 14:32:41 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.025<-21535 Statuses=0009 0009 14:32:41 Msec=0 True Az=136.155 Ze=-143.025 Az status=0009 Ze status=0009 14:32:41 Check angles 14:32:41 SkyScan query 14:32:41 SkyScan query done: ret=0 az=154.05<-10270 ze=-121.62<-20108 Statuses=0009 0009 14:32:41 Msec=750 True Az=154.05 Ze=-121.62 Az status=0009 Ze status=0009 14:32:42 Check angles 14:32:42 SkyScan query 14:32:42 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.545<-18703 Statuses=0009 0009 14:32:42 Msec=1500 True Az=171.525 Ze=-100.545 Az status=0009 Ze status=0009 14:32:42 Check angles 14:32:42 SkyScan query 14:32:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.68<-17312 Statuses=0008 0009 14:32:43 Msec=2250 True Az=176.01 Ze=-79.68 Az status=0008 Ze status=0009 14:32:43 Check angles 14:32:43 SkyScan query 14:32:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.245<-15883 Statuses=0008 0009 14:32:44 Msec=3000 True Az=176.01 Ze=-58.245 Az status=0008 Ze status=0009 14:32:44 Check angles 14:32:44 SkyScan query 14:32:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 14:32:44 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 14:32:44 Message to Master queued w/err=0: serial=145566 error=0 14:32:49 Received message from Master: op=Filter serial=145567 14:32:49 Color wheel filter change from 0 to 0 14:32:49 FLIGetFilterPos err=0 currentPosition=0 14:32:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:49 Filter is already there-color wheel unchanged 14:32:50 Received message from Master: op=Shutter serial=145568 14:32:50 Shutter LASER close 14:32:50 Received message from Camera: op=State serial=145570 14:32:50 GetSingleValue result=40 Value=cccccccc 14:32:50 SkyScan query 14:32:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:32:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:50 Parameters OK 14:32:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:50 Set A/D data flow result=40 14:32:50 Set A/D channel type result=40 14:32:50 Set A/D encoding result=40 14:32:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:50 Set channel filter=0.000000e+000 result=40 14:32:50 Config A/D Result=40 14:32:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:50 Get A/D filter: -9.255963e+061 result=40 14:32:50 Get A/D value=-858993460 result=40 14:32:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:50 Parameters OK 14:32:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:50 Set A/D data flow result=40 14:32:50 Set A/D channel type result=40 14:32:50 Set A/D encoding result=40 14:32:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:50 Set channel filter=0.000000e+000 result=40 14:32:50 Config A/D Result=40 14:32:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:50 Get A/D filter: -9.255963e+061 result=40 14:32:50 Get A/D value=-858993460 result=40 14:32:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:50 Aux= 14:32:50 Message to Camera, serial 145570 queued 14:33:26 Received message from Master: op=PointingHead serial=145582 14:33:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:33:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:33:27 Point started: ret=0 14:33:27 point_skyscan result=0 14:33:27 Check angles 14:33:27 SkyScan query 14:33:28 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.99<-13466 Statuses=0009 0009 14:33:28 Msec=0 True Az=152.97 Ze=-21.99 Az status=0009 Ze status=0009 14:33:28 Check angles 14:33:28 SkyScan query 14:33:29 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.99<-12066 Statuses=0009 0009 14:33:29 Msec=750 True Az=135.615 Ze=-0.99 Az status=0009 Ze status=0009 14:33:29 Check angles 14:33:29 SkyScan query 14:33:29 SkyScan query done: ret=0 az=118.035<-7869 ze=19.935<-10671 Statuses=0009 0009 14:33:29 Msec=1500 True Az=118.035 Ze=19.935 Az status=0009 Ze status=0009 14:33:30 Check angles 14:33:30 SkyScan query 14:33:30 SkyScan query done: ret=0 az=100.68<-6712 ze=40.905<-9273 Statuses=0009 0009 14:33:30 Msec=2250 True Az=100.68 Ze=40.905 Az status=0009 Ze status=0009 14:33:30 Check angles 14:33:30 SkyScan query 14:33:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 14:33:31 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 14:33:31 Check angles 14:33:31 SkyScan query 14:33:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:33:32 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:33:32 Message to Master queued w/err=0: serial=145582 error=0 14:33:37 Received message from Master: op=Filter serial=145583 14:33:37 Color wheel filter change from 0 to 0 14:33:37 FLIGetFilterPos err=0 currentPosition=0 14:33:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:37 Filter is already there-color wheel unchanged 14:33:37 Received message from Master: op=Shutter serial=145584 14:33:37 Shutter LASER close 14:33:37 Received message from Camera: op=State serial=145586 14:33:37 GetSingleValue result=40 Value=cccccccc 14:33:37 SkyScan query 14:33:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:33:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:38 Parameters OK 14:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:38 Set A/D data flow result=40 14:33:38 Set A/D channel type result=40 14:33:38 Set A/D encoding result=40 14:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:38 Set channel filter=0.000000e+000 result=40 14:33:38 Config A/D Result=40 14:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:38 Get A/D filter: -9.255963e+061 result=40 14:33:38 Get A/D value=-858993460 result=40 14:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:38 Parameters OK 14:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:38 Set A/D data flow result=40 14:33:38 Set A/D channel type result=40 14:33:38 Set A/D encoding result=40 14:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:38 Set channel filter=0.000000e+000 result=40 14:33:38 Config A/D Result=40 14:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:38 Get A/D filter: -9.255963e+061 result=40 14:33:38 Get A/D value=-858993460 result=40 14:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:38 Aux= 14:33:38 Message to Camera, serial 145586 queued 14:34:13 Received message from Master: op=PointingHead serial=145598 14:34:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:34:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:34:14 Point started: ret=0 14:34:14 point_skyscan result=0 14:34:14 Check angles 14:34:14 SkyScan query 14:34:15 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 14:34:15 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 14:34:15 Check angles 14:34:15 SkyScan query 14:34:16 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 14:34:16 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 14:34:16 Check angles 14:34:16 SkyScan query 14:34:17 SkyScan query done: ret=0 az=143.79<-9586 ze=38.505<-9433 Statuses=0009 0008 14:34:17 Msec=1500 True Az=143.79 Ze=38.505 Az status=0009 Ze status=0008 14:34:17 Check angles 14:34:17 SkyScan query 14:34:17 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 14:34:17 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 14:34:18 Check angles 14:34:18 SkyScan query 14:34:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 14:34:18 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 14:34:18 Check angles 14:34:18 SkyScan query 14:34:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:34:19 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:34:19 Message to Master queued w/err=0: serial=145598 error=0 14:34:24 Received message from Master: op=Filter serial=145599 14:34:24 Color wheel filter change from 0 to 0 14:34:24 FLIGetFilterPos err=0 currentPosition=0 14:34:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:24 Filter is already there-color wheel unchanged 14:34:24 Received message from Master: op=Shutter serial=145600 14:34:24 Shutter LASER close 14:34:24 Received message from Camera: op=State serial=145602 14:34:24 GetSingleValue result=40 Value=cccccccc 14:34:24 SkyScan query 14:34:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:34:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:25 Parameters OK 14:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:25 Set A/D data flow result=40 14:34:25 Set A/D channel type result=40 14:34:25 Set A/D encoding result=40 14:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:25 Set channel filter=0.000000e+000 result=40 14:34:25 Config A/D Result=40 14:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:25 Get A/D filter: -9.255963e+061 result=40 14:34:25 Get A/D value=-858993460 result=40 14:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:25 Parameters OK 14:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:25 Set A/D data flow result=40 14:34:25 Set A/D channel type result=40 14:34:25 Set A/D encoding result=40 14:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:25 Set channel filter=0.000000e+000 result=40 14:34:25 Config A/D Result=40 14:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:25 Get A/D filter: -9.255963e+061 result=40 14:34:25 Get A/D value=-858993460 result=40 14:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:25 Aux= 14:34:25 Message to Camera, serial 145602 queued 14:35:01 Received message from Master: op=PointingHead serial=145615 14:35:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:35:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:35:02 Point started: ret=0 14:35:02 point_skyscan result=0 14:35:03 Check angles 14:35:03 SkyScan query 14:35:03 SkyScan query done: ret=0 az=153.195<-10213 ze=9<-11400 Statuses=0009 0009 14:35:03 Msec=0 True Az=153.195 Ze=9 Az status=0009 Ze status=0009 14:35:03 Check angles 14:35:03 SkyScan query 14:35:04 SkyScan query done: ret=0 az=135.84<-9056 ze=-12<-12800 Statuses=0009 0009 14:35:04 Msec=750 True Az=135.84 Ze=-12 Az status=0009 Ze status=0009 14:35:04 Check angles 14:35:04 SkyScan query 14:35:05 SkyScan query done: ret=0 az=118.23<-7882 ze=-32.925<-14195 Statuses=0009 0009 14:35:05 Msec=1500 True Az=118.23 Ze=-32.925 Az status=0009 Ze status=0009 14:35:05 Check angles 14:35:05 SkyScan query 14:35:05 SkyScan query done: ret=0 az=100.815<-6721 ze=-51.51<-15434 Statuses=0009 0009 14:35:05 Msec=2250 True Az=100.815 Ze=-51.51 Az status=0009 Ze status=0009 14:35:06 Check angles 14:35:06 SkyScan query 14:35:06 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:35:06 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:35:06 Check angles 14:35:06 SkyScan query 14:35:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:35:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:35:07 Message to Master queued w/err=0: serial=145615 error=0 14:35:12 Received message from Master: op=Filter serial=145616 14:35:12 Color wheel filter change from 0 to 0 14:35:12 FLIGetFilterPos err=0 currentPosition=0 14:35:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:12 Filter is already there-color wheel unchanged 14:35:12 Received message from Master: op=Shutter serial=145617 14:35:12 Shutter LASER close 14:35:12 Received message from Camera: op=State serial=145619 14:35:12 GetSingleValue result=40 Value=cccccccc 14:35:12 SkyScan query 14:35:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:35:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:13 Parameters OK 14:35:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:13 Set A/D data flow result=40 14:35:13 Set A/D channel type result=40 14:35:13 Set A/D encoding result=40 14:35:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:13 Set channel filter=0.000000e+000 result=40 14:35:13 Config A/D Result=40 14:35:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:13 Get A/D filter: -9.255963e+061 result=40 14:35:13 Get A/D value=-858993460 result=40 14:35:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:13 Parameters OK 14:35:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:13 Set A/D data flow result=40 14:35:13 Set A/D channel type result=40 14:35:13 Set A/D encoding result=40 14:35:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:13 Set channel filter=0.000000e+000 result=40 14:35:13 Config A/D Result=40 14:35:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:13 Get A/D filter: -9.255963e+061 result=40 14:35:13 Get A/D value=-858993460 result=40 14:35:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:13 Aux= 14:35:13 Message to Camera, serial 145619 queued 14:35:49 Received message from Master: op=PointingHead serial=145632 14:35:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:35:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:35:50 Point started: ret=0 14:35:50 point_skyscan result=0 14:35:51 Check angles 14:35:51 SkyScan query 14:35:51 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.27<-17418 Statuses=0009 0009 14:35:51 Msec=0 True Az=109.005 Ze=-81.27 Az status=0009 Ze status=0009 14:35:51 Check angles 14:35:51 SkyScan query 14:35:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.69<-18846 Statuses=0008 0009 14:35:52 Msec=750 True Az=112.995 Ze=-102.69 Az status=0008 Ze status=0009 14:35:52 Check angles 14:35:52 SkyScan query 14:35:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.66<-20244 Statuses=0008 0009 14:35:53 Msec=1500 True Az=112.995 Ze=-123.66 Az status=0008 Ze status=0009 [UTC 2018-12-14 14:35:53] 14:35:53 Check angles 14:35:53 SkyScan query 14:35:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.555<-21637 Statuses=0008 0009 14:35:53 Msec=2250 True Az=112.995 Ze=-144.555 Az status=0008 Ze status=0009 14:35:54 Check angles 14:35:54 SkyScan query 14:35:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.525<-23035 Statuses=0008 0009 14:35:54 Msec=3000 True Az=112.995 Ze=-165.525 Az status=0008 Ze status=0009 14:35:54 Check angles 14:35:54 SkyScan query 14:35:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:35:55 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:35:55 Message to Master queued w/err=0: serial=145632 error=0 14:36:00 Received message from Master: op=Filter serial=145633 14:36:00 Color wheel filter change from 0 to 0 14:36:00 FLIGetFilterPos err=0 currentPosition=0 14:36:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:00 Filter is already there-color wheel unchanged 14:36:00 Received message from Master: op=Shutter serial=145634 14:36:00 Shutter LASER open 14:36:00 Received message from Camera: op=State serial=145636 14:36:00 GetSingleValue result=40 Value=cccccccc 14:36:00 SkyScan query 14:36:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:36:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:01 Parameters OK 14:36:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:01 Set A/D data flow result=40 14:36:01 Set A/D channel type result=40 14:36:01 Set A/D encoding result=40 14:36:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:01 Set channel filter=0.000000e+000 result=40 14:36:01 Config A/D Result=40 14:36:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:01 Get A/D filter: -9.255963e+061 result=40 14:36:01 Get A/D value=-858993460 result=40 14:36:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:01 Parameters OK 14:36:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:01 Set A/D data flow result=40 14:36:01 Set A/D channel type result=40 14:36:01 Set A/D encoding result=40 14:36:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:01 Set channel filter=0.000000e+000 result=40 14:36:01 Config A/D Result=40 14:36:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:01 Get A/D filter: -9.255963e+061 result=40 14:36:01 Get A/D value=-858993460 result=40 14:36:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:01 Aux= 14:36:01 Message to Camera, serial 145636 queued 14:36:09 Received message from Master: op=Shutter serial=145646 14:36:09 Shutter LASER close 14:36:10 Received message from Master: op=PointingHead serial=145650 14:36:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:36:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:36:10 Point started: ret=0 14:36:10 point_skyscan result=0 14:36:11 Check angles 14:36:11 SkyScan query 14:36:11 SkyScan query done: ret=0 az=89.805<-5987 ze=157.155<-1523 Statuses=0009 0009 14:36:11 Msec=0 True Az=89.805 Ze=157.155 Az status=0009 Ze status=0009 14:36:12 Check angles 14:36:12 SkyScan query 14:36:12 SkyScan query done: ret=0 az=71.97<-4798 ze=135.765<-2949 Statuses=0009 0009 14:36:12 Msec=750 True Az=71.97 Ze=135.765 Az status=0009 Ze status=0009 14:36:12 Check angles 14:36:12 SkyScan query 14:36:13 SkyScan query done: ret=0 az=53.985<-3599 ze=113.955<-4403 Statuses=0009 0009 14:36:13 Msec=1500 True Az=53.985 Ze=113.955 Az status=0009 Ze status=0009 14:36:13 Check angles 14:36:13 SkyScan query 14:36:14 SkyScan query done: ret=0 az=40.98<-2732 ze=92.97<-5802 Statuses=0009 0009 14:36:14 Msec=2250 True Az=40.98 Ze=92.97 Az status=0009 Ze status=0009 14:36:14 Check angles 14:36:14 SkyScan query 14:36:14 SkyScan query done: ret=0 az=40.995<-2733 ze=72.03<-7198 Statuses=0008 0009 14:36:14 Msec=3000 True Az=40.995 Ze=72.03 Az status=0008 Ze status=0009 14:36:15 Check angles 14:36:15 SkyScan query 14:36:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.065<-8529 Statuses=0008 0009 14:36:15 Msec=3750 True Az=40.995 Ze=52.065 Az status=0008 Ze status=0009 14:36:15 Check angles 14:36:15 SkyScan query 14:36:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:36:16 Msec=4500 True Az=40.995 Ze=51.495 Az status=0008 Ze status=0008 14:36:16 Message to Master queued w/err=0: serial=145650 error=0 14:36:21 Received message from Master: op=Filter serial=145651 14:36:21 Color wheel filter change from 0 to 0 14:36:21 FLIGetFilterPos err=0 currentPosition=0 14:36:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:21 Filter is already there-color wheel unchanged 14:36:21 Received message from Master: op=Shutter serial=145652 14:36:21 Shutter LASER close 14:36:21 Received message from Camera: op=State serial=145654 14:36:21 GetSingleValue result=40 Value=cccccccc 14:36:21 SkyScan query 14:36:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.51<-8566 Statuses=0008 0008 14:36:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:22 Parameters OK 14:36:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:22 Set A/D data flow result=40 14:36:22 Set A/D channel type result=40 14:36:22 Set A/D encoding result=40 14:36:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:22 Set channel filter=0.000000e+000 result=40 14:36:22 Config A/D Result=40 14:36:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:22 Get A/D filter: -9.255963e+061 result=40 14:36:22 Get A/D value=-858993460 result=40 14:36:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:22 Parameters OK 14:36:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:22 Set A/D data flow result=40 14:36:22 Set A/D channel type result=40 14:36:22 Set A/D encoding result=40 14:36:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:22 Set channel filter=0.000000e+000 result=40 14:36:22 Config A/D Result=40 14:36:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:22 Get A/D filter: -9.255963e+061 result=40 14:36:22 Get A/D value=-858993460 result=40 14:36:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.509998 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:22 Aux= 14:36:22 Message to Camera, serial 145654 queued 14:36:59 Received message from Master: op=PointingHead serial=145667 14:36:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:36:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:36:59 Point started: ret=0 14:36:59 point_skyscan result=0 14:37:00 Check angles 14:37:00 SkyScan query 14:37:00 SkyScan query done: ret=0 az=63.9<-4260 ze=66.555<-7563 Statuses=0009 0008 14:37:00 Msec=0 True Az=63.9 Ze=66.555 Az status=0009 Ze status=0008 14:37:01 Check angles 14:37:01 SkyScan query 14:37:01 SkyScan query done: ret=0 az=81.435<-5429 ze=66.495<-7567 Statuses=0009 0008 14:37:01 Msec=750 True Az=81.435 Ze=66.495 Az status=0009 Ze status=0008 14:37:01 Check angles 14:37:01 SkyScan query 14:37:02 SkyScan query done: ret=0 az=98.94<-6596 ze=66.495<-7567 Statuses=0009 0008 14:37:02 Msec=1500 True Az=98.94 Ze=66.495 Az status=0009 Ze status=0008 14:37:02 Check angles 14:37:02 SkyScan query 14:37:03 SkyScan query done: ret=0 az=116.43<-7762 ze=66.495<-7567 Statuses=0009 0008 14:37:03 Msec=2250 True Az=116.43 Ze=66.495 Az status=0009 Ze status=0008 14:37:03 Check angles 14:37:03 SkyScan query 14:37:03 SkyScan query done: ret=0 az=133.875<-8925 ze=66.495<-7567 Statuses=0009 0008 14:37:03 Msec=3000 True Az=133.875 Ze=66.495 Az status=0009 Ze status=0008 14:37:04 Check angles 14:37:04 SkyScan query 14:37:04 SkyScan query done: ret=0 az=151.245<-10083 ze=66.495<-7567 Statuses=0009 0008 14:37:04 Msec=3750 True Az=151.245 Ze=66.495 Az status=0009 Ze status=0008 14:37:04 Check angles 14:37:04 SkyScan query 14:37:05 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 14:37:05 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 14:37:05 Message to Master queued w/err=0: serial=145667 error=0 14:37:10 Received message from Master: op=Filter serial=145668 14:37:10 Color wheel filter change from 0 to 0 14:37:10 FLIGetFilterPos err=0 currentPosition=0 14:37:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:10 Filter is already there-color wheel unchanged 14:37:10 Received message from Master: op=Shutter serial=145669 14:37:10 Shutter LASER close 14:37:10 Received message from Camera: op=State serial=145671 14:37:10 GetSingleValue result=40 Value=cccccccc 14:37:10 SkyScan query 14:37:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:37:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:11 Parameters OK 14:37:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:11 Set A/D data flow result=40 14:37:11 Set A/D channel type result=40 14:37:11 Set A/D encoding result=40 14:37:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:11 Set channel filter=0.000000e+000 result=40 14:37:11 Config A/D Result=40 14:37:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:11 Get A/D filter: -9.255963e+061 result=40 14:37:11 Get A/D value=-858993460 result=40 14:37:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:11 Parameters OK 14:37:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:11 Set A/D data flow result=40 14:37:11 Set A/D channel type result=40 14:37:11 Set A/D encoding result=40 14:37:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:11 Set channel filter=0.000000e+000 result=40 14:37:11 Config A/D Result=40 14:37:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:11 Get A/D filter: -9.255963e+061 result=40 14:37:11 Get A/D value=-858993460 result=40 14:37:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:11 Aux= 14:37:11 Message to Camera, serial 145671 queued 14:37:48 Received message from Master: op=PointingHead serial=145684 14:37:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:37:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:37:48 Point started: ret=0 14:37:48 point_skyscan result=0 14:37:49 Check angles 14:37:49 SkyScan query 14:37:49 SkyScan query done: ret=0 az=135.075<-9005 ze=36.78<-9548 Statuses=0009 0009 14:37:49 Msec=0 True Az=135.075 Ze=36.78 Az status=0009 Ze status=0009 14:37:49 Check angles 14:37:49 SkyScan query 14:37:50 SkyScan query done: ret=0 az=117.57<-7838 ze=15.84<-10944 Statuses=0009 0009 14:37:50 Msec=750 True Az=117.57 Ze=15.84 Az status=0009 Ze status=0009 14:37:50 Check angles 14:37:50 SkyScan query 14:37:51 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.115<-12341 Statuses=0009 0009 14:37:51 Msec=1500 True Az=100.2 Ze=-5.115 Az status=0009 Ze status=0009 14:37:51 Check angles 14:37:51 SkyScan query 14:37:51 SkyScan query done: ret=0 az=82.695<-5513 ze=-26.1<-13740 Statuses=0009 0009 14:37:51 Msec=2250 True Az=82.695 Ze=-26.1 Az status=0009 Ze status=0009 14:37:52 Check angles 14:37:52 SkyScan query 14:37:52 SkyScan query done: ret=0 az=65.175<-4345 ze=-38.595<-14573 Statuses=0009 0008 14:37:52 Msec=3000 True Az=65.175 Ze=-38.595 Az status=0009 Ze status=0008 14:37:52 Check angles 14:37:52 SkyScan query 14:37:53 SkyScan query done: ret=0 az=47.715<-3181 ze=-38.52<-14568 Statuses=0009 0008 14:37:53 Msec=3750 True Az=47.715 Ze=-38.52 Az status=0009 Ze status=0008 14:37:53 Check angles 14:37:53 SkyScan query 14:37:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:37:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:37:54 Message to Master queued w/err=0: serial=145684 error=0 14:37:59 Received message from Master: op=Filter serial=145685 14:37:59 Color wheel filter change from 0 to 0 14:37:59 FLIGetFilterPos err=0 currentPosition=0 14:37:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:59 Filter is already there-color wheel unchanged 14:37:59 Received message from Master: op=Shutter serial=145686 14:37:59 Shutter LASER close 14:37:59 Received message from Camera: op=State serial=145688 14:37:59 GetSingleValue result=40 Value=cccccccc 14:37:59 SkyScan query 14:37:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:37:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:59 Parameters OK 14:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:59 Set A/D data flow result=40 14:37:59 Set A/D channel type result=40 14:37:59 Set A/D encoding result=40 14:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:59 Set channel filter=0.000000e+000 result=40 14:37:59 Config A/D Result=40 14:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:59 Get A/D filter: -9.255963e+061 result=40 14:37:59 Get A/D value=-858993460 result=40 14:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:59 Parameters OK 14:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:59 Set A/D data flow result=40 14:37:59 Set A/D channel type result=40 14:37:59 Set A/D encoding result=40 14:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:59 Set channel filter=0.000000e+000 result=40 14:37:59 Config A/D Result=40 14:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:59 Get A/D filter: -9.255963e+061 result=40 14:37:59 Get A/D value=-858993460 result=40 14:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:59 Aux= 14:37:59 Message to Camera, serial 145688 queued 14:38:35 Received message from Master: op=PointingHead serial=145700 14:38:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:38:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:38:36 Point started: ret=0 14:38:36 point_skyscan result=0 14:38:36 Check angles 14:38:36 SkyScan query 14:38:37 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.37<-16558 Statuses=0009 0009 14:38:37 Msec=0 True Az=63.99 Ze=-68.37 Az status=0009 Ze status=0009 14:38:37 Check angles 14:38:37 SkyScan query 14:38:38 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.34<-17956 Statuses=0009 0009 14:38:38 Msec=750 True Az=81.54 Ze=-89.34 Az status=0009 Ze status=0009 14:38:38 Check angles 14:38:38 SkyScan query 14:38:39 SkyScan query done: ret=0 az=98.91<-6594 ze=-110.265<-19351 Statuses=0009 0009 14:38:39 Msec=1500 True Az=98.91 Ze=-110.265 Az status=0009 Ze status=0009 14:38:39 Check angles 14:38:39 SkyScan query 14:38:39 SkyScan query done: ret=0 az=116.385<-7759 ze=-131.205<-20747 Statuses=0009 0009 14:38:39 Msec=2250 True Az=116.385 Ze=-131.205 Az status=0009 Ze status=0009 14:38:39 Check angles 14:38:39 SkyScan query 14:38:40 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 14:38:40 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 14:38:40 Check angles 14:38:40 SkyScan query 14:38:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 14:38:41 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 14:38:41 Message to Master queued w/err=0: serial=145700 error=0 14:38:46 Received message from Master: op=Filter serial=145701 14:38:46 Color wheel filter change from 0 to 0 14:38:46 FLIGetFilterPos err=0 currentPosition=0 14:38:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:46 Filter is already there-color wheel unchanged 14:38:46 Received message from Master: op=Shutter serial=145702 14:38:46 Shutter LASER close 14:38:46 Received message from Camera: op=State serial=145704 14:38:46 GetSingleValue result=40 Value=cccccccc 14:38:46 SkyScan query 14:38:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:38:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:47 Parameters OK 14:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:47 Set A/D data flow result=40 14:38:47 Set A/D channel type result=40 14:38:47 Set A/D encoding result=40 14:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:47 Set channel filter=0.000000e+000 result=40 14:38:47 Config A/D Result=40 14:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:47 Get A/D filter: -9.255963e+061 result=40 14:38:47 Get A/D value=-858993460 result=40 14:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:47 Parameters OK 14:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:47 Set A/D data flow result=40 14:38:47 Set A/D channel type result=40 14:38:47 Set A/D encoding result=40 14:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:47 Set channel filter=0.000000e+000 result=40 14:38:47 Config A/D Result=40 14:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:47 Get A/D filter: -9.255963e+061 result=40 14:38:47 Get A/D value=-858993460 result=40 14:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:47 Aux= 14:38:47 Message to Camera, serial 145704 queued 14:39:23 Received message from Master: op=PointingHead serial=145717 14:39:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:39:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:39:24 Point started: ret=0 14:39:24 point_skyscan result=0 14:39:25 Check angles 14:39:25 SkyScan query 14:39:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 14:39:25 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 14:39:25 Check angles 14:39:25 SkyScan query 14:39:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:39:26 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:39:26 Message to Master queued w/err=0: serial=145717 error=0 14:39:31 Received message from Master: op=Filter serial=145718 14:39:31 Color wheel filter change from 0 to 0 14:39:31 FLIGetFilterPos err=0 currentPosition=0 14:39:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:31 Filter is already there-color wheel unchanged 14:39:31 Received message from Master: op=Shutter serial=145719 14:39:31 Shutter LASER open 14:39:31 Received message from Camera: op=State serial=145721 14:39:31 GetSingleValue result=40 Value=cccccccc 14:39:31 SkyScan query 14:39:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:39:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:32 Parameters OK 14:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:32 Set A/D data flow result=40 14:39:32 Set A/D channel type result=40 14:39:32 Set A/D encoding result=40 14:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:32 Set channel filter=0.000000e+000 result=40 14:39:32 Config A/D Result=40 14:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:32 Get A/D filter: -9.255963e+061 result=40 14:39:32 Get A/D value=-858993460 result=40 14:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:32 Parameters OK 14:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:32 Set A/D data flow result=40 14:39:32 Set A/D channel type result=40 14:39:32 Set A/D encoding result=40 14:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:32 Set channel filter=0.000000e+000 result=40 14:39:32 Config A/D Result=40 14:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:32 Get A/D filter: -9.255963e+061 result=40 14:39:32 Get A/D value=-858993460 result=40 14:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:32 Aux= 14:39:32 Message to Camera, serial 145721 queued 14:39:40 Received message from Master: op=Shutter serial=145731 14:39:40 Shutter LASER close 14:39:41 Received message from Master: op=PointingHead serial=145735 14:39:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:39:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:39:41 Point started: ret=0 14:39:41 point_skyscan result=0 14:39:42 Check angles 14:39:42 SkyScan query 14:39:42 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.98<-21532 Statuses=0009 0009 14:39:42 Msec=0 True Az=136.215 Ze=-142.98 Az status=0009 Ze status=0009 14:39:43 Check angles 14:39:43 SkyScan query 14:39:43 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.965<-20131 Statuses=0009 0009 14:39:43 Msec=750 True Az=153.765 Ze=-121.965 Az status=0009 Ze status=0009 14:39:43 Check angles 14:39:43 SkyScan query 14:39:44 SkyScan query done: ret=0 az=171.21<-11414 ze=-100.965<-18731 Statuses=0009 0009 14:39:44 Msec=1500 True Az=171.21 Ze=-100.965 Az status=0009 Ze status=0009 14:39:44 Check angles 14:39:44 SkyScan query 14:39:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.605<-17307 Statuses=0008 0009 14:39:45 Msec=2250 True Az=176.01 Ze=-79.605 Az status=0008 Ze status=0009 14:39:45 Check angles 14:39:45 SkyScan query 14:39:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.62<-15908 Statuses=0008 0009 14:39:46 Msec=3000 True Az=176.01 Ze=-58.62 Az status=0008 Ze status=0009 14:39:46 Check angles 14:39:46 SkyScan query 14:39:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:39:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:39:46 Message to Master queued w/err=0: serial=145735 error=0 14:39:51 Received message from Master: op=Filter serial=145736 14:39:51 Color wheel filter change from 0 to 0 14:39:51 FLIGetFilterPos err=0 currentPosition=0 14:39:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:51 Filter is already there-color wheel unchanged 14:39:51 Received message from Master: op=Shutter serial=145737 14:39:51 Shutter LASER close 14:39:52 Received message from Camera: op=State serial=145739 14:39:52 GetSingleValue result=40 Value=cccccccc 14:39:52 SkyScan query 14:39:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:39:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:52 Parameters OK 14:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:52 Set A/D data flow result=40 14:39:52 Set A/D channel type result=40 14:39:52 Set A/D encoding result=40 14:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:52 Set channel filter=0.000000e+000 result=40 14:39:52 Config A/D Result=40 14:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:52 Get A/D filter: -9.255963e+061 result=40 14:39:52 Get A/D value=-858993460 result=40 14:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:52 Parameters OK 14:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:52 Set A/D data flow result=40 14:39:52 Set A/D channel type result=40 14:39:52 Set A/D encoding result=40 14:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:52 Set channel filter=0.000000e+000 result=40 14:39:52 Config A/D Result=40 14:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:52 Get A/D filter: -9.255963e+061 result=40 14:39:52 Get A/D value=-858993460 result=40 14:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:52 Aux= 14:39:52 Message to Camera, serial 145739 queued 14:40:29 Received message from Master: op=PointingHead serial=145752 14:40:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:40:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:40:29 Point started: ret=0 14:40:29 point_skyscan result=0 14:40:30 Check angles 14:40:30 SkyScan query 14:40:31 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.005<-13467 Statuses=0009 0009 14:40:31 Msec=0 True Az=153.21 Ze=-22.005 Az status=0009 Ze status=0009 14:40:31 Check angles 14:40:31 SkyScan query 14:40:31 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.6<-12040 Statuses=0009 0009 14:40:31 Msec=750 True Az=135.39 Ze=-0.6 Az status=0009 Ze status=0009 14:40:32 Check angles 14:40:32 SkyScan query 14:40:32 SkyScan query done: ret=0 az=117.48<-7832 ze=20.85<-10610 Statuses=0009 0009 14:40:32 Msec=1500 True Az=117.48 Ze=20.85 Az status=0009 Ze status=0009 14:40:32 Check angles 14:40:32 SkyScan query 14:40:33 SkyScan query done: ret=0 az=100.125<-6675 ze=41.76<-9216 Statuses=0009 0009 14:40:33 Msec=2250 True Az=100.125 Ze=41.76 Az status=0009 Ze status=0009 14:40:33 Check angles 14:40:33 SkyScan query 14:40:34 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 14:40:34 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 14:40:34 Check angles 14:40:34 SkyScan query 14:40:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:40:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:40:35 Message to Master queued w/err=0: serial=145752 error=0 14:40:40 Received message from Master: op=Filter serial=145753 14:40:40 Color wheel filter change from 0 to 0 14:40:40 FLIGetFilterPos err=0 currentPosition=0 14:40:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:40 Filter is already there-color wheel unchanged 14:40:40 Received message from Master: op=Shutter serial=145754 14:40:40 Shutter LASER close 14:40:40 Received message from Camera: op=State serial=145756 14:40:40 GetSingleValue result=40 Value=cccccccc 14:40:40 SkyScan query 14:40:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:40:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:40 Parameters OK 14:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:40 Set A/D data flow result=40 14:40:40 Set A/D channel type result=40 14:40:40 Set A/D encoding result=40 14:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:40 Set channel filter=0.000000e+000 result=40 14:40:40 Config A/D Result=40 14:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:40 Get A/D filter: -9.255963e+061 result=40 14:40:40 Get A/D value=-858993460 result=40 14:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:40 Parameters OK 14:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:40 Set A/D data flow result=40 14:40:40 Set A/D channel type result=40 14:40:40 Set A/D encoding result=40 14:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:40 Set channel filter=0.000000e+000 result=40 14:40:40 Config A/D Result=40 14:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:40 Get A/D filter: -9.255963e+061 result=40 14:40:40 Get A/D value=-858993460 result=40 14:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:40 Aux= 14:40:40 Message to Camera, serial 145756 queued 14:41:17 Received message from Master: op=PointingHead serial=145769 14:41:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:41:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:41:17 Point started: ret=0 14:41:17 point_skyscan result=0 14:41:18 Check angles 14:41:18 SkyScan query 14:41:19 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 14:41:19 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 14:41:19 Check angles 14:41:19 SkyScan query 14:41:20 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 14:41:20 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 14:41:20 Check angles 14:41:20 SkyScan query 14:41:20 SkyScan query done: ret=0 az=143.76<-9584 ze=38.505<-9433 Statuses=0009 0008 14:41:20 Msec=1500 True Az=143.76 Ze=38.505 Az status=0009 Ze status=0008 14:41:20 Check angles 14:41:20 SkyScan query 14:41:21 SkyScan query done: ret=0 az=161.265<-10751 ze=38.505<-9433 Statuses=0009 0008 14:41:21 Msec=2250 True Az=161.265 Ze=38.505 Az status=0009 Ze status=0008 14:41:21 Check angles 14:41:21 SkyScan query 14:41:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:41:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:41:22 Check angles 14:41:22 SkyScan query 14:41:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:41:23 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:41:23 Message to Master queued w/err=0: serial=145769 error=0 14:41:28 Received message from Master: op=Filter serial=145770 14:41:28 Color wheel filter change from 0 to 0 14:41:28 FLIGetFilterPos err=0 currentPosition=0 14:41:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:28 Filter is already there-color wheel unchanged 14:41:28 Received message from Master: op=Shutter serial=145771 14:41:28 Shutter LASER close 14:41:28 Received message from Camera: op=State serial=145773 14:41:28 GetSingleValue result=40 Value=cccccccc 14:41:28 SkyScan query 14:41:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:41:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:28 Parameters OK 14:41:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:28 Set A/D data flow result=40 14:41:28 Set A/D channel type result=40 14:41:28 Set A/D encoding result=40 14:41:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:28 Set channel filter=0.000000e+000 result=40 14:41:28 Config A/D Result=40 14:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:28 Get A/D filter: -9.255963e+061 result=40 14:41:28 Get A/D value=-858993460 result=40 14:41:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:28 Parameters OK 14:41:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:28 Set A/D data flow result=40 14:41:28 Set A/D channel type result=40 14:41:28 Set A/D encoding result=40 14:41:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:28 Set channel filter=0.000000e+000 result=40 14:41:28 Config A/D Result=40 14:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:28 Get A/D filter: -9.255963e+061 result=40 14:41:28 Get A/D value=-858993460 result=40 14:41:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:28 Aux= 14:41:28 Message to Camera, serial 145773 queued 14:42:05 Received message from Master: op=PointingHead serial=145786 14:42:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:42:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:42:06 Point started: ret=0 14:42:06 point_skyscan result=0 14:42:06 Check angles 14:42:06 SkyScan query 14:42:07 SkyScan query done: ret=0 az=152.775<-10185 ze=8.31<-11446 Statuses=0009 0009 14:42:07 Msec=0 True Az=152.775 Ze=8.31 Az status=0009 Ze status=0009 14:42:07 Check angles 14:42:07 SkyScan query 14:42:08 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.57<-12838 Statuses=0009 0009 14:42:08 Msec=750 True Az=135.315 Ze=-12.57 Az status=0009 Ze status=0009 14:42:08 Check angles 14:42:08 SkyScan query 14:42:08 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.585<-14239 Statuses=0009 0009 14:42:08 Msec=1500 True Az=117.765 Ze=-33.585 Az status=0009 Ze status=0009 14:42:09 Check angles 14:42:09 SkyScan query 14:42:09 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.585<-15439 Statuses=0009 0009 14:42:09 Msec=2250 True Az=100.02 Ze=-51.585 Az status=0009 Ze status=0009 14:42:09 Check angles 14:42:09 SkyScan query 14:42:10 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 14:42:10 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 14:42:10 Check angles 14:42:10 SkyScan query 14:42:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:42:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:42:11 Message to Master queued w/err=0: serial=145786 error=0 14:42:16 Received message from Master: op=Filter serial=145787 14:42:16 Color wheel filter change from 0 to 0 14:42:16 FLIGetFilterPos err=0 currentPosition=0 14:42:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:16 Filter is already there-color wheel unchanged 14:42:16 Received message from Master: op=Shutter serial=145788 14:42:16 Shutter LASER close 14:42:16 Received message from Camera: op=State serial=145790 14:42:16 GetSingleValue result=40 Value=cccccccc 14:42:16 SkyScan query 14:42:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:42:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:16 Parameters OK 14:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:16 Set A/D data flow result=40 14:42:16 Set A/D channel type result=40 14:42:16 Set A/D encoding result=40 14:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:16 Set channel filter=0.000000e+000 result=40 14:42:16 Config A/D Result=40 14:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:16 Get A/D filter: -9.255963e+061 result=40 14:42:16 Get A/D value=-858993460 result=40 14:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:16 Parameters OK 14:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:16 Set A/D data flow result=40 14:42:16 Set A/D channel type result=40 14:42:16 Set A/D encoding result=40 14:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:16 Set channel filter=0.000000e+000 result=40 14:42:16 Config A/D Result=40 14:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:16 Get A/D filter: -9.255963e+061 result=40 14:42:16 Get A/D value=-858993460 result=40 14:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:16 Aux= 14:42:16 Message to Camera, serial 145790 queued 14:42:53 Received message from Master: op=PointingHead serial=145803 14:42:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:42:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:42:54 Point started: ret=0 14:42:54 point_skyscan result=0 14:42:54 Check angles 14:42:54 SkyScan query 14:42:55 SkyScan query done: ret=0 az=109.32<-7288 ze=-81.63<-17442 Statuses=0009 0009 14:42:55 Msec=0 True Az=109.32 Ze=-81.63 Az status=0009 Ze status=0009 14:42:55 Check angles 14:42:55 SkyScan query 14:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.99<-18866 Statuses=0008 0009 14:42:56 Msec=750 True Az=112.995 Ze=-102.99 Az status=0008 Ze status=0009 14:42:56 Check angles 14:42:56 SkyScan query 14:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.975<-20265 Statuses=0008 0009 14:42:56 Msec=1500 True Az=112.995 Ze=-123.975 Az status=0008 Ze status=0009 14:42:57 Check angles 14:42:57 SkyScan query 14:42:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.885<-21659 Statuses=0008 0009 14:42:57 Msec=2250 True Az=112.995 Ze=-144.885 Az status=0008 Ze status=0009 14:42:57 Check angles 14:42:57 SkyScan query 14:42:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.305<-23087 Statuses=0008 0009 14:42:58 Msec=3000 True Az=112.995 Ze=-166.305 Az status=0008 Ze status=0009 14:42:58 Check angles 14:42:58 SkyScan query 14:42:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:42:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:42:59 Message to Master queued w/err=0: serial=145803 error=0 14:43:04 Received message from Master: op=Filter serial=145804 14:43:04 Color wheel filter change from 0 to 0 14:43:04 FLIGetFilterPos err=0 currentPosition=0 14:43:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:04 Filter is already there-color wheel unchanged 14:43:04 Received message from Master: op=Shutter serial=145805 14:43:04 Shutter LASER open 14:43:04 Received message from Camera: op=State serial=145807 14:43:04 GetSingleValue result=40 Value=cccccccc 14:43:04 SkyScan query 14:43:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:43:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:05 Parameters OK 14:43:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:05 Set A/D data flow result=40 14:43:05 Set A/D channel type result=40 14:43:05 Set A/D encoding result=40 14:43:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:05 Set channel filter=0.000000e+000 result=40 14:43:05 Config A/D Result=40 14:43:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:05 Get A/D filter: -9.255963e+061 result=40 14:43:05 Get A/D value=-858993460 result=40 14:43:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:05 Parameters OK 14:43:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:05 Set A/D data flow result=40 14:43:05 Set A/D channel type result=40 14:43:05 Set A/D encoding result=40 14:43:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:05 Set channel filter=0.000000e+000 result=40 14:43:05 Config A/D Result=40 14:43:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:05 Get A/D filter: -9.255963e+061 result=40 14:43:05 Get A/D value=-858993460 result=40 14:43:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:05 Aux= 14:43:05 Message to Camera, serial 145807 queued 14:43:13 Received message from Master: op=Shutter serial=145817 14:43:13 Shutter LASER close 14:43:14 Received message from Master: op=PointingHead serial=145821 14:43:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:43:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:43:14 Point started: ret=0 14:43:14 point_skyscan result=0 14:43:15 Check angles 14:43:15 SkyScan query 14:43:15 SkyScan query done: ret=0 az=90.09<-6006 ze=157.44<-1504 Statuses=0009 0009 14:43:15 Msec=0 True Az=90.09 Ze=157.44 Az status=0009 Ze status=0009 14:43:15 Check angles 14:43:15 SkyScan query 14:43:16 SkyScan query done: ret=0 az=72.615<-4841 ze=136.44<-2904 Statuses=0009 0009 14:43:16 Msec=750 True Az=72.615 Ze=136.44 Az status=0009 Ze status=0009 14:43:16 Check angles 14:43:16 SkyScan query 14:43:17 SkyScan query done: ret=0 az=54.705<-3647 ze=115.065<-4329 Statuses=0009 0009 14:43:17 Msec=1500 True Az=54.705 Ze=115.065 Az status=0009 Ze status=0009 14:43:17 Check angles 14:43:17 SkyScan query 14:43:18 SkyScan query done: ret=0 az=40.98<-2732 ze=93.69<-5754 Statuses=0009 0009 14:43:18 Msec=2250 True Az=40.98 Ze=93.69 Az status=0009 Ze status=0009 14:43:18 Check angles 14:43:18 SkyScan query 14:43:18 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 14:43:18 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 14:43:18 Check angles 14:43:18 SkyScan query 14:43:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 14:43:19 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 14:43:19 Check angles 14:43:19 SkyScan query 14:43:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:43:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:43:20 Message to Master queued w/err=0: serial=145821 error=0 14:43:25 Received message from Master: op=Filter serial=145822 14:43:25 Color wheel filter change from 0 to 0 14:43:25 FLIGetFilterPos err=0 currentPosition=0 14:43:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:25 Filter is already there-color wheel unchanged 14:43:25 Received message from Master: op=Shutter serial=145823 14:43:25 Shutter LASER close 14:43:25 Received message from Camera: op=State serial=145825 14:43:25 GetSingleValue result=40 Value=cccccccc 14:43:25 SkyScan query 14:43:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:43:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:26 Parameters OK 14:43:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:26 Set A/D data flow result=40 14:43:26 Set A/D channel type result=40 14:43:26 Set A/D encoding result=40 14:43:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:26 Set channel filter=0.000000e+000 result=40 14:43:26 Config A/D Result=40 14:43:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:26 Get A/D filter: -9.255963e+061 result=40 14:43:26 Get A/D value=-858993460 result=40 14:43:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:26 Parameters OK 14:43:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:26 Set A/D data flow result=40 14:43:26 Set A/D channel type result=40 14:43:26 Set A/D encoding result=40 14:43:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:26 Set channel filter=0.000000e+000 result=40 14:43:26 Config A/D Result=40 14:43:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:26 Get A/D filter: -9.255963e+061 result=40 14:43:26 Get A/D value=-858993460 result=40 14:43:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:26 Aux= 14:43:26 Message to Camera, serial 145825 queued 14:44:03 Received message from Master: op=PointingHead serial=145838 14:44:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:44:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:44:03 Point started: ret=0 14:44:03 point_skyscan result=0 14:44:04 Check angles 14:44:04 SkyScan query 14:44:04 SkyScan query done: ret=0 az=63.99<-4266 ze=66.54<-7564 Statuses=0009 0008 14:44:04 Msec=0 True Az=63.99 Ze=66.54 Az status=0009 Ze status=0008 14:44:04 Check angles 14:44:04 SkyScan query 14:44:05 SkyScan query done: ret=0 az=81.885<-5459 ze=66.51<-7566 Statuses=0009 0008 14:44:05 Msec=750 True Az=81.885 Ze=66.51 Az status=0009 Ze status=0008 14:44:05 Check angles 14:44:05 SkyScan query 14:44:06 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 14:44:06 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 14:44:06 Check angles 14:44:06 SkyScan query 14:44:06 SkyScan query done: ret=0 az=116.88<-7792 ze=66.495<-7567 Statuses=0009 0008 14:44:06 Msec=2250 True Az=116.88 Ze=66.495 Az status=0009 Ze status=0008 14:44:07 Check angles 14:44:07 SkyScan query 14:44:07 SkyScan query done: ret=0 az=134.67<-8978 ze=66.495<-7567 Statuses=0009 0008 14:44:07 Msec=3000 True Az=134.67 Ze=66.495 Az status=0009 Ze status=0008 14:44:07 Check angles 14:44:07 SkyScan query 14:44:08 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 14:44:08 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 14:44:08 Check angles 14:44:08 SkyScan query 14:44:09 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 14:44:09 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 14:44:09 Message to Master queued w/err=0: serial=145838 error=0 14:44:14 Received message from Master: op=Filter serial=145839 14:44:14 Color wheel filter change from 0 to 0 14:44:14 FLIGetFilterPos err=0 currentPosition=0 14:44:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:14 Filter is already there-color wheel unchanged 14:44:14 Received message from Master: op=Shutter serial=145840 14:44:14 Shutter LASER close 14:44:14 Received message from Camera: op=State serial=145842 14:44:14 GetSingleValue result=40 Value=cccccccc 14:44:14 SkyScan query 14:44:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:44:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:15 Parameters OK 14:44:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:15 Set A/D data flow result=40 14:44:15 Set A/D channel type result=40 14:44:15 Set A/D encoding result=40 14:44:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:15 Set channel filter=0.000000e+000 result=40 14:44:15 Config A/D Result=40 14:44:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:15 Get A/D filter: -9.255963e+061 result=40 14:44:15 Get A/D value=-858993460 result=40 14:44:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:15 Parameters OK 14:44:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:15 Set A/D data flow result=40 14:44:15 Set A/D channel type result=40 14:44:15 Set A/D encoding result=40 14:44:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:15 Set channel filter=0.000000e+000 result=40 14:44:15 Config A/D Result=40 14:44:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:15 Get A/D filter: -9.255963e+061 result=40 14:44:15 Get A/D value=-858993460 result=40 14:44:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:15 Aux= 14:44:15 Message to Camera, serial 145842 queued 14:44:51 Received message from Master: op=PointingHead serial=145855 14:44:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:44:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:44:52 Point started: ret=0 14:44:52 point_skyscan result=0 14:44:52 Check angles 14:44:52 SkyScan query 14:44:53 SkyScan query done: ret=0 az=135.12<-9008 ze=36.9<-9540 Statuses=0009 0009 14:44:53 Msec=0 True Az=135.12 Ze=36.9 Az status=0009 Ze status=0009 14:44:53 Check angles 14:44:53 SkyScan query 14:44:54 SkyScan query done: ret=0 az=117.255<-7817 ze=15.585<-10961 Statuses=0009 0009 14:44:54 Msec=750 True Az=117.255 Ze=15.585 Az status=0009 Ze status=0009 14:44:54 Check angles 14:44:54 SkyScan query 14:44:55 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.445<-12363 Statuses=0009 0009 14:44:55 Msec=1500 True Az=99.84 Ze=-5.445 Az status=0009 Ze status=0009 14:44:55 Check angles 14:44:55 SkyScan query 14:44:55 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.385<-13759 Statuses=0009 0009 14:44:55 Msec=2250 True Az=82.335 Ze=-26.385 Az status=0009 Ze status=0009 14:44:56 Check angles 14:44:56 SkyScan query 14:44:56 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.595<-14573 Statuses=0009 0008 14:44:56 Msec=3000 True Az=64.485 Ze=-38.595 Az status=0009 Ze status=0008 14:44:56 Check angles 14:44:56 SkyScan query 14:44:57 SkyScan query done: ret=0 az=46.575<-3105 ze=-38.52<-14568 Statuses=0009 0008 14:44:57 Msec=3750 True Az=46.575 Ze=-38.52 Az status=0009 Ze status=0008 14:44:57 Check angles 14:44:57 SkyScan query 14:44:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:44:58 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:44:58 Message to Master queued w/err=0: serial=145855 error=0 14:45:03 Received message from Master: op=Filter serial=145856 14:45:03 Color wheel filter change from 0 to 0 14:45:03 FLIGetFilterPos err=0 currentPosition=0 14:45:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:03 Filter is already there-color wheel unchanged 14:45:03 Received message from Master: op=Shutter serial=145857 14:45:03 Shutter LASER close 14:45:03 Received message from Camera: op=State serial=145859 14:45:03 GetSingleValue result=40 Value=cccccccc 14:45:03 SkyScan query 14:45:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:45:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:03 Parameters OK 14:45:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:03 Set A/D data flow result=40 14:45:03 Set A/D channel type result=40 14:45:03 Set A/D encoding result=40 14:45:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:03 Set channel filter=0.000000e+000 result=40 14:45:03 Config A/D Result=40 14:45:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:03 Get A/D filter: -9.255963e+061 result=40 14:45:03 Get A/D value=-858993460 result=40 14:45:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:03 Parameters OK 14:45:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:03 Set A/D data flow result=40 14:45:03 Set A/D channel type result=40 14:45:03 Set A/D encoding result=40 14:45:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:03 Set channel filter=0.000000e+000 result=40 14:45:03 Config A/D Result=40 14:45:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:03 Get A/D filter: -9.255963e+061 result=40 14:45:03 Get A/D value=-858993460 result=40 14:45:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:03 Aux= 14:45:03 Message to Camera, serial 145859 queued 14:45:27 Received message from Master: op=Identify serial=145860 14:45:40 Received message from Master: op=PointingHead serial=145875 14:45:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:45:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:45:41 Point started: ret=0 14:45:41 point_skyscan result=0 14:45:41 Check angles 14:45:41 SkyScan query [UTC 2018-12-14 14:45:42] 14:45:42 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.025<-16535 Statuses=0009 0009 14:45:42 Msec=0 True Az=63.84 Ze=-68.025 Az status=0009 Ze status=0009 14:45:42 Check angles 14:45:42 SkyScan query 14:45:43 SkyScan query done: ret=0 az=81.3<-5420 ze=-88.995<-17933 Statuses=0009 0009 14:45:43 Msec=750 True Az=81.3 Ze=-88.995 Az status=0009 Ze status=0009 14:45:43 Check angles 14:45:43 SkyScan query 14:45:43 SkyScan query done: ret=0 az=98.85<-6590 ze=-109.89<-19326 Statuses=0009 0009 14:45:43 Msec=1500 True Az=98.85 Ze=-109.89 Az status=0009 Ze status=0009 14:45:44 Check angles 14:45:44 SkyScan query 14:45:44 SkyScan query done: ret=0 az=116.325<-7755 ze=-130.905<-20727 Statuses=0009 0009 14:45:44 Msec=2250 True Az=116.325 Ze=-130.905 Az status=0009 Ze status=0009 14:45:44 Check angles 14:45:44 SkyScan query 14:45:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 14:45:45 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 14:45:45 Check angles 14:45:45 SkyScan query 14:45:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 14:45:46 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 14:45:46 Message to Master queued w/err=0: serial=145875 error=0 14:45:51 Received message from Master: op=Filter serial=145876 14:45:51 Color wheel filter change from 0 to 0 14:45:51 FLIGetFilterPos err=0 currentPosition=0 14:45:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:51 Filter is already there-color wheel unchanged 14:45:51 Received message from Master: op=Shutter serial=145877 14:45:51 Shutter LASER close 14:45:51 Received message from Camera: op=State serial=145879 14:45:51 GetSingleValue result=40 Value=cccccccc 14:45:51 SkyScan query 14:45:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:45:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:51 Parameters OK 14:45:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:51 Set A/D data flow result=40 14:45:51 Set A/D channel type result=40 14:45:51 Set A/D encoding result=40 14:45:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:51 Set channel filter=0.000000e+000 result=40 14:45:51 Config A/D Result=40 14:45:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:51 Get A/D filter: -9.255963e+061 result=40 14:45:51 Get A/D value=-858993460 result=40 14:45:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:51 Parameters OK 14:45:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:51 Set A/D data flow result=40 14:45:51 Set A/D channel type result=40 14:45:51 Set A/D encoding result=40 14:45:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:51 Set channel filter=0.000000e+000 result=40 14:45:51 Config A/D Result=40 14:45:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:51 Get A/D filter: -9.255963e+061 result=40 14:45:51 Get A/D value=-858993460 result=40 14:45:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:51 Aux= 14:45:51 Message to Camera, serial 145879 queued 14:46:28 Received message from Master: op=PointingHead serial=145892 14:46:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:46:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:46:29 Point started: ret=0 14:46:29 point_skyscan result=0 14:46:29 Check angles 14:46:29 SkyScan query 14:46:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 14:46:30 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 14:46:30 Check angles 14:46:30 SkyScan query 14:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:46:31 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:46:31 Message to Master queued w/err=0: serial=145892 error=0 14:46:36 Received message from Master: op=Filter serial=145893 14:46:36 Color wheel filter change from 0 to 0 14:46:36 FLIGetFilterPos err=0 currentPosition=0 14:46:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:36 Filter is already there-color wheel unchanged 14:46:36 Received message from Master: op=Shutter serial=145894 14:46:36 Shutter LASER open 14:46:36 Received message from Camera: op=State serial=145896 14:46:36 GetSingleValue result=40 Value=cccccccc 14:46:36 SkyScan query 14:46:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:46:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:37 Parameters OK 14:46:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:37 Set A/D data flow result=40 14:46:37 Set A/D channel type result=40 14:46:37 Set A/D encoding result=40 14:46:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:37 Set channel filter=0.000000e+000 result=40 14:46:37 Config A/D Result=40 14:46:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:37 Get A/D filter: -9.255963e+061 result=40 14:46:37 Get A/D value=-858993460 result=40 14:46:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:37 Parameters OK 14:46:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:37 Set A/D data flow result=40 14:46:37 Set A/D channel type result=40 14:46:37 Set A/D encoding result=40 14:46:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:37 Set channel filter=0.000000e+000 result=40 14:46:37 Config A/D Result=40 14:46:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:37 Get A/D filter: -9.255963e+061 result=40 14:46:37 Get A/D value=-858993460 result=40 14:46:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:37 Aux= 14:46:37 Message to Camera, serial 145896 queued 14:46:45 Received message from Master: op=Shutter serial=145906 14:46:45 Shutter LASER close 14:46:46 Received message from Master: op=PointingHead serial=145910 14:46:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:46:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:46:46 Point started: ret=0 14:46:46 point_skyscan result=0 14:46:47 Check angles 14:46:47 SkyScan query 14:46:47 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.89<-21526 Statuses=0009 0009 14:46:47 Msec=0 True Az=136.38 Ze=-142.89 Az status=0009 Ze status=0009 14:46:47 Check angles 14:46:47 SkyScan query 14:46:48 SkyScan query done: ret=0 az=153.855<-10257 ze=-121.935<-20129 Statuses=0009 0009 14:46:48 Msec=750 True Az=153.855 Ze=-121.935 Az status=0009 Ze status=0009 14:46:48 Check angles 14:46:48 SkyScan query 14:46:49 SkyScan query done: ret=0 az=171.315<-11421 ze=-100.89<-18726 Statuses=0009 0009 14:46:49 Msec=1500 True Az=171.315 Ze=-100.89 Az status=0009 Ze status=0009 14:46:49 Check angles 14:46:49 SkyScan query 14:46:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.025<-17335 Statuses=0008 0009 14:46:50 Msec=2250 True Az=176.01 Ze=-80.025 Az status=0008 Ze status=0009 14:46:50 Check angles 14:46:50 SkyScan query 14:46:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.055<-15937 Statuses=0008 0009 14:46:50 Msec=3000 True Az=176.01 Ze=-59.055 Az status=0008 Ze status=0009 14:46:50 Check angles 14:46:50 SkyScan query 14:46:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:46:51 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:46:51 Message to Master queued w/err=0: serial=145910 error=0 14:46:56 Received message from Master: op=Filter serial=145911 14:46:56 Color wheel filter change from 0 to 0 14:46:56 FLIGetFilterPos err=0 currentPosition=0 14:46:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:56 Filter is already there-color wheel unchanged 14:46:56 Received message from Master: op=Shutter serial=145912 14:46:56 Shutter LASER close 14:46:56 Received message from Camera: op=State serial=145914 14:46:56 GetSingleValue result=40 Value=cccccccc 14:46:56 SkyScan query 14:46:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:46:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:57 Parameters OK 14:46:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:57 Set A/D data flow result=40 14:46:57 Set A/D channel type result=40 14:46:57 Set A/D encoding result=40 14:46:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:57 Set channel filter=0.000000e+000 result=40 14:46:57 Config A/D Result=40 14:46:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:57 Get A/D filter: -9.255963e+061 result=40 14:46:57 Get A/D value=-858993460 result=40 14:46:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:57 Parameters OK 14:46:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:57 Set A/D data flow result=40 14:46:57 Set A/D channel type result=40 14:46:57 Set A/D encoding result=40 14:46:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:57 Set channel filter=0.000000e+000 result=40 14:46:57 Config A/D Result=40 14:46:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:57 Get A/D filter: -9.255963e+061 result=40 14:46:57 Get A/D value=-858993460 result=40 14:46:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:57 Aux= 14:46:57 Message to Camera, serial 145914 queued 14:47:33 Received message from Master: op=PointingHead serial=145926 14:47:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:47:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:47:33 Point started: ret=0 14:47:33 point_skyscan result=0 14:47:34 Check angles 14:47:34 SkyScan query 14:47:35 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.065<-13471 Statuses=0009 0009 14:47:35 Msec=0 True Az=153.195 Ze=-22.065 Az status=0009 Ze status=0009 14:47:35 Check angles 14:47:35 SkyScan query 14:47:35 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.615<-12041 Statuses=0009 0009 14:47:35 Msec=750 True Az=135.36 Ze=-0.615 Az status=0009 Ze status=0009 14:47:35 Check angles 14:47:35 SkyScan query 14:47:36 SkyScan query done: ret=0 az=117.78<-7852 ze=20.355<-10643 Statuses=0009 0009 14:47:36 Msec=1500 True Az=117.78 Ze=20.355 Az status=0009 Ze status=0009 14:47:36 Check angles 14:47:36 SkyScan query 14:47:37 SkyScan query done: ret=0 az=100.41<-6694 ze=41.31<-9246 Statuses=0009 0009 14:47:37 Msec=2250 True Az=100.41 Ze=41.31 Az status=0009 Ze status=0009 14:47:37 Check angles 14:47:37 SkyScan query 14:47:38 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 14:47:38 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 14:47:38 Check angles 14:47:38 SkyScan query 14:47:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:47:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:47:38 Message to Master queued w/err=0: serial=145926 error=0 14:47:43 Received message from Master: op=Filter serial=145927 14:47:43 Color wheel filter change from 0 to 0 14:47:43 FLIGetFilterPos err=0 currentPosition=0 14:47:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:43 Filter is already there-color wheel unchanged 14:47:43 Received message from Master: op=Shutter serial=145928 14:47:43 Shutter LASER close 14:47:44 Received message from Camera: op=State serial=145930 14:47:44 GetSingleValue result=40 Value=cccccccc 14:47:44 SkyScan query 14:47:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:47:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:44 Parameters OK 14:47:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:44 Set A/D data flow result=40 14:47:44 Set A/D channel type result=40 14:47:44 Set A/D encoding result=40 14:47:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:44 Set channel filter=0.000000e+000 result=40 14:47:44 Config A/D Result=40 14:47:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:44 Get A/D filter: -9.255963e+061 result=40 14:47:44 Get A/D value=-858993460 result=40 14:47:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:44 Parameters OK 14:47:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:44 Set A/D data flow result=40 14:47:44 Set A/D channel type result=40 14:47:44 Set A/D encoding result=40 14:47:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:44 Set channel filter=0.000000e+000 result=40 14:47:44 Config A/D Result=40 14:47:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:44 Get A/D filter: -9.255963e+061 result=40 14:47:44 Get A/D value=-858993460 result=40 14:47:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:44 Aux= 14:47:44 Message to Camera, serial 145930 queued 14:48:21 Received message from Master: op=PointingHead serial=145943 14:48:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:48:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:48:21 Point started: ret=0 14:48:21 point_skyscan result=0 14:48:22 Check angles 14:48:22 SkyScan query 14:48:23 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 14:48:23 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 14:48:23 Check angles 14:48:23 SkyScan query 14:48:23 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 14:48:23 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 14:48:24 Check angles 14:48:24 SkyScan query 14:48:24 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 14:48:24 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 14:48:24 Check angles 14:48:24 SkyScan query 14:48:25 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 14:48:25 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 14:48:25 Check angles 14:48:25 SkyScan query 14:48:26 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:48:26 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:48:26 Check angles 14:48:26 SkyScan query 14:48:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:48:26 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:48:26 Message to Master queued w/err=0: serial=145943 error=0 14:48:31 Received message from Master: op=Filter serial=145944 14:48:31 Color wheel filter change from 0 to 0 14:48:31 FLIGetFilterPos err=0 currentPosition=0 14:48:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:31 Filter is already there-color wheel unchanged 14:48:32 Received message from Master: op=Shutter serial=145945 14:48:32 Shutter LASER close 14:48:32 Received message from Camera: op=State serial=145947 14:48:32 GetSingleValue result=40 Value=cccccccc 14:48:32 SkyScan query 14:48:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:48:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:32 Parameters OK 14:48:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:32 Set A/D data flow result=40 14:48:32 Set A/D channel type result=40 14:48:32 Set A/D encoding result=40 14:48:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:32 Set channel filter=0.000000e+000 result=40 14:48:32 Config A/D Result=40 14:48:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:32 Get A/D filter: -9.255963e+061 result=40 14:48:32 Get A/D value=-858993460 result=40 14:48:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:32 Parameters OK 14:48:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:32 Set A/D data flow result=40 14:48:32 Set A/D channel type result=40 14:48:32 Set A/D encoding result=40 14:48:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:32 Set channel filter=0.000000e+000 result=40 14:48:32 Config A/D Result=40 14:48:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:32 Get A/D filter: -9.255963e+061 result=40 14:48:32 Get A/D value=-858993460 result=40 14:48:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:32 Aux= 14:48:32 Message to Camera, serial 145947 queued 14:49:09 Received message from Master: op=PointingHead serial=145960 14:49:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:49:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:49:09 Point started: ret=0 14:49:09 point_skyscan result=0 14:49:10 Check angles 14:49:10 SkyScan query 14:49:11 SkyScan query done: ret=0 az=153.21<-10214 ze=8.955<-11403 Statuses=0009 0009 14:49:11 Msec=0 True Az=153.21 Ze=8.955 Az status=0009 Ze status=0009 14:49:11 Check angles 14:49:11 SkyScan query 14:49:11 SkyScan query done: ret=0 az=135.765<-9051 ze=-12.09<-12806 Statuses=0009 0009 14:49:11 Msec=750 True Az=135.765 Ze=-12.09 Az status=0009 Ze status=0009 14:49:12 Check angles 14:49:12 SkyScan query 14:49:12 SkyScan query done: ret=0 az=118.2<-7880 ze=-32.97<-14198 Statuses=0009 0009 14:49:12 Msec=1500 True Az=118.2 Ze=-32.97 Az status=0009 Ze status=0009 14:49:12 Check angles 14:49:12 SkyScan query 14:49:13 SkyScan query done: ret=0 az=100.845<-6723 ze=-51.525<-15435 Statuses=0009 0009 14:49:13 Msec=2250 True Az=100.845 Ze=-51.525 Az status=0009 Ze status=0009 14:49:13 Check angles 14:49:13 SkyScan query 14:49:14 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:49:14 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:49:14 Check angles 14:49:14 SkyScan query 14:49:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:49:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:49:14 Message to Master queued w/err=0: serial=145960 error=0 14:49:19 Received message from Master: op=Filter serial=145961 14:49:19 Color wheel filter change from 0 to 0 14:49:19 FLIGetFilterPos err=0 currentPosition=0 14:49:19 FLIGetStepsRemaining err=0 RemainingSteps=0 14:49:19 Filter is already there-color wheel unchanged 14:49:20 Received message from Master: op=Shutter serial=145962 14:49:20 Shutter LASER close 14:49:20 Received message from Camera: op=State serial=145964 14:49:20 GetSingleValue result=40 Value=cccccccc 14:49:20 SkyScan query 14:49:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:49:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:20 Parameters OK 14:49:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:20 Set A/D data flow result=40 14:49:20 Set A/D channel type result=40 14:49:20 Set A/D encoding result=40 14:49:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:20 Set channel filter=0.000000e+000 result=40 14:49:20 Config A/D Result=40 14:49:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:20 Get A/D filter: -9.255963e+061 result=40 14:49:20 Get A/D value=-858993460 result=40 14:49:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:20 Parameters OK 14:49:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:20 Set A/D data flow result=40 14:49:20 Set A/D channel type result=40 14:49:20 Set A/D encoding result=40 14:49:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:20 Set channel filter=0.000000e+000 result=40 14:49:20 Config A/D Result=40 14:49:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:20 Get A/D filter: -9.255963e+061 result=40 14:49:20 Get A/D value=-858993460 result=40 14:49:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:49:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:49:20 Aux= 14:49:20 Message to Camera, serial 145964 queued 14:49:57 Received message from Master: op=PointingHead serial=145977 14:49:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:49:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:49:57 Point started: ret=0 14:49:57 point_skyscan result=0 14:49:58 Check angles 14:49:58 SkyScan query 14:49:59 SkyScan query done: ret=0 az=108.78<-7252 ze=-81.15<-17410 Statuses=0009 0009 14:49:59 Msec=0 True Az=108.78 Ze=-81.15 Az status=0009 Ze status=0009 14:49:59 Check angles 14:49:59 SkyScan query 14:49:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 14:49:59 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 14:50:00 Check angles 14:50:00 SkyScan query 14:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.91<-20194 Statuses=0008 0009 14:50:00 Msec=1500 True Az=112.995 Ze=-122.91 Az status=0008 Ze status=0009 14:50:00 Check angles 14:50:00 SkyScan query 14:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.895<-21593 Statuses=0008 0009 14:50:01 Msec=2250 True Az=112.995 Ze=-143.895 Az status=0008 Ze status=0009 14:50:01 Check angles 14:50:01 SkyScan query 14:50:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.835<-22989 Statuses=0008 0009 14:50:02 Msec=3000 True Az=112.995 Ze=-164.835 Az status=0008 Ze status=0009 14:50:02 Check angles 14:50:02 SkyScan query 14:50:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:50:02 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:50:02 Message to Master queued w/err=0: serial=145977 error=0 14:50:07 Received message from Master: op=Filter serial=145978 14:50:07 Color wheel filter change from 0 to 0 14:50:07 FLIGetFilterPos err=0 currentPosition=0 14:50:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:07 Filter is already there-color wheel unchanged 14:50:08 Received message from Master: op=Shutter serial=145979 14:50:08 Shutter LASER open 14:50:08 Received message from Camera: op=State serial=145981 14:50:08 GetSingleValue result=40 Value=cccccccc 14:50:08 SkyScan query 14:50:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:50:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:08 Parameters OK 14:50:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:08 Set A/D data flow result=40 14:50:08 Set A/D channel type result=40 14:50:08 Set A/D encoding result=40 14:50:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:08 Set channel filter=0.000000e+000 result=40 14:50:08 Config A/D Result=40 14:50:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:08 Get A/D filter: -9.255963e+061 result=40 14:50:08 Get A/D value=-858993460 result=40 14:50:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:08 Parameters OK 14:50:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:08 Set A/D data flow result=40 14:50:08 Set A/D channel type result=40 14:50:08 Set A/D encoding result=40 14:50:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:08 Set channel filter=0.000000e+000 result=40 14:50:08 Config A/D Result=40 14:50:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:08 Get A/D filter: -9.255963e+061 result=40 14:50:08 Get A/D value=-858993460 result=40 14:50:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:08 Aux= 14:50:08 Message to Camera, serial 145981 queued 14:50:16 Received message from Master: op=Shutter serial=145990 14:50:16 Shutter LASER close 14:50:16 Received message from Master: op=PointingHead serial=145994 14:50:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:50:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:50:17 Point started: ret=0 14:50:17 point_skyscan result=0 14:50:17 Check angles 14:50:17 SkyScan query 14:50:18 SkyScan query done: ret=0 az=89.595<-5973 ze=156.9<-1540 Statuses=0009 0009 14:50:18 Msec=0 True Az=89.595 Ze=156.9 Az status=0009 Ze status=0009 14:50:18 Check angles 14:50:18 SkyScan query 14:50:19 SkyScan query done: ret=0 az=71.805<-4787 ze=135.525<-2965 Statuses=0009 0009 14:50:19 Msec=750 True Az=71.805 Ze=135.525 Az status=0009 Ze status=0009 14:50:19 Check angles 14:50:19 SkyScan query 14:50:19 SkyScan query done: ret=0 az=54.375<-3625 ze=114.495<-4367 Statuses=0009 0009 14:50:19 Msec=1500 True Az=54.375 Ze=114.495 Az status=0009 Ze status=0009 14:50:20 Check angles 14:50:20 SkyScan query 14:50:20 SkyScan query done: ret=0 az=40.965<-2731 ze=93.6<-5760 Statuses=0009 0009 14:50:20 Msec=2250 True Az=40.965 Ze=93.6 Az status=0009 Ze status=0009 14:50:20 Check angles 14:50:20 SkyScan query 14:50:21 SkyScan query done: ret=0 az=40.995<-2733 ze=72.63<-7158 Statuses=0008 0009 14:50:21 Msec=3000 True Az=40.995 Ze=72.63 Az status=0008 Ze status=0009 14:50:21 Check angles 14:50:21 SkyScan query 14:50:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 14:50:22 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 14:50:22 Check angles 14:50:22 SkyScan query 14:50:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:50:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:50:22 Message to Master queued w/err=0: serial=145994 error=0 14:50:27 Received message from Master: op=Filter serial=145995 14:50:27 Color wheel filter change from 0 to 0 14:50:27 FLIGetFilterPos err=0 currentPosition=0 14:50:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:27 Filter is already there-color wheel unchanged 14:50:28 Received message from Master: op=Shutter serial=145996 14:50:28 Shutter LASER close 14:50:28 Received message from Camera: op=State serial=145998 14:50:28 GetSingleValue result=40 Value=cccccccc 14:50:28 SkyScan query 14:50:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:50:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:28 Parameters OK 14:50:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:28 Set A/D data flow result=40 14:50:28 Set A/D channel type result=40 14:50:28 Set A/D encoding result=40 14:50:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:28 Set channel filter=0.000000e+000 result=40 14:50:28 Config A/D Result=40 14:50:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:28 Get A/D filter: -9.255963e+061 result=40 14:50:28 Get A/D value=-858993460 result=40 14:50:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:28 Parameters OK 14:50:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:28 Set A/D data flow result=40 14:50:28 Set A/D channel type result=40 14:50:28 Set A/D encoding result=40 14:50:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:28 Set channel filter=0.000000e+000 result=40 14:50:28 Config A/D Result=40 14:50:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:28 Get A/D filter: -9.255963e+061 result=40 14:50:28 Get A/D value=-858993460 result=40 14:50:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:28 Aux= 14:50:28 Message to Camera, serial 145998 queued 14:51:05 Received message from Master: op=PointingHead serial=146011 14:51:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:51:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:51:06 Point started: ret=0 14:51:06 point_skyscan result=0 14:51:06 Check angles 14:51:06 SkyScan query 14:51:07 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 14:51:07 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 14:51:07 Check angles 14:51:07 SkyScan query 14:51:08 SkyScan query done: ret=0 az=81.69<-5446 ze=66.495<-7567 Statuses=0009 0008 14:51:08 Msec=750 True Az=81.69 Ze=66.495 Az status=0009 Ze status=0008 14:51:08 Check angles 14:51:08 SkyScan query 14:51:08 SkyScan query done: ret=0 az=99.51<-6634 ze=66.495<-7567 Statuses=0009 0008 14:51:08 Msec=1500 True Az=99.51 Ze=66.495 Az status=0009 Ze status=0008 14:51:09 Check angles 14:51:09 SkyScan query 14:51:09 SkyScan query done: ret=0 az=117.045<-7803 ze=66.495<-7567 Statuses=0009 0008 14:51:09 Msec=2250 True Az=117.045 Ze=66.495 Az status=0009 Ze status=0008 14:51:09 Check angles 14:51:09 SkyScan query 14:51:10 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 14:51:10 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 14:51:10 Check angles 14:51:10 SkyScan query 14:51:11 SkyScan query done: ret=0 az=152.31<-10154 ze=66.495<-7567 Statuses=0009 0008 14:51:11 Msec=3750 True Az=152.31 Ze=66.495 Az status=0009 Ze status=0008 14:51:11 Check angles 14:51:11 SkyScan query 14:51:11 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 14:51:11 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 14:51:11 Message to Master queued w/err=0: serial=146011 error=0 14:51:16 Received message from Master: op=Filter serial=146012 14:51:16 Color wheel filter change from 0 to 0 14:51:16 FLIGetFilterPos err=0 currentPosition=0 14:51:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:16 Filter is already there-color wheel unchanged 14:51:17 Received message from Master: op=Shutter serial=146013 14:51:17 Shutter LASER close 14:51:17 Received message from Camera: op=State serial=146015 14:51:17 GetSingleValue result=40 Value=cccccccc 14:51:17 SkyScan query 14:51:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:51:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:17 Parameters OK 14:51:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:17 Set A/D data flow result=40 14:51:17 Set A/D channel type result=40 14:51:17 Set A/D encoding result=40 14:51:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:17 Set channel filter=0.000000e+000 result=40 14:51:17 Config A/D Result=40 14:51:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:17 Get A/D filter: -9.255963e+061 result=40 14:51:17 Get A/D value=-858993460 result=40 14:51:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:17 Parameters OK 14:51:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:17 Set A/D data flow result=40 14:51:17 Set A/D channel type result=40 14:51:17 Set A/D encoding result=40 14:51:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:17 Set channel filter=0.000000e+000 result=40 14:51:17 Config A/D Result=40 14:51:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:17 Get A/D filter: -9.255963e+061 result=40 14:51:17 Get A/D value=-858993460 result=40 14:51:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:51:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:51:17 Aux= 14:51:17 Message to Camera, serial 146015 queued 14:51:54 Received message from Master: op=PointingHead serial=146028 14:51:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:51:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:51:54 Point started: ret=0 14:51:54 point_skyscan result=0 14:51:55 Check angles 14:51:55 SkyScan query 14:51:56 SkyScan query done: ret=0 az=135.105<-9007 ze=36.855<-9543 Statuses=0009 0009 14:51:56 Msec=0 True Az=135.105 Ze=36.855 Az status=0009 Ze status=0009 14:51:56 Check angles 14:51:56 SkyScan query 14:51:56 SkyScan query done: ret=0 az=117.66<-7844 ze=15.915<-10939 Statuses=0009 0009 14:51:56 Msec=750 True Az=117.66 Ze=15.915 Az status=0009 Ze status=0009 14:51:57 Check angles 14:51:57 SkyScan query 14:51:57 SkyScan query done: ret=0 az=100.275<-6685 ze=-5.055<-12337 Statuses=0009 0009 14:51:57 Msec=1500 True Az=100.275 Ze=-5.055 Az status=0009 Ze status=0009 14:51:57 Check angles 14:51:57 SkyScan query 14:51:58 SkyScan query done: ret=0 az=82.38<-5492 ze=-26.475<-13765 Statuses=0009 0009 14:51:58 Msec=2250 True Az=82.38 Ze=-26.475 Az status=0009 Ze status=0009 14:51:58 Check angles 14:51:58 SkyScan query 14:51:59 SkyScan query done: ret=0 az=64.8<-4320 ze=-38.595<-14573 Statuses=0009 0008 14:51:59 Msec=3000 True Az=64.8 Ze=-38.595 Az status=0009 Ze status=0008 14:51:59 Check angles 14:51:59 SkyScan query 14:52:00 SkyScan query done: ret=0 az=47.43<-3162 ze=-38.52<-14568 Statuses=0009 0008 14:52:00 Msec=3750 True Az=47.43 Ze=-38.52 Az status=0009 Ze status=0008 14:52:00 Check angles 14:52:00 SkyScan query 14:52:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:52:00 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:52:00 Message to Master queued w/err=0: serial=146028 error=0 14:52:05 Received message from Master: op=Filter serial=146029 14:52:05 Color wheel filter change from 0 to 0 14:52:05 FLIGetFilterPos err=0 currentPosition=0 14:52:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:05 Filter is already there-color wheel unchanged 14:52:05 Received message from Master: op=Shutter serial=146030 14:52:05 Shutter LASER close 14:52:05 Received message from Camera: op=State serial=146032 14:52:05 GetSingleValue result=40 Value=cccccccc 14:52:05 SkyScan query 14:52:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:52:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:06 Parameters OK 14:52:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:06 Set A/D data flow result=40 14:52:06 Set A/D channel type result=40 14:52:06 Set A/D encoding result=40 14:52:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:06 Set channel filter=0.000000e+000 result=40 14:52:06 Config A/D Result=40 14:52:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:06 Get A/D filter: -9.255963e+061 result=40 14:52:06 Get A/D value=-858993460 result=40 14:52:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:06 Parameters OK 14:52:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:06 Set A/D data flow result=40 14:52:06 Set A/D channel type result=40 14:52:06 Set A/D encoding result=40 14:52:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:06 Set channel filter=0.000000e+000 result=40 14:52:06 Config A/D Result=40 14:52:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:06 Get A/D filter: -9.255963e+061 result=40 14:52:06 Get A/D value=-858993460 result=40 14:52:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:06 Aux= 14:52:06 Message to Camera, serial 146032 queued 14:52:42 Received message from Master: op=PointingHead serial=146044 14:52:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:52:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:52:42 Point started: ret=0 14:52:42 point_skyscan result=0 14:52:43 Check angles 14:52:43 SkyScan query 14:52:44 SkyScan query done: ret=0 az=64.335<-4289 ze=-68.94<-16596 Statuses=0009 0009 14:52:44 Msec=0 True Az=64.335 Ze=-68.94 Az status=0009 Ze status=0009 14:52:44 Check angles 14:52:44 SkyScan query 14:52:44 SkyScan query done: ret=0 az=82.26<-5484 ze=-90.18<-18012 Statuses=0009 0009 14:52:44 Msec=750 True Az=82.26 Ze=-90.18 Az status=0009 Ze status=0009 14:52:45 Check angles 14:52:45 SkyScan query 14:52:45 SkyScan query done: ret=0 az=99.66<-6644 ze=-111.135<-19409 Statuses=0009 0009 14:52:45 Msec=1500 True Az=99.66 Ze=-111.135 Az status=0009 Ze status=0009 14:52:45 Check angles 14:52:45 SkyScan query 14:52:46 SkyScan query done: ret=0 az=117.525<-7835 ze=-132.555<-20837 Statuses=0009 0009 14:52:46 Msec=2250 True Az=117.525 Ze=-132.555 Az status=0009 Ze status=0009 14:52:46 Check angles 14:52:46 SkyScan query 14:52:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 14:52:47 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 14:52:47 Check angles 14:52:47 SkyScan query 14:52:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 14:52:47 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 14:52:47 Message to Master queued w/err=0: serial=146044 error=0 14:52:52 Received message from Master: op=Filter serial=146045 14:52:52 Color wheel filter change from 0 to 0 14:52:52 FLIGetFilterPos err=0 currentPosition=0 14:52:52 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:52 Filter is already there-color wheel unchanged 14:52:53 Received message from Master: op=Shutter serial=146046 14:52:53 Shutter LASER close 14:52:53 Received message from Camera: op=State serial=146048 14:52:53 GetSingleValue result=40 Value=cccccccc 14:52:53 SkyScan query 14:52:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:52:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:53 Parameters OK 14:52:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:53 Set A/D data flow result=40 14:52:53 Set A/D channel type result=40 14:52:53 Set A/D encoding result=40 14:52:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:53 Set channel filter=0.000000e+000 result=40 14:52:53 Config A/D Result=40 14:52:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:53 Get A/D filter: -9.255963e+061 result=40 14:52:53 Get A/D value=-858993460 result=40 14:52:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:53 Parameters OK 14:52:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:53 Set A/D data flow result=40 14:52:53 Set A/D channel type result=40 14:52:53 Set A/D encoding result=40 14:52:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:53 Set channel filter=0.000000e+000 result=40 14:52:53 Config A/D Result=40 14:52:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:53 Get A/D filter: -9.255963e+061 result=40 14:52:53 Get A/D value=-858993460 result=40 14:52:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:53 Aux= 14:52:53 Message to Camera, serial 146048 queued 14:53:30 Received message from Master: op=PointingHead serial=146061 14:53:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:53:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:53:30 Point started: ret=0 14:53:30 point_skyscan result=0 14:53:31 Check angles 14:53:31 SkyScan query 14:53:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 14:53:32 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 14:53:32 Check angles 14:53:32 SkyScan query 14:53:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:53:33 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:53:33 Message to Master queued w/err=0: serial=146061 error=0 14:53:38 Received message from Master: op=Filter serial=146062 14:53:38 Color wheel filter change from 0 to 0 14:53:38 FLIGetFilterPos err=0 currentPosition=0 14:53:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:38 Filter is already there-color wheel unchanged 14:53:38 Received message from Master: op=Shutter serial=146063 14:53:38 Shutter LASER open 14:53:38 Received message from Camera: op=State serial=146065 14:53:38 GetSingleValue result=40 Value=cccccccc 14:53:38 SkyScan query 14:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:53:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:38 Parameters OK 14:53:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:38 Set A/D data flow result=40 14:53:38 Set A/D channel type result=40 14:53:38 Set A/D encoding result=40 14:53:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:38 Set channel filter=0.000000e+000 result=40 14:53:38 Config A/D Result=40 14:53:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:38 Get A/D filter: -9.255963e+061 result=40 14:53:38 Get A/D value=-858993460 result=40 14:53:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:38 Parameters OK 14:53:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:38 Set A/D data flow result=40 14:53:38 Set A/D channel type result=40 14:53:38 Set A/D encoding result=40 14:53:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:38 Set channel filter=0.000000e+000 result=40 14:53:38 Config A/D Result=40 14:53:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:38 Get A/D filter: -9.255963e+061 result=40 14:53:38 Get A/D value=-858993460 result=40 14:53:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:38 Aux= 14:53:38 Message to Camera, serial 146065 queued 14:53:47 Received message from Master: op=Shutter serial=146075 14:53:47 Shutter LASER close 14:53:47 Received message from Master: op=PointingHead serial=146079 14:53:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:53:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:53:48 Point started: ret=0 14:53:48 point_skyscan result=0 14:53:49 Check angles 14:53:49 SkyScan query 14:53:49 SkyScan query done: ret=0 az=136.41<-9094 ze=-142.74<-21516 Statuses=0009 0009 14:53:49 Msec=0 True Az=136.41 Ze=-142.74 Az status=0009 Ze status=0009 14:53:49 Check angles 14:53:49 SkyScan query 14:53:50 SkyScan query done: ret=0 az=153.99<-10266 ze=-121.77<-20118 Statuses=0009 0009 14:53:50 Msec=750 True Az=153.99 Ze=-121.77 Az status=0009 Ze status=0009 14:53:50 Check angles 14:53:50 SkyScan query 14:53:51 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.725<-18715 Statuses=0009 0009 14:53:51 Msec=1500 True Az=171.42 Ze=-100.725 Az status=0009 Ze status=0009 14:53:51 Check angles 14:53:51 SkyScan query 14:53:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.83<-17322 Statuses=0008 0009 14:53:51 Msec=2250 True Az=176.01 Ze=-79.83 Az status=0008 Ze status=0009 14:53:52 Check angles 14:53:52 SkyScan query 14:53:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.86<-15924 Statuses=0008 0009 14:53:52 Msec=3000 True Az=175.995 Ze=-58.86 Az status=0008 Ze status=0009 14:53:52 Check angles 14:53:52 SkyScan query 14:53:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:53:53 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:53:53 Message to Master queued w/err=0: serial=146079 error=0 14:53:58 Received message from Master: op=Filter serial=146080 14:53:58 Color wheel filter change from 0 to 0 14:53:58 FLIGetFilterPos err=0 currentPosition=0 14:53:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:58 Filter is already there-color wheel unchanged 14:53:58 Received message from Master: op=Shutter serial=146081 14:53:58 Shutter LASER close 14:53:58 Received message from Camera: op=State serial=146083 14:53:58 GetSingleValue result=40 Value=cccccccc 14:53:58 SkyScan query 14:53:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:53:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:59 Parameters OK 14:53:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:59 Set A/D data flow result=40 14:53:59 Set A/D channel type result=40 14:53:59 Set A/D encoding result=40 14:53:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:59 Set channel filter=0.000000e+000 result=40 14:53:59 Config A/D Result=40 14:53:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:59 Get A/D filter: -9.255963e+061 result=40 14:53:59 Get A/D value=-858993460 result=40 14:53:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:59 Parameters OK 14:53:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:59 Set A/D data flow result=40 14:53:59 Set A/D channel type result=40 14:53:59 Set A/D encoding result=40 14:53:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:59 Set channel filter=0.000000e+000 result=40 14:53:59 Config A/D Result=40 14:53:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:59 Get A/D filter: -9.255963e+061 result=40 14:53:59 Get A/D value=-858993460 result=40 14:53:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:59 Aux= 14:53:59 Message to Camera, serial 146083 queued 14:54:36 Received message from Master: op=PointingHead serial=146096 14:54:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:54:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:54:36 Point started: ret=0 14:54:36 point_skyscan result=0 14:54:37 Check angles 14:54:37 SkyScan query 14:54:37 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.9<-13460 Statuses=0009 0009 14:54:37 Msec=0 True Az=152.955 Ze=-21.9 Az status=0009 Ze status=0009 14:54:37 Check angles 14:54:37 SkyScan query 14:54:38 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.9<-12060 Statuses=0009 0009 14:54:38 Msec=750 True Az=135.66 Ze=-0.9 Az status=0009 Ze status=0009 14:54:38 Check angles 14:54:38 SkyScan query 14:54:39 SkyScan query done: ret=0 az=117.615<-7841 ze=20.52<-10632 Statuses=0009 0009 14:54:39 Msec=1500 True Az=117.615 Ze=20.52 Az status=0009 Ze status=0009 14:54:39 Check angles 14:54:39 SkyScan query 14:54:40 SkyScan query done: ret=0 az=100.35<-6690 ze=41.475<-9235 Statuses=0009 0009 14:54:40 Msec=2250 True Az=100.35 Ze=41.475 Az status=0009 Ze status=0009 14:54:40 Check angles 14:54:40 SkyScan query 14:54:40 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 14:54:40 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 14:54:41 Check angles 14:54:41 SkyScan query 14:54:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:54:41 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:54:41 Message to Master queued w/err=0: serial=146096 error=0 14:54:46 Received message from Master: op=Filter serial=146097 14:54:46 Color wheel filter change from 0 to 0 14:54:46 FLIGetFilterPos err=0 currentPosition=0 14:54:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:54:46 Filter is already there-color wheel unchanged 14:54:46 Received message from Master: op=Shutter serial=146098 14:54:46 Shutter LASER close 14:54:46 Received message from Camera: op=State serial=146100 14:54:46 GetSingleValue result=40 Value=cccccccc 14:54:46 SkyScan query 14:54:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:54:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:47 Parameters OK 14:54:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:47 Set A/D data flow result=40 14:54:47 Set A/D channel type result=40 14:54:47 Set A/D encoding result=40 14:54:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:47 Set channel filter=0.000000e+000 result=40 14:54:47 Config A/D Result=40 14:54:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:47 Get A/D filter: -9.255963e+061 result=40 14:54:47 Get A/D value=-858993460 result=40 14:54:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:47 Parameters OK 14:54:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:47 Set A/D data flow result=40 14:54:47 Set A/D channel type result=40 14:54:47 Set A/D encoding result=40 14:54:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:47 Set channel filter=0.000000e+000 result=40 14:54:47 Config A/D Result=40 14:54:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:47 Get A/D filter: -9.255963e+061 result=40 14:54:47 Get A/D value=-858993460 result=40 14:54:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:47 Aux= 14:54:47 Message to Camera, serial 146100 queued 14:55:24 Received message from Master: op=PointingHead serial=146113 14:55:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:55:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:55:24 Point started: ret=0 14:55:24 point_skyscan result=0 14:55:25 Check angles 14:55:25 SkyScan query 14:55:25 SkyScan query done: ret=0 az=108.72<-7248 ze=38.49<-9434 Statuses=0009 0008 14:55:25 Msec=0 True Az=108.72 Ze=38.49 Az status=0009 Ze status=0008 14:55:26 Check angles 14:55:26 SkyScan query 14:55:26 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 14:55:26 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 14:55:26 Check angles 14:55:26 SkyScan query 14:55:27 SkyScan query done: ret=0 az=143.79<-9586 ze=38.505<-9433 Statuses=0009 0008 14:55:27 Msec=1500 True Az=143.79 Ze=38.505 Az status=0009 Ze status=0008 14:55:27 Check angles 14:55:27 SkyScan query 14:55:28 SkyScan query done: ret=0 az=161.1<-10740 ze=38.505<-9433 Statuses=0009 0008 14:55:28 Msec=2250 True Az=161.1 Ze=38.505 Az status=0009 Ze status=0008 14:55:28 Check angles 14:55:28 SkyScan query 14:55:28 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:55:28 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:55:29 Check angles [UTC 2018-12-14 14:55:29] 14:55:29 SkyScan query 14:55:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:55:29 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:55:29 Message to Master queued w/err=0: serial=146113 error=0 14:55:34 Received message from Master: op=Filter serial=146114 14:55:34 Color wheel filter change from 0 to 0 14:55:34 FLIGetFilterPos err=0 currentPosition=0 14:55:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:34 Filter is already there-color wheel unchanged 14:55:34 Received message from Master: op=Shutter serial=146115 14:55:34 Shutter LASER close 14:55:34 Received message from Camera: op=State serial=146117 14:55:34 GetSingleValue result=40 Value=cccccccc 14:55:34 SkyScan query 14:55:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:55:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:35 Parameters OK 14:55:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:35 Set A/D data flow result=40 14:55:35 Set A/D channel type result=40 14:55:35 Set A/D encoding result=40 14:55:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:35 Set channel filter=0.000000e+000 result=40 14:55:35 Config A/D Result=40 14:55:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:35 Get A/D filter: -9.255963e+061 result=40 14:55:35 Get A/D value=-858993460 result=40 14:55:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:35 Parameters OK 14:55:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:35 Set A/D data flow result=40 14:55:35 Set A/D channel type result=40 14:55:35 Set A/D encoding result=40 14:55:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:35 Set channel filter=0.000000e+000 result=40 14:55:35 Config A/D Result=40 14:55:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:35 Get A/D filter: -9.255963e+061 result=40 14:55:35 Get A/D value=-858993460 result=40 14:55:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:35 Aux= 14:55:35 Message to Camera, serial 146117 queued [UTC 2018-12-14 14:55:52] 14:56:12 Received message from Master: op=PointingHead serial=146130 14:56:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:56:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:56:12 Point started: ret=0 14:56:12 point_skyscan result=0 14:56:13 Check angles 14:56:13 SkyScan query 14:56:14 SkyScan query done: ret=0 az=152.895<-10193 ze=8.475<-11435 Statuses=0009 0009 14:56:14 Msec=0 True Az=152.895 Ze=8.475 Az status=0009 Ze status=0009 14:56:14 Check angles 14:56:14 SkyScan query 14:56:14 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.45<-12830 Statuses=0009 0009 14:56:14 Msec=750 True Az=135.36 Ze=-12.45 Az status=0009 Ze status=0009 14:56:14 Check angles 14:56:14 SkyScan query 14:56:15 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.42<-14228 Statuses=0009 0009 14:56:15 Msec=1500 True Az=117.78 Ze=-33.42 Az status=0009 Ze status=0009 14:56:15 Check angles 14:56:15 SkyScan query 14:56:16 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.555<-15437 Statuses=0009 0009 14:56:16 Msec=2250 True Az=100.44 Ze=-51.555 Az status=0009 Ze status=0009 14:56:16 Check angles 14:56:16 SkyScan query 14:56:17 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 14:56:17 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 14:56:17 Check angles 14:56:17 SkyScan query 14:56:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:56:17 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:56:17 Message to Master queued w/err=0: serial=146130 error=0 14:56:22 Received message from Master: op=Filter serial=146131 14:56:22 Color wheel filter change from 0 to 0 14:56:22 FLIGetFilterPos err=0 currentPosition=0 14:56:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:22 Filter is already there-color wheel unchanged 14:56:22 Received message from Master: op=Shutter serial=146132 14:56:22 Shutter LASER close 14:56:22 Received message from Camera: op=State serial=146134 14:56:22 GetSingleValue result=40 Value=cccccccc 14:56:22 SkyScan query 14:56:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:56:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:23 Parameters OK 14:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:23 Set A/D data flow result=40 14:56:23 Set A/D channel type result=40 14:56:23 Set A/D encoding result=40 14:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:23 Set channel filter=0.000000e+000 result=40 14:56:23 Config A/D Result=40 14:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:23 Get A/D filter: -9.255963e+061 result=40 14:56:23 Get A/D value=-858993460 result=40 14:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:23 Parameters OK 14:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:23 Set A/D data flow result=40 14:56:23 Set A/D channel type result=40 14:56:23 Set A/D encoding result=40 14:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:23 Set channel filter=0.000000e+000 result=40 14:56:23 Config A/D Result=40 14:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:23 Get A/D filter: -9.255963e+061 result=40 14:56:23 Get A/D value=-858993460 result=40 14:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:23 Aux= 14:56:23 Message to Camera, serial 146134 queued 14:57:00 Received message from Master: op=PointingHead serial=146147 14:57:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:57:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:57:00 Point started: ret=0 14:57:00 point_skyscan result=0 14:57:01 Check angles 14:57:01 SkyScan query 14:57:02 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.27<-17418 Statuses=0009 0009 14:57:02 Msec=0 True Az=108.915 Ze=-81.27 Az status=0009 Ze status=0009 14:57:02 Check angles 14:57:02 SkyScan query 14:57:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.24<-18816 Statuses=0008 0009 14:57:02 Msec=750 True Az=112.995 Ze=-102.24 Az status=0008 Ze status=0009 14:57:02 Check angles 14:57:02 SkyScan query 14:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.195<-20213 Statuses=0008 0009 14:57:03 Msec=1500 True Az=112.995 Ze=-123.195 Az status=0008 Ze status=0009 14:57:03 Check angles 14:57:03 SkyScan query 14:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.135<-21609 Statuses=0008 0009 14:57:04 Msec=2250 True Az=112.995 Ze=-144.135 Az status=0008 Ze status=0009 14:57:04 Check angles 14:57:04 SkyScan query 14:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.09<-23006 Statuses=0008 0009 14:57:05 Msec=3000 True Az=112.995 Ze=-165.09 Az status=0008 Ze status=0009 14:57:05 Check angles 14:57:05 SkyScan query 14:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:57:05 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:57:05 Message to Master queued w/err=0: serial=146147 error=0 14:57:10 Received message from Master: op=Filter serial=146148 14:57:10 Color wheel filter change from 0 to 0 14:57:10 FLIGetFilterPos err=0 currentPosition=0 14:57:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:10 Filter is already there-color wheel unchanged 14:57:11 Received message from Master: op=Shutter serial=146149 14:57:11 Shutter LASER open 14:57:11 Received message from Camera: op=State serial=146151 14:57:11 GetSingleValue result=40 Value=cccccccc 14:57:11 SkyScan query 14:57:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:57:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:11 Parameters OK 14:57:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:11 Set A/D data flow result=40 14:57:11 Set A/D channel type result=40 14:57:11 Set A/D encoding result=40 14:57:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:11 Set channel filter=0.000000e+000 result=40 14:57:11 Config A/D Result=40 14:57:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:11 Get A/D filter: -9.255963e+061 result=40 14:57:11 Get A/D value=-858993460 result=40 14:57:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:11 Parameters OK 14:57:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:11 Set A/D data flow result=40 14:57:11 Set A/D channel type result=40 14:57:11 Set A/D encoding result=40 14:57:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:11 Set channel filter=0.000000e+000 result=40 14:57:11 Config A/D Result=40 14:57:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:11 Get A/D filter: -9.255963e+061 result=40 14:57:11 Get A/D value=-858993460 result=40 14:57:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:11 Aux= 14:57:11 Message to Camera, serial 146151 queued 14:57:20 Received message from Master: op=Shutter serial=146161 14:57:20 Shutter LASER close 14:57:20 Received message from Master: op=PointingHead serial=146165 14:57:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:57:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:57:21 Point started: ret=0 14:57:21 point_skyscan result=0 14:57:21 Check angles 14:57:21 SkyScan query 14:57:22 SkyScan query done: ret=0 az=89.835<-5989 ze=157.26<-1516 Statuses=0009 0009 14:57:22 Msec=0 True Az=89.835 Ze=157.26 Az status=0009 Ze status=0009 14:57:22 Check angles 14:57:22 SkyScan query 14:57:23 SkyScan query done: ret=0 az=72.03<-4802 ze=135.87<-2942 Statuses=0009 0009 14:57:23 Msec=750 True Az=72.03 Ze=135.87 Az status=0009 Ze status=0009 14:57:23 Check angles 14:57:23 SkyScan query 14:57:23 SkyScan query done: ret=0 az=54.63<-3642 ze=114.87<-4342 Statuses=0009 0009 14:57:23 Msec=1500 True Az=54.63 Ze=114.87 Az status=0009 Ze status=0009 14:57:24 Check angles 14:57:24 SkyScan query 14:57:24 SkyScan query done: ret=0 az=40.995<-2733 ze=93.945<-5737 Statuses=0009 0009 14:57:24 Msec=2250 True Az=40.995 Ze=93.945 Az status=0009 Ze status=0009 14:57:24 Check angles 14:57:24 SkyScan query 14:57:25 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 14:57:25 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 14:57:25 Check angles 14:57:25 SkyScan query 14:57:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 14:57:26 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 14:57:26 Check angles 14:57:26 SkyScan query 14:57:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:57:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:57:26 Message to Master queued w/err=0: serial=146165 error=0 14:57:31 Received message from Master: op=Filter serial=146166 14:57:31 Color wheel filter change from 0 to 0 14:57:31 FLIGetFilterPos err=0 currentPosition=0 14:57:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:31 Filter is already there-color wheel unchanged 14:57:32 Received message from Master: op=Shutter serial=146167 14:57:32 Shutter LASER close 14:57:32 Received message from Camera: op=State serial=146169 14:57:32 GetSingleValue result=40 Value=cccccccc 14:57:32 SkyScan query 14:57:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:57:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:32 Parameters OK 14:57:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:32 Set A/D data flow result=40 14:57:32 Set A/D channel type result=40 14:57:32 Set A/D encoding result=40 14:57:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:32 Set channel filter=0.000000e+000 result=40 14:57:32 Config A/D Result=40 14:57:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:32 Get A/D filter: -9.255963e+061 result=40 14:57:32 Get A/D value=-858993460 result=40 14:57:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:32 Parameters OK 14:57:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:32 Set A/D data flow result=40 14:57:32 Set A/D channel type result=40 14:57:32 Set A/D encoding result=40 14:57:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:32 Set channel filter=0.000000e+000 result=40 14:57:32 Config A/D Result=40 14:57:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:32 Get A/D filter: -9.255963e+061 result=40 14:57:32 Get A/D value=-858993460 result=40 14:57:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:32 Aux= 14:57:32 Message to Camera, serial 146169 queued 14:58:09 Received message from Master: op=PointingHead serial=146182 14:58:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:58:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:58:09 Point started: ret=0 14:58:09 point_skyscan result=0 14:58:10 Check angles 14:58:10 SkyScan query 14:58:11 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 14:58:11 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 14:58:11 Check angles 14:58:11 SkyScan query 14:58:12 SkyScan query done: ret=0 az=81.405<-5427 ze=66.495<-7567 Statuses=0009 0008 14:58:12 Msec=750 True Az=81.405 Ze=66.495 Az status=0009 Ze status=0008 14:58:12 Check angles 14:58:12 SkyScan query 14:58:12 SkyScan query done: ret=0 az=99.18<-6612 ze=66.495<-7567 Statuses=0009 0008 14:58:12 Msec=1500 True Az=99.18 Ze=66.495 Az status=0009 Ze status=0008 14:58:13 Check angles 14:58:13 SkyScan query 14:58:13 SkyScan query done: ret=0 az=117.06<-7804 ze=66.495<-7567 Statuses=0009 0008 14:58:13 Msec=2250 True Az=117.06 Ze=66.495 Az status=0009 Ze status=0008 14:58:13 Check angles 14:58:13 SkyScan query 14:58:14 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 14:58:14 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 14:58:14 Check angles 14:58:14 SkyScan query 14:58:15 SkyScan query done: ret=0 az=152.34<-10156 ze=66.495<-7567 Statuses=0009 0008 14:58:15 Msec=3750 True Az=152.34 Ze=66.495 Az status=0009 Ze status=0008 14:58:15 Check angles 14:58:15 SkyScan query 14:58:15 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 14:58:15 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 14:58:15 Message to Master queued w/err=0: serial=146182 error=0 14:58:20 Received message from Master: op=Filter serial=146183 14:58:20 Color wheel filter change from 0 to 0 14:58:20 FLIGetFilterPos err=0 currentPosition=0 14:58:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:20 Filter is already there-color wheel unchanged 14:58:21 Received message from Master: op=Shutter serial=146184 14:58:21 Shutter LASER close 14:58:21 Received message from Camera: op=State serial=146186 14:58:21 GetSingleValue result=40 Value=cccccccc 14:58:21 SkyScan query 14:58:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:58:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:21 Parameters OK 14:58:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:21 Set A/D data flow result=40 14:58:21 Set A/D channel type result=40 14:58:21 Set A/D encoding result=40 14:58:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:21 Set channel filter=0.000000e+000 result=40 14:58:21 Config A/D Result=40 14:58:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:21 Get A/D filter: -9.255963e+061 result=40 14:58:21 Get A/D value=-858993460 result=40 14:58:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:21 Parameters OK 14:58:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:21 Set A/D data flow result=40 14:58:21 Set A/D channel type result=40 14:58:21 Set A/D encoding result=40 14:58:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:21 Set channel filter=0.000000e+000 result=40 14:58:21 Config A/D Result=40 14:58:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:21 Get A/D filter: -9.255963e+061 result=40 14:58:21 Get A/D value=-858993460 result=40 14:58:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:21 Aux= 14:58:21 Message to Camera, serial 146186 queued 14:58:58 Received message from Master: op=PointingHead serial=146199 14:58:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:58:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:58:58 Point started: ret=0 14:58:58 point_skyscan result=0 14:58:59 Check angles 14:58:59 SkyScan query 14:59:00 SkyScan query done: ret=0 az=134.805<-8987 ze=36.51<-9566 Statuses=0009 0009 14:59:00 Msec=0 True Az=134.805 Ze=36.51 Az status=0009 Ze status=0009 14:59:00 Check angles 14:59:00 SkyScan query 14:59:00 SkyScan query done: ret=0 az=116.97<-7798 ze=15.105<-10993 Statuses=0009 0009 14:59:00 Msec=750 True Az=116.97 Ze=15.105 Az status=0009 Ze status=0009 14:59:01 Check angles 14:59:01 SkyScan query 14:59:01 SkyScan query done: ret=0 az=99.09<-6606 ze=-6.36<-12424 Statuses=0009 0009 14:59:01 Msec=1500 True Az=99.09 Ze=-6.36 Az status=0009 Ze status=0009 14:59:01 Check angles 14:59:01 SkyScan query 14:59:02 SkyScan query done: ret=0 az=81.645<-5443 ze=-27.315<-13821 Statuses=0009 0009 14:59:02 Msec=2250 True Az=81.645 Ze=-27.315 Az status=0009 Ze status=0009 14:59:02 Check angles 14:59:02 SkyScan query 14:59:03 SkyScan query done: ret=0 az=63.87<-4258 ze=-38.595<-14573 Statuses=0009 0008 14:59:03 Msec=3000 True Az=63.87 Ze=-38.595 Az status=0009 Ze status=0008 14:59:03 Check angles 14:59:03 SkyScan query 14:59:04 SkyScan query done: ret=0 az=46.08<-3072 ze=-38.52<-14568 Statuses=0009 0008 14:59:04 Msec=3750 True Az=46.08 Ze=-38.52 Az status=0009 Ze status=0008 14:59:04 Check angles 14:59:04 SkyScan query 14:59:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:59:04 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:59:04 Message to Master queued w/err=0: serial=146199 error=0 14:59:09 Received message from Master: op=Filter serial=146200 14:59:09 Color wheel filter change from 0 to 0 14:59:09 FLIGetFilterPos err=0 currentPosition=0 14:59:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:09 Filter is already there-color wheel unchanged 14:59:09 Received message from Master: op=Shutter serial=146201 14:59:09 Shutter LASER close 14:59:09 Received message from Camera: op=State serial=146203 14:59:09 GetSingleValue result=40 Value=cccccccc 14:59:09 SkyScan query 14:59:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:59:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:10 Parameters OK 14:59:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:10 Set A/D data flow result=40 14:59:10 Set A/D channel type result=40 14:59:10 Set A/D encoding result=40 14:59:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:10 Set channel filter=0.000000e+000 result=40 14:59:10 Config A/D Result=40 14:59:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:10 Get A/D filter: -9.255963e+061 result=40 14:59:10 Get A/D value=-858993460 result=40 14:59:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:10 Parameters OK 14:59:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:10 Set A/D data flow result=40 14:59:10 Set A/D channel type result=40 14:59:10 Set A/D encoding result=40 14:59:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:10 Set channel filter=0.000000e+000 result=40 14:59:10 Config A/D Result=40 14:59:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:10 Get A/D filter: -9.255963e+061 result=40 14:59:10 Get A/D value=-858993460 result=40 14:59:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:10 Aux= 14:59:10 Message to Camera, serial 146203 queued 14:59:47 Received message from Master: op=PointingHead serial=146216 14:59:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:59:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:59:47 Point started: ret=0 14:59:47 point_skyscan result=0 14:59:48 Check angles 14:59:48 SkyScan query 14:59:49 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.04<-16536 Statuses=0009 0009 14:59:49 Msec=0 True Az=63.825 Ze=-68.04 Az status=0009 Ze status=0009 14:59:49 Check angles 14:59:49 SkyScan query 14:59:49 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.01<-17934 Statuses=0009 0009 14:59:49 Msec=750 True Az=81.345 Ze=-89.01 Az status=0009 Ze status=0009 14:59:49 Check angles 14:59:49 SkyScan query 14:59:50 SkyScan query done: ret=0 az=98.85<-6590 ze=-109.92<-19328 Statuses=0009 0009 14:59:50 Msec=1500 True Az=98.85 Ze=-109.92 Az status=0009 Ze status=0009 14:59:50 Check angles 14:59:50 SkyScan query 14:59:51 SkyScan query done: ret=0 az=116.28<-7752 ze=-130.935<-20729 Statuses=0009 0009 14:59:51 Msec=2250 True Az=116.28 Ze=-130.935 Az status=0009 Ze status=0009 14:59:51 Check angles 14:59:51 SkyScan query 14:59:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.57<-21438 Statuses=0009 0008 14:59:52 Msec=3000 True Az=130.995 Ze=-141.57 Az status=0009 Ze status=0008 14:59:52 Check angles 14:59:52 SkyScan query 14:59:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 14:59:52 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 14:59:52 Message to Master queued w/err=0: serial=146216 error=0 14:59:57 Received message from Master: op=Filter serial=146217 14:59:57 Color wheel filter change from 0 to 0 14:59:57 FLIGetFilterPos err=0 currentPosition=0 14:59:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:57 Filter is already there-color wheel unchanged 14:59:57 Received message from Master: op=Shutter serial=146218 14:59:57 Shutter LASER close 14:59:58 Received message from Camera: op=State serial=146220 14:59:58 GetSingleValue result=40 Value=cccccccc 14:59:58 SkyScan query 14:59:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:59:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:58 Parameters OK 14:59:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:58 Set A/D data flow result=40 14:59:58 Set A/D channel type result=40 14:59:58 Set A/D encoding result=40 14:59:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:58 Set channel filter=0.000000e+000 result=40 14:59:58 Config A/D Result=40 14:59:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:58 Get A/D filter: -9.255963e+061 result=40 14:59:58 Get A/D value=-858993460 result=40 14:59:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:58 Parameters OK 14:59:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:58 Set A/D data flow result=40 14:59:58 Set A/D channel type result=40 14:59:58 Set A/D encoding result=40 14:59:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:58 Set channel filter=0.000000e+000 result=40 14:59:58 Config A/D Result=40 14:59:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:58 Get A/D filter: -9.255963e+061 result=40 14:59:58 Get A/D value=-858993460 result=40 14:59:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:58 Aux= 14:59:58 Message to Camera, serial 146220 queued 15:00:35 Received message from Master: op=PointingHead serial=146233 15:00:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:00:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:00:35 Point started: ret=0 15:00:35 point_skyscan result=0 15:00:36 Check angles 15:00:36 SkyScan query 15:00:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0009 0009 15:00:37 Msec=0 True Az=112.995 Ze=-171.435 Az status=0009 Ze status=0009 15:00:37 Check angles 15:00:37 SkyScan query 15:00:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:00:37 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:00:37 Message to Master queued w/err=0: serial=146233 error=0 15:00:42 Received message from Master: op=Filter serial=146234 15:00:42 Color wheel filter change from 0 to 0 15:00:42 FLIGetFilterPos err=0 currentPosition=0 15:00:42 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:42 Filter is already there-color wheel unchanged 15:00:43 Received message from Master: op=Shutter serial=146235 15:00:43 Shutter LASER open 15:00:43 Received message from Camera: op=State serial=146237 15:00:43 GetSingleValue result=40 Value=cccccccc 15:00:43 SkyScan query 15:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:00:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:43 Parameters OK 15:00:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:43 Set A/D data flow result=40 15:00:43 Set A/D channel type result=40 15:00:43 Set A/D encoding result=40 15:00:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:43 Set channel filter=0.000000e+000 result=40 15:00:43 Config A/D Result=40 15:00:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:43 Get A/D filter: -9.255963e+061 result=40 15:00:43 Get A/D value=-858993460 result=40 15:00:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:43 Parameters OK 15:00:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:43 Set A/D data flow result=40 15:00:43 Set A/D channel type result=40 15:00:43 Set A/D encoding result=40 15:00:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:43 Set channel filter=0.000000e+000 result=40 15:00:43 Config A/D Result=40 15:00:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:43 Get A/D filter: -9.255963e+061 result=40 15:00:43 Get A/D value=-858993460 result=40 15:00:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:43 Aux= 15:00:43 Message to Camera, serial 146237 queued 15:00:52 Received message from Master: op=Shutter serial=146247 15:00:52 Shutter LASER close 15:00:52 Received message from Master: op=PointingHead serial=146251 15:00:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:00:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:00:53 Point started: ret=0 15:00:53 point_skyscan result=0 15:00:53 Check angles 15:00:53 SkyScan query 15:00:54 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.4<-21560 Statuses=0009 0009 15:00:54 Msec=0 True Az=135.945 Ze=-143.4 Az status=0009 Ze status=0009 15:00:54 Check angles 15:00:54 SkyScan query 15:00:55 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.385<-20159 Statuses=0009 0009 15:00:55 Msec=750 True Az=153.525 Ze=-122.385 Az status=0009 Ze status=0009 15:00:55 Check angles 15:00:55 SkyScan query 15:00:56 SkyScan query done: ret=0 az=171<-11400 ze=-101.505<-18767 Statuses=0009 0009 15:00:56 Msec=1500 True Az=171 Ze=-101.505 Az status=0009 Ze status=0009 15:00:56 Check angles 15:00:56 SkyScan query 15:00:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.505<-17367 Statuses=0008 0009 15:00:56 Msec=2250 True Az=176.01 Ze=-80.505 Az status=0008 Ze status=0009 15:00:56 Check angles 15:00:56 SkyScan query 15:00:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.565<-15971 Statuses=0008 0009 15:00:57 Msec=3000 True Az=175.995 Ze=-59.565 Az status=0008 Ze status=0009 15:00:57 Check angles 15:00:57 SkyScan query 15:00:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:00:58 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:00:58 Message to Master queued w/err=0: serial=146251 error=0 15:01:03 Received message from Master: op=Filter serial=146252 15:01:03 Color wheel filter change from 0 to 0 15:01:03 FLIGetFilterPos err=0 currentPosition=0 15:01:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:01:03 Filter is already there-color wheel unchanged 15:01:03 Received message from Master: op=Shutter serial=146253 15:01:03 Shutter LASER close 15:01:03 Received message from Camera: op=State serial=146255 15:01:03 GetSingleValue result=40 Value=cccccccc 15:01:03 SkyScan query 15:01:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:01:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:04 Parameters OK 15:01:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:04 Set A/D data flow result=40 15:01:04 Set A/D channel type result=40 15:01:04 Set A/D encoding result=40 15:01:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:04 Set channel filter=0.000000e+000 result=40 15:01:04 Config A/D Result=40 15:01:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:04 Get A/D filter: -9.255963e+061 result=40 15:01:04 Get A/D value=-858993460 result=40 15:01:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:04 Parameters OK 15:01:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:04 Set A/D data flow result=40 15:01:04 Set A/D channel type result=40 15:01:04 Set A/D encoding result=40 15:01:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:04 Set channel filter=0.000000e+000 result=40 15:01:04 Config A/D Result=40 15:01:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:04 Get A/D filter: -9.255963e+061 result=40 15:01:04 Get A/D value=-858993460 result=40 15:01:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:01:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:01:04 Aux= 15:01:04 Message to Camera, serial 146255 queued 15:01:41 Received message from Master: op=PointingHead serial=146268 15:01:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:01:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:01:41 Point started: ret=0 15:01:41 point_skyscan result=0 15:01:42 Check angles 15:01:42 SkyScan query 15:01:42 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.57<-13438 Statuses=0009 0009 15:01:42 Msec=0 True Az=152.775 Ze=-21.57 Az status=0009 Ze status=0009 15:01:42 Check angles 15:01:42 SkyScan query 15:01:43 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.615<-12041 Statuses=0009 0009 15:01:43 Msec=750 True Az=135.405 Ze=-0.615 Az status=0009 Ze status=0009 15:01:43 Check angles 15:01:43 SkyScan query 15:01:44 SkyScan query done: ret=0 az=117.795<-7853 ze=20.34<-10644 Statuses=0009 0009 15:01:44 Msec=1500 True Az=117.795 Ze=20.34 Az status=0009 Ze status=0009 15:01:44 Check angles 15:01:44 SkyScan query 15:01:45 SkyScan query done: ret=0 az=100.41<-6694 ze=41.325<-9245 Statuses=0009 0009 15:01:45 Msec=2250 True Az=100.41 Ze=41.325 Az status=0009 Ze status=0009 15:01:45 Check angles 15:01:45 SkyScan query 15:01:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 15:01:45 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 15:01:45 Check angles 15:01:45 SkyScan query 15:01:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:01:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:01:46 Message to Master queued w/err=0: serial=146268 error=0 15:01:51 Received message from Master: op=Filter serial=146269 15:01:51 Color wheel filter change from 0 to 0 15:01:51 FLIGetFilterPos err=0 currentPosition=0 15:01:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:01:51 Filter is already there-color wheel unchanged 15:01:51 Received message from Master: op=Shutter serial=146270 15:01:51 Shutter LASER close 15:01:51 Received message from Camera: op=State serial=146272 15:01:51 GetSingleValue result=40 Value=cccccccc 15:01:51 SkyScan query 15:01:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:01:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:52 Parameters OK 15:01:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:52 Set A/D data flow result=40 15:01:52 Set A/D channel type result=40 15:01:52 Set A/D encoding result=40 15:01:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:52 Set channel filter=0.000000e+000 result=40 15:01:52 Config A/D Result=40 15:01:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:52 Get A/D filter: -9.255963e+061 result=40 15:01:52 Get A/D value=-858993460 result=40 15:01:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:52 Parameters OK 15:01:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:52 Set A/D data flow result=40 15:01:52 Set A/D channel type result=40 15:01:52 Set A/D encoding result=40 15:01:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:52 Set channel filter=0.000000e+000 result=40 15:01:52 Config A/D Result=40 15:01:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:52 Get A/D filter: -9.255963e+061 result=40 15:01:52 Get A/D value=-858993460 result=40 15:01:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:01:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:01:52 Aux= 15:01:52 Message to Camera, serial 146272 queued 15:02:29 Received message from Master: op=PointingHead serial=146285 15:02:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:02:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:02:29 Point started: ret=0 15:02:29 point_skyscan result=0 15:02:30 Check angles 15:02:30 SkyScan query 15:02:30 SkyScan query done: ret=0 az=109.44<-7296 ze=38.49<-9434 Statuses=0009 0008 15:02:30 Msec=0 True Az=109.44 Ze=38.49 Az status=0009 Ze status=0008 15:02:31 Check angles 15:02:31 SkyScan query 15:02:31 SkyScan query done: ret=0 az=126.84<-8456 ze=38.505<-9433 Statuses=0009 0008 15:02:31 Msec=750 True Az=126.84 Ze=38.505 Az status=0009 Ze status=0008 15:02:31 Check angles 15:02:31 SkyScan query 15:02:32 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 15:02:32 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 15:02:32 Check angles 15:02:32 SkyScan query 15:02:33 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 15:02:33 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 15:02:33 Check angles 15:02:33 SkyScan query 15:02:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:02:33 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:02:34 Check angles 15:02:34 SkyScan query 15:02:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:02:34 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:02:34 Message to Master queued w/err=0: serial=146285 error=0 15:02:39 Received message from Master: op=Filter serial=146286 15:02:39 Color wheel filter change from 0 to 0 15:02:39 FLIGetFilterPos err=0 currentPosition=0 15:02:39 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:39 Filter is already there-color wheel unchanged 15:02:39 Received message from Master: op=Shutter serial=146287 15:02:39 Shutter LASER close 15:02:39 Received message from Camera: op=State serial=146289 15:02:39 GetSingleValue result=40 Value=cccccccc 15:02:39 SkyScan query 15:02:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:02:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:40 Parameters OK 15:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:40 Set A/D data flow result=40 15:02:40 Set A/D channel type result=40 15:02:40 Set A/D encoding result=40 15:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:40 Set channel filter=0.000000e+000 result=40 15:02:40 Config A/D Result=40 15:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:40 Get A/D filter: -9.255963e+061 result=40 15:02:40 Get A/D value=-858993460 result=40 15:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:40 Parameters OK 15:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:40 Set A/D data flow result=40 15:02:40 Set A/D channel type result=40 15:02:40 Set A/D encoding result=40 15:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:40 Set channel filter=0.000000e+000 result=40 15:02:40 Config A/D Result=40 15:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:40 Get A/D filter: -9.255963e+061 result=40 15:02:40 Get A/D value=-858993460 result=40 15:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:40 Aux= 15:02:40 Message to Camera, serial 146289 queued 15:03:17 Received message from Master: op=PointingHead serial=146302 15:03:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:03:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:03:17 Point started: ret=0 15:03:17 point_skyscan result=0 15:03:18 Check angles 15:03:18 SkyScan query 15:03:18 SkyScan query done: ret=0 az=152.745<-10183 ze=8.445<-11437 Statuses=0009 0009 15:03:18 Msec=0 True Az=152.745 Ze=8.445 Az status=0009 Ze status=0009 15:03:19 Check angles 15:03:19 SkyScan query 15:03:19 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.435<-12829 Statuses=0009 0009 15:03:19 Msec=750 True Az=135.33 Ze=-12.435 Az status=0009 Ze status=0009 15:03:19 Check angles 15:03:19 SkyScan query 15:03:20 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.45<-14230 Statuses=0009 0009 15:03:20 Msec=1500 True Az=117.78 Ze=-33.45 Az status=0009 Ze status=0009 15:03:20 Check angles 15:03:20 SkyScan query 15:03:21 SkyScan query done: ret=0 az=100.125<-6675 ze=-51.585<-15439 Statuses=0009 0009 15:03:21 Msec=2250 True Az=100.125 Ze=-51.585 Az status=0009 Ze status=0009 15:03:21 Check angles 15:03:21 SkyScan query 15:03:21 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 15:03:21 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 15:03:22 Check angles 15:03:22 SkyScan query 15:03:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:03:22 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:03:22 Message to Master queued w/err=0: serial=146302 error=0 15:03:27 Received message from Master: op=Filter serial=146303 15:03:27 Color wheel filter change from 0 to 0 15:03:27 FLIGetFilterPos err=0 currentPosition=0 15:03:27 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:27 Filter is already there-color wheel unchanged 15:03:27 Received message from Master: op=Shutter serial=146304 15:03:27 Shutter LASER close 15:03:27 Received message from Camera: op=State serial=146306 15:03:27 GetSingleValue result=40 Value=cccccccc 15:03:27 SkyScan query 15:03:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:03:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:28 Parameters OK 15:03:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:28 Set A/D data flow result=40 15:03:28 Set A/D channel type result=40 15:03:28 Set A/D encoding result=40 15:03:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:28 Set channel filter=0.000000e+000 result=40 15:03:28 Config A/D Result=40 15:03:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:28 Get A/D filter: -9.255963e+061 result=40 15:03:28 Get A/D value=-858993460 result=40 15:03:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:28 Parameters OK 15:03:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:28 Set A/D data flow result=40 15:03:28 Set A/D channel type result=40 15:03:28 Set A/D encoding result=40 15:03:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:28 Set channel filter=0.000000e+000 result=40 15:03:28 Config A/D Result=40 15:03:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:28 Get A/D filter: -9.255963e+061 result=40 15:03:28 Get A/D value=-858993460 result=40 15:03:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:28 Aux= 15:03:28 Message to Camera, serial 146306 queued 15:04:05 Received message from Master: op=PointingHead serial=146319 15:04:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:04:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:04:05 Point started: ret=0 15:04:05 point_skyscan result=0 15:04:06 Check angles 15:04:06 SkyScan query 15:04:07 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.09<-17406 Statuses=0009 0009 15:04:07 Msec=0 True Az=108.795 Ze=-81.09 Az status=0009 Ze status=0009 15:04:07 Check angles 15:04:07 SkyScan query 15:04:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.06<-18804 Statuses=0008 0009 15:04:07 Msec=750 True Az=112.995 Ze=-102.06 Az status=0008 Ze status=0009 15:04:07 Check angles 15:04:07 SkyScan query 15:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 15:04:08 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 15:04:08 Check angles 15:04:08 SkyScan query 15:04:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.97<-21598 Statuses=0008 0009 15:04:09 Msec=2250 True Az=112.995 Ze=-143.97 Az status=0008 Ze status=0009 15:04:09 Check angles 15:04:09 SkyScan query 15:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.925<-22995 Statuses=0008 0009 15:04:10 Msec=3000 True Az=112.995 Ze=-164.925 Az status=0008 Ze status=0009 15:04:10 Check angles 15:04:10 SkyScan query 15:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 15:04:10 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 15:04:10 Message to Master queued w/err=0: serial=146319 error=0 15:04:15 Received message from Master: op=Filter serial=146320 15:04:15 Color wheel filter change from 0 to 0 15:04:15 FLIGetFilterPos err=0 currentPosition=0 15:04:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:15 Filter is already there-color wheel unchanged 15:04:15 Received message from Master: op=Shutter serial=146321 15:04:15 Shutter LASER open 15:04:16 Received message from Camera: op=State serial=146323 15:04:16 GetSingleValue result=40 Value=cccccccc 15:04:16 SkyScan query 15:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:04:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:16 Parameters OK 15:04:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:16 Set A/D data flow result=40 15:04:16 Set A/D channel type result=40 15:04:16 Set A/D encoding result=40 15:04:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:16 Set channel filter=0.000000e+000 result=40 15:04:16 Config A/D Result=40 15:04:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:16 Get A/D filter: -9.255963e+061 result=40 15:04:16 Get A/D value=-858993460 result=40 15:04:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:16 Parameters OK 15:04:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:16 Set A/D data flow result=40 15:04:16 Set A/D channel type result=40 15:04:16 Set A/D encoding result=40 15:04:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:16 Set channel filter=0.000000e+000 result=40 15:04:16 Config A/D Result=40 15:04:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:16 Get A/D filter: -9.255963e+061 result=40 15:04:16 Get A/D value=-858993460 result=40 15:04:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:16 Aux= 15:04:16 Message to Camera, serial 146323 queued 15:04:25 Received message from Master: op=Shutter serial=146333 15:04:25 Shutter LASER close 15:04:25 Received message from Master: op=PointingHead serial=146337 15:04:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:04:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:04:25 Point started: ret=0 15:04:25 point_skyscan result=0 15:04:26 Check angles 15:04:26 SkyScan query 15:04:27 SkyScan query done: ret=0 az=89.52<-5968 ze=156.78<-1548 Statuses=0009 0009 15:04:27 Msec=0 True Az=89.52 Ze=156.78 Az status=0009 Ze status=0009 15:04:27 Check angles 15:04:27 SkyScan query 15:04:28 SkyScan query done: ret=0 az=72<-4800 ze=135.825<-2945 Statuses=0009 0009 15:04:28 Msec=750 True Az=72 Ze=135.825 Az status=0009 Ze status=0009 15:04:28 Check angles 15:04:28 SkyScan query 15:04:28 SkyScan query done: ret=0 az=54.645<-3643 ze=114.84<-4344 Statuses=0009 0009 15:04:28 Msec=1500 True Az=54.645 Ze=114.84 Az status=0009 Ze status=0009 15:04:28 Check angles 15:04:28 SkyScan query 15:04:29 SkyScan query done: ret=0 az=40.965<-2731 ze=93.9<-5740 Statuses=0009 0009 15:04:29 Msec=2250 True Az=40.965 Ze=93.9 Az status=0009 Ze status=0009 15:04:29 Check angles 15:04:29 SkyScan query 15:04:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.945<-7137 Statuses=0008 0009 15:04:30 Msec=3000 True Az=40.995 Ze=72.945 Az status=0008 Ze status=0009 15:04:30 Check angles 15:04:30 SkyScan query 15:04:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 15:04:31 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 15:04:31 Check angles 15:04:31 SkyScan query 15:04:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:04:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:04:31 Message to Master queued w/err=0: serial=146337 error=0 15:04:36 Received message from Master: op=Filter serial=146338 15:04:36 Color wheel filter change from 0 to 0 15:04:36 FLIGetFilterPos err=0 currentPosition=0 15:04:36 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:36 Filter is already there-color wheel unchanged 15:04:36 Received message from Master: op=Shutter serial=146339 15:04:36 Shutter LASER close 15:04:37 Received message from Camera: op=State serial=146341 15:04:37 GetSingleValue result=40 Value=cccccccc 15:04:37 SkyScan query 15:04:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:04:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:37 Parameters OK 15:04:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:37 Set A/D data flow result=40 15:04:37 Set A/D channel type result=40 15:04:37 Set A/D encoding result=40 15:04:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:37 Set channel filter=0.000000e+000 result=40 15:04:37 Config A/D Result=40 15:04:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:37 Get A/D filter: -9.255963e+061 result=40 15:04:37 Get A/D value=-858993460 result=40 15:04:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:37 Parameters OK 15:04:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:37 Set A/D data flow result=40 15:04:37 Set A/D channel type result=40 15:04:37 Set A/D encoding result=40 15:04:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:37 Set channel filter=0.000000e+000 result=40 15:04:37 Config A/D Result=40 15:04:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:37 Get A/D filter: -9.255963e+061 result=40 15:04:37 Get A/D value=-858993460 result=40 15:04:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:37 Aux= 15:04:37 Message to Camera, serial 146341 queued 15:05:14 Received message from Master: op=PointingHead serial=146354 15:05:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:05:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:05:14 Point started: ret=0 15:05:14 point_skyscan result=0 15:05:15 Check angles 15:05:15 SkyScan query 15:05:16 SkyScan query done: ret=0 az=64.35<-4290 ze=66.54<-7564 Statuses=0009 0008 15:05:16 Msec=0 True Az=64.35 Ze=66.54 Az status=0009 Ze status=0008 15:05:16 Check angles 15:05:16 SkyScan query 15:05:16 SkyScan query done: ret=0 az=81.78<-5452 ze=66.51<-7566 Statuses=0009 0008 15:05:16 Msec=750 True Az=81.78 Ze=66.51 Az status=0009 Ze status=0008 15:05:17 Check angles 15:05:17 SkyScan query 15:05:17 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 15:05:17 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 15:05:17 Check angles 15:05:17 SkyScan query 15:05:18 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 15:05:18 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 15:05:18 Check angles 15:05:18 SkyScan query 15:05:19 SkyScan query done: ret=0 az=134.34<-8956 ze=66.495<-7567 Statuses=0009 0008 15:05:19 Msec=3000 True Az=134.34 Ze=66.495 Az status=0009 Ze status=0008 15:05:19 Check angles 15:05:19 SkyScan query 15:05:19 SkyScan query done: ret=0 az=152.115<-10141 ze=66.495<-7567 Statuses=0009 0008 15:05:19 Msec=3750 True Az=152.115 Ze=66.495 Az status=0009 Ze status=0008 15:05:20 Check angles 15:05:20 SkyScan query 15:05:20 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:05:20 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:05:20 Message to Master queued w/err=0: serial=146354 error=0 15:05:25 Received message from Master: op=Filter serial=146355 15:05:25 Color wheel filter change from 0 to 0 15:05:25 FLIGetFilterPos err=0 currentPosition=0 15:05:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:25 Filter is already there-color wheel unchanged 15:05:25 Received message from Master: op=Shutter serial=146356 15:05:25 Shutter LASER close 15:05:25 Received message from Camera: op=State serial=146358 15:05:25 GetSingleValue result=40 Value=cccccccc 15:05:25 SkyScan query 15:05:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:05:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:26 Parameters OK 15:05:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:26 Set A/D data flow result=40 15:05:26 Set A/D channel type result=40 15:05:26 Set A/D encoding result=40 15:05:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:26 Set channel filter=0.000000e+000 result=40 15:05:26 Config A/D Result=40 15:05:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:26 Get A/D filter: -9.255963e+061 result=40 15:05:26 Get A/D value=-858993460 result=40 15:05:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:26 Parameters OK 15:05:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:26 Set A/D data flow result=40 15:05:26 Set A/D channel type result=40 15:05:26 Set A/D encoding result=40 15:05:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:26 Set channel filter=0.000000e+000 result=40 15:05:26 Config A/D Result=40 15:05:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:26 Get A/D filter: -9.255963e+061 result=40 15:05:26 Get A/D value=-858993460 result=40 [UTC 2018-12-14 15:05:26] 15:05:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:26 Aux= 15:05:26 Message to Camera, serial 146358 queued 15:06:03 Received message from Master: op=PointingHead serial=146371 15:06:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:06:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:06:03 Point started: ret=0 15:06:03 point_skyscan result=0 15:06:04 Check angles 15:06:04 SkyScan query 15:06:04 SkyScan query done: ret=0 az=135.105<-9007 ze=36.855<-9543 Statuses=0009 0009 15:06:04 Msec=0 True Az=135.105 Ze=36.855 Az status=0009 Ze status=0009 15:06:05 Check angles 15:06:05 SkyScan query 15:06:05 SkyScan query done: ret=0 az=117.645<-7843 ze=15.93<-10938 Statuses=0009 0009 15:06:05 Msec=750 True Az=117.645 Ze=15.93 Az status=0009 Ze status=0009 15:06:05 Check angles 15:06:05 SkyScan query 15:06:06 SkyScan query done: ret=0 az=100.29<-6686 ze=-5.025<-12335 Statuses=0009 0009 15:06:06 Msec=1500 True Az=100.29 Ze=-5.025 Az status=0009 Ze status=0009 15:06:06 Check angles 15:06:06 SkyScan query 15:06:07 SkyScan query done: ret=0 az=82.68<-5512 ze=-25.995<-13733 Statuses=0009 0009 15:06:07 Msec=2250 True Az=82.68 Ze=-25.995 Az status=0009 Ze status=0009 15:06:07 Check angles 15:06:07 SkyScan query 15:06:07 SkyScan query done: ret=0 az=64.815<-4321 ze=-38.595<-14573 Statuses=0009 0008 15:06:07 Msec=3000 True Az=64.815 Ze=-38.595 Az status=0009 Ze status=0008 15:06:08 Check angles 15:06:08 SkyScan query 15:06:08 SkyScan query done: ret=0 az=47.4<-3160 ze=-38.52<-14568 Statuses=0009 0008 15:06:08 Msec=3750 True Az=47.4 Ze=-38.52 Az status=0009 Ze status=0008 15:06:08 Check angles 15:06:08 SkyScan query 15:06:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:06:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:06:09 Message to Master queued w/err=0: serial=146371 error=0 15:06:14 Received message from Master: op=Filter serial=146372 15:06:14 Color wheel filter change from 0 to 0 15:06:14 FLIGetFilterPos err=0 currentPosition=0 15:06:14 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:14 Filter is already there-color wheel unchanged 15:06:14 Received message from Master: op=Shutter serial=146373 15:06:14 Shutter LASER close 15:06:14 Received message from Camera: op=State serial=146375 15:06:14 GetSingleValue result=40 Value=cccccccc 15:06:14 SkyScan query 15:06:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:06:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:15 Parameters OK 15:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:15 Set A/D data flow result=40 15:06:15 Set A/D channel type result=40 15:06:15 Set A/D encoding result=40 15:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:15 Set channel filter=0.000000e+000 result=40 15:06:15 Config A/D Result=40 15:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:15 Get A/D filter: -9.255963e+061 result=40 15:06:15 Get A/D value=-858993460 result=40 15:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:15 Parameters OK 15:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:15 Set A/D data flow result=40 15:06:15 Set A/D channel type result=40 15:06:15 Set A/D encoding result=40 15:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:15 Set channel filter=0.000000e+000 result=40 15:06:15 Config A/D Result=40 15:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:15 Get A/D filter: -9.255963e+061 result=40 15:06:15 Get A/D value=-858993460 result=40 15:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:15 Aux= 15:06:15 Message to Camera, serial 146375 queued 15:06:51 Received message from Master: op=PointingHead serial=146387 15:06:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:06:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:06:51 Point started: ret=0 15:06:51 point_skyscan result=0 15:06:52 Check angles 15:06:52 SkyScan query 15:06:52 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.415<-16561 Statuses=0009 0009 15:06:52 Msec=0 True Az=64.095 Ze=-68.415 Az status=0009 Ze status=0009 15:06:53 Check angles 15:06:53 SkyScan query 15:06:53 SkyScan query done: ret=0 az=81.975<-5465 ze=-89.775<-17985 Statuses=0009 0009 15:06:53 Msec=750 True Az=81.975 Ze=-89.775 Az status=0009 Ze status=0009 15:06:53 Check angles 15:06:53 SkyScan query 15:06:54 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.775<-19385 Statuses=0009 0009 15:06:54 Msec=1500 True Az=99.435 Ze=-110.775 Az status=0009 Ze status=0009 15:06:54 Check angles 15:06:54 SkyScan query 15:06:55 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.7<-20780 Statuses=0009 0009 15:06:55 Msec=2250 True Az=116.82 Ze=-131.7 Az status=0009 Ze status=0009 15:06:55 Check angles 15:06:55 SkyScan query 15:06:55 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 15:06:55 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 15:06:56 Check angles 15:06:56 SkyScan query 15:06:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 15:06:56 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 15:06:56 Message to Master queued w/err=0: serial=146387 error=0 15:07:01 Received message from Master: op=Filter serial=146388 15:07:01 Color wheel filter change from 0 to 0 15:07:01 FLIGetFilterPos err=0 currentPosition=0 15:07:01 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:01 Filter is already there-color wheel unchanged 15:07:01 Received message from Master: op=Shutter serial=146389 15:07:01 Shutter LASER close 15:07:01 Received message from Camera: op=State serial=146391 15:07:01 GetSingleValue result=40 Value=cccccccc 15:07:01 SkyScan query 15:07:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:07:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:02 Parameters OK 15:07:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:02 Set A/D data flow result=40 15:07:02 Set A/D channel type result=40 15:07:02 Set A/D encoding result=40 15:07:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:02 Set channel filter=0.000000e+000 result=40 15:07:02 Config A/D Result=40 15:07:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:02 Get A/D filter: -9.255963e+061 result=40 15:07:02 Get A/D value=-858993460 result=40 15:07:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:02 Parameters OK 15:07:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:02 Set A/D data flow result=40 15:07:02 Set A/D channel type result=40 15:07:02 Set A/D encoding result=40 15:07:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:02 Set channel filter=0.000000e+000 result=40 15:07:02 Config A/D Result=40 15:07:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:02 Get A/D filter: -9.255963e+061 result=40 15:07:02 Get A/D value=-858993460 result=40 15:07:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:02 Aux= 15:07:02 Message to Camera, serial 146391 queued 15:07:39 Received message from Master: op=PointingHead serial=146404 15:07:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:07:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:07:39 Point started: ret=0 15:07:39 point_skyscan result=0 15:07:40 Check angles 15:07:40 SkyScan query 15:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.345<-23423 Statuses=0009 0009 15:07:41 Msec=0 True Az=112.995 Ze=-171.345 Az status=0009 Ze status=0009 15:07:41 Check angles 15:07:41 SkyScan query 15:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:07:41 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:07:41 Message to Master queued w/err=0: serial=146404 error=0 15:07:46 Received message from Master: op=Filter serial=146405 15:07:46 Color wheel filter change from 0 to 0 15:07:46 FLIGetFilterPos err=0 currentPosition=0 15:07:46 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:46 Filter is already there-color wheel unchanged 15:07:46 Received message from Master: op=Shutter serial=146406 15:07:46 Shutter LASER open 15:07:47 Received message from Camera: op=State serial=146408 15:07:47 GetSingleValue result=40 Value=cccccccc 15:07:47 SkyScan query 15:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:07:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:47 Parameters OK 15:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:47 Set A/D data flow result=40 15:07:47 Set A/D channel type result=40 15:07:47 Set A/D encoding result=40 15:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:47 Set channel filter=0.000000e+000 result=40 15:07:47 Config A/D Result=40 15:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:47 Get A/D filter: -9.255963e+061 result=40 15:07:47 Get A/D value=-858993460 result=40 15:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:47 Parameters OK 15:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:47 Set A/D data flow result=40 15:07:47 Set A/D channel type result=40 15:07:47 Set A/D encoding result=40 15:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:47 Set channel filter=0.000000e+000 result=40 15:07:47 Config A/D Result=40 15:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:47 Get A/D filter: -9.255963e+061 result=40 15:07:47 Get A/D value=-858993460 result=40 15:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:47 Aux= 15:07:47 Message to Camera, serial 146408 queued 15:07:56 Received message from Master: op=Shutter serial=146418 15:07:56 Shutter LASER close 15:07:56 Received message from Master: op=PointingHead serial=146422 15:07:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:07:56 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:07:57 Point started: ret=0 15:07:57 point_skyscan result=0 15:07:57 Check angles 15:07:57 SkyScan query 15:07:58 SkyScan query done: ret=0 az=136.485<-9099 ze=-142.83<-21522 Statuses=0009 0009 15:07:58 Msec=0 True Az=136.485 Ze=-142.83 Az status=0009 Ze status=0009 15:07:58 Check angles 15:07:58 SkyScan query 15:07:59 SkyScan query done: ret=0 az=154.02<-10268 ze=-121.845<-20123 Statuses=0009 0009 15:07:59 Msec=750 True Az=154.02 Ze=-121.845 Az status=0009 Ze status=0009 15:07:59 Check angles 15:07:59 SkyScan query 15:07:59 SkyScan query done: ret=0 az=171.915<-11461 ze=-100.365<-18691 Statuses=0009 0009 15:07:59 Msec=1500 True Az=171.915 Ze=-100.365 Az status=0009 Ze status=0009 15:08:00 Check angles 15:08:00 SkyScan query 15:08:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.44<-17296 Statuses=0008 0009 15:08:00 Msec=2250 True Az=176.01 Ze=-79.44 Az status=0008 Ze status=0009 15:08:00 Check angles 15:08:00 SkyScan query 15:08:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.47<-15898 Statuses=0008 0009 15:08:01 Msec=3000 True Az=176.01 Ze=-58.47 Az status=0008 Ze status=0009 15:08:01 Check angles 15:08:01 SkyScan query 15:08:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 15:08:02 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 15:08:02 Message to Master queued w/err=0: serial=146422 error=0 15:08:07 Received message from Master: op=Filter serial=146423 15:08:07 Color wheel filter change from 0 to 0 15:08:07 FLIGetFilterPos err=0 currentPosition=0 15:08:07 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:07 Filter is already there-color wheel unchanged 15:08:07 Received message from Master: op=Shutter serial=146424 15:08:07 Shutter LASER close 15:08:07 Received message from Camera: op=State serial=146426 15:08:07 GetSingleValue result=40 Value=cccccccc 15:08:07 SkyScan query 15:08:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:08:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:08 Parameters OK 15:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:08 Set A/D data flow result=40 15:08:08 Set A/D channel type result=40 15:08:08 Set A/D encoding result=40 15:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:08 Set channel filter=0.000000e+000 result=40 15:08:08 Config A/D Result=40 15:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:08 Get A/D filter: -9.255963e+061 result=40 15:08:08 Get A/D value=-858993460 result=40 15:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:08 Parameters OK 15:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:08 Set A/D data flow result=40 15:08:08 Set A/D channel type result=40 15:08:08 Set A/D encoding result=40 15:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:08 Set channel filter=0.000000e+000 result=40 15:08:08 Config A/D Result=40 15:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:08 Get A/D filter: -9.255963e+061 result=40 15:08:08 Get A/D value=-858993460 result=40 15:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:08 Aux= 15:08:08 Message to Camera, serial 146426 queued 15:08:44 Received message from Master: op=PointingHead serial=146439 15:08:44 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:08:44 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:08:45 Point started: ret=0 15:08:45 point_skyscan result=0 15:08:46 Check angles 15:08:46 SkyScan query 15:08:46 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.36<-13424 Statuses=0009 0009 15:08:46 Msec=0 True Az=152.73 Ze=-21.36 Az status=0009 Ze status=0009 15:08:46 Check angles 15:08:46 SkyScan query 15:08:47 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.42<-12028 Statuses=0009 0009 15:08:47 Msec=750 True Az=135.165 Ze=-0.42 Az status=0009 Ze status=0009 15:08:47 Check angles 15:08:47 SkyScan query 15:08:48 SkyScan query done: ret=0 az=117.6<-7840 ze=20.535<-10631 Statuses=0009 0009 15:08:48 Msec=1500 True Az=117.6 Ze=20.535 Az status=0009 Ze status=0009 15:08:48 Check angles 15:08:48 SkyScan query 15:08:48 SkyScan query done: ret=0 az=100.215<-6681 ze=41.52<-9232 Statuses=0009 0009 15:08:48 Msec=2250 True Az=100.215 Ze=41.52 Az status=0009 Ze status=0009 15:08:49 Check angles 15:08:49 SkyScan query 15:08:49 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:08:49 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:08:49 Check angles 15:08:49 SkyScan query 15:08:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:08:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:08:50 Message to Master queued w/err=0: serial=146439 error=0 15:08:55 Received message from Master: op=Filter serial=146440 15:08:55 Color wheel filter change from 0 to 0 15:08:55 FLIGetFilterPos err=0 currentPosition=0 15:08:55 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:55 Filter is already there-color wheel unchanged 15:08:55 Received message from Master: op=Shutter serial=146441 15:08:55 Shutter LASER close 15:08:55 Received message from Camera: op=State serial=146443 15:08:55 GetSingleValue result=40 Value=cccccccc 15:08:55 SkyScan query 15:08:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:08:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:56 Parameters OK 15:08:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:56 Set A/D data flow result=40 15:08:56 Set A/D channel type result=40 15:08:56 Set A/D encoding result=40 15:08:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:56 Set channel filter=0.000000e+000 result=40 15:08:56 Config A/D Result=40 15:08:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:56 Get A/D filter: -9.255963e+061 result=40 15:08:56 Get A/D value=-858993460 result=40 15:08:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:56 Parameters OK 15:08:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:56 Set A/D data flow result=40 15:08:56 Set A/D channel type result=40 15:08:56 Set A/D encoding result=40 15:08:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:56 Set channel filter=0.000000e+000 result=40 15:08:56 Config A/D Result=40 15:08:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:56 Get A/D filter: -9.255963e+061 result=40 15:08:56 Get A/D value=-858993460 result=40 15:08:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:56 Aux= 15:08:56 Message to Camera, serial 146443 queued 15:09:33 Received message from Master: op=PointingHead serial=146456 15:09:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:09:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:09:33 Point started: ret=0 15:09:33 point_skyscan result=0 15:09:34 Check angles 15:09:34 SkyScan query 15:09:34 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 15:09:34 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 15:09:34 Check angles 15:09:34 SkyScan query 15:09:35 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 15:09:35 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 15:09:35 Check angles 15:09:35 SkyScan query 15:09:36 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 15:09:36 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 15:09:36 Check angles 15:09:36 SkyScan query 15:09:36 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 15:09:36 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 15:09:37 Check angles 15:09:37 SkyScan query 15:09:37 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:09:37 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:09:37 Check angles 15:09:37 SkyScan query 15:09:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:09:38 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:09:38 Message to Master queued w/err=0: serial=146456 error=0 15:09:43 Received message from Master: op=Filter serial=146457 15:09:43 Color wheel filter change from 0 to 0 15:09:43 FLIGetFilterPos err=0 currentPosition=0 15:09:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:43 Filter is already there-color wheel unchanged 15:09:43 Received message from Master: op=Shutter serial=146458 15:09:43 Shutter LASER close 15:09:43 Received message from Camera: op=State serial=146460 15:09:43 GetSingleValue result=40 Value=cccccccc 15:09:43 SkyScan query 15:09:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:09:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:44 Parameters OK 15:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:44 Set A/D data flow result=40 15:09:44 Set A/D channel type result=40 15:09:44 Set A/D encoding result=40 15:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:44 Set channel filter=0.000000e+000 result=40 15:09:44 Config A/D Result=40 15:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:44 Get A/D filter: -9.255963e+061 result=40 15:09:44 Get A/D value=-858993460 result=40 15:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:44 Parameters OK 15:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:44 Set A/D data flow result=40 15:09:44 Set A/D channel type result=40 15:09:44 Set A/D encoding result=40 15:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:44 Set channel filter=0.000000e+000 result=40 15:09:44 Config A/D Result=40 15:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:44 Get A/D filter: -9.255963e+061 result=40 15:09:44 Get A/D value=-858993460 result=40 15:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:44 Aux= 15:09:44 Message to Camera, serial 146460 queued 15:10:21 Received message from Master: op=PointingHead serial=146473 15:10:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:10:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:10:21 Point started: ret=0 15:10:21 point_skyscan result=0 15:10:22 Check angles 15:10:22 SkyScan query 15:10:22 SkyScan query done: ret=0 az=153.18<-10212 ze=8.985<-11401 Statuses=0009 0009 15:10:22 Msec=0 True Az=153.18 Ze=8.985 Az status=0009 Ze status=0009 15:10:22 Check angles 15:10:22 SkyScan query 15:10:23 SkyScan query done: ret=0 az=135.765<-9051 ze=-12.045<-12803 Statuses=0009 0009 15:10:23 Msec=750 True Az=135.765 Ze=-12.045 Az status=0009 Ze status=0009 15:10:23 Check angles 15:10:23 SkyScan query 15:10:24 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.405<-14227 Statuses=0009 0009 15:10:24 Msec=1500 True Az=117.795 Ze=-33.405 Az status=0009 Ze status=0009 15:10:24 Check angles 15:10:24 SkyScan query 15:10:25 SkyScan query done: ret=0 az=100.47<-6698 ze=-51.555<-15437 Statuses=0009 0009 15:10:25 Msec=2250 True Az=100.47 Ze=-51.555 Az status=0009 Ze status=0009 15:10:25 Check angles 15:10:25 SkyScan query 15:10:25 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 15:10:25 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 15:10:25 Check angles 15:10:25 SkyScan query 15:10:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:10:26 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:10:26 Message to Master queued w/err=0: serial=146473 error=0 15:10:31 Received message from Master: op=Filter serial=146474 15:10:31 Color wheel filter change from 0 to 0 15:10:31 FLIGetFilterPos err=0 currentPosition=0 15:10:31 FLIGetStepsRemaining err=0 RemainingSteps=0 15:10:31 Filter is already there-color wheel unchanged 15:10:31 Received message from Master: op=Shutter serial=146475 15:10:31 Shutter LASER close 15:10:31 Received message from Camera: op=State serial=146477 15:10:31 GetSingleValue result=40 Value=cccccccc 15:10:31 SkyScan query 15:10:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:10:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:32 Parameters OK 15:10:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:32 Set A/D data flow result=40 15:10:32 Set A/D channel type result=40 15:10:32 Set A/D encoding result=40 15:10:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:32 Set channel filter=0.000000e+000 result=40 15:10:32 Config A/D Result=40 15:10:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:32 Get A/D filter: -9.255963e+061 result=40 15:10:32 Get A/D value=-858993460 result=40 15:10:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:32 Parameters OK 15:10:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:32 Set A/D data flow result=40 15:10:32 Set A/D channel type result=40 15:10:32 Set A/D encoding result=40 15:10:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:32 Set channel filter=0.000000e+000 result=40 15:10:32 Config A/D Result=40 15:10:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:32 Get A/D filter: -9.255963e+061 result=40 15:10:32 Get A/D value=-858993460 result=40 15:10:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:10:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:10:32 Aux= 15:10:32 Message to Camera, serial 146477 queued 15:11:09 Received message from Master: op=PointingHead serial=146490 15:11:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:11:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:11:09 Point started: ret=0 15:11:09 point_skyscan result=0 15:11:10 Check angles 15:11:10 SkyScan query 15:11:10 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.54<-17436 Statuses=0009 0009 15:11:10 Msec=0 True Az=109.185 Ze=-81.54 Az status=0009 Ze status=0009 15:11:11 Check angles 15:11:11 SkyScan query 15:11:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 15:11:11 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 15:11:11 Check angles 15:11:11 SkyScan query 15:11:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 15:11:12 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 15:11:12 Check angles 15:11:12 SkyScan query 15:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 15:11:13 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 15:11:13 Check angles 15:11:13 SkyScan query 15:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 15:11:13 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 15:11:14 Check angles 15:11:14 SkyScan query 15:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 15:11:14 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 15:11:14 Message to Master queued w/err=0: serial=146490 error=0 15:11:19 Received message from Master: op=Filter serial=146491 15:11:19 Color wheel filter change from 0 to 0 15:11:19 FLIGetFilterPos err=0 currentPosition=0 15:11:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:19 Filter is already there-color wheel unchanged 15:11:19 Received message from Master: op=Shutter serial=146492 15:11:19 Shutter LASER open 15:11:20 Received message from Camera: op=State serial=146494 15:11:20 GetSingleValue result=40 Value=cccccccc 15:11:20 SkyScan query 15:11:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:11:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:20 Parameters OK 15:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:20 Set A/D data flow result=40 15:11:20 Set A/D channel type result=40 15:11:20 Set A/D encoding result=40 15:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:20 Set channel filter=0.000000e+000 result=40 15:11:20 Config A/D Result=40 15:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:20 Get A/D filter: -9.255963e+061 result=40 15:11:20 Get A/D value=-858993460 result=40 15:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:20 Parameters OK 15:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:20 Set A/D data flow result=40 15:11:20 Set A/D channel type result=40 15:11:20 Set A/D encoding result=40 15:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:20 Set channel filter=0.000000e+000 result=40 15:11:20 Config A/D Result=40 15:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:20 Get A/D filter: -9.255963e+061 result=40 15:11:20 Get A/D value=-858993460 result=40 15:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:20 Aux= 15:11:20 Message to Camera, serial 146494 queued 15:11:29 Received message from Master: op=Shutter serial=146504 15:11:29 Shutter LASER close 15:11:29 Received message from Master: op=PointingHead serial=146508 15:11:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:11:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:11:29 Point started: ret=0 15:11:29 point_skyscan result=0 15:11:30 Check angles 15:11:30 SkyScan query 15:11:31 SkyScan query done: ret=0 az=89.58<-5972 ze=156.72<-1552 Statuses=0009 0009 15:11:31 Msec=0 True Az=89.58 Ze=156.72 Az status=0009 Ze status=0009 15:11:31 Check angles 15:11:31 SkyScan query 15:11:31 SkyScan query done: ret=0 az=72<-4800 ze=135.87<-2942 Statuses=0009 0009 15:11:31 Msec=750 True Az=72 Ze=135.87 Az status=0009 Ze status=0009 15:11:32 Check angles 15:11:32 SkyScan query 15:11:32 SkyScan query done: ret=0 az=54.3<-3620 ze=114.42<-4372 Statuses=0009 0009 15:11:32 Msec=1500 True Az=54.3 Ze=114.42 Az status=0009 Ze status=0009 15:11:32 Check angles 15:11:32 SkyScan query 15:11:33 SkyScan query done: ret=0 az=40.965<-2731 ze=93.09<-5794 Statuses=0009 0009 15:11:33 Msec=2250 True Az=40.965 Ze=93.09 Az status=0009 Ze status=0009 15:11:33 Check angles 15:11:33 SkyScan query 15:11:34 SkyScan query done: ret=0 az=40.995<-2733 ze=71.7<-7220 Statuses=0008 0009 15:11:34 Msec=3000 True Az=40.995 Ze=71.7 Az status=0008 Ze status=0009 15:11:34 Check angles 15:11:34 SkyScan query 15:11:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.96<-8536 Statuses=0008 0009 15:11:34 Msec=3750 True Az=40.995 Ze=51.96 Az status=0008 Ze status=0009 15:11:35 Check angles 15:11:35 SkyScan query 15:11:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:11:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:11:35 Message to Master queued w/err=0: serial=146508 error=0 15:11:40 Received message from Master: op=Filter serial=146509 15:11:40 Color wheel filter change from 0 to 0 15:11:40 FLIGetFilterPos err=0 currentPosition=0 15:11:40 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:40 Filter is already there-color wheel unchanged 15:11:40 Received message from Master: op=Shutter serial=146510 15:11:40 Shutter LASER close 15:11:41 Received message from Camera: op=State serial=146512 15:11:41 GetSingleValue result=40 Value=cccccccc 15:11:41 SkyScan query 15:11:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:11:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:41 Parameters OK 15:11:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:41 Set A/D data flow result=40 15:11:41 Set A/D channel type result=40 15:11:41 Set A/D encoding result=40 15:11:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:41 Set channel filter=0.000000e+000 result=40 15:11:41 Config A/D Result=40 15:11:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:41 Get A/D filter: -9.255963e+061 result=40 15:11:41 Get A/D value=-858993460 result=40 15:11:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:41 Parameters OK 15:11:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:41 Set A/D data flow result=40 15:11:41 Set A/D channel type result=40 15:11:41 Set A/D encoding result=40 15:11:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:41 Set channel filter=0.000000e+000 result=40 15:11:41 Config A/D Result=40 15:11:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:41 Get A/D filter: -9.255963e+061 result=40 15:11:41 Get A/D value=-858993460 result=40 15:11:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:41 Aux= 15:11:41 Message to Camera, serial 146512 queued 15:12:18 Received message from Master: op=PointingHead serial=146525 15:12:18 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:12:18 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:12:18 Point started: ret=0 15:12:18 point_skyscan result=0 15:12:19 Check angles 15:12:19 SkyScan query 15:12:20 SkyScan query done: ret=0 az=64.185<-4279 ze=66.555<-7563 Statuses=0009 0008 15:12:20 Msec=0 True Az=64.185 Ze=66.555 Az status=0009 Ze status=0008 15:12:20 Check angles 15:12:20 SkyScan query 15:12:20 SkyScan query done: ret=0 az=82.095<-5473 ze=66.495<-7567 Statuses=0009 0008 15:12:20 Msec=750 True Az=82.095 Ze=66.495 Az status=0009 Ze status=0008 15:12:21 Check angles 15:12:21 SkyScan query 15:12:21 SkyScan query done: ret=0 az=99.51<-6634 ze=66.495<-7567 Statuses=0009 0008 15:12:21 Msec=1500 True Az=99.51 Ze=66.495 Az status=0009 Ze status=0008 15:12:21 Check angles 15:12:21 SkyScan query 15:12:22 SkyScan query done: ret=0 az=117.405<-7827 ze=66.495<-7567 Statuses=0009 0008 15:12:22 Msec=2250 True Az=117.405 Ze=66.495 Az status=0009 Ze status=0008 15:12:22 Check angles 15:12:22 SkyScan query 15:12:23 SkyScan query done: ret=0 az=134.985<-8999 ze=66.495<-7567 Statuses=0009 0008 15:12:23 Msec=3000 True Az=134.985 Ze=66.495 Az status=0009 Ze status=0008 15:12:23 Check angles 15:12:23 SkyScan query 15:12:23 SkyScan query done: ret=0 az=152.325<-10155 ze=66.495<-7567 Statuses=0009 0008 15:12:23 Msec=3750 True Az=152.325 Ze=66.495 Az status=0009 Ze status=0008 15:12:24 Check angles 15:12:24 SkyScan query 15:12:24 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:12:24 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:12:24 Message to Master queued w/err=0: serial=146525 error=0 15:12:29 Received message from Master: op=Filter serial=146526 15:12:29 Color wheel filter change from 0 to 0 15:12:29 FLIGetFilterPos err=0 currentPosition=0 15:12:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:29 Filter is already there-color wheel unchanged 15:12:29 Received message from Master: op=Shutter serial=146527 15:12:29 Shutter LASER close 15:12:29 Received message from Camera: op=State serial=146529 15:12:29 GetSingleValue result=40 Value=cccccccc 15:12:29 SkyScan query 15:12:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:12:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:30 Parameters OK 15:12:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:30 Set A/D data flow result=40 15:12:30 Set A/D channel type result=40 15:12:30 Set A/D encoding result=40 15:12:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:30 Set channel filter=0.000000e+000 result=40 15:12:30 Config A/D Result=40 15:12:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:30 Get A/D filter: -9.255963e+061 result=40 15:12:30 Get A/D value=-858993460 result=40 15:12:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:30 Parameters OK 15:12:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:30 Set A/D data flow result=40 15:12:30 Set A/D channel type result=40 15:12:30 Set A/D encoding result=40 15:12:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:30 Set channel filter=0.000000e+000 result=40 15:12:30 Config A/D Result=40 15:12:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:30 Get A/D filter: -9.255963e+061 result=40 15:12:30 Get A/D value=-858993460 result=40 15:12:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:30 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:30 Aux= 15:12:30 Message to Camera, serial 146529 queued 15:13:07 Received message from Master: op=PointingHead serial=146542 15:13:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:13:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:13:07 Point started: ret=0 15:13:07 point_skyscan result=0 15:13:08 Check angles 15:13:08 SkyScan query 15:13:09 SkyScan query done: ret=0 az=134.58<-8972 ze=36.33<-9578 Statuses=0009 0009 15:13:09 Msec=0 True Az=134.58 Ze=36.33 Az status=0009 Ze status=0009 15:13:09 Check angles 15:13:09 SkyScan query 15:13:09 SkyScan query done: ret=0 az=117.06<-7804 ze=15.435<-10971 Statuses=0009 0009 15:13:09 Msec=750 True Az=117.06 Ze=15.435 Az status=0009 Ze status=0009 15:13:09 Check angles 15:13:09 SkyScan query 15:13:10 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.58<-12372 Statuses=0009 0009 15:13:10 Msec=1500 True Az=99.795 Ze=-5.58 Az status=0009 Ze status=0009 15:13:10 Check angles 15:13:10 SkyScan query 15:13:11 SkyScan query done: ret=0 az=82.29<-5486 ze=-26.565<-13771 Statuses=0009 0009 15:13:11 Msec=2250 True Az=82.29 Ze=-26.565 Az status=0009 Ze status=0009 15:13:11 Check angles 15:13:11 SkyScan query 15:13:12 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.58<-14572 Statuses=0009 0008 15:13:12 Msec=3000 True Az=64.77 Ze=-38.58 Az status=0009 Ze status=0008 15:13:12 Check angles 15:13:12 SkyScan query 15:13:12 SkyScan query done: ret=0 az=47.325<-3155 ze=-38.52<-14568 Statuses=0009 0008 15:13:12 Msec=3750 True Az=47.325 Ze=-38.52 Az status=0009 Ze status=0008 15:13:12 Check angles 15:13:12 SkyScan query 15:13:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:13:13 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:13:13 Message to Master queued w/err=0: serial=146542 error=0 15:13:18 Received message from Master: op=Filter serial=146543 15:13:18 Color wheel filter change from 0 to 0 15:13:18 FLIGetFilterPos err=0 currentPosition=0 15:13:18 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:18 Filter is already there-color wheel unchanged 15:13:18 Received message from Master: op=Shutter serial=146544 15:13:18 Shutter LASER close 15:13:18 Received message from Camera: op=State serial=146546 15:13:18 GetSingleValue result=40 Value=cccccccc 15:13:18 SkyScan query 15:13:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:13:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:19 Parameters OK 15:13:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:19 Set A/D data flow result=40 15:13:19 Set A/D channel type result=40 15:13:19 Set A/D encoding result=40 15:13:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:19 Set channel filter=0.000000e+000 result=40 15:13:19 Config A/D Result=40 15:13:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:19 Get A/D filter: -9.255963e+061 result=40 15:13:19 Get A/D value=-858993460 result=40 15:13:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:19 Parameters OK 15:13:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:19 Set A/D data flow result=40 15:13:19 Set A/D channel type result=40 15:13:19 Set A/D encoding result=40 15:13:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:19 Set channel filter=0.000000e+000 result=40 15:13:19 Config A/D Result=40 15:13:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:19 Get A/D filter: -9.255963e+061 result=40 15:13:19 Get A/D value=-858993460 result=40 15:13:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:19 Aux= 15:13:19 Message to Camera, serial 146546 queued 15:13:56 Received message from Master: op=PointingHead serial=146559 15:13:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:13:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:13:56 Point started: ret=0 15:13:56 point_skyscan result=0 15:13:57 Check angles 15:13:57 SkyScan query 15:13:57 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.685<-16579 Statuses=0009 0009 15:13:57 Msec=0 True Az=64.29 Ze=-68.685 Az status=0009 Ze status=0009 15:13:58 Check angles 15:13:58 SkyScan query 15:13:58 SkyScan query done: ret=0 az=82.2<-5480 ze=-90.015<-18001 Statuses=0009 0009 15:13:58 Msec=750 True Az=82.2 Ze=-90.015 Az status=0009 Ze status=0009 15:13:58 Check angles 15:13:58 SkyScan query 15:13:59 SkyScan query done: ret=0 az=99.57<-6638 ze=-111.015<-19401 Statuses=0009 0009 15:13:59 Msec=1500 True Az=99.57 Ze=-111.015 Az status=0009 Ze status=0009 15:13:59 Check angles 15:13:59 SkyScan query 15:14:00 SkyScan query done: ret=0 az=117.06<-7804 ze=-131.94<-20796 Statuses=0009 0009 15:14:00 Msec=2250 True Az=117.06 Ze=-131.94 Az status=0009 Ze status=0009 15:14:00 Check angles 15:14:00 SkyScan query 15:14:00 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 15:14:00 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 15:14:01 Check angles 15:14:01 SkyScan query 15:14:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 15:14:01 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 15:14:01 Message to Master queued w/err=0: serial=146559 error=0 15:14:06 Received message from Master: op=Filter serial=146560 15:14:06 Color wheel filter change from 0 to 0 15:14:06 FLIGetFilterPos err=0 currentPosition=0 15:14:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:06 Filter is already there-color wheel unchanged 15:14:06 Received message from Master: op=Shutter serial=146561 15:14:06 Shutter LASER close 15:14:06 Received message from Camera: op=State serial=146563 15:14:06 GetSingleValue result=40 Value=cccccccc 15:14:06 SkyScan query 15:14:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:14:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:07 Parameters OK 15:14:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:07 Set A/D data flow result=40 15:14:07 Set A/D channel type result=40 15:14:07 Set A/D encoding result=40 15:14:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:07 Set channel filter=0.000000e+000 result=40 15:14:07 Config A/D Result=40 15:14:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:07 Get A/D filter: -9.255963e+061 result=40 15:14:07 Get A/D value=-858993460 result=40 15:14:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:07 Parameters OK 15:14:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:07 Set A/D data flow result=40 15:14:07 Set A/D channel type result=40 15:14:07 Set A/D encoding result=40 15:14:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:07 Set channel filter=0.000000e+000 result=40 15:14:07 Config A/D Result=40 15:14:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:07 Get A/D filter: -9.255963e+061 result=40 15:14:07 Get A/D value=-858993460 result=40 15:14:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:07 Aux= 15:14:07 Message to Camera, serial 146563 queued 15:14:44 Received message from Master: op=PointingHead serial=146576 15:14:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:14:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:14:44 Point started: ret=0 15:14:44 point_skyscan result=0 15:14:45 Check angles 15:14:45 SkyScan query 15:14:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0009 0009 15:14:45 Msec=0 True Az=112.995 Ze=-171.465 Az status=0009 Ze status=0009 15:14:46 Check angles 15:14:46 SkyScan query 15:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:14:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:14:46 Message to Master queued w/err=0: serial=146576 error=0 15:14:51 Received message from Master: op=Filter serial=146577 15:14:51 Color wheel filter change from 0 to 0 15:14:51 FLIGetFilterPos err=0 currentPosition=0 15:14:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:51 Filter is already there-color wheel unchanged 15:14:51 Received message from Master: op=Shutter serial=146578 15:14:51 Shutter LASER open 15:14:52 Received message from Camera: op=State serial=146580 15:14:52 GetSingleValue result=40 Value=cccccccc 15:14:52 SkyScan query 15:14:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:14:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:52 Parameters OK 15:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:52 Set A/D data flow result=40 15:14:52 Set A/D channel type result=40 15:14:52 Set A/D encoding result=40 15:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:52 Set channel filter=0.000000e+000 result=40 15:14:52 Config A/D Result=40 15:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:52 Get A/D filter: -9.255963e+061 result=40 15:14:52 Get A/D value=-858993460 result=40 15:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:52 Parameters OK 15:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:52 Set A/D data flow result=40 15:14:52 Set A/D channel type result=40 15:14:52 Set A/D encoding result=40 15:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:52 Set channel filter=0.000000e+000 result=40 15:14:52 Config A/D Result=40 15:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:52 Get A/D filter: -9.255963e+061 result=40 15:14:52 Get A/D value=-858993460 result=40 15:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:52 Aux= 15:14:52 Message to Camera, serial 146580 queued 15:15:01 Received message from Master: op=Shutter serial=146590 15:15:01 Shutter LASER close 15:15:01 Received message from Master: op=PointingHead serial=146594 15:15:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:15:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:15:02 Point started: ret=0 15:15:02 point_skyscan result=0 15:15:02 Check angles 15:15:02 SkyScan query 15:15:03 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.55<-21570 Statuses=0009 0009 15:15:03 Msec=0 True Az=135.81 Ze=-143.55 Az status=0009 Ze status=0009 15:15:03 Check angles 15:15:03 SkyScan query 15:15:04 SkyScan query done: ret=0 az=153.33<-10222 ze=-122.58<-20172 Statuses=0009 0009 15:15:04 Msec=750 True Az=153.33 Ze=-122.58 Az status=0009 Ze status=0009 15:15:04 Check angles 15:15:04 SkyScan query 15:15:04 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.7<-18780 Statuses=0009 0009 15:15:04 Msec=1500 True Az=170.79 Ze=-101.7 Az status=0009 Ze status=0009 15:15:05 Check angles 15:15:05 SkyScan query 15:15:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.67<-17378 Statuses=0008 0009 15:15:05 Msec=2250 True Az=176.01 Ze=-80.67 Az status=0008 Ze status=0009 15:15:05 Check angles 15:15:05 SkyScan query 15:15:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.745<-15983 Statuses=0008 0009 15:15:06 Msec=3000 True Az=175.995 Ze=-59.745 Az status=0008 Ze status=0009 15:15:06 Check angles 15:15:06 SkyScan query 15:15:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:15:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:15:07 Message to Master queued w/err=0: serial=146594 error=0 15:15:12 Received message from Master: op=Filter serial=146595 15:15:12 Color wheel filter change from 0 to 0 15:15:12 FLIGetFilterPos err=0 currentPosition=0 15:15:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:12 Filter is already there-color wheel unchanged 15:15:12 Received message from Master: op=Shutter serial=146596 15:15:12 Shutter LASER close 15:15:12 Received message from Camera: op=State serial=146598 15:15:12 GetSingleValue result=40 Value=cccccccc 15:15:12 SkyScan query 15:15:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:15:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:13 Parameters OK 15:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:13 Set A/D data flow result=40 15:15:13 Set A/D channel type result=40 15:15:13 Set A/D encoding result=40 15:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:13 Set channel filter=0.000000e+000 result=40 15:15:13 Config A/D Result=40 15:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:13 Get A/D filter: -9.255963e+061 result=40 15:15:13 Get A/D value=-858993460 result=40 15:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:13 Parameters OK 15:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:13 Set A/D data flow result=40 15:15:13 Set A/D channel type result=40 15:15:13 Set A/D encoding result=40 15:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:13 Set channel filter=0.000000e+000 result=40 15:15:13 Config A/D Result=40 15:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:13 Get A/D filter: -9.255963e+061 result=40 15:15:13 Get A/D value=-858993460 result=40 15:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:13 Aux= 15:15:13 Message to Camera, serial 146598 queued 15:15:27 Received message from Master: op=Identify serial=146599 15:15:48 Received message from Master: op=PointingHead serial=146613 15:15:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:15:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:15:49 Point started: ret=0 15:15:49 point_skyscan result=0 15:15:50 Check angles 15:15:50 SkyScan query 15:15:50 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.75<-13450 Statuses=0009 0009 15:15:50 Msec=0 True Az=152.97 Ze=-21.75 Az status=0009 Ze status=0009 [UTC 2018-12-14 15:15:50] 15:15:50 Check angles 15:15:50 SkyScan query 15:15:51 SkyScan query done: ret=0 az=133.875<-8925 ze=0.945<-11937 Statuses=0009 0009 15:15:51 Msec=750 True Az=133.875 Ze=0.945 Az status=0009 Ze status=0009 15:15:51 Check angles 15:15:51 SkyScan query 15:15:52 SkyScan query done: ret=0 az=117.6<-7840 ze=20.655<-10623 Statuses=0009 0009 15:15:52 Msec=1500 True Az=117.6 Ze=20.655 Az status=0009 Ze status=0009 15:15:52 Check angles 15:15:52 SkyScan query 15:15:52 SkyScan query done: ret=0 az=100.23<-6682 ze=41.595<-9227 Statuses=0009 0009 15:15:52 Msec=2250 True Az=100.23 Ze=41.595 Az status=0009 Ze status=0009 [UTC 2018-12-14 15:15:52] 15:15:53 Check angles 15:15:53 SkyScan query 15:15:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:15:53 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:15:53 Check angles 15:15:53 SkyScan query 15:15:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:15:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:15:54 Message to Master queued w/err=0: serial=146613 error=0 15:15:59 Received message from Master: op=Filter serial=146614 15:15:59 Color wheel filter change from 0 to 0 15:15:59 FLIGetFilterPos err=0 currentPosition=0 15:15:59 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:59 Filter is already there-color wheel unchanged 15:15:59 Received message from Master: op=Shutter serial=146615 15:15:59 Shutter LASER close 15:15:59 Received message from Camera: op=State serial=146617 15:15:59 GetSingleValue result=40 Value=cccccccc 15:15:59 SkyScan query 15:16:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:16:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:00 Parameters OK 15:16:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:00 Set A/D data flow result=40 15:16:00 Set A/D channel type result=40 15:16:00 Set A/D encoding result=40 15:16:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:00 Set channel filter=0.000000e+000 result=40 15:16:00 Config A/D Result=40 15:16:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:00 Get A/D filter: -9.255963e+061 result=40 15:16:00 Get A/D value=-858993460 result=40 15:16:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:00 Parameters OK 15:16:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:00 Set A/D data flow result=40 15:16:00 Set A/D channel type result=40 15:16:00 Set A/D encoding result=40 15:16:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:00 Set channel filter=0.000000e+000 result=40 15:16:00 Config A/D Result=40 15:16:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:00 Get A/D filter: -9.255963e+061 result=40 15:16:00 Get A/D value=-858993460 result=40 15:16:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:00 Aux= 15:16:00 Message to Camera, serial 146617 queued 15:16:36 Received message from Master: op=PointingHead serial=146630 15:16:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:16:36 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:16:37 Point started: ret=0 15:16:37 point_skyscan result=0 15:16:38 Check angles 15:16:38 SkyScan query 15:16:38 SkyScan query done: ret=0 az=109.32<-7288 ze=38.49<-9434 Statuses=0009 0008 15:16:38 Msec=0 True Az=109.32 Ze=38.49 Az status=0009 Ze status=0008 15:16:38 Check angles 15:16:38 SkyScan query 15:16:39 SkyScan query done: ret=0 az=126.645<-8443 ze=38.505<-9433 Statuses=0009 0008 15:16:39 Msec=750 True Az=126.645 Ze=38.505 Az status=0009 Ze status=0008 15:16:39 Check angles 15:16:39 SkyScan query 15:16:40 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 15:16:40 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 15:16:40 Check angles 15:16:40 SkyScan query 15:16:40 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 15:16:40 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 15:16:41 Check angles 15:16:41 SkyScan query 15:16:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:16:41 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:16:41 Check angles 15:16:41 SkyScan query 15:16:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:16:42 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:16:42 Message to Master queued w/err=0: serial=146630 error=0 15:16:47 Received message from Master: op=Filter serial=146631 15:16:47 Color wheel filter change from 0 to 0 15:16:47 FLIGetFilterPos err=0 currentPosition=0 15:16:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:47 Filter is already there-color wheel unchanged 15:16:47 Received message from Master: op=Shutter serial=146632 15:16:47 Shutter LASER close 15:16:47 Received message from Camera: op=State serial=146634 15:16:47 GetSingleValue result=40 Value=cccccccc 15:16:47 SkyScan query 15:16:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:16:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:48 Parameters OK 15:16:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:48 Set A/D data flow result=40 15:16:48 Set A/D channel type result=40 15:16:48 Set A/D encoding result=40 15:16:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:48 Set channel filter=0.000000e+000 result=40 15:16:48 Config A/D Result=40 15:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:48 Get A/D filter: -9.255963e+061 result=40 15:16:48 Get A/D value=-858993460 result=40 15:16:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:48 Parameters OK 15:16:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:48 Set A/D data flow result=40 15:16:48 Set A/D channel type result=40 15:16:48 Set A/D encoding result=40 15:16:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:48 Set channel filter=0.000000e+000 result=40 15:16:48 Config A/D Result=40 15:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:48 Get A/D filter: -9.255963e+061 result=40 15:16:48 Get A/D value=-858993460 result=40 15:16:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:48 Aux= 15:16:48 Message to Camera, serial 146634 queued 15:17:25 Received message from Master: op=PointingHead serial=146647 15:17:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:17:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:17:25 Point started: ret=0 15:17:25 point_skyscan result=0 15:17:26 Check angles 15:17:26 SkyScan query 15:17:26 SkyScan query done: ret=0 az=152.91<-10194 ze=8.535<-11431 Statuses=0009 0009 15:17:26 Msec=0 True Az=152.91 Ze=8.535 Az status=0009 Ze status=0009 15:17:26 Check angles 15:17:26 SkyScan query 15:17:27 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.39<-12826 Statuses=0009 0009 15:17:27 Msec=750 True Az=135.405 Ze=-12.39 Az status=0009 Ze status=0009 15:17:27 Check angles 15:17:27 SkyScan query 15:17:28 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.345<-14223 Statuses=0009 0009 15:17:28 Msec=1500 True Az=117.81 Ze=-33.345 Az status=0009 Ze status=0009 15:17:28 Check angles 15:17:28 SkyScan query 15:17:29 SkyScan query done: ret=0 az=100.47<-6698 ze=-51.555<-15437 Statuses=0009 0009 15:17:29 Msec=2250 True Az=100.47 Ze=-51.555 Az status=0009 Ze status=0009 15:17:29 Check angles 15:17:29 SkyScan query 15:17:29 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:17:29 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:17:29 Check angles 15:17:29 SkyScan query 15:17:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:17:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:17:30 Message to Master queued w/err=0: serial=146647 error=0 15:17:35 Received message from Master: op=Filter serial=146648 15:17:35 Color wheel filter change from 0 to 0 15:17:35 FLIGetFilterPos err=0 currentPosition=0 15:17:35 FLIGetStepsRemaining err=0 RemainingSteps=0 15:17:35 Filter is already there-color wheel unchanged 15:17:35 Received message from Master: op=Shutter serial=146649 15:17:35 Shutter LASER close 15:17:35 Received message from Camera: op=State serial=146651 15:17:35 GetSingleValue result=40 Value=cccccccc 15:17:35 SkyScan query 15:17:36 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 15:17:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:36 Parameters OK 15:17:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:36 Set A/D data flow result=40 15:17:36 Set A/D channel type result=40 15:17:36 Set A/D encoding result=40 15:17:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:36 Set channel filter=0.000000e+000 result=40 15:17:36 Config A/D Result=40 15:17:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:36 Get A/D filter: -9.255963e+061 result=40 15:17:36 Get A/D value=-858993460 result=40 15:17:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:36 Parameters OK 15:17:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:36 Set A/D data flow result=40 15:17:36 Set A/D channel type result=40 15:17:36 Set A/D encoding result=40 15:17:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:36 Set channel filter=0.000000e+000 result=40 15:17:36 Config A/D Result=40 15:17:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:36 Get A/D filter: -9.255963e+061 result=40 15:17:36 Get A/D value=-858993460 result=40 15:17:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:36 PH type=1 Digital in=000000 Instrument Az=85.980003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:17:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:17:36 Aux= 15:17:36 Message to Camera, serial 146651 queued 15:18:13 Received message from Master: op=PointingHead serial=146664 15:18:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:18:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:18:13 Point started: ret=0 15:18:13 point_skyscan result=0 15:18:14 Check angles 15:18:14 SkyScan query 15:18:14 SkyScan query done: ret=0 az=109.32<-7288 ze=-81.705<-17447 Statuses=0009 0009 15:18:14 Msec=0 True Az=109.32 Ze=-81.705 Az status=0009 Ze status=0009 15:18:15 Check angles 15:18:15 SkyScan query 15:18:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 15:18:15 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 15:18:15 Check angles 15:18:15 SkyScan query 15:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.99<-20266 Statuses=0008 0009 15:18:16 Msec=1500 True Az=112.995 Ze=-123.99 Az status=0008 Ze status=0009 15:18:16 Check angles 15:18:16 SkyScan query 15:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.915<-21661 Statuses=0008 0009 15:18:17 Msec=2250 True Az=112.995 Ze=-144.915 Az status=0008 Ze status=0009 15:18:17 Check angles 15:18:17 SkyScan query 15:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.855<-23057 Statuses=0008 0009 15:18:17 Msec=3000 True Az=112.995 Ze=-165.855 Az status=0008 Ze status=0009 15:18:18 Check angles 15:18:18 SkyScan query 15:18:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 15:18:18 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 15:18:18 Message to Master queued w/err=0: serial=146664 error=0 15:18:23 Received message from Master: op=Filter serial=146665 15:18:23 Color wheel filter change from 0 to 0 15:18:23 FLIGetFilterPos err=0 currentPosition=0 15:18:23 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:23 Filter is already there-color wheel unchanged 15:18:23 Received message from Master: op=Shutter serial=146666 15:18:23 Shutter LASER open 15:18:23 Received message from Camera: op=State serial=146668 15:18:23 GetSingleValue result=40 Value=cccccccc 15:18:23 SkyScan query 15:18:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:18:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:24 Parameters OK 15:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:24 Set A/D data flow result=40 15:18:24 Set A/D channel type result=40 15:18:24 Set A/D encoding result=40 15:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:24 Set channel filter=0.000000e+000 result=40 15:18:24 Config A/D Result=40 15:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:24 Get A/D filter: -9.255963e+061 result=40 15:18:24 Get A/D value=-858993460 result=40 15:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:24 Parameters OK 15:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:24 Set A/D data flow result=40 15:18:24 Set A/D channel type result=40 15:18:24 Set A/D encoding result=40 15:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:24 Set channel filter=0.000000e+000 result=40 15:18:24 Config A/D Result=40 15:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:24 Get A/D filter: -9.255963e+061 result=40 15:18:24 Get A/D value=-858993460 result=40 15:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:24 Aux= 15:18:24 Message to Camera, serial 146668 queued 15:18:32 Received message from Master: op=Shutter serial=146678 15:18:32 Shutter LASER close 15:18:33 Received message from Master: op=PointingHead serial=146682 15:18:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:18:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:18:33 Point started: ret=0 15:18:33 point_skyscan result=0 15:18:34 Check angles 15:18:34 SkyScan query 15:18:35 SkyScan query done: ret=0 az=90.135<-6009 ze=157.47<-1502 Statuses=0009 0009 15:18:35 Msec=0 True Az=90.135 Ze=157.47 Az status=0009 Ze status=0009 15:18:35 Check angles 15:18:35 SkyScan query 15:18:35 SkyScan query done: ret=0 az=72.645<-4843 ze=136.47<-2902 Statuses=0009 0009 15:18:35 Msec=750 True Az=72.645 Ze=136.47 Az status=0009 Ze status=0009 15:18:35 Check angles 15:18:35 SkyScan query 15:18:36 SkyScan query done: ret=0 az=55.245<-3683 ze=115.56<-4296 Statuses=0009 0009 15:18:36 Msec=1500 True Az=55.245 Ze=115.56 Az status=0009 Ze status=0009 15:18:36 Check angles 15:18:36 SkyScan query 15:18:37 SkyScan query done: ret=0 az=41.025<-2735 ze=94.56<-5696 Statuses=0009 0009 15:18:37 Msec=2250 True Az=41.025 Ze=94.56 Az status=0009 Ze status=0009 15:18:37 Check angles 15:18:37 SkyScan query 15:18:38 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 15:18:38 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 15:18:38 Check angles 15:18:38 SkyScan query 15:18:38 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 15:18:38 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 15:18:38 Check angles 15:18:38 SkyScan query 15:18:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:18:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:18:39 Message to Master queued w/err=0: serial=146682 error=0 15:18:44 Received message from Master: op=Filter serial=146683 15:18:44 Color wheel filter change from 0 to 0 15:18:44 FLIGetFilterPos err=0 currentPosition=0 15:18:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:44 Filter is already there-color wheel unchanged 15:18:44 Received message from Master: op=Shutter serial=146684 15:18:44 Shutter LASER close 15:18:44 Received message from Camera: op=State serial=146686 15:18:44 GetSingleValue result=40 Value=cccccccc 15:18:44 SkyScan query 15:18:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:18:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:45 Parameters OK 15:18:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:45 Set A/D data flow result=40 15:18:45 Set A/D channel type result=40 15:18:45 Set A/D encoding result=40 15:18:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:45 Set channel filter=0.000000e+000 result=40 15:18:45 Config A/D Result=40 15:18:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:45 Get A/D filter: -9.255963e+061 result=40 15:18:45 Get A/D value=-858993460 result=40 15:18:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:45 Parameters OK 15:18:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:45 Set A/D data flow result=40 15:18:45 Set A/D channel type result=40 15:18:45 Set A/D encoding result=40 15:18:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:45 Set channel filter=0.000000e+000 result=40 15:18:45 Config A/D Result=40 15:18:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:45 Get A/D filter: -9.255963e+061 result=40 15:18:45 Get A/D value=-858993460 result=40 15:18:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:45 Aux= 15:18:45 Message to Camera, serial 146686 queued 15:19:22 Received message from Master: op=PointingHead serial=146699 15:19:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:19:22 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:19:22 Point started: ret=0 15:19:22 point_skyscan result=0 15:19:23 Check angles 15:19:23 SkyScan query 15:19:24 SkyScan query done: ret=0 az=63.945<-4263 ze=66.54<-7564 Statuses=0009 0008 15:19:24 Msec=0 True Az=63.945 Ze=66.54 Az status=0009 Ze status=0008 15:19:24 Check angles 15:19:24 SkyScan query 15:19:24 SkyScan query done: ret=0 az=81.435<-5429 ze=66.51<-7566 Statuses=0009 0008 15:19:24 Msec=750 True Az=81.435 Ze=66.51 Az status=0009 Ze status=0008 15:19:24 Check angles 15:19:24 SkyScan query 15:19:25 SkyScan query done: ret=0 az=98.88<-6592 ze=66.495<-7567 Statuses=0009 0008 15:19:25 Msec=1500 True Az=98.88 Ze=66.495 Az status=0009 Ze status=0008 15:19:25 Check angles 15:19:25 SkyScan query 15:19:26 SkyScan query done: ret=0 az=116.415<-7761 ze=66.495<-7567 Statuses=0009 0008 15:19:26 Msec=2250 True Az=116.415 Ze=66.495 Az status=0009 Ze status=0008 15:19:26 Check angles 15:19:26 SkyScan query 15:19:27 SkyScan query done: ret=0 az=133.875<-8925 ze=66.495<-7567 Statuses=0009 0008 15:19:27 Msec=3000 True Az=133.875 Ze=66.495 Az status=0009 Ze status=0008 15:19:27 Check angles 15:19:27 SkyScan query 15:19:27 SkyScan query done: ret=0 az=151.26<-10084 ze=66.495<-7567 Statuses=0009 0008 15:19:27 Msec=3750 True Az=151.26 Ze=66.495 Az status=0009 Ze status=0008 15:19:27 Check angles 15:19:27 SkyScan query 15:19:28 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:19:28 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:19:28 Message to Master queued w/err=0: serial=146699 error=0 15:19:33 Received message from Master: op=Filter serial=146700 15:19:33 Color wheel filter change from 0 to 0 15:19:33 FLIGetFilterPos err=0 currentPosition=0 15:19:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:19:33 Filter is already there-color wheel unchanged 15:19:33 Received message from Master: op=Shutter serial=146701 15:19:33 Shutter LASER close 15:19:33 Received message from Camera: op=State serial=146703 15:19:33 GetSingleValue result=40 Value=cccccccc 15:19:33 SkyScan query 15:19:34 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:19:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:34 Parameters OK 15:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:34 Set A/D data flow result=40 15:19:34 Set A/D channel type result=40 15:19:34 Set A/D encoding result=40 15:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:34 Set channel filter=0.000000e+000 result=40 15:19:34 Config A/D Result=40 15:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:34 Get A/D filter: -9.255963e+061 result=40 15:19:34 Get A/D value=-858993460 result=40 15:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:34 Parameters OK 15:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:34 Set A/D data flow result=40 15:19:34 Set A/D channel type result=40 15:19:34 Set A/D encoding result=40 15:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:34 Set channel filter=0.000000e+000 result=40 15:19:34 Config A/D Result=40 15:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:34 Get A/D filter: -9.255963e+061 result=40 15:19:34 Get A/D value=-858993460 result=40 15:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:34 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:19:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:19:34 Aux= 15:19:34 Message to Camera, serial 146703 queued 15:20:11 Received message from Master: op=PointingHead serial=146716 15:20:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:20:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:20:11 Point started: ret=0 15:20:11 point_skyscan result=0 15:20:12 Check angles 15:20:12 SkyScan query 15:20:12 SkyScan query done: ret=0 az=135.075<-9005 ze=36.885<-9541 Statuses=0009 0009 15:20:12 Msec=0 True Az=135.075 Ze=36.885 Az status=0009 Ze status=0009 15:20:12 Check angles 15:20:12 SkyScan query 15:20:13 SkyScan query done: ret=0 az=117.555<-7837 ze=15.945<-10937 Statuses=0009 0009 15:20:13 Msec=750 True Az=117.555 Ze=15.945 Az status=0009 Ze status=0009 15:20:13 Check angles 15:20:13 SkyScan query 15:20:14 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.475<-12365 Statuses=0009 0009 15:20:14 Msec=1500 True Az=99.825 Ze=-5.475 Az status=0009 Ze status=0009 15:20:14 Check angles 15:20:14 SkyScan query 15:20:15 SkyScan query done: ret=0 az=82.35<-5490 ze=-26.43<-13762 Statuses=0009 0009 15:20:15 Msec=2250 True Az=82.35 Ze=-26.43 Az status=0009 Ze status=0009 15:20:15 Check angles 15:20:15 SkyScan query 15:20:15 SkyScan query done: ret=0 az=64.755<-4317 ze=-38.595<-14573 Statuses=0009 0008 15:20:15 Msec=3000 True Az=64.755 Ze=-38.595 Az status=0009 Ze status=0008 15:20:16 Check angles 15:20:16 SkyScan query 15:20:16 SkyScan query done: ret=0 az=47.04<-3136 ze=-38.52<-14568 Statuses=0009 0008 15:20:16 Msec=3750 True Az=47.04 Ze=-38.52 Az status=0009 Ze status=0008 15:20:16 Check angles 15:20:16 SkyScan query 15:20:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:20:17 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:20:17 Message to Master queued w/err=0: serial=146716 error=0 15:20:22 Received message from Master: op=Filter serial=146717 15:20:22 Color wheel filter change from 0 to 0 15:20:22 FLIGetFilterPos err=0 currentPosition=0 15:20:22 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:22 Filter is already there-color wheel unchanged 15:20:22 Received message from Master: op=Shutter serial=146718 15:20:22 Shutter LASER close 15:20:22 Received message from Camera: op=State serial=146720 15:20:22 GetSingleValue result=40 Value=cccccccc 15:20:22 SkyScan query 15:20:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:20:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:23 Parameters OK 15:20:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:23 Set A/D data flow result=40 15:20:23 Set A/D channel type result=40 15:20:23 Set A/D encoding result=40 15:20:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:23 Set channel filter=0.000000e+000 result=40 15:20:23 Config A/D Result=40 15:20:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:23 Get A/D filter: -9.255963e+061 result=40 15:20:23 Get A/D value=-858993460 result=40 15:20:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:23 Parameters OK 15:20:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:23 Set A/D data flow result=40 15:20:23 Set A/D channel type result=40 15:20:23 Set A/D encoding result=40 15:20:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:23 Set channel filter=0.000000e+000 result=40 15:20:23 Config A/D Result=40 15:20:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:23 Get A/D filter: -9.255963e+061 result=40 15:20:23 Get A/D value=-858993460 result=40 15:20:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:23 Aux= 15:20:23 Message to Camera, serial 146720 queued 15:20:59 Received message from Master: op=PointingHead serial=146732 15:20:59 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:20:59 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:20:59 Point started: ret=0 15:20:59 point_skyscan result=0 15:21:00 Check angles 15:21:00 SkyScan query 15:21:00 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.295<-16553 Statuses=0009 0009 15:21:00 Msec=0 True Az=63.96 Ze=-68.295 Az status=0009 Ze status=0009 15:21:00 Check angles 15:21:00 SkyScan query 15:21:01 SkyScan query done: ret=0 az=81.51<-5434 ze=-89.25<-17950 Statuses=0009 0009 15:21:01 Msec=750 True Az=81.51 Ze=-89.25 Az status=0009 Ze status=0009 15:21:01 Check angles 15:21:01 SkyScan query 15:21:02 SkyScan query done: ret=0 az=98.925<-6595 ze=-110.175<-19345 Statuses=0009 0009 15:21:02 Msec=1500 True Az=98.925 Ze=-110.175 Az status=0009 Ze status=0009 15:21:02 Check angles 15:21:02 SkyScan query 15:21:03 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.55<-20770 Statuses=0009 0009 15:21:03 Msec=2250 True Az=116.745 Ze=-131.55 Az status=0009 Ze status=0009 15:21:03 Check angles 15:21:03 SkyScan query 15:21:03 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.57<-21438 Statuses=0009 0008 15:21:03 Msec=3000 True Az=131.01 Ze=-141.57 Az status=0009 Ze status=0008 15:21:03 Check angles 15:21:03 SkyScan query 15:21:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 15:21:04 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 15:21:04 Message to Master queued w/err=0: serial=146732 error=0 15:21:09 Received message from Master: op=Filter serial=146733 15:21:09 Color wheel filter change from 0 to 0 15:21:09 FLIGetFilterPos err=0 currentPosition=0 15:21:09 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:09 Filter is already there-color wheel unchanged 15:21:09 Received message from Master: op=Shutter serial=146734 15:21:09 Shutter LASER close 15:21:09 Received message from Camera: op=State serial=146736 15:21:09 GetSingleValue result=40 Value=cccccccc 15:21:09 SkyScan query 15:21:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:21:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:10 Parameters OK 15:21:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:10 Set A/D data flow result=40 15:21:10 Set A/D channel type result=40 15:21:10 Set A/D encoding result=40 15:21:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:10 Set channel filter=0.000000e+000 result=40 15:21:10 Config A/D Result=40 15:21:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:10 Get A/D filter: -9.255963e+061 result=40 15:21:10 Get A/D value=-858993460 result=40 15:21:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:10 Parameters OK 15:21:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:10 Set A/D data flow result=40 15:21:10 Set A/D channel type result=40 15:21:10 Set A/D encoding result=40 15:21:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:10 Set channel filter=0.000000e+000 result=40 15:21:10 Config A/D Result=40 15:21:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:10 Get A/D filter: -9.255963e+061 result=40 15:21:10 Get A/D value=-858993460 result=40 15:21:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:10 Aux= 15:21:10 Message to Camera, serial 146736 queued 15:21:47 Received message from Master: op=PointingHead serial=146749 15:21:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:21:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:21:47 Point started: ret=0 15:21:47 point_skyscan result=0 15:21:48 Check angles 15:21:48 SkyScan query 15:21:48 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 15:21:48 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 15:21:49 Check angles 15:21:49 SkyScan query 15:21:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:21:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:21:49 Message to Master queued w/err=0: serial=146749 error=0 15:21:54 Received message from Master: op=Filter serial=146750 15:21:54 Color wheel filter change from 0 to 0 15:21:54 FLIGetFilterPos err=0 currentPosition=0 15:21:54 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:54 Filter is already there-color wheel unchanged 15:21:54 Received message from Master: op=Shutter serial=146751 15:21:54 Shutter LASER open 15:21:54 Received message from Camera: op=State serial=146753 15:21:54 GetSingleValue result=40 Value=cccccccc 15:21:54 SkyScan query 15:21:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:21:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:55 Parameters OK 15:21:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:55 Set A/D data flow result=40 15:21:55 Set A/D channel type result=40 15:21:55 Set A/D encoding result=40 15:21:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:55 Set channel filter=0.000000e+000 result=40 15:21:55 Config A/D Result=40 15:21:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:55 Get A/D filter: -9.255963e+061 result=40 15:21:55 Get A/D value=-858993460 result=40 15:21:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:55 Parameters OK 15:21:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:55 Set A/D data flow result=40 15:21:55 Set A/D channel type result=40 15:21:55 Set A/D encoding result=40 15:21:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:55 Set channel filter=0.000000e+000 result=40 15:21:55 Config A/D Result=40 15:21:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:55 Get A/D filter: -9.255963e+061 result=40 15:21:55 Get A/D value=-858993460 result=40 15:21:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:55 Aux= 15:21:55 Message to Camera, serial 146753 queued 15:22:03 Received message from Master: op=Shutter serial=146763 15:22:03 Shutter LASER close 15:22:04 Received message from Master: op=PointingHead serial=146767 15:22:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:22:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:22:04 Point started: ret=0 15:22:04 point_skyscan result=0 15:22:05 Check angles 15:22:05 SkyScan query 15:22:06 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.95<-21530 Statuses=0009 0009 15:22:06 Msec=0 True Az=136.215 Ze=-142.95 Az status=0009 Ze status=0009 15:22:06 Check angles 15:22:06 SkyScan query 15:22:06 SkyScan query done: ret=0 az=154.185<-10279 ze=-121.56<-20104 Statuses=0009 0009 15:22:06 Msec=750 True Az=154.185 Ze=-121.56 Az status=0009 Ze status=0009 15:22:07 Check angles 15:22:07 SkyScan query 15:22:07 SkyScan query done: ret=0 az=171.615<-11441 ze=-100.485<-18699 Statuses=0009 0009 15:22:07 Msec=1500 True Az=171.615 Ze=-100.485 Az status=0009 Ze status=0009 15:22:07 Check angles 15:22:07 SkyScan query 15:22:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.605<-17307 Statuses=0008 0009 15:22:08 Msec=2250 True Az=176.01 Ze=-79.605 Az status=0008 Ze status=0009 15:22:08 Check angles 15:22:08 SkyScan query 15:22:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.2<-15880 Statuses=0008 0009 15:22:09 Msec=3000 True Az=176.01 Ze=-58.2 Az status=0008 Ze status=0009 15:22:09 Check angles 15:22:09 SkyScan query 15:22:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:22:09 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:22:09 Message to Master queued w/err=0: serial=146767 error=0 15:22:14 Received message from Master: op=Filter serial=146768 15:22:14 Color wheel filter change from 0 to 0 15:22:14 FLIGetFilterPos err=0 currentPosition=0 15:22:14 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:14 Filter is already there-color wheel unchanged 15:22:15 Received message from Master: op=Shutter serial=146769 15:22:15 Shutter LASER close 15:22:15 Received message from Camera: op=State serial=146771 15:22:15 GetSingleValue result=40 Value=cccccccc 15:22:15 SkyScan query 15:22:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:22:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:15 Parameters OK 15:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:15 Set A/D data flow result=40 15:22:15 Set A/D channel type result=40 15:22:15 Set A/D encoding result=40 15:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:15 Set channel filter=0.000000e+000 result=40 15:22:15 Config A/D Result=40 15:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:15 Get A/D filter: -9.255963e+061 result=40 15:22:15 Get A/D value=-858993460 result=40 15:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:15 Parameters OK 15:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:15 Set A/D data flow result=40 15:22:15 Set A/D channel type result=40 15:22:15 Set A/D encoding result=40 15:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:15 Set channel filter=0.000000e+000 result=40 15:22:15 Config A/D Result=40 15:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:15 Get A/D filter: -9.255963e+061 result=40 15:22:15 Get A/D value=-858993460 result=40 15:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:15 Aux= 15:22:15 Message to Camera, serial 146771 queued 15:22:51 Received message from Master: op=PointingHead serial=146783 15:22:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:22:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:22:52 Point started: ret=0 15:22:52 point_skyscan result=0 15:22:52 Check angles 15:22:52 SkyScan query 15:22:53 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.405<-13427 Statuses=0009 0009 15:22:53 Msec=0 True Az=152.655 Ze=-21.405 Az status=0009 Ze status=0009 15:22:53 Check angles 15:22:53 SkyScan query 15:22:54 SkyScan query done: ret=0 az=134.58<-8972 ze=-0.015<-12001 Statuses=0009 0009 15:22:54 Msec=750 True Az=134.58 Ze=-0.015 Az status=0009 Ze status=0009 15:22:54 Check angles 15:22:54 SkyScan query 15:22:54 SkyScan query done: ret=0 az=117.255<-7817 ze=21<-10600 Statuses=0009 0009 15:22:54 Msec=1500 True Az=117.255 Ze=21 Az status=0009 Ze status=0009 15:22:55 Check angles 15:22:55 SkyScan query 15:22:55 SkyScan query done: ret=0 az=99.84<-6656 ze=41.88<-9208 Statuses=0009 0009 15:22:55 Msec=2250 True Az=99.84 Ze=41.88 Az status=0009 Ze status=0009 15:22:55 Check angles 15:22:55 SkyScan query 15:22:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 15:22:56 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 15:22:56 Check angles 15:22:56 SkyScan query 15:22:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:22:57 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 15:22:57 Message to Master queued w/err=0: serial=146783 error=0 15:23:02 Received message from Master: op=Filter serial=146784 15:23:02 Color wheel filter change from 0 to 0 15:23:02 FLIGetFilterPos err=0 currentPosition=0 15:23:02 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:02 Filter is already there-color wheel unchanged 15:23:02 Received message from Master: op=Shutter serial=146785 15:23:02 Shutter LASER close 15:23:02 Received message from Camera: op=State serial=146787 15:23:02 GetSingleValue result=40 Value=cccccccc 15:23:02 SkyScan query 15:23:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:23:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:03 Parameters OK 15:23:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:03 Set A/D data flow result=40 15:23:03 Set A/D channel type result=40 15:23:03 Set A/D encoding result=40 15:23:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:03 Set channel filter=0.000000e+000 result=40 15:23:03 Config A/D Result=40 15:23:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:03 Get A/D filter: -9.255963e+061 result=40 15:23:03 Get A/D value=-858993460 result=40 15:23:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:03 Parameters OK 15:23:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:03 Set A/D data flow result=40 15:23:03 Set A/D channel type result=40 15:23:03 Set A/D encoding result=40 15:23:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:03 Set channel filter=0.000000e+000 result=40 15:23:03 Config A/D Result=40 15:23:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:03 Get A/D filter: -9.255963e+061 result=40 15:23:03 Get A/D value=-858993460 result=40 15:23:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:03 Aux= 15:23:03 Message to Camera, serial 146787 queued 15:23:39 Received message from Master: op=PointingHead serial=146800 15:23:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:23:39 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:23:40 Point started: ret=0 15:23:40 point_skyscan result=0 15:23:40 Check angles 15:23:40 SkyScan query 15:23:41 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 15:23:41 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 15:23:41 Check angles 15:23:41 SkyScan query 15:23:42 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 15:23:42 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 15:23:42 Check angles 15:23:42 SkyScan query 15:23:43 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 15:23:43 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 15:23:43 Check angles 15:23:43 SkyScan query 15:23:43 SkyScan query done: ret=0 az=161.265<-10751 ze=38.505<-9433 Statuses=0009 0008 15:23:43 Msec=2250 True Az=161.265 Ze=38.505 Az status=0009 Ze status=0008 15:23:43 Check angles 15:23:43 SkyScan query 15:23:44 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:23:44 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:23:44 Check angles 15:23:44 SkyScan query 15:23:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:23:45 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:23:45 Message to Master queued w/err=0: serial=146800 error=0 15:23:50 Received message from Master: op=Filter serial=146801 15:23:50 Color wheel filter change from 0 to 0 15:23:50 FLIGetFilterPos err=0 currentPosition=0 15:23:50 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:50 Filter is already there-color wheel unchanged 15:23:50 Received message from Master: op=Shutter serial=146802 15:23:50 Shutter LASER close 15:23:50 Received message from Camera: op=State serial=146804 15:23:50 GetSingleValue result=40 Value=cccccccc 15:23:50 SkyScan query 15:23:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:23:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:51 Parameters OK 15:23:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:51 Set A/D data flow result=40 15:23:51 Set A/D channel type result=40 15:23:51 Set A/D encoding result=40 15:23:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:51 Set channel filter=0.000000e+000 result=40 15:23:51 Config A/D Result=40 15:23:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:51 Get A/D filter: -9.255963e+061 result=40 15:23:51 Get A/D value=-858993460 result=40 15:23:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:51 Parameters OK 15:23:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:51 Set A/D data flow result=40 15:23:51 Set A/D channel type result=40 15:23:51 Set A/D encoding result=40 15:23:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:51 Set channel filter=0.000000e+000 result=40 15:23:51 Config A/D Result=40 15:23:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:51 Get A/D filter: -9.255963e+061 result=40 15:23:51 Get A/D value=-858993460 result=40 15:23:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:51 Aux= 15:23:51 Message to Camera, serial 146804 queued 15:24:27 Received message from Master: op=PointingHead serial=146817 15:24:27 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:24:27 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:24:28 Point started: ret=0 15:24:28 point_skyscan result=0 15:24:29 Check angles 15:24:29 SkyScan query 15:24:29 SkyScan query done: ret=0 az=152.76<-10184 ze=8.43<-11438 Statuses=0009 0009 15:24:29 Msec=0 True Az=152.76 Ze=8.43 Az status=0009 Ze status=0009 15:24:29 Check angles 15:24:29 SkyScan query 15:24:30 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.48<-12832 Statuses=0009 0009 15:24:30 Msec=750 True Az=135.39 Ze=-12.48 Az status=0009 Ze status=0009 15:24:30 Check angles 15:24:30 SkyScan query 15:24:31 SkyScan query done: ret=0 az=117.51<-7834 ze=-33.945<-14263 Statuses=0009 0009 15:24:31 Msec=1500 True Az=117.51 Ze=-33.945 Az status=0009 Ze status=0009 15:24:31 Check angles 15:24:31 SkyScan query 15:24:31 SkyScan query done: ret=0 az=100.065<-6671 ze=-51.57<-15438 Statuses=0009 0009 15:24:31 Msec=2250 True Az=100.065 Ze=-51.57 Az status=0009 Ze status=0009 15:24:32 Check angles 15:24:32 SkyScan query 15:24:32 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 15:24:32 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 15:24:32 Check angles 15:24:32 SkyScan query 15:24:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:24:33 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:24:33 Message to Master queued w/err=0: serial=146817 error=0 15:24:38 Received message from Master: op=Filter serial=146818 15:24:38 Color wheel filter change from 0 to 0 15:24:38 FLIGetFilterPos err=0 currentPosition=0 15:24:38 FLIGetStepsRemaining err=0 RemainingSteps=0 15:24:38 Filter is already there-color wheel unchanged 15:24:38 Received message from Master: op=Shutter serial=146819 15:24:38 Shutter LASER close 15:24:38 Received message from Camera: op=State serial=146821 15:24:38 GetSingleValue result=40 Value=cccccccc 15:24:38 SkyScan query 15:24:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:24:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:39 Parameters OK 15:24:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:39 Set A/D data flow result=40 15:24:39 Set A/D channel type result=40 15:24:39 Set A/D encoding result=40 15:24:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:39 Set channel filter=0.000000e+000 result=40 15:24:39 Config A/D Result=40 15:24:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:39 Get A/D filter: -9.255963e+061 result=40 15:24:39 Get A/D value=-858993460 result=40 15:24:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:39 Parameters OK 15:24:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:39 Set A/D data flow result=40 15:24:39 Set A/D channel type result=40 15:24:39 Set A/D encoding result=40 15:24:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:39 Set channel filter=0.000000e+000 result=40 15:24:39 Config A/D Result=40 15:24:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:39 Get A/D filter: -9.255963e+061 result=40 15:24:39 Get A/D value=-858993460 result=40 15:24:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:24:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:24:39 Aux= 15:24:39 Message to Camera, serial 146821 queued 15:25:15 Received message from Master: op=PointingHead serial=146834 15:25:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:25:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:25:16 Point started: ret=0 15:25:16 point_skyscan result=0 15:25:17 Check angles 15:25:17 SkyScan query 15:25:17 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.795<-17453 Statuses=0009 0009 15:25:17 Msec=0 True Az=109.395 Ze=-81.795 Az status=0009 Ze status=0009 15:25:17 Check angles 15:25:17 SkyScan query 15:25:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.125<-18875 Statuses=0008 0009 15:25:18 Msec=750 True Az=112.995 Ze=-103.125 Az status=0008 Ze status=0009 15:25:18 Check angles 15:25:18 SkyScan query 15:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.095<-20273 Statuses=0008 0009 15:25:19 Msec=1500 True Az=112.995 Ze=-124.095 Az status=0008 Ze status=0009 15:25:19 Check angles 15:25:19 SkyScan query 15:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.02<-21668 Statuses=0008 0009 15:25:19 Msec=2250 True Az=112.995 Ze=-145.02 Az status=0008 Ze status=0009 15:25:20 Check angles 15:25:20 SkyScan query 15:25:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.005<-23067 Statuses=0008 0009 15:25:20 Msec=3000 True Az=112.995 Ze=-166.005 Az status=0008 Ze status=0009 15:25:20 Check angles 15:25:20 SkyScan query 15:25:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:25:21 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:25:21 Message to Master queued w/err=0: serial=146834 error=0 15:25:26 Received message from Master: op=Filter serial=146835 15:25:26 Color wheel filter change from 0 to 0 15:25:26 FLIGetFilterPos err=0 currentPosition=0 15:25:26 FLIGetStepsRemaining err=0 RemainingSteps=0 15:25:26 Filter is already there-color wheel unchanged 15:25:26 Received message from Master: op=Shutter serial=146836 15:25:26 Shutter LASER open 15:25:26 Received message from Camera: op=State serial=146838 15:25:26 GetSingleValue result=40 Value=cccccccc 15:25:26 SkyScan query 15:25:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:25:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:27 Parameters OK 15:25:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:27 Set A/D data flow result=40 15:25:27 Set A/D channel type result=40 15:25:27 Set A/D encoding result=40 15:25:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:27 Set channel filter=0.000000e+000 result=40 15:25:27 Config A/D Result=40 15:25:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:27 Get A/D filter: -9.255963e+061 result=40 15:25:27 Get A/D value=-858993460 result=40 15:25:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:27 Parameters OK 15:25:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:27 Set A/D data flow result=40 15:25:27 Set A/D channel type result=40 15:25:27 Set A/D encoding result=40 15:25:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:27 Set channel filter=0.000000e+000 result=40 15:25:27 Config A/D Result=40 15:25:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:27 Get A/D filter: -9.255963e+061 result=40 15:25:27 Get A/D value=-858993460 result=40 15:25:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:25:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:25:27 Aux= 15:25:27 Message to Camera, serial 146838 queued 15:25:35 Received message from Master: op=Shutter serial=146848 15:25:35 Shutter LASER close 15:25:36 Received message from Master: op=PointingHead serial=146852 15:25:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:25:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:25:36 Point started: ret=0 15:25:36 point_skyscan result=0 15:25:37 Check angles 15:25:37 SkyScan query 15:25:37 SkyScan query done: ret=0 az=89.535<-5969 ze=156.765<-1549 Statuses=0009 0009 15:25:37 Msec=0 True Az=89.535 Ze=156.765 Az status=0009 Ze status=0009 15:25:38 Check angles 15:25:38 SkyScan query 15:25:38 SkyScan query done: ret=0 az=71.985<-4799 ze=135.825<-2945 Statuses=0009 0009 15:25:38 Msec=750 True Az=71.985 Ze=135.825 Az status=0009 Ze status=0009 15:25:38 Check angles 15:25:38 SkyScan query 15:25:39 SkyScan query done: ret=0 az=54.465<-3631 ze=114.84<-4344 Statuses=0009 0009 15:25:39 Msec=1500 True Az=54.465 Ze=114.84 Az status=0009 Ze status=0009 15:25:39 Check angles 15:25:39 SkyScan query 15:25:40 SkyScan query done: ret=0 az=40.995<-2733 ze=93.9<-5740 Statuses=0009 0009 15:25:40 Msec=2250 True Az=40.995 Ze=93.9 Az status=0009 Ze status=0009 15:25:40 Check angles 15:25:40 SkyScan query 15:25:40 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 [UTC 2018-12-14 15:25:40] 15:25:40 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 15:25:41 Check angles 15:25:41 SkyScan query 15:25:41 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 15:25:41 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 15:25:41 Check angles 15:25:41 SkyScan query 15:25:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:25:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:25:42 Message to Master queued w/err=0: serial=146852 error=0 15:25:47 Received message from Master: op=Filter serial=146853 15:25:47 Color wheel filter change from 0 to 0 15:25:47 FLIGetFilterPos err=0 currentPosition=0 15:25:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:25:47 Filter is already there-color wheel unchanged 15:25:47 Received message from Master: op=Shutter serial=146854 15:25:47 Shutter LASER close 15:25:47 Received message from Camera: op=State serial=146856 15:25:47 GetSingleValue result=40 Value=cccccccc 15:25:47 SkyScan query 15:25:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:25:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:48 Parameters OK 15:25:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:48 Set A/D data flow result=40 15:25:48 Set A/D channel type result=40 15:25:48 Set A/D encoding result=40 15:25:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:48 Set channel filter=0.000000e+000 result=40 15:25:48 Config A/D Result=40 15:25:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:48 Get A/D filter: -9.255963e+061 result=40 15:25:48 Get A/D value=-858993460 result=40 15:25:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:48 Parameters OK 15:25:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:48 Set A/D data flow result=40 15:25:48 Set A/D channel type result=40 15:25:48 Set A/D encoding result=40 15:25:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:48 Set channel filter=0.000000e+000 result=40 15:25:48 Config A/D Result=40 15:25:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:48 Get A/D filter: -9.255963e+061 result=40 15:25:48 Get A/D value=-858993460 result=40 15:25:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:25:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:25:48 Aux= 15:25:48 Message to Camera, serial 146856 queued 15:26:25 Received message from Master: op=PointingHead serial=146869 15:26:25 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:26:25 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:26:25 Point started: ret=0 15:26:25 point_skyscan result=0 15:26:26 Check angles 15:26:26 SkyScan query 15:26:26 SkyScan query done: ret=0 az=63.945<-4263 ze=66.54<-7564 Statuses=0009 0008 15:26:26 Msec=0 True Az=63.945 Ze=66.54 Az status=0009 Ze status=0008 15:26:27 Check angles 15:26:27 SkyScan query 15:26:27 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 15:26:27 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 15:26:27 Check angles 15:26:27 SkyScan query 15:26:28 SkyScan query done: ret=0 az=98.925<-6595 ze=66.495<-7567 Statuses=0009 0008 15:26:28 Msec=1500 True Az=98.925 Ze=66.495 Az status=0009 Ze status=0008 15:26:28 Check angles 15:26:28 SkyScan query 15:26:29 SkyScan query done: ret=0 az=116.445<-7763 ze=66.495<-7567 Statuses=0009 0008 15:26:29 Msec=2250 True Az=116.445 Ze=66.495 Az status=0009 Ze status=0008 15:26:29 Check angles 15:26:29 SkyScan query 15:26:29 SkyScan query done: ret=0 az=133.935<-8929 ze=66.495<-7567 Statuses=0009 0008 15:26:29 Msec=3000 True Az=133.935 Ze=66.495 Az status=0009 Ze status=0008 15:26:30 Check angles 15:26:30 SkyScan query 15:26:30 SkyScan query done: ret=0 az=151.41<-10094 ze=66.495<-7567 Statuses=0009 0008 15:26:30 Msec=3750 True Az=151.41 Ze=66.495 Az status=0009 Ze status=0008 15:26:30 Check angles 15:26:30 SkyScan query 15:26:31 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:26:31 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:26:31 Message to Master queued w/err=0: serial=146869 error=0 15:26:36 Received message from Master: op=Filter serial=146870 15:26:36 Color wheel filter change from 0 to 0 15:26:36 FLIGetFilterPos err=0 currentPosition=0 15:26:36 FLIGetStepsRemaining err=0 RemainingSteps=0 15:26:36 Filter is already there-color wheel unchanged 15:26:36 Received message from Master: op=Shutter serial=146871 15:26:36 Shutter LASER close 15:26:36 Received message from Camera: op=State serial=146873 15:26:36 GetSingleValue result=40 Value=cccccccc 15:26:36 SkyScan query 15:26:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:26:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:37 Parameters OK 15:26:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:37 Set A/D data flow result=40 15:26:37 Set A/D channel type result=40 15:26:37 Set A/D encoding result=40 15:26:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:37 Set channel filter=0.000000e+000 result=40 15:26:37 Config A/D Result=40 15:26:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:37 Get A/D filter: -9.255963e+061 result=40 15:26:37 Get A/D value=-858993460 result=40 15:26:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:37 Parameters OK 15:26:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:37 Set A/D data flow result=40 15:26:37 Set A/D channel type result=40 15:26:37 Set A/D encoding result=40 15:26:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:37 Set channel filter=0.000000e+000 result=40 15:26:37 Config A/D Result=40 15:26:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:37 Get A/D filter: -9.255963e+061 result=40 15:26:37 Get A/D value=-858993460 result=40 15:26:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:37 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:26:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:26:37 Aux= 15:26:37 Message to Camera, serial 146873 queued 15:27:14 Received message from Master: op=PointingHead serial=146886 15:27:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:27:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:27:14 Point started: ret=0 15:27:14 point_skyscan result=0 15:27:15 Check angles 15:27:15 SkyScan query 15:27:15 SkyScan query done: ret=0 az=135.06<-9004 ze=36.765<-9549 Statuses=0009 0009 15:27:15 Msec=0 True Az=135.06 Ze=36.765 Az status=0009 Ze status=0009 15:27:15 Check angles 15:27:15 SkyScan query 15:27:16 SkyScan query done: ret=0 az=117.6<-7840 ze=15.825<-10945 Statuses=0009 0009 15:27:16 Msec=750 True Az=117.6 Ze=15.825 Az status=0009 Ze status=0009 15:27:16 Check angles 15:27:16 SkyScan query 15:27:17 SkyScan query done: ret=0 az=100.215<-6681 ze=-5.145<-12343 Statuses=0009 0009 15:27:17 Msec=1500 True Az=100.215 Ze=-5.145 Az status=0009 Ze status=0009 15:27:17 Check angles 15:27:17 SkyScan query 15:27:17 SkyScan query done: ret=0 az=82.71<-5514 ze=-26.115<-13741 Statuses=0009 0009 15:27:17 Msec=2250 True Az=82.71 Ze=-26.115 Az status=0009 Ze status=0009 15:27:18 Check angles 15:27:18 SkyScan query 15:27:18 SkyScan query done: ret=0 az=64.785<-4319 ze=-38.58<-14572 Statuses=0009 0008 15:27:18 Msec=3000 True Az=64.785 Ze=-38.58 Az status=0009 Ze status=0008 15:27:18 Check angles 15:27:18 SkyScan query 15:27:19 SkyScan query done: ret=0 az=47.37<-3158 ze=-38.52<-14568 Statuses=0009 0008 15:27:19 Msec=3750 True Az=47.37 Ze=-38.52 Az status=0009 Ze status=0008 15:27:19 Check angles 15:27:19 SkyScan query 15:27:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:27:20 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:27:20 Message to Master queued w/err=0: serial=146886 error=0 15:27:25 Received message from Master: op=Filter serial=146887 15:27:25 Color wheel filter change from 0 to 0 15:27:25 FLIGetFilterPos err=0 currentPosition=0 15:27:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:25 Filter is already there-color wheel unchanged 15:27:25 Received message from Master: op=Shutter serial=146888 15:27:25 Shutter LASER close 15:27:25 Received message from Camera: op=State serial=146890 15:27:25 GetSingleValue result=40 Value=cccccccc 15:27:25 SkyScan query 15:27:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:27:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:25 Parameters OK 15:27:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:25 Set A/D data flow result=40 15:27:25 Set A/D channel type result=40 15:27:25 Set A/D encoding result=40 15:27:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:25 Set channel filter=0.000000e+000 result=40 15:27:25 Config A/D Result=40 15:27:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:25 Get A/D filter: -9.255963e+061 result=40 15:27:25 Get A/D value=-858993460 result=40 15:27:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:25 Parameters OK 15:27:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:25 Set A/D data flow result=40 15:27:25 Set A/D channel type result=40 15:27:25 Set A/D encoding result=40 15:27:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:25 Set channel filter=0.000000e+000 result=40 15:27:25 Config A/D Result=40 15:27:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:25 Get A/D filter: -9.255963e+061 result=40 15:27:25 Get A/D value=-858993460 result=40 15:27:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:25 Aux= 15:27:25 Message to Camera, serial 146890 queued 15:28:02 Received message from Master: op=PointingHead serial=146903 15:28:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:28:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:28:03 Point started: ret=0 15:28:03 point_skyscan result=0 15:28:03 Check angles 15:28:03 SkyScan query 15:28:04 SkyScan query done: ret=0 az=64.305<-4287 ze=-68.565<-16571 Statuses=0009 0009 15:28:04 Msec=0 True Az=64.305 Ze=-68.565 Az status=0009 Ze status=0009 15:28:04 Check angles 15:28:04 SkyScan query 15:28:05 SkyScan query done: ret=0 az=82.215<-5481 ze=-89.955<-17997 Statuses=0009 0009 15:28:05 Msec=750 True Az=82.215 Ze=-89.955 Az status=0009 Ze status=0009 15:28:05 Check angles 15:28:05 SkyScan query 15:28:06 SkyScan query done: ret=0 az=99.57<-6638 ze=-110.925<-19395 Statuses=0009 0009 15:28:06 Msec=1500 True Az=99.57 Ze=-110.925 Az status=0009 Ze status=0009 15:28:06 Check angles 15:28:06 SkyScan query 15:28:06 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.82<-20788 Statuses=0009 0009 15:28:06 Msec=2250 True Az=117.045 Ze=-131.82 Az status=0009 Ze status=0009 15:28:06 Check angles 15:28:06 SkyScan query 15:28:07 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 15:28:07 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 15:28:07 Check angles 15:28:07 SkyScan query 15:28:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 15:28:08 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 15:28:08 Message to Master queued w/err=0: serial=146903 error=0 15:28:13 Received message from Master: op=Filter serial=146904 15:28:13 Color wheel filter change from 0 to 0 15:28:13 FLIGetFilterPos err=0 currentPosition=0 15:28:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:28:13 Filter is already there-color wheel unchanged 15:28:13 Received message from Master: op=Shutter serial=146905 15:28:13 Shutter LASER close 15:28:13 Received message from Camera: op=State serial=146907 15:28:13 GetSingleValue result=40 Value=cccccccc 15:28:13 SkyScan query 15:28:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:28:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:14 Parameters OK 15:28:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:14 Set A/D data flow result=40 15:28:14 Set A/D channel type result=40 15:28:14 Set A/D encoding result=40 15:28:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:14 Set channel filter=0.000000e+000 result=40 15:28:14 Config A/D Result=40 15:28:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:14 Get A/D filter: -9.255963e+061 result=40 15:28:14 Get A/D value=-858993460 result=40 15:28:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:14 Parameters OK 15:28:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:14 Set A/D data flow result=40 15:28:14 Set A/D channel type result=40 15:28:14 Set A/D encoding result=40 15:28:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:14 Set channel filter=0.000000e+000 result=40 15:28:14 Config A/D Result=40 15:28:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:14 Get A/D filter: -9.255963e+061 result=40 15:28:14 Get A/D value=-858993460 result=40 15:28:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:28:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:28:14 Aux= 15:28:14 Message to Camera, serial 146907 queued 15:28:50 Received message from Master: op=PointingHead serial=146920 15:28:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:28:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:28:51 Point started: ret=0 15:28:51 point_skyscan result=0 15:28:51 Check angles 15:28:51 SkyScan query 15:28:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0009 0009 15:28:52 Msec=0 True Az=112.995 Ze=-171.165 Az status=0009 Ze status=0009 15:28:52 Check angles 15:28:52 SkyScan query 15:28:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:28:53 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:28:53 Message to Master queued w/err=0: serial=146920 error=0 15:28:58 Received message from Master: op=Filter serial=146921 15:28:58 Color wheel filter change from 0 to 0 15:28:58 FLIGetFilterPos err=0 currentPosition=0 15:28:58 FLIGetStepsRemaining err=0 RemainingSteps=0 15:28:58 Filter is already there-color wheel unchanged 15:28:58 Received message from Master: op=Shutter serial=146922 15:28:58 Shutter LASER open 15:28:58 Received message from Camera: op=State serial=146924 15:28:58 GetSingleValue result=40 Value=cccccccc 15:28:58 SkyScan query 15:28:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:28:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:59 Parameters OK 15:28:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:59 Set A/D data flow result=40 15:28:59 Set A/D channel type result=40 15:28:59 Set A/D encoding result=40 15:28:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:59 Set channel filter=0.000000e+000 result=40 15:28:59 Config A/D Result=40 15:28:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:59 Get A/D filter: -9.255963e+061 result=40 15:28:59 Get A/D value=-858993460 result=40 15:28:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:59 Parameters OK 15:28:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:59 Set A/D data flow result=40 15:28:59 Set A/D channel type result=40 15:28:59 Set A/D encoding result=40 15:28:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:59 Set channel filter=0.000000e+000 result=40 15:28:59 Config A/D Result=40 15:28:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:59 Get A/D filter: -9.255963e+061 result=40 15:28:59 Get A/D value=-858993460 result=40 15:28:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:28:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:28:59 Aux= 15:28:59 Message to Camera, serial 146924 queued 15:29:07 Received message from Master: op=Shutter serial=146934 15:29:07 Shutter LASER close 15:29:08 Received message from Master: op=PointingHead serial=146938 15:29:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:29:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:29:08 Point started: ret=0 15:29:08 point_skyscan result=0 15:29:09 Check angles 15:29:09 SkyScan query 15:29:09 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.13<-21542 Statuses=0009 0009 15:29:09 Msec=0 True Az=136.14 Ze=-143.13 Az status=0009 Ze status=0009 15:29:10 Check angles 15:29:10 SkyScan query 15:29:10 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.115<-20141 Statuses=0009 0009 15:29:10 Msec=750 True Az=153.555 Ze=-122.115 Az status=0009 Ze status=0009 15:29:10 Check angles 15:29:10 SkyScan query 15:29:11 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.175<-18745 Statuses=0009 0009 15:29:11 Msec=1500 True Az=171.06 Ze=-101.175 Az status=0009 Ze status=0009 15:29:11 Check angles 15:29:11 SkyScan query 15:29:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 15:29:12 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 15:29:12 Check angles 15:29:12 SkyScan query 15:29:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.25<-15950 Statuses=0008 0009 15:29:12 Msec=3000 True Az=176.01 Ze=-59.25 Az status=0008 Ze status=0009 15:29:13 Check angles 15:29:13 SkyScan query 15:29:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:29:13 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:29:13 Message to Master queued w/err=0: serial=146938 error=0 15:29:18 Received message from Master: op=Filter serial=146939 15:29:18 Color wheel filter change from 0 to 0 15:29:18 FLIGetFilterPos err=0 currentPosition=0 15:29:18 FLIGetStepsRemaining err=0 RemainingSteps=0 15:29:18 Filter is already there-color wheel unchanged 15:29:18 Received message from Master: op=Shutter serial=146940 15:29:18 Shutter LASER close 15:29:19 Received message from Camera: op=State serial=146942 15:29:19 GetSingleValue result=40 Value=cccccccc 15:29:19 SkyScan query 15:29:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:29:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:19 Parameters OK 15:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:19 Set A/D data flow result=40 15:29:19 Set A/D channel type result=40 15:29:19 Set A/D encoding result=40 15:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:19 Set channel filter=0.000000e+000 result=40 15:29:19 Config A/D Result=40 15:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:19 Get A/D filter: -9.255963e+061 result=40 15:29:19 Get A/D value=-858993460 result=40 15:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:19 Parameters OK 15:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:19 Set A/D data flow result=40 15:29:19 Set A/D channel type result=40 15:29:19 Set A/D encoding result=40 15:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:19 Set channel filter=0.000000e+000 result=40 15:29:19 Config A/D Result=40 15:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:19 Get A/D filter: -9.255963e+061 result=40 15:29:19 Get A/D value=-858993460 result=40 15:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:29:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:29:19 Aux= 15:29:19 Message to Camera, serial 146942 queued 15:29:56 Received message from Master: op=PointingHead serial=146955 15:29:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:29:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:29:56 Point started: ret=0 15:29:56 point_skyscan result=0 15:29:57 Check angles 15:29:57 SkyScan query 15:29:58 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.02<-13468 Statuses=0009 0009 15:29:58 Msec=0 True Az=153.195 Ze=-22.02 Az status=0009 Ze status=0009 15:29:58 Check angles 15:29:58 SkyScan query 15:29:58 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.035<-12069 Statuses=0009 0009 15:29:58 Msec=750 True Az=135.78 Ze=-1.035 Az status=0009 Ze status=0009 15:29:59 Check angles 15:29:59 SkyScan query 15:29:59 SkyScan query done: ret=0 az=118.2<-7880 ze=19.89<-10674 Statuses=0009 0009 15:29:59 Msec=1500 True Az=118.2 Ze=19.89 Az status=0009 Ze status=0009 15:29:59 Check angles 15:29:59 SkyScan query 15:30:00 SkyScan query done: ret=0 az=100.83<-6722 ze=40.86<-9276 Statuses=0009 0009 15:30:00 Msec=2250 True Az=100.83 Ze=40.86 Az status=0009 Ze status=0009 15:30:00 Check angles 15:30:00 SkyScan query 15:30:01 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:30:01 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:30:01 Check angles 15:30:01 SkyScan query 15:30:01 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 15:30:01 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 15:30:01 Message to Master queued w/err=0: serial=146955 error=0 15:30:06 Received message from Master: op=Filter serial=146956 15:30:06 Color wheel filter change from 0 to 0 15:30:06 FLIGetFilterPos err=0 currentPosition=0 15:30:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:30:06 Filter is already there-color wheel unchanged 15:30:07 Received message from Master: op=Shutter serial=146957 15:30:07 Shutter LASER close 15:30:07 Received message from Camera: op=State serial=146959 15:30:07 GetSingleValue result=40 Value=cccccccc 15:30:07 SkyScan query 15:30:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:30:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:07 Parameters OK 15:30:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:07 Set A/D data flow result=40 15:30:07 Set A/D channel type result=40 15:30:07 Set A/D encoding result=40 15:30:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:07 Set channel filter=0.000000e+000 result=40 15:30:07 Config A/D Result=40 15:30:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:07 Get A/D filter: -9.255963e+061 result=40 15:30:07 Get A/D value=-858993460 result=40 15:30:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:07 Parameters OK 15:30:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:07 Set A/D data flow result=40 15:30:07 Set A/D channel type result=40 15:30:07 Set A/D encoding result=40 15:30:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:07 Set channel filter=0.000000e+000 result=40 15:30:07 Config A/D Result=40 15:30:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:07 Get A/D filter: -9.255963e+061 result=40 15:30:07 Get A/D value=-858993460 result=40 15:30:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:30:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:30:07 Aux= 15:30:07 Message to Camera, serial 146959 queued 15:30:44 Received message from Master: op=PointingHead serial=146972 15:30:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:30:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:30:44 Point started: ret=0 15:30:44 point_skyscan result=0 15:30:45 Check angles 15:30:45 SkyScan query 15:30:46 SkyScan query done: ret=0 az=108.735<-7249 ze=38.475<-9435 Statuses=0009 0008 15:30:46 Msec=0 True Az=108.735 Ze=38.475 Az status=0009 Ze status=0008 15:30:46 Check angles 15:30:46 SkyScan query 15:30:46 SkyScan query done: ret=0 az=126.255<-8417 ze=38.505<-9433 Statuses=0009 0008 15:30:46 Msec=750 True Az=126.255 Ze=38.505 Az status=0009 Ze status=0008 15:30:47 Check angles 15:30:47 SkyScan query 15:30:47 SkyScan query done: ret=0 az=144.015<-9601 ze=38.505<-9433 Statuses=0009 0008 15:30:47 Msec=1500 True Az=144.015 Ze=38.505 Az status=0009 Ze status=0008 15:30:47 Check angles 15:30:47 SkyScan query 15:30:48 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 15:30:48 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 15:30:48 Check angles 15:30:48 SkyScan query 15:30:49 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:30:49 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:30:49 Check angles 15:30:49 SkyScan query 15:30:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:30:50 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:30:50 Message to Master queued w/err=0: serial=146972 error=0 15:30:55 Received message from Master: op=Filter serial=146973 15:30:55 Color wheel filter change from 0 to 0 15:30:55 FLIGetFilterPos err=0 currentPosition=0 15:30:55 FLIGetStepsRemaining err=0 RemainingSteps=0 15:30:55 Filter is already there-color wheel unchanged 15:30:55 Received message from Master: op=Shutter serial=146974 15:30:55 Shutter LASER close 15:30:55 Received message from Camera: op=State serial=146976 15:30:55 GetSingleValue result=40 Value=cccccccc 15:30:55 SkyScan query 15:30:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:30:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:55 Parameters OK 15:30:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:55 Set A/D data flow result=40 15:30:55 Set A/D channel type result=40 15:30:55 Set A/D encoding result=40 15:30:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:55 Set channel filter=0.000000e+000 result=40 15:30:55 Config A/D Result=40 15:30:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:55 Get A/D filter: -9.255963e+061 result=40 15:30:55 Get A/D value=-858993460 result=40 15:30:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:55 Parameters OK 15:30:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:55 Set A/D data flow result=40 15:30:55 Set A/D channel type result=40 15:30:55 Set A/D encoding result=40 15:30:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:55 Set channel filter=0.000000e+000 result=40 15:30:55 Config A/D Result=40 15:30:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:55 Get A/D filter: -9.255963e+061 result=40 15:30:55 Get A/D value=-858993460 result=40 15:30:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:30:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:30:55 Aux= 15:30:55 Message to Camera, serial 146976 queued 15:31:32 Received message from Master: op=PointingHead serial=146989 15:31:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:31:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:31:32 Point started: ret=0 15:31:32 point_skyscan result=0 15:31:33 Check angles 15:31:33 SkyScan query 15:31:34 SkyScan query done: ret=0 az=152.745<-10183 ze=8.355<-11443 Statuses=0009 0009 15:31:34 Msec=0 True Az=152.745 Ze=8.355 Az status=0009 Ze status=0009 15:31:34 Check angles 15:31:34 SkyScan query 15:31:35 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.57<-12838 Statuses=0009 0009 15:31:35 Msec=750 True Az=135.3 Ze=-12.57 Az status=0009 Ze status=0009 15:31:35 Check angles 15:31:35 SkyScan query 15:31:35 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.525<-14235 Statuses=0009 0009 15:31:35 Msec=1500 True Az=117.75 Ze=-33.525 Az status=0009 Ze status=0009 15:31:35 Check angles 15:31:35 SkyScan query 15:31:36 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.57<-15438 Statuses=0009 0009 15:31:36 Msec=2250 True Az=100.41 Ze=-51.57 Az status=0009 Ze status=0009 15:31:36 Check angles 15:31:36 SkyScan query 15:31:37 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 15:31:37 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 15:31:37 Check angles 15:31:37 SkyScan query 15:31:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:31:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:31:38 Message to Master queued w/err=0: serial=146989 error=0 15:31:43 Received message from Master: op=Filter serial=146990 15:31:43 Color wheel filter change from 0 to 0 15:31:43 FLIGetFilterPos err=0 currentPosition=0 15:31:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:31:43 Filter is already there-color wheel unchanged 15:31:43 Received message from Master: op=Shutter serial=146991 15:31:43 Shutter LASER close 15:31:43 Received message from Camera: op=State serial=146993 15:31:43 GetSingleValue result=40 Value=cccccccc 15:31:43 SkyScan query 15:31:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:31:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:43 Parameters OK 15:31:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:43 Set A/D data flow result=40 15:31:43 Set A/D channel type result=40 15:31:43 Set A/D encoding result=40 15:31:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:43 Set channel filter=0.000000e+000 result=40 15:31:43 Config A/D Result=40 15:31:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:43 Get A/D filter: -9.255963e+061 result=40 15:31:43 Get A/D value=-858993460 result=40 15:31:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:43 Parameters OK 15:31:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:43 Set A/D data flow result=40 15:31:43 Set A/D channel type result=40 15:31:43 Set A/D encoding result=40 15:31:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:43 Set channel filter=0.000000e+000 result=40 15:31:43 Config A/D Result=40 15:31:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:43 Get A/D filter: -9.255963e+061 result=40 15:31:43 Get A/D value=-858993460 result=40 15:31:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:31:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:31:43 Aux= 15:31:43 Message to Camera, serial 146993 queued 15:32:20 Received message from Master: op=PointingHead serial=147006 15:32:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:32:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:32:21 Point started: ret=0 15:32:21 point_skyscan result=0 15:32:21 Check angles 15:32:21 SkyScan query 15:32:22 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.03<-17402 Statuses=0009 0009 15:32:22 Msec=0 True Az=108.99 Ze=-81.03 Az status=0009 Ze status=0009 15:32:22 Check angles 15:32:22 SkyScan query 15:32:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.45<-18830 Statuses=0008 0009 15:32:23 Msec=750 True Az=112.995 Ze=-102.45 Az status=0008 Ze status=0009 15:32:23 Check angles 15:32:23 SkyScan query 15:32:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 15:32:23 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 15:32:24 Check angles 15:32:24 SkyScan query 15:32:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 15:32:24 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 15:32:24 Check angles 15:32:24 SkyScan query 15:32:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 15:32:25 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 15:32:25 Check angles 15:32:25 SkyScan query 15:32:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 15:32:26 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 15:32:26 Message to Master queued w/err=0: serial=147006 error=0 15:32:31 Received message from Master: op=Filter serial=147007 15:32:31 Color wheel filter change from 0 to 0 15:32:31 FLIGetFilterPos err=0 currentPosition=0 15:32:31 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:31 Filter is already there-color wheel unchanged 15:32:31 Received message from Master: op=Shutter serial=147008 15:32:31 Shutter LASER open 15:32:31 Received message from Camera: op=State serial=147010 15:32:31 GetSingleValue result=40 Value=cccccccc 15:32:31 SkyScan query 15:32:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:32:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:32 Parameters OK 15:32:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:32 Set A/D data flow result=40 15:32:32 Set A/D channel type result=40 15:32:32 Set A/D encoding result=40 15:32:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:32 Set channel filter=0.000000e+000 result=40 15:32:32 Config A/D Result=40 15:32:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:32 Get A/D filter: -9.255963e+061 result=40 15:32:32 Get A/D value=-858993460 result=40 15:32:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:32 Parameters OK 15:32:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:32 Set A/D data flow result=40 15:32:32 Set A/D channel type result=40 15:32:32 Set A/D encoding result=40 15:32:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:32 Set channel filter=0.000000e+000 result=40 15:32:32 Config A/D Result=40 15:32:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:32 Get A/D filter: -9.255963e+061 result=40 15:32:32 Get A/D value=-858993460 result=40 15:32:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:32:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:32:32 Aux= 15:32:32 Message to Camera, serial 147010 queued 15:32:40 Received message from Master: op=Shutter serial=147020 15:32:40 Shutter LASER close 15:32:40 Received message from Master: op=PointingHead serial=147024 15:32:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:32:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:32:41 Point started: ret=0 15:32:41 point_skyscan result=0 15:32:42 Check angles 15:32:42 SkyScan query 15:32:42 SkyScan query done: ret=0 az=89.595<-5973 ze=156.855<-1543 Statuses=0009 0009 15:32:42 Msec=0 True Az=89.595 Ze=156.855 Az status=0009 Ze status=0009 15:32:42 Check angles 15:32:42 SkyScan query 15:32:43 SkyScan query done: ret=0 az=72.03<-4802 ze=135.915<-2939 Statuses=0009 0009 15:32:43 Msec=750 True Az=72.03 Ze=135.915 Az status=0009 Ze status=0009 15:32:43 Check angles 15:32:43 SkyScan query 15:32:44 SkyScan query done: ret=0 az=54.735<-3649 ze=114.915<-4339 Statuses=0009 0009 15:32:44 Msec=1500 True Az=54.735 Ze=114.915 Az status=0009 Ze status=0009 15:32:44 Check angles 15:32:44 SkyScan query 15:32:44 SkyScan query done: ret=0 az=40.98<-2732 ze=93.54<-5764 Statuses=0009 0009 15:32:44 Msec=2250 True Az=40.98 Ze=93.54 Az status=0009 Ze status=0009 15:32:45 Check angles 15:32:45 SkyScan query 15:32:45 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 15:32:45 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 15:32:45 Check angles 15:32:45 SkyScan query 15:32:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 15:32:46 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 15:32:46 Check angles 15:32:46 SkyScan query 15:32:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:32:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:32:47 Message to Master queued w/err=0: serial=147024 error=0 15:32:52 Received message from Master: op=Filter serial=147025 15:32:52 Color wheel filter change from 0 to 0 15:32:52 FLIGetFilterPos err=0 currentPosition=0 15:32:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:52 Filter is already there-color wheel unchanged 15:32:52 Received message from Master: op=Shutter serial=147026 15:32:52 Shutter LASER close 15:32:52 Received message from Camera: op=State serial=147028 15:32:52 GetSingleValue result=40 Value=cccccccc 15:32:52 SkyScan query 15:32:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:32:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:53 Parameters OK 15:32:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:53 Set A/D data flow result=40 15:32:53 Set A/D channel type result=40 15:32:53 Set A/D encoding result=40 15:32:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:53 Set channel filter=0.000000e+000 result=40 15:32:53 Config A/D Result=40 15:32:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:53 Get A/D filter: -9.255963e+061 result=40 15:32:53 Get A/D value=-858993460 result=40 15:32:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:53 Parameters OK 15:32:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:53 Set A/D data flow result=40 15:32:53 Set A/D channel type result=40 15:32:53 Set A/D encoding result=40 15:32:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:53 Set channel filter=0.000000e+000 result=40 15:32:53 Config A/D Result=40 15:32:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:53 Get A/D filter: -9.255963e+061 result=40 15:32:53 Get A/D value=-858993460 result=40 15:32:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:32:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:32:53 Aux= 15:32:53 Message to Camera, serial 147028 queued 15:33:29 Received message from Master: op=PointingHead serial=147041 15:33:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:33:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:33:30 Point started: ret=0 15:33:30 point_skyscan result=0 15:33:30 Check angles 15:33:30 SkyScan query 15:33:31 SkyScan query done: ret=0 az=64.14<-4276 ze=66.555<-7563 Statuses=0009 0008 15:33:31 Msec=0 True Az=64.14 Ze=66.555 Az status=0009 Ze status=0008 15:33:31 Check angles 15:33:31 SkyScan query 15:33:32 SkyScan query done: ret=0 az=81.585<-5439 ze=66.495<-7567 Statuses=0009 0008 15:33:32 Msec=750 True Az=81.585 Ze=66.495 Az status=0009 Ze status=0008 15:33:32 Check angles 15:33:32 SkyScan query 15:33:33 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 15:33:33 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 15:33:33 Check angles 15:33:33 SkyScan query 15:33:33 SkyScan query done: ret=0 az=116.925<-7795 ze=66.495<-7567 Statuses=0009 0008 15:33:33 Msec=2250 True Az=116.925 Ze=66.495 Az status=0009 Ze status=0008 15:33:33 Check angles 15:33:33 SkyScan query 15:33:34 SkyScan query done: ret=0 az=134.52<-8968 ze=66.495<-7567 Statuses=0009 0008 15:33:34 Msec=3000 True Az=134.52 Ze=66.495 Az status=0009 Ze status=0008 15:33:34 Check angles 15:33:34 SkyScan query 15:33:35 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 15:33:35 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 15:33:35 Check angles 15:33:35 SkyScan query 15:33:36 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:33:36 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:33:36 Message to Master queued w/err=0: serial=147041 error=0 15:33:41 Received message from Master: op=Filter serial=147042 15:33:41 Color wheel filter change from 0 to 0 15:33:41 FLIGetFilterPos err=0 currentPosition=0 15:33:41 FLIGetStepsRemaining err=0 RemainingSteps=0 15:33:41 Filter is already there-color wheel unchanged 15:33:41 Received message from Master: op=Shutter serial=147043 15:33:41 Shutter LASER close 15:33:41 Received message from Camera: op=State serial=147045 15:33:41 GetSingleValue result=40 Value=cccccccc 15:33:41 SkyScan query 15:33:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:33:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:41 Parameters OK 15:33:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:41 Set A/D data flow result=40 15:33:41 Set A/D channel type result=40 15:33:41 Set A/D encoding result=40 15:33:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:41 Set channel filter=0.000000e+000 result=40 15:33:41 Config A/D Result=40 15:33:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:41 Get A/D filter: -9.255963e+061 result=40 15:33:41 Get A/D value=-858993460 result=40 15:33:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:41 Parameters OK 15:33:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:41 Set A/D data flow result=40 15:33:41 Set A/D channel type result=40 15:33:41 Set A/D encoding result=40 15:33:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:41 Set channel filter=0.000000e+000 result=40 15:33:41 Config A/D Result=40 15:33:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:41 Get A/D filter: -9.255963e+061 result=40 15:33:41 Get A/D value=-858993460 result=40 15:33:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:33:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:33:41 Aux= 15:33:41 Message to Camera, serial 147045 queued 15:34:18 Received message from Master: op=PointingHead serial=147058 15:34:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:34:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:34:19 Point started: ret=0 15:34:19 point_skyscan result=0 15:34:19 Check angles 15:34:19 SkyScan query 15:34:20 SkyScan query done: ret=0 az=135.165<-9011 ze=36.975<-9535 Statuses=0009 0009 15:34:20 Msec=0 True Az=135.165 Ze=36.975 Az status=0009 Ze status=0009 15:34:20 Check angles 15:34:20 SkyScan query 15:34:21 SkyScan query done: ret=0 az=117.72<-7848 ze=16.005<-10933 Statuses=0009 0009 15:34:21 Msec=750 True Az=117.72 Ze=16.005 Az status=0009 Ze status=0009 15:34:21 Check angles 15:34:21 SkyScan query 15:34:21 SkyScan query done: ret=0 az=100.35<-6690 ze=-4.905<-12327 Statuses=0009 0009 15:34:21 Msec=1500 True Az=100.35 Ze=-4.905 Az status=0009 Ze status=0009 15:34:22 Check angles 15:34:22 SkyScan query 15:34:22 SkyScan query done: ret=0 az=82.815<-5521 ze=-25.89<-13726 Statuses=0009 0009 15:34:22 Msec=2250 True Az=82.815 Ze=-25.89 Az status=0009 Ze status=0009 15:34:22 Check angles 15:34:22 SkyScan query 15:34:23 SkyScan query done: ret=0 az=65.28<-4352 ze=-38.595<-14573 Statuses=0009 0008 15:34:23 Msec=3000 True Az=65.28 Ze=-38.595 Az status=0009 Ze status=0008 15:34:23 Check angles 15:34:23 SkyScan query 15:34:24 SkyScan query done: ret=0 az=47.895<-3193 ze=-38.52<-14568 Statuses=0009 0008 15:34:24 Msec=3750 True Az=47.895 Ze=-38.52 Az status=0009 Ze status=0008 15:34:24 Check angles 15:34:24 SkyScan query 15:34:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:34:24 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:34:24 Message to Master queued w/err=0: serial=147058 error=0 15:34:29 Received message from Master: op=Filter serial=147059 15:34:29 Color wheel filter change from 0 to 0 15:34:29 FLIGetFilterPos err=0 currentPosition=0 15:34:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:34:29 Filter is already there-color wheel unchanged 15:34:30 Received message from Master: op=Shutter serial=147060 15:34:30 Shutter LASER close 15:34:30 Received message from Camera: op=State serial=147062 15:34:30 GetSingleValue result=40 Value=cccccccc 15:34:30 SkyScan query 15:34:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:34:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:30 Parameters OK 15:34:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:30 Set A/D data flow result=40 15:34:30 Set A/D channel type result=40 15:34:30 Set A/D encoding result=40 15:34:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:30 Set channel filter=0.000000e+000 result=40 15:34:30 Config A/D Result=40 15:34:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:30 Get A/D filter: -9.255963e+061 result=40 15:34:30 Get A/D value=-858993460 result=40 15:34:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:30 Parameters OK 15:34:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:30 Set A/D data flow result=40 15:34:30 Set A/D channel type result=40 15:34:30 Set A/D encoding result=40 15:34:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:30 Set channel filter=0.000000e+000 result=40 15:34:30 Config A/D Result=40 15:34:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:30 Get A/D filter: -9.255963e+061 result=40 15:34:30 Get A/D value=-858993460 result=40 15:34:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:34:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:34:30 Aux= 15:34:30 Message to Camera, serial 147062 queued 15:35:06 Received message from Master: op=PointingHead serial=147074 15:35:06 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:35:06 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:35:06 Point started: ret=0 15:35:06 point_skyscan result=0 15:35:07 Check angles 15:35:07 SkyScan query 15:35:08 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.145<-16543 Statuses=0009 0009 15:35:08 Msec=0 True Az=63.885 Ze=-68.145 Az status=0009 Ze status=0009 15:35:08 Check angles 15:35:08 SkyScan query 15:35:09 SkyScan query done: ret=0 az=81.765<-5451 ze=-89.565<-17971 Statuses=0009 0009 15:35:09 Msec=750 True Az=81.765 Ze=-89.565 Az status=0009 Ze status=0009 15:35:09 Check angles 15:35:09 SkyScan query 15:35:09 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.52<-19368 Statuses=0009 0009 15:35:09 Msec=1500 True Az=99.18 Ze=-110.52 Az status=0009 Ze status=0009 15:35:09 Check angles 15:35:09 SkyScan query 15:35:10 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.415<-20761 Statuses=0009 0009 15:35:10 Msec=2250 True Az=116.64 Ze=-131.415 Az status=0009 Ze status=0009 15:35:10 Check angles 15:35:10 SkyScan query 15:35:11 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 15:35:11 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 15:35:11 Check angles 15:35:11 SkyScan query 15:35:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 15:35:12 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 15:35:12 Message to Master queued w/err=0: serial=147074 error=0 15:35:17 Received message from Master: op=Filter serial=147075 15:35:17 Color wheel filter change from 0 to 0 15:35:17 FLIGetFilterPos err=0 currentPosition=0 15:35:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:35:17 Filter is already there-color wheel unchanged 15:35:17 Received message from Master: op=Shutter serial=147076 15:35:17 Shutter LASER close 15:35:17 Received message from Camera: op=State serial=147078 15:35:17 GetSingleValue result=40 Value=cccccccc 15:35:17 SkyScan query 15:35:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:35:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:35:17 Parameters OK 15:35:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:35:17 Set A/D data flow result=40 15:35:17 Set A/D channel type result=40 15:35:17 Set A/D encoding result=40 15:35:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:35:17 Set channel filter=0.000000e+000 result=40 15:35:17 Config A/D Result=40 15:35:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:35:17 Get A/D filter: -9.255963e+061 result=40 15:35:17 Get A/D value=-858993460 result=40 15:35:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:35:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:35:17 Parameters OK 15:35:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:35:17 Set A/D data flow result=40 15:35:17 Set A/D channel type result=40 15:35:17 Set A/D encoding result=40 15:35:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:35:17 Set channel filter=0.000000e+000 result=40 15:35:17 Config A/D Result=40 15:35:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:35:17 Get A/D filter: -9.255963e+061 result=40 15:35:17 Get A/D value=-858993460 result=40 15:35:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:35:17 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:35:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:35:17 Aux= 15:35:17 Message to Camera, serial 147078 queued [UTC 2018-12-14 15:35:52] 15:35:54 Received message from Master: op=PointingHead serial=147091 15:35:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:35:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:35:54 Point started: ret=0 15:35:54 point_skyscan result=0 15:35:55 Check angles 15:35:55 SkyScan query 15:35:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 15:35:56 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 15:35:56 Check angles 15:35:56 SkyScan query 15:35:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:35:57 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:35:57 Message to Master queued w/err=0: serial=147091 error=0 15:36:02 Received message from Master: op=Filter serial=147092 15:36:02 Color wheel filter change from 0 to 0 15:36:02 FLIGetFilterPos err=0 currentPosition=0 15:36:02 FLIGetStepsRemaining err=0 RemainingSteps=0 15:36:02 Filter is already there-color wheel unchanged 15:36:02 Received message from Master: op=Shutter serial=147093 15:36:02 Shutter LASER open 15:36:02 Received message from Camera: op=State serial=147095 15:36:02 GetSingleValue result=40 Value=cccccccc 15:36:02 SkyScan query 15:36:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.98<-23532 Statuses=0008 0008 15:36:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:02 Parameters OK 15:36:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:02 Set A/D data flow result=40 15:36:02 Set A/D channel type result=40 15:36:02 Set A/D encoding result=40 15:36:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:02 Set channel filter=0.000000e+000 result=40 15:36:02 Config A/D Result=40 15:36:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:02 Get A/D filter: -9.255963e+061 result=40 15:36:02 Get A/D value=-858993460 result=40 15:36:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:02 Parameters OK 15:36:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:02 Set A/D data flow result=40 15:36:02 Set A/D channel type result=40 15:36:02 Set A/D encoding result=40 15:36:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:02 Set channel filter=0.000000e+000 result=40 15:36:02 Config A/D Result=40 15:36:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:02 Get A/D filter: -9.255963e+061 result=40 15:36:02 Get A/D value=-858993460 result=40 15:36:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.979996 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:36:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:36:02 Aux= 15:36:02 Message to Camera, serial 147095 queued 15:36:11 Received message from Master: op=Shutter serial=147105 15:36:11 Shutter LASER close 15:36:11 Received message from Master: op=PointingHead serial=147109 15:36:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:36:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:36:12 Point started: ret=0 15:36:12 point_skyscan result=0 15:36:13 Check angles 15:36:13 SkyScan query 15:36:13 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.205<-21547 Statuses=0009 0009 15:36:13 Msec=0 True Az=135.99 Ze=-143.205 Az status=0009 Ze status=0009 15:36:13 Check angles 15:36:13 SkyScan query 15:36:14 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.235<-20149 Statuses=0009 0009 15:36:14 Msec=750 True Az=153.525 Ze=-122.235 Az status=0009 Ze status=0009 15:36:14 Check angles 15:36:14 SkyScan query 15:36:15 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.695<-18713 Statuses=0009 0009 15:36:15 Msec=1500 True Az=171.45 Ze=-100.695 Az status=0009 Ze status=0009 15:36:15 Check angles 15:36:15 SkyScan query 15:36:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.92<-17328 Statuses=0008 0009 15:36:15 Msec=2250 True Az=176.01 Ze=-79.92 Az status=0008 Ze status=0009 15:36:16 Check angles 15:36:16 SkyScan query 15:36:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.935<-15929 Statuses=0008 0009 15:36:16 Msec=3000 True Az=176.01 Ze=-58.935 Az status=0008 Ze status=0009 15:36:16 Check angles 15:36:16 SkyScan query 15:36:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:36:17 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:36:17 Message to Master queued w/err=0: serial=147109 error=0 15:36:22 Received message from Master: op=Filter serial=147110 15:36:22 Color wheel filter change from 0 to 0 15:36:22 FLIGetFilterPos err=0 currentPosition=0 15:36:22 FLIGetStepsRemaining err=0 RemainingSteps=0 15:36:22 Filter is already there-color wheel unchanged 15:36:22 Received message from Master: op=Shutter serial=147111 15:36:22 Shutter LASER close 15:36:22 Received message from Camera: op=State serial=147113 15:36:22 GetSingleValue result=40 Value=cccccccc 15:36:22 SkyScan query 15:36:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:36:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:23 Parameters OK 15:36:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:23 Set A/D data flow result=40 15:36:23 Set A/D channel type result=40 15:36:23 Set A/D encoding result=40 15:36:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:23 Set channel filter=0.000000e+000 result=40 15:36:23 Config A/D Result=40 15:36:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:23 Get A/D filter: -9.255963e+061 result=40 15:36:23 Get A/D value=-858993460 result=40 15:36:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:23 Parameters OK 15:36:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:23 Set A/D data flow result=40 15:36:23 Set A/D channel type result=40 15:36:23 Set A/D encoding result=40 15:36:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:23 Set channel filter=0.000000e+000 result=40 15:36:23 Config A/D Result=40 15:36:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:23 Get A/D filter: -9.255963e+061 result=40 15:36:23 Get A/D value=-858993460 result=40 15:36:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:36:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:36:23 Aux= 15:36:23 Message to Camera, serial 147113 queued 15:37:00 Received message from Master: op=PointingHead serial=147126 15:37:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:37:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:37:00 Point started: ret=0 15:37:00 point_skyscan result=0 15:37:01 Check angles 15:37:01 SkyScan query 15:37:01 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.84<-13456 Statuses=0009 0009 15:37:01 Msec=0 True Az=152.955 Ze=-21.84 Az status=0009 Ze status=0009 15:37:02 Check angles 15:37:02 SkyScan query 15:37:02 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.855<-12057 Statuses=0009 0009 15:37:02 Msec=750 True Az=135.675 Ze=-0.855 Az status=0009 Ze status=0009 15:37:02 Check angles 15:37:02 SkyScan query 15:37:03 SkyScan query done: ret=0 az=117.615<-7841 ze=20.565<-10629 Statuses=0009 0009 15:37:03 Msec=1500 True Az=117.615 Ze=20.565 Az status=0009 Ze status=0009 15:37:03 Check angles 15:37:03 SkyScan query 15:37:04 SkyScan query done: ret=0 az=100.38<-6692 ze=41.52<-9232 Statuses=0009 0009 15:37:04 Msec=2250 True Az=100.38 Ze=41.52 Az status=0009 Ze status=0009 15:37:04 Check angles 15:37:04 SkyScan query 15:37:04 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:37:04 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:37:05 Check angles 15:37:05 SkyScan query 15:37:05 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 15:37:05 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 15:37:05 Message to Master queued w/err=0: serial=147126 error=0 15:37:10 Received message from Master: op=Filter serial=147127 15:37:10 Color wheel filter change from 0 to 0 15:37:10 FLIGetFilterPos err=0 currentPosition=0 15:37:10 FLIGetStepsRemaining err=0 RemainingSteps=0 15:37:10 Filter is already there-color wheel unchanged 15:37:10 Received message from Master: op=Shutter serial=147128 15:37:10 Shutter LASER close 15:37:10 Received message from Camera: op=State serial=147130 15:37:10 GetSingleValue result=40 Value=cccccccc 15:37:10 SkyScan query 15:37:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:37:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:11 Parameters OK 15:37:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:11 Set A/D data flow result=40 15:37:11 Set A/D channel type result=40 15:37:11 Set A/D encoding result=40 15:37:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:11 Set channel filter=0.000000e+000 result=40 15:37:11 Config A/D Result=40 15:37:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:11 Get A/D filter: -9.255963e+061 result=40 15:37:11 Get A/D value=-858993460 result=40 15:37:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:11 Parameters OK 15:37:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:11 Set A/D data flow result=40 15:37:11 Set A/D channel type result=40 15:37:11 Set A/D encoding result=40 15:37:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:11 Set channel filter=0.000000e+000 result=40 15:37:11 Config A/D Result=40 15:37:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:11 Get A/D filter: -9.255963e+061 result=40 15:37:11 Get A/D value=-858993460 result=40 15:37:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:37:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:37:11 Aux= 15:37:11 Message to Camera, serial 147130 queued 15:37:48 Received message from Master: op=PointingHead serial=147143 15:37:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:37:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:37:48 Point started: ret=0 15:37:48 point_skyscan result=0 15:37:49 Check angles 15:37:49 SkyScan query 15:37:49 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 15:37:49 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 15:37:50 Check angles 15:37:50 SkyScan query 15:37:50 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 15:37:50 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 15:37:50 Check angles 15:37:50 SkyScan query 15:37:51 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 15:37:51 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 15:37:51 Check angles 15:37:51 SkyScan query 15:37:52 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 15:37:52 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 15:37:52 Check angles 15:37:52 SkyScan query 15:37:52 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:37:52 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:37:53 Check angles 15:37:53 SkyScan query 15:37:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:37:53 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:37:53 Message to Master queued w/err=0: serial=147143 error=0 15:37:58 Received message from Master: op=Filter serial=147144 15:37:58 Color wheel filter change from 0 to 0 15:37:58 FLIGetFilterPos err=0 currentPosition=0 15:37:58 FLIGetStepsRemaining err=0 RemainingSteps=0 15:37:58 Filter is already there-color wheel unchanged 15:37:58 Received message from Master: op=Shutter serial=147145 15:37:58 Shutter LASER close 15:37:58 Received message from Camera: op=State serial=147147 15:37:58 GetSingleValue result=40 Value=cccccccc 15:37:58 SkyScan query 15:37:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:37:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:59 Parameters OK 15:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:59 Set A/D data flow result=40 15:37:59 Set A/D channel type result=40 15:37:59 Set A/D encoding result=40 15:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:59 Set channel filter=0.000000e+000 result=40 15:37:59 Config A/D Result=40 15:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:59 Get A/D filter: -9.255963e+061 result=40 15:37:59 Get A/D value=-858993460 result=40 15:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:59 Parameters OK 15:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:59 Set A/D data flow result=40 15:37:59 Set A/D channel type result=40 15:37:59 Set A/D encoding result=40 15:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:59 Set channel filter=0.000000e+000 result=40 15:37:59 Config A/D Result=40 15:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:59 Get A/D filter: -9.255963e+061 result=40 15:37:59 Get A/D value=-858993460 result=40 15:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:37:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:37:59 Aux= 15:37:59 Message to Camera, serial 147147 queued 15:38:36 Received message from Master: op=PointingHead serial=147160 15:38:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:38:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:38:36 Point started: ret=0 15:38:36 point_skyscan result=0 15:38:37 Check angles 15:38:37 SkyScan query 15:38:38 SkyScan query done: ret=0 az=152.745<-10183 ze=8.34<-11444 Statuses=0009 0009 15:38:38 Msec=0 True Az=152.745 Ze=8.34 Az status=0009 Ze status=0009 15:38:38 Check angles 15:38:38 SkyScan query 15:38:38 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.555<-12837 Statuses=0009 0009 15:38:38 Msec=750 True Az=135.285 Ze=-12.555 Az status=0009 Ze status=0009 15:38:38 Check angles 15:38:38 SkyScan query 15:38:39 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.54<-14236 Statuses=0009 0009 15:38:39 Msec=1500 True Az=117.795 Ze=-33.54 Az status=0009 Ze status=0009 15:38:39 Check angles 15:38:39 SkyScan query 15:38:40 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.57<-15438 Statuses=0009 0009 15:38:40 Msec=2250 True Az=100.41 Ze=-51.57 Az status=0009 Ze status=0009 15:38:40 Check angles 15:38:40 SkyScan query 15:38:41 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 15:38:41 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 15:38:41 Check angles 15:38:41 SkyScan query 15:38:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:38:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:38:41 Message to Master queued w/err=0: serial=147160 error=0 15:38:46 Received message from Master: op=Filter serial=147161 15:38:46 Color wheel filter change from 0 to 0 15:38:46 FLIGetFilterPos err=0 currentPosition=0 15:38:46 FLIGetStepsRemaining err=0 RemainingSteps=0 15:38:46 Filter is already there-color wheel unchanged 15:38:46 Received message from Master: op=Shutter serial=147162 15:38:46 Shutter LASER close 15:38:47 Received message from Camera: op=State serial=147164 15:38:47 GetSingleValue result=40 Value=cccccccc 15:38:47 SkyScan query 15:38:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:38:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:47 Parameters OK 15:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:47 Set A/D data flow result=40 15:38:47 Set A/D channel type result=40 15:38:47 Set A/D encoding result=40 15:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:47 Set channel filter=0.000000e+000 result=40 15:38:47 Config A/D Result=40 15:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:47 Get A/D filter: -9.255963e+061 result=40 15:38:47 Get A/D value=-858993460 result=40 15:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:47 Parameters OK 15:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:47 Set A/D data flow result=40 15:38:47 Set A/D channel type result=40 15:38:47 Set A/D encoding result=40 15:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:47 Set channel filter=0.000000e+000 result=40 15:38:47 Config A/D Result=40 15:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:47 Get A/D filter: -9.255963e+061 result=40 15:38:47 Get A/D value=-858993460 result=40 15:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:38:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:38:47 Aux= 15:38:47 Message to Camera, serial 147164 queued 15:39:24 Received message from Master: op=PointingHead serial=147177 15:39:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:39:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:39:24 Point started: ret=0 15:39:24 point_skyscan result=0 15:39:25 Check angles 15:39:25 SkyScan query 15:39:26 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.465<-17431 Statuses=0009 0009 15:39:26 Msec=0 True Az=109.125 Ze=-81.465 Az status=0009 Ze status=0009 15:39:26 Check angles 15:39:26 SkyScan query 15:39:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 15:39:26 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 15:39:27 Check angles 15:39:27 SkyScan query 15:39:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 15:39:27 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 15:39:27 Check angles 15:39:27 SkyScan query 15:39:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 15:39:28 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 15:39:28 Check angles 15:39:28 SkyScan query 15:39:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.255<-23017 Statuses=0008 0009 15:39:29 Msec=3000 True Az=112.995 Ze=-165.255 Az status=0008 Ze status=0009 15:39:29 Check angles 15:39:29 SkyScan query 15:39:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 15:39:29 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 15:39:29 Message to Master queued w/err=0: serial=147177 error=0 15:39:34 Received message from Master: op=Filter serial=147178 15:39:34 Color wheel filter change from 0 to 0 15:39:34 FLIGetFilterPos err=0 currentPosition=0 15:39:34 FLIGetStepsRemaining err=0 RemainingSteps=0 15:39:34 Filter is already there-color wheel unchanged 15:39:35 Received message from Master: op=Shutter serial=147179 15:39:35 Shutter LASER open 15:39:35 Received message from Camera: op=State serial=147181 15:39:35 GetSingleValue result=40 Value=cccccccc 15:39:35 SkyScan query 15:39:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:39:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:35 Parameters OK 15:39:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:35 Set A/D data flow result=40 15:39:35 Set A/D channel type result=40 15:39:35 Set A/D encoding result=40 15:39:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:35 Set channel filter=0.000000e+000 result=40 15:39:35 Config A/D Result=40 15:39:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:35 Get A/D filter: -9.255963e+061 result=40 15:39:35 Get A/D value=-858993460 result=40 15:39:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:35 Parameters OK 15:39:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:35 Set A/D data flow result=40 15:39:35 Set A/D channel type result=40 15:39:35 Set A/D encoding result=40 15:39:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:35 Set channel filter=0.000000e+000 result=40 15:39:35 Config A/D Result=40 15:39:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:35 Get A/D filter: -9.255963e+061 result=40 15:39:35 Get A/D value=-858993460 result=40 15:39:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:39:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:39:35 Aux= 15:39:35 Message to Camera, serial 147181 queued 15:39:44 Received message from Master: op=Shutter serial=147191 15:39:44 Shutter LASER close 15:39:44 Received message from Master: op=PointingHead serial=147195 15:39:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:39:44 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:39:45 Point started: ret=0 15:39:45 point_skyscan result=0 15:39:45 Check angles 15:39:45 SkyScan query 15:39:46 SkyScan query done: ret=0 az=89.955<-5997 ze=157.41<-1506 Statuses=0009 0009 15:39:46 Msec=0 True Az=89.955 Ze=157.41 Az status=0009 Ze status=0009 15:39:46 Check angles 15:39:46 SkyScan query 15:39:47 SkyScan query done: ret=0 az=72.465<-4831 ze=136.41<-2906 Statuses=0009 0009 15:39:47 Msec=750 True Az=72.465 Ze=136.41 Az status=0009 Ze status=0009 15:39:47 Check angles 15:39:47 SkyScan query 15:39:47 SkyScan query done: ret=0 az=54.675<-3645 ze=115.05<-4330 Statuses=0009 0009 15:39:47 Msec=1500 True Az=54.675 Ze=115.05 Az status=0009 Ze status=0009 15:39:48 Check angles 15:39:48 SkyScan query 15:39:48 SkyScan query done: ret=0 az=40.98<-2732 ze=94.095<-5727 Statuses=0009 0009 15:39:48 Msec=2250 True Az=40.98 Ze=94.095 Az status=0009 Ze status=0009 15:39:48 Check angles 15:39:48 SkyScan query 15:39:49 SkyScan query done: ret=0 az=40.995<-2733 ze=73.11<-7126 Statuses=0008 0009 15:39:49 Msec=3000 True Az=40.995 Ze=73.11 Az status=0008 Ze status=0009 15:39:49 Check angles 15:39:49 SkyScan query 15:39:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 15:39:50 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 15:39:50 Check angles 15:39:50 SkyScan query 15:39:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:39:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:39:50 Message to Master queued w/err=0: serial=147195 error=0 15:39:55 Received message from Master: op=Filter serial=147196 15:39:55 Color wheel filter change from 0 to 0 15:39:55 FLIGetFilterPos err=0 currentPosition=0 15:39:55 FLIGetStepsRemaining err=0 RemainingSteps=0 15:39:55 Filter is already there-color wheel unchanged 15:39:56 Received message from Master: op=Shutter serial=147197 15:39:56 Shutter LASER close 15:39:56 Received message from Camera: op=State serial=147199 15:39:56 GetSingleValue result=40 Value=cccccccc 15:39:56 SkyScan query 15:39:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:39:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:56 Parameters OK 15:39:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:56 Set A/D data flow result=40 15:39:56 Set A/D channel type result=40 15:39:56 Set A/D encoding result=40 15:39:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:56 Set channel filter=0.000000e+000 result=40 15:39:56 Config A/D Result=40 15:39:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:56 Get A/D filter: -9.255963e+061 result=40 15:39:56 Get A/D value=-858993460 result=40 15:39:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:56 Parameters OK 15:39:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:56 Set A/D data flow result=40 15:39:56 Set A/D channel type result=40 15:39:56 Set A/D encoding result=40 15:39:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:56 Set channel filter=0.000000e+000 result=40 15:39:56 Config A/D Result=40 15:39:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:56 Get A/D filter: -9.255963e+061 result=40 15:39:56 Get A/D value=-858993460 result=40 15:39:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:39:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:39:56 Aux= 15:39:56 Message to Camera, serial 147199 queued 15:40:33 Received message from Master: op=PointingHead serial=147212 15:40:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:40:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:40:34 Point started: ret=0 15:40:34 point_skyscan result=0 15:40:34 Check angles 15:40:34 SkyScan query 15:40:35 SkyScan query done: ret=0 az=63.96<-4264 ze=66.54<-7564 Statuses=0009 0008 15:40:35 Msec=0 True Az=63.96 Ze=66.54 Az status=0009 Ze status=0008 15:40:35 Check angles 15:40:35 SkyScan query 15:40:36 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 15:40:36 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 15:40:36 Check angles 15:40:36 SkyScan query 15:40:36 SkyScan query done: ret=0 az=98.94<-6596 ze=66.495<-7567 Statuses=0009 0008 15:40:36 Msec=1500 True Az=98.94 Ze=66.495 Az status=0009 Ze status=0008 15:40:37 Check angles 15:40:37 SkyScan query 15:40:37 SkyScan query done: ret=0 az=116.415<-7761 ze=66.495<-7567 Statuses=0009 0008 15:40:37 Msec=2250 True Az=116.415 Ze=66.495 Az status=0009 Ze status=0008 15:40:37 Check angles 15:40:37 SkyScan query 15:40:38 SkyScan query done: ret=0 az=133.89<-8926 ze=66.495<-7567 Statuses=0009 0008 15:40:38 Msec=3000 True Az=133.89 Ze=66.495 Az status=0009 Ze status=0008 15:40:38 Check angles 15:40:38 SkyScan query 15:40:39 SkyScan query done: ret=0 az=151.425<-10095 ze=66.495<-7567 Statuses=0009 0008 15:40:39 Msec=3750 True Az=151.425 Ze=66.495 Az status=0009 Ze status=0008 15:40:39 Check angles 15:40:39 SkyScan query 15:40:39 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:40:39 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:40:39 Message to Master queued w/err=0: serial=147212 error=0 15:40:44 Received message from Master: op=Filter serial=147213 15:40:44 Color wheel filter change from 0 to 0 15:40:44 FLIGetFilterPos err=0 currentPosition=0 15:40:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:40:44 Filter is already there-color wheel unchanged 15:40:45 Received message from Master: op=Shutter serial=147214 15:40:45 Shutter LASER close 15:40:45 Received message from Camera: op=State serial=147216 15:40:45 GetSingleValue result=40 Value=cccccccc 15:40:45 SkyScan query 15:40:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:40:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:40:45 Parameters OK 15:40:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:40:45 Set A/D data flow result=40 15:40:45 Set A/D channel type result=40 15:40:45 Set A/D encoding result=40 15:40:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:40:45 Set channel filter=0.000000e+000 result=40 15:40:45 Config A/D Result=40 15:40:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:40:45 Get A/D filter: -9.255963e+061 result=40 15:40:45 Get A/D value=-858993460 result=40 15:40:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:40:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:40:45 Parameters OK 15:40:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:40:45 Set A/D data flow result=40 15:40:45 Set A/D channel type result=40 15:40:45 Set A/D encoding result=40 15:40:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:40:45 Set channel filter=0.000000e+000 result=40 15:40:45 Config A/D Result=40 15:40:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:40:45 Get A/D filter: -9.255963e+061 result=40 15:40:45 Get A/D value=-858993460 result=40 15:40:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:40:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:40:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:40:45 Aux= 15:40:45 Message to Camera, serial 147216 queued 15:41:22 Received message from Master: op=PointingHead serial=147229 15:41:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:41:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:41:22 Point started: ret=0 15:41:22 point_skyscan result=0 15:41:23 Check angles 15:41:23 SkyScan query 15:41:24 SkyScan query done: ret=0 az=134.775<-8985 ze=36.435<-9571 Statuses=0009 0009 15:41:24 Msec=0 True Az=134.775 Ze=36.435 Az status=0009 Ze status=0009 15:41:24 Check angles 15:41:24 SkyScan query 15:41:24 SkyScan query done: ret=0 az=116.955<-7797 ze=15.06<-10996 Statuses=0009 0009 15:41:24 Msec=750 True Az=116.955 Ze=15.06 Az status=0009 Ze status=0009 15:41:25 Check angles 15:41:25 SkyScan query 15:41:25 SkyScan query done: ret=0 az=99.48<-6632 ze=-5.955<-12397 Statuses=0009 0009 15:41:25 Msec=1500 True Az=99.48 Ze=-5.955 Az status=0009 Ze status=0009 15:41:25 Check angles 15:41:25 SkyScan query 15:41:26 SkyScan query done: ret=0 az=82.08<-5472 ze=-26.895<-13793 Statuses=0009 0009 15:41:26 Msec=2250 True Az=82.08 Ze=-26.895 Az status=0009 Ze status=0009 15:41:26 Check angles 15:41:26 SkyScan query 15:41:27 SkyScan query done: ret=0 az=64.14<-4276 ze=-38.58<-14572 Statuses=0009 0008 15:41:27 Msec=3000 True Az=64.14 Ze=-38.58 Az status=0009 Ze status=0008 15:41:27 Check angles 15:41:27 SkyScan query 15:41:27 SkyScan query done: ret=0 az=46.38<-3092 ze=-38.52<-14568 Statuses=0009 0008 15:41:27 Msec=3750 True Az=46.38 Ze=-38.52 Az status=0009 Ze status=0008 15:41:28 Check angles 15:41:28 SkyScan query 15:41:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:41:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:41:28 Message to Master queued w/err=0: serial=147229 error=0 15:41:33 Received message from Master: op=Filter serial=147230 15:41:33 Color wheel filter change from 0 to 0 15:41:33 FLIGetFilterPos err=0 currentPosition=0 15:41:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:41:33 Filter is already there-color wheel unchanged 15:41:33 Received message from Master: op=Shutter serial=147231 15:41:33 Shutter LASER close 15:41:33 Received message from Camera: op=State serial=147233 15:41:33 GetSingleValue result=40 Value=cccccccc 15:41:33 SkyScan query 15:41:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:41:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:34 Parameters OK 15:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:34 Set A/D data flow result=40 15:41:34 Set A/D channel type result=40 15:41:34 Set A/D encoding result=40 15:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:34 Set channel filter=0.000000e+000 result=40 15:41:34 Config A/D Result=40 15:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:34 Get A/D filter: -9.255963e+061 result=40 15:41:34 Get A/D value=-858993460 result=40 15:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:34 Parameters OK 15:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:34 Set A/D data flow result=40 15:41:34 Set A/D channel type result=40 15:41:34 Set A/D encoding result=40 15:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:34 Set channel filter=0.000000e+000 result=40 15:41:34 Config A/D Result=40 15:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:34 Get A/D filter: -9.255963e+061 result=40 15:41:34 Get A/D value=-858993460 result=40 15:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:41:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:41:34 Aux= 15:41:34 Message to Camera, serial 147233 queued 15:42:11 Received message from Master: op=PointingHead serial=147246 15:42:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:42:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:42:11 Point started: ret=0 15:42:11 point_skyscan result=0 15:42:12 Check angles 15:42:12 SkyScan query 15:42:13 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.7<-16580 Statuses=0009 0009 15:42:13 Msec=0 True Az=64.29 Ze=-68.7 Az status=0009 Ze status=0009 15:42:13 Check angles 15:42:13 SkyScan query 15:42:13 SkyScan query done: ret=0 az=81.78<-5452 ze=-89.655<-17977 Statuses=0009 0009 15:42:13 Msec=750 True Az=81.78 Ze=-89.655 Az status=0009 Ze status=0009 15:42:13 Check angles 15:42:13 SkyScan query 15:42:14 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.625<-19375 Statuses=0009 0009 15:42:14 Msec=1500 True Az=99.18 Ze=-110.625 Az status=0009 Ze status=0009 15:42:14 Check angles 15:42:14 SkyScan query 15:42:15 SkyScan query done: ret=0 az=116.685<-7779 ze=-131.505<-20767 Statuses=0009 0009 15:42:15 Msec=2250 True Az=116.685 Ze=-131.505 Az status=0009 Ze status=0009 15:42:15 Check angles 15:42:15 SkyScan query 15:42:16 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 15:42:16 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 15:42:16 Check angles 15:42:16 SkyScan query 15:42:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 15:42:16 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 15:42:16 Message to Master queued w/err=0: serial=147246 error=0 15:42:21 Received message from Master: op=Filter serial=147247 15:42:21 Color wheel filter change from 0 to 0 15:42:21 FLIGetFilterPos err=0 currentPosition=0 15:42:21 FLIGetStepsRemaining err=0 RemainingSteps=0 15:42:21 Filter is already there-color wheel unchanged 15:42:21 Received message from Master: op=Shutter serial=147248 15:42:21 Shutter LASER close 15:42:22 Received message from Camera: op=State serial=147250 15:42:22 GetSingleValue result=40 Value=cccccccc 15:42:22 SkyScan query 15:42:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:42:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:22 Parameters OK 15:42:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:22 Set A/D data flow result=40 15:42:22 Set A/D channel type result=40 15:42:22 Set A/D encoding result=40 15:42:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:22 Set channel filter=0.000000e+000 result=40 15:42:22 Config A/D Result=40 15:42:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:22 Get A/D filter: -9.255963e+061 result=40 15:42:22 Get A/D value=-858993460 result=40 15:42:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:22 Parameters OK 15:42:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:22 Set A/D data flow result=40 15:42:22 Set A/D channel type result=40 15:42:22 Set A/D encoding result=40 15:42:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:22 Set channel filter=0.000000e+000 result=40 15:42:22 Config A/D Result=40 15:42:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:22 Get A/D filter: -9.255963e+061 result=40 15:42:22 Get A/D value=-858993460 result=40 15:42:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:42:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:42:22 Aux= 15:42:22 Message to Camera, serial 147250 queued 15:42:59 Received message from Master: op=PointingHead serial=147263 15:42:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:42:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:42:59 Point started: ret=0 15:42:59 point_skyscan result=0 15:43:00 Check angles 15:43:00 SkyScan query 15:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0009 0009 15:43:01 Msec=0 True Az=112.995 Ze=-171.18 Az status=0009 Ze status=0009 15:43:01 Check angles 15:43:01 SkyScan query 15:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:43:01 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:43:01 Message to Master queued w/err=0: serial=147263 error=0 15:43:06 Received message from Master: op=Filter serial=147264 15:43:06 Color wheel filter change from 0 to 0 15:43:06 FLIGetFilterPos err=0 currentPosition=0 15:43:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:43:06 Filter is already there-color wheel unchanged 15:43:07 Received message from Master: op=Shutter serial=147265 15:43:07 Shutter LASER open 15:43:07 Received message from Camera: op=State serial=147267 15:43:07 GetSingleValue result=40 Value=cccccccc 15:43:07 SkyScan query 15:43:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:43:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:07 Parameters OK 15:43:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:07 Set A/D data flow result=40 15:43:07 Set A/D channel type result=40 15:43:07 Set A/D encoding result=40 15:43:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:07 Set channel filter=0.000000e+000 result=40 15:43:07 Config A/D Result=40 15:43:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:07 Get A/D filter: -9.255963e+061 result=40 15:43:07 Get A/D value=-858993460 result=40 15:43:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:07 Parameters OK 15:43:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:07 Set A/D data flow result=40 15:43:07 Set A/D channel type result=40 15:43:07 Set A/D encoding result=40 15:43:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:07 Set channel filter=0.000000e+000 result=40 15:43:07 Config A/D Result=40 15:43:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:07 Get A/D filter: -9.255963e+061 result=40 15:43:07 Get A/D value=-858993460 result=40 15:43:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:43:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:43:07 Aux= 15:43:07 Message to Camera, serial 147267 queued 15:43:16 Received message from Master: op=Shutter serial=147277 15:43:16 Shutter LASER close 15:43:16 Received message from Master: op=PointingHead serial=147281 15:43:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:43:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:43:17 Point started: ret=0 15:43:17 point_skyscan result=0 15:43:17 Check angles 15:43:17 SkyScan query 15:43:18 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.16<-21544 Statuses=0009 0009 15:43:18 Msec=0 True Az=136.155 Ze=-143.16 Az status=0009 Ze status=0009 15:43:18 Check angles 15:43:18 SkyScan query 15:43:19 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.16<-20144 Statuses=0009 0009 15:43:19 Msec=750 True Az=153.585 Ze=-122.16 Az status=0009 Ze status=0009 15:43:19 Check angles 15:43:19 SkyScan query 15:43:20 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.25<-18750 Statuses=0009 0009 15:43:20 Msec=1500 True Az=171.09 Ze=-101.25 Az status=0009 Ze status=0009 15:43:20 Check angles 15:43:20 SkyScan query 15:43:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.295<-17353 Statuses=0008 0009 15:43:20 Msec=2250 True Az=176.01 Ze=-80.295 Az status=0008 Ze status=0009 15:43:20 Check angles 15:43:20 SkyScan query 15:43:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.31<-15954 Statuses=0008 0009 15:43:21 Msec=3000 True Az=175.995 Ze=-59.31 Az status=0008 Ze status=0009 15:43:21 Check angles 15:43:21 SkyScan query 15:43:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:43:22 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:43:22 Message to Master queued w/err=0: serial=147281 error=0 15:43:27 Received message from Master: op=Filter serial=147282 15:43:27 Color wheel filter change from 0 to 0 15:43:27 FLIGetFilterPos err=0 currentPosition=0 15:43:27 FLIGetStepsRemaining err=0 RemainingSteps=0 15:43:27 Filter is already there-color wheel unchanged 15:43:27 Received message from Master: op=Shutter serial=147283 15:43:27 Shutter LASER close 15:43:27 Received message from Camera: op=State serial=147285 15:43:27 GetSingleValue result=40 Value=cccccccc 15:43:27 SkyScan query 15:43:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:43:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:28 Parameters OK 15:43:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:28 Set A/D data flow result=40 15:43:28 Set A/D channel type result=40 15:43:28 Set A/D encoding result=40 15:43:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:28 Set channel filter=0.000000e+000 result=40 15:43:28 Config A/D Result=40 15:43:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:28 Get A/D filter: -9.255963e+061 result=40 15:43:28 Get A/D value=-858993460 result=40 15:43:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:28 Parameters OK 15:43:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:28 Set A/D data flow result=40 15:43:28 Set A/D channel type result=40 15:43:28 Set A/D encoding result=40 15:43:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:28 Set channel filter=0.000000e+000 result=40 15:43:28 Config A/D Result=40 15:43:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:28 Get A/D filter: -9.255963e+061 result=40 15:43:28 Get A/D value=-858993460 result=40 15:43:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:43:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:43:28 Aux= 15:43:28 Message to Camera, serial 147285 queued 15:44:05 Received message from Master: op=PointingHead serial=147298 15:44:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:44:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:44:05 Point started: ret=0 15:44:05 point_skyscan result=0 15:44:06 Check angles 15:44:06 SkyScan query 15:44:06 SkyScan query done: ret=0 az=153.15<-10210 ze=-21.945<-13463 Statuses=0009 0009 15:44:06 Msec=0 True Az=153.15 Ze=-21.945 Az status=0009 Ze status=0009 15:44:06 Check angles 15:44:06 SkyScan query 15:44:07 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.525<-12035 Statuses=0009 0009 15:44:07 Msec=750 True Az=135.315 Ze=-0.525 Az status=0009 Ze status=0009 15:44:07 Check angles 15:44:07 SkyScan query 15:44:08 SkyScan query done: ret=0 az=117.78<-7852 ze=20.445<-10637 Statuses=0009 0009 15:44:08 Msec=1500 True Az=117.78 Ze=20.445 Az status=0009 Ze status=0009 15:44:08 Check angles 15:44:08 SkyScan query 15:44:09 SkyScan query done: ret=0 az=100.41<-6694 ze=41.4<-9240 Statuses=0009 0009 15:44:09 Msec=2250 True Az=100.41 Ze=41.4 Az status=0009 Ze status=0009 15:44:09 Check angles 15:44:09 SkyScan query 15:44:09 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:44:09 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:44:09 Check angles 15:44:09 SkyScan query 15:44:10 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 15:44:10 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 15:44:10 Message to Master queued w/err=0: serial=147298 error=0 15:44:15 Received message from Master: op=Filter serial=147299 15:44:15 Color wheel filter change from 0 to 0 15:44:15 FLIGetFilterPos err=0 currentPosition=0 15:44:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:44:15 Filter is already there-color wheel unchanged 15:44:15 Received message from Master: op=Shutter serial=147300 15:44:15 Shutter LASER close 15:44:15 Received message from Camera: op=State serial=147302 15:44:15 GetSingleValue result=40 Value=cccccccc 15:44:15 SkyScan query 15:44:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:44:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:16 Parameters OK 15:44:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:16 Set A/D data flow result=40 15:44:16 Set A/D channel type result=40 15:44:16 Set A/D encoding result=40 15:44:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:16 Set channel filter=0.000000e+000 result=40 15:44:16 Config A/D Result=40 15:44:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:16 Get A/D filter: -9.255963e+061 result=40 15:44:16 Get A/D value=-858993460 result=40 15:44:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:16 Parameters OK 15:44:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:16 Set A/D data flow result=40 15:44:16 Set A/D channel type result=40 15:44:16 Set A/D encoding result=40 15:44:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:16 Set channel filter=0.000000e+000 result=40 15:44:16 Config A/D Result=40 15:44:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:16 Get A/D filter: -9.255963e+061 result=40 15:44:16 Get A/D value=-858993460 result=40 15:44:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:44:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:44:16 Aux= 15:44:16 Message to Camera, serial 147302 queued 15:44:53 Received message from Master: op=PointingHead serial=147315 15:44:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:44:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:44:53 Point started: ret=0 15:44:53 point_skyscan result=0 15:44:54 Check angles 15:44:54 SkyScan query 15:44:54 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 15:44:54 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 15:44:54 Check angles 15:44:54 SkyScan query 15:44:55 SkyScan query done: ret=0 az=126.78<-8452 ze=38.505<-9433 Statuses=0009 0008 15:44:55 Msec=750 True Az=126.78 Ze=38.505 Az status=0009 Ze status=0008 15:44:55 Check angles 15:44:55 SkyScan query 15:44:56 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 15:44:56 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 15:44:56 Check angles 15:44:56 SkyScan query 15:44:57 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 15:44:57 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 15:44:57 Check angles 15:44:57 SkyScan query 15:44:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:44:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:44:58 Check angles 15:44:58 SkyScan query 15:44:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:44:58 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:44:58 Message to Master queued w/err=0: serial=147315 error=0 15:45:03 Received message from Master: op=Filter serial=147316 15:45:03 Color wheel filter change from 0 to 0 15:45:03 FLIGetFilterPos err=0 currentPosition=0 15:45:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:45:03 Filter is already there-color wheel unchanged 15:45:03 Received message from Master: op=Shutter serial=147317 15:45:03 Shutter LASER close 15:45:03 Received message from Camera: op=State serial=147319 15:45:03 GetSingleValue result=40 Value=cccccccc 15:45:03 SkyScan query 15:45:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:45:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:04 Parameters OK 15:45:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:04 Set A/D data flow result=40 15:45:04 Set A/D channel type result=40 15:45:04 Set A/D encoding result=40 15:45:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:04 Set channel filter=0.000000e+000 result=40 15:45:04 Config A/D Result=40 15:45:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:04 Get A/D filter: -9.255963e+061 result=40 15:45:04 Get A/D value=-858993460 result=40 15:45:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:04 Parameters OK 15:45:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:04 Set A/D data flow result=40 15:45:04 Set A/D channel type result=40 15:45:04 Set A/D encoding result=40 15:45:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:04 Set channel filter=0.000000e+000 result=40 15:45:04 Config A/D Result=40 15:45:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:04 Get A/D filter: -9.255963e+061 result=40 15:45:04 Get A/D value=-858993460 result=40 15:45:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:45:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:45:04 Aux= 15:45:04 Message to Camera, serial 147319 queued 15:45:27 Received message from Master: op=Identify serial=147320 15:45:41 Received message from Master: op=PointingHead serial=147335 15:45:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:45:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:45:41 Point started: ret=0 15:45:41 point_skyscan result=0 15:45:42 Check angles 15:45:42 SkyScan query 15:45:42 SkyScan query done: ret=0 az=153.135<-10209 ze=8.865<-11409 Statuses=0009 0009 15:45:42 Msec=0 True Az=153.135 Ze=8.865 Az status=0009 Ze status=0009 15:45:43 Check angles 15:45:43 SkyScan query 15:45:43 SkyScan query done: ret=0 az=135.675<-9045 ze=-12.165<-12811 Statuses=0009 0009 15:45:43 Msec=750 True Az=135.675 Ze=-12.165 Az status=0009 Ze status=0009 15:45:43 Check angles 15:45:43 SkyScan query 15:45:44 SkyScan query done: ret=0 az=118.155<-7877 ze=-33.06<-14204 Statuses=0009 0009 15:45:44 Msec=1500 True Az=118.155 Ze=-33.06 Az status=0009 Ze status=0009 15:45:44 Check angles [UTC 2018-12-14 15:45:44] 15:45:44 SkyScan query 15:45:45 SkyScan query done: ret=0 az=99.255<-6617 ze=-51.585<-15439 Statuses=0009 0009 15:45:45 Msec=2250 True Az=99.255 Ze=-51.585 Az status=0009 Ze status=0009 15:45:45 Check angles 15:45:45 SkyScan query 15:45:45 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 15:45:45 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 15:45:46 Check angles 15:45:46 SkyScan query 15:45:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:45:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:45:46 Message to Master queued w/err=0: serial=147335 error=0 15:45:51 Received message from Master: op=Filter serial=147336 15:45:51 Color wheel filter change from 0 to 0 15:45:51 FLIGetFilterPos err=0 currentPosition=0 15:45:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:45:51 Filter is already there-color wheel unchanged 15:45:51 Received message from Master: op=Shutter serial=147337 15:45:51 Shutter LASER close 15:45:51 Received message from Camera: op=State serial=147339 15:45:51 GetSingleValue result=40 Value=cccccccc 15:45:51 SkyScan query 15:45:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:45:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:52 Parameters OK 15:45:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:52 Set A/D data flow result=40 15:45:52 Set A/D channel type result=40 15:45:52 Set A/D encoding result=40 15:45:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:52 Set channel filter=0.000000e+000 result=40 15:45:52 Config A/D Result=40 15:45:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:52 Get A/D filter: -9.255963e+061 result=40 15:45:52 Get A/D value=-858993460 result=40 15:45:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:52 Parameters OK 15:45:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:52 Set A/D data flow result=40 15:45:52 Set A/D channel type result=40 15:45:52 Set A/D encoding result=40 15:45:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:52 Set channel filter=0.000000e+000 result=40 15:45:52 Config A/D Result=40 15:45:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:52 Get A/D filter: -9.255963e+061 result=40 15:45:52 Get A/D value=-858993460 result=40 15:45:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:45:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:45:52 Aux= 15:45:52 Message to Camera, serial 147339 queued 15:46:29 Received message from Master: op=PointingHead serial=147352 15:46:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:46:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:46:29 Point started: ret=0 15:46:29 point_skyscan result=0 15:46:30 Check angles 15:46:30 SkyScan query 15:46:30 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.45<-17430 Statuses=0009 0009 15:46:30 Msec=0 True Az=109.125 Ze=-81.45 Az status=0009 Ze status=0009 15:46:31 Check angles 15:46:31 SkyScan query 15:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 15:46:31 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 15:46:31 Check angles 15:46:31 SkyScan query 15:46:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.375<-20225 Statuses=0008 0009 15:46:32 Msec=1500 True Az=112.995 Ze=-123.375 Az status=0008 Ze status=0009 15:46:32 Check angles 15:46:32 SkyScan query 15:46:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 15:46:33 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 15:46:33 Check angles 15:46:33 SkyScan query 15:46:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.255<-23017 Statuses=0008 0009 15:46:33 Msec=3000 True Az=112.995 Ze=-165.255 Az status=0008 Ze status=0009 15:46:34 Check angles 15:46:34 SkyScan query 15:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 15:46:34 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 15:46:34 Message to Master queued w/err=0: serial=147352 error=0 15:46:39 Received message from Master: op=Filter serial=147353 15:46:39 Color wheel filter change from 0 to 0 15:46:39 FLIGetFilterPos err=0 currentPosition=0 15:46:39 FLIGetStepsRemaining err=0 RemainingSteps=0 15:46:39 Filter is already there-color wheel unchanged 15:46:39 Received message from Master: op=Shutter serial=147354 15:46:39 Shutter LASER open 15:46:40 Received message from Camera: op=State serial=147356 15:46:40 GetSingleValue result=40 Value=cccccccc 15:46:40 SkyScan query 15:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:46:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:40 Parameters OK 15:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:40 Set A/D data flow result=40 15:46:40 Set A/D channel type result=40 15:46:40 Set A/D encoding result=40 15:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:40 Set channel filter=0.000000e+000 result=40 15:46:40 Config A/D Result=40 15:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:40 Get A/D filter: -9.255963e+061 result=40 15:46:40 Get A/D value=-858993460 result=40 15:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:40 Parameters OK 15:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:40 Set A/D data flow result=40 15:46:40 Set A/D channel type result=40 15:46:40 Set A/D encoding result=40 15:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:40 Set channel filter=0.000000e+000 result=40 15:46:40 Config A/D Result=40 15:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:40 Get A/D filter: -9.255963e+061 result=40 15:46:40 Get A/D value=-858993460 result=40 15:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:46:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:46:40 Aux= 15:46:40 Message to Camera, serial 147356 queued 15:46:49 Received message from Master: op=Shutter serial=147366 15:46:49 Shutter LASER close 15:46:49 Received message from Master: op=PointingHead serial=147370 15:46:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:46:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:46:49 Point started: ret=0 15:46:49 point_skyscan result=0 15:46:50 Check angles 15:46:50 SkyScan query 15:46:51 SkyScan query done: ret=0 az=89.55<-5970 ze=156.825<-1545 Statuses=0009 0009 15:46:51 Msec=0 True Az=89.55 Ze=156.825 Az status=0009 Ze status=0009 15:46:51 Check angles 15:46:51 SkyScan query 15:46:51 SkyScan query done: ret=0 az=72.03<-4802 ze=135.87<-2942 Statuses=0009 0009 15:46:51 Msec=750 True Az=72.03 Ze=135.87 Az status=0009 Ze status=0009 15:46:52 Check angles 15:46:52 SkyScan query 15:46:52 SkyScan query done: ret=0 az=54.3<-3620 ze=114.42<-4372 Statuses=0009 0009 15:46:52 Msec=1500 True Az=54.3 Ze=114.42 Az status=0009 Ze status=0009 15:46:52 Check angles 15:46:52 SkyScan query 15:46:53 SkyScan query done: ret=0 az=40.95<-2730 ze=93.075<-5795 Statuses=0009 0009 15:46:53 Msec=2250 True Az=40.95 Ze=93.075 Az status=0009 Ze status=0009 15:46:53 Check angles 15:46:53 SkyScan query 15:46:54 SkyScan query done: ret=0 az=40.995<-2733 ze=71.715<-7219 Statuses=0008 0009 15:46:54 Msec=3000 True Az=40.995 Ze=71.715 Az status=0008 Ze status=0009 15:46:54 Check angles 15:46:54 SkyScan query 15:46:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.96<-8536 Statuses=0008 0009 15:46:54 Msec=3750 True Az=40.995 Ze=51.96 Az status=0008 Ze status=0009 15:46:55 Check angles 15:46:55 SkyScan query 15:46:55 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 15:46:55 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 15:46:55 Message to Master queued w/err=0: serial=147370 error=0 15:47:00 Received message from Master: op=Filter serial=147371 15:47:00 Color wheel filter change from 0 to 0 15:47:00 FLIGetFilterPos err=0 currentPosition=0 15:47:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:47:00 Filter is already there-color wheel unchanged 15:47:00 Received message from Master: op=Shutter serial=147372 15:47:00 Shutter LASER close 15:47:01 Received message from Camera: op=State serial=147374 15:47:01 GetSingleValue result=40 Value=cccccccc 15:47:01 SkyScan query 15:47:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:47:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:01 Parameters OK 15:47:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:01 Set A/D data flow result=40 15:47:01 Set A/D channel type result=40 15:47:01 Set A/D encoding result=40 15:47:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:01 Set channel filter=0.000000e+000 result=40 15:47:01 Config A/D Result=40 15:47:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:01 Get A/D filter: -9.255963e+061 result=40 15:47:01 Get A/D value=-858993460 result=40 15:47:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:01 Parameters OK 15:47:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:01 Set A/D data flow result=40 15:47:01 Set A/D channel type result=40 15:47:01 Set A/D encoding result=40 15:47:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:01 Set channel filter=0.000000e+000 result=40 15:47:01 Config A/D Result=40 15:47:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:01 Get A/D filter: -9.255963e+061 result=40 15:47:01 Get A/D value=-858993460 result=40 15:47:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:47:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:47:01 Aux= 15:47:01 Message to Camera, serial 147374 queued 15:47:38 Received message from Master: op=PointingHead serial=147387 15:47:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:47:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:47:38 Point started: ret=0 15:47:38 point_skyscan result=0 15:47:39 Check angles 15:47:39 SkyScan query 15:47:40 SkyScan query done: ret=0 az=64.23<-4282 ze=66.54<-7564 Statuses=0009 0008 15:47:40 Msec=0 True Az=64.23 Ze=66.54 Az status=0009 Ze status=0008 15:47:40 Check angles 15:47:40 SkyScan query 15:47:40 SkyScan query done: ret=0 az=82.2<-5480 ze=66.51<-7566 Statuses=0009 0008 15:47:40 Msec=750 True Az=82.2 Ze=66.51 Az status=0009 Ze status=0008 15:47:41 Check angles 15:47:41 SkyScan query 15:47:41 SkyScan query done: ret=0 az=99.555<-6637 ze=66.495<-7567 Statuses=0009 0008 15:47:41 Msec=1500 True Az=99.555 Ze=66.495 Az status=0009 Ze status=0008 15:47:41 Check angles 15:47:41 SkyScan query 15:47:42 SkyScan query done: ret=0 az=117.105<-7807 ze=66.495<-7567 Statuses=0009 0008 15:47:42 Msec=2250 True Az=117.105 Ze=66.495 Az status=0009 Ze status=0008 15:47:42 Check angles 15:47:42 SkyScan query 15:47:43 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 15:47:43 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 15:47:43 Check angles 15:47:43 SkyScan query 15:47:43 SkyScan query done: ret=0 az=151.95<-10130 ze=66.495<-7567 Statuses=0009 0008 15:47:43 Msec=3750 True Az=151.95 Ze=66.495 Az status=0009 Ze status=0008 15:47:44 Check angles 15:47:44 SkyScan query 15:47:44 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:47:44 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:47:44 Message to Master queued w/err=0: serial=147387 error=0 15:47:49 Received message from Master: op=Filter serial=147388 15:47:49 Color wheel filter change from 0 to 0 15:47:49 FLIGetFilterPos err=0 currentPosition=0 15:47:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:47:49 Filter is already there-color wheel unchanged 15:47:49 Received message from Master: op=Shutter serial=147389 15:47:49 Shutter LASER close 15:47:49 Received message from Camera: op=State serial=147391 15:47:49 GetSingleValue result=40 Value=cccccccc 15:47:49 SkyScan query 15:47:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:47:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:50 Parameters OK 15:47:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:50 Set A/D data flow result=40 15:47:50 Set A/D channel type result=40 15:47:50 Set A/D encoding result=40 15:47:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:50 Set channel filter=0.000000e+000 result=40 15:47:50 Config A/D Result=40 15:47:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:50 Get A/D filter: -9.255963e+061 result=40 15:47:50 Get A/D value=-858993460 result=40 15:47:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:50 Parameters OK 15:47:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:50 Set A/D data flow result=40 15:47:50 Set A/D channel type result=40 15:47:50 Set A/D encoding result=40 15:47:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:50 Set channel filter=0.000000e+000 result=40 15:47:50 Config A/D Result=40 15:47:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:50 Get A/D filter: -9.255963e+061 result=40 15:47:50 Get A/D value=-858993460 result=40 15:47:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:47:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:47:50 Aux= 15:47:50 Message to Camera, serial 147391 queued 15:48:27 Received message from Master: op=PointingHead serial=147404 15:48:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:48:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:48:27 Point started: ret=0 15:48:27 point_skyscan result=0 15:48:28 Check angles 15:48:28 SkyScan query 15:48:28 SkyScan query done: ret=0 az=134.745<-8983 ze=36.435<-9571 Statuses=0009 0009 15:48:28 Msec=0 True Az=134.745 Ze=36.435 Az status=0009 Ze status=0009 15:48:29 Check angles 15:48:29 SkyScan query 15:48:29 SkyScan query done: ret=0 az=117.255<-7817 ze=15.525<-10965 Statuses=0009 0009 15:48:29 Msec=750 True Az=117.255 Ze=15.525 Az status=0009 Ze status=0009 15:48:29 Check angles 15:48:29 SkyScan query 15:48:30 SkyScan query done: ret=0 az=99.495<-6633 ze=-6.015<-12401 Statuses=0009 0009 15:48:30 Msec=1500 True Az=99.495 Ze=-6.015 Az status=0009 Ze status=0009 15:48:30 Check angles 15:48:30 SkyScan query 15:48:31 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.955<-13797 Statuses=0009 0009 15:48:31 Msec=2250 True Az=82.035 Ze=-26.955 Az status=0009 Ze status=0009 15:48:31 Check angles 15:48:31 SkyScan query 15:48:31 SkyScan query done: ret=0 az=64.53<-4302 ze=-38.595<-14573 Statuses=0009 0008 15:48:31 Msec=3000 True Az=64.53 Ze=-38.595 Az status=0009 Ze status=0008 15:48:32 Check angles 15:48:32 SkyScan query 15:48:32 SkyScan query done: ret=0 az=47.01<-3134 ze=-38.52<-14568 Statuses=0009 0008 15:48:32 Msec=3750 True Az=47.01 Ze=-38.52 Az status=0009 Ze status=0008 15:48:32 Check angles 15:48:32 SkyScan query 15:48:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:48:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:48:33 Message to Master queued w/err=0: serial=147404 error=0 15:48:38 Received message from Master: op=Filter serial=147405 15:48:38 Color wheel filter change from 0 to 0 15:48:38 FLIGetFilterPos err=0 currentPosition=0 15:48:38 FLIGetStepsRemaining err=0 RemainingSteps=0 15:48:38 Filter is already there-color wheel unchanged 15:48:38 Received message from Master: op=Shutter serial=147406 15:48:38 Shutter LASER close 15:48:38 Received message from Camera: op=State serial=147408 15:48:38 GetSingleValue result=40 Value=cccccccc 15:48:38 SkyScan query 15:48:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:48:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:39 Parameters OK 15:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:39 Set A/D data flow result=40 15:48:39 Set A/D channel type result=40 15:48:39 Set A/D encoding result=40 15:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:39 Set channel filter=0.000000e+000 result=40 15:48:39 Config A/D Result=40 15:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:39 Get A/D filter: -9.255963e+061 result=40 15:48:39 Get A/D value=-858993460 result=40 15:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:39 Parameters OK 15:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:39 Set A/D data flow result=40 15:48:39 Set A/D channel type result=40 15:48:39 Set A/D encoding result=40 15:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:39 Set channel filter=0.000000e+000 result=40 15:48:39 Config A/D Result=40 15:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:39 Get A/D filter: -9.255963e+061 result=40 15:48:39 Get A/D value=-858993460 result=40 15:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:48:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:48:39 Aux= 15:48:39 Message to Camera, serial 147408 queued 15:49:15 Received message from Master: op=PointingHead serial=147420 15:49:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:49:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:49:15 Point started: ret=0 15:49:15 point_skyscan result=0 15:49:16 Check angles 15:49:16 SkyScan query 15:49:16 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.22<-16548 Statuses=0009 0009 15:49:16 Msec=0 True Az=63.84 Ze=-68.22 Az status=0009 Ze status=0009 15:49:17 Check angles 15:49:17 SkyScan query 15:49:17 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.205<-17947 Statuses=0009 0009 15:49:17 Msec=750 True Az=81.36 Ze=-89.205 Az status=0009 Ze status=0009 15:49:17 Check angles 15:49:17 SkyScan query 15:49:18 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.61<-19374 Statuses=0009 0009 15:49:18 Msec=1500 True Az=99.195 Ze=-110.61 Az status=0009 Ze status=0009 15:49:18 Check angles 15:49:18 SkyScan query 15:49:19 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.49<-20766 Statuses=0009 0009 15:49:19 Msec=2250 True Az=116.64 Ze=-131.49 Az status=0009 Ze status=0009 15:49:19 Check angles 15:49:19 SkyScan query 15:49:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 15:49:19 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 15:49:20 Check angles 15:49:20 SkyScan query 15:49:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 15:49:20 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 15:49:20 Message to Master queued w/err=0: serial=147420 error=0 15:49:25 Received message from Master: op=Filter serial=147421 15:49:25 Color wheel filter change from 0 to 0 15:49:25 FLIGetFilterPos err=0 currentPosition=0 15:49:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:49:25 Filter is already there-color wheel unchanged 15:49:25 Received message from Master: op=Shutter serial=147422 15:49:25 Shutter LASER close 15:49:25 Received message from Camera: op=State serial=147424 15:49:25 GetSingleValue result=40 Value=cccccccc 15:49:25 SkyScan query 15:49:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:49:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:49:26 Parameters OK 15:49:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:49:26 Set A/D data flow result=40 15:49:26 Set A/D channel type result=40 15:49:26 Set A/D encoding result=40 15:49:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:49:26 Set channel filter=0.000000e+000 result=40 15:49:26 Config A/D Result=40 15:49:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:49:26 Get A/D filter: -9.255963e+061 result=40 15:49:26 Get A/D value=-858993460 result=40 15:49:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:49:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:49:26 Parameters OK 15:49:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:49:26 Set A/D data flow result=40 15:49:26 Set A/D channel type result=40 15:49:26 Set A/D encoding result=40 15:49:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:49:26 Set channel filter=0.000000e+000 result=40 15:49:26 Config A/D Result=40 15:49:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:49:26 Get A/D filter: -9.255963e+061 result=40 15:49:26 Get A/D value=-858993460 result=40 15:49:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:49:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:49:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:49:26 Aux= 15:49:26 Message to Camera, serial 147424 queued 15:50:03 Received message from Master: op=PointingHead serial=147437 15:50:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:50:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:50:03 Point started: ret=0 15:50:03 point_skyscan result=0 15:50:04 Check angles 15:50:04 SkyScan query 15:50:04 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 15:50:04 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 15:50:05 Check angles 15:50:05 SkyScan query 15:50:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:50:05 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:50:05 Message to Master queued w/err=0: serial=147437 error=0 15:50:10 Received message from Master: op=Filter serial=147438 15:50:10 Color wheel filter change from 0 to 0 15:50:10 FLIGetFilterPos err=0 currentPosition=0 15:50:10 FLIGetStepsRemaining err=0 RemainingSteps=0 15:50:10 Filter is already there-color wheel unchanged 15:50:10 Received message from Master: op=Shutter serial=147439 15:50:10 Shutter LASER open 15:50:11 Received message from Camera: op=State serial=147441 15:50:11 GetSingleValue result=40 Value=cccccccc 15:50:11 SkyScan query 15:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:50:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:11 Parameters OK 15:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:11 Set A/D data flow result=40 15:50:11 Set A/D channel type result=40 15:50:11 Set A/D encoding result=40 15:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:11 Set channel filter=0.000000e+000 result=40 15:50:11 Config A/D Result=40 15:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:11 Get A/D filter: -9.255963e+061 result=40 15:50:11 Get A/D value=-858993460 result=40 15:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:11 Parameters OK 15:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:11 Set A/D data flow result=40 15:50:11 Set A/D channel type result=40 15:50:11 Set A/D encoding result=40 15:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:11 Set channel filter=0.000000e+000 result=40 15:50:11 Config A/D Result=40 15:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:11 Get A/D filter: -9.255963e+061 result=40 15:50:11 Get A/D value=-858993460 result=40 15:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:50:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:50:11 Aux= 15:50:11 Message to Camera, serial 147441 queued 15:50:20 Received message from Master: op=Shutter serial=147451 15:50:20 Shutter LASER close 15:50:20 Received message from Master: op=PointingHead serial=147455 15:50:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:50:20 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:50:20 Point started: ret=0 15:50:20 point_skyscan result=0 15:50:21 Check angles 15:50:21 SkyScan query 15:50:22 SkyScan query done: ret=0 az=136.44<-9096 ze=-142.74<-21516 Statuses=0009 0009 15:50:22 Msec=0 True Az=136.44 Ze=-142.74 Az status=0009 Ze status=0009 15:50:22 Check angles 15:50:22 SkyScan query 15:50:23 SkyScan query done: ret=0 az=154.32<-10288 ze=-121.32<-20088 Statuses=0009 0009 15:50:23 Msec=750 True Az=154.32 Ze=-121.32 Az status=0009 Ze status=0009 15:50:23 Check angles 15:50:23 SkyScan query 15:50:23 SkyScan query done: ret=0 az=171.765<-11451 ze=-100.29<-18686 Statuses=0009 0009 15:50:23 Msec=1500 True Az=171.765 Ze=-100.29 Az status=0009 Ze status=0009 15:50:23 Check angles 15:50:23 SkyScan query 15:50:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.335<-17289 Statuses=0008 0009 15:50:24 Msec=2250 True Az=176.01 Ze=-79.335 Az status=0008 Ze status=0009 15:50:24 Check angles 15:50:24 SkyScan query 15:50:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.395<-15893 Statuses=0008 0009 15:50:25 Msec=3000 True Az=176.01 Ze=-58.395 Az status=0008 Ze status=0009 15:50:25 Check angles 15:50:25 SkyScan query 15:50:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:50:26 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:50:26 Message to Master queued w/err=0: serial=147455 error=0 15:50:31 Received message from Master: op=Filter serial=147456 15:50:31 Color wheel filter change from 0 to 0 15:50:31 FLIGetFilterPos err=0 currentPosition=0 15:50:31 FLIGetStepsRemaining err=0 RemainingSteps=0 15:50:31 Filter is already there-color wheel unchanged 15:50:31 Received message from Master: op=Shutter serial=147457 15:50:31 Shutter LASER close 15:50:31 Received message from Camera: op=State serial=147459 15:50:31 GetSingleValue result=40 Value=cccccccc 15:50:31 SkyScan query 15:50:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:50:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:31 Parameters OK 15:50:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:31 Set A/D data flow result=40 15:50:31 Set A/D channel type result=40 15:50:31 Set A/D encoding result=40 15:50:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:31 Set channel filter=0.000000e+000 result=40 15:50:31 Config A/D Result=40 15:50:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:31 Get A/D filter: -9.255963e+061 result=40 15:50:31 Get A/D value=-858993460 result=40 15:50:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:31 Parameters OK 15:50:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:31 Set A/D data flow result=40 15:50:31 Set A/D channel type result=40 15:50:31 Set A/D encoding result=40 15:50:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:31 Set channel filter=0.000000e+000 result=40 15:50:31 Config A/D Result=40 15:50:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:31 Get A/D filter: -9.255963e+061 result=40 15:50:31 Get A/D value=-858993460 result=40 15:50:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:50:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:50:31 Aux= 15:50:31 Message to Camera, serial 147459 queued 15:51:08 Received message from Master: op=PointingHead serial=147472 15:51:08 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:51:08 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:51:09 Point started: ret=0 15:51:09 point_skyscan result=0 15:51:09 Check angles 15:51:09 SkyScan query 15:51:10 SkyScan query done: ret=0 az=152.67<-10178 ze=-21.285<-13419 Statuses=0009 0009 15:51:10 Msec=0 True Az=152.67 Ze=-21.285 Az status=0009 Ze status=0009 15:51:10 Check angles 15:51:10 SkyScan query 15:51:11 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.345<-12023 Statuses=0009 0009 15:51:11 Msec=750 True Az=135.135 Ze=-0.345 Az status=0009 Ze status=0009 15:51:11 Check angles 15:51:11 SkyScan query 15:51:11 SkyScan query done: ret=0 az=117.615<-7841 ze=20.64<-10624 Statuses=0009 0009 15:51:11 Msec=1500 True Az=117.615 Ze=20.64 Az status=0009 Ze status=0009 15:51:12 Check angles 15:51:12 SkyScan query 15:51:12 SkyScan query done: ret=0 az=100.245<-6683 ze=41.565<-9229 Statuses=0009 0009 15:51:12 Msec=2250 True Az=100.245 Ze=41.565 Az status=0009 Ze status=0009 15:51:12 Check angles 15:51:12 SkyScan query 15:51:13 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:51:13 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:51:13 Check angles 15:51:13 SkyScan query 15:51:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:51:14 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:51:14 Message to Master queued w/err=0: serial=147472 error=0 15:51:19 Received message from Master: op=Filter serial=147473 15:51:19 Color wheel filter change from 0 to 0 15:51:19 FLIGetFilterPos err=0 currentPosition=0 15:51:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:51:19 Filter is already there-color wheel unchanged 15:51:19 Received message from Master: op=Shutter serial=147474 15:51:19 Shutter LASER close 15:51:19 Received message from Camera: op=State serial=147476 15:51:19 GetSingleValue result=40 Value=cccccccc 15:51:19 SkyScan query 15:51:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:51:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:20 Parameters OK 15:51:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:20 Set A/D data flow result=40 15:51:20 Set A/D channel type result=40 15:51:20 Set A/D encoding result=40 15:51:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:20 Set channel filter=0.000000e+000 result=40 15:51:20 Config A/D Result=40 15:51:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:20 Get A/D filter: -9.255963e+061 result=40 15:51:20 Get A/D value=-858993460 result=40 15:51:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:20 Parameters OK 15:51:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:20 Set A/D data flow result=40 15:51:20 Set A/D channel type result=40 15:51:20 Set A/D encoding result=40 15:51:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:20 Set channel filter=0.000000e+000 result=40 15:51:20 Config A/D Result=40 15:51:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:20 Get A/D filter: -9.255963e+061 result=40 15:51:20 Get A/D value=-858993460 result=40 15:51:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:51:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:51:20 Aux= 15:51:20 Message to Camera, serial 147476 queued 15:51:56 Received message from Master: op=PointingHead serial=147489 15:51:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:51:56 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:51:57 Point started: ret=0 15:51:57 point_skyscan result=0 15:51:57 Check angles 15:51:57 SkyScan query 15:51:58 SkyScan query done: ret=0 az=109.44<-7296 ze=38.49<-9434 Statuses=0009 0008 15:51:58 Msec=0 True Az=109.44 Ze=38.49 Az status=0009 Ze status=0008 15:51:58 Check angles 15:51:58 SkyScan query 15:51:59 SkyScan query done: ret=0 az=127.14<-8476 ze=38.505<-9433 Statuses=0009 0008 15:51:59 Msec=750 True Az=127.14 Ze=38.505 Az status=0009 Ze status=0008 15:51:59 Check angles 15:51:59 SkyScan query 15:52:00 SkyScan query done: ret=0 az=144.705<-9647 ze=38.505<-9433 Statuses=0009 0008 15:52:00 Msec=1500 True Az=144.705 Ze=38.505 Az status=0009 Ze status=0008 15:52:00 Check angles 15:52:00 SkyScan query 15:52:00 SkyScan query done: ret=0 az=162.225<-10815 ze=38.505<-9433 Statuses=0009 0008 15:52:00 Msec=2250 True Az=162.225 Ze=38.505 Az status=0009 Ze status=0008 15:52:00 Check angles 15:52:00 SkyScan query 15:52:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:52:01 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:52:01 Check angles 15:52:01 SkyScan query 15:52:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:52:02 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:52:02 Message to Master queued w/err=0: serial=147489 error=0 15:52:07 Received message from Master: op=Filter serial=147490 15:52:07 Color wheel filter change from 0 to 0 15:52:07 FLIGetFilterPos err=0 currentPosition=0 15:52:07 FLIGetStepsRemaining err=0 RemainingSteps=0 15:52:07 Filter is already there-color wheel unchanged 15:52:07 Received message from Master: op=Shutter serial=147491 15:52:07 Shutter LASER close 15:52:07 Received message from Camera: op=State serial=147493 15:52:07 GetSingleValue result=40 Value=cccccccc 15:52:07 SkyScan query 15:52:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:52:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:08 Parameters OK 15:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:08 Set A/D data flow result=40 15:52:08 Set A/D channel type result=40 15:52:08 Set A/D encoding result=40 15:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:08 Set channel filter=0.000000e+000 result=40 15:52:08 Config A/D Result=40 15:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:08 Get A/D filter: -9.255963e+061 result=40 15:52:08 Get A/D value=-858993460 result=40 15:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:08 Parameters OK 15:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:08 Set A/D data flow result=40 15:52:08 Set A/D channel type result=40 15:52:08 Set A/D encoding result=40 15:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:08 Set channel filter=0.000000e+000 result=40 15:52:08 Config A/D Result=40 15:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:08 Get A/D filter: -9.255963e+061 result=40 15:52:08 Get A/D value=-858993460 result=40 15:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:52:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:52:08 Aux= 15:52:08 Message to Camera, serial 147493 queued 15:52:44 Received message from Master: op=PointingHead serial=147506 15:52:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:52:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:52:45 Point started: ret=0 15:52:45 point_skyscan result=0 15:52:46 Check angles 15:52:46 SkyScan query 15:52:46 SkyScan query done: ret=0 az=152.76<-10184 ze=8.4<-11440 Statuses=0009 0009 15:52:46 Msec=0 True Az=152.76 Ze=8.4 Az status=0009 Ze status=0009 15:52:46 Check angles 15:52:46 SkyScan query 15:52:47 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.51<-12834 Statuses=0009 0009 15:52:47 Msec=750 True Az=135.315 Ze=-12.51 Az status=0009 Ze status=0009 15:52:47 Check angles 15:52:47 SkyScan query 15:52:48 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.525<-14235 Statuses=0009 0009 15:52:48 Msec=1500 True Az=117.825 Ze=-33.525 Az status=0009 Ze status=0009 15:52:48 Check angles 15:52:48 SkyScan query 15:52:48 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.57<-15438 Statuses=0009 0009 15:52:48 Msec=2250 True Az=100.395 Ze=-51.57 Az status=0009 Ze status=0009 15:52:49 Check angles 15:52:49 SkyScan query 15:52:49 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:52:49 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:52:49 Check angles 15:52:49 SkyScan query 15:52:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:52:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:52:50 Message to Master queued w/err=0: serial=147506 error=0 15:52:55 Received message from Master: op=Filter serial=147507 15:52:55 Color wheel filter change from 0 to 0 15:52:55 FLIGetFilterPos err=0 currentPosition=0 15:52:55 FLIGetStepsRemaining err=0 RemainingSteps=0 15:52:55 Filter is already there-color wheel unchanged 15:52:55 Received message from Master: op=Shutter serial=147508 15:52:55 Shutter LASER close 15:52:55 Received message from Camera: op=State serial=147510 15:52:55 GetSingleValue result=40 Value=cccccccc 15:52:55 SkyScan query 15:52:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:52:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:56 Parameters OK 15:52:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:56 Set A/D data flow result=40 15:52:56 Set A/D channel type result=40 15:52:56 Set A/D encoding result=40 15:52:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:56 Set channel filter=0.000000e+000 result=40 15:52:56 Config A/D Result=40 15:52:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:56 Get A/D filter: -9.255963e+061 result=40 15:52:56 Get A/D value=-858993460 result=40 15:52:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:56 Parameters OK 15:52:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:56 Set A/D data flow result=40 15:52:56 Set A/D channel type result=40 15:52:56 Set A/D encoding result=40 15:52:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:56 Set channel filter=0.000000e+000 result=40 15:52:56 Config A/D Result=40 15:52:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:56 Get A/D filter: -9.255963e+061 result=40 15:52:56 Get A/D value=-858993460 result=40 15:52:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:52:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:52:56 Aux= 15:52:56 Message to Camera, serial 147510 queued 15:53:33 Received message from Master: op=PointingHead serial=147523 15:53:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:53:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:53:33 Point started: ret=0 15:53:33 point_skyscan result=0 15:53:34 Check angles 15:53:34 SkyScan query 15:53:34 SkyScan query done: ret=0 az=109.11<-7274 ze=-81.33<-17422 Statuses=0009 0009 15:53:34 Msec=0 True Az=109.11 Ze=-81.33 Az status=0009 Ze status=0009 15:53:34 Check angles 15:53:34 SkyScan query 15:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.315<-18821 Statuses=0008 0009 15:53:35 Msec=750 True Az=112.995 Ze=-102.315 Az status=0008 Ze status=0009 15:53:35 Check angles 15:53:35 SkyScan query 15:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.255<-20217 Statuses=0008 0009 15:53:36 Msec=1500 True Az=112.995 Ze=-123.255 Az status=0008 Ze status=0009 15:53:36 Check angles 15:53:36 SkyScan query 15:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.195<-21613 Statuses=0008 0009 15:53:37 Msec=2250 True Az=112.995 Ze=-144.195 Az status=0008 Ze status=0009 15:53:37 Check angles 15:53:37 SkyScan query 15:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.135<-23009 Statuses=0008 0009 15:53:37 Msec=3000 True Az=112.995 Ze=-165.135 Az status=0008 Ze status=0009 15:53:37 Check angles 15:53:37 SkyScan query 15:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 15:53:38 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 15:53:38 Message to Master queued w/err=0: serial=147523 error=0 15:53:43 Received message from Master: op=Filter serial=147524 15:53:43 Color wheel filter change from 0 to 0 15:53:43 FLIGetFilterPos err=0 currentPosition=0 15:53:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:53:43 Filter is already there-color wheel unchanged 15:53:43 Received message from Master: op=Shutter serial=147525 15:53:43 Shutter LASER open 15:53:43 Received message from Camera: op=State serial=147527 15:53:43 GetSingleValue result=40 Value=cccccccc 15:53:43 SkyScan query 15:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:53:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:44 Parameters OK 15:53:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:44 Set A/D data flow result=40 15:53:44 Set A/D channel type result=40 15:53:44 Set A/D encoding result=40 15:53:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:44 Set channel filter=0.000000e+000 result=40 15:53:44 Config A/D Result=40 15:53:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:44 Get A/D filter: -9.255963e+061 result=40 15:53:44 Get A/D value=-858993460 result=40 15:53:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:44 Parameters OK 15:53:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:44 Set A/D data flow result=40 15:53:44 Set A/D channel type result=40 15:53:44 Set A/D encoding result=40 15:53:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:44 Set channel filter=0.000000e+000 result=40 15:53:44 Config A/D Result=40 15:53:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:44 Get A/D filter: -9.255963e+061 result=40 15:53:44 Get A/D value=-858993460 result=40 15:53:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:53:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:53:44 Aux= 15:53:44 Message to Camera, serial 147527 queued 15:53:52 Received message from Master: op=Shutter serial=147537 15:53:52 Shutter LASER close 15:53:53 Received message from Master: op=PointingHead serial=147541 15:53:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:53:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:53:53 Point started: ret=0 15:53:53 point_skyscan result=0 15:53:54 Check angles 15:53:54 SkyScan query 15:53:54 SkyScan query done: ret=0 az=89.835<-5989 ze=157.23<-1518 Statuses=0009 0009 15:53:54 Msec=0 True Az=89.835 Ze=157.23 Az status=0009 Ze status=0009 15:53:55 Check angles 15:53:55 SkyScan query 15:53:55 SkyScan query done: ret=0 az=72.48<-4832 ze=136.29<-2914 Statuses=0009 0009 15:53:55 Msec=750 True Az=72.48 Ze=136.29 Az status=0009 Ze status=0009 15:53:55 Check angles 15:53:55 SkyScan query 15:53:56 SkyScan query done: ret=0 az=55.005<-3667 ze=115.35<-4310 Statuses=0009 0009 15:53:56 Msec=1500 True Az=55.005 Ze=115.35 Az status=0009 Ze status=0009 15:53:56 Check angles 15:53:56 SkyScan query 15:53:57 SkyScan query done: ret=0 az=41.04<-2736 ze=94.35<-5710 Statuses=0009 0009 15:53:57 Msec=2250 True Az=41.04 Ze=94.35 Az status=0009 Ze status=0009 15:53:57 Check angles 15:53:57 SkyScan query 15:53:57 SkyScan query done: ret=0 az=40.995<-2733 ze=72.93<-7138 Statuses=0008 0009 15:53:57 Msec=3000 True Az=40.995 Ze=72.93 Az status=0008 Ze status=0009 15:53:58 Check angles 15:53:58 SkyScan query 15:53:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 15:53:58 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 15:53:58 Check angles 15:53:58 SkyScan query 15:53:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:53:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:53:59 Message to Master queued w/err=0: serial=147541 error=0 15:54:04 Received message from Master: op=Filter serial=147542 15:54:04 Color wheel filter change from 0 to 0 15:54:04 FLIGetFilterPos err=0 currentPosition=0 15:54:04 FLIGetStepsRemaining err=0 RemainingSteps=0 15:54:04 Filter is already there-color wheel unchanged 15:54:04 Received message from Master: op=Shutter serial=147543 15:54:04 Shutter LASER close 15:54:04 Received message from Camera: op=State serial=147545 15:54:04 GetSingleValue result=40 Value=cccccccc 15:54:04 SkyScan query 15:54:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:54:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:05 Parameters OK 15:54:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:05 Set A/D data flow result=40 15:54:05 Set A/D channel type result=40 15:54:05 Set A/D encoding result=40 15:54:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:05 Set channel filter=0.000000e+000 result=40 15:54:05 Config A/D Result=40 15:54:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:05 Get A/D filter: -9.255963e+061 result=40 15:54:05 Get A/D value=-858993460 result=40 15:54:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:05 Parameters OK 15:54:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:05 Set A/D data flow result=40 15:54:05 Set A/D channel type result=40 15:54:05 Set A/D encoding result=40 15:54:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:05 Set channel filter=0.000000e+000 result=40 15:54:05 Config A/D Result=40 15:54:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:05 Get A/D filter: -9.255963e+061 result=40 15:54:05 Get A/D value=-858993460 result=40 15:54:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:54:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:54:05 Aux= 15:54:05 Message to Camera, serial 147545 queued 15:54:42 Received message from Master: op=PointingHead serial=147558 15:54:42 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:54:42 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:54:42 Point started: ret=0 15:54:42 point_skyscan result=0 15:54:43 Check angles 15:54:43 SkyScan query 15:54:44 SkyScan query done: ret=0 az=63.855<-4257 ze=66.54<-7564 Statuses=0009 0008 15:54:44 Msec=0 True Az=63.855 Ze=66.54 Az status=0009 Ze status=0008 15:54:44 Check angles 15:54:44 SkyScan query 15:54:44 SkyScan query done: ret=0 az=81.435<-5429 ze=66.495<-7567 Statuses=0009 0008 15:54:44 Msec=750 True Az=81.435 Ze=66.495 Az status=0009 Ze status=0008 15:54:44 Check angles 15:54:44 SkyScan query 15:54:45 SkyScan query done: ret=0 az=98.805<-6587 ze=66.495<-7567 Statuses=0009 0008 15:54:45 Msec=1500 True Az=98.805 Ze=66.495 Az status=0009 Ze status=0008 15:54:45 Check angles 15:54:45 SkyScan query 15:54:46 SkyScan query done: ret=0 az=116.295<-7753 ze=66.495<-7567 Statuses=0009 0008 15:54:46 Msec=2250 True Az=116.295 Ze=66.495 Az status=0009 Ze status=0008 15:54:46 Check angles 15:54:46 SkyScan query 15:54:47 SkyScan query done: ret=0 az=133.89<-8926 ze=66.495<-7567 Statuses=0009 0008 15:54:47 Msec=3000 True Az=133.89 Ze=66.495 Az status=0009 Ze status=0008 15:54:47 Check angles 15:54:47 SkyScan query 15:54:47 SkyScan query done: ret=0 az=151.215<-10081 ze=66.495<-7567 Statuses=0009 0008 15:54:47 Msec=3750 True Az=151.215 Ze=66.495 Az status=0009 Ze status=0008 15:54:47 Check angles 15:54:47 SkyScan query 15:54:48 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:54:48 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:54:48 Message to Master queued w/err=0: serial=147558 error=0 15:54:53 Received message from Master: op=Filter serial=147559 15:54:53 Color wheel filter change from 0 to 0 15:54:53 FLIGetFilterPos err=0 currentPosition=0 15:54:53 FLIGetStepsRemaining err=0 RemainingSteps=0 15:54:53 Filter is already there-color wheel unchanged 15:54:53 Received message from Master: op=Shutter serial=147560 15:54:53 Shutter LASER close 15:54:53 Received message from Camera: op=State serial=147562 15:54:53 GetSingleValue result=40 Value=cccccccc 15:54:53 SkyScan query 15:54:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:54:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:54 Parameters OK 15:54:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:54 Set A/D data flow result=40 15:54:54 Set A/D channel type result=40 15:54:54 Set A/D encoding result=40 15:54:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:54 Set channel filter=0.000000e+000 result=40 15:54:54 Config A/D Result=40 15:54:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:54 Get A/D filter: -9.255963e+061 result=40 15:54:54 Get A/D value=-858993460 result=40 15:54:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:54 Parameters OK 15:54:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:54 Set A/D data flow result=40 15:54:54 Set A/D channel type result=40 15:54:54 Set A/D encoding result=40 15:54:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:54 Set channel filter=0.000000e+000 result=40 15:54:54 Config A/D Result=40 15:54:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:54 Get A/D filter: -9.255963e+061 result=40 15:54:54 Get A/D value=-858993460 result=40 15:54:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:54 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:54:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:54:54 Aux= 15:54:54 Message to Camera, serial 147562 queued 15:55:31 Received message from Master: op=PointingHead serial=147575 15:55:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:55:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:55:31 Point started: ret=0 15:55:31 point_skyscan result=0 15:55:32 Check angles 15:55:32 SkyScan query 15:55:32 SkyScan query done: ret=0 az=135.09<-9006 ze=36.84<-9544 Statuses=0009 0009 15:55:32 Msec=0 True Az=135.09 Ze=36.84 Az status=0009 Ze status=0009 15:55:33 Check angles 15:55:33 SkyScan query 15:55:33 SkyScan query done: ret=0 az=117.21<-7814 ze=15.495<-10967 Statuses=0009 0009 15:55:33 Msec=750 True Az=117.21 Ze=15.495 Az status=0009 Ze status=0009 [UTC 2018-12-14 15:55:33] 15:55:33 Check angles 15:55:33 SkyScan query 15:55:34 SkyScan query done: ret=0 az=98.28<-6552 ze=-7.26<-12484 Statuses=0009 0009 15:55:34 Msec=1500 True Az=98.28 Ze=-7.26 Az status=0009 Ze status=0009 15:55:34 Check angles 15:55:34 SkyScan query 15:55:35 SkyScan query done: ret=0 az=82.005<-5467 ze=-26.97<-13798 Statuses=0009 0009 15:55:35 Msec=2250 True Az=82.005 Ze=-26.97 Az status=0009 Ze status=0009 15:55:35 Check angles 15:55:35 SkyScan query 15:55:35 SkyScan query done: ret=0 az=64.455<-4297 ze=-38.595<-14573 Statuses=0009 0008 15:55:35 Msec=3000 True Az=64.455 Ze=-38.595 Az status=0009 Ze status=0008 15:55:36 Check angles 15:55:36 SkyScan query 15:55:36 SkyScan query done: ret=0 az=47.01<-3134 ze=-38.52<-14568 Statuses=0009 0008 15:55:36 Msec=3750 True Az=47.01 Ze=-38.52 Az status=0009 Ze status=0008 15:55:36 Check angles 15:55:36 SkyScan query 15:55:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:55:37 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:55:37 Message to Master queued w/err=0: serial=147575 error=0 15:55:42 Received message from Master: op=Filter serial=147576 15:55:42 Color wheel filter change from 0 to 0 15:55:42 FLIGetFilterPos err=0 currentPosition=0 15:55:42 FLIGetStepsRemaining err=0 RemainingSteps=0 15:55:42 Filter is already there-color wheel unchanged 15:55:42 Received message from Master: op=Shutter serial=147577 15:55:42 Shutter LASER close 15:55:42 Received message from Camera: op=State serial=147579 15:55:42 GetSingleValue result=40 Value=cccccccc 15:55:42 SkyScan query 15:55:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:55:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:43 Parameters OK 15:55:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:43 Set A/D data flow result=40 15:55:43 Set A/D channel type result=40 15:55:43 Set A/D encoding result=40 15:55:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:43 Set channel filter=0.000000e+000 result=40 15:55:43 Config A/D Result=40 15:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:43 Get A/D filter: -9.255963e+061 result=40 15:55:43 Get A/D value=-858993460 result=40 15:55:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:43 Parameters OK 15:55:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:43 Set A/D data flow result=40 15:55:43 Set A/D channel type result=40 15:55:43 Set A/D encoding result=40 15:55:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:43 Set channel filter=0.000000e+000 result=40 15:55:43 Config A/D Result=40 15:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:43 Get A/D filter: -9.255963e+061 result=40 15:55:43 Get A/D value=-858993460 result=40 15:55:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:55:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:55:43 Aux= 15:55:43 Message to Camera, serial 147579 queued [UTC 2018-12-14 15:55:52] 15:56:20 Received message from Master: op=PointingHead serial=147592 15:56:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:56:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:56:20 Point started: ret=0 15:56:20 point_skyscan result=0 15:56:21 Check angles 15:56:21 SkyScan query 15:56:21 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.295<-16553 Statuses=0009 0009 15:56:21 Msec=0 True Az=63.9 Ze=-68.295 Az status=0009 Ze status=0009 15:56:21 Check angles 15:56:21 SkyScan query 15:56:22 SkyScan query done: ret=0 az=81.975<-5465 ze=-90.075<-18005 Statuses=0009 0009 15:56:22 Msec=750 True Az=81.975 Ze=-90.075 Az status=0009 Ze status=0009 15:56:22 Check angles 15:56:22 SkyScan query 15:56:23 SkyScan query done: ret=0 az=99.24<-6616 ze=-110.73<-19382 Statuses=0009 0009 15:56:23 Msec=1500 True Az=99.24 Ze=-110.73 Az status=0009 Ze status=0009 15:56:23 Check angles 15:56:23 SkyScan query 15:56:23 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.535<-20769 Statuses=0009 0009 15:56:23 Msec=2250 True Az=116.76 Ze=-131.535 Az status=0009 Ze status=0009 15:56:24 Check angles 15:56:24 SkyScan query 15:56:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 15:56:24 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 15:56:24 Check angles 15:56:24 SkyScan query 15:56:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 15:56:25 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 15:56:25 Message to Master queued w/err=0: serial=147592 error=0 15:56:30 Received message from Master: op=Filter serial=147593 15:56:30 Color wheel filter change from 0 to 0 15:56:30 FLIGetFilterPos err=0 currentPosition=0 15:56:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:56:30 Filter is already there-color wheel unchanged 15:56:30 Received message from Master: op=Shutter serial=147594 15:56:30 Shutter LASER close 15:56:30 Received message from Camera: op=State serial=147596 15:56:30 GetSingleValue result=40 Value=cccccccc 15:56:30 SkyScan query 15:56:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:56:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:56:31 Parameters OK 15:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:56:31 Set A/D data flow result=40 15:56:31 Set A/D channel type result=40 15:56:31 Set A/D encoding result=40 15:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:56:31 Set channel filter=0.000000e+000 result=40 15:56:31 Config A/D Result=40 15:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:56:31 Get A/D filter: -9.255963e+061 result=40 15:56:31 Get A/D value=-858993460 result=40 15:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:56:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:56:31 Parameters OK 15:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:56:31 Set A/D data flow result=40 15:56:31 Set A/D channel type result=40 15:56:31 Set A/D encoding result=40 15:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:56:31 Set channel filter=0.000000e+000 result=40 15:56:31 Config A/D Result=40 15:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:56:31 Get A/D filter: -9.255963e+061 result=40 15:56:31 Get A/D value=-858993460 result=40 15:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:56:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:56:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:56:31 Aux= 15:56:31 Message to Camera, serial 147596 queued 15:57:08 Received message from Master: op=PointingHead serial=147609 15:57:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:57:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:57:08 Point started: ret=0 15:57:08 point_skyscan result=0 15:57:09 Check angles 15:57:09 SkyScan query 15:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0009 0009 15:57:09 Msec=0 True Az=112.995 Ze=-171.465 Az status=0009 Ze status=0009 15:57:09 Check angles 15:57:09 SkyScan query 15:57:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:57:10 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:57:10 Message to Master queued w/err=0: serial=147609 error=0 15:57:15 Received message from Master: op=Filter serial=147610 15:57:15 Color wheel filter change from 0 to 0 15:57:15 FLIGetFilterPos err=0 currentPosition=0 15:57:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:57:15 Filter is already there-color wheel unchanged 15:57:15 Received message from Master: op=Shutter serial=147611 15:57:15 Shutter LASER open 15:57:15 Received message from Camera: op=State serial=147613 15:57:15 GetSingleValue result=40 Value=cccccccc 15:57:15 SkyScan query 15:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:57:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:16 Parameters OK 15:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:16 Set A/D data flow result=40 15:57:16 Set A/D channel type result=40 15:57:16 Set A/D encoding result=40 15:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:16 Set channel filter=0.000000e+000 result=40 15:57:16 Config A/D Result=40 15:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:16 Get A/D filter: -9.255963e+061 result=40 15:57:16 Get A/D value=-858993460 result=40 15:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:16 Parameters OK 15:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:16 Set A/D data flow result=40 15:57:16 Set A/D channel type result=40 15:57:16 Set A/D encoding result=40 15:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:16 Set channel filter=0.000000e+000 result=40 15:57:16 Config A/D Result=40 15:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:16 Get A/D filter: -9.255963e+061 result=40 15:57:16 Get A/D value=-858993460 result=40 15:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:57:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:57:16 Aux= 15:57:16 Message to Camera, serial 147613 queued 15:57:24 Received message from Master: op=Shutter serial=147623 15:57:24 Shutter LASER close 15:57:25 Received message from Master: op=PointingHead serial=147627 15:57:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:57:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:57:25 Point started: ret=0 15:57:25 point_skyscan result=0 15:57:26 Check angles 15:57:26 SkyScan query 15:57:27 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.295<-21553 Statuses=0009 0009 15:57:27 Msec=0 True Az=135.9 Ze=-143.295 Az status=0009 Ze status=0009 15:57:27 Check angles 15:57:27 SkyScan query 15:57:27 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.89<-20126 Statuses=0009 0009 15:57:27 Msec=750 True Az=153.885 Ze=-121.89 Az status=0009 Ze status=0009 15:57:28 Check angles 15:57:28 SkyScan query 15:57:28 SkyScan query done: ret=0 az=171.735<-11449 ze=-100.425<-18695 Statuses=0009 0009 15:57:28 Msec=1500 True Az=171.735 Ze=-100.425 Az status=0009 Ze status=0009 15:57:28 Check angles 15:57:28 SkyScan query 15:57:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.485<-17299 Statuses=0008 0009 15:57:29 Msec=2250 True Az=176.01 Ze=-79.485 Az status=0008 Ze status=0009 15:57:29 Check angles 15:57:29 SkyScan query 15:57:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.515<-15901 Statuses=0008 0009 15:57:30 Msec=3000 True Az=176.01 Ze=-58.515 Az status=0008 Ze status=0009 15:57:30 Check angles 15:57:30 SkyScan query 15:57:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:57:30 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:57:30 Message to Master queued w/err=0: serial=147627 error=0 15:57:35 Received message from Master: op=Filter serial=147628 15:57:35 Color wheel filter change from 0 to 0 15:57:35 FLIGetFilterPos err=0 currentPosition=0 15:57:35 FLIGetStepsRemaining err=0 RemainingSteps=0 15:57:35 Filter is already there-color wheel unchanged 15:57:36 Received message from Master: op=Shutter serial=147629 15:57:36 Shutter LASER close 15:57:36 Received message from Camera: op=State serial=147631 15:57:36 GetSingleValue result=40 Value=cccccccc 15:57:36 SkyScan query 15:57:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:57:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:36 Parameters OK 15:57:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:36 Set A/D data flow result=40 15:57:36 Set A/D channel type result=40 15:57:36 Set A/D encoding result=40 15:57:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:36 Set channel filter=0.000000e+000 result=40 15:57:36 Config A/D Result=40 15:57:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:36 Get A/D filter: -9.255963e+061 result=40 15:57:36 Get A/D value=-858993460 result=40 15:57:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:36 Parameters OK 15:57:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:36 Set A/D data flow result=40 15:57:36 Set A/D channel type result=40 15:57:36 Set A/D encoding result=40 15:57:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:36 Set channel filter=0.000000e+000 result=40 15:57:36 Config A/D Result=40 15:57:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:36 Get A/D filter: -9.255963e+061 result=40 15:57:36 Get A/D value=-858993460 result=40 15:57:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:57:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:57:36 Aux= 15:57:36 Message to Camera, serial 147631 queued 15:58:12 Received message from Master: op=PointingHead serial=147643 15:58:12 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:58:12 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:58:13 Point started: ret=0 15:58:13 point_skyscan result=0 15:58:13 Check angles 15:58:13 SkyScan query 15:58:14 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.795<-13453 Statuses=0009 0009 15:58:14 Msec=0 True Az=152.94 Ze=-21.795 Az status=0009 Ze status=0009 15:58:14 Check angles 15:58:14 SkyScan query 15:58:15 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.3<-12020 Statuses=0009 0009 15:58:15 Msec=750 True Az=135.135 Ze=-0.3 Az status=0009 Ze status=0009 15:58:15 Check angles 15:58:15 SkyScan query 15:58:15 SkyScan query done: ret=0 az=117.585<-7839 ze=20.595<-10627 Statuses=0009 0009 15:58:15 Msec=1500 True Az=117.585 Ze=20.595 Az status=0009 Ze status=0009 15:58:16 Check angles 15:58:16 SkyScan query 15:58:16 SkyScan query done: ret=0 az=100.2<-6680 ze=41.52<-9232 Statuses=0009 0009 15:58:16 Msec=2250 True Az=100.2 Ze=41.52 Az status=0009 Ze status=0009 15:58:16 Check angles 15:58:16 SkyScan query 15:58:17 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 15:58:17 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 15:58:17 Check angles 15:58:17 SkyScan query 15:58:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:58:18 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:58:18 Message to Master queued w/err=0: serial=147643 error=0 15:58:23 Received message from Master: op=Filter serial=147644 15:58:23 Color wheel filter change from 0 to 0 15:58:23 FLIGetFilterPos err=0 currentPosition=0 15:58:23 FLIGetStepsRemaining err=0 RemainingSteps=0 15:58:23 Filter is already there-color wheel unchanged 15:58:23 Received message from Master: op=Shutter serial=147645 15:58:23 Shutter LASER close 15:58:23 Received message from Camera: op=State serial=147647 15:58:23 GetSingleValue result=40 Value=cccccccc 15:58:23 SkyScan query 15:58:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:58:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:23 Parameters OK 15:58:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:23 Set A/D data flow result=40 15:58:23 Set A/D channel type result=40 15:58:23 Set A/D encoding result=40 15:58:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:23 Set channel filter=0.000000e+000 result=40 15:58:23 Config A/D Result=40 15:58:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:23 Get A/D filter: -9.255963e+061 result=40 15:58:23 Get A/D value=-858993460 result=40 15:58:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:23 Parameters OK 15:58:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:23 Set A/D data flow result=40 15:58:23 Set A/D channel type result=40 15:58:23 Set A/D encoding result=40 15:58:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:23 Set channel filter=0.000000e+000 result=40 15:58:23 Config A/D Result=40 15:58:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:23 Get A/D filter: -9.255963e+061 result=40 15:58:23 Get A/D value=-858993460 result=40 15:58:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:58:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:58:23 Aux= 15:58:23 Message to Camera, serial 147647 queued 15:59:00 Received message from Master: op=PointingHead serial=147660 15:59:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:59:00 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:59:01 Point started: ret=0 15:59:01 point_skyscan result=0 15:59:01 Check angles 15:59:01 SkyScan query 15:59:02 SkyScan query done: ret=0 az=108.93<-7262 ze=38.475<-9435 Statuses=0009 0008 15:59:02 Msec=0 True Az=108.93 Ze=38.475 Az status=0009 Ze status=0008 15:59:02 Check angles 15:59:02 SkyScan query 15:59:03 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 15:59:03 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 15:59:03 Check angles 15:59:03 SkyScan query 15:59:03 SkyScan query done: ret=0 az=143.925<-9595 ze=38.505<-9433 Statuses=0009 0008 15:59:03 Msec=1500 True Az=143.925 Ze=38.505 Az status=0009 Ze status=0008 15:59:04 Check angles 15:59:04 SkyScan query 15:59:04 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 15:59:04 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 15:59:04 Check angles 15:59:04 SkyScan query 15:59:05 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:59:05 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:59:05 Check angles 15:59:05 SkyScan query 15:59:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:59:06 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 15:59:06 Message to Master queued w/err=0: serial=147660 error=0 15:59:11 Received message from Master: op=Filter serial=147661 15:59:11 Color wheel filter change from 0 to 0 15:59:11 FLIGetFilterPos err=0 currentPosition=0 15:59:11 FLIGetStepsRemaining err=0 RemainingSteps=0 15:59:11 Filter is already there-color wheel unchanged 15:59:11 Received message from Master: op=Shutter serial=147662 15:59:11 Shutter LASER close 15:59:11 Received message from Camera: op=State serial=147664 15:59:11 GetSingleValue result=40 Value=cccccccc 15:59:11 SkyScan query 15:59:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:59:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:12 Parameters OK 15:59:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:12 Set A/D data flow result=40 15:59:12 Set A/D channel type result=40 15:59:12 Set A/D encoding result=40 15:59:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:12 Set channel filter=0.000000e+000 result=40 15:59:12 Config A/D Result=40 15:59:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:12 Get A/D filter: -9.255963e+061 result=40 15:59:12 Get A/D value=-858993460 result=40 15:59:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:12 Parameters OK 15:59:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:12 Set A/D data flow result=40 15:59:12 Set A/D channel type result=40 15:59:12 Set A/D encoding result=40 15:59:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:12 Set channel filter=0.000000e+000 result=40 15:59:12 Config A/D Result=40 15:59:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:12 Get A/D filter: -9.255963e+061 result=40 15:59:12 Get A/D value=-858993460 result=40 15:59:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:59:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:59:12 Aux= 15:59:12 Message to Camera, serial 147664 queued 15:59:48 Received message from Master: op=PointingHead serial=147677 15:59:48 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:59:48 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:59:49 Point started: ret=0 15:59:49 point_skyscan result=0 15:59:49 Check angles 15:59:49 SkyScan query 15:59:50 SkyScan query done: ret=0 az=153.12<-10208 ze=9.03<-11398 Statuses=0009 0009 15:59:50 Msec=0 True Az=153.12 Ze=9.03 Az status=0009 Ze status=0009 15:59:50 Check angles 15:59:50 SkyScan query 15:59:51 SkyScan query done: ret=0 az=135.675<-9045 ze=-12<-12800 Statuses=0009 0009 15:59:51 Msec=750 True Az=135.675 Ze=-12 Az status=0009 Ze status=0009 15:59:51 Check angles 15:59:51 SkyScan query 15:59:52 SkyScan query done: ret=0 az=118.155<-7877 ze=-32.91<-14194 Statuses=0009 0009 15:59:52 Msec=1500 True Az=118.155 Ze=-32.91 Az status=0009 Ze status=0009 15:59:52 Check angles 15:59:52 SkyScan query 15:59:52 SkyScan query done: ret=0 az=100.71<-6714 ze=-51.51<-15434 Statuses=0009 0009 15:59:52 Msec=2250 True Az=100.71 Ze=-51.51 Az status=0009 Ze status=0009 15:59:52 Check angles 15:59:52 SkyScan query 15:59:53 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:59:53 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:59:53 Check angles 15:59:53 SkyScan query 15:59:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:59:54 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:59:54 Message to Master queued w/err=0: serial=147677 error=0 15:59:59 Received message from Master: op=Filter serial=147678 15:59:59 Color wheel filter change from 0 to 0 15:59:59 FLIGetFilterPos err=0 currentPosition=0 15:59:59 FLIGetStepsRemaining err=0 RemainingSteps=0 15:59:59 Filter is already there-color wheel unchanged 15:59:59 Received message from Master: op=Shutter serial=147679 15:59:59 Shutter LASER close 15:59:59 Received message from Camera: op=State serial=147681 15:59:59 GetSingleValue result=40 Value=cccccccc 15:59:59 SkyScan query 16:00:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:00:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:00 Parameters OK 16:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:00 Set A/D data flow result=40 16:00:00 Set A/D channel type result=40 16:00:00 Set A/D encoding result=40 16:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:00 Set channel filter=0.000000e+000 result=40 16:00:00 Config A/D Result=40 16:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:00 Get A/D filter: -9.255963e+061 result=40 16:00:00 Get A/D value=-858993460 result=40 16:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:00 Parameters OK 16:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:00 Set A/D data flow result=40 16:00:00 Set A/D channel type result=40 16:00:00 Set A/D encoding result=40 16:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:00 Set channel filter=0.000000e+000 result=40 16:00:00 Config A/D Result=40 16:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:00 Get A/D filter: -9.255963e+061 result=40 16:00:00 Get A/D value=-858993460 result=40 16:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:00:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:00:00 Aux= 16:00:00 Message to Camera, serial 147681 queued 16:00:36 Received message from Master: op=PointingHead serial=147694 16:00:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:00:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:00:37 Point started: ret=0 16:00:37 point_skyscan result=0 16:00:37 Check angles 16:00:37 SkyScan query 16:00:38 SkyScan query done: ret=0 az=109.11<-7274 ze=-81.48<-17432 Statuses=0009 0009 16:00:38 Msec=0 True Az=109.11 Ze=-81.48 Az status=0009 Ze status=0009 16:00:38 Check angles 16:00:38 SkyScan query 16:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.45<-18830 Statuses=0008 0009 16:00:39 Msec=750 True Az=112.995 Ze=-102.45 Az status=0008 Ze status=0009 16:00:39 Check angles 16:00:39 SkyScan query 16:00:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 16:00:40 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 16:00:40 Check angles 16:00:40 SkyScan query 16:00:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 16:00:40 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 16:00:40 Check angles 16:00:40 SkyScan query 16:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 16:00:41 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 16:00:41 Check angles 16:00:41 SkyScan query 16:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:00:42 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:00:42 Message to Master queued w/err=0: serial=147694 error=0 16:00:47 Received message from Master: op=Filter serial=147695 16:00:47 Color wheel filter change from 0 to 0 16:00:47 FLIGetFilterPos err=0 currentPosition=0 16:00:47 FLIGetStepsRemaining err=0 RemainingSteps=0 16:00:47 Filter is already there-color wheel unchanged 16:00:47 Received message from Master: op=Shutter serial=147696 16:00:47 Shutter LASER open 16:00:47 Received message from Camera: op=State serial=147698 16:00:47 GetSingleValue result=40 Value=cccccccc 16:00:47 SkyScan query 16:00:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:00:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:48 Parameters OK 16:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:48 Set A/D data flow result=40 16:00:48 Set A/D channel type result=40 16:00:48 Set A/D encoding result=40 16:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:48 Set channel filter=0.000000e+000 result=40 16:00:48 Config A/D Result=40 16:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:48 Get A/D filter: -9.255963e+061 result=40 16:00:48 Get A/D value=-858993460 result=40 16:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:48 Parameters OK 16:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:48 Set A/D data flow result=40 16:00:48 Set A/D channel type result=40 16:00:48 Set A/D encoding result=40 16:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:48 Set channel filter=0.000000e+000 result=40 16:00:48 Config A/D Result=40 16:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:48 Get A/D filter: -9.255963e+061 result=40 16:00:48 Get A/D value=-858993460 result=40 16:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:00:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:00:48 Aux= 16:00:48 Message to Camera, serial 147698 queued 16:00:56 Received message from Master: op=Shutter serial=147708 16:00:56 Shutter LASER close 16:00:57 Received message from Master: op=PointingHead serial=147712 16:00:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:00:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:00:57 Point started: ret=0 16:00:57 point_skyscan result=0 16:00:58 Check angles 16:00:58 SkyScan query 16:00:58 SkyScan query done: ret=0 az=90.21<-6014 ze=157.56<-1496 Statuses=0009 0009 16:00:58 Msec=0 True Az=90.21 Ze=157.56 Az status=0009 Ze status=0009 16:00:58 Check angles 16:00:58 SkyScan query 16:00:59 SkyScan query done: ret=0 az=72.705<-4847 ze=136.56<-2896 Statuses=0009 0009 16:00:59 Msec=750 True Az=72.705 Ze=136.56 Az status=0009 Ze status=0009 16:00:59 Check angles 16:00:59 SkyScan query 16:01:00 SkyScan query done: ret=0 az=55.32<-3688 ze=115.68<-4288 Statuses=0009 0009 16:01:00 Msec=1500 True Az=55.32 Ze=115.68 Az status=0009 Ze status=0009 16:01:00 Check angles 16:01:00 SkyScan query 16:01:01 SkyScan query done: ret=0 az=41.01<-2734 ze=94.665<-5689 Statuses=0009 0009 16:01:01 Msec=2250 True Az=41.01 Ze=94.665 Az status=0009 Ze status=0009 16:01:01 Check angles 16:01:01 SkyScan query 16:01:01 SkyScan query done: ret=0 az=40.995<-2733 ze=73.275<-7115 Statuses=0008 0009 16:01:01 Msec=3000 True Az=40.995 Ze=73.275 Az status=0008 Ze status=0009 16:01:01 Check angles 16:01:01 SkyScan query 16:01:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.755<-8483 Statuses=0008 0009 16:01:02 Msec=3750 True Az=40.995 Ze=52.755 Az status=0008 Ze status=0009 16:01:02 Check angles 16:01:02 SkyScan query 16:01:03 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 16:01:03 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 16:01:03 Message to Master queued w/err=0: serial=147712 error=0 16:01:08 Received message from Master: op=Filter serial=147713 16:01:08 Color wheel filter change from 0 to 0 16:01:08 FLIGetFilterPos err=0 currentPosition=0 16:01:08 FLIGetStepsRemaining err=0 RemainingSteps=0 16:01:08 Filter is already there-color wheel unchanged 16:01:08 Received message from Master: op=Shutter serial=147714 16:01:08 Shutter LASER close 16:01:08 Received message from Camera: op=State serial=147716 16:01:08 GetSingleValue result=40 Value=cccccccc 16:01:08 SkyScan query 16:01:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:01:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:09 Parameters OK 16:01:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:09 Set A/D data flow result=40 16:01:09 Set A/D channel type result=40 16:01:09 Set A/D encoding result=40 16:01:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:09 Set channel filter=0.000000e+000 result=40 16:01:09 Config A/D Result=40 16:01:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:09 Get A/D filter: -9.255963e+061 result=40 16:01:09 Get A/D value=-858993460 result=40 16:01:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:09 Parameters OK 16:01:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:09 Set A/D data flow result=40 16:01:09 Set A/D channel type result=40 16:01:09 Set A/D encoding result=40 16:01:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:09 Set channel filter=0.000000e+000 result=40 16:01:09 Config A/D Result=40 16:01:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:09 Get A/D filter: -9.255963e+061 result=40 16:01:09 Get A/D value=-858993460 result=40 16:01:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:01:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:01:09 Aux= 16:01:09 Message to Camera, serial 147716 queued 16:01:46 Received message from Master: op=PointingHead serial=147729 16:01:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:01:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:01:46 Point started: ret=0 16:01:46 point_skyscan result=0 16:01:47 Check angles 16:01:47 SkyScan query 16:01:47 SkyScan query done: ret=0 az=64.35<-4290 ze=66.54<-7564 Statuses=0009 0008 16:01:47 Msec=0 True Az=64.35 Ze=66.54 Az status=0009 Ze status=0008 16:01:47 Check angles 16:01:47 SkyScan query 16:01:48 SkyScan query done: ret=0 az=81.915<-5461 ze=66.51<-7566 Statuses=0009 0008 16:01:48 Msec=750 True Az=81.915 Ze=66.51 Az status=0009 Ze status=0008 16:01:48 Check angles 16:01:48 SkyScan query 16:01:49 SkyScan query done: ret=0 az=99.27<-6618 ze=66.495<-7567 Statuses=0009 0008 16:01:49 Msec=1500 True Az=99.27 Ze=66.495 Az status=0009 Ze status=0008 16:01:49 Check angles 16:01:49 SkyScan query 16:01:50 SkyScan query done: ret=0 az=116.82<-7788 ze=66.495<-7567 Statuses=0009 0008 16:01:50 Msec=2250 True Az=116.82 Ze=66.495 Az status=0009 Ze status=0008 16:01:50 Check angles 16:01:50 SkyScan query 16:01:50 SkyScan query done: ret=0 az=134.325<-8955 ze=66.495<-7567 Statuses=0009 0008 16:01:50 Msec=3000 True Az=134.325 Ze=66.495 Az status=0009 Ze status=0008 16:01:50 Check angles 16:01:50 SkyScan query 16:01:51 SkyScan query done: ret=0 az=151.695<-10113 ze=66.495<-7567 Statuses=0009 0008 16:01:51 Msec=3750 True Az=151.695 Ze=66.495 Az status=0009 Ze status=0008 16:01:51 Check angles 16:01:51 SkyScan query 16:01:52 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:01:52 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:01:52 Message to Master queued w/err=0: serial=147729 error=0 16:01:57 Received message from Master: op=Filter serial=147730 16:01:57 Color wheel filter change from 0 to 0 16:01:57 FLIGetFilterPos err=0 currentPosition=0 16:01:57 FLIGetStepsRemaining err=0 RemainingSteps=0 16:01:57 Filter is already there-color wheel unchanged 16:01:57 Received message from Master: op=Shutter serial=147731 16:01:57 Shutter LASER close 16:01:57 Received message from Camera: op=State serial=147733 16:01:57 GetSingleValue result=40 Value=cccccccc 16:01:57 SkyScan query 16:01:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:01:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:58 Parameters OK 16:01:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:58 Set A/D data flow result=40 16:01:58 Set A/D channel type result=40 16:01:58 Set A/D encoding result=40 16:01:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:58 Set channel filter=0.000000e+000 result=40 16:01:58 Config A/D Result=40 16:01:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:58 Get A/D filter: -9.255963e+061 result=40 16:01:58 Get A/D value=-858993460 result=40 16:01:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:58 Parameters OK 16:01:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:58 Set A/D data flow result=40 16:01:58 Set A/D channel type result=40 16:01:58 Set A/D encoding result=40 16:01:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:58 Set channel filter=0.000000e+000 result=40 16:01:58 Config A/D Result=40 16:01:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:58 Get A/D filter: -9.255963e+061 result=40 16:01:58 Get A/D value=-858993460 result=40 16:01:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:01:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:01:58 Aux= 16:01:58 Message to Camera, serial 147733 queued 16:02:34 Received message from Master: op=PointingHead serial=147746 16:02:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:02:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:02:35 Point started: ret=0 16:02:35 point_skyscan result=0 16:02:36 Check angles 16:02:36 SkyScan query 16:02:36 SkyScan query done: ret=0 az=134.76<-8984 ze=36.66<-9556 Statuses=0009 0009 16:02:36 Msec=0 True Az=134.76 Ze=36.66 Az status=0009 Ze status=0009 16:02:36 Check angles 16:02:36 SkyScan query 16:02:37 SkyScan query done: ret=0 az=117.015<-7801 ze=15.3<-10980 Statuses=0009 0009 16:02:37 Msec=750 True Az=117.015 Ze=15.3 Az status=0009 Ze status=0009 16:02:37 Check angles 16:02:37 SkyScan query 16:02:38 SkyScan query done: ret=0 az=99.57<-6638 ze=-5.745<-12383 Statuses=0009 0009 16:02:38 Msec=1500 True Az=99.57 Ze=-5.745 Az status=0009 Ze status=0009 16:02:38 Check angles 16:02:38 SkyScan query 16:02:38 SkyScan query done: ret=0 az=82.11<-5474 ze=-26.7<-13780 Statuses=0009 0009 16:02:38 Msec=2250 True Az=82.11 Ze=-26.7 Az status=0009 Ze status=0009 16:02:39 Check angles 16:02:39 SkyScan query 16:02:39 SkyScan query done: ret=0 az=64.32<-4288 ze=-38.595<-14573 Statuses=0009 0008 16:02:39 Msec=3000 True Az=64.32 Ze=-38.595 Az status=0009 Ze status=0008 16:02:39 Check angles 16:02:39 SkyScan query 16:02:40 SkyScan query done: ret=0 az=46.875<-3125 ze=-38.52<-14568 Statuses=0009 0008 16:02:40 Msec=3750 True Az=46.875 Ze=-38.52 Az status=0009 Ze status=0008 16:02:40 Check angles 16:02:40 SkyScan query 16:02:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:02:41 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:02:41 Message to Master queued w/err=0: serial=147746 error=0 16:02:46 Received message from Master: op=Filter serial=147747 16:02:46 Color wheel filter change from 0 to 0 16:02:46 FLIGetFilterPos err=0 currentPosition=0 16:02:46 FLIGetStepsRemaining err=0 RemainingSteps=0 16:02:46 Filter is already there-color wheel unchanged 16:02:46 Received message from Master: op=Shutter serial=147748 16:02:46 Shutter LASER close 16:02:46 Received message from Camera: op=State serial=147750 16:02:46 GetSingleValue result=40 Value=cccccccc 16:02:46 SkyScan query 16:02:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:02:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:46 Parameters OK 16:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:46 Set A/D data flow result=40 16:02:46 Set A/D channel type result=40 16:02:46 Set A/D encoding result=40 16:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:46 Set channel filter=0.000000e+000 result=40 16:02:46 Config A/D Result=40 16:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:46 Get A/D filter: -9.255963e+061 result=40 16:02:46 Get A/D value=-858993460 result=40 16:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:46 Parameters OK 16:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:46 Set A/D data flow result=40 16:02:46 Set A/D channel type result=40 16:02:46 Set A/D encoding result=40 16:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:46 Set channel filter=0.000000e+000 result=40 16:02:46 Config A/D Result=40 16:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:46 Get A/D filter: -9.255963e+061 result=40 16:02:46 Get A/D value=-858993460 result=40 16:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:02:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:02:46 Aux= 16:02:46 Message to Camera, serial 147750 queued 16:03:22 Received message from Master: op=PointingHead serial=147762 16:03:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:03:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:03:23 Point started: ret=0 16:03:23 point_skyscan result=0 16:03:23 Check angles 16:03:23 SkyScan query 16:03:24 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.085<-16539 Statuses=0009 0009 16:03:24 Msec=0 True Az=63.795 Ze=-68.085 Az status=0009 Ze status=0009 16:03:24 Check angles 16:03:24 SkyScan query 16:03:25 SkyScan query done: ret=0 az=81.255<-5417 ze=-89.055<-17937 Statuses=0009 0009 16:03:25 Msec=750 True Az=81.255 Ze=-89.055 Az status=0009 Ze status=0009 16:03:25 Check angles 16:03:25 SkyScan query 16:03:26 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.46<-19364 Statuses=0009 0009 16:03:26 Msec=1500 True Az=99.15 Ze=-110.46 Az status=0009 Ze status=0009 16:03:26 Check angles 16:03:26 SkyScan query 16:03:26 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.355<-20757 Statuses=0009 0009 16:03:26 Msec=2250 True Az=116.7 Ze=-131.355 Az status=0009 Ze status=0009 16:03:26 Check angles 16:03:26 SkyScan query 16:03:27 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 16:03:27 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 16:03:27 Check angles 16:03:27 SkyScan query 16:03:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 16:03:28 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 16:03:28 Message to Master queued w/err=0: serial=147762 error=0 16:03:33 Received message from Master: op=Filter serial=147763 16:03:33 Color wheel filter change from 0 to 0 16:03:33 FLIGetFilterPos err=0 currentPosition=0 16:03:33 FLIGetStepsRemaining err=0 RemainingSteps=0 16:03:33 Filter is already there-color wheel unchanged 16:03:33 Received message from Master: op=Shutter serial=147764 16:03:33 Shutter LASER close 16:03:33 Received message from Camera: op=State serial=147766 16:03:33 GetSingleValue result=40 Value=cccccccc 16:03:33 SkyScan query 16:03:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:03:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:34 Parameters OK 16:03:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:34 Set A/D data flow result=40 16:03:34 Set A/D channel type result=40 16:03:34 Set A/D encoding result=40 16:03:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:34 Set channel filter=0.000000e+000 result=40 16:03:34 Config A/D Result=40 16:03:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:34 Get A/D filter: -9.255963e+061 result=40 16:03:34 Get A/D value=-858993460 result=40 16:03:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:34 Parameters OK 16:03:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:34 Set A/D data flow result=40 16:03:34 Set A/D channel type result=40 16:03:34 Set A/D encoding result=40 16:03:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:34 Set channel filter=0.000000e+000 result=40 16:03:34 Config A/D Result=40 16:03:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:34 Get A/D filter: -9.255963e+061 result=40 16:03:34 Get A/D value=-858993460 result=40 16:03:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:34 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:03:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:03:34 Aux= 16:03:34 Message to Camera, serial 147766 queued 16:04:10 Received message from Master: op=PointingHead serial=147779 16:04:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:04:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:04:11 Point started: ret=0 16:04:11 point_skyscan result=0 16:04:11 Check angles 16:04:11 SkyScan query 16:04:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 16:04:12 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 16:04:12 Check angles 16:04:12 SkyScan query 16:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:04:13 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:04:13 Message to Master queued w/err=0: serial=147779 error=0 16:04:18 Received message from Master: op=Filter serial=147780 16:04:18 Color wheel filter change from 0 to 0 16:04:18 FLIGetFilterPos err=0 currentPosition=0 16:04:18 FLIGetStepsRemaining err=0 RemainingSteps=0 16:04:18 Filter is already there-color wheel unchanged 16:04:18 Received message from Master: op=Shutter serial=147781 16:04:18 Shutter LASER open 16:04:18 Received message from Camera: op=State serial=147783 16:04:18 GetSingleValue result=40 Value=cccccccc 16:04:18 SkyScan query 16:04:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:04:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:19 Parameters OK 16:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:19 Set A/D data flow result=40 16:04:19 Set A/D channel type result=40 16:04:19 Set A/D encoding result=40 16:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:19 Set channel filter=0.000000e+000 result=40 16:04:19 Config A/D Result=40 16:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:19 Get A/D filter: -9.255963e+061 result=40 16:04:19 Get A/D value=-858993460 result=40 16:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:19 Parameters OK 16:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:19 Set A/D data flow result=40 16:04:19 Set A/D channel type result=40 16:04:19 Set A/D encoding result=40 16:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:19 Set channel filter=0.000000e+000 result=40 16:04:19 Config A/D Result=40 16:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:19 Get A/D filter: -9.255963e+061 result=40 16:04:19 Get A/D value=-858993460 result=40 16:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:04:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:04:19 Aux= 16:04:19 Message to Camera, serial 147783 queued 16:04:27 Received message from Master: op=Shutter serial=147793 16:04:27 Shutter LASER close 16:04:28 Received message from Master: op=PointingHead serial=147797 16:04:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:04:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:04:28 Point started: ret=0 16:04:28 point_skyscan result=0 16:04:29 Check angles 16:04:29 SkyScan query 16:04:29 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.04<-21536 Statuses=0009 0009 16:04:29 Msec=0 True Az=136.14 Ze=-143.04 Az status=0009 Ze status=0009 16:04:30 Check angles 16:04:30 SkyScan query 16:04:30 SkyScan query done: ret=0 az=153.975<-10265 ze=-121.62<-20108 Statuses=0009 0009 16:04:30 Msec=750 True Az=153.975 Ze=-121.62 Az status=0009 Ze status=0009 16:04:30 Check angles 16:04:30 SkyScan query 16:04:31 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.56<-18704 Statuses=0009 0009 16:04:31 Msec=1500 True Az=171.48 Ze=-100.56 Az status=0009 Ze status=0009 16:04:31 Check angles 16:04:31 SkyScan query 16:04:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.665<-17311 Statuses=0008 0009 16:04:32 Msec=2250 True Az=176.01 Ze=-79.665 Az status=0008 Ze status=0009 16:04:32 Check angles 16:04:32 SkyScan query 16:04:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.23<-15882 Statuses=0008 0009 16:04:32 Msec=3000 True Az=176.01 Ze=-58.23 Az status=0008 Ze status=0009 16:04:33 Check angles 16:04:33 SkyScan query 16:04:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:04:33 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:04:33 Message to Master queued w/err=0: serial=147797 error=0 16:04:38 Received message from Master: op=Filter serial=147798 16:04:38 Color wheel filter change from 0 to 0 16:04:38 FLIGetFilterPos err=0 currentPosition=0 16:04:38 FLIGetStepsRemaining err=0 RemainingSteps=0 16:04:38 Filter is already there-color wheel unchanged 16:04:38 Received message from Master: op=Shutter serial=147799 16:04:38 Shutter LASER close 16:04:39 Received message from Camera: op=State serial=147801 16:04:39 GetSingleValue result=40 Value=cccccccc 16:04:39 SkyScan query 16:04:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:04:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:39 Parameters OK 16:04:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:39 Set A/D data flow result=40 16:04:39 Set A/D channel type result=40 16:04:39 Set A/D encoding result=40 16:04:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:39 Set channel filter=0.000000e+000 result=40 16:04:39 Config A/D Result=40 16:04:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:39 Get A/D filter: -9.255963e+061 result=40 16:04:39 Get A/D value=-858993460 result=40 16:04:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:39 Parameters OK 16:04:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:39 Set A/D data flow result=40 16:04:39 Set A/D channel type result=40 16:04:39 Set A/D encoding result=40 16:04:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:39 Set channel filter=0.000000e+000 result=40 16:04:39 Config A/D Result=40 16:04:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:39 Get A/D filter: -9.255963e+061 result=40 16:04:39 Get A/D value=-858993460 result=40 16:04:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:04:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:04:39 Aux= 16:04:39 Message to Camera, serial 147801 queued 16:05:16 Received message from Master: op=PointingHead serial=147814 16:05:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:05:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:05:16 Point started: ret=0 16:05:16 point_skyscan result=0 16:05:17 Check angles 16:05:17 SkyScan query 16:05:18 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.9<-13460 Statuses=0009 0009 16:05:18 Msec=0 True Az=153.165 Ze=-21.9 Az status=0009 Ze status=0009 16:05:18 Check angles 16:05:18 SkyScan query 16:05:18 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.51<-12034 Statuses=0009 0009 16:05:18 Msec=750 True Az=135.315 Ze=-0.51 Az status=0009 Ze status=0009 16:05:19 Check angles 16:05:19 SkyScan query 16:05:19 SkyScan query done: ret=0 az=117.825<-7855 ze=20.46<-10636 Statuses=0009 0009 16:05:19 Msec=1500 True Az=117.825 Ze=20.46 Az status=0009 Ze status=0009 16:05:19 Check angles 16:05:19 SkyScan query 16:05:20 SkyScan query done: ret=0 az=100.425<-6695 ze=41.415<-9239 Statuses=0009 0009 16:05:20 Msec=2250 True Az=100.425 Ze=41.415 Az status=0009 Ze status=0009 16:05:20 Check angles 16:05:20 SkyScan query 16:05:21 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:05:21 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:05:21 Check angles 16:05:21 SkyScan query 16:05:21 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 16:05:21 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 16:05:21 Message to Master queued w/err=0: serial=147814 error=0 16:05:26 Received message from Master: op=Filter serial=147815 16:05:26 Color wheel filter change from 0 to 0 16:05:26 FLIGetFilterPos err=0 currentPosition=0 16:05:26 FLIGetStepsRemaining err=0 RemainingSteps=0 16:05:26 Filter is already there-color wheel unchanged 16:05:27 Received message from Master: op=Shutter serial=147816 16:05:27 Shutter LASER close 16:05:27 Received message from Camera: op=State serial=147818 16:05:27 GetSingleValue result=40 Value=cccccccc 16:05:27 SkyScan query 16:05:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:05:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:27 Parameters OK 16:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:27 Set A/D data flow result=40 16:05:27 Set A/D channel type result=40 16:05:27 Set A/D encoding result=40 16:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:27 Set channel filter=0.000000e+000 result=40 16:05:27 Config A/D Result=40 16:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:27 Get A/D filter: -9.255963e+061 result=40 16:05:27 Get A/D value=-858993460 result=40 16:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:27 Parameters OK 16:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:27 Set A/D data flow result=40 16:05:27 Set A/D channel type result=40 16:05:27 Set A/D encoding result=40 16:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:27 Set channel filter=0.000000e+000 result=40 16:05:27 Config A/D Result=40 16:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:27 Get A/D filter: -9.255963e+061 result=40 16:05:27 Get A/D value=-858993460 result=40 16:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:05:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:05:27 Aux= 16:05:27 Message to Camera, serial 147818 queued 16:06:04 Received message from Master: op=PointingHead serial=147831 16:06:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:06:04 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:06:04 Point started: ret=0 16:06:04 point_skyscan result=0 16:06:05 Check angles 16:06:05 SkyScan query 16:06:06 SkyScan query done: ret=0 az=108.9<-7260 ze=38.475<-9435 Statuses=0009 0008 16:06:06 Msec=0 True Az=108.9 Ze=38.475 Az status=0009 Ze status=0008 16:06:06 Check angles 16:06:06 SkyScan query 16:06:06 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 16:06:06 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 16:06:07 Check angles 16:06:07 SkyScan query 16:06:07 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 16:06:07 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 16:06:07 Check angles 16:06:07 SkyScan query [UTC 2018-12-14 16:06:08] 16:06:08 SkyScan query done: ret=0 az=161.295<-10753 ze=38.505<-9433 Statuses=0009 0008 16:06:08 Msec=2250 True Az=161.295 Ze=38.505 Az status=0009 Ze status=0008 16:06:08 Check angles 16:06:08 SkyScan query 16:06:09 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:06:09 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:06:09 Check angles 16:06:09 SkyScan query 16:06:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:06:09 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:06:09 Message to Master queued w/err=0: serial=147831 error=0 16:06:14 Received message from Master: op=Filter serial=147832 16:06:14 Color wheel filter change from 0 to 0 16:06:14 FLIGetFilterPos err=0 currentPosition=0 16:06:14 FLIGetStepsRemaining err=0 RemainingSteps=0 16:06:14 Filter is already there-color wheel unchanged 16:06:15 Received message from Master: op=Shutter serial=147833 16:06:15 Shutter LASER close 16:06:15 Received message from Camera: op=State serial=147835 16:06:15 GetSingleValue result=40 Value=cccccccc 16:06:15 SkyScan query 16:06:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:06:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:15 Parameters OK 16:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:15 Set A/D data flow result=40 16:06:15 Set A/D channel type result=40 16:06:15 Set A/D encoding result=40 16:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:15 Set channel filter=0.000000e+000 result=40 16:06:15 Config A/D Result=40 16:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:15 Get A/D filter: -9.255963e+061 result=40 16:06:15 Get A/D value=-858993460 result=40 16:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:15 Parameters OK 16:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:15 Set A/D data flow result=40 16:06:15 Set A/D channel type result=40 16:06:15 Set A/D encoding result=40 16:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:15 Set channel filter=0.000000e+000 result=40 16:06:15 Config A/D Result=40 16:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:15 Get A/D filter: -9.255963e+061 result=40 16:06:15 Get A/D value=-858993460 result=40 16:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:06:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:06:15 Aux= 16:06:15 Message to Camera, serial 147835 queued 16:06:52 Received message from Master: op=PointingHead serial=147848 16:06:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:06:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:06:52 Point started: ret=0 16:06:52 point_skyscan result=0 16:06:53 Check angles 16:06:53 SkyScan query 16:06:54 SkyScan query done: ret=0 az=152.655<-10177 ze=8.175<-11455 Statuses=0009 0009 16:06:54 Msec=0 True Az=152.655 Ze=8.175 Az status=0009 Ze status=0009 16:06:54 Check angles 16:06:54 SkyScan query 16:06:55 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.675<-12845 Statuses=0009 0009 16:06:55 Msec=750 True Az=135.12 Ze=-12.675 Az status=0009 Ze status=0009 16:06:55 Check angles 16:06:55 SkyScan query 16:06:55 SkyScan query done: ret=0 az=117.315<-7821 ze=-34.155<-14277 Statuses=0009 0009 16:06:55 Msec=1500 True Az=117.315 Ze=-34.155 Az status=0009 Ze status=0009 16:06:55 Check angles 16:06:55 SkyScan query 16:06:56 SkyScan query done: ret=0 az=99.795<-6653 ze=-51.585<-15439 Statuses=0009 0009 16:06:56 Msec=2250 True Az=99.795 Ze=-51.585 Az status=0009 Ze status=0009 16:06:56 Check angles 16:06:56 SkyScan query 16:06:57 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 16:06:57 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 16:06:57 Check angles 16:06:57 SkyScan query 16:06:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:06:58 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:06:58 Message to Master queued w/err=0: serial=147848 error=0 16:07:03 Received message from Master: op=Filter serial=147849 16:07:03 Color wheel filter change from 0 to 0 16:07:03 FLIGetFilterPos err=0 currentPosition=0 16:07:03 FLIGetStepsRemaining err=0 RemainingSteps=0 16:07:03 Filter is already there-color wheel unchanged 16:07:03 Received message from Master: op=Shutter serial=147850 16:07:03 Shutter LASER close 16:07:03 Received message from Camera: op=State serial=147852 16:07:03 GetSingleValue result=40 Value=cccccccc 16:07:03 SkyScan query 16:07:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:07:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:03 Parameters OK 16:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:03 Set A/D data flow result=40 16:07:03 Set A/D channel type result=40 16:07:03 Set A/D encoding result=40 16:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:03 Set channel filter=0.000000e+000 result=40 16:07:03 Config A/D Result=40 16:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:03 Get A/D filter: -9.255963e+061 result=40 16:07:03 Get A/D value=-858993460 result=40 16:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:03 Parameters OK 16:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:03 Set A/D data flow result=40 16:07:03 Set A/D channel type result=40 16:07:03 Set A/D encoding result=40 16:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:03 Set channel filter=0.000000e+000 result=40 16:07:03 Config A/D Result=40 16:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:03 Get A/D filter: -9.255963e+061 result=40 16:07:03 Get A/D value=-858993460 result=40 16:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:07:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:07:03 Aux= 16:07:03 Message to Camera, serial 147852 queued 16:07:40 Received message from Master: op=PointingHead serial=147865 16:07:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:07:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:07:41 Point started: ret=0 16:07:41 point_skyscan result=0 16:07:41 Check angles 16:07:41 SkyScan query 16:07:42 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.21<-17414 Statuses=0009 0009 16:07:42 Msec=0 True Az=109.125 Ze=-81.21 Az status=0009 Ze status=0009 16:07:42 Check angles 16:07:42 SkyScan query 16:07:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 16:07:43 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 16:07:43 Check angles 16:07:43 SkyScan query 16:07:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 16:07:43 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 16:07:44 Check angles 16:07:44 SkyScan query 16:07:44 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.525<-21635 Statuses=0008 0009 16:07:44 Msec=2250 True Az=112.98 Ze=-144.525 Az status=0008 Ze status=0009 16:07:44 Check angles 16:07:44 SkyScan query 16:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.9<-23060 Statuses=0008 0009 16:07:45 Msec=3000 True Az=112.995 Ze=-165.9 Az status=0008 Ze status=0009 16:07:45 Check angles 16:07:45 SkyScan query 16:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:07:46 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:07:46 Message to Master queued w/err=0: serial=147865 error=0 16:07:51 Received message from Master: op=Filter serial=147866 16:07:51 Color wheel filter change from 0 to 0 16:07:51 FLIGetFilterPos err=0 currentPosition=0 16:07:51 FLIGetStepsRemaining err=0 RemainingSteps=0 16:07:51 Filter is already there-color wheel unchanged 16:07:51 Received message from Master: op=Shutter serial=147867 16:07:51 Shutter LASER open 16:07:51 Received message from Camera: op=State serial=147869 16:07:51 GetSingleValue result=40 Value=cccccccc 16:07:51 SkyScan query 16:07:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:07:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:52 Parameters OK 16:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:52 Set A/D data flow result=40 16:07:52 Set A/D channel type result=40 16:07:52 Set A/D encoding result=40 16:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:52 Set channel filter=0.000000e+000 result=40 16:07:52 Config A/D Result=40 16:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:52 Get A/D filter: -9.255963e+061 result=40 16:07:52 Get A/D value=-858993460 result=40 16:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:52 Parameters OK 16:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:52 Set A/D data flow result=40 16:07:52 Set A/D channel type result=40 16:07:52 Set A/D encoding result=40 16:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:52 Set channel filter=0.000000e+000 result=40 16:07:52 Config A/D Result=40 16:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:52 Get A/D filter: -9.255963e+061 result=40 16:07:52 Get A/D value=-858993460 result=40 16:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:07:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:07:52 Aux= 16:07:52 Message to Camera, serial 147869 queued 16:08:00 Received message from Master: op=Shutter serial=147879 16:08:00 Shutter LASER close 16:08:01 Received message from Master: op=PointingHead serial=147883 16:08:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:08:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:08:01 Point started: ret=0 16:08:01 point_skyscan result=0 16:08:02 Check angles 16:08:02 SkyScan query 16:08:02 SkyScan query done: ret=0 az=89.805<-5987 ze=157.2<-1520 Statuses=0009 0009 16:08:02 Msec=0 True Az=89.805 Ze=157.2 Az status=0009 Ze status=0009 16:08:02 Check angles 16:08:02 SkyScan query 16:08:03 SkyScan query done: ret=0 az=71.94<-4796 ze=135.825<-2945 Statuses=0009 0009 16:08:03 Msec=750 True Az=71.94 Ze=135.825 Az status=0009 Ze status=0009 16:08:03 Check angles 16:08:03 SkyScan query 16:08:04 SkyScan query done: ret=0 az=54.27<-3618 ze=114.345<-4377 Statuses=0009 0009 16:08:04 Msec=1500 True Az=54.27 Ze=114.345 Az status=0009 Ze status=0009 16:08:04 Check angles 16:08:04 SkyScan query 16:08:04 SkyScan query done: ret=0 az=40.98<-2732 ze=93.48<-5768 Statuses=0009 0009 16:08:04 Msec=2250 True Az=40.98 Ze=93.48 Az status=0009 Ze status=0009 16:08:05 Check angles 16:08:05 SkyScan query 16:08:05 SkyScan query done: ret=0 az=40.98<-2732 ze=72.495<-7167 Statuses=0008 0009 16:08:05 Msec=3000 True Az=40.98 Ze=72.495 Az status=0008 Ze status=0009 16:08:05 Check angles 16:08:05 SkyScan query 16:08:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 16:08:06 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 16:08:06 Check angles 16:08:06 SkyScan query 16:08:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:08:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:08:07 Message to Master queued w/err=0: serial=147883 error=0 16:08:12 Received message from Master: op=Filter serial=147884 16:08:12 Color wheel filter change from 0 to 0 16:08:12 FLIGetFilterPos err=0 currentPosition=0 16:08:12 FLIGetStepsRemaining err=0 RemainingSteps=0 16:08:12 Filter is already there-color wheel unchanged 16:08:12 Received message from Master: op=Shutter serial=147885 16:08:12 Shutter LASER close 16:08:12 Received message from Camera: op=State serial=147887 16:08:12 GetSingleValue result=40 Value=cccccccc 16:08:12 SkyScan query 16:08:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:08:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:13 Parameters OK 16:08:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:13 Set A/D data flow result=40 16:08:13 Set A/D channel type result=40 16:08:13 Set A/D encoding result=40 16:08:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:13 Set channel filter=0.000000e+000 result=40 16:08:13 Config A/D Result=40 16:08:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:13 Get A/D filter: -9.255963e+061 result=40 16:08:13 Get A/D value=-858993460 result=40 16:08:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:13 Parameters OK 16:08:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:13 Set A/D data flow result=40 16:08:13 Set A/D channel type result=40 16:08:13 Set A/D encoding result=40 16:08:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:13 Set channel filter=0.000000e+000 result=40 16:08:13 Config A/D Result=40 16:08:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:13 Get A/D filter: -9.255963e+061 result=40 16:08:13 Get A/D value=-858993460 result=40 16:08:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:08:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:08:13 Aux= 16:08:13 Message to Camera, serial 147887 queued 16:08:49 Received message from Master: op=PointingHead serial=147900 16:08:49 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:08:49 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:08:50 Point started: ret=0 16:08:50 point_skyscan result=0 16:08:51 Check angles 16:08:51 SkyScan query 16:08:51 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 16:08:51 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 16:08:51 Check angles 16:08:51 SkyScan query 16:08:52 SkyScan query done: ret=0 az=81.915<-5461 ze=66.495<-7567 Statuses=0009 0008 16:08:52 Msec=750 True Az=81.915 Ze=66.495 Az status=0009 Ze status=0008 16:08:52 Check angles 16:08:52 SkyScan query 16:08:53 SkyScan query done: ret=0 az=99.42<-6628 ze=66.495<-7567 Statuses=0009 0008 16:08:53 Msec=1500 True Az=99.42 Ze=66.495 Az status=0009 Ze status=0008 16:08:53 Check angles 16:08:53 SkyScan query 16:08:53 SkyScan query done: ret=0 az=117.3<-7820 ze=66.495<-7567 Statuses=0009 0008 16:08:53 Msec=2250 True Az=117.3 Ze=66.495 Az status=0009 Ze status=0008 16:08:54 Check angles 16:08:54 SkyScan query 16:08:54 SkyScan query done: ret=0 az=135.075<-9005 ze=66.495<-7567 Statuses=0009 0008 16:08:54 Msec=3000 True Az=135.075 Ze=66.495 Az status=0009 Ze status=0008 16:08:54 Check angles 16:08:54 SkyScan query 16:08:55 SkyScan query done: ret=0 az=152.88<-10192 ze=66.495<-7567 Statuses=0009 0008 16:08:55 Msec=3750 True Az=152.88 Ze=66.495 Az status=0009 Ze status=0008 16:08:55 Check angles 16:08:55 SkyScan query 16:08:56 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:08:56 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:08:56 Message to Master queued w/err=0: serial=147900 error=0 16:09:01 Received message from Master: op=Filter serial=147901 16:09:01 Color wheel filter change from 0 to 0 16:09:01 FLIGetFilterPos err=0 currentPosition=0 16:09:01 FLIGetStepsRemaining err=0 RemainingSteps=0 16:09:01 Filter is already there-color wheel unchanged 16:09:01 Received message from Master: op=Shutter serial=147902 16:09:01 Shutter LASER close 16:09:01 Received message from Camera: op=State serial=147904 16:09:01 GetSingleValue result=40 Value=cccccccc 16:09:01 SkyScan query 16:09:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:09:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:02 Parameters OK 16:09:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:02 Set A/D data flow result=40 16:09:02 Set A/D channel type result=40 16:09:02 Set A/D encoding result=40 16:09:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:02 Set channel filter=0.000000e+000 result=40 16:09:02 Config A/D Result=40 16:09:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:02 Get A/D filter: -9.255963e+061 result=40 16:09:02 Get A/D value=-858993460 result=40 16:09:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:02 Parameters OK 16:09:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:02 Set A/D data flow result=40 16:09:02 Set A/D channel type result=40 16:09:02 Set A/D encoding result=40 16:09:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:02 Set channel filter=0.000000e+000 result=40 16:09:02 Config A/D Result=40 16:09:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:02 Get A/D filter: -9.255963e+061 result=40 16:09:02 Get A/D value=-858993460 result=40 16:09:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:02 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:09:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:09:02 Aux= 16:09:02 Message to Camera, serial 147904 queued 16:09:38 Received message from Master: op=PointingHead serial=147917 16:09:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:09:38 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:09:39 Point started: ret=0 16:09:39 point_skyscan result=0 16:09:39 Check angles 16:09:39 SkyScan query 16:09:40 SkyScan query done: ret=0 az=135.075<-9005 ze=36.9<-9540 Statuses=0009 0009 16:09:40 Msec=0 True Az=135.075 Ze=36.9 Az status=0009 Ze status=0009 16:09:40 Check angles 16:09:40 SkyScan query 16:09:41 SkyScan query done: ret=0 az=117.525<-7835 ze=15.945<-10937 Statuses=0009 0009 16:09:41 Msec=750 True Az=117.525 Ze=15.945 Az status=0009 Ze status=0009 16:09:41 Check angles 16:09:41 SkyScan query 16:09:42 SkyScan query done: ret=0 az=100.17<-6678 ze=-4.98<-12332 Statuses=0009 0009 16:09:42 Msec=1500 True Az=100.17 Ze=-4.98 Az status=0009 Ze status=0009 16:09:42 Check angles 16:09:42 SkyScan query 16:09:42 SkyScan query done: ret=0 az=82.635<-5509 ze=-25.965<-13731 Statuses=0009 0009 16:09:42 Msec=2250 True Az=82.635 Ze=-25.965 Az status=0009 Ze status=0009 16:09:42 Check angles 16:09:42 SkyScan query 16:09:43 SkyScan query done: ret=0 az=65.16<-4344 ze=-38.595<-14573 Statuses=0009 0008 16:09:43 Msec=3000 True Az=65.16 Ze=-38.595 Az status=0009 Ze status=0008 16:09:43 Check angles 16:09:43 SkyScan query 16:09:44 SkyScan query done: ret=0 az=47.685<-3179 ze=-38.52<-14568 Statuses=0009 0008 16:09:44 Msec=3750 True Az=47.685 Ze=-38.52 Az status=0009 Ze status=0008 16:09:44 Check angles 16:09:44 SkyScan query 16:09:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:09:45 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:09:45 Message to Master queued w/err=0: serial=147917 error=0 16:09:50 Received message from Master: op=Filter serial=147918 16:09:50 Color wheel filter change from 0 to 0 16:09:50 FLIGetFilterPos err=0 currentPosition=0 16:09:50 FLIGetStepsRemaining err=0 RemainingSteps=0 16:09:50 Filter is already there-color wheel unchanged 16:09:50 Received message from Master: op=Shutter serial=147919 16:09:50 Shutter LASER close 16:09:50 Received message from Camera: op=State serial=147921 16:09:50 GetSingleValue result=40 Value=cccccccc 16:09:50 SkyScan query 16:09:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:09:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:50 Parameters OK 16:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:50 Set A/D data flow result=40 16:09:50 Set A/D channel type result=40 16:09:50 Set A/D encoding result=40 16:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:50 Set channel filter=0.000000e+000 result=40 16:09:50 Config A/D Result=40 16:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:50 Get A/D filter: -9.255963e+061 result=40 16:09:50 Get A/D value=-858993460 result=40 16:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:50 Parameters OK 16:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:50 Set A/D data flow result=40 16:09:50 Set A/D channel type result=40 16:09:50 Set A/D encoding result=40 16:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:50 Set channel filter=0.000000e+000 result=40 16:09:50 Config A/D Result=40 16:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:50 Get A/D filter: -9.255963e+061 result=40 16:09:50 Get A/D value=-858993460 result=40 16:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:09:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:09:50 Aux= 16:09:50 Message to Camera, serial 147921 queued 16:10:27 Received message from Master: op=PointingHead serial=147934 16:10:27 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:10:27 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:10:27 Point started: ret=0 16:10:27 point_skyscan result=0 16:10:28 Check angles 16:10:28 SkyScan query 16:10:29 SkyScan query done: ret=0 az=64.335<-4289 ze=-68.715<-16581 Statuses=0009 0009 16:10:29 Msec=0 True Az=64.335 Ze=-68.715 Az status=0009 Ze status=0009 16:10:29 Check angles 16:10:29 SkyScan query 16:10:30 SkyScan query done: ret=0 az=82.275<-5485 ze=-90.075<-18005 Statuses=0009 0009 16:10:30 Msec=750 True Az=82.275 Ze=-90.075 Az status=0009 Ze status=0009 16:10:30 Check angles 16:10:30 SkyScan query 16:10:30 SkyScan query done: ret=0 az=99.6<-6640 ze=-111.045<-19403 Statuses=0009 0009 16:10:30 Msec=1500 True Az=99.6 Ze=-111.045 Az status=0009 Ze status=0009 16:10:31 Check angles 16:10:31 SkyScan query 16:10:31 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.97<-20798 Statuses=0009 0009 16:10:31 Msec=2250 True Az=117.105 Ze=-131.97 Az status=0009 Ze status=0009 16:10:31 Check angles 16:10:31 SkyScan query 16:10:32 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 16:10:32 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 16:10:32 Check angles 16:10:32 SkyScan query 16:10:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 16:10:33 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 16:10:33 Message to Master queued w/err=0: serial=147934 error=0 16:10:38 Received message from Master: op=Filter serial=147935 16:10:38 Color wheel filter change from 0 to 0 16:10:38 FLIGetFilterPos err=0 currentPosition=0 16:10:38 FLIGetStepsRemaining err=0 RemainingSteps=0 16:10:38 Filter is already there-color wheel unchanged 16:10:38 Received message from Master: op=Shutter serial=147936 16:10:38 Shutter LASER close 16:10:38 Received message from Camera: op=State serial=147938 16:10:38 GetSingleValue result=40 Value=cccccccc 16:10:38 SkyScan query 16:10:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:10:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:38 Parameters OK 16:10:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:38 Set A/D data flow result=40 16:10:38 Set A/D channel type result=40 16:10:38 Set A/D encoding result=40 16:10:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:38 Set channel filter=0.000000e+000 result=40 16:10:38 Config A/D Result=40 16:10:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:38 Get A/D filter: -9.255963e+061 result=40 16:10:38 Get A/D value=-858993460 result=40 16:10:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:38 Parameters OK 16:10:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:38 Set A/D data flow result=40 16:10:38 Set A/D channel type result=40 16:10:38 Set A/D encoding result=40 16:10:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:38 Set channel filter=0.000000e+000 result=40 16:10:38 Config A/D Result=40 16:10:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:38 Get A/D filter: -9.255963e+061 result=40 16:10:38 Get A/D value=-858993460 result=40 16:10:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:10:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:10:38 Aux= 16:10:38 Message to Camera, serial 147938 queued 16:11:14 Received message from Master: op=PointingHead serial=147950 16:11:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:11:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:11:15 Point started: ret=0 16:11:15 point_skyscan result=0 16:11:15 Check angles 16:11:15 SkyScan query 16:11:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 16:11:16 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 16:11:16 Check angles 16:11:16 SkyScan query 16:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:11:17 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:11:17 Message to Master queued w/err=0: serial=147950 error=0 16:11:22 Received message from Master: op=Filter serial=147951 16:11:22 Color wheel filter change from 0 to 0 16:11:22 FLIGetFilterPos err=0 currentPosition=0 16:11:22 FLIGetStepsRemaining err=0 RemainingSteps=0 16:11:22 Filter is already there-color wheel unchanged 16:11:22 Received message from Master: op=Shutter serial=147952 16:11:22 Shutter LASER open 16:11:22 Received message from Camera: op=State serial=147954 16:11:22 GetSingleValue result=40 Value=cccccccc 16:11:22 SkyScan query 16:11:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:11:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:23 Parameters OK 16:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:23 Set A/D data flow result=40 16:11:23 Set A/D channel type result=40 16:11:23 Set A/D encoding result=40 16:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:23 Set channel filter=0.000000e+000 result=40 16:11:23 Config A/D Result=40 16:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:23 Get A/D filter: -9.255963e+061 result=40 16:11:23 Get A/D value=-858993460 result=40 16:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:23 Parameters OK 16:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:23 Set A/D data flow result=40 16:11:23 Set A/D channel type result=40 16:11:23 Set A/D encoding result=40 16:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:23 Set channel filter=0.000000e+000 result=40 16:11:23 Config A/D Result=40 16:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:23 Get A/D filter: -9.255963e+061 result=40 16:11:23 Get A/D value=-858993460 result=40 16:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:11:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:11:23 Aux= 16:11:23 Message to Camera, serial 147954 queued 16:11:31 Received message from Master: op=Shutter serial=147964 16:11:31 Shutter LASER close 16:11:32 Received message from Master: op=PointingHead serial=147968 16:11:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:11:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:11:32 Point started: ret=0 16:11:32 point_skyscan result=0 16:11:33 Check angles 16:11:33 SkyScan query 16:11:33 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.52<-21568 Statuses=0009 0009 16:11:33 Msec=0 True Az=135.705 Ze=-143.52 Az status=0009 Ze status=0009 16:11:34 Check angles 16:11:34 SkyScan query 16:11:34 SkyScan query done: ret=0 az=153.195<-10213 ze=-122.565<-20171 Statuses=0009 0009 16:11:34 Msec=750 True Az=153.195 Ze=-122.565 Az status=0009 Ze status=0009 16:11:34 Check angles 16:11:34 SkyScan query 16:11:35 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.19<-18746 Statuses=0009 0009 16:11:35 Msec=1500 True Az=171.105 Ze=-101.19 Az status=0009 Ze status=0009 16:11:35 Check angles 16:11:35 SkyScan query 16:11:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.8<-17320 Statuses=0008 0009 16:11:36 Msec=2250 True Az=176.01 Ze=-79.8 Az status=0008 Ze status=0009 16:11:36 Check angles 16:11:36 SkyScan query 16:11:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.83<-15922 Statuses=0008 0009 16:11:36 Msec=3000 True Az=176.01 Ze=-58.83 Az status=0008 Ze status=0009 16:11:37 Check angles 16:11:37 SkyScan query 16:11:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:11:37 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:11:37 Message to Master queued w/err=0: serial=147968 error=0 16:11:42 Received message from Master: op=Filter serial=147969 16:11:42 Color wheel filter change from 0 to 0 16:11:42 FLIGetFilterPos err=0 currentPosition=0 16:11:42 FLIGetStepsRemaining err=0 RemainingSteps=0 16:11:42 Filter is already there-color wheel unchanged 16:11:42 Received message from Master: op=Shutter serial=147970 16:11:42 Shutter LASER close 16:11:43 Received message from Camera: op=State serial=147972 16:11:43 GetSingleValue result=40 Value=cccccccc 16:11:43 SkyScan query 16:11:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:11:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:43 Parameters OK 16:11:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:43 Set A/D data flow result=40 16:11:43 Set A/D channel type result=40 16:11:43 Set A/D encoding result=40 16:11:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:43 Set channel filter=0.000000e+000 result=40 16:11:43 Config A/D Result=40 16:11:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:43 Get A/D filter: -9.255963e+061 result=40 16:11:43 Get A/D value=-858993460 result=40 16:11:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:43 Parameters OK 16:11:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:43 Set A/D data flow result=40 16:11:43 Set A/D channel type result=40 16:11:43 Set A/D encoding result=40 16:11:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:43 Set channel filter=0.000000e+000 result=40 16:11:43 Config A/D Result=40 16:11:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:43 Get A/D filter: -9.255963e+061 result=40 16:11:43 Get A/D value=-858993460 result=40 16:11:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:11:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:11:43 Aux= 16:11:43 Message to Camera, serial 147972 queued 16:12:19 Received message from Master: op=PointingHead serial=147984 16:12:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:12:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:12:19 Point started: ret=0 16:12:19 point_skyscan result=0 16:12:20 Check angles 16:12:20 SkyScan query 16:12:21 SkyScan query done: ret=0 az=152.595<-10173 ze=-21.195<-13413 Statuses=0009 0009 16:12:21 Msec=0 True Az=152.595 Ze=-21.195 Az status=0009 Ze status=0009 16:12:21 Check angles 16:12:21 SkyScan query 16:12:21 SkyScan query done: ret=0 az=134.58<-8972 ze=0.165<-11989 Statuses=0009 0009 16:12:21 Msec=750 True Az=134.58 Ze=0.165 Az status=0009 Ze status=0009 16:12:22 Check angles 16:12:22 SkyScan query 16:12:22 SkyScan query done: ret=0 az=117.27<-7818 ze=21.18<-10588 Statuses=0009 0009 16:12:22 Msec=1500 True Az=117.27 Ze=21.18 Az status=0009 Ze status=0009 16:12:22 Check angles 16:12:22 SkyScan query 16:12:23 SkyScan query done: ret=0 az=99.84<-6656 ze=42.075<-9195 Statuses=0009 0009 16:12:23 Msec=2250 True Az=99.84 Ze=42.075 Az status=0009 Ze status=0009 16:12:23 Check angles 16:12:23 SkyScan query 16:12:24 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:12:24 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:12:24 Check angles 16:12:24 SkyScan query 16:12:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:12:24 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:12:24 Message to Master queued w/err=0: serial=147984 error=0 16:12:29 Received message from Master: op=Filter serial=147985 16:12:29 Color wheel filter change from 0 to 0 16:12:29 FLIGetFilterPos err=0 currentPosition=0 16:12:29 FLIGetStepsRemaining err=0 RemainingSteps=0 16:12:29 Filter is already there-color wheel unchanged 16:12:30 Received message from Master: op=Shutter serial=147986 16:12:30 Shutter LASER close 16:12:30 Received message from Camera: op=State serial=147988 16:12:30 GetSingleValue result=40 Value=cccccccc 16:12:30 SkyScan query 16:12:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:12:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:30 Parameters OK 16:12:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:30 Set A/D data flow result=40 16:12:30 Set A/D channel type result=40 16:12:30 Set A/D encoding result=40 16:12:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:30 Set channel filter=0.000000e+000 result=40 16:12:30 Config A/D Result=40 16:12:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:30 Get A/D filter: -9.255963e+061 result=40 16:12:30 Get A/D value=-858993460 result=40 16:12:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:30 Parameters OK 16:12:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:30 Set A/D data flow result=40 16:12:30 Set A/D channel type result=40 16:12:30 Set A/D encoding result=40 16:12:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:30 Set channel filter=0.000000e+000 result=40 16:12:30 Config A/D Result=40 16:12:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:30 Get A/D filter: -9.255963e+061 result=40 16:12:30 Get A/D value=-858993460 result=40 16:12:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:12:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:12:30 Aux= 16:12:30 Message to Camera, serial 147988 queued 16:13:07 Received message from Master: op=PointingHead serial=148001 16:13:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:13:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:13:07 Point started: ret=0 16:13:07 point_skyscan result=0 16:13:08 Check angles 16:13:08 SkyScan query 16:13:09 SkyScan query done: ret=0 az=108.72<-7248 ze=38.475<-9435 Statuses=0009 0008 16:13:09 Msec=0 True Az=108.72 Ze=38.475 Az status=0009 Ze status=0008 16:13:09 Check angles 16:13:09 SkyScan query 16:13:10 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 16:13:10 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 16:13:10 Check angles 16:13:10 SkyScan query 16:13:10 SkyScan query done: ret=0 az=143.805<-9587 ze=38.505<-9433 Statuses=0009 0008 16:13:10 Msec=1500 True Az=143.805 Ze=38.505 Az status=0009 Ze status=0008 16:13:10 Check angles 16:13:10 SkyScan query 16:13:11 SkyScan query done: ret=0 az=161.16<-10744 ze=38.505<-9433 Statuses=0009 0008 16:13:11 Msec=2250 True Az=161.16 Ze=38.505 Az status=0009 Ze status=0008 16:13:11 Check angles 16:13:11 SkyScan query 16:13:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:13:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:13:12 Check angles 16:13:12 SkyScan query 16:13:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:13:13 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:13:13 Message to Master queued w/err=0: serial=148001 error=0 16:13:18 Received message from Master: op=Filter serial=148002 16:13:18 Color wheel filter change from 0 to 0 16:13:18 FLIGetFilterPos err=0 currentPosition=0 16:13:18 FLIGetStepsRemaining err=0 RemainingSteps=0 16:13:18 Filter is already there-color wheel unchanged 16:13:18 Received message from Master: op=Shutter serial=148003 16:13:18 Shutter LASER close 16:13:18 Received message from Camera: op=State serial=148005 16:13:18 GetSingleValue result=40 Value=cccccccc 16:13:18 SkyScan query 16:13:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:13:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:18 Parameters OK 16:13:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:18 Set A/D data flow result=40 16:13:18 Set A/D channel type result=40 16:13:18 Set A/D encoding result=40 16:13:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:18 Set channel filter=0.000000e+000 result=40 16:13:18 Config A/D Result=40 16:13:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:18 Get A/D filter: -9.255963e+061 result=40 16:13:18 Get A/D value=-858993460 result=40 16:13:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:18 Parameters OK 16:13:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:18 Set A/D data flow result=40 16:13:18 Set A/D channel type result=40 16:13:18 Set A/D encoding result=40 16:13:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:18 Set channel filter=0.000000e+000 result=40 16:13:18 Config A/D Result=40 16:13:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:18 Get A/D filter: -9.255963e+061 result=40 16:13:18 Get A/D value=-858993460 result=40 16:13:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:13:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:13:18 Aux= 16:13:18 Message to Camera, serial 148005 queued 16:13:55 Received message from Master: op=PointingHead serial=148018 16:13:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:13:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:13:55 Point started: ret=0 16:13:55 point_skyscan result=0 16:13:56 Check angles 16:13:56 SkyScan query 16:13:57 SkyScan query done: ret=0 az=153.12<-10208 ze=8.91<-11406 Statuses=0009 0009 16:13:57 Msec=0 True Az=153.12 Ze=8.91 Az status=0009 Ze status=0009 16:13:57 Check angles 16:13:57 SkyScan query 16:13:58 SkyScan query done: ret=0 az=135.675<-9045 ze=-12.105<-12807 Statuses=0009 0009 16:13:58 Msec=750 True Az=135.675 Ze=-12.105 Az status=0009 Ze status=0009 16:13:58 Check angles 16:13:58 SkyScan query 16:13:58 SkyScan query done: ret=0 az=118.2<-7880 ze=-33.015<-14201 Statuses=0009 0009 16:13:58 Msec=1500 True Az=118.2 Ze=-33.015 Az status=0009 Ze status=0009 16:13:58 Check angles 16:13:58 SkyScan query 16:13:59 SkyScan query done: ret=0 az=100.77<-6718 ze=-51.525<-15435 Statuses=0009 0009 16:13:59 Msec=2250 True Az=100.77 Ze=-51.525 Az status=0009 Ze status=0009 16:13:59 Check angles 16:13:59 SkyScan query 16:14:00 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 16:14:00 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 16:14:00 Check angles 16:14:00 SkyScan query 16:14:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:14:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:14:01 Message to Master queued w/err=0: serial=148018 error=0 16:14:06 Received message from Master: op=Filter serial=148019 16:14:06 Color wheel filter change from 0 to 0 16:14:06 FLIGetFilterPos err=0 currentPosition=0 16:14:06 FLIGetStepsRemaining err=0 RemainingSteps=0 16:14:06 Filter is already there-color wheel unchanged 16:14:06 Received message from Master: op=Shutter serial=148020 16:14:06 Shutter LASER close 16:14:06 Received message from Camera: op=State serial=148022 16:14:06 GetSingleValue result=40 Value=cccccccc 16:14:06 SkyScan query 16:14:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:14:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:06 Parameters OK 16:14:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:06 Set A/D data flow result=40 16:14:06 Set A/D channel type result=40 16:14:06 Set A/D encoding result=40 16:14:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:06 Set channel filter=0.000000e+000 result=40 16:14:06 Config A/D Result=40 16:14:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:06 Get A/D filter: -9.255963e+061 result=40 16:14:06 Get A/D value=-858993460 result=40 16:14:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:06 Parameters OK 16:14:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:06 Set A/D data flow result=40 16:14:06 Set A/D channel type result=40 16:14:06 Set A/D encoding result=40 16:14:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:06 Set channel filter=0.000000e+000 result=40 16:14:06 Config A/D Result=40 16:14:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:06 Get A/D filter: -9.255963e+061 result=40 16:14:06 Get A/D value=-858993460 result=40 16:14:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:14:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:14:06 Aux= 16:14:06 Message to Camera, serial 148022 queued 16:14:43 Received message from Master: op=PointingHead serial=148035 16:14:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:14:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:14:44 Point started: ret=0 16:14:44 point_skyscan result=0 16:14:44 Check angles 16:14:44 SkyScan query 16:14:45 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.12<-17408 Statuses=0009 0009 16:14:45 Msec=0 True Az=108.855 Ze=-81.12 Az status=0009 Ze status=0009 16:14:45 Check angles 16:14:45 SkyScan query 16:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.09<-18806 Statuses=0008 0009 16:14:46 Msec=750 True Az=112.995 Ze=-102.09 Az status=0008 Ze status=0009 16:14:46 Check angles 16:14:46 SkyScan query 16:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.015<-20201 Statuses=0008 0009 16:14:46 Msec=1500 True Az=112.995 Ze=-123.015 Az status=0008 Ze status=0009 16:14:47 Check angles 16:14:47 SkyScan query 16:14:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.97<-21598 Statuses=0008 0009 16:14:47 Msec=2250 True Az=112.995 Ze=-143.97 Az status=0008 Ze status=0009 16:14:47 Check angles 16:14:47 SkyScan query 16:14:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.955<-22997 Statuses=0008 0009 16:14:48 Msec=3000 True Az=112.995 Ze=-164.955 Az status=0008 Ze status=0009 16:14:48 Check angles 16:14:48 SkyScan query 16:14:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:14:49 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:14:49 Message to Master queued w/err=0: serial=148035 error=0 16:14:54 Received message from Master: op=Filter serial=148036 16:14:54 Color wheel filter change from 0 to 0 16:14:54 FLIGetFilterPos err=0 currentPosition=0 16:14:54 FLIGetStepsRemaining err=0 RemainingSteps=0 16:14:54 Filter is already there-color wheel unchanged 16:14:54 Received message from Master: op=Shutter serial=148037 16:14:54 Shutter LASER open 16:14:54 Received message from Camera: op=State serial=148039 16:14:54 GetSingleValue result=40 Value=cccccccc 16:14:54 SkyScan query 16:14:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:14:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:55 Parameters OK 16:14:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:55 Set A/D data flow result=40 16:14:55 Set A/D channel type result=40 16:14:55 Set A/D encoding result=40 16:14:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:55 Set channel filter=0.000000e+000 result=40 16:14:55 Config A/D Result=40 16:14:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:55 Get A/D filter: -9.255963e+061 result=40 16:14:55 Get A/D value=-858993460 result=40 16:14:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:55 Parameters OK 16:14:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:55 Set A/D data flow result=40 16:14:55 Set A/D channel type result=40 16:14:55 Set A/D encoding result=40 16:14:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:55 Set channel filter=0.000000e+000 result=40 16:14:55 Config A/D Result=40 16:14:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:55 Get A/D filter: -9.255963e+061 result=40 16:14:55 Get A/D value=-858993460 result=40 16:14:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:14:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:14:55 Aux= 16:14:55 Message to Camera, serial 148039 queued 16:15:03 Received message from Master: op=Shutter serial=148049 16:15:03 Shutter LASER close 16:15:03 Received message from Master: op=PointingHead serial=148053 16:15:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:15:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:15:04 Point started: ret=0 16:15:04 point_skyscan result=0 16:15:05 Check angles 16:15:05 SkyScan query 16:15:05 SkyScan query done: ret=0 az=89.865<-5991 ze=157.14<-1524 Statuses=0009 0009 16:15:05 Msec=0 True Az=89.865 Ze=157.14 Az status=0009 Ze status=0009 16:15:05 Check angles 16:15:05 SkyScan query 16:15:06 SkyScan query done: ret=0 az=71.91<-4794 ze=135.765<-2949 Statuses=0009 0009 16:15:06 Msec=750 True Az=71.91 Ze=135.765 Az status=0009 Ze status=0009 16:15:06 Check angles 16:15:06 SkyScan query 16:15:07 SkyScan query done: ret=0 az=54.555<-3637 ze=114.765<-4349 Statuses=0009 0009 16:15:07 Msec=1500 True Az=54.555 Ze=114.765 Az status=0009 Ze status=0009 16:15:07 Check angles 16:15:07 SkyScan query 16:15:07 SkyScan query done: ret=0 az=41.025<-2735 ze=93.84<-5744 Statuses=0009 0009 16:15:07 Msec=2250 True Az=41.025 Ze=93.84 Az status=0009 Ze status=0009 16:15:08 Check angles 16:15:08 SkyScan query 16:15:08 SkyScan query done: ret=0 az=40.995<-2733 ze=72.885<-7141 Statuses=0008 0009 16:15:08 Msec=3000 True Az=40.995 Ze=72.885 Az status=0008 Ze status=0009 16:15:08 Check angles 16:15:08 SkyScan query 16:15:09 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 16:15:09 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 16:15:09 Check angles 16:15:09 SkyScan query 16:15:10 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 16:15:10 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 16:15:10 Message to Master queued w/err=0: serial=148053 error=0 16:15:15 Received message from Master: op=Filter serial=148054 16:15:15 Color wheel filter change from 0 to 0 16:15:15 FLIGetFilterPos err=0 currentPosition=0 16:15:15 FLIGetStepsRemaining err=0 RemainingSteps=0 16:15:15 Filter is already there-color wheel unchanged 16:15:15 Received message from Master: op=Shutter serial=148055 16:15:15 Shutter LASER close 16:15:15 Received message from Camera: op=State serial=148057 16:15:15 GetSingleValue result=40 Value=cccccccc 16:15:15 SkyScan query 16:15:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:15:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:16 Parameters OK 16:15:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:16 Set A/D data flow result=40 16:15:16 Set A/D channel type result=40 16:15:16 Set A/D encoding result=40 16:15:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:16 Set channel filter=0.000000e+000 result=40 16:15:16 Config A/D Result=40 16:15:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:16 Get A/D filter: -9.255963e+061 result=40 16:15:16 Get A/D value=-858993460 result=40 16:15:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:16 Parameters OK 16:15:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:16 Set A/D data flow result=40 16:15:16 Set A/D channel type result=40 16:15:16 Set A/D encoding result=40 16:15:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:16 Set channel filter=0.000000e+000 result=40 16:15:16 Config A/D Result=40 16:15:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:16 Get A/D filter: -9.255963e+061 result=40 16:15:16 Get A/D value=-858993460 result=40 16:15:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:15:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:15:16 Aux= 16:15:16 Message to Camera, serial 148057 queued 16:15:27 Received message from Master: op=Identify serial=148058 [UTC 2018-12-14 16:15:52] 16:15:52 Received message from Master: op=PointingHead serial=148073 16:15:52 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:15:52 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:15:53 Point started: ret=0 16:15:53 point_skyscan result=0 16:15:54 Check angles 16:15:54 SkyScan query 16:15:54 SkyScan query done: ret=0 az=64.245<-4283 ze=66.54<-7564 Statuses=0009 0008 16:15:54 Msec=0 True Az=64.245 Ze=66.54 Az status=0009 Ze status=0008 16:15:54 Check angles 16:15:54 SkyScan query 16:15:55 SkyScan query done: ret=0 az=81.765<-5451 ze=66.51<-7566 Statuses=0009 0008 16:15:55 Msec=750 True Az=81.765 Ze=66.51 Az status=0009 Ze status=0008 16:15:55 Check angles 16:15:55 SkyScan query 16:15:56 SkyScan query done: ret=0 az=99.27<-6618 ze=66.495<-7567 Statuses=0009 0008 16:15:56 Msec=1500 True Az=99.27 Ze=66.495 Az status=0009 Ze status=0008 16:15:56 Check angles 16:15:56 SkyScan query 16:15:56 SkyScan query done: ret=0 az=116.73<-7782 ze=66.495<-7567 Statuses=0009 0008 16:15:56 Msec=2250 True Az=116.73 Ze=66.495 Az status=0009 Ze status=0008 16:15:57 Check angles 16:15:57 SkyScan query 16:15:57 SkyScan query done: ret=0 az=134.25<-8950 ze=66.495<-7567 Statuses=0009 0008 16:15:57 Msec=3000 True Az=134.25 Ze=66.495 Az status=0009 Ze status=0008 16:15:57 Check angles 16:15:57 SkyScan query 16:15:58 SkyScan query done: ret=0 az=151.695<-10113 ze=66.495<-7567 Statuses=0009 0008 16:15:58 Msec=3750 True Az=151.695 Ze=66.495 Az status=0009 Ze status=0008 16:15:58 Check angles 16:15:58 SkyScan query 16:15:59 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:15:59 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:15:59 Message to Master queued w/err=0: serial=148073 error=0 16:16:04 Received message from Master: op=Filter serial=148074 16:16:04 Color wheel filter change from 0 to 0 16:16:04 FLIGetFilterPos err=0 currentPosition=0 16:16:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:16:04 Filter is already there-color wheel unchanged 16:16:04 Received message from Master: op=Shutter serial=148075 16:16:04 Shutter LASER close 16:16:04 Received message from Camera: op=State serial=148077 16:16:04 GetSingleValue result=40 Value=cccccccc 16:16:04 SkyScan query 16:16:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:16:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:04 Parameters OK 16:16:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:04 Set A/D data flow result=40 16:16:04 Set A/D channel type result=40 16:16:04 Set A/D encoding result=40 16:16:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:04 Set channel filter=0.000000e+000 result=40 16:16:04 Config A/D Result=40 16:16:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:04 Get A/D filter: -9.255963e+061 result=40 16:16:04 Get A/D value=-858993460 result=40 16:16:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:04 Parameters OK 16:16:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:04 Set A/D data flow result=40 16:16:04 Set A/D channel type result=40 16:16:04 Set A/D encoding result=40 16:16:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:04 Set channel filter=0.000000e+000 result=40 16:16:04 Config A/D Result=40 16:16:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:04 Get A/D filter: -9.255963e+061 result=40 16:16:04 Get A/D value=-858993460 result=40 16:16:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:16:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:16:04 Aux= 16:16:04 Message to Camera, serial 148077 queued 16:16:41 Received message from Master: op=PointingHead serial=148090 16:16:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:16:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:16:42 Point started: ret=0 16:16:42 point_skyscan result=0 16:16:42 Check angles 16:16:42 SkyScan query 16:16:43 SkyScan query done: ret=0 az=134.79<-8986 ze=36.675<-9555 Statuses=0009 0009 16:16:43 Msec=0 True Az=134.79 Ze=36.675 Az status=0009 Ze status=0009 16:16:43 Check angles 16:16:43 SkyScan query 16:16:44 SkyScan query done: ret=0 az=117<-7800 ze=15.195<-10987 Statuses=0009 0009 16:16:44 Msec=750 True Az=117 Ze=15.195 Az status=0009 Ze status=0009 16:16:44 Check angles 16:16:44 SkyScan query 16:16:44 SkyScan query done: ret=0 az=99.21<-6614 ze=-6.195<-12413 Statuses=0009 0009 16:16:44 Msec=1500 True Az=99.21 Ze=-6.195 Az status=0009 Ze status=0009 16:16:45 Check angles 16:16:45 SkyScan query 16:16:45 SkyScan query done: ret=0 az=81.675<-5445 ze=-27.15<-13810 Statuses=0009 0009 16:16:45 Msec=2250 True Az=81.675 Ze=-27.15 Az status=0009 Ze status=0009 16:16:45 Check angles 16:16:45 SkyScan query 16:16:46 SkyScan query done: ret=0 az=63.9<-4260 ze=-38.595<-14573 Statuses=0009 0008 16:16:46 Msec=3000 True Az=63.9 Ze=-38.595 Az status=0009 Ze status=0008 16:16:46 Check angles 16:16:46 SkyScan query 16:16:47 SkyScan query done: ret=0 az=46.125<-3075 ze=-38.52<-14568 Statuses=0009 0008 16:16:47 Msec=3750 True Az=46.125 Ze=-38.52 Az status=0009 Ze status=0008 16:16:47 Check angles 16:16:47 SkyScan query 16:16:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:16:47 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:16:47 Message to Master queued w/err=0: serial=148090 error=0 16:16:52 Received message from Master: op=Filter serial=148091 16:16:52 Color wheel filter change from 0 to 0 16:16:52 FLIGetFilterPos err=0 currentPosition=0 16:16:52 FLIGetStepsRemaining err=0 RemainingSteps=0 16:16:52 Filter is already there-color wheel unchanged 16:16:53 Received message from Master: op=Shutter serial=148092 16:16:53 Shutter LASER close 16:16:53 Received message from Camera: op=State serial=148094 16:16:53 GetSingleValue result=40 Value=cccccccc 16:16:53 SkyScan query 16:16:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:16:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:53 Parameters OK 16:16:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:53 Set A/D data flow result=40 16:16:53 Set A/D channel type result=40 16:16:53 Set A/D encoding result=40 16:16:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:53 Set channel filter=0.000000e+000 result=40 16:16:53 Config A/D Result=40 16:16:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:53 Get A/D filter: -9.255963e+061 result=40 16:16:53 Get A/D value=-858993460 result=40 16:16:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:53 Parameters OK 16:16:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:53 Set A/D data flow result=40 16:16:53 Set A/D channel type result=40 16:16:53 Set A/D encoding result=40 16:16:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:53 Set channel filter=0.000000e+000 result=40 16:16:53 Config A/D Result=40 16:16:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:53 Get A/D filter: -9.255963e+061 result=40 16:16:53 Get A/D value=-858993460 result=40 16:16:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:16:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:16:53 Aux= 16:16:53 Message to Camera, serial 148094 queued 16:17:29 Received message from Master: op=PointingHead serial=148106 16:17:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:17:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:17:30 Point started: ret=0 16:17:30 point_skyscan result=0 16:17:30 Check angles 16:17:30 SkyScan query 16:17:31 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.1<-16540 Statuses=0009 0009 16:17:31 Msec=0 True Az=63.885 Ze=-68.1 Az status=0009 Ze status=0009 16:17:31 Check angles 16:17:31 SkyScan query 16:17:32 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.535<-17969 Statuses=0009 0009 16:17:32 Msec=750 True Az=81.84 Ze=-89.535 Az status=0009 Ze status=0009 16:17:32 Check angles 16:17:32 SkyScan query 16:17:32 SkyScan query done: ret=0 az=99.24<-6616 ze=-110.49<-19366 Statuses=0009 0009 16:17:32 Msec=1500 True Az=99.24 Ze=-110.49 Az status=0009 Ze status=0009 16:17:33 Check angles 16:17:33 SkyScan query 16:17:33 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.4<-20760 Statuses=0009 0009 16:17:33 Msec=2250 True Az=116.715 Ze=-131.4 Az status=0009 Ze status=0009 16:17:33 Check angles 16:17:33 SkyScan query 16:17:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 16:17:34 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 16:17:34 Check angles 16:17:34 SkyScan query 16:17:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 16:17:35 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 16:17:35 Message to Master queued w/err=0: serial=148106 error=0 16:17:40 Received message from Master: op=Filter serial=148107 16:17:40 Color wheel filter change from 0 to 0 16:17:40 FLIGetFilterPos err=0 currentPosition=0 16:17:40 FLIGetStepsRemaining err=0 RemainingSteps=0 16:17:40 Filter is already there-color wheel unchanged 16:17:40 Received message from Master: op=Shutter serial=148108 16:17:40 Shutter LASER close 16:17:40 Received message from Camera: op=State serial=148110 16:17:40 GetSingleValue result=40 Value=cccccccc 16:17:40 SkyScan query 16:17:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:17:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:40 Parameters OK 16:17:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:40 Set A/D data flow result=40 16:17:40 Set A/D channel type result=40 16:17:40 Set A/D encoding result=40 16:17:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:40 Set channel filter=0.000000e+000 result=40 16:17:40 Config A/D Result=40 16:17:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:40 Get A/D filter: -9.255963e+061 result=40 16:17:40 Get A/D value=-858993460 result=40 16:17:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:40 Parameters OK 16:17:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:40 Set A/D data flow result=40 16:17:40 Set A/D channel type result=40 16:17:40 Set A/D encoding result=40 16:17:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:40 Set channel filter=0.000000e+000 result=40 16:17:40 Config A/D Result=40 16:17:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:40 Get A/D filter: -9.255963e+061 result=40 16:17:40 Get A/D value=-858993460 result=40 16:17:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:17:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:17:40 Aux= 16:17:40 Message to Camera, serial 148110 queued 16:18:17 Received message from Master: op=PointingHead serial=148123 16:18:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:18:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:18:18 Point started: ret=0 16:18:18 point_skyscan result=0 16:18:18 Check angles 16:18:18 SkyScan query 16:18:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.15<-23410 Statuses=0009 0009 16:18:19 Msec=0 True Az=112.995 Ze=-171.15 Az status=0009 Ze status=0009 16:18:19 Check angles 16:18:19 SkyScan query 16:18:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:18:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:18:20 Message to Master queued w/err=0: serial=148123 error=0 16:18:25 Received message from Master: op=Filter serial=148124 16:18:25 Color wheel filter change from 0 to 0 16:18:25 FLIGetFilterPos err=0 currentPosition=0 16:18:25 FLIGetStepsRemaining err=0 RemainingSteps=0 16:18:25 Filter is already there-color wheel unchanged 16:18:25 Received message from Master: op=Shutter serial=148125 16:18:25 Shutter LASER open 16:18:25 Received message from Camera: op=State serial=148127 16:18:25 GetSingleValue result=40 Value=cccccccc 16:18:25 SkyScan query 16:18:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:18:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:26 Parameters OK 16:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:26 Set A/D data flow result=40 16:18:26 Set A/D channel type result=40 16:18:26 Set A/D encoding result=40 16:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:26 Set channel filter=0.000000e+000 result=40 16:18:26 Config A/D Result=40 16:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:26 Get A/D filter: -9.255963e+061 result=40 16:18:26 Get A/D value=-858993460 result=40 16:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:26 Parameters OK 16:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:26 Set A/D data flow result=40 16:18:26 Set A/D channel type result=40 16:18:26 Set A/D encoding result=40 16:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:26 Set channel filter=0.000000e+000 result=40 16:18:26 Config A/D Result=40 16:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:26 Get A/D filter: -9.255963e+061 result=40 16:18:26 Get A/D value=-858993460 result=40 16:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:18:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:18:26 Aux= 16:18:26 Message to Camera, serial 148127 queued 16:18:34 Received message from Master: op=Shutter serial=148137 16:18:34 Shutter LASER close 16:18:35 Received message from Master: op=PointingHead serial=148141 16:18:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:18:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:18:35 Point started: ret=0 16:18:35 point_skyscan result=0 16:18:36 Check angles 16:18:36 SkyScan query 16:18:36 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.205<-21547 Statuses=0009 0009 16:18:36 Msec=0 True Az=136.14 Ze=-143.205 Az status=0009 Ze status=0009 16:18:37 Check angles 16:18:37 SkyScan query 16:18:37 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.22<-20148 Statuses=0009 0009 16:18:37 Msec=750 True Az=153.51 Ze=-122.22 Az status=0009 Ze status=0009 16:18:37 Check angles 16:18:37 SkyScan query 16:18:38 SkyScan query done: ret=0 az=170.985<-11399 ze=-101.295<-18753 Statuses=0009 0009 16:18:38 Msec=1500 True Az=170.985 Ze=-101.295 Az status=0009 Ze status=0009 16:18:38 Check angles 16:18:38 SkyScan query 16:18:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.34<-17356 Statuses=0008 0009 16:18:39 Msec=2250 True Az=176.01 Ze=-80.34 Az status=0008 Ze status=0009 16:18:39 Check angles 16:18:39 SkyScan query 16:18:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.355<-15957 Statuses=0008 0009 16:18:39 Msec=3000 True Az=176.01 Ze=-59.355 Az status=0008 Ze status=0009 16:18:40 Check angles 16:18:40 SkyScan query 16:18:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:18:40 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:18:40 Message to Master queued w/err=0: serial=148141 error=0 16:18:45 Received message from Master: op=Filter serial=148142 16:18:45 Color wheel filter change from 0 to 0 16:18:45 FLIGetFilterPos err=0 currentPosition=0 16:18:45 FLIGetStepsRemaining err=0 RemainingSteps=0 16:18:45 Filter is already there-color wheel unchanged 16:18:45 Received message from Master: op=Shutter serial=148143 16:18:45 Shutter LASER close 16:18:45 Received message from Camera: op=State serial=148145 16:18:45 GetSingleValue result=40 Value=cccccccc 16:18:45 SkyScan query 16:18:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:18:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:46 Parameters OK 16:18:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:46 Set A/D data flow result=40 16:18:46 Set A/D channel type result=40 16:18:46 Set A/D encoding result=40 16:18:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:46 Set channel filter=0.000000e+000 result=40 16:18:46 Config A/D Result=40 16:18:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:46 Get A/D filter: -9.255963e+061 result=40 16:18:46 Get A/D value=-858993460 result=40 16:18:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:46 Parameters OK 16:18:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:46 Set A/D data flow result=40 16:18:46 Set A/D channel type result=40 16:18:46 Set A/D encoding result=40 16:18:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:46 Set channel filter=0.000000e+000 result=40 16:18:46 Config A/D Result=40 16:18:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:46 Get A/D filter: -9.255963e+061 result=40 16:18:46 Get A/D value=-858993460 result=40 16:18:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:18:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:18:46 Aux= 16:18:46 Message to Camera, serial 148145 queued 16:19:23 Received message from Master: op=PointingHead serial=148158 16:19:23 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:19:23 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:19:23 Point started: ret=0 16:19:23 point_skyscan result=0 16:19:24 Check angles 16:19:24 SkyScan query 16:19:25 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.825<-13455 Statuses=0009 0009 16:19:25 Msec=0 True Az=152.955 Ze=-21.825 Az status=0009 Ze status=0009 16:19:25 Check angles 16:19:25 SkyScan query 16:19:25 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.81<-12054 Statuses=0009 0009 16:19:25 Msec=750 True Az=135.585 Ze=-0.81 Az status=0009 Ze status=0009 16:19:25 Check angles 16:19:25 SkyScan query 16:19:26 SkyScan query done: ret=0 az=118.05<-7870 ze=20.115<-10659 Statuses=0009 0009 16:19:26 Msec=1500 True Az=118.05 Ze=20.115 Az status=0009 Ze status=0009 16:19:26 Check angles 16:19:26 SkyScan query 16:19:27 SkyScan query done: ret=0 az=100.695<-6713 ze=41.115<-9259 Statuses=0009 0009 16:19:27 Msec=2250 True Az=100.695 Ze=41.115 Az status=0009 Ze status=0009 16:19:27 Check angles 16:19:27 SkyScan query 16:19:28 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 16:19:28 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 16:19:28 Check angles 16:19:28 SkyScan query 16:19:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:19:28 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:19:28 Message to Master queued w/err=0: serial=148158 error=0 16:19:33 Received message from Master: op=Filter serial=148159 16:19:33 Color wheel filter change from 0 to 0 16:19:33 FLIGetFilterPos err=0 currentPosition=0 16:19:33 FLIGetStepsRemaining err=0 RemainingSteps=0 16:19:33 Filter is already there-color wheel unchanged 16:19:33 Received message from Master: op=Shutter serial=148160 16:19:33 Shutter LASER close 16:19:34 Received message from Camera: op=State serial=148162 16:19:34 GetSingleValue result=40 Value=cccccccc 16:19:34 SkyScan query 16:19:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:19:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:34 Parameters OK 16:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:34 Set A/D data flow result=40 16:19:34 Set A/D channel type result=40 16:19:34 Set A/D encoding result=40 16:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:34 Set channel filter=0.000000e+000 result=40 16:19:34 Config A/D Result=40 16:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:34 Get A/D filter: -9.255963e+061 result=40 16:19:34 Get A/D value=-858993460 result=40 16:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:34 Parameters OK 16:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:34 Set A/D data flow result=40 16:19:34 Set A/D channel type result=40 16:19:34 Set A/D encoding result=40 16:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:34 Set channel filter=0.000000e+000 result=40 16:19:34 Config A/D Result=40 16:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:34 Get A/D filter: -9.255963e+061 result=40 16:19:34 Get A/D value=-858993460 result=40 16:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:19:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:19:34 Aux= 16:19:34 Message to Camera, serial 148162 queued 16:20:11 Received message from Master: op=PointingHead serial=148175 16:20:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:20:11 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:20:11 Point started: ret=0 16:20:11 point_skyscan result=0 16:20:12 Check angles 16:20:12 SkyScan query 16:20:13 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 16:20:13 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 16:20:13 Check angles 16:20:13 SkyScan query 16:20:13 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 16:20:13 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 16:20:14 Check angles 16:20:14 SkyScan query 16:20:14 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 16:20:14 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 16:20:14 Check angles 16:20:14 SkyScan query 16:20:15 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 16:20:15 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 16:20:15 Check angles 16:20:15 SkyScan query 16:20:16 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:20:16 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:20:16 Check angles 16:20:16 SkyScan query 16:20:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:20:16 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:20:16 Message to Master queued w/err=0: serial=148175 error=0 16:20:21 Received message from Master: op=Filter serial=148176 16:20:21 Color wheel filter change from 0 to 0 16:20:21 FLIGetFilterPos err=0 currentPosition=0 16:20:21 FLIGetStepsRemaining err=0 RemainingSteps=0 16:20:21 Filter is already there-color wheel unchanged 16:20:22 Received message from Master: op=Shutter serial=148177 16:20:22 Shutter LASER close 16:20:22 Received message from Camera: op=State serial=148179 16:20:22 GetSingleValue result=40 Value=cccccccc 16:20:22 SkyScan query 16:20:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:20:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:22 Parameters OK 16:20:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:22 Set A/D data flow result=40 16:20:22 Set A/D channel type result=40 16:20:22 Set A/D encoding result=40 16:20:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:22 Set channel filter=0.000000e+000 result=40 16:20:22 Config A/D Result=40 16:20:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:22 Get A/D filter: -9.255963e+061 result=40 16:20:22 Get A/D value=-858993460 result=40 16:20:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:22 Parameters OK 16:20:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:22 Set A/D data flow result=40 16:20:22 Set A/D channel type result=40 16:20:22 Set A/D encoding result=40 16:20:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:22 Set channel filter=0.000000e+000 result=40 16:20:22 Config A/D Result=40 16:20:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:22 Get A/D filter: -9.255963e+061 result=40 16:20:22 Get A/D value=-858993460 result=40 16:20:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:20:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:20:22 Aux= 16:20:22 Message to Camera, serial 148179 queued 16:20:59 Received message from Master: op=PointingHead serial=148192 16:20:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:20:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:20:59 Point started: ret=0 16:20:59 point_skyscan result=0 16:21:00 Check angles 16:21:00 SkyScan query 16:21:01 SkyScan query done: ret=0 az=152.715<-10181 ze=8.13<-11458 Statuses=0009 0009 16:21:01 Msec=0 True Az=152.715 Ze=8.13 Az status=0009 Ze status=0009 16:21:01 Check angles 16:21:01 SkyScan query 16:21:01 SkyScan query done: ret=0 az=135.225<-9015 ze=-12.645<-12843 Statuses=0009 0009 16:21:01 Msec=750 True Az=135.225 Ze=-12.645 Az status=0009 Ze status=0009 16:21:02 Check angles 16:21:02 SkyScan query 16:21:02 SkyScan query done: ret=0 az=117.72<-7848 ze=-33.675<-14245 Statuses=0009 0009 16:21:02 Msec=1500 True Az=117.72 Ze=-33.675 Az status=0009 Ze status=0009 16:21:02 Check angles 16:21:02 SkyScan query 16:21:03 SkyScan query done: ret=0 az=100.335<-6689 ze=-51.57<-15438 Statuses=0009 0009 16:21:03 Msec=2250 True Az=100.335 Ze=-51.57 Az status=0009 Ze status=0009 16:21:03 Check angles 16:21:03 SkyScan query 16:21:04 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 16:21:04 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 16:21:04 Check angles 16:21:04 SkyScan query 16:21:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:21:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:21:04 Message to Master queued w/err=0: serial=148192 error=0 16:21:09 Received message from Master: op=Filter serial=148193 16:21:09 Color wheel filter change from 0 to 0 16:21:09 FLIGetFilterPos err=0 currentPosition=0 16:21:09 FLIGetStepsRemaining err=0 RemainingSteps=0 16:21:09 Filter is already there-color wheel unchanged 16:21:10 Received message from Master: op=Shutter serial=148194 16:21:10 Shutter LASER close 16:21:10 Received message from Camera: op=State serial=148196 16:21:10 GetSingleValue result=40 Value=cccccccc 16:21:10 SkyScan query 16:21:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:21:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:10 Parameters OK 16:21:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:10 Set A/D data flow result=40 16:21:10 Set A/D channel type result=40 16:21:10 Set A/D encoding result=40 16:21:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:10 Set channel filter=0.000000e+000 result=40 16:21:10 Config A/D Result=40 16:21:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:10 Get A/D filter: -9.255963e+061 result=40 16:21:10 Get A/D value=-858993460 result=40 16:21:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:10 Parameters OK 16:21:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:10 Set A/D data flow result=40 16:21:10 Set A/D channel type result=40 16:21:10 Set A/D encoding result=40 16:21:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:10 Set channel filter=0.000000e+000 result=40 16:21:10 Config A/D Result=40 16:21:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:10 Get A/D filter: -9.255963e+061 result=40 16:21:10 Get A/D value=-858993460 result=40 16:21:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:21:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:21:10 Aux= 16:21:10 Message to Camera, serial 148196 queued 16:21:47 Received message from Master: op=PointingHead serial=148209 16:21:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:21:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:21:47 Point started: ret=0 16:21:47 point_skyscan result=0 16:21:48 Check angles 16:21:48 SkyScan query 16:21:49 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.675<-17445 Statuses=0009 0009 16:21:49 Msec=0 True Az=109.335 Ze=-81.675 Az status=0009 Ze status=0009 16:21:49 Check angles 16:21:49 SkyScan query 16:21:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.035<-18869 Statuses=0008 0009 16:21:50 Msec=750 True Az=112.995 Ze=-103.035 Az status=0008 Ze status=0009 16:21:50 Check angles 16:21:50 SkyScan query 16:21:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.005<-20267 Statuses=0008 0009 16:21:50 Msec=1500 True Az=112.995 Ze=-124.005 Az status=0008 Ze status=0009 16:21:51 Check angles 16:21:51 SkyScan query 16:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.915<-21661 Statuses=0008 0009 16:21:51 Msec=2250 True Az=112.995 Ze=-144.915 Az status=0008 Ze status=0009 16:21:51 Check angles 16:21:51 SkyScan query 16:21:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.35<-23090 Statuses=0008 0009 16:21:52 Msec=3000 True Az=112.995 Ze=-166.35 Az status=0008 Ze status=0009 16:21:52 Check angles 16:21:52 SkyScan query 16:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:21:53 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:21:53 Message to Master queued w/err=0: serial=148209 error=0 16:21:58 Received message from Master: op=Filter serial=148210 16:21:58 Color wheel filter change from 0 to 0 16:21:58 FLIGetFilterPos err=0 currentPosition=0 16:21:58 FLIGetStepsRemaining err=0 RemainingSteps=0 16:21:58 Filter is already there-color wheel unchanged 16:21:58 Received message from Master: op=Shutter serial=148211 16:21:58 Shutter LASER open 16:21:58 Received message from Camera: op=State serial=148213 16:21:58 GetSingleValue result=40 Value=cccccccc 16:21:58 SkyScan query 16:21:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:21:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:59 Parameters OK 16:21:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:59 Set A/D data flow result=40 16:21:59 Set A/D channel type result=40 16:21:59 Set A/D encoding result=40 16:21:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:59 Set channel filter=0.000000e+000 result=40 16:21:59 Config A/D Result=40 16:21:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:59 Get A/D filter: -9.255963e+061 result=40 16:21:59 Get A/D value=-858993460 result=40 16:21:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:59 Parameters OK 16:21:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:59 Set A/D data flow result=40 16:21:59 Set A/D channel type result=40 16:21:59 Set A/D encoding result=40 16:21:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:59 Set channel filter=0.000000e+000 result=40 16:21:59 Config A/D Result=40 16:21:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:59 Get A/D filter: -9.255963e+061 result=40 16:21:59 Get A/D value=-858993460 result=40 16:21:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:21:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:21:59 Aux= 16:21:59 Message to Camera, serial 148213 queued 16:22:07 Received message from Master: op=Shutter serial=148223 16:22:07 Shutter LASER close 16:22:07 Received message from Master: op=PointingHead serial=148227 16:22:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:22:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:22:08 Point started: ret=0 16:22:08 point_skyscan result=0 16:22:08 Check angles 16:22:08 SkyScan query 16:22:09 SkyScan query done: ret=0 az=90.12<-6008 ze=157.44<-1504 Statuses=0009 0009 16:22:09 Msec=0 True Az=90.12 Ze=157.44 Az status=0009 Ze status=0009 16:22:09 Check angles 16:22:09 SkyScan query 16:22:10 SkyScan query done: ret=0 az=72.225<-4815 ze=136.065<-2929 Statuses=0009 0009 16:22:10 Msec=750 True Az=72.225 Ze=136.065 Az status=0009 Ze status=0009 16:22:10 Check angles 16:22:10 SkyScan query 16:22:11 SkyScan query done: ret=0 az=54.42<-3628 ze=114.6<-4360 Statuses=0009 0009 16:22:11 Msec=1500 True Az=54.42 Ze=114.6 Az status=0009 Ze status=0009 16:22:11 Check angles 16:22:11 SkyScan query 16:22:11 SkyScan query done: ret=0 az=41.01<-2734 ze=93.72<-5752 Statuses=0009 0009 16:22:11 Msec=2250 True Az=41.01 Ze=93.72 Az status=0009 Ze status=0009 16:22:12 Check angles 16:22:12 SkyScan query 16:22:12 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 16:22:12 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 16:22:12 Check angles 16:22:12 SkyScan query 16:22:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 16:22:13 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 16:22:13 Check angles 16:22:13 SkyScan query 16:22:14 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 16:22:14 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 16:22:14 Message to Master queued w/err=0: serial=148227 error=0 16:22:19 Received message from Master: op=Filter serial=148228 16:22:19 Color wheel filter change from 0 to 0 16:22:19 FLIGetFilterPos err=0 currentPosition=0 16:22:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:22:19 Filter is already there-color wheel unchanged 16:22:19 Received message from Master: op=Shutter serial=148229 16:22:19 Shutter LASER close 16:22:19 Received message from Camera: op=State serial=148231 16:22:19 GetSingleValue result=40 Value=cccccccc 16:22:19 SkyScan query 16:22:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:22:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:20 Parameters OK 16:22:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:20 Set A/D data flow result=40 16:22:20 Set A/D channel type result=40 16:22:20 Set A/D encoding result=40 16:22:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:20 Set channel filter=0.000000e+000 result=40 16:22:20 Config A/D Result=40 16:22:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:20 Get A/D filter: -9.255963e+061 result=40 16:22:20 Get A/D value=-858993460 result=40 16:22:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:20 Parameters OK 16:22:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:20 Set A/D data flow result=40 16:22:20 Set A/D channel type result=40 16:22:20 Set A/D encoding result=40 16:22:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:20 Set channel filter=0.000000e+000 result=40 16:22:20 Config A/D Result=40 16:22:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:20 Get A/D filter: -9.255963e+061 result=40 16:22:20 Get A/D value=-858993460 result=40 16:22:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:22:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:22:20 Aux= 16:22:20 Message to Camera, serial 148231 queued 16:22:56 Received message from Master: op=PointingHead serial=148244 16:22:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:22:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:22:57 Point started: ret=0 16:22:57 point_skyscan result=0 16:22:57 Check angles 16:22:57 SkyScan query 16:22:58 SkyScan query done: ret=0 az=63.93<-4262 ze=66.555<-7563 Statuses=0009 0008 16:22:58 Msec=0 True Az=63.93 Ze=66.555 Az status=0009 Ze status=0008 16:22:58 Check angles 16:22:58 SkyScan query 16:22:59 SkyScan query done: ret=0 az=81.42<-5428 ze=66.51<-7566 Statuses=0009 0008 16:22:59 Msec=750 True Az=81.42 Ze=66.51 Az status=0009 Ze status=0008 16:22:59 Check angles 16:22:59 SkyScan query 16:23:00 SkyScan query done: ret=0 az=98.85<-6590 ze=66.495<-7567 Statuses=0009 0008 16:23:00 Msec=1500 True Az=98.85 Ze=66.495 Az status=0009 Ze status=0008 16:23:00 Check angles 16:23:00 SkyScan query 16:23:00 SkyScan query done: ret=0 az=116.445<-7763 ze=66.495<-7567 Statuses=0009 0008 16:23:00 Msec=2250 True Az=116.445 Ze=66.495 Az status=0009 Ze status=0008 16:23:00 Check angles 16:23:00 SkyScan query 16:23:01 SkyScan query done: ret=0 az=133.89<-8926 ze=66.495<-7567 Statuses=0009 0008 16:23:01 Msec=3000 True Az=133.89 Ze=66.495 Az status=0009 Ze status=0008 16:23:01 Check angles 16:23:01 SkyScan query 16:23:02 SkyScan query done: ret=0 az=151.245<-10083 ze=66.495<-7567 Statuses=0009 0008 16:23:02 Msec=3750 True Az=151.245 Ze=66.495 Az status=0009 Ze status=0008 16:23:02 Check angles 16:23:02 SkyScan query 16:23:03 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:23:03 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:23:03 Message to Master queued w/err=0: serial=148244 error=0 16:23:08 Received message from Master: op=Filter serial=148245 16:23:08 Color wheel filter change from 0 to 0 16:23:08 FLIGetFilterPos err=0 currentPosition=0 16:23:08 FLIGetStepsRemaining err=0 RemainingSteps=0 16:23:08 Filter is already there-color wheel unchanged 16:23:08 Received message from Master: op=Shutter serial=148246 16:23:08 Shutter LASER close 16:23:08 Received message from Camera: op=State serial=148248 16:23:08 GetSingleValue result=40 Value=cccccccc 16:23:08 SkyScan query 16:23:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:23:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:08 Parameters OK 16:23:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:08 Set A/D data flow result=40 16:23:08 Set A/D channel type result=40 16:23:08 Set A/D encoding result=40 16:23:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:08 Set channel filter=0.000000e+000 result=40 16:23:08 Config A/D Result=40 16:23:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:08 Get A/D filter: -9.255963e+061 result=40 16:23:08 Get A/D value=-858993460 result=40 16:23:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:08 Parameters OK 16:23:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:08 Set A/D data flow result=40 16:23:08 Set A/D channel type result=40 16:23:08 Set A/D encoding result=40 16:23:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:08 Set channel filter=0.000000e+000 result=40 16:23:08 Config A/D Result=40 16:23:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:08 Get A/D filter: -9.255963e+061 result=40 16:23:08 Get A/D value=-858993460 result=40 16:23:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:23:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:23:08 Aux= 16:23:08 Message to Camera, serial 148248 queued 16:23:45 Received message from Master: op=PointingHead serial=148261 16:23:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:23:45 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:23:46 Point started: ret=0 16:23:46 point_skyscan result=0 16:23:46 Check angles 16:23:46 SkyScan query 16:23:47 SkyScan query done: ret=0 az=134.535<-8969 ze=36.18<-9588 Statuses=0009 0009 16:23:47 Msec=0 True Az=134.535 Ze=36.18 Az status=0009 Ze status=0009 16:23:47 Check angles 16:23:47 SkyScan query 16:23:48 SkyScan query done: ret=0 az=117.015<-7801 ze=15.255<-10983 Statuses=0009 0009 16:23:48 Msec=750 True Az=117.015 Ze=15.255 Az status=0009 Ze status=0009 16:23:48 Check angles 16:23:48 SkyScan query 16:23:48 SkyScan query done: ret=0 az=99.615<-6641 ze=-5.775<-12385 Statuses=0009 0009 16:23:48 Msec=1500 True Az=99.615 Ze=-5.775 Az status=0009 Ze status=0009 16:23:49 Check angles 16:23:49 SkyScan query 16:23:49 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.73<-13782 Statuses=0009 0009 16:23:49 Msec=2250 True Az=82.14 Ze=-26.73 Az status=0009 Ze status=0009 16:23:49 Check angles 16:23:49 SkyScan query 16:23:50 SkyScan query done: ret=0 az=64.62<-4308 ze=-38.595<-14573 Statuses=0009 0008 16:23:50 Msec=3000 True Az=64.62 Ze=-38.595 Az status=0009 Ze status=0008 16:23:50 Check angles 16:23:50 SkyScan query 16:23:51 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.52<-14568 Statuses=0009 0008 16:23:51 Msec=3750 True Az=47.19 Ze=-38.52 Az status=0009 Ze status=0008 16:23:51 Check angles 16:23:51 SkyScan query 16:23:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:23:51 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:23:51 Message to Master queued w/err=0: serial=148261 error=0 16:23:56 Received message from Master: op=Filter serial=148262 16:23:56 Color wheel filter change from 0 to 0 16:23:56 FLIGetFilterPos err=0 currentPosition=0 16:23:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:23:56 Filter is already there-color wheel unchanged 16:23:57 Received message from Master: op=Shutter serial=148263 16:23:57 Shutter LASER close 16:23:57 Received message from Camera: op=State serial=148265 16:23:57 GetSingleValue result=40 Value=cccccccc 16:23:57 SkyScan query 16:23:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:23:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:57 Parameters OK 16:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:57 Set A/D data flow result=40 16:23:57 Set A/D channel type result=40 16:23:57 Set A/D encoding result=40 16:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:57 Set channel filter=0.000000e+000 result=40 16:23:57 Config A/D Result=40 16:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:57 Get A/D filter: -9.255963e+061 result=40 16:23:57 Get A/D value=-858993460 result=40 16:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:57 Parameters OK 16:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:57 Set A/D data flow result=40 16:23:57 Set A/D channel type result=40 16:23:57 Set A/D encoding result=40 16:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:57 Set channel filter=0.000000e+000 result=40 16:23:57 Config A/D Result=40 16:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:57 Get A/D filter: -9.255963e+061 result=40 16:23:57 Get A/D value=-858993460 result=40 16:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:23:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:23:57 Aux= 16:23:57 Message to Camera, serial 148265 queued 16:24:34 Received message from Master: op=PointingHead serial=148278 16:24:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:24:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:24:34 Point started: ret=0 16:24:34 point_skyscan result=0 16:24:35 Check angles 16:24:35 SkyScan query 16:24:36 SkyScan query done: ret=0 az=63.735<-4249 ze=-68.04<-16536 Statuses=0009 0009 16:24:36 Msec=0 True Az=63.735 Ze=-68.04 Az status=0009 Ze status=0009 16:24:36 Check angles 16:24:36 SkyScan query 16:24:36 SkyScan query done: ret=0 az=81.255<-5417 ze=-89.01<-17934 Statuses=0009 0009 16:24:36 Msec=750 True Az=81.255 Ze=-89.01 Az status=0009 Ze status=0009 16:24:37 Check angles 16:24:37 SkyScan query 16:24:37 SkyScan query done: ret=0 az=98.82<-6588 ze=-109.92<-19328 Statuses=0009 0009 16:24:37 Msec=1500 True Az=98.82 Ze=-109.92 Az status=0009 Ze status=0009 16:24:37 Check angles 16:24:37 SkyScan query 16:24:38 SkyScan query done: ret=0 az=116.175<-7745 ze=-130.935<-20729 Statuses=0009 0009 16:24:38 Msec=2250 True Az=116.175 Ze=-130.935 Az status=0009 Ze status=0009 16:24:38 Check angles 16:24:38 SkyScan query 16:24:39 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.555<-21437 Statuses=0009 0008 16:24:39 Msec=3000 True Az=130.98 Ze=-141.555 Az status=0009 Ze status=0008 16:24:39 Check angles 16:24:39 SkyScan query 16:24:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 16:24:39 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 16:24:39 Message to Master queued w/err=0: serial=148278 error=0 16:24:44 Received message from Master: op=Filter serial=148279 16:24:44 Color wheel filter change from 0 to 0 16:24:44 FLIGetFilterPos err=0 currentPosition=0 16:24:44 FLIGetStepsRemaining err=0 RemainingSteps=0 16:24:44 Filter is already there-color wheel unchanged 16:24:45 Received message from Master: op=Shutter serial=148280 16:24:45 Shutter LASER close 16:24:45 Received message from Camera: op=State serial=148282 16:24:45 GetSingleValue result=40 Value=cccccccc 16:24:45 SkyScan query 16:24:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:24:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:45 Parameters OK 16:24:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:45 Set A/D data flow result=40 16:24:45 Set A/D channel type result=40 16:24:45 Set A/D encoding result=40 16:24:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:45 Set channel filter=0.000000e+000 result=40 16:24:45 Config A/D Result=40 16:24:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:45 Get A/D filter: -9.255963e+061 result=40 16:24:45 Get A/D value=-858993460 result=40 16:24:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:45 Parameters OK 16:24:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:45 Set A/D data flow result=40 16:24:45 Set A/D channel type result=40 16:24:45 Set A/D encoding result=40 16:24:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:45 Set channel filter=0.000000e+000 result=40 16:24:45 Config A/D Result=40 16:24:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:45 Get A/D filter: -9.255963e+061 result=40 16:24:45 Get A/D value=-858993460 result=40 16:24:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:24:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:24:45 Aux= 16:24:45 Message to Camera, serial 148282 queued 16:25:22 Received message from Master: op=PointingHead serial=148295 16:25:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:25:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:25:22 Point started: ret=0 16:25:22 point_skyscan result=0 16:25:23 Check angles 16:25:23 SkyScan query 16:25:24 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 16:25:24 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 16:25:24 Check angles 16:25:24 SkyScan query 16:25:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:25:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:25:24 Message to Master queued w/err=0: serial=148295 error=0 16:25:29 Received message from Master: op=Filter serial=148296 16:25:29 Color wheel filter change from 0 to 0 16:25:29 FLIGetFilterPos err=0 currentPosition=0 16:25:29 FLIGetStepsRemaining err=0 RemainingSteps=0 16:25:29 Filter is already there-color wheel unchanged 16:25:30 Received message from Master: op=Shutter serial=148297 16:25:30 Shutter LASER open 16:25:30 Received message from Camera: op=State serial=148299 16:25:30 GetSingleValue result=40 Value=cccccccc 16:25:30 SkyScan query 16:25:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.98<-23532 Statuses=0008 0008 16:25:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:30 Parameters OK 16:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:30 Set A/D data flow result=40 16:25:30 Set A/D channel type result=40 16:25:30 Set A/D encoding result=40 16:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:30 Set channel filter=0.000000e+000 result=40 16:25:30 Config A/D Result=40 16:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:30 Get A/D filter: -9.255963e+061 result=40 16:25:30 Get A/D value=-858993460 result=40 16:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:30 Parameters OK 16:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:30 Set A/D data flow result=40 16:25:30 Set A/D channel type result=40 16:25:30 Set A/D encoding result=40 16:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:30 Set channel filter=0.000000e+000 result=40 16:25:30 Config A/D Result=40 16:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:30 Get A/D filter: -9.255963e+061 result=40 16:25:30 Get A/D value=-858993460 result=40 16:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.979996 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:25:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:25:30 Aux= 16:25:30 Message to Camera, serial 148299 queued 16:25:39 Received message from Master: op=Shutter serial=148309 16:25:39 Shutter LASER close 16:25:39 Received message from Master: op=PointingHead serial=148313 16:25:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:25:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:25:40 Point started: ret=0 16:25:40 point_skyscan result=0 16:25:40 Check angles 16:25:40 SkyScan query 16:25:41 SkyScan query done: ret=0 az=135.69<-9046 ze=-143.52<-21568 Statuses=0009 0009 16:25:41 Msec=0 True Az=135.69 Ze=-143.52 Az status=0009 Ze status=0009 16:25:41 Check angles 16:25:41 SkyScan query [UTC 2018-12-14 16:25:42] 16:25:42 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.115<-20141 Statuses=0009 0009 16:25:42 Msec=750 True Az=153.57 Ze=-122.115 Az status=0009 Ze status=0009 16:25:42 Check angles 16:25:42 SkyScan query 16:25:43 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.635<-18709 Statuses=0009 0009 16:25:43 Msec=1500 True Az=171.465 Ze=-100.635 Az status=0009 Ze status=0009 16:25:43 Check angles 16:25:43 SkyScan query 16:25:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.755<-17317 Statuses=0008 0009 16:25:43 Msec=2250 True Az=176.01 Ze=-79.755 Az status=0008 Ze status=0009 16:25:43 Check angles 16:25:43 SkyScan query 16:25:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.335<-15889 Statuses=0008 0009 16:25:44 Msec=3000 True Az=176.01 Ze=-58.335 Az status=0008 Ze status=0009 16:25:44 Check angles 16:25:44 SkyScan query 16:25:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 16:25:45 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 16:25:45 Message to Master queued w/err=0: serial=148313 error=0 16:25:50 Received message from Master: op=Filter serial=148314 16:25:50 Color wheel filter change from 0 to 0 16:25:50 FLIGetFilterPos err=0 currentPosition=0 16:25:50 FLIGetStepsRemaining err=0 RemainingSteps=0 16:25:50 Filter is already there-color wheel unchanged 16:25:50 Received message from Master: op=Shutter serial=148315 16:25:50 Shutter LASER close 16:25:50 Received message from Camera: op=State serial=148317 16:25:50 GetSingleValue result=40 Value=cccccccc 16:25:50 SkyScan query 16:25:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:25:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:51 Parameters OK 16:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:51 Set A/D data flow result=40 16:25:51 Set A/D channel type result=40 16:25:51 Set A/D encoding result=40 16:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:51 Set channel filter=0.000000e+000 result=40 16:25:51 Config A/D Result=40 16:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:51 Get A/D filter: -9.255963e+061 result=40 16:25:51 Get A/D value=-858993460 result=40 16:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:51 Parameters OK 16:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:51 Set A/D data flow result=40 16:25:51 Set A/D channel type result=40 16:25:51 Set A/D encoding result=40 16:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:51 Set channel filter=0.000000e+000 result=40 16:25:51 Config A/D Result=40 16:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:51 Get A/D filter: -9.255963e+061 result=40 16:25:51 Get A/D value=-858993460 result=40 16:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:25:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:25:51 Aux= 16:25:51 Message to Camera, serial 148317 queued 16:26:27 Received message from Master: op=PointingHead serial=148329 16:26:27 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:26:27 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:26:27 Point started: ret=0 16:26:27 point_skyscan result=0 16:26:28 Check angles 16:26:28 SkyScan query 16:26:28 SkyScan query done: ret=0 az=152.865<-10191 ze=-21.525<-13435 Statuses=0009 0009 16:26:28 Msec=0 True Az=152.865 Ze=-21.525 Az status=0009 Ze status=0009 16:26:29 Check angles 16:26:29 SkyScan query 16:26:29 SkyScan query done: ret=0 az=134.94<-8996 ze=-0.105<-12007 Statuses=0009 0009 16:26:29 Msec=750 True Az=134.94 Ze=-0.105 Az status=0009 Ze status=0009 16:26:29 Check angles 16:26:29 SkyScan query 16:26:30 SkyScan query done: ret=0 az=117.42<-7828 ze=20.895<-10607 Statuses=0009 0009 16:26:30 Msec=1500 True Az=117.42 Ze=20.895 Az status=0009 Ze status=0009 16:26:30 Check angles 16:26:30 SkyScan query 16:26:31 SkyScan query done: ret=0 az=100.08<-6672 ze=41.805<-9213 Statuses=0009 0009 16:26:31 Msec=2250 True Az=100.08 Ze=41.805 Az status=0009 Ze status=0009 16:26:31 Check angles 16:26:31 SkyScan query 16:26:31 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 16:26:31 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 16:26:32 Check angles 16:26:32 SkyScan query 16:26:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:26:32 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:26:32 Message to Master queued w/err=0: serial=148329 error=0 16:26:37 Received message from Master: op=Filter serial=148330 16:26:37 Color wheel filter change from 0 to 0 16:26:37 FLIGetFilterPos err=0 currentPosition=0 16:26:37 FLIGetStepsRemaining err=0 RemainingSteps=0 16:26:37 Filter is already there-color wheel unchanged 16:26:37 Received message from Master: op=Shutter serial=148331 16:26:37 Shutter LASER close 16:26:37 Received message from Camera: op=State serial=148333 16:26:37 GetSingleValue result=40 Value=cccccccc 16:26:37 SkyScan query 16:26:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:26:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:26:38 Parameters OK 16:26:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:26:38 Set A/D data flow result=40 16:26:38 Set A/D channel type result=40 16:26:38 Set A/D encoding result=40 16:26:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:26:38 Set channel filter=0.000000e+000 result=40 16:26:38 Config A/D Result=40 16:26:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:26:38 Get A/D filter: -9.255963e+061 result=40 16:26:38 Get A/D value=-858993460 result=40 16:26:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:26:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:26:38 Parameters OK 16:26:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:26:38 Set A/D data flow result=40 16:26:38 Set A/D channel type result=40 16:26:38 Set A/D encoding result=40 16:26:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:26:38 Set channel filter=0.000000e+000 result=40 16:26:38 Config A/D Result=40 16:26:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:26:38 Get A/D filter: -9.255963e+061 result=40 16:26:38 Get A/D value=-858993460 result=40 16:26:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:26:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:26:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:26:38 Aux= 16:26:38 Message to Camera, serial 148333 queued 16:27:14 Received message from Master: op=PointingHead serial=148345 16:27:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:27:14 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:27:14 Point started: ret=0 16:27:14 point_skyscan result=0 16:27:15 Check angles 16:27:15 SkyScan query 16:27:15 SkyScan query done: ret=0 az=108.9<-7260 ze=38.475<-9435 Statuses=0009 0008 16:27:15 Msec=0 True Az=108.9 Ze=38.475 Az status=0009 Ze status=0008 16:27:16 Check angles 16:27:16 SkyScan query 16:27:16 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 16:27:16 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 16:27:16 Check angles 16:27:16 SkyScan query 16:27:17 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 16:27:17 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 16:27:17 Check angles 16:27:17 SkyScan query 16:27:18 SkyScan query done: ret=0 az=161.25<-10750 ze=38.505<-9433 Statuses=0009 0008 16:27:18 Msec=2250 True Az=161.25 Ze=38.505 Az status=0009 Ze status=0008 16:27:18 Check angles 16:27:18 SkyScan query 16:27:18 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:27:18 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:27:19 Check angles 16:27:19 SkyScan query 16:27:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:27:19 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:27:19 Message to Master queued w/err=0: serial=148345 error=0 16:27:24 Received message from Master: op=Filter serial=148346 16:27:24 Color wheel filter change from 0 to 0 16:27:24 FLIGetFilterPos err=0 currentPosition=0 16:27:24 FLIGetStepsRemaining err=0 RemainingSteps=0 16:27:24 Filter is already there-color wheel unchanged 16:27:24 Received message from Master: op=Shutter serial=148347 16:27:24 Shutter LASER close 16:27:24 Received message from Camera: op=State serial=148349 16:27:24 GetSingleValue result=40 Value=cccccccc 16:27:24 SkyScan query 16:27:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:27:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:25 Parameters OK 16:27:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:25 Set A/D data flow result=40 16:27:25 Set A/D channel type result=40 16:27:25 Set A/D encoding result=40 16:27:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:25 Set channel filter=0.000000e+000 result=40 16:27:25 Config A/D Result=40 16:27:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:25 Get A/D filter: -9.255963e+061 result=40 16:27:25 Get A/D value=-858993460 result=40 16:27:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:25 Parameters OK 16:27:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:25 Set A/D data flow result=40 16:27:25 Set A/D channel type result=40 16:27:25 Set A/D encoding result=40 16:27:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:25 Set channel filter=0.000000e+000 result=40 16:27:25 Config A/D Result=40 16:27:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:25 Get A/D filter: -9.255963e+061 result=40 16:27:25 Get A/D value=-858993460 result=40 16:27:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:27:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:27:25 Aux= 16:27:25 Message to Camera, serial 148349 queued 16:28:02 Received message from Master: op=PointingHead serial=148362 16:28:02 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:28:02 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:28:02 Point started: ret=0 16:28:02 point_skyscan result=0 16:28:03 Check angles 16:28:03 SkyScan query 16:28:04 SkyScan query done: ret=0 az=152.895<-10193 ze=8.61<-11426 Statuses=0009 0009 16:28:04 Msec=0 True Az=152.895 Ze=8.61 Az status=0009 Ze status=0009 16:28:04 Check angles 16:28:04 SkyScan query 16:28:04 SkyScan query done: ret=0 az=135.015<-9001 ze=-12.78<-12852 Statuses=0009 0009 16:28:04 Msec=750 True Az=135.015 Ze=-12.78 Az status=0009 Ze status=0009 16:28:04 Check angles 16:28:04 SkyScan query 16:28:05 SkyScan query done: ret=0 az=117.09<-7806 ze=-34.26<-14284 Statuses=0009 0009 16:28:05 Msec=1500 True Az=117.09 Ze=-34.26 Az status=0009 Ze status=0009 16:28:05 Check angles 16:28:05 SkyScan query 16:28:06 SkyScan query done: ret=0 az=99.69<-6646 ze=-51.585<-15439 Statuses=0009 0009 16:28:06 Msec=2250 True Az=99.69 Ze=-51.585 Az status=0009 Ze status=0009 16:28:06 Check angles 16:28:06 SkyScan query 16:28:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 16:28:07 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 16:28:07 Check angles 16:28:07 SkyScan query 16:28:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:28:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:28:07 Message to Master queued w/err=0: serial=148362 error=0 16:28:12 Received message from Master: op=Filter serial=148363 16:28:12 Color wheel filter change from 0 to 0 16:28:12 FLIGetFilterPos err=0 currentPosition=0 16:28:12 FLIGetStepsRemaining err=0 RemainingSteps=0 16:28:12 Filter is already there-color wheel unchanged 16:28:12 Received message from Master: op=Shutter serial=148364 16:28:12 Shutter LASER close 16:28:13 Received message from Camera: op=State serial=148366 16:28:13 GetSingleValue result=40 Value=cccccccc 16:28:13 SkyScan query 16:28:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:28:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:13 Parameters OK 16:28:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:13 Set A/D data flow result=40 16:28:13 Set A/D channel type result=40 16:28:13 Set A/D encoding result=40 16:28:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:13 Set channel filter=0.000000e+000 result=40 16:28:13 Config A/D Result=40 16:28:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:13 Get A/D filter: -9.255963e+061 result=40 16:28:13 Get A/D value=-858993460 result=40 16:28:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:13 Parameters OK 16:28:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:13 Set A/D data flow result=40 16:28:13 Set A/D channel type result=40 16:28:13 Set A/D encoding result=40 16:28:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:13 Set channel filter=0.000000e+000 result=40 16:28:13 Config A/D Result=40 16:28:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:13 Get A/D filter: -9.255963e+061 result=40 16:28:13 Get A/D value=-858993460 result=40 16:28:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:28:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:28:13 Aux= 16:28:13 Message to Camera, serial 148366 queued 16:28:50 Received message from Master: op=PointingHead serial=148379 16:28:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:28:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:28:50 Point started: ret=0 16:28:50 point_skyscan result=0 16:28:51 Check angles 16:28:51 SkyScan query 16:28:52 SkyScan query done: ret=0 az=108.705<-7247 ze=-81.015<-17401 Statuses=0009 0009 16:28:52 Msec=0 True Az=108.705 Ze=-81.015 Az status=0009 Ze status=0009 16:28:52 Check angles 16:28:52 SkyScan query 16:28:52 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.405<-18827 Statuses=0008 0009 16:28:52 Msec=750 True Az=112.98 Ze=-102.405 Az status=0008 Ze status=0009 16:28:53 Check angles 16:28:53 SkyScan query 16:28:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.795<-20253 Statuses=0008 0009 16:28:53 Msec=1500 True Az=112.995 Ze=-123.795 Az status=0008 Ze status=0009 16:28:53 Check angles 16:28:53 SkyScan query 16:28:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.705<-21647 Statuses=0008 0009 16:28:54 Msec=2250 True Az=112.995 Ze=-144.705 Az status=0008 Ze status=0009 16:28:54 Check angles 16:28:54 SkyScan query 16:28:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.66<-23044 Statuses=0008 0009 16:28:55 Msec=3000 True Az=112.995 Ze=-165.66 Az status=0008 Ze status=0009 16:28:55 Check angles 16:28:55 SkyScan query 16:28:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:28:55 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:28:55 Message to Master queued w/err=0: serial=148379 error=0 16:29:00 Received message from Master: op=Filter serial=148380 16:29:00 Color wheel filter change from 0 to 0 16:29:00 FLIGetFilterPos err=0 currentPosition=0 16:29:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:29:00 Filter is already there-color wheel unchanged 16:29:01 Received message from Master: op=Shutter serial=148381 16:29:01 Shutter LASER open 16:29:01 Received message from Camera: op=State serial=148383 16:29:01 GetSingleValue result=40 Value=cccccccc 16:29:01 SkyScan query 16:29:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:29:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:01 Parameters OK 16:29:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:01 Set A/D data flow result=40 16:29:01 Set A/D channel type result=40 16:29:01 Set A/D encoding result=40 16:29:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:01 Set channel filter=0.000000e+000 result=40 16:29:01 Config A/D Result=40 16:29:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:01 Get A/D filter: -9.255963e+061 result=40 16:29:01 Get A/D value=-858993460 result=40 16:29:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:01 Parameters OK 16:29:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:01 Set A/D data flow result=40 16:29:01 Set A/D channel type result=40 16:29:01 Set A/D encoding result=40 16:29:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:01 Set channel filter=0.000000e+000 result=40 16:29:01 Config A/D Result=40 16:29:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:01 Get A/D filter: -9.255963e+061 result=40 16:29:01 Get A/D value=-858993460 result=40 16:29:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:29:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:29:01 Aux= 16:29:01 Message to Camera, serial 148383 queued 16:29:10 Received message from Master: op=Shutter serial=148393 16:29:10 Shutter LASER close 16:29:10 Received message from Master: op=PointingHead serial=148397 16:29:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:29:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:29:11 Point started: ret=0 16:29:11 point_skyscan result=0 16:29:11 Check angles 16:29:11 SkyScan query 16:29:12 SkyScan query done: ret=0 az=89.55<-5970 ze=156.81<-1546 Statuses=0009 0009 16:29:12 Msec=0 True Az=89.55 Ze=156.81 Az status=0009 Ze status=0009 16:29:12 Check angles 16:29:12 SkyScan query 16:29:13 SkyScan query done: ret=0 az=72<-4800 ze=135.87<-2942 Statuses=0009 0009 16:29:13 Msec=750 True Az=72 Ze=135.87 Az status=0009 Ze status=0009 16:29:13 Check angles 16:29:13 SkyScan query 16:29:13 SkyScan query done: ret=0 az=54.63<-3642 ze=114.87<-4342 Statuses=0009 0009 16:29:13 Msec=1500 True Az=54.63 Ze=114.87 Az status=0009 Ze status=0009 16:29:14 Check angles 16:29:14 SkyScan query 16:29:14 SkyScan query done: ret=0 az=41.025<-2735 ze=93.93<-5738 Statuses=0009 0009 16:29:14 Msec=2250 True Az=41.025 Ze=93.93 Az status=0009 Ze status=0009 16:29:14 Check angles 16:29:14 SkyScan query 16:29:15 SkyScan query done: ret=0 az=40.995<-2733 ze=72.945<-7137 Statuses=0008 0009 16:29:15 Msec=3000 True Az=40.995 Ze=72.945 Az status=0008 Ze status=0009 16:29:15 Check angles 16:29:15 SkyScan query 16:29:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 16:29:16 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 16:29:16 Check angles 16:29:16 SkyScan query 16:29:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:29:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:29:16 Message to Master queued w/err=0: serial=148397 error=0 16:29:21 Received message from Master: op=Filter serial=148398 16:29:21 Color wheel filter change from 0 to 0 16:29:21 FLIGetFilterPos err=0 currentPosition=0 16:29:21 FLIGetStepsRemaining err=0 RemainingSteps=0 16:29:21 Filter is already there-color wheel unchanged 16:29:22 Received message from Master: op=Shutter serial=148399 16:29:22 Shutter LASER close 16:29:22 Received message from Camera: op=State serial=148401 16:29:22 GetSingleValue result=40 Value=cccccccc 16:29:22 SkyScan query 16:29:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:29:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:22 Parameters OK 16:29:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:22 Set A/D data flow result=40 16:29:22 Set A/D channel type result=40 16:29:22 Set A/D encoding result=40 16:29:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:22 Set channel filter=0.000000e+000 result=40 16:29:22 Config A/D Result=40 16:29:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:22 Get A/D filter: -9.255963e+061 result=40 16:29:22 Get A/D value=-858993460 result=40 16:29:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:22 Parameters OK 16:29:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:22 Set A/D data flow result=40 16:29:22 Set A/D channel type result=40 16:29:22 Set A/D encoding result=40 16:29:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:22 Set channel filter=0.000000e+000 result=40 16:29:22 Config A/D Result=40 16:29:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:22 Get A/D filter: -9.255963e+061 result=40 16:29:22 Get A/D value=-858993460 result=40 16:29:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:29:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:29:22 Aux= 16:29:22 Message to Camera, serial 148401 queued 16:29:59 Received message from Master: op=PointingHead serial=148414 16:29:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:29:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:29:59 Point started: ret=0 16:29:59 point_skyscan result=0 16:30:00 Check angles 16:30:00 SkyScan query 16:30:01 SkyScan query done: ret=0 az=63.78<-4252 ze=66.54<-7564 Statuses=0009 0008 16:30:01 Msec=0 True Az=63.78 Ze=66.54 Az status=0009 Ze status=0008 16:30:01 Check angles 16:30:01 SkyScan query 16:30:02 SkyScan query done: ret=0 az=81.66<-5444 ze=66.51<-7566 Statuses=0009 0008 16:30:02 Msec=750 True Az=81.66 Ze=66.51 Az status=0009 Ze status=0008 16:30:02 Check angles 16:30:02 SkyScan query 16:30:02 SkyScan query done: ret=0 az=99.09<-6606 ze=66.495<-7567 Statuses=0009 0008 16:30:02 Msec=1500 True Az=99.09 Ze=66.495 Az status=0009 Ze status=0008 16:30:02 Check angles 16:30:02 SkyScan query 16:30:03 SkyScan query done: ret=0 az=116.64<-7776 ze=66.495<-7567 Statuses=0009 0008 16:30:03 Msec=2250 True Az=116.64 Ze=66.495 Az status=0009 Ze status=0008 16:30:03 Check angles 16:30:03 SkyScan query 16:30:04 SkyScan query done: ret=0 az=134.115<-8941 ze=66.495<-7567 Statuses=0009 0008 16:30:04 Msec=3000 True Az=134.115 Ze=66.495 Az status=0009 Ze status=0008 16:30:04 Check angles 16:30:04 SkyScan query 16:30:05 SkyScan query done: ret=0 az=151.47<-10098 ze=66.495<-7567 Statuses=0009 0008 16:30:05 Msec=3750 True Az=151.47 Ze=66.495 Az status=0009 Ze status=0008 16:30:05 Check angles 16:30:05 SkyScan query 16:30:05 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:30:05 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:30:05 Message to Master queued w/err=0: serial=148414 error=0 16:30:10 Received message from Master: op=Filter serial=148415 16:30:10 Color wheel filter change from 0 to 0 16:30:10 FLIGetFilterPos err=0 currentPosition=0 16:30:10 FLIGetStepsRemaining err=0 RemainingSteps=0 16:30:10 Filter is already there-color wheel unchanged 16:30:10 Received message from Master: op=Shutter serial=148416 16:30:10 Shutter LASER close 16:30:11 Received message from Camera: op=State serial=148418 16:30:11 GetSingleValue result=40 Value=cccccccc 16:30:11 SkyScan query 16:30:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:30:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:11 Parameters OK 16:30:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:11 Set A/D data flow result=40 16:30:11 Set A/D channel type result=40 16:30:11 Set A/D encoding result=40 16:30:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:11 Set channel filter=0.000000e+000 result=40 16:30:11 Config A/D Result=40 16:30:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:11 Get A/D filter: -9.255963e+061 result=40 16:30:11 Get A/D value=-858993460 result=40 16:30:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:11 Parameters OK 16:30:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:11 Set A/D data flow result=40 16:30:11 Set A/D channel type result=40 16:30:11 Set A/D encoding result=40 16:30:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:11 Set channel filter=0.000000e+000 result=40 16:30:11 Config A/D Result=40 16:30:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:11 Get A/D filter: -9.255963e+061 result=40 16:30:11 Get A/D value=-858993460 result=40 16:30:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:30:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:30:11 Aux= 16:30:11 Message to Camera, serial 148418 queued 16:30:48 Received message from Master: op=PointingHead serial=148431 16:30:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:30:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:30:48 Point started: ret=0 16:30:48 point_skyscan result=0 16:30:49 Check angles 16:30:49 SkyScan query 16:30:50 SkyScan query done: ret=0 az=134.79<-8986 ze=36.57<-9562 Statuses=0009 0009 16:30:50 Msec=0 True Az=134.79 Ze=36.57 Az status=0009 Ze status=0009 16:30:50 Check angles 16:30:50 SkyScan query 16:30:50 SkyScan query done: ret=0 az=117.42<-7828 ze=15.645<-10957 Statuses=0009 0009 16:30:50 Msec=750 True Az=117.42 Ze=15.645 Az status=0009 Ze status=0009 16:30:51 Check angles 16:30:51 SkyScan query 16:30:51 SkyScan query done: ret=0 az=100.035<-6669 ze=-5.355<-12357 Statuses=0009 0009 16:30:51 Msec=1500 True Az=100.035 Ze=-5.355 Az status=0009 Ze status=0009 16:30:51 Check angles 16:30:51 SkyScan query 16:30:52 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.805<-13787 Statuses=0009 0009 16:30:52 Msec=2250 True Az=82.155 Ze=-26.805 Az status=0009 Ze status=0009 16:30:52 Check angles 16:30:52 SkyScan query 16:30:53 SkyScan query done: ret=0 az=64.635<-4309 ze=-38.595<-14573 Statuses=0009 0008 16:30:53 Msec=3000 True Az=64.635 Ze=-38.595 Az status=0009 Ze status=0008 16:30:53 Check angles 16:30:53 SkyScan query 16:30:53 SkyScan query done: ret=0 az=47.175<-3145 ze=-38.52<-14568 Statuses=0009 0008 16:30:53 Msec=3750 True Az=47.175 Ze=-38.52 Az status=0009 Ze status=0008 16:30:54 Check angles 16:30:54 SkyScan query 16:30:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:30:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:30:54 Message to Master queued w/err=0: serial=148431 error=0 16:30:59 Received message from Master: op=Filter serial=148432 16:30:59 Color wheel filter change from 0 to 0 16:30:59 FLIGetFilterPos err=0 currentPosition=0 16:30:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:30:59 Filter is already there-color wheel unchanged 16:30:59 Received message from Master: op=Shutter serial=148433 16:30:59 Shutter LASER close 16:30:59 Received message from Camera: op=State serial=148435 16:30:59 GetSingleValue result=40 Value=cccccccc 16:30:59 SkyScan query 16:31:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:31:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:00 Parameters OK 16:31:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:00 Set A/D data flow result=40 16:31:00 Set A/D channel type result=40 16:31:00 Set A/D encoding result=40 16:31:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:00 Set channel filter=0.000000e+000 result=40 16:31:00 Config A/D Result=40 16:31:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:00 Get A/D filter: -9.255963e+061 result=40 16:31:00 Get A/D value=-858993460 result=40 16:31:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:00 Parameters OK 16:31:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:00 Set A/D data flow result=40 16:31:00 Set A/D channel type result=40 16:31:00 Set A/D encoding result=40 16:31:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:00 Set channel filter=0.000000e+000 result=40 16:31:00 Config A/D Result=40 16:31:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:00 Get A/D filter: -9.255963e+061 result=40 16:31:00 Get A/D value=-858993460 result=40 16:31:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:31:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:31:00 Aux= 16:31:00 Message to Camera, serial 148435 queued 16:31:36 Received message from Master: op=PointingHead serial=148447 16:31:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:31:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:31:36 Point started: ret=0 16:31:36 point_skyscan result=0 16:31:37 Check angles 16:31:37 SkyScan query 16:31:38 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.55<-16570 Statuses=0009 0009 16:31:38 Msec=0 True Az=64.2 Ze=-68.55 Az status=0009 Ze status=0009 16:31:38 Check angles 16:31:38 SkyScan query 16:31:38 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.535<-17969 Statuses=0009 0009 16:31:38 Msec=750 True Az=81.645 Ze=-89.535 Az status=0009 Ze status=0009 16:31:38 Check angles 16:31:38 SkyScan query 16:31:39 SkyScan query done: ret=0 az=99.21<-6614 ze=-110.46<-19364 Statuses=0009 0009 16:31:39 Msec=1500 True Az=99.21 Ze=-110.46 Az status=0009 Ze status=0009 16:31:39 Check angles 16:31:39 SkyScan query 16:31:40 SkyScan query done: ret=0 az=116.535<-7769 ze=-131.355<-20757 Statuses=0009 0009 16:31:40 Msec=2250 True Az=116.535 Ze=-131.355 Az status=0009 Ze status=0009 16:31:40 Check angles 16:31:40 SkyScan query 16:31:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 16:31:41 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 16:31:41 Check angles 16:31:41 SkyScan query 16:31:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 16:31:41 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 16:31:41 Message to Master queued w/err=0: serial=148447 error=0 16:31:46 Received message from Master: op=Filter serial=148448 16:31:46 Color wheel filter change from 0 to 0 16:31:46 FLIGetFilterPos err=0 currentPosition=0 16:31:46 FLIGetStepsRemaining err=0 RemainingSteps=0 16:31:46 Filter is already there-color wheel unchanged 16:31:46 Received message from Master: op=Shutter serial=148449 16:31:46 Shutter LASER close 16:31:46 Received message from Camera: op=State serial=148451 16:31:46 GetSingleValue result=40 Value=cccccccc 16:31:46 SkyScan query 16:31:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:31:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:47 Parameters OK 16:31:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:47 Set A/D data flow result=40 16:31:47 Set A/D channel type result=40 16:31:47 Set A/D encoding result=40 16:31:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:47 Set channel filter=0.000000e+000 result=40 16:31:47 Config A/D Result=40 16:31:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:47 Get A/D filter: -9.255963e+061 result=40 16:31:47 Get A/D value=-858993460 result=40 16:31:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:47 Parameters OK 16:31:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:47 Set A/D data flow result=40 16:31:47 Set A/D channel type result=40 16:31:47 Set A/D encoding result=40 16:31:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:47 Set channel filter=0.000000e+000 result=40 16:31:47 Config A/D Result=40 16:31:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:47 Get A/D filter: -9.255963e+061 result=40 16:31:47 Get A/D value=-858993460 result=40 16:31:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:31:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:31:47 Aux= 16:31:47 Message to Camera, serial 148451 queued 16:32:24 Received message from Master: op=PointingHead serial=148464 16:32:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:32:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:32:24 Point started: ret=0 16:32:24 point_skyscan result=0 16:32:25 Check angles 16:32:25 SkyScan query 16:32:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 16:32:26 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 16:32:26 Check angles 16:32:26 SkyScan query 16:32:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:32:26 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:32:26 Message to Master queued w/err=0: serial=148464 error=0 16:32:31 Received message from Master: op=Filter serial=148465 16:32:31 Color wheel filter change from 0 to 0 16:32:31 FLIGetFilterPos err=0 currentPosition=0 16:32:31 FLIGetStepsRemaining err=0 RemainingSteps=0 16:32:31 Filter is already there-color wheel unchanged 16:32:31 Received message from Master: op=Shutter serial=148466 16:32:31 Shutter LASER open 16:32:32 Received message from Camera: op=State serial=148468 16:32:32 GetSingleValue result=40 Value=cccccccc 16:32:32 SkyScan query 16:32:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:32:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:32 Parameters OK 16:32:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:32 Set A/D data flow result=40 16:32:32 Set A/D channel type result=40 16:32:32 Set A/D encoding result=40 16:32:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:32 Set channel filter=0.000000e+000 result=40 16:32:32 Config A/D Result=40 16:32:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:32 Get A/D filter: -9.255963e+061 result=40 16:32:32 Get A/D value=-858993460 result=40 16:32:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:32 Parameters OK 16:32:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:32 Set A/D data flow result=40 16:32:32 Set A/D channel type result=40 16:32:32 Set A/D encoding result=40 16:32:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:32 Set channel filter=0.000000e+000 result=40 16:32:32 Config A/D Result=40 16:32:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:32 Get A/D filter: -9.255963e+061 result=40 16:32:32 Get A/D value=-858993460 result=40 16:32:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:32:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:32:32 Aux= 16:32:32 Message to Camera, serial 148468 queued 16:32:41 Received message from Master: op=Shutter serial=148478 16:32:41 Shutter LASER close 16:32:41 Received message from Master: op=PointingHead serial=148482 16:32:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:32:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:32:42 Point started: ret=0 16:32:42 point_skyscan result=0 16:32:42 Check angles 16:32:42 SkyScan query 16:32:43 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.49<-21566 Statuses=0009 0009 16:32:43 Msec=0 True Az=136.005 Ze=-143.49 Az status=0009 Ze status=0009 16:32:43 Check angles 16:32:43 SkyScan query 16:32:44 SkyScan query done: ret=0 az=153.72<-10248 ze=-122.1<-20140 Statuses=0009 0009 16:32:44 Msec=750 True Az=153.72 Ze=-122.1 Az status=0009 Ze status=0009 16:32:44 Check angles 16:32:44 SkyScan query 16:32:44 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.115<-18741 Statuses=0009 0009 16:32:44 Msec=1500 True Az=171.225 Ze=-101.115 Az status=0009 Ze status=0009 16:32:45 Check angles 16:32:45 SkyScan query 16:32:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 16:32:45 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 16:32:45 Check angles 16:32:45 SkyScan query 16:32:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.74<-15916 Statuses=0008 0009 16:32:46 Msec=3000 True Az=176.01 Ze=-58.74 Az status=0008 Ze status=0009 16:32:46 Check angles 16:32:46 SkyScan query 16:32:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:32:47 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:32:47 Message to Master queued w/err=0: serial=148482 error=0 16:32:52 Received message from Master: op=Filter serial=148483 16:32:52 Color wheel filter change from 0 to 0 16:32:52 FLIGetFilterPos err=0 currentPosition=0 16:32:52 FLIGetStepsRemaining err=0 RemainingSteps=0 16:32:52 Filter is already there-color wheel unchanged 16:32:52 Received message from Master: op=Shutter serial=148484 16:32:52 Shutter LASER close 16:32:52 Received message from Camera: op=State serial=148486 16:32:52 GetSingleValue result=40 Value=cccccccc 16:32:52 SkyScan query 16:32:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:32:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:53 Parameters OK 16:32:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:53 Set A/D data flow result=40 16:32:53 Set A/D channel type result=40 16:32:53 Set A/D encoding result=40 16:32:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:53 Set channel filter=0.000000e+000 result=40 16:32:53 Config A/D Result=40 16:32:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:53 Get A/D filter: -9.255963e+061 result=40 16:32:53 Get A/D value=-858993460 result=40 16:32:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:53 Parameters OK 16:32:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:53 Set A/D data flow result=40 16:32:53 Set A/D channel type result=40 16:32:53 Set A/D encoding result=40 16:32:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:53 Set channel filter=0.000000e+000 result=40 16:32:53 Config A/D Result=40 16:32:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:53 Get A/D filter: -9.255963e+061 result=40 16:32:53 Get A/D value=-858993460 result=40 16:32:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:32:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:32:53 Aux= 16:32:53 Message to Camera, serial 148486 queued 16:33:29 Received message from Master: op=PointingHead serial=148499 16:33:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:33:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:33:30 Point started: ret=0 16:33:30 point_skyscan result=0 16:33:31 Check angles 16:33:31 SkyScan query 16:33:31 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.72<-13448 Statuses=0009 0009 16:33:31 Msec=0 True Az=152.985 Ze=-21.72 Az status=0009 Ze status=0009 16:33:31 Check angles 16:33:31 SkyScan query 16:33:32 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.33<-12022 Statuses=0009 0009 16:33:32 Msec=750 True Az=135.135 Ze=-0.33 Az status=0009 Ze status=0009 16:33:32 Check angles 16:33:32 SkyScan query 16:33:33 SkyScan query done: ret=0 az=117.6<-7840 ze=20.76<-10616 Statuses=0009 0009 16:33:33 Msec=1500 True Az=117.6 Ze=20.76 Az status=0009 Ze status=0009 16:33:33 Check angles 16:33:33 SkyScan query 16:33:33 SkyScan query done: ret=0 az=99.9<-6660 ze=42.03<-9198 Statuses=0009 0009 16:33:33 Msec=2250 True Az=99.9 Ze=42.03 Az status=0009 Ze status=0009 16:33:34 Check angles 16:33:34 SkyScan query 16:33:34 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:33:34 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:33:34 Check angles 16:33:34 SkyScan query 16:33:35 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 16:33:35 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 16:33:35 Message to Master queued w/err=0: serial=148499 error=0 16:33:40 Received message from Master: op=Filter serial=148500 16:33:40 Color wheel filter change from 0 to 0 16:33:40 FLIGetFilterPos err=0 currentPosition=0 16:33:40 FLIGetStepsRemaining err=0 RemainingSteps=0 16:33:40 Filter is already there-color wheel unchanged 16:33:40 Received message from Master: op=Shutter serial=148501 16:33:40 Shutter LASER close 16:33:40 Received message from Camera: op=State serial=148503 16:33:40 GetSingleValue result=40 Value=cccccccc 16:33:40 SkyScan query 16:33:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:33:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:33:41 Parameters OK 16:33:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:33:41 Set A/D data flow result=40 16:33:41 Set A/D channel type result=40 16:33:41 Set A/D encoding result=40 16:33:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:33:41 Set channel filter=0.000000e+000 result=40 16:33:41 Config A/D Result=40 16:33:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:33:41 Get A/D filter: -9.255963e+061 result=40 16:33:41 Get A/D value=-858993460 result=40 16:33:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:33:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:33:41 Parameters OK 16:33:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:33:41 Set A/D data flow result=40 16:33:41 Set A/D channel type result=40 16:33:41 Set A/D encoding result=40 16:33:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:33:41 Set channel filter=0.000000e+000 result=40 16:33:41 Config A/D Result=40 16:33:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:33:41 Get A/D filter: -9.255963e+061 result=40 16:33:41 Get A/D value=-858993460 result=40 16:33:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:33:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:33:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:33:41 Aux= 16:33:41 Message to Camera, serial 148503 queued 16:34:18 Received message from Master: op=PointingHead serial=148516 16:34:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:34:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:34:18 Point started: ret=0 16:34:18 point_skyscan result=0 16:34:19 Check angles 16:34:19 SkyScan query 16:34:19 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 16:34:19 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 16:34:19 Check angles 16:34:19 SkyScan query 16:34:20 SkyScan query done: ret=0 az=126.93<-8462 ze=38.505<-9433 Statuses=0009 0008 16:34:20 Msec=750 True Az=126.93 Ze=38.505 Az status=0009 Ze status=0008 16:34:20 Check angles 16:34:20 SkyScan query 16:34:21 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 16:34:21 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 16:34:21 Check angles 16:34:21 SkyScan query 16:34:21 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 16:34:21 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 16:34:22 Check angles 16:34:22 SkyScan query 16:34:22 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 16:34:22 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 16:34:22 Check angles 16:34:22 SkyScan query 16:34:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:34:23 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:34:23 Message to Master queued w/err=0: serial=148516 error=0 16:34:28 Received message from Master: op=Filter serial=148517 16:34:28 Color wheel filter change from 0 to 0 16:34:28 FLIGetFilterPos err=0 currentPosition=0 16:34:28 FLIGetStepsRemaining err=0 RemainingSteps=0 16:34:28 Filter is already there-color wheel unchanged 16:34:28 Received message from Master: op=Shutter serial=148518 16:34:28 Shutter LASER close 16:34:28 Received message from Camera: op=State serial=148520 16:34:28 GetSingleValue result=40 Value=cccccccc 16:34:28 SkyScan query 16:34:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:34:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:29 Parameters OK 16:34:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:29 Set A/D data flow result=40 16:34:29 Set A/D channel type result=40 16:34:29 Set A/D encoding result=40 16:34:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:29 Set channel filter=0.000000e+000 result=40 16:34:29 Config A/D Result=40 16:34:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:29 Get A/D filter: -9.255963e+061 result=40 16:34:29 Get A/D value=-858993460 result=40 16:34:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:29 Parameters OK 16:34:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:29 Set A/D data flow result=40 16:34:29 Set A/D channel type result=40 16:34:29 Set A/D encoding result=40 16:34:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:29 Set channel filter=0.000000e+000 result=40 16:34:29 Config A/D Result=40 16:34:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:29 Get A/D filter: -9.255963e+061 result=40 16:34:29 Get A/D value=-858993460 result=40 16:34:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:34:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:34:29 Aux= 16:34:29 Message to Camera, serial 148520 queued 16:35:06 Received message from Master: op=PointingHead serial=148533 16:35:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:35:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:35:06 Point started: ret=0 16:35:06 point_skyscan result=0 16:35:07 Check angles 16:35:07 SkyScan query 16:35:07 SkyScan query done: ret=0 az=152.745<-10183 ze=8.4<-11440 Statuses=0009 0009 16:35:07 Msec=0 True Az=152.745 Ze=8.4 Az status=0009 Ze status=0009 16:35:08 Check angles 16:35:08 SkyScan query 16:35:08 SkyScan query done: ret=0 az=134.865<-8991 ze=-12.96<-12864 Statuses=0009 0009 16:35:08 Msec=750 True Az=134.865 Ze=-12.96 Az status=0009 Ze status=0009 16:35:08 Check angles 16:35:08 SkyScan query 16:35:09 SkyScan query done: ret=0 az=117.45<-7830 ze=-33.99<-14266 Statuses=0009 0009 16:35:09 Msec=1500 True Az=117.45 Ze=-33.99 Az status=0009 Ze status=0009 16:35:09 Check angles 16:35:09 SkyScan query 16:35:10 SkyScan query done: ret=0 az=100.065<-6671 ze=-51.585<-15439 Statuses=0009 0009 16:35:10 Msec=2250 True Az=100.065 Ze=-51.585 Az status=0009 Ze status=0009 16:35:10 Check angles 16:35:10 SkyScan query 16:35:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 16:35:10 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 16:35:11 Check angles 16:35:11 SkyScan query 16:35:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:35:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:35:11 Message to Master queued w/err=0: serial=148533 error=0 16:35:16 Received message from Master: op=Filter serial=148534 16:35:16 Color wheel filter change from 0 to 0 16:35:16 FLIGetFilterPos err=0 currentPosition=0 16:35:16 FLIGetStepsRemaining err=0 RemainingSteps=0 16:35:16 Filter is already there-color wheel unchanged 16:35:16 Received message from Master: op=Shutter serial=148535 16:35:16 Shutter LASER close 16:35:16 Received message from Camera: op=State serial=148537 16:35:16 GetSingleValue result=40 Value=cccccccc 16:35:16 SkyScan query 16:35:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:35:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:17 Parameters OK 16:35:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:17 Set A/D data flow result=40 16:35:17 Set A/D channel type result=40 16:35:17 Set A/D encoding result=40 16:35:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:17 Set channel filter=0.000000e+000 result=40 16:35:17 Config A/D Result=40 16:35:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:17 Get A/D filter: -9.255963e+061 result=40 16:35:17 Get A/D value=-858993460 result=40 16:35:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:17 Parameters OK 16:35:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:17 Set A/D data flow result=40 16:35:17 Set A/D channel type result=40 16:35:17 Set A/D encoding result=40 16:35:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:17 Set channel filter=0.000000e+000 result=40 16:35:17 Config A/D Result=40 16:35:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:17 Get A/D filter: -9.255963e+061 result=40 16:35:17 Get A/D value=-858993460 result=40 16:35:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:35:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:35:17 Aux= 16:35:17 Message to Camera, serial 148537 queued [UTC 2018-12-14 16:35:52] 16:35:54 Received message from Master: op=PointingHead serial=148550 16:35:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:35:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:35:54 Point started: ret=0 16:35:54 point_skyscan result=0 16:35:55 Check angles 16:35:55 SkyScan query 16:35:55 SkyScan query done: ret=0 az=108.78<-7252 ze=-81.015<-17401 Statuses=0009 0009 16:35:55 Msec=0 True Az=108.78 Ze=-81.015 Az status=0009 Ze status=0009 16:35:56 Check angles 16:35:56 SkyScan query 16:35:56 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.42<-18828 Statuses=0008 0009 16:35:56 Msec=750 True Az=112.98 Ze=-102.42 Az status=0008 Ze status=0009 16:35:56 Check angles 16:35:56 SkyScan query 16:35:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.81<-20254 Statuses=0008 0009 16:35:57 Msec=1500 True Az=112.995 Ze=-123.81 Az status=0008 Ze status=0009 16:35:57 Check angles 16:35:57 SkyScan query 16:35:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 16:35:58 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 16:35:58 Check angles 16:35:58 SkyScan query 16:35:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.675<-23045 Statuses=0008 0009 16:35:58 Msec=3000 True Az=112.995 Ze=-165.675 Az status=0008 Ze status=0009 16:35:59 Check angles 16:35:59 SkyScan query 16:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:35:59 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:35:59 Message to Master queued w/err=0: serial=148550 error=0 16:36:04 Received message from Master: op=Filter serial=148551 16:36:04 Color wheel filter change from 0 to 0 16:36:04 FLIGetFilterPos err=0 currentPosition=0 16:36:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:36:04 Filter is already there-color wheel unchanged 16:36:04 Received message from Master: op=Shutter serial=148552 16:36:04 Shutter LASER open 16:36:05 Received message from Camera: op=State serial=148554 16:36:05 GetSingleValue result=40 Value=cccccccc 16:36:05 SkyScan query 16:36:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:36:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:05 Parameters OK 16:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:05 Set A/D data flow result=40 16:36:05 Set A/D channel type result=40 16:36:05 Set A/D encoding result=40 16:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:05 Set channel filter=0.000000e+000 result=40 16:36:05 Config A/D Result=40 16:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:05 Get A/D filter: -9.255963e+061 result=40 16:36:05 Get A/D value=-858993460 result=40 16:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:05 Parameters OK 16:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:05 Set A/D data flow result=40 16:36:05 Set A/D channel type result=40 16:36:05 Set A/D encoding result=40 16:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:05 Set channel filter=0.000000e+000 result=40 16:36:05 Config A/D Result=40 16:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:05 Get A/D filter: -9.255963e+061 result=40 16:36:05 Get A/D value=-858993460 result=40 16:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:36:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:36:05 Aux= 16:36:05 Message to Camera, serial 148554 queued 16:36:14 Received message from Master: op=Shutter serial=148564 16:36:14 Shutter LASER close 16:36:14 Received message from Master: op=PointingHead serial=148568 16:36:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:36:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:36:14 Point started: ret=0 16:36:14 point_skyscan result=0 16:36:15 Check angles 16:36:15 SkyScan query 16:36:16 SkyScan query done: ret=0 az=89.685<-5979 ze=156.945<-1537 Statuses=0009 0009 16:36:16 Msec=0 True Az=89.685 Ze=156.945 Az status=0009 Ze status=0009 16:36:16 Check angles 16:36:16 SkyScan query 16:36:17 SkyScan query done: ret=0 az=71.79<-4786 ze=135.54<-2964 Statuses=0009 0009 16:36:17 Msec=750 True Az=71.79 Ze=135.54 Az status=0009 Ze status=0009 16:36:17 Check angles 16:36:17 SkyScan query 16:36:17 SkyScan query done: ret=0 az=54.39<-3626 ze=114.525<-4365 Statuses=0009 0009 16:36:17 Msec=1500 True Az=54.39 Ze=114.525 Az status=0009 Ze status=0009 16:36:17 Check angles 16:36:17 SkyScan query 16:36:18 SkyScan query done: ret=0 az=41.025<-2735 ze=93.63<-5758 Statuses=0009 0009 16:36:18 Msec=2250 True Az=41.025 Ze=93.63 Az status=0009 Ze status=0009 16:36:18 Check angles 16:36:18 SkyScan query 16:36:19 SkyScan query done: ret=0 az=40.98<-2732 ze=72.24<-7184 Statuses=0008 0009 16:36:19 Msec=3000 True Az=40.98 Ze=72.24 Az status=0008 Ze status=0009 16:36:19 Check angles 16:36:19 SkyScan query 16:36:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.155<-8523 Statuses=0008 0009 16:36:20 Msec=3750 True Az=40.995 Ze=52.155 Az status=0008 Ze status=0009 16:36:20 Check angles 16:36:20 SkyScan query 16:36:20 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 16:36:20 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 16:36:20 Message to Master queued w/err=0: serial=148568 error=0 16:36:25 Received message from Master: op=Filter serial=148569 16:36:25 Color wheel filter change from 0 to 0 16:36:25 FLIGetFilterPos err=0 currentPosition=0 16:36:25 FLIGetStepsRemaining err=0 RemainingSteps=0 16:36:25 Filter is already there-color wheel unchanged 16:36:25 Received message from Master: op=Shutter serial=148570 16:36:25 Shutter LASER close 16:36:26 Received message from Camera: op=State serial=148572 16:36:26 GetSingleValue result=40 Value=cccccccc 16:36:26 SkyScan query 16:36:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:36:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:26 Parameters OK 16:36:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:26 Set A/D data flow result=40 16:36:26 Set A/D channel type result=40 16:36:26 Set A/D encoding result=40 16:36:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:26 Set channel filter=0.000000e+000 result=40 16:36:26 Config A/D Result=40 16:36:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:26 Get A/D filter: -9.255963e+061 result=40 16:36:26 Get A/D value=-858993460 result=40 16:36:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:26 Parameters OK 16:36:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:26 Set A/D data flow result=40 16:36:26 Set A/D channel type result=40 16:36:26 Set A/D encoding result=40 16:36:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:26 Set channel filter=0.000000e+000 result=40 16:36:26 Config A/D Result=40 16:36:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:26 Get A/D filter: -9.255963e+061 result=40 16:36:26 Get A/D value=-858993460 result=40 16:36:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:36:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:36:26 Aux= 16:36:26 Message to Camera, serial 148572 queued 16:37:03 Received message from Master: op=PointingHead serial=148585 16:37:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:37:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:37:03 Point started: ret=0 16:37:03 point_skyscan result=0 16:37:04 Check angles 16:37:04 SkyScan query 16:37:05 SkyScan query done: ret=0 az=63.96<-4264 ze=66.54<-7564 Statuses=0009 0008 16:37:05 Msec=0 True Az=63.96 Ze=66.54 Az status=0009 Ze status=0008 16:37:05 Check angles 16:37:05 SkyScan query 16:37:05 SkyScan query done: ret=0 az=81.6<-5440 ze=66.51<-7566 Statuses=0009 0008 16:37:05 Msec=750 True Az=81.6 Ze=66.51 Az status=0009 Ze status=0008 16:37:06 Check angles 16:37:06 SkyScan query 16:37:06 SkyScan query done: ret=0 az=99.285<-6619 ze=66.495<-7567 Statuses=0009 0008 16:37:06 Msec=1500 True Az=99.285 Ze=66.495 Az status=0009 Ze status=0008 16:37:06 Check angles 16:37:06 SkyScan query 16:37:07 SkyScan query done: ret=0 az=116.835<-7789 ze=66.495<-7567 Statuses=0009 0008 16:37:07 Msec=2250 True Az=116.835 Ze=66.495 Az status=0009 Ze status=0008 16:37:07 Check angles 16:37:07 SkyScan query 16:37:08 SkyScan query done: ret=0 az=134.355<-8957 ze=66.495<-7567 Statuses=0009 0008 16:37:08 Msec=3000 True Az=134.355 Ze=66.495 Az status=0009 Ze status=0008 16:37:08 Check angles 16:37:08 SkyScan query 16:37:09 SkyScan query done: ret=0 az=152.115<-10141 ze=66.495<-7567 Statuses=0009 0008 16:37:09 Msec=3750 True Az=152.115 Ze=66.495 Az status=0009 Ze status=0008 16:37:09 Check angles 16:37:09 SkyScan query 16:37:09 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:37:09 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:37:09 Message to Master queued w/err=0: serial=148585 error=0 16:37:14 Received message from Master: op=Filter serial=148586 16:37:14 Color wheel filter change from 0 to 0 16:37:14 FLIGetFilterPos err=0 currentPosition=0 16:37:14 FLIGetStepsRemaining err=0 RemainingSteps=0 16:37:14 Filter is already there-color wheel unchanged 16:37:14 Received message from Master: op=Shutter serial=148587 16:37:14 Shutter LASER close 16:37:14 Received message from Camera: op=State serial=148589 16:37:14 GetSingleValue result=40 Value=cccccccc 16:37:14 SkyScan query 16:37:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:37:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:15 Parameters OK 16:37:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:15 Set A/D data flow result=40 16:37:15 Set A/D channel type result=40 16:37:15 Set A/D encoding result=40 16:37:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:15 Set channel filter=0.000000e+000 result=40 16:37:15 Config A/D Result=40 16:37:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:15 Get A/D filter: -9.255963e+061 result=40 16:37:15 Get A/D value=-858993460 result=40 16:37:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:15 Parameters OK 16:37:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:15 Set A/D data flow result=40 16:37:15 Set A/D channel type result=40 16:37:15 Set A/D encoding result=40 16:37:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:15 Set channel filter=0.000000e+000 result=40 16:37:15 Config A/D Result=40 16:37:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:15 Get A/D filter: -9.255963e+061 result=40 16:37:15 Get A/D value=-858993460 result=40 16:37:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:37:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:37:15 Aux= 16:37:15 Message to Camera, serial 148589 queued 16:37:52 Received message from Master: op=PointingHead serial=148602 16:37:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:37:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:37:52 Point started: ret=0 16:37:52 point_skyscan result=0 16:37:53 Check angles 16:37:53 SkyScan query 16:37:54 SkyScan query done: ret=0 az=135.075<-9005 ze=36.84<-9544 Statuses=0009 0009 16:37:54 Msec=0 True Az=135.075 Ze=36.84 Az status=0009 Ze status=0009 16:37:54 Check angles 16:37:54 SkyScan query 16:37:54 SkyScan query done: ret=0 az=117.555<-7837 ze=15.9<-10940 Statuses=0009 0009 16:37:54 Msec=750 True Az=117.555 Ze=15.9 Az status=0009 Ze status=0009 16:37:54 Check angles 16:37:54 SkyScan query 16:37:55 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.505<-12367 Statuses=0009 0009 16:37:55 Msec=1500 True Az=99.825 Ze=-5.505 Az status=0009 Ze status=0009 16:37:55 Check angles 16:37:55 SkyScan query 16:37:56 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.46<-13764 Statuses=0009 0009 16:37:56 Msec=2250 True Az=82.335 Ze=-26.46 Az status=0009 Ze status=0009 16:37:56 Check angles 16:37:56 SkyScan query 16:37:57 SkyScan query done: ret=0 az=64.845<-4323 ze=-38.595<-14573 Statuses=0009 0008 16:37:57 Msec=3000 True Az=64.845 Ze=-38.595 Az status=0009 Ze status=0008 16:37:57 Check angles 16:37:57 SkyScan query 16:37:57 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.52<-14568 Statuses=0009 0008 16:37:57 Msec=3750 True Az=46.98 Ze=-38.52 Az status=0009 Ze status=0008 16:37:58 Check angles 16:37:58 SkyScan query 16:37:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:37:58 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:37:58 Message to Master queued w/err=0: serial=148602 error=0 16:38:03 Received message from Master: op=Filter serial=148603 16:38:03 Color wheel filter change from 0 to 0 16:38:03 FLIGetFilterPos err=0 currentPosition=0 16:38:03 FLIGetStepsRemaining err=0 RemainingSteps=0 16:38:03 Filter is already there-color wheel unchanged 16:38:03 Received message from Master: op=Shutter serial=148604 16:38:03 Shutter LASER close 16:38:03 Received message from Camera: op=State serial=148606 16:38:03 GetSingleValue result=40 Value=cccccccc 16:38:03 SkyScan query 16:38:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:38:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:04 Parameters OK 16:38:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:04 Set A/D data flow result=40 16:38:04 Set A/D channel type result=40 16:38:04 Set A/D encoding result=40 16:38:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:04 Set channel filter=0.000000e+000 result=40 16:38:04 Config A/D Result=40 16:38:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:04 Get A/D filter: -9.255963e+061 result=40 16:38:04 Get A/D value=-858993460 result=40 16:38:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:04 Parameters OK 16:38:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:04 Set A/D data flow result=40 16:38:04 Set A/D channel type result=40 16:38:04 Set A/D encoding result=40 16:38:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:04 Set channel filter=0.000000e+000 result=40 16:38:04 Config A/D Result=40 16:38:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:04 Get A/D filter: -9.255963e+061 result=40 16:38:04 Get A/D value=-858993460 result=40 16:38:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:38:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:38:04 Aux= 16:38:04 Message to Camera, serial 148606 queued 16:38:41 Received message from Master: op=PointingHead serial=148619 16:38:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:38:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:38:41 Point started: ret=0 16:38:41 point_skyscan result=0 16:38:42 Check angles 16:38:42 SkyScan query 16:38:42 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.58<-16572 Statuses=0009 0009 16:38:42 Msec=0 True Az=64.29 Ze=-68.58 Az status=0009 Ze status=0009 16:38:43 Check angles 16:38:43 SkyScan query 16:38:43 SkyScan query done: ret=0 az=82.2<-5480 ze=-89.955<-17997 Statuses=0009 0009 16:38:43 Msec=750 True Az=82.2 Ze=-89.955 Az status=0009 Ze status=0009 16:38:43 Check angles 16:38:43 SkyScan query 16:38:44 SkyScan query done: ret=0 az=99.63<-6642 ze=-110.925<-19395 Statuses=0009 0009 16:38:44 Msec=1500 True Az=99.63 Ze=-110.925 Az status=0009 Ze status=0009 16:38:44 Check angles 16:38:44 SkyScan query 16:38:45 SkyScan query done: ret=0 az=117.405<-7827 ze=-132.24<-20816 Statuses=0009 0009 16:38:45 Msec=2250 True Az=117.405 Ze=-132.24 Az status=0009 Ze status=0009 16:38:45 Check angles 16:38:45 SkyScan query 16:38:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.57<-21438 Statuses=0009 0008 16:38:45 Msec=3000 True Az=130.995 Ze=-141.57 Az status=0009 Ze status=0008 16:38:46 Check angles 16:38:46 SkyScan query 16:38:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 16:38:46 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 16:38:46 Message to Master queued w/err=0: serial=148619 error=0 16:38:51 Received message from Master: op=Filter serial=148620 16:38:51 Color wheel filter change from 0 to 0 16:38:51 FLIGetFilterPos err=0 currentPosition=0 16:38:51 FLIGetStepsRemaining err=0 RemainingSteps=0 16:38:51 Filter is already there-color wheel unchanged 16:38:51 Received message from Master: op=Shutter serial=148621 16:38:51 Shutter LASER close 16:38:51 Received message from Camera: op=State serial=148623 16:38:51 GetSingleValue result=40 Value=cccccccc 16:38:51 SkyScan query 16:38:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:38:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:52 Parameters OK 16:38:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:52 Set A/D data flow result=40 16:38:52 Set A/D channel type result=40 16:38:52 Set A/D encoding result=40 16:38:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:52 Set channel filter=0.000000e+000 result=40 16:38:52 Config A/D Result=40 16:38:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:52 Get A/D filter: -9.255963e+061 result=40 16:38:52 Get A/D value=-858993460 result=40 16:38:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:52 Parameters OK 16:38:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:52 Set A/D data flow result=40 16:38:52 Set A/D channel type result=40 16:38:52 Set A/D encoding result=40 16:38:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:52 Set channel filter=0.000000e+000 result=40 16:38:52 Config A/D Result=40 16:38:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:52 Get A/D filter: -9.255963e+061 result=40 16:38:52 Get A/D value=-858993460 result=40 16:38:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:38:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:38:52 Aux= 16:38:52 Message to Camera, serial 148623 queued 16:39:29 Received message from Master: op=PointingHead serial=148636 16:39:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:39:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:39:29 Point started: ret=0 16:39:29 point_skyscan result=0 16:39:30 Check angles 16:39:30 SkyScan query 16:39:31 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 16:39:31 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 16:39:31 Check angles 16:39:31 SkyScan query 16:39:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:39:31 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:39:31 Message to Master queued w/err=0: serial=148636 error=0 16:39:36 Received message from Master: op=Filter serial=148637 16:39:36 Color wheel filter change from 0 to 0 16:39:36 FLIGetFilterPos err=0 currentPosition=0 16:39:36 FLIGetStepsRemaining err=0 RemainingSteps=0 16:39:36 Filter is already there-color wheel unchanged 16:39:36 Received message from Master: op=Shutter serial=148638 16:39:36 Shutter LASER open 16:39:37 Received message from Camera: op=State serial=148640 16:39:37 GetSingleValue result=40 Value=cccccccc 16:39:37 SkyScan query 16:39:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:39:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:37 Parameters OK 16:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:37 Set A/D data flow result=40 16:39:37 Set A/D channel type result=40 16:39:37 Set A/D encoding result=40 16:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:37 Set channel filter=0.000000e+000 result=40 16:39:37 Config A/D Result=40 16:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:37 Get A/D filter: -9.255963e+061 result=40 16:39:37 Get A/D value=-858993460 result=40 16:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:37 Parameters OK 16:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:37 Set A/D data flow result=40 16:39:37 Set A/D channel type result=40 16:39:37 Set A/D encoding result=40 16:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:37 Set channel filter=0.000000e+000 result=40 16:39:37 Config A/D Result=40 16:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:37 Get A/D filter: -9.255963e+061 result=40 16:39:37 Get A/D value=-858993460 result=40 16:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:39:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:39:37 Aux= 16:39:37 Message to Camera, serial 148640 queued 16:39:46 Received message from Master: op=Shutter serial=148650 16:39:46 Shutter LASER close 16:39:46 Received message from Master: op=PointingHead serial=148654 16:39:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:39:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:39:47 Point started: ret=0 16:39:47 point_skyscan result=0 16:39:47 Check angles 16:39:47 SkyScan query 16:39:48 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.49<-21566 Statuses=0009 0009 16:39:48 Msec=0 True Az=135.915 Ze=-143.49 Az status=0009 Ze status=0009 16:39:48 Check angles 16:39:48 SkyScan query 16:39:49 SkyScan query done: ret=0 az=153.825<-10255 ze=-122.1<-20140 Statuses=0009 0009 16:39:49 Msec=750 True Az=153.825 Ze=-122.1 Az status=0009 Ze status=0009 16:39:49 Check angles 16:39:49 SkyScan query 16:39:49 SkyScan query done: ret=0 az=171.405<-11427 ze=-101.145<-18743 Statuses=0009 0009 16:39:49 Msec=1500 True Az=171.405 Ze=-101.145 Az status=0009 Ze status=0009 16:39:50 Check angles 16:39:50 SkyScan query 16:39:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.25<-17350 Statuses=0008 0009 16:39:50 Msec=2250 True Az=176.01 Ze=-80.25 Az status=0008 Ze status=0009 16:39:50 Check angles 16:39:50 SkyScan query 16:39:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.235<-15949 Statuses=0008 0009 16:39:51 Msec=3000 True Az=176.01 Ze=-59.235 Az status=0008 Ze status=0009 16:39:51 Check angles 16:39:51 SkyScan query 16:39:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:39:52 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:39:52 Message to Master queued w/err=0: serial=148654 error=0 16:39:57 Received message from Master: op=Filter serial=148655 16:39:57 Color wheel filter change from 0 to 0 16:39:57 FLIGetFilterPos err=0 currentPosition=0 16:39:57 FLIGetStepsRemaining err=0 RemainingSteps=0 16:39:57 Filter is already there-color wheel unchanged 16:39:57 Received message from Master: op=Shutter serial=148656 16:39:57 Shutter LASER close 16:39:57 Received message from Camera: op=State serial=148658 16:39:57 GetSingleValue result=40 Value=cccccccc 16:39:57 SkyScan query 16:39:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:39:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:58 Parameters OK 16:39:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:58 Set A/D data flow result=40 16:39:58 Set A/D channel type result=40 16:39:58 Set A/D encoding result=40 16:39:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:58 Set channel filter=0.000000e+000 result=40 16:39:58 Config A/D Result=40 16:39:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:58 Get A/D filter: -9.255963e+061 result=40 16:39:58 Get A/D value=-858993460 result=40 16:39:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:58 Parameters OK 16:39:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:58 Set A/D data flow result=40 16:39:58 Set A/D channel type result=40 16:39:58 Set A/D encoding result=40 16:39:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:58 Set channel filter=0.000000e+000 result=40 16:39:58 Config A/D Result=40 16:39:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:58 Get A/D filter: -9.255963e+061 result=40 16:39:58 Get A/D value=-858993460 result=40 16:39:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:39:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:39:58 Aux= 16:39:58 Message to Camera, serial 148658 queued 16:40:34 Received message from Master: op=PointingHead serial=148671 16:40:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:40:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:40:35 Point started: ret=0 16:40:35 point_skyscan result=0 16:40:36 Check angles 16:40:36 SkyScan query 16:40:36 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.465<-13431 Statuses=0009 0009 16:40:36 Msec=0 True Az=152.91 Ze=-21.465 Az status=0009 Ze status=0009 16:40:36 Check angles 16:40:36 SkyScan query 16:40:37 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.51<-12034 Statuses=0009 0009 16:40:37 Msec=750 True Az=135.42 Ze=-0.51 Az status=0009 Ze status=0009 16:40:37 Check angles 16:40:37 SkyScan query 16:40:38 SkyScan query done: ret=0 az=117.795<-7853 ze=20.46<-10636 Statuses=0009 0009 16:40:38 Msec=1500 True Az=117.795 Ze=20.46 Az status=0009 Ze status=0009 16:40:38 Check angles 16:40:38 SkyScan query 16:40:38 SkyScan query done: ret=0 az=100.425<-6695 ze=41.415<-9239 Statuses=0009 0009 16:40:38 Msec=2250 True Az=100.425 Ze=41.415 Az status=0009 Ze status=0009 16:40:39 Check angles 16:40:39 SkyScan query 16:40:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 16:40:39 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 16:40:39 Check angles 16:40:39 SkyScan query 16:40:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:40:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:40:40 Message to Master queued w/err=0: serial=148671 error=0 16:40:45 Received message from Master: op=Filter serial=148672 16:40:45 Color wheel filter change from 0 to 0 16:40:45 FLIGetFilterPos err=0 currentPosition=0 16:40:45 FLIGetStepsRemaining err=0 RemainingSteps=0 16:40:45 Filter is already there-color wheel unchanged 16:40:45 Received message from Master: op=Shutter serial=148673 16:40:45 Shutter LASER close 16:40:45 Received message from Camera: op=State serial=148675 16:40:45 GetSingleValue result=40 Value=cccccccc 16:40:45 SkyScan query 16:40:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:40:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:46 Parameters OK 16:40:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:46 Set A/D data flow result=40 16:40:46 Set A/D channel type result=40 16:40:46 Set A/D encoding result=40 16:40:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:46 Set channel filter=0.000000e+000 result=40 16:40:46 Config A/D Result=40 16:40:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:46 Get A/D filter: -9.255963e+061 result=40 16:40:46 Get A/D value=-858993460 result=40 16:40:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:46 Parameters OK 16:40:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:46 Set A/D data flow result=40 16:40:46 Set A/D channel type result=40 16:40:46 Set A/D encoding result=40 16:40:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:46 Set channel filter=0.000000e+000 result=40 16:40:46 Config A/D Result=40 16:40:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:46 Get A/D filter: -9.255963e+061 result=40 16:40:46 Get A/D value=-858993460 result=40 16:40:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:40:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:40:46 Aux= 16:40:46 Message to Camera, serial 148675 queued 16:41:23 Received message from Master: op=PointingHead serial=148688 16:41:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:41:23 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:41:23 Point started: ret=0 16:41:23 point_skyscan result=0 16:41:24 Check angles 16:41:24 SkyScan query 16:41:24 SkyScan query done: ret=0 az=108.765<-7251 ze=38.475<-9435 Statuses=0009 0008 16:41:24 Msec=0 True Az=108.765 Ze=38.475 Az status=0009 Ze status=0008 16:41:24 Check angles 16:41:24 SkyScan query 16:41:25 SkyScan query done: ret=0 az=126.345<-8423 ze=38.505<-9433 Statuses=0009 0008 16:41:25 Msec=750 True Az=126.345 Ze=38.505 Az status=0009 Ze status=0008 16:41:25 Check angles 16:41:25 SkyScan query 16:41:26 SkyScan query done: ret=0 az=144.12<-9608 ze=38.505<-9433 Statuses=0009 0008 16:41:26 Msec=1500 True Az=144.12 Ze=38.505 Az status=0009 Ze status=0008 16:41:26 Check angles 16:41:26 SkyScan query 16:41:26 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 16:41:26 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 16:41:27 Check angles 16:41:27 SkyScan query 16:41:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:41:27 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:41:27 Check angles 16:41:27 SkyScan query 16:41:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:41:28 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:41:28 Message to Master queued w/err=0: serial=148688 error=0 16:41:33 Received message from Master: op=Filter serial=148689 16:41:33 Color wheel filter change from 0 to 0 16:41:33 FLIGetFilterPos err=0 currentPosition=0 16:41:33 FLIGetStepsRemaining err=0 RemainingSteps=0 16:41:33 Filter is already there-color wheel unchanged 16:41:33 Received message from Master: op=Shutter serial=148690 16:41:33 Shutter LASER close 16:41:33 Received message from Camera: op=State serial=148692 16:41:33 GetSingleValue result=40 Value=cccccccc 16:41:33 SkyScan query 16:41:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:41:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:34 Parameters OK 16:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:34 Set A/D data flow result=40 16:41:34 Set A/D channel type result=40 16:41:34 Set A/D encoding result=40 16:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:34 Set channel filter=0.000000e+000 result=40 16:41:34 Config A/D Result=40 16:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:34 Get A/D filter: -9.255963e+061 result=40 16:41:34 Get A/D value=-858993460 result=40 16:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:34 Parameters OK 16:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:34 Set A/D data flow result=40 16:41:34 Set A/D channel type result=40 16:41:34 Set A/D encoding result=40 16:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:34 Set channel filter=0.000000e+000 result=40 16:41:34 Config A/D Result=40 16:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:34 Get A/D filter: -9.255963e+061 result=40 16:41:34 Get A/D value=-858993460 result=40 16:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:41:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:41:34 Aux= 16:41:34 Message to Camera, serial 148692 queued 16:42:11 Received message from Master: op=PointingHead serial=148705 16:42:11 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:42:11 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:42:11 Point started: ret=0 16:42:11 point_skyscan result=0 16:42:12 Check angles 16:42:12 SkyScan query 16:42:12 SkyScan query done: ret=0 az=153.285<-10219 ze=9.045<-11397 Statuses=0009 0009 16:42:12 Msec=0 True Az=153.285 Ze=9.045 Az status=0009 Ze status=0009 16:42:12 Check angles 16:42:12 SkyScan query 16:42:13 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.36<-12824 Statuses=0009 0009 16:42:13 Msec=750 True Az=135.36 Ze=-12.36 Az status=0009 Ze status=0009 16:42:13 Check angles 16:42:13 SkyScan query 16:42:14 SkyScan query done: ret=0 az=117.945<-7863 ze=-33.315<-14221 Statuses=0009 0009 16:42:14 Msec=1500 True Az=117.945 Ze=-33.315 Az status=0009 Ze status=0009 16:42:14 Check angles 16:42:14 SkyScan query 16:42:15 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.555<-15437 Statuses=0009 0009 16:42:15 Msec=2250 True Az=100.425 Ze=-51.555 Az status=0009 Ze status=0009 16:42:15 Check angles 16:42:15 SkyScan query 16:42:15 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 16:42:15 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 16:42:15 Check angles 16:42:15 SkyScan query 16:42:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:42:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:42:16 Message to Master queued w/err=0: serial=148705 error=0 16:42:21 Received message from Master: op=Filter serial=148706 16:42:21 Color wheel filter change from 0 to 0 16:42:21 FLIGetFilterPos err=0 currentPosition=0 16:42:21 FLIGetStepsRemaining err=0 RemainingSteps=0 16:42:21 Filter is already there-color wheel unchanged 16:42:21 Received message from Master: op=Shutter serial=148707 16:42:21 Shutter LASER close 16:42:21 Received message from Camera: op=State serial=148709 16:42:21 GetSingleValue result=40 Value=cccccccc 16:42:21 SkyScan query 16:42:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:42:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:22 Parameters OK 16:42:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:22 Set A/D data flow result=40 16:42:22 Set A/D channel type result=40 16:42:22 Set A/D encoding result=40 16:42:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:22 Set channel filter=0.000000e+000 result=40 16:42:22 Config A/D Result=40 16:42:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:22 Get A/D filter: -9.255963e+061 result=40 16:42:22 Get A/D value=-858993460 result=40 16:42:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:22 Parameters OK 16:42:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:22 Set A/D data flow result=40 16:42:22 Set A/D channel type result=40 16:42:22 Set A/D encoding result=40 16:42:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:22 Set channel filter=0.000000e+000 result=40 16:42:22 Config A/D Result=40 16:42:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:22 Get A/D filter: -9.255963e+061 result=40 16:42:22 Get A/D value=-858993460 result=40 16:42:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:42:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:42:22 Aux= 16:42:22 Message to Camera, serial 148709 queued 16:42:59 Received message from Master: op=PointingHead serial=148722 16:42:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:42:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:42:59 Point started: ret=0 16:42:59 point_skyscan result=0 16:43:00 Check angles 16:43:00 SkyScan query 16:43:00 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.12<-17408 Statuses=0009 0009 16:43:00 Msec=0 True Az=108.93 Ze=-81.12 Az status=0009 Ze status=0009 16:43:01 Check angles 16:43:01 SkyScan query 16:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 16:43:01 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 16:43:01 Check angles 16:43:01 SkyScan query 16:43:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.93<-20262 Statuses=0008 0009 16:43:02 Msec=1500 True Az=112.995 Ze=-123.93 Az status=0008 Ze status=0009 16:43:02 Check angles 16:43:02 SkyScan query 16:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.84<-21656 Statuses=0008 0009 16:43:03 Msec=2250 True Az=112.995 Ze=-144.84 Az status=0008 Ze status=0009 16:43:03 Check angles 16:43:03 SkyScan query 16:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.795<-23053 Statuses=0008 0009 16:43:03 Msec=3000 True Az=112.995 Ze=-165.795 Az status=0008 Ze status=0009 16:43:04 Check angles 16:43:04 SkyScan query 16:43:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:43:04 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:43:04 Message to Master queued w/err=0: serial=148722 error=0 16:43:09 Received message from Master: op=Filter serial=148723 16:43:09 Color wheel filter change from 0 to 0 16:43:09 FLIGetFilterPos err=0 currentPosition=0 16:43:09 FLIGetStepsRemaining err=0 RemainingSteps=0 16:43:09 Filter is already there-color wheel unchanged 16:43:09 Received message from Master: op=Shutter serial=148724 16:43:09 Shutter LASER open 16:43:09 Received message from Camera: op=State serial=148726 16:43:09 GetSingleValue result=40 Value=cccccccc 16:43:09 SkyScan query 16:43:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:43:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:10 Parameters OK 16:43:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:10 Set A/D data flow result=40 16:43:10 Set A/D channel type result=40 16:43:10 Set A/D encoding result=40 16:43:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:10 Set channel filter=0.000000e+000 result=40 16:43:10 Config A/D Result=40 16:43:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:10 Get A/D filter: -9.255963e+061 result=40 16:43:10 Get A/D value=-858993460 result=40 16:43:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:10 Parameters OK 16:43:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:10 Set A/D data flow result=40 16:43:10 Set A/D channel type result=40 16:43:10 Set A/D encoding result=40 16:43:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:10 Set channel filter=0.000000e+000 result=40 16:43:10 Config A/D Result=40 16:43:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:10 Get A/D filter: -9.255963e+061 result=40 16:43:10 Get A/D value=-858993460 result=40 16:43:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:43:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:43:10 Aux= 16:43:10 Message to Camera, serial 148726 queued 16:43:18 Received message from Master: op=Shutter serial=148735 16:43:18 Shutter LASER close 16:43:18 Received message from Master: op=PointingHead serial=148739 16:43:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:43:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:43:18 Point started: ret=0 16:43:18 point_skyscan result=0 16:43:19 Check angles 16:43:19 SkyScan query 16:43:20 SkyScan query done: ret=0 az=90.18<-6012 ze=157.485<-1501 Statuses=0009 0009 16:43:20 Msec=0 True Az=90.18 Ze=157.485 Az status=0009 Ze status=0009 16:43:20 Check angles 16:43:20 SkyScan query 16:43:20 SkyScan query done: ret=0 az=72.675<-4845 ze=136.515<-2899 Statuses=0009 0009 16:43:20 Msec=750 True Az=72.675 Ze=136.515 Az status=0009 Ze status=0009 16:43:21 Check angles 16:43:21 SkyScan query 16:43:21 SkyScan query done: ret=0 az=55.245<-3683 ze=115.62<-4292 Statuses=0009 0009 16:43:21 Msec=1500 True Az=55.245 Ze=115.62 Az status=0009 Ze status=0009 16:43:21 Check angles 16:43:21 SkyScan query 16:43:22 SkyScan query done: ret=0 az=41.025<-2735 ze=94.62<-5692 Statuses=0009 0009 16:43:22 Msec=2250 True Az=41.025 Ze=94.62 Az status=0009 Ze status=0009 16:43:22 Check angles 16:43:22 SkyScan query 16:43:23 SkyScan query done: ret=0 az=40.995<-2733 ze=73.665<-7089 Statuses=0008 0009 16:43:23 Msec=3000 True Az=40.995 Ze=73.665 Az status=0008 Ze status=0009 16:43:23 Check angles 16:43:23 SkyScan query 16:43:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.995<-8467 Statuses=0008 0009 16:43:23 Msec=3750 True Az=40.995 Ze=52.995 Az status=0008 Ze status=0009 16:43:24 Check angles 16:43:24 SkyScan query 16:43:24 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 16:43:24 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 16:43:24 Message to Master queued w/err=0: serial=148739 error=0 16:43:29 Received message from Master: op=Filter serial=148740 16:43:29 Color wheel filter change from 0 to 0 16:43:29 FLIGetFilterPos err=0 currentPosition=0 16:43:29 FLIGetStepsRemaining err=0 RemainingSteps=0 16:43:29 Filter is already there-color wheel unchanged 16:43:29 Received message from Master: op=Shutter serial=148741 16:43:29 Shutter LASER close 16:43:29 Received message from Camera: op=State serial=148743 16:43:29 GetSingleValue result=40 Value=cccccccc 16:43:29 SkyScan query 16:43:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:43:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:30 Parameters OK 16:43:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:30 Set A/D data flow result=40 16:43:30 Set A/D channel type result=40 16:43:30 Set A/D encoding result=40 16:43:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:30 Set channel filter=0.000000e+000 result=40 16:43:30 Config A/D Result=40 16:43:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:30 Get A/D filter: -9.255963e+061 result=40 16:43:30 Get A/D value=-858993460 result=40 16:43:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:30 Parameters OK 16:43:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:30 Set A/D data flow result=40 16:43:30 Set A/D channel type result=40 16:43:30 Set A/D encoding result=40 16:43:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:30 Set channel filter=0.000000e+000 result=40 16:43:30 Config A/D Result=40 16:43:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:30 Get A/D filter: -9.255963e+061 result=40 16:43:30 Get A/D value=-858993460 result=40 16:43:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:43:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:43:30 Aux= 16:43:30 Message to Camera, serial 148743 queued 16:44:07 Received message from Master: op=PointingHead serial=148756 16:44:07 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:44:07 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:44:07 Point started: ret=0 16:44:07 point_skyscan result=0 16:44:08 Check angles 16:44:08 SkyScan query 16:44:09 SkyScan query done: ret=0 az=63.765<-4251 ze=66.54<-7564 Statuses=0009 0008 16:44:09 Msec=0 True Az=63.765 Ze=66.54 Az status=0009 Ze status=0008 16:44:09 Check angles 16:44:09 SkyScan query 16:44:09 SkyScan query done: ret=0 az=81.21<-5414 ze=66.51<-7566 Statuses=0009 0008 16:44:09 Msec=750 True Az=81.21 Ze=66.51 Az status=0009 Ze status=0008 16:44:09 Check angles 16:44:09 SkyScan query 16:44:10 SkyScan query done: ret=0 az=99<-6600 ze=66.495<-7567 Statuses=0009 0008 16:44:10 Msec=1500 True Az=99 Ze=66.495 Az status=0009 Ze status=0008 16:44:10 Check angles 16:44:10 SkyScan query 16:44:11 SkyScan query done: ret=0 az=116.52<-7768 ze=66.495<-7567 Statuses=0009 0008 16:44:11 Msec=2250 True Az=116.52 Ze=66.495 Az status=0009 Ze status=0008 16:44:11 Check angles 16:44:11 SkyScan query 16:44:12 SkyScan query done: ret=0 az=134.01<-8934 ze=66.495<-7567 Statuses=0009 0008 16:44:12 Msec=3000 True Az=134.01 Ze=66.495 Az status=0009 Ze status=0008 16:44:12 Check angles 16:44:12 SkyScan query 16:44:12 SkyScan query done: ret=0 az=151.77<-10118 ze=66.495<-7567 Statuses=0009 0008 16:44:12 Msec=3750 True Az=151.77 Ze=66.495 Az status=0009 Ze status=0008 16:44:13 Check angles 16:44:13 SkyScan query 16:44:13 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:44:13 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:44:13 Message to Master queued w/err=0: serial=148756 error=0 16:44:18 Received message from Master: op=Filter serial=148757 16:44:18 Color wheel filter change from 0 to 0 16:44:18 FLIGetFilterPos err=0 currentPosition=0 16:44:18 FLIGetStepsRemaining err=0 RemainingSteps=0 16:44:18 Filter is already there-color wheel unchanged 16:44:18 Received message from Master: op=Shutter serial=148758 16:44:18 Shutter LASER close 16:44:18 Received message from Camera: op=State serial=148760 16:44:18 GetSingleValue result=40 Value=cccccccc 16:44:18 SkyScan query 16:44:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:44:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:19 Parameters OK 16:44:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:19 Set A/D data flow result=40 16:44:19 Set A/D channel type result=40 16:44:19 Set A/D encoding result=40 16:44:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:19 Set channel filter=0.000000e+000 result=40 16:44:19 Config A/D Result=40 16:44:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:19 Get A/D filter: -9.255963e+061 result=40 16:44:19 Get A/D value=-858993460 result=40 16:44:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:19 Parameters OK 16:44:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:19 Set A/D data flow result=40 16:44:19 Set A/D channel type result=40 16:44:19 Set A/D encoding result=40 16:44:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:19 Set channel filter=0.000000e+000 result=40 16:44:19 Config A/D Result=40 16:44:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:19 Get A/D filter: -9.255963e+061 result=40 16:44:19 Get A/D value=-858993460 result=40 16:44:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:19 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:44:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:44:19 Aux= 16:44:19 Message to Camera, serial 148760 queued 16:44:56 Received message from Master: op=PointingHead serial=148773 16:44:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:44:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:44:56 Point started: ret=0 16:44:56 point_skyscan result=0 16:44:57 Check angles 16:44:57 SkyScan query 16:44:57 SkyScan query done: ret=0 az=135.075<-9005 ze=36.84<-9544 Statuses=0009 0009 16:44:57 Msec=0 True Az=135.075 Ze=36.84 Az status=0009 Ze status=0009 16:44:58 Check angles 16:44:58 SkyScan query 16:44:58 SkyScan query done: ret=0 az=117.285<-7819 ze=15.51<-10966 Statuses=0009 0009 16:44:58 Msec=750 True Az=117.285 Ze=15.51 Az status=0009 Ze status=0009 16:44:58 Check angles 16:44:58 SkyScan query 16:44:59 SkyScan query done: ret=0 az=99.87<-6658 ze=-5.52<-12368 Statuses=0009 0009 16:44:59 Msec=1500 True Az=99.87 Ze=-5.52 Az status=0009 Ze status=0009 16:44:59 Check angles 16:44:59 SkyScan query 16:45:00 SkyScan query done: ret=0 az=82.395<-5493 ze=-26.46<-13764 Statuses=0009 0009 16:45:00 Msec=2250 True Az=82.395 Ze=-26.46 Az status=0009 Ze status=0009 16:45:00 Check angles 16:45:00 SkyScan query 16:45:00 SkyScan query done: ret=0 az=64.515<-4301 ze=-38.595<-14573 Statuses=0009 0008 16:45:00 Msec=3000 True Az=64.515 Ze=-38.595 Az status=0009 Ze status=0008 16:45:01 Check angles 16:45:01 SkyScan query 16:45:01 SkyScan query done: ret=0 az=47.055<-3137 ze=-38.52<-14568 Statuses=0009 0008 16:45:01 Msec=3750 True Az=47.055 Ze=-38.52 Az status=0009 Ze status=0008 16:45:01 Check angles 16:45:01 SkyScan query 16:45:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:45:02 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:45:02 Message to Master queued w/err=0: serial=148773 error=0 16:45:07 Received message from Master: op=Filter serial=148774 16:45:07 Color wheel filter change from 0 to 0 16:45:07 FLIGetFilterPos err=0 currentPosition=0 16:45:07 FLIGetStepsRemaining err=0 RemainingSteps=0 16:45:07 Filter is already there-color wheel unchanged 16:45:07 Received message from Master: op=Shutter serial=148775 16:45:07 Shutter LASER close 16:45:07 Received message from Camera: op=State serial=148777 16:45:07 GetSingleValue result=40 Value=cccccccc 16:45:07 SkyScan query 16:45:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:45:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:08 Parameters OK 16:45:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:08 Set A/D data flow result=40 16:45:08 Set A/D channel type result=40 16:45:08 Set A/D encoding result=40 16:45:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:08 Set channel filter=0.000000e+000 result=40 16:45:08 Config A/D Result=40 16:45:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:08 Get A/D filter: -9.255963e+061 result=40 16:45:08 Get A/D value=-858993460 result=40 16:45:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:08 Parameters OK 16:45:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:08 Set A/D data flow result=40 16:45:08 Set A/D channel type result=40 16:45:08 Set A/D encoding result=40 16:45:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:08 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-14 16:45:08] 16:45:08 Config A/D Result=40 16:45:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:08 Get A/D filter: -9.255963e+061 result=40 16:45:08 Get A/D value=-858993460 result=40 16:45:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:45:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:45:08 Aux= 16:45:08 Message to Camera, serial 148777 queued 16:45:27 Received message from Master: op=Identify serial=148778 16:45:44 Received message from Master: op=PointingHead serial=148792 16:45:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:45:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:45:44 Point started: ret=0 16:45:44 point_skyscan result=0 16:45:45 Check angles 16:45:45 SkyScan query 16:45:45 SkyScan query done: ret=0 az=63.75<-4250 ze=-68.07<-16538 Statuses=0009 0009 16:45:45 Msec=0 True Az=63.75 Ze=-68.07 Az status=0009 Ze status=0009 16:45:45 Check angles 16:45:45 SkyScan query 16:45:46 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.04<-17936 Statuses=0009 0009 16:45:46 Msec=750 True Az=81.285 Ze=-89.04 Az status=0009 Ze status=0009 16:45:46 Check angles 16:45:46 SkyScan query 16:45:47 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.445<-19363 Statuses=0009 0009 16:45:47 Msec=1500 True Az=99.06 Ze=-110.445 Az status=0009 Ze status=0009 16:45:47 Check angles 16:45:47 SkyScan query 16:45:48 SkyScan query done: ret=0 az=116.565<-7771 ze=-131.355<-20757 Statuses=0009 0009 16:45:48 Msec=2250 True Az=116.565 Ze=-131.355 Az status=0009 Ze status=0009 16:45:48 Check angles 16:45:48 SkyScan query 16:45:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.57<-21438 Statuses=0009 0008 16:45:48 Msec=3000 True Az=130.995 Ze=-141.57 Az status=0009 Ze status=0008 16:45:49 Check angles 16:45:49 SkyScan query 16:45:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 16:45:49 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 16:45:49 Message to Master queued w/err=0: serial=148792 error=0 16:45:54 Received message from Master: op=Filter serial=148793 16:45:54 Color wheel filter change from 0 to 0 16:45:54 FLIGetFilterPos err=0 currentPosition=0 16:45:54 FLIGetStepsRemaining err=0 RemainingSteps=0 16:45:54 Filter is already there-color wheel unchanged 16:45:54 Received message from Master: op=Shutter serial=148794 16:45:54 Shutter LASER close 16:45:54 Received message from Camera: op=State serial=148796 16:45:54 GetSingleValue result=40 Value=cccccccc 16:45:54 SkyScan query 16:45:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:45:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:55 Parameters OK 16:45:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:55 Set A/D data flow result=40 16:45:55 Set A/D channel type result=40 16:45:55 Set A/D encoding result=40 16:45:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:55 Set channel filter=0.000000e+000 result=40 16:45:55 Config A/D Result=40 16:45:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:55 Get A/D filter: -9.255963e+061 result=40 16:45:55 Get A/D value=-858993460 result=40 16:45:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:55 Parameters OK 16:45:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:55 Set A/D data flow result=40 16:45:55 Set A/D channel type result=40 16:45:55 Set A/D encoding result=40 16:45:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:55 Set channel filter=0.000000e+000 result=40 16:45:55 Config A/D Result=40 16:45:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:55 Get A/D filter: -9.255963e+061 result=40 16:45:55 Get A/D value=-858993460 result=40 16:45:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:45:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:45:55 Aux= 16:45:55 Message to Camera, serial 148796 queued 16:46:32 Received message from Master: op=PointingHead serial=148809 16:46:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:46:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:46:32 Point started: ret=0 16:46:32 point_skyscan result=0 16:46:33 Check angles 16:46:33 SkyScan query 16:46:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 16:46:33 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 16:46:34 Check angles 16:46:34 SkyScan query 16:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:46:34 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:46:34 Message to Master queued w/err=0: serial=148809 error=0 16:46:39 Received message from Master: op=Filter serial=148810 16:46:39 Color wheel filter change from 0 to 0 16:46:39 FLIGetFilterPos err=0 currentPosition=0 16:46:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:46:39 Filter is already there-color wheel unchanged 16:46:39 Received message from Master: op=Shutter serial=148811 16:46:39 Shutter LASER open 16:46:39 Received message from Camera: op=State serial=148813 16:46:39 GetSingleValue result=40 Value=cccccccc 16:46:39 SkyScan query 16:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:46:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:40 Parameters OK 16:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:40 Set A/D data flow result=40 16:46:40 Set A/D channel type result=40 16:46:40 Set A/D encoding result=40 16:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:40 Set channel filter=0.000000e+000 result=40 16:46:40 Config A/D Result=40 16:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:40 Get A/D filter: -9.255963e+061 result=40 16:46:40 Get A/D value=-858993460 result=40 16:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:40 Parameters OK 16:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:40 Set A/D data flow result=40 16:46:40 Set A/D channel type result=40 16:46:40 Set A/D encoding result=40 16:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:40 Set channel filter=0.000000e+000 result=40 16:46:40 Config A/D Result=40 16:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:40 Get A/D filter: -9.255963e+061 result=40 16:46:40 Get A/D value=-858993460 result=40 16:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:46:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:46:40 Aux= 16:46:40 Message to Camera, serial 148813 queued 16:46:48 Received message from Master: op=Shutter serial=148823 16:46:48 Shutter LASER close 16:46:49 Received message from Master: op=PointingHead serial=148827 16:46:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:46:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:46:49 Point started: ret=0 16:46:49 point_skyscan result=0 16:46:50 Check angles 16:46:50 SkyScan query 16:46:51 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.43<-21562 Statuses=0009 0009 16:46:51 Msec=0 True Az=135.78 Ze=-143.43 Az status=0009 Ze status=0009 16:46:51 Check angles 16:46:51 SkyScan query 16:46:52 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.43<-20162 Statuses=0009 0009 16:46:52 Msec=750 True Az=153.3 Ze=-122.43 Az status=0009 Ze status=0009 16:46:52 Check angles 16:46:52 SkyScan query 16:46:52 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.58<-18772 Statuses=0009 0009 16:46:52 Msec=1500 True Az=170.805 Ze=-101.58 Az status=0009 Ze status=0009 16:46:52 Check angles 16:46:52 SkyScan query 16:46:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.16<-17344 Statuses=0008 0009 16:46:53 Msec=2250 True Az=176.01 Ze=-80.16 Az status=0008 Ze status=0009 16:46:53 Check angles 16:46:53 SkyScan query 16:46:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 16:46:54 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 16:46:54 Check angles 16:46:54 SkyScan query 16:46:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:46:55 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:46:55 Message to Master queued w/err=0: serial=148827 error=0 16:47:00 Received message from Master: op=Filter serial=148828 16:47:00 Color wheel filter change from 0 to 0 16:47:00 FLIGetFilterPos err=0 currentPosition=0 16:47:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:47:00 Filter is already there-color wheel unchanged 16:47:00 Received message from Master: op=Shutter serial=148829 16:47:00 Shutter LASER close 16:47:00 Received message from Camera: op=State serial=148831 16:47:00 GetSingleValue result=40 Value=cccccccc 16:47:00 SkyScan query 16:47:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:47:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:00 Parameters OK 16:47:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:00 Set A/D data flow result=40 16:47:00 Set A/D channel type result=40 16:47:00 Set A/D encoding result=40 16:47:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:00 Set channel filter=0.000000e+000 result=40 16:47:00 Config A/D Result=40 16:47:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:00 Get A/D filter: -9.255963e+061 result=40 16:47:00 Get A/D value=-858993460 result=40 16:47:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:00 Parameters OK 16:47:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:00 Set A/D data flow result=40 16:47:00 Set A/D channel type result=40 16:47:00 Set A/D encoding result=40 16:47:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:00 Set channel filter=0.000000e+000 result=40 16:47:00 Config A/D Result=40 16:47:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:00 Get A/D filter: -9.255963e+061 result=40 16:47:00 Get A/D value=-858993460 result=40 16:47:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:47:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:47:00 Aux= 16:47:00 Message to Camera, serial 148831 queued 16:47:37 Received message from Master: op=PointingHead serial=148844 16:47:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:47:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:47:38 Point started: ret=0 16:47:38 point_skyscan result=0 16:47:38 Check angles 16:47:38 SkyScan query 16:47:39 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.795<-13453 Statuses=0009 0009 16:47:39 Msec=0 True Az=152.985 Ze=-21.795 Az status=0009 Ze status=0009 16:47:39 Check angles 16:47:39 SkyScan query 16:47:40 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.375<-12025 Statuses=0009 0009 16:47:40 Msec=750 True Az=135.12 Ze=-0.375 Az status=0009 Ze status=0009 16:47:40 Check angles 16:47:40 SkyScan query 16:47:41 SkyScan query done: ret=0 az=117.6<-7840 ze=20.595<-10627 Statuses=0009 0009 16:47:41 Msec=1500 True Az=117.6 Ze=20.595 Az status=0009 Ze status=0009 16:47:41 Check angles 16:47:41 SkyScan query 16:47:41 SkyScan query done: ret=0 az=100.2<-6680 ze=41.55<-9230 Statuses=0009 0009 16:47:41 Msec=2250 True Az=100.2 Ze=41.55 Az status=0009 Ze status=0009 16:47:41 Check angles 16:47:41 SkyScan query 16:47:42 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 16:47:42 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 16:47:42 Check angles 16:47:42 SkyScan query 16:47:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:47:43 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:47:43 Message to Master queued w/err=0: serial=148844 error=0 16:47:48 Received message from Master: op=Filter serial=148845 16:47:48 Color wheel filter change from 0 to 0 16:47:48 FLIGetFilterPos err=0 currentPosition=0 16:47:48 FLIGetStepsRemaining err=0 RemainingSteps=0 16:47:48 Filter is already there-color wheel unchanged 16:47:48 Received message from Master: op=Shutter serial=148846 16:47:48 Shutter LASER close 16:47:48 Received message from Camera: op=State serial=148848 16:47:48 GetSingleValue result=40 Value=cccccccc 16:47:48 SkyScan query 16:47:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:47:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:49 Parameters OK 16:47:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:49 Set A/D data flow result=40 16:47:49 Set A/D channel type result=40 16:47:49 Set A/D encoding result=40 16:47:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:49 Set channel filter=0.000000e+000 result=40 16:47:49 Config A/D Result=40 16:47:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:49 Get A/D filter: -9.255963e+061 result=40 16:47:49 Get A/D value=-858993460 result=40 16:47:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:49 Parameters OK 16:47:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:49 Set A/D data flow result=40 16:47:49 Set A/D channel type result=40 16:47:49 Set A/D encoding result=40 16:47:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:49 Set channel filter=0.000000e+000 result=40 16:47:49 Config A/D Result=40 16:47:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:49 Get A/D filter: -9.255963e+061 result=40 16:47:49 Get A/D value=-858993460 result=40 16:47:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:47:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:47:49 Aux= 16:47:49 Message to Camera, serial 148848 queued 16:48:25 Received message from Master: op=PointingHead serial=148861 16:48:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:48:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:48:26 Point started: ret=0 16:48:26 point_skyscan result=0 16:48:26 Check angles 16:48:26 SkyScan query 16:48:27 SkyScan query done: ret=0 az=108.705<-7247 ze=38.475<-9435 Statuses=0009 0008 16:48:27 Msec=0 True Az=108.705 Ze=38.475 Az status=0009 Ze status=0008 16:48:27 Check angles 16:48:27 SkyScan query 16:48:28 SkyScan query done: ret=0 az=126.27<-8418 ze=38.505<-9433 Statuses=0009 0008 16:48:28 Msec=750 True Az=126.27 Ze=38.505 Az status=0009 Ze status=0008 16:48:28 Check angles 16:48:28 SkyScan query 16:48:29 SkyScan query done: ret=0 az=143.79<-9586 ze=38.505<-9433 Statuses=0009 0008 16:48:29 Msec=1500 True Az=143.79 Ze=38.505 Az status=0009 Ze status=0008 16:48:29 Check angles 16:48:29 SkyScan query 16:48:29 SkyScan query done: ret=0 az=161.49<-10766 ze=38.505<-9433 Statuses=0009 0008 16:48:29 Msec=2250 True Az=161.49 Ze=38.505 Az status=0009 Ze status=0008 16:48:30 Check angles 16:48:30 SkyScan query 16:48:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:48:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:48:30 Check angles 16:48:30 SkyScan query 16:48:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:48:31 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:48:31 Message to Master queued w/err=0: serial=148861 error=0 16:48:36 Received message from Master: op=Filter serial=148862 16:48:36 Color wheel filter change from 0 to 0 16:48:36 FLIGetFilterPos err=0 currentPosition=0 16:48:36 FLIGetStepsRemaining err=0 RemainingSteps=0 16:48:36 Filter is already there-color wheel unchanged 16:48:36 Received message from Master: op=Shutter serial=148863 16:48:36 Shutter LASER close 16:48:36 Received message from Camera: op=State serial=148865 16:48:36 GetSingleValue result=40 Value=cccccccc 16:48:36 SkyScan query 16:48:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:48:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:37 Parameters OK 16:48:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:37 Set A/D data flow result=40 16:48:37 Set A/D channel type result=40 16:48:37 Set A/D encoding result=40 16:48:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:37 Set channel filter=0.000000e+000 result=40 16:48:37 Config A/D Result=40 16:48:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:37 Get A/D filter: -9.255963e+061 result=40 16:48:37 Get A/D value=-858993460 result=40 16:48:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:37 Parameters OK 16:48:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:37 Set A/D data flow result=40 16:48:37 Set A/D channel type result=40 16:48:37 Set A/D encoding result=40 16:48:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:37 Set channel filter=0.000000e+000 result=40 16:48:37 Config A/D Result=40 16:48:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:37 Get A/D filter: -9.255963e+061 result=40 16:48:37 Get A/D value=-858993460 result=40 16:48:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:48:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:48:37 Aux= 16:48:37 Message to Camera, serial 148865 queued 16:49:13 Received message from Master: op=PointingHead serial=148878 16:49:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:49:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:49:14 Point started: ret=0 16:49:14 point_skyscan result=0 16:49:15 Check angles 16:49:15 SkyScan query 16:49:15 SkyScan query done: ret=0 az=153.195<-10213 ze=9<-11400 Statuses=0009 0009 16:49:15 Msec=0 True Az=153.195 Ze=9 Az status=0009 Ze status=0009 16:49:15 Check angles 16:49:15 SkyScan query 16:49:16 SkyScan query done: ret=0 az=135.765<-9051 ze=-12.045<-12803 Statuses=0009 0009 16:49:16 Msec=750 True Az=135.765 Ze=-12.045 Az status=0009 Ze status=0009 16:49:16 Check angles 16:49:16 SkyScan query 16:49:17 SkyScan query done: ret=0 az=118.215<-7881 ze=-32.895<-14193 Statuses=0009 0009 16:49:17 Msec=1500 True Az=118.215 Ze=-32.895 Az status=0009 Ze status=0009 16:49:17 Check angles 16:49:17 SkyScan query 16:49:17 SkyScan query done: ret=0 az=100.8<-6720 ze=-51.51<-15434 Statuses=0009 0009 16:49:17 Msec=2250 True Az=100.8 Ze=-51.51 Az status=0009 Ze status=0009 16:49:18 Check angles 16:49:18 SkyScan query 16:49:18 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 16:49:18 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 16:49:18 Check angles 16:49:18 SkyScan query 16:49:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:49:19 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:49:19 Message to Master queued w/err=0: serial=148878 error=0 16:49:24 Received message from Master: op=Filter serial=148879 16:49:24 Color wheel filter change from 0 to 0 16:49:24 FLIGetFilterPos err=0 currentPosition=0 16:49:24 FLIGetStepsRemaining err=0 RemainingSteps=0 16:49:24 Filter is already there-color wheel unchanged 16:49:24 Received message from Master: op=Shutter serial=148880 16:49:24 Shutter LASER close 16:49:24 Received message from Camera: op=State serial=148882 16:49:24 GetSingleValue result=40 Value=cccccccc 16:49:24 SkyScan query 16:49:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:49:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:49:25 Parameters OK 16:49:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:49:25 Set A/D data flow result=40 16:49:25 Set A/D channel type result=40 16:49:25 Set A/D encoding result=40 16:49:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:49:25 Set channel filter=0.000000e+000 result=40 16:49:25 Config A/D Result=40 16:49:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:49:25 Get A/D filter: -9.255963e+061 result=40 16:49:25 Get A/D value=-858993460 result=40 16:49:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:49:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:49:25 Parameters OK 16:49:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:49:25 Set A/D data flow result=40 16:49:25 Set A/D channel type result=40 16:49:25 Set A/D encoding result=40 16:49:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:49:25 Set channel filter=0.000000e+000 result=40 16:49:25 Config A/D Result=40 16:49:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:49:25 Get A/D filter: -9.255963e+061 result=40 16:49:25 Get A/D value=-858993460 result=40 16:49:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:49:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:49:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:49:25 Aux= 16:49:25 Message to Camera, serial 148882 queued 16:50:02 Received message from Master: op=PointingHead serial=148895 16:50:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:50:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:50:02 Point started: ret=0 16:50:02 point_skyscan result=0 16:50:03 Check angles 16:50:03 SkyScan query 16:50:03 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.375<-17425 Statuses=0009 0009 16:50:03 Msec=0 True Az=109.125 Ze=-81.375 Az status=0009 Ze status=0009 16:50:03 Check angles 16:50:03 SkyScan query 16:50:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 16:50:04 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 16:50:04 Check angles 16:50:04 SkyScan query 16:50:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.735<-20249 Statuses=0008 0009 16:50:05 Msec=1500 True Az=112.995 Ze=-123.735 Az status=0008 Ze status=0009 16:50:05 Check angles 16:50:05 SkyScan query 16:50:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 16:50:05 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 16:50:06 Check angles 16:50:06 SkyScan query 16:50:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.02<-23068 Statuses=0008 0009 16:50:06 Msec=3000 True Az=112.995 Ze=-166.02 Az status=0008 Ze status=0009 16:50:06 Check angles 16:50:06 SkyScan query 16:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:50:07 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:50:07 Message to Master queued w/err=0: serial=148895 error=0 16:50:12 Received message from Master: op=Filter serial=148896 16:50:12 Color wheel filter change from 0 to 0 16:50:12 FLIGetFilterPos err=0 currentPosition=0 16:50:12 FLIGetStepsRemaining err=0 RemainingSteps=0 16:50:12 Filter is already there-color wheel unchanged 16:50:12 Received message from Master: op=Shutter serial=148897 16:50:12 Shutter LASER open 16:50:12 Received message from Camera: op=State serial=148899 16:50:12 GetSingleValue result=40 Value=cccccccc 16:50:12 SkyScan query 16:50:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:50:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:13 Parameters OK 16:50:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:13 Set A/D data flow result=40 16:50:13 Set A/D channel type result=40 16:50:13 Set A/D encoding result=40 16:50:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:13 Set channel filter=0.000000e+000 result=40 16:50:13 Config A/D Result=40 16:50:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:13 Get A/D filter: -9.255963e+061 result=40 16:50:13 Get A/D value=-858993460 result=40 16:50:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:13 Parameters OK 16:50:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:13 Set A/D data flow result=40 16:50:13 Set A/D channel type result=40 16:50:13 Set A/D encoding result=40 16:50:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:13 Set channel filter=0.000000e+000 result=40 16:50:13 Config A/D Result=40 16:50:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:13 Get A/D filter: -9.255963e+061 result=40 16:50:13 Get A/D value=-858993460 result=40 16:50:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:50:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:50:13 Aux= 16:50:13 Message to Camera, serial 148899 queued 16:50:21 Received message from Master: op=Shutter serial=148909 16:50:21 Shutter LASER close 16:50:22 Received message from Master: op=PointingHead serial=148913 16:50:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:50:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:50:22 Point started: ret=0 16:50:22 point_skyscan result=0 16:50:23 Check angles 16:50:23 SkyScan query 16:50:24 SkyScan query done: ret=0 az=90.105<-6007 ze=157.44<-1504 Statuses=0009 0009 16:50:24 Msec=0 True Az=90.105 Ze=157.44 Az status=0009 Ze status=0009 16:50:24 Check angles 16:50:24 SkyScan query 16:50:24 SkyScan query done: ret=0 az=72.69<-4846 ze=136.455<-2903 Statuses=0009 0009 16:50:24 Msec=750 True Az=72.69 Ze=136.455 Az status=0009 Ze status=0009 16:50:24 Check angles 16:50:24 SkyScan query 16:50:25 SkyScan query done: ret=0 az=55.26<-3684 ze=115.56<-4296 Statuses=0009 0009 16:50:25 Msec=1500 True Az=55.26 Ze=115.56 Az status=0009 Ze status=0009 16:50:25 Check angles 16:50:25 SkyScan query 16:50:26 SkyScan query done: ret=0 az=40.98<-2732 ze=94.545<-5697 Statuses=0009 0009 16:50:26 Msec=2250 True Az=40.98 Ze=94.545 Az status=0009 Ze status=0009 16:50:26 Check angles 16:50:26 SkyScan query 16:50:27 SkyScan query done: ret=0 az=40.995<-2733 ze=73.62<-7092 Statuses=0008 0009 16:50:27 Msec=3000 True Az=40.995 Ze=73.62 Az status=0008 Ze status=0009 16:50:27 Check angles 16:50:27 SkyScan query 16:50:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.965<-8469 Statuses=0008 0009 16:50:27 Msec=3750 True Az=40.995 Ze=52.965 Az status=0008 Ze status=0009 16:50:27 Check angles 16:50:27 SkyScan query 16:50:28 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 16:50:28 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 16:50:28 Message to Master queued w/err=0: serial=148913 error=0 16:50:33 Received message from Master: op=Filter serial=148914 16:50:33 Color wheel filter change from 0 to 0 16:50:33 FLIGetFilterPos err=0 currentPosition=0 16:50:33 FLIGetStepsRemaining err=0 RemainingSteps=0 16:50:33 Filter is already there-color wheel unchanged 16:50:33 Received message from Master: op=Shutter serial=148915 16:50:33 Shutter LASER close 16:50:33 Received message from Camera: op=State serial=148917 16:50:33 GetSingleValue result=40 Value=cccccccc 16:50:33 SkyScan query 16:50:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:50:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:34 Parameters OK 16:50:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:34 Set A/D data flow result=40 16:50:34 Set A/D channel type result=40 16:50:34 Set A/D encoding result=40 16:50:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:34 Set channel filter=0.000000e+000 result=40 16:50:34 Config A/D Result=40 16:50:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:34 Get A/D filter: -9.255963e+061 result=40 16:50:34 Get A/D value=-858993460 result=40 16:50:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:34 Parameters OK 16:50:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:34 Set A/D data flow result=40 16:50:34 Set A/D channel type result=40 16:50:34 Set A/D encoding result=40 16:50:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:34 Set channel filter=0.000000e+000 result=40 16:50:34 Config A/D Result=40 16:50:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:34 Get A/D filter: -9.255963e+061 result=40 16:50:34 Get A/D value=-858993460 result=40 16:50:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:50:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:50:34 Aux= 16:50:34 Message to Camera, serial 148917 queued 16:51:11 Received message from Master: op=PointingHead serial=148930 16:51:11 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:51:11 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:51:11 Point started: ret=0 16:51:11 point_skyscan result=0 16:51:12 Check angles 16:51:12 SkyScan query 16:51:12 SkyScan query done: ret=0 az=63.78<-4252 ze=66.555<-7563 Statuses=0009 0008 16:51:12 Msec=0 True Az=63.78 Ze=66.555 Az status=0009 Ze status=0008 16:51:13 Check angles 16:51:13 SkyScan query 16:51:13 SkyScan query done: ret=0 az=81.645<-5443 ze=66.51<-7566 Statuses=0009 0008 16:51:13 Msec=750 True Az=81.645 Ze=66.51 Az status=0009 Ze status=0008 16:51:13 Check angles 16:51:13 SkyScan query 16:51:14 SkyScan query done: ret=0 az=99.06<-6604 ze=66.495<-7567 Statuses=0009 0008 16:51:14 Msec=1500 True Az=99.06 Ze=66.495 Az status=0009 Ze status=0008 16:51:14 Check angles 16:51:14 SkyScan query 16:51:15 SkyScan query done: ret=0 az=116.91<-7794 ze=66.495<-7567 Statuses=0009 0008 16:51:15 Msec=2250 True Az=116.91 Ze=66.495 Az status=0009 Ze status=0008 16:51:15 Check angles 16:51:15 SkyScan query 16:51:15 SkyScan query done: ret=0 az=134.79<-8986 ze=66.495<-7567 Statuses=0009 0008 16:51:15 Msec=3000 True Az=134.79 Ze=66.495 Az status=0009 Ze status=0008 16:51:16 Check angles 16:51:16 SkyScan query 16:51:16 SkyScan query done: ret=0 az=152.595<-10173 ze=66.495<-7567 Statuses=0009 0008 16:51:16 Msec=3750 True Az=152.595 Ze=66.495 Az status=0009 Ze status=0008 16:51:16 Check angles 16:51:16 SkyScan query 16:51:17 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:51:17 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:51:17 Message to Master queued w/err=0: serial=148930 error=0 16:51:22 Received message from Master: op=Filter serial=148931 16:51:22 Color wheel filter change from 0 to 0 16:51:22 FLIGetFilterPos err=0 currentPosition=0 16:51:22 FLIGetStepsRemaining err=0 RemainingSteps=0 16:51:22 Filter is already there-color wheel unchanged 16:51:22 Received message from Master: op=Shutter serial=148932 16:51:22 Shutter LASER close 16:51:22 Received message from Camera: op=State serial=148934 16:51:22 GetSingleValue result=40 Value=cccccccc 16:51:22 SkyScan query 16:51:23 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:51:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:23 Parameters OK 16:51:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:23 Set A/D data flow result=40 16:51:23 Set A/D channel type result=40 16:51:23 Set A/D encoding result=40 16:51:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:23 Set channel filter=0.000000e+000 result=40 16:51:23 Config A/D Result=40 16:51:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:23 Get A/D filter: -9.255963e+061 result=40 16:51:23 Get A/D value=-858993460 result=40 16:51:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:23 Parameters OK 16:51:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:23 Set A/D data flow result=40 16:51:23 Set A/D channel type result=40 16:51:23 Set A/D encoding result=40 16:51:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:23 Set channel filter=0.000000e+000 result=40 16:51:23 Config A/D Result=40 16:51:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:23 Get A/D filter: -9.255963e+061 result=40 16:51:23 Get A/D value=-858993460 result=40 16:51:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:23 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:51:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:51:23 Aux= 16:51:23 Message to Camera, serial 148934 queued 16:52:00 Received message from Master: op=PointingHead serial=148947 16:52:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:52:00 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:52:00 Point started: ret=0 16:52:00 point_skyscan result=0 16:52:01 Check angles 16:52:01 SkyScan query 16:52:01 SkyScan query done: ret=0 az=134.565<-8971 ze=36.3<-9580 Statuses=0009 0009 16:52:01 Msec=0 True Az=134.565 Ze=36.3 Az status=0009 Ze status=0009 16:52:01 Check angles 16:52:01 SkyScan query 16:52:02 SkyScan query done: ret=0 az=117.06<-7804 ze=15.435<-10971 Statuses=0009 0009 16:52:02 Msec=750 True Az=117.06 Ze=15.435 Az status=0009 Ze status=0009 16:52:02 Check angles 16:52:02 SkyScan query 16:52:03 SkyScan query done: ret=0 az=99.39<-6626 ze=-6.09<-12406 Statuses=0009 0009 16:52:03 Msec=1500 True Az=99.39 Ze=-6.09 Az status=0009 Ze status=0009 16:52:03 Check angles 16:52:03 SkyScan query 16:52:04 SkyScan query done: ret=0 az=81.975<-5465 ze=-27.06<-13804 Statuses=0009 0009 16:52:04 Msec=2250 True Az=81.975 Ze=-27.06 Az status=0009 Ze status=0009 16:52:04 Check angles 16:52:04 SkyScan query 16:52:04 SkyScan query done: ret=0 az=64.38<-4292 ze=-38.595<-14573 Statuses=0009 0008 16:52:04 Msec=3000 True Az=64.38 Ze=-38.595 Az status=0009 Ze status=0008 16:52:04 Check angles 16:52:04 SkyScan query 16:52:05 SkyScan query done: ret=0 az=46.965<-3131 ze=-38.52<-14568 Statuses=0009 0008 16:52:05 Msec=3750 True Az=46.965 Ze=-38.52 Az status=0009 Ze status=0008 16:52:05 Check angles 16:52:05 SkyScan query 16:52:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:52:06 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:52:06 Message to Master queued w/err=0: serial=148947 error=0 16:52:11 Received message from Master: op=Filter serial=148948 16:52:11 Color wheel filter change from 0 to 0 16:52:11 FLIGetFilterPos err=0 currentPosition=0 16:52:11 FLIGetStepsRemaining err=0 RemainingSteps=0 16:52:11 Filter is already there-color wheel unchanged 16:52:11 Received message from Master: op=Shutter serial=148949 16:52:11 Shutter LASER close 16:52:11 Received message from Camera: op=State serial=148951 16:52:11 GetSingleValue result=40 Value=cccccccc 16:52:11 SkyScan query 16:52:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:52:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:12 Parameters OK 16:52:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:12 Set A/D data flow result=40 16:52:12 Set A/D channel type result=40 16:52:12 Set A/D encoding result=40 16:52:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:12 Set channel filter=0.000000e+000 result=40 16:52:12 Config A/D Result=40 16:52:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:12 Get A/D filter: -9.255963e+061 result=40 16:52:12 Get A/D value=-858993460 result=40 16:52:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:12 Parameters OK 16:52:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:12 Set A/D data flow result=40 16:52:12 Set A/D channel type result=40 16:52:12 Set A/D encoding result=40 16:52:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:12 Set channel filter=0.000000e+000 result=40 16:52:12 Config A/D Result=40 16:52:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:12 Get A/D filter: -9.255963e+061 result=40 16:52:12 Get A/D value=-858993460 result=40 16:52:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:52:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:52:12 Aux= 16:52:12 Message to Camera, serial 148951 queued 16:52:48 Received message from Master: op=PointingHead serial=148964 16:52:48 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:52:48 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:52:49 Point started: ret=0 16:52:49 point_skyscan result=0 16:52:50 Check angles 16:52:50 SkyScan query 16:52:50 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.16<-16544 Statuses=0009 0009 16:52:50 Msec=0 True Az=63.915 Ze=-68.16 Az status=0009 Ze status=0009 16:52:50 Check angles 16:52:50 SkyScan query 16:52:51 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.16<-17944 Statuses=0009 0009 16:52:51 Msec=750 True Az=81.315 Ze=-89.16 Az status=0009 Ze status=0009 16:52:51 Check angles 16:52:51 SkyScan query 16:52:52 SkyScan query done: ret=0 az=98.79<-6586 ze=-110.055<-19337 Statuses=0009 0009 16:52:52 Msec=1500 True Az=98.79 Ze=-110.055 Az status=0009 Ze status=0009 16:52:52 Check angles 16:52:52 SkyScan query 16:52:52 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.445<-20763 Statuses=0009 0009 16:52:52 Msec=2250 True Az=116.64 Ze=-131.445 Az status=0009 Ze status=0009 16:52:53 Check angles 16:52:53 SkyScan query 16:52:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 16:52:53 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 16:52:53 Check angles 16:52:53 SkyScan query 16:52:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 16:52:54 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 16:52:54 Message to Master queued w/err=0: serial=148964 error=0 16:52:59 Received message from Master: op=Filter serial=148965 16:52:59 Color wheel filter change from 0 to 0 16:52:59 FLIGetFilterPos err=0 currentPosition=0 16:52:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:52:59 Filter is already there-color wheel unchanged 16:52:59 Received message from Master: op=Shutter serial=148966 16:52:59 Shutter LASER close 16:52:59 Received message from Camera: op=State serial=148968 16:52:59 GetSingleValue result=40 Value=cccccccc 16:52:59 SkyScan query 16:53:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:53:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:00 Parameters OK 16:53:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:00 Set A/D data flow result=40 16:53:00 Set A/D channel type result=40 16:53:00 Set A/D encoding result=40 16:53:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:00 Set channel filter=0.000000e+000 result=40 16:53:00 Config A/D Result=40 16:53:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:00 Get A/D filter: -9.255963e+061 result=40 16:53:00 Get A/D value=-858993460 result=40 16:53:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:00 Parameters OK 16:53:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:00 Set A/D data flow result=40 16:53:00 Set A/D channel type result=40 16:53:00 Set A/D encoding result=40 16:53:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:00 Set channel filter=0.000000e+000 result=40 16:53:00 Config A/D Result=40 16:53:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:00 Get A/D filter: -9.255963e+061 result=40 16:53:00 Get A/D value=-858993460 result=40 16:53:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:53:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:53:00 Aux= 16:53:00 Message to Camera, serial 148968 queued 16:53:36 Received message from Master: op=PointingHead serial=148981 16:53:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:53:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:53:37 Point started: ret=0 16:53:37 point_skyscan result=0 16:53:38 Check angles 16:53:38 SkyScan query 16:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.39<-23426 Statuses=0009 0009 16:53:38 Msec=0 True Az=112.995 Ze=-171.39 Az status=0009 Ze status=0009 16:53:38 Check angles 16:53:38 SkyScan query 16:53:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:53:39 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:53:39 Message to Master queued w/err=0: serial=148981 error=0 16:53:44 Received message from Master: op=Filter serial=148982 16:53:44 Color wheel filter change from 0 to 0 16:53:44 FLIGetFilterPos err=0 currentPosition=0 16:53:44 FLIGetStepsRemaining err=0 RemainingSteps=0 16:53:44 Filter is already there-color wheel unchanged 16:53:44 Received message from Master: op=Shutter serial=148983 16:53:44 Shutter LASER open 16:53:44 Received message from Camera: op=State serial=148985 16:53:44 GetSingleValue result=40 Value=cccccccc 16:53:44 SkyScan query 16:53:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:53:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:45 Parameters OK 16:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:45 Set A/D data flow result=40 16:53:45 Set A/D channel type result=40 16:53:45 Set A/D encoding result=40 16:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:45 Set channel filter=0.000000e+000 result=40 16:53:45 Config A/D Result=40 16:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:45 Get A/D filter: -9.255963e+061 result=40 16:53:45 Get A/D value=-858993460 result=40 16:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:45 Parameters OK 16:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:45 Set A/D data flow result=40 16:53:45 Set A/D channel type result=40 16:53:45 Set A/D encoding result=40 16:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:45 Set channel filter=0.000000e+000 result=40 16:53:45 Config A/D Result=40 16:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:45 Get A/D filter: -9.255963e+061 result=40 16:53:45 Get A/D value=-858993460 result=40 16:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:53:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:53:45 Aux= 16:53:45 Message to Camera, serial 148985 queued 16:53:53 Received message from Master: op=Shutter serial=148995 16:53:53 Shutter LASER close 16:53:54 Received message from Master: op=PointingHead serial=148999 16:53:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:53:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:53:54 Point started: ret=0 16:53:54 point_skyscan result=0 16:53:55 Check angles 16:53:55 SkyScan query 16:53:56 SkyScan query done: ret=0 az=136.125<-9075 ze=-143.115<-21541 Statuses=0009 0009 16:53:56 Msec=0 True Az=136.125 Ze=-143.115 Az status=0009 Ze status=0009 16:53:56 Check angles 16:53:56 SkyScan query 16:53:56 SkyScan query done: ret=0 az=153.975<-10265 ze=-121.695<-20113 Statuses=0009 0009 16:53:56 Msec=750 True Az=153.975 Ze=-121.695 Az status=0009 Ze status=0009 16:53:56 Check angles 16:53:56 SkyScan query 16:53:57 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.62<-18708 Statuses=0009 0009 16:53:57 Msec=1500 True Az=171.495 Ze=-100.62 Az status=0009 Ze status=0009 16:53:57 Check angles 16:53:57 SkyScan query 16:53:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.8<-17320 Statuses=0008 0009 16:53:58 Msec=2250 True Az=176.01 Ze=-79.8 Az status=0008 Ze status=0009 16:53:58 Check angles 16:53:58 SkyScan query 16:53:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.365<-15891 Statuses=0008 0009 16:53:59 Msec=3000 True Az=176.01 Ze=-58.365 Az status=0008 Ze status=0009 16:53:59 Check angles 16:53:59 SkyScan query 16:53:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 16:53:59 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 16:53:59 Message to Master queued w/err=0: serial=148999 error=0 16:54:04 Received message from Master: op=Filter serial=149000 16:54:04 Color wheel filter change from 0 to 0 16:54:04 FLIGetFilterPos err=0 currentPosition=0 16:54:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:54:04 Filter is already there-color wheel unchanged 16:54:05 Received message from Master: op=Shutter serial=149001 16:54:05 Shutter LASER close 16:54:05 Received message from Camera: op=State serial=149003 16:54:05 GetSingleValue result=40 Value=cccccccc 16:54:05 SkyScan query 16:54:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:54:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:05 Parameters OK 16:54:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:05 Set A/D data flow result=40 16:54:05 Set A/D channel type result=40 16:54:05 Set A/D encoding result=40 16:54:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:05 Set channel filter=0.000000e+000 result=40 16:54:05 Config A/D Result=40 16:54:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:05 Get A/D filter: -9.255963e+061 result=40 16:54:05 Get A/D value=-858993460 result=40 16:54:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:05 Parameters OK 16:54:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:05 Set A/D data flow result=40 16:54:05 Set A/D channel type result=40 16:54:05 Set A/D encoding result=40 16:54:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:05 Set channel filter=0.000000e+000 result=40 16:54:05 Config A/D Result=40 16:54:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:05 Get A/D filter: -9.255963e+061 result=40 16:54:05 Get A/D value=-858993460 result=40 16:54:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:54:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:54:05 Aux= 16:54:05 Message to Camera, serial 149003 queued 16:54:42 Received message from Master: op=PointingHead serial=149016 16:54:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:54:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:54:43 Point started: ret=0 16:54:43 point_skyscan result=0 16:54:43 Check angles 16:54:43 SkyScan query 16:54:44 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.645<-13443 Statuses=0009 0009 16:54:44 Msec=0 True Az=152.94 Ze=-21.645 Az status=0009 Ze status=0009 16:54:44 Check angles 16:54:44 SkyScan query 16:54:45 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.675<-12045 Statuses=0009 0009 16:54:45 Msec=750 True Az=135.45 Ze=-0.675 Az status=0009 Ze status=0009 16:54:45 Check angles 16:54:45 SkyScan query 16:54:45 SkyScan query done: ret=0 az=117.81<-7854 ze=20.295<-10647 Statuses=0009 0009 16:54:45 Msec=1500 True Az=117.81 Ze=20.295 Az status=0009 Ze status=0009 16:54:46 Check angles 16:54:46 SkyScan query 16:54:46 SkyScan query done: ret=0 az=100.455<-6697 ze=41.25<-9250 Statuses=0009 0009 16:54:46 Msec=2250 True Az=100.455 Ze=41.25 Az status=0009 Ze status=0009 16:54:46 Check angles 16:54:46 SkyScan query 16:54:47 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:54:47 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:54:47 Check angles 16:54:47 SkyScan query 16:54:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:54:48 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:54:48 Message to Master queued w/err=0: serial=149016 error=0 16:54:53 Received message from Master: op=Filter serial=149017 16:54:53 Color wheel filter change from 0 to 0 16:54:53 FLIGetFilterPos err=0 currentPosition=0 16:54:53 FLIGetStepsRemaining err=0 RemainingSteps=0 16:54:53 Filter is already there-color wheel unchanged 16:54:53 Received message from Master: op=Shutter serial=149018 16:54:53 Shutter LASER close 16:54:53 Received message from Camera: op=State serial=149020 16:54:53 GetSingleValue result=40 Value=cccccccc 16:54:53 SkyScan query 16:54:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:54:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:53 Parameters OK 16:54:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:53 Set A/D data flow result=40 16:54:53 Set A/D channel type result=40 16:54:53 Set A/D encoding result=40 16:54:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:53 Set channel filter=0.000000e+000 result=40 16:54:53 Config A/D Result=40 16:54:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:53 Get A/D filter: -9.255963e+061 result=40 16:54:53 Get A/D value=-858993460 result=40 16:54:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:53 Parameters OK 16:54:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:53 Set A/D data flow result=40 16:54:53 Set A/D channel type result=40 16:54:53 Set A/D encoding result=40 16:54:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:53 Set channel filter=0.000000e+000 result=40 16:54:53 Config A/D Result=40 16:54:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:53 Get A/D filter: -9.255963e+061 result=40 16:54:53 Get A/D value=-858993460 result=40 16:54:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:54:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:54:53 Aux= 16:54:53 Message to Camera, serial 149020 queued 16:55:30 Received message from Master: op=PointingHead serial=149033 16:55:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:55:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:55:31 Point started: ret=0 16:55:31 point_skyscan result=0 16:55:31 Check angles 16:55:31 SkyScan query 16:55:32 SkyScan query done: ret=0 az=109.245<-7283 ze=38.49<-9434 Statuses=0009 0008 16:55:32 Msec=0 True Az=109.245 Ze=38.49 Az status=0009 Ze status=0008 [UTC 2018-12-14 16:55:32] 16:55:32 Check angles 16:55:32 SkyScan query 16:55:33 SkyScan query done: ret=0 az=128.04<-8536 ze=38.505<-9433 Statuses=0009 0008 16:55:33 Msec=750 True Az=128.04 Ze=38.505 Az status=0009 Ze status=0008 16:55:33 Check angles 16:55:33 SkyScan query 16:55:33 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 16:55:33 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 16:55:34 Check angles 16:55:34 SkyScan query 16:55:34 SkyScan query done: ret=0 az=161.985<-10799 ze=38.505<-9433 Statuses=0009 0008 16:55:34 Msec=2250 True Az=161.985 Ze=38.505 Az status=0009 Ze status=0008 16:55:34 Check angles 16:55:34 SkyScan query 16:55:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:55:35 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:55:35 Check angles 16:55:35 SkyScan query 16:55:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:55:36 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:55:36 Message to Master queued w/err=0: serial=149033 error=0 16:55:41 Received message from Master: op=Filter serial=149034 16:55:41 Color wheel filter change from 0 to 0 16:55:41 FLIGetFilterPos err=0 currentPosition=0 16:55:41 FLIGetStepsRemaining err=0 RemainingSteps=0 16:55:41 Filter is already there-color wheel unchanged 16:55:41 Received message from Master: op=Shutter serial=149035 16:55:41 Shutter LASER close 16:55:41 Received message from Camera: op=State serial=149037 16:55:41 GetSingleValue result=40 Value=cccccccc 16:55:41 SkyScan query 16:55:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:55:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:41 Parameters OK 16:55:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:41 Set A/D data flow result=40 16:55:41 Set A/D channel type result=40 16:55:41 Set A/D encoding result=40 16:55:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:41 Set channel filter=0.000000e+000 result=40 16:55:41 Config A/D Result=40 16:55:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:41 Get A/D filter: -9.255963e+061 result=40 16:55:41 Get A/D value=-858993460 result=40 16:55:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:41 Parameters OK 16:55:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:41 Set A/D data flow result=40 16:55:41 Set A/D channel type result=40 16:55:41 Set A/D encoding result=40 16:55:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:41 Set channel filter=0.000000e+000 result=40 16:55:41 Config A/D Result=40 16:55:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:41 Get A/D filter: -9.255963e+061 result=40 16:55:41 Get A/D value=-858993460 result=40 16:55:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:55:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:55:41 Aux= 16:55:41 Message to Camera, serial 149037 queued [UTC 2018-12-14 16:55:52] 16:56:18 Received message from Master: op=PointingHead serial=149050 16:56:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:56:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:56:19 Point started: ret=0 16:56:19 point_skyscan result=0 16:56:19 Check angles 16:56:19 SkyScan query 16:56:20 SkyScan query done: ret=0 az=153.06<-10204 ze=8.91<-11406 Statuses=0009 0009 16:56:20 Msec=0 True Az=153.06 Ze=8.91 Az status=0009 Ze status=0009 16:56:20 Check angles 16:56:20 SkyScan query 16:56:21 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.135<-12809 Statuses=0009 0009 16:56:21 Msec=750 True Az=135.705 Ze=-12.135 Az status=0009 Ze status=0009 16:56:21 Check angles 16:56:21 SkyScan query 16:56:21 SkyScan query done: ret=0 az=118.08<-7872 ze=-33.015<-14201 Statuses=0009 0009 16:56:21 Msec=1500 True Az=118.08 Ze=-33.015 Az status=0009 Ze status=0009 16:56:22 Check angles 16:56:22 SkyScan query 16:56:22 SkyScan query done: ret=0 az=100.71<-6714 ze=-51.525<-15435 Statuses=0009 0009 16:56:22 Msec=2250 True Az=100.71 Ze=-51.525 Az status=0009 Ze status=0009 16:56:22 Check angles 16:56:22 SkyScan query 16:56:23 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 16:56:23 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 16:56:23 Check angles 16:56:23 SkyScan query 16:56:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:56:24 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:56:24 Message to Master queued w/err=0: serial=149050 error=0 16:56:29 Received message from Master: op=Filter serial=149051 16:56:29 Color wheel filter change from 0 to 0 16:56:29 FLIGetFilterPos err=0 currentPosition=0 16:56:29 FLIGetStepsRemaining err=0 RemainingSteps=0 16:56:29 Filter is already there-color wheel unchanged 16:56:29 Received message from Master: op=Shutter serial=149052 16:56:29 Shutter LASER close 16:56:29 Received message from Camera: op=State serial=149054 16:56:29 GetSingleValue result=40 Value=cccccccc 16:56:29 SkyScan query 16:56:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:56:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:56:30 Parameters OK 16:56:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:56:30 Set A/D data flow result=40 16:56:30 Set A/D channel type result=40 16:56:30 Set A/D encoding result=40 16:56:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:56:30 Set channel filter=0.000000e+000 result=40 16:56:30 Config A/D Result=40 16:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:56:30 Get A/D filter: -9.255963e+061 result=40 16:56:30 Get A/D value=-858993460 result=40 16:56:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:56:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:56:30 Parameters OK 16:56:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:56:30 Set A/D data flow result=40 16:56:30 Set A/D channel type result=40 16:56:30 Set A/D encoding result=40 16:56:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:56:30 Set channel filter=0.000000e+000 result=40 16:56:30 Config A/D Result=40 16:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:56:30 Get A/D filter: -9.255963e+061 result=40 16:56:30 Get A/D value=-858993460 result=40 16:56:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:56:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:56:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:56:30 Aux= 16:56:30 Message to Camera, serial 149054 queued 16:57:06 Received message from Master: op=PointingHead serial=149067 16:57:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:57:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:57:07 Point started: ret=0 16:57:07 point_skyscan result=0 16:57:07 Check angles 16:57:07 SkyScan query 16:57:08 SkyScan query done: ret=0 az=108.795<-7253 ze=-80.97<-17398 Statuses=0009 0009 16:57:08 Msec=0 True Az=108.795 Ze=-80.97 Az status=0009 Ze status=0009 16:57:08 Check angles 16:57:08 SkyScan query 16:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.955<-18797 Statuses=0008 0009 16:57:09 Msec=750 True Az=112.995 Ze=-101.955 Az status=0008 Ze status=0009 16:57:09 Check angles 16:57:09 SkyScan query 16:57:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.865<-20191 Statuses=0008 0009 16:57:10 Msec=1500 True Az=112.995 Ze=-122.865 Az status=0008 Ze status=0009 16:57:10 Check angles 16:57:10 SkyScan query 16:57:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.865<-21591 Statuses=0008 0009 16:57:10 Msec=2250 True Az=112.995 Ze=-143.865 Az status=0008 Ze status=0009 16:57:10 Check angles 16:57:10 SkyScan query 16:57:11 SkyScan query done: ret=0 az=112.98<-7532 ze=-164.82<-22988 Statuses=0008 0009 16:57:11 Msec=3000 True Az=112.98 Ze=-164.82 Az status=0008 Ze status=0009 16:57:11 Check angles 16:57:11 SkyScan query 16:57:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:57:12 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:57:12 Message to Master queued w/err=0: serial=149067 error=0 16:57:17 Received message from Master: op=Filter serial=149068 16:57:17 Color wheel filter change from 0 to 0 16:57:17 FLIGetFilterPos err=0 currentPosition=0 16:57:17 FLIGetStepsRemaining err=0 RemainingSteps=0 16:57:17 Filter is already there-color wheel unchanged 16:57:17 Received message from Master: op=Shutter serial=149069 16:57:17 Shutter LASER open 16:57:17 Received message from Camera: op=State serial=149071 16:57:17 GetSingleValue result=40 Value=cccccccc 16:57:17 SkyScan query 16:57:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:57:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:18 Parameters OK 16:57:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:18 Set A/D data flow result=40 16:57:18 Set A/D channel type result=40 16:57:18 Set A/D encoding result=40 16:57:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:18 Set channel filter=0.000000e+000 result=40 16:57:18 Config A/D Result=40 16:57:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:18 Get A/D filter: -9.255963e+061 result=40 16:57:18 Get A/D value=-858993460 result=40 16:57:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:18 Parameters OK 16:57:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:18 Set A/D data flow result=40 16:57:18 Set A/D channel type result=40 16:57:18 Set A/D encoding result=40 16:57:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:18 Set channel filter=0.000000e+000 result=40 16:57:18 Config A/D Result=40 16:57:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:18 Get A/D filter: -9.255963e+061 result=40 16:57:18 Get A/D value=-858993460 result=40 16:57:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:57:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:57:18 Aux= 16:57:18 Message to Camera, serial 149071 queued 16:57:26 Received message from Master: op=Shutter serial=149081 16:57:26 Shutter LASER close 16:57:27 Received message from Master: op=PointingHead serial=149085 16:57:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:57:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:57:27 Point started: ret=0 16:57:27 point_skyscan result=0 16:57:28 Check angles 16:57:28 SkyScan query 16:57:28 SkyScan query done: ret=0 az=89.595<-5973 ze=156.93<-1538 Statuses=0009 0009 16:57:28 Msec=0 True Az=89.595 Ze=156.93 Az status=0009 Ze status=0009 16:57:28 Check angles 16:57:28 SkyScan query 16:57:29 SkyScan query done: ret=0 az=72.03<-4802 ze=135.99<-2934 Statuses=0009 0009 16:57:29 Msec=750 True Az=72.03 Ze=135.99 Az status=0009 Ze status=0009 16:57:29 Check angles 16:57:29 SkyScan query 16:57:30 SkyScan query done: ret=0 az=54.735<-3649 ze=115.02<-4332 Statuses=0009 0009 16:57:30 Msec=1500 True Az=54.735 Ze=115.02 Az status=0009 Ze status=0009 16:57:30 Check angles 16:57:30 SkyScan query 16:57:31 SkyScan query done: ret=0 az=41.025<-2735 ze=94.065<-5729 Statuses=0009 0009 16:57:31 Msec=2250 True Az=41.025 Ze=94.065 Az status=0009 Ze status=0009 16:57:31 Check angles 16:57:31 SkyScan query 16:57:31 SkyScan query done: ret=0 az=40.995<-2733 ze=73.08<-7128 Statuses=0008 0009 16:57:31 Msec=3000 True Az=40.995 Ze=73.08 Az status=0008 Ze status=0009 16:57:31 Check angles 16:57:31 SkyScan query 16:57:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.635<-8491 Statuses=0008 0009 16:57:32 Msec=3750 True Az=40.995 Ze=52.635 Az status=0008 Ze status=0009 16:57:32 Check angles 16:57:32 SkyScan query 16:57:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:57:33 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:57:33 Message to Master queued w/err=0: serial=149085 error=0 16:57:38 Received message from Master: op=Filter serial=149086 16:57:38 Color wheel filter change from 0 to 0 16:57:38 FLIGetFilterPos err=0 currentPosition=0 16:57:38 FLIGetStepsRemaining err=0 RemainingSteps=0 16:57:38 Filter is already there-color wheel unchanged 16:57:38 Received message from Master: op=Shutter serial=149087 16:57:38 Shutter LASER close 16:57:38 Received message from Camera: op=State serial=149089 16:57:38 GetSingleValue result=40 Value=cccccccc 16:57:38 SkyScan query 16:57:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:57:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:39 Parameters OK 16:57:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:39 Set A/D data flow result=40 16:57:39 Set A/D channel type result=40 16:57:39 Set A/D encoding result=40 16:57:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:39 Set channel filter=0.000000e+000 result=40 16:57:39 Config A/D Result=40 16:57:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:39 Get A/D filter: -9.255963e+061 result=40 16:57:39 Get A/D value=-858993460 result=40 16:57:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:39 Parameters OK 16:57:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:39 Set A/D data flow result=40 16:57:39 Set A/D channel type result=40 16:57:39 Set A/D encoding result=40 16:57:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:39 Set channel filter=0.000000e+000 result=40 16:57:39 Config A/D Result=40 16:57:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:39 Get A/D filter: -9.255963e+061 result=40 16:57:39 Get A/D value=-858993460 result=40 16:57:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:57:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:57:39 Aux= 16:57:39 Message to Camera, serial 149089 queued 16:58:16 Received message from Master: op=PointingHead serial=149102 16:58:16 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:58:16 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:58:16 Point started: ret=0 16:58:16 point_skyscan result=0 16:58:17 Check angles 16:58:17 SkyScan query 16:58:17 SkyScan query done: ret=0 az=64.035<-4269 ze=66.54<-7564 Statuses=0009 0008 16:58:17 Msec=0 True Az=64.035 Ze=66.54 Az status=0009 Ze status=0008 16:58:17 Check angles 16:58:17 SkyScan query 16:58:18 SkyScan query done: ret=0 az=82.005<-5467 ze=66.51<-7566 Statuses=0009 0008 16:58:18 Msec=750 True Az=82.005 Ze=66.51 Az status=0009 Ze status=0008 16:58:18 Check angles 16:58:18 SkyScan query 16:58:19 SkyScan query done: ret=0 az=99.66<-6644 ze=66.495<-7567 Statuses=0009 0008 16:58:19 Msec=1500 True Az=99.66 Ze=66.495 Az status=0009 Ze status=0008 16:58:19 Check angles 16:58:19 SkyScan query 16:58:19 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 16:58:19 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 16:58:20 Check angles 16:58:20 SkyScan query 16:58:20 SkyScan query done: ret=0 az=135.09<-9006 ze=66.495<-7567 Statuses=0009 0008 16:58:20 Msec=3000 True Az=135.09 Ze=66.495 Az status=0009 Ze status=0008 16:58:20 Check angles 16:58:20 SkyScan query 16:58:21 SkyScan query done: ret=0 az=152.805<-10187 ze=66.495<-7567 Statuses=0009 0008 16:58:21 Msec=3750 True Az=152.805 Ze=66.495 Az status=0009 Ze status=0008 16:58:21 Check angles 16:58:21 SkyScan query 16:58:22 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 16:58:22 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 16:58:22 Message to Master queued w/err=0: serial=149102 error=0 16:58:27 Received message from Master: op=Filter serial=149103 16:58:27 Color wheel filter change from 0 to 0 16:58:27 FLIGetFilterPos err=0 currentPosition=0 16:58:27 FLIGetStepsRemaining err=0 RemainingSteps=0 16:58:27 Filter is already there-color wheel unchanged 16:58:27 Received message from Master: op=Shutter serial=149104 16:58:27 Shutter LASER close 16:58:27 Received message from Camera: op=State serial=149106 16:58:27 GetSingleValue result=40 Value=cccccccc 16:58:27 SkyScan query 16:58:28 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:58:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:28 Parameters OK 16:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:28 Set A/D data flow result=40 16:58:28 Set A/D channel type result=40 16:58:28 Set A/D encoding result=40 16:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:28 Set channel filter=0.000000e+000 result=40 16:58:28 Config A/D Result=40 16:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:28 Get A/D filter: -9.255963e+061 result=40 16:58:28 Get A/D value=-858993460 result=40 16:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:28 Parameters OK 16:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:28 Set A/D data flow result=40 16:58:28 Set A/D channel type result=40 16:58:28 Set A/D encoding result=40 16:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:28 Set channel filter=0.000000e+000 result=40 16:58:28 Config A/D Result=40 16:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:28 Get A/D filter: -9.255963e+061 result=40 16:58:28 Get A/D value=-858993460 result=40 16:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:28 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:58:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:58:28 Aux= 16:58:28 Message to Camera, serial 149106 queued 16:59:04 Received message from Master: op=PointingHead serial=149119 16:59:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:59:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:59:05 Point started: ret=0 16:59:05 point_skyscan result=0 16:59:06 Check angles 16:59:06 SkyScan query 16:59:06 SkyScan query done: ret=0 az=135.075<-9005 ze=36.795<-9547 Statuses=0009 0009 16:59:06 Msec=0 True Az=135.075 Ze=36.795 Az status=0009 Ze status=0009 16:59:06 Check angles 16:59:06 SkyScan query 16:59:07 SkyScan query done: ret=0 az=117.09<-7806 ze=15.465<-10969 Statuses=0009 0009 16:59:07 Msec=750 True Az=117.09 Ze=15.465 Az status=0009 Ze status=0009 16:59:07 Check angles 16:59:07 SkyScan query 16:59:08 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.565<-12371 Statuses=0009 0009 16:59:08 Msec=1500 True Az=99.84 Ze=-5.565 Az status=0009 Ze status=0009 16:59:08 Check angles 16:59:08 SkyScan query 16:59:08 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.535<-13769 Statuses=0009 0009 16:59:08 Msec=2250 True Az=82.215 Ze=-26.535 Az status=0009 Ze status=0009 16:59:09 Check angles 16:59:09 SkyScan query 16:59:09 SkyScan query done: ret=0 az=64.425<-4295 ze=-38.595<-14573 Statuses=0009 0008 16:59:09 Msec=3000 True Az=64.425 Ze=-38.595 Az status=0009 Ze status=0008 16:59:09 Check angles 16:59:09 SkyScan query 16:59:10 SkyScan query done: ret=0 az=46.995<-3133 ze=-38.52<-14568 Statuses=0009 0008 16:59:10 Msec=3750 True Az=46.995 Ze=-38.52 Az status=0009 Ze status=0008 16:59:10 Check angles 16:59:10 SkyScan query 16:59:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:59:11 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:59:11 Message to Master queued w/err=0: serial=149119 error=0 16:59:16 Received message from Master: op=Filter serial=149120 16:59:16 Color wheel filter change from 0 to 0 16:59:16 FLIGetFilterPos err=0 currentPosition=0 16:59:16 FLIGetStepsRemaining err=0 RemainingSteps=0 16:59:16 Filter is already there-color wheel unchanged 16:59:16 Received message from Master: op=Shutter serial=149121 16:59:16 Shutter LASER close 16:59:16 Received message from Camera: op=State serial=149123 16:59:16 GetSingleValue result=40 Value=cccccccc 16:59:16 SkyScan query 16:59:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:59:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:16 Parameters OK 16:59:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:16 Set A/D data flow result=40 16:59:16 Set A/D channel type result=40 16:59:16 Set A/D encoding result=40 16:59:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:16 Set channel filter=0.000000e+000 result=40 16:59:16 Config A/D Result=40 16:59:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:16 Get A/D filter: -9.255963e+061 result=40 16:59:16 Get A/D value=-858993460 result=40 16:59:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:16 Parameters OK 16:59:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:16 Set A/D data flow result=40 16:59:16 Set A/D channel type result=40 16:59:16 Set A/D encoding result=40 16:59:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:16 Set channel filter=0.000000e+000 result=40 16:59:16 Config A/D Result=40 16:59:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:16 Get A/D filter: -9.255963e+061 result=40 16:59:16 Get A/D value=-858993460 result=40 16:59:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:59:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:59:16 Aux= 16:59:16 Message to Camera, serial 149123 queued 16:59:52 Received message from Master: op=PointingHead serial=149135 16:59:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:59:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:59:53 Point started: ret=0 16:59:53 point_skyscan result=0 16:59:53 Check angles 16:59:53 SkyScan query 16:59:54 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.145<-16543 Statuses=0009 0009 16:59:54 Msec=0 True Az=63.78 Ze=-68.145 Az status=0009 Ze status=0009 16:59:54 Check angles 16:59:54 SkyScan query 16:59:55 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.13<-17942 Statuses=0009 0009 16:59:55 Msec=750 True Az=81.315 Ze=-89.13 Az status=0009 Ze status=0009 16:59:55 Check angles 16:59:55 SkyScan query 16:59:56 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.52<-19368 Statuses=0009 0009 16:59:56 Msec=1500 True Az=99.195 Ze=-110.52 Az status=0009 Ze status=0009 16:59:56 Check angles 16:59:56 SkyScan query 16:59:56 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.43<-20762 Statuses=0009 0009 16:59:56 Msec=2250 True Az=116.625 Ze=-131.43 Az status=0009 Ze status=0009 16:59:57 Check angles 16:59:57 SkyScan query 16:59:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 16:59:57 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 16:59:57 Check angles 16:59:57 SkyScan query 16:59:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 16:59:58 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 16:59:58 Message to Master queued w/err=0: serial=149135 error=0 17:00:03 Received message from Master: op=Filter serial=149136 17:00:03 Color wheel filter change from 0 to 0 17:00:03 FLIGetFilterPos err=0 currentPosition=0 17:00:03 FLIGetStepsRemaining err=0 RemainingSteps=0 17:00:03 Filter is already there-color wheel unchanged 17:00:03 Received message from Master: op=Shutter serial=149137 17:00:03 Shutter LASER close 17:00:03 Received message from Camera: op=State serial=149139 17:00:03 GetSingleValue result=40 Value=cccccccc 17:00:03 SkyScan query 17:00:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:00:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:04 Parameters OK 17:00:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:04 Set A/D data flow result=40 17:00:04 Set A/D channel type result=40 17:00:04 Set A/D encoding result=40 17:00:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:04 Set channel filter=0.000000e+000 result=40 17:00:04 Config A/D Result=40 17:00:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:04 Get A/D filter: -9.255963e+061 result=40 17:00:04 Get A/D value=-858993460 result=40 17:00:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:04 Parameters OK 17:00:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:04 Set A/D data flow result=40 17:00:04 Set A/D channel type result=40 17:00:04 Set A/D encoding result=40 17:00:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:04 Set channel filter=0.000000e+000 result=40 17:00:04 Config A/D Result=40 17:00:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:04 Get A/D filter: -9.255963e+061 result=40 17:00:04 Get A/D value=-858993460 result=40 17:00:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:00:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:00:04 Aux= 17:00:04 Message to Camera, serial 149139 queued 17:00:40 Received message from Master: op=PointingHead serial=149152 17:00:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:00:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:00:41 Point started: ret=0 17:00:41 point_skyscan result=0 17:00:42 Check angles 17:00:42 SkyScan query 17:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 17:00:42 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 17:00:42 Check angles 17:00:42 SkyScan query 17:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:00:43 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:00:43 Message to Master queued w/err=0: serial=149152 error=0 17:00:48 Received message from Master: op=Filter serial=149153 17:00:48 Color wheel filter change from 0 to 0 17:00:48 FLIGetFilterPos err=0 currentPosition=0 17:00:48 FLIGetStepsRemaining err=0 RemainingSteps=0 17:00:48 Filter is already there-color wheel unchanged 17:00:48 Received message from Master: op=Shutter serial=149154 17:00:48 Shutter LASER open 17:00:48 Received message from Camera: op=State serial=149156 17:00:48 GetSingleValue result=40 Value=cccccccc 17:00:48 SkyScan query 17:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:00:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:49 Parameters OK 17:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:49 Set A/D data flow result=40 17:00:49 Set A/D channel type result=40 17:00:49 Set A/D encoding result=40 17:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:49 Set channel filter=0.000000e+000 result=40 17:00:49 Config A/D Result=40 17:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:49 Get A/D filter: -9.255963e+061 result=40 17:00:49 Get A/D value=-858993460 result=40 17:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:49 Parameters OK 17:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:49 Set A/D data flow result=40 17:00:49 Set A/D channel type result=40 17:00:49 Set A/D encoding result=40 17:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:49 Set channel filter=0.000000e+000 result=40 17:00:49 Config A/D Result=40 17:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:49 Get A/D filter: -9.255963e+061 result=40 17:00:49 Get A/D value=-858993460 result=40 17:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:00:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:00:49 Aux= 17:00:49 Message to Camera, serial 149156 queued 17:00:57 Received message from Master: op=Shutter serial=149166 17:00:57 Shutter LASER close 17:00:58 Received message from Master: op=PointingHead serial=149170 17:00:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:00:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:00:58 Point started: ret=0 17:00:58 point_skyscan result=0 17:00:59 Check angles 17:00:59 SkyScan query 17:01:00 SkyScan query done: ret=0 az=135.795<-9053 ze=-143.505<-21567 Statuses=0009 0009 17:01:00 Msec=0 True Az=135.795 Ze=-143.505 Az status=0009 Ze status=0009 17:01:00 Check angles 17:01:00 SkyScan query 17:01:00 SkyScan query done: ret=0 az=153.315<-10221 ze=-122.52<-20168 Statuses=0009 0009 17:01:00 Msec=750 True Az=153.315 Ze=-122.52 Az status=0009 Ze status=0009 17:01:00 Check angles 17:01:00 SkyScan query 17:01:01 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.685<-18779 Statuses=0009 0009 17:01:01 Msec=1500 True Az=170.79 Ze=-101.685 Az status=0009 Ze status=0009 17:01:01 Check angles 17:01:01 SkyScan query 17:01:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.25<-17350 Statuses=0008 0009 17:01:02 Msec=2250 True Az=176.01 Ze=-80.25 Az status=0008 Ze status=0009 17:01:02 Check angles 17:01:02 SkyScan query 17:01:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.755<-15917 Statuses=0008 0009 17:01:03 Msec=3000 True Az=176.01 Ze=-58.755 Az status=0008 Ze status=0009 17:01:03 Check angles 17:01:03 SkyScan query 17:01:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:01:03 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:01:03 Message to Master queued w/err=0: serial=149170 error=0 17:01:08 Received message from Master: op=Filter serial=149171 17:01:08 Color wheel filter change from 0 to 0 17:01:08 FLIGetFilterPos err=0 currentPosition=0 17:01:08 FLIGetStepsRemaining err=0 RemainingSteps=0 17:01:08 Filter is already there-color wheel unchanged 17:01:08 Received message from Master: op=Shutter serial=149172 17:01:08 Shutter LASER close 17:01:09 Received message from Camera: op=State serial=149174 17:01:09 GetSingleValue result=40 Value=cccccccc 17:01:09 SkyScan query 17:01:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:01:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:09 Parameters OK 17:01:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:09 Set A/D data flow result=40 17:01:09 Set A/D channel type result=40 17:01:09 Set A/D encoding result=40 17:01:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:09 Set channel filter=0.000000e+000 result=40 17:01:09 Config A/D Result=40 17:01:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:09 Get A/D filter: -9.255963e+061 result=40 17:01:09 Get A/D value=-858993460 result=40 17:01:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:09 Parameters OK 17:01:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:09 Set A/D data flow result=40 17:01:09 Set A/D channel type result=40 17:01:09 Set A/D encoding result=40 17:01:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:09 Set channel filter=0.000000e+000 result=40 17:01:09 Config A/D Result=40 17:01:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:09 Get A/D filter: -9.255963e+061 result=40 17:01:09 Get A/D value=-858993460 result=40 17:01:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:01:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:01:09 Aux= 17:01:09 Message to Camera, serial 149174 queued 17:01:46 Received message from Master: op=PointingHead serial=149187 17:01:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:01:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:01:46 Point started: ret=0 17:01:46 point_skyscan result=0 17:01:47 Check angles 17:01:47 SkyScan query 17:01:48 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.795<-13453 Statuses=0009 0009 17:01:48 Msec=0 True Az=152.955 Ze=-21.795 Az status=0009 Ze status=0009 17:01:48 Check angles 17:01:48 SkyScan query 17:01:48 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.81<-12054 Statuses=0009 0009 17:01:48 Msec=750 True Az=135.585 Ze=-0.81 Az status=0009 Ze status=0009 17:01:49 Check angles 17:01:49 SkyScan query 17:01:49 SkyScan query done: ret=0 az=118.02<-7868 ze=20.13<-10658 Statuses=0009 0009 17:01:49 Msec=1500 True Az=118.02 Ze=20.13 Az status=0009 Ze status=0009 17:01:49 Check angles 17:01:49 SkyScan query 17:01:50 SkyScan query done: ret=0 az=100.65<-6710 ze=41.115<-9259 Statuses=0009 0009 17:01:50 Msec=2250 True Az=100.65 Ze=41.115 Az status=0009 Ze status=0009 17:01:50 Check angles 17:01:50 SkyScan query 17:01:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 17:01:51 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 17:01:51 Check angles 17:01:51 SkyScan query 17:01:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:01:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:01:51 Message to Master queued w/err=0: serial=149187 error=0 17:01:56 Received message from Master: op=Filter serial=149188 17:01:56 Color wheel filter change from 0 to 0 17:01:56 FLIGetFilterPos err=0 currentPosition=0 17:01:56 FLIGetStepsRemaining err=0 RemainingSteps=0 17:01:56 Filter is already there-color wheel unchanged 17:01:57 Received message from Master: op=Shutter serial=149189 17:01:57 Shutter LASER close 17:01:57 Received message from Camera: op=State serial=149191 17:01:57 GetSingleValue result=40 Value=cccccccc 17:01:57 SkyScan query 17:01:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:01:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:57 Parameters OK 17:01:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:57 Set A/D data flow result=40 17:01:57 Set A/D channel type result=40 17:01:57 Set A/D encoding result=40 17:01:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:57 Set channel filter=0.000000e+000 result=40 17:01:57 Config A/D Result=40 17:01:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:57 Get A/D filter: -9.255963e+061 result=40 17:01:57 Get A/D value=-858993460 result=40 17:01:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:57 Parameters OK 17:01:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:57 Set A/D data flow result=40 17:01:57 Set A/D channel type result=40 17:01:57 Set A/D encoding result=40 17:01:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:57 Set channel filter=0.000000e+000 result=40 17:01:57 Config A/D Result=40 17:01:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:57 Get A/D filter: -9.255963e+061 result=40 17:01:57 Get A/D value=-858993460 result=40 17:01:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:01:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:01:57 Aux= 17:01:57 Message to Camera, serial 149191 queued 17:02:34 Received message from Master: op=PointingHead serial=149204 17:02:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:02:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:02:34 Point started: ret=0 17:02:34 point_skyscan result=0 17:02:35 Check angles 17:02:35 SkyScan query 17:02:36 SkyScan query done: ret=0 az=108.87<-7258 ze=38.475<-9435 Statuses=0009 0008 17:02:36 Msec=0 True Az=108.87 Ze=38.475 Az status=0009 Ze status=0008 17:02:36 Check angles 17:02:36 SkyScan query 17:02:37 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 17:02:37 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 17:02:37 Check angles 17:02:37 SkyScan query 17:02:37 SkyScan query done: ret=0 az=143.91<-9594 ze=38.505<-9433 Statuses=0009 0008 17:02:37 Msec=1500 True Az=143.91 Ze=38.505 Az status=0009 Ze status=0008 17:02:37 Check angles 17:02:37 SkyScan query 17:02:38 SkyScan query done: ret=0 az=161.265<-10751 ze=38.505<-9433 Statuses=0009 0008 17:02:38 Msec=2250 True Az=161.265 Ze=38.505 Az status=0009 Ze status=0008 17:02:38 Check angles 17:02:38 SkyScan query 17:02:39 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:02:39 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:02:39 Check angles 17:02:39 SkyScan query 17:02:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:02:40 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:02:40 Message to Master queued w/err=0: serial=149204 error=0 17:02:45 Received message from Master: op=Filter serial=149205 17:02:45 Color wheel filter change from 0 to 0 17:02:45 FLIGetFilterPos err=0 currentPosition=0 17:02:45 FLIGetStepsRemaining err=0 RemainingSteps=0 17:02:45 Filter is already there-color wheel unchanged 17:02:45 Received message from Master: op=Shutter serial=149206 17:02:45 Shutter LASER close 17:02:45 Received message from Camera: op=State serial=149208 17:02:45 GetSingleValue result=40 Value=cccccccc 17:02:45 SkyScan query 17:02:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:02:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:45 Parameters OK 17:02:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:45 Set A/D data flow result=40 17:02:45 Set A/D channel type result=40 17:02:45 Set A/D encoding result=40 17:02:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:45 Set channel filter=0.000000e+000 result=40 17:02:45 Config A/D Result=40 17:02:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:45 Get A/D filter: -9.255963e+061 result=40 17:02:45 Get A/D value=-858993460 result=40 17:02:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:45 Parameters OK 17:02:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:45 Set A/D data flow result=40 17:02:45 Set A/D channel type result=40 17:02:45 Set A/D encoding result=40 17:02:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:45 Set channel filter=0.000000e+000 result=40 17:02:45 Config A/D Result=40 17:02:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:45 Get A/D filter: -9.255963e+061 result=40 17:02:45 Get A/D value=-858993460 result=40 17:02:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:02:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:02:45 Aux= 17:02:45 Message to Camera, serial 149208 queued 17:03:22 Received message from Master: op=PointingHead serial=149221 17:03:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:03:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:03:23 Point started: ret=0 17:03:23 point_skyscan result=0 17:03:23 Check angles 17:03:23 SkyScan query 17:03:24 SkyScan query done: ret=0 az=152.94<-10196 ze=8.625<-11425 Statuses=0009 0009 17:03:24 Msec=0 True Az=152.94 Ze=8.625 Az status=0009 Ze status=0009 17:03:24 Check angles 17:03:24 SkyScan query 17:03:25 SkyScan query done: ret=0 az=135.09<-9006 ze=-12.75<-12850 Statuses=0009 0009 17:03:25 Msec=750 True Az=135.09 Ze=-12.75 Az status=0009 Ze status=0009 17:03:25 Check angles 17:03:25 SkyScan query 17:03:25 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.78<-14252 Statuses=0009 0009 17:03:25 Msec=1500 True Az=117.57 Ze=-33.78 Az status=0009 Ze status=0009 17:03:26 Check angles 17:03:26 SkyScan query 17:03:26 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.585<-15439 Statuses=0009 0009 17:03:26 Msec=2250 True Az=100.185 Ze=-51.585 Az status=0009 Ze status=0009 17:03:26 Check angles 17:03:26 SkyScan query 17:03:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 17:03:27 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 17:03:27 Check angles 17:03:27 SkyScan query 17:03:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:03:28 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:03:28 Message to Master queued w/err=0: serial=149221 error=0 17:03:33 Received message from Master: op=Filter serial=149222 17:03:33 Color wheel filter change from 0 to 0 17:03:33 FLIGetFilterPos err=0 currentPosition=0 17:03:33 FLIGetStepsRemaining err=0 RemainingSteps=0 17:03:33 Filter is already there-color wheel unchanged 17:03:33 Received message from Master: op=Shutter serial=149223 17:03:33 Shutter LASER close 17:03:33 Received message from Camera: op=State serial=149225 17:03:33 GetSingleValue result=40 Value=cccccccc 17:03:33 SkyScan query 17:03:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:03:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:03:33 Parameters OK 17:03:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:03:33 Set A/D data flow result=40 17:03:33 Set A/D channel type result=40 17:03:33 Set A/D encoding result=40 17:03:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:03:33 Set channel filter=0.000000e+000 result=40 17:03:33 Config A/D Result=40 17:03:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:03:33 Get A/D filter: -9.255963e+061 result=40 17:03:33 Get A/D value=-858993460 result=40 17:03:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:03:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:03:33 Parameters OK 17:03:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:03:33 Set A/D data flow result=40 17:03:33 Set A/D channel type result=40 17:03:33 Set A/D encoding result=40 17:03:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:03:33 Set channel filter=0.000000e+000 result=40 17:03:33 Config A/D Result=40 17:03:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:03:33 Get A/D filter: -9.255963e+061 result=40 17:03:33 Get A/D value=-858993460 result=40 17:03:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:03:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:03:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:03:33 Aux= 17:03:33 Message to Camera, serial 149225 queued 17:04:10 Received message from Master: op=PointingHead serial=149238 17:04:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:04:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:04:11 Point started: ret=0 17:04:11 point_skyscan result=0 17:04:11 Check angles 17:04:11 SkyScan query 17:04:12 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.045<-17403 Statuses=0009 0009 17:04:12 Msec=0 True Az=108.87 Ze=-81.045 Az status=0009 Ze status=0009 17:04:12 Check angles 17:04:12 SkyScan query 17:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 17:04:13 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 17:04:13 Check angles 17:04:13 SkyScan query 17:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.955<-20197 Statuses=0008 0009 17:04:13 Msec=1500 True Az=112.995 Ze=-122.955 Az status=0008 Ze status=0009 17:04:14 Check angles 17:04:14 SkyScan query 17:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 17:04:14 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 17:04:14 Check angles 17:04:14 SkyScan query 17:04:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.315<-23021 Statuses=0008 0009 17:04:15 Msec=3000 True Az=112.995 Ze=-165.315 Az status=0008 Ze status=0009 17:04:15 Check angles 17:04:15 SkyScan query 17:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:04:16 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:04:16 Message to Master queued w/err=0: serial=149238 error=0 17:04:21 Received message from Master: op=Filter serial=149239 17:04:21 Color wheel filter change from 0 to 0 17:04:21 FLIGetFilterPos err=0 currentPosition=0 17:04:21 FLIGetStepsRemaining err=0 RemainingSteps=0 17:04:21 Filter is already there-color wheel unchanged 17:04:21 Received message from Master: op=Shutter serial=149240 17:04:21 Shutter LASER open 17:04:21 Received message from Camera: op=State serial=149242 17:04:21 GetSingleValue result=40 Value=cccccccc 17:04:21 SkyScan query 17:04:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:04:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:22 Parameters OK 17:04:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:22 Set A/D data flow result=40 17:04:22 Set A/D channel type result=40 17:04:22 Set A/D encoding result=40 17:04:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:22 Set channel filter=0.000000e+000 result=40 17:04:22 Config A/D Result=40 17:04:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:22 Get A/D filter: -9.255963e+061 result=40 17:04:22 Get A/D value=-858993460 result=40 17:04:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:22 Parameters OK 17:04:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:22 Set A/D data flow result=40 17:04:22 Set A/D channel type result=40 17:04:22 Set A/D encoding result=40 17:04:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:22 Set channel filter=0.000000e+000 result=40 17:04:22 Config A/D Result=40 17:04:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:22 Get A/D filter: -9.255963e+061 result=40 17:04:22 Get A/D value=-858993460 result=40 17:04:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:04:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:04:22 Aux= 17:04:22 Message to Camera, serial 149242 queued 17:04:30 Received message from Master: op=Shutter serial=149252 17:04:30 Shutter LASER close 17:04:31 Received message from Master: op=PointingHead serial=149256 17:04:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:04:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:04:31 Point started: ret=0 17:04:31 point_skyscan result=0 17:04:32 Check angles 17:04:32 SkyScan query 17:04:32 SkyScan query done: ret=0 az=89.805<-5987 ze=157.215<-1519 Statuses=0009 0009 17:04:32 Msec=0 True Az=89.805 Ze=157.215 Az status=0009 Ze status=0009 17:04:32 Check angles 17:04:32 SkyScan query 17:04:33 SkyScan query done: ret=0 az=72.225<-4815 ze=136.245<-2917 Statuses=0009 0009 17:04:33 Msec=750 True Az=72.225 Ze=136.245 Az status=0009 Ze status=0009 17:04:33 Check angles 17:04:33 SkyScan query 17:04:34 SkyScan query done: ret=0 az=55.02<-3668 ze=115.32<-4312 Statuses=0009 0009 17:04:34 Msec=1500 True Az=55.02 Ze=115.32 Az status=0009 Ze status=0009 17:04:34 Check angles 17:04:34 SkyScan query 17:04:34 SkyScan query done: ret=0 az=41.01<-2734 ze=94.335<-5711 Statuses=0009 0009 17:04:34 Msec=2250 True Az=41.01 Ze=94.335 Az status=0009 Ze status=0009 17:04:35 Check angles 17:04:35 SkyScan query 17:04:35 SkyScan query done: ret=0 az=40.995<-2733 ze=73.35<-7110 Statuses=0008 0009 17:04:35 Msec=3000 True Az=40.995 Ze=73.35 Az status=0008 Ze status=0009 17:04:35 Check angles 17:04:35 SkyScan query 17:04:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.83<-8478 Statuses=0008 0009 17:04:36 Msec=3750 True Az=40.995 Ze=52.83 Az status=0008 Ze status=0009 17:04:36 Check angles 17:04:36 SkyScan query 17:04:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:04:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:04:37 Message to Master queued w/err=0: serial=149256 error=0 17:04:42 Received message from Master: op=Filter serial=149257 17:04:42 Color wheel filter change from 0 to 0 17:04:42 FLIGetFilterPos err=0 currentPosition=0 17:04:42 FLIGetStepsRemaining err=0 RemainingSteps=0 17:04:42 Filter is already there-color wheel unchanged 17:04:42 Received message from Master: op=Shutter serial=149258 17:04:42 Shutter LASER close 17:04:42 Received message from Camera: op=State serial=149260 17:04:42 GetSingleValue result=40 Value=cccccccc 17:04:42 SkyScan query 17:04:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:04:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:43 Parameters OK 17:04:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:43 Set A/D data flow result=40 17:04:43 Set A/D channel type result=40 17:04:43 Set A/D encoding result=40 17:04:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:43 Set channel filter=0.000000e+000 result=40 17:04:43 Config A/D Result=40 17:04:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:43 Get A/D filter: -9.255963e+061 result=40 17:04:43 Get A/D value=-858993460 result=40 17:04:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:43 Parameters OK 17:04:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:43 Set A/D data flow result=40 17:04:43 Set A/D channel type result=40 17:04:43 Set A/D encoding result=40 17:04:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:43 Set channel filter=0.000000e+000 result=40 17:04:43 Config A/D Result=40 17:04:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:43 Get A/D filter: -9.255963e+061 result=40 17:04:43 Get A/D value=-858993460 result=40 17:04:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:04:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:04:43 Aux= 17:04:43 Message to Camera, serial 149260 queued 17:05:19 Received message from Master: op=PointingHead serial=149273 17:05:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:05:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:05:20 Point started: ret=0 17:05:20 point_skyscan result=0 17:05:21 Check angles 17:05:21 SkyScan query 17:05:21 SkyScan query done: ret=0 az=64.35<-4290 ze=66.54<-7564 Statuses=0009 0008 17:05:21 Msec=0 True Az=64.35 Ze=66.54 Az status=0009 Ze status=0008 17:05:21 Check angles 17:05:21 SkyScan query 17:05:22 SkyScan query done: ret=0 az=82.26<-5484 ze=66.51<-7566 Statuses=0009 0008 17:05:22 Msec=750 True Az=82.26 Ze=66.51 Az status=0009 Ze status=0008 17:05:22 Check angles 17:05:22 SkyScan query 17:05:23 SkyScan query done: ret=0 az=99.765<-6651 ze=66.495<-7567 Statuses=0009 0008 17:05:23 Msec=1500 True Az=99.765 Ze=66.495 Az status=0009 Ze status=0008 17:05:23 Check angles 17:05:23 SkyScan query 17:05:23 SkyScan query done: ret=0 az=117.105<-7807 ze=66.495<-7567 Statuses=0009 0008 17:05:23 Msec=2250 True Az=117.105 Ze=66.495 Az status=0009 Ze status=0008 17:05:24 Check angles 17:05:24 SkyScan query 17:05:24 SkyScan query done: ret=0 az=134.58<-8972 ze=66.495<-7567 Statuses=0009 0008 17:05:24 Msec=3000 True Az=134.58 Ze=66.495 Az status=0009 Ze status=0008 17:05:24 Check angles 17:05:24 SkyScan query 17:05:25 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 17:05:25 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 17:05:25 Check angles 17:05:25 SkyScan query 17:05:26 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:05:26 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:05:26 Message to Master queued w/err=0: serial=149273 error=0 17:05:31 Received message from Master: op=Filter serial=149274 17:05:31 Color wheel filter change from 0 to 0 17:05:31 FLIGetFilterPos err=0 currentPosition=0 17:05:31 FLIGetStepsRemaining err=0 RemainingSteps=0 17:05:31 Filter is already there-color wheel unchanged 17:05:31 Received message from Master: op=Shutter serial=149275 17:05:31 Shutter LASER close 17:05:31 Received message from Camera: op=State serial=149277 17:05:31 GetSingleValue result=40 Value=cccccccc 17:05:31 SkyScan query 17:05:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:05:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:31 Parameters OK 17:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:31 Set A/D data flow result=40 17:05:31 Set A/D channel type result=40 17:05:31 Set A/D encoding result=40 17:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:31 Set channel filter=0.000000e+000 result=40 17:05:31 Config A/D Result=40 17:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:31 Get A/D filter: -9.255963e+061 result=40 17:05:31 Get A/D value=-858993460 result=40 17:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:31 Parameters OK 17:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:31 Set A/D data flow result=40 17:05:31 Set A/D channel type result=40 17:05:31 Set A/D encoding result=40 17:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:31 Set channel filter=0.000000e+000 result=40 17:05:31 Config A/D Result=40 17:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:31 Get A/D filter: -9.255963e+061 result=40 17:05:31 Get A/D value=-858993460 result=40 [UTC 2018-12-14 17:05:31] 17:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:05:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:05:32 Aux= 17:05:32 Message to Camera, serial 149277 queued 17:06:08 Received message from Master: op=PointingHead serial=149290 17:06:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:06:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:06:09 Point started: ret=0 17:06:09 point_skyscan result=0 17:06:09 Check angles 17:06:09 SkyScan query 17:06:10 SkyScan query done: ret=0 az=135.015<-9001 ze=36.855<-9543 Statuses=0009 0009 17:06:10 Msec=0 True Az=135.015 Ze=36.855 Az status=0009 Ze status=0009 17:06:10 Check angles 17:06:10 SkyScan query 17:06:11 SkyScan query done: ret=0 az=117.51<-7834 ze=15.915<-10939 Statuses=0009 0009 17:06:11 Msec=750 True Az=117.51 Ze=15.915 Az status=0009 Ze status=0009 17:06:11 Check angles 17:06:11 SkyScan query 17:06:11 SkyScan query done: ret=0 az=100.125<-6675 ze=-5.025<-12335 Statuses=0009 0009 17:06:11 Msec=1500 True Az=100.125 Ze=-5.025 Az status=0009 Ze status=0009 17:06:12 Check angles 17:06:12 SkyScan query 17:06:12 SkyScan query done: ret=0 az=82.59<-5506 ze=-25.98<-13732 Statuses=0009 0009 17:06:12 Msec=2250 True Az=82.59 Ze=-25.98 Az status=0009 Ze status=0009 17:06:12 Check angles 17:06:12 SkyScan query 17:06:13 SkyScan query done: ret=0 az=65.1<-4340 ze=-38.595<-14573 Statuses=0009 0008 17:06:13 Msec=3000 True Az=65.1 Ze=-38.595 Az status=0009 Ze status=0008 17:06:13 Check angles 17:06:13 SkyScan query 17:06:14 SkyScan query done: ret=0 az=47.31<-3154 ze=-38.52<-14568 Statuses=0009 0008 17:06:14 Msec=3750 True Az=47.31 Ze=-38.52 Az status=0009 Ze status=0008 17:06:14 Check angles 17:06:14 SkyScan query 17:06:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:06:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:06:14 Message to Master queued w/err=0: serial=149290 error=0 17:06:19 Received message from Master: op=Filter serial=149291 17:06:19 Color wheel filter change from 0 to 0 17:06:19 FLIGetFilterPos err=0 currentPosition=0 17:06:19 FLIGetStepsRemaining err=0 RemainingSteps=0 17:06:19 Filter is already there-color wheel unchanged 17:06:20 Received message from Master: op=Shutter serial=149292 17:06:20 Shutter LASER close 17:06:20 Received message from Camera: op=State serial=149294 17:06:20 GetSingleValue result=40 Value=cccccccc 17:06:20 SkyScan query 17:06:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:06:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:20 Parameters OK 17:06:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:20 Set A/D data flow result=40 17:06:20 Set A/D channel type result=40 17:06:20 Set A/D encoding result=40 17:06:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:20 Set channel filter=0.000000e+000 result=40 17:06:20 Config A/D Result=40 17:06:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:20 Get A/D filter: -9.255963e+061 result=40 17:06:20 Get A/D value=-858993460 result=40 17:06:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:20 Parameters OK 17:06:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:20 Set A/D data flow result=40 17:06:20 Set A/D channel type result=40 17:06:20 Set A/D encoding result=40 17:06:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:20 Set channel filter=0.000000e+000 result=40 17:06:20 Config A/D Result=40 17:06:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:20 Get A/D filter: -9.255963e+061 result=40 17:06:20 Get A/D value=-858993460 result=40 17:06:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:06:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:06:20 Aux= 17:06:20 Message to Camera, serial 149294 queued 17:06:57 Received message from Master: op=PointingHead serial=149307 17:06:57 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:06:57 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:06:57 Point started: ret=0 17:06:57 point_skyscan result=0 17:06:58 Check angles 17:06:58 SkyScan query 17:06:59 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.67<-16578 Statuses=0009 0009 17:06:59 Msec=0 True Az=64.29 Ze=-68.67 Az status=0009 Ze status=0009 17:06:59 Check angles 17:06:59 SkyScan query 17:07:00 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.625<-17975 Statuses=0009 0009 17:07:00 Msec=750 True Az=81.735 Ze=-89.625 Az status=0009 Ze status=0009 17:07:00 Check angles 17:07:00 SkyScan query 17:07:00 SkyScan query done: ret=0 az=99.57<-6638 ze=-111<-19400 Statuses=0009 0009 17:07:00 Msec=1500 True Az=99.57 Ze=-111 Az status=0009 Ze status=0009 17:07:00 Check angles 17:07:00 SkyScan query 17:07:01 SkyScan query done: ret=0 az=117.075<-7805 ze=-131.91<-20794 Statuses=0009 0009 17:07:01 Msec=2250 True Az=117.075 Ze=-131.91 Az status=0009 Ze status=0009 17:07:01 Check angles 17:07:01 SkyScan query 17:07:02 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 17:07:02 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 17:07:02 Check angles 17:07:02 SkyScan query 17:07:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 17:07:03 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 17:07:03 Message to Master queued w/err=0: serial=149307 error=0 17:07:08 Received message from Master: op=Filter serial=149308 17:07:08 Color wheel filter change from 0 to 0 17:07:08 FLIGetFilterPos err=0 currentPosition=0 17:07:08 FLIGetStepsRemaining err=0 RemainingSteps=0 17:07:08 Filter is already there-color wheel unchanged 17:07:08 Received message from Master: op=Shutter serial=149309 17:07:08 Shutter LASER close 17:07:08 Received message from Camera: op=State serial=149311 17:07:08 GetSingleValue result=40 Value=cccccccc 17:07:08 SkyScan query 17:07:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:07:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:08 Parameters OK 17:07:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:08 Set A/D data flow result=40 17:07:08 Set A/D channel type result=40 17:07:08 Set A/D encoding result=40 17:07:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:08 Set channel filter=0.000000e+000 result=40 17:07:08 Config A/D Result=40 17:07:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:08 Get A/D filter: -9.255963e+061 result=40 17:07:08 Get A/D value=-858993460 result=40 17:07:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:08 Parameters OK 17:07:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:08 Set A/D data flow result=40 17:07:08 Set A/D channel type result=40 17:07:08 Set A/D encoding result=40 17:07:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:08 Set channel filter=0.000000e+000 result=40 17:07:08 Config A/D Result=40 17:07:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:08 Get A/D filter: -9.255963e+061 result=40 17:07:08 Get A/D value=-858993460 result=40 17:07:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:07:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:07:08 Aux= 17:07:08 Message to Camera, serial 149311 queued 17:07:45 Received message from Master: op=PointingHead serial=149324 17:07:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:07:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:07:46 Point started: ret=0 17:07:46 point_skyscan result=0 17:07:46 Check angles 17:07:46 SkyScan query 17:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.345<-23423 Statuses=0009 0009 17:07:47 Msec=0 True Az=112.995 Ze=-171.345 Az status=0009 Ze status=0009 17:07:47 Check angles 17:07:47 SkyScan query 17:07:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:07:48 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:07:48 Message to Master queued w/err=0: serial=149324 error=0 17:07:53 Received message from Master: op=Filter serial=149325 17:07:53 Color wheel filter change from 0 to 0 17:07:53 FLIGetFilterPos err=0 currentPosition=0 17:07:53 FLIGetStepsRemaining err=0 RemainingSteps=0 17:07:53 Filter is already there-color wheel unchanged 17:07:53 Received message from Master: op=Shutter serial=149326 17:07:53 Shutter LASER open 17:07:53 Received message from Camera: op=State serial=149328 17:07:53 GetSingleValue result=40 Value=cccccccc 17:07:53 SkyScan query 17:07:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:07:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:54 Parameters OK 17:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:54 Set A/D data flow result=40 17:07:54 Set A/D channel type result=40 17:07:54 Set A/D encoding result=40 17:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:54 Set channel filter=0.000000e+000 result=40 17:07:54 Config A/D Result=40 17:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:54 Get A/D filter: -9.255963e+061 result=40 17:07:54 Get A/D value=-858993460 result=40 17:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:54 Parameters OK 17:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:54 Set A/D data flow result=40 17:07:54 Set A/D channel type result=40 17:07:54 Set A/D encoding result=40 17:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:54 Set channel filter=0.000000e+000 result=40 17:07:54 Config A/D Result=40 17:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:54 Get A/D filter: -9.255963e+061 result=40 17:07:54 Get A/D value=-858993460 result=40 17:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:07:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:07:54 Aux= 17:07:54 Message to Camera, serial 149328 queued 17:08:02 Received message from Master: op=Shutter serial=149338 17:08:02 Shutter LASER close 17:08:03 Received message from Master: op=PointingHead serial=149342 17:08:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:08:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:08:03 Point started: ret=0 17:08:03 point_skyscan result=0 17:08:04 Check angles 17:08:04 SkyScan query 17:08:04 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.4<-21560 Statuses=0009 0009 17:08:04 Msec=0 True Az=135.93 Ze=-143.4 Az status=0009 Ze status=0009 17:08:04 Check angles 17:08:04 SkyScan query 17:08:05 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.965<-20131 Statuses=0009 0009 17:08:05 Msec=750 True Az=153.78 Ze=-121.965 Az status=0009 Ze status=0009 17:08:05 Check angles 17:08:05 SkyScan query 17:08:06 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.995<-18733 Statuses=0009 0009 17:08:06 Msec=1500 True Az=171.24 Ze=-100.995 Az status=0009 Ze status=0009 17:08:06 Check angles 17:08:06 SkyScan query 17:08:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.115<-17341 Statuses=0008 0009 17:08:07 Msec=2250 True Az=176.01 Ze=-80.115 Az status=0008 Ze status=0009 17:08:07 Check angles 17:08:07 SkyScan query 17:08:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.085<-15939 Statuses=0008 0009 17:08:07 Msec=3000 True Az=176.01 Ze=-59.085 Az status=0008 Ze status=0009 17:08:07 Check angles 17:08:07 SkyScan query 17:08:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:08:08 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:08:08 Message to Master queued w/err=0: serial=149342 error=0 17:08:13 Received message from Master: op=Filter serial=149343 17:08:13 Color wheel filter change from 0 to 0 17:08:13 FLIGetFilterPos err=0 currentPosition=0 17:08:13 FLIGetStepsRemaining err=0 RemainingSteps=0 17:08:13 Filter is already there-color wheel unchanged 17:08:13 Received message from Master: op=Shutter serial=149344 17:08:13 Shutter LASER close 17:08:13 Received message from Camera: op=State serial=149346 17:08:13 GetSingleValue result=40 Value=cccccccc 17:08:13 SkyScan query 17:08:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:08:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:14 Parameters OK 17:08:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:14 Set A/D data flow result=40 17:08:14 Set A/D channel type result=40 17:08:14 Set A/D encoding result=40 17:08:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:14 Set channel filter=0.000000e+000 result=40 17:08:14 Config A/D Result=40 17:08:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:14 Get A/D filter: -9.255963e+061 result=40 17:08:14 Get A/D value=-858993460 result=40 17:08:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:14 Parameters OK 17:08:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:14 Set A/D data flow result=40 17:08:14 Set A/D channel type result=40 17:08:14 Set A/D encoding result=40 17:08:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:14 Set channel filter=0.000000e+000 result=40 17:08:14 Config A/D Result=40 17:08:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:14 Get A/D filter: -9.255963e+061 result=40 17:08:14 Get A/D value=-858993460 result=40 17:08:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:08:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:08:14 Aux= 17:08:14 Message to Camera, serial 149346 queued 17:08:50 Received message from Master: op=PointingHead serial=149358 17:08:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:08:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:08:50 Point started: ret=0 17:08:50 point_skyscan result=0 17:08:51 Check angles 17:08:51 SkyScan query 17:08:51 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.75<-13450 Statuses=0009 0009 17:08:51 Msec=0 True Az=152.985 Ze=-21.75 Az status=0009 Ze status=0009 17:08:52 Check angles 17:08:52 SkyScan query 17:08:52 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.3<-12020 Statuses=0009 0009 17:08:52 Msec=750 True Az=135.135 Ze=-0.3 Az status=0009 Ze status=0009 17:08:52 Check angles 17:08:52 SkyScan query 17:08:53 SkyScan query done: ret=0 az=117.645<-7843 ze=20.67<-10622 Statuses=0009 0009 17:08:53 Msec=1500 True Az=117.645 Ze=20.67 Az status=0009 Ze status=0009 17:08:53 Check angles 17:08:53 SkyScan query 17:08:54 SkyScan query done: ret=0 az=100.26<-6684 ze=41.58<-9228 Statuses=0009 0009 17:08:54 Msec=2250 True Az=100.26 Ze=41.58 Az status=0009 Ze status=0009 17:08:54 Check angles 17:08:54 SkyScan query 17:08:55 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 17:08:55 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 17:08:55 Check angles 17:08:55 SkyScan query 17:08:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:08:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:08:55 Message to Master queued w/err=0: serial=149358 error=0 17:09:00 Received message from Master: op=Filter serial=149359 17:09:00 Color wheel filter change from 0 to 0 17:09:00 FLIGetFilterPos err=0 currentPosition=0 17:09:00 FLIGetStepsRemaining err=0 RemainingSteps=0 17:09:00 Filter is already there-color wheel unchanged 17:09:00 Received message from Master: op=Shutter serial=149360 17:09:00 Shutter LASER close 17:09:00 Received message from Camera: op=State serial=149362 17:09:00 GetSingleValue result=40 Value=cccccccc 17:09:00 SkyScan query 17:09:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:09:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:01 Parameters OK 17:09:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:01 Set A/D data flow result=40 17:09:01 Set A/D channel type result=40 17:09:01 Set A/D encoding result=40 17:09:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:01 Set channel filter=0.000000e+000 result=40 17:09:01 Config A/D Result=40 17:09:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:01 Get A/D filter: -9.255963e+061 result=40 17:09:01 Get A/D value=-858993460 result=40 17:09:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:01 Parameters OK 17:09:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:01 Set A/D data flow result=40 17:09:01 Set A/D channel type result=40 17:09:01 Set A/D encoding result=40 17:09:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:01 Set channel filter=0.000000e+000 result=40 17:09:01 Config A/D Result=40 17:09:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:01 Get A/D filter: -9.255963e+061 result=40 17:09:01 Get A/D value=-858993460 result=40 17:09:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:09:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:09:01 Aux= 17:09:01 Message to Camera, serial 149362 queued 17:09:38 Received message from Master: op=PointingHead serial=149375 17:09:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:09:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:09:38 Point started: ret=0 17:09:38 point_skyscan result=0 17:09:39 Check angles 17:09:39 SkyScan query 17:09:40 SkyScan query done: ret=0 az=108.9<-7260 ze=38.49<-9434 Statuses=0009 0008 17:09:40 Msec=0 True Az=108.9 Ze=38.49 Az status=0009 Ze status=0008 17:09:40 Check angles 17:09:40 SkyScan query 17:09:40 SkyScan query done: ret=0 az=126.36<-8424 ze=38.505<-9433 Statuses=0009 0008 17:09:40 Msec=750 True Az=126.36 Ze=38.505 Az status=0009 Ze status=0008 17:09:40 Check angles 17:09:40 SkyScan query 17:09:41 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 17:09:41 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 17:09:41 Check angles 17:09:41 SkyScan query 17:09:42 SkyScan query done: ret=0 az=161.22<-10748 ze=38.505<-9433 Statuses=0009 0008 17:09:42 Msec=2250 True Az=161.22 Ze=38.505 Az status=0009 Ze status=0008 17:09:42 Check angles 17:09:42 SkyScan query 17:09:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 17:09:43 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 17:09:43 Check angles 17:09:43 SkyScan query 17:09:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:09:43 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:09:43 Message to Master queued w/err=0: serial=149375 error=0 17:09:48 Received message from Master: op=Filter serial=149376 17:09:48 Color wheel filter change from 0 to 0 17:09:48 FLIGetFilterPos err=0 currentPosition=0 17:09:48 FLIGetStepsRemaining err=0 RemainingSteps=0 17:09:48 Filter is already there-color wheel unchanged 17:09:48 Received message from Master: op=Shutter serial=149377 17:09:48 Shutter LASER close 17:09:49 Received message from Camera: op=State serial=149379 17:09:49 GetSingleValue result=40 Value=cccccccc 17:09:49 SkyScan query 17:09:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:09:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:49 Parameters OK 17:09:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:49 Set A/D data flow result=40 17:09:49 Set A/D channel type result=40 17:09:49 Set A/D encoding result=40 17:09:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:49 Set channel filter=0.000000e+000 result=40 17:09:49 Config A/D Result=40 17:09:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:49 Get A/D filter: -9.255963e+061 result=40 17:09:49 Get A/D value=-858993460 result=40 17:09:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:49 Parameters OK 17:09:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:49 Set A/D data flow result=40 17:09:49 Set A/D channel type result=40 17:09:49 Set A/D encoding result=40 17:09:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:49 Set channel filter=0.000000e+000 result=40 17:09:49 Config A/D Result=40 17:09:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:49 Get A/D filter: -9.255963e+061 result=40 17:09:49 Get A/D value=-858993460 result=40 17:09:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:09:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:09:49 Aux= 17:09:49 Message to Camera, serial 149379 queued 17:10:26 Received message from Master: op=PointingHead serial=149392 17:10:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:10:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:10:26 Point started: ret=0 17:10:26 point_skyscan result=0 17:10:27 Check angles 17:10:27 SkyScan query 17:10:28 SkyScan query done: ret=0 az=152.955<-10197 ze=8.685<-11421 Statuses=0009 0009 17:10:28 Msec=0 True Az=152.955 Ze=8.685 Az status=0009 Ze status=0009 17:10:28 Check angles 17:10:28 SkyScan query 17:10:28 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.285<-12819 Statuses=0009 0009 17:10:28 Msec=750 True Az=135.39 Ze=-12.285 Az status=0009 Ze status=0009 17:10:29 Check angles 17:10:29 SkyScan query 17:10:29 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.75<-14250 Statuses=0009 0009 17:10:29 Msec=1500 True Az=117.6 Ze=-33.75 Az status=0009 Ze status=0009 17:10:29 Check angles 17:10:29 SkyScan query 17:10:30 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.585<-15439 Statuses=0009 0009 17:10:30 Msec=2250 True Az=100.2 Ze=-51.585 Az status=0009 Ze status=0009 17:10:30 Check angles 17:10:30 SkyScan query 17:10:31 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 17:10:31 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 17:10:31 Check angles 17:10:31 SkyScan query 17:10:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:10:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:10:31 Message to Master queued w/err=0: serial=149392 error=0 17:10:36 Received message from Master: op=Filter serial=149393 17:10:36 Color wheel filter change from 0 to 0 17:10:36 FLIGetFilterPos err=0 currentPosition=0 17:10:36 FLIGetStepsRemaining err=0 RemainingSteps=0 17:10:36 Filter is already there-color wheel unchanged 17:10:37 Received message from Master: op=Shutter serial=149394 17:10:37 Shutter LASER close 17:10:37 Received message from Camera: op=State serial=149396 17:10:37 GetSingleValue result=40 Value=cccccccc 17:10:37 SkyScan query 17:10:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:10:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:37 Parameters OK 17:10:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:37 Set A/D data flow result=40 17:10:37 Set A/D channel type result=40 17:10:37 Set A/D encoding result=40 17:10:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:37 Set channel filter=0.000000e+000 result=40 17:10:37 Config A/D Result=40 17:10:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:37 Get A/D filter: -9.255963e+061 result=40 17:10:37 Get A/D value=-858993460 result=40 17:10:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:37 Parameters OK 17:10:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:37 Set A/D data flow result=40 17:10:37 Set A/D channel type result=40 17:10:37 Set A/D encoding result=40 17:10:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:37 Set channel filter=0.000000e+000 result=40 17:10:37 Config A/D Result=40 17:10:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:37 Get A/D filter: -9.255963e+061 result=40 17:10:37 Get A/D value=-858993460 result=40 17:10:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:10:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:10:37 Aux= 17:10:37 Message to Camera, serial 149396 queued 17:11:14 Received message from Master: op=PointingHead serial=149409 17:11:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:11:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:11:14 Point started: ret=0 17:11:14 point_skyscan result=0 17:11:15 Check angles 17:11:15 SkyScan query 17:11:16 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.27<-17418 Statuses=0009 0009 17:11:16 Msec=0 True Az=108.915 Ze=-81.27 Az status=0009 Ze status=0009 17:11:16 Check angles 17:11:16 SkyScan query 17:11:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.195<-18813 Statuses=0008 0009 17:11:16 Msec=750 True Az=112.995 Ze=-102.195 Az status=0008 Ze status=0009 17:11:17 Check angles 17:11:17 SkyScan query 17:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.105<-20207 Statuses=0008 0009 17:11:17 Msec=1500 True Az=112.995 Ze=-123.105 Az status=0008 Ze status=0009 17:11:17 Check angles 17:11:17 SkyScan query 17:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.075<-21605 Statuses=0008 0009 17:11:18 Msec=2250 True Az=112.995 Ze=-144.075 Az status=0008 Ze status=0009 17:11:18 Check angles 17:11:18 SkyScan query 17:11:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.015<-23001 Statuses=0008 0009 17:11:19 Msec=3000 True Az=112.995 Ze=-165.015 Az status=0008 Ze status=0009 17:11:19 Check angles 17:11:19 SkyScan query 17:11:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:11:19 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:11:19 Message to Master queued w/err=0: serial=149409 error=0 17:11:24 Received message from Master: op=Filter serial=149410 17:11:24 Color wheel filter change from 0 to 0 17:11:24 FLIGetFilterPos err=0 currentPosition=0 17:11:24 FLIGetStepsRemaining err=0 RemainingSteps=0 17:11:24 Filter is already there-color wheel unchanged 17:11:25 Received message from Master: op=Shutter serial=149411 17:11:25 Shutter LASER open 17:11:25 Received message from Camera: op=State serial=149413 17:11:25 GetSingleValue result=40 Value=cccccccc 17:11:25 SkyScan query 17:11:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:11:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:25 Parameters OK 17:11:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:25 Set A/D data flow result=40 17:11:25 Set A/D channel type result=40 17:11:25 Set A/D encoding result=40 17:11:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:25 Set channel filter=0.000000e+000 result=40 17:11:25 Config A/D Result=40 17:11:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:25 Get A/D filter: -9.255963e+061 result=40 17:11:25 Get A/D value=-858993460 result=40 17:11:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:25 Parameters OK 17:11:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:25 Set A/D data flow result=40 17:11:25 Set A/D channel type result=40 17:11:25 Set A/D encoding result=40 17:11:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:25 Set channel filter=0.000000e+000 result=40 17:11:25 Config A/D Result=40 17:11:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:25 Get A/D filter: -9.255963e+061 result=40 17:11:25 Get A/D value=-858993460 result=40 17:11:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:11:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:11:25 Aux= 17:11:25 Message to Camera, serial 149413 queued 17:11:34 Received message from Master: op=Shutter serial=149423 17:11:34 Shutter LASER close 17:11:34 Received message from Master: op=PointingHead serial=149427 17:11:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:11:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:11:35 Point started: ret=0 17:11:35 point_skyscan result=0 17:11:35 Check angles 17:11:35 SkyScan query 17:11:36 SkyScan query done: ret=0 az=89.52<-5968 ze=156.855<-1543 Statuses=0009 0009 17:11:36 Msec=0 True Az=89.52 Ze=156.855 Az status=0009 Ze status=0009 17:11:36 Check angles 17:11:36 SkyScan query 17:11:37 SkyScan query done: ret=0 az=71.985<-4799 ze=135.81<-2946 Statuses=0009 0009 17:11:37 Msec=750 True Az=71.985 Ze=135.81 Az status=0009 Ze status=0009 17:11:37 Check angles 17:11:37 SkyScan query 17:11:37 SkyScan query done: ret=0 az=54.615<-3641 ze=114.93<-4338 Statuses=0009 0009 17:11:37 Msec=1500 True Az=54.615 Ze=114.93 Az status=0009 Ze status=0009 17:11:38 Check angles 17:11:38 SkyScan query 17:11:38 SkyScan query done: ret=0 az=41.01<-2734 ze=93.96<-5736 Statuses=0009 0009 17:11:38 Msec=2250 True Az=41.01 Ze=93.96 Az status=0009 Ze status=0009 17:11:38 Check angles 17:11:38 SkyScan query 17:11:39 SkyScan query done: ret=0 az=40.995<-2733 ze=73.005<-7133 Statuses=0008 0009 17:11:39 Msec=3000 True Az=40.995 Ze=73.005 Az status=0008 Ze status=0009 17:11:39 Check angles 17:11:39 SkyScan query 17:11:40 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 17:11:40 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 17:11:40 Check angles 17:11:40 SkyScan query 17:11:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:11:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:11:40 Message to Master queued w/err=0: serial=149427 error=0 17:11:45 Received message from Master: op=Filter serial=149428 17:11:45 Color wheel filter change from 0 to 0 17:11:45 FLIGetFilterPos err=0 currentPosition=0 17:11:45 FLIGetStepsRemaining err=0 RemainingSteps=0 17:11:45 Filter is already there-color wheel unchanged 17:11:46 Received message from Master: op=Shutter serial=149429 17:11:46 Shutter LASER close 17:11:46 Received message from Camera: op=State serial=149431 17:11:46 GetSingleValue result=40 Value=cccccccc 17:11:46 SkyScan query 17:11:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:11:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:46 Parameters OK 17:11:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:46 Set A/D data flow result=40 17:11:46 Set A/D channel type result=40 17:11:46 Set A/D encoding result=40 17:11:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:46 Set channel filter=0.000000e+000 result=40 17:11:46 Config A/D Result=40 17:11:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:46 Get A/D filter: -9.255963e+061 result=40 17:11:46 Get A/D value=-858993460 result=40 17:11:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:46 Parameters OK 17:11:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:46 Set A/D data flow result=40 17:11:46 Set A/D channel type result=40 17:11:46 Set A/D encoding result=40 17:11:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:46 Set channel filter=0.000000e+000 result=40 17:11:46 Config A/D Result=40 17:11:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:46 Get A/D filter: -9.255963e+061 result=40 17:11:46 Get A/D value=-858993460 result=40 17:11:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:11:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:11:46 Aux= 17:11:46 Message to Camera, serial 149431 queued 17:12:23 Received message from Master: op=PointingHead serial=149444 17:12:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:12:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:12:24 Point started: ret=0 17:12:24 point_skyscan result=0 17:12:24 Check angles 17:12:24 SkyScan query 17:12:25 SkyScan query done: ret=0 az=64.365<-4291 ze=66.555<-7563 Statuses=0009 0008 17:12:25 Msec=0 True Az=64.365 Ze=66.555 Az status=0009 Ze status=0008 17:12:25 Check angles 17:12:25 SkyScan query 17:12:26 SkyScan query done: ret=0 az=81.885<-5459 ze=66.495<-7567 Statuses=0009 0008 17:12:26 Msec=750 True Az=81.885 Ze=66.495 Az status=0009 Ze status=0008 17:12:26 Check angles 17:12:26 SkyScan query 17:12:26 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 17:12:26 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 17:12:27 Check angles 17:12:27 SkyScan query 17:12:27 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 17:12:27 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 17:12:27 Check angles 17:12:27 SkyScan query 17:12:28 SkyScan query done: ret=0 az=134.37<-8958 ze=66.495<-7567 Statuses=0009 0008 17:12:28 Msec=3000 True Az=134.37 Ze=66.495 Az status=0009 Ze status=0008 17:12:28 Check angles 17:12:28 SkyScan query 17:12:29 SkyScan query done: ret=0 az=151.68<-10112 ze=66.495<-7567 Statuses=0009 0008 17:12:29 Msec=3750 True Az=151.68 Ze=66.495 Az status=0009 Ze status=0008 17:12:29 Check angles 17:12:29 SkyScan query 17:12:29 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 17:12:29 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 17:12:29 Message to Master queued w/err=0: serial=149444 error=0 17:12:34 Received message from Master: op=Filter serial=149445 17:12:34 Color wheel filter change from 0 to 0 17:12:34 FLIGetFilterPos err=0 currentPosition=0 17:12:34 FLIGetStepsRemaining err=0 RemainingSteps=0 17:12:34 Filter is already there-color wheel unchanged 17:12:35 Received message from Master: op=Shutter serial=149446 17:12:35 Shutter LASER close 17:12:35 Received message from Camera: op=State serial=149448 17:12:35 GetSingleValue result=40 Value=cccccccc 17:12:35 SkyScan query 17:12:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:12:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:12:35 Parameters OK 17:12:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:12:35 Set A/D data flow result=40 17:12:35 Set A/D channel type result=40 17:12:35 Set A/D encoding result=40 17:12:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:12:35 Set channel filter=0.000000e+000 result=40 17:12:35 Config A/D Result=40 17:12:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:12:35 Get A/D filter: -9.255963e+061 result=40 17:12:35 Get A/D value=-858993460 result=40 17:12:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:12:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:12:35 Parameters OK 17:12:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:12:35 Set A/D data flow result=40 17:12:35 Set A/D channel type result=40 17:12:35 Set A/D encoding result=40 17:12:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:12:35 Set channel filter=0.000000e+000 result=40 17:12:35 Config A/D Result=40 17:12:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:12:35 Get A/D filter: -9.255963e+061 result=40 17:12:35 Get A/D value=-858993460 result=40 17:12:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:12:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:12:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:12:35 Aux= 17:12:35 Message to Camera, serial 149448 queued 17:13:12 Received message from Master: op=PointingHead serial=149461 17:13:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:13:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:13:12 Point started: ret=0 17:13:12 point_skyscan result=0 17:13:13 Check angles 17:13:13 SkyScan query 17:13:14 SkyScan query done: ret=0 az=135.06<-9004 ze=36.795<-9547 Statuses=0009 0009 17:13:14 Msec=0 True Az=135.06 Ze=36.795 Az status=0009 Ze status=0009 17:13:14 Check angles 17:13:14 SkyScan query 17:13:14 SkyScan query done: ret=0 az=117.225<-7815 ze=15.465<-10969 Statuses=0009 0009 17:13:14 Msec=750 True Az=117.225 Ze=15.465 Az status=0009 Ze status=0009 17:13:15 Check angles 17:13:15 SkyScan query 17:13:15 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.565<-12371 Statuses=0009 0009 17:13:15 Msec=1500 True Az=99.825 Ze=-5.565 Az status=0009 Ze status=0009 17:13:15 Check angles 17:13:15 SkyScan query 17:13:16 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.52<-13768 Statuses=0009 0009 17:13:16 Msec=2250 True Az=82.2 Ze=-26.52 Az status=0009 Ze status=0009 17:13:16 Check angles 17:13:16 SkyScan query 17:13:17 SkyScan query done: ret=0 az=64.785<-4319 ze=-38.595<-14573 Statuses=0009 0008 17:13:17 Msec=3000 True Az=64.785 Ze=-38.595 Az status=0009 Ze status=0008 17:13:17 Check angles 17:13:17 SkyScan query 17:13:17 SkyScan query done: ret=0 az=47.235<-3149 ze=-38.52<-14568 Statuses=0009 0008 17:13:17 Msec=3750 True Az=47.235 Ze=-38.52 Az status=0009 Ze status=0008 17:13:18 Check angles 17:13:18 SkyScan query 17:13:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:13:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:13:18 Message to Master queued w/err=0: serial=149461 error=0 17:13:23 Received message from Master: op=Filter serial=149462 17:13:23 Color wheel filter change from 0 to 0 17:13:23 FLIGetFilterPos err=0 currentPosition=0 17:13:23 FLIGetStepsRemaining err=0 RemainingSteps=0 17:13:23 Filter is already there-color wheel unchanged 17:13:23 Received message from Master: op=Shutter serial=149463 17:13:23 Shutter LASER close 17:13:23 Received message from Camera: op=State serial=149465 17:13:23 GetSingleValue result=40 Value=cccccccc 17:13:23 SkyScan query 17:13:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:13:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:24 Parameters OK 17:13:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:24 Set A/D data flow result=40 17:13:24 Set A/D channel type result=40 17:13:24 Set A/D encoding result=40 17:13:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:24 Set channel filter=0.000000e+000 result=40 17:13:24 Config A/D Result=40 17:13:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:24 Get A/D filter: -9.255963e+061 result=40 17:13:24 Get A/D value=-858993460 result=40 17:13:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:24 Parameters OK 17:13:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:24 Set A/D data flow result=40 17:13:24 Set A/D channel type result=40 17:13:24 Set A/D encoding result=40 17:13:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:24 Set channel filter=0.000000e+000 result=40 17:13:24 Config A/D Result=40 17:13:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:24 Get A/D filter: -9.255963e+061 result=40 17:13:24 Get A/D value=-858993460 result=40 17:13:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:13:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:13:24 Aux= 17:13:24 Message to Camera, serial 149465 queued 17:14:00 Received message from Master: op=PointingHead serial=149477 17:14:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:14:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:14:00 Point started: ret=0 17:14:00 point_skyscan result=0 17:14:01 Check angles 17:14:01 SkyScan query 17:14:02 SkyScan query done: ret=0 az=63.705<-4247 ze=-68.085<-16539 Statuses=0009 0009 17:14:02 Msec=0 True Az=63.705 Ze=-68.085 Az status=0009 Ze status=0009 17:14:02 Check angles 17:14:02 SkyScan query 17:14:02 SkyScan query done: ret=0 az=81.195<-5413 ze=-89.055<-17937 Statuses=0009 0009 17:14:02 Msec=750 True Az=81.195 Ze=-89.055 Az status=0009 Ze status=0009 17:14:02 Check angles 17:14:02 SkyScan query 17:14:03 SkyScan query done: ret=0 az=98.775<-6585 ze=-109.935<-19329 Statuses=0009 0009 17:14:03 Msec=1500 True Az=98.775 Ze=-109.935 Az status=0009 Ze status=0009 17:14:03 Check angles 17:14:03 SkyScan query 17:14:04 SkyScan query done: ret=0 az=116.61<-7774 ze=-131.355<-20757 Statuses=0009 0009 17:14:04 Msec=2250 True Az=116.61 Ze=-131.355 Az status=0009 Ze status=0009 17:14:04 Check angles 17:14:04 SkyScan query 17:14:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 17:14:05 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 17:14:05 Check angles 17:14:05 SkyScan query 17:14:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 17:14:05 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 17:14:05 Message to Master queued w/err=0: serial=149477 error=0 17:14:10 Received message from Master: op=Filter serial=149478 17:14:10 Color wheel filter change from 0 to 0 17:14:10 FLIGetFilterPos err=0 currentPosition=0 17:14:10 FLIGetStepsRemaining err=0 RemainingSteps=0 17:14:10 Filter is already there-color wheel unchanged 17:14:10 Received message from Master: op=Shutter serial=149479 17:14:10 Shutter LASER close 17:14:11 Received message from Camera: op=State serial=149481 17:14:11 GetSingleValue result=40 Value=cccccccc 17:14:11 SkyScan query 17:14:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:14:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:11 Parameters OK 17:14:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:11 Set A/D data flow result=40 17:14:11 Set A/D channel type result=40 17:14:11 Set A/D encoding result=40 17:14:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:11 Set channel filter=0.000000e+000 result=40 17:14:11 Config A/D Result=40 17:14:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:11 Get A/D filter: -9.255963e+061 result=40 17:14:11 Get A/D value=-858993460 result=40 17:14:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:11 Parameters OK 17:14:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:11 Set A/D data flow result=40 17:14:11 Set A/D channel type result=40 17:14:11 Set A/D encoding result=40 17:14:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:11 Set channel filter=0.000000e+000 result=40 17:14:11 Config A/D Result=40 17:14:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:11 Get A/D filter: -9.255963e+061 result=40 17:14:11 Get A/D value=-858993460 result=40 17:14:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:14:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:14:11 Aux= 17:14:11 Message to Camera, serial 149481 queued 17:14:48 Received message from Master: op=PointingHead serial=149494 17:14:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:14:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:14:48 Point started: ret=0 17:14:48 point_skyscan result=0 17:14:49 Check angles 17:14:49 SkyScan query 17:14:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0009 0009 17:14:50 Msec=0 True Az=112.995 Ze=-171.135 Az status=0009 Ze status=0009 17:14:50 Check angles 17:14:50 SkyScan query 17:14:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:14:50 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:14:50 Message to Master queued w/err=0: serial=149494 error=0 17:14:55 Received message from Master: op=Filter serial=149495 17:14:55 Color wheel filter change from 0 to 0 17:14:55 FLIGetFilterPos err=0 currentPosition=0 17:14:55 FLIGetStepsRemaining err=0 RemainingSteps=0 17:14:55 Filter is already there-color wheel unchanged 17:14:56 Received message from Master: op=Shutter serial=149496 17:14:56 Shutter LASER open 17:14:56 Received message from Camera: op=State serial=149498 17:14:56 GetSingleValue result=40 Value=cccccccc 17:14:56 SkyScan query 17:14:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:14:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:56 Parameters OK 17:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:56 Set A/D data flow result=40 17:14:56 Set A/D channel type result=40 17:14:56 Set A/D encoding result=40 17:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:56 Set channel filter=0.000000e+000 result=40 17:14:56 Config A/D Result=40 17:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:56 Get A/D filter: -9.255963e+061 result=40 17:14:56 Get A/D value=-858993460 result=40 17:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:56 Parameters OK 17:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:56 Set A/D data flow result=40 17:14:56 Set A/D channel type result=40 17:14:56 Set A/D encoding result=40 17:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:56 Set channel filter=0.000000e+000 result=40 17:14:56 Config A/D Result=40 17:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:56 Get A/D filter: -9.255963e+061 result=40 17:14:56 Get A/D value=-858993460 result=40 17:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:14:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:14:56 Aux= 17:14:56 Message to Camera, serial 149498 queued 17:15:05 Received message from Master: op=Shutter serial=149508 17:15:05 Shutter LASER close 17:15:05 Received message from Master: op=PointingHead serial=149512 17:15:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:15:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:15:06 Point started: ret=0 17:15:06 point_skyscan result=0 17:15:06 Check angles 17:15:06 SkyScan query 17:15:07 SkyScan query done: ret=0 az=136.365<-9091 ze=-143.13<-21542 Statuses=0009 0009 17:15:07 Msec=0 True Az=136.365 Ze=-143.13 Az status=0009 Ze status=0009 17:15:07 Check angles 17:15:07 SkyScan query 17:15:08 SkyScan query done: ret=0 az=154.215<-10281 ze=-121.725<-20115 Statuses=0009 0009 17:15:08 Msec=750 True Az=154.215 Ze=-121.725 Az status=0009 Ze status=0009 17:15:08 Check angles 17:15:08 SkyScan query 17:15:08 SkyScan query done: ret=0 az=171.645<-11443 ze=-100.65<-18710 Statuses=0009 0009 17:15:08 Msec=1500 True Az=171.645 Ze=-100.65 Az status=0009 Ze status=0009 17:15:09 Check angles 17:15:09 SkyScan query 17:15:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.785<-17319 Statuses=0008 0009 17:15:09 Msec=2250 True Az=176.01 Ze=-79.785 Az status=0008 Ze status=0009 17:15:09 Check angles 17:15:09 SkyScan query 17:15:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.335<-15889 Statuses=0008 0009 17:15:10 Msec=3000 True Az=176.01 Ze=-58.335 Az status=0008 Ze status=0009 17:15:10 Check angles 17:15:10 SkyScan query 17:15:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:15:11 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:15:11 Message to Master queued w/err=0: serial=149512 error=0 17:15:16 Received message from Master: op=Filter serial=149513 17:15:16 Color wheel filter change from 0 to 0 17:15:16 FLIGetFilterPos err=0 currentPosition=0 17:15:16 FLIGetStepsRemaining err=0 RemainingSteps=0 17:15:16 Filter is already there-color wheel unchanged 17:15:16 Received message from Master: op=Shutter serial=149514 17:15:16 Shutter LASER close 17:15:16 Received message from Camera: op=State serial=149516 17:15:16 GetSingleValue result=40 Value=cccccccc 17:15:16 SkyScan query 17:15:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:15:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:17 Parameters OK 17:15:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:17 Set A/D data flow result=40 17:15:17 Set A/D channel type result=40 17:15:17 Set A/D encoding result=40 17:15:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:17 Set channel filter=0.000000e+000 result=40 17:15:17 Config A/D Result=40 17:15:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:17 Get A/D filter: -9.255963e+061 result=40 17:15:17 Get A/D value=-858993460 result=40 17:15:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:17 Parameters OK 17:15:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:17 Set A/D data flow result=40 17:15:17 Set A/D channel type result=40 17:15:17 Set A/D encoding result=40 17:15:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:17 Set channel filter=0.000000e+000 result=40 17:15:17 Config A/D Result=40 17:15:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:17 Get A/D filter: -9.255963e+061 result=40 17:15:17 Get A/D value=-858993460 result=40 17:15:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:15:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:15:17 Aux= 17:15:17 Message to Camera, serial 149516 queued 17:15:27 Received message from Master: op=Identify serial=149517 [UTC 2018-12-14 17:15:52] 17:15:54 Received message from Master: op=PointingHead serial=149532 17:15:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:15:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:15:54 Point started: ret=0 17:15:54 point_skyscan result=0 17:15:55 Check angles 17:15:55 SkyScan query 17:15:55 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.065<-13471 Statuses=0009 0009 17:15:55 Msec=0 True Az=153.21 Ze=-22.065 Az status=0009 Ze status=0009 17:15:55 Check angles 17:15:55 SkyScan query 17:15:56 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.035<-12069 Statuses=0009 0009 17:15:56 Msec=750 True Az=135.795 Ze=-1.035 Az status=0009 Ze status=0009 17:15:56 Check angles 17:15:56 SkyScan query 17:15:57 SkyScan query done: ret=0 az=118.23<-7882 ze=19.875<-10675 Statuses=0009 0009 17:15:57 Msec=1500 True Az=118.23 Ze=19.875 Az status=0009 Ze status=0009 17:15:57 Check angles 17:15:57 SkyScan query 17:15:57 SkyScan query done: ret=0 az=100.545<-6703 ze=41.295<-9247 Statuses=0009 0009 17:15:57 Msec=2250 True Az=100.545 Ze=41.295 Az status=0009 Ze status=0009 17:15:58 Check angles 17:15:58 SkyScan query 17:15:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 17:15:58 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 17:15:58 Check angles 17:15:58 SkyScan query 17:15:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:15:59 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 17:15:59 Message to Master queued w/err=0: serial=149532 error=0 17:16:04 Received message from Master: op=Filter serial=149533 17:16:04 Color wheel filter change from 0 to 0 17:16:04 FLIGetFilterPos err=0 currentPosition=0 17:16:04 FLIGetStepsRemaining err=0 RemainingSteps=0 17:16:04 Filter is already there-color wheel unchanged 17:16:04 Received message from Master: op=Shutter serial=149534 17:16:04 Shutter LASER close 17:16:04 Received message from Camera: op=State serial=149536 17:16:04 GetSingleValue result=40 Value=cccccccc 17:16:04 SkyScan query 17:16:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 17:16:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:05 Parameters OK 17:16:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:05 Set A/D data flow result=40 17:16:05 Set A/D channel type result=40 17:16:05 Set A/D encoding result=40 17:16:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:05 Set channel filter=0.000000e+000 result=40 17:16:05 Config A/D Result=40 17:16:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:05 Get A/D filter: -9.255963e+061 result=40 17:16:05 Get A/D value=-858993460 result=40 17:16:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:05 Parameters OK 17:16:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:05 Set A/D data flow result=40 17:16:05 Set A/D channel type result=40 17:16:05 Set A/D encoding result=40 17:16:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:05 Set channel filter=0.000000e+000 result=40 17:16:05 Config A/D Result=40 17:16:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:05 Get A/D filter: -9.255963e+061 result=40 17:16:05 Get A/D value=-858993460 result=40 17:16:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:16:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:16:05 Aux= 17:16:05 Message to Camera, serial 149536 queued 17:16:42 Received message from Master: op=PointingHead serial=149549 17:16:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:16:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:16:42 Point started: ret=0 17:16:42 point_skyscan result=0 17:16:43 Check angles 17:16:43 SkyScan query 17:16:43 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 17:16:43 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 17:16:43 Check angles 17:16:43 SkyScan query 17:16:44 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 17:16:44 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 17:16:44 Check angles 17:16:44 SkyScan query 17:16:45 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 17:16:45 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 17:16:45 Check angles 17:16:45 SkyScan query 17:16:46 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 17:16:46 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 17:16:46 Check angles 17:16:46 SkyScan query 17:16:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 17:16:46 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 17:16:46 Check angles 17:16:46 SkyScan query 17:16:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:16:47 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:16:47 Message to Master queued w/err=0: serial=149549 error=0 17:16:52 Received message from Master: op=Filter serial=149550 17:16:52 Color wheel filter change from 0 to 0 17:16:52 FLIGetFilterPos err=0 currentPosition=0 17:16:52 FLIGetStepsRemaining err=0 RemainingSteps=0 17:16:52 Filter is already there-color wheel unchanged 17:16:52 Received message from Master: op=Shutter serial=149551 17:16:52 Shutter LASER close 17:16:52 Received message from Camera: op=State serial=149553 17:16:52 GetSingleValue result=40 Value=cccccccc 17:16:52 SkyScan query 17:16:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:16:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:53 Parameters OK 17:16:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:53 Set A/D data flow result=40 17:16:53 Set A/D channel type result=40 17:16:53 Set A/D encoding result=40 17:16:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:53 Set channel filter=0.000000e+000 result=40 17:16:53 Config A/D Result=40 17:16:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:53 Get A/D filter: -9.255963e+061 result=40 17:16:53 Get A/D value=-858993460 result=40 17:16:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:53 Parameters OK 17:16:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:53 Set A/D data flow result=40 17:16:53 Set A/D channel type result=40 17:16:53 Set A/D encoding result=40 17:16:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:53 Set channel filter=0.000000e+000 result=40 17:16:53 Config A/D Result=40 17:16:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:53 Get A/D filter: -9.255963e+061 result=40 17:16:53 Get A/D value=-858993460 result=40 17:16:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:16:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:16:53 Aux= 17:16:53 Message to Camera, serial 149553 queued 17:17:30 Received message from Master: op=PointingHead serial=149566 17:17:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:17:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:17:30 Point started: ret=0 17:17:30 point_skyscan result=0 17:17:31 Check angles 17:17:31 SkyScan query 17:17:31 SkyScan query done: ret=0 az=152.955<-10197 ze=8.79<-11414 Statuses=0009 0009 17:17:31 Msec=0 True Az=152.955 Ze=8.79 Az status=0009 Ze status=0009 17:17:32 Check angles 17:17:32 SkyScan query 17:17:32 SkyScan query done: ret=0 az=135.57<-9038 ze=-12.225<-12815 Statuses=0009 0009 17:17:32 Msec=750 True Az=135.57 Ze=-12.225 Az status=0009 Ze status=0009 17:17:32 Check angles 17:17:32 SkyScan query 17:17:33 SkyScan query done: ret=0 az=118.035<-7869 ze=-33.18<-14212 Statuses=0009 0009 17:17:33 Msec=1500 True Az=118.035 Ze=-33.18 Az status=0009 Ze status=0009 17:17:33 Check angles 17:17:33 SkyScan query 17:17:34 SkyScan query done: ret=0 az=100.65<-6710 ze=-51.54<-15436 Statuses=0009 0009 17:17:34 Msec=2250 True Az=100.65 Ze=-51.54 Az status=0009 Ze status=0009 17:17:34 Check angles 17:17:34 SkyScan query 17:17:34 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 17:17:34 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 17:17:35 Check angles 17:17:35 SkyScan query 17:17:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:17:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:17:35 Message to Master queued w/err=0: serial=149566 error=0 17:17:40 Received message from Master: op=Filter serial=149567 17:17:40 Color wheel filter change from 0 to 0 17:17:40 FLIGetFilterPos err=0 currentPosition=0 17:17:40 FLIGetStepsRemaining err=0 RemainingSteps=0 17:17:40 Filter is already there-color wheel unchanged 17:17:40 Received message from Master: op=Shutter serial=149568 17:17:40 Shutter LASER close 17:17:40 Received message from Camera: op=State serial=149570 17:17:40 GetSingleValue result=40 Value=cccccccc 17:17:40 SkyScan query 17:17:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:17:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:41 Parameters OK 17:17:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:41 Set A/D data flow result=40 17:17:41 Set A/D channel type result=40 17:17:41 Set A/D encoding result=40 17:17:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:41 Set channel filter=0.000000e+000 result=40 17:17:41 Config A/D Result=40 17:17:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:41 Get A/D filter: -9.255963e+061 result=40 17:17:41 Get A/D value=-858993460 result=40 17:17:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:41 Parameters OK 17:17:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:41 Set A/D data flow result=40 17:17:41 Set A/D channel type result=40 17:17:41 Set A/D encoding result=40 17:17:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:41 Set channel filter=0.000000e+000 result=40 17:17:41 Config A/D Result=40 17:17:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:41 Get A/D filter: -9.255963e+061 result=40 17:17:41 Get A/D value=-858993460 result=40 17:17:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:17:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:17:41 Aux= 17:17:41 Message to Camera, serial 149570 queued 17:18:18 Received message from Master: op=PointingHead serial=149583 17:18:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:18:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:18:18 Point started: ret=0 17:18:18 point_skyscan result=0 17:18:19 Check angles 17:18:19 SkyScan query 17:18:20 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.375<-17425 Statuses=0009 0009 17:18:20 Msec=0 True Az=109.125 Ze=-81.375 Az status=0009 Ze status=0009 17:18:20 Check angles 17:18:20 SkyScan query 17:18:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.345<-18823 Statuses=0008 0009 17:18:20 Msec=750 True Az=112.995 Ze=-102.345 Az status=0008 Ze status=0009 17:18:20 Check angles 17:18:20 SkyScan query 17:18:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.3<-20220 Statuses=0008 0009 17:18:21 Msec=1500 True Az=112.995 Ze=-123.3 Az status=0008 Ze status=0009 17:18:21 Check angles 17:18:21 SkyScan query 17:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.225<-21615 Statuses=0008 0009 17:18:22 Msec=2250 True Az=112.995 Ze=-144.225 Az status=0008 Ze status=0009 17:18:22 Check angles 17:18:22 SkyScan query 17:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.18<-23012 Statuses=0008 0009 17:18:23 Msec=3000 True Az=112.995 Ze=-165.18 Az status=0008 Ze status=0009 17:18:23 Check angles 17:18:23 SkyScan query 17:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:18:23 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:18:23 Message to Master queued w/err=0: serial=149583 error=0 17:18:28 Received message from Master: op=Filter serial=149584 17:18:28 Color wheel filter change from 0 to 0 17:18:28 FLIGetFilterPos err=0 currentPosition=0 17:18:28 FLIGetStepsRemaining err=0 RemainingSteps=0 17:18:28 Filter is already there-color wheel unchanged 17:18:28 Received message from Master: op=Shutter serial=149585 17:18:28 Shutter LASER open 17:18:29 Received message from Camera: op=State serial=149587 17:18:29 GetSingleValue result=40 Value=cccccccc 17:18:29 SkyScan query 17:18:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:18:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:29 Parameters OK 17:18:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:29 Set A/D data flow result=40 17:18:29 Set A/D channel type result=40 17:18:29 Set A/D encoding result=40 17:18:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:29 Set channel filter=0.000000e+000 result=40 17:18:29 Config A/D Result=40 17:18:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:29 Get A/D filter: -9.255963e+061 result=40 17:18:29 Get A/D value=-858993460 result=40 17:18:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:29 Parameters OK 17:18:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:29 Set A/D data flow result=40 17:18:29 Set A/D channel type result=40 17:18:29 Set A/D encoding result=40 17:18:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:29 Set channel filter=0.000000e+000 result=40 17:18:29 Config A/D Result=40 17:18:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:29 Get A/D filter: -9.255963e+061 result=40 17:18:29 Get A/D value=-858993460 result=40 17:18:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:18:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:18:29 Aux= 17:18:29 Message to Camera, serial 149587 queued 17:18:38 Received message from Master: op=Shutter serial=149597 17:18:38 Shutter LASER close 17:18:38 Received message from Master: op=PointingHead serial=149601 17:18:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:18:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:18:38 Point started: ret=0 17:18:38 point_skyscan result=0 17:18:39 Check angles 17:18:39 SkyScan query 17:18:40 SkyScan query done: ret=0 az=89.805<-5987 ze=157.2<-1520 Statuses=0009 0009 17:18:40 Msec=0 True Az=89.805 Ze=157.2 Az status=0009 Ze status=0009 17:18:40 Check angles 17:18:40 SkyScan query 17:18:40 SkyScan query done: ret=0 az=72<-4800 ze=135.84<-2944 Statuses=0009 0009 17:18:40 Msec=750 True Az=72 Ze=135.84 Az status=0009 Ze status=0009 17:18:41 Check angles 17:18:41 SkyScan query 17:18:41 SkyScan query done: ret=0 az=54.225<-3615 ze=114.36<-4376 Statuses=0009 0009 17:18:41 Msec=1500 True Az=54.225 Ze=114.36 Az status=0009 Ze status=0009 17:18:41 Check angles 17:18:41 SkyScan query 17:18:42 SkyScan query done: ret=0 az=40.995<-2733 ze=93.45<-5770 Statuses=0009 0009 17:18:42 Msec=2250 True Az=40.995 Ze=93.45 Az status=0009 Ze status=0009 17:18:42 Check angles 17:18:42 SkyScan query 17:18:43 SkyScan query done: ret=0 az=40.995<-2733 ze=72.48<-7168 Statuses=0008 0009 17:18:43 Msec=3000 True Az=40.995 Ze=72.48 Az status=0008 Ze status=0009 17:18:43 Check angles 17:18:43 SkyScan query 17:18:44 SkyScan query done: ret=0 az=40.995<-2733 ze=52.08<-8528 Statuses=0008 0009 17:18:44 Msec=3750 True Az=40.995 Ze=52.08 Az status=0008 Ze status=0009 17:18:44 Check angles 17:18:44 SkyScan query 17:18:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:18:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:18:44 Message to Master queued w/err=0: serial=149601 error=0 17:18:49 Received message from Master: op=Filter serial=149602 17:18:49 Color wheel filter change from 0 to 0 17:18:49 FLIGetFilterPos err=0 currentPosition=0 17:18:49 FLIGetStepsRemaining err=0 RemainingSteps=0 17:18:49 Filter is already there-color wheel unchanged 17:18:49 Received message from Master: op=Shutter serial=149603 17:18:49 Shutter LASER close 17:18:50 Received message from Camera: op=State serial=149605 17:18:50 GetSingleValue result=40 Value=cccccccc 17:18:50 SkyScan query 17:18:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:18:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:50 Parameters OK 17:18:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:50 Set A/D data flow result=40 17:18:50 Set A/D channel type result=40 17:18:50 Set A/D encoding result=40 17:18:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:50 Set channel filter=0.000000e+000 result=40 17:18:50 Config A/D Result=40 17:18:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:50 Get A/D filter: -9.255963e+061 result=40 17:18:50 Get A/D value=-858993460 result=40 17:18:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:50 Parameters OK 17:18:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:50 Set A/D data flow result=40 17:18:50 Set A/D channel type result=40 17:18:50 Set A/D encoding result=40 17:18:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:50 Set channel filter=0.000000e+000 result=40 17:18:50 Config A/D Result=40 17:18:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:50 Get A/D filter: -9.255963e+061 result=40 17:18:50 Get A/D value=-858993460 result=40 17:18:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:18:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:18:50 Aux= 17:18:50 Message to Camera, serial 149605 queued 17:19:27 Received message from Master: op=PointingHead serial=149618 17:19:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:19:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:19:27 Point started: ret=0 17:19:27 point_skyscan result=0 17:19:28 Check angles 17:19:28 SkyScan query 17:19:29 SkyScan query done: ret=0 az=64.35<-4290 ze=66.54<-7564 Statuses=0009 0008 17:19:29 Msec=0 True Az=64.35 Ze=66.54 Az status=0009 Ze status=0008 17:19:29 Check angles 17:19:29 SkyScan query 17:19:29 SkyScan query done: ret=0 az=82.29<-5486 ze=66.51<-7566 Statuses=0009 0008 17:19:29 Msec=750 True Az=82.29 Ze=66.51 Az status=0009 Ze status=0008 17:19:30 Check angles 17:19:30 SkyScan query 17:19:30 SkyScan query done: ret=0 az=99.705<-6647 ze=66.495<-7567 Statuses=0009 0008 17:19:30 Msec=1500 True Az=99.705 Ze=66.495 Az status=0009 Ze status=0008 17:19:30 Check angles 17:19:30 SkyScan query 17:19:31 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 17:19:31 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 17:19:31 Check angles 17:19:31 SkyScan query 17:19:32 SkyScan query done: ret=0 az=134.61<-8974 ze=66.495<-7567 Statuses=0009 0008 17:19:32 Msec=3000 True Az=134.61 Ze=66.495 Az status=0009 Ze status=0008 17:19:32 Check angles 17:19:32 SkyScan query 17:19:32 SkyScan query done: ret=0 az=152.4<-10160 ze=66.495<-7567 Statuses=0009 0008 17:19:32 Msec=3750 True Az=152.4 Ze=66.495 Az status=0009 Ze status=0008 17:19:33 Check angles 17:19:33 SkyScan query 17:19:33 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 17:19:33 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 17:19:33 Message to Master queued w/err=0: serial=149618 error=0 17:19:38 Received message from Master: op=Filter serial=149619 17:19:38 Color wheel filter change from 0 to 0 17:19:38 FLIGetFilterPos err=0 currentPosition=0 17:19:38 FLIGetStepsRemaining err=0 RemainingSteps=0 17:19:38 Filter is already there-color wheel unchanged 17:19:38 Received message from Master: op=Shutter serial=149620 17:19:38 Shutter LASER close 17:19:38 Received message from Camera: op=State serial=149622 17:19:38 GetSingleValue result=40 Value=cccccccc 17:19:38 SkyScan query 17:19:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:19:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:19:39 Parameters OK 17:19:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:19:39 Set A/D data flow result=40 17:19:39 Set A/D channel type result=40 17:19:39 Set A/D encoding result=40 17:19:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:19:39 Set channel filter=0.000000e+000 result=40 17:19:39 Config A/D Result=40 17:19:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:19:39 Get A/D filter: -9.255963e+061 result=40 17:19:39 Get A/D value=-858993460 result=40 17:19:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:19:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:19:39 Parameters OK 17:19:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:19:39 Set A/D data flow result=40 17:19:39 Set A/D channel type result=40 17:19:39 Set A/D encoding result=40 17:19:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:19:39 Set channel filter=0.000000e+000 result=40 17:19:39 Config A/D Result=40 17:19:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:19:39 Get A/D filter: -9.255963e+061 result=40 17:19:39 Get A/D value=-858993460 result=40 17:19:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:19:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:19:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:19:39 Aux= 17:19:39 Message to Camera, serial 149622 queued 17:20:16 Received message from Master: op=PointingHead serial=149635 17:20:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:20:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:20:16 Point started: ret=0 17:20:16 point_skyscan result=0 17:20:17 Check angles 17:20:17 SkyScan query 17:20:18 SkyScan query done: ret=0 az=135.135<-9009 ze=36.87<-9542 Statuses=0009 0009 17:20:18 Msec=0 True Az=135.135 Ze=36.87 Az status=0009 Ze status=0009 17:20:18 Check angles 17:20:18 SkyScan query 17:20:18 SkyScan query done: ret=0 az=117.66<-7844 ze=15.96<-10936 Statuses=0009 0009 17:20:18 Msec=750 True Az=117.66 Ze=15.96 Az status=0009 Ze status=0009 17:20:18 Check angles 17:20:18 SkyScan query 17:20:19 SkyScan query done: ret=0 az=100.32<-6688 ze=-4.995<-12333 Statuses=0009 0009 17:20:19 Msec=1500 True Az=100.32 Ze=-4.995 Az status=0009 Ze status=0009 17:20:19 Check angles 17:20:19 SkyScan query 17:20:20 SkyScan query done: ret=0 az=82.785<-5519 ze=-25.965<-13731 Statuses=0009 0009 17:20:20 Msec=2250 True Az=82.785 Ze=-25.965 Az status=0009 Ze status=0009 17:20:20 Check angles 17:20:20 SkyScan query 17:20:21 SkyScan query done: ret=0 az=65.355<-4357 ze=-38.595<-14573 Statuses=0009 0008 17:20:21 Msec=3000 True Az=65.355 Ze=-38.595 Az status=0009 Ze status=0008 17:20:21 Check angles 17:20:21 SkyScan query 17:20:21 SkyScan query done: ret=0 az=47.805<-3187 ze=-38.52<-14568 Statuses=0009 0008 17:20:21 Msec=3750 True Az=47.805 Ze=-38.52 Az status=0009 Ze status=0008 17:20:21 Check angles 17:20:21 SkyScan query 17:20:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:20:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:20:22 Message to Master queued w/err=0: serial=149635 error=0 17:20:27 Received message from Master: op=Filter serial=149636 17:20:27 Color wheel filter change from 0 to 0 17:20:27 FLIGetFilterPos err=0 currentPosition=0 17:20:27 FLIGetStepsRemaining err=0 RemainingSteps=0 17:20:27 Filter is already there-color wheel unchanged 17:20:27 Received message from Master: op=Shutter serial=149637 17:20:27 Shutter LASER close 17:20:27 Received message from Camera: op=State serial=149639 17:20:27 GetSingleValue result=40 Value=cccccccc 17:20:27 SkyScan query 17:20:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:20:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:28 Parameters OK 17:20:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:28 Set A/D data flow result=40 17:20:28 Set A/D channel type result=40 17:20:28 Set A/D encoding result=40 17:20:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:28 Set channel filter=0.000000e+000 result=40 17:20:28 Config A/D Result=40 17:20:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:28 Get A/D filter: -9.255963e+061 result=40 17:20:28 Get A/D value=-858993460 result=40 17:20:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:28 Parameters OK 17:20:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:28 Set A/D data flow result=40 17:20:28 Set A/D channel type result=40 17:20:28 Set A/D encoding result=40 17:20:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:28 Set channel filter=0.000000e+000 result=40 17:20:28 Config A/D Result=40 17:20:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:28 Get A/D filter: -9.255963e+061 result=40 17:20:28 Get A/D value=-858993460 result=40 17:20:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:20:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:20:28 Aux= 17:20:28 Message to Camera, serial 149639 queued 17:21:05 Received message from Master: op=PointingHead serial=149652 17:21:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:21:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:21:05 Point started: ret=0 17:21:05 point_skyscan result=0 17:21:06 Check angles 17:21:06 SkyScan query 17:21:06 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.4<-16560 Statuses=0009 0009 17:21:06 Msec=0 True Az=63.99 Ze=-68.4 Az status=0009 Ze status=0009 17:21:07 Check angles 17:21:07 SkyScan query 17:21:07 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.385<-17959 Statuses=0009 0009 17:21:07 Msec=750 True Az=81.555 Ze=-89.385 Az status=0009 Ze status=0009 17:21:07 Check angles 17:21:07 SkyScan query 17:21:08 SkyScan query done: ret=0 az=98.925<-6595 ze=-110.295<-19353 Statuses=0009 0009 17:21:08 Msec=1500 True Az=98.925 Ze=-110.295 Az status=0009 Ze status=0009 17:21:08 Check angles 17:21:08 SkyScan query 17:21:09 SkyScan query done: ret=0 az=116.43<-7762 ze=-131.235<-20749 Statuses=0009 0009 17:21:09 Msec=2250 True Az=116.43 Ze=-131.235 Az status=0009 Ze status=0009 17:21:09 Check angles 17:21:09 SkyScan query 17:21:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.57<-21438 Statuses=0009 0008 17:21:09 Msec=3000 True Az=131.01 Ze=-141.57 Az status=0009 Ze status=0008 17:21:10 Check angles 17:21:10 SkyScan query 17:21:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 17:21:10 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 17:21:10 Message to Master queued w/err=0: serial=149652 error=0 17:21:15 Received message from Master: op=Filter serial=149653 17:21:15 Color wheel filter change from 0 to 0 17:21:15 FLIGetFilterPos err=0 currentPosition=0 17:21:15 FLIGetStepsRemaining err=0 RemainingSteps=0 17:21:15 Filter is already there-color wheel unchanged 17:21:15 Received message from Master: op=Shutter serial=149654 17:21:15 Shutter LASER close 17:21:15 Received message from Camera: op=State serial=149656 17:21:15 GetSingleValue result=40 Value=cccccccc 17:21:15 SkyScan query 17:21:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:21:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:16 Parameters OK 17:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:16 Set A/D data flow result=40 17:21:16 Set A/D channel type result=40 17:21:16 Set A/D encoding result=40 17:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:16 Set channel filter=0.000000e+000 result=40 17:21:16 Config A/D Result=40 17:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:16 Get A/D filter: -9.255963e+061 result=40 17:21:16 Get A/D value=-858993460 result=40 17:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:16 Parameters OK 17:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:16 Set A/D data flow result=40 17:21:16 Set A/D channel type result=40 17:21:16 Set A/D encoding result=40 17:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:16 Set channel filter=0.000000e+000 result=40 17:21:16 Config A/D Result=40 17:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:16 Get A/D filter: -9.255963e+061 result=40 17:21:16 Get A/D value=-858993460 result=40 17:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:21:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:21:16 Aux= 17:21:16 Message to Camera, serial 149656 queued 17:21:53 Received message from Master: op=PointingHead serial=149669 17:21:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:21:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:21:53 Point started: ret=0 17:21:53 point_skyscan result=0 17:21:54 Check angles 17:21:54 SkyScan query 17:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0009 0009 17:21:54 Msec=0 True Az=112.995 Ze=-171.165 Az status=0009 Ze status=0009 17:21:55 Check angles 17:21:55 SkyScan query 17:21:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:21:55 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:21:55 Message to Master queued w/err=0: serial=149669 error=0 17:22:00 Received message from Master: op=Filter serial=149670 17:22:00 Color wheel filter change from 0 to 0 17:22:00 FLIGetFilterPos err=0 currentPosition=0 17:22:00 FLIGetStepsRemaining err=0 RemainingSteps=0 17:22:00 Filter is already there-color wheel unchanged 17:22:00 Received message from Master: op=Shutter serial=149671 17:22:00 Shutter LASER open 17:22:00 Received message from Camera: op=State serial=149673 17:22:00 GetSingleValue result=40 Value=cccccccc 17:22:00 SkyScan query 17:22:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:22:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:01 Parameters OK 17:22:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:01 Set A/D data flow result=40 17:22:01 Set A/D channel type result=40 17:22:01 Set A/D encoding result=40 17:22:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:01 Set channel filter=0.000000e+000 result=40 17:22:01 Config A/D Result=40 17:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:01 Get A/D filter: -9.255963e+061 result=40 17:22:01 Get A/D value=-858993460 result=40 17:22:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:01 Parameters OK 17:22:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:01 Set A/D data flow result=40 17:22:01 Set A/D channel type result=40 17:22:01 Set A/D encoding result=40 17:22:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:01 Set channel filter=0.000000e+000 result=40 17:22:01 Config A/D Result=40 17:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:01 Get A/D filter: -9.255963e+061 result=40 17:22:01 Get A/D value=-858993460 result=40 17:22:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:22:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:22:01 Aux= 17:22:01 Message to Camera, serial 149673 queued 17:22:09 Received message from Master: op=Shutter serial=149683 17:22:09 Shutter LASER close 17:22:10 Received message from Master: op=PointingHead serial=149687 17:22:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:22:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:22:10 Point started: ret=0 17:22:10 point_skyscan result=0 17:22:11 Check angles 17:22:11 SkyScan query 17:22:12 SkyScan query done: ret=0 az=136.2<-9080 ze=-142.995<-21533 Statuses=0009 0009 17:22:12 Msec=0 True Az=136.2 Ze=-142.995 Az status=0009 Ze status=0009 17:22:12 Check angles 17:22:12 SkyScan query 17:22:13 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.995<-20133 Statuses=0009 0009 17:22:13 Msec=750 True Az=153.78 Ze=-121.995 Az status=0009 Ze status=0009 17:22:13 Check angles 17:22:13 SkyScan query 17:22:13 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.025<-18735 Statuses=0009 0009 17:22:13 Msec=1500 True Az=171.21 Ze=-101.025 Az status=0009 Ze status=0009 17:22:13 Check angles 17:22:13 SkyScan query 17:22:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.145<-17343 Statuses=0008 0009 17:22:14 Msec=2250 True Az=176.01 Ze=-80.145 Az status=0008 Ze status=0009 17:22:14 Check angles 17:22:14 SkyScan query 17:22:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.13<-15942 Statuses=0008 0009 17:22:15 Msec=3000 True Az=176.01 Ze=-59.13 Az status=0008 Ze status=0009 17:22:15 Check angles 17:22:15 SkyScan query 17:22:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:22:16 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:22:16 Message to Master queued w/err=0: serial=149687 error=0 17:22:21 Received message from Master: op=Filter serial=149688 17:22:21 Color wheel filter change from 0 to 0 17:22:21 FLIGetFilterPos err=0 currentPosition=0 17:22:21 FLIGetStepsRemaining err=0 RemainingSteps=0 17:22:21 Filter is already there-color wheel unchanged 17:22:21 Received message from Master: op=Shutter serial=149689 17:22:21 Shutter LASER close 17:22:21 Received message from Camera: op=State serial=149691 17:22:21 GetSingleValue result=40 Value=cccccccc 17:22:21 SkyScan query 17:22:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:22:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:21 Parameters OK 17:22:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:21 Set A/D data flow result=40 17:22:21 Set A/D channel type result=40 17:22:21 Set A/D encoding result=40 17:22:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:21 Set channel filter=0.000000e+000 result=40 17:22:21 Config A/D Result=40 17:22:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:21 Get A/D filter: -9.255963e+061 result=40 17:22:21 Get A/D value=-858993460 result=40 17:22:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:21 Parameters OK 17:22:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:21 Set A/D data flow result=40 17:22:21 Set A/D channel type result=40 17:22:21 Set A/D encoding result=40 17:22:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:21 Set channel filter=0.000000e+000 result=40 17:22:21 Config A/D Result=40 17:22:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:21 Get A/D filter: -9.255963e+061 result=40 17:22:21 Get A/D value=-858993460 result=40 17:22:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:22:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:22:21 Aux= 17:22:21 Message to Camera, serial 149691 queued 17:22:57 Received message from Master: op=PointingHead serial=149703 17:22:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:22:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:22:58 Point started: ret=0 17:22:58 point_skyscan result=0 17:22:58 Check angles 17:22:58 SkyScan query 17:22:59 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.81<-13454 Statuses=0009 0009 17:22:59 Msec=0 True Az=152.955 Ze=-21.81 Az status=0009 Ze status=0009 17:22:59 Check angles 17:22:59 SkyScan query 17:23:00 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.825<-12055 Statuses=0009 0009 17:23:00 Msec=750 True Az=135.585 Ze=-0.825 Az status=0009 Ze status=0009 17:23:00 Check angles 17:23:00 SkyScan query 17:23:01 SkyScan query done: ret=0 az=118.035<-7869 ze=20.085<-10661 Statuses=0009 0009 17:23:01 Msec=1500 True Az=118.035 Ze=20.085 Az status=0009 Ze status=0009 17:23:01 Check angles 17:23:01 SkyScan query 17:23:01 SkyScan query done: ret=0 az=100.665<-6711 ze=41.1<-9260 Statuses=0009 0009 17:23:01 Msec=2250 True Az=100.665 Ze=41.1 Az status=0009 Ze status=0009 17:23:01 Check angles 17:23:01 SkyScan query 17:23:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 17:23:02 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 17:23:02 Check angles 17:23:02 SkyScan query 17:23:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:23:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:23:03 Message to Master queued w/err=0: serial=149703 error=0 17:23:08 Received message from Master: op=Filter serial=149704 17:23:08 Color wheel filter change from 0 to 0 17:23:08 FLIGetFilterPos err=0 currentPosition=0 17:23:08 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:08 Filter is already there-color wheel unchanged 17:23:08 Received message from Master: op=Shutter serial=149705 17:23:08 Shutter LASER close 17:23:08 Received message from Camera: op=State serial=149707 17:23:08 GetSingleValue result=40 Value=cccccccc 17:23:08 SkyScan query 17:23:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:23:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:09 Parameters OK 17:23:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:09 Set A/D data flow result=40 17:23:09 Set A/D channel type result=40 17:23:09 Set A/D encoding result=40 17:23:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:09 Set channel filter=0.000000e+000 result=40 17:23:09 Config A/D Result=40 17:23:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:09 Get A/D filter: -9.255963e+061 result=40 17:23:09 Get A/D value=-858993460 result=40 17:23:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:09 Parameters OK 17:23:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:09 Set A/D data flow result=40 17:23:09 Set A/D channel type result=40 17:23:09 Set A/D encoding result=40 17:23:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:09 Set channel filter=0.000000e+000 result=40 17:23:09 Config A/D Result=40 17:23:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:09 Get A/D filter: -9.255963e+061 result=40 17:23:09 Get A/D value=-858993460 result=40 17:23:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:23:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:23:09 Aux= 17:23:09 Message to Camera, serial 149707 queued 17:23:45 Received message from Master: op=PointingHead serial=149720 17:23:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:23:45 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:23:46 Point started: ret=0 17:23:46 point_skyscan result=0 17:23:46 Check angles 17:23:46 SkyScan query 17:23:47 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 17:23:47 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 17:23:47 Check angles 17:23:47 SkyScan query 17:23:48 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 17:23:48 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 17:23:48 Check angles 17:23:48 SkyScan query 17:23:49 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 17:23:49 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 17:23:49 Check angles 17:23:49 SkyScan query 17:23:49 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 17:23:49 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 17:23:49 Check angles 17:23:49 SkyScan query 17:23:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 17:23:50 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 17:23:50 Check angles 17:23:50 SkyScan query 17:23:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:23:51 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:23:51 Message to Master queued w/err=0: serial=149720 error=0 17:23:56 Received message from Master: op=Filter serial=149721 17:23:56 Color wheel filter change from 0 to 0 17:23:56 FLIGetFilterPos err=0 currentPosition=0 17:23:56 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:56 Filter is already there-color wheel unchanged 17:23:56 Received message from Master: op=Shutter serial=149722 17:23:56 Shutter LASER close 17:23:56 Received message from Camera: op=State serial=149724 17:23:56 GetSingleValue result=40 Value=cccccccc 17:23:56 SkyScan query 17:23:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:23:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:57 Parameters OK 17:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:57 Set A/D data flow result=40 17:23:57 Set A/D channel type result=40 17:23:57 Set A/D encoding result=40 17:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:57 Set channel filter=0.000000e+000 result=40 17:23:57 Config A/D Result=40 17:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:57 Get A/D filter: -9.255963e+061 result=40 17:23:57 Get A/D value=-858993460 result=40 17:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:57 Parameters OK 17:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:57 Set A/D data flow result=40 17:23:57 Set A/D channel type result=40 17:23:57 Set A/D encoding result=40 17:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:57 Set channel filter=0.000000e+000 result=40 17:23:57 Config A/D Result=40 17:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:57 Get A/D filter: -9.255963e+061 result=40 17:23:57 Get A/D value=-858993460 result=40 17:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:23:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:23:57 Aux= 17:23:57 Message to Camera, serial 149724 queued 17:24:33 Received message from Master: op=PointingHead serial=149737 17:24:33 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:24:33 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:24:34 Point started: ret=0 17:24:34 point_skyscan result=0 17:24:35 Check angles 17:24:35 SkyScan query 17:24:35 SkyScan query done: ret=0 az=152.715<-10181 ze=8.205<-11453 Statuses=0009 0009 17:24:35 Msec=0 True Az=152.715 Ze=8.205 Az status=0009 Ze status=0009 17:24:35 Check angles 17:24:35 SkyScan query 17:24:36 SkyScan query done: ret=0 az=134.76<-8984 ze=-13.155<-12877 Statuses=0009 0009 17:24:36 Msec=750 True Az=134.76 Ze=-13.155 Az status=0009 Ze status=0009 17:24:36 Check angles 17:24:36 SkyScan query 17:24:37 SkyScan query done: ret=0 az=117.285<-7819 ze=-34.305<-14287 Statuses=0009 0009 17:24:37 Msec=1500 True Az=117.285 Ze=-34.305 Az status=0009 Ze status=0009 17:24:37 Check angles 17:24:37 SkyScan query 17:24:37 SkyScan query done: ret=0 az=99.885<-6659 ze=-51.585<-15439 Statuses=0009 0009 17:24:37 Msec=2250 True Az=99.885 Ze=-51.585 Az status=0009 Ze status=0009 17:24:38 Check angles 17:24:38 SkyScan query 17:24:38 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 17:24:38 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 17:24:38 Check angles 17:24:38 SkyScan query 17:24:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:24:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:24:39 Message to Master queued w/err=0: serial=149737 error=0 17:24:44 Received message from Master: op=Filter serial=149738 17:24:44 Color wheel filter change from 0 to 0 17:24:44 FLIGetFilterPos err=0 currentPosition=0 17:24:44 FLIGetStepsRemaining err=0 RemainingSteps=0 17:24:44 Filter is already there-color wheel unchanged 17:24:44 Received message from Master: op=Shutter serial=149739 17:24:44 Shutter LASER close 17:24:44 Received message from Camera: op=State serial=149741 17:24:44 GetSingleValue result=40 Value=cccccccc 17:24:44 SkyScan query 17:24:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:24:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:45 Parameters OK 17:24:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:45 Set A/D data flow result=40 17:24:45 Set A/D channel type result=40 17:24:45 Set A/D encoding result=40 17:24:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:45 Set channel filter=0.000000e+000 result=40 17:24:45 Config A/D Result=40 17:24:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:45 Get A/D filter: -9.255963e+061 result=40 17:24:45 Get A/D value=-858993460 result=40 17:24:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:45 Parameters OK 17:24:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:45 Set A/D data flow result=40 17:24:45 Set A/D channel type result=40 17:24:45 Set A/D encoding result=40 17:24:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:45 Set channel filter=0.000000e+000 result=40 17:24:45 Config A/D Result=40 17:24:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:45 Get A/D filter: -9.255963e+061 result=40 17:24:45 Get A/D value=-858993460 result=40 17:24:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:24:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:24:45 Aux= 17:24:45 Message to Camera, serial 149741 queued 17:25:22 Received message from Master: op=PointingHead serial=149754 17:25:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:25:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:25:22 Point started: ret=0 17:25:22 point_skyscan result=0 17:25:23 Check angles 17:25:23 SkyScan query 17:25:23 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.3<-17420 Statuses=0009 0009 17:25:23 Msec=0 True Az=108.99 Ze=-81.3 Az status=0009 Ze status=0009 17:25:23 Check angles 17:25:23 SkyScan query 17:25:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.66<-18844 Statuses=0008 0009 17:25:24 Msec=750 True Az=112.995 Ze=-102.66 Az status=0008 Ze status=0009 17:25:24 Check angles 17:25:24 SkyScan query 17:25:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.66<-20244 Statuses=0008 0009 17:25:25 Msec=1500 True Az=112.995 Ze=-123.66 Az status=0008 Ze status=0009 17:25:25 Check angles 17:25:25 SkyScan query 17:25:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.555<-21637 Statuses=0008 0009 17:25:26 Msec=2250 True Az=112.995 Ze=-144.555 Az status=0008 Ze status=0009 17:25:26 Check angles 17:25:26 SkyScan query 17:25:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 17:25:26 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 17:25:26 Check angles 17:25:26 SkyScan query 17:25:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:25:27 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:25:27 Message to Master queued w/err=0: serial=149754 error=0 17:25:32 Received message from Master: op=Filter serial=149755 17:25:32 Color wheel filter change from 0 to 0 17:25:32 FLIGetFilterPos err=0 currentPosition=0 17:25:32 FLIGetStepsRemaining err=0 RemainingSteps=0 17:25:32 Filter is already there-color wheel unchanged 17:25:32 Received message from Master: op=Shutter serial=149756 17:25:32 Shutter LASER open 17:25:32 Received message from Camera: op=State serial=149758 17:25:32 GetSingleValue result=40 Value=cccccccc 17:25:32 SkyScan query 17:25:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:25:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:33 Parameters OK 17:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:33 Set A/D data flow result=40 17:25:33 Set A/D channel type result=40 17:25:33 Set A/D encoding result=40 17:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:33 Set channel filter=0.000000e+000 result=40 17:25:33 Config A/D Result=40 17:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:33 Get A/D filter: -9.255963e+061 result=40 17:25:33 Get A/D value=-858993460 result=40 17:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:33 Parameters OK 17:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:33 Set A/D data flow result=40 17:25:33 Set A/D channel type result=40 17:25:33 Set A/D encoding result=40 17:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:33 Set channel filter=0.000000e+000 result=40 17:25:33 Config A/D Result=40 17:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:33 Get A/D filter: -9.255963e+061 result=40 17:25:33 Get A/D value=-858993460 result=40 17:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:25:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:25:33 Aux= 17:25:33 Message to Camera, serial 149758 queued 17:25:41 Received message from Master: op=Shutter serial=149768 17:25:41 Shutter LASER close 17:25:42 Received message from Master: op=PointingHead serial=149772 17:25:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:25:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-14 17:25:42] 17:25:42 Point started: ret=0 17:25:42 point_skyscan result=0 17:25:43 Check angles 17:25:43 SkyScan query 17:25:44 SkyScan query done: ret=0 az=88.05<-5870 ze=154.875<-1675 Statuses=0009 0009 17:25:44 Msec=0 True Az=88.05 Ze=154.875 Az status=0009 Ze status=0009 17:25:44 Check angles 17:25:44 SkyScan query 17:25:44 SkyScan query done: ret=0 az=70.275<-4685 ze=133.5<-3100 Statuses=0009 0009 17:25:44 Msec=750 True Az=70.275 Ze=133.5 Az status=0009 Ze status=0009 17:25:45 Check angles 17:25:45 SkyScan query 17:25:45 SkyScan query done: ret=0 az=52.725<-3515 ze=112.515<-4499 Statuses=0009 0009 17:25:45 Msec=1500 True Az=52.725 Ze=112.515 Az status=0009 Ze status=0009 17:25:45 Check angles 17:25:45 SkyScan query 17:25:46 SkyScan query done: ret=0 az=40.995<-2733 ze=91.605<-5893 Statuses=0008 0009 17:25:46 Msec=2250 True Az=40.995 Ze=91.605 Az status=0008 Ze status=0009 17:25:46 Check angles 17:25:46 SkyScan query 17:25:47 SkyScan query done: ret=0 az=40.995<-2733 ze=70.155<-7323 Statuses=0008 0009 17:25:47 Msec=3000 True Az=40.995 Ze=70.155 Az status=0008 Ze status=0009 17:25:47 Check angles 17:25:47 SkyScan query 17:25:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.51<-8566 Statuses=0008 0009 17:25:47 Msec=3750 True Az=40.995 Ze=51.51 Az status=0008 Ze status=0009 17:25:48 Check angles 17:25:48 SkyScan query 17:25:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:25:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:25:48 Message to Master queued w/err=0: serial=149772 error=0 17:25:53 Received message from Master: op=Filter serial=149773 17:25:53 Color wheel filter change from 0 to 0 17:25:53 FLIGetFilterPos err=0 currentPosition=0 17:25:53 FLIGetStepsRemaining err=0 RemainingSteps=0 17:25:53 Filter is already there-color wheel unchanged 17:25:53 Received message from Master: op=Shutter serial=149774 17:25:53 Shutter LASER close 17:25:53 Received message from Camera: op=State serial=149776 17:25:53 GetSingleValue result=40 Value=cccccccc 17:25:53 SkyScan query 17:25:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:25:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:54 Parameters OK 17:25:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:54 Set A/D data flow result=40 17:25:54 Set A/D channel type result=40 17:25:54 Set A/D encoding result=40 17:25:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:54 Set channel filter=0.000000e+000 result=40 17:25:54 Config A/D Result=40 17:25:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:54 Get A/D filter: -9.255963e+061 result=40 17:25:54 Get A/D value=-858993460 result=40 17:25:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:54 Parameters OK 17:25:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:54 Set A/D data flow result=40 17:25:54 Set A/D channel type result=40 17:25:54 Set A/D encoding result=40 17:25:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:54 Set channel filter=0.000000e+000 result=40 17:25:54 Config A/D Result=40 17:25:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:54 Get A/D filter: -9.255963e+061 result=40 17:25:54 Get A/D value=-858993460 result=40 17:25:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:25:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:25:54 Aux= 17:25:54 Message to Camera, serial 149776 queued 17:26:31 Received message from Master: op=PointingHead serial=149789 17:26:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:26:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:26:31 Point started: ret=0 17:26:31 point_skyscan result=0 17:26:32 Check angles 17:26:32 SkyScan query 17:26:33 SkyScan query done: ret=0 az=63.705<-4247 ze=66.525<-7565 Statuses=0009 0008 17:26:33 Msec=0 True Az=63.705 Ze=66.525 Az status=0009 Ze status=0008 17:26:33 Check angles 17:26:33 SkyScan query 17:26:33 SkyScan query done: ret=0 az=81.135<-5409 ze=66.51<-7566 Statuses=0009 0008 17:26:33 Msec=750 True Az=81.135 Ze=66.51 Az status=0009 Ze status=0008 17:26:33 Check angles 17:26:33 SkyScan query 17:26:34 SkyScan query done: ret=0 az=98.955<-6597 ze=66.495<-7567 Statuses=0009 0008 17:26:34 Msec=1500 True Az=98.955 Ze=66.495 Az status=0009 Ze status=0008 17:26:34 Check angles 17:26:34 SkyScan query 17:26:35 SkyScan query done: ret=0 az=116.475<-7765 ze=66.495<-7567 Statuses=0009 0008 17:26:35 Msec=2250 True Az=116.475 Ze=66.495 Az status=0009 Ze status=0008 17:26:35 Check angles 17:26:35 SkyScan query 17:26:36 SkyScan query done: ret=0 az=133.875<-8925 ze=66.495<-7567 Statuses=0009 0008 17:26:36 Msec=3000 True Az=133.875 Ze=66.495 Az status=0009 Ze status=0008 17:26:36 Check angles 17:26:36 SkyScan query 17:26:36 SkyScan query done: ret=0 az=151.665<-10111 ze=66.495<-7567 Statuses=0009 0008 17:26:36 Msec=3750 True Az=151.665 Ze=66.495 Az status=0009 Ze status=0008 17:26:36 Check angles 17:26:36 SkyScan query 17:26:37 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:26:37 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:26:37 Message to Master queued w/err=0: serial=149789 error=0 17:26:42 Received message from Master: op=Filter serial=149790 17:26:42 Color wheel filter change from 0 to 0 17:26:42 FLIGetFilterPos err=0 currentPosition=0 17:26:42 FLIGetStepsRemaining err=0 RemainingSteps=0 17:26:42 Filter is already there-color wheel unchanged 17:26:42 Received message from Master: op=Shutter serial=149791 17:26:42 Shutter LASER close 17:26:42 Received message from Camera: op=State serial=149793 17:26:42 GetSingleValue result=40 Value=cccccccc 17:26:42 SkyScan query 17:26:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:26:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:26:43 Parameters OK 17:26:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:26:43 Set A/D data flow result=40 17:26:43 Set A/D channel type result=40 17:26:43 Set A/D encoding result=40 17:26:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:26:43 Set channel filter=0.000000e+000 result=40 17:26:43 Config A/D Result=40 17:26:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:26:43 Get A/D filter: -9.255963e+061 result=40 17:26:43 Get A/D value=-858993460 result=40 17:26:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:26:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:26:43 Parameters OK 17:26:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:26:43 Set A/D data flow result=40 17:26:43 Set A/D channel type result=40 17:26:43 Set A/D encoding result=40 17:26:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:26:43 Set channel filter=0.000000e+000 result=40 17:26:43 Config A/D Result=40 17:26:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:26:43 Get A/D filter: -9.255963e+061 result=40 17:26:43 Get A/D value=-858993460 result=40 17:26:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:26:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:26:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:26:43 Aux= 17:26:43 Message to Camera, serial 149793 queued 17:27:20 Received message from Master: op=PointingHead serial=149806 17:27:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:27:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:27:20 Point started: ret=0 17:27:20 point_skyscan result=0 17:27:21 Check angles 17:27:21 SkyScan query 17:27:21 SkyScan query done: ret=0 az=135.15<-9010 ze=36.96<-9536 Statuses=0009 0009 17:27:21 Msec=0 True Az=135.15 Ze=36.96 Az status=0009 Ze status=0009 17:27:22 Check angles 17:27:22 SkyScan query 17:27:22 SkyScan query done: ret=0 az=117.69<-7846 ze=16.005<-10933 Statuses=0009 0009 17:27:22 Msec=750 True Az=117.69 Ze=16.005 Az status=0009 Ze status=0009 17:27:22 Check angles 17:27:22 SkyScan query 17:27:23 SkyScan query done: ret=0 az=100.305<-6687 ze=-4.92<-12328 Statuses=0009 0009 17:27:23 Msec=1500 True Az=100.305 Ze=-4.92 Az status=0009 Ze status=0009 17:27:23 Check angles 17:27:23 SkyScan query 17:27:24 SkyScan query done: ret=0 az=82.8<-5520 ze=-25.875<-13725 Statuses=0009 0009 17:27:24 Msec=2250 True Az=82.8 Ze=-25.875 Az status=0009 Ze status=0009 17:27:24 Check angles 17:27:24 SkyScan query 17:27:24 SkyScan query done: ret=0 az=65.325<-4355 ze=-38.595<-14573 Statuses=0009 0008 17:27:24 Msec=3000 True Az=65.325 Ze=-38.595 Az status=0009 Ze status=0008 17:27:25 Check angles 17:27:25 SkyScan query 17:27:25 SkyScan query done: ret=0 az=47.88<-3192 ze=-38.52<-14568 Statuses=0009 0008 17:27:25 Msec=3750 True Az=47.88 Ze=-38.52 Az status=0009 Ze status=0008 17:27:25 Check angles 17:27:25 SkyScan query 17:27:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:27:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:27:26 Message to Master queued w/err=0: serial=149806 error=0 17:27:31 Received message from Master: op=Filter serial=149807 17:27:31 Color wheel filter change from 0 to 0 17:27:31 FLIGetFilterPos err=0 currentPosition=0 17:27:31 FLIGetStepsRemaining err=0 RemainingSteps=0 17:27:31 Filter is already there-color wheel unchanged 17:27:31 Received message from Master: op=Shutter serial=149808 17:27:31 Shutter LASER close 17:27:31 Received message from Camera: op=State serial=149810 17:27:31 GetSingleValue result=40 Value=cccccccc 17:27:31 SkyScan query 17:27:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:27:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:32 Parameters OK 17:27:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:32 Set A/D data flow result=40 17:27:32 Set A/D channel type result=40 17:27:32 Set A/D encoding result=40 17:27:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:32 Set channel filter=0.000000e+000 result=40 17:27:32 Config A/D Result=40 17:27:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:32 Get A/D filter: -9.255963e+061 result=40 17:27:32 Get A/D value=-858993460 result=40 17:27:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:32 Parameters OK 17:27:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:32 Set A/D data flow result=40 17:27:32 Set A/D channel type result=40 17:27:32 Set A/D encoding result=40 17:27:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:32 Set channel filter=0.000000e+000 result=40 17:27:32 Config A/D Result=40 17:27:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:32 Get A/D filter: -9.255963e+061 result=40 17:27:32 Get A/D value=-858993460 result=40 17:27:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:27:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:27:32 Aux= 17:27:32 Message to Camera, serial 149810 queued 17:28:08 Received message from Master: op=PointingHead serial=149822 17:28:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:28:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:28:08 Point started: ret=0 17:28:08 point_skyscan result=0 17:28:09 Check angles 17:28:09 SkyScan query 17:28:09 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.67<-16578 Statuses=0009 0009 17:28:09 Msec=0 True Az=64.29 Ze=-68.67 Az status=0009 Ze status=0009 17:28:09 Check angles 17:28:09 SkyScan query 17:28:10 SkyScan query done: ret=0 az=82.23<-5482 ze=-90<-18000 Statuses=0009 0009 17:28:10 Msec=750 True Az=82.23 Ze=-90 Az status=0009 Ze status=0009 17:28:10 Check angles 17:28:10 SkyScan query 17:28:11 SkyScan query done: ret=0 az=99.585<-6639 ze=-111.015<-19401 Statuses=0009 0009 17:28:11 Msec=1500 True Az=99.585 Ze=-111.015 Az status=0009 Ze status=0009 17:28:11 Check angles 17:28:11 SkyScan query 17:28:12 SkyScan query done: ret=0 az=117.015<-7801 ze=-131.91<-20794 Statuses=0009 0009 17:28:12 Msec=2250 True Az=117.015 Ze=-131.91 Az status=0009 Ze status=0009 17:28:12 Check angles 17:28:12 SkyScan query 17:28:12 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 17:28:12 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 17:28:12 Check angles 17:28:12 SkyScan query 17:28:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 17:28:13 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 17:28:13 Message to Master queued w/err=0: serial=149822 error=0 17:28:18 Received message from Master: op=Filter serial=149823 17:28:18 Color wheel filter change from 0 to 0 17:28:18 FLIGetFilterPos err=0 currentPosition=0 17:28:18 FLIGetStepsRemaining err=0 RemainingSteps=0 17:28:18 Filter is already there-color wheel unchanged 17:28:18 Received message from Master: op=Shutter serial=149824 17:28:18 Shutter LASER close 17:28:18 Received message from Camera: op=State serial=149826 17:28:18 GetSingleValue result=40 Value=cccccccc 17:28:18 SkyScan query 17:28:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:28:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:28:19 Parameters OK 17:28:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:28:19 Set A/D data flow result=40 17:28:19 Set A/D channel type result=40 17:28:19 Set A/D encoding result=40 17:28:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:28:19 Set channel filter=0.000000e+000 result=40 17:28:19 Config A/D Result=40 17:28:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:28:19 Get A/D filter: -9.255963e+061 result=40 17:28:19 Get A/D value=-858993460 result=40 17:28:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:28:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:28:19 Parameters OK 17:28:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:28:19 Set A/D data flow result=40 17:28:19 Set A/D channel type result=40 17:28:19 Set A/D encoding result=40 17:28:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:28:19 Set channel filter=0.000000e+000 result=40 17:28:19 Config A/D Result=40 17:28:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:28:19 Get A/D filter: -9.255963e+061 result=40 17:28:19 Get A/D value=-858993460 result=40 17:28:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:28:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:28:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:28:19 Aux= 17:28:19 Message to Camera, serial 149826 queued 17:28:56 Received message from Master: op=PointingHead serial=149839 17:28:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:28:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:28:56 Point started: ret=0 17:28:56 point_skyscan result=0 17:28:57 Check angles 17:28:57 SkyScan query 17:28:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 17:28:57 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 17:28:58 Check angles 17:28:58 SkyScan query 17:28:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:28:58 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:28:58 Message to Master queued w/err=0: serial=149839 error=0 17:29:03 Received message from Master: op=Filter serial=149840 17:29:03 Color wheel filter change from 0 to 0 17:29:03 FLIGetFilterPos err=0 currentPosition=0 17:29:03 FLIGetStepsRemaining err=0 RemainingSteps=0 17:29:03 Filter is already there-color wheel unchanged 17:29:03 Received message from Master: op=Shutter serial=149841 17:29:03 Shutter LASER open 17:29:03 Received message from Camera: op=State serial=149843 17:29:03 GetSingleValue result=40 Value=cccccccc 17:29:03 SkyScan query 17:29:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:29:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:04 Parameters OK 17:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:04 Set A/D data flow result=40 17:29:04 Set A/D channel type result=40 17:29:04 Set A/D encoding result=40 17:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:04 Set channel filter=0.000000e+000 result=40 17:29:04 Config A/D Result=40 17:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:04 Get A/D filter: -9.255963e+061 result=40 17:29:04 Get A/D value=-858993460 result=40 17:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:04 Parameters OK 17:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:04 Set A/D data flow result=40 17:29:04 Set A/D channel type result=40 17:29:04 Set A/D encoding result=40 17:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:04 Set channel filter=0.000000e+000 result=40 17:29:04 Config A/D Result=40 17:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:04 Get A/D filter: -9.255963e+061 result=40 17:29:04 Get A/D value=-858993460 result=40 17:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:29:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:29:04 Aux= 17:29:04 Message to Camera, serial 149843 queued 17:29:12 Received message from Master: op=Shutter serial=149853 17:29:12 Shutter LASER close 17:29:13 Received message from Master: op=PointingHead serial=149857 17:29:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:29:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:29:13 Point started: ret=0 17:29:13 point_skyscan result=0 17:29:14 Check angles 17:29:14 SkyScan query 17:29:15 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.325<-21555 Statuses=0009 0009 17:29:15 Msec=0 True Az=135.93 Ze=-143.325 Az status=0009 Ze status=0009 17:29:15 Check angles 17:29:15 SkyScan query 17:29:15 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.34<-20156 Statuses=0009 0009 17:29:15 Msec=750 True Az=153.375 Ze=-122.34 Az status=0009 Ze status=0009 17:29:16 Check angles 17:29:16 SkyScan query 17:29:16 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.92<-18728 Statuses=0009 0009 17:29:16 Msec=1500 True Az=171.24 Ze=-100.92 Az status=0009 Ze status=0009 17:29:16 Check angles 17:29:16 SkyScan query 17:29:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.07<-17338 Statuses=0008 0009 17:29:17 Msec=2250 True Az=176.01 Ze=-80.07 Az status=0008 Ze status=0009 17:29:17 Check angles 17:29:17 SkyScan query 17:29:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.055<-15937 Statuses=0008 0009 17:29:18 Msec=3000 True Az=176.01 Ze=-59.055 Az status=0008 Ze status=0009 17:29:18 Check angles 17:29:18 SkyScan query 17:29:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:29:18 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:29:18 Message to Master queued w/err=0: serial=149857 error=0 17:29:23 Received message from Master: op=Filter serial=149858 17:29:23 Color wheel filter change from 0 to 0 17:29:23 FLIGetFilterPos err=0 currentPosition=0 17:29:23 FLIGetStepsRemaining err=0 RemainingSteps=0 17:29:23 Filter is already there-color wheel unchanged 17:29:24 Received message from Master: op=Shutter serial=149859 17:29:24 Shutter LASER close 17:29:24 Received message from Camera: op=State serial=149861 17:29:24 GetSingleValue result=40 Value=cccccccc 17:29:24 SkyScan query 17:29:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:29:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:24 Parameters OK 17:29:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:24 Set A/D data flow result=40 17:29:24 Set A/D channel type result=40 17:29:24 Set A/D encoding result=40 17:29:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:24 Set channel filter=0.000000e+000 result=40 17:29:24 Config A/D Result=40 17:29:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:24 Get A/D filter: -9.255963e+061 result=40 17:29:24 Get A/D value=-858993460 result=40 17:29:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:24 Parameters OK 17:29:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:24 Set A/D data flow result=40 17:29:24 Set A/D channel type result=40 17:29:24 Set A/D encoding result=40 17:29:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:24 Set channel filter=0.000000e+000 result=40 17:29:24 Config A/D Result=40 17:29:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:24 Get A/D filter: -9.255963e+061 result=40 17:29:24 Get A/D value=-858993460 result=40 17:29:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:29:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:29:24 Aux= 17:29:24 Message to Camera, serial 149861 queued 17:30:01 Received message from Master: op=PointingHead serial=149874 17:30:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:30:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:30:02 Point started: ret=0 17:30:02 point_skyscan result=0 17:30:02 Check angles 17:30:02 SkyScan query 17:30:03 SkyScan query done: ret=0 az=152.625<-10175 ze=-21.285<-13419 Statuses=0009 0009 17:30:03 Msec=0 True Az=152.625 Ze=-21.285 Az status=0009 Ze status=0009 17:30:03 Check angles 17:30:03 SkyScan query 17:30:04 SkyScan query done: ret=0 az=135.06<-9004 ze=-0.24<-12016 Statuses=0009 0009 17:30:04 Msec=750 True Az=135.06 Ze=-0.24 Az status=0009 Ze status=0009 17:30:04 Check angles 17:30:04 SkyScan query 17:30:04 SkyScan query done: ret=0 az=117.585<-7839 ze=20.655<-10623 Statuses=0009 0009 17:30:04 Msec=1500 True Az=117.585 Ze=20.655 Az status=0009 Ze status=0009 17:30:05 Check angles 17:30:05 SkyScan query 17:30:05 SkyScan query done: ret=0 az=100.2<-6680 ze=41.55<-9230 Statuses=0009 0009 17:30:05 Msec=2250 True Az=100.2 Ze=41.55 Az status=0009 Ze status=0009 17:30:05 Check angles 17:30:05 SkyScan query 17:30:06 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 17:30:06 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 17:30:06 Check angles 17:30:06 SkyScan query 17:30:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:30:07 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 17:30:07 Message to Master queued w/err=0: serial=149874 error=0 17:30:12 Received message from Master: op=Filter serial=149875 17:30:12 Color wheel filter change from 0 to 0 17:30:12 FLIGetFilterPos err=0 currentPosition=0 17:30:12 FLIGetStepsRemaining err=0 RemainingSteps=0 17:30:12 Filter is already there-color wheel unchanged 17:30:12 Received message from Master: op=Shutter serial=149876 17:30:12 Shutter LASER close 17:30:12 Received message from Camera: op=State serial=149878 17:30:12 GetSingleValue result=40 Value=cccccccc 17:30:12 SkyScan query 17:30:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 17:30:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:30:12 Parameters OK 17:30:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:30:12 Set A/D data flow result=40 17:30:12 Set A/D channel type result=40 17:30:12 Set A/D encoding result=40 17:30:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:30:12 Set channel filter=0.000000e+000 result=40 17:30:12 Config A/D Result=40 17:30:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:30:12 Get A/D filter: -9.255963e+061 result=40 17:30:12 Get A/D value=-858993460 result=40 17:30:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:30:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:30:12 Parameters OK 17:30:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:30:12 Set A/D data flow result=40 17:30:12 Set A/D channel type result=40 17:30:12 Set A/D encoding result=40 17:30:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:30:12 Set channel filter=0.000000e+000 result=40 17:30:12 Config A/D Result=40 17:30:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:30:12 Get A/D filter: -9.255963e+061 result=40 17:30:12 Get A/D value=-858993460 result=40 17:30:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:30:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:30:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:30:12 Aux= 17:30:12 Message to Camera, serial 149878 queued 17:30:49 Received message from Master: op=PointingHead serial=149891 17:30:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:30:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:30:50 Point started: ret=0 17:30:50 point_skyscan result=0 17:30:50 Check angles 17:30:50 SkyScan query 17:30:51 SkyScan query done: ret=0 az=109.11<-7274 ze=38.475<-9435 Statuses=0009 0008 17:30:51 Msec=0 True Az=109.11 Ze=38.475 Az status=0009 Ze status=0008 17:30:51 Check angles 17:30:51 SkyScan query 17:30:52 SkyScan query done: ret=0 az=126.54<-8436 ze=38.49<-9434 Statuses=0009 0008 17:30:52 Msec=750 True Az=126.54 Ze=38.49 Az status=0009 Ze status=0008 17:30:52 Check angles 17:30:52 SkyScan query 17:30:53 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 17:30:53 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 17:30:53 Check angles 17:30:53 SkyScan query 17:30:53 SkyScan query done: ret=0 az=161.445<-10763 ze=38.505<-9433 Statuses=0009 0008 17:30:53 Msec=2250 True Az=161.445 Ze=38.505 Az status=0009 Ze status=0008 17:30:53 Check angles 17:30:53 SkyScan query 17:30:54 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:30:54 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:30:54 Check angles 17:30:54 SkyScan query 17:30:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:30:55 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:30:55 Message to Master queued w/err=0: serial=149891 error=0 17:31:00 Received message from Master: op=Filter serial=149892 17:31:00 Color wheel filter change from 0 to 0 17:31:00 FLIGetFilterPos err=0 currentPosition=0 17:31:00 FLIGetStepsRemaining err=0 RemainingSteps=0 17:31:00 Filter is already there-color wheel unchanged 17:31:00 Received message from Master: op=Shutter serial=149893 17:31:00 Shutter LASER close 17:31:00 Received message from Camera: op=State serial=149895 17:31:00 GetSingleValue result=40 Value=cccccccc 17:31:00 SkyScan query 17:31:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:31:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:01 Parameters OK 17:31:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:01 Set A/D data flow result=40 17:31:01 Set A/D channel type result=40 17:31:01 Set A/D encoding result=40 17:31:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:01 Set channel filter=0.000000e+000 result=40 17:31:01 Config A/D Result=40 17:31:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:01 Get A/D filter: -9.255963e+061 result=40 17:31:01 Get A/D value=-858993460 result=40 17:31:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:01 Parameters OK 17:31:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:01 Set A/D data flow result=40 17:31:01 Set A/D channel type result=40 17:31:01 Set A/D encoding result=40 17:31:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:01 Set channel filter=0.000000e+000 result=40 17:31:01 Config A/D Result=40 17:31:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:01 Get A/D filter: -9.255963e+061 result=40 17:31:01 Get A/D value=-858993460 result=40 17:31:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:31:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:31:01 Aux= 17:31:01 Message to Camera, serial 149895 queued 17:31:37 Received message from Master: op=PointingHead serial=149908 17:31:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:31:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:31:38 Point started: ret=0 17:31:38 point_skyscan result=0 17:31:39 Check angles 17:31:39 SkyScan query 17:31:39 SkyScan query done: ret=0 az=152.97<-10198 ze=8.7<-11420 Statuses=0009 0009 17:31:39 Msec=0 True Az=152.97 Ze=8.7 Az status=0009 Ze status=0009 17:31:39 Check angles 17:31:39 SkyScan query 17:31:40 SkyScan query done: ret=0 az=135.57<-9038 ze=-12.27<-12818 Statuses=0009 0009 17:31:40 Msec=750 True Az=135.57 Ze=-12.27 Az status=0009 Ze status=0009 17:31:40 Check angles 17:31:40 SkyScan query 17:31:41 SkyScan query done: ret=0 az=118.05<-7870 ze=-33.225<-14215 Statuses=0009 0009 17:31:41 Msec=1500 True Az=118.05 Ze=-33.225 Az status=0009 Ze status=0009 17:31:41 Check angles 17:31:41 SkyScan query 17:31:41 SkyScan query done: ret=0 az=100.605<-6707 ze=-51.54<-15436 Statuses=0009 0009 17:31:41 Msec=2250 True Az=100.605 Ze=-51.54 Az status=0009 Ze status=0009 17:31:42 Check angles 17:31:42 SkyScan query 17:31:42 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 17:31:42 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 17:31:42 Check angles 17:31:42 SkyScan query 17:31:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:31:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:31:43 Message to Master queued w/err=0: serial=149908 error=0 17:31:48 Received message from Master: op=Filter serial=149909 17:31:48 Color wheel filter change from 0 to 0 17:31:48 FLIGetFilterPos err=0 currentPosition=0 17:31:48 FLIGetStepsRemaining err=0 RemainingSteps=0 17:31:48 Filter is already there-color wheel unchanged 17:31:48 Received message from Master: op=Shutter serial=149910 17:31:48 Shutter LASER close 17:31:48 Received message from Camera: op=State serial=149912 17:31:48 GetSingleValue result=40 Value=cccccccc 17:31:48 SkyScan query 17:31:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:31:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:49 Parameters OK 17:31:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:49 Set A/D data flow result=40 17:31:49 Set A/D channel type result=40 17:31:49 Set A/D encoding result=40 17:31:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:49 Set channel filter=0.000000e+000 result=40 17:31:49 Config A/D Result=40 17:31:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:49 Get A/D filter: -9.255963e+061 result=40 17:31:49 Get A/D value=-858993460 result=40 17:31:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:49 Parameters OK 17:31:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:49 Set A/D data flow result=40 17:31:49 Set A/D channel type result=40 17:31:49 Set A/D encoding result=40 17:31:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:49 Set channel filter=0.000000e+000 result=40 17:31:49 Config A/D Result=40 17:31:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:49 Get A/D filter: -9.255963e+061 result=40 17:31:49 Get A/D value=-858993460 result=40 17:31:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:31:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:31:49 Aux= 17:31:49 Message to Camera, serial 149912 queued 17:32:26 Received message from Master: op=PointingHead serial=149925 17:32:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:32:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:32:26 Point started: ret=0 17:32:26 point_skyscan result=0 17:32:27 Check angles 17:32:27 SkyScan query 17:32:27 SkyScan query done: ret=0 az=109.44<-7296 ze=-81.795<-17453 Statuses=0009 0009 17:32:27 Msec=0 True Az=109.44 Ze=-81.795 Az status=0009 Ze status=0009 17:32:27 Check angles 17:32:27 SkyScan query 17:32:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 17:32:28 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 17:32:28 Check angles 17:32:28 SkyScan query 17:32:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 17:32:29 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 17:32:29 Check angles 17:32:29 SkyScan query 17:32:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 17:32:30 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 17:32:30 Check angles 17:32:30 SkyScan query 17:32:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.57<-23038 Statuses=0008 0009 17:32:30 Msec=3000 True Az=112.995 Ze=-165.57 Az status=0008 Ze status=0009 17:32:30 Check angles 17:32:30 SkyScan query 17:32:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:32:31 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:32:31 Message to Master queued w/err=0: serial=149925 error=0 17:32:36 Received message from Master: op=Filter serial=149926 17:32:36 Color wheel filter change from 0 to 0 17:32:36 FLIGetFilterPos err=0 currentPosition=0 17:32:36 FLIGetStepsRemaining err=0 RemainingSteps=0 17:32:36 Filter is already there-color wheel unchanged 17:32:36 Received message from Master: op=Shutter serial=149927 17:32:36 Shutter LASER open 17:32:36 Received message from Camera: op=State serial=149929 17:32:36 GetSingleValue result=40 Value=cccccccc 17:32:36 SkyScan query 17:32:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:32:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:37 Parameters OK 17:32:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:37 Set A/D data flow result=40 17:32:37 Set A/D channel type result=40 17:32:37 Set A/D encoding result=40 17:32:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:37 Set channel filter=0.000000e+000 result=40 17:32:37 Config A/D Result=40 17:32:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:37 Get A/D filter: -9.255963e+061 result=40 17:32:37 Get A/D value=-858993460 result=40 17:32:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:37 Parameters OK 17:32:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:37 Set A/D data flow result=40 17:32:37 Set A/D channel type result=40 17:32:37 Set A/D encoding result=40 17:32:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:37 Set channel filter=0.000000e+000 result=40 17:32:37 Config A/D Result=40 17:32:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:37 Get A/D filter: -9.255963e+061 result=40 17:32:37 Get A/D value=-858993460 result=40 17:32:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:32:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:32:37 Aux= 17:32:37 Message to Camera, serial 149929 queued 17:32:45 Received message from Master: op=Shutter serial=149939 17:32:45 Shutter LASER close 17:32:46 Received message from Master: op=PointingHead serial=149943 17:32:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:32:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:32:46 Point started: ret=0 17:32:46 point_skyscan result=0 17:32:47 Check angles 17:32:47 SkyScan query 17:32:48 SkyScan query done: ret=0 az=89.805<-5987 ze=157.125<-1525 Statuses=0009 0009 17:32:48 Msec=0 True Az=89.805 Ze=157.125 Az status=0009 Ze status=0009 17:32:48 Check angles 17:32:48 SkyScan query 17:32:48 SkyScan query done: ret=0 az=72.24<-4816 ze=136.155<-2923 Statuses=0009 0009 17:32:48 Msec=750 True Az=72.24 Ze=136.155 Az status=0009 Ze status=0009 17:32:48 Check angles 17:32:48 SkyScan query 17:32:49 SkyScan query done: ret=0 az=54.69<-3646 ze=114.735<-4351 Statuses=0009 0009 17:32:49 Msec=1500 True Az=54.69 Ze=114.735 Az status=0009 Ze status=0009 17:32:49 Check angles 17:32:49 SkyScan query 17:32:50 SkyScan query done: ret=0 az=41.01<-2734 ze=93.825<-5745 Statuses=0009 0009 17:32:50 Msec=2250 True Az=41.01 Ze=93.825 Az status=0009 Ze status=0009 17:32:50 Check angles 17:32:50 SkyScan query 17:32:51 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 17:32:51 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 17:32:51 Check angles 17:32:51 SkyScan query 17:32:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 17:32:51 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 17:32:51 Check angles 17:32:51 SkyScan query 17:32:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:32:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:32:52 Message to Master queued w/err=0: serial=149943 error=0 17:32:57 Received message from Master: op=Filter serial=149944 17:32:57 Color wheel filter change from 0 to 0 17:32:57 FLIGetFilterPos err=0 currentPosition=0 17:32:57 FLIGetStepsRemaining err=0 RemainingSteps=0 17:32:57 Filter is already there-color wheel unchanged 17:32:57 Received message from Master: op=Shutter serial=149945 17:32:57 Shutter LASER close 17:32:57 Received message from Camera: op=State serial=149947 17:32:57 GetSingleValue result=40 Value=cccccccc 17:32:57 SkyScan query 17:32:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:32:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:58 Parameters OK 17:32:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:58 Set A/D data flow result=40 17:32:58 Set A/D channel type result=40 17:32:58 Set A/D encoding result=40 17:32:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:58 Set channel filter=0.000000e+000 result=40 17:32:58 Config A/D Result=40 17:32:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:58 Get A/D filter: -9.255963e+061 result=40 17:32:58 Get A/D value=-858993460 result=40 17:32:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:58 Parameters OK 17:32:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:58 Set A/D data flow result=40 17:32:58 Set A/D channel type result=40 17:32:58 Set A/D encoding result=40 17:32:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:58 Set channel filter=0.000000e+000 result=40 17:32:58 Config A/D Result=40 17:32:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:58 Get A/D filter: -9.255963e+061 result=40 17:32:58 Get A/D value=-858993460 result=40 17:32:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:32:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:32:58 Aux= 17:32:58 Message to Camera, serial 149947 queued 17:33:35 Received message from Master: op=PointingHead serial=149960 17:33:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:33:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:33:35 Point started: ret=0 17:33:35 point_skyscan result=0 17:33:36 Check angles 17:33:36 SkyScan query 17:33:37 SkyScan query done: ret=0 az=63.96<-4264 ze=66.54<-7564 Statuses=0009 0008 17:33:37 Msec=0 True Az=63.96 Ze=66.54 Az status=0009 Ze status=0008 17:33:37 Check angles 17:33:37 SkyScan query 17:33:37 SkyScan query done: ret=0 az=81.495<-5433 ze=66.51<-7566 Statuses=0009 0008 17:33:37 Msec=750 True Az=81.495 Ze=66.51 Az status=0009 Ze status=0008 17:33:37 Check angles 17:33:37 SkyScan query 17:33:38 SkyScan query done: ret=0 az=98.895<-6593 ze=66.495<-7567 Statuses=0009 0008 17:33:38 Msec=1500 True Az=98.895 Ze=66.495 Az status=0009 Ze status=0008 17:33:38 Check angles 17:33:38 SkyScan query 17:33:39 SkyScan query done: ret=0 az=116.415<-7761 ze=66.495<-7567 Statuses=0009 0008 17:33:39 Msec=2250 True Az=116.415 Ze=66.495 Az status=0009 Ze status=0008 17:33:39 Check angles 17:33:39 SkyScan query 17:33:40 SkyScan query done: ret=0 az=133.905<-8927 ze=66.495<-7567 Statuses=0009 0008 17:33:40 Msec=3000 True Az=133.905 Ze=66.495 Az status=0009 Ze status=0008 17:33:40 Check angles 17:33:40 SkyScan query 17:33:40 SkyScan query done: ret=0 az=151.275<-10085 ze=66.495<-7567 Statuses=0009 0008 17:33:40 Msec=3750 True Az=151.275 Ze=66.495 Az status=0009 Ze status=0008 17:33:40 Check angles 17:33:40 SkyScan query 17:33:41 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 17:33:41 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 17:33:41 Message to Master queued w/err=0: serial=149960 error=0 17:33:46 Received message from Master: op=Filter serial=149961 17:33:46 Color wheel filter change from 0 to 0 17:33:46 FLIGetFilterPos err=0 currentPosition=0 17:33:46 FLIGetStepsRemaining err=0 RemainingSteps=0 17:33:46 Filter is already there-color wheel unchanged 17:33:46 Received message from Master: op=Shutter serial=149962 17:33:46 Shutter LASER close 17:33:46 Received message from Camera: op=State serial=149964 17:33:46 GetSingleValue result=40 Value=cccccccc 17:33:46 SkyScan query 17:33:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:33:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:33:47 Parameters OK 17:33:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:33:47 Set A/D data flow result=40 17:33:47 Set A/D channel type result=40 17:33:47 Set A/D encoding result=40 17:33:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:33:47 Set channel filter=0.000000e+000 result=40 17:33:47 Config A/D Result=40 17:33:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:33:47 Get A/D filter: -9.255963e+061 result=40 17:33:47 Get A/D value=-858993460 result=40 17:33:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:33:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:33:47 Parameters OK 17:33:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:33:47 Set A/D data flow result=40 17:33:47 Set A/D channel type result=40 17:33:47 Set A/D encoding result=40 17:33:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:33:47 Set channel filter=0.000000e+000 result=40 17:33:47 Config A/D Result=40 17:33:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:33:47 Get A/D filter: -9.255963e+061 result=40 17:33:47 Get A/D value=-858993460 result=40 17:33:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:33:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:33:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:33:47 Aux= 17:33:47 Message to Camera, serial 149964 queued 17:34:24 Received message from Master: op=PointingHead serial=149977 17:34:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:34:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:34:24 Point started: ret=0 17:34:24 point_skyscan result=0 17:34:25 Check angles 17:34:25 SkyScan query 17:34:25 SkyScan query done: ret=0 az=134.805<-8987 ze=36.45<-9570 Statuses=0009 0009 17:34:25 Msec=0 True Az=134.805 Ze=36.45 Az status=0009 Ze status=0009 17:34:26 Check angles 17:34:26 SkyScan query 17:34:26 SkyScan query done: ret=0 az=116.97<-7798 ze=15.045<-10997 Statuses=0009 0009 17:34:26 Msec=750 True Az=116.97 Ze=15.045 Az status=0009 Ze status=0009 17:34:26 Check angles 17:34:26 SkyScan query 17:34:27 SkyScan query done: ret=0 az=99.18<-6612 ze=-6.42<-12428 Statuses=0009 0009 17:34:27 Msec=1500 True Az=99.18 Ze=-6.42 Az status=0009 Ze status=0009 17:34:27 Check angles 17:34:27 SkyScan query 17:34:28 SkyScan query done: ret=0 az=81.72<-5448 ze=-27.36<-13824 Statuses=0009 0009 17:34:28 Msec=2250 True Az=81.72 Ze=-27.36 Az status=0009 Ze status=0009 17:34:28 Check angles 17:34:28 SkyScan query 17:34:28 SkyScan query done: ret=0 az=64.215<-4281 ze=-38.58<-14572 Statuses=0009 0008 17:34:28 Msec=3000 True Az=64.215 Ze=-38.58 Az status=0009 Ze status=0008 17:34:29 Check angles 17:34:29 SkyScan query 17:34:29 SkyScan query done: ret=0 az=46.785<-3119 ze=-38.52<-14568 Statuses=0009 0008 17:34:29 Msec=3750 True Az=46.785 Ze=-38.52 Az status=0009 Ze status=0008 17:34:29 Check angles 17:34:29 SkyScan query 17:34:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:34:30 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:34:30 Message to Master queued w/err=0: serial=149977 error=0 17:34:35 Received message from Master: op=Filter serial=149978 17:34:35 Color wheel filter change from 0 to 0 17:34:35 FLIGetFilterPos err=0 currentPosition=0 17:34:35 FLIGetStepsRemaining err=0 RemainingSteps=0 17:34:35 Filter is already there-color wheel unchanged 17:34:35 Received message from Master: op=Shutter serial=149979 17:34:35 Shutter LASER close 17:34:35 Received message from Camera: op=State serial=149981 17:34:35 GetSingleValue result=40 Value=cccccccc 17:34:35 SkyScan query 17:34:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:34:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:36 Parameters OK 17:34:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:36 Set A/D data flow result=40 17:34:36 Set A/D channel type result=40 17:34:36 Set A/D encoding result=40 17:34:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:36 Set channel filter=0.000000e+000 result=40 17:34:36 Config A/D Result=40 17:34:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:36 Get A/D filter: -9.255963e+061 result=40 17:34:36 Get A/D value=-858993460 result=40 17:34:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:36 Parameters OK 17:34:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:36 Set A/D data flow result=40 17:34:36 Set A/D channel type result=40 17:34:36 Set A/D encoding result=40 17:34:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:36 Set channel filter=0.000000e+000 result=40 17:34:36 Config A/D Result=40 17:34:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:36 Get A/D filter: -9.255963e+061 result=40 17:34:36 Get A/D value=-858993460 result=40 17:34:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:34:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:34:36 Aux= 17:34:36 Message to Camera, serial 149981 queued 17:35:12 Received message from Master: op=PointingHead serial=149994 17:35:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:35:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:35:13 Point started: ret=0 17:35:13 point_skyscan result=0 17:35:14 Check angles 17:35:14 SkyScan query 17:35:14 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.355<-16557 Statuses=0009 0009 17:35:14 Msec=0 True Az=63.99 Ze=-68.355 Az status=0009 Ze status=0009 17:35:14 Check angles 17:35:14 SkyScan query 17:35:15 SkyScan query done: ret=0 az=81.825<-5455 ze=-89.745<-17983 Statuses=0009 0009 17:35:15 Msec=750 True Az=81.825 Ze=-89.745 Az status=0009 Ze status=0009 17:35:15 Check angles 17:35:15 SkyScan query 17:35:16 SkyScan query done: ret=0 az=99.69<-6646 ze=-111.12<-19408 Statuses=0009 0009 17:35:16 Msec=1500 True Az=99.69 Ze=-111.12 Az status=0009 Ze status=0009 17:35:16 Check angles 17:35:16 SkyScan query 17:35:16 SkyScan query done: ret=0 az=117.225<-7815 ze=-132.045<-20803 Statuses=0009 0009 17:35:16 Msec=2250 True Az=117.225 Ze=-132.045 Az status=0009 Ze status=0009 17:35:17 Check angles 17:35:17 SkyScan query 17:35:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 17:35:17 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 17:35:17 Check angles 17:35:17 SkyScan query 17:35:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 17:35:18 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 17:35:18 Message to Master queued w/err=0: serial=149994 error=0 17:35:23 Received message from Master: op=Filter serial=149995 17:35:23 Color wheel filter change from 0 to 0 17:35:23 FLIGetFilterPos err=0 currentPosition=0 17:35:23 FLIGetStepsRemaining err=0 RemainingSteps=0 17:35:23 Filter is already there-color wheel unchanged 17:35:23 Received message from Master: op=Shutter serial=149996 17:35:23 Shutter LASER close 17:35:23 Received message from Camera: op=State serial=149998 17:35:23 GetSingleValue result=40 Value=cccccccc 17:35:23 SkyScan query 17:35:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:35:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:35:24 Parameters OK 17:35:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:35:24 Set A/D data flow result=40 17:35:24 Set A/D channel type result=40 17:35:24 Set A/D encoding result=40 17:35:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:35:24 Set channel filter=0.000000e+000 result=40 17:35:24 Config A/D Result=40 17:35:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:35:24 Get A/D filter: -9.255963e+061 result=40 17:35:24 Get A/D value=-858993460 result=40 17:35:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:35:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:35:24 Parameters OK 17:35:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:35:24 Set A/D data flow result=40 17:35:24 Set A/D channel type result=40 17:35:24 Set A/D encoding result=40 17:35:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:35:24 Set channel filter=0.000000e+000 result=40 17:35:24 Config A/D Result=40 17:35:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:35:24 Get A/D filter: -9.255963e+061 result=40 17:35:24 Get A/D value=-858993460 result=40 17:35:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 [UTC 2018-12-14 17:35:24] 17:35:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:35:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:35:24 Aux= 17:35:24 Message to Camera, serial 149998 queued [UTC 2018-12-14 17:35:52] 17:36:01 Received message from Master: op=PointingHead serial=150011 17:36:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:36:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:36:01 Point started: ret=0 17:36:01 point_skyscan result=0 17:36:02 Check angles 17:36:02 SkyScan query 17:36:02 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 17:36:02 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 17:36:02 Check angles 17:36:02 SkyScan query 17:36:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:36:03 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:36:03 Message to Master queued w/err=0: serial=150011 error=0 17:36:08 Received message from Master: op=Filter serial=150012 17:36:08 Color wheel filter change from 0 to 0 17:36:08 FLIGetFilterPos err=0 currentPosition=0 17:36:08 FLIGetStepsRemaining err=0 RemainingSteps=0 17:36:08 Filter is already there-color wheel unchanged 17:36:08 Received message from Master: op=Shutter serial=150013 17:36:08 Shutter LASER open 17:36:08 Received message from Camera: op=State serial=150015 17:36:08 GetSingleValue result=40 Value=cccccccc 17:36:08 SkyScan query 17:36:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:36:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:36:09 Parameters OK 17:36:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:36:09 Set A/D data flow result=40 17:36:09 Set A/D channel type result=40 17:36:09 Set A/D encoding result=40 17:36:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:36:09 Set channel filter=0.000000e+000 result=40 17:36:09 Config A/D Result=40 17:36:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:36:09 Get A/D filter: -9.255963e+061 result=40 17:36:09 Get A/D value=-858993460 result=40 17:36:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:36:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:36:09 Parameters OK 17:36:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:36:09 Set A/D data flow result=40 17:36:09 Set A/D channel type result=40 17:36:09 Set A/D encoding result=40 17:36:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:36:09 Set channel filter=0.000000e+000 result=40 17:36:09 Config A/D Result=40 17:36:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:36:09 Get A/D filter: -9.255963e+061 result=40 17:36:09 Get A/D value=-858993460 result=40 17:36:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:36:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:36:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:36:09 Aux= 17:36:09 Message to Camera, serial 150015 queued 17:36:17 Received message from Master: op=Shutter serial=150025 17:36:17 Shutter LASER close 17:36:18 Received message from Master: op=PointingHead serial=150029 17:36:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:36:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:36:18 Point started: ret=0 17:36:18 point_skyscan result=0 17:36:19 Check angles 17:36:19 SkyScan query 17:36:20 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.49<-21566 Statuses=0009 0009 17:36:20 Msec=0 True Az=135.735 Ze=-143.49 Az status=0009 Ze status=0009 17:36:20 Check angles 17:36:20 SkyScan query 17:36:20 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.085<-20139 Statuses=0009 0009 17:36:20 Msec=750 True Az=153.645 Ze=-122.085 Az status=0009 Ze status=0009 17:36:21 Check angles 17:36:21 SkyScan query 17:36:21 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.13<-18742 Statuses=0009 0009 17:36:21 Msec=1500 True Az=171.225 Ze=-101.13 Az status=0009 Ze status=0009 17:36:21 Check angles 17:36:21 SkyScan query 17:36:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 17:36:22 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 17:36:22 Check angles 17:36:22 SkyScan query 17:36:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.205<-15947 Statuses=0008 0009 17:36:23 Msec=3000 True Az=176.01 Ze=-59.205 Az status=0008 Ze status=0009 17:36:23 Check angles 17:36:23 SkyScan query 17:36:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 17:36:23 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 17:36:23 Message to Master queued w/err=0: serial=150029 error=0 17:36:28 Received message from Master: op=Filter serial=150030 17:36:28 Color wheel filter change from 0 to 0 17:36:28 FLIGetFilterPos err=0 currentPosition=0 17:36:28 FLIGetStepsRemaining err=0 RemainingSteps=0 17:36:28 Filter is already there-color wheel unchanged 17:36:29 Received message from Master: op=Shutter serial=150031 17:36:29 Shutter LASER close 17:36:29 Received message from Camera: op=State serial=150033 17:36:29 GetSingleValue result=40 Value=cccccccc 17:36:29 SkyScan query 17:36:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:36:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:36:29 Parameters OK 17:36:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:36:29 Set A/D data flow result=40 17:36:29 Set A/D channel type result=40 17:36:29 Set A/D encoding result=40 17:36:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:36:29 Set channel filter=0.000000e+000 result=40 17:36:29 Config A/D Result=40 17:36:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:36:29 Get A/D filter: -9.255963e+061 result=40 17:36:29 Get A/D value=-858993460 result=40 17:36:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:36:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:36:29 Parameters OK 17:36:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:36:29 Set A/D data flow result=40 17:36:29 Set A/D channel type result=40 17:36:29 Set A/D encoding result=40 17:36:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:36:29 Set channel filter=0.000000e+000 result=40 17:36:29 Config A/D Result=40 17:36:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:36:29 Get A/D filter: -9.255963e+061 result=40 17:36:29 Get A/D value=-858993460 result=40 17:36:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:36:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:36:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:36:29 Aux= 17:36:29 Message to Camera, serial 150033 queued 17:37:05 Received message from Master: op=PointingHead serial=150045 17:37:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:37:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:37:06 Point started: ret=0 17:37:06 point_skyscan result=0 17:37:06 Check angles 17:37:06 SkyScan query 17:37:07 SkyScan query done: ret=0 az=152.625<-10175 ze=-21.39<-13426 Statuses=0009 0009 17:37:07 Msec=0 True Az=152.625 Ze=-21.39 Az status=0009 Ze status=0009 17:37:07 Check angles 17:37:07 SkyScan query 17:37:08 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.435<-12029 Statuses=0009 0009 17:37:08 Msec=750 True Az=135.165 Ze=-0.435 Az status=0009 Ze status=0009 17:37:08 Check angles 17:37:08 SkyScan query 17:37:08 SkyScan query done: ret=0 az=117.63<-7842 ze=20.535<-10631 Statuses=0009 0009 17:37:08 Msec=1500 True Az=117.63 Ze=20.535 Az status=0009 Ze status=0009 17:37:09 Check angles 17:37:09 SkyScan query 17:37:09 SkyScan query done: ret=0 az=100.245<-6683 ze=41.475<-9235 Statuses=0009 0009 17:37:09 Msec=2250 True Az=100.245 Ze=41.475 Az status=0009 Ze status=0009 17:37:09 Check angles 17:37:09 SkyScan query 17:37:10 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 17:37:10 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 17:37:10 Check angles 17:37:10 SkyScan query 17:37:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:37:11 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:37:11 Message to Master queued w/err=0: serial=150045 error=0 17:37:16 Received message from Master: op=Filter serial=150046 17:37:16 Color wheel filter change from 0 to 0 17:37:16 FLIGetFilterPos err=0 currentPosition=0 17:37:16 FLIGetStepsRemaining err=0 RemainingSteps=0 17:37:16 Filter is already there-color wheel unchanged 17:37:16 Received message from Master: op=Shutter serial=150047 17:37:16 Shutter LASER close 17:37:16 Received message from Camera: op=State serial=150049 17:37:16 GetSingleValue result=40 Value=cccccccc 17:37:16 SkyScan query 17:37:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:37:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:37:16 Parameters OK 17:37:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:37:16 Set A/D data flow result=40 17:37:16 Set A/D channel type result=40 17:37:16 Set A/D encoding result=40 17:37:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:37:16 Set channel filter=0.000000e+000 result=40 17:37:16 Config A/D Result=40 17:37:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:37:16 Get A/D filter: -9.255963e+061 result=40 17:37:16 Get A/D value=-858993460 result=40 17:37:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:37:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:37:16 Parameters OK 17:37:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:37:16 Set A/D data flow result=40 17:37:16 Set A/D channel type result=40 17:37:16 Set A/D encoding result=40 17:37:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:37:16 Set channel filter=0.000000e+000 result=40 17:37:16 Config A/D Result=40 17:37:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:37:16 Get A/D filter: -9.255963e+061 result=40 17:37:16 Get A/D value=-858993460 result=40 17:37:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:37:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:37:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:37:16 Aux= 17:37:16 Message to Camera, serial 150049 queued 17:37:55 Received message from Master: op=PointingHead serial=150062 17:37:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:37:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:37:55 Point started: ret=0 17:37:55 point_skyscan result=0 17:37:56 Check angles 17:37:56 SkyScan query 17:37:56 SkyScan query done: ret=0 az=109.32<-7288 ze=81.72<-6552 Statuses=0009 0009 17:37:56 Msec=0 True Az=109.32 Ze=81.72 Az status=0009 Ze status=0009 17:37:56 Check angles 17:37:56 SkyScan query 17:37:57 SkyScan query done: ret=0 az=112.995<-7533 ze=102.72<-5152 Statuses=0008 0009 17:37:57 Msec=750 True Az=112.995 Ze=102.72 Az status=0008 Ze status=0009 17:37:57 Check angles 17:37:57 SkyScan query 17:37:58 SkyScan query done: ret=0 az=112.995<-7533 ze=123.63<-3758 Statuses=0008 0009 17:37:58 Msec=1500 True Az=112.995 Ze=123.63 Az status=0008 Ze status=0009 17:37:58 Check angles 17:37:58 SkyScan query 17:37:58 SkyScan query done: ret=0 az=112.995<-7533 ze=144.615<-2359 Statuses=0008 0009 17:37:58 Msec=2250 True Az=112.995 Ze=144.615 Az status=0008 Ze status=0009 17:37:59 Check angles 17:37:59 SkyScan query 17:37:59 SkyScan query done: ret=0 az=112.995<-7533 ze=165.51<-966 Statuses=0008 0009 17:37:59 Msec=3000 True Az=112.995 Ze=165.51 Az status=0008 Ze status=0009 17:37:59 Check angles 17:37:59 SkyScan query 17:38:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-174.06<-23604 Statuses=0008 0009 17:38:00 Msec=3750 True Az=112.995 Ze=-174.06 Az status=0008 Ze status=0009 17:38:00 Check angles 17:38:00 SkyScan query 17:38:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.965<-23531 Statuses=0008 0008 17:38:01 Msec=4500 True Az=112.995 Ze=-172.965 Az status=0008 Ze status=0008 17:38:01 Message to Master queued w/err=0: serial=150062 error=0 17:38:06 Received message from Master: op=Filter serial=150063 17:38:06 Color wheel filter change from 0 to 2 17:38:06 FLIGetFilterPos err=0 currentPosition=0 17:38:06 FLIGetStepsRemaining err=0 RemainingSteps=0 17:38:09 FLISetFilterPos err=0 rqPosition=2 17:38:09 FLIGetStepsRemaining err=0 RemainingSteps=0 17:38:09 Check after 0.00 sec for filter wheel DIn/CWh=0 17:38:09 FLIGetFilterPos err=0 currentPosition=2 17:38:09 FLIGetStepsRemaining err=0 RemainingSteps=0 17:38:09 Received message from Master: op=Shutter serial=150064 17:38:09 Shutter LASER close 17:38:09 Received message from Camera: op=State serial=150066 17:38:09 GetSingleValue result=40 Value=cccccccc 17:38:09 SkyScan query 17:38:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:38:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:10 Parameters OK 17:38:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:10 Set A/D data flow result=40 17:38:10 Set A/D channel type result=40 17:38:10 Set A/D encoding result=40 17:38:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:10 Set channel filter=0.000000e+000 result=40 17:38:10 Config A/D Result=40 17:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:10 Get A/D filter: -9.255963e+061 result=40 17:38:10 Get A/D value=-858993460 result=40 17:38:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:10 Parameters OK 17:38:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:10 Set A/D data flow result=40 17:38:10 Set A/D channel type result=40 17:38:10 Set A/D encoding result=40 17:38:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:10 Set channel filter=0.000000e+000 result=40 17:38:10 Config A/D Result=40 17:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:10 Get A/D filter: -9.255963e+061 result=40 17:38:10 Get A/D value=-858993460 result=40 17:38:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:38:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:38:10 Aux= 17:38:10 Message to Camera, serial 150066 queued 17:38:16 Received message from Master: op=PointingHead serial=150077 17:38:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:38:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:38:16 Point started: ret=0 17:38:16 point_skyscan result=0 17:38:17 Check angles 17:38:17 SkyScan query 17:38:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:38:17 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 17:38:17 Message to Master queued w/err=0: serial=150077 error=0 17:38:22 Received message from Master: op=Filter serial=150078 17:38:22 Color wheel filter change from 2 to 2 17:38:22 FLIGetFilterPos err=0 currentPosition=2 17:38:22 FLIGetStepsRemaining err=0 RemainingSteps=0 17:38:22 Filter is already there-color wheel unchanged 17:38:23 Received message from Master: op=Shutter serial=150079 17:38:23 Shutter LASER close 17:38:23 Received message from Camera: op=State serial=150081 17:38:23 GetSingleValue result=40 Value=cccccccc 17:38:23 SkyScan query 17:38:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:38:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:23 Parameters OK 17:38:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:23 Set A/D data flow result=40 17:38:23 Set A/D channel type result=40 17:38:23 Set A/D encoding result=40 17:38:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:23 Set channel filter=0.000000e+000 result=40 17:38:23 Config A/D Result=40 17:38:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:23 Get A/D filter: -9.255963e+061 result=40 17:38:23 Get A/D value=-858993460 result=40 17:38:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:23 Parameters OK 17:38:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:23 Set A/D data flow result=40 17:38:23 Set A/D channel type result=40 17:38:23 Set A/D encoding result=40 17:38:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:23 Set channel filter=0.000000e+000 result=40 17:38:23 Config A/D Result=40 17:38:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:23 Get A/D filter: -9.255963e+061 result=40 17:38:23 Get A/D value=-858993460 result=40 17:38:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:38:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:38:23 Aux= 17:38:23 Message to Camera, serial 150081 queued 17:38:59 Received message from Master: op=PointingHead serial=150093 17:38:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:38:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:38:59 Point started: ret=0 17:38:59 point_skyscan result=0 17:39:00 Check angles 17:39:00 SkyScan query 17:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:39:01 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 17:39:01 Message to Master queued w/err=0: serial=150093 error=0 17:39:06 Received message from Master: op=Filter serial=150094 17:39:06 Color wheel filter change from 2 to 2 17:39:06 FLIGetFilterPos err=0 currentPosition=2 17:39:06 FLIGetStepsRemaining err=0 RemainingSteps=0 17:39:06 Filter is already there-color wheel unchanged 17:39:06 Received message from Master: op=Shutter serial=150095 17:39:06 Shutter LASER close 17:39:06 Received message from Camera: op=State serial=150097 17:39:06 GetSingleValue result=40 Value=cccccccc 17:39:06 SkyScan query 17:39:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:39:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:39:07 Parameters OK 17:39:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:39:07 Set A/D data flow result=40 17:39:07 Set A/D channel type result=40 17:39:07 Set A/D encoding result=40 17:39:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:39:07 Set channel filter=0.000000e+000 result=40 17:39:07 Config A/D Result=40 17:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:39:07 Get A/D filter: -9.255963e+061 result=40 17:39:07 Get A/D value=-858993460 result=40 17:39:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:39:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:39:07 Parameters OK 17:39:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:39:07 Set A/D data flow result=40 17:39:07 Set A/D channel type result=40 17:39:07 Set A/D encoding result=40 17:39:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:39:07 Set channel filter=0.000000e+000 result=40 17:39:07 Config A/D Result=40 17:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:39:07 Get A/D filter: -9.255963e+061 result=40 17:39:07 Get A/D value=-858993460 result=40 17:39:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:39:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:39:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:39:07 Aux= 17:39:07 Message to Camera, serial 150097 queued 17:39:15 Received message from Master: op=Log close serial=150111 17:39:15 Log file close 17:39:15 * END OF LOG *